Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 56
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Uncertainty in the response of sudden stratospheric warmings and stratosphere‐troposphere coupling to quadrupled CO_2 concentrations in CMIP6 models

  • Ayarzagüena Porras, Blanca
  • Charlton Pérez, Andrew
  • Butler, Amy
  • Hitchcock, Peter
  • Simpson, Isla
  • Polvani, Lorenzo
  • Butchart, Neal
  • Gerber, Edwin
  • Gray, L.
  • Hassler, Birgit
  • Lin, Pu
  • Lott, François
  • Manzini, Eliza
  • Mizuta, Ryo
  • Orbe, Clara
  • Osprey, Scott
  • Saint Martin, David
  • Sigmond, Michael
  • Taguchi, Masakuza
  • Volodin, Evgeny
  • Watanabe, Shingo
Major sudden stratospheric warmings (SSWs), vortex formation, and final breakdown dates are key highlight points of the stratospheric polar vortex. These phenomena are relevant for stratosphere‐troposphere coupling, which explains the interest in understanding their future changes. However, up to now, there is not a clear consensus on which projected changes to the polar vortex are robust, particularly in the Northern Hemisphere, possibly due to short data record or relatively moderate CO2 forcing. The new simulations performed under the Coupled Model Intercomparison Project, Phase 6, together with the long daily data requirements of the DynVarMIP project in preindustrial and quadrupled CO2 (4xCO2) forcing simulations provide a new opportunity to revisit this topic by overcoming the limitations mentioned above. In this study, we analyze this new model output to document the change, if any, in the frequency of SSWs under 4xCO2 forcing. Our analysis reveals a large disagreement across the models as to the sign of this change, even though most models show a statistically significant change. As for the near‐surface response to SSWs, the models, however, are in good agreement as to this signal over the North Atlantic: There is no indication of a change under 4xCO2 forcing. Over the Pacific, however, the change is more uncertain, with some indication that there will be a larger mean response. Finally, the models show robust changes to the seasonal cycle in the stratosphere. Specifically, we find a longer duration of the stratospheric polar vortex and thus a longer season of stratosphere‐troposphere coupling.
Digibug. Repositorio Institucional de la Universidad de Granada
Publicación Artículo científico (JournalArticle)

Imaging approach to mechanistic study of nanoparticle interactions with the blood–brain barrier

  • Bramini, Mattia|||0000-0002-0381-9391
  • Ye, Dong
  • Hallerbach, Anna
  • Nic Raghnaill, Michelle
  • Salvati, Anna
  • Åberg, Christoffer
  • Dawson, Kenneth A.
Funding for this project has been generously provided by EU FP7 via the small collaborative project NeuroNano (NNP4-SL-2008-214547) and the small collaborative project NanoTransKinetics (NMP4-2010-EU-US-266737); by the INSPIRE (Integrated NanoScience Platform for IREland) program funded by the Irish Government’s Programme for Research in Third Level Institutions, Cycle 4, National Development Plan 2007-2013; and by Science Foundation Ireland (09/RFP/MTR2425). Additionally it is based upon works supported by Science Foundation Ireland (SFI/SRC/B1155 and 12/IA/1422), EU FP7, via the Marie-Curie Initial Training Network PathChooser (PITN-GA-2013-608373) and the ESF Research Networking Programme EpitopeMap., Understanding nanoparticle interactions with the central nervous system, in particular the blood–brain barrier, is key to advances in therapeutics, as well as assessing the safety of nanoparticles. Challenges in achieving insights have been significant, even for relatively simple models. Here we use a combination of live cell imaging and computational analysis to directly study nanoparticle translocation across a human in vitro blood–brain barrier model. This approach allows us to identify and avoid problems in more conventional inferential in vitro measurements by identifying the catalogue of events of barrier internalization and translocation as they occur. Potentially this approach opens up the window of applicability of in vitro models, thereby enabling in depth mechanistic studies in the future. Model nanoparticles are used to illustrate the method. For those, we find that translocation, though rare, appears to take place. On the other hand, barrier uptake is efficient, and since barrier export is small, there is significant accumulation within the barrier., EU FP7 (NNP4-SL-2008-214547), (NMP4-2010-EU-US-266737), Irish Government’s Programme for Research in Third Level Institutions INSPIRE, Science Foundation Ireland (09/RFP/MTR2425), (SFI/SRC/B1155 and 12/IA/1422), Marie-Curie Initial Training Network PathChooser (PITN-GA-2013-608373), ESF Research Networking Programme EpitopeMap
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of the hydraulic performance of permeable pavements on a layer-by-layer basis

  • Madrazo-Uribeetxebarria, Eneko
  • Garmendia Antín, Maddi
  • Alberro Eguilegor, Gorka
  • Andrés-Doménech, Ignacio|||0000-0003-4237-4863
This research was funded by the University of the Basque Country UPV/EHU grant number US22/10. It was also supported by Donostia/San Sebastián City Council, to which we are very grateful for providing us with the material for the experimental part.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Lelek-like fans: endpoint-dense continua supporting topologically mixing maps

  • Banić, Iztok
  • Erceg, Goran
  • Jelić, Ivan
  • Kennedy, Judy
[EN] The Lelek fan is the only smooth fan that has a dense set of end-points. In this paper, we study non-smooth fans with this property; i.e., we construct an uncountable family of pairwise non-homeomorphic such fans. Furthermore, we prove that each of them admits a topologically mixing non-invertible mapping as well as a topologically mixing homeomorphism.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Flowshop with additional resources during setups: Mathematical models and a GRASP algorithm

  • Yepes-Borrero, Juan C.
  • Perea, Federico
  • Villa Juliá, Mª Fulgencia|||0000-0003-0019-8777
  • Vallada Regalado, Eva|||0000-0003-3918-1788
[EN] Machine scheduling problems arise in many production processes, and are something that needs to be consider when optimizing the supply chain. Among them, flowshop scheduling problems happen when a number of jobs have to be sequentially processed by a number of machines. This paper addressees, for the first time, the Permutation Flowshop Scheduling problem with additional Resources during Setups (PFSR-S). In this problem, in addition to the standard permutation flowshop constraints, each machine requires a setup between the processing of two consecutive jobs. A number of additional and scarce resources, e.g. operators, are needed to carry out each setup. Two Mixed Integer Linear Programming formulations and an exact algorithm are proposed to solve the PFSR-S. Due to its complexity, these approaches can only solve instances of small size to optimality. Therefore, a GRASP metaheuristic is also proposed which provides solutions for much larger instances. All the methods designed for the PFSR-S in this paper are computationally tested over a benchmark of instances adapted from the literature. The results obtained show that the GRASP metaheuristic finds good quality solutions in short computational times., Juan C. Yepes-Borrero acknowledges financial support by Colfuturo under program Credito-Beca grant number 201503877 and from ElInstituto Colombiano de Credito Educativo y Estudios Tecnicos en el Exterior - ICETEX under program Pasaporte a la ciencia - Doctor-ado, Foco-reto pais 4.2.3, grant number 3568118. This research hasbeen partially supported by the Agencia Estatal de Investigacion (AEI)and the European Regional Development's fund (ERDF): PID2020-114594GB-C21; Regional Government of Andalusia: projects FEDER-US-1256951, AT 21_00032, and P18-FR-1422; Fundacion BBVA: project Netmeet Data (Ayudas Fundacion BBVA a equipos de investigacioncientifica 2019). The authors are partially supported by Agencia Valenciana de la Innovacion (AVI) under the project ireves (innovacionen vehiculos de emergencia sanitaria): una herramienta inteligente dedecision'' (No. INNACC/2021/26) partially financed with FEDER funds(interested readers can visit http://ireves.upv.es), and by the Spanish Ministry of Science and Innovation under the project OPRES-RealisticOptimization in Problems in Public Health'' (No. PID2021-124975OB-I00), partially financed with FEDER funds. Part of the authors aresupported by the Faculty of Business Administration and Managementat Universitat Politecnica de Valencia
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessing and upgrading urban thermal resilience of a Spanish MoMo neighbourhood over the span of 1960-2080

  • Sola-Caraballo, J.
  • López-Cabeza, Victoria Patricia
  • Roa-Fernández, Jorge
  • Rivera-Gonzalez, Carlos Manuel
  • Galán-Marín, Carmen
[EN] We are currently witnessing an unprecedentedly fast change in environmental parameters for which most cities worldwide are not well prepared. One of the most characteristic urban fabrics of many European cities is the residential neighbourhood typology built in the second half of the 20th century and influenced by the Modern Movement. This study aims to develop an assessment -and -upgrading methodology of the urban microclimatic resilience of these residential neighbourhoods, using a case study for the application considering past, present, and future climatic contexts. ENVI-met software is used to examine the original layout of the case study, its evolution up to the present time and the proposal for its adaptation to the worst climatic forecasts for the end of the century, suggesting solutions to enhance thermal comfort. The results show a significant reduction in extreme warm conditions of up to 6.3 degrees C in UTCI in the worst -case scenario at the century ' s end, proving the importance of passive strategies in achieving improved urban resilience in warm cities. The methodology applied in this study can serve as a starting point for a broader analysis to be applied to different urban typologies other than the residential one and in different climatic contexts., This work has been supported by the project PID2021-124539OB-I00 funded by MCIN/AEI/10.13039/501100011033; and by "ERDF A way of making Europe", project TED2021-129347B-C21 funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR", and grant US.22-07, funded by Junta de Andalucia (Consejeria de Fomento, Articulacion del Territorio y Vivienda) , and Project AICO/2021/253 funded by Gen. of Valencia; and predoctoral contract granted to J.S.C (FPU21/02458) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Transferring landscape values using discrete choice experiments: Is meta-analysis an option?, La transferencia de los valores del paisaje mediante los experimentos de elección discreta: ¿Es el meta-análisis una opción?

  • de Ayala, Amaia
  • Mariel, Petr
  • Meyerhoff, Jürgen
[EN] Discrete Choice Experiment (DCE) is an increasingly used valuation method to guide policy-makers in their landscape management decision-making. However, due to time and budget constraints, conducting an original DCE for every single policy decision may not be possible in practice. In this context, meta-analyses are becoming a popular tool for supporting benefit transfer in environmental valuation. This paper raises the question whether meta-analysis is an option for transferring landscape values using DCEs within Europe. We argue that the use of specific and different attributes, definitions and units of measurement makes it hard to compare willingness-to-pay values across current DCE studies., [ES] Llevar a cabo un Experimento de Elección Discreta (EED) por cada decisión política relativa a la gestión de paisajes no es factible en la práctica dadas las limitaciones del tiempo y el presupuesto. El meta-análisis constituye una herramienta cada vez más utilizada para transferir los valores económicosdel medioambiente. Este trabajo plantea la cuestión de si el meta-análisis es una opción para transferir los valores de los paisajes mediante los EED en Europa. Encontramos que el uso específico y diferente de los atributos, sus definiciones y unidades de medida dificultan la comparación de las disposiciones pagar entre los EED considerados., Amaia de Ayala is grateful to the financial support from the Basque Government through a Ph.D. grant (BFI09.23). Petr Mariel acknowledges financial support from UPV/EHU Econometrics Research Group, Basque Government grant IT-642-13 and Universidad del País Vasco (UPV/EHU) under research grants UFI11/03 and US12/09
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A bulk segregant gene expression analysis of a peach population reveals components of the underlying mechanism of the fruit cold response

  • Pons Puig, Clara|||0000-0002-8296-2937
  • Forment Millet, José Javier|||0000-0002-1872-4061
  • GRANELL RICHART, ANTONIO|||0000-0003-4266-9581
  • Martí, Cristina
  • Crisosto, Carlos H.
  • Dandekar, Abhaya M.
Peach fruits subjected for long periods of cold storage are primed to develop chilling injury once fruits are shelf ripened at room temperature. Very little is known about the molecular changes occurring in fruits during cold exposure. To get some insight into this process a transcript profiling analyses was performed on fruits from a PopDG population segregating for chilling injury CI responses. A bulked segregant gene expression analysis based on groups of fruits showing extreme CI responses indicated that the transcriptome of peach fruits was modified already during cold storage consistently with eventual CI development. Most peach cold-responsive genes have orthologs in Arabidopsis that participate in cold acclimation and other stresses responses, while some of them showed expression patterns that differs in fruits according to their susceptibility to develop mealiness. Members of ICE1, CBF1/3 and HOS9 regulons seem to have a prominent role in differential cold responses between low and high sensitive fruits. In high sensitive fruits, an alternative cold response program is detected. This program is probably associated with dehydration/osmotic stress and regulated by ABA, auxins and ethylene. In addition, the observation that tolerant siblings showed a series of genes encoding for stress protective activities with higher expression both at harvest and during cold treatment, suggests that preprogrammed mechanisms could shape fruit ability to tolerate postharvest cold-induced stress. A number of genes differentially expressed were validated and extended to individual genotypes by medium-throughput RT-qPCR. Analyses presented here provide a global view of the responses of peach fruits to cold storage and highlights new peach genes that probably play important roles in the tolerance/sensitivity to cold storage. Our results provide a roadmap for further experiments and would help to develop new postharvest protocols and gene directed breeding strategies to better cope with chilling injury., This work was supported by the National Research Initiative of USDA's National Institute of Food and Agriculture (NIFA) grant # 2008-35300-04432 and US-Israel Binational Agriculture Research and Development Fund (BARD) Grant no. US-4027-07. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Stated or inferred attribute non-attendance? A simulation approach, ¿No-atención a atributos declarada o inferida? Un enfoque de simulación

  • Mariel, Petr
  • Hoyos, David
  • Meyerhoff, Jürgen
[EN] In the last few years, there has been a growing body of literature on how to detect and deal with the fact that some respondents seem to ignore one or more attributes in a discrete choice experiments. This paper aims to analyse the performance of two econometric approaches devoted to solve this problem: the stated attribute non-attendance approach and the inferred attribute non-attendance approach. These approaches are examined further by two common ways of collecting information on attribute non-attendance: serial and choice task non-attendance. The results of the simulation experiments show firstly, that choice task non-attendance of one attribute causes biases in the estimation of all other parameters; and, secondly, that only serial non-attendance can be inferred successfully. The results are policy relevant because not treating, or treating this issue incorrectly may end up in biased welfare measures., [ES] Durante los últimos años se han publicado numerosos estudios sobre cómo detectar y tratar el hecho de que algunas personas encuestadas parecen ignorar uno o más atributos en experimentos de elección discreta. Este artículo pretende analizar la efectividad de dos enfoques econométricos propuestos para resolver este problema: el enfoque de no-atención a atributos declarada, y el enfoque de no-atención a atributos inferida. La fiabilidad de ambos enfoques es posteriormente comparada en dos modoshabituales de recoger información sobre no-atención a atributos. Los resultados de los experimentos de simulación muestran en primer lugar, que la no atención específica a un atributo conlleva estimaciones sesgadas del resto de parámetros y, en segundo lugar, que tan sólo la no-atención serial puede ser inferida satisfactoriamente. Los resultados tienen relevancia de política económica puesto que no tratar o tratar incorrectamente este problema puede conllevar medidas de bienestar sesgadas., The authors acknowledge financial support from the Department of the Environment of the Basque Government, and from the Department of Education of the Basque Government, through grant IT-642-13 (UPV/EHU Econometrics Research Group), Universidad del País Vasco UPV/EHU under research grants UFI11/03, US12/09 and EHUA12/13, as well as from the German Federal Ministry of Education and Research, funding the research project, ‘Conflicts of interest over wind power: Part II choice experiments’ (Grant no. 01UN0601B).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Triple-A supply chain measurement model: validation and analysis

  • Marin-Garcia, Juan A.|||0000-0001-5416-3938
  • Alfalla-Luque, Rafaela
  • Machuca, Jose A.D.
[EN] Purpose The purpose of this paper is to establish definitions and dimensions of Triple-A supply chain (SC) variables based on a literature review and to validate a Triple-A SC measurement model using a worldwide multiple informant sample. Design/methodology/approach Following a literature review, Triple-A SC variables (agility, alignment and adaptability) are conceptualized and a list of possible items is created for their measurement. An international 309 plant sample is used to validate the convergent and criterion validities of the composites proposed to measure Triple-A SC. Findings Contributions to the literature: clarification of Triple-A SC variable concepts; identification of key dimensions of Triple-A SC variables; development of a validated Triple-A SC measurement scale for future empirical research and industrial applications. Research limitations/implications A rigorously validated instrument is needed to measure Triple-A SC variables and enable researchers to credibly test theories regarding causal links between capabilities, practices and performance. Practical implications Proposal of a scale for use by managers of different functions to analyze Triple-A SC deployment in the company. Originality/value The only Triple-A SC scale used in the previous literature has serious limitations: scales were not taken from an extended literature review; data were collected from single respondents in a single country. This is the first validated Triple-A SC measurement model to overcome these limitations., This study has been conducted within the frameworks of the following projects: 'Accion especial SGUIT-2015 (SBAPA2015-06) HPM-(Project 2015/148 U.S.)-Junta de Andalucia (Spain); PAIDI Excellence Project P08-SEJ-0384-Junta de Andalucia (Spain); and DPI2009-11148-Spanish National Program of Industrial Design and Production.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pre-symptomatic transcriptome changes during cold storage of chilling sensitive and resistant peach cultivars to elucidate chilling injury mechanisms

  • Pons Puig, Clara|||0000-0002-8296-2937
  • GRANELL RICHART, ANTONIO|||0000-0003-4266-9581
  • Dagar, Anurag
  • Martí Ibáñez, María Cristina
  • Singh, Vikram
  • Crisosto, Carlos H.
  • Friedman, Haya
  • Lurie, Susan
Background: Cold storage induces chilling injury (CI) disorders in peach fruit (woolliness/mealiness, flesh browning and reddening/bleeding) manifested when ripened at shelf life. To gain insight into the mechanisms underlying CI, we analyzed the transcriptome of 'Oded' (high tolerant) and 'Hermoza' (relatively tolerant to woolliness, but sensitive to browning and bleeding) peach cultivars at pre-symptomatic stages. The expression profiles were compared and validated with two previously analyzed pools (high and low sensitive to woolliness) from the Pop-DG population. The four fruit types cover a wide range of sensitivity to CI. The four fruit types were also investigated with the ROSMETER that provides information on the specificity of the transcriptomic response to oxidative stress. Results: We identified quantitative differences in a subset of core cold responsive genes that correlated with sensitivity or tolerance to CI at harvest and during cold storage, and also subsets of genes correlating specifically with high sensitivity to woolliness and browning. Functional analysis indicated that elevated levels, at harvest and during cold storage, of genes related to antioxidant systems and the biosynthesis of metabolites with antioxidant activity correlates with tolerance. Consistent with these results, ROSMETER analysis revealed oxidative stress in 'Hermoza' and the progeny pools, but not in the cold resistant 'Oded'. By contrast, cold storage induced, in sensitivity to woolliness dependant manner, a gene expression program involving the biosynthesis of secondary cell wall and pectins. Furthermore, our results indicated that while ethylene is related to CI tolerance, differential auxin subcellular accumulation and signaling may play a role in determining chilling sensitivity/tolerance. In addition, sugar partitioning and demand during cold storage may also play a role in the tolerance/sensitive mechanism. The analysis also indicates that vesicle trafficking, membrane dynamics and cytoskeleton organization could have a role in the tolerance/sensitive mechanism. In the case of browning, our results suggest that elevated acetaldehyde related genes together with the core cold responses may increase sensitivity to browning in shelf life. Conclusions: Our data suggest that in sensitive fruit a cold response program is activated and regulated by auxin distribution and ethylene and these hormones have a role in sensitivity to CI even before fruit are cold stored., This research was funded by US-Israel Binational Agriculture Research and Development Fund (BARD) Grant no. US-4027-07. We thank the European Science Foundation for Short Term Scientific Mission grants to A. Dagar (COST Action 924, reference codes COST-STSM-924-04254 and Quality Fruit COST FA1106 for networking.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

El control coalicional en el marco de la teoría de juegos cooperativos, Coalitional control in the framework of cooperative game theory

  • Muros, F. J.
[EN] Coalitional control is a fairly new branch of distributed control where the agents merge dynamically into coalitions according to the enabled/disabled communication links at each time instant. Therefore, with these schemes there is a reduction of the communication burden without compromising the system performance. In this tutorial, the main features of these schemes will be introduced in the framework of cooperative game theory, being the game related to the cost function that is optimized by the control approach, and with the players corresponding to either the communication links or the agents involved. In this context, several cooperative game theory tools will be considered in order to: rank the players, impose constraints on them, provide more effcient ways of calculation, perform system partitioning, etc., hence analyzing the main features related to each tool., [ES] El control coalicional es una rama incipiente del control distribuido donde los distintos agentes se agrupan de forma dinámica en coaliciones en función de los enlaces de comunicación activos/inactivos en cada instante de tiempo. Gracias a ello, se reduce la carga de comunicación sin comprometer las prestaciones del sistema. En este tutorial, se analizan las principales características de estos esquemas dentro del marco de la teoría de juegos cooperativos, estando el juego definido por la función de coste a optimizar en el esquema de control, y correspondiendo los jugadores bien a los enlaces de comunicación o bien a los propios agentes. En este contexto, se estudiarán diversas herramientas de teoría de juegos cooperativos, con objeto de clasificar jugadores, imponer restricciones en los mismos, proponer vías de cálculo más eficientes, realizar particionado de sistemas, etc., examinando las características más relevantes presentadas por cada herramienta., Este estudio ha sido parcialmente financiado por los proyectos de investigación OCONTSOLAR, (H2020 ADG-ERC, ID 789051), C3PO (MINECO, DPI2017-86918-R), y GESVIP (Junta de Andalucía, US-1265917). Asimismo, se agradece a Jose María Maestre, Encarnación Algaba y Eduardo F. Camacho las innumerables discusiones mantenidas a lo largo de los anos de doctorado que me ayudaron a dominar los conceptos presentados en este tutorial. Es también de destacar los comentarios del Editor y los revisores anónimos que han contribuido a la mejora sustancial del manuscrito. Finalmente, se dedica este artículo a Lloyd S. Shapley (1923-2016), ya que su concepto de solución (Shapley, 1953b) ha inspirado todo mi trabajo.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Estimación de la fenología de la vegetación a partir de imágenes de satélite: el caso de la península ibérica e islas Baleares (2001-2017), Vegetation phenology from satellite imagery: the case of the Iberian Peninsula and Balearic Islands (2001-2017)

  • Caparros-Santiago, J.A.
  • Rodríguez-Galiano, V.F.
[EN] Phenological dynamics of vegetation is considered as an important biological indicator for understanding the functioning of terrestrial ecosystems. Land surface phenology (LSP), the study of vegetation phenology from time series of vegetation indices (IV), has provided a comprehensive overview of ecosystem dynamics. Iberian Peninsula is one of the regions with the greatest diversity of ecosystems in European continent. It is therefore an excellent study area for monitoring phenological dynamics of vegetation. The aim of this study is to analyse the spatial variability of the phenology of the vegetation of the Iberian Peninsula and Balearic Islands for the period 2001-2017. NDVI (Normalized Difference Vegetation Index) time series were generated from the surface reflectance product MOD09Q1 at a spatial resolution of 250 meters and with a composite period of 8 days. Atmospheric disturbances and noise were reduced using a Savitzky-Golay smoothing filter. Different phenological metrics or phenometrics were extracted using a threshold-based method. Results showed the existence of a different behaviour between spring and autumn phenophases in the Atlantic and Mediterranean biogeographic regions. The Mediterranean mountainous areas showed a similar phenological behaviour to the Atlantic vegetation. Biogeographic regions showed an internal variability, which may be derived from the different behaviour of land covers (e.g., natural vegetation vs. crops)., [ES] La dinámica fenológica de la vegetación es considerada un importante indicador biológico para comprender el funcionamiento de los ecosistemas terrestres. La fenología de la superficie terrestre (Land Surface phenology; LSP), el estudio de la fenología de la vegetación a partir de series temporales de índices de vegetación (IV), ha proporcionado una visión integral de la dinámica de los ecosistemas. La península ibérica es una de las regiones con mayor diversidad de ecosistemas del continente europeo. Constituye, por lo tanto, una excelente área de estudio para la monitorización de la dinámica fenológica de la vegetación. El objetivo de este estudio es analizar la variabilidad espacial de la fenología de la vegetación de la península ibérica e islas Baleares para el periodo 2001-2017. Las series temporales de NDVI (Normalized Difference Vegetation Index) fueron generadas a partir del producto de reflectancia de superficie MOD09Q1 a una resolución espacial de 250 metros y con un periodo de compuesto de 8 días. Las perturbaciones atmosféricas y el ruido de las series temporales fueron atenuadas aplicando el algoritmo de suavizado de Savitzky-Golay. Las diferentes métricas fenológicas o fenométricas fueron extraídas usando un método basado en umbrales. Los resultados pusieron de manifiesto la existencia de un comportamiento diferenciado entre las fenofases de primavera y otoño en las regiones biogeográficas atlántica y mediterránea. Las zonas montañosas mediterráneas presentaron un comportamiento fenológico similar a la vegetación atlántica. La variabilidad interna de cada región biogeográfica también puede asociarse al diferente comportamiento entre cubiertas del suelo (e.g. vegetación natural vs. cultivos)., El primer autor es un contratado pre-doctoral FPU financiado por el "Ministerio de Universidades" (Referencia FPU15/03758). Los autores agradecen el apoyo de los proyectos RTI2018-096561-A-I00 y US-1262552, financiados por el Ministerio de Ciencia e Innovación y la Agencia Estatal de Investigación / FEDER - Junta de Andalucía (Consejería de Economía y Conocimiento), respectivamente.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

ECTS credits and quality: evidence for public policy reform

  • Velazquez, L.
  • Atenas, B.
  • Hernandez, N. Cruz
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
[EN] This study examines the impact of ECTS credit allocation on student academic performance and quality assurance indicators in higher education. Using the VAC methodology - an evidence-based framework within the field of Curriculum Analytics - we analyze nineteen STEM degree programs at the Universidad de Sevilla (Spain) based on academic data from 2015 to 2020. Our findings reveal substantial inconsistencies in credit allocation, highlighting curriculum misalignments that negatively impact student performance, completion rates, and time-to-degree averages. We show that public policies such as Royal Decree 822/2021 promote uniform credit structures (e.g. 6-ECTS courses and 240-ECTS programs) that do not correspond to students' actual formative needs. These rigid regulations hinder the implementation of necessary curricular reforms and contribute to disparities in performance indicators across programs. We advocate for credit estimation methods grounded in academic data and predictive modeling, rather than in subjective perceptions of student workload. The VAC methodology offers a replicable and scalable approach for addressing these challenges and serves as a valuable tool for evidence-informed policy design in higher education., This work has been partially funded by VII Plan Propio de Investigacion de la Universidad de Sevilla, III.3 A [US-III.3A-2023-03-24] and Universitat Politecnica de Valencia [PIME/23-24/374].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modelling runoff from permeable pavements: a link to the Curve Number method

  • Madrazo-Uribeetxebarria, Eneko
  • Garmendia Antín, Maddi
  • Almandoz-Berrondo, Jabier
  • Andrés-Doménech, Ignacio|||0000-0003-4237-4863
[EN] Permeable Pavement (PP) models are valuable tools for studying the implementation of PPs in urban environments. However, the runoff simulated by traditional models such as the Curve Number (CN) is different from that created with PP models, as infiltration is computed differently. However, many investigations compare the runoff created by both models to extract broader conclusions without considering how the two models are related. Hence, this research explores the relation between runoff simulated by one general model, selecting the widespread CN model as a baseline, and the PP model provided in the Storm Water Management Model (SWMM). Correlation was set using the hydrograph created with the CN in a single event as a baseline and obtaining the best pavement permeability value from the PP model by calibration. The influence of storm depth, pavement slope, catchment shape, and PP type was also analysed. Calibration was conducted based on the Nash-Sutcliffe coefficient, but peak and volume performances were also studied. The results show that it is possible to link runoff hydrographs computed with the PP model to those created with the CN method, although that relation is not useful for the entire CN range. That relation is practical for CNs higher than 88 and shall be helpful for urban planners and researchers to compare several pervious/impervious scenarios in urban drainage models more robustly. One direct application is to compare the runoff computed by both models without changing the method that simulates runoff. It shall be enough to change a unique parameter that can be linked to a certain imperviousness by the CN., This research was funded by the University of the Basque Country UPV/EHU grant number US22/10.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pelarspovirus, a new genus of plant viruses within family Tombusviridae

  • Scheets, Kay
  • Jordan, Ramon
  • White, K. Andrew
  • HERNANDEZ FORT, CARMEN
[EN] Currently, the family Tombusviridae encompasses thirteen viral genera that contain single-stranded, positive-sense RNA genomes and isometric virions; the exception being the genus Umbravirus, whose members do not encode a coat protein (CP). A new genus, tentatively named Pelarspovirus, is proposed to be added to this family and would include five members, with Pelargonium line pattern virus recommended as the type species. Viruses assigned to this proposed genus have monopartite genomes encoding five open reading frames (ORFs) that include two 50 -proximal replication proteins, two centrally located movement proteins (MP1 and MP2) and a 30 - proximal CP that, at least for pelargonium line pattern virus (PLPV), has been shown to act also as suppressor of RNA silencing. Distinguishing characteristics of these viruses include i) production of a single, tricistronic subgenomic RNA for expression of MP and CP genes, ii) presence of a non-AUG start codon (CUG or GUG) initiating the MP2 ORF, iii) absence of AUG codons in any frame between the AUG initiation codons of MP1 and CP genes, and iv) sequence-based phylogenetic clustering of all encoded proteins in separate clades from those of other family members., Research at the C. H. laboratory was supported by grant BFU2012-36095 from the Ministerio de Economia y Competitividad (MINECO, Spain). Pelargonium virus research at the R. J. laboratory was supported through funding from Binational Agricultural Research and Development Fund Project No. US-2336-93R and United States Department of Agriculture, Agricultural Research Service, Research Project No. 8020-22000-032-00D (and its predecessors). Research in the laboratory of K.A.W. is supported by the Natural Sciences and Engineering Research Council of Canada. Research in the K.S. laboratory on tombusvirid phylogeny was supported by National Science Foundation EPSCoR grant EPS-0447262.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Developing and understanding Leaching-Resistant cobalt nanoparticles via N/P incorporation for liquid phase hydroformylation

  • Galdeano-Ruano, Carmen Piedad
  • Lopes, Christian W.
  • Mazarío, Jaime
  • Chinchilla, Lidia E.
  • Agostini, Giovanni
  • Calvino, JJ
  • Holgado, Juan P.
  • Rodriguez-Castellon, Enrique
  • Roldan, Alberto
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] The ultimate target in heterogeneous catalysis is the achievement of robust, resilient and highly efficient materials capable of resisting industrial reaction conditions. Pursuing that goal in liquid -phase hydroformylation poses a unique challenge due to carbon monoxide -induced metal carbonyl species formation, which is directly related to the formation of active homogeneous catalysts by metal leaching. Herein, supported heteroatomincorporated (P and N) Co nanoparticles were developed to enhance the resistance compared with bare Co nanoparticles. The samples underwent characterization using operando XPS, XAS and HR electron microscopy. Overall, P- and N -doped catalysts increased reusability and suppressed leaching. Among the studied catalysts, the one with N as a dopant, CoNx@NC, presents excellent catalytic results for a Co -based catalyst, with a 94% conversion and a selectivity to aldehydes of 80% in only 7.5 h. Even under milder conditions, this catalyst outperformed existing benchmarks in Turnover Numbers (TON) and productivity. In addition, computational simulations provided atomistic insights, shedding light on the remarkable resistance of small Co clusters interacting with N -doped carbon patches., The authors thank the financial support from the Spanish Government (RTI2018-096399-A-I00, PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41, TED2021-130756B-C31 and TED2021-130191B-C44, PID2020-119946RB-I00, US-1263455 funded by MCIN/AEI/10.13039/501100011033 and European Union Next- GenerationEU/PRTR) . This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 101022507. HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. We also acknowledge the supercomputing Wales for access to the Hawk HPC facility, part-funded by the European Regional Development Fund via the Welsh Government.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Triple-A and competitive advantage in supply chains: Empirical research in developed countries

  • Alfalla-Luque, Rafaela
  • Dominguez Machuca, José Antonio
  • Marin-Garcia, Juan A.|||0000-0001-5416-3938
[EN] Based on his own experience in a number of companies, Lee (2004) posits that the Triple-A (agility, adaptability and alignment) is essential for supply chain (SC) management to achieve a sustainable competitive advantage (CA). However, there is a lack of empirical research that analyzes the Triple-A SC and its impacts on CA. The objective of the present work is to address this omission and to provide empirical evidence on this topic using a multiple-informant, international sample from eight developed countries. A consistent partial least squares structural equation model (PLSc) is used on data for 151 manufacturing plants in three industrial sectors to determine whether agility, alignment and adaptability have individual and/or joint effects on achieving a CA in SCs. In relation to the individual effects, different CAs are achieved by each of the Triple-A variables. SC adaptability has been shown to have a significant positive relationship with all the dimensions of CA. SC alignment affects most of these dimensions, but SC agility only affects financial CA and flexibility CA. This research does, however, confirm the positive relationship for the joint effect of the Triple-A SC variables and CA. The effects are significant on all the CA measures except quality. Important implications can be drawn for managers by showing how SC levers can be set to improve performance indicators., This study has been conducted within the frameworks of the following projects: Accion especial SGUIT-2015 (SBAPA2015-06) HPM(Project 2015/148 U.S.)-Junta de Andalucia (Spain); PAIDI Excellence Project P08-SEJ-0384-Junta de Andalucia (Spain); and DPI2009-11148Spanish National Program of Industrial Design and Production
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Smart Shoe Insole Based on Polydimethylsiloxane Composite Capacitive Sensors

  • Luna Perejón, Francisco
  • Salvador Domínguez, Blas
  • Pérez Peña, Fernando
  • Rodríguez Corral, José María
  • Escobar Linero, Elena
  • Morgado Estévez, Arturo
Nowadays, the study of the gait by analyzing the distribution of plantar pressure is a well-established technique. The use of intelligent insoles allows real-time monitoring of the user. Thus, collecting and analyzing information is a more accurate process than consultations in so-called gait laboratories. Most of the previous published studies consider the composition and operation of these insoles based on resistive sensors. However, the use of capacitive sensors could provide better results, in terms of linear behavior under the pressure exerted. This behavior depends on the properties of the dielectric used. In this work, the design and implementation of an intelligent plantar insole composed of capacitive sensors is proposed. The dielectric used is a polydimethylsiloxane (PDMS)-based composition. The sensorized plantar insole developed achieves its purpose as a tool for collecting pressure in different areas of the sole of the foot. The fundamentals and details of the composition, manufacture, and implementation of the insole and the system used to collect data, as well as the data samples, are shown. Finally, a comparison of the behavior of both insoles, resistive and capacitive sensor-equipped, is made. The prototype presented lays the foundation for the development of a tool to support the diagnosis of gait abnormalities., 22 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Colonization Dynamics of Potential Stowaways Inhabiting Marinas: Lessons from Caprellid Crustaceans

  • Revanales del Pino, Andrea Triana
  • Guerra-Garcia, Jose Manuel
  • Ros Clemente, Macarena
Despite the fact that stowaway transport is an increasingly common invasion pathway, its key ecological aspects, such as colonization dynamics of potential invaders on human transport vectors, are poorly understood. Considering that marinas may function as stepping-stone habitats for the spread of marine invaders, they provide a unique opportunity for understanding the first steps in the stowaway pathway. One of the dominant groups inhabiting marinas are caprellid crustaceans. These small invertebrates have demonstrated a high potential for introduction and establishment far beyond their distribution range. Here, we analyzed the colonization dynamics of caprellid species inhabiting marinas of Cadiz Bay (Spain) on plastic collectors and discussed their implications on invasion success. We found that collectors largely mirrored the resident caprellid community assemblages after just one month of deployment, showing that caprellid species inhabiting marina structures have a high capacity to colonize new artificial substrates. Moreover, the two non-indigenous species found, Caprella scaura and Paracaprella pusilla, successfully established dense and well-structured populations in the collectors (including all sex/age groups considered). We suggest a potential interplay between colonization ability and stowaway organisms' invasion success. Furthermore, collectors used are supported as a useful tool in the early detection of non-indigenous species and their monitoring in relation to resident species.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Effect of green infrastructures supported by adaptative solar shading systems on livability in open spaces

  • Palomo Amores, Teresa Rocío
  • Sánchez Ramos, José
  • Cerezo Narváez, Alberto
  • Guerrero Delgado, MCarmen
  • Castro Medina, Daniel
  • Álvarez Domínguez, Servando
Lack of thermal comfort in the existing building stock in many warm summer climates and the COVID-19 pandemic have increased residents' temporary occupation of urban open spaces. However, climate change and other effects such as urban heat islands are also negatively affecting the livability of these spaces. Therefore, strategies are needed to improve the thermal conditions in these areas. In this context, the research designs, simulates and assesses an urban green infrastructure supported by an adaptative solar shading system. For this purpose, a public square to be renovated in Seville (Spain) is chosen. After an analysis of the current situation, more vegetation is added. However, trees are not planted fully grown, so their cover is not enough in the short term and an artificial system that protects from the sun by casting shade and that adapts to both their growth and the seasons is included. The urban space is characterized by on-site measurements, proposing four (initial, intermediates and final) scenarios using computational fluid dynamics simulations in an holistic microclimate modelling system. In turn, changes in thermal comfort are analyzed using the COMFA model. Results show that the air and surface temperature are decreased, reducing the number of hours in discomfort by 21% thanks to incorporating the green structure and by 30% due to the vegetation. It can be concluded that the use of these temporary urban prostheses enables urban spaces regenerated with vegetation to be enjoyed without waiting 20 or 30 years for the trees to mature, encouraging people to spend more time outdoors from the start of the intervention., 19 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Segmentation of scanning-transmission electron microscopy images using the ordered median problem

  • Calvino Gámez, José Juan
  • López Haro, Miguel
  • Muñoz Ocaña, Juan Manuel
  • Puerto, Justo
  • Rodríguez Chía, Antonio Manuel
This paper presents new models for segmentation of 2D and 3D Scanning-Transmission Electron Micro- scope images based on the ordered median function. The main advantage of using this function is its good adaptability to the different types of images to be studied due to the wide range of weight vec- tors that can be cast. Classical segmentation models stand out for their ability to provide a segmentation of the original image very quickly and with low computational burden. However, they do not usually achieve high quality segmentations with a small number of clusters in order to classify the different ele- ments which compose the structure represented in the image. The quality of the segmentation provided by our approach is analysed using different choices of the weight vector in some real instances. More- over, improvements are proposed for the formulations to reduce the computational time needed to solve these problems by taking advantage of the weight vector structure, The authors have been partially supported by projects PID2020-114594GB-{C21, C22}, PID2020-1130 06RB-I0 0, PID2019- 110 018GA-I0 0, MAT2017-87579-R funded by MCIN/AEI/ 10.13039/50110 0 011033 and project NetmeetData Fundacion BBVA convocatoria 2019. This work has been co-funded by the 2014–2020 ERDF Operational Programme and by the Depart- ment of Economy, Knowledge, Business and University of the Regional Government of Andalusia; projects FEDER-UCA18-106895, FEDER-UCA18-107139, FEDER-US-1256951 and P18-FR-1422.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Capítulo o parte de un libro (BookPart)

Wage discrimination against women with disabilities: Myth or reality?, Discriminación salarial de las mujeres con discapacidad: ¿mito o realidad?

  • Ribes Moreno, María Isabel
Dentro del análisis global sobre la situación de las mujeres con discapacidad que se realiza en la monografía en la que se inserta este estudio, este trabajo desarrolla un profundo análisis de la discriminación retributiva de las mujeres con discapacidad en perspectiva comparada, en el marco de los Estados miembros de la Unión Europea. La aportación ha exigido una investigación sobre las distintas políticas salariales en dicho ámbito, sistematizando las diferencias y similitudes entre Estados y exponiendo conclusiones en relación con la brecha salarial de las mujeres con y sin discapacidad en el empleo. En este aspecto el trabajo hace referencia a dos iniciativas normativas de la Unión Europea, como son la Directiva (UE) 2022/2041 sobre salarios mínimos adecuados y la propuesta de Directiva sobre transparencia retributiva, valorando su contenido respecto de normas españolas cuyo propósito es garantizar el principio de igualdad salarial en el empleo como son el RD 902/2020, de igualdad retributiva entre mujeres y hombres y la Ley 15/2022, integral para la igualdad de trato y no discriminación. Se trata de una investigación innovadora que identifica la necesidad de incorporar determinados factores en las estadísticas, con el propósito de reconocer la problemática que afecta al colectivo y dar soluciones apropiadas para eliminar la brecha salarial, Within the overall analysis of the situation of women with disabilities carried out in the monograph in which this study is included, the applicant has carried out an in-depth analysis of pay discrimination against women with disabilities in a comparative perspective, within the framework of the Member States of the European Union. The contribution has required research into the different wage policies in this area, systematising the differences and similarities between States and drawing conclusions in relation to the wage gap between women with and without disabilities in employment. In this aspect, the work refers to two European Union regulatory initiatives, such as Directive (EU) 2022/2041 on adequate minimum wages and the proposed Directive on pay transparency, assessing their content in relation to Spanish regulations aimed at guaranteeing the principle of equal pay in employment, such as Royal Decree 902/2020 on equal pay for women and men and Law 15/2022 on equal treatment and non-discrimination. This is an innovative research that identifies the need to incorporate certain factors in the statistics, with the aim of recognising the problems affecting this group and providing appropriate solutions to eliminate the pay gap.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Impact of the soil-foundation-structure interaction in the seismic behaviour of a heritage masonry tower: The Giralda of Seville

  • Romero Sánchez, Emilio
  • Requena García de la Cruz, María Victoria
  • Morales Esteban, A.
The seismic safety of heritage buildings may be affected by the interaction between the soil, the foundation and the structure, which is usually neglected in conventional seismic assessments. These factors are particularly important in the case of slender constructions, such as masonry towers, over soft strata. Hence, this work deals with the influence of the soil-foundation-structure interaction in the seismic behaviour of complex heritage masonry towers. The investigations have been carried out considering the case study of the Giralda tower in Seville, Spain. The region is an earthquake-prone area, characterised by far away very large earthquakes with long-return periods. The Giralda tower is a slender brick unreinforced masonry tower, 95 m high and about 13 m wide. It features a high artistic value and popularity as it has been the historical symbol of the city. It was declared a UNESCO Word Heritage Site of Outstanding Universal Value in 1987. Apart from its slenderness, the tower presents some other seismic vulnerabilities: openings irregularities, material heterogeneity and the position of a belfry on the top. Furthermore, the building is placed on soft alluvial strata and has a shallow foundation. Likewise, the tower has a considerable weight, which has caused large settlements. A thorough evaluation of the soil, the foundation and the structure has been carried out to develop a complex and detailed finite element model. Macro mechanical elements and the direct method have been used to develop the numerical model of the tower in the OpenSees framework. Free ambient vibration tests and non-destructive experiments have been used to calibrate the model. Its dynamic behaviour has been evaluated considering the seismic action suggested by the Spanish Code and those determined through a seismic response analysis, bearing in mind different return periods and considering real ground motions. Finally, the numerical results showed that the effect of the soil and the foundation have a significant impact on the seismic behaviour of the bell tower, amplifying the acceleration and its damage at the top.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Actores y prácticas documentales de interacción entre los Cabildos y las Cajas Reales de hacienda rioplatenses en el período colonial, ACTORS AND DOCUMENTARY PRACTICES IN THE INTERACTION BETWEEN THE RIVER PLATE CITY COUNCILS AND THE ROYAL TREASURY FUNDS DURING THE COLONIZATION

  • Caño Ortigosa, José Luis
En este trabajo hacemos un primer acercamiento a los documentos más utilizados en la interacción entre los Cabildos Seculares y las Cajas Reales durante el período colonial. Se concreta en el caso rioplatense, del que se presentan sus singularidades a partir de la investigación realizada en archivos nacionales y locales. El objetivo que se plantea no es desde una perspectiva diplomática, sino identificar cómo se utilizaron esos instrumentos burocráticos por parte de la Corona y de las instituciones básicas de gobierno, justicia y hacienda dentro de las tensiones y equilibrios propios entre control estatal y autonomía local.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

A mathematical programming approach to overlapping community detection

  • Benati, Stefano
  • Puerto, Justo
  • Rodríguez Chía, Antonio Manuel
  • Temprano, Francisco
We propose a new optimization model to detect overlapping communities in networks. The model elaborates suggestions contained in Zhang et al. (2007), in which overlapping communities were identified through the use of a fuzzy membership function, calculated as the outcome of a mathematical programming problem. In our approach, we retain the idea of using both mathematical programming and fuzzy membership to detect overlapping communities, but we replace the fuzzy objective function proposed there with another one, based on the Newman and Girvan's definition of modularity. Next, we formulate a new mixed-integer linear programming model to calculate optimal overlapping communities. After some computational tests, we provide some evidence that our new proposal can fix some biases of the previous model, that is, its tendency of calculating communities composed of almost all nodes. Conversely, our new model can reveal other structural properties, such as nodes or communities acting as bridges between communities. Finally, as mathematical programming can be used only for moderate size networks due to its computation time, we proposed two heuristic algorithms to solve the largest instances, that compare favourably to other methodologies. (c) 2022 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Cost-sensitive probabilistic predictions for support vector machines

  • Benítez-Peña, Sandra
  • Blanquero, Rafael
  • Carrizosa, Emilio
  • Ramírez Cobo, Josefa
Support vector machines (SVMs) are widely used and constitute one of the best examined and used machine learning models for two-class classification. Classification in SVM is based on a score procedure, yielding a deterministic classification rule, which can be transformed into a probabilistic rule (as implemented in off-the-shelf SVM libraries), but is not probabilistic in nature. On the other hand, the tuning of the regularization parameters in SVM is known to imply a high computational effort and generates pieces of information that are not fully exploited, not being used to build a probabilistic classification rule. In this paper we propose a novel approach to generate probabilistic outputs for the SVM. The new method has the following three properties. First, it is designed to be cost-sensitive, and thus the different importance of sensitivity (or true positive rate, TPR) and specificity (true negative rate, TNR) is readily accommodated in the model. As a result, the model can deal with imbalanced datasets which are common in operational business problems as churn prediction or credit scoring. Second, the SVM is embedded in an ensemble method to improve its performance, making use of the valuable information generated in the parameters tuning process. Finally, the probabilities estimation is done via bootstrap estimates, avoiding the use of parametric models as competing approaches. Numerical tests on a wide range of datasets show the advantages of our approach over benchmark procedures.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

The soft-margin Support Vector Machine with ordered weighted average

  • Marín, Alfredo
  • Martínez Merino, Luisa Isabel
  • Puerto, Justo
  • Rodríguez Chía, Antonio Manuel
This paper deals with a cost sensitive extension of the standard Support Vector Machine (SVM) using an ordered weighted sum of the deviations of misclassified individuals with respect to their corresponding supporting hyperplanes. In contrast with previous heuristic approaches, an exact method that applies the ordered weighted average operator in the classical SVM model is proposed. Specifically, when weights are sorted in non-decreasing order, a quadratic continuous formulation is developed. For general weights, a mixed integer quadratic formulation is proposed. In addition, our results prove that nonlinear kernel functions can be also applied to these new models extending its applicability beyond the linear case. Extensive computational results reported in the paper show that the predictive performance provided by the proposed exact solution approaches are better than the ones provided by the classical models (linear and nonlinear kernel) and similar or better than the previous ones provided by the heuristic solution by Maldonado et al. (2018). © 2021 The Authors, Alfredo Marín has been supported by Spanish Ministry of Science and Innovation under project PID2019-110886RB-I00 . Part of this research was conducted while he was on sabbatical at Universidad de Sevilla, Spain . Luisa I. Martínez-Merino, Antonio M. Rodríguez-Chía and Justo Puerto thank the Agencia Estatal de Investigación (AEI) and the European Regional Development’s funds (ERDF) : project PID2020-114594GB-C21/C22 ; Regional Government of Andalusia : projects FEDER-UCA18-106895 , FEDER-US-1256951 and P18-FR-1422 ; and Fundación BBVA : project NetmeetData (Ayudas Fundación BBVA a equipos de investigación científica 2019). Luisa I. Martínez-Merino has been supported by Subprograma Juan de la Cierva Formación 2019 ( FJC2019-039023-I ) and PAIDI 2020 postdoctoral fellowship financed by European Social Fund and Junta de Andalucía
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Constraint relaxation for the discrete ordered median problem

  • Ponce, Diego
  • Martínez Merino, Luisa Isabel
  • Puerto, Justo
This paper compares different exact approaches to solve the Discrete Ordered Median Problem (DOMP). In recent years, DOMP has been formulated using set packing constraints giving rise to one of its most promising formulations. The use of this family of constraints, known as strong order constraints (SOC), has been validated in the literature by its theoretical properties and because their linear relaxation provides very good lower bounds. Furthermore, embedded in branch-and-cut or branch-price-and-cut procedures as valid inequalities, they allow one to improve computational aspects of solution methods such as CPU time and use of memory. In spite of that, the above mentioned formulations require to include another family of order constraints, e.g., the weak order constraints (WOC), which leads to coefficient matrices with elements other than {0,1}. In this work, we develop a new approach that does not consider extra families of order constraints and furthermore relaxes SOC -in a branch-and-cut procedure that does not start with a complete formulation- to add them iteratively using row generation techniques to certify feasibility and optimality. Exhaustive computational experiments show that it is advisable to use row generation techniques in order to only consider {0,1}-coefficient matrices modeling the DOMP. Moreover, we test how to exploit the problem structure. Implementing an efficient separation of SOC using callbacks improves the solution performance. This allows us to deal with bigger instances than using fixed cuts/constraints pools automatically added by the solver in the branch-and-cut for SOC, concerning both the formulation based on WOC and the row generation procedure., 24 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Changes in Adhesion and the Expression of Adhesion Molecules in PBMCs after Aneurysmal Subarachnoid Hemorrhage: Relation to Cerebral Vasospasm

  • Revilla González, Gonzalo
  • Varela, Lourdes María
  • Ruiz de Azua-López, Zaida
  • Amaya Villar, Rosario
  • Pezzotti, María Rosa
  • Castro, María José
  • Ureña, Juan
  • González Montelongo, María del Carmen
  • Castellano, Antonio
Aneurysmal subarachnoid hemorrhage (aSAH) is a neurovascular disease produced by extravasation of blood to the subarachnoid space after rupture of the cerebral vessels. After bleeding, the immune response is activated. The role of peripheral blood mononuclear cells (PBMCs) in this response is a current subject of research. We have analysed the changes in PBMCs of patients with aSAH and their interaction with the endothelium, focusing on their adhesion and the expression of adhesion molecules. Using an in vitro adhesion assay, we observed that the adhesion of PBMCs of patients with aSAH is increased. Flow cytometry analysis shows that monocytes increased significantly in patients, especially in those who developed vasospasm (VSP). In aSAH patients, the expression of CD162, CD49d, CD62L and CD11a in T lymphocytes and of CD62L in monocytes increased. However, the expression of CD162, CD43, and CD11a decreased in monocytes. Furthermore, monocytes from patients who developed arteriographic VSP had lower expression of CD62L. In conclusion, our results confirm that after aSAH, monocyte count and adhesion of PBMCs increase, especially in patients with VSP, and that the expression of several adhesion molecules is altered. These observations can help predict VSP and to improve the treatment of this pathology.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Empirical Bayes fairness in linear regression

  • Carrizosa, Emilio
  • Jiménez-Llamas, Rafael
  • Ramírez Cobo, Josefa
Bias in data may lead to prediction procedures which discriminate individuals from sensitive groups. In this paper we propose a Bayesian method for parameter estimation in the linear regression model taking fairness into ac- count. For a given prior structure, namely, the Normal-Gamma prior, for a specific choice of unfairness measure (which does not require the use of private -sensitive- information), our method computes a constrained empirical Bayes estimator that induces fairness in posterior predictions. Specifically, the model hyper-parameters are calculated as the optimal solution of a constrained optimization problem: that in which the marginal likelihood is maximized in a region where the unfairness measure is upper bounded and thus, controlled. This guarantees that average posterior predictions are, at most, as unfair as the upper bound establishes. Experi- ments with synthetic and real data sets show the competitiveness of our approach in terms of fairness in the obtained solution and prediction error.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electron beam evaporated vs. magnetron sputtered nanocolumnar porous stainless steel: Corrosion resistance, wetting behavior and anti-bacterial activity

  • Bobaru, Stefania
  • Rico, Víctor J.
  • García-Valenzuela, Aurelio
  • López-Santos, Carmen
  • González-Elipe, Agustín R.
Stainless steel (SS), widely used because of its outstanding corrosion protection properties, does not possess any particular anti-stain or anti-bacterial activity as required for household and sanitary applications. This work reports the fabrication of SS thin films that, keeping a similar corrosion resistance than the bulk material, presents hydrophobicity and anti-bacterial activity. These thin films are prepared at ambient temperature by physical vapor deposition (PVD), either electron beam evaporation (EBE) or magnetron sputtering (MS), at oblique angles (OAD). According to their scanning electron microcopy and atomic force microscopy analysis, the microstructure of the OAD-SS thin films consisted of tilted and separated nanocolumns defining a surface topology that, characterized by a high percentage of void space, varied with the deposition conditions and procedure, either EBE or MS. It has been shown that particularly the nanocolumnar MS-OAD thin films preserved and even improved the high corrosion resistance of compact SS, as determined by electrochemical analysis. Besides, all OAD-SS thin films depict hydrophobicity and a high antibacterial activity. These features, particularly remarkable for the MS-OAD thin films, have been related with their tip-like termination at the surface and the existence of large void spaces separating the nanocolumns. This topology appears to affect negatively the bacteria’s deployment onto the surface and therefore the survival rate. Differences in the corrosion and antibacterial performance between EBE and MS-OAD thin films have been related with the specificities of these two PVD methods of thin film preparation. A relatively high abrasion resistance, as determined by abrasion tests, supports the use of MS-OAD thin films for the protection of commodity materials., Authors thank the FEDER program and AEI-MICINN (PID2019- 110430GB-C21, PID2019-109603RA-I0 and PID2020-112620GB-I00), the Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía (PAIDI-2020 through projects US-1263142, ref. AT17-6079, P18-RT-3480), and the EU through cohesion fund and FEDER 2014–2020 programs for financial support. The projects leading to this article have received funding from the EU H2020 Program under the grant agreements 899352 (FETOPEN-01-2018-2019-2020 - SOUNDofICE). One of us (SB) acknowledges the support of the Marie Curie Program of the EU to carry out this work. BSH is acknowledged for having proposed this work and contributed to its realization. CLS thanks the University of Seville through the VI PPIT-US., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Steam-enhanced calcium-looping performance of limestone for thermochemical energy storage: The role of particle size

  • Arcenegui-Troya, J.
  • Sánchez-Jiménez, Pedro E.
  • Perejón, Antonio
  • Valverde, José M.
  • Pérez-Maqueda, Luis A.
Steam injection has been proposed to attenuate the decay of CaO reactivity during calcium looping (CaL) under operating conditions compatible with carbon capture and storage. However, it is yet unknown whether the perceived advantages granted by steam hold under the distinct operating conditions required for the integration of the CaL process as a thermochemical energy storage system in Concentrating Solar Power Plants (CaL-CSP). Here, we study the influence of steam in conditions compatible with a CaL-CSP scheme and assess its impact when injected only during one stage; either calcination or carbonation, and also when it is present throughout the entire loop. The results presented here demonstrate that steam boosts the CaO multicycle performance in a CO2 closed loop to attain residual conversion values similar to those achieved at moderate temperatures under inert gas. Moreover, it is found that the enhancement in multicycle activity is more pronounced for larger particles., This work has been supported by the Spanish Government Agency Ministerio de Economía y Competitividad-FEDER (contracts CTQ2017- 83602-C2-1-R and -2-R) and Junta de Andalucía and Universidad de Sevilla (Programa Operativo FEDER Andalucía 2014–2020, projects P18-FR-1087 and US-1262507). We acknowledge the funding received by the European Union's Horizon 2020 research and innovation programme under grant agreement No. 727348, project SOCRATCES. Financial support received from Junta de Andalucía-Consejería de Economía, Conocimiento, Empresas y Universidad via a postdoctoral fellowship with reference DOC_00044 is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Determination of the time vonstant distribution of a defect-ventric time-dependent variability model for sub-100-nm FETs

  • Saraza-Canflanca, P.
  • Castro-López, Rafael
  • Roca, Elisenda
  • Martín-Martínez, Javier
  • Rodríguez, Rosana
  • Nafría, Montserrat
  • Fernández, Francisco V.
The origin of some time-dependent variability phenomena in FET technologies has been attributed to the charge carrier trapping/detrapping activity of individual defects present in devices. Although some models have been presented to describe these phenomena from the so-called defect-centric perspective, limited attention has been paid to the complex process that goes from the experimental data of the phenomena up to the final construction of the model and all its components, specifically the one that pertains to the time constant distribution. This article presents a detailed strategy aimed at determining the defect time constant distribution, specifically tailored for small area devices, using data obtained from conventional characterization procedures., This work was supported by grants PID2019-103869RB-C31 and PID2019-103869RB-C32 funded by MCIN/AEI/10.13039/501100011033, and by Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía and P.O. FEDER under project US-1380876., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Impact of BTI and HCI on the reliability of a Majority Voter

  • Santana-Andreo, A.
  • Roca, Elisenda
  • Castro-López, Rafael
  • Fernández, Francisco V.
Trabajo presentado a la 18th International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design (SMACD), celebrada en Sardinia (Italia) del 12 al 15 de junio de 2022., Triple Modular Redundancy is a commonly used hardware technique in mission- and safety-critical systems to ensure reliability. Although a simple circuit, the majority voter can be the weak link in this system and different designs have been proposed to increase its robustness to single event effects and permanent faults. However, no study has been performed to analyze the effect of Bias Temperature Instability (BTI) and Hot Carrier Injection (HCI) on a majority voter, which can lead to timing failures or exacerbate other failure mechanisms like single-event upsets (SEUs). This work uses a state-of-the-art aging simulator to estimate the effects of aging on a majority voter., This work was supported by grant PID2019-103869RB-C31 funded by MCIN/AEI/10.13039/501100011033 and by Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía and P.O. FEDER under project US-1380876. Andrés Santana Andreo was supported by grant PRE-2020-093167 funded by MCIN/AEI/10.13039/501100011033, and by “ESF Investing in your future”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

A novel Physical Unclonable Function using RTN

  • Camacho-Ruiz, Eros
  • Castro-López, Rafael
  • Roca, Elisenda
  • Brox, Piedad
  • Fernández, Francisco V.
Trabajo presentado al IEEE International Symposium on Circuits and Systems (ISCAS), celebrado en Austin, Texas (USA) del 27 de mayo al 1 de junio de 2022., Copyright IEEE, PUFs have emerged as an alternative to traditional Non-Volatile Memories in the field of hardware security. In this paper, a novel PUF is proposed that uses the Random Telegraph Noise phenomenon as the underlying source of entropy. This phenomenon manifests as discrete and random shifts in the drain current of transistors and it is characterized by several parameters like the number of the defects in the device, as well as the emission and capture time constants and current shifts of these defects. Using the recently reported Maximum Current Fluctuation metric, it is possible to condense all this information and use it for the PUF design. By forming pairs of transistors, measuring, and comparing their Maximum Current Fluctuation over a given time interval, we demonstrate using numerical experiments that it is possible to obtain a PUF. Furthermore, the results reported here show that this RTN-based PUF matches, and even out-performs, other silicon PUFs in terms of uniqueness, unpredictability, and reliability with an evident advantage in silicon area., This work was supported by grant PID2019-103869RB-C31 funded by MCIN/AEI/ 10.13039/501100011033, and by Junta de Andalucía and P.O. FEDER under project US-1380876. Eros Camacho acknowledges MIU for supporting his research activity through the grant FPU20/03008., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Characterization and analysis of BTI and HCI effects in CMOS current mirrors

  • Santana-Andreo, A.
  • Martín-Lloret, P.
  • Roca, Elisenda
  • Castro-López, Rafael
  • Fernández, Francisco V.
Trabajo presentado a la 18th International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design (SMACD), celebrada en Sardinia (Italia) del 12 al 15 de junio de 2022., This paper presents experimental results on the aging-induced degradation of CMOS current mirrors fabricated in a 65-nm CMOS technology. A dedicated integrated circuit array with custom test structures allowing for accelerated aging tests is used for the characterization, including several geometries of simple current mirrors, in PMOS and NMOS versions. The bi-directional link between device degradation and bias conditions that comes into play during circuit aging, as well as the permanent degradation, are both reported and analyzed., This work was supported by grant PID2019-103869RB-C31 funded by MCIN/AEI/10.13039/501100011033, and by Junta de Andalucía and by P.O. FEDER under project US-1380876. Andrés Santana Andreo was supported by grant PRE-2020-093167 funded by MCIN/AEI/10.13039/501100011033, and by “ESF Investing in your future”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

High-level design of a novel PUF based on RTN

  • Camacho-Ruiz, Eros
  • Castro-López, Rafael
  • Roca, Elisenda
  • Fernández, Francisco V.
Trabajo presentado a la 18th International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design (SMACD), celebrada en Sardinia (Italia) del 12 al 15 de junio de 2022., Physically Unclonable Functions (PUFs) have emerged as an alternative to traditional Non-Volatile Memories in the field of lightweight hardware security. Recently, a novel PUF has been presented that uses the Random Telegraph Noise (RTN) phenomenon as the underlying source of entropy. While, in general, the nature of that entropy source largely dictates the quality of a PUF, little attention is often paid, however, to how the PUF architecture and its building blocks impact the PUF quality. This paper addresses the high-level design of the novel PUF to ascertain the extent of that impact and refine the building blocks specifications to mitigate it. Using high-level numerical and mixed-signal electrical simulations, the results demonstrate that it is very important to account for non-idealities in the PUF's building blocks to prevent PUF quality degradation., This work was supported by grant PID2019-103869RB-C31 funded by MCIN/AEI/ 10.13039/501100011033, and by Junta de Andalucía and P.O. FEDER under project US-1380876. Eros Camacho acknowledges MIU for supporting his research activity through the grant FPU20/03008., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

On the use of an RTN simulator to explore the quality trade-offs of a novel RTN-based PUF

  • Camacho-Ruiz, Eros
  • Santana-Andreo, A.
  • Castro-López, Rafael
  • Roca, Elisenda
  • Fernández, Francisco V.
Trabajo presentado a la 18th International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design (SMACD), celebrada en Sardinia (Italia) del 12 al 15 de junio de 2022., Physical Unclonable Functions (PUFs) use variability as an entropy source from which to generate secure authentication and identification. While most silicon PUFs exploit the well-known Time-Zero Variability of CMOS technologies, the lack of efficient simulation tools for the Time-Dependent Variability (TDV) has left the potential benefits of this other kind of variability largely unexplored. However, recent advances in the field are allowing this exploration to begin. The objective of this paper is then to take a recently reported simulation tool to design a novel PUF that uses the Random Telegraph Noise (RTN), a TDV phenomenon, as the underlying entropy source. In the ensuing analysis, essential design guidelines are provided to best exploit such entropy source with factors like transistor biasing and sizing., This work was supported by grant PID2019-103869RB-C31 funded by MCIN/AEI/ 10.13039/501100011033, and by Junta de Andalucía and P.O. FEDER under project US-1380876. Eros Camacho acknowledges MIU for supporting his research activity through the grant FPU20/03008. Grant PRE- 2020-093167 is funded by MCIN/AEI/ 10.13039/501100011033, and by “ESF Investing in your future”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Characterizing Aging Degradation of Integrated Circuits with a Versatile Custom Array of Reliability Test Structures

  • Santana-Andreo, A.
  • Martín-Lloret, P.
  • Roca, Elisenda
  • Castro-López, Rafael
  • Fernández, Francisco V.
Trabajo presentado a la 34th International Conference on Microelectronic Test Structures (ICMTS), celebrada en Cleveland, Ohio (USA) del 21 al 23 de marzo de 2022., This work presents an integrated circuit array with custom test structures for the characterization of aging phenomena that includes three types of commonly-used circuits: inverters, single-stage amplifiers, and current mirrors. The array allows the characterization of these circuit blocks through a wide variety of metrics and different accelerated stress and operating conditions. This characterization clearly shows the stochastic nature of aging and the importance of a dedicated test structure to fully understand it at the circuit level., This work was supported by grant PID2019-103869RB-C31 funded by MCIN/AEI/10.13039/501100011033 and by Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía and P.O. FEDER under project US-1380876. Andrés Santana Andreo was supported by grant PRE-2020-093167 funded by MCIN/AEI/10.13039/501100011033, and by “ESF Investing in your future”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

A systematic approach to RTN parameter fitting based on the Maximum Current Fluctuation

  • Saraza-Canflanca, P.
  • Martín-Martínez, Javier
  • Roca, Elisenda
  • Castro-López, Rafael
  • Rodríguez, Rosana
  • Nafría, Montserrat
  • Fernández, Francisco V.
Trabajo presentado a la 18th International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design (SMACD), celebrada en Sardinia (Italia) del 12 al 15 de junio de 2022., This paper addresses the automated parameter extraction of Random Telegraph Noise (RTN) models in nanoscale field-effect transistors. Unlike conventional approaches based on complex extraction of current levels and timing of trapping/de-Trapping events from individual defects in current traces, the proposed approach performs a simple processing of current traces. A smart optimization problem formulation allows getting distribution functions of the amplitude of the current shifts and of the number of active defects vs. time., This work was supported in part by grants PID2019-103869RB-C31 and PID2019-103869RB-C32 funded by MCIN/AEI/ 10.13039/501100011033, and by grant US-1380876 funded by Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía and P.O. FEDER ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

A Smart SRAM-Cell Array for the Experimental Study of Variability Phenomena in CMOS Technologies

  • Saraza-Canflanca, P.
  • Carrasco-López, H.
  • Santana-Andreo, A.
  • Díaz-Fortuny, Javier
  • Castro-López, Rafael
  • Roca, Elisenda
  • Fernández, Francisco V.
Trabajo presentado al IEEE International Reliability Physics Symposium (IRPS), celebrado en Dallas, Texas (USA) del 27 al 31 de marzo de 2022., Time-Dependent Variability phenomena can have a considerable impact on circuit performance, especially for deeply-scaled technologies. To account for this, these phenomena need to be characterized and modelled. Such characterization is often performed at the device level first. Then, the model extracted from such characterization should be validated at the circuit level. To this end, this paper presents a novel chip fabricated in a 65-nm technology that contains an array of 6T SRAM cells. This chip includes some features that make it especially adequate for the characterization of the impact of Time-Dependent Variability phenomena. To demonstrate this adequacy, different tests have been performed to evaluate how Time-Dependent Variability phenomena impact several relevant performance metrics of SRAM cells., This work was supported by AEI under Project PID2019-103869RB-C31/AEI/10.13039/501100011033, and by Junta de Andalucia and P.O. FEDER under project US-1380876. Andrés Santana Andreo acknowledges MICINN for supporting his research activity through the predoctoral grant PRE‑2020‑093167., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Challenges and solutions to the defect-centric modeling and circuit simulation of time-dependent variability

  • Martín-Martínez, Javier
  • Díaz-Fortuny, Javier
  • Saraza-Canflanca, P.
  • Rodríguez, Rosana
  • Castro-López, Rafael
  • Roca, Elisenda
  • Fernández, Francisco V.
  • Nafría, Montserrat
Trabajo presentado en el 2023 IEEE International Reliability Physics Symposium (IRPS), 26-30 March 2023, Monterey, CA, USA. Copyright IEEE., Time-Dependent Variability (TDV) phenomena represent a serious concern for device and circuit reliability. To address the TDV impact at circuit level, Reliability-Aware Design (RAD) tools can be used by circuit designers to achieve more reliable circuits. However, this is not a straightforward task, since the development of RAD tools comprises several steps such as the characterization, modeling and simulation of TDV phenomena. Furthermore, in deeply-scaled CMOS technologies, TDV reveals a stochastic nature that can complicate those steps. In this invited paper, we review some of the main challenges that appear in each step of the flow towards the development of RAD tools, providing our solutions to them., This work was supported in part by MCIN/AEI/ 10.13039/501100011033 under Grant PID2019-103869RB-C31 and Grant PID2019-103869RB-C32; and in part by the Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía and P.O. FEDER under Project US-1380876., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Excellent cryogenic magnetocaloric properties in heavy rare-earth based HRENiGa2 (HRE = Dy, Ho, or Er) compounds

  • Guo, D.
  • Moreno-Ramírez, Luis M.
  • Law, Jia Yan
  • Zhang, Y.
  • Franco, V.
RENiX2 compounds, where RE = rare-earth element and X = p-block element, have been highly regarded for cryogenic magnetocaloric applications. Depending on the elements, they can crystallize in CeNiSi2-type, NdNiGa2-type, or MgCuAl2-type crystal structures, showing different types of magnetic ordering and thus affect their magnetic properties. Regarding the magnetocaloric effect, MgCuAl2-type aluminides show larger values than those of the CeNiSi2-type silicides and the NdNiGa2-type gallides due to the favored ferromagnetic ground state. However, RENiGa2 gallides can crystallize in either NdNiGa2- or MgCuAl2-type structures depending on the RE element. In this work, we select heavy RE (HRE) elements for exploring the microstructure, magnetic ordering and magnetocaloric performance of HRENiGa2 (HRE = Dy, Ho or Er) gallides. They all crystallize in the desired MgCuAl2-type crystal structure which undergoes a second-order transition from ferro- to para-magnetic state with increasing temperature. The maximum isothermal entropy change (∣∆Sisomax∣) values are 6.2, 10.4, and 11.4 J kg−1 K−1 (0–5 T) for DyNiGa2, HoNiGa2, and ErNiGa2, respectively, which are comparable to many recently reported cryogenic magnetocaloric materials. Particularly, the excellent magnetocaloric properties of HoNiGa2 and ErNiGa2 compounds, including their composite, fall in the temperature range that enables them for the in-demand hydrogen liquefaction systems., This work was supported by the National Natural Science Foundation of China (52071197), the Science and Technology Commission of Shanghai Municipality (19ZR1418300 and 19DZ2270200), the Independent Research and Development Project of State Key Laboratory of Advanced Special Steel, Shanghai Key Laboratory of Advanced Ferrometallurgy, Shanghai University (SKLASS 2021-Z05), Grant PID2019- 105720RB-I00 funded by MCIN/AEI/10.13039/501100011033, US/JUNTA/FEDER-UE (US-1260179), and Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía (P18-RT-746). Guo D would like to acknowledge the support provided by China Scholarship Council (CSC) of the Ministry of Education, China (202006890050). Moreno-Ramírez LM acknowledges a postdoctoral fellowship from Junta de Andalucía and European Social Fund (ESF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning light emission in Bi and V codoped MgAl2O4 nanostructured films

  • Gorni, Giulio
  • Serna, Rosalía
  • García-López, J.
  • Gonzalo de los Reyes, J.
This study investigates the synthesis of novel Bi and V-codoped MgAl2O4 nanostructured thin films for near-white-light emission upon UV excitation. Sequential pulsed laser deposition (PLD) from Bi, V, and MgAl2O4 targets was employed to prepare nanostructured films with different compositions. The films have been thoroughly analyzed using Rutherford backscattering spectrometry (RBS), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and photoluminescence spectroscopy (PL). Upon heat treatments at 500 °C and 800 °C, the films exhibit a broad blue emission in Bi-doped films and a broad yellow emission in V-doped films, respectively. We demonstrate that a strategic combination of Bi and V codoping in MgAl2O4 nanostructures results in near-white light emission. This study highlights the ability to finely control the nanostructure and emission properties of thin films using PLD, and the use of abundant and non-toxic elements to produce white light emission, with significant implications for advanced and sustainable photonic applications., This work was funded by the Spanish Research Agency (AEI, Ministry of Science, Innovation and Universities) and the European Regional Development Fund (ERDF) under grant PID2021-123190OB-I00, and by the CSIC (PIE-202050E195 and project 2021AEP128IO). Giulio Gorni acknowledges Grant FJC2020-044866-I funded by MCIN/AEI/ 10.13039/501100011033, by Plan de recuperacion, transformacion y resiliencia, and by the “European Union NextGenerationEU/PRTR”. The CNA acknowledges the Spanish Ministry of Science, Innovation and Universities for grant number ICTS-2020-02 US-4 (FEDER/EU)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

On the multisource hyperplanes location problem to fitting set of points

  • Blanco, V.
  • Japón, A.
  • Ponce, D.
  • Puerto, J.
In this paper we study the problem of locating a given number of hyperplanes minimizing an objective function of the closest distances from a set of points. We propose a general framework for the problem in which norm-based distances between points and hyperplanes are aggregated by means of ordered median functions. A compact Mixed Integer Linear (or Non Linear) programming formulation is presented for the problem and also an extended set partitioning formulation with a huge number of variables is derived. We develop a column generation procedure embedded within a branch-and-price algorithm for solving the problem by adequately performing its preprocessing, pricing and branching. We also analyze geometrically the optimal solutions of the problem, deriving properties which are exploited to generate initial solutions for the proposed algorithms. Finally, the results of an extensive computational experience are reported. The issue of scalability is also addressed showing theoretical upper bounds on the errors assumed by replacing the original datasets by aggregated versions.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

All-optical seeding of a light-induced phase transition with correlated disorder

  • Johnson, Allan S.
  • Pastor, Ernest
  • Batlle-Porro, Sergi
  • Benzidi, Hind
  • Katayama, Tetsuo
  • de la Peña Muñoz, Gilberto A.
  • Krapivin, Viktor
  • Kim, Sunam
  • López, Núria
  • Trigo, Mariano
  • Wall, Simon E.
Ultrafast manipulation of vibrational coherence provides a route to control the structure of solids. However, this strategy can only induce long-range correlations and cannot modify atomic structure locally, which is a requirement for many technological applications such as non-volatile electronics. Here we demonstrate that ultrafast lasers can generate incoherent structural fluctuations that are more efficient for material control than coherent vibrations, extending optical control to a wide range of materials. We observe that local non-equilibrium lattice distortions generated by a weak laser pulse reduce the energy barrier to switch between insulating and metallic states in vanadium dioxide. Seeding inhomogeneous structural fluctuations presents an alternative, more energy-efficient, route for controlling materials that may be applicable to all solids, including those used in data- and energy-storage devices.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Turismo y política urbana: rehabilitación, turistificación y transformación del tejido comercial del Centro Histórico de Málaga, Tourism and Urban Policy: rehabilitation, touristification, and transformation of the commercial fabric of Malaga’s Historic Centre

  • Santos-Izquierdo, Fátima
  • Blanco-Vílchez, Mario
  • Romero Padilla, Yolanda
Este estudio analiza el proceso de especialización turística que están experimentando los centros históricos de las ciudades occidentales a través del caso de Málaga. El objetivo es examinar cómo las políticas de regeneración urbana han contribuido a la turistificación del espacio en general y del tejido comercial en particular; es decir, a su orientación hacia las necesidades y demandas del turismo, lo cual aleja la regeneración del espacio de sus objetivos iniciales y tiene implicaciones negativas para la población residente. Se utiliza una metodología que combina el análisis espacial y estadístico de variables de concentración, diversidad y cambios de usos comerciales, junto con la revisión documental de planes y proyectos, especialmente, los cofinanciados a través de fondos europeos. Los resultados revelan que estas políticas han contribuido a la gentrificación turística del Centro Histórico de Málaga, a través de una concentración de negocios turísticos que ha desplazado a los negocios tradicionales, así como, indirectamente, a los residentes. Estos hallazgos destacan el papel del turismo en la legitimación de la gestión neoliberal de la ciudad, que persiste a pesar de la crisis de la COVID-19. De hecho, los últimos planes apuntan hacia la intensificación y expansión de esta tendencia hacia otras áreas de la ciudad.
Docta Complutense
Publicación Artículo científico (JournalArticle)

The Return Journey of the Argonauts and Mythical Geography in Apollodorus's Library

  • Acerbo, Stefano
The return voyage of the Argonauts described in the Library presents remarkable differences compared to the model provided by Apollonius of Rhodes. Here we focus specifically on two aspects of the trip in Apollodorus's version, with the aim of providing new insights on these elements of the story that deviate from Apollonius: the order of the stages in the Adriatic Sea and the absence of the Libyan episode. As a result, our analysis allows us to appreciate, beyond the canonical value acquired by Apollonius's text in the early imperial period, the important role played by other local myths, even glimpsing the influence of more ancient traditions about the journey of the Argonauts. Moreover, Apollodorus' authorial choices seem to reveal a general scepticism for the part of the mythographer regarding the possibility of adapting the landscape of the mythological traditions to the geographical knowledge of his time.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Apolodoro e Higino: la mitografía como ejemplo de los conocimientos geográficos compartidos en la παιδεία de época imperial, Apollodorus and Hyginus: Mythography as an Example of Shared Geographical Knowledge in the Imperial παιδεία

  • Acerbo, Stefano
RESUMEN: El examen de las obras de los mitógrafos de la edad imperial puede ofrecer un material útil para valorar la influencia de la geografía científica en la παιδεία griega y romana. El presente artículo se centra, en particular, en la «Biblioteca» de Apolodoro y las «Fábulas» de Higino destacando los puntos de contacto entre ellas, pero, sobre todo, sus diferencias. Algunos pasajes de la «Biblioteca» y, en concreto, la breve reseña doxográfica que abre la sección dedicada a los viajes de Ulises demuestran que Apolodoro conocía algunos aspectos del debate geográfico de su tiempo y no era del todo ajeno a las actitudes científicas y filológicas sobre cuestiones geográficas que se remontan a la época helenística. Por el contrario, Higino no parece manejar la geografía mítica con igual competencia. Su interés principal consiste en acercar la mitología griega al mundo de sus lectores latinos y, por lo tanto, los lugares del mito le interesan sobre todo cuando pueden ser ubicados en Italia o en las regiones cercanas. En estos casos las «Fábulas», aunque a veces pueden preservar detalles raros y valiosos, normalmente se limitan a aludir de manera rápida a los lugares visitados por los héroes, sin ofrecer casi ninguna referencia geográfica.
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Side Effects of Pesticides on the Olive Fruit Fly Parasitoid Psyttalia concolor (Szepligeti): A Review

  • Pinheiro, Lara A.
  • Dáder Alonso, Beatriz|||0000-0002-7328-1961
  • Wanumen Riaño, Andrea Carolina
  • Pereira, José Alberto|||0000-0002-2260-0600
  • Santos, Sonia A.P.|||0000-0003-1500-6360
  • Medina Vélez, María Pilar|||0000-0003-4642-3554
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Comparison of the Parasitization of Chelonus inanitus L. (Hymenoptera: Braconidae) in Two Spodoptera Pests and Evaluation of the Procedure for its Production

  • Magaña Guzmán, Antonio Jesús
  • Dáder Alonso, Beatriz|||0000-0002-7328-1961
  • Sancho, Gonzalo
  • Adán del Río, Ángeles|||0000-0002-4681-1816
  • Morales Marcos, Ignacio
  • Viñuela Sandoval, Elisa|||0000-0002-6283-5236
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Quasiparticle level alignment for photocatalytic interfaces

  • Migani, Annapaola|||0000-0001-5422-805X
  • Mowbray, Duncan J.|||0000-0002-8520-0364
  • Zhao, Jin
  • Petek, Hrvoje
  • Rubio, Ángel|||0000-0003-2060-3151
Electronic level alignment at the interface between an adsorbed molecular layer and a semiconducting substrate determines the activity and efficiency of many photocatalytic materials. Standard density functional theory (DFT)-based methods have proven unable to provide a quantitative description of this level alignment. This requires a proper treatment of the anisotropic screening, necessitating the use of quasiparticle (QP) techniques. However, the computational complexity of QP algorithms has meant a quantitative description of interfacial levels has remained elusive. We provide a systematic study of a prototypical interface, bare and methanol-covered rutile TiO(110) surfaces, to determine the type of many-body theory required to obtain an accurate description of the level alignment. This is accomplished via a direct comparison with metastable impact electron spectroscopy (MIES), ultraviolet photoelectron spectroscopy (UPS), and two-photon photoemission (2PP) spectroscopy. We consider GGA DFT, hybrid DFT, and GW, scQPGW1, scQPGW, and scQPGW QP calculations. Our results demonstrate that GW, or our recently introduced scQPGW1 approach, are required to obtain the correct alignment of both the highest occupied and lowest unoccupied interfacial molecular levels (HOMO/LUMO). These calculations set a new standard in the interpretation of electronic structure probe experiments of complex organic molecule/semiconductor interfaces.
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

mappestRisk: an R package for modelling and mapping risk of crop pest development based on their thermal biology

  • San Segundo Molina, Darío|||0000-0002-7831-9623
  • Barbosa, A. Márcia
  • Pérez Luque, Antonio Jesús
  • Rodríguez Sánchez, Francisco
22 p., Under ongoing global warming and recent crop pest invasions, there is an urgent need to fill the gap between experimental research on pest thermal biology and applied forecasting tools that inform pest-management policies. The R package mappestRisk provides an accessible, open-source workflow that enables researchers, particularly those working in experimental pest biology, to forecast pest risk based on collected data on the thermal response of pest development rates. Built upon recent advances in open-source software development in the R environment, mappestRisk offers an accessible pipeline that spans from fitting performance curves for development rates data to generating broad-scale pest risk maps. Starting with user-provided temperature-dependent life-history dataset, the package fits nonlinear regression models and visualizes their thermal performance curves, with Akaike Information Criterion (AIC) scores and bootstrapped uncertainty ribbons. This allows users to select the most appropriate model based on biological, ecological and statistical criteria. The package then calculates thermal boundaries around the optimal region of the selected curve. These boundaries are used to extract climatic data for a user-defined spatial region or country and to map the number of months per year with optimal temperatures for pest development. The output consists of static or interactive raster maps that provide valuable insights for pest risk based on the known thermal biology of the target pest. This workflow contributes to making pest forecasts open, reproducible and accessible to the scientific community, while also providing relevant information for policy-making institutions and plant-protection organizations involved in crop-pest management., Ministerio de Ciencia, Innovación y Universidades, Universidad de Sevilla, Fondo Europeo de Desarrollo Regional (FEDER), Consejería de Transformación Económica, Industria, Conocimiento y Universidades (Junta de Andalucía)