Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 193
Encontrada(s) 2 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Identifying Changes in Peripheral Lymphocyte Subpopulations in Adult Onset Type 1 Diabetes

  • Teniente Serra, Aina|||0000-0003-3440-804X
  • Pizarro, Eduarda
  • Quirant, Bibiana|||0000-0002-3875-8074
  • Fernández, Marco A.|||0000-0002-3921-2209
  • Vives Pi, Marta|||0000-0003-3735-0779
  • Martínez Cáceres, Eva María|||0000-0002-6762-8025
T- and B-lymphocytes play an important role in the pathogenesis of type 1 diabetes (T1D), a chronic disease caused by the autoimmune destruction of the insulin-producing cells in the pancreatic islets. Flow cytometry allows their characterization in peripheral blood, letting to investigate changes in cellular subpopulations that can provide insights in T1D pathophysiology. With this purpose, CD4 + and CD8 + T cells (including naïve, central memory, effector memory and terminally differentiated effector (TEMRA), Th17 and Tregs) and B cells subsets (naïve, unswitched memory, switched memory and transitional B cells) were analysed in peripheral blood of adult T1D patients at disease onset and after ≥2 years using multiparametric flow cytometry. Here we report changes in the percentage of early and late effector memory CD4 + and CD8 + T cells as well as of naïve subsets, regulatory T cells and transitional B cells in peripheral blood of adult patients at onset of T1D when compared with HD. After 2 years follow-up these changes were maintained. Also, we found a decrease in percentage of Th17 and numbers of T cells with baseline. In order to identify potential biomarkers of disease, ROC curves were performed being late EM CD4 T cell subset the most promising candidate. In conclusion, the observed changes in the percentage and/or absolute number of lymphocyte subpopulations of adult T1D patients support the hypothesis that effector cells migrate to the pancreas and this autoimmune process perseveres along the disease. Moreover, multiparametric flow allows to identify those subsets with potential to be considered biomarkers of disease.
Repisalud
Publicación Artículo científico (JournalArticle)

Viridans group streptococci are donors in horizontal transfer of topoisomerase IV genes to Streptococcus pneumoniae

  • Balsalobre-Arenas, Maria Luz
  • Ferrandiz-Avellano, Maria-Jose
  • Liñares, Josefina
  • Tubau, Fe
  • de la Campa, Adela G
A total of 46 ciprofloxacin-resistant (Cip(r)) Streptococcus pneumoniae strains were isolated from 1991 to 2001 at the Hospital of Bellvitge. Five of these strains showed unexpectedly high rates of nucleotide variations in the quinolone resistance-determining regions (QRDRs) of their parC, parE, and gyrA genes. The nucleotide sequence of the full-length parC, parE, and gyrA genes of one of these isolates revealed a mosaic structure compatible with an interspecific recombination origin. Southern blot analysis and nucleotide sequence determinations showed the presence of an ant-like gene in the intergenic parE-parC regions of the S. pneumoniae Cip(r) isolates with high rates of variations in their parE and parC QRDRs. The ant-like gene was absent from typical S. pneumoniae strains, whereas it was present in the intergenic parE-parC regions of the viridans group streptococci (Streptococcus mitis and Streptococcus oralis). These results suggest that the viridans group streptococci are acting as donors in the horizontal transfer of fluoroquinolone resistance genes to S. pneumoniae.
Repisalud
Publicación Artículo científico (JournalArticle)

Fluoroquinolone Resistance in Penicillin-resistantStreptococcus pneumoniaeClones, Spain

  • de la Campa, Adela G
  • Balsalobre-Arenas, Maria Luz
  • Ardanuy, Carmen
  • Fenoll, Asuncion
  • Pérez-Trallero, Emilio
  • Liñares, Josefina
Among 2,882 Streptococcus pneumoniae sent to the Spanish Reference Laboratory during 2002, 75 (2.6%) were ciprofloxacin-resistant. Resistance was associated with older patients (3.9% in adults and 7.2% in patients > or =65 years of age), with isolation from noninvasive sites (4.3% vs. 1.0%), and with penicillin and macrolide resistance. Among 14 low-level resistant (MIC 4-8 microg/mL) strains, 1 had a fluoroquinolone efflux phenotype, and 13 showed single ParC changes. The 61 high-level ciprofloxacin-resistant (MIC > or =16 microg/mL) strains showed either two or three changes at ParC, ParE, and GyrA. Resistance was acquired either by point mutation (70 strains) or by recombination with viridans streptococci (4 strains) at the topoisomerase II genes. Although 36 pulsed-field gel electrophoresis patterns were observed, 5 international multiresistant clones (Spain23F-1, Spain6B-2, Spain9V-3, Spain14-5 and Sweden15A-25) accounted for 35 (46.7%) of the ciprofloxacin-resistant strains. Continuous surveillance is needed to prevent the dissemination of these clones.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pbca-Type In2O3: the high-pressure post-corundum phase at room temperature

  • García-Domene, B.
  • Sans Tresserras, Juan Ángel
  • Gomis, O.
  • Ortiz, H. M.
  • Errandonea, Daniel
  • Santamaría Pérez, David
  • Martinez-Garcia, D.
  • Pereira, A. L. J.
  • Morales-Garcia, A.
  • Rodríguez Hernández, Plácida
  • Muñoz, Alfonso
  • Popescu, Catalin
  • Segura, A.
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
  • Vilaplana Cerda, Rosario Isabel|||0000-0003-0504-2157
High-pressure powder X-ray diffraction and Raman scattering measurements in cubic bixbyite-type indium oxide (c-In2O3) have been performed at room temperature. On increasing pressure c-In2O3 undergoes a transition to the Rh2O3-II structure but on decreasing pressure Rh2O3-II-type In2O3 undergoes a transition to a previously unknown phase with Pbca space group which is isostructural to Rh2O3-III. On further decrease of pressure, we observed a phase transition to the metastable corundum-type In2O3 near room conditions. Recompression of the metastable corundum-type In2O3 at room temperature leads to a transition to the Rh2O3-III phase, thus showing that the Rh2O3-III phase is the post-corundum phase at room temperature. Our results are supported by theoretical ab initio calculations. Furthermore, they show that the Rh2O3-III phase could be present in other sesquioxides, thus prompting to a revision of the pressure-temperature phase diagrams of sesquioxides, Financial support by the Spanish MEC under Grant No. MAT2010-21270-C04-01/03/04, MAT2013-46649-C4-1/2/3-P, by MALTA Consolider Ingenio 2010 project (CSD2007-00045) and by Generalitat Valenciana (GVA-ACOMP-2013-012). Red Espanola de Supercomputacion (RES) and ALBA Synchrotron Light Source are also acknowledged. B.G.-D. and J.A.S. acknowledge financial support through the FPI program and Juan de la Cierva fellowship, respectively. We also thank J. L. Jorda for fruitful discussions. A.L.J.P. acknowledges financial support through Brazilian CNPq. A.S. expresses thanks to FEDER Grant UNLV10-3E-1253 for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Manufacturing tolerance analysis of an MMI-Based 90 degrees optical hybrid for InP integrated coherent receivers

  • Sánchez Fandiño, Javier Antonio
  • P. Muñoz|||0000-0001-6026-1649
[EN] A numerical study of the impact that manufacturing tolerances have on the performance of an InP 4 × 4 MMI working as a 90° optical hybrid is presented, including simultaneous variations of width, thickness, and refractive index over the C and L bands. Simulation results for different figures of merit, such as optical common-mode rejection ratios (CMRRs) and phase errors, are provided for both nominal and worst case scenarios. Additionally, system simulations are performed to compute imbalance-induced power penalty. Our results indicate that the combined effect of realistic foundry tolerances on device performance is significant. In particular, a fourfold reduction is predicted between nominal (≃40 nm) and worst cases (≃10 nm) when optical CMRRs and phase errors are compared against Optical Internetworking Forum specifications. By contrast, a much greater bandwidth is expected at the system level (≥ 40 nm) if a power penalty of less than 1 dB (@BER = 10-3) is to be allowed. In fact, worst case power penalties lower than 0.25 dB are predicted over the full C band, which further proves the great potential of integrated 4 × 4 MMIs as wide-bandwidth devices for mass production of coherent receivers using state-of-the-art integration technologies., This work was supported in part by the Spanish MICINN Project TEC2010-21337, acronym ATOMIC, and in part by projects FEDER UPVOV10-3E-492 and UPVOV08-3E-008. The work of J. S. Fandin˜o was supported by Grant FPU-2010 (ref: AP2010-1595). The authors are also grateful to the EuroPIC consortium (FP7 funded programme NMP 228839-2) for access to the design manual and design toolkit of the generic InP fab.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Scalable UWB photonic generator based on the combination of doublet pulses

  • Moreno, Vanessa
  • Rius Mercado, Manuel
  • Muriel, Miguel A.
  • Mora Almerich, José|||0000-0002-2877-4118
  • Capmany Francoy, José|||0000-0002-6460-4167
We propose and experimentally demonstrate a scalable and reconfigurable optical scheme to generate high order UWB pulses. Firstly, various ultra wideband doublets are created through a process of phase-to-intensity conversion by means of a phase modulation and a dispersive media. In a second stage, doublets are combined in an optical processing unit that allows the reconfiguration of UWB high order pulses. Experimental results both in time and frequency domains are presented showing good performance related to the fractional bandwidth and spectral efficiency parameters., The research leading to these results has been funded by the national project TEC2010-21303-C04-02 and TEC2011-26642 funded by the Ministerio de Economia y Competitividad and the projects FEDER UPVOV08-3E-008 and UPVOV10-3E-492. Also, the authors wish to acknowledge the financial support given by the Generalitat Valenciana under the Research Excellency Award Program GVA PROMETEO 2013/012 Next Generation Microwave Photonic technologies.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Reconfigurable lattice mesh designs for programmable photonic processors

  • Pérez-López, Daniel
  • Soref, Richard A.
  • Gasulla Mestre, Ivana|||0000-0001-8088-7796
  • Capmany Francoy, José|||0000-0002-6460-4167
[EN] We propose and analyse two novel mesh design geometries for the implementation of tunable optical cores in programmable photonic processors. These geometries are the hexagonal and the triangular lattice. They are compared here to a previously proposed square mesh topology in terms of a series of figures of merit that account for metrics that are relevant to on-chip integration of the mesh. We find that that the hexagonal mesh is the most suitable option of the three considered for the implementation of the reconfigurable optical core in the programmable processor., The authors wish to acknowledge the financial support given by the Research Excellency Award Program GVA PROMETEO II/2013/012, Spanish MINECO projects TEC2013-42332-P PIF4ESP, TEC2015-69787-REDT PIC4TB and TEC2014-60378-C2-1-R MEMES, as well as the projects FEDER UPVOV 10-3E-492 and FEDER UPVOV 08-3E-008. The work of D. Perez was supported by the FPI-UPV Grant Program from the Universitat Politecnica de Valencia and the work of I. Gasulla was supported by the Spanish MINECO through the Ramon y Cajal Program. R. Soref is supported by the Air Force Office of Scientific Research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis de maestría (MasterThesis)

Análisis de señales ECG/BSPM para la identificación de las frecuencias de activación de regiones auriculares durante Fibrilación Auricular, Analysis of ECG/BSPM signals for the identification of activation frequencies of atrial regions during Atrial Fibrillation., Anàlisi de senyals ECG/BSPM per a la identificació de les freqüències d&apos, activació de regions auriculars durant Fibril·lació Auricular.

  • Luis Moura, Duna de
[ES] La fibrilación auricular (FA) es la arritmia cardíaca más prevalente, afectando al 2% de la población general, desencadenando notables implicaciones tanto en el ámbito sanitario como en el económico. A pesar de su marcada incidencia, los mecanismos subyacentes que provocan esta condición aún no se comprenden en su totalidad, lo que contribuye a resultados terapéuticos subóptimos, múltiples intentos de tratamiento y cargas económicas y de salud significativas [Tilz et al. 2012]. Aunque se han registrado avances en las terapias farmacológicas y la ablación con catéter, las limitaciones persisten, evidenciadas por tasas de éxito variables y demoras sustanciales en la identificación de la opción farmacológica óptima [Hindricks et al. 2020]. La ablación con catéter en las venas pulmonares, si bien eficaz para pacientes sintomáticos, a menudo requiere intervenciones adicionales. La toma de decisiones relacionada con la ablación sigue siendo subjetiva, con retrasos frecuentes, especialmente para mujeres y minorías, a pesar de la presentación de síntomas más graves [Fuster et al. 2006, Cochet et al. 2014]. El propósito principal de este trabajo es abordar la problemática existente mediante la identificación no invasiva de las regiones cardíacas con frecuencias dominantes para la ablación en pacientes con FA. Para ello, se cuenta con una base de datos que incluye registros de 47 pacientes provenientes del Hospital Gregorio Marañón en Madrid y del Hospital de Stanford en California. Cada paciente ha sido sometido a un Mapeo Potencial de Superficie Cardíaca (BSPM, por sus siglas en inglés) y a un Electrograma Intracardíaco (EGM) obtenido de forma invasiva mediante catéteres. La técnica BSPM permite la captura de señales cardíacas de manera no invasiva desde la superficie del cuerpo, mientras que el EGM se registra de manera invasiva durante la intervención empleando catéteres intraauriculares de tipo basket. La simultaneidad en la adquisición de ambos tipos de registros proporciona la base para desarrollar un modelo de aprendizaje automatizado que permita obtener una representación precisa de la señal EGM a partir de la BSPM [Pedrón-Torrecilla, et al. 2016]. La innovación clave de este enfoque radica en abordar el problema inverso de la cardiología, que consiste fundamentalmente en obtener una aproximación de la señal EGM a partir de la señal BSPM. Esta estrategia se enfoca en detectar de manera no invasiva las regiones auriculares de mayor frecuencia de activación durante la FA, que podrían constituir focos potenciales para la ablación destinada a tratar y eliminar la patología en el paciente. La estrategia propuesta para abordar el problema inverso implica calcular el ciclo de activación auricular (CL) mediante métodos de autocorrelación y aprendizaje automatizado [Rodrigo, et al. 2021]. En este sentido, se llevará a cabo un análisis de las señales registradas por la prueba de BSPM que permita determinar el CL auricular, utilizando técnicas de correlación y correlación con patrones múltiples. Buscando optimizar el método de análisis del BSPM mediante la comparación con el estándar de oro representado por los CL de los EGM intracardiacos obtenidos simultáneamente. Para establecer una correspondencia precisa entre el CL de las regiones auriculares y las mediciones del BSPM, se aplicarán técnicas de análisis de correspondencia y aprendizaje automático. Este enfoque permitirá no solo identificar las áreas críticas para la ablación, sino también personalizar la terapia de manera eficaz y precisa. Finalmente, se buscará determinar la distribución óptima y el número adecuado de electrodos en el BSPM con el objetivo de lograr una reconstrucción óptima de las señales con la mínima cantidad posible de electrodos, contribuyendo así a mejorar la calidad de la información recopilada [Rodrigo et al., 2017]. Este enfoque integral busca proporcionar una base sólida para la planificación de la terapia personalizada en pacientes con FA, con el potencial, [EN] Atrial fibrillation (AF) is the most prevalent cardiac arrhythmia, affecting 2% of the general population, triggering notable implications in both the health and economic fields. Despite its marked incidence, the underlying mechanisms causing this condition are not yet fully understood, contributing to suboptimal therapeutic outcomes, multiple treatment attempts, and significant health and economic burdens [Tilz et al. 2012]. Although there have been advances in pharmacological therapies and catheter ablation, limitations remain, evidenced by variable success rates and substantial delays in identifying the optimal pharmacological option [Hindricks et al. 2020]. Pulmonary vein catheter ablation, while effective for symptomatic patients, often requires additional interventions. Decision-making related to ablation remains subjective, with frequent delays, especially for women and minorities, despite the presentation of more severe symptoms [Fuster et al. 2006, Cochet et al. 2014]. The main purpose of this work is to address the existing problem by non-invasively identifying cardiac regions with dominant frequencies for ablation in patients with AF. To do this, there is a database that includes records of 47 patients from the Gregorio Marañón Hospital in Madrid and the Stanford Hospital in California. Each patient has undergone Cardiac Surface Potential Mapping (BSPM) and an Intracardiac Electrogram (EGM) obtained invasively through catheters. The BSPM technique allows the capture of cardiac signals non-invasively from the surface of the body, while the EGM is recorded invasively during the intervention using basket-type intra-atrial catheters. The simultaneity in the acquisition of both types of records provides the basis for developing an automated learning model that allows obtaining an accurate representation of the EGM signal from the BSPM [Pedrón-Torrecilla, et al. 2016]. The key innovation of this approach lies in addressing the inverse problem of cardiology, which essentially consists of obtaining an approximation of the EGM signal from the BSPM signal. This strategy focuses on non-invasively detecting the atrial regions with the highest activation frequency during AF, which could constitute potential foci for ablation aimed at treating and eliminating the pathology in the patient. The proposed strategy to address the inverse problem involves calculating the atrial firing cycle (CL) using autocorrelation and machine learning methods [Rodrigo, et al. 2021]. In this sense, an analysis of the signals recorded by the BSPM test will be carried out to determine the atrial CL, using correlation and correlation techniques with multiple patterns. Seeking to optimize the BSPM analysis method by comparing it with the gold standard represented by the CL of intracardiac EGMs obtained simultaneously. To establish an accurate correspondence between the CL of the auricular regions and the BSPM measurements, correspondence analysis and machine learning techniques will be applied. This approach will allow not only to identify critical areas for ablation, but also to personalize therapy effectively and precisely. Finally, we will seek to determine the optimal distribution and the appropriate number of electrodes in the BSPM with the objective of achieving an optimal reconstruction of the signals with the minimum possible number of electrodes, thus contributing to improving the quality of the information collected [Rodrigo et al ., 2017]. This comprehensive approach seeks to provide a solid foundation for personalized therapy planning in patients with AF, with the potential to significantly improve clinical outcomes.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

UWB Monocycle Generator Based on the Non-Linear Effects of an SOA-Integrated Structure

  • Moreno, Vanessa
  • Rius Mercado, Manuel
  • Muriel, Miguel A.
  • Mora Almerich, José|||0000-0002-2877-4118
  • Capmany Francoy, José|||0000-0002-6460-4167
In this paper, we propose and experimentally demonstrate a novel and single structure to generate ultra-wideband pulses by means of the cross-phase modulation present in a semiconductor optical amplifier unified structure. The key components of this system is an integrated Mach-Zehnder interferometer with two SOAs and an optical processing unit. The fusion of these two components permits the generation and customization of UWB monocycle pulses. The polarity of the output pulses is easily modified through the single selection of a specific input port. Moreover, the capacity of transmitting several data sequences is demonstrated and the potentiality to adapt the system to different modulation formats is analyzed., This work was supported in part by the National Project under Grants TEC2010-21303-C04-02 and TEC2011-26642, through the Ministerio de Economia y Competitividad; in part by the FEDER under Projects UPVOV08-3E-008 and UPVOV10-3E-492; in part by the Generalitat Valenciana through the Research Excellency Award Program GVA PROMETEO under Grant 2013/012, Next Generation Microwave Photonic technologies.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficiency Analysis of a Truncated Flip-FBMC in Burst Optical Transmission

  • Bahaaelden, Mohammed S.
  • Pérez-Jiménez, Rafael
  • Renfors, Markku
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] A novel Flip-filter bank multicarrier (Flip-FBMC)-based transmultiplexer (TMUX) with offset quadrature amplitude modulation is proposed to enhance the transmission performance compared to a conventional Flip-OFDM system. Moreover, the possibility to reduce the TMUX response (latency) and increase spectral efficiency is investigated for the first time through a tail shortening method. The proposed design is based on a biorthogonal form for visible light communication (VLC) to increase the flexibility of design requirements. However, spectral efficiency suffers from the ramp-up and the ramp-down at the beginning and end, respectively, of a data burst. Hence, as a penalty, Flip-FBMC imposes 9 more symbols than a Flip-OFDM packet and two factors compared to a DCO-FBMC burst. Hard truncation of the lowest energy tail minimizes latency and limits the system penalty to 2.5 symbols, which is lower than that of DCO-FBCM by 2 symbols. The results show that the prototype filter of the Heisenberg factor ( ¿1 ) is highly effective in reducing the energy loss of truncated tails and reduces the symbol error rate (SER). The Flip-FBMC gain over a direct line-of-sight VLC channel is analyzed, and the channel estimation of a truncated burst, which is based on the interference approximation method (IAM) of IAM-C type, exhibits a superior performance of 1.5 dB at 10 ¿3 SER over the IAM-R method and 1 dB at 10 ¿5 SNR over a cyclic prefix of 1 point Flip-OFDM. On the other hand, the analysis reveals that IAM-C is slightly impacted by the truncated burst compared to the nontruncated version., This work was supported in part by the Research Agency under Project RTI2018-101658-B-I00 and Project TEC2017-84065-C3-1-R, in part by the European Cooperation in Science and Technology COST Action "European Network on Future Generation Optical Wireless Communication Technologies (NEWFOCUS)'' under Grant CA19111, and in part by Generalitat Valenciana under Grant PROMETEO 2017/103.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Integrated optical frequency domain reflectometry device for characterization of complex integrated devices

  • Bru-Orgiles, Luis Alberto
  • Pastor Abellán, Daniel|||0000-0002-5297-3918
  • P. Muñoz|||0000-0001-6026-1649
[EN] Because of the demand for advanced measurement systems in the field of modern photonic integrated circuits, optical frequency domain reflectometry (OFDR) is a robust technique for characterizing design-to-fabrication deviations. In this paper we report an OFDR device where the interferometric part is monolithically integrated along with the device under test. We discuss the advantages in terms of compactness and performance, and the importance of the incorporated dispersion de-embedding mechanism. Experimental validation is carried out by interrogating an arrayed waveguide grating on a silicon nitride platform. The results establish the proposed device as a first step in the quest for a universal test structure for integrated devices. (c) 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement, Spanish national projects, Ministerio de Economia y Competitividad (TEC2015-69787-REDT PIC4TB, TEC2016-80385-P SINXPECT, PTA2015-11309-I); Generalitat Valenciana (GVA PROMETEO 2017/103).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A monolithic integrated photonic microwave filter

  • Sanchez Fandiño, Javier Antonio
  • Doménech Gómez, José David
  • P. Muñoz|||0000-0001-6026-1649
  • Capmany Francoy, José|||0000-0002-6460-4167
[EN] Meeting the increasing demand for capacity in wireless networks requires the harnessing of higher regions in the radiofrequency spectrum, reducing cell size, as well as more compact, agile and power-efficient base stations that are capable of smoothly interfacing the radio and fibre segments. Fully functional microwave photonic chips are promising candidates in attempts to meet these goals. In recent years, many integrated microwave photonic chips have been reported in different technologies. To the best of our knowledge, none has monolithically integrated all the main active and passive optoelectronic components. Here, we report the first demonstration of a tunable microwave photonics filter that is monolithically integrated into an indium phosphide chip. The reconfigurable radiofrequency photonic filter includes all the necessary elements (for example, lasers, modulators and photodetectors), and its response can be tuned by means of control electric currents. This is an important step in demonstrating the feasibility of integrated and programmable microwave photonic processors., The authors acknowledge financial support from the Spanish Centro para el Desarrollo Tecnologico Industrial (CDTI) through the NEOTEC start-up programme, the European Commission through the 7th Research Framework Programme project, Photonic Advanced Research and Development for Integrated Generic Manufacturing (FP7-PARADIGM), the Generalitat Valenciana through the Programa para grupos de Investigacion de Excelencia (PROMETEO) project code 2013/012, the Spanish Ministerio de Economia y Comercio (MINECO) via project TEC2013-42332-P, PIF4ESP, and the Unwersitat Politecnica de Valencia (UPVOV) through projects 10-3E-492 and 08-3E-008 funded by the Fondos Europeos de Desarrollo Regional (FEDER). J.S. Fandino acknowledges financial support from Formacion de Profesorado Universitario (FPU) grant AP2010-1595.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Chemosterilants as control agents of Ceratitis capitata (Wiedemann) (Diptera: Tephritidae) in field trials

  • Navarro-Llopis, Vicente|||0000-0003-3030-3304
  • Sanchis Cabanes, Juan|||0000-0002-6831-7296
  • Primo Millo, Jaime|||0000-0003-2254-8184
  • Primo Yufera, Eduardo
[EN] Lufenuron is a chitin synthesis inhibitor, which is able to impede Mediterranean fruit fly, Ceratitis capitata (Wiedemann), reproduction. In laboratory trials, following ingestion of lufenuron, the eggs laid by female Ceratitis capitata were prevented from hatching. In field trials in Valencia, Spain, lufenuron showed its effectiveness by reducing C. capitata wild populations and its continuous application to several generations of fruit fly resulted in increased pest control. This field trial was conducted in an isolated valley some 80ha in size, over a continuous four-year period. In order to maintain the sterilizing effect in the field throughout the whole year, a new lufenuron bait gel was developed. This bait gel was introduced in to delta traps suspended in trees at a density of 24 traps ha 1, and these traps were replaced once a year during the field trial. Monitoring of the adult C. capitata population was conducted to assess the effects of the chemosterilant treatment. In the first year of treatment with sterilizing traps, a reduction of the C. capitata population was observed, indicating that the traps reduce the population right from the first generation. In the second, third and fourth years, a continuous and progressive reduction of the adult Mediterranean fruit fly population was observed. Therefore, the successive application of chemosterilization treatment has a cumulative effect on reducing the fly population year after year. Aerial treatment using malathion does not produce this cumulative effect, and consequently every year it is necessary to start again with the same number of flies as the year before. The possibility of using the chemosterilant method alone or combined with the sterile insect technique is discussed., The authors thank Stephen Skillman for helpful suggestions on the first version of the manuscript, Syngenta for supplying technical grade lufenuron, and the R&D+i Linguistic Assistance Office at the Universidad Politécnica de Valencia for their help in revising and correcting this paper. This research has been supported by ‘Fundación José y Ana Royo’, ‘Conselleria d’Agricultura Peixca i Alimentacio-GVA’ and INIA project number RTA03-103-C6.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Promoting Sustainable and Intelligent Freight Transportation Systems in the Barcelona Metropolitan Area

  • Calvet, Laura
  • Alvarez-Palau, Eduard J.
  • Viu, Marta
  • Castillo, Cristian
  • Copado, Pedro
  • Juan, Angel A.|||0000-0003-1392-1776
[EN] The growth of e-commerce and the on-demand economy in urban and metropolitan areas has been accelerated by the recent COVID-19 pandemic. As a consequence, logistics and transportation operators are subject to a noticeable pressure to develop efficient delivery systems. These systems are also influenced by the global trend towards more sustainable transportation and mobility, which implies changes in urban policies and technological innovations ¿e.g., the substitution of traditional diesel petrol-drive vehicles by electric ones. This paper analyzes the current and predicted needs of logistics operators in the Barcelona metropolitan area. To do so, urban regulations are analyzed and key shareholders are interviewed. The analysis of these interviews promote a discussion on how the use of new `agile¿ optimization algorithms ¿which are based on the combination of biased-randomized heuristics, computer parallelization techniques, and IoT / 5G technologies¿ can contribute to enhance urban distribution practices. Finally, we present a case study in which the effect of different configurations of working/resting times and parking areas availability on routing solutions is studied. Our research aims to provide comprehensive knowledge to managers and policy-makers, and to offer them with powerful tools capable of generating real-time solutions to complex last-mile delivery challenges under dynamic conditions., This work has been partially supported by the Spanish Ministry of Science (PID2019-111100RB-C21 / AEI / 10.13039/501100011033, RED2018-102642-T), and the Erasmus+ Program (2019-I-ES01-KA103-062602). We also thank the entities that accepted to be interviewed during the development of this study.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Refractive Index and Temperature Sensing Using Inter-Core Crosstalk in Multicore Fibers

  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] Multicore optical fibers are of great interest in the optical sensing field. Their core diversity and spatial distribution enable the development of sensing mechanisms that are not possible in single-core fibers. In this paper, we study the use of the inter-core crosstalk phenomena for the implementation of a surrounding refractive index (SRI) sensor. The selective inscription of a tilted fiber Bragg grating (TFBG) intentionally increases the inter-core crosstalk between the inscribed cores and makes it sensitive to the SRI. With this technique we simplify the measurement of the SRI and improve the identification and tracking of the excited cladding modes, as compared with the analysis of the transmission spectrum of a TFBG in single-core fibers. The proposed device is also sensitive to temperature. Temperature is obtained from the crosstalk wavelength shift with a measured sensitivity of 9.75 pm/degrees C. The SRI is obtained from the measurement of the crosstalk optical power. For increasing SRIs the cladding modes gradually fade, reducing the crosstalk optical power. We observed that the higher the tilt, the higher the sensor sensitivity. For a 7 degrees TFBG the SRI sensitivity obtained is -74.2 dB/RIU from 1.31 to 1.39 and -250.8 dB/RIU from 1.39 to 1.44., This work was supported in part by the Spanish Ministry of Economy and Competitiveness under the DIMENSION TEC2017 88029-R Project and in part by the Generalitat Valenciana by PROMETEO 2017/103 research excellency award and IDI/FEDER/2018 GVA Infraestructura. The work of J. Madrigal was supported by Universitat Politecnica de Valencia scholarship PAID-01-18. The work of D. Barrera was supported by Spanish MICINN fellowship IJCI-2017-32476.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A pospiviroid from symptomless portulaca plants closely related to iresine viroid 1

  • Verhoeven, J.TH J.
  • Roenhorst, JW
  • Hooftman, M
  • Meekes, E.T.M.
  • Flores Pedauye, Ricardo
  • SERRA ALFONSO, PEDRO
[EN] In symptomless plants of portulaca a potential new pospiviroid was characterized. Analysis by both double and return PAGE showed the presence of a circular RNA. RT-PCR and sequencing revealed a genome of 351 nt with properties characteristic of members of the genus Pospiviroid and with highest sequence identity (circa 80%) with iresine viroid 1 (IrVd-1). The circular RNA from portulaca was shown to replicate independently in its original host, thus showing that it is indeed a viroid. Based on its molecular characteristics, it should be considered a new species. However, since no biological differences have yet been found with its closest relative IrVd-1, the viroid from portulaca does not fulfil all criteria for species demarcation of the ICTV. © 2015 Elsevier B.V. All rights reserved., Work in R.F. laboratory has been funded by grants BFU2011-28443 and BFU2014-56812-P from Ministerio de Economia y Competititvidad (MINECO, Spain) and ACOMP/2014/A/103 from Generalitat Valenciana (GV). P.S. has been supported by post-doctoral contracts from GV (APOSTD/2010, program VALi+d) and MINECO (program Juan de la Cierva).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Determination of Heat and Flow Characteristics in Spray Cooling with Rectangular Finned Heat Sink

  • Karabey, Altuğ
  • Yakut, Kenan
[EN] Spray cooling process has many parameters such as extended surface, angle of inclination, effect of gravity, diameter of nozzle, angle of spray, mass flux, geometry of cooled surface, thermal performance and critical heat flux of spray etc. Many effective parameters to carry out the experiments with conventional test methods are both expensive and time consuming. As a solution in these circumstances, Taguchi method, which is one of the modern experimental design and optimization methods and very effective in solving such problems, was used in this study. Taguchi method, as well as being in effective to improve the quality of products, also gives the opportunity to achieve better results with much less experiment. Using Taguchi method, as well as to reach the target value exactly, the sensitivity of the design against uncontrollable factors is reduced to a minimum. Thus, the optimum tolerance range in cost and quality factors is determined. When compared to conventional experimental design methods, Taguchi method has many advantages. In these experiments with using rectangular pin fin heat sinks, the effects of the longitudinal and lateral distances of the consecutively arranged nozzle or diffuser-like fin pairs, widths of the fins, angle of fins, heights of fins, spraying time, air flow rate, liquid flow rate (ALR, the ratio of air-liquid flow rate) and the ratio of the nozzle-heat sink distance to the nozzle diameter (h/d) on heat and flow characteristics have been investigated by using Taguchi experimental design method. For this reason, characteristics of flow and heat transfer are considered separately. Nusselt number considered as performance statistic, L27(311) orthogonal array has been selected as an experimental design plan for the eleven parameters mentioned above. The Nusselt number was calculated by taking into account the characteristic length of heat sink and the optimized results were found to be fin width of 45 mm, fin angle of 45o , fin height of 15 mm, x direction distance between fins of 20 mm, y direction distance between fins of 20 mm, x direction distance between slices of 15 mm, y direction distances between slices of 20 mm, air flow rate of 10-3 m 3 /s, liquid flow rate of 5,83*10-6 m3 /s, spraying time of 5 s and the ratio of the nozzle-heat sink distance to the nozzle diameter (h/d) of 667., This research was supported as project (BAP-2013/103) of the Research Fund of Ataturk University.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bragg Gratings Inscription in TS-Doped PMMA POF by Using 248-nm KrF Pulses

  • Min, Rui
  • Hu, Xuehao
  • Broadway, Christian
  • Caucheteur, Christophe
  • Pun, Chi-Fung Jeff
  • Tam, Hwa-Yaw
  • Antunes, Paulo
  • Marques, Carlos
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] We demonstrate the Bragg gratings inscription in the 850-nm spectral region by using trans-4-stilbenemethanol-doped poly methyl methacrylate step-index optical fiber and a 248-nm krypton fluoride (KrF) excimer laser system. The gratings inscription only takes 0.4 s. A detailed study of the grating fabrication process using different pulse repetition rates is also reported. In addition, temperature, humidity, and strain sensitivities are measured to demonstrate the potentiality of these components for different sensing applications., The research leading to these results has received funding from the Fundacao para a Ciencia e Tecnologia (FCT)/MEC national funds and when applicable co-funded by FEDER-PT2020 Partnership Agreement under Project UID/EEA/50008/2013. This work was also supported in part by the Research Excellence Award Programme GVA Prometeo 2017/103 Future Microwave Photonics Technologies and Applications, and in part by the Fundamental Research Funds for the Heilongjiang Provincial Universities under Grant KJCXZD201703. The work of C. Marques was supported by FCT through the Fellowship SFRH/BPD/109458/2015.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Time-frequency analysis of long fiber Bragg gratings with low reflectivity

  • Sancho Durá, Juan
  • Chin, Sanghoon
  • Thevenaz, Luc
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
A new technique to investigate the spatial distribution of the reflection spectrum along fabricated long weak fiber Bragg gratings (FBG) is experimentally demonstrated, together with its potential applications for distributed fiber sensing and broadband signal processing. A short pulsed coherent light signal is launched into a FBG and the signal frequency is scanned through the FBG reflection spectrum. When the pulse duration is set much shorter than the transit time through the grating a time-resolved reflected signal can be obtained for each signal frequency. It informs about the distribution of the refractive index periodic perturbation along the entire FBG length, hence the uniformity or frequency chirp information of the fabricated FBG. This technique has been implemented to demonstrate a distributed temperature sensing system with high spatial resolution and to also realize a robust all-fiber tunable delay line for broadband signals., The authors wish to acknowledge the financial support of the European Commission through the COST Action TD1001 "OFSeSa"; Infraestructura FEDER UPVOV08-3E-008, FEDER UPVOV10-3E-492, Ministerio de Ciencia e Innovacion through the project TEC2011-29120C05-05, the Swiss National Science Foundation through project 200021-134546 and the EPFL Space Center.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bidirectional WDM-OOFDM access network based on a sliceable optical transceiver with colorless ONUs

  • Sekkiou, Imene
  • Chicharro, Francisco I.|||0000-0001-9116-2870
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
  • Mora Almerich, José|||0000-0002-2877-4118
[EN] A WDM OOFDM access network using a centralized optical transceiver based on a single optical broadband sliced source at the Central Office is presented as a low cost solution. Such network offers downlink and uplink signal transmission by using double sideband modulation and optical carrier re-use, as well as dynamic bandwidth allocation, multiple band selection and tunable OFDM band selection in reconfigurable networks at moderate bitrates., The authors acknowledge the Research Excellence Award Programme GVA PROMETEO 2017/103 Future Microwave Photonic Technologies and Applications.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Advanced and versatile interferometric technique for the characterization of photonic integrated devices

  • Bru-Orgiles, Luis Alberto
  • Pastor Abellán, Daniel|||0000-0002-5297-3918
  • P. Muñoz|||0000-0001-6026-1649
[EN] Adaptable and complex optical characterization of photonic integrated devices, permitting to unearth possible design and fabrication errors in the different workflow steps are highly desired in the community. Here, we propose a technique capable of resolving full optical amplitude and phase response, in both frequency and time domains, of a photonic integrated device. It relies on optical frequency domain interferometry and makes use of a novel integrated architecture; a 3-way interferometer enabling single input and single output detection. We derive the test structure design rules and provide extensive experimental validation in silicon nitride and silicon on insulator technologies, by testing relevant devices such as arrayed waveguide grating, Mach-Zehnder interferometers, and ring resonators. Horizontal and vertical chip coupling, different external setup arrangements, and the optical dispersion de-embedding inherent to the technique are demonstrated. Finally, we discuss why this characterization approach might lay the groundwork of a standard testing tool for photonic integrated devices., Ministerio de Economia y Competitividad (PTA2015-11309-I, TEC2015-69787-REDT PIC4TB, TEC201680385-P SINXPECT); Ministerio de Ciencia, Innovacion y Universidades (PID2019-110877GB-I00 BHYSINPICS); Generalitat Valenciana (GVA PROMETEO 2017/103).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dynamic approximate entropy electroanatomic maps detect rotors in a simulated atrial fibrillation model

  • Ugarte, Juan P.
  • Orozco-Duque, Andrés
  • Tobon Zuloaga, Catalina
  • Kremen, Vaclav
  • Novak, Daniel
  • Oesterlein, Tobias
  • Schmitt, Clauss
  • Luik, Armin
  • Bustamante, John
  • Saiz Rodríguez, Francisco Javier|||0000-0002-9850-0825
There is evidence that rotors could be drivers that maintain atrial fibrillation. Complex fractionated atrial electrograms have been located in rotor tip areas. However, the concept of electrogram fractionation, defined using time intervals, is still controversial as a tool for locating target sites for ablation. We hypothesize that the fractionation phenomenon is better described using non-linear dynamic measures, such as approximate entropy, and that this tool could be used for locating the rotor tip. The aim of this work has been to determine the relationship between approximate entropy and fractionated electrograms, and to develop a new tool for rotor mapping based on fractionation levels. Two episodes of chronic atrial fibrillation were simulated in a 3D human atrial model, in which rotors were observed. Dynamic approximate entropy maps were calculated using unipolar electrogram signals generated over the whole surface of the 3D atrial model. In addition, we optimized the approximate entropy calculation using two real multicenter databases of fractionated electrogram signals, labeled in 4 levels of fractionation. We found that the values of approximate entropy and the levels of fractionation are positively correlated. This allows the dynamic approximate entropy maps to localize the tips from stable and meandering rotors. Furthermore, we assessed the optimized approximate entropy using bipolar electrograms generated over a vicinity enclosing a rotor, achieving rotor detection. Our results suggest that high approximate entropy values are able to detect a high level of fractionation and to locate rotor tips in simulated atrial fibrillation episodes. We suggest that dynamic approximate entropy maps could become a tool for atrial fibrillation rotor mapping., JPU, CT, and JB were partially supported by Departamento Administrativo de Ciencia, Tecnologia e Innovacion de la Republica de Colombia (www.colciencias.gov.co), project # 121056933647; AO was supported by the Programa de Formacion de Investigadores Francisco Jose de Caldas (www.colciencias.gov.co); VK and DN were partially supported by research project # MSM6840770012 Interdisciplinary Biomedical Engineering Research II from the Ministry of Education (www.msmt.cz), Youth and Sports of the Czech Republic, and VK was partially supported by post-doctoral research project GACR # P103/11/P106 of the Czech Science Foundation (www.gacr.cz). The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Supervised Machine Learning Algorithms for Measuring and Promoting Sustainable Transportation and Green Logistics

  • Castaneda, Juliana
  • Cardona, John.F.
  • Martins, Leandro do C.
  • Juan, Angel A.|||0000-0003-1392-1776
[EN] The sustainable development of freight transport has received much attention in recent years. The new regulations for sustainable transport activities established by the European Commission and the United Nations have created the need for road freight transport companies to develop methodologies to measure the social and environmental impact of their activities. This work aims to develop a model based on supervised machine learning methods with intelligent classification algorithms and key performance indicators for each dimension of sustainability as input data. This model allows establishing the level of sustainability (high, medium, or low). Several classification algorithms were trained, finding that the support vector machines algorithm is the most accurate, with 98% accuracy for the data set used. The model is tested by establishing the level of sustainability of a European company in the road freight sector, thus allowing the establishment of green strategies for its sustainable development., This work has been partially supported by the Spanish Ministry of Science (PID2019-111100RB-C21 / AEI /10.13039/501100011033, RED2018-102642-T), and the Erasmus+ Program (2019-I-ES01-KA103-062602).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Low Cost Plastic Optical Fiber Pressure Sensor Embedded in Mattress for Vital Signal Monitoring

  • Sartiano, Demetrio
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] The aim of this paper is to report the design of a low-cost plastic optical fiber (POF) pressure sensor, embedded in a mattress. We report the design of a multipoint sensor, a cheap alternative to the most common fiber sensors. The sensor is implemented using Arduino board, standard LEDs for optical communication in POF (¿ = 645 nm) and a silicon light sensor. The Super ESKA® plastic fibers were used to implement the fiber intensity sensor, arranged in a 4 × 4 matrix. During the breathing cycles, the force transmitted from the lungs to the thorax is in the order of tens of Newtons, and the respiration rate is of one breath every 2¿5 s (0.2¿0.5 Hz). The sensor has a resolution of force applied on a single point of 2.2¿4.5%/N on the normalized voltage output, and a bandwidth of 10 Hz, it is then suitable to monitor the respiration movements. Another issue to be addressed is the presence of hysteresis over load cycles. The sensor was loaded cyclically to estimate the drift of the system, and the hysteresis was found to be negligible., This research was supported by FINESSE project, funded by the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Action grant agreement No. 722509 and PROMETEO 2017/103 Tecnologias y Aplicaciones Futura de la Fotonica de Microondas.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cloud services representation using SLA composition

  • García García, Andrés
  • Blanquer Espert, Ignacio|||0000-0003-1692-8922
SLA-aware Cloud platforms need mechanisms to represent, store and retrieve Cloud services. Usually services changes between different platforms, custom models are built to capture this information and ad-hoc implementations used to store and retrieve it. This paper propose a generic methodology for the representation of Cloud services. This methodology uses the WS-Agreement specification for capturing and manipulation arbitrary services using SLA fragments. SLA fragments are composed on the fly in response to user request. A SLA composition algorithm enables a prototype implementation of the methodology in a SLA-aware Cloud platform. This methodology provides the genericity, extensibility and flexibility to unify the modeling of Cloud services. Finally a use case provides a quantitative measure of the utility provided by the methodology from a Cloud user and Cloud provider point of view., This work has been developed under the support of the program Formacion de Personal Investigador de Caracter Predoctoral grant number BFPI/2009/103, from the Conselleria d'Educacio of the Generalitat Valenciana and the financial support received from the Ministerio de Economia y Competitividad for the project CodeCloud (TIN2010-17804).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

An Adaptive LoRa-Based Edge Architecture for Data Sensing and Collection in Natural Parks

  • Cecilia-Canales, José María|||0000-0001-5648-214X
  • Arratia-Uribe, Benjamín Andrés|||0000-0001-7869-053X
  • Rosas-Olivos, Erika Susana
  • Martín Furones, Ángel Esteban|||0000-0001-9379-0694
  • Perles, Angel|||0000-0002-5782-4284
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] This article introduces the design of a flexible IoT/Edge architecture to overcome the challenges of deploying advanced sensors in remote settings such as natural parks. These environments demand reliable communication and considerable computational resources to manage the extensive real-time data from IoT devices like sensors and cameras. Our approach combines two LoRa-based protocols to efficiently handle large data blocks and ensure long-range communication, conserving energy and maintaining data integrity crucial for integrating sophisticated sensors with conventional IoT devices. The architecture offers edge computing within a containerbased gateway, simplifying on-site data processing and minimizing data traffic complexities. The MQTT protocol supports interoperability among distributed services, enhancing adaptability and efficiency in processing data locally or via cloud services like digital twins. We demonstrate this system¿s effectiveness through two case studies in natural parks: visitor counting using Time of Flight technology and water level measurement with GNSS data. These cases highlight the system¿s ability to handle frequent small and less frequent large data transmissions efficiently, This work has been supported by the MCSA-SE REMARKABLE grant ID: 101086387; Research project CIPROM/2023/29, funded by Direccio General de Ciencia ` i Investigacio Generalitat Valenciana - SPAIN; EU s Horizon ¿ 2020 research and innovation program No 101017861, by project Ramon y Cajal Grant RYC2018-025580-I, funded by ¿ MCIN/AEI/ 10.13039/501100011033 and ESF Investing in your future, GVA GRISOLIAP/2021/103 and Grant TED2021- 130890B funded by MCIN/AEI and by EU NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Integrated InP frequency discriminator for Phase-modulated microwave photonic links

  • Sánchez Fandiño, Javier Antonio
  • Doménech Gómez, José David
  • P. Muñoz|||0000-0001-6026-1649
  • Capmany Francoy, José|||0000-0002-6460-4167
[EN] We report the design, fabrication and characterization of an integrated frequency discriminator on InP technology for microwave photonic phase modulated links. The optical chip is, to the best of our knowledge, the first reported in an active platform and the first to include the optical detectors. The discriminator, designed as a linear filter in intensity, features preliminary SFDR values the range between 67 and 79 dB.Hz2/3 for signal frequencies in the range of 5-9 GHz limited, in principle, by the high value of the optical losses arising from the use of several free space coupling devices in our experimental setup. As discussed, these losses can be readily reduced by the use of integrated spot-size converters improving the SFDR by 17.3 dB (84-96 dB.Hz2/3). Further increase up to a range of (104-116 dB.Hz2/3) is possible by reducing the system noise eliminating the EDFA employed in the setup and using a commercially available laser source providing higher output power and lower relative intensity noise. Other paths for improvement requiring a filter redesign to be linear in the optical field are also discussed., The authors wish to acknowledge the financial support given by the Research Excellency Award Program GVA PROMETEO 2008/092, Spanish MICINN Project TEC2010-21337, acronym ATOMIC; project FEDER UPVOV10-3E-492 and project FEDER UPVOV08-3E008. J.S. Fandiño acknowledges financial support through grant FPU-2010 (ref: AP2010- 1595). J. D. Doménech acknowledges both Beca de Formacion de Personal Investigador (FPI) research grant (ref: BES-2009-018381) and funding from Intel Doctoral Student Honor Programme. The authors are also grateful to the EuroPIC consortium (FP7 funded programme NMP 228839-2) for access to the design manual and design toolkit of the generic InP fab
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Full field model for interleave-chirped arrayed waveguide gratings

  • Gargallo Jaquotot, Bernardo Andrés
  • P. Muñoz|||0000-0001-6026-1649
In this paper, a theoretical model for an Interleave-Chirped Arrayed Waveguide Grating (IC-AWG) is presented. The model describes the operation of the device by means of a field (amplitude and phase) transfer response. The validation of the model is accomplished by means of simulations, using parameters from previously fabricated devices. A novel design procedure is derived from the model, and it is later on employed to demonstrate the design of colorless universal IC-AWGs. The model can be readily applied to the analysis and design of future multi-wavelength optical coherent communications receivers and optical waveform analyzers., The authors acknowledge financial support by the Spanish MICINN Project TEC2010-21337, acronym ATOMIC; project FEDER UPVOV10-3E-492 and project FEDER UPVOV08-3E-008. B. Gargallo acknowledges financial support through FPI grant BES-2011-046100.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Time resolved emission at 1.3 micrometers of a single InAs quantum dot by using a tunable fibre Bragg grating

  • Muñoz Matutano, Guillermo
  • Rivas, David
  • Ricchiuti, Amelia Lavinia
  • Fernández Pousa, Carlos R.
  • Martínez Pastor, J.
  • Seravalli, Luca
  • Trevisi, Giovanna
  • Frigeri, Paola
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] Photoluminescence and time resolved photoluminescence from single metamorphic InAs/GaAs quantum dots (QDs) emitting at 1.3 micrometers have been measured by means of a novel fibre-based characterization set-up. We demonstrate that the use of a wavelength tunable fibre Bragg grating filter increases the light collection efficiency by more than one order of magnitude as compared to a conventional grating monochromator. We identified single charged exciton and neutral biexciton transitions in the framework of a random population model. The QD recombination dynamics under pulsed excitation can be understood under the weak quantum confinement potential limit and the interaction between carriers at the wetting layer and QD states., G Munoz-Matutano appreciates valuable help from Professor Miguel Andres (University of Valencia) and thanks the Spanish Juan de la Cierva program (JCI-2011-10686). We acknowledge the support of the FEDER actions UPVOV08-3E-008 and UPVOV10-3E-492, the PROMETEO2009/74 project from Generalitat Valenciana, the Spanish projects TEC2011-29120-C05-01-02-05, the Italian FIRB Project ‘Nanotecnologie e Nanodispositivi per la Societa` dell’Informazione’ and ‘SANDiE’ Network of Excellence of EC, Contract No. NMP4-CT-2004-500101.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Long Weak FBG Sensor Interrogation Using Microwave Photonics Filtering Technique

  • Lavinia Ricchiuti, Amelia
  • Thevenaz, Luc
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Capmany Francoy, José|||0000-0002-6460-4167
A system to interrogate photonic sensors based on long weak fiber Bragg gratings (FBGs) is illustrated and experimentally demonstrated. The FBG sensor is able to detect and measure the precise location of several spot events. The principle of operation is based on a technique used to analyze microwave photonics filters. The long weak FBGs are used as quasi-distributed sensors. Several events can be detected along the FBG device with a spatial accuracy of <1 mm using a modulator and a photodetector with a modest bandwidth of <500 MHz. The simple proposed scheme is intrinsically robust against environmental changes and easy to reconfigure., This work was supported in part by the COST Action under Grant TD1001 through the OFSeSa Project, in part by the Infraestructura through the Federacion Espanola de Enfermedades Raras Project under Grant UPVOV08-3E-008 and Grant UPVOV10-3E-492, in part by the Spanish Ministerio de Ciencia e Innovacion under Project TEC2011-29120-C05-05, in part by the Valencia Government through the Ayuda Complementaria Project under Grant ACOMP/2013/146, in part by the Research Excellency Award Program GVA PROMETEO under Grant 2013/012, and in part by the Swiss Commission for Technology and Innovation under Project 13122.1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evolutionary analysis of tomato Sw-5 resistance breaking isolates of Tomato spotted wilt virus

  • López Del Rincón, Carmelo|||0000-0001-7459-1315
  • Soler Aleixandre, Salvador|||0000-0001-8325-3326
  • Aramburu, J.
  • Galipienso, L.
  • Nuez Viñals, Fernando
  • Rubio, L.
[EN] Tomato spotted wilt virus (TSWV) causes severe economic losses in many crops worldwide and often overcomes resistant cultivars used for disease control. Comparison of nucleotide and amino acid sequences suggested that tomato resistance conferred by the gene Sw-5 can be overcome by the amino acid substitution C to Y at position 118 (C118Y) or T120N in the TSWV movement protein, NSm. Phylogenetic analysis revealed that substitution C118Y has occurred independently three times in the studied isolates by convergent evolution, whereas the substitution T120N was a unique event. Analysis of rates of non-synonymous and synonymous changes at individual codons showed that substitution C118Y was positively selected. © 2011 SGM., This work was supported by the INIA (grants RTA04-004-C2 and RTA2008-00010-C03), the MEC (AGL2005-07754) and the Generalitat Valenciana (ACOMP/07/225 and ACOMP/2009/103). We would like to thank A. Barba for technical assistance and Professors Santiago F. Elena, Pedro Moreno and Bryce W. Falk for their excellent review of the manuscript and Daniel R. Pearce for English editing.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluating the 3D documentation of an early Christian upright stone with carvings from Scotland with multiples images

  • Lerma, José Luis|||0000-0001-9443-9214
The documentation of cultural heritage assets requires precise and consistent approaches to preserve, analyse and monitor their integrity to future generations. The present paper deals with the 3D documentation of a unique early Christian carved stone discovered from Scotland that had been restored in the early 20th BC after accidental fragmentation. Different recording approaches are investigated; one range-based, acquired with a triangulation laser scanner and two image-based 3D reconstruction approaches, following computer vision and photogrammetric workflow with differing numbers of images. An off-the-shelf zoom digital camera was used to acquire the data, followed by structure from motion and dense multi-view image matching to create dense 3D point clouds. The differences in the derived 3D models are presented and meaningful recommendations can be extrapolated for likewise surveys., The authors acknowledge the Generalitat Valenciana grant BEST/2013/103 for the postdoctoral stay in Scotland, as well as the support provided by the Spanish Ministry of Science and Innovation to the project HAR2010-18620.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Transmission of Tomato spotted wilt virus isolates able and unable to overcome tomato or pepper resistance by its vector Frankliniella occidentalis

  • Debreczeni, Diana Elvira
  • Rubio, L.
  • Aramburu, J.
  • Galipienso, L.
  • Belliure, B.
  • López Del Rincón, Carmelo|||0000-0001-7459-1315
  • Soler Aleixandre, Salvador|||0000-0001-8325-3326
[EN] Tomato spotted wilt virus (TSWV) causes serious diseases of many economically important crops. Disease control has been achieved by breeding tomato and pepper cultivars with the resistance genes Sw-5 and Tsw, respectively. However, TSWV isolates overcoming these genetic resistances have appeared in several countries. To evaluate the risk of spread of these resistance-breaking isolates, we tested their ability of transmission by the main vector of TSWV, the thrips Frankliniella occidentalis. We compared the transmission rate by thrips of six TSWV isolates of different biotype (able or unable to overcome this resistance in pepper and tomato), and with divergent genotype (A and B). Our results indicate that the transmission rate was related to the amount of virus accumulated in thrips but not to virus accumulation in the source plants on which thrips acquired the virus. No correlation was found between transmission efficiency by thrips and the genotype or between transmission efficiency and the ability of overcoming both resistances. This result suggests that resistance-breaking isolates have the same potential to be transmitted as the isolates unable to infect resistant tomato and pepper cultivars., This work was supported by grants RTA2008-00010-C03 and FEDER, and ACOMP/2009/103 financed by INIA and Generalitat Valenciana, respectively. D. E. D. was recipient of a FPU predoctoral fellowship from the Spanish Ministry of Science and Education and B. B. was supported by an INIA-CCAA contract. Fito´ and Seminis kindly provided the seeds of the tomato and pepper cultivars used in the experiment. We would like to thank Debora Mart ´ ´ınez and Dolores Com´ın for technical assistance, as well as Dr D. Peters (Wageningen University, the Netherlands) and Dr J. Contreras (Universidad Politecnica de Cartagena, Spain) ´ for kindly providing the TSWV isolate BR01 and a thrips colony, respectively. Drs E. Carbonell and J. Perez- Panades (IVIA) are thanked for statistical advice. Two anonymous referees improved a previous version of the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Solving Vehicle Routing Problems under Uncertainty and in Dynamic Scenarios: From Simheuristics to Agile Optimization

  • Ammouriova, Majsa
  • Herrera, Erika M.
  • Neroni, Mattia
  • Faulin, Javier
  • Juan, Angel A.|||0000-0003-1392-1776
[EN] Many real-life applications of the vehicle routing problem (VRP) occur in scenarios subject to uncertainty or dynamic conditions. Thus, for instance, traveling times or customers' demands might be better modeled as random variables than as deterministic values. Likewise, traffic conditions could evolve over time, synchronization issues should need to be considered, or a real-time re-optimization of the routing plan can be required as new data become available in a highly dynamic environment. Clearly, different solving approaches are needed to efficiently cope with such a diversity of scenarios. After providing an overview of current trends in VRPs, this paper reviews a set of heuristic-based algorithms that have been designed and employed to solve VRPs with the aforementioned properties. These include simheuristics for stochastic VRPs, learnheuristics and discrete-event heuristics for dynamic VRPs, and agile optimization heuristics for VRPs with real-time requirements., This work was partially funded by the Spanish Ministry of Science, Innovation, and Universities (PID2019-111100RB-C21-C22/AEI/10.13039/501100011033), the SEPIE Erasmus+ Program (2019-I-ES01-KA103-062602), the Barcelona City Council and Fundacio "la Caixa" under the framework of the Barcelona Science Plan 2020-2023 (21S09355-001), and the Generalitat Valenciana (PROMETEO/2021/065).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Path Quality Estimator for 802.15.4e TSCH Fast Deployment Tool

  • Vera-Pérez, Jose
  • TODOLI FERRANDIS, DAVID
  • Santonja Climent, Salvador
  • Silvestre-Blanes, Javier|||0000-0001-7091-0040
  • Sempere Paya, Víctor Miguel|||0000-0001-9271-2010
[EN] This paper introduces a novel quality estimator that uses different metrics to decide the best path towards the root in Wireless Sensor Networks. The different metrics are assessed at medium access control layer (MAC), under the IEEE 802.15.4 standard, and are used at network layer, enhancing the best path selection process done by the routing protocol, and at the application layer, enabling visual quality indicators in the nodes. This quality function is used during deployment stage; ensuring nodes are located optimally and nimbly. This mechanism will help WSN¿s adoption in Industrial Internet of Things applications., This work is supported by IVACE (Insituto Valenciano de Competitividad Empresarial) through FEDER funding (exp. IMDEEA/2017/103).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Gene silencing in plants by artificial small RNAs derived from minimal precursors and expressed via tobacco rattle virus

  • Juárez Molina, María
  • CARBONELL, ALBERTO|||0000-0001-5628-6632
  • Alarcia, Ana
  • Primc, Anamarija
  • Ortega-Miralles, Ivan
  • Cisneros, Adriana E.
[EN] Highly specific, second-generation RNA interference tools are based on artificial small RNAs (art-sRNAs), such as artificial microRNAs (amiRNAs) and synthetic trans-acting small interfering RNAs (syn-tasiRNAs). Recent progress includes the use of minimal-length precursors to express art-sRNAs in plants. These minimal precursors retain the minimal structural elements for recognition and efficient processing by host enzymes. They yield high amounts of art-sRNAs and remain stable when incorporated into potato virus X-based viral vectors for art-sRNA-mediated virus-induced gene silencing (art-sRNA-VIGS). However, further adaptation to new viral vector systems with reduced symptomatology is needed to improve the versatility of art-sRNA-VIGS. Here, we developed a novel platform based on tobacco rattle virus (TRV)-a widely used viral vector inducing minimal or no symptoms-for the delivery of art-sRNAs into plants. TRV was engineered to express authentic amiRNAs and syn-tasiRNAs from minimal precursors in Nicotiana benthamiana, resulting in robust and highly specific silencing of endogenous genes. Notably, the expression of syn-tasiRNAs through TRV conferred strong resistance against tomato spotted wilt virus, an economically important pathogen. Furthermore, we established a transgene-free approach by applying TRV-containing crude extracts through foliar spraying, eliminating the need for stable genetic transformation. In summary, our results highlight the unique advantages of minimal precursors and extend the application of art-sRNA-VIGS beyond previously established viral vector systems, providing a scalable, rapid and highly specific tool for gene silencing., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work was supported by grants or fellowships from "MCIN/AE/10.13039/501100011033" and/or by the European Union NextGenerationEU/PRTR [PID2024-155602OBI00, PID2021-122186OB-100 and CNS2022-135107 to A.C.; PRE2022-103177 and PRE2019-088439 to M.J.M and A.E.C, respectively] and from European Commission [Erasmus+Grant Agreement 2020-1-DE01-KA103-005653 to A.P.].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fuzzy Simheuristics for Optimizing Transportation Systems: Dealing with Stochastic and Fuzzy Uncertainty

  • Tordecilla, Rafael D.
  • Martins, Leandro do C.
  • Panadero, Javier
  • Copado, Pedro J.
  • Pérez Bernabeu, Elena|||0000-0002-9221-7623
  • Juan, Angel A.|||0000-0003-1392-1776
[EN] In the context of logistics and transportation, this paper discusses how simheuristics can be extended by adding a fuzzy layer that allows us to deal with complex optimization problems with both stochastic and fuzzy uncertainty. This hybrid approach combines simulation, metaheuristics, and fuzzy logic to generate near-optimal solutions to large scale NP-hard problems that typically arise in many transportation activities, including the vehicle routing problem, the arc routing problem, or the team orienteering problem. The methodology allows us to model different components-such as travel times, service times, or customers' demands-as deterministic, stochastic, or fuzzy. A series of computational experiments contribute to validate our hybrid approach, which can also be extended to other optimization problems in areas such as manufacturing and production, smart cities, telecommunication networks, etc., This work has been partially supported by the Spanish Ministry of Science (PID2019-111100RB-C21/AEI/10.13039/501100011033, RED2018-102642-T), and the Erasmus+ program (2019-I-ES01-KA103-062602). This research received no external funding.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A clustering-based review on project portfolio optimization methods

  • Saiz, Miguel
  • Lostumbo, Marisa A.
  • Lopez-Lopez, David
  • Juan, Angel A.|||0000-0003-1392-1776
[EN] Project portfolio management and optimization constitutes a critical activity for organizations in different industrial sectors and business. The scientific literature in this subject is extremely vast, which makes it difficult to understand the connections among the existing approaches and perspectives. This paper provides a clustering map of the existing work on the subject, thus identifying the main trends and approaches from different scientific communities. After analyzing each of the identified clusters, the paper provides insights and emerging trends that can be useful both for researchers and practitioners in the area., This project has been partially supported by the Spanish Ministry of Science and Innovation (PID2019-111100RB-C21/AEI/ 10.13039/501100011033, RED2018-102642-T), the Erasmus+ Program (2019-I-ES01-KA103-062602), FEDER, and the AGAUR (2018 LLAV 00017).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Agile optimization for a real-time facility location problem in Internet of Vehicles networks

  • Martins, Leandro do C.
  • Tarchi, Daniele
  • Fusco, Alessandro
  • Juan, Angel A.|||0000-0003-1392-1776
[EN] The uncapacitated facility location problem (UFLP) is a popular NP-hard optimization problem that has been traditionally applied to logistics and supply networks, where decisions are difficult to reverse. However, over the years, many new application domains have emerged, in which real-time optimization is needed, such as Internet of Vehicles (IoV), virtual network functions placement, and network controller placement. IoV scenarios take into account the presence of multiple roadside units (RSUs) that should be frequently assigned to operating vehicles. To ensure the desired quality of service level, the allocation process needs to be carried out frequently and efficiently, as vehicles' demands change. In this dynamic environment, the mapping of vehicles to RSUs needs to be reoptimized periodically over time. Thus, this article proposes an agile optimization algorithm, which is tested using existing benchmark instances. The experiments show that it can efficiently generate high-quality and real-time results in dynamic IoV scenarios., This research was partially supported by the Spanish Ministry of Science (PID2019-111100RB-C21/AEI/10.13039/501100011033, RED2018-102642-T) and the Erasmus+ program (2019-I-ES01-KA103-062602). A major part of this work was done during Alessandro Fusco's visit to the Universitat Oberta de Catalunya, Spain, supported by the Erasmus+ Study program of the European Union. The authors also thank Jon Raleigh for the final review of the paper.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Lead-free low-melting-point glass as bonding agent for TiO2 nanoparticles

  • Lopez-Esteban, S.
  • Cabal, B.
  • Bartolomé, J.F.
  • Fernandez, A.
  • Faraldos, M.
  • Bahamonde, A.
  • Moya, J.S.
  • Pecharroman, C.
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
[EN] This work is a study of the properties of TiO2-anatase nanoparticles attached by a low-melting point inorganic glass (530 degrees C). Unlike other low-melting glasses, this composition does not contain any toxic metal. Likewise, it shows an excellent wettability on ceramic nanoparticles. A small addition of 5 vol% of glass remarkably enhances the mechanical strength of the composites with respect to pure TiO2 calcined at the same temperature, becoming twice this value. Self-cleaning properties analyzed using the methylene blue 385 nm UV-A photodegradation test showed that, after different UV-light periods, the photo-efficiency of TiO2-anatase was not altered by the presence of this glass., This work was supported by CSIC under grant 201960E103 and by the Spanish Ministry of Science Innovation and Universities (MCIU/AEI/FEDER, UE) under award RTI2018-094958-B-I00. Dr. Borrell acknowledges the Spanish Ministry of Economy and Competitiveness for her RyC contract (RYC-2016-20915).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Silicon opto-electronic wavelength tracker based on an asymmetric 2x3 Mach-Zehnder Interferometer

  • Doménech Gómez, José David
  • Sánchez Fandiño, Javier Antonio
  • Gargallo Jaquotot, Bernardo Andrés
  • Baños López, Rocío
  • P. Muñoz|||0000-0001-6026-1649
[EN] In this paper we report on the experimental demonstration of a Silicon-on-Insulator opto-electronic wavelength tracker for the optical telecommunication C-band. The device consist of a 2x3 Mach-Zehnder Interferometer (MZI) with 10 pm resolution and photo-detectors integrated on the same chip. The MZI is built interconnecting two Multimode Interference (MMI) couplers with two waveguides whose length difference is 56 mm. The first MMI has a coupling ratio of 95:05 to compensate for the propagation loss difference corresponding to the 56 mm. The wavelength tracker design provides three complementary, with 120◦ phase relations, responses. The MZI optical responses exhibit rejection as good as 15 dB, thanks to asymmetric design for the input coupler. Synchronized recorded DC electronic responses for the three photo-detector outputs reproduce the MZI de-phased characteristic, allowing for monitoring wavelength changes with sign., The authors acknowledge financial support by the Spanish CDTI NEOTEC start-up programme, the Spanish MICINN project TEC2010-21337, acronym ATOMIC, the Spanish MINECO project TEC2013-42332-P, acronym PIC4ESP, project FEDER UPVOV 10-3E-492 and project FEDER UPVOV 08-3E-008. B. Gargallo acknowledges financial support through FPI grant BES-2011-046100. J.S. Fandiño acknowledge financial support through FPU grant AP2010-1595.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Largely tunable dispersion chirped polymer FBG

  • Min, Rui
  • Korganbayev, Sanzhar
  • Molardi, Carlo
  • Broadway, Christian
  • Hu, Xuehao
  • Caucheteur, Christophe
  • Bang, Ole
  • Antunes, Paulo
  • Tosi, Daniele
  • Marques, Carlos
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] We demonstrate a largely tunable dispersion fiber Bragg grating (FBG) inscribed in a microstructured polymer optical fiber (mPOF). The bandwidth of the chirped FBG (CFBG) was achieved from 0.11 to 4.86 nm, which corresponds to a tunable dispersion range from 513.6 to 11.15 ps/nm. Furthermore, thermal sensitivity is used to compensate for the wavelength shift due to the applied strain. These results demonstrate that a CFBG in a POF is a promising technology for future optical systems. (C) 2018 Optical Society of America, Fundacao para a Ciencia e a Tecnologia (FCT) (SFRH/BPD/109458/2015, UID/EEA/50008/2013); Research Excellence Award Programme GVA (PROMETEO 2017/103); Oak Ridge Associated Universities (ORAU) (LIFESTART (2017-2019)); Natural Science Foundation of Heilongjiang Province (F2018026).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Colloidal Quantum Dots-PMMA Waveguides as Integrable Microwave Photonic Phase Shifters

  • Ricchiuti, Amelia L.
  • Suárez Álvarez, Isaac
  • Rodríguez Cantó, Pedro Javier
  • Fernandez-Pousa, Carlos R.
  • Abargues, Rafael
  • Martinez-Pastor, Juan
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Capmany Francoy, José|||0000-0002-6460-4167
A novel scheme for the control of microwave signals carried at optical wavelengths by use of PbS colloidal quantum dots embedded in PMMA waveguides is presented. When these structures are pumped at wavelengths where PbS has efficient absorption (980 or 1310 nm), a phase shift in a signal carried at 1550 nm is induced. Optimal conditions have been analyzed by studying the influence of the microwave signal and the waveguide structure. In a proof-of-concept experiment, a continuous phase shift up to 35° at 25 GHz has been demonstrated, with good thermal stability (<2° at 25 GHz) when the samples are heated 20 °C above room temperature. The potential benefits of the use of this active-waveguide technology in microwave photonics are due to the continuous scan of the phase delay, its high tuning speed, and its small size, which leads to the possibility of integration., This work was supported in part by the Infraestructura FEDER under Grants UPVOV08-3E-008 and FEDER UPVOV10-3E-492, in part by the Research Excellency Award Program GVA PROMETEO 2013/012, Next generation Microwave Photonic Technologies, and in part by the Spanish MCINN under Projects TEC2011-29120-C05-01, TEC2011-29120-C05-02, and TEC2011-29120-C05-05.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A biased-randomized iterated local search for the vehicle routing problem with optional backhauls

  • Londoño, Julio C.
  • Tordecilla, Rafael D.
  • do C. Martins, Leandro
  • Juan, Angel A.|||0000-0003-1392-1776
[EN] The vehicle routing problem with backhauls integrates decisions on product delivery with decisions on the collection of returnable items. In this paper, we analyze a scenario in which collection of items is optional-but subject to a penalty cost. Both transportation costs and penalties associated with non-collecting decisions are considered. A mixed-integer linear model is proposed and solved for small instances. Also, a metaheuristic algorithm combining biased randomization techniques with iterated local search is introduced for larger instances. Our approach yields cost savings and is competitive when compared to other state-of-the-art approaches., This work has been partially supported by COLCIENCIAS - Colombia, the School of Industrial Engineering of Universidad del Valle, the IoF2020, the AGAUR (2018-LLAV-00017), and the Erasmus+ Program (2018-1-ES01-KA103-049767). We also acknowledge the support of the doctoral programs at the Universitat Oberta de Catalunya and the Universidad de La Sabana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Performance evaluation of framed slotted ALOHA with reservation packets and succesive interference cancelation for M2M networks

  • Casares-Giner, Vicente|||0000-0002-6947-8470
  • Martínez Bauset, Jorge|||0000-0003-3342-3037
  • Portillo, Canek
[EN] Random access protocols like ALOHA have been considered for machine-to-machine (M2M) communication in future networks for their simplicity of operation. This paper evaluates the performance of a Frame Slotted-ALOHA protocol that uses reservation and data packets (FSA-RDP), in a scenario where a controller collects data packets transmitted by a finite number of M2M devices. In FSA-RDP, frames of variable duration are divided in two parts, the reservation and data subframes. During the reservation subframe, active devices send short reservation packets to the controller. The controller assigns reserved slots in the data subframe to those devices that succeeded with the reservation. At devices, the FIFO service discipline and two queue management schemes, tail drop and push-out, have been considered. When the queue size is of one packet, we develop a discrete-time Markov chain to evaluate the protocol performance, including the cumulative distribution function of the delay of data packets that are successfully transmitted. Analytical results are validated by extensive simulations. The simulation model is also used to evaluate the system performance when larger queues are used. In addition, we study the impact that implementing Successive Interference Cancellation (SIC) at the controller has on the system performance. We also evaluate the performance of implementing SIC at the controller together with Irregular Repetition Slotted ALOHA (IRSA) to send the reservation packets. Numerical results show that the protocol efficiency of FSA-RDP is between one and two orders of magnitude larger than the efficiency of conventional Frame Slotted ALOHA, when a perfect channel is assumed. In more realistic channel environments, the use of SIC brings an important performance boost., This work has been supported by the Ministry of Economy and Competitiveness of Spain through projects TIN2013-47272-C2-1-R and TEC2015-71932-REDT. The authors would like to thank the support received from the Institute ITACA (Instituto Universitario de Tecnologias de la Informacion y Comunicaciones) at the Universitat Politecnica de Valencia, Spain. C. Portillo acknowledges the funding received from the European Union under the program Erasmus Mundus Partnerships, project EuroinkaNet, GRANT AGREEMENT NUMBER -2014 -0870/001/001, and the support received from SEP-SES (DSA/103.5/15/6629).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pultruded FRP Beams with Embedded Fibre Bragg Grating Optical Sensors for Strain Measurement and Failure Detection

  • Maldonado-Hurtado, Daniel Gustavo|||0000-0001-8585-0271
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Penades, Antonio
  • Ruiz, Rocío
  • Crespo, Ana Isabel
[EN] Composites have added new dimensions to the design and construction of buildings and struc-tures. One of the wider spread composite applications in the construction industry is composite beams or pillars, which can be manufactured through pultrusion processes. These types of con-struction elements are usually used to withstand the weight of large loads, so their integrity must be guaranteed. Due to optical sensors¿ advantages over their electrical counterparts¿small sizes, low weight, non-conductive, and immunity to electromagnetic interference¿and FBGs having an outstanding position among optical fibre sensors¿due to their multiplexation capability and relatively easy monitoring¿in this study, we propose the integration of FBG sensors for the observation and analysis of the integrity of structures made with composite beams over time. The validation test results showed the successful embedding integration of FBG-based fibre optical sensors in an FRP pultrusion beam and strain transmission up to 7500 µ¿ from the composite test piece to the sensor. Additionally, we were able to anticipate the piece failure by the FBG spectrum deformation., This publication is partially supported by the I+D+i project SYNERGY PID2020-118310RBI00 funded by the MCIN/AEI/10.13039/501100011033; also, by the Generalitat Valenciana, the PROMETEO 2017/103 Research Excellency Award, and IDIFEDER/2020/032, as well as IDIFEDER/ 2021/050 GVA Infraestructura. D. Maldonado-Hurtado is supported by a scholarship PRE2018- 085654, funded by MCIN/AEI/10.13039/501100011033, and FSE invierte en tu futuro. J. Madrigal is supported by a scholarship PAID-01-18, funded by Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Algoritmo robusto para el diagnóstico de fallas eléctricas en el motor de inducción trifásico basado en herramientas espectrales y ondeletas, Robust algorithm for electric fault diagnosis in the three phase induction machine based on spectral and wavelet tools.

  • Villalobos Piña, Francisco Javier
  • Álvarez Salas, Ricardo
[EN] This work present a group of tools based on the fast Fourier transform (FFT) and Haar, Daubechies and Coiflet discrete wavelet transform (DWT), using the Park's instantaneous space phasor module (ISP) of the three phase induction machine stator currents for electric stator and rotor fault diagnosis. A simulation and experimental validation for inter-turn stator short-circuit electric fault and end-ring broken rotor fault diagnosis was performed. The main objective of the work is to perform a non invasive electric fault diagnosis to avoid economical losses in the industrial process using the advantages of spectral and wavelet tools., [ES] En este trabajo se presenta un conjunto de herramientas basadas en la transformada rápida de Fourier (TRF) y la transformada discreta ondeleta (TDO) Haar, Daubechies y Coiflet utilizando el módulo del vector espacial instantáneo (VEI) de las corrientes de estator del motor de inducción trifásico para diagnosticar fallas en el estator y en el rotor. Se efectúa un estudio en simulación y una validación experimental de fallas eléctricas del estator para cortocircuito entre espiras de un mismo devanado y problemas de fisura de barra y anillo de cortocircuito de rotor. El objetivo del trabajo es contar con una herramienta de tipo no invasiva que permita efectuar el diagnóstico de fallas incipientes (con un carácter preventivo) con el fin de evitar pérdidas económicas importantes en diferentes procesos industriales que utilizan máquinas de inducción aprovechando para ello las virtudes que ofrece la TRF y la TDO mediante el análisis de las firmas de corriente del estator del motor de inducción (MI), así como el diagnóstico de fallas drásticas con fines correctivos., Este trabajo fue financiado por programa de Doctorado en Ciencias de la Ingeniería del Instituto Tecnológico de Aguascalientes, el apoyo del proyecto PROMEP/ITA/103.5/13/8890 y con recursos del convenio PROMEP/UASLP/CARepPrel-15 y C14- FAI-04-42.42
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Auto-routing algorithm for field-programmable photonic gate arrays

  • López-Hernández, Aitor
  • Pérez-López, Daniel
  • Dasmahapatra, Prometheus
  • Capmany Francoy, José|||0000-0002-6460-4167
[EN] Programmable multipurpose photonic integrated circuits require software routines to make use of their flexible operation as desired. In this work, we propose and demonstrate the use of a modified tree-search algorithm to automatically determine the optimum optical path in a field-programmable photonic gate array (FPPGA), based on end-user specifications, circuit architecture and imperfections in the realized FPPGA arising, for example, from fabrication variations. In such a scenario, the proposed algorithm only requires the hardware topology and the location of the connections of the FPPGA defining the optical path to be programmed. The routine is able to optimize the path over multiple and competing objectives like the overall length, accumulated loss and power consumption. In addition, should any region of the circuit suffer from any potential damage that may affect the device performance, this algorithm is also able to provide basic self-healing and fault-tolerance capabilities by supplying alternative paths through the photonic arrangement., The authors acknowledge financial support by the ERC ADG-2016 UMWP-Chip ERC-2016- ADG-741415, the ERC PoC-2019 FPPAs ERC-2019-POC-859927, the Generalitat Valenciana Future MWP technologies and applications PROMETEO 2017/103 research excellency award, and the COST Action CA16220 EUIMWP, the Advanced Instrumentation for World Class Microwave Photonics Research IDIFEDER/2018/031 and the Infraestructura para caracterizacion de Chips Fotonicos EQC2018-004683-P
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modeling amplified arbitrary filtered microwave photonic links and systems

  • Sánchez-Gomáriz, Erica
  • Pérez-López, Daniel
  • Dasmahapatra, Prometheus
  • Capmany Francoy, José|||0000-0002-6460-4167
[EN] Microwave photonic (MWP) links and systems will have more losses as their complexities increase and there will be a need for incorporating optical amplification. Here, we report results of an analytical model developed for amplified arbitrary filtered MWP systems that provides the expressions of the main figures of merit fur intensity modulation direct detection. It contemplates the cases of power, intermediate and pre amplification. The model is applied to a long MWP link and then it is evaluated in a MWP reconfigurable filter implemented by means of a programmable waveguide mesh photonic integrated circuit., Ministerio de Ciencia, Innovacion y Universidades (JUANDELACIERVAAWARD); European Commission (H2020-ICT-2019-021-871330 NEOTERIC); Generalitat Valenciana (IDIFEDER/2018/031, IDIFEDER/2020/032, PROMETEO/2017/103); European Research Council (ERC ADG-2016-741415 UMWP-Chip, ERC-POC-2019-859927).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of complex fractionated atrial electrograms by Sample Entropy: An international multi-center study

  • Cirugeda Roldán, Eva María
  • Novak, Daniel
  • Kremen, Vaclav
  • Keller, Matthias
  • Luik, Armin
  • Srutova, Martina
  • Cuesta Frau, David|||0000-0002-0076-0515
Atrial fibrillation (AF) is the most commonly clinically-encountered arrhythmia. Catheter ablation of AF is mainly based on trigger elimination and modification of the AF substrate. Substrate mapping ablation of complex fractionated atrial electrograms (CFAEs) has emerged to be a promising technique. To improve substrate mapping based on CFAE analysis, automatic detection algorithms need to be developed in order to simplify and accelerate the ablation procedures. According to the latest studies, the level of fractionation has been shown to be promisingly well estimated from CFAE measured during radio frequency (RF) ablation of AF. The nature of CFAE is generally nonlinear and nonstationary, so the use of complexity measures is considered to be the appropriate technique for the analysis of AF records. This work proposes the use of sample entropy (SampEn), not only as a way to discern between non-fractionated and fractionated atrial electrograms (A-EGM), but also as a tool for characterizing the degree of A-EGM regularity, which is linked to changes in the AF substrate and to heart tissue damage. The use of SampEn combined with a blind parameter estimation optimization process enables the classification between CFAE and non-CFAE with statistical significance (p < 0:001), 0.89 area under the ROC, 86% specificity and 77% sensitivity over a mixed database of A-EGM combined from two independent CFAE signal databases, recorded during RF ablation of AF in two EU countries (542 signals in total). On the basis of the results obtained in this study, it can be suggested that the use of SampEn is suitable for real-time support during navigation of RF ablation of AF, as only 1.5 seconds of signal segments need to be analyzed., This work has been supported by the Spanish Ministry of Science and Innovation, Research Project TEC 2009-14222, by the Ministry of Education Youth and Sports of the Czech Republic, the Grant Agency of the Czech Technical University in Prague No. SGS13/203/OHK3/3T/13 and by the Czech Science 300 Foundation post-doctoral GACR research project GACR #P103/11/P106.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Long fiber Bragg grating sensor interrogation using discrete-time microwave photonic filtering techniques

  • Ricchiuti, Amelia Lavinia
  • Thevenaz, Luc
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Capmany Francoy, José|||0000-0002-6460-4167
A novel technique for interrogating photonic sensors based on long fiber Bragg gratings (FBGs) is presented and experimentally demonstrated, dedicated to detect the presence and the precise location of several spot events. The principle of operation is based on a technique used to analyze microwave photonics (MWP) filters. The long FBGs are used as quasi-distributed sensors. Several hot-spots can be detected along the FBG with a spatial accuracy under 0.5 mm using a modulator and a photodetector (PD) with a modest bandwidth of less than 1 GHz. The proposed interrogation system is intrinsically robust against environmental changes., The authors wish to acknowledge the financial support of the Infraestructura FEDER UPVOV08-3E-008, FEDER UPVOV10-3E-492, the Spanish MCINN through the projects TEC2011-29120-C05-05 and TEC2011-29120-C05-01, the Valencia Government through the Ayuda Complementaria ACOMP/2013/146, European Commission through the COST Action TD1001 "OFSeSa" and the Swiss National Science Foundation through project 200021-134546 and the financial support given by the Research Excellency Award Program GVA PROMETEO 2013/012, Next generation Microwave Photonic technologies.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Syn-tasiR-VIGS: virus-based targeted RNAi in plants by synthetic trans-acting small interfering RNAs derived from minimal precursors

  • Cisneros, Adriana E.
  • Alarcia, Ana
  • Puertes, Ana
  • Primc, Anamarija
  • Juanjo
  • Juárez Molina, María
  • CARBONELL, ALBERTO|||0000-0001-5628-6632
[EN] Synthetic trans-acting small interfering RNAs (syn-tasiRNAs) are 21-nucleotide (nt) small RNAs designed to silence plant transcripts with high specificity. Their use as biotechnological tools for functional genomics and crop improvement is limited by the need to transgenically express long TAS precursors to produce syn-tasiRNAs in vivo. Here, we show that authentic and highly effective syn-tasiRNAs can be produced from minimal, non-TAS precursors consisting of a 22-nt endogenous microRNA target site, an 11-nt spacer, and the 21 nt syn-tasiRNA sequence(s). These minimal precursors, when transgenically expressed in Arabidopsis thaliana and Nicotiana benthamiana, generated highly phased syn-tasiRNAs that silenced one or multiple plant genes with high efficacy. Remarkably, minimal but not full-length TAS precursors produced authentic syn-tasiRNAs and induced widespread gene silencing in N. benthamiana when expressed from an RNA virus, which can be applied by spraying infectious crude extracts onto leaves in a transgene-free manner. This strategy, named syn-tasiRNA-based virus-induced gene silencing (syn-tasiR-VIGS), was further used to vaccinate plants against a pathogenic virus, resulting in complete plant immunization. Our results reveal that syn-tasiRNA precursors can be significantly shortened without compromising silencing efficacy, and that syn-tasiR-VIGS represents a versatile, scalable, and nontransgenic platform for precision RNA interference and antiviral vaccination in plants., This work was supported by grants or fellowships from MCIN/AEI/10.13039/501 100 011 033 and/or by the European Union NextGenerationEU/PRTR [PID2021-122186OB-100, CNS2022-135107 and RYC-2017-21648 to A.C.; PRE2019-088439, PRE2022-102565, and PRE2022-103177 to A.E.C., J.L.G., and M.J.M, respectively], from Consejo Superior de Investigaciones Científicas (CSIC, Spain) [JAEINT_20_01312 to A.P.E.], and from European Commission [Erasmus + Grant Agreement 2020-1-DE01-KA103-005653 to A.P.].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Atrial location optimization by electrical measures for Electrocardiographic Imaging

  • Gisbert Soler, Víctor|||0000-0001-9961-2469
  • Jiménez-Serrano, Santiago|||0000-0003-2917-6053
  • Roses-Albert, Eduardo
  • RODRIGO BORT, MIGUEL
[EN] Background: The Electrocardiographic Imaging (ECGI) technique, used to non-invasively reconstruct the epicardial electrical activity, requires an accurate model of the atria and torso anatomy. Here we evaluate a new automatic methodology able to locate the atrial anatomy within the torso based on an intrinsic electrical parameter of the ECGI solution. Methods: In 28 realistic simulations of the atrial electrical activity, we randomly displaced the atrial anatomy for +/- 2.5 cm and +/- 30 degrees on each axis. An automatic optimization method based on the L-curve curvature was used to estimate the original position using exclusively non-invasive data. Results: The automatic optimization algorithm located the atrial anatomy with a deviation of 0.5 +/- 0.5 cm in position and 16.0 +/- 10.7 degrees in orientation. With these approximate locations, the obtained electrophysiological maps reduced the average error in atrial rate measures from 1.1 +/- 1.1 Hz to 0.5 +/- 1.0 Hz and in the phase singularity position from 7.2 +/- 4.0 cm to 1.6 +/- 1.7 cm (p < 0.01). Conclusions: This proposed automatic optimization may help to solve spatial inaccuracies provoked by cardiac motion or respiration, as well as to use ECGI on torso and atrial anatomies from different medical image systems., This work was supported in part by: Generalitat Valenciana Grants [APOSTD/2017] and projects [GVA/2018/103]; Nvidia Corporation with GPU QUADRO P6000 donation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

AI*LoRa: Enabling Efficient Long-Range Communication with Machine Learning at the Edge

  • Arratia-Uribe, Benjamín Andrés|||0000-0001-7869-053X
  • Rosas-Olivos, Erika Susana
  • Cecilia-Canales, José María|||0000-0001-5648-214X
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Pietrosemoli, Ermanno
  • Zennaro, Marco
[EN] Efficient long-range communication is critical for environmental monitoring, especially when dealing with large data transfers in remote areas. We present an AI-driven dynamic RF configuration mode, which combines the advanced capabilities of a novel AI*LoRa model with an enhanced RF configuration request mechanism. By leveraging TinyML, AI*LoRa dynamically adjusts key parameters of the physical layer, based on real-time environmental data, ensuring robust and energy-efficient communication. We conducted extensive real-world testing across distances ranging from a few meters to over 100 kilometers to collect the dataset necessary for training our model. The results demonstrate that our approach achieved over 90% accuracy in predicting optimal settings, leading to an average improvement of over 170% in communication efficiency. These findings underscore AI*LoRa's significant potential to enhance long-range IoT deployments., This work has been supported by the MCSA-SE REMARKABLE grant ID: 101086387 and SMARTLAGOON grant No 101017861, by project Ramón y Cajal Grant RYC2018-025580-I, funded by MCIN/AEI/ 10.13039/501100011033 and ESF Investing in your future, GVA GRISOLIAP/2021/103 and Grant TED2021-130890B funded by MCIN/AEI and by EU NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Temperature gradient sensor based on a long-fiber Bragg grating and time-frequency analysis

  • Ricchiuti, Amelia Lavinia
  • Nonaka, Koji
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
A photonic sensor based on a 10-cm-long fiber Bragg grating (FBG) is presented and experimentally validated that is dedicated to detect the presence and the position of a temperature gradient. The system is based on the measurement of the central frequency distribution of the grating based on time-frequency domain analysis. A short optical pulse, having duration much shorter than the transit time along the grating, is coupled into the FBG, and the back-reflected pulse is scanned by means of an oscilloscope. A spatial resolution of 1 mm, given by half the input pulse duration, is achieved. The proposed sensor is based on a simple configuration and presents a sensing range of 10 cm, which could be further enhanced by fabricating a longer grating. (C) 2014 Optical Society of America, The authors wish to acknowledge the Infraestructura FEDER UPVOV08-3E-008, FEDER UPVOV10-3E-492, the Spanish MCINN through the project TEC2011-29120-C05-05, the Valencian Government through the Ayuda Complementaria ACOMP/2013/146 and the financial support given by the Research Excellency Award Program GVA PROMETEO 2013/012.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Deploy&amp, Forget Wireless Sensor Networks for itinerant applications

  • Todoli Ferrandis, David
  • Santonja Climent, Salvador
  • Vera-Pérez, Jose
  • Silvestre-Blanes, Javier|||0000-0001-7091-0040
  • Sempere Paya, Víctor Miguel|||0000-0001-9271-2010
[EN] Industrial Internet of Things (IIoT) is a disruptive paradigm which will bring new ways of monitoring, control and management for Industry 4.0 and Smart Cities. It relies on smart and connected sensors enabled by a new generation of communication technologies such as Wireless Sensor Networks (WSN). Although various solutions are becoming available, the reality is most of the end users of these systems won't be communications experts, so the complexity and deployment difficulties are strong barriers for adopting this technology. This article briefly summarizes the state of art of current industrial wireless sensor networks technology, and presents the concept of Deploy&Forget network: a solution to enable the rapid deployment of WSN by assisting users onsite, reducing time and complexity of deployment, and includes a designed protocol stack to ensure unattended and long lasting operation. This technology emerges as an evolution of previous WSN works where these problems where clearly identified, and has been deployed and validated in water management tasks for Valencia, energy measurement in offices, and contextual monitoring for "Zero-Defect Manufacturing" for Industry 4.0. (c) 2017 The Authors. Published by Elsevier B.V., This work is supported by the Spanish Government MEC Project TIN2013-47272-C2-1-R, the regional Generalitat Valenciana's grants for research groups (AICO/2015/121), and by the IVACE (Instituto Valenciano de Competitividad Empresarial) through FEDER funding (exp. IMDEEA/2017/103).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An agile optimisation algorithm for the multi-source team orienteering problem

  • Neroni, M.
  • Panadero, J.
  • Ghorbani, E.
  • Ammouriova, M.
  • Juan, Angel A.|||0000-0003-1392-1776
[EN] In the team orienteering problem (TOP), a fixed fleet of vehicles have to collect rewards by visiting customers. Typically, all vehicles depart from a source depot and end in a sink depot. Also, each vehicle has a limited driving range, so not all customers can be visited. The goal is then to select the set of customers to be visited, and the corresponding routes to do it, such in a way that the total reward collected is maximised while respecting the aforementioned constraints. This paper explores a TOP variant with multiple source depots and where real-time solutions need to be provided, i.e., computation times need to be in the order of milliseconds even for mid-sized instances with hundreds of customers. To deal with this challenge, and taking into account that the problem is NP-hard, we propose an 'agile' optimisation algorithm that is based on a biased-randomised heuristic. Our approach can be applied in realistic and dynamic scenarios where vehicles need to recompute their routes in real-time, as vehicles are in-route, new customers appear, and some existing customers are not available anymore., This work has been funded by PID2022-138860NB-I00, RED2022-134703-T, 2019-1-ES01-KA103-062602 and PROMETEO/2021/065.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Gas-phase and particulate products from the atmospheric degradation of the organothiophosphorus insecticide chlorpyrifos-methyl

  • Borrás García, Esther Mª
  • Ródenas, Milagros
  • Vera, Teresa
  • Coscollá, Clara
  • Yusá, Vicent
  • Muñoz, Amalia
  • Tortajada-Genaro, Luis Antonio|||0000-0003-4021-5607
The phosphorothioate structure is highly present in several organophosphorus pesticides. However, there is insufficient information about its degradation process after the release to the atmosphere and the secondary pollutants formed. Herein, the atmospheric reaction of chlorpyrifos-methyl (o,o-dimethyl o-(3,5,6-trichloropyridin-2-yl) phosphorothioate), is described for semi-urban or rural locations. The photo-oxidation under low NOx conditions (5-55 ppbV) was reproduced in a large outdoor simulation chamber, observing a rapid degradation (lifetime<3.5 h). The formation of gaseous products and particulate matter (aerosol yield 2-8%) was monitored. The chemical composition of minor products (gaseous and particulate) was studied, identifying 15 multi-oxygenated derivatives. The most abundant products were ring-retaining molecules such as o,o-dimethyl o-(3,5,6-trichloropyridin-2-yl) phosphorothioate, dimethyl 3,5,6-trichloropyridin-2-yl phosphate, o-methyl o-(3,5,6-trichloropyridin-2-yl) hydrogen phosphorothioate, 3,5,6-trichloropyridin-2-yl dihydrogen phosphate, 3,5,6-trichloropyridin-2-ol, and 3,5,6-trichloropyridine-2,4-diol. An atmospheric degradation mechanism has been proposed based on an oxidation started with OH-nucleophilic attack to P=S bond. The results have been extrapolated to other organothiophosphorus molecules, such as malathion, parathion, diazinon and methidathion, among many others, to estimate their photo-oxidative degradation and the expected products., The authors wish to thank the EUPHORE staff and J.T.B. The authors wish to acknowledge Ministerio de Economia y Competitividad for IMPLACAVELES (CGL2013-49093-C2-1-R) and IMPESTAT (CGL2010-18474/CLI) projects, and Generalitat Valenciana for the DESESTRES- Prometeo II project. The Fundacion CEAM is partly supported by Generalitat Valenciana - Spain. EUPHORE instrumentation is partly funded by MINECO - Spain, through INNPLANTA Project: PCT-440000-2010-003 and the projects FEDER CEAM10-3E-1301 and CEAM10-3E-1302.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Low-Coherence Interferometry Using Microwave Photonics for Multilayered Samples

  • Benítez-González, Jesús
  • Mora Almerich, José|||0000-0002-2877-4118
[EN] A photonic structure is proposed by exploiting the advantages of the Microwave Photonics technology over conventional low coherence interferometry. The proposed scheme is based in the analysis of the interference pattern of an incoherent optical signal which is amplitude modulated and transmitted through a dispersive element. The strategic allocation of an interferometric structure combined with balanced photodetection are used to improve the system performance compared to the previous proposals. To the best of our knowledge, an exhaustive theoretical analysis and an experimental demonstration of the structure for multilayered samples are provided in this paper., This work was supported in part by the Ministerio de Ciencia y Tecnologia under Project TEC2014-60378 and in part by the Generalitat Valenciana under the regional Project PROMETEO 2017/103 TECNOLOGIAS Y APLICACIONES FUTURAS DE LA FOTONICA DE MICROONDAS.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Regenerated Fiber Bragg Gratings in Multicore Fiber for Multi-parameter Sensing

  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] Multiple regenerated fiber Bragg gratings were inscribed in all the cores of a seven-core fiber in order to develop a multi-parameter sensor designed to operate at high temperatures. We experimentally showed the possibility of measuring strains of up to 1200 mu epsilon, curvatures from 0 degrees to 360 degrees and temperatures up to 1000 degrees C, with a maximum curvature magnitude of at least 4.6 m(-1) and a maximum sensibility of 96 pm/m(-1)., This work was supported in part by the Spanish Ministry of Economy and Competitiveness under the DIMENSION TEC2017 88029-R Project and in part by the Generalitat Valenciana by the PROMETEO 2017/103 Research Excellency Award and IDI/FEDER/2018 GVA Infraestructura. The work of J. Madrigal was supported by a Universitat Politecnica de Valencia scholarship PAID-01-18. The work of D. Barrera was supported by a Spanish MICINN Fellowship IJCI-2017-32476.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the 40 GHz Remote Versus Local Photonic Generation for DML-Based C-RAN Optical Fronthaul

  • Vallejo-Castro, Luis
  • Nguyen, Dong-Nhat
  • Bohata, Jan
  • Zvanovec, Stanislav
  • Mora Almerich, José|||0000-0002-2877-4118
  • Almenar Terre, Vicenç|||0000-0002-8742-2315
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] Local and remote photonic millimeter wave (mmW) signal generation schemes are theoretically and experimentally evaluated in order to compare both approaches for practical deployment in a cloud radio access network (C-RAN) fronthaul network. The paper presents a full comprehensive formulation of the frequency response of a system based on a directly modulated laser transmitting data over 40 GHz signal which is generated by external carrier suppressed modulation and optical frequency multiplication. Theoretical and experimental characterization of the system response at baseband and mmW band for local and remote generation setups show very good agreement. The remote configuration leads to a higher electrical output power (i.e., 15 dB higher in 25 km fiber links) than the local generation setup in the mmW band due to the combined effect of chirp and fiber dispersion, although intermodulation distortion is higher in the former case. Transmission experiments using quadrature phase-shift keying (QPSK) signals with 250 MHz bandwidth centered at 0.5 GHz over 10 and 25 km fiber links also confirm the superior performance of the remote setup, whereas the local setup leads to similar results to optical back-to-back (OB2B) measurements, which is also validated with data signals centered at different frequencies within the laser bandwidth frequency range. Finally, experimental results show the quality of the recovered signals in terms of error vector magnitude (EVM) as a function of the received electrical power and demonstrate that no further penalties are introduced by photonic mmW signal generation with respect to electrical back-to-back (EB2B) levels., This work was supported in part by Generalitat Valenciana through PROMETEO2017/103, in part by Ministerio de Ciencia, Innovacion y Universidades through FOCAL RTI2018-101658-B-I00, in part by MEYES under Grant LTC18008, in part by the Ministry of Industry and Trade in Czech Republic under Grant FV40089, and in part by European Cooperation in Science and Technology under Grants CA16220 and CA19111.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Non-invasive Spatial Mapping of Frequencies in Atrial Fibrillation: Correlation With Contact Mapping

  • Rodrigo, Miguel
  • Waddell, Kian
  • Magee, Sarah
  • Rogers, Albert J.
  • Alhusseini, Mahmood
  • Hernández-Romero, Ismael
  • Costoya-Sánchez, Alejandro
  • Liberos, Alejandro
  • Narayan, Sanjiv M.
[EN] Introduction: Regional differences in activation rates may contribute to the electrical substrates that maintain atrial fibrillation (AF), and estimating them non-invasively may help guide ablation or select anti-arrhythmic medications. We tested whether non-invasive assessment of regional AF rate accurately represents intracardiac recordings. Methods: In 47 patients with AF (27 persistent, age 63 +/- 13 years) we performed 57-lead non-invasive Electrocardiographic Imaging (ECGI) in AF, simultaneously with 64-pole intracardiac signals of both atria. ECGI was reconstructed by Tikhonov regularization. We constructed personalized 3D AF rate distribution maps by Dominant Frequency (DF) analysis from intracardiac and non-invasive recordings. Results: Raw intracardiac and non-invasive DF differed substantially, by 0.54 Hz [0.13 - 1.37] across bi-atrial regions (R-2 = 0.11). Filtering by high spectral organization reduced this difference to 0.10 Hz (cycle length difference of 1 - 11 ms) [0.03 - 0.42] for patient-level comparisons (R-2 = 0.62), and 0.19 Hz [0.03 - 0.59] and 0.20 Hz [0.04 - 0.61] for median and highest DF, respectively. Non-invasive and highest DF predicted acute ablation success (p = 0.04). Conclusion: Non-invasive estimation of atrial activation rates is feasible and, when filtered by high spectral organization, provide a moderate estimate of intracardiac recording rates in AF. Non-invasive technology could be an effective tool to identify patients who may respond to AF ablation for personalized therapy., This work was supported in part by: Generalitat Valenciana Grants (APOSTD/2017 and APOSTD/2018) and projects (GVA/2018/103); the National Institutes of Health (R01 HL85537; R01 HL149134).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

UWB Doublet Generation Employing Cross-Phase Modulation in a Semiconductor Optical Amplifier Mach Zehnder Interferometer

  • Moreno, Vanessa
  • Rius Mercado, Manuel
  • Muriel, M.A.
  • Mora Almerich, José|||0000-0002-2877-4118
  • Capmany Francoy, José|||0000-0002-6460-4167
In this paper, a novel method to generate ultrawideband (UWB) doublets is proposed and experimentally demonstrated, which is based on exploiting the cross-phase modulation in a semiconductor optical amplifier (SOA). The key component is an integrated SOA Mach-Zehnder interferometer pumped with an optical carrier modulated by a Gaussian pulse. The transfer function of the nonlinear conversion process leads to the generation of UWB doublet pulses by tuning the SOA currents to different values., This work was supported in part by national projects TEC2010-21303-C04-02 and TEC2011-26642 under the responsibility of the Ministerio de Economia y Competitividad, by projects FEDER UPVOV08-3E-008 and UPVOV10-3E-492, and by the Generalitat Valenciana under the Research Excellency Award Program GVA PROMETEO 2013/012 Next Generation Microwave Photonic technologies. Corresponding author: J. Mora (e-mail: jmalmer@iteam.upv.es).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electro-refraction modulation predictions for silicon graphene waveguides in the 1540-1560 nm region

  • Pérez-López, Daniel
  • Doménech Gómez, José David
  • P. Muñoz|||0000-0001-6026-1649
  • Capmany Francoy, José|||0000-0002-6460-4167
We derive analytical approximations for the variation of the effective indices of the fundamental transverse electric (TE) and transverse magnetic (TM) modes with the chemical potential of graphene in three common types of silicon graphene waveguides. In all cases, a third-order polynomial provides an excellent degree of approximation (<; 10-4) over the 1540-1560 nm wavelength band. The approximations can be useful in the design of complex-integrated photonic circuits where graphene is employed to tune the refractive of the dielectric waveguides., This work was supported in part by the Research Excellency Award Program GVA PROMETEO II/2013/012; in part by Spanish MINECO projects TEC2013-42332-P PIF4ESP, TEC2015-69787-REDT PIC4TB, and TEC2014-60378-C2-1-R MEMES; and in part by projects FEDER UPVOV 10-3E-492 and FEDER UPVOV 08-3E-008. The work of D. Perez was supported by the FPI-UPV Grant Program from the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Noninvasive Assessment of Complexity of Atrial Fibrillation Correlation With Contact Mapping and Impact of Ablation

  • RODRIGO BORT, MIGUEL
  • Hernández-Romero, Ismael
  • Liberos Mascarell, Alejandro
  • Baykaner, Tina
  • Rogers, Albert J.
  • Alhusseini, Mahmood
  • Wang, Paul J.
  • Fernández-Avilés, Francisco
  • Narayan, Sanjiv M.
  • Atienza, Felipe
  • Andreu M. Climent|||0000-0002-7260-8811
  • Guillem Sánchez, María Salud|||0000-0001-5660-3693
[EN] Background: It is difficult to noninvasively phenotype atrial fibrillation (AF) in a way that reflects clinical end points such as response to therapy. We set out to map electrical patterns of disorganization and regions of reentrant activity in AF from the body surface using electrocardiographic imaging, calibrated to panoramic intracardiac recordings and referenced to AF termination by ablation. Methods: Bi-atrial intracardiac electrograms of 47 patients with AF at ablation (30 persistent, 29 male, 63 +/- 9 years) were recorded with 64-pole basket catheters and simultaneous 57-lead body surface ECGs. Atrial epicardial electrical activity was reconstructed and organized sites were invasively and noninvasively tracked in 3-dimension using phase singularity. In a subset of 17 patients, sites of AF organization were targeted for ablation. Results: Body surface mapping showed greater AF organization near intracardially detected drivers than elsewhere, both in phase singularity density (2.3 +/- 2.1 versus 1.9 +/- 1.6; P=0.02) and number of drivers (3.2 +/- 2.3 versus 2.7 +/- 1.7; P=0.02). Complexity, defined as the number of stable AF reentrant sites, was concordant between noninvasive and invasive methods (r(2)=0.5; CC=0.71). In the subset receiving targeted ablation, AF complexity showed lower values in those in whom AF terminated than those in whom AF did not terminate (P<0.01). Conclusions: AF complexity tracked noninvasively correlates well with organized and disorganized regions detected by panoramic intracardiac mapping and correlates with the acute outcome by ablation. This approach may assist in bedside monitoring of therapy or in improving the efficacy of ongoing ablation procedures., This article was supported in part by: Instituto de Salud Carlos III FEDER (Fondo Europeo de Desarrollo Regional; IJCI-2014-22178, DTS16/00160; PI14/00857, PI16/01123; PI17/01059; PI17/01106), Generalitat Valenciana Grants (APOSTD/2017 and APOSTD/2018) and projects (GVA/2018/103); National Institutes of Health (Dr Narayan: R01 HL85537; K24 HL103800); EITHealth 19600 AFFINE.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

BIO bragg gratings on microfibers for label-free biosensing

  • Juste-Dolz, Augusto Miguel|||0000-0003-4889-6419
  • Avella-Oliver, Miquel|||0000-0002-7293-6989
  • Pastor Abellán, Daniel|||0000-0002-5297-3918
  • Maquieira, Angel|||0000-0003-4641-4957
  • Delgado-Pinar, Martina
  • Fernández-Sánchez, María Estrella
  • Andrés, Miguel V.
[EN] Discovering nanoscale phenomena to sense biorecognition events introduces new perspectives to exploit nano science and nanotechnology for bioanalytical purposes. Here we present Bio Bragg Gratings (BBGs), a novel biosensing approach that consists of diffractive structures of protein bioreceptors patterned on the surface of optical waveguides, and tailored to transduce the magnitude of biorecognition assays into the intensity of single peaks in the reflection spectrum. This work addresses the design, fabrication, and optimization of this system by both theoretical and experimental studies to explore the fundamental physicochemical parameters involved. Functional biomolecular gratings are fabricated by microcontact printing on the surface of tapered optical microfibers, and their structural features were characterized. The transduction principle is experimentally demonstrated, and its quantitative bioanalytical prospects are assessed in a representative immunoassay, based on patterned protein probes and selective IgG targets, in label-free conditions. This biosensing system involves appealing perspectives to avoid unwanted signal contributions from non-specific binding, herein investigated in human serum samples. The work also proves how the optical response of the system can be easily tuned, and it provides insights into the relevance of this feature to conceive multiplexed BBG systems capable to perform multiple label-free biorecognition assays in a single device., Spanish Ministry of Science and Innovation (CTQ2016-75749-R and TEC2016-80385-P), Agencia Estatal de Investigacion and Fondo Europeo de Desarrollo Regional (PID2019-110877 GB-I00 and PDI2019-104276RB-I00) and Generalitat Valenciana (PROMETEO/2019/048 and PROMETEO/2017/103). A.J.-D. acknowledges the FPI-UPV 2017 grant program, M.A.-O acknowledges the APSOSTD/2019 program of the GVA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Scalable analysis for arbitrary photonic integrated waveguide meshes

  • Pérez-López, Daniel
  • Capmany Francoy, José|||0000-0002-6460-4167
[EN] The advances in fabrication processes in different material platforms employed in integrated optics are opening the path towards the implementation of circuits with increasing degrees of complexity. In addition to the more conventional application specific photonic circuit paradigm, the programmable multifunctional photonics (PMP) approach is a transversal concept inspired by similar approaches, which are already employed in other technology fields. For instance, in electronics, field programmable gate array devices enable a much more flexible universal operation as compared to application specific integrated circuits. In photonics, the PMP concept is enabled by two-dimensional (2D) waveguide meshes for which the number of possible input/outputs ports quickly builds up, and, furthermore, internal signal flow paths make the computation of transfer functions an intractable problem. Here we report a scalable method based on mathematical induction that allows one to obtain the scattering matrix of any 2D integrated photonic waveguide mesh circuit composed of an arbitrary number of cells and that is easily programmable. To our knowledge this is the first report of the kind, and our results open the path to unblocking this important design bottleneck. (C) 2019 Optical Society of America under the terms of the OSA Open Access Publishing Agreement, H2020 European Research Council (ERC) (ADG741415 UMWPCHIP); Generalitat Valenciana (PROMETEO 2017/103); European Cooperation in Science and Technology (COST) (CA16220 EUIMWP)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mathematical methodology to obtain and compare different embryo scores

  • Debón, A.|||0000-0002-5116-289X
  • Cabrera García, Suitberto|||0000-0003-1704-8361
  • Molina Botella, María Inmaculada
  • Pellicer, A.
In Vitro Fertilization (IVF) units need to decrease multiple pregnancies without affecting their overall success rate. In this study we propose a mathematical model to evaluate an embryo’s potential ability to implant in the uterus. Embryos are graded by the embryologist based on the number of blastomeres, evenness of growth and degree of fragmentation. Therefore, the following variables were considered: number of blastomeres produced by division of the egg after fertilisation (blastomeres), symmetry and fragmentation of the embryo (grade). This model evaluates the embryos assigning them a score which represents their quality. The main result derived from this model is the estimation of the significant improvement in the implantation rate due to the increase in blastomere values and the decrease in grade factor values. But the increase from two–three to four produces more improvement in the implantation rate than two–three to five–six blastomeres. First, statistical models were used to study embryo traceability from transfer to implantation and to evaluate the effect of the quality of the embryos (embryo score) and women’s age on implantation potential. This score was obtained by making predictions from the fitted model which was used to rank embryos in terms of implantation potential. Then we totalled the scores of embryos that had been transferred to each woman for obtaining the Embryo Quality Index (EQI). In addition, we studied the effects of EQI and women’s age on pregnancy. Finally, statistical techniques such as Receiver Operating Characteristics (ROC) and bootstrap procedures were used to assess the accuracy of this model. This embryo score is a quick, efficient and accurate tool to optimise embryo selection for transfers on the second day after fertilisation. This tool is especially useful for transfers involving non-top embryos., This work was partially supported by a grant from the Generalitat Valenciana (grant no. GVPRE/2008/103). The research of AD and SC was partially supported by a grant from Ministerio de Asuntos Exteriores (grant no. A/023444/09) too. The authors are indebted to the anonymous referee whose comments and suggestions improved the paper considerably.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Influence of Host Fruit and Temperature on the Body Size of Adult Ceratitis capitata (Diptera: Tephritidae) under Laboratory and Field conditions

  • Navarro Campos, Cristina
  • Martínez Ferrer, María Teresa
  • Campos, J.M.
  • Fibla, J. M.
  • Alcaide, J.
  • Bargues Desolmes, Laura
  • Marzal Moreno, Carmen
  • García Mari, Ferran
The adult body size of the Mediterranean fruit ßy, Ceratitis capitata (Wiedemann) (Diptera: Tephritidae), varies in natural conditions. Body size is an important Þtness indicator in the Mediterranean fruit ßy;largerindividuals are more competitive at mating and have a greater dispersion capacity and fertility. Both temperature during larval development and host fruit quality have been cited as possible causes for this variation.We studied the inßuence of host fruit and temperature during larval development on adult body size (wing area) in the laboratory, and determined body size variation in Þeld populations of the Mediterannean fruit ßy in eastern Spain. Field ßies measured had two origins: 1) ßies periodically collected throughout the year in Þeld traps from 32 citrus groves, during the period 2003Ð2007; and 2) ßies evolved from different fruit species collected between June and December in 2003 and 2004. In the lab, wing area of male and female adults varied signiÞcantly with temperature during larval development, being larger at the lowest temperature. Adult size also was signiÞcantly different depending on the host fruit in which larvae developed. The size of the ßies captured at the Þeld, either from traps or from fruits, varied seasonally showing a gradual pattern of change along the year. The largest individuals were obtained during winter and early spring and the smallest during late summer. In Þeld conditions, the size of the adult Mediterannean fruit ßy seems apparently more related with air temperature than with host fruit. The implications of this adult size pattern on the biology ofC. capitata and on the application of the sterile insect technique are discussed., We thank Apostolos Pekas for his useful comments on previous versions of the manuscript. This work was supported by the project RTA03-103-C6-3 assigned to F. G. M. from the Ministerio de Educacion y Ciencia of Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Polymer optical fiber Bragg grating inscription with a single Nd:YAG laser pulse

  • Pereira, Luis
  • Min, Rui
  • Hu, Xuehao
  • Caucheteur, Christophe
  • Bang, Ole
  • Marques, Carlos
  • Antunes, Paulo
  • Pinto, João L.
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] We experimentally demonstrate the first polymer optical fiber Bragg gratings inscribed with only one Nd: YAG laser (266 nm) pulse. The gratings have been inscribed in a single-mode poly (methyl methacrylate) optical fiber, with a core doped with benzyl dimethyl ketal for photosensitivity enhancement. One laser pulse with a duration of 8 ns and energy of 72 mu J is adequate to introduce a refractive index change of 0.5 x 10(-4) in the fiber core. The stability of the gratings has been confirmed and the strain and temperature sensitivity measurements demonstrate their tunable properties. (C) 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement., FEDER funds through the COMPETE 2020 Programme, National Funds through FCT Portuguese Foundation for Science and Technology under the projects UID/CTM/50025/2013 and UID/EEA/50008/2013. C. Marques acknowledges the financial support from FCT through the fellowship SFRH/BPD/109458/2015.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multipurpose self-configuration of programmable photonic circuits

  • Pérez-López, Daniel
  • López-Hernández, Aitor
  • Dasmahapatra, Prometheus
  • Capmany Francoy, José|||0000-0002-6460-4167
[EN] Programmable integrated photonic circuits have been called upon to lead a new revolution in information systems by teaming up with high speed digital electronics and in this way, adding unique complementary features supported by their ability to provide bandwidthunconstrained analog signal processing. Relying on a common hardware implemented by two-dimensional integrated photonic waveguide meshes, they can provide multiple functionalities by suitable programming of their control signals. Scalability, which is essential for increasing functional complexity and integration density, is currently limited by the need to precisely control and configure several hundreds of variables and simultaneously manage multiple configuration actions. Here we propose and experimentally demonstrate two different approaches towards management automation in programmable integrated photonic circuits. These enable the simultaneous handling of circuit self-characterization, auto-routing, self-configuration and optimization. By combining computational optimization and photonics, this work takes an important step towards the realization of high-density and complex integrated programmable photonics., D.P.L. acknowledges funding through the Spanish MINECO Juan de la Cierva program. J.C. acknowledges funding from the ERC Advanced Grant ERC-ADG-2016-741415 UMWP-Chip and ERC-2019-POC-859927. Authors also acknowledge funding from Future MWP technologies and applications PROMETEO/2017/103, Advanced Instrumentation for World Class Microwave Photonics Research IDIFEDER/2018/031, EUIMWP CA16220, Infraestructura para caracterizacion de Chips Fotonicos EQC2018-004683-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparing risk of failure models in water supply networks using ROC curves

  • Debón, A.|||0000-0002-5116-289X
  • Carrión García, Andrés|||0000-0002-0953-2500
  • Cabrera Marcet, Enrique
  • Solano, H.
[EN] The problem of predicting the failure of water mains has been considered from different perspectives and using several methodologies in engineering literature. Nowadays, it is important to be able to accurately calculate the failure probabilities of pipes over time, since water company profits and service quality for citizens depend on pipe survival; forecasting pipe failures could have important economic and social implications. Quantitative tools (such as managerial or statistical indicators and reliable databases) are required in order to assess the current and future state of networks. Companies managing these networks are trying to establish models for evaluating the risk Of failure in order to develop a proactive approach to the renewal process, instead of using traditional reactive pipe substitution schemes. The main objective of this paper is to compare models for evaluating the risk of failure in water supply networks. Using real data from a water Supply company, this study has identified which network characteristics affect the risk of failure and which models better fit data to predict service breakdown. The comparison using the receiver operating characteristics (ROC) graph leads us to the conclusion that the best model is a generalized linear model. Also, we propose a procedure that can be applied to a pipe failure database, allowing the most appropriate decision rule to be chosen. (C) 2009 Elsevier Ltd. All rights reserved., The authors are indebted to the anonymous referees whose suggestions improved the original manuscript. This study was partially supported by a grant from MEyC (Ministerio de Educacion y Ciencia, Spain, Project CGL2004-05507). The research of Ana Debon was partially supported by a grant from Generalitat Valenciana (Grant no. GVPRE/2008/103).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

AlLoRa: Empowering environmental intelligence through an advanced LoRa-based IoT solution

  • Arratia-Uribe, Benjamín Andrés|||0000-0001-7869-053X
  • Rosas-Olivos, Erika Susana
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Cecilia-Canales, José María|||0000-0001-5648-214X
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Environmental intelligence aims to improve the decision-making process for high social and environmental value ecosystems. To this end, data are collected using different sensors to allow monitoring of different variables of interest. Typically, these ecosystems cover a large geographical area, with spots of low or no connectivity, preventing their monitoring in real time. In this work, we propose \allora{} (Advanced Layer LoRa), a modular, low-power, long-range communication protocol based on LoRa, that allows monitoring of remote natural areas. \allora{} has been evaluated and tested in an operational oceanographic buoy that has been deployed to address the specific environmental crisis of the Mar Menor lagoon in southeastern Spain - a region spanning 135 Km currently undergoing severe eutrophication process. Our results reveal that \allora{} offers good performance regarding transfer time, power consumption, and range. The throughput ranged from around 2 kbps with SF7 to approximately 300 bps with SF11; the power consumption per kilobyte transmitted varied from $395 \mu Wh$ to $428 \mu Wh$ depending on the specific device used. The Mesh mode test successfully maintained communication between nodes over 20.33 km. Further tests in various configurations under challenging conditions validated the mesh forwarding approach. Despite tripling the distance, the system maintained reliable data transfer, improving speeds from the original point-to-point setup., This work has been supported by the European Union s Horizon 2020 research and innovation program under grant agreement No 101017861 and also by the project Ramon y Cajal Grant RYC2018-025580-I, funded by MCIN/AEI/ 10.13039/501100011033 and ESF Investing in your future, GVA GRISOLIAP/2021/103 and Grant TED2021-130890B funded by MCIN/AEI and by European Union NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microwave photonics filtering technique for interrogating a very-weak fiber Bragg grating cascade sensor

  • Ricchiuti, Amelia Lavinia
  • Hervás Peralta, Javier
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Capmany Francoy, José|||0000-0002-6460-4167
A system to interrogate photonic sensors based on a very weak fiber Bragg grating cascade fiber is presented and experimentally validated and dedicated to detecting the presence and location of a spot event. The distributed sensor proposed consists of a 5-m-long fiber, containing 500 9-mm-long Bragg gratings with a grating separation of 10.21 mm. The principle of operation is based on a technique used to analyze microwave photonics filters. The detection of spot events along the sensor is demonstrated with remarkable accuracy under 1 mm, using a photodetector and a modulator with a bandwidth of only 500 MHz. The simple proposed scheme is intrinsically robust against environmental changes and is easy to reconfigure., This work was supported in part by the Infraestructura FEDER UPVOV08-3E-008, by FEDER UPVOV10-3E-492, by the Spanish MCINN through Project TEC2011-29120-C05-05, by the Valencia Government through Ayuda Complementaria ACOMP/2013/146, by the grant of the program SANTIAGO GRISOLIA, and by the Research Excellency Award Program GVA PROMETEO 2013/012.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Toward Programmable Microwave Photonics Processors

  • Pérez-López, Daniel
  • Gasulla Mestre, Ivana|||0000-0001-8088-7796
  • Capmany Francoy, José|||0000-0002-6460-4167
[EN] We describe the advances that we, and others, have reported during the last years in the area of programmable microwave photonic processors. Following a brief historical sketch, we provide a detailed account of the salient theoretical and experimental results recently reported on waveguide mesh optical core processors. The incorporation of a waveguide mesh optical core into the general microwave photonics programmable processor architecture is then addressed. We illustrate through different examples how this processor can be programmed to enable the most important functionalities required in microwave photonics., This work was supported in part by the European research Council under Grant ERC-ADG-2016-471715 UMWP-CHIP and in part by the Generalitat Valencia under Project PROMETEO-2017-103.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A simheuristic algorithm for the portfolio optimization problem with random returns and noisy covariances

  • Kizys, Renatas
  • Doering, Jana
  • Polat, Onur
  • Calvet, Laura
  • Panadero, Javier
  • Juan, Angel A.|||0000-0003-1392-1776
[EN] The goal of the portfolio optimization problem is to minimize risk for an expected portfolio return by allocating weights to included assets. As the pool of investable assets grows, and additional constraints are imposed, the problem becomes NP-hard. Thus, metaheuristics are commonly employed for solving large instances of rich versions. However, metaheuristics do not fully account for random returns and noisy covariances, which renders them unrealistic in the presence of heightened uncertainty in financial markets. This paper aims to close this gap by proposing a simulation-optimization approach - specifically, a simheuristic algorithm that integrates a variable neighborhood search metaheuristic with Monte Carlo simulation - to deal with stochastic returns and noisy covariances modeled as random variables. Computational experiments performed on a well-established benchmark instance illustrate the advantages of our methodology and analyze how the solutions change in response to a varying degree of randomness, minimum required return, and probability of obtaining a return exceeding an investor-defined threshold., This work has been partially funded by the Erasmus+ SEPIE program, Spain (2019-I-ES01-KA103-062602).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Agile optimization of a two-echelon vehicle routing problem with pickup and delivery

  • do C. Martins, Leandro
  • Hirsch, Patrick
  • Juan, Angel A.|||0000-0003-1392-1776
[EN] In this paper, we consider a vehicle routing problem in which a fleet of homogeneous vehicles, initially located at a depot, has to satisfy customers' demands in a two-echelon network: first, the vehicles have to visit intermediate nodes (e.g., a retail center or a consolidation center), where they deliver raw materials or bulk products and collect a number of processed items requested by the customers in their route; then, the vehicles proceed to complete their assigned routes, thus delivering the processed items to the final customers before returning to the depot. During this stage, vehicles might visit other intermediate nodes for reloading new items. In some real-life scenarios, this problem needs to be solved in just a few seconds or even milliseconds, which leads to the concept of "agile optimization." This might be the case in some rescue operations using drones in humanitarian logistics, where every second can be decisive to save lives. In order to deal with this real-time two-echelon vehicle routing problem with pickup and delivery, an original constructive heuristic is proposed. This heuristic is able to provide a feasible and reasonably good solution in just a few milliseconds. The constructive heuristic is extended into a biased-randomized algorithm using a skewed probability distribution to modify its greedy behavior. This way, parallel runs of the algorithm are able to generate even better results without violating the real-time constraint. Results show that the proposed methodology generates competitive results in milliseconds, being able to outperform other heuristics from the literature., This work has been partially supported by the IoF2020-H2020 and AGAUR 2018-LLAV-00017 projects, as well as by the Erasmus+ program (2018-1-ES01-KA103-049767).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Inexpensive Measuring System for the Characterization of Organic Transistors

  • Pérez Fuster, Clara|||0000-0003-0722-427X
  • Lidon-Roger, Jose V.|||0000-0003-3839-7878
  • Contat-Rodrigo, L|||0000-0001-7706-721X
  • Garcia-Breijo, Eduardo|||0000-0002-9745-8485
[EN] A measuring module has been specifically designed for the electrical characterization of organic semiconductor devices such as organic field effect transistors (OFETs) and organic electrochemical transistors (OECTs) according to the IEEE 1620-2008 standard. This device has been tested with OFETs based on 6,13-bis(triisopropylsilylethinyl) pentacene (TIPS-pentacene). The measuring system has been constructed using a NI-PXIe-1073 chassis with integrated controller and two NI-PXI-4132 programmable high-precision source measure units (SMUs) that offer a four-quadrant +/- 100V output, with resolution down to 10 pA. LabVIEW (TM) has been used to develop the appropriate program. Most of the main OFET parameters included in the IEEE 1620 standard can be measured by means of this device. Although nowadays expensive devices for the characterization of Si-based transistors are available, devices for the characterization of organic transistors are not yet widespread in the market. Fabrication of a specific and flexible module that can be used to characterize this type of transistors would provide a powerful tool to researchers., All financial support from the Spanish Government and FEDER funds (MAT2015-64139-C4-3-R (MINECO/FEDER)) and the Generalitat Valenciana (GVA funds) (AICO/2015/103) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Arbitrary Coupling Ratio Multimode Interference Couplers in Silicon-on-Insulator

  • Doménech Gómez, José David
  • Sánchez Fandiño, Javier Antonio
  • Gargallo Jaquotot, Bernardo Andrés
  • P. Muñoz|||0000-0001-6026-1649
In this paper, we present the design, manufacturing, characterization, and analysis of the coupling ratio spectral response for multimode interference couplers in silicon-on-insulator (SOI) technology. The couplers were designed using a Si rib waveguide with SiO2 cladding, on a regular 220 nm film and 2 μm buried oxide SOI wafer. A set of eight different designs, three canonical and five using a widened/narrowed coupler body, have been subject of study, with coupling ratios 50:50, 85:15, and 72:28 for the former, and 95:05, 85:15, 75:25, 65:35, and 55:45 for the latter. Two wafers of devices were fabricated, using two different etch depths for the rib waveguides. A set of six dies, three per wafer, whose line metrology matched the design, were retained for characterization. The coupling ratios obtained in the experimental results match, with little deviations, the design targets for a wavelength range between 1525 and 1575 nm, as inferred from spectral measurements and statistical analyses. Excess loss for all the devices is conservatively estimated to be approximately 0.6 dB in average. All the design parameters, body width and length, input/output positions and widths, and tapers dimensions are disclosed for reference., This work was supported by the Spanish CDTI NEOTEC start-up program, the Spanish MICINN project TEC2010-21337, acronym ATOMIC, the Spanish MINECO project TEC2013-42332-P, acronym PIC4ESP, project FEDER UPVOV 10-3E-492, and project FEDER UPVOV 08-3E-008. The work of B. Gargallo was supported by FPI under Grant BES-2011-046100. The work of J.S. Fandino was supported by FPU under grant AP2010-1595.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Monitoring temperature and vibration in a long weak grating array with short-pulse generation using a compact gain-switching laser diode module

  • Sartiano, Demetrio
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] Quasi-distributed temperature sensing and single point vibration sensing were performed. Ultrashort pulses generated by a gain-switching laser were used to interrogate a fiber Bragg gratings (FBG) array sensor. Temperature changes were measured down to 1 degrees C with sub-centimeter spatial resolution. The advantages of our fast interrogation setup were exploited, as the higher frequency limit of a dynamic measure that can be sensed is limited by the time needed to generate the optical pulse and to acquire the data from the sensor. The experimental approach described in this paper can sense mechanical vibrations up to a frequency of 245 kHz and a strain resolution as low as 1.2 mu epsilon., H2020 Marie Sklodowska-Curie Actions (MSCA-ITN-ETN-722509); Ministerio de Economia y Competitividad (DIMENSION TEC2017 88029-R); Generalitat Valenciana (PROMETEO 2017/103).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High-order UWB pulses scheme to generate multilevel modulation formats based on incoherent optical sources

  • Bolea Boluda, Mario
  • Mora Almerich, José|||0000-0002-2877-4118
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
  • Capmany Francoy, José|||0000-0002-6460-4167
We present a high-order UWB pulses generator based on a microwave photonic filter which provides a set of positive and negative samples by using the slicing of an incoherent optical source and the phase inversion in a Mach-Zehnder modulator. The simple scalability and high reconfigurability of the system permit a better accomplishment of the FCC requirements. Moreover, the proposed scheme permits an easy adaptation to pulse amplitude modulation, bi phase modulation, pulse shape modulation and pulse position modulation. The flexibility of the scheme for being adaptable to multilevel modulation formats permits to increase the transmission bit rate by using hybrid modulation formats. (C) 2013 Optical Society of America, The authors wish to acknowledge the financial support given by the national project TEC TEC2011-26642 (NEWTON) funded by the Ministerio de Economia y Competitividad, the project FEDER UPVOV10-3E-492 and Research Excellency Award Program GVA PROMETEO 2013/012 Next Generation Microwave Photonics Technologies funded by the Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modelling and multi-criteria analysis of the sustainability dimensions for the green vehicle routing problem

  • Abdullahi, Hassana
  • Reyes-Rubiano, Lorena
  • Ouelhadj, Djamila
  • Faulin, Javier
  • Juan, Angel A.|||0000-0003-1392-1776
[EN] The transport sector leads to detrimental effects on the economy, environment, and citizens quality of life. During recent years, some key-performance indicators have been proposed to quantify these negative impacts on the economic, environmental, and social dimensions of the sustainability concept. In this paper, we consider the sustainable vehicle routing problem that takes into account the aforementioned dimensions. We propose a weighted sum model and an epsilon-constraint model that combine the three dimensions, as well as a biased-randomised iterated greedy algorithm to solve the integrated problem. A comprehensive set of experiments and sensitivity analysis have been carried out with newly generated instances, which were adapted from existing vehicle routing benchmark instances. The sensitivity analysis is performed to measure the impact of each sustainability dimension and investigate trade-offs among them., This work has been partially supported by the Erasmus+ programme (2018-1-ES01-KA103-049767), and by the Spanish Ministry of Science, Innovation, and Universities (PID2019-111100RB-C21/C22; RED2018-102642-T). We also want to thank the support of the University of Portsmouth and the Public University of Navarre doctoral programmes.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of Screen-Printed Organic Electrochemical Transistors to Detect Cations of Different Sizes

  • Contat-Rodrigo, L
  • Lidon-Roger, Jose V.
  • Bonfiglio, Annalisa
  • Pérez Fuster, Clara|||0000-0003-0722-427X
  • Garcia-Breijo, Eduardo|||0000-0002-9745-8485
[EN] A novel screen-printing fabrication method was used to prepare organic electrochemical transistors (OECTs) based on poly(3,4-ethylenedioxythiophene) doped with polysterene sulfonate (PEDOT:PSS). Initially, three types of these screen-printed OECTs with a different channel and gate areas ratio were compared in terms of output characteristics, transfer characteristics, and current modulation in a phosphate buffered saline (PBS) solution. Results confirm that transistors with a gate electrode larger than the channel exhibit higher modulation. OECTs with this geometry were therefore chosen to investigate their ion-sensitive properties in aqueous solutions of cations of different sizes (sodium and rhodamine B). The effect of the gate electrode was additionally studied by comparing these all-PEDOT:PSS transistors with OECTs with the same geometry but with a non-polarizable metal gate (Ag). The operation of the all-PEDOT:PSS OECTs yields a response that is not dependent on a Na+ or rhodamine concentration. The weak modulation of these transistors can be explained assuming that PEDOT:PSS behaves like a supercapacitor. In contrast, the operation of Ag-Gate OECTs yields a response that is dependent on ion concentration due to the redox reaction taking place at the gate electrode with Cl&#8722; counter-ions. This indicates that, for cation detection, the response is maximized in OECTs with non-polarizable gate electrodes., Financial support from FEDER and Spanish Government funds (MAT2015-64139-C4-3-R (MINECO/FEDER)) and GVA funds (AICO/2015/103) are gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrocardiographic imaging including intracardiac information to achieve accurate global mapping during atrial fibrillation

  • Cámara-Vázquez, Miguel Ángel
  • Hernández-Romero, Ismael
  • Rodrigo, Miguel
  • Alonso-Atienza, Felipe
  • Figuera, Carlos
  • Morgado-Reyes, Eduardo
  • Atienza, Felipe
  • Barquero-Pérez, Óscar
  • Guillem Sánchez, María Salud|||0000-0001-5660-3693
  • Andreu M. Climent|||0000-0002-7260-8811
[EN] Atrial fibrillation (AF) is characterized by complex and irregular propagation patterns. Noninvasive electrocardiographic imaging (ECGI) has been tested during AF conditions with promising results. However, current regularization methods face important challenges in this type of unstable electrical activity scenarios. Combination of intracardiac and non-invasive simultaneous recordings could improve ECGI performance and allow real-time global mapping of complex AF patterns. In this work, we propose an ECGI method that incorporates intracardiac measurements as a constraint in a reformulation of the classical Tikhonov method. We used realistic mathematical models of atria and torso that simulates a wide number of epicardial electrical activity patterns. Body surface potentials were obtained from simulated electrograms (EGMs) by using Boundary Element Method and corrupted with Gaussian noise. Epicardial potentials were estimated using inverse problem with Tikhonov regularization, including intracavitary information as a second constraint. Results showed that first-order Constrained Tikhonov formulation provided more reliable reconstructions than the classical Tikhonov approach in AF conditions using at least 32 uniformly distributed endocardial EGMs (CC between 0.87 and 0.28, depending on the AF complexity). Constrained Tikhonov provided more accurate spatial mass functions (SMF) of PS locations (CC smF between 0.24 and 0.86). This methodology was tested on real patient data, obtaining a mean DF RMSE of 0.85 Hz, outperforming the classical Tikhonov approach. Limitations of this study include the fact that the model considered endocardium and epicardium as a single layer. Further research will include endocardium-epicardium bilayer model approximations and validation using more real patient data., This work has been partially supported by projects TEC2016-75361R and PID2019-105032GB-I00 from the Spanish Ministry of Economy and Spanish Ministry of Science and Innovation, respectively, projects IJCI-2014-22178, PI16-01123, DTS16/00160, PI17/0159, PI17/01106 from the Spanish Ministry of Economy through the Carlos III Health Institute with FEDER founds, grant GVA APOSTD/2017/068 and projects AICO/2018/267, GV/2018/103 from the Education, Research, Culture and Sports department of Generalitat Valenciana, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Diseño y caracterización de sensores para la medida de parámetros químicos y biológicos mediante Organic Thin-film transistors

  • Pérez Fuster, Clara|||0000-0003-0722-427X
[ES] RESUMEN La Electrónica Orgánica ha experimentado un gran avance en las últimas décadas, desde que en los años 70 se descubrieran los polímeros conductores. Las características únicas de los semiconductores orgánicos, han permitido el desarrollo de dispositivos electrónicos flexibles y con múltiple funcionalidad, mediante técnicas de fabricación a temperatura ambiente y bajo coste. Uno de los campos en los que estos dispositivos orgánicos han despertado mayor interés es el de su aplicación como sensores. En particular, los sensores basados en los denominados Transistores Orgánicos de película delgada (OTFT's) han experimentado un gran desarrollo debido a sus múltiples ventajas, como simplicidad, elevada sensibilidad, y posibilidad de miniaturización. Existen dos tipos principales de OTFT's: Transistor Orgánico de Efecto de Campo (OFET) y Transistor Electroquímico Orgánico (OECT). Los OECT's constan de tres electrodos (surtidor, drenador y puerta), un semiconductor orgánico (OSC), y un electrolito en contacto con el semiconductor. El funcionamiento de los sensores basados en OECT's se basa en la modulación de la corriente del canal por dopaje o de-dopaje electroquímico desde el electrolito, cuando se aplican tensiones de puerta. Los OECT's resultan especialmente adecuados como sensores químicos debido a su capacidad de operar en medios acuosos. En este trabajo, se han desarrollado OECT's basados en el OSC PEDOT:PSS mediante tecnología Screen-printing. Los transistores se han diseñado variando su geometría, parámetro del que depende la sensibilidad del sensor. Mediante la caracterización eléctrica de los OECT's, se ha podido determinar la geometría óptima en función del analito a detectar. Finalmente, se ha comprobado experimentalmente la validez de estos OECT's como sensores de cationes de diferentes tamaños y de ácido ascórbico, obteniéndose resultados muy satisfactorios. Los OFET's, se han preparado depositando el OSC sobre el dieléctrico y para obtener el canal cuya corriente se modula con la tensión aplicada al electrodo de puerta. En la mayoría de los sensores basados en OFET's, el semiconductor está expuesto al analito. Su funcionamiento se basa en la modificación de la corriente del canal por dopaje o captura de cargas en presencia del analito. En este trabajo, se han desarrollado OFET's basados en TIPS-Pentacene mediante las tecnologías Drop-casting y Spin-coating. Tras establecer la mejor técnica de deposición del semiconductor orgánico se han caracterizado eléctricamente los OFET's. La caracterización eléctrica de estos transistores orgánicos es fundamental para optimizar su uso como sensores químicos. No obstante, las propiedades únicas de los OSC's dificultan la caracterización eléctrica de estos dispositivos con los equipos comerciales actuales, diseñados todos ellos para la caracterización de transistores de Silicio. Para suplir esta necesidad, se ha diseñado un equipo para la caracterización de transistores orgánicos, utilizando componentes comerciales de bajo coste y un software desarrollado específicamente para la determinación de los parámetros característicos de OECT's y OFET's fijados en la norma estándar IEEE 1620-2008., [CA] RESUM La Electrònica Orgànica ha experimentat un gran avanç en les últimes dècades, des que en els anys 70 es descobrissin els polímers conductors. Les característiques úniques dels semiconductors orgànics, han permès el desenvolupament de dispositius electrònics flexibles i amb múltiple funcionalitat, mitjançant tècniques de fabricació a temperatura ambient i baix cost. Un dels camps en què aquests dispositius orgànics han despertat més interès és el de la seva aplicació com a sensors. En particular, els sensors basats en els denominats Transistors Orgànics de pel·lícula prima (OTFT s) han experimentat un gran desenvolupament a causa dels seus múltiples avantatges, com simplicitat, elevada sensibilitat, i possibilitat de miniaturització. Hi ha dos tipus principals de OTFT s: Transistor Orgànics d'Efecte de Camp (OFET) i Transistor Electroquímic Orgànic (OECT). Els OECT's consten de tres elèctrodes (sortidor, drenador i porta), un semiconductor orgànic (OSC), i un electròlit en contacte amb el semiconductor. El funcionament dels sensors basats en OECT's es basa en la modulació del corrent del canal per dopatge o de-dopatge electroquímic des del electròlit, quan s'apliquen tensions de porta. Els OECT's resulten especialment adequats com a sensors químics per la seva capacitat d'operar en mitjans aquosos. En aquest treball, s'han desenvolupat OECT's basats en el OSC PEDOT: PSS mitjançant tecnologia Screen-printing. Els transistors s'han dissenyat variant la seua geometria, paràmetre del qual depèn la sensibilitat del sensor. Mitjançant la caracterització elèctrica dels OECT's, s'ha pogut determinar la geometria òptima en funció de l'analit a detectar. Finalment, s'ha comprovat experimentalment la validesa d'aquests OECT's com a sensors de cations de diferents mides i d'àcid ascòrbic, obtenint-se resultats molt satisfactoris. Els OFET's, s'han preparat dipositant el OSC sobre el dielèctric per obtenir el canal i la corrent es modula amb la tensió aplicada a l'elèctrode de porta. En la majoria dels sensors basats en OFET's, el semiconductor està exposat al analit. El seu funcionament es basa en la modificació del corrent del canal per dopatge o captura de càrregues en presència de l'analit. En aquest treball, s'han desenvolupat OFET's basats en TIPS-Pentacene mitjançant les tecnologies "Drop-càsting" i "Spin-coating". Després d'establir la millor tècnica de deposició del semiconductor orgànic s'han caracteritzat elèctricament els OFET's La caracterització elèctrica d'aquests transistors orgànics és fonamental per optimitzar el seu ús com a sensors químics. No obstant això, les propietats úniques dels OSC's dificulten la caracterització elèctrica d'aquests dispositius amb els equips comercials actuals, dissenyats tots ells per a la caracterització de transistors de silici. Per suplir aquesta necessitat, s'ha dissenyat un equip per a la caracterització de transistors orgànics, utilitzant components comercials de baix cost i un programari desenvolupat específicament per a la determinació dels paràmetres característics de OECT's i OFET's fixats en la norma estàndard IEEE 1620-2008., [EN] ABSTRACT Organic Electronics has been extensively developed along these past decades, since the discovery of conducting polymers in the 1970s. The unique features that these organic semiconductors can offer have allowed the development of many electronic devices with mechanical flexibility and multiple functionalities, using low-temperature and low-cost fabrication technologies. These organic devices have attracted considerable interest for their use in many fields, especially for sensing applications. In particular, Organic Thin-Film Transistors (OTFTs) have paved the way towards the fabrication of efficient sensors due to their many advantages, such as simplicity, high sensitivity, and facile miniaturization. OTFTs can be classified into two types of transistors: Organic Field Effect Transistors (OFET) and Organic Electrochemical Transistors (OECT). The essential components of an OECT are an organic semiconductor film, three electrodes (source, drain and gate), and an electrolyte bridging the semiconductor and the gate electrode. The operation of an OECT-based sensor lies on the modulation of the channel current by electrochemical doping or de-doping from the electrolyte, when gate voltages are applied. OECTs have attracted considerable interest for their application as chemical sensors due to their ability to operate in aqueous environments. In this work, PEDOT: PSS-based OECTs have been prepared by Screen-printing. The effect of the geometry on the sensor sensitivity has been investigated by comparing OECTs with different channel and gate areas ratio. The electrical characteristics of the OECTs have been used to determine the geometry that optimizes their performance for sensing different analytes. Finally, the use of these OECTs for the detection of cations and ascorbic acid has been experimentally assessed, with satisfactory and promising results. The OFET's have been prepared by depositing the organic semiconductor on the dielectric and thus obtain the chanel whose current is modulated by the voltage applied to the gate electrode. In most of the OFET-based sensors, the semiconductor is exposed to the analyte. Their operation is based on the modification of the channel current by charge doping or trapping due to the analyte. In this work, OFETs based on TIPS-pentacene have been prepared by Drop-casting and Spin-coating. The best technique for deposition of this organic semiconductor has been initially identified. Then, the electrical characteristics of these OFETs have been determined. The electrical characterization of these organic transistors is essential for their optimization as chemical sensors. However, the unique properties of organic semiconductors render difficult the electrical characterization of these transistors with current commercial devices, since these have been all designed for characterizing Si-based transistors. A device which allows for systematic characterization of organic transistors has been designed therefore, using low-cost commercial components and a software that has been specifically developed for the determination of the reporting parameters for OFETs and OECTs, as specified in the IEEE 1620-2008 standard., El trabajo desarrollado en los artículos ha sido posible gracias a los distintos proyectos de investigación de financiación pública dentro del marco de proyectos del Ministerio de Educación y Ciencia del Gobierno de España/Fondos FEDER (grant number MAT2015-64139-C4-3-R (MINECO/FEDER)) y Fondos de la Generalitat Valenciana (grant number AICO/2015/103).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

SLA-driven dynamic cloud resource management

  • García García, Andrés
  • Hernández García, Vicente
  • Blanquer Espert, Ignacio|||0000-0003-1692-8922
As the size and complexity of Cloud systems increase, the manual management of these solutions becomes a challenging issue as more personnel, resources and expertise are needed. Service Level Agreement (SLA)- aware autonomic cloud solutions enable managing large scale infrastructure management meanwhile supporting multiple dynamic requirement from users. This paper contributes to these topics by the introduction of Cloudcompaas, a SLA-aware PaaS Cloud platform that manages the complete resource lifecycle. This platform features an extension of the SLA specification WS-Agreement, tailored to the specific needs of Cloud Computing. In particular, Cloudcompaas enables Cloud providers with a generic SLA model to deal with higher-level metrics, closer to end-user perception, and with flexible composition of the requirements of multiple actors in the computational scene. Moreover, Cloudcompaas provides a framework for general Cloud computing applications that could be dynamically adapted to correct the QoS violations by using the elasticity features of Cloud infrastructures. The effectiveness of this solution is demonstrated in this paper through a simulation that considers several realistic workload profiles, where Cloudcompaas achieves minimum cost and maximum efficiency, under highly heterogeneous utilization patterns. © 2013 Elsevier B.V. All rights reserved., This work has been developed under the support of the program Formacion de Personal Investigador de Caracter Predoctoral grant number BFPI/2009/103, from the Conselleria d'Educacio of the Generalitat Valenciana. Also, the authors wish to thank the financial support received from The Spanish Ministry of Education and Science to develop the project 'CodeCloud', with reference TIN2010-17804.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

M-QAM signal transmission at the photonically generated K-band over thermal-induced turbulent FSO links with different turbulence distributions

  • Vallejo-Castro, Luis
  • Nguyen, Dong-Nhat
  • Bohata, Jan
  • Zvanovec, Stanislav
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] We present a theoretical and experimental study on the impact of different thermal-induced free-space turbulence distributions on the M-quadrature amplitude modulation (M-QAM) signal transmission in radio frequency K-band over hybrid optical links of standard single mode fiber (SSMF) and free-space optics (FSO). Frequency multiplication using an external intensity modulator biased at the null transmission point has been employed to photonically generate radio signals at a frequency of 25 GHz, included for the frequency bands for fifth-generation (5G) mobile networks. Moreover, extensive simulations have been performed for 10 Gb/s with 4-, 16-, and 64-QAM over 5 km of SSMF and 500 m long FSO channels under scenarios with different turbulence levels and distributions. Proof-of-concept experiments have been conducted for 20 MHz with 4- and 64-QAM over 5 km of SSMF and 2 m long FSO channels under turbulence conditions. Both theoretical and experimental systems have been analyzed in terms of error vector magnitude (EVM) performance showing feasible transmission over the hybrid links in the received optical power range. Non-uniform turbulence distributions are shown to have a different impact on M-QAM modulation formats, i.e., turbulence distributions with higher strength in the middle of the FSO link reveal a 1.9 dB penalty when using 64-QAM signals compared to a 1.3 dB penalty using 4-QAM signals, whereas higher penalties have been measured when 4-QAM format is transmitted over turbulence distributions with larger magnitude in the second half of the FSO link. The results have been validated by theoretical predictions and lead to practical consequences on future networks' deployment., Generalitat Valenciana (PROMETEO 2017/103); Ministerio de Ciencia, Innovacion y Universidades (FOCAL RTI2018-101658-B-I00); Ministerstvo Prumyslu a Obchodu (FV30427) and within European Cooperation in Science andTechnology (CA16220).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Collaboration and Decision Making in Crisis Situations

  • Vivacqua, Adriana S.
  • Garcia, Ana Cristina B.
  • Comes, Martina
  • Vieira, Vaninha
  • Canos Cerda, José Hilario|||0000-0001-8139-5195
[EN] Emergencies are critical situations that demand immediate action to avoid adverse consequences to life and property. Recent events around the world highlight the importance of the theme. A key challenge in Emergency Management is decision-making under time pressure, with an overload of unconfirmed, uncertain and conflicting information, including the management of many people, with distinct and possibly fluid roles, in different places. Collaboration in these settings is an interesting element, since emergency response generally involves multiple agencies and the public, which, having different views, protocols and priorities, must act in concert to handle the situation. In addition, an increasing amount of virtual information is necessary to inform and manage volunteers. The goal of this workshop is to identify and map the main challenges of collaboration in crisis situations, review current research methods and approaches to address them and address the lack of formal processes, structures, methodologies and tools., Adriana S Vivacqua is partially supported by CNPq grant 308425/2012-0 and FAPERJ grant E26/103.029/2012. Vaninha Vieira is partially supported by CNPq grant 490084/2013-3
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Detection, discrimination and absolute quantitation of Tomato spotted wilt virus isolates using real time RT-PCR with TaqMan®MGB probes

  • Debreczeni, Diana Elvira
  • Ruiz Ruiz, Susana
  • Aramburu, J.
  • Belliure Ferrer, Belén Reyes
  • Galipienso Torregrosa, Luis
  • Rubio, L.
  • López Del Rincón, Carmelo|||0000-0001-7459-1315
  • Soler Aleixandre, Salvador|||0000-0001-8325-3326
A quantitative real-time reverse transcription-polymerase chain reaction (RT-qPCR) procedure using a general primer set and three TaqMan (R) MGB probes was developed for general and genotype-specific detection and quantitation of the genomic M segment of Tomato spotted wilt virus (TSWV). Standard curves using RNA transcripts homologous to the three probes allowed reproducible quantitative assays with a wide dynamic range (10(3)-10(10) TSWV M segment RNA copies/ng of total RNA) and high sensitivity. This protocol was assayed with a battery of TSWV isolates, covering the range of the present known genetic variation, in single and/or mix infections in three plant hosts, as well as in the thrips vector Frankliniella occidenialis. This quantitative detection assay will be a valuable tool for molecular biology and epidemiology studies, diagnosis and disease control., This work was supported by grants INIA RTA2008-00010-C03 and Generalitat Valenciana ACOMP/2009/103 and ACOMP/2010/085. D.E. Debreczeni is the recipient of a FPU pre-doctoral fellowship from MEC and B. Belliure was supported by a INIA-CCAA contract. We thank I. Ferriol, Dr. S. Ambros and Dr. A. Olmos for technical advice; Dolores Comin for technical assistance; Dr. D. Peters and Dr. J. Contreras for kindly providing the TSWV isolate BR01 and a thrips colony, respectively; and Daniel R. Pearce for English revision.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Edge computing and iot analytics for agile optimization in intelligent transportation systems

  • Peyman, Mohammad
  • Copado, Pedro J.
  • Tordecilla, Rafael D.
  • do C. Martins, Leandro
  • Xhafa, Fatos
  • Juan, Angel A.|||0000-0003-1392-1776
[EN] With the emergence of fog and edge computing, new possibilities arise regarding the data-driven management of citizens' mobility in smart cities. Internet of Things (IoT) analytics refers to the use of these technologies, data, and analytical models to describe the current status of the city traffic, to predict its evolution over the coming hours, and to make decisions that increase the efficiency of the transportation system. It involves many challenges such as how to deal and manage real and huge amounts of data, and improving security, privacy, scalability, reliability, and quality of services in the cloud and vehicular network. In this paper, we review the state of the art of IoT in intelligent transportation systems (ITS), identify challenges posed by cloud, fog, and edge computing in ITS, and develop a methodology based on agile optimization algorithms for solving a dynamic ride-sharing problem (DRSP) in the context of edge/fog computing. These algorithms allow us to process, in real time, the data gathered from IoT systems in order to optimize automatic decisions in the city transportation system, including: optimizing the vehicle routing, recommending customized transportation modes to the citizens, generating efficient ride-sharing and car-sharing strategies, create optimal charging station for electric vehicles and different services within urban and interurban areas. A numerical example considering a DRSP is provided, in which the potential of employing edge/fog computing, open data, and agile algorithms is illustrated., This work was partially supported by the Spanish Ministry of Science (PID2019111100RB-C21/AEI/10.13039/501100011033, RED2018-102642-T), and the Erasmus+ program (2019I-ES01-KA103-062602).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structural and vibrational study of cubic Sb2O3 under high pressure

  • Pereira, A. L. J.
  • Gracia, L.
  • Santamaría-Pérez, D.
  • Errandonea, D.
  • Nalin, M.
  • Beltrán, A.
  • Vilaplana Cerda, Rosario Isabel|||0000-0003-0504-2157
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
We report an experimental and theoretical study of antimony oxide (Sb 2O 3) in its cubic phase (senarmontite) under high pressure. X-ray diffraction and Raman scattering measurements up to 18 and 25 GPa, respectively, have been complemented with ab initio total-energy and lattice-dynamics calculations. X-ray diffraction measurements do not provide evidence of a space-group symmetry change in senarmontite up to 18 GPa. However, Raman scattering measurements evidence changes in the pressure coefficients of the Raman mode frequencies at 3.5 and 10 GPa, respectively. The behavior of the Raman modes with increasing pressure up to 25 GPa is fully reproduced by the lattice-dynamics calculations in cubic Sb 2O 3. Therefore, the combined analysis of both experiments and lattice-dynamics calculations suggest the occurrence of two isostructural phase transformations at 3.5 and 10 GPa, respectively. Total-energy calculations show that the isostructural phase transformations occur through local atomic displacements in which senarmontite loses its molecular character to become a three-dimensional solid. In addition, our calculations provide evidence that cubic senarmontite cannot undergo a phase transition to orthorhombic valentinite at high pressure, and that a phase transition to a ß-Bi 2O 3-type structure is possible above 25 GPa. © 2012 American Physical Society., Financial support from the Spanish Consolider Ingenio 2010 Program (Project No. CDS2007-00045) is acknowledged. The work was also supported by Spanish MICCIN under Projects No. CTQ2009-14596-C02-01 and No. MAT2010-21270-C04-01/04 as well as from Comunidad de Madrid and European Social Fund, S2009/PPQ-1551 4161893 (QUIMAPRES) and from Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia under projects UPV2011-0914 PAID-05-11 and UPV2011-0966 PAID-06-11. Spanish Fundacio Bancaixa Project No. P1-1A2009-08 and Brazilian Capes/Fundacion Carolina (BEX 3939/10-3) are also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of atrial arrhythmias in body surface potential mapping: A computational study

  • Gonçalves Marques, Victor
  • RODRIGO BORT, MIGUEL
  • Salinet, Joao
  • Guillem Sánchez, María Salud|||0000-0001-5660-3693
[EN] Purpose: Atrial tachycardia (AT), flutter (AFL) and fibrillation (AF) are very common cardiac arrhythmias and are driven by localized sources that can be ablation targets. Non-invasive body surface potential mapping (BSPM) can be useful for early diagnosis and ablation planning. We aimed to characterize and differentiate the arrhythmic mechanisms behind AT, AFL and AF from the BSPM perspective using basic features reflecting their electrophysiology. Methods: 19 simulations of 567-lead BSPMs were used to obtain dominant frequency (DF) maps and estimate the atrial driving frequencies using the highest DF (HDF). Regions with vertical bar DF - HDF vertical bar <= 1Hz were segmented and characterized (size, area); the spatial distribution of the differences |DF -atrial HDF estimate vertical bar was qualitatively analyzed. Phase singularity points (SPs) were detected on maps generated with Hilbert transform after band-pass filtering around the HDF (1Hz). Connected SPs along time (filaments) and their histogram (heatmaps) were used for rotational activity characterization (duration, spatiotemporal stability). Results were reproduced in clinical layouts (252 to 12 leads) and with different rotations and translations of the atria within the torso, and compared with the original 567-lead outcomes using structural similarity index (SSIM) between maps, sensitivity and precision in SP detection and direct feature comparison. Random forest and least-square based algorithms were used to classify the arrhythmias and their mechanisms' location, respectively, based on the obtained features. Results: Frequency and phase analyses revealed distinct behavior between arrhythmias. AT and AFL presented uniform DF maps with low variance, while AF maps were more heterogeneous. Lower differences from the atrial HDF regions correlated with the driver location. Rotational activity was most stable in AFL, followed by AT and AF. Features were robust to lower spatial resolution layouts and modifications in the atrial geometry; DF and heatmaps presented decreasing SSIM along the layouts. The classification of the arrhythmias and their mechanisms' location achieved balanced accuracy of 72.0% and 73.9%, respectively. Conclusion: Non-invasive characterization of AT, AFL and AF based on realistic models highlights intrinsic differences between the arrhythmias, enhancing the BSPM utility as an auxiliary clinical tool., This study was supported in part by grants from Sao Paulo Research Foundation (2017/19775-3), Instituto de Salud Carlos III Research Foundation, Fondo Europeo de Desarrollo Regional FEDER, Spain (PI17/01106), and Generalitat Valenciana, Spain (AICO/2018/26,7 APOSTD/2017, GVA/2018/103).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Programmable True Time Delay Lines Using Integrated Waveguide Meshes

  • Pérez-López, Daniel
  • Sánchez-Gomáriz, Erica
  • Capmany Francoy, José|||0000-0002-6460-4167
[EN] We analyze and explore the potential that waveguide-mesh-based architectures used in programmable photonic integrated circuits can be configured to enable true time optical delay lines, which can find applications in different microwave photonics functionalities, such as beamforming and optical filtering. We also propose and experimentally demonstrate an alternative standalone tunable basic unit (TBU) architecture where its internal coupling device is implemented by means of a dual-drive tunable directional coupler (DD-TDC) that performs independent amplitude beam splitting and phase shifting. Compared to the previous alternatives based on 3-dB balanced Mach-Zehnder interferometers, the DD-TDC reduces by more than two times the insertion losses of TBUs enabling the potential realization of larger meshes with a three-fold enhanced step-time resolution. Bandwidth and robustness analysis are also considered., This work was supported in part by the European Research Council under Grant ERC-ADG-2016-471715 UMWP-CHIP, in part by the COST Action CA16220 EUWMP, in part by the Spanish MINECO Projects TEC2014-60378-C2-1-R, and in part by the Gen. Valenciana PROMETEO Project 2017/103.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Combining Parallel Computing and Biased Randomization for Solving the Team Orienteering Problem in Real-Time

  • Panadero, Javier
  • Ammouriova, Majsa
  • Agustin, Alba
  • Nogal, Maria
  • Serrat, Carles
  • Juan, Angel A.|||0000-0003-1392-1776
[EN] In smart cities, unmanned aerial vehicles and self-driving vehicles are gaining increased concern. These vehicles might utilize ultra-reliable telecommunication systems, Internet-based technologies, and navigation satellite services to locate their customers and other team vehicles to plan their routes. Furthermore, the team of vehicles should serve their customers by specified due date efficiently. Coordination between the vehicles might be needed to be accomplished in real-time in exceptional cases, such as after a traffic accident or extreme weather conditions. This paper presents the planning of vehicle routes as a team orienteering problem. In addition, an 'agile' optimization algorithm is presented to plan these routes for drones and other autonomous vehicles. This algorithm combines an extremely fast biased-randomized heuristic and a parallel computing approach., This work has been partially supported by the Spanish Ministry of Science and Innovation (PID2019-111100RB-C21/AEI/10.13039/501100011033, RED2018-102642-T). We also acknowledge the support of the Erasmus+ Program (2019-I-ES01-KA103-062602)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Frame-based mapping mechanism for energy-efficient MPEG-4 video transmission over IEEE 802.11e networks with better quality of delivery

  • Ke, Chih-Heng
  • Yang, Chong-Yi
  • Chen, Jiann-Liang
  • Ghafoor, Kayhan Zrar
  • Lloret, Jaime|||0000-0002-0862-0533
Recent developments in hardware, software and communication technologies have resulted in increasing interest in the use of wireless local area networks (WLANs). Mobile devices with embedded WLAN functionality are becoming increasingly popular. Such devices must be designed to support applications that require high quality of service (QoS) and have favorable to maximize battery capacity. The resources of queues in IEEE 802.11e networks may be wasted by the transmission of information that is useless to the receiver. This work develops a frame-based mapping mechanism (FBM) that exploits different methods to process I/P/B (Intra/Predictive/Bipredictive) video frame packets. FBM refers to the dropping of arriving packets if the preceding packets in the same video frame have been dropped. When fragmented packets of a single frame are allocated to different access categories (AC) queues, out-of order delivery may occur. Hence, FBM tries to treat all fragmented packets of each video frame equally and allocates them to the same AC queue if possible. The simulation results demonstrate that transmission by the FBM is more efficient than that by other mechanisms, such as EDCA (Enhanced Distributed Channel Access), static mapping and adaptive mapping, suggesting that the energy of a device is not wasted in the transmission of useless video data in WLANs. (C) 2015 Elsevier Ltd. All rights reserved., Foundation item: The National Project of Taiwan (No.: MOST 103-2221-E507-001). Authors are grateful to Ministry of Science and Technology Grant no. (MOST 103-2221-E507-001), Government of Taiwan for financial support to carry out this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A geostatistical approach for dynamic life tables: The effect of mortality on remaining lifetime and annuities

  • Debón, A.|||0000-0002-5116-289X
  • Martinez Ruiz, F.
  • Montes, F.
Dynamic life tables arise as an alternative to the standard (static) life table, with the aim of incorporating the evolution of mortality over time. The parametric model introduced by Lee and Carter in 1992 for projected mortality rates in the US is one of the most outstanding and has been used a great deal since then. Different versions of the model have been developed but all of them, together with other parametric models, consider the observed mortality rates as independent observations. This is a difficult hypothesis to justify when looking at the graph of the residuals obtained with any of these methods. Methods of adjustment and prediction based on geostatistical techniques which exploit the dependence structure existing among the residuals are an alternative to classical methods. Dynamic life tables can be considered as two-way tables on a grid equally spaced in either the vertical (age) or horizontal (year) direction, and the data can be decomposed into a deterministic large-scale variation (trend) plus a stochastic small-scale variation (residuals). Our contribution consists of applying geostatistical techniques for estimating the dependence structure of the mortality data and for prediction purposes, also including the influence of the year of birth (cohort). We compare the performance of this new approach with different versions of the Lee–Carter model. Additionally, we obtain bootstrap confidence intervals for predicted qxt resulting from applying both methodologies, and we study their influence on the predictions of e65t and a65t . © 2010 Elsevier B.V. All rights reserved., This work was partially supported by grants from the MEyC (Ministerio de Educacin y Ciencia, Spain project MTM2007-62923 and project MTM2008-05152) The research by Ana Debon and Francisco Martinez-Ruiz has also been partially supported by a grant from the Generalitat Valenciana (grant No GVPRE/2008/103)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Simulation, optimization, and machine learning in sustainable transportation systems: Models and applications

  • Torre-Martínez, María Rocío de la|||0000-0002-8662-8901
  • Juan, Angel A.|||0000-0003-1392-1776
  • Corlu, Canan G.
  • Faulin, Javier
  • Onggo, Bahkti S.
[EN] The need for effective freight and human transportation systems has consistently increased during the last decades, mainly due to factors such as globalization, e-commerce activities, and mobility requirements. Traditionally, transportation systems have been designed with the main goal of reducing their monetary cost while offering a specified quality of service. During the last decade, however, sustainability concepts are also being considered as a critical component of transportation systems, i.e., the environmental and social impact of transportation activities have to be taken into account when managers and policy makers design and operate modern transportation systems, whether these refer to long-distance carriers or to metropolitan areas. This paper reviews the existing work on different scientific methodologies that are being used to promote Sustainable Transportation Systems (STS), including simulation, optimization, machine learning, and fuzzy sets. This paper discusses how each of these methodologies have been employed to design and efficiently operate STS. In addition, the paper also provides a classification of common challenges, best practices, future trends, and open research lines that might be useful for both researchers and practitioners., This work has been partially supported by the Spanish Ministry of Science, Innovation, and Universities (PID2019-111100RB-C21-C22/AEI/10.13039/501100011033, RED2018-102642-T) and the SEPIE Erasmus+ Program (2019-I-ES01-KA103-062602), and the IoF2020-H2020 (731884) project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A reliability-extended simheuristic for the sustainable vehicle routing problem with stochastic travel times and demands

  • Abdullahi, Hassana
  • Reyes-Rubiano, Lorena
  • Ouelhadj, Djamila
  • Faulin, Javier
  • Juan, Angel A.|||0000-0003-1392-1776
[EN] Real-life transport operations are often subject to uncertainties in travel time or customers' demands. Additionally, these uncertainties greatly impact the economic, environmental, and social costs of vehicle routing plans. Thus, analysing the sustainability costs of transportation activities and reliability in the presence of uncertainties is essential for decision makers. Accordingly, this paper addresses the Sustainable Vehicle Routing Problem with Stochastic Travel times and Demands. This paper proposes a novel weighted stochastic recourse model that models travel time and demand uncertainties. To solve this challenging problem, we propose an extended simheuristic that integrates reliability analysis to evaluate the reliability of the generated solutions in the presence of uncertainties. An extensive set of computational experiments is carried out to illustrate the potential of the proposed approach and analyse the influence of stochastic components on the different sustainability dimensions., This work has been developed by the University of Portsmouth, Cardiff Metropolitan University and partially supported by the SEPIE Erasmus+ Program (2019-I-ES01-KA103-062602) in collaboration with the Public University of Navarre, the Petroleum Technology Development Fund (PTDF/E/OSS/PHD/HAH/699/14), and the Spanish Ministry of Science and Innovation (PID2019-111100RB-C21-C22 /AEI/ 10.13039/ 501100011033, RED2018-102642-T, the Barcelona City Council and "La Caixa" (21S09355-001)).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Towards efficient stream monitoring: A systematic approach for model selection and continuous improvement in Tiny Machine Learning applications

  • Arratia-Uribe, Benjamín Andrés|||0000-0001-7869-053X
  • Rosas-Olivos, Erika Susana
  • Prades, Javier|||0000-0003-3349-2200
  • Cecilia-Canales, José María|||0000-0001-5648-214X
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Peña-Haro, Salvador
[EN] Measuring ephemeral stream flows is essential for ecological and hydrological studies. However, their intermittent nature and remote locations pose challenges for conventional monitoring methods, which often consume excessive energy to capture rare events. We address this with BODOQUE (Bimodal Observational Device for Optimizing Quantification of Ephemeral streams), a dual-mode system that leverages Tiny Machine Learning (TinyML) on low-power microcontrollers. The system remains in an energy-saving sensing state and activates high-precision measurements only when water flow is detected. We present a model selection methodology that balances detection accuracy with inference cost, enabling reliable operation within hardware constraints. To enhance adaptability in diverse environments, we developed a specialized component that facilitates dataset expansion through new field samples. This supports ongoing retraining to maintain model performance under changing conditions. A comprehensive evaluation using real-world data demonstrates that our system can achieve up to 97% annual energy savings compared to traditional continuous monitoring approaches., This work has been supported by the European Union s Horizon 2020 research and innovation program under grant agreement No. 101017861 and by the MCSA-SE REMARKABLE grant ID: 101086387. Additionally, it has received funding from the Ramón y Cajal Grant RYC2018-025580-I, supported by MCIN/AEI/10.13039/501100011 033 and ESF Investing in Your Future, as well as from GVA GRISOLIAP/ 2021/103 and Grant TED2021-130890B, funded by MCIN/AEI and the European Union NextGenerationEU/PRTR. This work was also partially supported by the research project CIPROM/2023/29, funded by the Direcció General de Ciència i Investigació of the Generalitat Valenciana, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thermo-Optic Phase Tuners Analysis and Design for Process Modules on a Silicon Nitride Platform

  • Alemany Server, Ruben
  • P. Muñoz|||0000-0001-6026-1649
  • Pastor Abellán, Daniel|||0000-0002-5297-3918
  • Domínguez, Carlos
[EN] In this paper, we present a systematic design for manufacturing analysis for thermo-optic phase tuners, framed within the process modules available on a silicon nitride platform. Departing from an established technology platform, the heat distribution in various micro-structures was analyzed, both in steady and transient states, employing a 2D heat transfer model solved numerically. Multi-parametric simulations were performed on designs combining trenches and substrate undercut, by varying their position and dimensions. The simulation results were compared to a reference conventional fully-clad cross-section. Deep air-filled trenches are shown to reduce the power consumption up to 70%, alongside a thermal crosstalk phase shift reduction of more than one order of magnitude (0.045 pi rad/mm), at the expense of a slightly lower bandwidth (11.8 kHz). The design with trenches and substrate undercut lowers the power consumption up to 97%, decreases two orders of magnitude the crosstalk (0.006 pi rad/mm), at the cost of less than one order of magnitude in bandwidth (0.9 kHz). In the works, we selected three different heater materials (Cr/Au, Al, poly-silicon) offered by the fab and four different heater widths (2.5 to 7 mu m). Their combinations are related to performance, reliability and durability of the devices, strongly linked to temperature, current density, and Omegaic resistance. The different figures of merit defined, and the methodology followed, can be mimicked by future designers to take design decisions at bird's eye., Funding This research was funded by Ministry of Economy, Industry and Competitiveness grants numbers TEC2016-80385-P SINXPECT and PID2019-110877GB-I00 BHYSINPICS, Generalitat Valenciana grant number PROMETEO/2017/103, Ministry of Science, Innovation and Universities grant number MCIU-RTI2018-100773-B-C31 and by H2020 Marie Sklodowska Curie Innovative Training Network grant number MICROCOMB (GA 812818).