Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 58
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Band Alignment and Photoresponse of LaFe O3 -Based Heterojunctions

  • Sheng, Yunwei|||0000-0001-8173-0483
  • Mirjolet, Mathieu|||0000-0002-8471-3184
  • Villa Navas, Mario|||0000-0003-2949-5628
  • Gázquez Alabart, Jaume|||0000-0002-2561-328X
  • Santiso, José|||0000-0003-4274-2101
  • Klein, Andreas
  • Fraxedas, Jordi|||0000-0002-2821-4831
  • Fontcuberta, Josep|||0000-0002-7955-2320
Epitaxial LaFeO3 (LFO)-based photocells, of different thicknesses (50-200 nm) have been grown on cubic LSAT (001) [(LaAlO3)0.3(Sr2TaAlO6)0.7] single-crystal substrates, using a La2/3Sr1/3MnO3 (LSMO) bottom electrode and different top electrodes [Pt,Ba0.95La0.05SnO3 (BLSO)], to determine their photoresponse. The measured short-circuit photocurrent first increases with LFO thickness and then decreases, and it is larger or smaller, when Pt or BLSO electrodes are used, respectively. The corresponding open-circuit voltage displays the opposite trend, being smaller or larger for Pt and BLSO, respectively, which is in excellent agreement with the electronic band alignments determined by x-ray photoelectron spectroscopy and also consistent with the rectifying character of the dark current-voltage data. It turns out that the films display a complex microstructure containing different variants, strained and relaxed, of the orthorhombic LaFeO3, that evolves with film thickness and entails the presence of strain gradients and, possibly, flexoelectric fields. We discuss these data and propose that the unavoidable grain boundaries between differently textured LaFeO3 crystallites play a significant role on the observed responsivity (2.6 × 10-4 A W-1), found to be larger than in related LFO-based structures.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hidden Magnetic States Emergent Under Electric Field, In A Room Temperature Composite Magnetoelectric Multiferroic

  • Clarkson, J. D.
  • Fina, Ignasi
  • Frontera, Carlos
  • Sánchez Barrera, Florencio
  • Fontcuberta, Josep
  • Ramesh, Ramamoorthy
Clarkson, J. D. et al., The ability to control a magnetic phase with an electric field is of great current interest for a variety of low power electronics in which the magnetic state is used either for information storage or logic operations. Over the past several years, there has been a considerable amount of research on pathways to control the direction of magnetization with an electric field. More recently, an alternative pathway involving the change of the magnetic state (ferromagnet to antiferromagnet) has been proposed. In this paper, we demonstrate electric field control of the Anomalous Hall Transport in a metamagnetic FeRh thin film, accompanying an antiferromagnet (AFM) to ferromagnet (FM) phase transition. This approach provides us with a pathway to “hide” or “reveal” a given ferromagnetic region at zero magnetic field. By converting the AFM phase into the FM phase, the stray field, and hence sensitivity to external fields, is decreased or eliminated. Using detailed structural analyses of FeRh films of varying crystalline quality and chemical order, we relate the direct nanoscale origins of this memory effect to site disorder as well as variations of the net magnetic anisotropy of FM nuclei. Our work opens pathways toward a new generation of antiferromagnetic – ferromagnetic interactions for spintronics., Te work at Berkeley was supported in part by FAME, one of six centers of STARnet, a Semiconductor Research Corporation program sponsored by MARCO and DARPA was supported by the SRC-FAME program. Financial support by the Spanish Government (Project MAT2014-56063-C2-1-R, MAT2015-73839-JIN, MAT2017- 85232-R and associated FEDER) and Generalitat de Catalunya (2014 SGR 734) is acknowledged. ICMAB-CSIC authors acknowledge fnancial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496). IF acknowledges Juan de la Cierva – Incorporación postdoctoral fellowship (IJCI-2014-19102) from the Spanish Ministry of Economy and Competitiveness of Spanish Government. XMCD-PEEM experiments were performed at CIRCE beamline at ALBA Synchrotron with the acknowledged collaboration of ALBA staf. Partial fnancial support from the 2014-Consolidator Grant "SPIN-PORICS" (Grant Agreement nº 648454) from the European Research Council is acknowledged. XM acknowledges support from the Grant Agency of the Czech Republic Grant no. 14-37427. Work at ORNL was sponsored by the Laboratory Directed Research and Development (LDRD) Programs of ORNL managed by UT-Battelle, LLC. Work at CSUN was supported by NSF under Grant No. 1205734, NSF Partnerships for Research and Education in Materials (PREM), and by NSF under Grant No. 1160504 NSF Nanosystems Engineering Research Center for Translational Applications of Nanoscale Multiferroic Systems (TANMS)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring Lattice Strain and Ferroelectric Polarization of Epitaxial BaTiO3 Thin Films on Si(001)

  • Lyu, Jike
  • Fina, Ignasi
  • Solanas, Raul
  • Fontcuberta, Josep
  • Sánchez Barrera, Florencio
Ferroelectric BaTiO3 films with large polarization have been integrated with Si(001) by pulsed laser deposition. High quality c-oriented epitaxial films are obtained in a substrate temperature range of about 300 °C wide. The deposition temperature critically affects the growth kinetics and thermodynamics balance, resulting on a high impact in the strain of the BaTiO3 polar axis, which can exceed 2% in films thicker than 100 nm. The ferroelectric polarization scales with the strain and therefore deposition temperature can be used as an efficient tool to tailor ferroelectric polarization. The developed strategy overcomes the main limitations of the conventional strain engineering methodologies based on substrate selection: it can be applied to films on specific substrates including Si(001) and perovskites, and it is not restricted to ultrathin films., Financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and the MAT2017-85232-R, MAT2014-56063- C2-1-R, and MAT2015-73839-JIN projects, and from Generalitat de Catalunya (2014 SGR 734) is acknowledged. IF acknowledges Juan de la Cierva – Incorporación postdoctoral fellowship (IJCI-2014-19102) from the Spanish Ministry of Economy and Competitiveness. JL is financially supported by China Scholarship Council (CSC) with No. 201506080019. JL work has been done as a part of his Ph.D. program in Materials Science at Universitat Autònoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Control of Polar Orientation and Lattice Strain in Epitaxial BaTiO3 Films on Silicon

  • Lyu, Jike
  • Estandía, Saúl
  • Gázquez, Jaume
  • Chisholm, Matthew F.
  • Fina, Ignasi
  • Dix, Nico
  • Fontcuberta, Josep
  • Sánchez Barrera, Florencio
Conventional strain engineering of epitaxial ferroelectric oxide thin films is based on the selection of substrates with suitable lattice parameter. Here we show that the variation of oxygen pressure during pulsed laser deposition is a flexible strain engineering method for epitaxial ferroelectric BaTiO3 films either on perovskite substrates or on Si(001) wafers. This unconventional growth strategy permits continuous tuning of strain up to high levels (ε>0.8%) in films of thickness exceeding of a hundred of nanometers, as well as selecting the polar axis orientation to be either parallel or perpendicular to the substrate surface plane., Financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and the MAT2017-85232-R (AEI/FEDER,UE), MAT2014-56063-C2-1-R, and MAT2015-73839-JIN projects, and from Generalitat de Catalunya (2014 SGR 734) is acknowledged. JL is financially supported by China Scholarship Council (CSC) with No. 201506080019. JL work has been done as a part of his Ph.D. program in Materials Science at Universitat Autònoma de Barcelona. J.G. acknowledges the RyC contract (RC-2012–11709). Electron microscopy observations at ORNL were supported by the U.S. Department of Energy (DOE), Basic Energy Sciences (BES), Materials Sciences and Engineering Division. Authors acknowledge the ICTS-CNME for offering access to their instruments and expertise. S.E. acknowledges the Spanish Ministry of Economy and Competitiveness for his PhD contract (SEV-2015-0496-16-3)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Selectable texture in epitaxial ferroelectric BaTiO3 films integrated with silicon

  • Lyu, Jike
  • Fina, Ignasi
  • Solanas, Raul
  • Fontcuberta, Josep
  • Sánchez Barrera, Florencio
Ferroelectric BaTiO3 films have been epitaxially grown by pulsed laser deposition on buffered Si substrates. We show that BaTiO3 films texture is selectable by appropriate choice of Si wafer orientation and buffer layers. BaTiO3 films having (00l), (l0l) or (l0l)/(l00) texture present very flat surface, low current leakage, and sizeable ferroelectric polarization. The films, integrated on silicon platforms, offer opportunities to exploit anisotropic optic and dielectric properties of ferroelectric BaTiO3., Financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and the MAT2017-85232-R (AEI/FEDER,UE), MAT2014-56063-C2-1-R, and MAT2015-73839-JIN projects, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. JL is financially supported by China Scholarship Council (CSC) with No. 201506080019. JL work has been done as a part of his Ph.D. program in Materials Science at Universitat Autònoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Control of the Polarization of Ferroelectric Capacitors by the Concurrent Action of Light and Adsorbates

  • Fanmao, Liu
  • Fina, Ignasi
  • Sauthier, Guillaume
  • Sánchez Barrera, Florencio
  • Rappe, Andrew M.
  • Fontcuberta, Josep
Ferroelectric perovskites hold promise of enhanced photovoltaic efficiency and photocatalytic activity. Consequently, the photoresponse of oxide ferroelectric thin films is an active field of research. In electrode/ferroelectric/ electrode devices, internal charge in the ferroelectric, free charge in the electrodes, and buried adsorbates at interfaces combine to screen the ferroelectric polarization and to stabilize the polar state. Under illumination, photoinduced carriers and photodissociated adsorbates may disrupt the screening equilibrium, modifying the switchable polarization and altering its expected benefits. Here, we explore the photoresponse of BaTiO3 thin films in a capacitor geometry, focusing on the effects of visible illumination on the remanent polarization. By combining ferroelectric and X-ray photoelectron spectroscopy, we discover that photoreaction of charge-screening H2O-derived adsorbates at the buried metal−ferroelectric Pt/BaTiO3 interface plays an unexpected pivotal role, enabling a substantial modulation (up to 75%) of the switchable remanent polarization by light. These findings illustrate that the synergy between photochemistry and photovoltaic activity at the surface of a ferroelectric material can be exploited to tune photoferroelectric activity, This work is supported by the Spanish government (MAT2014-56063-C2-1-R, MAT2017-85232-R (AEI/FEDER,UE), and MAT2015-73839-JIN and associated FEDER) and by the Catalan government (2017 SGR 1377). ICMABCSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496). I.F. acknowledges Juan de la Cierva Incorporació n postdoctoral fellowship (IJCI-2014-19102) from the Spanish Ministry of Economy and Competitiveness. F.L. is financially supported by China Scholarship Council (CSC) with no. 201306020016. A.M.R. acknowledges support from the Office of Naval Research under grant N00014-17-1- 2574. The ICN2 is funded by the CERCA programme/ Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa programme of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, grant no. SEV-2013-0295)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Band gap tuning of solution processed ferroelectric perovskite BiFe1-xCoxO3 thin films

  • Machado, Pamela
  • Scigaj, Mateusz
  • Gázquez, Jaume
  • Rueda, Estel
  • Sánchez Díaz, Antonio
  • Fina, Ignasi
  • Gibert Roca, Martí
  • Puig Molina, Teresa
  • Obradors, Xavier
  • Campoy Quiles, Mariano
  • Coll, Mariona
Ferroelectric perovskite oxides are emerging as a promising photoactive layer for photovoltaic applications due to their very high stability and their alternative ferroelectricity-related mechanism for solar energy conversion that could lead to extraordi-narily high efficiencies. One of the biggest challenges so far is to reduce their band gap towards the visible while simultane-ously retaining ferroelectricity. To address these two issues, herein it is performed an elemental composition engineering of BiFeO3 by substituting Fe by Co cations, as means to tune the characteristics of the transition metal-oxygen bond. We demonstrate by solution processing the formation of epitaxial, pure phase and stable BiFe1-xCoxO3 thin films for x=0.3 and film thickness up to 100 nm. Importantly, the band gap can be tuned from 2.7 eV to 2.3 eV upon cobalt substitution while simultaneously enhancing ferroelectricity. As a proof of concept, non-optimized vertical devices have been fabricated and, reassuringly, the electrical photoresponse in the visible of the Co-substituted phase is improved with respect to the unsubsti-tuted oxide., We would like to acknowledge Prof. Josep Fontcuberta for fruitful discussions and comments on this study and for providing access to his experimental facilities. This research was supported by the Spanish MINECO (“Severo Ochoa” Programme for Centres of Excellence in R&D SEV-2015-0496 and FIPNANOSOLE- 2016, MAT2017-83169-R, MAT2014-51778-C2- 1-R, MAT2015-70850-P, MAT2017-85232-R (AEI/FEDER, EU)), the Generalitat de Catalunya (2017-SGR-1519, 2017 SGR- 1377), the European Research Council-ERC (FOREMAT under grant agreement no. 648901) and “L’Oreal UNESCO For Women in Science”. M.C., J.G. and I.F. acknowledge RyC contracts (2013-12448, 2012-11709 and RYC-2017-22531). I.F. is grateful to MINECO for MAT2015-73839-JIN project. The HRTEM microscopy work was conducted at the Center for Nanophase Materials Sciences at Oak Ridge National Laboratory, which is a DOE Office of Science User Facility., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Conical magnetic structures in multiferroic SrScxFe12−xO19 hexaferrites derived from powder neutron diffraction

  • Qureshi, Navid
  • Ruiz-Martín, M. D.
  • Puente-Orench, Inés
  • Fernández-Díaz, M. T.
  • Balbashov, A. M.
  • Ivanov, V. Yu.
  • Skumryev, V.
  • Mukhin, A. A.
We present a systematic powder neutron diffraction study on Sr-based M-type hexaferrites SrScxFe12−xO19 using high-resolution and high-flux instruments. We have derived the magnetic configurations for the compounds with x=1.4, 1.6, and 1.8 at room temperature and at 2 K revealing a ferrimagnetic structure and a complex conical magnetic structure, respectively, where the latter is decomposed into the axial ferrimagnetic and the helicoidally modulated component in the hexagonal a−b plane. Our temperature- and composition-dependent investigation reveals that doping nonmagnetic Sc into this system reinforces the frustration and pushes the transition between the two ordered phases toward higher temperatures. The continuous opening of the spin cone suggests a smooth transition from an easy-axis toward an easy-plane anisotropy with decreasing temperature, which can be reinforced by increasing Sc content., This paper was supported by the Russian Scientific Foundation (Project No. 16-12-10531). Financial support from the Spanish Ministry of Economy, Competitiveness and Universities, through Projects No. MAT2014-56063-C2-1-R and No. MAT2017-85232-R (AEI/FEDER, EU), is acknowledged. We acknowledge ILL and D1B-CRG Ministerio de Economía y Competitividad (MINECO) for beam time allocation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High Carrier Mobility, Electrical Conductivity, and Optical Transmittance in Epitaxial SrVO3 Thin Films

  • Mirjolet, Mathieu
  • Sánchez Barrera, Florencio
  • Fontcuberta, Josep
The urgent need for more performant transparent conducting electrodes is stimulating intensive research on oxide thin films based on early transition metals (e.g., V, Nb, Mo, etc.), where it is expected that the partially occupied (i.e., nd1, nd2…) conduction band will give rise to metallic conductivity. Growing thin films of these oxides typically requires an extremely low oxygen pressure. However, in growth methods involving hyperthermal kinetics (such as pulsed laser deposition), this may have severe detrimental effects on the electrical and optical properties of the film. Here, it is shown that the use of a nonreactive gas during a pulsed laser deposition process allows epitaxial SrVO3 films to be obtained with low room temperature resistivity (ρ ≈ 31 μΩ cm), large carrier mobility (μ ≈ 8.3 cm2 V−1 s−1), and large residual resistivity ratio (RRR ≈ 11.5), while improving optical transparency in the visible range. It is argued that the success of this growth strategy relies on the modulation of energetics of plasma species and a concomitant reduction of defects in the films. These findings may find applications in other oxide‐based thin film technologies (i.e., ferroelectric tunnel memories, etc.) where growth‐induced point effects may compromise functionality., Financial support from the Spanish Ministry of Science, Innovation and Universities, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV‐2015‐0496) and the MAT2017‐85232‐R (AEI/FEDER, EU), MAT2014‐56063‐C2‐1‐R, and MAT2015‐73839‐JIN projects, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. M.M. was financially supported by the Spanish Ministry of Science, Innovation and Universities and this work has been done as a part of his Ph.D. program in Physics at Universitat Autònoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unraveling Ferroelectric Polarization and Ionic Contributions to Electroresistance in Epitaxial Hf0.5Zr0.5O2 Tunnel Junctions

  • Cervo Sulzbach, Milena
  • Estandía, Saúl
  • Long, Xiao
  • Lyu, Jike
  • Dix, Nico
  • Gázquez, Jaume
  • Chisholm, Matthew F.
  • Sánchez Barrera, Florencio
  • Fina, Ignasi
  • Fontcuberta, Josep
Tunnel devices based on ferroelectric Hf0.5Zr0.5O2 (HZO) barriers hold great promises for emerging data storage and computing technologies. The resistance state of the device can be changed through use of a suitable writing voltage. However, the microscopic mechanisms leading to the resistance change are an intricate interplay between ferroelectric polarization controlled barrier properties and defect‐related transport mechanisms. The fundamental role of the microstructure of HZO films determining the balance between those contributions is demonstrated. The HZO film presents coherent or incoherent grain boundaries, associated to the coexistance of monoclinic and orthorhombic phases, which are dictated by the mismatch with the substrates for epitaxial growth. These grain boundaries are the toggle that allows to obtain either large (up to ≈450%) and fully reversible genuine polarization controlled electroresistance when only the orthorhombic phase is present or an irreversible and extremely large (≈103–105%) electroresistance when both phases coexist., Financial support from the Spanish Ministry of Economy, Competitiveness and Universities, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV‐2015‐0496) and the MAT2017‐85232‐R (AEI/FEDER, EU), and MAT2015‐73839‐JIN projects, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. M.C.S. acknowledges fellowship from “la Caixa Foundation” (ID 100010434; the fellowship code is LCF/BQ/IN17/11620051). I.F. and J.G. acknowledge Ramón y Cajal contracts RYC‐2017‐22531 and RYC‐2012‐11709, respectively. S.E. acknowledges the Spanish Ministry of Economy, Competitiveness and Universities for his Ph.D. contract (SEV‐2015‐0496‐16‐3) and its cofunding by the ESF. J.L. and X.L. are financially supported by China Scholarship Council (CSC) with Nos. 201506080019 and 201806100207, respectively. M.C. aknowledges financial support from U.S. Dept. of Energy. M.C.S. work has been done as a part of her Ph.D. in physics at Universitat Autònoma de Barcelona. S.E. and J.L. work has been done as a part of their Ph.D. in materials science at Universitat Autònoma de Barcelona. The authors acknowledge the ICTS‐CNME for offering access to their instruments and expertise. The electron microscopy performed at ORNL was supported by the Materials Sciences and Engineering Division of Basic Energy Sciences of the Office of Science of the U.S. Department of Energy., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Generation and Imaging of Magnetoacoustic Waves over Millimeter Distances

  • Casals, Blai
  • Statuto, Nahuel
  • Foerster, Michael
  • Hernández Mínguez, Alberto
  • Cichelero, Rafael
  • Manshausen, Peter
  • Mandziak, Anna
  • Aballe, Lucía
  • Hernández, Joan Manel
  • Macià, Ferran
Using hybrid piezoelectric-magnetic systems we have generated large amplitude magnetization waves mediated by magnetoelasticity with up to 25 degrees variation in the magnetization orientation. We present direct imaging and quantification of both standing and propagating acoustomagnetic waves with different wavelengths, over large distances up to several millimeters in a nickel thin film., The authors acknowledge Jordi Prat of ALBA for his help during experiments. F. M. acknowledges support from the MINECO through Grant No. RYC-2014-16515. F. M., B. C., and R. C. acknowledge support from MINECO through Grants No. SEV-2015-0496 and No. MAT2017- 85232-R. F. M., J. M. H., and N. S. acknowledge funding from MINECO through Grant No. MAT2015-69144-P. We thank Werner Seidel and Sander Rauwerdink from PDI for assistance in the preparation of acoustic delay lines on LiNbO3. L. A. and M. F. acknowledge support from MINECO through RTI2018-095303-B-C53. This project was partially supported by the ALBA in-house research program through Projects No. ALBA-IH2015PEEM and ALBAIH2017PEEM., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In operando adjustable orbital polarization in LaNiO3 thin films

  • Vasili, Hari Babu
  • Pesquera, David
  • Valvidares, Manuel
  • Gargiani, Pierluigi
  • Pellegrin, Eric
  • Bondino, Federica
  • Magnano, Elena
  • Barla, Alessandro
  • Fontcuberta, Josep
The different occupancy of electronic orbitals, the so-called orbital polarization, is a key parameter determining electric and magnetic properties of materials. Here we report on the demonstration of in operando voltage-controlled tuning of the orbital occupation in LaNiO3 epitaxial thin films grown on piezoelectric substrates. The different static contributions to the orbital occupation are disentangled, namely the epitaxial strain and the surface symmetry breaking, and the superimposed electric-field controlled orbital polarization are determined by x-ray linear dichroism at the Ni L2,3 edges. The voltage-controlled orbital polarization allows changing the orbital polarization by about an additional 50%., Financial support from the Spanish Ministry of Science, Innovation and Universities, through the “Severo Ochoa” Program for Centers of Excellence in R&D (Grant No. SEV2015-0496) and Grant No. MAT2017-85232-R (AEI/FEDER, EU), and from Generalitat de Catalunya (Grant No. 2017 SGR 1377) is acknowledged. We thank Dr. Zhiwei Hu, Max-Planck-Institute for Chemical Physics of Solids, Germany for helpful discussions. The support and advice from Dr. F. Sánchez on the film growth and Dr. Ignasi Fina for ferroelectric characterization are very much appreciated., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fatigue and retention in the growth window of ferroelectric Hf0.5Zr0.5O2 thin films

  • Lyu, Jike
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
The growth window of epitaxial Hf0.5Zr0.5O2 is established taking into account the main ferroelectric properties that films have to present simultaneously: high remanent polarization, low fatigue, and long retention. Defects in the film and imprint field depend on deposition temperature and oxygen pressure, with an impact on fatigue and retention, respectively. Fatigue increases with substrate temperature and pressure, and retention is short if low temperature is used. The growth window of epitaxial stabilization of ferroelectric Hf0.5Zr0.5O2 is narrower when all major ferroelectric properties (remanence, endurance, and retention) are considered, but deposition temperature and pressure ranges are still sufficiently wide., Financial support from the Spanish Ministerio de Ciencia e Innovacion, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and the MAT2017-85232-R (AEI/FEDER, EU), PID2019-107727RB-I00 (AEI/FEDER, EU), and MAT2015-73839-JIN projects and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. I.F. acknowledges Ramon y Cajal Contract No. RYC-2017-22531. J.L. was financially supported by the China Scholarship Council (CSC) with No. 201506080019., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Local manipulation of metamagnetism by strain nanopatterning

  • Foerster, Michael
  • Menéndez, Enric
  • Coy, Emerson
  • Quintana, Alberto
  • Gómez Olivella, Carles
  • Esqué de los Ojos, Daniel
  • Vallcorba, Oriol
  • Frontera, Carlos
  • Aballe, Lucía
  • Nogués, Josep
  • Sort, Jordi
  • Fina, Ignasi
Among metamagnetic materials, FeRh alloys are technologically appealing due to their uncommon antiferromagnetic-to-ferromagnetic metamagnetic transition which occurs at a temperature T* just above room temperature. Here, a controlled increase of T* (DT* B 20 8C) is induced in pre-selected regions of FeRh films via mechanical strain nanopatterning. Compressive stresses generated at the vicinity of predefined nanoindentation imprints cause a local reduction of the FeRh crystallographic unit cell parameter, which leads to an increase of T* in these confined micro-/nanometric areas. This enhances the stability of the antiferromagnetic phase in these localized regions. Remarkably, generation of periodic arrays of nanopatterned features also allows modifying the overall magnetic and electric transport properties across large areas of the FeRh films. This approach is highly appealing for the design of new memory architectures or other AFM-spintronic devices., Dr Patxi Lopez-Barbera is acknowledged for his assistance with the MOKE experiments. Vicente Garcia-Juez from Real Casa de la Moneda – Fabrica Nacional de Moneda y Timbre is acknowledged for his scientific advice. Dr Florencio Sa´nchez is acknowledged for the growth of the samples. Dr Bernat Bozzo is acknowledged for the electric transport characterization. ALBA synchrotron is acknowledged for the provision of beamtime at the MSPD (proposal number 2017092412) and CIRCE (proposal numbers 2017092462 and 2018022818) beamlines. Financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘‘Severo Ochoa’’ Programme for Centres of Excellence in R&D (SEV-2015-0496 and SEV-2017-0706) and the MAT2017-85232-R, RTI2018-095303-B-C53. MAT2014-56063-C2-1-R, MAT2017-86357-C3-1-R (and associated FEDER) and MAT2015-73839-JIN projects, the Generalitat de Catalunya (2014 SGR 734 and 2017 SGR 292), AGAUR (2018 LLAV 00032 and 2019 LLAV 00050) and the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 665919 is acknowledged. This work was supported by the European Research Council under the SPIN-PORICS 2014-Consolidator Grant, Agreement No. 648454 and the MAGICSWITCH 2019-Proof of Concept Grant, Agreement No. 875018. ICN2 is funded by the CERCA Programme/Generalitat de Catalunya. I. F. acknowledges his RyC contract RYC-2017-22531. E. C. acknowledges the partial financial support from the National Science Centre of Poland (NCN) by the PRELUDIUM project UMO-2015/17/N/ST5/01988 and the SONATA Project No. UMO-2016/23/D/ST3/02121., We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Epitaxial Ferroelectric La-doped Hf0.5Zr0.5O2 Thin Films

  • Song, Tingfeng
  • Bachelet, Romain
  • Saint-Girons, Guillaume
  • Solanas, Raul
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
Doping ferroelectric Hf0.5Zr0.5O2 with La is a promising route to improve endurance. However, the beneficial effect of La on the endurance of polycrystalline films may be accompanied by degradation of the retention. We have investigated the endurance - retention dilemma in La-doped epitaxial films. Compared to undoped epitaxial films, large values of polarization are obtained in a wider thickness range, whereas the coercive fields are similar, and the leakage current is substantially reduced. Compared to polycrystalline La-doped films, epitaxial La-doped films show more fatigue but there is not significant wake-up effect and endurance-retention dilemma. The persistent wake-up effect common to polycrystalline La-doped Hf0.5Zr0.5O2 films, is limited to a few cycles in epitaxial films. Despite fatigue, endurance in epitaxial La-doped films is more than 1010 cycles, and this good property is accompanied by excellent retention of more than 10 years. These results demonstrate that wake-up effect and endurance-retention dilemma are not intrinsic in La-doped Hf0.5Zr0.5O2., Financial support from the Spanish Ministerio de Ciencia e Innovación, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and the MAT2017-85232-R (AEI/FEDER, EU), PID2019-107727RB-I00 (AEI/FEDER, EU), and MAT2015-73839-JIN projects, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. IF acknowledges Ramón y Cajal contract RYC-2017-22531. TS is financially supported by China Scholarship Council (CSC) with No. 201807000104. TS work has been done as a part of his Ph.D. program in Materials Science at Universitat Autònoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photoinduced Persistent Electron Accumulation and Depletion in LaAlO3=SrTiO3 Quantum Wells

  • Chen, Yu
  • Lechaux, Yoann
  • Casals, Blai
  • Guillet, Bruno
  • Minj, Albert
  • Gázquez, Jaume
  • Méchin, Laurence
  • Herranz, Gervasi
Persistent photoconductance is a phenomenon found in many semiconductors, by which light induces long-lived excitations in electronic states. Commonly, persistent photoexcitation leads to an increase of carriers (accumulation), though occasionally it can be negative (depletion). Here, we present the quantum well at the LaAlO 3 / SrTiO 3 interface, where in addition to photoinduced accumulation, a secondary photoexcitation enables carrier depletion. The balance between both processes is wavelength dependent, and allows tunable accumulation or depletion in an asymmetric manner, depending on the relative arrival time of photons of different frequencies. We use Green’s function formalism to describe this unconventional photoexcitation, which paves the way to an optical implementation of neurobiologically inspired spike-timing-dependent plasticity., This work was supported by the Spanish Ministerio de Ciencia, Innovación y Universidades through Grants No. MAT2017-85232-R (AEI/FEDER,EU) and Severo Ochoa SEV-2015-0496 and the Generalitat de Catalunya through Grant No. 2017 301 SGR1377. Y. L., B. G., and L. M. acknowledge the Normandy region and European Regional Development Fund through the projects RIN RECHERCHE PLACENANO Contract No. 18E01664/ 18P02478 and RIN RECHERCHE EVOL_PELIICAEN Contract No. 17P04260/17P04263. Y. C. acknowledges the China Scholarship Council Grant No. 201506890029. J. G. acknowledges Ramón y Cajal (RyC) contract (2012-11709). The STEM microscopy work was conducted in the ICTSCNME. STEM-specimen preparation was conducted in “Laboratorio de Microscopias Avanzadas” at the Instituto de Nanociencia de Aragon-Universidad de Zaragoza. The authors acknowledge both the ICTS-CNME and the LMAINA for offering access to their instruments and expertise. We acknowledge collaboration and discussions with Dr. Florencio Sánchez regarding thin film growth., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Critical Effect of Bottom Electrode on Ferroelectricity of Epitaxial Hf0.5Zr0.5O2 Thin Films

  • Estandía, Saúl
  • Gázquez, Jaume
  • Varela, María
  • Dix, Nico
  • Qian, Mengdi
  • Solanas, Raul
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
Epitaxial orthorhombic Hf0.5Zr0.5O2 (HZO) films on La0.67Sr0.33MnO3 (LSMO) electrodes show robust ferroelectricity, with high polarization, endurance and retention. However, no similar results have been achieved using other perovskite electrodes so far. Here, LSMO and other perovskite electrodes are compared. A small amount of orthorhombic phase and low polarization is found in HZO films grown on La-doped BaSnO3 and Nb-doped SrTiO3, while null amounts of orthorhombic phase and polarization are detected in films on LaNiO3 and SrRuO3. The critical effect of the electrode on the stabilized phases is not consequence of differences in the electrode lattice parameter. The interface is critical, and engineering the HZO bottom interface on just a few monolayers of LSMO permits the stabilization of the orthorhombic phase. Furthermore, while the specific divalent ion (Sr or Ca) in the manganite is not relevant, reducing the La content causes a severe reduction of the amount of orthorhombic phase and the ferroelectric polarization in the HZO film., Financial support from the Spanish Ministry of Science and Innovation, through the Severo Ochoa FUNFUTURE (CEX2019- 000917-S) and the MAT2017-85232-R (AEI/FEDER, EU), and PID2019- 107727RB-I00 (AEI/FEDER, EU) projects, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. IF and JG acknowledge Ramón y Cajal contracts RYC-2017-22531 and RYC-2012-11709, respectively. IF acknowledges Beca Leonardo from Fundación BBVA. SE acknowledges the Spanish Ministry of Economy, Competitiveness and Universities for his PhD contract (SEV-2015-0496-16-3) and its cofunding by the ESF. SE work has been done as a part of his Ph.D. program in Materials Science at Universitat Autònoma de Barcelona. Electron microscopy observations carried out at the Centro Nacional de Microscopía Electrónica at UCM (MV) supported by MICINN grant# RTI2018-097895-B-C43., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Flexible Antiferromagnetic FeRh Tapes as Memory Elements

  • Fina, Ignasi
  • Dix, Nico
  • Menéndez, Enric
  • Crespi, Anna
  • Foerster, Michael
  • Aballe, Lucía
  • Sánchez Barrera, Florencio
  • Fontcuberta, Josep
The antiferromagnetic to ferromagnetic transition occurring above room temperature in FeRh is attracting interest for applications in spintronics, with perspectives for robust and untraceable data storage. Here, we show that FeRh films can be grown on a flexible metallic substrate (tape shaped), coated with a textured rock-salt MgO layer, suitable for large-scale applications. The FeRh tape displays a sharp antiferromagnetic to ferromagnetic transition at about 90 °C. Its magnetic properties are preserved by bending (radii of 300 mm), and their anisotropic magnetoresistance (up to 0.05%) is used to illustrate data writing/reading capability., Financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and the RTI2018-095303-B-C53, MAT2017-85232-R, and MAT2015-73839-JIN projects, the Generalitat de Catalunya (2017 SGR 1377) and the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no 665919 is acknowledged. I.F. acknowledges RyC contract RYC-2017-22531. M. Vilardell is acknowledged for advice in XRD characterization. Patxi López-Barberá is acknowledged for assistance in MOKE experiments. J. Oró for technical assistance in SEM characterization. We thank J. Nogués for the use of the MOKE equipment. V. García-Juez from Real Casa de la Moneda—Fábrica Nacional de Moneda y Timbre is acknowledged for scientific advice. Theva Dünnschichttechnik GmbH is acknowledged for providing the flexible substrates., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Blocking of Conducting Channels Widens Window for Ferroelectric Resistive Switching in Interface‐Engineered Hf0.5Zr0.5O2 Tunnel Devices

  • Sulzbach, Milena Cervo
  • Estandía, Saúl
  • Gázquez, Jaume
  • Sánchez Barrera, Florencio
  • Fina, Ignasi
  • Fontcuberta, Josep
Films of Hf0.5Z0.5O2 (HZO) contain a network of grain boundaries. In (111) HZO epitaxial films on (001) SrTiO3, for instance, twinned orthorhombic (o‐HZO) ferroelectric crystallites coexist with grain boundaries between o‐HZO and a residual paraelectric monoclinic (m‐HZO) phase. These grain boundaries contribute to the resistive switching response in addition to the genuine ferroelectric polarization switching and have detrimental effects on device performance. Here, it is shown that, by using suitable nanometric capping layer deposited on HZO film, a radical improvement of the operation window of the tunnel device can be achieved. Crystalline SrTiO3 and amorphous AlOx are explored as capping layers. It is observed that these layers conformally coat the HZO surface and allow to increase the yield and homogeneity of ferroelectric junctions while strengthening endurance. Data show that the capping layers block ionic‐like transport channels across grain boundaries. It is suggested that they act as oxygen suppliers to the oxygen‐getters grain boundaries in HZO. In this scenario it could be envisaged that these and other oxides could also be explored and tested for fully compatible CMOS technologies., Financial support from the Spanish Ministry of Economy, Competitiveness and Universities, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV‐2015‐0496) and the MAT2017‐85232‐R (AEI/FEDER, EU), and MAT2015‐73839‐JIN projects, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. M.C.S. acknowledges fellowship from “la Caixa Foundation” (ID 100010434; LCF/BQ/IN17/11620051). I.F. and J.G. acknowledge Ramón y Cajal contracts RYC‐2017‐22531 and RYC‐2012‐11709, respectively. S.E. acknowledges the Spanish Ministry of Economy, Competitiveness and Universities for his Ph.D. contract (SEV‐2015‐0496‐16‐3). M.C. work has been done as a part of her Ph.D. program in Physics at Universitat Autònoma de Barcelona. S.E. work has been done as a part of his Ph.D. program in Materials Science at Universitat Autònoma de Barcelona. Authors acknowledge the SEM‐FIB microscopy service of the Universidad de Málaga and the ICTS‐CNME for offering access to their instruments and expertise. Huan Tan is aknowledged for performing the AFM characterization., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural, magnetic and electronic properties of EuTi0.5W0.5O3-xNx perovskite oxynitrides

  • Oró, Judith
  • Frontera, Carlos
  • Black, Ashley P.
  • Castets, Augustin
  • Velásquez Méndez, Karen L.
  • Fontcuberta, Josep
  • Fuertes, Amparo
EuTi0.5W0.5O3-xNx oxynitrides with nitrogen contents between 0.87 and 1.63 have been synthesized by ammonolysis of EuTi0.5W0.5O4 scheelite at high temperature. They are B-site disordered perovskites that show two different crystal symmetries as a function of the nitrogen content, changing at x near 1.3 from cubic Pm-3m to orthorhombic Pbnm. The nitriding degree is tuned by the ammonia flow rate and synthesis temperature, and determines the oxidation states of the cations and the equilibrium Eu2+ ​+ ​W6+ ↔ Eu3++W5+ promoting the decrease of the tolerance factor and the structural transition for large x values and electronic reconstructions. Accompanying the symmetry lowering, the nature of the magnetic order of Eu2+ moments changes from ferromagnetic to antiferromagnetic as a result of a complex interplay of antiferromagnetic/ferromagnetic superexchange interactions balanced by structural effects and the carrier-mediated magnetic exchange between Eu2+ ions., This work was supported by the Spanish Ministerio de Ciencia, Universidades e Investigación, Spain (Projects MAT2017-86616-R and MAT2017-85232-R and from Generalitat de Catalunya (2017SGR1377, 2017SGR581). ICMAB acknowledges financial support from MINECO through the Severo Ochoa Program (SEV-2015-0496). We thank Alba synchrotron (Experiment number AV-2017092391) for the provision of beam time; we also thank Dr. François Fauth for assistance during data collection and Dr. Bernat Bozzo (ICMAB-CSIC) for performing the magnetic measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Non-linear temperature dependent phononic response of epitaxial lanthanum nickelate thin film

  • Sunidhi
  • Sharma, Vishal
  • Arora, Sunil K.
  • Sánchez Barrera, Florencio
  • Sathe, Vasant
From the temperature dependent Raman spectroscopy study (80 K–300 K) on epitaxial thin film of lanthanum nickelate (LNO), we find that the characteristics Raman active phonon modes (A1g and Eg) of LNO soften with an increase in the temperature. The extent of softening is greater for the A1g mode owing to substrate induced strain. In addition, temperature dependent Raman shifts presented with some non-linearities. Our analysis suggests that these non linearities arise due to an anharmonic contribution to the Raman shifts. We find that for A1g mode, four-phonon anharmonic process contributed most to the temperature dependent Raman shifts, while the contributions from three-phonon, strain and thermal expansion effect found to be relatively small. However, for Eg mode, the shift originated mainly from the thermal expansion effect., This project has received funding from EU-H2020 research and innovation programme under grant agreement No. 654360 within NFFA- Europe transnational access activity. We also thank UGC-DAE Consortium for Scientific Research, Indore for providing Temperature dependent Raman measurements facility. Ms. Sunidhi expresses her thanks to UGC, New Delhi for providing fellowship for research work. Florencio Sánchez acknowledges financial support from the Spanish Ministry of Science and Innovation, through the MAT2017-85232-R (AEI / FEDER, EU) and SEV-2015-0496 projects, and from Generalitat de Catalunya (2017 SGR 1377)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermal evolution of ferroelectric behavior in epitaxial Hf0.5Zr0.5O2

  • Adkins, J. W.
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
  • Bakaul, Saidur R.
  • Abiade, J. T.
Herein, we report a cryogenic-temperature study on the evolution of the ferroelectric properties of epitaxial Hf0.5Zr0.5O2 thin films on silicon. Wake-up, endurance, and fatigue of these films are found to be intricately correlated, strongly hysteretic, and dependent on available thermal energy. Field-dependent measurements reveal a decrease in polarization with temperature, which has been determined not to be an intrinsic change of the material property, rather a demonstration of the increase in the coercive bias of the material. Our findings suggest that a deficiency in thermal energy suppresses the mobility of defects presumed to be oxygen vacancies during wake-up and trapped injected charge during fatigue, which is responsible for polarization evolution during cycling. This permits accelerated wake-up and fatigue effects at high temperatures where thermal energy is abundant but delays these effects at cryogenic temperatures., The work at Argonne (J. W. Adkins and S. R. Bakaul were responsible for electronic transport experiments, data analysis, and contribution to manuscript writing) was supported by the U.S. Department of Energy, Office of Science, Basic Energy Sciences, Materials Sciences and Engineering Division. The use of the Center for Nanoscale Materials was supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, under Contract No. DE-AC02-06CH11357. J. T. Abiade acknowledges financial support from the U. S. National Science Foundation under Grant No. NSFDMR-1508220. Financial support from the Spanish Ministerio de Ciencia e Innovacion, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (No. SEV-2015-0496) and the Nos. MAT2017-85232-R (AEI/FEDER, EU), and MAT2015-73839-JIN projects, and from Generalitat de Catalunya (No. 2017 SGR 1377) is acknowledged. J. W. Adkins acknowledges the University of Illinois at Chicago’s Pipeline to an Inclusive Faculty (PIF) Program. I. Fina acknowledges Ramon y Cajal Contract No. RYC-2017-22531., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optical second harmonic generation from LaAlO3/SrTiO3 interfaces with different in-plane anisotropies

  • Rubano, Andrea
  • Scigaj, Mateusz
  • Sánchez Barrera, Florencio
  • Herranz, Gervasi
  • Paparo, Domenico
Oxide growth with semiconductor-like accuracy allows the fabrication of atomically precise thin films and interfaces displaying a wide range of phases and functionalities that are absent in the corresponding oxide bulk materials. Among the other properties it was found that a two-dimensional electronic gas is formed under some circumstances at the LaAlO3/ SrTiO3(0 0 1) interface separating two typical insulating perovskite crystals. The origin of this conducting state has been discussed at length, since different doping mechanisms can act in these material systems. Many experimental results point to the so-called polar catastrophe scenario as the principal mechanism driving the formation of the two-dimensional electronic gas. According to this mechanism, the existence of an interfacial polar discontinuity is the key ingredient to drive an electronic reconstruction at the LaAlO3/SrTiO3(0 0 1) interface and the consequent formation of a two-dimensional electron gas. This simple picture has been often questioned by the existence of material systems whose interface are predicted being non-polar according to the simplistic ‘ionic’ limit but that display an electrical behavior analogous to that of LaAlO3/SrTiO3(0 0 1) interfaces. This is the case of the LaAlO3/SrTiO3(1 1 0), i. e., a LaAlO3/SrTiO3 interface with a different in-plane orientation. It is evident that to solve such kind of controversies a detailed investigation of the polar or non-polar state of these interfaces is needed, although this is not simple for the lack of experimental tools that are specifically sensitive to interfacial polarity. Here we apply Optical Second Harmonic Generation to investigate LaAlO3/SrTiO3 interfaces with different in-plane orientations to bridge this gap. By comparing our results with recent theoretical findings, we will arrive to the conclusion that the real LaAlO3/SrTiO3(1 1 0) interface is strongly polar., This work was supported by ‘Ministero Istruzione Università e Ricerca’ and ‘Consiglio Nazionale delle Ricerche’. It was also supported by ‘Spanish Ministerio de Ciència, Innovaciòn y Universidades’ through Grants No. MAT2017-85232-R (AEI/ FEDER, EU), No. MAT2014-56063-298 C2-1-R, and Severo Ochoa SEV-2015-0496, and the ‘Generalitat de Catalunya’ through Grant No. 2017 301 SGR1377., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic droplet solitons

  • Macià, Ferran
  • Kent, Andrew D.
Magnetic droplet solitons are dynamical magnetic textures that form due to an attractive interaction between spin waves in thin films with perpendicular magnetic anisotropy. Spin currents and the spin torques associated with these currents enable their formation as they provide a means to excite non-equilibrium spin-wave populations and compensate their decay. Recent years have seen rapid advances in experiments that realize and study magnetic droplets. Important advances include the first direct x-ray images of droplets, determination of their threshold and sustaining currents, measurement of their generation and annihilation time, and evidence for drift instabilities, which can limit their lifetime. This perspective discusses these studies and contrasts these solitons to other types of spin-current excitations, such as spin-wave bullets, and static magnetic textures, including magnetic vortices and skyrmions. Magnetic droplet solitons can also serve as current controlled microwave frequency oscillators with potential applications in neuromorphic chips as nonlinear oscillators with memory., We thank our many collaborators over the years that have contributed to the experiments and ideas that have been discussed in this review: J. Albert, S. Bonetti, R. Kukreja, J. Hang, C. Hahn, J. M. Hernàndez, S. Lendínez, H. Ohldag, and N. Statuto. We thank Dan Stein for discussions and comments on this manuscript. Research at NYU related to neuromorphic computing was supported by Quantum Materials for Energy Efficient Neuromorphic Computing (Q-MEEN-C), an Energy Frontier Research Center funded by the U.S. Department of Energy (DOE), Office of Science, Basic Energy Sciences (BES), under No. Award DE-SC0019273. We also acknowledge fruitful discussions with Julie Grollier, Danijela Markovic, and Mark Stiles, which were initiated by Q-MEEN-C. F.M. acknowledges support from the Spanish Government through Grant Nos. RYC-2014-16515, MAT2015-69144-P, SEV-2015-0496, and MAT2017-85232-R. A.D.K. received support to conduct the x-ray microscopy and droplet lifetime experiments from the National Science Foundation under Grant No. DMR-1610416., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering Polar Oxynitrides: Hexagonal Perovskite BaWON2

  • Oró, Judith
  • Fina, Ignasi
  • Frontera, Carlos
  • Gázquez, Jaume
  • Ritter, Clemens
  • Cunquero, Marina
  • Loza Alvarez, Pablo
  • Conejeros, Sergio
  • Alemany, Pere
  • Canadell, Enric
  • Fontcuberta, Josep
  • Fuertes, Amparo
Non‐centrosymmetric polar compounds have important technological properties. Reported perovskite oxynitrides show centrosymmetric structures, and for some of them high permittivities have been observed and ascribed to local dipoles induced by partial order of nitride and oxide. Reported here is the first hexagonal perovskite oxynitride BaWON2, which shows a polar 6H polytype. Synchrotron X‐ray and neutron powder diffraction, and annular bright‐field in scanning transmission electron microscopy indicate that it crystalizes in the non‐centrosymmetric space group P63mc, with a total order of nitride and oxide at two distinct coordination environments in cubic and hexagonal packed BaX3 layers. A synergetic second‐order Jahn–Teller effect, supported by first principle calculations, anion order, and electrostatic repulsions between W6+ cations, induce large distortions at two inequivalent face‐sharing octahedra that lead to long‐range ordered dipoles and spontaneous polarization along the c axis. The new oxynitride is a semiconductor with a band gap of 1.1 eV and a large permittivity., This work was supported by the Ministerio de Ciencia e Innovación, Spain (MAT2017‐86616‐R, MAT2017‐85232‐R, SEV‐2015‐0496, MDM‐2017‐0767, PGC2018‐096955‐B‐C44 and PGC2018‐093863‐B‐C22) and the Generalitat de Catalunya (2017SGR1377, 2017SGR581, 2017SGR1506 and 2017SGR1289). We thank Alba and ILL (experiments 2018082958 and 5‐23‐721, https://doi.org/10.5291/ILL‐DATA.5‐23‐721) for beam time provision, and Dr. François Fauth for assistance in data collection at Alba. I.F and J.G. acknowledge the Ramon y Cajal contracts RYC‐2017‐22531 and RYC‐2012‐11709. S.C. was supported by FONDECYT, Chile (project 11171063). ICTS‐CNME at UCM is acknowledged for offering access to STEM and expertise., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electric-field-induced avalanches and glassiness of mobile ferroelastic twin domains in cryogenic SrTiO3

  • Casals, Blai
  • Dijken, Sebastiaan van
  • Herranz, Gervasi
  • Salje, Ekhard K. H.
Domain motion during ferroelectric switching has been recently suggested to follow scale-invariant avalanche dynamics. An interesting question concerns the dynamics of ferroelastic materials where the bulk material is nonpolar, while the polarity arises at domain walls only. We tackle this issue by investigating the dynamics of ferroelastic twins in SrTi O 3 where the movement of domains is driven mainly by the anisotropic dielectric response at low temperatures. We find that the dynamics of the twin reconfiguration under electric field proceeds by jerks, where the energy distribution is power-law distributed, indicating avalanche dynamics. Avalanche exponents are sensitive to the complexity of the twin pattern structure, reflecting glassiness when twins are interwoven and forming junctions at the intersections between domain walls. This “glassy” behavior is attributed to the pinning originated by these self-generated defects during jamming between twins., We acknowledge financial support from EPSRC (Grant No. EP/P024904/1) and support from the Spanish Ministerio de Ciencia, Innovación y Universidades through Grant No. MAT2017-85232-R (AEI/FEDER, EU), Severo Ochoa SEV-2015-0496, the Generalitat de Catalunya through Grant No. 2017 301 SGR1377, and the Academy of Finland (Grant No. 316857)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Epitaxial Ferroelectric HfO2 Films: Growth, Properties, and Devices

  • Fina, Ignasi
  • Sánchez Barrera, Florencio
About ten years after ferroelectricity was first reported in doped HfO2 polycrystalline films, there is tremendous interest in this material and ferroelectric oxides are once again in the spotlight of the memories industry. Great efforts are being made to understand and control ferroelectric properties. Epitaxial films, which have fewer defects and a more controlled microstructure than polycrystalline films, can be very useful for this purpose. Epitaxial films of ferroelectric HfO2 have been much less investigated, but after the first report in 2015 significant progress has been achieved. This review summarizes and discusses the main advances on epitaxial HfO2, considering growth, study of structural and ferroelectric properties, identification of the ferroelectric phase, and fabrication of devices. We hope this review will help to researchers investigating epitaxial HfO2. It can also help extend the interest of the ferroelectric HfO2 community, now basically focused on polycrystalline samples, to epitaxial films., Financial support from the Spanish Ministry of Science and Innovation, through the Severo Ochoa FUNFUTURE (CEX2019-000917-S), MAT2017-85232-R (AEI/FEDER, EU), PID2020-112548RB-I00 (AEI/FEDER, EU), and PID2019-107727RB-I00 (AEI/FEDER, EU) projects, from CSIC through the i-LINK (LINKA20338) program, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. Project support was also provided by a 2020 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation. I.F. acknowledges Ramón y Cajal Contract RYC-2017-22531., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Non-volatile optical switch of resistance in photoferroelectric tunnel junctions

  • Long, Xiao
  • Tan, Huan
  • Sánchez Barrera, Florencio
  • Fina, Ignasi
  • Fontcuberta, Josep
In the quest for energy efficient and fast memory elements, optically controlled ferroelectric memories are promising candidates. Here, we show that, by taking advantage of the imprint electric field existing in the nanometric BaTiO3 films and their photovoltaic response at visible light, the polarization of suitably written domains can be reversed under illumination. We exploit this effect to trigger and measure the associate change of resistance in tunnel devices. We show that engineering the device structure by inserting an auxiliary dielectric layer, the electroresistance increases by a factor near 2 × 103%, and a robust electric and optic cycling of the device can be obtained mimicking the operation of a memory device under dual control of light and electric fields., Financial support from the Spanish Ministry of Science, Innovation and Universities, through the “Severo Ochoa” Program for Centres of Excellence in R&D (FUNFUTURE, CEX2019-000917-S) and the MAT2017-85232-R (AEI/FEDER, EU), MAT2015-73839-JIN (MINECO/FEDER, EU), PID2019-107727RB-I00 (MINECO/FEDER, EU) projects, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. I.F. acknowledges RyC Contract RYC-2017-22531 and Beca Leonardo from Fundación BBVA. X.L and H.T are financially supported by China Scholarship Council (CSC), respectively with nos. 201806100207 and 201906050014. The work of X.L. and H.T. have been done as a part of their Ph.D. program in Materials Science at Universitat Autònoma de Barcelona. We are extremely thankful to R. Solanas for his skillful operation of the PLD system. R. Silvestre-Anglada is acknowledged for assistance in I(V) characteristics fittings., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly transparent and conductive ITO substrates for near infrared applications

  • Maniyara, Rinu Abraham
  • Graham, Christina
  • Paulillo, Bruno
  • Bi, Yu
  • Chen, Yu
  • Herranz, Gervasi
  • Baker, David E.
  • Mazumder, Prantik
  • Konstantatos, Gerasimos
  • Pruneri, Valerio
Indium tin oxide (ITO) is the most widely used transparent conductor in applications such as light emitting diodes, liquid crystal devices, touch screens, and photovoltaic cells. So far, its use has mainly been limited to the visible range (380 nm–750 nm), as it reflects at longer wavelengths and, consequently, its transmission is low. Here, we introduce a simple technique, based on high temperature annealing, which can reduce reflection in the near-infrared range (750 nm–2400 nm). With an optimized set of parameters, we were able to modulate the ITO properties and achieve a high transmission, greater than 80% including substrate contribution, at telecommunication wavelengths (C-band, 1530 nm–1565 nm) while still maintaining high electrical conductivity (resistivity <1.9 × 10−4 Ω cm). By using the newly developed infrared ITO transparent conductor, we demonstrate quantum dot solar cells with 27.7% enhancement in external quantum efficiency at the first exciton peak (1650 nm), and liquid crystal switching devices with 25% enhancement in transmission, with respect to device counterparts incorporating commercially available ITO., We acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through Grant No. MAT2017-85232-R (AEI/FEDER, EU) and the Spanish State Research Agency through the “Severo Ochoa” program for Centers of Excellence in R&D (CEX2019-000910-S and CEX2019-000917 S), and project TUNA-SURF (Grant No. PID2019-106892RB-I00), from Fundació Cellex, Fundació Mir-Puig and from Generalitat de Catalunya through the CERCA program through AGAUR Grant Nos. 2017 SGR 1634 and 2017 301 SGR1377. C.G. acknowledges the funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 713729. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 754510. Y.C. acknowledges the China Scholarship Council (Grant No. 201506890029). The authors also acknowledge Vittoria Finazzi for her help and fruitful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thickness effect on ferroelectric properties of La-doped HfO2 epitaxial films down to 4.5 nm

  • Song, Tingfeng
  • Bachelet, Romain
  • Saint-Girons, Guillaume
  • Dix, Nico
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
Stabilization of the orthorhombic phase of HfO2 with La allows very high polarization and endurance. However, these properties have not been confirmed yet in films having thickness of less than 10 nm. We have grown (111)-oriented La (2 at%) doped epitaxial HfO2 films on SrTiO3(001) and Si(001) substrates, and we report on the thickness dependence of their ferroelectric properties. Films of less than 7 nm have a high remanent polarization of about 30 µC cm-2 , show slight wakeup, endurance of at least 1010 cycles and retention of more than 10 years, both latest properties measured at the same poling voltage. La-doped HfO2 films even as thin as 4.5 nm also show robust ferroelectric properties., Financial support from the Spanish Ministry of Science and Innovation, through the Severo Ochoa FUNFUTURE (CEX2019- 000917-S), MAT2017-85232-R (AEI/FEDER, EU), PID2020- 112548RB-I00 (AEI/FEDER, EU), and PID2019-107727RB-I00 (AEI/FEDER, EU) projects, from CSIC through the i-LINK (LINKA20338) program, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. Project supported by a 2020 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation. IF acknowledges Ramón y Cajal contract RYC-2017- 22531. TS is financially supported by China Scholarship Council (CSC), grant No. 201807000104. TS work has been done as a part of his Ph.D. program in Materials Science at Universitat Autònoma de Barcelona. RB and GSG acknowledge the financial support from the European Commission through the project TIPS (No. H2020-ICT-02-2014-1-644453), from the French national research agency (ANR) through the projects DIAMWAFEL (No. ANR-15-CE08-0034), and MITO (No. ANR-17- CE05-0018), and from CNRS through the MITI interdisciplinary programs (project NOTE). They are also grateful to the joint laboratory INL-RIBER, P. Regreny, C. Botella and J. B. Goure for the MBE technical support on the Nanolyon technological platform., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Switchable photovoltaic response in hexagonal LuMnO3 single crystals

  • Sheng, Yunwei
  • Fina, Ignasi
  • Gospodinov, Marin
  • Fontcuberta, Josep
Hexagonal manganites, such as h-LuMnO3, are ferroelectric with its polar axis along the hexagonal axis and have a narrow electronic bandgap (≈ 1.5 eV). Using Pt electrodes, h LuMnO3 single crystals display a strong rectification, characteristic of a Schottky diode, and a large photoresponse. It is found that the short circuit photocurrent Jsc along the polar axis is modulated (up to 25 %) by the direction of the ferroelectric polarization P, leading to a short circuit photocurrent loop that mimics the ferroelectric polarization, and by polarization back switching. However, a non-switchable Jsc persists. Diffusion photocurrent is shown to dominate current-in-plane measurements and contributes to the non-switchable Jsc. This observation illustrates the dramatic role of the large optical absorption in hexagonal manganites. The accompanying optical dichroism shall challenge disentangling a genuine bulk photovoltaic response in h-LuMnO3 single crystal contributing to the non-switchable Jsc. Epitaxial thin films may offer a suitable alternative., Financial support from the Spanish Ministry of Science, Innovation and Universities, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (FUNFUTURE CEX2019-000917-S), MAT2017-85232-R (AEI/FEDER, EU), and PID2019-107727RB-I00 (MINECO/FEDER, EU) projects and from Generalitat de Catalunya (No. 2017 SGR 1377) is acknowledged. I.F. acknowledges RyC Contract No. RYC-2017-22531. Project supported by a 2020 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation. Y.S is financially supported by China Scholarship Council (CSC) with No. 201806410010. The work of Y.S. has been done as a part of her Ph.D. program in Materials Science at Universitat Autònoma de Barcelona. A. Schankler and A. M. Rappe are acknowledged for the critical reading of the manuscript., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optical Plasmon Excitation in Transparent Conducting SrNbO3 and SrVO3 Thin Films

  • Mirjolet, Mathieu
  • Kataja, Mikko
  • Hakala, Tommi K.
  • Komissinskiy, Philipp
  • Alff, Lambert
  • Herranz, Gervasi
  • Fontcuberta, Josep
Transparent and metallic oxides based on 3d and 4d metals are promising materials for plasmonics. Here, the growth window to obtain epitaxial SrNbO3 (4d1) thin films is determined and the role of substrates to achieve optimal electrical conductivity and the largest residual resistivity ratio is disclosed. Optical measurements on optimized films indicate a large transparency at the visible with a sharp edge at about 1.9 eV, which coincides with the zero-crossing of the permittivity, allowing to identify the plasma frequency ωp. Similar features are observed in SrVO3 (3d1) films. Optical losses display well pronounced maxima at the corresponding ωp. Polarization-dependent optical transmittance measurements and ellipsometric data show a dip at ωp, occurring for p- but not s-polarized light, which is a fingerprint of optical bulk plasmon excitation. Remarkably, plasmon resonance is achieved here by using oblique incidence of light rather than phase-matching arrangements, and by exploiting charge density gradients at the film surface. This observation points to new opportunities for engineering plasmons in heterostructures., Financial support from the Spanish Ministry of Science, Innovation and Universities, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (FUNFUTURE, CEX2019-000917-S) and the MAT2017-85232-R (AEI/FEDER, EU) projects, from Generalitat de Catalunya (2017 SGR 1377), and from the COST Association (Action MP1308), is acknowledged. This work was also funded by the Deutsche Forschungsgemeinschaft (DFG) under Project No. KO 4093/1-4. T.K.H. acknowledges the Academy of Finland Flagship Programme, Photonics Research and Innovation PREIN 320166 and Academy of Finland project number 322002. The work of M.M. has been done as a part of the Ph.D. program in Physics at Universitat Autònoma de Barcelona, and was financially supported by the Spanish Ministry of Science, Innovation and Universities (BES-2015-075223). The authors are extremely thankful to Raul Solanas for his skillful operation of one PLD system used in this project (at ICMAB)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stabilization of the Ferroelectric Phase in Epitaxial Hf1–xZrxO2 Enabling Coexistence of Ferroelectric and Enhanced Piezoelectric Properties

  • Song, Tingfeng
  • Tan, Huan
  • Dix, Nico
  • Moalla, Rahma
  • Lyu, Jike
  • Saint-Girons, Guillaume
  • Bachelet, Romain
  • Sánchez Barrera, Florencio
  • Fina, Ignasi
Systematic studies on polycrystalline Hf1–xZrxO2 films with varying Zr contents show that HfO2 films are paraelectric (monoclinic). If the Zr content is increased, films become ferroelectric (orthorhombic) and then antiferroelectric (tetragonal). HfO2 shows very good insulating properties and it is used in metal-oxide-semiconductor field-effect devices, while ZrO2 shows good piezoelectric properties, but it is antiferroelectric. In between, Hf0.5Zr0.5O2 shows good ferroelectric properties at the expense of poorer insulating and piezoelectric properties than HfO2 and ZrO2, respectively. Here, we explore the ferroelectric, insulating, and piezoelectric properties of a series of epitaxial films of Hf1–xZrxO2 with different compositions. We show that epitaxial growth permits the stabilization of the ferroelectric phase in a whole range of Zr content (from x = 0 to x = 1). In epitaxial ZrO2 films, ferroelectricity coexists with better piezoelectric and insulating properties than Hf0.5Zr0.5O2, and in HfO2 epitaxial films, ferroelectricity coexists with better insulating properties than Hf0.5Zr0.5O2. For the case of ZrO2 films, large electroresistance is also observed. In both cases, the ferroelectric endurance is poorer than that for Hf0.5Zr0.5O2., Financial support from the Spanish Ministerio de Ciencia e Innovación, through the “Severo Ochoa” FUNFUTURE (CEX2019-000917-S) and the MAT2017-85232-R (AEI/ FEDER, EU), PID2019-107727RB-I00 (AEI/FEDER, EU), PID2020-112548RB-I00, and MAT2015-73839-JIN projects, from Generalitat de Catalunya (2017 SGR 1377), and from the French National Research Agency (ANR) through the projects MITO (ANR-17-CE05-0018-01), LILIT (NR-16-CE24- 0022), and DIAMWAFEL (ANR-15-CE08-0034-02) is acknowledged. I.F. acknowledges Ramón y Cajal contract RYC-2017-22531. The project was supported by a 2020 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation. T.S. and H.T. are financially supported by China Scholarship Council (CSC) with nos. 201807000104 and 201906050014, respectively. Work of T.S. and H.T. has been done as a part of their Ph.D. program in Materials Science at Universitat Autonoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of swift heavy ion irradiations on temperature dependent phononic behavior of epitaxial LaNiO3 thin film

  • Sunidhi
  • Sharma, Vishal
  • Arora, Sunil K.
  • Sánchez Barrera, Florencio
  • Singh, Fouran
  • Sathe, Vasant
The effects of Ag15+ (200 MeV) swift heavy ion irradiations on the structural and phononic properties of epitaxial LaNiO3 (LNO) thin film have been investigated using high resolution x-ray diffraction and Raman spectroscopy. After irradiation, the decrease in the out-of-plane lattice parameter of LNO toward its bulk value indicates the relaxation of epitaxial strain. The temperature dependency of phononic response for different ion irradiation doses was studied by performing the Raman measurements in a temperature range of 80−300 K. For pristine as well as irradiated samples of LNO, the observed phononic modes A1g and Eg shows softening with an increment in the temperature. The temperature coefficient of both modes varies with ion fluence. For the A1g mode, temperature coefficient increases from −0.087 cm−1K−1 for pristine to −0.092 cm−1K−1 for a maximum ion fluence of 1012 ions/cm2 , while for the Eg mode, it decreases from −0.022 cm−1K−1 for pristine to −0.015 cm−1K−1 for 1012 ions/cm2 . Raman frequency shift for both the modes shows non-linear behavior with temperature. This temperature dependent behavior was quantitatively analyzed by using a model which suggests that Raman shifts of the A1g mode emerged predominantly due to four phonon processes whereas, for the Eg mode, major contribution came from the thermal expansion effect. Ion irradiation did not change the dominating mechanism resulting in these temperature dependent Raman shifts, although the relative contribution of different processes was altered with ion fluence., This project has received funding from the EU-H2020 research and innovation program under Grant Agreement No. 654360 within NFFA-Europe transnational access activity. We would like to acknowledge PURSE-II for providing financial and technical support for this research work. We acknowledge the UGC-DAE Consortium for Scientific Research, Indore for providing Temperature dependent Raman measurement facility. We also acknowledge IUAC, New Delhi for providing ion irradiation facility. Ms. Sunidhi expresses her thanks to UGC, New Delhi for providing fellowship for research work. F. Sánchez acknowledges financial support from the Spanish Ministry of Science and Innovation, through the MAT2017-85232-R (AEI/FEDER, EU) and SEV-2015-0496 projects, and from Generalitat de Catalunya (No. 2017 SGR 1377). V. Sharma expresses his gratitude to Panjab University, Chandigarh and thereafter UGC-DAE CSR Indore for providing fellowship for carrying out research work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electron–Phonon Coupling and Electron–Phonon Scattering in SrVO3

  • Mirjolet, Mathieu
  • Rivadulla, Francisco
  • Marsik, Premysl
  • Borisov, Vladislav
  • Valentí, Roser
  • Fontcuberta, Josep
Understanding the physics of strongly correlated electronic systems has been a central issue in condensed matter physics for decades. In transition metal oxides, strong correlations characteristic of narrow d bands are at the origin of remarkable properties such as the opening of Mott gap, enhanced effective mass, and anomalous vibronic coupling, to mention a few. SrVO3 with V4+ in a 3d1 electronic configuration is the simplest example of a 3D correlated metallic electronic system. Here, the authors' focus on the observation of a (roughly) quadratic temperature dependence of the inverse electron mobility of this seemingly simple system, which is an intriguing property shared by other metallic oxides. The systematic analysis of electronic transport in SrVO3 thin films discloses the limitations of the simplest picture of e–e correlations in a Fermi liquid (FL); instead, it is shown show that the quasi-2D topology of the Fermi surface (FS) and a strong electron–phonon coupling, contributing to dress carriers with a phonon cloud, play a pivotal role on the reported electron spectroscopic, optical, thermodynamic, and transport data. The picture that emerges is not restricted to SrVO3 but can be shared with other 3d and 4d metallic oxides., Financial support from the Spanish Ministry of Science, Innovation and Universities, through the “Severo Ochoa” Programme for Centres of Excellence in R&D FUNFUTURE (CEX2019-000917-S) and the MAT2017-85232-R (AEI/FEDER, EU), from Generalitat de Catalunya (2017 SGR 1377), and from Deutsche Forschungsgemeinschaft (DFG), through TRR 288–422213477 (A05), is acknowledged. The authors would also like to acknowledge the Computer Center of the Goethe University Frankfurt for providing the computational resources. The work of M.M. has been done as a part of the Ph.D. program in Physics at Universitat Autònoma de Barcelona, and was financially supported by the Spanish Ministry of Science, Innovation and Universities (BES-2015-075223). The contribution of Clemens Lindermeir to the first stages of data analysis is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polarization and Resistive Switching in Epitaxial 2 nm Hf0.5Zr0.5O2 Tunnel Junctions

  • Sulzbach, Milena Cervo
  • Tan, Huan
  • Estandía, Saúl
  • Gázquez, Jaume
  • Sánchez Barrera, Florencio
  • Fina, Ignasi
  • Fontcuberta, Josep
In the quest for reliable and power-efficient memristive devices, ferroelectric tunnel junctions are being investigated as potential candidates. Complementary metal oxide semiconductor-compatible ferroelectric hafnium oxides are at the forefront. However, in epitaxial tunnel devices with thicknesses around ≈4–6 nm, the relatively high tunnel energy barrier produces a large resistance that challenges their implementation. Here, we show that ferroelectric and electroresistive switching can be observed in ultrathin 2 nm epitaxial Hf0.5Zr0.5O2 (HZO) tunnel junctions in large area capacitors (≈300 μm2). We observe that the resistance area product is reduced to about 160 and 65 Ω·cm2 for OFF and ON resistance states, respectively. These values are 2 orders of magnitude smaller than those obtained in equivalent 5 nm HZO tunnel devices while preserving a similar OFF/ON resistance ratio (210%). The devices show memristive and spike-timing-dependent plasticity behavior and good retention. Electroresistance and ferroelectric loops closely coincide, signaling ferroelectric switching as a driving mechanism for resistance change., Financial support from the Spanish Ministry of Science and Innovation, through the Severo Ochoa FUNFUTURE (CEX2019-000917-S), MAT2017-85232-R (AEI/FEDER, EU) and PID2019-107727RB-I00 projects, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. M.C.S. acknowledges the fellowship from "la Caixa Foundation" (ID 100010434; LCF/BQ/IN17/11620051). I.F. acknowledges Ramón y Cajal contract RYC-2017- 22531. Project supported by a 2020 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation. M.C.S and S.E. work has been done as a part of her Ph.D. program in Physics at Universitat Autònoma de Barcelona. H.T. work has been done as a part of her Ph.D. program in Material Science at Universitat Autònoma de Barcelona. S.E. acknowledges the Spanish Ministry of Economy, Competitiveness and Universities for his PhD contract (SEV-2015-0496-16-3) and its co-funding by the ESF. HT is financially supported by China Scholarship Council (CSC) with No. 201906050014. Anna Crespi and Francesc Xavier Campos are acknowledged for valuable support on structural characterization. Electron microscopy observations were carried out at the ICTS-CNME at UCM, Madrid. The authors acknowledge the ICTS-CNME for offering access to their instruments and expertise. The STEM specimens were prepared in the Service of Dual Microscopy FESEM & FIB, being part of the Central Services for Research of the University of Málaga and placed in the Supercomputing and Bioinnovation Center., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of aging on the resistive switching behavior of epitaxial strontium titanate based heterostructures

  • Sharma, Vishal
  • Sunidhi
  • Arora, Sunil K.
  • Sánchez Barrera, Florencio
  • Gupta, Vinay
  • Tomar, Monika
In this work, we investigated the impact of aging on the resistive switching behavior of high quality epitaxial heterostructure resistive switching devices [Pt/SrTiO3/LaNiO3/LaAlO3 (001) with SrTiO3 (STO) as switching layer, Pt as top electrode and LaNiO3 as bottom electrode]. For this study, the resistive switching memory devices of two different ultrathin switching layer (STO) thicknesses (5 and 10 nm) were fabricated with different shape and size of top electrode (Pt) i.e. 20 μm (circular shape) and 50 μm (square shaped). Subsequently, their resistive switching behavior at different instant of time i.e. freshly prepared, 4 months and 16 months were studied. With long aging, we find a decrease in the positive bais voltages for which current start rising exponentially (set voltages) for most of the devices besides emergence of various features such as multiple crossovers, noisy/spike region during set process and openness in the switching hysteresis loop. The existence of these behaviors is attributed to the fact that the moisture permeates through the interfacial region between top electrode (Pt) and switching layer (STO) irrespective of the thickness of switching layer and dimensions of top electrode., This project has received funding from EU-H2020 research and innovation programme under grant agreement No. 654360 within NFFA- Europe transnational access activity. We also thanks, Dr. Ignasi Fina Martinez,ICMAB-CSIC for initial electrical measurement support and group members of EMDL DU for providing technical support during electrical characterization. Vishal Sharma expresses his gratitude to Panjab University, Chandigarh and thereafter UGCDAE CSR Indore for providing fellowship for carrying out research work. Ms. Sunidhi expresses her thanks to UGC, New Delhi for providing fellowship for research work. F. Sánchez acknowledges financial support from the Spanish Ministry of Science and Innovation, through the MAT2017-85232-R (AEI/FEDER, EU), PID2020- 112548RB-I00 (AEI/FEDER, EU), and Severo Ochoa FUNFUTURE (CEX2019-000917-S) projects, and from Generalitat de Catalunya (2017 SGR 1377)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Positive Effect of Parasitic Monoclinic Phase of Hf0.5Zr0.5O2 on Ferroelectric Endurance

  • Song, Tingfeng
  • Estandía, Saúl
  • Tan, Huan
  • Dix, Nico
  • Gázquez, Jaume
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
Endurance of ferroelectric HfO2 needs to be enhanced for its use in commercial memories. This work investigates fatigue in epitaxial Hf0.5Zr0.5O2 (HZO) instead of polycrystalline samples. Using different substrates, the relative amount of orthorhombic (ferroelectric) and monoclinic (paraelectric) phases is controlled. Epitaxial HZO films almost free of parasitic monoclinic phase suffer severe fatigue. In contrast, fatigue is mitigated in films with a greater amount of paraelectric phase. This suggests that fatigue can be intrinsically pronounced in ferroelectric HZO. It is argued that the enhancement of endurance in films showing coexisting phases results from the suppression of pinned domain propagation at ferroelectric–paraelectric grain boundaries, in contrast with a rapid increase of the size of the pinned domains in single ferroelectric regions., Financial support from the Spanish Ministry of Science and Innovation, through the Severo Ochoa FUNFUTURE (CEX2019-000917-S) and the MAT2017-85232-R (AEI/FEDER, EU), PID2020-112548RB-I00 (AEI/FEDER, EU), and PID2019-107727RB-I00 (AEI/FEDER, EU) projects, from Generalitat de Catalunya (2017 SGR 1377), and from CSIC through the i-LINK (LINKA20338) program is acknowledged. I.F. and J.G. acknowledge Ramón y Cajal contracts RYC-2017-22531 and RYC-2012-11709, respectively. The project was supported by a 2020 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation. T.S. and H.T. were financially supported by China Scholarship Council (CSC) with Nos. 201807000104 and 201906050014, respectively. S.E. acknowledges the Spanish Ministry of Economy, Competitiveness and Universities for his Ph.D. contract (SEV-2015-0496-16-3) and its cofunding by the ESF. T.S., S.E., and HT works have been carried out as a part of their Ph.D. program in Materials Science at Universitat Autònoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Insights into the atomic structure of the interface of ferroelectric Hf 0.5Zr0.5O2 grown epitaxially on La2/3Sr1/3MnO3

  • Estandía, Saúl
  • Cao, Tengfei
  • Mishra, Rohan
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
  • Gázquez, Jaume
Epitaxial growth of Hf0.5Zr0.5O2 (HZO) thin films allows for the stabilization of the metastable orthorhombic phase with robust ferroelectric properties. So far, the ferroelectric phase is most commonly stabilized on perovskite substrates upon insertion of a buffer layer of La2/3Sr1/3MnO3 (LSMO); however, little is known about the role played by the LSMO buffer layer and the interface between HZO and LSMO. Inspection of a HZO/LSMO/SrTiO3 heterostructure by scanning transmission electron microscope imaging and electron energy loss spectroscopy shows that, despite the substantial structural mismatch between HZO and LSMO, the interface between them is relatively sharp spanning ∼2 atomic layers. The LSMO surface, expected to be mostly MnO2 terminated, undergoes a chemical reconstruction consisting of the substitution of the Mn cations by a mixture of Hf/Zr cations. Density functional theory calculations show that the substitution of Mn by Hf on the MnO2-terminated surface of LSMO is energetically favorable, as the higher electronegativity and valence of Hf with respect to Mn balances the surface charge of the MnO2 layer., Financial support from the Spanish Ministry of Science, Innovation and Universities, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015- 0496) and MAT2017-85232-R (AEI/FEDER, EU), PID2020- 112548RB-100 (AEI/FEDER, EU) and PID2019-107727RBI00 (MINECO/FEDER, EU) projects, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. S.E. acknowledges the Spanish Ministry of Economy, Competitiveness and Universities for his Ph.D. contract (SEV-2015-0496-16-3) and its cofunding by the ESF. S.E.’s work has been done as a part of his Ph.D. program in Materials Science at Universitat Autònoma de Barcelona. The electron microscopy performed at ORNL was supported by the Materials Sciences and Engineering Division of Basic Energy Sciences of the Office of Science of the U.S. Department of Energy. The work at Washington University was supported by the National Science Foundations (NSF) through Grant No. DMR-1931610 (T.C.) and No. DMR-1806147 (R.M.). This paper used the computational resources of the Extreme Science and Engineering Discovery Environment (XSEDE), which is supported by NSF ACI-1548562. Project supported by a 2020 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation. I.F. acknowledges Ramón y Cajal contract RYC-2017-22531., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust ferroelectricity in epitaxial Hf1/2Zr1/2O2 thin films

  • Lyu, Jike
  • Fina, Ignasi
  • Solanas, Raul
  • Fontcuberta, Josep
  • Sánchez Barrera, Florencio
Ferroelectric orthorhombic Hf0.5Zr0.5O2 thin films have been stabilized epitaxially on La2/3Sr1/3MnO3/SrTiO3(001) by pulsed laser deposition. The epitaxial orthorhombic films, (111)-oriented and with a very flat surface, show robust ferroelectric properties at room temperature. They present a remnant polarization around 20 μC/cm2 without the need of a wake-up process, a large coercive electric field of around 3 MV/cm, an extremely long retention extending well beyond 10 years, and an endurance up to about 108 cycles. Such outstanding properties in the nascent research on epitaxial HfO2-based ferroelectric films can pave the way for a better understanding of the effects of orientation, interfaces, strain, and defects on ferroelectricity in HfO2., Financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and the MAT2017-85232-R (AEI/FEDER,UE), MAT2014-56063-C2-1-R, and MAT2015-73839-JIN projects, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. I.F. acknowledges RyC contract RYC-2017-22531. J.L. was financially supported by China Scholarship Council (CSC) with No. 201506080019. J.L. work has been done as a part of his Ph.D. program in Materials Science at Universitat Autònoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Giant tuning of electronic and thermoelectric properties by epitaxial strain in p-type Sr-doped LaCrO3 transparent thin films

  • Han, Dong
  • Moalla, Rahma
  • Fina, Ignasi
  • Giordano, Valentina M.
  • d’Esperonnat, Marc
  • Botella, Claude
  • Grenet, Geneviève
  • Debord, Régis
  • Pailhès, Stéphane
  • Saint-Girons, Guillaume
  • Bachelet, Romain
The impact of epitaxial strain on the structural, electronic, and thermoelectric properties of p-type transparent Sr-doped LaCrO3 thin films has been investigated. For this purpose, high-quality fully-strained La0.75Sr0.25CrO3 (LSCO) epitaxial thin films were grown by molecular beam epitaxy on three different (pseudo)cubic (001)-oriented perovskite-oxide substrates: LaAlO3, (LaAlO3)0.3(Sr2AlTaO6)0.7, and DyScO3. The lattice mismatch between the LSCO films and the substrates induces in-plane strain ranging from -2.06% (compressive) to +1.75% (tensile). The electric conductivity can be controlled over two orders of magnitude, σ ranging from ~0.5 S cm-1 (tensile strain) to 35 S cm-1 (compressive strain). Consistently, the Seebeck coefficient S can be finely tuned by a factor of almost two from ~127 μV K-1 (compressive strain) to 208 μV K-1 (tensile strain). Interestingly, we show that the thermoelectric power factor (PF = S2 σ) can consequently be tuned by almost two orders of magnitude. The compressive strain yields a remarkable enhancement by a factor of three for 2% compressive strain with respect to almost relaxed films. These results demonstrate that epitaxial strain is a powerful lever to control the electric properties of LSCO and enhance its thermoelectric properties, which is of high interest for various devices and key applications such as thermal energy harvesters, coolers, transparent conductors, photo-catalyzers and spintronic memories., Financial support from the European Commission through the project TIPS (H2020-ICT-02-2014-1-644453), the French national research agency (ANR) through the projects MITO (ANR-17-CE05-0018), LILIT (ANR-16-CE24-0022), DIAMWAFEL (ANR-15-CE08-0034-02), the CNRS through the MITI interdisciplinary programs (project NOTE), IDEX Lyon-St-Etienne through the project IPPON, the Spanish Ministerio de Ciencia e Innovación, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV2015-0496) and the MAT2017-85232-R (AEI/FEDER, EU), PID2019-107727RB-I00 (AEI/FEDER, EU), and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. The China Scholarship Council (CSC) is acknowledged for the grant of Dong Han. Ignasi Fina acknowledges Ramón y Cajal contract RYC-2017-22531. Seebeck measurements at ILM were made within the ILMTech transport platform. The authors are also grateful to Jean-Baptiste Goure, Philippe Regreny, Aziz Benamrouche, and Bernat Bozzo for their technical support and the reviewers for their valuable and constructive comments that have improved the quality of the manuscript., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Efficient spin pumping into metallic SrVO3 epitaxial films

  • Macià, Ferran
  • Mirjolet, Mathieu
  • Fontcuberta, Josep
Spin pumping across interfaces between metallic SrVO3, where V is a 3d1 ion, epitaxial thin films and ferromagnetic Ni80Fe20 is reported. Data shows an efficient spin pumping with a spin mixing conductance value ( 11.8 × 1018 m−2) similar to that reported in metallic Vanadium but significantly larger than that measured in isoelectronic (3d1) VO2, which displays a Mott transition. Data are rationalized in terms of the relevance of density of states at the Fermi level and the relative strength of electron–electron correlations and electron-lattice coupling as toggles to tune spin-mixing conductance across interfaces., Financial support from the Spanish Ministry of Science and Innovation, through the Severo Ochoa FUNFUTURE (CEX2019-000917-S), MAT2017-85232-R (AEI/FEDER, EU), and PID2020-118479RB-I00 projects, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. F.M. acknowledges funding from MCIN/AEI/10.13039/501100011033 through grant number: PID2020-113024GB-100. We are thankful to Dr. J. Santiso for support on X-ray diffraction data collection., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Orbital occupancy and hybridization in strained SrV O 3 epitaxial films

  • Mirjolet, Mathieu
  • Vasili, Hari Babu
  • Valadkhani, Adrian
  • Santiso, José
  • Borisov, Vladislav
  • Gargiani, Pierluigi
  • Valvidares, Manuel
  • Valenti, Roser
  • Fontcuberta, Josep
Oxygen packaging in transition metal oxides determines the metal-oxygen hybridization and electronic occupation at metal orbitals. Strontium vanadate (SrVO3), having a single electron in a 3d orbital, is thought to be the simplest example of strongly correlated metallic oxides. Here, we determine the effects of epitaxial strain on the electronic properties of SrVO3 thin films, where the metal-oxide sublattice is corner connected. Using x-ray absorption and x-ray linear dichroism at the VL2,3 and O K edges, it is observed that tensile or compressive epitaxial strain change the hierarchy of orbitals within the t2g and eg manifolds. Data show a remarkable 2p−3d hybridization, as well as a strain-induced reordering of the V3d(t2g, eg) orbitals. The latter is itself accompanied by a consequent change of hybridization that modulates the hybrid π ∗ and σ ∗ orbitals and the carrier population at the metal ions, challenging a rigid band picture., Financial support from the Spanish Ministry of Science, Innovation and Universities, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (FUNFUTURE, CEX2019-000917-S) and the MAT2017-85232-R project, from the AEI/FEDER, UE (PID2020-118479RB-I00), and from Generalitat de Catalunya (2017 SGR 1377), is acknowledged. The work of M.M. has been done as a part of the Ph.D. program in Physics at Universitat Autònoma de Barcelona and was financially supported by the Spanish Ministry of Science, Innovation and Universities (BES-2015-075223). A.V. and R.V. acknowledge support by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) for funding through TRR 288-422213477 (Project B05). J.S. acknowledges support from Project No. 2017 SGR 579 from AGAUR, Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-Temperature Synthesis and Dielectric Properties of LaTaON2

  • Castets, Augustin
  • Fina, Ignasi
  • Guarín, Jhonatan R
  • Oró, Judith
  • Frontera, Carlos
  • Ritter, Clemens
  • Fontcuberta, Josep
  • Fuertes, Amparo
The development of new synthetic methodologies of perovskite oxynitrides is challenging but necessary for the search of new compounds and the investigation of new properties. Here, we report a new method of preparation of the perovskite LaTaON2 that has been investigated as a pigment and photocatalyst for water splitting. The synthesis proceeds through the solid-state reactions under N2 at 1500 °C between La2O3, LaN, and Ta3N5 or between LaN and TaON, which are completed after 3 h and lead to sintered, highly crystalline samples with particle sizes up to 1 μm. Nitrogen-deficient samples LaTaO1+xN2-x with x ≤ 0.35 are prepared by changing the N/O ratio in the mixture of reactants. Electron diffraction, synchrotron diffraction, and neutron diffraction studies on stoichiometric and nitrogen-deficient compounds indicate that they crystallize in the monoclinic space group I2/m with lattice parameters for LaTaON2 of a = 5.71458(7), b = 8.05987(10), c = 5.74772(6) Å, and β = 89.982(3)°. The three anion sites of the I2/m structure are partially occupied by oxygen and nitrogen, with a preference of nitride for two positions with occupancies of 77 and 88%. This anion distribution is different from that reported in previous studies of samples prepared by ammonolysis at lower temperature, suggesting that the synthesis conditions affect the anion order of this perovskite. Optical measurements indicate a band gap of about 1.9 eV, which is close to that observed in samples prepared by other methods. The determined dielectric permittivity for LaTaON2 εr ≈ 200, reported for the first time for a highly nitrided pseudocubic perovskite, is similar to that observed in perovskites with one nitrogen per formula., This work was supported by the Ministerio de Ciencia e Innovación, Spain [MAT2017-86616-R, MAT2017-85232-R, PID2019-107727RB-I00, PID2020-113805GB-I00, PID2020-118479RB-I00, and CEX2019-000917-S], from Generalitat de Catalunya (2017SGR1377 and 2017SGR581) and from CSIC through the i-LINK (LINKA20338) program. The authors thank Alba and ILL for beam time provision (experiments 2017092391 and 5-21-1113, respectively), Dr. François Fauth for assistance in data collection at Alba, and Dr. Bernat Bozzo (ICMAB-CSIC) for performing electrical measurements. The project was also supported by a 2020 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation. I.F. acknowledges the Ramón y Cajal contract RYC-2017-22531 and JRG acknowledges the AEAT predoctoral fellowship PRE2018-085204., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of La Concentration on Ferroelectricity of La-Doped HfO2 Epitaxial Thin Films

  • Song, Tingfeng
  • Tan, Huan
  • Bachelet, Romain
  • Saint-Girons, Guillaume
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
Epitaxial thin films of HfO2 doped with La have been grown on SrTiO3(001) and Si(001), and the impact of the La concentration on the stabilization of the ferroelectric phase has been determined. Films with 2-5 at. % La doping present the least amount of paraelectric monoclinic and cubic phases and exhibit the highest polarization, having a remanent polarization above 20 μC/cm2. The dopant concentration results in an important effect on the coercive field, which is reduced with increasing La content. Combined high polarization, high retention, and high endurance of at least 1010 cycles is obtained in 5 at. % La-doped films., Financial support from the Spanish Ministry of Science and Innovation, through the Severo Ochoa FUNFUTURE (CEX2019-000917-S), PID2020-112548RB-I00 (AEI/FEDER, EU), PID2019-107727RB-I00 (AEI/FEDER, EU), and MAT2017-85232-R (AEI/FEDER, EU) projects, from CSIC through the i-LINK (LINKA20338) program, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. Project was supported by a 2020 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation. I.F. acknowledges Ramón y Cajal Contract RYC-2017-22531. T.S. and H.T. are financially supported by China Scholarship Council (CSC) with No. 201807000104 and 201906050014, respectively. T.S. and H.T.’s work has been done as a part of their Ph.D. program in Materials Science at Universitat Autònoma de Barcelona. R.B. and G.S.G. acknowledge the financial support from the European Commission through the project TIPS (No. H2020-ICT-02-2014-1-644453), from the French national research agency (ANR) through the projects DIAMWAFEL (No. ANR-15-CE08-0034), LILIT (No. ANR-16-CE24-0022), and MITO (No. ANR-17-CE05-0018), and from CNRS through the MITI interdisciplinary programs (project NOTE). They are also grateful to the joint laboratory INL-RIBER, P. Regreny, C. Botella, and J. B. Goure for the MBE technical support on the Nanolyon technological platform., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Untwining polar contributions from light-polarization dependent photovoltaic response of LuMnO3-based ferroelectric capacitors

  • Sheng, Yunwei
  • Tan, Huan
  • Quintana, Alberto
  • Villa, Mario
  • Gázquez, Jaume
  • Fina, Ignasi
  • Fontcuberta, Josep
Narrow bandgap ferroelectrics are receiving a renewed interest for photovoltaic applications aiming at exploiting new functionalities arising from bulk photovoltaic effect (BPE). We report on the photovoltaic response of vertical capacitors of ferroelectric hexagonal LuMnO3 films sandwiched between semitransparent top electrodes (Pt, Co, Ti) and a common bottom (Pt) bottom electrode. Our results show that the presence of electrodes, other than their optical transmittance, crucially determines the imprint in the ferroelectric layer and ultimately the sensitivity of short circuit current density (Jsc) to the ferroelectric polarization direction. The use of ultrathin (7 nm) Pt top electrodes allowed to obtain a large Jsc (up to 100 mA/cm2) and an open circuit voltage of Voc ≈ 0.52 V, with a responsivity of 2 × 10−3 A/W. Yet, polarization back-switching due to imprint largely washes out the dependence of Jsc on the direction of the polarization and thus, at first sight, Jsc seemingly appears to be ruled by conventional photovoltaic response. However, a pioneering analysis of the light-polarization dependent photosensitivity, allowed to disentangle for the first time, a genuine contribution of BPE from a ubiquitous Fresnel-like contribution arising from interfaced optical media., Financial support from the Spanish Ministry of Science, Innovation and Universities, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S), MAT2017-85232-R (AEI/FEDER, EU) and PID2019-107727RB-I00 (MINECO/FEDER, EU) projects, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. I. F. acknowledges RyC Contract RYC-2017-22531. Project supported by a 2020 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation. ICTS-CNME at UCM is acknowledged for offering access to STEM microscopy and expertise. A. Q. acknowledges financial support from the Spanish Ministry of Science, Innovation and Universities through the Juan de la Cierva formación contract (FJC2019-039780-I). Y. S. and H. T. are financially supported by China Scholarship Council (CSC) with No. 201806410010 and No. 201906050014, respectively. The work of Y. S. and H. T. has been done as a part of their Ph.D. program in Materials Science at Universitat Autònoma de Barcelona., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Band Alignment and Photoresponse of LaFe O3 -Based Heterojunctions

  • Sheng, Yunwei
  • Mirjolet, Mathieu
  • Villa, Mario
  • Gázquez, Jaume
  • Santiso, José
  • Klein, Andreas
  • Fraxedas, J.
  • Fontcuberta, Josep
Epitaxial LaFeO3 (LFO)-based photocells, of different thicknesses (50-200 nm) have been grown on cubic LSAT (001) [(LaAlO3)0.3(Sr2TaAlO6)0.7] single-crystal substrates, using a La2/3Sr1/3MnO3 (LSMO) bottom electrode and different top electrodes [Pt,Ba0.95La0.05SnO3 (BLSO)], to determine their photoresponse. The measured short-circuit photocurrent first increases with LFO thickness and then decreases, and it is larger or smaller, when Pt or BLSO electrodes are used, respectively. The corresponding open-circuit voltage displays the opposite trend, being smaller or larger for Pt and BLSO, respectively, which is in excellent agreement with the electronic band alignments determined by x-ray photoelectron spectroscopy and also consistent with the rectifying character of the dark current-voltage data. It turns out that the films display a complex microstructure containing different variants, strained and relaxed, of the orthorhombic LaFeO3, that evolves with film thickness and entails the presence of strain gradients and, possibly, flexoelectric fields. We discuss these data and propose that the unavoidable grain boundaries between differently textured LaFeO3 crystallites play a significant role on the observed responsivity (2.6 × 10-4 A W-1), found to be larger than in related LFO-based structures., We are grateful to Dr Ignasi Fina for his advice when building the experimental setup. Financial support from the Spanish Ministry of Science, Innovation and Universities, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (FUNFUTURE, CEX2019-000917-S) and the MAT2017-85232-R project, from the AEI/FEDER, UE (PID2020-118479RB-I00), and from Generalitat de Catalunya (2021 SGR 00445), is acknowledged. J.S. acknowledges support from Generalitat de Catalunya (2017 SGR 579 project) and AEI/FEDER, UE (PID2019-108573GB-C21). ICTS-CNME at UCM is acknowledged for offering access to STEM microscopy and expertise. ICN2 is funded by the CERCA program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program of MINECO (Grant No. SEV-2017-0706). The work of Y.S. and M.M. is done as a part of the corresponding Ph.D. programs in Materials Science and Physics of Universitat Autònoma de Barcelona. Y.S. is financially supported by China Scholarship Council (CSC), with No. 201806410010. M.M. is financially supported by the Spanish Ministry of Science, Innovation and Universities (BES-2015-075223)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Conical magnetic structures in multiferroic SrScxFe12-xO19 hexaferrites derived from powder neutron diffraction

  • Qureshi, N.
  • Ruiz-Martin, M.D.
  • Puente-Orench, I.
  • Fernandez-Diaz, M.T.
  • Balbashov, A.M.
  • Ivanov, V.Y.
  • Skumryev, V.
  • Mukhin, A.A.
We present a systematic powder neutron diffraction study on Sr-based M-type hexaferrites SrScxFe12-xO19 using high-resolution and high-flux instruments. We have derived the magnetic configurations for the compounds with x = 1.4, 1.6, and 1.8 at room temperature and at 2 K revealing a ferrimagnetic structure and a complex conical magnetic structure, respectively, where the latter is decomposed into the axial ferrimagnetic and the helicoidally modulated component in the hexagonal a-b plane. Our temperature- and composition-dependent investigation reveals that doping nonmagnetic Sc into this system reinforces the frustration and pushes the transition between the two ordered phases toward higher temperatures. The continuous opening of the spin cone suggests a smooth transition from an easy-axis toward an easy-plane anisotropy with decreasing temperature, which can be reinforced by increasing Sc content.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hidden magnetic states emergent under electric field, in a room temperature composite magnetoelectric multiferroic

  • Clarkson, J. D.
  • Fina, Ignasi|||0000-0003-4182-6194
  • Liu, Z. Q.
  • Lee, Y.
  • Kim, J.
  • Frontera, Carlos|||0000-0002-0091-4756
  • Cordero Edwards, Kumara|||0000-0003-3721-7863
  • Wisotzki, S.
  • Sáncherz, F.
  • Sort, Jordi|||0000-0003-1213-3639
  • Hsu, S. L.
  • Ko, C.
  • Aballe, Lucía|||0000-0003-1810-8768
  • Foerster, Michael|||0000-0002-4147-6668
  • Wu, J.
  • Christen, H. M.
  • Heron, J. T.
  • Schlom, Darrell G.|||0000-0003-2493-6113
  • Salahuddin, S.
  • Kioussis, N.
  • Fontcuberta, Josep|||0000-0002-7955-2320
  • Martí, X.
  • Ramesh, Ramamoorthy
The ability to control a magnetic phase with an electric field is of great current interest for a variety of low power electronics in which the magnetic state is used either for information storage or logic operations. Over the past several years, there has been a considerable amount of research on pathways to control the direction of magnetization with an electric field. More recently, an alternative pathway involving the change of the magnetic state (ferromagnet to antiferromagnet) has been proposed. In this paper, we demonstrate electric field control of the Anomalous Hall Transport in a metamagnetic FeRh thin film, accompanying an antiferromagnet (AFM) to ferromagnet (FM) phase transition. This approach provides us with a pathway to "hide" or "reveal" a given ferromagnetic region at zero magnetic field. By converting the AFM phase into the FM phase, the stray field, and hence sensitivity to external fields, is decreased or eliminated. Using detailed structural analyses of FeRh films of varying crystalline quality and chemical order, we relate the direct nanoscale origins of this memory effect to site disorder as well as variations of the net magnetic anisotropy of FM nuclei. Our work opens pathways toward a new generation of antiferromagnetic - ferromagnetic interactions for spintronics.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Towards Oxide Electronics, a Roadmap

  • Coll, Mariona|||0000-0001-5157-7764
  • Fontcuberta, Josep|||0000-0002-7955-2320
  • Althammer, Matthias
  • Bibes, Manuel|||0000-0002-6704-3422
  • Boschker, Hans
  • Calleja, Ana
  • Cheng, Guanglei
  • Cuoco, Mario|||0000-0002-7325-8331
  • Dittmann, Regina|||0000-0003-1886-1864
  • Dkhil, Brahim|||0000-0002-9862-625X
  • El Baggari, Ismail
  • Fanciulli, Marco|||0000-0003-2951-0859
  • Fina, Ignasi|||0000-0003-4182-6194
  • Fortunato, Elvira|||0000-0002-4202-7047
  • Frontera, Carlos|||0000-0002-0091-4756
  • Fujita, Shizuo
  • Garcia, Vincent|||0000-0002-7230-8130
  • Goennenwein, Sebastian T. B.
  • Granqvist, Claes Göran
  • Grollier, Julie
  • Gross, Rudolf|||0000-0003-4524-7552
  • Hagfeldt, Anders|||0000-0001-6725-8856
  • Herranz Casabona, Gervasi|||0000-0003-4633-4367
  • Hono, Kazuhiro|||0000-0001-7367-0193
  • Houwman, Evert|||0000-0003-2722-6045
  • Huijben, Mark|||0000-0001-8175-6958
  • Kalaboukhov, Aleksey
  • Keeble, David J.|||0000-0002-5378-799X
  • Koster, Gertjan
  • Kourkoutis, Lena Fitting|||0000-0002-1303-1362
  • Levy, Jeremy
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Driscoll, Judith|||0000-0003-4987-6620
  • Mannhart, Jochen|||0000-0001-6331-2640
  • Martins, Rodrigo|||0000-0002-1997-7669
  • Menzel, Stephan
  • Mikolajick, Thomas|||0000-0003-3814-0378
  • Napari, Mari|||0000-0003-2690-8343
  • Nguyen, Duc Minh
  • Niklasson, Gunnar A.|||0000-0002-8279-5163
  • Paillard, Charles|||0000-0002-3337-2295
  • Panigrahi, Shrabani|||0000-0003-2294-8348
  • Rijnders, Guus
  • Sánchez Barrera, Florencio|||0000-0002-5314-453X
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
  • Sanna, Simone|||0000-0002-9206-9421
  • Schlom, Darrell G.|||0000-0003-2493-6113
  • Schroeder, Uwe|||0000-0002-6824-2386
  • Shen, Kyle M.
  • Siemon, Anne
  • Spreitzer, Matjaž
  • Sukegawa, Hiroaki|||0000-0002-4034-7848
  • Tamayo Buisán, Rubén
  • van den Brink, Jeroen P.
  • Pryds, Nini|||0000-0002-5718-7924
  • Miletto Granozio, Fabio|||0000-0002-9417-7848
At the end of a rush lasting over half a century, in which CMOS technology has been experiencing a constant and breathtaking increase of device speed and density, Moore's law is approaching the insurmountable barrier given by the ultimate atomic nature of matter. A major challenge for 21st century scientists is finding novel strategies, concepts and materials for replacing silicon-based CMOS semiconductor technologies and guaranteeing a continued and steady technological progress in next decades. Among the materials classes candidate to contribute to this momentous challenge, oxide films and heterostructures are a particularly appealing hunting ground. The vastity, intended in pure chemical terms, of this class of compounds, the complexity of their correlated behaviour, and the wealth of functional properties they display, has already made these systems the subject of choice, worldwide, of a strongly networked, dynamic and interdisciplinary research community. Oxide science and technology has been the target of a wide four-year project, named Towards Oxide-Based Electronics (TO-BE), that has been recently running in Europe and has involved as participants several hundred scientists from 29 EU countries. In this review and perspective paper, published as a final deliverable of the TO-BE Action, the opportunities of oxides as future electronic materials for Information and Communication Technologies ICT and Energy are discussed. The paper is organized as a set of contributions, all selected and ordered as individual building blocks of a wider general scheme. After a brief preface by the editors and an introductory contribution, two sections follow. The first is mainly devoted to providing a perspective on the latest theoretical and experimental methods that are employed to investigate oxides and to produce oxide-based films, heterostructures and devices. In the second, all contributions are dedicated to different specific fields of applications of oxide thin films and heterostructures, in sectors as data storage and computing, optics and plasmonics, magnonics, energy conversion and harvesting, and power electronics.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Disentangling Highly Asymmetric Magnetoelectric Effects in Engineered Multiferroic Heterostructures

  • Menéndez, Enric|||0000-0003-3809-2863
  • Sireus, Verònica
  • Quintana, Alberto|||0000-0002-9813-735X
  • Fina, Ignasi|||0000-0003-4182-6194
  • Casals, Blai|||0000-0002-2941-1861
  • Cichelero, Rafael
  • Kataja, Mikko
  • Stengel, Massimiliano|||0000-0003-4175-3888
  • Herranz Casabona, Gervasi|||0000-0003-4633-4367
  • Catalan, Gustau|||0000-0003-0214-4828
  • Baró, M. D.|||0000-0002-8636-1063
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Sort, Jordi|||0000-0003-1213-3639
One of the main strategies to control magnetism by voltage is the use of magnetostrictive-piezoelectric hybrid materials, such as ferromagnetic-ferroelectric heterostructures. When such heterostructures are subjected to an electric field, piezostrain-mediated effects, electronic charging, and voltage-driven oxygen migration (magnetoionics) may simultaneously occur, making the interpretation of the magnetoelectric effects not straightforward and often leading to misconceptions. Typically, the strain-mediated magnetoelectric response is symmetric with respect to the sign of the applied voltage because the induced strain (and variations in the magnetization) depends on the square of the ferroelectric polarization. Conversely, asymmetric responses can be obtained from electronic charging and voltage-driven oxygen migration. By engineering a ferromagnetic-ferroelectric hybrid consisting of a magnetically soft 50-nm thick Fe75Al25 (at. %) thin film on top of a (110)-oriented Pb(Mg1/3Nb2/3)O3-32PbTiO3 ferroelectric crystal, a highly asymmetric magnetoelectric response is obtained and the aforementioned magnetoelectric effects can be disentangled. Specifically, the large thickness of the Fe75Al25 layer allows dismissing any possible charge accumulation effect, whereas no evidence of magnetoionics is observed experimentally, as expected from the high resistance to oxidation of Fe75Al25, leaving strain as the only mechanism to modulate the asymmetric magnetoelectric response. The origin of this asymmetric strain-induced magnetoelectric effect arises from the asymmetry of the polarization reversal in the particular crystallographic orientation of the ferroelectric substrate. These results are important to optimize the performance of artificial multiferroic heterostructures.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Independent Tuning of Optical Transparency Window and Electrical Properties of Epitaxial SrVO3 Thin Films by Substrate Mismatch

  • Mirjolet, Mathieu|||0000-0002-8471-3184
  • Vasili, Hari Babu|||0000-0002-3356-6436
  • López Conesa, Lluís|||0000-0003-1456-079X
  • Estrade, Sonia|||0000-0002-3340-877X
  • Peiro, Francesca|||0000-0002-5697-0554
  • Santiso, José|||0000-0003-4274-2101
  • Sánchez Barrera, Florencio|||0000-0002-5314-453X
  • Machado, Pamela|||0000-0002-4235-0370
  • Gargiani, Pierluigi|||0000-0002-6649-0538
  • Valvidares, Manuel|||0000-0003-4895-8114
  • Fontcuberta, Josep|||0000-0002-7955-2320
Transparent metallic oxides are pivotal materials in information technology, photovoltaics, or even in architecture. They display the rare combination of metallicity and transparency in the visible range because of weak interband photon absorption and weak screening of free carriers to impinging light. However, the workhorse of current technology, indium tin oxide (ITO), is facing severe limitations and alternative approaches are needed. AMO perovskites, M being a nd transition metal, and A an alkaline earth, have a genuine metallic character and, in contrast to conventional metals, the electron-electron correlations within the nd band enhance the carriers effective mass (m*) and bring the transparency window limit (marked by the plasma frequency, ω*) down to the infrared. Here, it is shown that epitaxial strain and carrier concentration allow fine tuning of optical properties (ω*) of SrVO films by modulating m* due to strain-induced selective symmetry breaking of 3d-t(xy, yz, xz) orbitals. Interestingly, the DC electrical properties can be varied by a large extent depending on growth conditions whereas the optical transparency window in the visible is basically preserved. These observations suggest that the harsh conditions required to grow optimal SrVO films may not be a bottleneck for their future application.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Topochemical nitridation of Sr2FeMoO6

  • Ceravola, Roberta|||0000-0002-3785-3854
  • Frontera, Carlos|||0000-0002-0091-4756
  • Oró-Solé, Judith|||0000-0002-3755-4950
  • Black Serra, Ashley Phillip|||0000-0001-7929-5144
  • Ritter, Clemens
  • Mata, Ignasi|||0000-0002-4835-9659
  • Molins Grau, Elies|||0000-0003-1012-0551
  • Fontcuberta, Josep|||0000-0002-7955-2320
  • Fuertes, Amparo|||0000-0001-5338-9724
The topotactic nitridation of cation ordered, tetragonal SrFeMoO in NH at moderate temperatures leads to cubic, Fm3m double perovskite oxynitride SrFeMoON where double-exchange interactions determine ferromagnetic order with T ≈ 100 K. Substitution of oxide by nitride induces bond asymmetries and local electronically driven structural distortions, which combined with Fermi level lowering restricts charge itinerancy to confined regions and preclude spontaneous long-range magnetic order. Under a magnetic field, ferromagnetic correlations expand, favoring charge delocalization and a negative magnetoresistance is observed.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Local manipulation of metamagnetism by strain nanopatterning

  • Foerster, Michael|||0000-0002-4147-6668
  • Menéndez, Enric|||0000-0003-3809-2863
  • Coy, Emerson|||0000-0002-4149-9720
  • Quintana, Alberto|||0000-0002-9813-735X
  • Gómez-Olivella, Carles|||0000-0002-1656-2951
  • Esqué-de los Ojos, Daniel|||0000-0002-6279-2037
  • Vallcorba Valls, Oriol|||0000-0001-6499-7688
  • Frontera, Carlos|||0000-0002-0091-4756
  • Aballe, Lucía|||0000-0003-1810-8768
  • Nogués, Josep|||0000-0003-4616-1371
  • Sort, Jordi|||0000-0003-1213-3639
  • Fina, Ignasi|||0000-0003-4182-6194
Among metamagnetic materials, FeRh alloys are technologically appealing due to their uncommon antiferromagnetic-to-ferromagnetic metamagnetic transition which occurs at a temperature T* just above room temperature. Here, a controlled increase of T* (ΔT* ∼ 20 °C) is induced in pre-selected regions of FeRh films via mechanical strain nanopatterning. Compressive stresses generated at the vicinity of pre-defined nanoindentation imprints cause a local reduction of the FeRh crystallographic unit cell parameter, which leads to an increase of T* in these confined micro-/nanometric areas. This enhances the stability of the antiferromagnetic phase in these localized regions. Remarkably, generation of periodic arrays of nanopatterned features also allows modifying the overall magnetic and electric transport properties across large areas of the FeRh films. This approach is highly appealing for the design of new memory architectures or other AFM-spintronic devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

On the promotion of catalytic reactions by surface acoustic waves

  • von Boehn, Bernhard|||0000-0003-3722-5767
  • Foerster, Michael|||0000-0002-4147-6668
  • von Boehn, Moritz
  • Prat Albert, Jordi|||0000-0002-9708-4831
  • Macià, Ferran|||0000-0001-5972-4810
  • Casals, Blai|||0000-0002-2941-1861
  • Khaliq, Muhammad Waqas|||0000-0002-9696-3498
  • Hernández-Mínguez, Alberto
  • Aballe, Lucía|||0000-0003-1810-8768
  • Imbihl, Ronald|||0000-0002-5155-7250
Surface acoustic waves (SAW) allow to manipulate surfaces with potential applications in catalysis, sensor and nanotechnology. SAWs were shown to cause a strong increase in catalytic activity and selectivity in many oxidation and decomposition reactions on metallic and oxidic catalysts. However, the promotion mechanism has not been unambiguously identified. Using stroboscopic X-ray photoelectron spectro-microscopy, we were able to evidence a sub-nanosecond work function change during propagation of 500 MHz SAWs on a 9 nm thick platinum film. We quantify the work function change to 455 μeV. Such a small variation rules out that electronic effects due to elastic deformation (strain) play a major role in the SAW-induced promotion of catalysis. In a second set of experiments, SAW-induced intermixing of a five monolayers thick Rh film on top of polycrystalline platinum was demonstrated to be due to enhanced thermal diffusion caused by an increase of the surface temperature by about 75 K when SAWs were excited. Reversible surface structural changes are suggested to be a major cause for catalytic promotion. Surface acoustic waves (SAWs) are dynamic lattice distortions, which can be excited on piezoelectric materials. For many years a promotion of the catalytic activity and selectivity by SAWs has been known, but no mechanistic understanding has been established yet. We quantify the effect that SAWs have on the electronic and geometric structure of a model catalyst, providing a basis for discussing the promotion mechanism of SAWs in catalytic surface reactions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Control of the polarization of ferroelectric capacitors by the concurrent action of light and adsorbates

  • Liu, Fanmao|||0000-0001-7590-8062
  • Fina, Ignasi|||0000-0003-4182-6194
  • Sauthier, Guillaume|||0000-0003-3566-3878
  • Sánchez Barrera, Florencio|||0000-0002-5314-453X
  • Rappe, Andrew M.|||0000-0003-4620-6496
  • Fontcuberta, Josep|||0000-0002-7955-2320
Ferroelectric perovskites hold promise of enhanced photovoltaic efficiency and photocatalytic activity. Consequently, the photoresponse of oxide ferroelectric thin films is an active field of research. In electrode/ferroelectric/electrode devices, internal charge in the ferroelectric, free charge in the electrodes, and buried adsorbates at interfaces combine to screen the ferroelectric polarization and to stabilize the polar state. Under illumination, photoinduced carriers and photodissociated adsorbates may disrupt the screening equilibrium, modifying the switchable polarization and altering its expected benefits. Here, we explore the photoresponse of BaTiO thin films in a capacitor geometry, focusing on the effects of visible illumination on the remanent polarization. By combining ferroelectric and X-ray photoelectron spectroscopy, we discover that photoreaction of charge-screening HO-derived adsorbates at the buried metal-ferroelectric Pt/BaTiO interface plays an unexpected pivotal role, enabling a substantial modulation (up to 75%) of the switchable remanent polarization by light. These findings illustrate that the synergy between photochemistry and photovoltaic activity at the surface of a ferroelectric material can be exploited to tune photoferroelectric activity.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Proof of the elusive high-temperature incommensurate phase in CuO by spherical neutron polarimetry

  • Qureshi, Navid|||0000-0002-0727-2258
  • Ressouche, Eric
  • Mukhin, Alexander|||0000-0003-3113-1110
  • Gospodinov, Marin
  • Skumryev, Vassil|||0000-0003-1375-4824
After three decades of research on CuO, the AF3 phase is proven by neutrons, which clears up the mystery of symmetry-broken phases. CuO is the only known binary multiferroic compound, and due to its high transition temperature into the multiferroic state, it has been extensively studied. In comparison to other prototype multiferroics, the nature and even the existence of the high-temperature incommensurate paraelectric phase (AF3) were strongly debated-both experimentally and theoretically-since it is stable for only a few tenths of a kelvin just below the Néel temperature. Until now, there is no proof by neutron diffraction techniques owing to its very small ordered Cu magnetic moment. Here, we demonstrate the potential of spherical neutron polarimetry, first, in detecting magnetic structure changes, which are not or weakly manifest in the peak intensity and, second, in deducing the spin arrangement of the so far hypothetic AF3 phase. Our findings suggest two coexisting spin density waves emerging from an accidental degeneracy of the respective states implying a delicate energy balance in the spin Hamiltonian.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ex vivo assessment and in vivo validation of non-invasive stent monitoring techniques based on microwave spectrometry

  • Gálvez-Montón, Carolina|||0000-0003-2254-9371
  • Arauz-Garofalo, Gianluca|||0000-0001-5166-6054
  • Rodriguez-Leor, Oriol|||0000-0003-2657-5657
  • Soler-Botija, Carolina|||0000-0002-4584-9134
  • Amorós García de Valdecasas, Susana
  • Gerez-Britos, Flavio David
  • Bayés-Genís, Antoni|||0000-0002-3044-197X
  • O'Callaghan, Juan Manuel|||0000-0002-2740-0202
  • Macià, Ferran|||0000-0001-5972-4810
  • Tejada, Javier|||0000-0001-9246-5566
Some conditions are well known to be directly associated with stent failure, including in-stent re-occlusion and stent fracture. Currently, identification of these high-risk conditions requires invasive and complex procedures. This study aims to assess microwave spectrometry (MWS) for monitoring stents non-invasively. Preliminary ex vivo data are presented to move to in vivo validation. Fifteen mice were assigned to receive subcutaneous stent implantations (n = 10) or sham operations (n = 5). MWS measurements were carried out at 0, 2, 4, 7, 14, 22, and 29 days of follow-up. Additionally, 5 stented animals were summited to micro-CT analyses at the same time points. At 29 days, 3 animals were included into a stent fracture subgroup and underwent a last MWS and micro-CT analysis. MWS was able to identify stent position and in-stent stenosis over time, also discerning significant differences from baseline measures (P < 0.001). Moreover, MWS identified fractured vs. non-fractured stents in vivo. Taken together, MWS emerges as a non-invasive, non-ionizing alternative for stent monitoring. MWS analysis clearly distinguished between in-stent stenosis and stent fracture phenomena.