Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 68
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Multimodal documentation methods at Villa of Brutus, Tivoli: Towards a new understanding of otium villas

  • Algaba Torrealba, Juan José
  • Abate, Antonio
  • Moreno-Navarro, Fernando
  • García Sánchez, Jesús
  • Moreno-Navarro, Fernando|||/items/5faabbe8-7b5b-4cf6-a109-80d1e71ed1c7
The otium villas (luxurious aristocratic residences) in Latium and Tibur (Tivoli, Italy), exemplified by Hadrian’s Villa, reflect elite power and monumentality. Traditionally examined in terms of their architecture and imperial associations, their origins are closely connected with the development of terraced sanctuaries and with processes of senatorial competition, giving rise to a phenomenon that proved decisive in the later Roman Republic. This research proposes a comprehensive digital methodology applied to the Villa of Brutus, integrating architectural analysis, GPR, laser scanning, photogrammetry, and GIS, applied for the first time in one of these Tibur villas. This methodology has been developed and implemented in the southern sector of the villas. Moreover, the application of a comprehensive set of methods to a large and complex site, properly informed by theoretical approaches, has provided valuable insights into its construction phases. A phase predating the villa with the presence of Republican aqueduct, the Anio Vetus (272 BC), a second phase with the construction of a Late Republican basis villae (original construction), so far documented in an area of 997 square meters (sq. m.); and a third phase (dated in 1st-2nd cent. AD) in which the original villa plan was covered with massive terraces supported by substructions. The latter complex extends over 15,000 sq. m, of which 7,500 sq. m have been studied. The results are presented in this paper.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Exploring the synergistic effect of palladium nanoparticles and highly dispersed transition metals on carbon nitride/super-activated carbon composites for boosting electrocatalytic activity

  • Alemany Molina, Gabriel
  • Navlani-García, Miriam
  • Juan Juan, Jerónimo
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
In the present work, multifunctional electrocatalysts formed by palladium nanoparticles (Pd NPs) loaded on Fe or Cu-containing composite supports, based on carbon nitride (C3N4) and super-activated carbon with a high porosity development (SBET 3180 m2/g, VDR 1.57 cm3/g, and VT 1.65 cm3/g), were synthesised. The presence of Fe or Cu sites favoured the formation of Pd NPs with small average particle size and a very narrow size distribution, which agreed with Density Functional Theory (DFT) calculations showing that the interaction of Pd clusters with C3N4 flakes is weaker than with Cu- or Fe-C3N4 sites. The electroactivity was also dependent on the composition and, as suggested by preliminary DFT calculations, the Pd-Cu catalyst showed lower overpotential for hydrogen evolution reaction (HER) while bifunctional oxygen reduction reaction/ oxygen evolution reaction (ORR/OER) behaviour was superior in Pd-Fe sample. The Pd-Fe electrocatalyst was studied in a zinc-air battery (ZAB) for 10 h, showing a performance similar to a commercial Pt/C + RuO2 catalyst with a high content of precious metal. This study demonstrates the synergistic effect between Pd species and transition metals and shows that transition metals anchored on C3N4-based composite materials promote the electroactivity of Pd NPs in HER, ORR and OER due to the interaction between both species.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Understanding the acute and chronic effects of basketball dual-task complexity on athletes’ inhibitory capacity

  • Gutiérrez-Capote, Alejandro
  • Jiménez-Martínez, Jesús
  • Alarcón, Francisco
  • Leicht, Anthony
  • Torre, Elisa
  • López-Morales, Jose J.
  • Madinabeitia, Iker
  • Cárdenas, David
  • Alarcón, Francisco|||/items/c9b90a86-f5c9-47b2-86ac-474876c3d050
  • Madinabeitia, Iker|||/items/700b2328-8459-463c-9f8e-6926d09cd8d3
Inhibitory control (IC) enables athletes to suppress inappropriate responses and shift attention during sport practice. However, how acute training effects on IC relate to chronic adaptations remains unclear. This study investigated whether cognitive-motor complexity during interventions fosters long-term adaptations and how IC capacity moderates outcomes. One hundred twenty-five healthy athletes (68 men, 57 women; mean age, 21.1 ± 1.8 years) were divided into high- and low-IC capacity groups and assigned to one of four basketball cognitive motor dual-task interventions, varying in executive demands and physical load. A repeated-measures design assessed the effects of 11 training sessions on IC and whether the effects remained after three months. High-capacity groups showed improved IC accuracy and response time in each session (p < 0.001), followed by low-capacity groups, initially under low executive demands (p < 0.001) and then high executive demands (p < 0.001). At three months, performance generally declined (p < 0.001), except in the high-capacity group under high-demand conditions, where it was maintained. Notably, the negative performance peak during interventions correlated with final IC assessment (p = 0.002). Cognitively demanding training enhanced IC in athletes with a higher baseline capacity, while less complex tasks were more effective for individuals with lower capacity. These findings support adapting task complexity to cognitive level to optimise cognitive development.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

El paternalismo industrial durante el desarrollismo franquista: una forma más de control sobre los trabajadores, Industrial Paternalism on Francoist Development: a Tool of Control over Workers

  • Latorre Manglano, Diego
Las décadas de los sesenta y los setenta en España fueron una época de modernización social, política y cultural. Esto ha llevado a algunos autores a decretar la muerte del paternalismo industrial. Sin embargo, con este artículo se pretende demostrar la pervivencia de formas de control paternalistas en las industrias desarrollistas. Analizo así tanto estas políticas empresariales como sus objetivos, implicaciones y significados –elementos fundamentales para poder definirlos como prestaciones paternalistas–. Estos servicios tenían el objetivo de evitar la salida y aumentar la fidelidad de los trabajadores con una intención productivista. Además, se revistieron de significados identitarios que pretendían construir lazos de pertenencia verticales sobre una comunidad empresarial en oposición a la solidaridad horizontal de clase. En definitiva, considero que las políticas paternalistas industriales se mantuvieron durante los años del desarrollismo con una clara función disciplinaria. Para ello me centro fundamentalmente en el análisis de las actas de los Jurados de Empresa y documentos de la oposición sindical disponibles en el Archivo de Historia del Trabajo de Madrid y el Arxiu Històric de CCOO de Catalunya de Barcelona.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Postural health education in schools: teachers' perspectives on well-being, inequities, and institutional constraints

  • García-Luna, Marco A.
  • Cunha, António Camilo
  • Manchado, Carmen
  • Cortell-Tormo, Juan M.
  • Manchado, Carmen|||/items/9a974087-234d-4708-95e7-76e6fa160bbb
  • Cortell-Tormo, Juan M.|||/items/f9051cc6-3cbe-4a9d-83d7-7a7d027b93dc
Purpose. Postural health remains an underexamined dimension of school-based health education, despite its relevance for students’ wellbeing and long-term musculoskeletal health. This study explores how Physical Education teachers conceptualise and implement postural health education, and which factors shape its enactment. Methods. A qualitative descriptive–interpretive design was adopted. Semi-structured interviews were conducted with 30 Physical Education teachers from primary and secondary schools in Spain. Data were audio-recorded, transcribed verbatim, and analysed using reflexive thematic analysis within a constructivist framework. Results. Five interrelated themes captured a tension between teachers’ strong valuation of postural health and its marginal curricular status. These themes reflected (i) its recognised but limited curricular integration; (ii) fragmented conceptualisations and uneven pedagogical content knowledge; (iii) predominantly sporadic and unstructured implementation; (iv) insufficiently practice-oriented training; and (v) a strong demand for practical and institutional support. Conceptualisations ranged from hygiene-oriented approaches to more integrative understandings linked to motor control and physical literacy. Implementation was shaped by limited training, scarce resources, and low institutional prioritisation. Conclusions. Findings reveal a gap between the perceived importance of postural health and the structures supporting its implementation. Addressing this gap requires context-sensitive approaches that strengthen pedagogical support and curricular alignment.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Quick spreading of the exotic amphipod Laticorophium baconi (Shoemaker, 1934): another small stowaway overlooked?

  • Guerra-García, José Manuel
  • Revanales, Triana
  • Saenz-Arias, Pablo
  • Navarro-Barranco, Carlos
  • Ruiz-Velasco, Sofía
  • Pastor-Montero, María
  • Sempere-Valverde, Juan
  • Chebaane, Sahar
  • Vélez-Ruiz, Alberto
  • Martinez-Laiz, Gemma
  • Santos-Simón, Mar
  • Ferrario, Jasmine
  • Marchini, Agnese
  • Nour, Ola Mohamed
  • Gouillieux, Benoit
  • Hosie, Andrew Mark
  • Gerovasileiou, Vasilis
  • Carvalho, Susana
  • Balistreri, Paolo
  • Sirchia, Benedetto
  • Ruvolo, Vincenzo
  • Mancini, Emanuele
  • Bonifazi, Andrea
  • Tempesti, Jonathan
  • Tiralongo, Francesco
  • Ignoto, Sara
  • Fernandez-Gonzalez, Victoria
  • Vázquez-Luis, Maite
  • Cabezas, María del Pilar
  • Ros, Macarena
  • Fernandez-Gonzalez, Victoria|||/items/e320fc42-d0a8-4a8f-a334-1cafcd791727
Studies of non-indigenous species (NIS) often tend to focus on medium and large-sized taxa with potential for remarkable ecological and/or economic impact, whereas the early detection of small invertebrates is often delayed due to taxonomic challenge, lack of consistent, standardised monitoring efforts and limited funding. This study represents the first records of the marine amphipod Laticorophium baconi (Shoemaker, 1934) in Morocco, Tunisia, Corsica (France), Italy, Greece, Egypt, Saudi Arabia and New Caledonia (France). Furthermore, it reports an expansion of its known distribution in Portugal (earliest and northernmost record for the country and first record for Macaronesia), Spain (earliest record for Atlantic and Mediterranean European waters), and Australia (first record for Indian Ocean). Recreational boating and commercial shipping, mainly through hull fouling and secondarily ballast waters, are proposed as vectors for introduction and secondary spread of L. baconi. The following traits, analysed during the present study, could contribute to its invasive potential: (i) quick and extensive spread of the species worldwide, (ii) high densities in marinas, harbours, hull fouling and other artificial habitats, including aquaculture facilities and floating debris, (iii) high ability for short-term colonisation of empty artificial niches, (iv) diet based on detritus suggesting an opportunistic feeding behaviour, and (v) population survival during seasonal fluctuations in different regions. Taxonomic expertise and scientific collaboration, based on multidisciplinary networks of experts, are crucial for the early detection, distribution updates, and risk assessment of small and overlooked stowaways in marine environments.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Effect of two larval diets on the reproductive parameters of the housefly, Musca domestica L. (Diptera, Muscidae)

  • Abellán, Mónica
  • Ruano, Francisca
  • Rojo, Santos
  • Martínez-Sánchez, Anabel
  • Martínez-Sánchez, Anabel|||/items/079f1589-d46b-402a-98e0-5a6c3c384764
  • Rojo, Santos|||/items/c7357652-73a8-4c86-b3a2-43509e304566
  • Abellán, Mónica|||/items/3bf11f73-e9f0-461a-b88b-63f6add4a11b
Deep understanding of the optimal reproductive and biological parameters is necessary to obtain the maximum egg production in captive rearing of Musca domestica, the common housefly. The effect of larval diet is explored in this study, using two different media: poultry manure and an artificial medium based on cereals mixed with meat. The preimaginal mortality and development time, with other reproductive parameters that indirectly affect adult fecundity as: ovary and wing size, fluctuating asymmetry, and cuticular hydrocarbon composition, were analysed. The results show that poultry manure was related with better efficacy values, lower larval mortality rate, and a sex-dependent effect in fecundity. Asymmetry fluctuation and different hydrocarbon composition was detected in females. The females from larvae that grew on manure presented bigger ovaries and oocytes, but a smaller number of ovarioles per ovary. Their morphological asymmetry was also lower; and the cuticular hydrocarbon composition was distinct from the rest of the adults, with more alkanes and less alkenes than males or females related with the artificial diet. As conclusion, the effect of larval substrate on the survival and fecundity parameters is evident. The implications for the mass production of the house fly as animal feed are also indicated.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Estimation of uniaxial compressive strength and intrinsic permeability from ultrasounds in sedimentary stones used as heritage building materials

  • Benavente, David
  • Martínez Martínez, Javier
  • Galiana-Merino, Juan José
  • Pla, Concepción
  • Jongh, Marli de
  • García-Martínez, Noé
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
  • Galiana-Merino, Juan José|||/items/2aeffb6f-7a89-465b-a756-a9ca8b74bb42
  • García-Martínez, Noé|||/items/35ea3f49-d77a-4740-8ca5-5bb024c9170c
  • Pla, Concepción|||/items/f9ff3ff5-c55e-4c85-83c1-f71fff810219
This paper combines ultrasonic parameters recorded from P- and S- waves and effective porosity to estimate uniaxial compressive strength, σC, and intrinsic permeability, k - two of the most crucial physical parameters used in stone conservation studies. The ultrasonic parameters have been chosen because they are sensitive to the microstructural properties of stones which influence both σC and k differently. Velocities of compressional or primary, Vp, and shear or secondary, Vs, elastic waves are related to porosity and the mineralogical composition; the waveform attenuation is related to the presence of vuggy macropores and pore and particle size; and the wavelength is related to the pore and particle size. Fifteen types of stones used in the Spanish built heritage were measured including calcarenites, sandstones, dolostones and travertines. Several simple and multiple predictive expressions for σC and k are fitted, which are quantified through the Pearson correlation coefficient, R. Curve fitting improves as the number of petrophysical parameters taken into account in the multiple linear regressions increases. The obtained Pearson's correlations values for σC are slightly higher than for k. The best correlation for σC (R = 0.921) and k (R = 0.903) is found when the predictive equation incorporates all of the elastic wave parameters obtained non-destructively, and the connected porosity. In general, effective porosity is statistically the most significant variable of the fitted regressions. The σC and k estimation from all the ultrasonic parameters, without considering connected porosity, shows a good correlation (R = 0.852 and 0.864, respectively). The addition of Vs to multiple regressions does not significantly improve the goodness of the fit. Consequently, the measurement of Vs is unnecessary as it is difficult and time-consuming. Finally, results also show that vuggy porosity (present in travertines) influences waveform attenuation and σC and k differently, relative to other microstructural properties; limiting the techniques use for stones with this type of porosity. Estimating σC and k using ultrasonic parameters exclusively is advantageous as the estimations can be obtained non-destructively using portable equipment, while also providing an acceptable goodness of fit.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Transparency as a Means to Analyse the Impact of Inertial Sensors on Users during the Occupational Ergonomic Assessment: A Systematic Review

  • García-Luna, Marco A.
  • Ruiz-Fernandez, Daniel
  • Tortosa-Martínez, Juan
  • Manchado, Carmen
  • García-Jaén, Miguel
  • Cortell-Tormo, Juan M.
  • Cortell-Tormo, Juan M.|||/items/f9051cc6-3cbe-4a9d-83d7-7a7d027b93dc
  • García-Jaén, Miguel|||/items/2fc828ff-d9f9-4fd7-a556-e65b3bce013d
  • García-Luna, Marco A.|||/items/17d9d02a-b8c2-4e23-9ca2-8946403e3d99
  • Manchado, Carmen|||/items/9a974087-234d-4708-95e7-76e6fa160bbb
  • Ruiz-Fernandez, Daniel|||/items/d64525ae-cea8-47fd-9b9f-6ae44b45e41e
  • Tortosa-Martínez, Juan|||/items/cbed90a3-0472-480a-9964-c4b355d569f3
The literature has yielded promising data over the past decade regarding the use of inertial sensors for the analysis of occupational ergonomics. However, despite their significant advantages (e.g., portability, lightness, low cost, etc.), their widespread implementation in the actual workplace has not yet been realized, possibly due to their discomfort or potential alteration of the worker’s behaviour. This systematic review has two main objectives: (i) to synthesize and evaluate studies that have employed inertial sensors in ergonomic analysis based on the RULA method; and (ii) to propose an evaluation system for the transparency of this technology to the user as a potential factor that could influence the behaviour and/or movements of the worker. A search was conducted on the Web of Science and Scopus databases. The studies were summarized and categorized based on the type of industry, objective, type and number of sensors used, body parts analysed, combination (or not) with other technologies, real or controlled environment, and transparency. A total of 17 studies were included in this review. The Xsens MVN system was the most widely used in this review, and the majority of studies were classified with a moderate level of transparency. It is noteworthy, however, that there is a limited and worrisome number of studies conducted in uncontrolled real environments.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Study the Effect of Relative Energy Deficiency on Physiological and Physical Variables in Professional Women Athletes: A Randomized Controlled Trial

  • Miralles-Amorós, Laura
  • Asencio Mas, Nuria Isabel
  • Martínez-Olcina, María
  • Vicente-Martínez, Manuel
  • García de Frutos, José M.
  • Peñaranda-Moraga, Marcelo
  • Gonzálvez-Alvarado, Lucía
  • Yáñez-Sepúlveda, Rodrigo
  • Cortés-Roco, Guillermo
  • Martinez-Rodriguez, Alejandro
  • Asencio Mas, Nuria Isabel|||/items/f306520b-b708-4c98-ac11-c38787f281a5
  • Martinez-Rodriguez, Alejandro|||/items/f9886914-11b2-41d7-8a5f-4e2581c3655d
  • Martínez-Olcina, María|||/items/3e3b654a-5de3-497b-bd36-c08ef4dac3dd
  • Peñaranda-Moraga, Marcelo|||/items/a59be58a-2660-4937-b26b-84b2cbe54ae1
Energy deficits are often observed in athletes, especially in female athletes, due to the high expenditure of sport and strict diets. Low energy availability can cause serious health problems and affect sport performance. The aim of this study was to evaluate the effects of different personalized dietary plans on physiological and physical factors related to energy deficit syndrome in female professional handball players. Twenty-one professional female handball players, aged 22 ± 4 years, 172.0 ± 5.4 cm and 68.4 ± 6.7 kg, divided into three groups (FD: free diet; MD: Mediterranean diet; and AD: high antioxidant diet), participated in this 12-week randomized controlled trial. Energy expenditure through indirect calorimetry, energy availability, 7 day dietary intake analysis, blood pressure, cholesterol, menstrual function, body composition by both anthropometry and bioelectrical impedance, and strength performance were assessed. All participants showed low energy availability (< 30 kcal/lean mass per day); despite this, all had eumenorrhea. Significant improvements were found after the intervention in all components of body composition (p <0.05). In the remaining variables, despite slight improvements, none were significant neither over time nor between the different groups. Low energy availability has been observed in all professional female handball players, which may lead to serious consequences. A longer period of intervention is required to assess the differences between diets and improvements in other parameters.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Athletes with a history of non-contact ACL injury exhibit poorer inhibitory control and visual attention performance than healthy athletes

  • Jiménez-Martínez, Jesús
  • Alarcón, Francisco
  • Madinabeitia, Iker
  • Gutiérrez-Capote, Alejandro
  • Cárdenas, David
  • Alarcón, Francisco|||/items/c9b90a86-f5c9-47b2-86ac-474876c3d050
  • Madinabeitia, Iker|||/items/700b2328-8459-463c-9f8e-6926d09cd8d3
Anterior cruciate ligament (ACL) injuries significantly impact athletes’ performance, and a neurocognitive approach, particularly executive functions, may play a relevant role in ACL injury. The aim was to evaluate and compare performance on inhibitory control and visual attention using the Flanker Task and Multiple Object Tracking (MOT) cognitive tests between athletes with and without a history of non-contact ACL injury. 60 athletes of interaction sports (30 athletes with no history of ACL injury and 30 athletes with a history of non-contact ACL injury) participated in this study. During the experimental session participants performed Flanker Task and Multiple Object Tracking to evaluate inhibitory control and visual attention, respectively. Athletes with a history of non-contact ACL injury had longer reaction times than healthy athletes on the Flanker Task cognitive test (p < 0.001). For the MOT, athletes with a history of non-contact ACL injury had worse two-ball follow-through at speeds of 19.9 deg/s (p = 0.034) and 28.8 deg/s (p < 0.001) and three-ball follow-through at speeds of 19.9 deg/s (p = 0.009) and 28.8 deg/s (p < 0.001). Athletes with a history of non-contact ACL injury exhibit poorer cognitive performance than athletes without a history of ACL injury in inhibitory control, particularly interference control and visual attention. Therefore, rehabilitators and exercise professionals should consider the assessment and training of executive functions into the rehabilitation process for ACL injuries.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enhancing creativity and digital skills in motion: TikTok in higher education

  • Huertas González-Serrano, María
  • López Carril, Samuel
  • Jiménez Jiménez, Pablo
  • Molina García, Nuria
  • Molina García, Nuria|||/items/c7781ed8-8436-448c-a43c-c16e76c0e0c9
In a rapidly evolving digital society, higher education must equip students with essential twenty-first century skills such as creativity and digital literacy. This study explored the educational potential of TikTok through an active learning experience implemented in a “Foundations of Body Expression” course within a sport sciences degree program. A quantitative, quasi-experimental pre-test/post-test design, complemented by a qualitative descriptive component based on students’ responses to one open-ended question was used to investigate the perceptions of 156 university students regarding TikTok’s impact on their creativity, digital skills, and overall learning engagement. Quantitative findings showed statistically significant improvements in all variables, with self-perceived creativity displaying the greatest perceived growth. The qualitative analysis identified five thematic areas: (1) learning and creativity, (2) psychological and social benefits, (3) teaching methods and tools, (4) promotion and digital skills, and (5) critical considerations and warnings. Students described TikTok as an engaging, accessible, and motivating tool that promoted creative expression, active participation, and digital skills development. They particularly valued its integration of music, rhythm, and visual effects, which enhanced their ability to communicate and express through movement. Some students also noted potential risks such as distraction or misalignment with academic objectives. Overall, the findings support TikTok’s potential to enrich university teaching when framed within a student-centred, pedagogically sound approach.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Persistent cognitive deficits in ACL-injured athletes despite of rehabilitation: an observational longitudinal study

  • Jiménez-Martínez, Jesús
  • Alarcón, Francisco
  • Chirosa Ríos, Luis Javier
  • Gutiérrez-Capote, Alejandro
  • Cárdenas, David
  • Alarcón, Francisco|||/items/c9b90a86-f5c9-47b2-86ac-474876c3d050
Background: Rehabilitation programs following an anterior cruciate ligament (ACL) injury tend to focus on improving conditional aspects such as biomechanics. Recently, some studies have analyzed the relationship between cognition and ACL injury, but how cognitive performance evolves throughout the rehabilitation process has not yet been explored. This study assessed how cognitive performance evolves at three points in the ACL injury recovery process: preoperatively, postoperatively, and at the end of the rehabilitation process. It also aims to compare cognitive performance at the end of the rehabilitation process with athletes without a history of ACL injury. Methods: 30 open-skill sports athletes who had recently sustained an ACL injury and 30 open-skill sports athletes with no history of ACL injury were recruited. For the group of ACL-injured athletes, three experimental sessions were conducted at three different points in the ACL injury recovery process. For the control group a single experimental session was conducted. During the experimental sessions participants performed Flanker Task and Multiple Object Tracking to evaluate their cognitive performance. Results: For both Flanker and MOT task, ACL injury athletes show better cognitive performance postoperatively compared to the preoperative phase. For example, a higher mean reaction time in the Flanker task (BF₁₀ = 4.14) and lower accuracy in 3-ball tracking at 28.8 deg/s (BF₁₀ = 2.45). Nevertheless, no improvement was observed between the postoperative and follow-up phases. Finally, ACL injury athletes did not reach a cognitive performance comparable to healthy athletes, for example on mean reaction time in the Flanker Task (BF₁₀ = 60.64) and the 3-ball tracking at speeds of 19.9 and 28.8 deg/s (BF₁₀ = 16.30, BF₁₀ = 12.12, respectively). Conclusions: ACL injury athletes show improvements in cognitive performance post-surgery, but it stabilizes at the end of the rehabilitation and remains lower than that of athletes who did not suffer an ACL injury. Therefore, ACL rehabilitation programs fail to improve cognitive performance, increasing the risk of suffering a new ACL injury compared to those without a history of ACL injury.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Pt nanoparticles for improving the performance and durability of Fe-N-C based materials towards oxygen reduction reaction in alkaline direct methanol fuel cells

  • Alemany Molina, Gabriel
  • Lo Vecchio, Carmelo
  • Baglio, Vincenzo
  • Aricò, Antonino Salvatore
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Pt-alloy nanoparticles have been reported to enhance the oxygen reduction reaction (ORR) durability and boost Pt methanol tolerance. In this work, we have studied two different Pt-Fe-N-C based materials, where one of the carbon materials is derived from a biomass residue (almond shell), prepared by standard impregnation and NaBH4 reduction or one-pot high-temperature treatment. The materials were characterized in terms of methanol tolerance, accelerated durability tests, power density in membrane electrode assembly (MEA) configuration, and stability (100 h). The results showed that, although the particle size distribution obtained for the one-pot synthesis was wider, an effective modification of the Pt structure was observed, which was translated into a higher methanol tolerance. When a small amount of platinum was incorporated in the biomass-derived Fe-N-C catalysts, and tested for the first time (to the best of our knowledge) in alkaline direct methanol fuel cell (ADMFC), significant improvement in durability under ORR conditions was achieved, which finally resulted in superior performance in MEA configuration.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Straightforward Synthesis Methodology for Obtaining Excellent ORR Electrocatalysts From Biomass Residues Through a One Pot-High Temperature Treatment Approach

  • Alemany Molina, Gabriel
  • Pabón-Román, Keila Melissa
  • Chinchilla, Lidia Esther
  • Calvino, Jose J.
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Pabón-Román, Keila Melissa|||/items/72dcae70-f639-4cf0-8a8f-ba0e2310eefb
Materials prepared from biomass residues are potential candidates to substitute the Pt-based commercial electrocatalysts in oxygen reduction reaction (ORR). Although some investigations have reported activity and durability comparable to Pt/C using biomass-derived catalysts based on Fe─N─C sites, it remains a challenge to decrease the environmental impact of the production of these materials. A straightforward procedure is developed to obtain excellentORR electrocatalysts from biomass residues which requires a single high-temperature treatment. The final washing step is avoided by optimizing the initial amount of Fe precursor (FeC2O4). Besides the formation of iron oxide nanoparticles, a highly dispersed Fe phase is detected by High Angle Annular Dark Field Scanning Transmission Electron Microscopy and Energy Dispersive X-Ray Spectroscopy (HAADF-STEM-XEDS) analysis as well as graphitic carbon structures. The best performance for almond shell-based electrocatalysts is achieved for the sample containing 4.6 wt. % of Fe. The procedure developed is also applied to oceanic posidonia and eucalyptus residues, also showing excellent ORR behavior. The best sample is studied in a primary Zn-air battery (ZAB) obtaining a maximum power density of 59 mW cm−2 and 755 mAh gZn−1 capacity.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Overview of DIPROMATS 2023: automatic detection and characterization of propaganda techniques in messages from diplomats and authorities of world powers, Overview de DIPROMATS 2023: detección y caracterización automáticas de técnicas de propaganda en mensajes de diplomáticos y autoridades de potencias mundiales

  • Moral, Pablo
  • Marco Remón, Guillermo
  • Gonzalo Arroyo, Julio
  • Carrillo-de-Albornoz, Jorge
  • Gonzalo-Verdugo, Iván
This paper presents the results of the DIPROMATS 2023 challenge, a shared task included at the Iberian Languages Evaluation Forum (IberLEF). DIPROMATS 2023 provides a dataset with 12012 annotated tweets in English and 9501 tweets in Spanish, posted by authorities of China, Russia, United States and the European Union. Three tasks are proposed for each language. The first one aims to distinguish if a tweet has propaganda techniques or not. The second task seeks to classify the tweet into four clusters of propaganda techniques, whereas the third one offers a fine-grained categorization of 15 techniques. For the three tasks we have received a total of 34 runs from 9 different teams.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Co-complexes on modified graphite surface for steady green hydrogen production from water at neutral pH

  • Toledo-Carrillo, Esteban A.
  • García-Rodríguez, Mario
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Ye, Fei
  • Kundi, Varun
  • Kumar, Priyank V.
  • Verho, Oscar
  • Dutta, Joydeep
  • Åkermark, Bjorn
  • Das, Biswanath
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Green hydrogen production from water is one attractive route to non-fossil fuel and a potential source of clean energy. Hydrogen is not only a zero-carbon energy source but can also be utilized as an efficient storage of electrical energy generated through various other sources, such as wind and solar. Cost-effective and environmentally benign direct hydrogen production through neutral water (∼pH 7) reduction is particularly challenging due to the low concentration of protons. There is currently a major need for easy-to-prepare, robust, as well as active electrode materials. Herein we report three new molecular electrodes that were prepared by anchoring commercially available, and environmentally benign cobalt-containing electrocatalysts with three different ligand frameworks (porphyrin, phthalocyanine, and corrin) on a structurally modified graphite foil surface. Under the studied reaction conditions (over 7 h at 22°C), the electrode with Co-porphyrin is the most efficient for the water reduction with starting ∼740 mV onset potential (OP) (vs. RHE, current density 2.5 mA/cm2) and a Tafel slope (TS) of 103 mV/dec. It is followed by the molecular electrodes having Co-phthalocyanine [825 mV (OP), 138 mV/dec (TS)] and Vitamin-B12 (Co-corrin moiety) [830 mV (OP), 194 mv/dec (TS)]. A clear time-dependent improvement (>200 mV over 3 h) in the H2 production overpotential with the Co-porphyrin-containing cathode was observed. This is attributed to the activation due to water coordination to the Co-center. A long-term chronopotentiometric stability test shows a steady production of hydrogen from all three cathode surfaces throughout seven hours, confirmed using an H2 needle sensor. At a current density of 10 mA/cm2, the Co-porphyrin-containing electrode showed a TOF value of 0.45 s−1 at 870 mV vs. RHE, whereas the Co-phthalocyanine and Vitamin-B12-containing electrodes showed 0.37 and 0.4 s−1 at 1.22 V and 1.15 V (vs. RHE), respectively.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Study of Different Personalised Dietary Plans on Eating Behaviour, Body Image and Mood in Young Female Professional Handball Players: A Randomised Controlled Trial

  • Miralles-Amorós, Laura
  • Vicente-Martínez, Manuel
  • Martínez-Olcina, María
  • Asencio Mas, Nuria Isabel
  • Gonzálvez-Alvarado, Lucía
  • Peñaranda-Moraga, Marcelo
  • Leyva-Vela, Belén
  • Yáñez-Sepúlveda, Rodrigo
  • Cortés-Roco, Guillermo
  • Martinez-Rodriguez, Alejandro
  • Asencio Mas, Nuria Isabel|||/items/f306520b-b708-4c98-ac11-c38787f281a5
  • Martinez-Rodriguez, Alejandro|||/items/f9886914-11b2-41d7-8a5f-4e2581c3655d
  • Martínez-Olcina, María|||/items/3e3b654a-5de3-497b-bd36-c08ef4dac3dd
  • Peñaranda-Moraga, Marcelo|||/items/a59be58a-2660-4937-b26b-84b2cbe54ae1
Low energy availability may precede or be caused by cognitive disturbances in professional athletes. Related psychological problems include disordered eating patterns, body shape preoccupation, depression or anxiety. The objective of this research was to evaluate the effects of different personalised dietary plans on psychological factors in young professional female handball players with low energy availability. This 12-week randomised clinical trial involved 21 female players aged 22 ± 4 years, 172.0 ± 5.4 cm and 68.4 ± 6.7 kg divided into three groups (FD: free diet; MD: Mediterranean diet; HAD: high antioxidant diet). Eating behaviour (Eating Attitude Test, EAT-26: diet, bulimia and oral control subscales), body image (Body Shape Questionnaire, BSQ) and mood state (Profile of Mode State, POMS: tension, vigour, anger, depression, fatigue) were assessed. All participants showed low energy availability (<30 kcal/lean mass per day). The different plans showed no significant differences between them but significant differences over time within groups for the variables: body image, Tension, Vigour and Depression (p < 0.05). Eating behaviour improved slightly but did not show statistically significant changes. Following an adequate nutritional planning for athletes seems to improve the mood and body perception of young female handball players. A longer intervention period is required to assess the differences between diets and improvement of other parameters.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

A drone-based prototype technique for monitoring soil degassing at active volcanic craters

  • Girona, Társilo
  • Williams, Jason
  • Copple, James
  • Westhoff, Matthew
  • Drymoni, Kyriaki
  • García-Martínez, Noé
  • Benavente, David
  • Bacon, Conor A.
  • de Moor, J. Maarten
  • Lev, Einat
  • García-Martínez, Noé|||/items/35ea3f49-d77a-4740-8ca5-5bb024c9170c
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
Developing techniques to monitor volcanic activity from safe distances is crucial for advancing scientific knowledge while protecting the safety of field personnel. One of the most demanding tasks in this context is the measurement of soil gas emissions, which offer valuable insights into fluid migration through the shallow crust and act as an early indicator of volcanic unrest and potential eruptive activity. Traditional soil degassing measurements commonly require two operators to be physically present with the instrument, sometimes exposing them to hazardous conditions. In this study, we present a new method for performing soil degassing measurements from a safe distance, using a customized Remotely Piloted Aircraft System (RPAS). This drone-based approach was designed to carry out accumulation chamber measurements in hazardous or otherwise inaccessible areas. We tested the system at four locations around the active crater of Poás Volcano in Costa Rica, where we collected data on CO2 and H2O fluxes, along with soil temperature and moisture. Our results reveal spatial variability in gas emissions and surface conditions across the study sites. A site located on the crater rim (Site 1) showed the highest CO2 and H2O fluxes, indicating active gas release possibly associated with structural features. A second site, located within the crater (Site 2), exhibited elevated H2O flux without detectable CO2, suggesting localized processes related to moisture transport. Our experiment on another crater site (Site 3) produced a complete and high-quality dataset, demonstrating the operational success of the method. In contrast, measurements at the last crater site (Site 4) were affected by chamber sealing issues and potentially by the influence of volcanic gas plumes. While the experiment faced several challenges, including imperfect ground-sensor contact as well as occasional telemetry interruptions, it successfully demonstrated the feasibility of using drones for soil degassing surveys. Based on these findings, we identify specific areas for improvement and propose future directions to enhance the system reliability and performance. Overall, this method offers a promising tool for extending soil gas measurements to hazardous or hard-to-reach environments, contributing to safer and more comprehensive monitoring of active volcanic systems.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Environmental pressure and sensory uncertainty modulate free-throw performance: psychological, neurophysiological, and kinematic evidence

  • Cruz, Diego Andrés
  • Gutiérrez-Capote, Alejandro
  • Jiménez-Martínez, Jesús
  • López-Morales, Jose J.
  • Martínez-Muñumer, Iván
  • Torre, Elisa
  • Alarcón, Francisco
  • Cárdenas, David
  • Alarcón, Francisco|||/items/c9b90a86-f5c9-47b2-86ac-474876c3d050
Performance under competitive pressure depends on emotional and attentional regulation. This study examined how environmental pressure and sensory uncertainty influence perceived anxiety, probability of failure (POF), cost of failure (COF), and free-throw performance in basketball. Furthermore, shooting kinematics and prefrontal hemodynamics (estimated by prefrontal oxygenated haemoglobin concentration (OxyHb) were assessed to determine how these stressors modulate biomechanical and neurophysiological responses. Twenty-four federated basketball players (U14–U18) completed a 2 × 2 within-subject protocol (high/low pressure × sensory occlusion), performing 100 free throws per condition. In the meantime, anxiety, POF, COF, were registered every five shots, and performance was quantified at shot level. Linear mixed-effects models revealed that both stressors significantly increased anxiety, POF and COF (p < 0.001). POF and COF each independently predicted higher anxiety, which in turn negatively predicted free-throw performance. A mediation analysis confirmed that anxiety partially mediated the effect of POF on performance and fully mediated the effect of COF. Performance was lowest under combined stressors (36.46%) compared to no-occlusion conditions (~ 61%). Additionally, prior performance predicted subsequent performance, and anxiety independently reduced shooting accuracy when added to the model (p < 0.001). At the neurophysiological level, both pressure and occlusion elicited greater prefrontal oxygenation and altered joint kinematics. These results suggest that environmental pressure and sensory uncertainty may modulate psychological appraisals, neurophysiological responses, and movement kinematics offering a potential explanation for the observed decrement in free-throw performance. Therefore, simulating competitive pressure could improve emotional regulation and performance.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Culture wars, perception gap and affective polarization: an approach from the Spanish case, Batallas culturales, brecha perceptiva y polarización afectiva: una aproximación desde el caso español

  • Rojo Martínez, José Miguel
  • Crespo Martínez, Ismael
  • Mora Rodríguez, Alberto
Previous research has shown the existence of strong relationships between affective polarization and culture wars, but it is unknown to what extent this emotional division is, in fact, a ‘false polarization’ generated from second-order beliefs in those identity issues that categorize and define group membership. Using data from the ‘First National Survey of Political Polarization’ in Spain, an operationalization of the concept of ‘perception gap’ is proposed and an individual measurement of it through a formula that adapts the coefficient of Average Deviation (Dx̄), defined as the arithmetic mean of the absolute values of the deviations from the mean. This seeks to describe the ‘perception gap’ in Spain around two relevant culture wars in the discursive articulation of the ideological blocs: gender violence and national symbols. In the same way, the relationship between the partisan affiliation of the voters and the levels of perceptive gap is analyzed. In this regard, it is shown that, in those matters that are claimed as a symbolic property of an ideological bloc, the supporters of this bloc have a higher level of ‘perception gap’, that is, they tend to exaggerate their differences with the outgroup distorting the real positions of the adversaries. When the thematic battle redirects to a position of moral superiority of the group and becomes a key issue for intergroup differentiation, the homogeneity of the positions of its members is more accentuated and a greater perceptual deviation bias is also produced.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Cognitive Control After ACL Reconstruction: A Cross-Sectional Study on Impaired Proactive Inhibition Compared to Healthy Controls

  • Jiménez-Martínez, Jesús
  • Gutiérrez-Capote, Alejandro
  • Madinabeitia, Iker
  • Cárdenas, David
  • Alarcón, Francisco
  • Alarcón, Francisco|||/items/c9b90a86-f5c9-47b2-86ac-474876c3d050
  • Madinabeitia, Iker|||/items/700b2328-8459-463c-9f8e-6926d09cd8d3
Background/Objectives: Anterior cruciate ligament (ACL) injury is common in interaction sports and has severe physical and psychological consequences. Recent research suggests that neurocognitive factors, such as proactive inhibitory control, may influence injury risk. The present work compares the proactive inhibitory performance ability of athletes with no ACL injury and ACL-rehabilitated athletes (ACLR). Methods: This study involved 60 athletes from interaction sports (30 with no history of ACL injury and 30 ACL rehabilitated athletes). During the experimental session, participants performed an executive go–no-go task to assess proactive inhibitory control. Results: The ACLR group exhibited higher adjusted-precision response times (p = 0.011), higher inhibitory failures response times (p < 0.001), poorer accuracy (p = 0.003), and higher commission error rate (p = 0.026) than the group of athletes with no history of ACL injury. Conclusions: Athletes rehabilitated from an ACL injury show inferior performance in proactive inhibitory control, evidenced by lower accuracy and higher reaction times than athletes without a history of injury. Consequently, physiotherapists and exercise professionals should consider cognition during ACL injury rehabilitation and physical retraining before returning to sporting activity.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

The spread of Aoroides longimerus Ren & Zheng, 1996 across the Mediterranean and the Atlantic: genetic diversity, anthropogenic transport, and ecological implications

  • Guerra-García, José Manuel
  • Desiderato, Andrea
  • Mucciolo, Serena
  • Navarro-Barranco, Carlos
  • Ros, Macarena
  • Ferrario, Jasmine
  • Moretti, Paula
  • Marchini, Agnese
  • Mosbahi, Nawfel
  • Ruiz-Velasco, Sofía
  • Gestoso, Ignacio
  • Ramalhosa, Patrício
  • Canning-Clode, João
  • Olabarria, Celia
  • Cacabelos, Eva
  • Troncoso, Jesus S.
  • Pézy, Jean-Philippe
  • Raoux, Aurore
  • Dauvin, Jean-Claude
  • Charbonnelle, Mathilde
  • Schlicklin, Ferdinand
  • Ariyama, Hiroyuki
  • Mancini, Emanuele
  • Bonifazi, Andrea
  • Le Garrec, Vincent
  • Burel, Thomas
  • Gouillieux, Benoit
  • Espírito Santo, Cristina
  • Chainho, Paula
  • Ribeiro, Romeu S.
  • Afonso, Inês
  • Wang, Yanrong
  • Leclerc, Jean-Charles
  • Moal, Marine
  • Houbin, Céline
  • Viard, Frédérique
  • Thiébaut, Eric
  • Fernandez-Gonzalez, Victoria
  • Navarro-Mayoral, Sandra
  • Díaz-Vergara, Sonia
  • Gittenberger, Arjan
  • Hughes, Lauren Elizabeth
  • Lampa, Maria
  • Chatzigeorgiou, Giorgos
  • Plaitis, Wanda
  • Tiralongo, Francesco
  • Martinez-Laiz, Gemma
  • Cabezas, María del Pilar
  • Duarte, Sofia
  • Pinheiro, João P.R.
  • Reis, Giovanna O.
  • Revanales, Triana
  • Sempere-Valverde, Juan
  • Aylagas, Eva
  • Poliseno, Angelo
  • Chebaane, Sahar
  • Carvalho, Susana
  • Gerovasileiou, Vasilis
  • Frutos, Inmaculada
  • Saenz-Arias, Pablo
  • Fernandez-Gonzalez, Victoria|||/items/e320fc42-d0a8-4a8f-a334-1cafcd791727
Accurate knowledge of the global distribution of non-indigenous species (NIS) is essential for understanding their invasion dynamics and for implementing timely management measures. This study reports the first records of the marine amphipod Aoroides longimerus, putatively native to the East Asian coast, in Italy (2018), Spain (2019) and Tunisia (2022) and provides the earliest documented record of the species in its introduced European range (Portugal, 2011). Furthermore, it expands the species’ known distribution in mainland Portugal (including the northernmost record), Macaronesia (with first records in the Canary Islands and Madeira), and confirms its presence along the Atlantic coasts of France and the Netherlands. Aquaculture facilities, particularly those associated with oyster farming, are probably the primary vector of introduction, while recreational boating may have contributed significantly to secondary dispersal. In comparison to other exotic amphipods, A. longimerus remains absent from many marinas, ports and/or aquaculture facilities in the Mediterranean Sea and adjacent regions, such as the Red Sea. This suggests that the species may still be in the early stages of expansion, or that its dispersal ability across marinas and ports is more limited than that of other amphipods. The present study, however, highlights several key ecological traits of A. longimerus: (i) it can survive year-round despite seasonal fluctuations, and reach high local densities, (ii) it exhibits strong colonisation capacity, as shown by its rapid establishment on settlement plates, and (iii) it displays opportunistic feeding behaviour, primarily consuming detritus. These characteristics underscore the importance of continuous surveillance and effective communication with stakeholders to prevent further expansion of this species.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Educación postural en las aulas: conocimiento docente y evaluación tecnológica de la postura estática y dinámica en estudiantes de 4º ESO

  • García-Luna, Marco A.
  • Manchado, Carmen
  • Cortell-Tormo, Juan M.
  • García-Luna, Marco A.|||/items/17d9d02a-b8c2-4e23-9ca2-8946403e3d99
  • Manchado, Carmen|||/items/9a974087-234d-4708-95e7-76e6fa160bbb
  • Cortell-Tormo, Juan M.|||/items/f9051cc6-3cbe-4a9d-83d7-7a7d027b93dc
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Postural Education in School-Aged Populations: Development and Usability Evaluation of a Mobile Biofeedback App (EduBack)

  • García-Luna, Marco A.
  • García-Jaén, Miguel
  • Ruiz-Fernandez, Daniel
  • Manchado, Carmen
  • Cortell-Tormo, Juan M.
  • García-Jaén, Miguel|||/items/2fc828ff-d9f9-4fd7-a556-e65b3bce013d
  • Ruiz-Fernandez, Daniel|||/items/d64525ae-cea8-47fd-9b9f-6ae44b45e41e
  • Manchado, Carmen|||/items/9a974087-234d-4708-95e7-76e6fa160bbb
  • Cortell-Tormo, Juan M.|||/items/f9051cc6-3cbe-4a9d-83d7-7a7d027b93dc
Background: Postural education is crucial during childhood and adolescence, yet traditional approaches often lack engaging tools that promote awareness and behavioral change. Wearable technologies and real-time biofeedback systems offer new opportunities to support postural learning through immediate, embodied feedback. However, most existing systems focus on clinical rehabilitation, with few designed specifically for educational use. Objective: This study aimed to design, develop, and evaluate the usability and technical performance of EduBack, a mobile app that delivers real-time lumbar posture biofeedback through inertial sensors, with a specific focus on educational settings such as schools and physical education environments. Methods: EduBack was developed using Kotlin (JetBrains) for Android OS (Google; version 8.0 and above) and integrates with 2 inertial measurement units via Bluetooth (2.4 GHz). The app provides visual biofeedback through a dynamic interface showing a virtual spine, corrective messages, and a color-coded alignment bar. The usability evaluation involved 24 undergraduate students (mean age 21.4, SD 1.8 y) who used the app in a controlled session. Participants completed the system usability scale and open-ended qualitative feedback questions. Technical performance data were collected from system logs, latency measurements, and received signal strength indicator values to assess connection stability and sensor-to-app communication. Results: The average system usability scale score was 83.5 (SD 8.7), indicating excellent usability. Participants reported the interface to be intuitive, the biofeedback visualization clear, and the posture information easy to interpret. Qualitative responses highlighted the app’s potential to support postural awareness and motor learning, especially in school-aged populations. From a technical perspective, the system demonstrated robust performance: mean data transfer latency was approximately 120 milliseconds, with less than 1% packet loss across sessions. Received signal strength indicator values consistently remained within the optimal signal range, confirming stable Bluetooth connectivity. All session data were successfully stored and exported without errors. The real-time posture tracking displayed on the app closely matched raw sensor data, ensuring fidelity in feedback. Conclusions: EduBack is a usable and technically stable mobile app designed to support postural education through wearable sensors and real-time biofeedback. Its user-friendly interface and reliable data transmission make it well-suited for use in schools and educational programs targeting postural health. The app fills a gap in the mobile health field by offering a preventive, educational tool rather than a clinical one. Future research should explore its application in younger populations, integration into physical education curricula, and long-term effects on postural behavior and motor skill acquisition.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Metal oxide Perovskite-Carbon composites as electrocatalysts for Zinc-air batteries. Optimization of ball-milling mixing parameters

  • García-Rodríguez, Mario
  • Flores-Lasluisa, Jhony Xavier
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
Zn-air batteries (ZABs) are promising electrochemical devices to store energy. Metal oxide perovskites mixed with carbon materials are highlighted as interesting materials for this application because of their appropriate bifunctional performance in oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). The interaction between both components of the electrocatalyst is important in the bifunctional electrocatalytic activity, and the mixing method plays an important role in this interaction. Then, different mixing methods have been studied in this work (ball-milling, mortar and manual shaking). The use of different physicochemical techniques such as temperature programmed desorption (TPD), temperature programmed reduction (TPR) and X-ray photoelectron spectroscopy (XPS) in the materials characterization, allows us to conclude that the mixing method strongly influences the particle size and the interaction between both components, which determine the final electrocatalytic activity. The materials prepared by ball-milling displayed the best performance. Herein, the experimental conditions were optimized to obtain electrocatalysts with enhanced electrocatalytic activity for ORR and OER. Low rotating speed, air atmosphere and low ball-milling time generate electrocatalysts with a small nanoparticle size, more homogeneous and with a higher interaction between both components, which enhances electron transfer, and consequently, the overall oxygen-involved reactions. The best electrocatalyst obtained was studied as air-electrode in a Zn-air battery and it was compared to a commercial Pt/C electrocatalyst, obtaining higher cyclability (55.2 vs. 51.7%) for 30 h, and higher energy density at 5 mA/cm2 (764 mAh/g vs. 741 mAh/g).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Eco-Friendly Mechanochemical Synthesis of Bifunctional Metal Oxide Electrocatalysts for Zn-Air Batteries

  • García-Rodríguez, Mario
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The development of green and environmentally friendly synthesis methods of electrocatalysts is a crucial aspect in decarbonizing energy generation. In this study, eco-friendly mechanochemical synthesis of perovskite metal oxide-carbon black composites is proposed using different conditions and additives such as KOH. Furthermore, the optimization of ball milling conditions, including time and rotational speed, is studied. The mechanochemical synthesis in solid-state conditions without additives produces electrocatalysts that exhibit the highest bifunctional electrochemical activity towards both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Moreover, this synthesis demonstrates a lower Environmental Impact Factor (E-factor), indicating its greener nature, and due to its simplicity, it has a great potential for scalability. The obtained bifunctional electrocatalysts have been tested in a rechargeable zinc-air battery (ZAB) for 22 h with similar performance compared to the commercial catalyst (Pt/C) at significantly lower cost. These promising findings are attributed to the enhanced interaction between the perovskite metal oxide and carbon material and the improved dispersion of the perovskite metal oxide on the carbon materials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Los ‘telares de rejilla o lizo de marco’ en época romana. A propósito de un hallazgo en contexto en Augusta Emerita (Mérida, España), Rigid heddles in Roman times. New evidence from Augusta Emerita (Mérida, Spain)

  • Bustamante Álvarez, Macarena
  • Morgado-Roncal, Leyre
  • Murciano Calles, José María
  • Sabio González, Rafael
  • García-Moreno, Carlos D.
Los telares constituyen uno de los principales instrumentos para la producción textil en la Antigüedad. No obstante, su localización en el registro arqueológico es escasa y limitada. Los telares verticales de pesas son la tipología más conocida, pero no la única. Excepcionalmente, se encuentran en el registro arqueológico evidencias materiales de telares de bandas para el desarrollo de estrechas cenefas que, por lo general, presentan ricas decoraciones. Una de las principales problemáticas ha sido la identificación de estas piezas, la definición de su funcionalidad textil y la confusión existente entre los distintos tipos de telares de bandas. En consecuencia, no solo son difíciles de encontrar arqueológicamente, sino que a menudo no han sido reconocidas como instrumental textil. En este trabajo, aportamos un acercamiento a la tecnología de los telares de bandas en Hispania a partir de un nuevo hallazgo: un telar de rejilla o lizo de marco procedente de un contexto funerario recientemente intervenido en Augusta Emerita (Mérida, Badajoz). Además del análisis de la pieza, planteamos un estudio contextual que permita hacer apreciaciones cronológicas. A ello se le une el estudio antropológico del difunto varón. Esto nos ayuda a plantear y discutir interesantes apreciaciones de género respecto a la configuración social del artesanado textil. Del mismo modo, recogemos un estado actual de la cuestión sobre la tecnología del telar de lizo de marco gracias a una revisión de todas las evidencias encontradas hasta la fecha a lo largo del Imperio. Con este artículo, esperamos ahondar en este tipo de tecnologías textiles, visibilizarlas y dar a conocer su materialización en el registro arqueológico.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Catalytic nitrate reduction using a Pd-Cu catalysts supported on carbon materials with different porous structure

  • González, D.T.
  • Baeza, J.A.
  • Alemany Molina, Gabriel
  • Calvo, L.
  • Gilarranz, Miguel A.
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The properties of the materials used as catalysts significantly affect their performance in catalytic NO3- reduction with hydrogen in polluted drinking water. Most studies have focused on how the active phase influences reaction selectivity and minimizes undesired NH4+ generation; however, there is still no clear consensus on the role of pore structure. In this study, carbon materials with different surface properties were used as supports to synthesize tailored Pd-Cu catalysts, assessing the role of micro- and mesopores in catalyst activity and selectivity in relation to mass transfer. Catalysts with Pd-Cu loadings of 1–1 and 1.5–1 wt% were examined. Higher catalytic activity was observed in catalysts supported on materials with low micropore volume, as limited reagent accessibility to metal within micropores hindered their effectiveness. It was also demonstrated that selectivity to NH4+ increased with higher micropore volume and micropore contribution to surface area, attributed to an imbalance in reagent transfer. This imbalance led to a higher H/N ratio at active sites within micropores and a corresponding increase in pH.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Selective lignin conversion via flow photocatalysis for vanillin and bioplasticizers production

  • Marset, Xavier
  • Montilla-Verdú, Salvador
  • Pastor, Francisco J.
  • Rico Vargas, Elio
  • Gomez-Caturla, Jaume
  • Miranda-Pinzon, Mario
  • Lazaro-Hdez, Carlos
  • Bertella, Stefania
  • Ortuño, Manuel A.
  • Balart, Rafael
  • Aschauer, Ulrich
  • Guijarro, Nestor
  • Marset, Xavier|||/items/264458f6-b460-4a46-81f9-32bcd73610cb
  • Montilla-Verdú, Salvador|||/items/1f60cace-de12-4c2f-b23d-656d1466fe87
  • Rico Vargas, Elio|||/items/e0ee2f23-487d-4722-b959-2a3749d57bd1
  • Ortuño, Manuel A.|||/items/8e15fce8-7d2f-408c-83de-bc85da711f44
  • Guijarro, Nestor|||/items/c3f0ef18-dc8e-4f72-81e4-387b754804f5
Lignin valorization remains a roadblock in the development of green biorefineries. Currently, depolymerization strategies predominantly depend on energy- and resource-intensive thermochemical methods, while potential applications of the resulting bio-based products are often overlooked. Here, we show a scalable photocatalytic flow reactor for lignin deconstruction that operates at ambient conditions, along with a downstream process that yields commercially viable products at gram scale. An anthraquinone-based photocatalytic platform, when packed in a flow bed reactor, is demonstrated to selectively and nearly quantitatively cleave lignin’s β-O-4 moieties, achieving a benchmark yield of 7.1 wt% for vanillin. The utilization of residual oligomers as plasticizers for biobased polylactic acid resulted in improved mechanical properties and shape memory effects, while maintaining its suitability for conventional 3D printing. This aldehyde-oriented platform represents a key advancement that complements existing ketone-oriented photocatalytic approaches targeting valuable chemicals from lignin conversion, and it ultimately contributes to the holistic utilization of lignin.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Unraveling the interfacial degradation mechanism of a metal oxide electrocatalyst/gas diffusion layer in Zn–air batteries through FIB-SEM analysis

  • García-Rodríguez, Mario
  • González-Souto, Lorena
  • Hernández-Saz, Jesús
  • Juan Juan, Jerónimo
  • Calvino, Jose J.
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Focused Ion Beam -Scanning Electron Microscopy (FIB-SEM) was employed to investigate the Gas Diffusion Layer (GDL), electrocatalyst, and electrolyte interface in rechargeable Zn-Air Batteries (ZABs) using Fresh and Used samples (before and after long-term electrocatalytic activity, respectively). The electrocatalyst was based on (hydro-)oxides of manganese, cobalt and lanthanum and carbon material. The results reveal a loss of material compaction in the Used sample, accompanied by the formation of pores and irregular gaps, as well as enhanced permeation of the electrocatalyst through the GDL, as evidenced in the tomogram. Interestingly, the analysis of the distribution of elements in the Used sample shows important differences, strongly dependent on their chemical properties in the electrolyte used. Mn and Co, the more electroactive elements for the oxygen-involved reactions, remain in proximity to the electrolyte interface, while La forms a preferential region more distant and parallel to the electrolyte. XPS results indicate that the formation of this region is associated with the generation of lanthanum acetate species, which are responsible for the decrease in conductivity of the Used sample, as demonstrated by electrochemical impedance spectroscopy (EIS) experiments, in addition to impairing O 2 diffusion along the GDL. Furthermore, DFT calculations support that the formation of lanthanum acetate species from the metal (hydro)oxides is energetically favorable in presence of zinc acetate electrolyte in ZABs.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enhanced lanthanum-stabilized low crystallinity metal oxide electrocatalysts with superior activity for oxygen reactions

  • García-Rodríguez, Mario
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are key electrochemical reactions for the development of rechargeable Zn-air batteries. However, due to the high cost of commercial noble metal-based catalysts and their limited bifunctionality, it is necessary the design of new electrocatalysts. In this study, stable electrocatalysts have been synthesized through a hydrothermal method and further low-temperature thermal treatment. The materials consist of La stabilized low crystallinity Mn and Co metal (hydro-)oxides. The electrocatalytic performance of these materials has been compared with counterparts calcined at higher temperatures. The findings demonstrate that materials synthesized at lower temperatures and with low crystallinity exhibit superior electrocatalytic activity for both ORR and OER. Moreover, the research highlights the favorable influence of the lanthanum cation, which enhances changes of surface morphology and oxidation states of other cations (Mn and Co). Additionally, the positive contribution of the carbon component to electrochemical activity and electrical conductivity has been elucidated. The best electrocatalyst was studied in a rechargeable Zn-air battery with a durability of up to 120 hours. They exhibited better stability and performance than the commercial Pt/C + RuO2 catalyst currently used.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Efficient biomass-derived catalysts for alkaline short-chain alcohols electroreforming: A focus on low platinum loading

  • Alemany Molina, Gabriel
  • Mosca, Erminia
  • Lo Vecchio, Carmelo
  • Aricò, Antonino Salvatore
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Baglio, Vincenzo
  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Materials based on low Pt content have been exhaustively studied as hydrogen evolution reaction (HER) electrocatalysts. However, the study of these materials for electroreforming applications is limited because of the low methanol tolerance of Pt. Furthermore, the preparation methods usually imply several synthesis steps that put a brake on the production scaling up. In this work, an electrocatalyst prepared by a one-pot approach from a biomass residue (almond shells) based on Pt-Fe nanoparticle alloys is proposed as an efficient cathode catalyst for methanol electroreforming. The characterization of the material showed the formation of homogeneously distributed nanoparticles and a high volume of mesopores. Although the performance compared to a Pt/C cathode (∼0.5 mg Pt cm−2) at 30 °C was lower, the current reached at 0.9 V at 60 °C was equivalent using lower Pt loading (∼0.1 mg Pt cm−2). A 30 h durability test indicated high degradation for Pt/C because of agglomeration while no important modifications were detected for the biomass-derived material.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

The role of oxygen heteroatoms in the surface (electro)chemistry of carbon materials

  • Alemany Molina, Gabriel
  • Martínez-Sánchez, Beatriz
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Engineering the surface chemistry of carbon-based materials is of crucial importance in tuning their intrinsic properties, including electrical conductivity, wettability, electroactivity, adsorption potential, reactivity, physical and chemical stability. Intense research has recently focused on understanding the role of surface oxygen functional groups when carbon materials are in contact with an electrolyte or solvent in order to tailor and improve them for technological applications. For this purpose, their synthesis method and/or further oxidation treatments should be carefully selected, since they can substantially influence not only the oxygen content, but also the nature of the oxygen moieties, which could be decisive in determining the surface properties of the resulting material. The combined use of different chemical, spectroscopic and electrochemical techniques, provides unique and reliable information about the contribution of a specific oxygen-containing group in the surface (electro)chemistry of carbon-based materials. This paper provides a discussion of the role of oxygen heteroatoms in the surface electrochemistry of a carbon material as they relate to their influence on both its electroactivity and reactivity.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Integrating biofeedback technologies into postural education: improving back posture, health literacy, and sustainable health habits

  • García-Luna, Marco A.
  • García-Jaén, Miguel|||/items/2fc828ff-d9f9-4fd7-a556-e65b3bce013d
  • Manchado, Carmen|||/items/9a974087-234d-4708-95e7-76e6fa160bbb
  • Cortell-Tormo, Juan M.|||/items/f9051cc6-3cbe-4a9d-83d7-7a7d027b93dc
Low back pain (LBP) is a prevalent condition across all ages, and inadequate back posture is a key contributing factor. Educational settings offer an opportunity to promote postural awareness as a preventive measure. Biofeedback tools, such as the EduBack system, which uses Inertial Measurement Units (IMUs) to monitor lumbar curvature, have shown potential for enhancing body awareness and supporting posture correction. However, their impact within school-based postural education remains underexplored. This study evaluated the immediate effects of the EduBack biofeedback system on postural awareness and back posture habits among secondary school students. An experimental pre-post design was implemented with 47 students in their fourth year of secondary education, randomly assigned to an experimental group using the biofeedback tool or a control group. Across eight sessions, several postural parameters were assessed during sitting, standing, and functional lifting tasks. The experimental group showed significant improvements in most measured postural variables. Lumbar lordosis in sitting increased from –5.9° to –10.1° ( = 0.18), maximum active pelvic tilt range of motion in standing improved from 20.4° to 30.7° ( = 0.63), and excessive lumbar flexion-extension during the rising-from-a-chair task decreased from 82.7% to 41.1% ( = 0.27). Significant Group × Time interactions (p < 0.05) confirmed that the biofeedback tool produced greater improvements than the control group. These findings indicate that the EduBack biofeedback system enhances immediate postural awareness and supports healthier back posture behaviours in adolescents. The results highlight the potential of integrating biofeedback technologies into school-based postural education programmes and underscore the need for further research examining long-term effects and broader implementation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Turismo y Cambio Climático: Aplicación del Holiday Climate Index (HCI:Urban) en España en los meses de verano para mediados y finales de siglo, Tourism and Climate Change: Application of the Holiday Climate Index (HCI:Urban) in Spain in the summer months for the mid and late century

  • Díaz-Poso, Alejandro
  • Royé, Dominic
  • Martínez Ibarra, Emilio
En las últimas décadas el turismo ha adquirido una importancia cada vez mayor en la economía española. Con 83,5 millones de turistas en 2019, el 11.7% del PIB nacional proviene del sector turístico. El clima es uno de los principales aspectos a tener en cuenta por las personas para elegir un destino turístico. El índice Holiday Climate Index (HCI) es un indicador bioclimático que tiene en cuenta diferentes variables climáticas (temperatura, precipitación, humedad, viento y nubosidad), con el fin de determinar si las condiciones climáticas son adecuadas para las actividades turísticas de carácter urbano. Utilizando el HCI:Urban, se ha analizado la evolución de los niveles de confortabilidad climática para la Península y Baleares (PB) en verano (junio, julio y agosto) para mediados (2041-2060) y finales de siglo (2081-2100) bajo los escenarios climáticos RCP 4.5 y 8.5. Tomando como referencia el periodo 1986-2005, los resultados indican un aumento considerable del confort climático especialmente a finales de siglo en las comunidades autónomas del norte y noroeste del país, donde los valores, alcanzan la calificación de "excelente" (HCI 80-90). Paralelamente, la progresiva pérdida de confort a consecuencia del cambio climático en comunidades autónomas meridionales como Extremadura, Murcia, Andalucía e Islas Baleares, dará lugar a cambios en la distribución espacio-temporal de los flujos turísticos. Pese a que su formulación es susceptible de mejora, los datos proporcionados por el índice HCI:Urban pueden ser útiles en el desarrollo de instrumentos de planificación urbana, facilitando a las autoridades la toma de decisiones en un nuevo contexto turístico.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Influence of environmental pressure and inhibitory control capacity on anxiety, mental workload and shooting performance in multitasking basketball contexts

  • Gutiérrez-Capote, Alejandro
  • Jiménez-Martínez, Jesús
  • Madinabeitia, Iker
  • Torre, Elisa
  • Leicht, Anthony
  • Botía, María
  • Alarcón, Francisco
  • Cárdenas, David
  • Madinabeitia, Iker|||/items/700b2328-8459-463c-9f8e-6926d09cd8d3
  • Alarcón, Francisco|||/items/c9b90a86-f5c9-47b2-86ac-474876c3d050
Background: Basketball shooting performance is crucial for match outcomes, often influenced by environmental pressure and anxiety. This study investigates how increased task demands and outcome consequences affect anxiety, mental workload, and shooting performance in multitasking basketball contexts. Additionally, it examines the moderating role of inhibitory control (IC) on these effects. Methods: Thirty-nine youth basketball athletes (26 males and 13 females; age 14.9 ± 1.3 years) participated in two experimental sessions with varying levels of environmental manipulation: Low Environmental Manipulation (LEM) and High Environmental Manipulation (HEM), differing in the cognitive-motor complexity of the task and the consequences associated with performance outcomes. An intrasubject, repeated measures design was used, where participants performed multitasking activities involving dribbling and shooting under different rules and scoring systems. Anxiety, mental workload, and shooting performance were measured, along with participants' baseline IC. Results: The HEM condition significantly increased anxiety (p < 0.001) and mental workload (p < 0.001) compared to the LEM condition, leading to a notable decrease in shooting performance (p < 0.001). Participants with higher IC exhibited better performance (p = 0.007 for LEM, p = 0.046 for HEM) and lower mental workload. Regression analyses indicated that cognitive-motor performance accuracy (p = 0.016) and mental activity (p = 0.004) were significant predictors of shooting performance and state anxiety (p < 0.001). Conclusions: Environmental pressure, through increased task demands and outcome consequences, elevates anxiety and mental workload, negatively impacting basketball shooting performance. Higher IC moderates these effects, suggesting that athletes with better inhibitory abilities can maintain performance under pressure. These findings highlight the importance of designing training programs that simulate competitive pressure and develop athletes' cognitive control capacities.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

The effect of asking for intermediate quantities when solving multi-step word problems

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Changes in Perceived Mental Load and Motor Performance during Practice-to-Learn and Practice-to-Maintain in Basketball

  • Gutiérrez-Capote, Alejandro
  • Madinabeitia, Iker
  • Torre, Elisa
  • Alarcón, Francisco
  • Jiménez-Martínez, Jesús
  • Cárdenas, David
  • Alarcón, Francisco|||/items/c9b90a86-f5c9-47b2-86ac-474876c3d050
  • Madinabeitia, Iker|||/items/700b2328-8459-463c-9f8e-6926d09cd8d3
Background: Attentional resource allocation during sports practice is associated with the players’ perceived mental load. However, few ecological studies address this problem by considering the players’ characteristics (e.g., practice experience, skill and cognition). Therefore, this study aimed to analyse the dose-response effect of two different types of practice, each with different learning objectives, on mental load and motor performance by using a linear mixed model analysis. Method: Forty-four university students (age 20.36 ± 3.13 years) participated in this study. Two sessions were conducted, one based on a standard rules 1 × 1 basketball situation (“practice to maintain”) and one with motor, temporal and spatial restrictions in 1 × 1 tasks (“practice to learn”). Results: “Practice to learn” produced a higher perceived mental load (NASA-TLX scale) and a worse performance than “practice to maintain”, but was moderated by experience and inhibition (p = 0.001). The same happens in the most demanding restriction (i.e., temporal, p < 0.0001). Conclusion: The results showed that increasing the difficulty of 1 × 1 situations through restrictions harmed the player’s performance and increased their perceived mental load. These effects were moderated by previous basketball experience and the player’s inhibition capacity, so the difficulty adjustment should be based on the athletes themselves.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

«Los ángeles no se discuten»: la legitimación de la figura de María de las Mercedes de Orleans, «Los ángeles no se discuten»: the legitimisation of the figure of Maria de las Mercedes de Orleans, « Los ángeles no se discuten » : la légitimation de la figure de María de las Mercedes de Orléans

  • Lillo-Gutierrez, Berta
  • Lillo-Gutierrez, Berta|||/items/f8c069fd-eaf6-4a70-b1ae-2c8e53e0ff52
Este artículo analiza la construcción legitimadora que envolvió a la reina María de las Mercedes de Orleans, primera esposa de Alfonso XII. La brevedad de su reinado, que no llegó al medio año, ha provocado que no se haya estudiado detenidamente su imagen pública a pesar del interesante discurso que la rodea. Su figura, y por lo tanto su legitimidad como reina, quedaron ocultas tras su muerte en un halo romántico, pero al examinarlo atentamente, ignorando la influencia de la mitificación posterior, emergen otros elementos legitimadores clave. En un momento de consolidación del liberalismo en el que la monarquía debía adaptarse para sobrevivir, la religión, las cualidades o la nacionalidad de las consortes regias cobraron importancia, pues como representantes de la nación tuvieron que encarnarla y servir como modelo. Por lo tanto, se debía de construir una imagen sólida que popularizase a las reinas y, por extensión, solidificase el papel de la monarquía en la concepción nacional.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

High-performance transition metal nitride/carbon nanofiber composites as positive electrode in rechargeable Zn-air batteries

  • Posadzy, Marta
  • García-Rodríguez, Mario
  • Flores-Lasluisa, Jhony Xavier
  • Moyseowicz, Agata
  • Kordek-Khalil, Karolina
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
Rechargeable zinc-air batteries (ZABs) represent one of the most promising devices for future portable energy storage. However, bifunctional and cost-effective electrocatalysts for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) need to be developed for practical real-world scenarios. This work presents a comprehensive optimization of the simple and green hydrothermal method to synthesise metal (Co/Fe) nitrides integrated with carbon nanofibers (CNF). The prepared nanocomposites exhibit remarkable electrocatalytic performance in OER and ORR. The combination of both metals in the CoFe-Fe3N/CNF material induces the highest bifunctional activity, attributed to a synergistic effect between the metals, and presence of a thin layer of cobalt oxide at the surface. The CNF content in the composite material is optimised, revealing the favourable CNF concentration of 60 wt.%. The electrocatalysts with the highest bifunctional activity were evaluated as positive electrodes in ZABs, achieving superior cycling stability compared to a commercial Pt/C-RuO2 electrocatalyst, and sustaining stability up to 60 hours at a current density of 5 mA/cm2. These results underline the significant potential of cobalt-iron nitride/carbon nanofiber composites as highly efficient catalysts for oxygen electrochemical reactions and as promising components for improving the performance of rechargeable Zn-air batteries, thus contributing to the advancement of clean energy technologies.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Emisiones difusivas de CO2 en áreas con actividad volcánica reciente (Campo de Calatrava, España)

  • García-Martínez, Noé
  • Blanco-Quintero, Idael Francisco
  • Cañaveras, Juan C.
  • Fernández Cortés, Ángel
  • Girona, Társilo
  • Benavente, David
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
  • Blanco-Quintero, Idael Francisco|||/items/7fa3db0a-c737-4d07-92cc-9acf0634db50
  • Cañaveras, Juan C.|||/items/a5988686-5d8d-4ce2-8f43-a9c27df34477
  • García-Martínez, Noé|||/items/35ea3f49-d77a-4740-8ca5-5bb024c9170c
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Naturally occurring eugenyl acetate as biobased plasticizer for sustainable polylactide formulations with improved toughness

  • Barrera-Juca, D.
  • Lazaro-Hdez, Carlos
  • Gomez-Caturla, Jaume
  • Guijarro, Nestor
  • Marset, Xavier
  • Balart, Rafael
  • Guijarro, Nestor|||/items/c3f0ef18-dc8e-4f72-81e4-387b754804f5
  • Marset, Xavier|||/items/264458f6-b460-4a46-81f9-32bcd73610cb
In this study, we explore the potential of eugenyl acetate (EAc), a naturally occurring ester of eugenol, as a biobased plasticizer to overcome the intrinsic brittleness of polylactide (PLA) derived from starch. A theoretical assessment of the miscibility between PLA and EAc is carried out. Our findings demonstrate that EAc shows exceptional miscibility with PLA, as confirmed by their similar solubility parameters (EAc-19.83 MPa1/2, and PLA-20.66 MPa1/2), and an interaction parameter of χ = 0.39. The incorporation of EAc improves the ductility of PLA, with strain at break increasing to 427.7 % at 20 wt% EAc, compared to a brittle 10.2 % for neat PLA. The plasticizing effect of EAc also leads to a considerable reduction in the glass transition temperature of PLA, from 60.4 °C to 35.7 °C at 20 wt% EAc. Scanning electron microscopy reveals no phase separation and the development of plastic deformation in PLA formulations with 15–20 wt% EAc. Additionally, all plasticized formulations exhibit full biodegradation in controlled compost conditions in <8 weeks. These results contribute to advancing PLA-based formulations that are both high-performance and eco-friendly, supporting the broader goals of sustainable development in polymer science.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Effect of Sr substitution in La1-xSrxMn0.7Co0.3O3 perovskites and their application in Zn-air batteries

  • Flores-Lasluisa, Jhony Xavier
  • García-Rodríguez, Mario
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
La1-xSrxMn0.7Co0.3O3 perovskite materials were synthesized by a sol-gel method for their application as an air electrode in Zn-air batteries. Through physicochemical techniques, it was determined that the Sr substitution level influences the crystallite size and purity degree of the perovskite structure. Moreover, the surface chemistry, including oxygen chemisorbed species and different oxidation states of 3d cations, can be tailored through the Sr substitution level. The metal oxides were mixed with carbon black (Vulcan XC-72R) to improve the electrochemical performance. Temperature Programmed Desorption (TPD) and Temperature Programmed Reduction (TPR) studies revealed the strong interaction existing between both components, which tends to increase with the Sr substitution level due to the smaller crystallite size. However, low Sr substitution level results in better electrocatalytic performance because of a moderate concentration increase of Mn4+ and oxygen chemisorbed species. Moreover, it helps to preserve the perovskite structure and increases the concentration of Co3+ species, which are more catalytic towards OER. Thus, the La0.8Sr0.2Mn0.7Co0.3O3/Vulcan material was studied in a Zn-air battery and compared to a commercial Pt/C + RuO2 electrocatalyst. The material shows comparable long-term charge-discharge performance to Pt/C + RuO2 after 20 h of cycling.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Unlocking the efficiency of low-Cu content metal oxide perovskite for green ammonia synthesis through electrochemical nitrate reduction

  • García-Rodríguez, Mario
  • Dutta, Abhijit
  • Liu, Menglong
  • Broekmann, Peter
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The electrochemical nitrate reduction reaction (e-NO3RR) is gaining attention as a strategy for nitrate removal in wastewater treatment, with the dual benefit of converting harmful nitrates into a valuable chemical resource such as ammonia. However, developing active and selective electrocatalysts remains a critical hurdle for industrial implementation. This work addresses this challenge by exploring perovskite-type metal oxides composed of Mn, Co, and Cu at different Mn:Cu ratios. Our results demonstrated that a low Cu content led to remarkably high Faradaic efficiencies toward ammonia (FENH3), approaching 100% at a potential of –0.3 V vs. RHE in alkaline electrolyte. This finding translated to an ammonia production rate of 1.6 mmol h-1 mgcat-1 cm-2, markedly surpassing the performance of Mn-based electrocatalysts alone. This enhancement was attributed to the formation of hetero-interfacial perovskite crystal structures of La(MnCo)O3 and La2(CuO4), the formation of porous surface morphologies, and enhanced presence of surface oxygen vacancies. The Cu(I)/Cu(II) and Mn(III)/Mn(IV) redox transitions are highlighted as the cause of the improvement related to synergistic effects. Mn centers provide optimal adsorption and activation of nitrate, while adjacent Cu sites facilitate efficient proton transfer through enhanced H2O activation. The samples were also analyzed in neutral medium and presented FENH3 ∼40% at –0.2 V. Notably, the samples exhibited excellent stability under e-NO3RR conditions for 24 h, thereby highlighting their potential for practical applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Estimation of mineral saturation and CO2 partial pressure in natural waters using electrical conductivity and pH: A fast and versatile on-site tool

  • Benavente, David
  • Ruiz, Maria Candela
  • García-Martínez, Noé
  • Vergara, M.
  • Fernández Cortés, Ángel
  • Sánchez Moral, Sergio
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
  • García-Martínez, Noé|||/items/35ea3f49-d77a-4740-8ca5-5bb024c9170c
This study presents a methodology for estimating the saturation index (SI) of halite, gypsum, anhydrite, and calcite, as well as the partial pressure of CO2 (logPCO2), using easily measurable water parameters: electrical conductivity, temperature, and pH. Our approach eliminates the need for extensive chemical analyses, allowing an efficient on-site application. PHREEQC was used to generate water composition datasets for single-salt systems (NaCl, CaCO3 and CaSO4) and mixed-salt systems, and to calculate SI and logPCO2. Multiple linear regression (MLR) equations were developed to enhance estimations and provide practical expressions. The estimations for the NaCl and CaCO3 systems have a higher accuracy compared to those for the CaSO4 system. MLR equations significantly improve the estimation accuracy over theoretical equations, both in single and mixed systems. Validation against experimental and natural karst water datasets from the Rull Cave area (SE Spain) confirmed that the theoretical equations reliably estimate SI and logPCO2 when the ionic contribution from other salts is below 20 %, with optimal accuracy under 10 %. A Microsoft Excel spreadsheet is provided to facilitate the use of both theoretical and MLR equations. Additional applications of the methodology to the KCl, Na2SO4, MgCl2, and Na2CO3 systems are also included in the Supplementary Material. This methodology offers an efficient tool for evaluating water–mineral equilibria (particularly in karst environments) by identifying oversaturation states, assessing CO2 exchange conditions, and guiding sampling strategies. Finally, our study highlights the key role of electrical conductivity in hydrogeochemical modeling and geochemical assessments in both natural and engineered systems.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

In-situ synthesis of encapsulated N-doped carbon metal oxide nanostructures for Zn-air battery applications

  • Flores-Lasluisa, Jhony Xavier
  • García-Rodríguez, Mario
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
La, Mn and Co-based materials with diverse compositions encapsulated in N-doped carbon materials were synthesized by an in-situ sol-gel method. The as-prepared materials were physically activated with CO2 giving as a result composites with excellent performance for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). The composites were characterized by different physicochemical techniques revealing the importance of porosity created by CO2 activation. This crucial step increases the number of accessible active sites such as Co-Nx-C sites, Co/MnO heterointerfaces and graphitic N groups. Moreover, the formation of La2O2CO3 was detected to enhance electrical conductivity and electrochemical performance and it is active for ORR. Although the composite containing La, Mn and Co has less concentration of the highly active sites, its small particle size favour a better distribution of these sites. The Co-containing composites were tested as air-electrodes in a Zn-air battery and compared to commercial electrocatalysts. All composites showed a better operation in terms of higher cyclability and higher energy density which is a consequence of metal nanostructures encapsulation in N-doped porous carbon shells. Interestingly, the pure Co-based composite showed an outstanding performance related to the high concentration of the Co-Nx-C active sites that provide high activity and stability.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Complejidad y variabilidad en la traducción de la literatura a lectura fácil, Complexity and Variability in the Translation of Literature into Easy Language

  • Toribio Camuñas, Silvia
En el ámbito de la traducción accesible, la modalidad de la Lectura Fácil (LF) suscita una creciente atención académica y científica internacional. La LF, dirigida en primera instancia a personas con problemas de comprensión lectora, prolifera en textos de todos los géneros y temáticas, desde los jurídicos hasta los patrimoniales y los literarios. Este aumento de los materiales traducidos a LF según distintas directrices (en España, AENOR 2018; IFLA 2012; Inclusion Europe 2009), así como de publicaciones científicas que presentan su estado de la cuestión (Lindholm y Vanhatalo 2021; Maaß 2020), deja cada vez más patente una tendencia a la interpretación subjetiva de las normas, que resulta en traducciones heterogéneas. Pese a los avances recientes, todavía falla la comprobación empírica de las pautas de simplificación y el estudio individualizado de las necesidades de los usuarios (Toribio Camuñas y Jiménez Hurtado 2022), y son escasas las iniciativas que pretenden crear una definición epistemológica de la LF y describir su proceso traductor. En este artículo se presentan los resultados de un estudio de caso de varios fragmentos de los clásicos literarios Don Quijote de la Mancha y El Principito en LF, en sus versiones traducidas según diferentes normativas y directrices (de Cervantes Saavedra 1605/2015; de Cervantes Saavedra 1605/2019; de Saint-Exupéry 1943/2018; de Saint-Exupéry 1943/2019). Los datos obtenidos refrendan la hipótesis de partida y reflejan la profunda heterogeneidad de los textos meta, producida por las carencias de las directrices de simplificación, a la vez que ponen de manifiesto las dificultades que plantea la traducción del género literario a LF. Estos resultados apuntan, a su vez, a la necesidad de avanzar hacia una investigación empírica y descriptiva que aspire a crear traducciones que, dejando espacio para el disfrute de la lectura, conserven un cierto grado de homogeneidad, teniendo en cuenta que este fenómeno es un parámetro del acceso al conocimiento.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

EduBack intervention database

  • García-Luna, Marco A.
  • García-Luna, Marco A.|||/items/17d9d02a-b8c2-4e23-9ca2-8946403e3d99
Base de datos del artículo con doi 10.1057/s41599-026-08569-y. Título del artículo: Integrating biofeedback technologies into postural education: improving back posture, health literacy, and sustainable health habits.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Cuantificación y modelización del transporte de gases en sistemas volcánico-hidrotermales y su relación con anomalías geotérmicas detectables vía satélite

  • García-Martínez, Noé
  • García-Martínez, Noé|||/items/35ea3f49-d77a-4740-8ca5-5bb024c9170c
Las erupciones volcánicas representan una de las mayores amenazas naturales para la sociedad, ya que pueden causar graves impactos humanos, económicos y ambientales. Anticipar estos eventos requiere comprender las señales precursoras que reflejan los cambios que ocurren en el interior de los volcanes. Esta investigación doctoral se centra en el estudio de anomalías térmicas de baja temperatura, detectables meses y años antes de erupciones volcánicas, observadas por satélite y su posible relación con los procesos magmático-hidrotermales que preceden a las erupciones. El trabajo combina observaciones satelitales, estudios de campo, experimentos de laboratorio y modelización numérica para analizar cómo los volátiles, especialmente el vapor de agua y el dióxido de carbono, liberados desde el interior de la Tierra, pueden generar un calentamiento sutil pero persistente en la superficie. Los resultados muestran que la condensación del vapor bajo el suelo libera calor, que asciende lentamente, mediante conducción y advección, y produce estas anomalías térmicas detectables desde el espacio. Los análisis realizados en las islas volcánicas de El Hierro y Tenerife (Canarias) revelan que estas variaciones térmicas están relacionadas con episodios de sismicidad y desgasificación, y pueden actuar como indicadores tempranos de reactivación volcánica. Asimismo, se observó que en 2025 El Hierro no presentaba signos de actividad magmática significativa. En conjunto, esta tesis ofrece una visión integradora sobre cómo el transporte de gases y calor en el subsuelo puede manifestarse en la superficie, aportando nuevas herramientas para el pronóstico volcánico y la gestión del riesgo asociado a volcanes activos.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Carbon-Driven Enhancement in Zinc Hexacyanoferrate Composites: A Ball-Milling Approach for High-Performance Zn-Ion Batteries

  • García-Rodríguez, Mario
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Toledo-Carrillo, Esteban A.
  • Dutta, Joydeep
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Transition to a sustainable energy future demands the development of alternative battery technologies beyond lithium-ion batteries, which are challenging for large-scale implementation due to inherent safety concerns and resource scarcity. Aqueous zinc-ion batteries (ZIBs) are a promising solution; however, improvement of the cathode is essential for their widespread adoption. This study investigates the structural modification of zinc hexacyanoferrate (ZnHCF) as cathode materials using ball-milling and the addition of carbon black (Vulcan XC-72R). The improved electroactivity is attributed to the phase transition from cubic to rhombohedral, the conversion of Prussian blue analogue to Prussian white analogue phases, and the synergistic effect produced by the presence of carbon material. These changes lead to the formation of [Fe(CN)6] vacancies, which draw water molecules into interstitial sites. Carbon material plays a crucial role in preserving the crystalline structure of ZnHCF and enhancing the electrochemical performance. The sample milled in presence of carbon material (BM-ZnHCF@C sample) demonstrates superior results compared to the samples unmilled and milled samples without carbon material, achieving a capacity close to 100 mAh g−1 at a current density of 0.5 A g−1. However, after 50 cycles, the capacity decreases by 53.3%, but is restored by replacing the Zn anode while retaining the same cathode. The zinc anode is the primary factor hindering the long-term performance of the assembled battery, as demonstrated by the evolution of the electrode potential over time in the ZIB using a T-type electrochemical cell.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Control of Stimulated Emission of Tin Perovskites through Polymeric Diffractive Gratings

  • Martínez-Pastor, Juan P.
  • Sánchez-Díaz, Jesús
  • Villalvilla, José M.
  • Soriano-Díaz, Sandra
  • Quintana, José A.
  • Mora-Sero, Ivan
  • Díaz-García, María A.
  • Suárez, Isaac
  • Díaz-García, María A.|||/items/3b28d03f-511f-4a32-9ff4-d4a2e740834f
  • Villalvilla, José M.|||/items/e57ae241-3d26-4d3e-815b-6f890edaa475
FASnI3 (FA: formamidinium) polycrystalline perovskite thin films have demonstrated to be an excellent gain media and less toxic alternative to the Pb-containing perovskite light emitters. However, the instability of Sn perovskites prevents the postprocessing of the film after deposition, making its integration in two-dimensional optical architectures challenging. In this article, FASnI3 polycrystalline thin films are successfully integrated with polymeric diffractive gratings under cost-effective and industrial compatible technology. The gratings are fabricated under holographic techniques, allowing patterning on large areas (≈1 cm2) and the posterior deposition of the perovskite films or cladding layers. The grating period demonstrated to be an adequate tuning parameter to control the amplified spontaneous emission (ASE) properties. Notably, the overlap of the mode with the emission band represents a suitable mechanism to selectively enhance the generation of the ASE (tuned device) above a moderate threshold of 100 μJ/cm2 and extract the random lasing lines created on the grains of the film (detuned device). These results represent a significant advance on Sn-perovskite-based optical sources, offering cost-effective technology for next-generation photonic applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Relationship between Cognitive Demands and Biomechanical Indicators Associated with Anterior Cruciate Ligament Injury: A Systematic Review

  • Jiménez-Martínez, Jesús
  • Gutiérrez-Capote, Alejandro
  • Alarcón, Francisco
  • Leicht, Anthony
  • Cárdenas, David
  • Alarcón, Francisco|||/items/c9b90a86-f5c9-47b2-86ac-474876c3d050
Background Anterior cruciate ligament (ACL) injury during contact sports has a high incidence that has not been reduced despite the immense resources devoted to understanding its aetiology. A neurocognitive approach could increase knowledge of the mechanisms contributing to ACL injury enabling practitioners to address and minimise future risk. Objective To systematically review the influence of manipulating cognitive demands during motor tasks (i.e. degree of uncertainty) on biomechanical variables associated with ACL injury risk. Methods A systematic review was performed according to the Cochrane Handbook for Systematic Reviews of Interventions by searching the major sporting electronic databases. The search strategy included four groups of terms and was conducted by two authors independently. All studies were screened using unique inclusion criteria, with the included studies assessed for risk of bias. Results Twenty-five studies were identified from 2031 records and included into the review process. During the experimental conditions where cognitive demands were higher, most biomechanical indicators associated with a greater risk of ACL injury during landing and cutting tasks were significantly enhanced compared with conditions with low or no cognitive demands. Conclusions An increase in task complexity through cognitive load significantly leads to changes in mechanisms associated with ACL injury during single-leg landings and cutting movements. Consequently, coaches and exercise professionals should consider inclusion of dual-task paradigms or uncertainty during injury risk assessment scenarios and injury prevention programs to help identify athletes at risk of ACL injury and reduce ACL injury frequency. Registration This protocol was registered in the PROSPERO database (https://www.crd.york.ac.uk/PROSPERO) in May 2022, with the registration number CRD42022315795.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Fe-Nx biomass-derived carbon material as efficient cathode electrocatalyst for alkaline direct methanol fuel cells

  • Alemany Molina, Gabriel
  • Baglio, Vincenzo
  • Zignani, Sabrina Campagna
  • Aricò, Antonino Salvatore
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Lo Vecchio, Carmelo
  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Biomass-derived carbon materials are emerging as potential alternatives to reduce the production cost and environmental impact of electrocatalysts production. This study aims to assess two catalysts based on Fe sites over N-doped carbon materials with different textural properties towards oxygen reduction reaction (ORR) for alkaline direct methanol fuel cell (ADMFC) applications. Almond shell (AS) residues and an activated carbon (KUA) were proposed as carbon precursors for the two Fe-N-C catalysts which were obtained by similar synthesis procedures and carbonized at 900 °C in a single high-temperature treatment. Although the activity and selectivity towards the ORR of both samples evaluated in a half-cell configuration were comparable, very different performances were observed in an ADMFC device. The membrane-electrode assembly (MEA) containing the biomass-derived carbon material at the cathode side showed a high-power density, comparable to a 40 wt% Pt/C at low methanol concentration (1 M). The performance of the MEAs containing the synthesized electrocatalysts was maintained or increased in a 5 M methanol solution while Pt/C-based MEA suffered depolarization for concentrations higher than 1 M. After a 100 h durability test, high power density was maintained with the Fe-N derived biomass electrocatalyst. This work provides a first approach of applying biomass-derived catalysts as cathodes for ADMFCs and challenges in terms of stability and performance are explored.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Exploring the effect of surface chemistry and particle size of boron-doped diamond powder as catalyst and catalyst support for the oxygen reduction reaction

  • Alemany Molina, Gabriel
  • Martínez-Sánchez, Beatriz
  • Gabe, Atsushi
  • Kondo, Takeshi
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The interest for the electrodes based on conductive boron-doped diamond powder (BDDP) is increasing in recent years due to their excellent physical and chemical stability, the wide potential window in both aqueous and organic electrolytes, the relatively large specific surface area, and their versatility in comparison to boron-doped diamond thin film electrodes. These materials have been proposed as alternative cathode catalyst support due to their high corrosion resistance when subjected to the highly positive potentials originated during the start-stop operations in fuel cells, especially in automobiles. In this work, we present three BDDP supports with different particle sizes and different surface oxygen contents as supports of different iron species for oxygen reduction reaction in alkaline solution. BDDP supports were modified with carbon nitride (C3N4) or phthalocyanines (Pc) as anchoring points for iron. The different electrocatalytic performance observed confirmed the strong influence of the surface chemistry of the BDDP supports on the activity of the metallic sites for FePc samples while, for Fe-C3N4 samples, the determining effect was the particle size of the BDDP support. Additionally, DFT calculations were used to obtain some insights about the interaction of the FePc with the diamond surface.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

222Rn and CO2 monitoring in soil and indoor atmosphere to understand changes in the gaseous dynamics of Rull cave (Spain)

  • Pla, Concepción
  • Ruiz, Maria Candela
  • Gil-Oncina, Sara
  • García-Martínez, Noé
  • Cañaveras, Juan C.
  • Cuezva Robleño, Soledad
  • Fernández Cortés, Ángel
  • Sánchez Moral, Sergio
  • Benavente, David
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
  • Cañaveras, Juan C.|||/items/a5988686-5d8d-4ce2-8f43-a9c27df34477
  • García-Martínez, Noé|||/items/35ea3f49-d77a-4740-8ca5-5bb024c9170c
  • Pla, Concepción|||/items/f9ff3ff5-c55e-4c85-83c1-f71fff810219
Rull cave is a karstic cave located in Vall d’Ebo (Alicante, Southeast of Spain) developed in massive Miocene conglomerates and Cretaceous limestones. Processes in soil above Rull cave and outdoor atmosphere directly influence the underground environment of the cave. Continuous and discrete monitoring of cave atmosphere and soil (from 2012 to 2022) allows to characterise the spatial distribution and temporal variations of the gaseous concentration (222Rn and CO2) and understand the relationship between the processes which occurred in the 3-component system (soil-cave-atmosphere). Besides the presence of visitors, Rull cave maintains stable values of mean temperature (16.2 °C) and relative humidity (97.6%). In an annual cycle the cave presents two different gaseous stages (stagnation and ventilation). Maximum average values of CO2 and 222Rn concentration are reached within the stagnation stage, in the warmest period of the year. On the contrary, in the ventilation stage (in the coldest months) the cave reaches the lowest concentrations in its inner atmosphere. For the study period, daily average CO2 and 222Rn concentrations are 2008 ppm and 1745 Bq/m3, respectively. Results show that the dynamics of 222Rn and CO2 in the cave air follow different patterns defined by the complex relationships between external and internal factors. Findings from this study provide substantial information about the environmental situation of the cave atmosphere in terms of air quality for visitors and workers.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Highly selective cathodic H2O2 electrosynthesis by a metal tellurate/carbon black composite material

  • Alemany Molina, Gabriel
  • Fernández-Catalá, Javier
  • Cao, Wei
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Fernández-Catalá, Javier|||/items/8ee681a9-afe7-4345-be73-4399b5083d34
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
One sustainable alternative to the traditional anthraquinone technology to produce H2O2 is direct H2O2 electrosynthesis by oxygen reduction reaction (ORR). However, selecting electrocatalysts is a great challenge since most of the materials present selectivity towards the formation of H2O (4-electron pathway). In this work, we present a facile electrocatalyst preparation consisting of Ni3TeO6 (NTO), a metal tellurate, mixed with carbon black (Vulcan) with outstanding selectivity (2.2 transferred electrons) towards the production of H2O2 by ORR. To test the possible real application, the NTO/Vulcan catalyst was tested in a long-term stability test showing excellent faradaic efficiency and 93.5 % of the initial current. TEM and XPS measurements after reaction show that NTO/Vulcan materials are robust and durable electrocatalysts. This work opens the door of novel materials such as metal tellurates based on Ni for their application as ORR electrocatalysts in industrial applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

High-Performance and Environmentally Friendly Electrocatalysts: Perovskite, Metal Hexacyanoferrate, and Carbon Composites for Zn-Batteries and Beyond

  • García-Rodríguez, Mario
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
La Tesis Doctoral trata sobre el desarrollo de electrocatalizadores para baterías basadas en Zn y reacciones relevantes para el medioambiente. Se estudia la síntesis, caracterización fisicoquímica y electroquímica de los electrocatalizadores, además de su aplicación en baterías Zn-aire e ion-Zn. En concreto, se han desarrollado materiales compuestos formados por óxidos métalicos del tipo perovskita (de fórmula ABO3) (mediante diferentes métodos de síntesis modificando la relación de los cationes A y B) y materiales carbonosos. Se ha puesto especial énfasis en estudiar la interacción entre ambos componentes, clave en la actividad electrocatalítica final. La mezcla de ambos componentes mediante mecanoquímica, supone la manera más idónea de las estudiadas (hidrotermal, tratamiento térmico y mortero). Seguidamente, se ha desarrollado una síntesis in-situ donde el material carbonoso se genera en el momento de la síntesis sol-gel, obteniendo resultados extraordinarios en términos de electroactividad y estabilidad en la batería Zn-aire. También, se ha estudiado cuál es la causa de la degradación del cátodo en las baterías Zn-aire en la interfase electrocatalizador-capa difusora de carbón a partir de técnicas microscópicas acoplado a un sistema de iones focalizados. Por otro lado, se ha desarrollado un método de síntesis verde de óxidos metálicos de perovskita mediante mecanoquímica, libre de disolventes, siguiendo los parámetros medioambientales de la química verde. Los hexacianoferratos metálicos de zinc mezclados con el material carbonoso en el molino de bolas han sido empleados en la batería ion-Zn obteniendo resultados mejorados que sus homólogos sin material carbonoso y sin molienda. Finalmente, óxidos metálicos del tipo perovskita han sido empleados como electrocatalizadores selectivos hacia la formación de amoníaco (molécula clave para la implantación del hidrógeno como vector energético) en la reducción electroquímica de nitratos.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Efficient and cost-effective ORR electrocatalysts based on low content transition metals highly dispersed on C3N4/super-activated carbon composites

  • Alemany Molina, Gabriel
  • Quílez-Bermejo, Javier
  • Navlani-García, Miriam
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
Oxygen reduction reaction (ORR) is one of the most important electrochemical reactions for fuel cells. However, commercial Pt-based catalysts used have important limitations such as their deactivation by carbon monoxide and Pt scarcity. In the present work, small and highly-dispersed copper and iron clusters were anchored onto composite supports based on carbon nitride (C3N4) nanostructures and a highly porous carbon material. Catalysts with a moderate carbon nitride content showed an interesting catalytic behaviour because of the combination of the metallic active sites and the availability of micropores, which play an active role in ORR. The presence of either Fe or Cu in the synthesis affected the structure of the resulting composite materials, as well as their electrocatalytic activity. Copper-based materials showed superior catalytic activity, which is supported by the information obtained from the evaluation of the system using DFT computational calculations.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Acute effect of complexity in basketball on cognitive capacity

  • Gutiérrez-Capote, Alejandro
  • Madinabeitia, Iker
  • Alarcón, Francisco
  • Torre, Elisa
  • Jiménez-Martínez, Jesús
  • Cárdenas, David
  • Alarcón, Francisco|||/items/c9b90a86-f5c9-47b2-86ac-474876c3d050
  • Madinabeitia, Iker|||/items/700b2328-8459-463c-9f8e-6926d09cd8d3
Background: Executive functions, notably inhibition, significantly influence decision-making and behavioral regulation in team sports. However, more research must be conducted on individual player characteristics such as experience and motor skills. This study assessed how accumulated practical experience moderates inhibition in response to varying task difficulty levels. Methods: Forty-four university students (age: 20.36 ± 3.13 years) participated in this study with two sessions: one followed standard 1 × 1 basketball rules (“Regular Practice”), while the other imposed motor, temporal, and spatial restrictions (“Restriction Practice”). Functional difficulty was controlled by grouping pairs with similar skill levels. Flanker and Go-Nogo tasks were used. Results: Increasing complexity worsened cognitive performance (inhibition). “Restriction Practice” showed a significantly slower and less accurate performance in both tests than “Regular Practice” (p < 0.001). Experience positively impacted test speed and accuracy (p < 0.001). Conclusion: In sports, acute cognitive impacts are intrinsically linked to the task’s complexity and the athlete’s cognitive resources. In this sense, it is essential to adjust individually the cognitive demands of the tasks, considering each athlete’s specific cognitive abilities and capacities.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

On Steam-Driven Thermal Anomalies at Active Volcanoes Through Laboratory and Numerical Experiments

  • García-Martínez, Noé
  • Girona, Társilo
  • Benavente, David
  • García-Martínez, Noé|||/items/35ea3f49-d77a-4740-8ca5-5bb024c9170c
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
At active magmatic-hydrothermal systems, volatile circulation and surface thermal anomalies are known to be related. However, the specific interconnections between permeable gas flow, H2O condensation, and heat transport remain poorly understood. This study investigates the potential of steam released from boiling aquifers to generate surface thermal anomalies. Novel laboratory experiments were conducted by injecting hot steam into a permeable material to examine how material characteristics and flow dynamics affect heat propagation. The experimental results are analyzed using numerical models based on heat conduction (CM) and a combination of heat conduction and advection (CAM) to provide a reference for extending laboratory knowledge to natural volcanic systems. Laboratory results include: (a) steam-driven thermal anomalies are more sensitive to changes in flow rates than variations in steam temperature; (b) condensation depth significantly affects the surface thermal response, with shallower condensation resulting in earlier detection; and (c) a low initial water content in the medium drastically reduces the detection time, while further increase in water content have minimal effect. The CAM model fits experimental results better than the CM, suggesting that non-condensed vapor flows through the surface at active volcanoes. A thermal anomaly of 1 K is estimated to appear at the surface approximately 0.7–120 years after degassing begins in the underlying hydrothermal system. The emergence of these anomalies depends on crust permeability, thermal properties, steam flow dynamics, and hydrothermal system depth. Quantifying these parameters is crucial, as they influence the detection of thermal anomalies, a key precursor to volcanic eruptions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enhanced electrocatalytic performance of SrMn1-xCoxO3 perovskite metal oxides for oxygen reactions in Zn-air batteries: Influence of Mn/Co ratio

  • Riquelme-García, Paula
  • García-Rodríguez, Mario
  • Flores-Lasluisa, Jhony Xavier
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Riquelme-García, Paula|||/items/eaa40ff9-6931-43ac-9865-2c13ac4a77c9
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
Metal oxides of perovskite structure and SrMn1-xCoO3 type have been prepared by a sol-gel synthesis method and mixed with carbon black by ball milling for their use as electrocatalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in a Zn-air battery. The composites obtained were characterized by different physicochemical and electrochemical techniques. The results of the characterization revealed the existence of two perovskite phases corresponding to Mn and Co as function of the Mn/Co ratio, whose interaction is related to a positive effect for the electrocatalytic activity. The presence of the M-O-C contribution was detected by XPS, which is related to an improvement in the catalytic activity against ORR/OER due to a better interaction and electron transfer between the perovskite and the carbon material. In addition, important differences were observed in the surface chemical species as a function of Mn/Co ratio and the higher the Co content in the composites the higher the amount of oxygen vacancies. The presence of oxygen vacancies is directly related to an improved OER activity; however, the presence of higher Mn content led to better catalytic results for ORR. The best electrocatalyst was studied in a Zn-air battery obtaining an excellent activity with a cyclability higher than 20 h, which is explained by the appropriate amounts of both Mn and Co.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Sustainable Approach to Overcome Polylactide Brittleness with Biobased Esters of Isosorbide and Fatty Acids

  • Miranda-Pinzon, Mario
  • Gomez-Caturla, Jaume
  • Ivorra-Martinez, Juan
  • Guijarro, Nestor
  • Marset, Xavier
  • Balart, Rafael
  • Guijarro, Nestor|||/items/c3f0ef18-dc8e-4f72-81e4-387b754804f5
  • Marset, Xavier|||/items/264458f6-b460-4a46-81f9-32bcd73610cb
This work reports on the design and synthesis of sustainable plasticizers from plant-based isosorbide to enhance the intrinsic brittleness of polylactide (PLA). To keep fully biobased carbon, isosorbide was esterified with fatty acids of varying chain length, leading to isosorbide dibutyrate (IDB), dicaprylate (IDC), and dipalmitate (IDP). These esters were incorporated into PLA at different concentrations. An approach to assess PLA-plasticizer miscibility was conducted by calculating solubility parameters (δ) and the Flory–Huggins interaction parameter, χ. The effect of plasticizer type and concentration on mechanical, thermal, and thermomechanical properties, as well as on microstructure and biodegradation, was also addressed. The results indicated that IDB and IDC notably enhanced PLA toughness, reducing the PLA’s glass transition temperature (Tg) from 60.3 to 27.7 °C with 20 wt % IDC. Consequently, strain at break dramatically increased from 12.8% (PLA) to over 300% with 20 wt % IDB or IDC. In contrast, IDP exhibited limited miscibility, resulting in phase separation, though it still improved the impact strength and ductility. All formulations demonstrated exceptional disintegration in compost soil, underscoring their potential as “double green” plasticizers suitable for PLA. Since both PLA and isosorbide can be industrially derived from starch, this work places starch as a key platform for sustainable polymers.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Electrocatalizadores basados en materiales carbonosos y metales de transición para su aplicación en la producción y uso del hidrógeno

  • Alemany Molina, Gabriel
  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
Esta Tesis Doctoral se ha enfocado en el desarrollo y caracterización de materiales carbonosos para su uso como electrocatalizadores en aplicaciones energéticas. Los catalizadores preparados presentaron diferentes propiedades texturales y diferentes heteroátomos de nitrógeno como nano-dominios de C3N4 o como grupos funcionales nitrogenados en la superficie del material carbonoso. Se estudiaron múltiples fases metálicas tales como Cu o Fe altamente dispersos, pero también aleaciones de nanopartículas de Pd o Pt con otros metales. Las reacciones estudiadas fueron la HER, OER y, especialmente, la ORR. Algunos de los estudios experimentales fueron complementados con modelado computacional para una mejor comprensión de las reacciones y de las interacciones nanopartícula-soporte. Concretamente, algunos de los aspectos de más relevancia han sido la durabilidad de los catalizadores y la tolerancia al metanol. Además, los materiales basados en Pt y Pd fueron estudiados como catalizadores para la HER y los basados en Pd como catalizadores bifuncionales ORR/OER para su aplicación en baterías Zn-aire. Finalmente, se dedica un último capítulo al estudio de la síntesis electroquímica de peróxido de hidrógeno mediante ORR.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

‘Stupid Girls’ vs. ‘Real Men’: Identity Construction and Social Media Polarization over Revenge Porn

  • Sánchez Cócera, Marta
The purpose of this paper is to explore polarization in the discourse of social media commentators over crimes of Revenge Porn. Revenge porn refers to “the nonconsensual sharing of intimate images” (Bond and Tyrrell 2021, 2166), videos, or other intimate material, which are weaponized against its victims. As with other crimes, revenge porn cases are highly discussed on social media, where users might (a) reproduce prejudice and stigma against victims or, contrarily, (b) resist victim-blaming and shaming ideologies as a form of activism and call for empathy (Garcés-Conejos Blitvich and Bou-Franch 2019; Palomino-Manjón 2022). In light of this, this paper examines the discursive construction of the phenomenon of revenge porn and the evaluations proposed of victims and perpetrators on the social network YouTube with the aim of unveiling conflicting ideologies online. To this end, the present study analyzes a corpus of 14,000 comments (ca. 411,000 words) from four different YouTube videos tackling revenge porn cases. The paper adopts a Corpus-Assisted Discourse Studies (CADS) approach (Partington et al. 2013) and uses Sketch Engine to analyze the corpus. Additionally, a more detailed analysis of evaluative resources and linguistic patterns is carried out. Results show that polarized understandings of revenge porn abound in the corpus. Specifically, victim-blaming ideologies are discursively concealed, whereas traditional ideologies regarding sex are overtly encoded. Moreover, male users affiliate with newer constructions of masculinity and dissociate from the illegal actions attributed to perpetrators. Women/victims are generally derogated for not conforming to societal views of common-sensical sexual behavior or praised for their strength in standing social judgment.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Supporting Migrants through Multilingual Communication: Insights from NGOs, La comunicación multilingüe con personas migrantes: experiencias desde las ONG

  • Jiménez-Castro, María
  • Gutiérrez-Artacho, Juncal
Language and cultural barriers, along with other factors, prevent many migrants arriving in Spain from accessing the crucial information they need to navigate their new environments. This issue is particularly pronounced in Ceuta, a Spanish enclave on the African shore, which serves as a major transit point for migrants, especially from West African countries like Ivory Coast, Cameroon, and Guinea. These migrants face unique challenges, including the inability to continue their journeys while awaiting decisions from public authorities, which places them in prolonged periods of uncertainty and vulnerability. In this context, nongovernmental organizations (NGOs) play a vital role in supporting igrants by providing essential services. However, NGOs must overcome significant linguistic, cultural, and educational barriers to effectively deliver services and information to such diverse populations. This study investigates the information needs of migrants in Ceuta through semi-structured interviews conducted with NGO staff and volunteers. These interviews explored how NGOs manage multilingual and multicultural communication and whether the information provided is appropriately adapted to the specific linguistic and cultural needs of the migrant groups they serve. The qualitative analysis highlights the critical role of translation, interpretation, and intercultural mediation in overcoming communication gaps. Findings reveal that NGOs often struggle to address these barriers due to limited access to professional translation services and often rely on ad-hoc methods or volunteers. The lack of systematic support for translation exacerbates the difficulty of ensuring migrants’ access to crucial information regarding healthcare, legal services, and social resources. Additionally, cultural differences, digital literacy gaps, and varying education levels further complicate communication. Migrants from rural areas, for instance, may only speak local languages, requiring additional adaptation of materials and methods. Overall, the study underscores the urgent need for improved professional translation and intercultural mediation resources to reduce migrants’ informational vulnerability and support their successful integration in Ceuta.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

From Satirical Cartoons to Memes: Teaching the First World War in a Visual Society – A Reflection and Response

  • Lillo-Gutierrez, Berta
  • Kempshall, Chris
  • Lillo-Gutierrez, Berta|||/items/f8c069fd-eaf6-4a70-b1ae-2c8e53e0ff52
This article reflects on the different ways of approaching cartoons in today’s history classrooms, using the links drawn between other forms of graphic humour familiar to students, such as memes. We discuss strategies that allow students to develop their critical reasoning skills, in ways that are applicable both to the understanding of the First World War and to the global and digital world in which they live. Using caricatures created in Spain during the First World War, we address how the cartoons reflected the country’s complex position in the war, marked by its official neutrality and the social fracture between supporters of the Allies and those of the Central Empires. The satirical designs form a window through which to explore both the mechanisms of representation used to portray ‘enemies’, along with tactics of a transnational nature such as animalisation or the use of racist stereotypes. We also explore the ongoing debates regarding the survival of these constructions today, especially in the context of current war, linked to changes in the forms of transmission generated by the rise of social media. Therefore, we examine the problem of humour, understood as a social creation that changes over time, in historical sources and current societies, as well as the role of the teacher in guiding the complex process of analysing satirical vignettes. We consider the potential impact of new technologies such as GenAI in education and their possible interaction with learning methodologies that rely on caricature as a historical source. The response to this piece focuses on the different ways that understanding and utilising humour can be useful in teaching spaces. It explores the use of ‘historical meme assignments’ as an avenue of engaging student understanding and interests through inventive assessment activities. It also examines how contextualising humour is an important way of understanding mindsets from the past and the ways in which people viewed, processed, and understood the world around them. It also looks to frame the tensions between human or user generated humour and cartoons against those which can be created by online GenAI software. Jokes and comedy are inherently human but by attempting to replicate it through GenAI there is the danger of creating material based on racist stereotypes that have permeated online spaces. Whilst the response to this piece features student assignments to create cartoons and memes, it also raises warning flags for teachers regarding what GenAI generated versions of this may look like.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

La imagen social de las artistas durante el franquismo: una cuestión de género

  • Barreno García, Irene
Este trabajo es resultado de una ayuda del Ministerio de Universidades (FPU20/06726) para realizar una tesis doctoral bajo la dirección de Miguel Cabañas Bravo y Mónica Carabias Álvaro, y se inserta en el marco del Proyecto de Investigación I+D+i Rostros y rastros en las identidades del arte del franquismo y el exilio (PGC, MICINN-AEI, Ref: PID2019-109271GB-I00), Peer reviewed