Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 593
Encontrada(s) 6 página(s)

Docta Complutense
Publicación Contribución de congreso (ConferenceOutput)

An overview of the Maude strategy language and its applications

  • Rubio Cuéllar, Rubén Rafael
In the Maude specification language, the behavior of systems is modeled by nondeterministic rewrite rules, whose free application may not always be desirable. Hence, a strategy language has been introduced to control the application of rules at a high level, without the intricacies of metaprogramming. In this paper, we give an overview of the Maude strategy language, its applications, related verification tools, and extensions, illustrated with examples.
Docta Complutense
Publicación Contribución de congreso (ConferenceOutput)

Abordaje de las úlceras venosas de pacientes incluidos en un ensayo clínico

  • Herraiz Ahijado, Borja Jesús
  • Folguera Álvarez, María Del Carmen
  • Mori Vara, Pilar
  • Rodriguez Vegue, Mónica
  • Lopez Sanchez, Rocio
  • Muñoz Caballero, Eva Rocio
  • Navarro Mallén, Beatriz
  • Hita Urias, María José
  • Peláez Raposo, Belen
Describe el abordaje de las úlceras venosas de pacientes incluidos en ensayo clínico aleatorio, cuyo objetivo es evaluar la efectividad de una intervención educativa estructurada en ejercicio físico como tratamiento coadyuvante del tratamiento habitual, en la cicatrización de las úlceras venosas en atención primaria. Comunicación oral.
Docta Complutense
Publicación Contribución de congreso (ConferenceOutput)

Estilo y mezcolanza en red: el consumo omnívoro en la era de las plataformas

  • Barrio Romera, Carla
  • Gordo López, Ángel Juan
El eclecticismo no es nuevo. Las grandes marcas se nutren desde hace décadas de las mezclas de estilos para sacar nuevas colecciones, especialmente de los elementos que tienden a utilizar los grupos de resistencia. Al adentrarnos en las redes sociales centradas en contenidos (audio)visuales, como por ejemplo Instagram o TikTok, resulta es evidente de las grandes subculturas estéticas prácticamente ya no tienen presencia. Las pijas, punks, hippies, góticas y las raperas, pero también las chonis o incluso las hípsters parecen estar en todos los perfiles y en ninguno; se han desvanecido. Entender este fenómeno requiere considerar la urgencia de la situación actual; en nuestra no podemos ignorar el tiempo que pasamos en redes sociales y el aumento exponencial que el metaverso va a implicar en la presencia digital. La cuestión es que, para profundizar en la huella de que estas plataformas dejan en nuestra vida y su relación con el auge de la mezcolanza, debemos pensar este fenómeno desde una perspectiva que incorpore la impronta de las plataformas en la presentación personal y con ello en la configuración contemporánea del gusto.
Repisalud
Publicación Contribución de congreso (ConferenceOutput)

Cognitive Screening Tools in Spanish for Mild Cognitive Impairment: A Systematic Review and Meta-analysis, Herramientas de cribado cognitivo en español para el deterioro cognitivo leve: una revisión sistemática y metaanálisis

  • Barderas Manchado, Rodrigo
  • Ropero-Sánchez, Andrea
  • Escudero Pérez, Guillermo
  • Lozano González, Pilar
  • Alonso-del-Cura, Olatz
  • Camacho-Montaño, Lucia
  • Pascual García, Marcos
  • Sánchez Ruano, Raquel
  • Martín Saborido, Carlos
  • Moreno-Casbas, Teresa
Mild Cognitive Impairment (MCI) represents the earliest stage of a chronic and degenerative condition, often undetected, impacting individuals, families, and healthcare systems. Early identification is critical. This study evaluates the diagnostic accuracy of MCI screening tools in Spanish-speaking populations, aiming to enhance early detection, reduce misdiagnosis and underdiagnosis, and improve clinical outcomes. This systematic review stems from the Project Dendrite (PMP22/00084 - "Personalized Medicine in the Identification of Preclinical Cognitive Impairment: Development of a Predictive Risk Model") in which it was demonstrated that the five screening tests employed in the study (MMSE, MoCA, Fototest, MiniCog, T@M) lacked consistency and yielded variable results, even in the same participant. This finding highlights the need to evaluate the diagnostic accuracy of the screening tools and their applicability in early cognitive decline detection.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Strategies in Case-Based Argumentation-Based Negotiation: An Application for the Tourism Domain

  • Bouslama, Rihab
  • Amor, Nahla Ben
  • Jordán, Jaume|||0000-0003-0400-9136
  • Heras, Stella|||0000-0001-6212-9377
[EN] Negotiation is a key solution to find an agreement between conflicting parties especially during the purchase journey. This paper treats the negotiations between a travel agency and its customers in the domain of tourism. Both automated negotiation and argumentation are gathered to create a framework for automated agents, presenting a travel agency and its customers, to negotiate a trip and exchange arguments. Agents take advantage of their past experiences and use Case-Based Reasoning to select the best strategy to follow. We represent agents using two types of profiles, Argumentative profile that represents agents¿ ways of reasoning and Preference profile that embodies customers¿ preferences in the domain of tourism.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Análisis del ciclo de vida de la gestión de hidrocarburos residuales, Life cycle assessment of hydrocarbon waste management

  • Pacheco-Blanco, Bélgica|||0000-0002-3955-660X
  • Artacho Ramírez, Miguel Ángel|||0000-0001-8513-6414
  • Cloquell Ballester, Victor Andres|||0000-0002-4698-4434
  • Artorga-Mendoza, F.
[EN] The waste generated by vessels has a great impact on the marine environment. Consequently, a series of laws and conventions related to its management have been established, which tend to avoid constant degradation and minimizing adverse effects. In this sense, the Annex I of MARPOL convention classifies waste generated by ships or cargo residues of crude oil and ballast water contaminated with crude oil. Among these wastes, the hydrocarbons from bilges and tank washing are of special interest due to their danger to the marine environment, their abundance and their ease of recovery. The aim of this work is to analyze the current environmental impact of hydrocarbon management in a seaport. For this purpose, the Life Cycle Assessment methodology is used. The conclusions obtained help us to propose some improvements for recovery and management of hydrocarbons., [ES] Los residuos generados por las embarcaciones provocan un gran impacto en el medio marino. Por consiguiente, se han establecido una serie de leyes y convenios relacionados con su gestión, que tienden a evitar la constante degradación y minimizar los efectos adversos. En este sentido, el convenio MARPOL clasifica en el anexo I, los desechos generados por buques o residuos de carga de petróleo crudo y agua de lastre contaminada con petróleo crudo. Entre estos desechos, los hidrocarburos provenientes de las sentinas y el lavado de tanques tienen especial interés por su peligrosidad para el medio marino, su abundancia y por su facilidad de recuperación. El objetivo de este trabajo es conocer el impacto ambiental actual de la gestión de hidrocarburos en un puerto marítimo. Con este fin, se utiliza la metodología de Análisis del Ciclo de Vida. Las conclusiones obtenidas, permiten proponer futuros escenarios de recuperación y gestión de hidrocarburos., El trabajo se ha realizado en el marco del proyecto IDENTIFICACIÓN Y ANÁLISIS AMBIENTAL Y ECONÓMICO DE LAS ACTIVIDADES DE MAYOR POTENCIAL DE SIMBIOSIS ENTRE LAS EMPRESAS QUE COMPONEN VALENCIAPORT subvencionado por la Generalitat Valenciana para la realización de proyectos I+D+i desarrollados por grupos de investigación emergentes (GV), con referencia GVA/2020/217.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Particle size analysis of mixed sediments in oscillating flows with mobile beds

  • Abreu, Tiago
  • Ferreira, Caroline C.
  • Matos, João
  • Bernabeu, Ana M.
  • Silva, Paulo A.
[EN] The dynamics of beaches encompass complex mechanisms in sediment transport, which are contingent on the heterogeneous nature of sands. Understanding these mechanisms is crucial for morphodynamic modeling. This study conducted a thorough analysis of the vertical granulometric distribution of sediments on the bed, relying on laboratory experiments carried out in a wave flume and employing a laser particle counter. The bed was covered with sand mixtures obtained from two well-sorted grain-size fractions: a fine sediment (F) with a median diameter of 0.21 mm and a coarse sediment (C) with a median diameter of 0.58 mm. As observed in the experiments analyzed in this study, the initially homogeneous bed composition undergoes changes, illustrating a trend toward coarsening in the majority of the layers.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

From Simultaneous to Streaming Machine Translation by Leveraging Streaming History

  • Iranzo-Sánchez, Javier
  • Civera Saiz, Jorge|||0000-0002-0963-0143
  • Juan, Alfons|||0000-0002-9984-4072
[EN] Simultaneous Machine Translation is the task of incrementally translating an input sentence before it is fully available. Currently, simultaneous translation is carried out by translating each sentence independently of the previously translated text. More generally, Streaming MT can be understood as an extension of Simultaneous MT to the incremental translation of a continuous input text stream. In this work, a state-of-the-art simultaneous sentencelevel MT system is extended to the streaming setup by leveraging the streaming history. Extensive empirical results are reported on IWSLT Translation Tasks, showing that leveraging the streaming history leads to significant quality gains. In particular, the proposed system proves to compare favorably to the best performing systems., The research leading to these results has received funding from the European Union¿s Horizon 2020 research and innovation programme under grant agreements no. 761758 (X5Gon) and 952215 (TAILOR), and Erasmus+ Education programme under grant agreement no. 20-226-093604-SCH (EXPERT); the Government of Spain¿s grant RTI2018-094879-B-I00 (Multisub) funded by MCIN/AEI/10.13039/501100011033 & ¿ERDF A way of making Europe¿, and FPU scholarships FPU18/04135; and the Generalitat Valenciana¿s research project Classroom Activity Recognition (ref. PROMETEO/2019/111). The authors gratefully acknowledge the computer resources at Artemisa, funded by the European Union ERDF and Comunitat Valenciana as well as the technical support provided by the Instituto de Física Corpuscular, IFIC (CSIC-UV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Introducing a novel experimental setup for assessing the progressive collapse resistance of structures

  • Setiawan, Andri
  • Cetina-Berdugo, Diego Fernando
  • Gerbaudo, Maria Luz
  • Marin, Lorenzo|||0000-0002-7117-1291
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Adam, Jose M|||0000-0002-9205-8458
[EN] The paper describes the development process of a novel experimental setup to assess the ability of a structural system to arrest collapse propagation. Unlike traditional pushdown tests, the proposed setup allows more realistic interactions of different failure modes during a collapse process. The adopted boundary conditions and loading protocol were designed and calibrated using advanced computational simulations representing full-building (global) responses. Then, a particular portion of the building (subassembly) was extracted, scaled down, and constructed in our laboratory. It is expected that the new setup will help to reveal new and insightful information about the progressive collapse phenomenon., This article is part of a project (Endure) that has received funding from the European Research Council (ERC) under the European Union s Horizon 2020 research and innovation programme (Grant agreement No. 101000396). The authors would also like to express their gratitude for funding received under the postdoctoral programs of the Generalitat Valenciana/Fons Social Europeu [CIAPOS/2023/216] and for the Evolve project (ref. CIGE/2023/199).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A Deep Embedded Framework for Spitzoid Neoplasm Classification Using DNA Methylation Data

  • del Amor, Rocío
  • Colomer, Adrián|||0000-0002-7616-6029
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
  • Monteagudo, Carlos
  • Garzón, María José
  • García-Giménez, José Luis
[EN] Spitzoid melanocytic tumors (SMT) are a group of neoplasms that represent a formidable diagnostic challenge for dermatopathologists. DNA methylation (DNAm) is a welldefined epigenetic factor that has an important role in the development of these lesions. In this work, we propose different deep-learning-based approaches to address the Spitzoid neoplasms detection from DNAm. We use an autoencoder and a variational autoencoder for dimensionality reduction with a subsequently supervised classification. Additionally, we present a deep embedded refined clustering algorithm able to optimize the latent space at the same time that the non-supervised classification task is performed. This novel approach in DNAm supposes a step forward in the SMT detection as suggest the obtained results (acc = 0.9). Additionally, making use of the resulting model, we present a subspace-prototypical-based approach for the prognostic prediction of uncertain malignant potential samples, which is nowadays the hottest open area in SMT detection., This work has received funding from Horizon 2020, the European Union¿s Framework Programme for Research and Innovation, under grant agreement No. 860627 (CLARIFY), the Spanish Ministry of Economy and Competitiveness through project PID2019-105142RB-C21 (AI4SKIN) and SICAP (DPI2016-77869-C2-1-R) and GVA through project PROMETEO/2019/109
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Comparative results of peer assessment Vs evaluation supported in rubricas both in undergraduate and master&apos, s degree studies

  • Montanes, Nestor|||0000-0001-6070-127X
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Fombuena, Vicent|||0000-0001-7266-6205
  • Fenollar, Octavio|||0000-0003-4323-7414
[EN] The process to evaluate students is always a committed task. Evaluation can be a way of regulating the student lessons and also a tool to help them to improve. In order to achieve our goal, teaching, learning and evaluation should be aligned, which requires clear criteria and indicators. The use of rubrics as an evaluation tool allows the establishment of impartial and clear indicators. In addition, the rubrics promote formative evaluation, which is very interesting to treat evaluation as one more formative activity. In the described framework of a learning-oriented evaluation, peer assessment, is to be evaluated by one's own peers. The process encourages active learning in the students and become the protagonists of their own learning process. With the aim of achieving this formative evaluation, the authors have established peer-to-peer assessment in certain subjects of the different Degrees in Engineering, as well as in the Master's Degree in Engineering, Processing and Characterization of Materials, both taught at the Universitat Politècnica de València (UPV). Specifically, rubrics have been developed to evaluate the oral presentations that students make of their projects, and the same rubric is used both by students for peer evaluation and by the lecturer. The aim of this work is to show the results registered after several years of application of the described evaluative methodology and to compare them in order to obtain conclusions which validate their application in the different formative levels in the field of the universities., This work is the result of the effort being made by the Grupo de Innovación de Prácticas Académicas (GIPA) of the UPV in favor of teacher improvement. The authors want to show their gratitude to the UPV and the Instituto de Ciencias de la Educación (ICE) of the UPV for their help and collaboration in the formation of the Equipo de Innovación y Calidad Educativa (EICE) called GIPA. This work is supported by the Vicerrectorado de Estudios, Calidad y Acreditación of the Universitat Politècnica de València under PIME program (Ref: B18/18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Atrial Fibrillation Surgical Ablation Long-term Outcome Prediction Just with One Lead of the Preoperative Surface Electrocardiogram

  • García, Manuel
  • Escribano, Pilar
  • Ródenas, Juan
  • Martínez-Iniesta, Miguel
  • Hornero, Fernando
  • Alcaraz, Raúl
  • Rieta, J J|||0000-0002-3364-6380
[EN] To revert atrial fibrillation (AF) in patients requiring concomitant open-heart surgery, surgical ablation (SA) is one of the most effective procedures. However, this intervention is as- sociated with major side effects. Considering this limitation together with the benefits of anticipating antiarrhythmic treatment decisions, preoperative prediction of long-term outcome of SA is an interesting challenge. In the present work a novel algorithm to anticipate SA outcome after a follow-up of 12 months is introduced by just analyzing one lead from a preoperative electrocardiogram (ECG). Precisely, fibrillatory waves reflected on lead V1 are extracted using a QRST cancellation method. The obtained signal is divided into 1 s-length segments, which are decomposed into 8 time scales by making use a Wavelet transform. Finally, relative wavelet energy for each segment and scale is computed and the standard deviation of the time series for the 7th scale is obtained as a measure of organization of the fibrillatory waves. This index obtained statistically significant differences between the patients who maintained sinus rhythm and relapsed to AF during the follow-up. Moreover, it also yielded a discriminant ability about 75%, thus improving between 13 and 29% the one showed by other well-established parameters., This research has been supported by grants DPI2017-83952- C3 from MINECO/AEI/FEDER EU, SBPLY/17/ 180501/000411 from Junta de Comunidades de Castilla-la Mancha, and AICO/2019/036 from Generalitat Valenciana. Moreover, Pilar Escribano holds a graduate research scholarship from University of Castilla-La Mancha.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Exploring Visual Cues for Intuitive Communicability of Touch Gestures to Pre-kindergarten Children

  • Nácher Soler, Vicente Ernesto
  • Catalá Bolós, Alejandro
  • Jaén Martínez, Francisco Javier|||0000-0002-8815-9643
Pre-kindergarten children are becoming frequent users of multi-touch technology and, according to previous studies they are able to perform several multi-touch gestures successfully. However, they do not use these devices supervised at all times. Consequently, interactive applications for pre-kindergarteners need to convey their underlying design intent and interactive principles with respect to touch interaction. In this paper, we present and evaluate two approaches to communicate three different touch gestures (tap, drag and scale up) to pre-kindergarten users. Our results show, firstly, that it is possible to effectively communicate them using visual cues and, secondly, that an animated semiotic approach is better than an iconic one., Work supported by the MINECO (grant TIN2010-20488) and GVA VALi+d program (grant APOSTD/2013/013).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Evaluación de la edad de razonamiento de LLMs en las Pruebas Cangur de la Comunitat Valenciana

  • Igualde-Sáez, Arnau|||0009-0009-0824-6957
  • Rhomrassi-Amhar, Lamyae
  • Hoyas, Sergio|||0000-0002-8458-7288
  • García Sabater, José Pedro|||0000-0002-9097-2852
  • Fullana Alfonso, Màrius Josep|||0000-0002-0196-7876
  • Conejero, J. Alberto|||0000-0003-3681-7533
  • Ahsini, Y.
  • Vinuesa, R.
[CA] Aquest estudi analitza l'eficàcia dels models de llenguatge profund (LLMs) de IA per a resoldre problemes de matemàtiques mitjançant una avaluació d'una bateria de preguntes en valencià, avaluant tant la precisió com la coherència dels raonaments generats. Per a això, s'ha generat un dataset amb els enunciats extrets per OCR de les edicions 2014/2024 de les Proves Cangur, normalitzat en CSV i avaluat mitjançant prompts sistemàtics idèntics per a tots els models. DeepSeek, GPT-4o i LLaMA 3.3-70B lideren la taxa d'encert, aconseguint un rendiment superior al 90% en preguntes de purament textuals sense igualar completament la precisió humana, la qual cosa subratlla àrees clau per a la innovació pedagògica i futurs desenvolupaments en entrenament multilingüe i adaptatiu., [ES] Este estudio analiza la eficacia de los modelos de lenguaje profundo (LLMs) de IA para resolver problemas de matemáticas mediante una evaluación de una batería de preguntas en valenciano, evaluando tanto la precisión como la coherencia de los razonamientos generados. Para ello, se ha generado un dataset con los enunciados extraídos por OCR de las ediciones 2014/2024 de las Pruebas Cangur, normalizado en CSV y evaluado mediante prompts sistemáticos idénticos para todos los modelos. DeepSeek, GPT-4o y LLaMA 3.3-70B lideran la tasa de acierto, alcanzando un rendimiento superior al 90 % en preguntas de puramente textuales sin igualar completamente la precisión humana, lo que subraya áreas clave para la innovación pedagógica y futuros desarrollos en entrenamiento multilingüe y adaptativo.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Estudio integral de la metodología aprendizaje basado en problemas para la adquisición de competencias transversales con técnica de trabajo en equipo y evaluación individualizada

  • Ye Lin, Yiyao|||0000-0003-2929-181X
  • Prats-Boluda, Gema|||0000-0002-9362-5055
  • Bosch Roig, Ignacio|||0000-0003-3190-3635
  • Martínez-de-Juan, José L.|||0000-0001-9133-3123
[ES] El trabajo en grupo es una de las metodologías docentes más comunes para la adquisición de competencias específicas y transversales. La metodología de aprendizaje basado en problemas (ABP) se implantó para el desarrollo grupal de competencias en los estudiantes del Grado en Ingeniería Biomédica. No obstante, se detectó una excesiva carga de trabajo no presencial para los alumnos (71±35 h). Asimismo, la evaluación del trabajo grupal no reflejaba fielmente el aprendizaje individual de cada estudiante. En este trabajo se realiza un estudio integral de la implantación de la metodología ABP con especial énfasis en la evaluación del aprendizaje individual en las actividades grupales. El análisis de la dedicación no presencial del alumnado (26±15 h por 1.8 ECTS) y del profesorado (~14.3 h/ECTS) muestra que la metodología propuesta es altamente sostenible y aunque supuso una reducción significativa en el tiempo de dedicación, no afectó a la percepción del alumnado sobre la adquisición de competencias. Además, los alumnos consideran que la metodología ABP permite mejorar significativamente el nivel de dominio del manejo de Matlab. En cuanto al sistema de evaluación que valora el aprendizaje individual del manejo de Matlab se ha encontrado cierta resistencia al cambio del método de evaluación por parte del alumnado., Este trabajo está subvencionado parcialmente por la ETSII UPV y el Vicerrectorado de Estudios, Calidad y Acreditación de la UPV (PIME B03, Convocatoria 2017-2018).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Implementation of activities for the evaluation of the specific instrumental transversal competence in subjects in the area of mechanical engineering

  • Pedrosa, Ana M.|||0000-0001-8069-5620
  • Sánchez-Orgaz, Eva María|||0000-0002-8864-3056
  • Lozano-Mínguez, Estívaliz|||0000-0003-4576-826X
  • Martinez-Sanchis, Sandra|||0000-0002-3223-0623
[EN] Most of the higher education frameworks work and evaluate transversal competences, to achieve the excellence of graduates, not only academically but also integrating social aspects, ethics, communication, teamwork, etc. To this end, the present work studies a common methodology both in the activities, to improve the acquisition of the ¿Specific Instrumental¿ transversal competence, as well as in its evaluation. In the practical sessions, the student uses a detailed tutorial with the procedure to obtain the numerical result. The evaluation of the ¿Specific Instrumental¿ transversal competence is deficient following this structure, since it does not show whether the student acquires autonomy to solve similar problems. Therefore, an unguided alternative activity was proposed at the end of each session, which allows to see the evolution of the student in the face of a different problem without guidelines. Experience shows that it is rash to expect the student to handle the program autonomously in the first session. For this reason, the delivery deadline for tasks will be extended by a few weeks. Obviously, guarantee of authenticity is lost, but responsibility for learning is transferred to the student. Allowing the student to spend the time necessary for deep learning, without the pressure of ending the session., Authors gratefully acknowledge the financial support of the Vicerrectorado de Estudios, Calidad y Acreditación and the Vicerrectorado de Recursos Digitales y Documentación of the Universitat Politècnica de València (project PIME B/19-20/165) and the Instituto de Ciencias de la Educación of the Universitat Politècnica de València (EICE INTEGRAL).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Comparación de los umbrales de fractura biomecánica de los tejidos de la cabeza humana mediante un modelo de elementos finitos

  • Lozano-Mínguez, Estívaliz|||0000-0003-4576-826X
  • Rupérez Moreno, María José|||0000-0001-8457-7963
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
  • Palomar-Toledano, Marta
[ES] Anualmente se producen un gran número de muertes y discapacidades permanentes a consecuencia de traumatismos craneoencefálicos. Al no poderse realizar ensayos in vivo para conocer los mecanismos de desarrollo de estas lesiones, las simulaciones numéricas son una herramienta clave en el estudio de éstas. La precisión de los modelos numéricos depende en gran medida de la correcta definición de las ecuaciones constitutivas y de los modelos de daño. Sin embargo, en la literatura se encuentra gran dispersión en los modelos empleados, así como en los valores de las propiedades biomecánicas. Por tanto, el objetivo principal de esta investigación era realizar una revisión y comparación de los modelos y las propiedades empleadas en la literatura, mediante un nuevo modelo de elementos finitos (EF) calibrado con ensayos experimentales de cadáveres, para discernir aquellos que proporcionan una respuesta más cercana a los resultados empíricos. Los valores umbral del cráneo y del cuero cabelludo que conducen a la fractura han sido estudiados y seleccionados. Se ha observado que el hueso compacto es crítico en la fractura del cráneo pero que no es el único parámetro que influye en ésta., Los autores agradecen el apoyo financiero recibido del Ministerio de Economía y Competitividad y los Fondos FEDER a través del proyecto RTC-2015-3887-8. También se reconoce el apoyo de la Generalitat Valenciana a través del programa PROMETEO 2016/007
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Online poster presentation vs. Onsite. An experience in the pandemic context at undergraduate level

  • Heredia Gutiérrez, Ana Belén|||0000-0001-6629-9779
  • Seguí Gil, Lucía|||0000-0002-2711-9445
  • Barrera Puigdollers, Cristina|||0000-0003-4408-3541
  • Castelló Gómez, María Luisa|||0000-0002-4889-1792
  • García Hernández, Jorge|||0000-0003-1258-6128
[EN] At present, the whole world is facing the COVID-19 pandemic and its impact on heath, economics, society, as well as on all education levels. The pandemic has driven an unexpected change from onsite delivery to courses fully or partially delivered online. As a consequence, development and evaluation of the competences defined for each degree will also be affected by these changes, for which activities and methodologies will need to be re-defined and evaluation processes adapted. Oral poster presentation is a learning experience through which students are invited to acquire both specific and transversal competences which are important in a scientific career. To this aim, oral poster presentation has been part of a ¿scientific congress simulation¿ experience in which students of 4th year of Degree in Biotechnology are involved yearly as part of the course ¿Bioprocess and bioproducts¿ (Escuela Técnica Superior de Ingeniería Agronómica y del Medio Natural, Universitat Politècnica de València). Previous years results have confirmed that through this experience students develop specific and transversal competences related to the biotechnologist research profile such as data basis searching, synthesis of information, results interpretation, deadline accomplishment and time management, as well as oral communicative skills. Due to the current situation, an online version of this activity has been piloted during the academic year 2020-21 with the aid of Microsoft Teams. Presential follow-up by teachers has been replaced by regular face-to-face virtual meetings with each student team. Microsoft Teams has also been used as a platform where uploading students¿ deliverables (index of contents, abstract including the entailment of the topic with the sustainable development goals, poster and screencast files). Each student team was asked to record a 5-min screencast to be visualized in a synchronic virtual poster session in front of a panel of experts of three different areas: Food biotechnology, Environmental biotechnology, and Biomedicine. Not only poster presentation, but also interaction with the experts after screencast visualization were considered for the assessment. For the latter, rubrics were specifically developed and shared with the panel of experts. This contribution aims to present the main results of this experience by analyzing the advantages and disadvantages of moving this activity from onsite to online, considering both students and teachers perceptions regarding development of the activity, quality of the results, as well as impact on assessment and competence development., The authors also thank UPV for financial support through the project PIME/20-21/208 "Aprendizaje Basado en Retos: una contribución a la adquisición significativa de competencias profesionales (transversales y específicas) del ámbito agroalimentario y biotecnológico".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Parallelization of an algorithm for automatic classification of medical data

  • García Mollá, Víctor Manuel|||0000-0003-4768-7367
  • Salazar Afanador, Addisson|||0000-0001-5849-5104
  • Vidal Maciá, Antonio Manuel
  • Vergara Domínguez, Luís|||0000-0001-6803-4774
  • Safont Armero, Gonzalo
In this paper, we present the optimization and parallelization of a state-of-the-art algorithm for automatic classification, in order to perform real-time classification of clinical data. The parallelization has been carried out so that the algorithm can be used in real time in standard computers, or in high performance computing servers. The fastest versions have been obtained carrying out most of the computations in Graphics Processing Units (GPUs). The algorithms obtained have been tested in a case of automatic classification of electroencephalographic signals from patients., This work was supported by Spanish Administration (Ministerio de Economía y Competitividad) and European Union (FEDER) under grants TEC2014-58438-R and TEC2017-84743-P; and Generalitat Valenciana under grants PROMETEO II/2014/032 and PROMETEO II/2014/003.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Physical and Social Vulnerability to Heat Waves in Rural Communities with Vernacular Architecture: Villages in the Montesinho Natural Park (Portugal) as a Case Study

  • Graus, Sandra
  • Ferreira, Tiago
  • Vasconcelos, Graca
  • Ortega, Javier
[EN] Vernacular architecture in depopulating rural areas faces critical challenges due to climate change, particularly with the rise in extreme events like heat waves. These events threaten the conservation of buildings and the well-being of their inhabitants, especially in regions undergoing demographic decline and an aging population. The sustainability of these structures, built with traditional materials and techniques, raises important questions about their ability to withstand current and future conditions especially in dry and warm climates. This study explores the combined physical and social vulnerability of vernacular buildings exposed to heat waves, focusing on how architectural and sociodemographic factors influence the resilience of these structures and their inhabitants. Using a vulnerability index-based methodology and an on-site data collection, vulnerability levels across a variety of vernacular buildings and vulnerable households have been identified. The results emphasize how passive design features can help to mitigate the effects of extreme heat. At the same time, social factors worsen vulnerability, particularly for aging and low-income populations—common characteristics of many depopulating rural areas. This research underscores the importance of protecting the cultural and functional value of vernacular architecture, positioning it not only as a component of rural identity but also as a critical resource for climate adaptation., This work was partly funded by FCT/MCTES through national funds (PIDDAC) under the R&D Unit Institute for Sustainability and Innovation in Structural Engineering (ISISE), reference UID/04029. It was also supported by the Associate Laboratory Advanced Production and Intelligent Systems (ARISE), reference LA/P/0112/2020. Additional support was provided by the R&D project “Sustainability-led approaches for the rehabilitation and revitalization of the cultural built heritage of Montesinho Natural reference Park” (INHAVIT), MTS/BRB/0086/2020 (https://doi.org/10.54499/MTS/BRB/0086/2020) , and by a PhD grant from Fundação para a Ciência e a Tecnologia (FCT), reference BD/01407/2024.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

An SMT-Based Concolic Testing Tool for Logic Programs

  • Fortz, Sophie
  • Mesnard, Fred
  • Payet, Etienne
  • Perrouin, Gilles
  • Vanhoof, Wim
  • Vidal, Germán|||0000-0002-1857-6951
[EN] Concolic testing combines symbolic and concrete execution to generate test cases that achieve a good program coverage. Its benefits have been demonstrated for more than 15 years in the case of imperative programs. In this work, we present a concolic-based test generation tool for logic programs which exploits SMT-solving for constraint resolution, Third author is a research associate at FNRS that also supports this work (O05518FRG03). The last author is partially supported by the EU (FEDER) and the Spanish MCI/AEI under grants TIN2016-76843-C4-1-R/PID2019-104735RB-C41 and by the Generalitat Valenciana under grant Prometeo/2019/098 (DeepTrust)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Comportamiento del Método LSQR en la Reconstrucción Tomográfica para un Número Limitado de Proyecciones con Ruido Gausiano

  • Flores, Liubov Alexandrovna
  • Sánchez, María Guadalupe
  • PARCERO IGLESIAS, ESTIBALIZ|||0000-0002-5155-2900
  • Vidal-Gimeno, Vicente-Emilio|||0000-0002-2384-7015
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
Los métodos iterativos de reconstrucción de imágenes en la Tomografía Axial Computarizada (TAC) han llegado a ser un área de investigación muy activo por su capacidad de resolver el problema de reconstrucción con un número limitado de proyecciones. Esto posibilita la reducción de la dosis de radiación en los pacientes durante el examen TAC. Sin embargo, la complejidad de datos en TAC eleva el coste computacional de la reconstrucción, especialmente en 3D. Disminuir el tiempo computacional en la reconstrucción de la imagen y la dosis de radiación constituyen dos grandes problemas en la tomografía computarizada. Además, también es interesante analizar el comportamiento del método cuando se añade ruido gaussiano a las proyecciones. Para resolver este problema de forma eficiente se ha adaptado el método Sparse Equations and Least Squares (LSQR) con el filtro Soft Threshold Filtering (STF) para eliminar ruido gaussiano y el algoritmo denominado Fast Iterative Shrinkage-Thresholding Algorithm (FISTA) para la reconstrucción de imágenes TAC con un menor número de proyecciones con ruido. La eficiencia del método propuesto se demuestra analizando el fantoma FORBILD., Este trabajo ha sido soportado por la Universitat Politècnica de València y financiado parcialmente por ANITRAN PROMETEOII/2014/008 de la Generalitat Valenciana de España.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Probabilistic analysis of a cantilever beam with load modelled via Brownian motion

  • Cortés, J.-C.|||0000-0002-6528-2155
  • López-Navarro, Elena|||0000-0003-0164-9007
  • Real Herráiz, Julia Irene
  • Romero, José-Vicente|||0000-0003-3366-6557
  • Roselló, María-Dolores|||0000-0002-5724-7683
This work has been supported by the grant PID2020-115270GB-I00 funded by MCIN/AEI/10.13039/501100011033 and the grant AICO/2021/302 (Generalitat Valenciana).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Assessment of critical thinking within a subject related to mechanical engineering

  • Giner Navarro, Juan|||0000-0002-0513-3625
  • Sonseca Olalla, Agueda|||0000-0002-2776-4399
  • Martínez Casas, José|||0000-0001-5706-4951
  • Carballeira, Javier|||0000-0002-4179-8499
[EN] The international accreditation of the programmes for the masters' and bachelors' degrees offered at our university, together with the demands of the employers, have made it clear that the students' curricula should specify not only what they have studied, but also what they are actually able to do. Although, in the recent years the competence based curricula approach has been used in the development of the new masters' and bachelors¿ degree programmes within the European Higher Education Area, the assessment of the generic competences is still a pending matter. This work presents an outcomes approach for the assessment of the capacity for critical thinking within subjects related to mechanical engineering. In particular, this paper proposes a methodology in order to quantify the level of achievement and shows one tool developed for that purpose. The tool is based on the evaluation of some learning outcomes that can be observed by asking the students about different issues related to the contents of the course. Conclusions about preliminary results and the difficulties found to create this tool are also described here., The authors acknowledge the financial contribution by the Universitat Politècnica de València through the project PIME/2018/DPTO. IMM.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Multi-Display Environments to Foster Emotional Intelligence in Hospitalized Children

  • García Sanjuan, Fernando
  • Catalá Bolós, Alejandro
  • Jaén Martínez, Francisco Javier|||0000-0002-8815-9643
Long-term and frequent hospitalized children are under high loads of emotional stress, which affects their well-being in addition to the illness they are suffering. This thesis proposes and will focus on an approach to use Multi-Display Environments (MDE) in pediatric hospitalization contexts to improve patients’ emotional intelligence so they can deal with the negative emotions produced by their situation., This work is supported by Spanish MINECO (TIN2010-20488 and TIN2014-60077-R), from Universitat Politècnica de València (UPV-FE-2014-24), and from GVA (APOSTD/2013/013 and ACIF/2014/214).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Enhancing Precision Medicine: An Automatic Pipeline Approach for Exploring Genetic Variant-Disease Literature

  • Contreras-Ochando, Lidia
  • Pla Santamaría, Ferran
  • Segarra Soriano, Encarnación
  • Marco-García, Pere|||0009-0003-7026-3543
  • León-Palacio, Ana|||0000-0003-3516-8893
  • Hurtado Oliver, Lluis Felip|||0000-0002-1877-0455
[EN] Advancements in genomics have generated vast amounts of data, requiring efficient methods for exploring the relationships between genetic variants and diseases. This paper presents a pipeline approach that automatically integrates diverse biomedical databases, including NCBI Gene, MeSH, LitVar2, PubTator, and SynVar, for retrieving comprehensive information about genes, variants, diseases, and associated literature. The pipeline consists of multiple stages: querying and searching across the different databases, extracting relevant data, and applying filters to refine the results. Its goal is to bridge the gap in information retrieval related to genetic variants and diseases by providing a systematic framework for discovering relevant literature. The pipeline uses open-access sources to uncover additional articles not referenced in expert reports that mention the genetic variants of interest. In this paper, we present the methodology of the pipeline, discuss its limitations and highlight its potential for advancing information systems, data management, and interoperability in the domains of genomics and precision medicine., This work is partially supported by MCIN/AEI/10.13039/501100011033, by the 'European Union' and 'NextGenerationEU/MRR', and by 'ERDF A way of making Europe' under grants PDC2021-120846-C44 and PID2021-126061OB-C41. It is also partially supported by the Generalitat Valenciana underproject CIPROM/2021/023. We would like to thank the authors of LitVar2 for their valuable assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Cache-Poll: Containing Pollution in Non-Inclusive Caches Through Cache Partitioning

  • Pons-Escat, Lucía|||0000-0002-4582-7744
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Pons Terol, Julio|||0000-0002-5654-6753
[EN] Current server processors have redistributed the cache hierarchy space over previous generations. The private L2 cache has been made larger and the shared last level caches (LLC) smaller but designed as non-inclusive to reduce the number of replicated blocks. As a result, the new organization shrinks the per-core cache area. Cache management in this organization becomes more critical than in inclusive caches due to two main reasons: there is less storage capacity per core both in the L3 and when considering the sum of L2 and L3 cache sizes, and there is higher L2-L3 traffic especially when running high cache-demanding applications. This paper focuses on minimizing L3 cache pollution to make a more efficient use of the limited space. Three main types of pollution are identified and measured: useless prefetches, bad speculated loads, and poor locality. This paper proposes Cache-Poll, a pollution-aware management policy that concentrates on limiting the cache space to polluting and L3 insensitive applications, allowing critical applications occupy more space. Unlike state-of-the-art work on non-inclusive caches, Cache-Poll is able to improve performance in an Intel Xeon Scalable processor even when running heavy cache-demanding workloads, consisting of 12-application workloads, as many applications as cores in the processor. Results show that Cache-Poll improves fairness and turnaround time by 44% and 24%, respectively, over the Linux OS, while even improving performance up to 3.5%., This work has been supported by the Spanish Ministerio de Universidades under the grant FPU18/01948 and by Spanish Ministerio de Universidades and European ERDF under grant RTI2018-098156-BC51.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Influence of Gradient and Smoothness of Atrial Wall Thickness on Initiation and Maintenance of Atrial Fibrillation

  • Azzolin, Luca
  • Luongo, Giorgio
  • Rocher-Ventura, Sara
  • Dossel, Olaf
  • Loewe, Axel
  • Saiz Rodríguez, Francisco Javier|||0000-0002-9850-0825
[EN] This work uses a highly detailed computational model of human atria to investigate the effect of spatial gradient and smoothing of atrial wall thickness on inducibility and maintenance of atrial fibrillation (AF) episodes. An atrial model with homogeneous thickness (HO) was used as baseline for the generation of different atrial models including either a low (LG) or high thickness gradient between left/right atrial free wall and the other regions. Since the model with high spatial gradient presented non-natural sharp edges between regions, either 1 (HG1) or 2 (HG2) Laplacian smoothing iterations were applied. Arrhythmic episodes were initiated using a rapid pacing protocol and long-living rotors were detected and tracked over time. Thresholds optimised with receiver operating characteristic analysis were used to define high gradient/curvature regions. Greater spatial gradients increased the atrial model inducibility and unveiled additional regions vulnerable to maintain AF drivers. In the models with heterogeneous wall thickness (LG, HG2 and HG1), 73.5 ± 8.7% of the long living rotors were found in areas within 1.5 mm from nodes with high thickness gradient, and 85.0 ± 3.4% in areas around high endocardial curvature. These findings promote wall thickness gradient and endocardial curvature as measures of AF vulnerability, Research supported by the European Union's Horizon 2020 research and innovation programme under the Marie Sk¿odowska-Curie grant agreement No.766082 (MY-ATRIA project)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Study on the Stability of CFAEs to Characterize the Atrial Substrate in Atrial Fibrillation

  • Finotti, Emanuela
  • Ciaccio, Edward J.
  • Garan, Hasan
  • Hornero, Fernando
  • Alcaraz, Raul
  • Rieta, J J|||0000-0002-3364-6380
[EN] A variety of indexes has been applied to complex fractionated atrial electrograms (CFAEs) of atrial fibrillation (AF) aimed at characterizing the atrial substrate. However, often the reported results miss the assessment of intra-recording and intra-patient stability of the analyzed data, as well as CFAEs signal quality. This work introduces a study in which Determinism (DET) of Recurrence Quantification Analysis (RQA) and Sample Entropy (SE) have been applied to assess intra-recording and intrapatient stability of 1, 2 and 4 s-length segments CFAEs recorded from patients with paroxysmal and persistent AF using the coefficient of variation (CV). Furthermore, the analyses verified changes introduced by discarding artifacted and noisy CFAE segments. The intra-recording analysis pointed out that discarding segments provoked a significant variation of CV(%) in any segment length both for DET and SE, with deeper decreases for longer segments. Intra-patient stability provided large variations in CV(%) for DET and even bigger for SE at any segment length. In this case discarding segments was useless and CV provided limited variations. Kruskal-Wallis test revealed significant differences in DET and SE values among channels, independently from the discarding process., Research supported by grants DPI2017-83952-C3 from MINECO/AEI/FEDER UE, SBPLY/17/180501/000411 from JCCLM and AICO/2019/036 from GVA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

From Disassembly to Re-Assembly An Innovative Pedagogical Approach to Architectural Design and Upcycling Practices

  • Gasparotto, Jacopo
  • Ramirez G., Frank
  • Fasano, Carlotta
[EN] In the context of new curricula methodologies, experiential learning and theoretical skills are being blended to tackle real case scenarios. As a result, methodologies such as the research-by-design approach are gaining momentum for their student-centred and dialogic approaches, highlighting a required change of perspective both on the teaching and learning spheres. In this regard, the following paper discusses the potential of this approach in the architectural technology teaching practices dealing with new challenges such as upcycling, where the canonical schemes may not be applicable. Therefore, the research-by-design approach has been tested as the working method in the "UP+IT – How to Disassemble a Building?" workshop, in which professors, researchers and PhD students from four Italian universities worked together to study and propose upcycling strategies for a real case scenario., We thank the research group of the "Upcycling Architecture in Italy. Forging and Promoting a Renewed Building Culture" project, for their invitation to participate in the "UP+IT – How to Disassemble a Building?" workshop. This publication is part of the project PNRR-NGEU which has received funding from the MUR – DM 118/2023.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Dispersion Entropy: A Measure of Electrohysterographic Complexity for Preterm Labor Discrimination

  • Nieto del-Amor, Félix|||0000-0003-0050-9360
  • Ye Lin, Yiyao|||0000-0003-2929-181X
  • Garcia-Casado, Javier|||0000-0003-1410-2721
  • Prats-Boluda, Gema|||0000-0002-9362-5055
  • Díaz-Martínez, María del Alba
  • González Martínez, María
  • Monfort-Ortiz, R.
[EN] Although preterm labor is a major cause of neonatal death and often leaves health sequels in the survivors, there are no accurate and reliable clinical tools for preterm labor prediction. The Electrohysterogram (EHG) has arisen as a promising alternative that provides relevant information on uterine activity that could be useful in predicting preterm labor. In this work, we optimized and assessed the performance of the Dispersion Entropy (DispEn) metric and compared it to conventional Sample Entropy (SampEn) in EHG recordings to discriminate term from preterm deliveries. For this, we used the two public databases TPEHG and TPEHGT DS of EHG recordings collected from women during regular checkups. The 10th, 50th and 90th percentiles of entropy metrics were computed on whole (WBW) and fast wave high (FWH) EHG bandwidths, sweeping the DispEn and SampEn internal parameters to optimize term/preterm discrimination. The results revealed that for both the FWH and WBW bandwidths the best separability was reached when computing the 10th percentile, achieving a p-value (0.00007) for DispEn in FWH, c = 7 and m = 2, associated with lower complexity preterm deliveries, indicating that DispEn is a promising parameter for preterm labor prediction., This work was supported by the Spanish ministry of economy and competitiveness, the European Regional Development Fund (MCIU/AEI/FEDER, UE RTI2018-094449-A-I00-AR) and the Generalitat Valenciana (AICO/2019/220).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

The relationship between motivation and performance of university students

  • Nolé-Fajardo, Maria Luisa|||0000-0001-9476-9387
  • Marín-Morales, Javier|||0000-0003-1271-2892
  • Llinares Millán, María Del Carmen|||0000-0003-2270-807X
  • Higuera-Trujillo, Juan Luis
[EN] Different variables affect the performance of university students. Motivation is one of them, so teachers try to enhance it through their teaching methodologies. However, most of the studies focused on the influence of motivation come from a single experimental situation, so extrinsic variables such as the specific design of the classroom could be affecting it simultaneously. Therefore, although there are reasons to consider that higher motivation helps to increase cognitive performance, the quantification of this relationship is not clear. This was the aim of the present study: to evaluate the relationship of motivation in students' cognitive performance in different design situations, so that the design effect is diluted. For this purpose, a field study was conducted. 100 university students carried out cognitive performance tests in two very different real classrooms, after which they were asked about their motivation. The quantification of performance focused on memory (remembering an auditory list of words, similar to the experiments based on the DRM paradigm) and attention (reaction time to auditory stimuli, similar to the auditory and continuous performance experiments). The quantification of motivation was done through the Spanish version of the EMSI scale, making it possible to discern between intrinsic motivation, external regulation, identified regulation, and amotivation. The results show that there are very strong relationships between motivation and performance in attention and memory; especially in attention. Results may be of interest for educators and for researchers., This work was supported by the Ministerio de Economía, Industria y Competitividad of Spain (Project BIA2017-86157-R, and PRE2018-084051). The first author is supported by Ministerio de Educación (FPU19/03531).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Recommending Learning Videos for MOOCs and Flipped Classrooms

  • Jordán, Jaume|||0000-0003-0400-9136
  • Valero Cubas, Soledad|||0000-0003-4565-326X
  • Turró Ribalta, Carlos|||0000-0002-3840-9405
  • Botti V.|||0000-0002-6507-2756
[EN] New teaching approaches are emerging in higher education, such as flipped classrooms. In addition, academic institutions are offering new types of training like Massive Online Open Courses. Both of these new ways of education require high-quality learning objects for their success, with learning videos being the most common to provide theoretical concepts. This paper describes a hybrid learning recommender system based on content-based techniques, which is able to recommend useful videos to learners and teachers from a learning video repository. This hybrid technique has been successfully applied to a real scenario such as the central video repository of the Universitat Politècnica de València., This work was partially supported by MINECO/FEDER RTI2018-095390-B-C31 and TIN2017-89156-R projects of the Spanish government, and PROMETEO/2018/002 project of Generalitat Valenciana. J. Jordán and V. Botti are funded by UPV PAID-06-18 project. J. Jordán is also funded by grant APOSTD/2018/010 of Generalitat Valenciana - Fondo Social Europeo.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Efficient Malicious UAV Detection Using Autoencoder-TSMamba Integration

  • Akhtarshenas, Azim
  • López-Pérez, David
  • Toosi, Ramin
  • Alizadeh, Tohid
  • Hosseini, Alireza
[EN] Malicious Unmanned Aerial Vehicles (UAVs) present a significant threat to next-generation networks (NGNs), posing risks such as unauthorized surveillance, data theft, and the delivery of hazardous materials. This paper proposes an integrated (AE)-classifier system to detect malicious UAVs. The proposed AE, based on a 4-layer Tri-orientated Spatial Mamba (TSMamba) architecture, effectively captures complex spatial relationships crucial for identifying malicious UAV activities. The first phase involves generating residual values through the AE, which are subsequently processed by a ResNet-based classifier. This classifier leverages the residual values to achieve lower complexity and higher accuracy. Our experiments demonstrate significant improvements in both binary and multi-class classification scenarios, achieving up to 99.8% recall compared to 96.7% in the benchmark. Additionally, our method reduces computational complexity, making it more suitable for large-scale deployment. These results highlight the robustness and scalability of our approach, offering an effective solution for malicious UAV detection in NGN environments., This research is supported by the Generalitat Valenciana through the CIDEGENT PlaGenT, Grant CIDEXG/2022/17, Project iTENTE.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Multi-tenant Data Management in Collaborative Zero Defect Manufacturing

  • Fraile Gil, Francisco|||0000-0002-3275-7740
  • Ortiz Bas, Ángel|||0000-0001-5690-0807
  • Montalvillo, Leticia
  • Rodríguez-Sánchez, María De Los Ángeles
  • Navarro, Héctor
[EN] This research paper describes different patterns and best practices to effectively implement multi-tenancy of production sensor data in collaborative applications. The paper explains the design considerations taken to support multi-tenancy in the Zero Defects Manufacturing Platform (ZDMP), using concrete collaborative use cases as an example. The main objective is to provide an overview of multi-tenancy as an enabler of collaborative use cases in digital manufacturing platforms, describe the different design patterns, the main trade-offs, and best practices., This work was supported in part by the European Commission under the Grant Agreement 825631. The author María Ángeles Rodríguez was supported by the Generalitat Valenciana (Conselleria de Educación, Investigación, Cultura y Deporte) under Grant-Agreement ACIF/2019/021.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Diseño y Exploración de Aceleradores Hardware en la Plataforma SELENE

  • Andreu-Cerezo, Pablo|||0000-0003-2070-9271
  • López Rodríguez, Pedro Juan|||0000-0003-4544-955X
  • Flich Cardo, José
  • Hernández Luz, Carles|||0000-0003-1192-6223
  • Picornell, Tomás
  • Kostalampros, Vatistas
  • Moreto, Miquel
[ES] El diseño de aceleradores hardware esta adquiriendo una gran importancia debido al aumento de aplicaciones que usan redes neuronales y la aproximacion al l¿mite de la ley de Moore. En este contexto, la exploracion de las opciones de diseño de estos aceleradores y su impacto en el rendimiento necesita de plataformas donde integrar dichos aceleradores de manera agil. Con esa finalidad este trabajo presenta la plataforma de SELENE, una plataforma abierta donde es sencillo integrar aceleradores diseñados en Xilinx HLS o con interfaz estandar AXI para su testeo en FPGA., El presente trabajo ha sido parcialmente financiado mediante el proyecto IPMAN (Tecnicas Innovadoras para Infraestructuras, Aplicaciones y Servicios en Centros de Datos y Sistemas Altamente Distribuidos) con referencia PID2021-123627OB-C51 y por la Generalitat Valenciana mediante el proyecto Subvenciones para la contratacion de personal investigador predoctoral con codigo CIACIF/2021/412.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A Generalization and Paradigm-Independent Reformulation of Algorithmic Debugging

  • Insa Cabrera, David
  • Silva, Josep|||0000-0001-5096-0008
Algorithmic debugging is a semi-automatic debugging technique that is present in practically all mature programming languages. In this paper we claim that the state of the practice in algorithmic debugging is a step forward compared to the state of the theory. In particular, we argue that novel techniques for algorithmic debugging cannot be supported by the standard internal data structures used in this technique, and a generalization of the standard definitions and algorithms is needed. We identify two specific problems of the standard formulation and implementations of algorithmic debugging, and we propose a reformulation to solve both problems. The reformulation has been done in a paradigm-independent manner to make it useful and reusable in different programming languages., This work has been partially supported by the EU (FEDER) and the Spanish Ministerio de Economía y Competitividad (Secretaría de Estado de Investigación, Desarrollo e Innovación) under Grant TIN2013-44742-C4-1-R and by the Generalitat Valenciana under Grant PROMETEOII/2015/013. David Insa was partially supported by the Spanish Ministerio de Educación under FPU Grant AP2010-4415.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Developing a depth-based tracking systems for interactive playful environments with animals

  • Pons Tomás, Patricia
  • Catalá Bolós, Alejandro
  • Jaén Martínez, Francisco Javier|||0000-0002-8815-9643
[EN] Digital games for animals within Animal Computer Interaction are usually single-device oriented, however richer interactions could be delivered by considering multimodal environments and expanding the number of technological elements involved. In these playful ecosystems, animals could be either alone or accompanied by human beings, but in both cases the system should react properly to the interactions of all the players, creating more engaging and natural games. Technologically-mediated playful scenarios for animals will therefore require contextual information about the game participants, such as their location or body posture, in order to suitably adapt the system reactions. This paper presents a depth-based tracking system for cats capable of detecting their location, body posture and field of view. The proposed system could also be extended to locate and detect human gestures and track small robots, becoming a promising component in the creation of intelligent interspecies playful environments., Work supported by the Spanish Ministry of Economy and Competitiveness and funded by the EDRF-FEDER (TIN2014-60077-R). The work of Patricia Pons has been supported by a national grant from the Spanish MECD (FPU13/03831). Alejandro Catalá also received support from a VALi+d fellowship from the GVA (APOSTD/2013/013). Special thanks to our cat participants, their owners, and our feline caretakers and therapists
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Assisting Electrophysiological Substrate Quantification in Atrial Fibrillation Ablation

  • Vraka, Aikaterini
  • Hornero, Fernando
  • Osca, Joaquín
  • Faes, Luca
  • Alcaraz, Raúl
  • Rieta, J J|||0000-0002-3364-6380
[EN] Catheter ablation (CA) is the most popular treatment of atrial fibrillation (AF) with good results in paroxysmal AF, while its efficiency is significantly reduced in persistent AF. With the equipment used for CA strongly depending on electro-gram (EGM) fractionation quantification, the use of a reliable fractionation estimator is crucial to reduce the high recurrence rates in persistent AF. This work introduces a non-linear EGM fractionation quantification technique, which is based on coarse-grained correlation dimension (CGCD) computed over epochs of 1 second. Recordings were firstly normalized, denoised and lowpass filtered. The final CGCD value was calculated by the median CGCD value of all the epochs that a recording consisted of. Results were evaluated on three groups. Groups 1 and 2 contained 24 high-quality and 119 mid-range EGMs, respectively, manually pre-classified by AF types following Wells' criteria, then classified according to their CGCD values. 20 pseudo-real Type IV EGMs formed group 3 that was also automatically classified by AF type. In Groups 1 and 2, classification accuracy was 100% and 84-85.7%, respectively, using 10-fold cross-validation. The receiver-operating characteristics (ROC) analysis for highly fractionated EGMs, showed 100% specificity and sensitivity in Group 1 and 87.5% specificity and 93.6% sensitivity in Group 2. CGCD was always consistent with the fractionation degree of EGMs. 100% of the EGMs in Group 3 were correctly identified as Type IV AF. High accuracy results indicate that the method can estimate precisely the AF Type and detect the existence of AF Type IV cases. Both things are crucial in assisting improved substrate mapping during CA procedures of persistent AF., Research supported by grants DPI2017-83952-C3 from MINECO/AEI/FEDER UE, SBPLY/17/180501/000411 from JCCLM and AICO/2019/036 from GVA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Protocol Analysis with Time

  • Aparicio-Sánchez, Damián
  • Meadows, Catherine
  • Meseguer, José
  • Escobar Román, Santiago|||0000-0002-3550-4781
  • Sapiña-Sanchis, Julia|||0000-0003-2994-6986
[EN] We present a framework suited to the analysis of cryptographic protocols that make use of time in their execution. We provide a process algebra syntax that makes time information available to processes, and a transition semantics that takes account of fundamental properties of time. Additional properties can be added by the user if desirable. This timed protocol framework can be implemented either as a simulation tool or as a symbolic analysis tool in which time references are represented by logical variables, and in which the properties of time are implemented as constraints on those time logical variables. These constraints are carried along the symbolic execution of the protocol. The satisfiability of these constraints can be evaluated as the analysis proceeds, so attacks that violate the laws of physics can be rejected as impossible. We demonstrate the feasibility of our approach by using the Maude-NPA protocol analyzer together with an SMT solver that is used to evaluate the satisfiability of timing constraints. We provide a sound and complete protocol transformation from our timed process algebra to the Maude-NPA syntax and semantics, and we prove its soundness and completeness. We then use the tool to analyze Mafia fraud and distance hijacking attacks on a suite of distance-bounding protocols., This paper was partially supported by the EU (FEDER) and the Spanish MCIU under grant RTI2018-094403-B-C32, by the Spanish Generalitat Valenciana under grant PROMETEO/2019/098 and APOSTD/2019/127, by the US Air Force Office of Scientific Research under award number FA9550-17-1-0286, and by ONR Code 311.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A Neural, Interactive-predictive System for Multimodal Sequence to Sequence Tasks

  • Peris, Álvaro
  • Casacuberta Nolla, Francisco|||0000-0002-8497-5598
[EN] We present a demonstration of a neural interactive-predictive system for tackling mul- timodal sequence to sequence tasks. The system generates text predictions to different sequence to sequence tasks: machine translation, image and video captioning. These predictions are revised by a human agent, who introduces corrections in the form of characters. The system reacts to each correction, providing alternative hypotheses, compelling with the feed-back provided by the user. The final objective is to reduce the human effort required during this correction process. This system is implemented following a client server architecture. For accessing the system, we developed a website, which communicates with the neural model, hosted in a local server. From this website, the different tasks can be tackled following the interactive-predictive framework. We opensource all the code developed for building this system., We acknowledge the anonymous reviewers for their helpful suggestions. The research leading to these results has received funding from the Generalitat Valenciana under grant PROMETEOII/2014/030 and from TIN2015-70924-C2-1- R. We also acknowledge NVIDIA Corporation for the donation of GPUs used in this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Unveiling Outcomes from eID@Cloud and EUROLogin CEF Actions in EU Citizen Identification for the Private Sector

  • De-Siqueira, J.M.|||0000-0002-4579-1147
  • Magal-Royo, Teresa|||0000-0002-7640-6264
  • Cirilo-Gimeno, Ramon V.
  • Garcia Celda, Antonio
  • Saez, Arturo
  • Martinez-Plume, Javier
[EN] In recent years, a focused initiative aimed to enhance cross-border citizen identification across Europe by integrating electronic ser- vices within the private sector with eIDAS nodes. This study ex- plores outcomes from three pivotal eIdentification projects co- funded by the European Commission under the CEF (Connect- ing Europe Facility) eIDentification Programme: eID@Cloud, EU- ROLogin, and EUROLogin2020 CEF Actions. Involving 12 Trust Ser- vice Providers across 10 MS, including Belgium, Cyprus, Denmark, France, Iceland, Italy, Netherlands, Norway, Spain, and the United Kingdom, these projects facilitated the European Commission in assessing the eIDAS network¿s technical proposal and usability in the private sector, expediting the implementation of eIDAS nodes in select MS. The paper focuses on demonstrating the technical feasibility of national eIDAS node infrastructure and its support for electronic services in the private sector. It details project im- plementations and key results in each Member State, scrutinizing the national landscape at both project initiation and conclusion. Additionally, it outlines expectations from the CEF eIdentification program for these projects, emphasizing the private sector, and explores barriers to achieving seamless cross-border citizen iden- tification, acknowledging challenges and bottlenecks within the eIDAS model contingent upon individual Member State support. By elucidating these challenges, the paper contributes to the ongo- ing discourse on the future integration of electronic identification solutions for private sector services and other cross-border infras- tructures, utilizing a centralized model contingent upon national governance., This article emerged from the results of the eID@Cloud (2016-EU-IA-0064), EUROLogin (2018-EU-IA-0026) and EUROLogin2020 (2020-ES-IA-0025) CEF eID Actions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Transcranial acoustic holograms for arbitrary fields generation using focused ultrasound into the brain

  • Jiménez-Gambín, Sergio
  • Jimenez, Noe|||0000-0002-6539-670X
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
[EN] We present 3D printed holographic lenses that correct the aberrations of the skull and, simultaneously, produce arbitrary ultrasonic fields with the geometry of brain structures. Using experimental techniques on a human skull phantom (HSP), a multiple-point focusing lens is designed to focus at both human hippocampi at once; a beam following an arbitrary curved trajectory, i.e., a self-bending beam; and a holographic plate producing a broad focus that overlaps with the left hippocampus (LH). Skull and LH geometries and acoustic properties are obtained from CT-scans and MRI, respectively. Time-reversal (TR) method is used to obtain the magnitude and phase of the back-propagated field from the target shape towards the lens surface. The holographic lenses are designed assuming each pixel of the lens vibrates as a Fabry-Pérot resonator. The resulting lenses are 3D printed using SLA techniques. The three studied cases show similar results in simulation and experiment with and without the HSP: for the bi-focal beam, the reconstructed field accurately matches the target foci; for the curved trajectory beam, the target acoustic image is reconstructed by the designed holographic lens; for the broad focus beam, results present the same qualitative performance providing a similar overall covering of the LH. The reported holographic lenses can be used to control the spatial features of ultrasonic beams inside the skull in an unprecedented manner using single-element ultrasonic sources., This work was supported by Generalitat Valenciana through grants APOSTD/2017/042, ACIF/2017/045 and GV/2018/11. FC acknowledges financial support from Agencia Valenciana de la Innovacio through grant INNCON00/18/9 and European Regional Development Fund (IDIFEDER/2018/022).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Use of web applications to manage and plan a PhD thesis

  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Fombuena, Vicent|||0000-0001-7266-6205
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Balart, Rafael|||0000-0001-5670-7126
  • Rojas-Lema, Sandra Paola
[EN] A doctoral thesis is a major work that lasts approximately 3 years. During this period, the doctoral student faces with a large number of tasks that must be planned and structured in order to increase the productivity of work of this nature. In this paper it is presented an experience of using a set of a free web and mobile application (Trello) for the management and planning of the tasks of the thesis, with the aim of increasing the motivation and productivity of doctoral students in the development of their PhD. With the application of these computer tools in a systematic and planned way during the development of the research work, it has been proven that the results are improved as a result of the structuring, the student assumes more responsibility and is more inclined to take the initiative, the task planning also facilitates the subsequent documentation of results. Therefore, the use of these tools makes it easier to achieve the final objective of the development of a doctoral thesis, which is that the student demonstrates that can generate knowledge., The authors would like to acknowledge the support of the Institute of Educational Sciences (ICE) of Universitat Politècnica de València for supporting the PIME reference B18/18.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Mapping Study about Usability Requirements Elicitation

  • Ormeño Ayala, Yeshica Isela
  • Panach Navarrete, Jose Ignacio
[EN] The HCI community has developed guidelines and recommendations for improving the usability system that are usually applied at the last stages of the software development process. On the other hand, the SE community has developed sound methods to elicit functional requirements in the early stages, but usability has been relegated to the last stages together with other nonfunctional requirements. Therefore, there are no methods of usability requirements elicitation to develop software within both communities. An example of this problem arises if we focus on the Model-Driven Development paradigm, where the methods and tools that are used to develop software do not support usability requirements elicitation. In order to study the existing publications that deal with usability requirements from the first steps of the software development process, this work presents a mapping study. Our aim is to compare usability requirements methods and to identify the strong points of each one, This work has been developed with the support of MICINN (PROS-Req TIN2010-19130-C02-02), UV (UV-INV-PRECOMP12-80627), GVA (ORCA PROMETEO/2009/015), and co-financed with ERDF. We acknowledge the support of the ITEA2 Call 3 UsiXML (20080026) and funding by the MITYC (TSI-020400-2011-20)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Integrating technical debt into MDE

  • Giraldo Velásquez, Faber Danilo
  • España Cubillo, Sergio
  • Pineda, Manuel A.
  • Giraldo, William J.
  • Pastor López, Oscar|||0000-0002-1320-8471
The main goal of this work is to evaluate the feasibility to calculate the technical debt (a traditional software quality approach) in a model-driven context through the same tools used by software deve- lopers at work. The SonarQube tool was used, so that the quality check was performed directly on projects created with Eclipse Modeling Frame- work (EMF) instead of traditionals source code projects. In this work, XML was used as the model speci cation language to verify in Sonar- Qube due to the creation of EMF metamodels in XMI (XML Metadata Interchange) and that SonarQube o ers a plugin to assess the XML lan- guage. After this, our work focused on the de nition of model rules as an XSD schema (XML Schema De nition) and the integration between EMF-SonarQube in order that these metrics were directly validated by SonarQube; and subsequently, this tool determined the technical debt that the analyzed EMF models could contain, F. G, thanks to Colciencias (Colombia) for funding this work through the Colciencias Grant call 512-2010. This work has been supported by the Spanish MICINN PROS-Req (TIN2010-19130-C02-02), the Generalitat Valenciana Project ORCA (PROMETEO/2009/015), the European Commission FP7 Project CaaS (611351), and ERDF structural funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Overview of PAN 2021: Authorship Verification, Profiling Hate Speech Spreaders on Twitter, and Style Change Detection.

  • Bevendorff, Janek
  • Chulvi-Ferriols, María Alberta
  • Peña-Sarracén, Gretel Liz de la
  • Kestemont, Mike
  • Manjavacas, Enrique
  • Markov, Ilia
  • Mayerl, Maximilian
  • Potthast, Martin
  • Rangel, Francisco
  • Stamatatos, Efstathios
  • Stein, Benno
  • Wiegmann, Matti
  • Wolska, Magdalena
  • Zangerle, Eva
  • Rosso, Paolo|||0000-0002-8922-1242
[EN] The paper gives a brief overview of the three shared tasks to be organized at the PAN 2021 lab on digital text forensics and stylometry hosted at the CLEF conference. The tasks include authorship verification across domains, author profiling for hate speech spreaders, and style change detection for multi-author documents. In part the tasks are new and in part they continue and advance past shared tasks, with the overall goal of advancing the state of the art, providing for an objective evaluation on newly developed benchmark datasets., The work of the researchers from Universitat Politecnica de Valencia was partially funded by the Spanish MICINN under the project MISMISFAKEnHATE on MISinformation and MIScommunication in social media: FAKE news and HATE speech (PGC2018-096212-B-C31), and by the Generalitat Valenciana under the project DeepPattern (PROMETEO/2019/121).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Effect of noise in CT image reconstruction using QR- Decomposition algorithm

  • Iborra, A.
  • Soriano, A.
  • Bellido, P.
  • Conde, P.
  • Crespo, E.
  • Martos, F.
  • Rigla, J. P.
  • Rodríguez-Álvarez, M.J.|||0000-0001-8333-8792
  • F Sánchez
  • González Martínez, Antonio Javier
  • Moliner Martínez, Laura
  • Seimetz, Michael
  • Vidal San Sebastian, Luis Fernando|||0000-0001-8852-8560
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
[EN] The QR-Decomposition algorithm for CT 3D image reconstruction uses a linear system of equations to model the CT system response. Linear systems have a condition number that can be used to estimate the image noise. In this work the number of projections and the number of pixels in the detector have been studied to characterize the CT and the linear system of equations. The condition number of the system is estimated for the previous parameters used to generate the CT model with the aim of characterizing how these parameters affect the condition number and therefore bound the image noise level. It is shown that the condition number mainly depends on the size of pixels of the detector rather than the number of projections and this algorithm can be applied to low dose CT 3D image reconstruction without compromising image quality, This work was supported by the Spanish Plan Nacional de Investigacion Científica, Desarrollo e Innovación Tecnológica (I+D+I) under Grant No. FIS2010-21216-CO2-01 and Valencian Local Government under Grants PROMETEOII/2013/010 and ISIC 2011/013
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

SYNPA: SMT Performance Analysis and Allocation of Threads to Cores in ARM Processors

  • Navarro-Edo, Marta|||0000-0002-4334-460X
  • Feliu-Pérez, Josué|||0000-0003-3017-4266
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[EN] Simultaneous multithreading processors improve throughput over single-threaded processors thanks to sharing internal core resources among instructions from distinct threads. However, resource sharing introduces inter-thread interference within the core, which has a negative impact on individual application performance and can significantly increase the turnaround time of multi-program workloads. The severity of the interference effects depends on the competing co-runners sharing the core. Thus, it can be mitigated by applying a thread-to-core allocation policy that smartly selects applications to be run in the same core to minimize their interference. This paper presents SYNPA, a simple approach that dynamically allocates threads to cores in an SMT processor based on their run-time dynamic behavior. The approach uses a regression model to select synergistic pairs to mitigate intracore interference. The main novelty of SYNPA is that it uses just three variables collected from the performance counters available in current ARM processors at the dispatch stage. Experimental results show that SYNPA outperforms the default Linux scheduler by around 36%, on average, in terms of turnaround time in 8-application workloads combining frontendbound and backend-bound benchmarks. Index Terms¿Simultaneous Multithreading, Scheduling, HighPerformance Computing, HPC applications, Thread-to-Core allocation, synergistic applications, intra-core interference., This work has been supported by the Spanish Ministerio de Ciencia e Innovacion and European ERDF under grant PID2021-123627OB-C51, TED2021-130233B-C32 and Generalitat Valenciana under grant AICO/2021/266. Marta Navarro is supported by Subvenciones para la contratacion de personal investigador predoctoral by CIACIF/2021/413 . Josue Feliu is supported by the RYC2021-030862-I contract, funded by the MCIN/AEI /10.13039/501100011033 and the European Union NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Are Coronary Sinus Features Reflecting the Effect of Catheter Ablation of Atrial Fibrillation as P-waves Do?

  • Vraka, Aikaterini
  • Bertomeu-González, Vicente
  • Hornenro, Fernando
  • Langley, Philip
  • Alcaraz, Raúl
  • Rieta, J J|||0000-0002-3364-6380
[EN] Atrial substrate alteration due to catheter ablation (CA) of atrial fibrillation (AF) is primarily assessed from P-waves. Nonetheless, how CA affects critical structures is ignored. The aim of the current study is to investigate if CA effect on CS, the principal CA reference, is related to that observed from P-waves analysis. Five-minute lead II and bipolar CS recordings of 29 paroxysmal AF patients were obtained before, during and after CA. Duration, amplitude, area and heart-rate (HR) variability (HRV) features were calculated for P-waves and local activation waves (LAWs). Normalization mitigated the effect of HR fluctuations. Linear correlations between each P-wave and LAW were tested with linear regression (LR) and Pearson correlation (PC) and nonlinear correlations with cross-quadratic sample entropy (CQSE). Correlation between the CA effect on P-waves and LAWs was investigated with PC. Negligent statistical correlations were found by PC and LR for amplitude and area (¿3.30%< corr < +18.36%, p < 0.0142). After normalization, correlation in duration increased from non-significant to significant and from low to moderate (up to 47.25%, p < 0.0001). CQSE values were from 0.6 to 1.2. The effect of CA on P-waves and LAWs duration showed a moderate/high concordance after normalization (from 50% to 89%, p < 0.0210) and a highly tuned HRV (> 90%, p < 0.0297). Apart from HRV, no significant correlations between CS LAWs and P-waves have been found. HR fluctuations mask any possible tuning and normalization should be applied prior to the analysis., Research supported by grants DPI2017-83952-C3 from MINECO/AEI/FEDER UE, SBPLY/17/180501/000411 from JCCLM and AICO/2021/286 from GVA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Obtención del Espectro Primario de Rayos X con los Códigos PENELOPE Y MCNPS

  • Pozuelo, Fausto
  • Querol Vives, Andrea
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • Ródenas Diago, José|||0000-0003-3283-9188
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[ES] Conocer el espectro primario de rayos X es muy importante en el Control de Calidad de los tubos de rayos X, ya que permite conocer mejor, y por tanto reducir, la dosis impartida a los pacientes. Sin embargo, obtener el espectro primario resulta complicado para los controles rutinarios, de ahí que se midan los parámetros de calidad del espectro, en lugar de obtener su espectro primario. En este caso, se utilizan los códigos PENELOPE y MCNP5, basados en el método Monte Carlo, para obtener el espectro de rayos X teniendo en cuenta las características del tubo de rayos X. Con el fin de conseguir un mayor ajuste del espectro simulado al teórico, se ha realizado un análisis de sensibilidad de los parámetros disponibles en ambos códigos. La obtención del espectro simulado podría suponer una mejora dentro del control de calidad de los tubos de rayos X al incorporarlo como un método complementario a las técnicas utilizadas. Los espectros simulados se han comparado con sus respectivos teóricos, extraídos del catalogo IPEM-78, mediante el cálculo del error cuadrático mínimo y los parámetros de calidad del espectro como la capa de hemirreducción. Esta comparación permite determinar que la simulación obtenida es aceptable. Del análisis de sensibilidad realizado con el código PENELOPE se ha obtenido que el parámetro FORCE es una de las variables más importantes para conseguir un buen ajuste entre el espectro simulado y el teórico. La elección de su valor debe ser óptima, de modo que se obtenga un buen ajuste al espectro teórico con un tiempo de computación aceptable. Los resultados obtenidos demuestran que para conseguir un mejor ajuste es necesario un valor alto de FORCE, sin embargo esto aumenta el tiempo de computación. Por otra parte, se ha observado que con un valor bajo de este parámetro no se obtienen importantes diferencias en cuanto a la dosis en profundidad y si se consigue disminuir el tiempo de computación., Este trabajo, ha sido parcialmente financiado por la Generalitat Valenciana dentro del proyecto de investigación GVPRE/2008/136, y la Universitat Politècnica de València dentro del proyecto PAID‐06‐07‐3300. Así como por la beca de Formación de Profesorado Universitario (FPU) del Ministerio de Educación y Ciencia, referencia AP2009‐2600.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

PSPU-Net for Automatic Short Axis Cine MRI Segmentation of Left and Right Ventricles

  • Pérez-Pelegrí, Manuel
  • Moratal, David|||0000-0002-2825-3646
  • Monmeneu, Jose V.
  • López-Lereu, María P.
  • Ruiz-España, Silvia
  • Del-Canto, Irene
  • Bodi, Vicente
[EN] Characterization of the heart anatomy and function is mostly done with magnetic resonance image cine series. To achieve a correct characterization, the volume of the right and left ventricle need to be segmented, which is a timeconsuming task. We propose a new convolutional neural network architecture that combines U-net with PSP modules (PSPU-net) for the segmentation of left and right ventricle cavities and left ventricle myocardium in the diastolic frame of short-axis cine MRI images and compare its results against a classic 3D U-net architecture. We used a dataset containing 399 cases in total. The results showed higher quality results in both segmentation and final volume estimation for a test set of 99 cases in the case of the PSPU-net, with global dice metrics of 0.910 and median absolute relative errors in volume estimations of 0.026 and 0.039 for the left ventricle cavity and myocardium and 0.051 for the right ventricles cavity., DM acknowledges financial support from the Conselleria d'Educacio, Investigacio, Cultura i Esport, Generalitat Valenciana (grants AEST/2019/037 and AEST/2020/029), from the Agencia Valenciana de la Innovacion, Generalitat Valenciana (ref. INNCAD00/19/085), and from the Centro para el Desarrollo Tecnologico Industrial (Programa Eurostars-2, actuacion Interempresas Internacional), Spanish Ministerio de Ciencia, Innovacion y Universidades (ref. CIIP20192020). We are grateful to Andres Larroza for his valuable technical assistance in the project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

ReverCSP: Time-Travelling in CSP Computations

  • Galindo, Carlos|||0000-0002-3569-6218
  • Silva, Josep|||0000-0001-5096-0008
  • Nishida, Naoki
  • Tamarit, Salvador
[EN] This paper presents reverCSP, a tool to animate both forward and backward CSP computations. This ability to reverse computations can be done step by step or backtracking to a given desired state of interest. reverCSP allows us to reverse computations exactly in the same order in which they happened, or also in a causally-consistent way. Therefore, reverCSP is a tool that can be especially useful to comprehend, analyze, and debug computations. reverCSP is an open-source project publicly available for the community. We describe the tool and its functionality, and we provide implementation details so that it can be reimplemented for other languages., This work has been partially supported by the EU (FEDER) and the Spanish MCI/AEI under grants TIN2016-76843-C4-1-R and PID2019- 104735RB-C41, and by the Generalitat Valenciana under grant Prometeo/2019/098 (DeepTrust).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Research protocol: What is the perception and knowledge that university students of engineering degrees have about Sustainable Development Goals (SFGs)?

  • Oltra Badenes, Raúl Francisco|||0000-0002-1522-8230
  • Guerola-Navarro, Vicente|||0000-0002-0367-6319
  • Gil Gómez, Hermenegildo|||0000-0002-7985-2454
  • Botella-Carrubi, Dolores|||0000-0002-3947-6490
  • Gil-Gómez, José-Antonio|||0000-0001-9954-2480
[EN] The main objective of the work presented in this communication is to present a research protocol. The practical application of the proposed protocol, will allow to know the perception and degree of knowledge that students of several Engineering Degrees in a specific University have regarding sustainability in general, and more specifically, about the Sustainable Development Goals (SGD) declared by the United Nations (UN). Once this perception and degree of knowledge is known, appropriate decisions and actions can be taken to improve the teaching-learning process in relation to it. In this way, knowing that starting point, it will be possible to increase the awareness and degree of knowledge of the students regarding the SDGs, designing and implementing different activities that, in a fully integrated way with the contents of a subject, can promote the sensitivity of the students towards the achievement of the SDG targets. This will enhance the focus of future graduates towards achieving the objectives through their work performance. Although the protocol is presented focused on a public higher education organization, and a specific degree and subject, this protocol can be applied without requiring too many adaptations, to any subject and degree.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Calcium sulfate setting monitoring with ultrasonic backscattering analysis

  • Rodríguez-Sendra, Josep|||0000-0001-5344-6602
  • Jimenez, Noe|||0000-0002-6539-670X
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
  • Faus, Joan
[Otros] Ultrasonic backscattering techniques are used to monitor the setting process of calcium sulfate. A 3.5 MHz frequency A-scan pulse-echo system is used to obtain the acoustic properties of a cylindrical sample of calcium sulfate (diameter= 36 mm; thickness= 18 mm). The temperature of the sample and the rf backscattering signal are measured every two seconds during the whole setting process (53 min; 1590 rf-signals). Apparent backscattering integral (AIB) [1], Nakagami parameter [2] and sound speed are calculated from each measured rf signal. A positive correlation is observed between the sound velocity, the AIB and the Nakagami parameter during the setting process, identifying three states of the sample: liquid, transient and solid. Sound velocity changes from 1480 m/s (liquid) to 2700 m/s (solid), meanwhile AIB changes between -15 dB and 0 dB. In the transient phase, the three parameters are sensible to the fast change in the mechanical properties of the medium. The presented results show that, by performing backscattering analysis, the state of a sample in a setting process can be determined, which could have application in monitoring changes in guided bone regeneration processes for dental implant procedures.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Automating Data Integration in Adaptive and Data-Intensive Information Systems

  • Galvão, João
  • Costa, Carlos
  • Santos, Maribel Yasmina
  • León-Palacio, Ana|||0000-0003-3516-8893
  • Pastor López, Oscar|||0000-0002-1320-8471
[EN] Data acquisition is no longer a problem for organizations, as many efforts have been performed in automating data collection and storage, providing access to a wide amount of heterogeneous data sources that can be used to support the decision-making process. Nevertheless, those efforts were not extended to the context of data integration, as many data transformation and integration tasks such as entity and attribute matching remain highly manual. This is not suitable for complex and dynamic contexts where Information Systems must be adaptative enough to mitigate the difficulties derived from the frequent addition and removal of sources. This work proposes a method for the automatic inference of the appropriate data mapping of heterogeneous sources, supporting the data integration process by providing a semantic overview of the data sources, with quantitative measures of the confidence level. The proposed method includes both technical and domain knowledge and has been evaluated through the implementation of a prototype and its application in a particularly dynamic and complex domain where data integration remains an open problem, i.e., genomics., This work has been supported by FCT Fundação para a Ciência e Tecnologia within the Project Scope: UID/CEC/00319/2019, the Doctoral scholarship PD/BDE/135100/2017 and European Structural and Investment Funds in the FEDER component, through the Operational Competitiveness and Internationalization Programme (COMPETE 2020) [Project nº 039479; Funding Reference: POCI-01-0247-FEDER-039479]. We also thank both the Spanish State Research Agency and the Generalitat Valenciana under the projects DataME TIN2016-80811-P, ACIF/2018/171, and PROMETEO/2018/176. Icons made by Freepik, from www.flaticon.com.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Implementation of an Innovative Model of the Comprehensive Energy Renovation Project of a Cultural Heritage Building in Ljubljana, Slovenia

  • Jejčič, Neva
  • Tomšič, Miha
  • Šijanec Zavrl, Marjana
[EN] Renovation of a building requires a comprehensive and targeted approach to managing the process from conceptual design to implementation and future use. Cultural heritage buildings are subject to specific legalities and restrictions in accordance with the conservation regime. The complexity of such a renovation process requires special knowledge and competence of the stakeholders involved. The key is constant and coordinated cooperation among the designer, the cultural heritage protection authority, the investor, the users, the supervisor and the contractor. This rationale inspired the creation of a model of the comprehensive energy renovation process, balancing heritage conservation with energy efficiency through nine key elements and quality guidelines, developed within the LIFE IP CARE4CLIMATE project. The model includes detailed steps of the renovation with quality guidelines for the conceptual design, inspection of the building's condition, financial planning, comparison of variant renovation measures, energy performance analysis and investigation of several other aspects, for instance fire and electric safety, earthquake resistance and the quality of the indoor environment. The model includes support to the investor in the preparation of tenders, contractor selection, supervision, and building management and monitoring plan. This innovative model has been successfully implemented in renovation of several heritage buildings in Slovenia. A more detailed description of its implementation in practice is presented on an award-winning renovation project of heritage building in Ljubljana, Slovenia., This contribution was created under LIFE IP CARE4CLIMATE project (LIFE17 IPC/SI/000007), which is an integrated project co-ordinated by the Ministry of the Environment, Climate and Energy and co-financed by the European LIFE program, The Climate Change Fund and the project partners - https://www.care4climate.si/sl. The part of the study on end-users' needs was co-financed by the Public Agency for Scientific Research and Innovation of the RS, project ARIS J7-4599. The verification of HBR model was done according to the heritage renovation guidelines under scientific research project CRP V5-2358 (DEDIS), which is co-financed by the Public Agency for Scientific Research and Innovation of the RS, Ministry of Culture and Ministry of Environment, Climate and Energy of the RS.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Practical Study of the Temperature Effect in Soil Moisture Measurements

  • García-Navas, José Luis
  • Parra-Boronat, Mar
  • Parra-Boronat, Lorena
  • Rocher, Javier|||0000-0003-0182-1671
  • Sendra, Sandra|||0000-0001-9556-9088
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] Precision agriculture is a current tendency whose goal is to increase the crop production while reducing the water and fertilization use. The use of low cost sensors and Wireless Sensor Networks (WSNs) are frequently used to implement complex systems to control the irrigation process in crops. Taking into account the importance of developing these low cost systems, in this paper we present a practical study that compares a commercial soil moisture sensor with the prototype of our inductive soil moisture sensor, which is based on two solenoid coils. Additionally, we measure its performance as a function of the soil temperature to quantify the effect of this parameter in the sensor measurements. The results show that the temperature greatly affects the sensors measurements and, although our sensor could be used to measure the soil moisture as a function of the temperature, the configuration of two solenoids is not the most suitable to perform this kind of measurements, This work has been partially supported by the European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR by the Ministerio de Educación, Cultura y Deporte, through the Ayudas para contratación predoctoral de Formación del Profesorado Universitario FPU (Convocatoria 2016). Grant number FPU16/05540.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

LSTM-Based One-Pass Decoder for Low-Latency Streaming

  • Jorge-Cano, Javier|||0000-0002-9279-6768
  • Giménez Pastor, Adrián
  • Silvestre Cerdà, Joan Albert|||0000-0003-2291-8296
  • Civera Saiz, Jorge|||0000-0002-0963-0143
  • Sanchis Navarro, José Alberto|||0000-0002-2943-0990
  • Juan, Alfons|||0000-0002-9984-4072
  • Iranzo-Sánchez, Javier
[EN] Current state-of-the-art models based on Long-Short Term Memory (LSTM) networks have been extensively used in ASR to improve performance. However, using LSTMs under a streaming setup is not straightforward due to real-time constraints. In this paper we present a novel streaming decoder that includes a bidirectional LSTM acoustic model as well as an unidirectional LSTM language model to perform the decoding efficiently while keeping the performance comparable to that of an off-line setup. We perform a one-pass decoding using a sliding window scheme for a bidirectional LSTM acoustic model and an LSTM language model. This has been implemented and assessed under a pure streaming setup, and deployed into our production systems. We report WER and latency figures for the well-known LibriSpeech and TED-LIUM tasks, obtaining competitive WER results with low-latency responses., The research leading to these results has received funding from the European Union s Horizon 2020 research and innovation programme under grant agreement no. 761758 (X5gon);MCIU/AEI/FEDER,UE under the Multisub (RTI2018-094879-B-I00) research project and the Government of Spains FPU scholarship FPU18/04135.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Educación, arte y acciones artísticas. Herramientas de sensibilización para la igualdad de género

  • Zarraga Llorens, Josefa María|||0000-0003-4864-8511
[ES] Presento la acción artística como herramienta educativa para plantear la sensibilización sobre el género y la construcción de la identidad dentro de contextos universitarios, como el caso de la Escuela de Bellas Artes y la Escuela de Magisterio de Valencia. Esta intervención forma parte del proyecto de investigación con referencia CV/2020/069.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Acumulación y permanencia de arribazones de Posidonia oceanica en las playas de Mallorca y Menorca: una década de datos de videomonitorización costera

  • Gómez Pujol, Lluís
  • Arbona, Gabriel
  • Guevara, María Teresa
  • Fernández-Mora, Àngels
  • Orfila, Alejandro
[ES] En las costas mediterráneas, los fondos arenosos y rocosos están colonizados por biohermos de la fanerógama endémica Posidonia oceanica. Como ocurre con otras especies de plantas marinas y algas, ésta juega un papel importante en la dinámica de las playas puesto que contribuye a la acumulación de sedimentos, la atenuación del oleaje y las corrientes o a la propia estabilidad de la playa. Desde finales de verano hasta mediados del otoño, P. oceanica pierde sus hojas que aparecen acumuladas en la ribera formando estructuras de escasos centímetros a pocos metros de potencia que la bibliografía de raigambre francesa ha denominado ”banquetes”. En el presente trabajo, se presentan diez años de observaciones a propósito de la creación y dinámica de las bermas vegetales de P. oceanica a partir del registro de dos estaciones de videomonitorización costera para las playa de Cala Millor (NE Mallorca) i de Son Bou (S Menorca). Se identifican los estados de mar que provocan la salida y acumulación de bermas vegetales, así como su desmonte y tiempo de permanencia sobre la playa., Los autores agradecen el apoyo del proyecto Tech2Coast (TED2021-130949B-I00) financiado por MCIN/AEI/ 10.13039/501100011033 y por la UE “NextGenerationEU /PRTR”. La presente investigación se ha realizado en el marco de la acreditación AEI “Centro de Excelencia María de Maeztu” otorgada al IMEDEA (CSIC-UIB) (CEX2021-001198) y también es una contribución al proyecto de investigación LIFE AdaptCalaMillor – LIFE21 GIC/ES/101074227 financiado por la UE.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Explainability Across the Spectrum: Modeling Stakeholder Goals Based on AI Complexity Levels

  • Antoni Mestre
  • Albert Albiol, Manuela|||0000-0003-3747-400X
  • Pelechano Ferragud, Vicente|||0000-0003-1090-230X
  • Gil, Miriam
[EN] Explainability is a critical enabler of trust, usability, and regulatory compliance in artificial intelligence (AI) systems. In Hybrid Intelligence (HI) systems, where human expertise and AI collaborate to make decisions, the need for explainability becomes even more pronounced. However, the complexity of explainability requirements varies significantly depending on the role AI plays within the system. From human-dominant systems, where AI provides supportive insights, to AI-dominant systems, where AI assumes autonomous decision-making, the nature and depth of explanations required shift across this spectrum. Despite its importance, there is a lack of systematic approaches for tailoring explainability to meet stakeholder needs across these varying levels of AI complexity. This paper identifies the key components that shape explainability in HI systems, addressing the distinct roles and interactions of human and AI agents, as well as the diverse needs of stakeholders. In addition, the paper introduces a conceptual framework to assist designers in integrating explain-ability as a Non-Functional Requirement into HI systems. The framework leverages Goal-Oriented Requirements Engineering to facilitate the incorporation of suitable explainability NFRs into the design of HI systems, enabling designers to address challenges such as enhancing transparency, fostering trust, and meeting diverse stakeholder expectations. This research provides a first approach for advancing the design of adaptable, accountable, and trustworthy HI systems, contributing valuable insights to the fields of requirements engineering, human-AI collaboration, and regulatory compliance., This work has been developed with the financial support of the of the Generalitat Valenciana with TENTACLE (CIAICO/2023/089) and by the MINECO under project PRODIGIOUS PID2023-146224OB-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A performance comparison of CUDA remote GPU virtualization frameworks

  • Reaño González, Carlos
  • Silla, Federico|||0000-0002-6435-1200
Using GPUs reduces execution time of many applications but increases acquisition cost and power consumption. Furthermore, GPUs usually attain a relatively low utilization. In this context, remote GPU virtualization solutions were recently created to overcome the drawbacks of using GPUs. Currently, many different remote GPU virtualization frameworks exist, all of them presenting very different characteristics. These differences among them may lead to differences in performance. In this work we present a performance comparison among the only three CUDA remote GPU virtualization frameworks publicly available at no cost. Results show that performance greatly depends on the exact framework used, being the rCUDA virtualization solution the one that stands out among them. Furthermore, rCUDA doubles performance over CUDA for pageable memory copies., This work was funded by the Generalitat Valenciana under Grant PROMETEOII/2013/009 of the PROMETEO program phase II. Authors are also grateful for the generous support provided by Mellanox Technologies
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Interactive-predictive neural multimodal systems

  • Peris, Álvaro
  • Casacuberta Nolla, Francisco|||0000-0002-8497-5598
[EN] Despite the advances achieved by neural models in sequence to sequence learning, exploited in a variety of tasks, they still make errors. In many use cases, these are corrected by a human expert in a posterior revision process. The interactive-predictive framework aims to minimize the human effort spent on this process by considering partial corrections for iteratively refining the hypothesis. In this work, we generalize the interactive-predictive approach, typically applied in to machine translation field, to tackle other multimodal problems namely, image and video captioning. We study the application of this framework to multimodal neural sequence to sequence models. We show that, following this framework, we approximately halve the effort spent for correcting the outputs generated by the automatic systems. Moreover, we deploy our systems in a publicly accessible demonstration, that allows to better understand the behavior of the interactive-predictive framework., The research leading to these results has received funding from MINECO under grant IDIFEDER/2018/025 Sistemas de fabricacion inteligentes para la industria 4.0, action co-funded by the European Regional Development Fund 2014-2020 (FEDER), and from the European Commission under grant H2020, reference 825111 (DeepHealth). We also acknowledge NVIDIA Corporation for the donation of GPUs used in this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Ultrasonic Holograms to Enhance Hyperthermia Volumes

  • Andrés, Diana
  • Vappou, Jonathan
  • Jimenez, Noe|||0000-0002-6539-670X
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
[EN] In this work we numerically and experimentally study the performance of large-volume hyperthermia induced by acoustic holographic-modulated high-intensity focused ultrasound (AHmHIFU) in gelatin phantoms. Excellent agreement was found between thermal simulations of the AHmHIFU system and temperature maps characterized with Proton Resonance Frequency Shift MR-thermometry at 1.5 T. ROIs inside which experimental temperature elevation was greater than 4 degrees were 11 mm by 16 mm and 7 mm by 30 mm with and without the holographic lens, respectively. Most importantly, standard deviation inside these ROIs were equal to 12% and 40% of the maximum temperature with and without the lens. This demonstrates that a wider and more uniform heated region can be generated using the holographic lens, showing the capabilities of acoustic holograms to be used as a low-cost alternative for large-volume hyperthermia treatments, This research has been supported by the Spanish Ministry of Science, Innovation and Universities (MICINN) through grants IJC2018-037897-I, FPU19/00601 and PID2019-111436RBC22, by the Agencia Valenciana de la Innovaci o through grants INNCON/2021/8 and INNVA1/2020/92, by Generalitat Valenciana through grant AICO/2020/268. Action co-financed by the European Union through the Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) of the Comunitat Valenciana 2014-2020 (IDIFEDER/2018/022) and (IDIFEDER/2021/004).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Analysing nonlinear oscillators subject to Gaussian inputs via the random perturbation technique

  • Cortés, J.-C.|||0000-0002-6528-2155
  • López-Navarro, Elena|||0000-0003-0164-9007
  • Romero, José-Vicente|||0000-0003-3366-6557
  • Roselló, María-Dolores|||0000-0002-5724-7683
[EN] The aim of this paper is to perform a stochastic analysis of nonlinear oscillators subject to stationary Gaussian forcing sources using the random perturbation technique along with the Maximum Entropy Principle. By combining these two stochastic techniques, we construct reliable approximations of the probability density function of the solution, which is a stochastic process., This work has been supported by the Spanish Ministerio de Economía, Industria y Competitividad (MINECO), the Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER UE) grant MTM2017-89664-P. Elena Lopez Navarro has been supported by the European Union through the Operational Program of the [European Regional Development Fund (ERDF)/European Social Fund (ESF)] of the Valencian Community 2014-2020 (GJIDI/2018/A/010).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

The random variable transformation method to solve some randomized first-order linear control difference equations

  • Navarro-Quiles, A.
  • Real Herráiz, Julia Irene
  • Romero, José-Vicente|||0000-0003-3366-6557
  • Roselló, María-Dolores|||0000-0002-5724-7683
This work has been partially supported by the Spanish grant PID2020-115270GB-I00 funded by MCIN/AEI/10.13039/501100011033 and the grant AICO/2021/302 (Generalitat Valenciana).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

On the sum of the transmission and reflection coefficient on the Smith chart and 3D Smith chart

  • Müller, Andrei
  • Moldoveanu, A.
  • Asavei, V.
  • Favennec, J.F.
  • Sanabria-Codesal, Esther|||0000-0002-4523-1991
The paper presents in premiere a simple mapping property of the sum of the reflection and transmission parameters of reciprocal two port networks. It is proved that although the reflection and transmission parameter may have very complicated paths on the Smith chart, their sum will be always moving on the unit circle if the circuit is symmetric and lossless. Further once symmetrical losses at the ports occur their sum path will switch on a family of circles through one point. Using inversive geometry we construct a new function which maps this family of circles in lines on the extended Smith chart. The proposed method for checking the symmetry uses just two parameters and avoids testing the phase of the corresponding input and output parameters. By means of the 3D Smith chart we propose in the end an alternative approach to visualize the parameters., This work has been founded by SIWTUNE Marie Curie CIG no 322162, POSDRU/159/1.5/S/134398 and DGCYT MTM2012-33073 grants.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Flipped classroom and ICTs as the tools to reach key competences

  • Peñaranda, D.S.|||0000-0002-0861-976X
  • Vicente Antón, José Salvador|||0000-0003-0481-3802
  • Alfonso, Carmen
  • Jiménez, Francisco
[EN] The contemporary society demands proffessionals with competences directly conected to information and communication technology (ICT). In fact, the ICTs have registered a relevant advance through last decades, making possible the implantation of new educational strategies like: the inverted or flipped model. Nevertheless, ICT have been used in a superficial manner at educational system, even at higher education system.The aim of the present work will be the description of an innovative teaching programme which proposes the implantation of flipped classroom using ICTs to reach the key competences in two environments: students using English as foreign/second-language and students using Spanish as first language.The key competences will be developed through 5 e-learning activities. The students, outside of the classroom, will perform the tasks using ICTs and afterwards delivering the competence evidence. Once in classroom, the students should make a presentation of their work and open discussion will be performed.The teacher based on the indicators of achievement and competence evidence will be able to assess the grade of fulfillment of the key competence. Finally, the effectiveness of the teaching project will be evaluated making the comparison between the competence achievement before and after teaching programme implantation., This project has received funding from the Vicerectorado de Estudios, Calidad y Acreditación of the Universitat Politècnica de València (UPV) under Proyectos de Innovación y Mejora Educativa programme (PIME/2017/B/010) and the School of Agricultural Engineering and Environment (ETSIAMN) of the Universitat Politècnica de València (UPV)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Dynamic Allocation of Processor Cores to Graph Applications on Commodity Servers

  • Pons-Escat, Lucía|||0000-0002-4582-7744
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Jones, Timothy M.
[EN] Graph processing is increasingly adopted to solve problems that span many application domains, including scientific computing, social networks, and big-data analytics. These applications present particular features (huge working sets and irregular scalability) that make the default Linux scheduler, which adopts a time-sharing policy to provide a fair scheduler, perform poorly when co-locating multiple graph applications in the same processor. This work focuses on maximizing processor utilization, which is a major concern of current data centers. To this end, we propose AFAIR, a flexible scheduling policy that allocates multiple graph applications on the same processor and assigns a fraction of the cores exclusively to each application instead of sharing them. Moreover, AFAIR dynamically adds/removes cores to the running applications, adapting the number of threads used for parallel execution to balance memory load. This allows AFAIR to achieve almost perfect fairness, on average 95%., This work has been supported by the Spanish Ministerio de Universidades under the grant FPU18/01948 and by the Spanish Ministerio de Ciencia e Innovacion and European ERDF under grants PID2021-123627OB-C51 and TED2021- 130233B-C32.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Metodologías Agile para el desarrollo de softskills: aplicando SCRUM en titulaciones STEM

  • Castello-Sirvent, Fernando|||0000-0002-2088-0039
[ES] Este trabajo describe la aplicación de la metodología Scrum en estudios de grado y post-grado de la Escuela Técnica Superior de Ingeniería Industrial (ETSII) de la Universitat Politècnica de València y analiza esta metodología Agile como instrumento de desarrollo competencial para las softskills trabajo en equipo y liderazgo. Además, esta investigación evalúa la percepción que el alumnado de titulaciones STEM sobre ambas softskills integradas por la Universitat Politècnica de València en su programa de desarrollo competencial. El objetivo de esta investigación es evaluar las posibilidades que ofrece Scrum para el desarrollo de la competencia transversal de trabajo en equipo y liderazgo en los futuros titulados de ingeniería. Esta investigación se ha llevado a cabo dentro de los proyectos de innovación y mejora educativa (PIME / 19-20 Ref.150, Ref.151 y Ref.152) financiados por la Universitat Politècnica de València. El desarrollo competencial analizado se articula desde el fomento de la cooperación empleando una metodología Agile de amplio recorrido, apoyando el pensamiento crítico y la creatividad para la generación de soluciones rápidas y adecuadas que den adecuada respuesta a un contexto empresarial caracterizado por entornos VUCA (volátiles, inciertos, complejos y ambiguos). El trabajo de campo fue realizado durante el curso 2020-2021 aplicando metodología docente de tipo híbrido, esto es, de forma simultánea presencial y remota síncrona. La investigación sigue una metodología cualitativa que facilita la observación y descripción del proceso seguido, suponiendo una guía de reproducción para futuras investigaciones. Además, se suministró un cuestionario al alumnado, a fin de evaluar su percepción sobre la competencia transversal objeto de estudio y cómo esta percepción podía verse alterada en función de la aplicación de una metodología Agile para su desarrollo en el aula. Los resultados muestran diferencias de percepción sobre la competencia transversal trabajo en equipo y liderazgo, entre alumnos de grado y postgrado, así como entre hombres y mujeres. Las diferencias iniciales convergen tras la aplicación de Scrum en el aula, mejorando la percepción de utilidad de la competencia evaluada. Otro de los resultados revela mejores resultados en términos de cooperación y creatividad en las soluciones generadas por los diferentes equipos. Los alumnos modifican su percepción sobre la competencia transversal trabajo en equipo y liderazgo en función de la metodología empleada. El uso de metodologías Agile y su aplicabilidad en el aula fueron recibidas con un elevado grado de satisfacción entre el alumnado de titulaciones STEM. El uso de Scrum contribuyó a modificar el interés por un desarrollo profesional de dicha competencia a largo plazo. Este estudio permite fijar líneas de trabajo posteriores para desarrollar investigación que permita evaluar el desarrollo de softskills en un análisis longitudinal sobre titulados en grados y másteres STEM., PIME / 19-20 Ref.150, Ref.151 y Ref.152
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Is Short-Term Heart Rate Variability Good Enough to Predict Vascular Events in Hypertensive Patients?

  • Tornero, Roberto
  • Fácila, Lorenzo
  • Bertomeu-González, Vicente
  • Zangróniz, Roberto
  • Alcaraz, Raúl
  • Rieta, J J|||0000-0002-3364-6380
[EN] Vascular events are the main cause of premature death and disability in the developed countries, where there is great interest in the development of computational tools for their early detection. A very relevant variable for their study is the heart rate, that can be analyzed through heart rate variability (HRV). Furthermore, high blood pressure is an important risk factor for most cardiovascular diseases. In fact, small reductions in blood pressure are known to markedly reduce cardiovascular morbidity and mortality. This study evaluates the predictive value of short-term HRV (STHRV) by developing models based on data mining algorithms to stratify the risk of vascular events from hypertensive patients. For this specific framework, the performance of various machine learning models (Random Forest, Support Vector Machines, Gaussian Naive Bayes, K-N Nearest Neighbours and Logistic regression), trained with different time lengths of 5, 30 and 60 minutes of HRV features during sleep stage was compared. The analyzed HRV parameters were associated to time, frequency and nonlinear features. A total of 139 Holter recordings from hypertensive patients of whom 17 developed a vascular event were analyzed. Results indicated that classification models developed using STHRV, with only 5 minutes length, provided similar or even better results than those developed with longer time series. Furthermore, the STHRV models provided a higher sensitivity and a slightly higher F1 score. The best one, based on Support Vector Machines, yielded 88.2% sensitivity and 75% F1 score. Thus, this research suggests the feasibility of STHRV analysis for risk stratification of hypertensive patients to anticipate serious vascular events., Research supported by grants DPI2017¿83952¿C3 from MINECO/AEI/FEDER UE, SBPLY/17/180501/000411 from JCCLM and AICO/2021/286 from GVA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Parallel CT Reconstruction for Multiple Slices Studies with SuiteSparseQR Factorization Package

  • CHILLARÓN-PÉREZ, MÓNICA|||0000-0002-7611-8908
  • Vidal-Gimeno, Vicente-Emilio|||0000-0002-2384-7015
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] Algebraic factorization methods applied to the discipline of Computerized Tomography (CT) Medical Imaging Reconstruction involve a high computational cost. Since these techniques are significantly slower than the traditional analytical ones and time is critical in this field, we need to employ parallel implementations in order to exploit the machine resources and obtain efficient reconstructions. In this paper, we analyze the performance of the sparse QR decomposition implemented on SuiteSparseQR factorization package applied to the CT reconstruction problem. We explore both the parallelism provided by BLAS threads and the use of the Householder reflections to reconstruct multiple slices at once efficiently. Combining both strategies, we can boost the performance of the reconstructions and implement a reliable and competitive method that gets high-quality CT images., This research has been supported by Universitat Politècnica de València, Generalitat Valenciana under PROMETEO/2018/035 co-financed by FEDER funds, as well as ACIF/2017/075 predoctoral grant, and the Spanish Ministry of Economy and Competitiveness under Grant TIN2015-66972-C5-4-R and TIAMHA co-financed by FEDER funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Probabilistic analysis of scalar random differential equations with state-dependent impulsive terms via probability density functions

  • Bevia-Escrig, Vicente-José
  • Jornet, M.
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
This work has been partially supported by the Spanish Ministerio de Economia, Industria y Competitividad (MINECO), the Agencia Estatal de Investigacion (AEI) and Fondo Europeo de Desarrollo Regional (FEDER UE) grant PID2020-115270GB-I00, the Generalitat Valenciana (grant AICO/2021/302) and by el Fondo Social Europeo y la Iniciativa de Empleo Juvenil EDGJID/2021/185. Vicente Bevia acknowledges the doctorate scholarship granted by Programa de Ayudas de Investigacion y Desarrollo (PAID), Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

CLARA: Semi-automatic Retraining System

  • Campos-Mocholí, Mario|||0009-0009-4721-2207
  • Chacón-Albero, Oriol de la Pau
  • Julian, Vicente|||0000-0002-2743-6037
  • Botti V.|||0000-0002-6507-2756
  • Marco-Detchart, Cédric
  • Rincón-Arango, Jaime Andrés
[EN] Recent advancements in computer vision have led to humanlevel performance in image recognition tasks, but challenges persist in real-world applications due to differences in data distribution. This paper introduces CLARA, a semi-automatic framework designed to continually retrain computer vision models by incorporating expert annotation of new data. The system was tested in a production environment with a waste image classification model and showed improved performance and robustness against evolving data distributions. This approach encourages collaboration among stakeholders in waste management and utilizes human-in-the-loop strategies to enhance model accuracy. The framework is adaptable to various models and tasks and, additionally, supports fusion techniques that combine outputs from multiple models to improve prediction robustness and overall system reliability., This work was partially supported with grant tPID2021- 123673OB-C31 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe , grant CIPROM/2021/077 from the Conselleria de Innovació, Universitats, Ciencias i Societat Digital GVA - PROMETEO, grant PAID-06-23 by the Vice Rectorate Office for Research from UPV and project Reciclaje Inteligente y Cooperativo en Toda la Cadena de Valor Orientado a Una Sociedad Sostenible 360º (INNEST/2022/180) from AVI.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A virtual laboratory for an enhanced and safe understanding of the electric transformers operation

  • Bonet-Jara, Jorge|||0000-0003-4167-8734
  • Pons Llinares, Joan|||0000-0003-3756-1242
  • Bernal-Perez, Soledad|||0000-0002-5431-9792
  • Sabater i Serra, Roser|||0000-0002-5550-7066
[EN] The paper presents an educational software designed to simulate the behaviour of an electric transformer under no-load, shortcircuit and load test, measuring its input and output magnitudes through network analysers, and enabling the supply voltage and load regulations. This virtual laboratory allows to achieve several objectives. First, the student becomes familiar with the system to be operated in the real laboratory, reducing the subsequent electrical risk and optimizing the time required for carrying out the practice. Second, it enhances the understanding of transformers behaviour, its modelling through the equivalent electrical circuit, and the calculation of its two most characteristic parameters during its operation (performance and internal voltage drop). Finally, the application auto evaluates the transformer characterization performed by the student. The simulator reproduces schematically, but precisely, the assembly that the student faces during the lab lesson: an autotransformer to regulate the supply voltage, a transformer, two input and output network analysers, and different types of loads. The tool is structured in three panels. In the first panel, the student selects a transformer from 24 options, and performs its shortcircuit and no-load tests to characterize it through its electric equivalent circuit. Panels 2 and 3 enable load tests and its main characteristics calculation (performance and internal voltage drop). The student results are introduced in the app to perform auto-evaluation. To measure the performance and usefulness of the application, it has been implemented in the lab lessons of the subject ¿Electrical Technology¿, belonging to the Bachelor¿s Degree in Industrial Electronics and Automation Engineering, taught at the Polytechnic University of Valencia (Spain). The sample size is 96 students and the methodology used is as follows. The 96 students are subdivided into four groups. The practice lessons follow this sequence: a refreshment of the transformer concepts needed + explanation of the practice lesson to be performed + explanation and use of the app solving an example (only for groups 1 and 2) + real laboratory experience + final test on transformers. Finally, the performances between groups 1-2 and 3-4 are compared. It is observed that the students of groups 1 and 2 obtain better results in the final tests than those of groups 3 and 4, reaching higher levels of learning thanks to the previous use of the simulator. On the other hand, it is also observed that the time of completion of the real laboratory practice decreases substantially in groups 1 and 2. As a conclusion, there is a great benefit in using this application specifically designed to obtain very specific learning results, since the application is fully adapted to the needs of the degree and therefore to the level of knowledge that the students need to acquire according to the perception and experience of the teaching staff. Finally, based on the results, the application is permanently implemented in the laboratory lessons of Electrical Technology., This project is supported by Universitat Politècnica de València through the Project of Innovation and Educational Improvement Program (PIME 2018-2019/B26).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Challenge-based learning applied to the design and explanation of certain mass transfer unit operations against a panel of experts

  • Castelló Gómez, María Luisa|||0000-0002-4889-1792
  • Barrera Puigdollers, Cristina|||0000-0003-4408-3541
  • Seguí Gil, Lucía|||0000-0002-2711-9445
  • Heredia Gutiérrez, Ana Belén|||0000-0001-6629-9779
  • García Hernández, Jorge|||0000-0003-1258-6128
[EN] Technological advances of recent times make soft skills such as critical thinking, problem solving and collaborative work essential for university graduates to progress. Also, due to the ease of access to a large amount of information, alternative teaching-learning methods become necessary to catch the students¿ attention and motivate them to learn. To this end, challenge-based learning has been incorporated into the areas of science and engineering by involving students in real-world problems and in the development of specific solutions. In the context of the courses Transport Phenomena in the Food Industry I and II (Degree in Agrofood Engineering), 24 fourth-year students were challenged to fully describe and design a food process that includes both solid-liquid extraction and a hot air drying unit operation. To this aim, the students worked in groups of 3-4 people under the supervision of the lecturers. Students were asked to deliver 4 different tasks. Deliverable 1 consisted of a flow chart including the main stages of the process, which was carried out from the information found in different bibliographical sources. Along with it, an estimation of the mass flows of raw materials and finished products, together with the specification of the different variables involved in each one of the stages of the process were also submitted to evaluation (deliverable 2). The approach and resolution in an Excel file of those mass and energy balances that, along with other equations and the handling of specific graphs, are necessary to calculate the yield of the whole process and the flow rate and composition of each one of the intermediate streams were also assessed (deliverable 3). After that, students were asked to record a screencast regarding the decision-making and calculations to face the challenge. These screencasts were displayed against a panel of other expert lecturers who gave them some recommendations and evaluated the oral presentation following a rubric. To favour a much more objective evaluation, another rubric was employed to evaluate deliverables 1 to 3. In the opinion of the students, which was collected through a questionnaire at the end of the challenge-based learning experience, it allowed the students to develop both the specific skills of each one of the two subjects and the soft ones, specifically those related to collaborative work, problem solving, time control and oral communication., The authors thank UPV for the financul support given with the project PIME/20-21/208 entitled: "Aprendizaje basado en retos: una contribución a la adquisición significativa de competencias profesionales (transversales y específicas) del ámbito agroalimentario y biotecnológico".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Obstructive Sleep Apnea Detection Methods Based on Heart Rate Variability Analysis: Opportunities for a Future Cinc Challenge

  • Padovano, Daniele
  • Martinez-Rodrigo, Arturo
  • Pastor, Jose M.
  • Alcaraz, Raul
  • Rieta, J J|||0000-0002-3364-6380
[EN] The effects of sleep-related disorders, such as obstructive sleep apnea (OSA), can be devastating either in children or adults. Misdiagnosis may lead to severe cardiovascular diseases. Besides, OSA consequences are often related to bad job performance, and road accidents. Nowadays, polysomnography (PSG) is still considered the gold standard for OSA diagnosis, but the required facilities are extremely high, thus reducing availability worldwide. For this reason, simpler and cost-effective diagnosing methods have been proposed in the late years. In this regard, the heart rate variability (HRV) has been demonstrated to strongly reflect apnea episodes during sleep. Hence, this work reviews the latest advances in the evaluation of OSA from the HRV perspective to consider its potentialities for a future revisited CinC Challenge., This research has been supported by grants DPI201783952-C3 from MINECO/AEI/FEDER EU, SBPLY/17/180501/000411 from Junta de Comunidades de Castilla-la Mancha and AICO/2019/036 from Generalitat Valenciana. Moreover, Daniele Padovano has held graduate research scholarships from Escuela Polit ' ecnica de Cuenca and Instituto de Tecnolog ' ias Audiovisuales, University of CastillaLa Mancha
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Real-time functionalization and biosensing in subwavelength grating bimodal waveguides

  • Torrijos-Morán, Luis
  • Martinez-Perez, Paula
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] In this paper, we present for the first time experimental results of biosensing processes by using subwavelength grating bimodal waveguides as a refractive index sensors. We demonstrate the detection of 10ppm concentration of Bovine Serum Albumin (BSA) with a 190pm wavelength shift after a functionalization of the sensor surface with a layer of protein A/G in a continuous flowing system. Real-time data of each step is obtained, validating these kind of novel and highly sensitive SWG sensors for biosensing purposes., The authors acknowledge the funding from the Generalitat Valencia through project AVANTI/2019/123 and grant ACIF/2019/009.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Strategies for the protection, conservation and dissemination of traditional architecture: the case of Formentera (Balearic Islands, Spain)

  • Mileto, Camilla|||0000-0002-6987-8802
  • Hueto-Escobar, Alicia|||0000-0003-4628-6545
  • Manzano-Fernández, Sergio|||0000-0001-7936-1324
  • Vegas López-Manzanares, Fernando|||0000-0003-0315-6839
[EN] Traditional architecture faces a series of risks of a very diverse nature, scope and origin, such as cultural homogenisation, industrialisation, the imposition of industrial techniques and materials, changes in lifestyles, the rural exodus, the pressure of tourism, the absence of specific regulations and the lack of appreciation. These risks require diverse actions that integrate research, multidisciplinary collaboration, community inclusion, sustainability, dissemination, normative regulation, compatibility between use, current standards and traditional architectural values, etc. The main objective of this text is to analyse various actions with different scales and scopes developed on the island of Formentera (Balearic Islands, Spain), as examples of a transversal vision and strategy focused on the protection, conservation and dissemination of its traditional architecture. On the one hand, as a result of the National Plan for Cultural Landscape and the National Plan for Traditional Architecture, a management plan model has been developed which establishes principles, criteria and strategies to make the protection of traditional architecture compatible with the impact of tourism and the resulting intervention dynamics. These principles have materialised specifically in the restoration projects of two traditional dwellings, specifically Can Ramon and Sa Senieta. On the other hand, the choice of the island and its traditional architecture as a research object within the European project Versus+ Heritage for People has made it possible to develop different dissemination actions such as exhibitions, workshops and conferences that have brought together researchers, teachers, students, artists, craftsmen, craftswomen and craftswomen from all over the world. From the global scale to the individual action, all these actions aim to highlight the importance of researching, documenting and disseminating the values of traditional architecture, identifying existing risks and, in particular, demonstrating the capacity of such architecture to be restored and inhabited today., This document is part of the research project “VerSus+ / Heritage for People” (Ref. 607593-CREA-1-2019-1-ES-CULTCOOP1) funded by the European Union and the research project “RE-HABITAT – Restauración y rehabilitación sostenible de viviendas tradicionales en contextos históricos” funded by Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital - Generalitat Valenciana (Ref. CIAICO/2022/035).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Biocompatible Low-Cost Antennas Over Flexible Substrates for IoT-Health Applications

  • Castelló-Palacios, Sergio|||0000-0003-4689-652X
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Vila Jiménez, Antonio|||0000-0003-3730-3083
  • Vallés Lluch, Ana|||0000-0002-7896-8666
  • Cardona Marcet, Narciso|||0000-0001-5697-1453
  • Garcia-Pardo, Concepcion|||0000-0002-2774-980X
[EN] This paper presents a 10 GHz wearable antenna specifically designed for IoT-Health applications. Their main distinguishing features are its biocompatibility and flexibility, which are acquired by designing custom-made materials. Four custommade materials were designed and manufactured in order to compare the performance of the antenna according to the selected substrate. The study assesses the impact of these materials on critical parameters such as bandwidth, efficiency, and radiation patterns. This work includes both the simulations of the antenna behaviour based on the dielectric properties of the materials, and also the experimental results from the real measurements performed on manufactured antennas. Results contribute to the ongoing evolution of materials in antenna design, opening new possibilities for the advancement of communication solutions in healthcare applications., This research has been funded by Huawei Technologies at the iTEAMHuawei Joint Innovation Center. This work has also been funded by Ramon¿ y Cajal fellowship RYC2021-033207-I, by EMERGE-5G project PID2020- 115005RJ-I00 and by HEROE-6G CNS2023-143570 project, all funded by Agencia Estatal de Investigacion MCIN/AEI/10.13039/501100011033 and by ¿ European Union NextGenerationEU/PRTR. It has also been supported by Generalitat Valenciana under project MAOCOM-6G (MFA/2022/056).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

On the Use of Mobile Sensors for Estimating City-Wide Pollution Levels

  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Ducourthial, Bertrand
Obtaining detailed pollution maps for urban environments is an effort that is gathering much interest by allowing to better regulate traffic and protect citizens from hazardous conditions. However, the scarcity of pollution sensors prevents obtaining the desired degree of detail, requiring alternative solutions to be deployed. In this paper we explore the concept of mobile pollution sensing by studying the feasibility of equipping buses with ozone measurement hardware to estimate ozone patterns for the city of Compiègne. Overall, we achieve accurate estimations, with error values typically ranging from 2% to 10%. Compared to solutions based on deploying static sensors on the different bus stops available, we find that the proposed mobile sensing approach is able to provide a degree of accuracy comparable to deploying tens of static sensors, substantially reducing costs and management., This work was carried out and funded in the framework of the Labex MSZT. It was supported by the French Government, through the program "Investments for the future” managed by the National Agency for Research (Reference ANR-11-IDEX-0004-02). This work was partially funded by the Celtic Plus CoMoSeF project "Cooperative mobility for the services of the future". The authors thank the Agglomération de la Région de Compiégne (ARC).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Fusibles estructurales para evitar la propagación de fallos en las cimbras de edificación

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Moragues, Juan J|||0000-0001-8111-5480
  • Oliver-Cano, Marina
  • Adam, Jose M|||0000-0002-9205-8458
[ES] La construcción de edificios con estructura de hormigón armado se realiza, habitualmente, con la ayuda de puntales metálicos que se encargan de transmitir las cargas de las plantas recién hormigonadas a las inferiores. Los principales problemas que presenta el empleo de puntales son: a) la aparición de cargas superiores a las previstas en los puntales, pudiendo provocar el colapso de toda la cimbra o incluso del edificio, b) la heterogeneidad de las cargas que reciben los puntales de una misma planta cimbrada, y c) la limitada variedad de puntales de que disponen las casas comerciales. Todo ello obliga a que, en la mayor parte de las ocasiones, los puntales empleados en las obras estén claramente sobredimensionados. En este artículo se presenta el fusible estructural para el control de la carga de los puntales (también llamado limitador de carga o LL por sus siglas en inglés), que fue desarrollado en ICITECH a partir de estudios teóricos avanzados, una intensa campaña experimental y la ejecución de una prueba de concepto. El artículo se compone de: 1) una breve recopilación de los trabajos experimentales y de validación computacional llevados a cabo; y 2) el estudio realizado con simulación numérica avanzada para evaluar y cuantificar la posible mitigación del daño y el riesgo de fallo de estructuras de edificios durante su construcción. De los resultados obtenidos se puede afirmar que con el uso de LLs se consigue una mejora: de la seguridad, frente a fallos locales de la cimbra cuyas consecuencias podrían propagarse de forma desproporcionada; de la eficiencia estructural, con una mayor uniformidad en las cargas que reciben los puntales; y de los costes del sistema de apuntalamiento., Los autores quieren expresar su gratitud a todas las entidades por la financiación recibida (FPU13/02466; PRX17/00302; GV/2015/063; APOSTD/2019/101; 101000396; IJC2020- 042642-I), así como a las empresas Encofrado J. Alsina S.A. y Levantina, Ingeniería y Construcción S.L. por su invalorable cooperación.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Computational simulations of the effects of the V17M missense mutation on atrial electrical activity

  • Belletti, Rebecca
  • Martínez Mateu, L.
  • Romero Pérez, Lucia|||0000-0003-4605-8630
  • Saiz Rodríguez, Francisco Javier|||0000-0002-9850-0825
[EN] Atrial fibrillation is a cardiac arrhythmia responsible for disorganized electrical activity of the upper chambers of the heart. Recently genetic mutations have been associated to episodes of atrial fibrillation in asymptomatic patients, a condition called Lone AF. Indeed, genetic defects in ion channel protein structures can alter the flowing of the current through the pore. The aim of this work is to model and simulate the gain of function missense mutation V17M affecting the accessory subunit KCNE3 of the rapid delayed rectifier potassium channel, Kv11.1, found in a 46-years-old man affected by Lone AF. To accomplish this, the ventricular IKr Markov model proposed by Martin Fink and colleagues has been refitted to reproduce the behavior of the atrial IKr using an optimization procedure. Then, it was introduced into the atrial cellular model developed by Courtemanche Ramirez Nattel (CRN). Additionally, this model has been adjusted to fit experiments in literature in order to accurately reproduce the effects of the V17M mutation. The resulting wild-type IKr formulation mimics the CRN IKr time course at 0.5, 1 and 2 Hz, the activation time constants and the steady-state activation and inactivation curves. In addition, the V17M mutation formulation reproduces the experimentally reported electrophysiological alterations, which are approximately 3-fold increment of the current at high voltages and an almost 2-fold prolongation of the deactivation time constant. Simulation of the V17M mutation at the cellular level showed a 300% increase of the IKr peak, which shortened the action potential duration in 118.30 ms., Generalitat Valenciana, Prometeo programme 2016/088 and grant agreement 766082 European Union's Horizon 2020
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Adhesive assisted fabrication of chirped POF Bragg grating

  • Min, Rui
  • Pereira, Luis
  • Paixao, Tiago
  • Woyessa, Getinet
  • André, Paulo
  • Bang, Ole
  • Frizera, Anselmo
  • Antunes, Paulo
  • Pinto, Joao
  • Li, Zhaohui
  • Marques, Carlos
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] FBG in polymer optical fibers (POFs) is a promising technology for a wide range of sensing applications due to a lower Young¿s modulus and a large range of applying strain. Furthermore, POFs have several properties which make them attractive for biosensing applications such as nonbrittle nature, flexibility in bending and biocompatibility. Chirped Fiber Bragg gratings (CFBGs), which are characterized by a nonuniform modulation of the refractive index show a broad reflection spectrum, enabling shortlength distributed sensing. The combining benefits of POF and CFBGs is attractive for biomedical applications. Here, we present a novel method to obtain CFBG in POF with a postprocess uniform POF FBG by using resin., The Spanish Ministerio de Ciencia, Innovación y Universidades RTI2018­101658­B­I00 FOCAL Project; National Natural Science Foundation of China (61435006, 61525502); The Science and Technology Planning Project of Guangdong Province (2017B010123005, 2018B010114002); Local Innovation and Research Teams Project of Guangdong Pearl River Talents Program (2017BT01X121). This work was developed within the scope of the project i3N, UIDB/50025/2020 & UIDP/50025/2020, financed by national funds through the FCT/MEC. Luís Pereira and Tiago Paixão acknowledge FCT for the grants SFRH/BD/146295/2019 and PD/BD/128265/2016, respectively. This work is also funded by national funds (OE), through FCT¿I.P., in the scope of the framework contract foreseen in the numbers 4, 5 and 6 of the article 23, of the Decree­Law 57/2016, of August 29, changed by Law 57/2017, of July 19.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

ICFHR2016 Handwritten Keyword Spotting Competition (H-KWS 2016)

  • Pratikakis, Ioannis
  • Zagoris, Konstantinos
  • Gatos, Basilis
  • Puigcerver, Joan
  • Toselli, Alejandro Héctor|||0000-0001-6955-9249
  • Vidal, Enrique|||0000-0003-4579-5196
[EN] The H-KWS 2016, organized in the context of the ICFHR 2016 conference aims at setting up an evaluation framework for benchmarking handwritten keyword spotting (KWS) examining both the Query by Example (QbE) and the Query by String (QbS) approaches. Both KWS approaches were hosted into two different tracks, which in turn were split into two distinct challenges, namely, a segmentation-based and a segmentation-free to accommodate different perspectives adopted by researchers in the KWS field. In addition, the competition aims to evaluate the submitted training-based methods under different amounts of training data. Four participants submitted at least one solution to one of the challenges, according to the capabilities and/or restrictions of their systems. The data used in the competition consisted of historical German and English documents with their own characteristics and complexities. This paper presents the details of the competition, including the data, evaluation metrics and results of the best run of each participating methods., This work was partially supported by the Spanish MEC under FPU grant FPU13/06281, by the Generalitat Valenciana under the Prometeo/2009/014 project grant ALMA-MATER, and through the EU projects: HIMANIS (JPICH programme, Spanish grant Ref. PCIN-2015-068) and READ (Horizon-2020 programme, grant Ref. 674943).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Desarrollo de videojuegos mediante equipos multidisciplinares

  • Mollá, Ramón|||0000-0003-0704-9336
  • Abad Cerdá, Francisco José|||0000-0001-5896-8645
Este trabajo ha sido financiado por el Vicerrectorado de Estudios, Calidad y Acreditación de la Universitat Politècnica de València, a través de la Convocatoria A+D. Proyectos de Innovación y Mejora Educativa (PIME 19-20/167).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Compilation Techniques for Spin Qubits in a Shuttling Bus Architecture

  • Escofet, Pau
  • Semenov, Andrii
  • Murphy, Niall
  • Blokhina, Elena
  • Abadal, Sergi
  • Alarcon, Eduard
  • GARCIA ALMUDEVER, CARMEN|||0000-0002-3800-2357
[EN] In this work, we explore and propose several quantum circuit mapping strategies to optimize qubit shuttling in scalable quantum computing architectures based on silicon spin qubits. Our goal is to minimize phase errors introduced during shuttling operations while reducing the overall execution time of quantum circuits. We propose and evaluate five mapping algorithms using benchmarks from quantum algorithms. The Swap Return strategy emerged as the most robust solution, offering a superior balance between execution time and error minimization by considering future qubit interactions. Additionally, we assess the importance of initial qubit placement, demonstrating that an informed placement strategy can significantly enhance the performance of dynamic mapping approaches., This work was supported by the European Commission (QUADRATURE: HORIZON-EIC-2022-PATHFINDEROPEN-01-101099697, WINC: HORIZON-ERC-2021-101042080), the Spanish Ministry of Science, Innovation and Universities (Beatriz Galindo program 2020, BG20-00023) and European ERDF (PID2021-123627OB-C5, QCOMM-CAT-Planes Complementarios), funding from MICIN and NextGenerationEU (PRTR-C17.I1), Generalitat de Catalunya, the ICREA Academia Award 2024, Science Foundation Ireland under Grant 21/RP-2TF/10019, and the predoctoral FPI-UPC grant supported by UPC and Banco Santander.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Simulación del experimento A3.1 en la instalación experimental ATLAS

  • Sanchez Saez, Francisco|||0000-0002-3011-9884
  • Carlos Alberola, Sofía|||0000-0002-0637-325X
  • Villanueva López, José Felipe|||0000-0002-7684-6884
  • Martorell Alsina, Sebastián Salvador|||0000-0003-1706-4740
[ES] El trabajo que se presenta en esta ponencia forma parte del estudio que se está llevando a cabo en la UPV fruto del acuerdo específico de colaboración con el Consejo de Seguridad Nuclear (CSN) para la participación en los proyectos CAMP de USNRC, y PKL3 y ATLAS de NEA/OECD, y su aplicación a plantas españolas (CAMP-España). Se ha simulado el transitorio A 3.1 mediante el código termohidráulico Best Estimate TRACE en la instalación experimental ATLAS, que es una versión escalada de una central APR1400. El transitorio consiste en una pérdida total de agua de alimentación con fallos adicionales. En concreto, se produce el fallo parcial de la apertura de la PORV (al 50%) y el fallo parcial de las bombas de inyección de seguridad. La progresión del transitorio consiste en que tras la pérdida del agua de alimentación se produce el secado de los generadores de vapor y posteriormente se produce el disparo de turbina y del reactor. Después del disparo de turbina, la presión del secundario crece hasta que es aliviada mediante las MSIV. Después, debido al secado de los generadores de vapor, la presión en el primario crece, hasta que es aliviada por la PORV del presionador. Una vez que se alcanza el punto de apertura de las PORV, de acuerdo con los procedimientos de emergencia del APR 1400, el operador debe realizar un feed and bleed, el cual se consigue manteniendo las PORV abiertas y con la inyección de seguridad. Por último, cuando la presión del primario decae del punto de tarado de los acumuladores, estos descargan parte de su inventario al primario y al cabo de un tiempo se alcanzan las condiciones de parada fría. Los principales eventos del transitorio se reproducen adecuadamente con TRACE.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

El COVID-19, la normativa de ventilación y su impacto ambiental en las universidades en México

  • Valencia-Salazar, Iván|||0000-0002-5223-4218
  • Peñalvo-López, Elisa|||0000-0002-3143-822X
  • Montañana-Romeu, Joaquín|||0000-0003-3331-9205
  • León-Martínez, Vicente|||0000-0002-1906-371X
[EN] This paper analyses the increase in energy consumption caused by COVID-19 containment measures in university classrooms in Mexico, particularly in hot humid areas where the use of air conditioning units is required. The effect of ventilation on classroom temperature, student comfort and air conditioning equipment consumption are analysed., Queremos agradecer a GENERALITAT VALENCIANA y a la Comisión Europea su apoyo en el marco del proyecto DECAB (NÚMERO de subvención GV/2021/149) y del proyecto H2020, SMEmPower (GA 847132).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

How does the use of digital platforms impact on students marks at high education?

  • Esteso, Ana|||0000-0003-0379-8786
  • Alarcón Valero, Faustino|||0000-0002-0783-3932
  • Prats-Montalbán, José Manuel|||0000-0001-6294-4486
  • Rodríguez-Sánchez, María De Los Ángeles
[EN] More and more universities use educational digital platforms to support teaching. Due to the covid-19 crisis, and with the online teaching approval, the usage of digital platforms in universities has gone from being an option to a necessity. Therefore, efforts have been made to promote the use of existing platforms in each university. This has required teachers not only to make an effort to transform and adapt in record time all the presential teaching to virtual teaching, but also has required professors to learn how to use some of the features of existing digital platforms that were not familiar to them. However, did using this type of platforms positively impact on high education students marks? This study aims to determine if such impact existed in engineering schools. More concretely, this paper focus on engineering students from different grades and levels from the Universitat Politècnica de València in Spain, and on the use of the PoliformaT digital platform, which is an adaptation of Sakai platform for the mentioned university. Statistics data provided by PoliformaT about the number of visits, number of events with the platform, and downloaded documents per student for several subjects from the School of Industrial Engineering and the School of Informatics for the course 2019-2020 are analysed. Multiple linear regression models on marks obtained by students and their activity on PoliformaT platform have been built to determine if the usage of digital platforms has any relation with the students¿ marks. A varied casuistry is observed in the results. Relations of the analysed items with marks have been identified in some of the analysed subjects, still these relations being moderate. In this sense, some unconsidered factors might be influencing these relations, being appropriate to analyse them in future research. On the other hand, it is necessary to re-analyse this same scenario in future courses when both, students and professors, have enough usage level of the employed teaching tools. Next course we expect that some of the deficiencies identified in this first study will be reduced after both actors become familiar to these digital tools., This work has been developed within the framework of the projects Coordinación metodológica a través de webs de apoyo en títulos ETSII para diferentes Competencias Trasversales of the call for Educational Innovation and Improvement Projects (PIME) with code PIME/19-20 Ref. 150, Ref. 151 and Ref. 152, in its institutional modality, promoted by the Vice-Rectorate for Studies, Quality and Accreditation and the Institute of Education Sciences of the Universitat Politècnica de València. The second author was supported by the Generalitat Valenciana (Conselleria de Educación, Investigación, Cultura y Deporte) under Grant ACIF/2019/021.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Using Diffusion Models for Data Augmentation on Limited Rodent OCT Datasets

  • García-Torres, Fernando|||0000-0002-5337-8774
  • del Amor, Rocío
  • Morales, Sandra|||0000-0003-0763-1545
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
  • Barroso, Álvaro
  • Kemper, Björn
  • Schnekenburger, Jürgen
[EN] Optical coherence tomography (OCT) has transformed ophthalmology by enabling accurate diagnosis of retinal diseases. OCT in rodents is used in research studies of ophthalmic diseases and treatment evaluation. However, the scarcity of data limits the effectiveness of deep learning models for this purpose. This study explores the use of synthetic data generation to improve deep learning models for OCT image analysis from rodent retinas. To address this, the research leverages advanced class-conditional generative models to create high-quality synthetic images of ex-vivo rodent retinas embedded in two different mediums (solid resin and liquid media) with a reduced initial database. The conditional Denoising Diffusion Probabilistic Model (DDPM) proved to be the best model, as it produces more realistic images that closely mimic the characteristics of real rodent retinal scans. By augmenting the training datasets with these synthetic images, the performance of deep learning models in segmenting retinal layers improved by 7%. This approach reduces reliance on scarce biological samples and animal testing, promoting ethical research practices while improving the accuracy and efficiency of AI-driven medical diagnostics. The integration of synthetic data generation represents a significant advance in medical imaging, offering a scalable solution to data scarcity, generating reliable samples in two mediums and promoting the development of more robust and accurate diagnostic tools., This work has received funding from Horizon Europe, the European Union s Framework Programme for Research and Innovation, under Grant Agreement No. 101070062 (SEQUOIA). Generalitat Valenciana partially funded this work through project CIPROM/2022/20. The work of Sandra Morales has been cofunded by the Universitat Polit`ecnica de Val`encia, Spain through the program PAID10-20. The work of Rocio del Amor has been supported by the Spanish Ministry of Universities under an FPU Grant (FPU20/05263).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Thread-to-Core Allocation in ARM Processors Buildings Synergistic Pairs

  • Navarro-Edo, Marta|||0000-0002-4334-460X
  • Feliu-Pérez, Josué|||0000-0003-3017-4266
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[EN] Simultaneous multithreading (SMT) processors can present significant throughput improvements over singlethreaded (ST) processors thanks to sharing internal core resources among instructions executing from multiple threads. However, resource sharing introduces inter-thread interference within the core, which negatively impacts individual application performance and can significantly increase the turnaround time of multi-program workloads. The severity of the intra-core interference on performance depends on the applications corunning in the same core. A thread scheduler can help reduce this effect by smartly selecting the pairs of applications that should run on each SMT core. This paper presents SYNPA, a simple approach that dynamically allocates threads to SMT cores based on their run-time dynamic behavior. SYNPA uses a regression model to select synergistic pairs to mitigate intra-core interference. Results show that SYNPA outperforms the default Linux scheduler by around 35%, on average, in terms of turnaround time when running 8- application workloads combining frontend-bound and backendbound applications., This work has been supported by the Spanish Ministerio de Ciencia e Innovacion and European ERDF under grant PID2021-123627OB-C51, TED2021-130233B-C32, and Generalitat Valenciana under grant AICO/2021/266. Marta Navarro is supported by Subvenciones para la contratacion de personal investigador predoctoral by CIACIF/2021/413 . Josue Feliu is supported by the RYC2021-030862-I contract, funded by the MCIN/AEI /10.13039/501100011033 and the European Union NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Setting up of a radon measurement system from an exhalation simulation device, Puesta a punto de un sistema de medida de radón a partir de un dispositivo de simulación de exhalación

  • Noverques-Medina, Aina|||0000-0002-7810-0381
  • Juste-Vidal, Belen-Jeanne|||0000-0003-1978-3765
  • Sancho, M.|||0000-0002-9566-1949
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
  • Arnal Arnal, José Miguel
  • García-Fayos, Beatriz|||0000-0002-7941-4243
[EN] Radon is a radioactive gas from the uranium decay which is being considered as a carcinogenic element by the World Health Organization (WHO) since 2010. In 2013, it was published the Directive 59/2013/EURATOM which establishes new radon limit values, more restrictive, and action plans against radon in air. Since then, and due to the great concern about radon hazardous, several research centers, as well as laboratories and collaborating entities, are joining their efforts in order to develop different methodologies and protocols that allow the control and mitigation of radon gas, with the aim of reducing its concentration in air, and thus preserving population health. Within this context, this works performs the setting up of a RadonScout detector (SARAD GmbH), portable equipment that lets to know in situ and continuously the concentration of radon in air in any location. Measurements have been taken with experimental equipment designed to keep constant environmental conditions. To check the repeatability of the measurements, the results have been compared with RAD7 (Durridge) detector which has been previously used in several intercomparison and calibration procedures., [ES] El radón es un gas radiactivo procedente de la desintegración del uranio, considerado como un elemento cancerígeno por la Organización Mundial de la Salud (OMS) desde 2010. En 2013, se publicó la Directiva 59/2013/EURATOM que establecía unos nuevos valores límite, más restrictivos, y planes de acción frente al radón en aire. Desde entonces, y dada la gran preocupación por la peligrosidad de este gas, diversos centros de investigación, así como laboratorios y entidades colaboradoras, aúnan sus esfuerzos para disponer de metodologías y protocolos que permitan el control y la mitigación del gas radón, con el fin de disminuir su concentración en el aire, y así preservar la salud de la población. Dentro de este contexto, en este trabajo se realiza la puesta a punto del detector RadonScout (SARAD GmbH), un equipo portátil que permite conocer in situ y en continuo la concentración de radón en aire en cualquier emplazamiento. Las medidas se han llevado a cabo a partir de un equipo experimental diseñado para mantener las diferentes variables ambientales estables. Para comprobar la repetibilidad de las medidas, los resultados han sido comparados con los del detector RAD7 (Durridge), con el que se ha participado en diferentes intercomparaciones y calibraciones., Este trabajo ha sido financiado por el Proyecto Prometeo/2018/035 de la Generalitat Valenciana
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Observation Decoding with Sensor Models: Recognition Tasks via Classical Planning

  • Aineto, Diego
  • Jiménez-Celorrio, Sergio|||0000-0003-0561-4880
  • Onaindia De La Rivaherrera, Eva|||0000-0001-6931-8293
[EN] Observation decoding aims at discovering the underlyingstate trajectory of an acting agent from a sequence of observa-tions. This task is at the core of various recognition activitiesthat exploit planning as resolution method but there is a gen-eral lack of formal approaches that reason about the partialinformation received by the observer or leverage the distri-bution of the observations emitted by the sensors. In this pa-per, we formalize the observation decoding task exploiting aprobabilistic sensor model to build more accurate hypothesisabout the behaviour of the acting agent. Our proposal extendsthe expressiveness of former recognition approaches by ac-cepting observation sequences where one observation of thesequence can represent the reading of more than one variable,thus enabling observations over actions and partially observ-able states simultaneously. We formulate the probability dis-tribution of the observations perceived when the agent per-forms an action or visits a state as a classical cost planningtask that is solved with an optimal planner. The experimentswill show that exploiting a sensor model increases the accu-racy of predicting the agent behaviour in four different con-texts, This work is supported by the Spanish MINECO project TIN2017-88476-C2-1-R. D. Aineto is partially supported by the FPU16/03184 and S. Jimenez by the RYC15/18009
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

An Adaptive LoRa-Based Edge Architecture for Data Sensing and Collection in Natural Parks

  • Cecilia-Canales, José María|||0000-0001-5648-214X
  • Arratia-Uribe, Benjamín Andrés|||0000-0001-7869-053X
  • Rosas-Olivos, Erika Susana
  • Martín Furones, Ángel Esteban|||0000-0001-9379-0694
  • Perles, Angel|||0000-0002-5782-4284
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] This article introduces the design of a flexible IoT/Edge architecture to overcome the challenges of deploying advanced sensors in remote settings such as natural parks. These environments demand reliable communication and considerable computational resources to manage the extensive real-time data from IoT devices like sensors and cameras. Our approach combines two LoRa-based protocols to efficiently handle large data blocks and ensure long-range communication, conserving energy and maintaining data integrity crucial for integrating sophisticated sensors with conventional IoT devices. The architecture offers edge computing within a containerbased gateway, simplifying on-site data processing and minimizing data traffic complexities. The MQTT protocol supports interoperability among distributed services, enhancing adaptability and efficiency in processing data locally or via cloud services like digital twins. We demonstrate this system¿s effectiveness through two case studies in natural parks: visitor counting using Time of Flight technology and water level measurement with GNSS data. These cases highlight the system¿s ability to handle frequent small and less frequent large data transmissions efficiently, This work has been supported by the MCSA-SE REMARKABLE grant ID: 101086387; Research project CIPROM/2023/29, funded by Direccio General de Ciencia ` i Investigacio Generalitat Valenciana - SPAIN; EU s Horizon ¿ 2020 research and innovation program No 101017861, by project Ramon y Cajal Grant RYC2018-025580-I, funded by ¿ MCIN/AEI/ 10.13039/501100011033 and ESF Investing in your future, GVA GRISOLIAP/2021/103 and Grant TED2021- 130890B funded by MCIN/AEI and by EU NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Análisis de la variabilidad temporal de la onda P para predecir el resultado de la ablación por catéter en fibrilación auricular paroxística

  • Ruiz Moreno, A.
  • Arias Palomares, M.A.
  • Puchol Calderón, A.
  • Pachón Iglesias, M.I.
  • Alcaraz Martínez, R.
  • Rieta, J J|||0000-0002-3364-6380
[EN] El aislamiento de las venas pulmonares es el principal tratamiento de la fibrilacion auricular (FA) paroxistica. Sin embargo, presenta una alta tasa de recurrencia y el desarrollo de predictores no invasivos de esta cuestion, es esencial para permitir un tratamiento mas personalizado de cada paciente. Para tal proposito, se han analizado varias caracteristicas de la onda P a partir de registros de electrocardiografia (ECG), pero, aun no se ha estudiado su variabilidad a lo largo del tiempo. Por tanto, este trabajo explora la capacidad de la variabilidad temporal de la duracion y la amplitud de la onda P, para anticipar el fallo de la crioablacion. Paea este estudio antes de la ablacion, se registro un ECG de 5 minutos en 45 pacientes con FA paroxistica. Las ondas P en la derivacion II se delinearon con un algoritmo automatico y se calcularon la duracion y amplitud de todas ellas. A continuacion, se obtuvieron la media, la desviacion estandar y el coeficiente de variacion (CV) para ambos parametros y se correlacionaron con el resultado de la ablacion despues del seguimiento de 9 meses. El CV para ambas caracteristicas de las ondas P presento la capacidad predictiva mas alta de la recurrencia de la FA. Ademas, obtuvo mejoras de alrededor del 10 % en la clasificacion con respecto a la media, alcanzando valores del 70 %. Estos resultados sugieren que la variabilidad temporal de la onda puede proporcionar nueva informacion sobre la heterogeneidad de la conduccion auricular, lo cual podria ser util para mejorar la estrategia de seleccion de candidatos para ser sometidos a crioablacion., Esta investigacion ha sido apoyada por los fondos DPI2017-83952-C3 de MINECO/AEI /FEDER EU,SBPLY/17/180501/000411 de la Junta de Comunidades de Castilla-la Mancha y AICO/2019/036 de la Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

On-Line Optimization of Dual-Fuel Combustion Operation by Extremum Seeking Techniques

  • Pla Moreno, Benjamín|||0000-0001-9238-2939
  • Bares-Moreno, Pau|||0000-0001-9672-0819
  • Barbier, Alvin Richard Sebastien|||0000-0002-3563-8624
  • Guardiola, Carlos|||0000-0002-3150-8566
[EN] Dual-fuel combustion engines have shown the potential to extend the operating range of Homogeneous Charge Compression Ignition (HCCI) by using several combustion modes, e.g. Reactivity Controlled Compression Ignition (RCCI) at low/medium load, and Partially Premixed Compression (PPC) at high load. In order to optimize the combustion mode operation, the respective sensitivity to the control inputs must be addressed. To this end, in this work the extremum seeking algorithm has been investigated. By definition, this technique allows to detect the control input authority over the system by perturbing its value by a known periodic signal. By analyzing the system response and calculating its gradient, the control input can be adjusted to reach optimal operation. This method has been applied to a dual-fuel engine under fully, highly and partially premixed conditions where the feedback information was provided by in-cylinder pressure and NOx sensors. The gasoline fraction and the injection timing were selected as control inputs and an extremum seeking controller was designed and verified to optimize brake efficiency by tracking the ideal combustion phasing and to reduce NOx emissions as well., The authors would like to recognize the financial support through Alvin Barbier's grant ACIF/2018/141, Programa Operativo del Fondo Social Europeo (FSE) de la Comunitat Valenciana 2014-2020. The authors also wish to thank Gabriel Alcantarilla for his assistance during the experimental campaign.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Aplicabilidad de modelos teóricos de propagación para entorno urbano en la estimación de las pérdidas a 3.5 GHz en plantaciones de cítricos

  • Juan-Llácer, Leandro
  • Párraga Riquelme, David
  • Martínez-Inglés, María Teresa
  • Molina García-Pardo, José María
  • Rodríguez, José Víctor
  • Pascual-García, Juan
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] Agriculture 4.0 represents a considerable increase in the number of sensors, as well as the appearance of new wireless technologies, which will mean the need to efficiently planning radio communication systems in agricultural environments. In this work, the applicability of the WalfischBertoni and the Ikegami propagation models that have been used to estimate propagation losses in urban environments, has been studied in citrus plantations. The similarities and differences of the profiles between the transmitter and the receiver, have been analyzed to identify the dominant propagation mechanisms in each case: buildings, in urban environments, and trees, in citrus plantations, assuming that the height of the transmitter is above the height of the trees and the height of the receiver below them. The propagation losses estimated by the models have been compared with the measurements carried out at the 3.5GHz frequency (one of the 5G bands) in a lemon plantation after the fruit was collected. Under these conditions, it has been observed how the slope of the regression line of the measurements has a value of 2.7, far from that obtained by the Walfisch-Bertoni model and closer to the one estimated by the Ikegami model. Furthermore, when analyzing the error between the theoretical and the measured losses, a standard deviation of 6.39dB is observed for the Walfisch-Bertoni model and 4.91dB for the Ikegami model., Este trabajo ha sido financiado por la Comunidad Autónoma de la Región de Murcia a través del proyecto 20804/PI/18 de la convocatoria de Ayudas a proyectos para el desarrollo de investigación científica y técnica por grupos competitivos, incluida en el Programa Regional de Fomento de la Investigación (Plan de Actuación 2019) de la Fundación Séneca, Agencia de Ciencia y Tecnología de la Región de Murcia y por el Ministerio de Economía y Competitividad MINECO, Spain (TEC2016-78028-C3-2-P).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Tests on a Full-Scale Precast Building for Robustness Assessment

  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Adam, Jose M|||0000-0002-9205-8458
[EN] As modern society faces unprecedented challenges related to climate stability and conflict, the need to design more sustainable and resilient buildings is undeniable. Several studies show that building with precast concrete components can result in significant advantages with respect to sustainability. However, the fact that such structures exhibit clear lines of weakness at the joints between elements can make them more vulnerable to progressive collapse. Although this can be overcome by adequate detailing of connections, there exist several uncertain factors which may affect the interaction between different precast elements and the global behaviour of such structural systems. This means that experimental testing is usually required for safe development of adequate solutions. Despite this fact, there have been very few studies on the robustness of precast concrete structures when compared to research on cast-in-place and steel structures. As such, this work presents the results of an ambitious experimental campaign involving the sudden removal of 3 different columns from a specifically built 15 m x 12 m two-storey precast concrete building incorporating simple and practical solutions to enhance robustness., This article is part of a project (Endure) that has received funding from the European Research Council (ERC) under the European Union¿s Horizon 2020 research and innovation programme (Grant agreement No. 101000396). The authors would like to acknowledge the funding received through grant BIA2017-88322-R-AR funded by MCIN/AEI/ 10.13039/501100011033 and ¿ERDF A way of making Europe¿. The authors would also like to express their gratitude for funding received under the postdoctoral programs of Generalitat Valenciana/European Social Fund [APOSTD/2019/101] and grant IJC2020-042642-I funded by MCIN/AEI/ 10.13039/501100011033 and by ¿European Union NextGenerationEU/PRTR¿. The help and support provided by Ayman El-Fouly (Applied Science International) for performing simulations in ELS is also gratefully acknowledged. Finally, the authors are also grateful for the invaluable cooperation of the Levantina, Ingeniería y Construcción S.L. (LIC) company, and the contribution of members and collaborators of the Building Resilient research group.