Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 73
Encontrada(s) 1 página(s)

Repisalud
Publication Artículo científico (JournalArticle)

Comparative intracellular cytokine production by in vitro stimulated T lymphocytes from human umbilical cord blood (HUCB) and adult peripheral blood (APB).

  • García Vela, J A
  • Delgado, I
  • Bornstein, R
  • Alvarez, B
  • Auray, M C
  • Martin, I
  • Oña, F
  • Gilsanz, F
To date over 400 HUCB transplants have been reported from different centers. It has been suggested that there is a reduced graft-versus-host-disease (GVHD) with HUCB compared to bone marrow transplantation. Since cytokine production by a cell is an indication of the cells function it is important to determinate the differences between APB and HUCB with respect to production of these soluble factors. Our aim was to analyse the intracellular cytokine production by HUCB and APB T lymphocytes with and emphasize on their possible role in GVHD. Heparinized HUCB samples from 8 normal full-term deliveries and 10 normal blood donors were stimulated 4 hours at 37 degrees C and 5% CO2 with phorbol 12-myristate 13-acetate (PMA) and lonomycin in the presence of brefeldine. Afterwards cells were stained with CD3, CD4 or CD8 in different combinations. Finally, after cell permeabilization, cells were stained with Il-2, Il-4 or IFN-gamma. Data acquisition was performed on a FACScan flow cytometer. Compared to APB, HUCB T lymphocytes produced less Il-2, Il-4 and IFN-gamma. In HUCB, Il-2, Il-4 and IFN-gamma were produced predominantly by CD4+ T cells. In APB, Il-2 and Il-4 were also produced predominantly by CD4+ cells compared with CD8+ T lymphocytes, however, IFN-gamma was produced by both CD4+ and CD8+ T cells. These results indicate that there are clear differences in the cytokine profile between T cells in APB and HUCB.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Manufacturing tolerance analysis of an MMI-Based 90 degrees optical hybrid for InP integrated coherent receivers

  • Sánchez Fandiño, Javier Antonio
  • P. Muñoz|||0000-0001-6026-1649
[EN] A numerical study of the impact that manufacturing tolerances have on the performance of an InP 4 × 4 MMI working as a 90° optical hybrid is presented, including simultaneous variations of width, thickness, and refractive index over the C and L bands. Simulation results for different figures of merit, such as optical common-mode rejection ratios (CMRRs) and phase errors, are provided for both nominal and worst case scenarios. Additionally, system simulations are performed to compute imbalance-induced power penalty. Our results indicate that the combined effect of realistic foundry tolerances on device performance is significant. In particular, a fourfold reduction is predicted between nominal (≃40 nm) and worst cases (≃10 nm) when optical CMRRs and phase errors are compared against Optical Internetworking Forum specifications. By contrast, a much greater bandwidth is expected at the system level (≥ 40 nm) if a power penalty of less than 1 dB (@BER = 10-3) is to be allowed. In fact, worst case power penalties lower than 0.25 dB are predicted over the full C band, which further proves the great potential of integrated 4 × 4 MMIs as wide-bandwidth devices for mass production of coherent receivers using state-of-the-art integration technologies., This work was supported in part by the Spanish MICINN Project TEC2010-21337, acronym ATOMIC, and in part by projects FEDER UPVOV10-3E-492 and UPVOV08-3E-008. The work of J. S. Fandin˜o was supported by Grant FPU-2010 (ref: AP2010-1595). The authors are also grateful to the EuroPIC consortium (FP7 funded programme NMP 228839-2) for access to the design manual and design toolkit of the generic InP fab.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Scalable UWB photonic generator based on the combination of doublet pulses

  • Moreno, Vanessa
  • Rius Mercado, Manuel
  • Muriel, Miguel A.
  • Mora Almerich, José|||0000-0002-2877-4118
  • Capmany Francoy, José|||0000-0002-6460-4167
We propose and experimentally demonstrate a scalable and reconfigurable optical scheme to generate high order UWB pulses. Firstly, various ultra wideband doublets are created through a process of phase-to-intensity conversion by means of a phase modulation and a dispersive media. In a second stage, doublets are combined in an optical processing unit that allows the reconfiguration of UWB high order pulses. Experimental results both in time and frequency domains are presented showing good performance related to the fractional bandwidth and spectral efficiency parameters., The research leading to these results has been funded by the national project TEC2010-21303-C04-02 and TEC2011-26642 funded by the Ministerio de Economia y Competitividad and the projects FEDER UPVOV08-3E-008 and UPVOV10-3E-492. Also, the authors wish to acknowledge the financial support given by the Generalitat Valenciana under the Research Excellency Award Program GVA PROMETEO 2013/012 Next Generation Microwave Photonic technologies.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of annealing atmosphere on photoelectrochemical response of TiO2 nanotubes anodized under controlled hydrodynamic conditions

  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • García-García, D.M.|||0000-0001-8951-4558
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Solsona, B.
  • Sánchez-Tovar, R.
  • Fernández Domene, R.M.
[EN] The influence of three annealing atmospheres (air, nitrogen and argon) and the use of controlled hydrodynamic conditions (from 0 to 5000 rpm) on morphological, structural, chemical and photoelectrochemical properties of TiO2 nanotubes have been evaluated. For this purpose, different characterization techniques have been used: Field Emission Scanning Electron Microscopy, Raman Confocal Laser Spectroscopy, X-Ray Diffraction, X-Ray Photoelectron Spectroscopy, Incident Photon-to-electron Conversion Efficiency measurements, ultraviolet-visible absorption spectra, Mott-Schottky analysis and photoelectrochemical water splitting tests. According to the results, it can be concluded that both hydrodynamic conditions and annealing in non-oxidizing atmospheres improve the photoelectrochemical response of the TiO2 nanotubes. This fact has been attributed to the oxygen vacancies formed after annealing in argon and nitrogen atmospheres and also to the presence of nitrogen into the TiO2 lattice due to the thermal treatment in the nitrogen atmosphere., The authors would like to express their gratitude for the financial support to the "Generalitat Valenciana (GV/2020/044) " as well as to the "Agencia Estatal de Investigacion" (Project Code: PID2019-105844RB-I00/AEI/10.13039/501100011033) ", for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and the co-finance by the European Social Fund. Authors from UV also thank MINECO (MAT2017-84118-C2-1-R project) and FEDER for funding.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Reconfigurable lattice mesh designs for programmable photonic processors

  • Pérez-López, Daniel
  • Soref, Richard A.
  • Gasulla Mestre, Ivana|||0000-0001-8088-7796
  • Capmany Francoy, José|||0000-0002-6460-4167
[EN] We propose and analyse two novel mesh design geometries for the implementation of tunable optical cores in programmable photonic processors. These geometries are the hexagonal and the triangular lattice. They are compared here to a previously proposed square mesh topology in terms of a series of figures of merit that account for metrics that are relevant to on-chip integration of the mesh. We find that that the hexagonal mesh is the most suitable option of the three considered for the implementation of the reconfigurable optical core in the programmable processor., The authors wish to acknowledge the financial support given by the Research Excellency Award Program GVA PROMETEO II/2013/012, Spanish MINECO projects TEC2013-42332-P PIF4ESP, TEC2015-69787-REDT PIC4TB and TEC2014-60378-C2-1-R MEMES, as well as the projects FEDER UPVOV 10-3E-492 and FEDER UPVOV 08-3E-008. The work of D. Perez was supported by the FPI-UPV Grant Program from the Universitat Politecnica de Valencia and the work of I. Gasulla was supported by the Spanish MINECO through the Ramon y Cajal Program. R. Soref is supported by the Air Force Office of Scientific Research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

UWB Monocycle Generator Based on the Non-Linear Effects of an SOA-Integrated Structure

  • Moreno, Vanessa
  • Rius Mercado, Manuel
  • Muriel, Miguel A.
  • Mora Almerich, José|||0000-0002-2877-4118
  • Capmany Francoy, José|||0000-0002-6460-4167
In this paper, we propose and experimentally demonstrate a novel and single structure to generate ultra-wideband pulses by means of the cross-phase modulation present in a semiconductor optical amplifier unified structure. The key components of this system is an integrated Mach-Zehnder interferometer with two SOAs and an optical processing unit. The fusion of these two components permits the generation and customization of UWB monocycle pulses. The polarity of the output pulses is easily modified through the single selection of a specific input port. Moreover, the capacity of transmitting several data sequences is demonstrated and the potentiality to adapt the system to different modulation formats is analyzed., This work was supported in part by the National Project under Grants TEC2010-21303-C04-02 and TEC2011-26642, through the Ministerio de Economia y Competitividad; in part by the FEDER under Projects UPVOV08-3E-008 and UPVOV10-3E-492; in part by the Generalitat Valenciana through the Research Excellency Award Program GVA PROMETEO under Grant 2013/012, Next Generation Microwave Photonic technologies.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A monolithic integrated photonic microwave filter

  • Sanchez Fandiño, Javier Antonio
  • Doménech Gómez, José David
  • P. Muñoz|||0000-0001-6026-1649
  • Capmany Francoy, José|||0000-0002-6460-4167
[EN] Meeting the increasing demand for capacity in wireless networks requires the harnessing of higher regions in the radiofrequency spectrum, reducing cell size, as well as more compact, agile and power-efficient base stations that are capable of smoothly interfacing the radio and fibre segments. Fully functional microwave photonic chips are promising candidates in attempts to meet these goals. In recent years, many integrated microwave photonic chips have been reported in different technologies. To the best of our knowledge, none has monolithically integrated all the main active and passive optoelectronic components. Here, we report the first demonstration of a tunable microwave photonics filter that is monolithically integrated into an indium phosphide chip. The reconfigurable radiofrequency photonic filter includes all the necessary elements (for example, lasers, modulators and photodetectors), and its response can be tuned by means of control electric currents. This is an important step in demonstrating the feasibility of integrated and programmable microwave photonic processors., The authors acknowledge financial support from the Spanish Centro para el Desarrollo Tecnologico Industrial (CDTI) through the NEOTEC start-up programme, the European Commission through the 7th Research Framework Programme project, Photonic Advanced Research and Development for Integrated Generic Manufacturing (FP7-PARADIGM), the Generalitat Valenciana through the Programa para grupos de Investigacion de Excelencia (PROMETEO) project code 2013/012, the Spanish Ministerio de Economia y Comercio (MINECO) via project TEC2013-42332-P, PIF4ESP, and the Unwersitat Politecnica de Valencia (UPVOV) through projects 10-3E-492 and 08-3E-008 funded by the Fondos Europeos de Desarrollo Regional (FEDER). J.S. Fandino acknowledges financial support from Formacion de Profesorado Universitario (FPU) grant AP2010-1595.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Degradation of Diazinon based on photoelectrocatalytic technique using enhanced WO3 nanostructures: Mechanism and pathway

  • Roselló-Márquez, Gemma
  • Fernández-Domene, Ramón Manuel
  • Sánchez-Tovar, Rita
  • Cifre-Herrando, Mireia|||0000-0002-8800-3585
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] In this work, a resistant and toxic pesticide called diazinon was degraded through the photoelectrocatalysis (PEC) technique using tungsten oxide (WO3) nanostructures, applying an external bias of 1VAg/AgCl and simulated solar illumination. For this, WO3 nanostructures have been synthesized using electrochemical anodization in 0.05 M hydrogen peroxide and 1.5 M of different acidic electrolytes: H2SO4, CH4O3S or HNO3. Morphology, composition and crystallinity of the samples were evaluated through Field Emission Scanning Electron Microscopy (FE-SEM), Atomic Force Microscopy (AFM) and Raman Spectroscopy. Then, the photoelectrochemical properties of the samples were analyzed by Photo-Electrochemical Impedance Spectroscopy (PEIS). The conclusion obtained with these studies was that the nanostructures obtained in the CH4O3S-H2O2 electrolyte presented better photoelectrochemical behavior than the others. The degradation process was checked by UV-Visible, and through Ultra High-Performanc liquid Chromatography and Mass Spectrometry (UHPLC-Q-TOF/MS) the courses of the experiments have been controlled and five possible degradation intermediates have been identified. Finally, after 24 h of experiment, 90% degradation efficiency has been achieved, since it has been possible to decrease from 20 ppm to 2 ppm., Authors would like to show their gratitude for the financial support to the Ministerio de Ciencia e Innovacion (Project code: PID2019105844RB-I00) in the acquisition of Laser Raman Microscope (UPOV083E-012) and for the co-finance by the European Social Fund. Authors would also want to express thanks the Ministerio de Ciencia, Innovacion y Universidades (Project Code: CTQ2017-90659-REDT) and the Generalitat Valenciana for its support in the Atomic Force Microscope and UHPLC-Q-TOF/MS purchase (IDIFEDER/2018/044). Ramon M. Fernandez Domene also express gratitude to the Universitat Politecnica de Valencia (UPV) for the post-doctoral granting (PAID-10-17) and Gemma Rosello Marquez also thanks the Generalitat Valenciana for the pre-doctoral granting (ACIF/2018/159).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of laser irradiation on failure mechanism of TiCp reinforcedtitanium composite coating produced by laser cladding

  • Candel Bou, Juan José
  • Jiménez, J.A.
  • Franconetti Rodríguez, Patricia
  • Amigó, Vicente|||0000-0002-2107-0273
[EN] Laser cladding is an effective technique to coat a metallic substrate with a layer of a different nature.It has been widely reported that the most important combined parameters controlling the quality ofthe coating are the specific energy (E) and the powder density ( ). In the present work, clad depositsof Ti6Al4V + 60 wt.% TiC were prepared on a Ti6Al4V substrate using an optimum combination of Ec= 24 J/mm2 and c= 3 mg/mm2. These experiments were performed using a laser power of 400 and600 W, in order to study the effect of laser power on the properties of the clad. The microstructure, phasecomposition and nanohardness of the coatings were investigated by optical microscopy, scanning elec-tron microscopy and X-ray diffraction. During laser processing, TiC can be partially converted to TiCX(X = 0.5) due mainly to the TiC dissolution into the laser-generated melting pool and subsequent precipi-tation during cooling. It was observed that the lower laser power limit reduces primary TiC dissolution butit also promotes secondary carbide alignment at the interface. On the other hand, the damage mechanisminduced by high laser power is dominated by primary TiC particle cracking by the high stress concentra-tion at the particle matrix interface followed by ductile failure of the matrix. It is also remarkable thatirradiance affects the TiC/TiCxratio despite Ecand care fixed and it determines hardness distributioninside the coating., Authors thank MINECO funding in special the Training of Research Staff programme with the help BES-2009-013589 and the support of the Comision Interministerial de Ciencia y Tecnologia (CICYT), Spain, under Grant MAT2012-39124. This work was developed at the Materials Technology Unit of the Polytechnic University of Valencia associated to CSIC through the National Centre for Metallurgical Research (CENIM). Finally, thank the EU for the funding received through the FEDER help in the project UPOV08-3E-005 for the purchase of equipment and the Generalitat Valenciana for the help ACOMP/2012/094.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Figures of merit for microwave photonic phase shifters based on semiconductor optical amplifiers

  • Sancho Durá, Juan
  • Lloret Soler, Juan Antonio
  • Gasulla Mestre, Ivana|||0000-0001-8088-7796
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Capmany Francoy, José|||0000-0002-6460-4167
[EN] We theoretically and experimentally compare the performance of two fully tunable phase shifter structures based on semiconductor optical amplifiers (SOA) by means of several figures of merit common to microwave photonic systems. A single SOA stage followed by a tailored notch filter is compared with a cascaded implementation comprising three SOA-based phase shifter stages. Attention is focused on the assessment of the RF net gain, noise figure and nonlinear distortion. Recommendations on the performance optimization of this sort of approaches are detailed., The authors wish to acknowledge the financial support of the European Commission Seventh Framework Programme (FP7) project GOSPEL; the GVA PROMETEO 2008/092, the Plan Nacional I + D TEC2011-29120-C05-05 and Infraestructura FEDER UPVOV08-3E-008.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis and characterisation of side chain liquid crystal copolymers containing sulfonic acid groups

  • Martinez Felipe, Alfonso
  • Lu, Zhibao
  • Henderson, Peter A.
  • Picken, Stephen J.
  • Norder, Ben
  • Imrie, Corrie T.
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] A series of novel side chain liquid crystal copolymers, the poly[10-(4-methoxy-4'-oxy-azobenzene) decyl methacrylate]-co-poly[2-acrylamido-2-methyl-1-propanesulfonic acid]s (10-MeOAzB/AMPS-x/y) have been synthesised by free radical copolymerisation. The mol fraction of the sulfonic acid-based group, AMPS, has been varied over a broad range of composition in the copolymers, and these have been characterised using differential scanning calorimetry (DSC), polarised light microscopy (PLM), Fourier Transform Infrared Spectroscopy (FTIR) and X-ray diffraction (XRD). The liquid crystal homopolymer and copolymers containing up to 0.54 mol fraction AMPS-based units, all exhibit a smectic A phase, while at higher mol fraction AMPS-based groups, liquid crystallinity is extinguished and the copolymers are amorphous. The local packing arrangements within the smectic A phase varies with composition attributed, in part, to phase separation between acid rich domains and liquid crystal regions. The dependence of the transitional properties on copolymer composition may be interpreted in terms of the packing efficiency of the mesogenic side chains and hydrogen bonding between the sulfonic acid groups, as a consequence of increasing the concentration of acid-based groups. (c) 2012 Elsevier Ltd. All rights reserved., The authors thank the financial support of the Generalitat Valenciana, through the Grisolia and Forteza programs, and the Spanish Ministry of Science and Innovation, through the Research Projects ENE2007-67584-C03, UPOVCE-3E-013, ENE 2011-28735- CO2-01 and IT-2009-0074 and the awarding of two FPI and FPU predoctoral grants.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Time-frequency analysis of long fiber Bragg gratings with low reflectivity

  • Sancho Durá, Juan
  • Chin, Sanghoon
  • Thevenaz, Luc
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
A new technique to investigate the spatial distribution of the reflection spectrum along fabricated long weak fiber Bragg gratings (FBG) is experimentally demonstrated, together with its potential applications for distributed fiber sensing and broadband signal processing. A short pulsed coherent light signal is launched into a FBG and the signal frequency is scanned through the FBG reflection spectrum. When the pulse duration is set much shorter than the transit time through the grating a time-resolved reflected signal can be obtained for each signal frequency. It informs about the distribution of the refractive index periodic perturbation along the entire FBG length, hence the uniformity or frequency chirp information of the fabricated FBG. This technique has been implemented to demonstrate a distributed temperature sensing system with high spatial resolution and to also realize a robust all-fiber tunable delay line for broadband signals., The authors wish to acknowledge the financial support of the European Commission through the COST Action TD1001 "OFSeSa"; Infraestructura FEDER UPVOV08-3E-008, FEDER UPVOV10-3E-492, Ministerio de Ciencia e Innovacion through the project TEC2011-29120C05-05, the Swiss National Science Foundation through project 200021-134546 and the EPFL Space Center.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Indirect charge transfer of holes via surface states in ZnO nanowires for photoelectrocatalytic applications

  • Batista-Grau, P.
  • Fernández Domene, R. M.
  • Sánchez-Tovar, R.
  • Solsona, B.
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] In this work, ZnO nanowires with high aspect ratio were obtained by fast and simple electrochemical anodization. Morphological, structural and photoelectrochemical characteristics of the synthesized ZnO nanowires were evaluated by using different techniques: field emission scanning electron microscopy, atomic force microscopy, high resolution transmission electron microscopy, Raman spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, UV-VIS spectroscopy, Mott-Schottky analysis and photoelectrochemical impedance spectroscopy. The synthesized ZnO nanowires presented high roughness and high crystallinity. Besides, surface defects were identified in the sample. The value of the donor density (ND) was in the order of 1019 cm-3 in the dark and 1020 cm-3 under illumination. In addition, the ZnO nanowires presented good photosensibility, with a photocurrent density response 85 times higher than a ZnO compact layer, and lower resistance to charge transfer. The charge transfer processes taking place at the ZnO/electrolyte interface were studied, since these processes strongly influence the photoelectrocatalytic efficiency of the material. According to the results, the charge transfer of holes in the synthesized ZnO nanowires occurs indirectly via surface states. In this regard, surface states may be an important feature for photoelectrocatalytic applications since they could provide lower onset voltages and higher anodic current densities., Authors would like to express their gratitude to the Generalitat Valenciana and to the European Social Fund for their financial support within the subvention GJIDI/2018/A/067. Authors also thank to project co-funded by FEDER operational programme 2014-2020 of Comunitat Valenciana (IDIFEDER/18/044). Finally, authors thank to Ministerio de Ciencia e Innovacion-Agencia Estatal de Investigacion (PID2019-105844RB-I00/AEI/10.13039/501100011033) and MINECO for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) co -financed by the European Social Fund. Authors would also like to ex-press their gratitude for the financial support to the Generalitat Valenciana (GV/2021/011). Authors also thanks MINECO for MAT2017-84118-C2-1-R MCIN/AEI/10.13039/501100011033/project and FEDER Una manera de hacer Europa.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization of Functionalized Side-Chain Liquid CrystalMethacrylates Containing Nonmesogenic Units by DielectricSpectroscopy

  • Martinez-Felipe, Alfonso
  • Santonja Blasco, Laura
  • Badia, J.D.
  • Imrie, C.
  • Ribes-Greus, A.
[EN] The dielectric response of a series of side-chain liquid crystal copolymers, SCLCPs, the poly[6-(4'-methoxyazobenzene-4'-oxy)hexyl methacrylate]-co-poly[methyl methacrylate]s, MeOAzB/MMA copolymers, is presented in the frequency range f = 10(-2) to 107 Hz and over the temperature interval T = 150 to 120 degrees C. The relaxation spectra of these polymers have been studied in terms of the complex dielectric permittivity (epsilon' and epsilon '') and the dielectric loss tangent, tan(delta). The electric modulus, M*, has been also calculated. It is possible to distinguish two relaxations zones, one at low temperatures (including gamma and beta relaxations) and another at higher temperatures (including the alpha and beta 1 relaxations), all of them reported for liquid crystalline poly(methacrylate)s. The individual relaxations have been analyzed using Havriliak-Negami (HN) functions, and the effect of conductivity at high temperatures is subtracted. The thermal activation of the relaxations at low temperatures is studied using the Arrhenius equations as a function of copolymer composition, while the alpha and beta 1 relaxations are analyzed using Vogel-Tammann-Fulcher equations. The activation entropy has been also evaluated for all the relaxations through the Eyring equation. The temperature ranges, activation energies, and entropies of the relaxations at low temperatures (gamma and beta) are similar in the homopolymer and copolymers. However, the introduction of MMA units promotes variations in all the parameters related to the relaxations associated with the motions of the ester groups adjoining the polymer backbone. Specifically, a decrease is observed in the activation entropy values of the beta 1 relaxation, which suggests that the activation of the local motions of the side groups involves smaller cooperative regions in the copolymers with respect to the homopolymer. This fact may account for the extinction of the smectic behavior, together with the dilution of the anisotropic interactions between the mesogenic units on increasing MMA content. The study of this beta 1 relaxation can be then applied to anticipate the formation and stability of smectic phases in functionalized SCLCPs, by controlling the local mobility resulting in different mesogenic behavior., This paper is meant to be a tribute and recognition to the research activity of Professor Giulio Sarti. The authors would like to thank Dr. Victor Saenz de Juano for his advice during the discussion of the results and also the Spanish Ministry of Science and Innovation, through the Research Projects ENE2007-67584-C03, UPOVCE-3E-013, IT2009-0074, and ENE2011-28735-C02-01 and two FPI and FPU predoctoral grants, and the financial support of the Generalitat Valenciana, through the Grisolia and Forteza programs and the ACOMP/2011/189 program. UPV is also thanked for additional support through the PAID 05-09-4331 and PAID-06-11 programs.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Integrated InP frequency discriminator for Phase-modulated microwave photonic links

  • Sánchez Fandiño, Javier Antonio
  • Doménech Gómez, José David
  • P. Muñoz|||0000-0001-6026-1649
  • Capmany Francoy, José|||0000-0002-6460-4167
[EN] We report the design, fabrication and characterization of an integrated frequency discriminator on InP technology for microwave photonic phase modulated links. The optical chip is, to the best of our knowledge, the first reported in an active platform and the first to include the optical detectors. The discriminator, designed as a linear filter in intensity, features preliminary SFDR values the range between 67 and 79 dB.Hz2/3 for signal frequencies in the range of 5-9 GHz limited, in principle, by the high value of the optical losses arising from the use of several free space coupling devices in our experimental setup. As discussed, these losses can be readily reduced by the use of integrated spot-size converters improving the SFDR by 17.3 dB (84-96 dB.Hz2/3). Further increase up to a range of (104-116 dB.Hz2/3) is possible by reducing the system noise eliminating the EDFA employed in the setup and using a commercially available laser source providing higher output power and lower relative intensity noise. Other paths for improvement requiring a filter redesign to be linear in the optical field are also discussed., The authors wish to acknowledge the financial support given by the Research Excellency Award Program GVA PROMETEO 2008/092, Spanish MICINN Project TEC2010-21337, acronym ATOMIC; project FEDER UPVOV10-3E-492 and project FEDER UPVOV08-3E008. J.S. Fandiño acknowledges financial support through grant FPU-2010 (ref: AP2010- 1595). J. D. Doménech acknowledges both Beca de Formacion de Personal Investigador (FPI) research grant (ref: BES-2009-018381) and funding from Intel Doctoral Student Honor Programme. The authors are also grateful to the EuroPIC consortium (FP7 funded programme NMP 228839-2) for access to the design manual and design toolkit of the generic InP fab
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Full field model for interleave-chirped arrayed waveguide gratings

  • Gargallo Jaquotot, Bernardo Andrés
  • P. Muñoz|||0000-0001-6026-1649
In this paper, a theoretical model for an Interleave-Chirped Arrayed Waveguide Grating (IC-AWG) is presented. The model describes the operation of the device by means of a field (amplitude and phase) transfer response. The validation of the model is accomplished by means of simulations, using parameters from previously fabricated devices. A novel design procedure is derived from the model, and it is later on employed to demonstrate the design of colorless universal IC-AWGs. The model can be readily applied to the analysis and design of future multi-wavelength optical coherent communications receivers and optical waveform analyzers., The authors acknowledge financial support by the Spanish MICINN Project TEC2010-21337, acronym ATOMIC; project FEDER UPVOV10-3E-492 and project FEDER UPVOV08-3E-008. B. Gargallo acknowledges financial support through FPI grant BES-2011-046100.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Time resolved emission at 1.3 micrometers of a single InAs quantum dot by using a tunable fibre Bragg grating

  • Muñoz Matutano, Guillermo
  • Rivas, David
  • Ricchiuti, Amelia Lavinia
  • Fernández Pousa, Carlos R.
  • Martínez Pastor, J.
  • Seravalli, Luca
  • Trevisi, Giovanna
  • Frigeri, Paola
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] Photoluminescence and time resolved photoluminescence from single metamorphic InAs/GaAs quantum dots (QDs) emitting at 1.3 micrometers have been measured by means of a novel fibre-based characterization set-up. We demonstrate that the use of a wavelength tunable fibre Bragg grating filter increases the light collection efficiency by more than one order of magnitude as compared to a conventional grating monochromator. We identified single charged exciton and neutral biexciton transitions in the framework of a random population model. The QD recombination dynamics under pulsed excitation can be understood under the weak quantum confinement potential limit and the interaction between carriers at the wetting layer and QD states., G Munoz-Matutano appreciates valuable help from Professor Miguel Andres (University of Valencia) and thanks the Spanish Juan de la Cierva program (JCI-2011-10686). We acknowledge the support of the FEDER actions UPVOV08-3E-008 and UPVOV10-3E-492, the PROMETEO2009/74 project from Generalitat Valenciana, the Spanish projects TEC2011-29120-C05-01-02-05, the Italian FIRB Project ‘Nanotecnologie e Nanodispositivi per la Societa` dell’Informazione’ and ‘SANDiE’ Network of Excellence of EC, Contract No. NMP4-CT-2004-500101.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Long Weak FBG Sensor Interrogation Using Microwave Photonics Filtering Technique

  • Lavinia Ricchiuti, Amelia
  • Thevenaz, Luc
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Capmany Francoy, José|||0000-0002-6460-4167
A system to interrogate photonic sensors based on long weak fiber Bragg gratings (FBGs) is illustrated and experimentally demonstrated. The FBG sensor is able to detect and measure the precise location of several spot events. The principle of operation is based on a technique used to analyze microwave photonics filters. The long weak FBGs are used as quasi-distributed sensors. Several events can be detected along the FBG device with a spatial accuracy of <1 mm using a modulator and a photodetector with a modest bandwidth of <500 MHz. The simple proposed scheme is intrinsically robust against environmental changes and easy to reconfigure., This work was supported in part by the COST Action under Grant TD1001 through the OFSeSa Project, in part by the Infraestructura through the Federacion Espanola de Enfermedades Raras Project under Grant UPVOV08-3E-008 and Grant UPVOV10-3E-492, in part by the Spanish Ministerio de Ciencia e Innovacion under Project TEC2011-29120-C05-05, in part by the Valencia Government through the Ayuda Complementaria Project under Grant ACOMP/2013/146, in part by the Research Excellency Award Program GVA PROMETEO under Grant 2013/012, and in part by the Swiss Commission for Technology and Innovation under Project 13122.1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Photoelectrochemical removal of chlorfenvinphos by using WO3 nanorods: Influence of annealing temperature and operation pH

  • Fernández Domene, Ramón Manuel
  • Roselló-Márquez, Gemma
  • Sánchez Tovar, Rita
  • Lucas-Granados, Bianca
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] A visible-light driven photoelectrochemical degradation process has been applied to a solution polluted with the organophosphate insecticide chlorfenvinphos. Different WO3 nanosheets/nanorods have been used as photoanodes. These nanostructured electrodes have been fabricated by anodization of tungsten and, subsequently, they have been subjected to a thermal treatment (annealing). The combined influence of annealing temperature (400¿°C and 600¿°C) and operation pH (1 and 3) on the photoelectrocatalytic behavior of these nanorods has been examined through a statistical analysis. Morphological, structural and photoelectrochemical characterizations have also been carried out. The chlorfenvinphos degradation efficiency depended both on annealing temperature and, specially, operation pH. At pH 1 and using an annealing temperature of 600¿°C, chlorfenvinphos has been effectively degraded following pseudo-first order kinetics with a coefficient of 7.8¿×¿10¿3¿min¿1, and notably mineralized (more than 65% of Total Organic Carbon decrease)., Authors thank for the financial support to the Ministerio de Economia y Competitividad (Project Code: CTQ2016-79203-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the co-finance by the European Social Fund. Ramon M. Fernandez Domene thanks the UPV for the concession of a post-doctoral grant (PAID-10-17) and Gemma Rosello Marquez also thanks the Generalitat Valenciana for the concession of a pre-doctoral grant (ACIF/2018/159)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Novel TiO2-WO3 self-ordered nanotubes used as photoanodes: Influence of Na2WO4 and H2O2 concentration during electrodeposition

  • Sánchez-Tovar, R.
  • Ibáñez-Arlandis, L.
  • Fernández Domene, R. M.
  • Roselló-Márquez, Gemma
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] Hybrid TiO2-WO3 nanostructures has been synthesized by electrochemical anodization under controlled hydrodynamic conditions followed by electrodeposition in the presence of different contents of Na2WO4 (5, 15 and 25 mM) and H2O2 (20, 30 and 40 mM). The influence of the electrolyte used for electrodeposition on the morphology, crystalline structure and photoelectrochemical response for water splitting has been evaluated through Field Emission Electronic Microscopy, High-Resolution Transmission Electron Microscopy, Confocal Raman Spectroscopy, Grazing Incidence X Ray Diffraction, X-Ray Photoelectron Spectroscopy, Atomic Force microscopy and photocurrent versus potential measurements. Additionally, a statistical multi-factor categorical analysis was performed to determine the most significant influential parameters. Results show that hybrid TiO2-WO3 nanostructures formed by simple anodization and subsequent electrodeposition with 30 mM H2O2 and 25 mM Na2WO4 present the highest photocurrent response, 60% higher if compared to TiO2 anodized nanotubes, solving the main problems presented during the usual fabrication of heterostructures, i.e. high temperatures, pressures, number of chemicals and time., Authors thank for the financial support to the Generalitat Valenciana (Project Code: GV/2020/044) as well as to the project co-funded by FEDER operational programme 2014-2020 of Comunitat Valenciana (IDIFEDER/18/044). Authors also thank the Ministerio de Ciencia e Innovacion (Project Code: PID2019-105844RB-I00), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the cofinance by the European Social Fund. Authors also thank Alicia Mestre and Said Agouram from the SCSIE (Universitat de Val`encia) for their help with the XRD and HR-TEM measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Spectroscopic and thermal characterisation of the swelling behaviour of nafion membranes in mixtures of water and methanol

  • Martinez-Felipe, Alfonso
  • Imrie, Corrie Thomas
  • Ribes-Greus, A.|||0000-0003-2460-8291
The spectroscopic and thermal properties of swollen Nafion membranes in methanol aqueous mixtures were investigated to understand the behavior of commercial electrolytes in the presence of polar solvents. Several differences were observed in the absorption processes depending on the composition of the solvent. Deconvolution methods were applied to study specific contributions of solvents and polymer groups based on Fourier transform infrared spectroscopy and thermogravimetric analysis. The results evidence compositional effects on the interactions between solvents and Nafion. A major influence of the nonpolar domains (hydrophobic regions) in the absorption of methanol together with a reduction of the interactions with sulfonate groups was observed. Such changes are accompanied by a modification of the cluster morphology of the equilibrated membranes evaluated by differential scanning calorimetry. These findings can be useful to improve the knowledge on Nafion’s microstructure in the presence of polar solvents, The authors thank the financial support of the Generalitat Valenciana, through the Grisolia and Forteza programs, and the Spanish Ministry of Science and Innovation, through the Research Projects ENE2007-67584-C03, UPOV08-3E-013, IT2009-0074, ENE2011-28735-C02-01 and the awarding of two FPI and FPU predoctoral grants.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Temperature Sensor Based on Colloidal Quantum Dots PMMA Nanocomposite Waveguides

  • Bueno Martínez, Antonio
  • Suárez Álvarez, Isaac
  • Abargues, Rafael
  • J. MARTÍNEZ-PASTOR
  • Sales Maicas, Salvador|||0000-0001-9457-976X
In this paper, integrated temperature sensors based on active nanocomposite planar waveguides are presented. The nanocomposites consist of cadmium selenide (CdSe) and cadmium telluride (CdTe) quantum dots (QDs) embedded in a polymethylmethacrylate (PMMA) matrix. When the samples are heated in a temperature range from 25$^{circ}{rm C}$ to 50 $^{circ}{rm C}$, the waveguided photoluminescence of QDs suffers from a strong intensity decrease, which is approximately quadratic dependent on temperature. Moreover, the wavelength peak of the waveguided emission spectrum of CdTe-PMMA shows a blue shift of 0.25 ${rm nm}/^{circ}{rm C}$, whereas it remains constant in the case of CdSe-PMMA. A temperature resolution of 0.1$^{circ}{rm C}$ is obtained. QD waveguides have great potential for the development of photonic sensors because of their integration, multiplexing, and roll-to-roll fabrication capabilities., Manuscript received February 21, 2012; revised May 8, 2012; accepted July 18, 2012. Date of publication July 24, 2012; date of current version August 9, 2012. This work was supported in part by the Spanish MICINN and Generalitat Valenciana under Grant TEC-2011-06756-C03-03 and Grant PROMETEO/2009/074, the Plan Nacional I + D under Project TEC2011-29120-C05-01 and Project TEC2011-29120-C05-05, and the Infraestructura FEDER UPVOV08-3E-008. The associate editor coordinating the review of this paper and approving it for publication was Prof. E. H. Yang.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Silicon opto-electronic wavelength tracker based on an asymmetric 2x3 Mach-Zehnder Interferometer

  • Doménech Gómez, José David
  • Sánchez Fandiño, Javier Antonio
  • Gargallo Jaquotot, Bernardo Andrés
  • Baños López, Rocío
  • P. Muñoz|||0000-0001-6026-1649
[EN] In this paper we report on the experimental demonstration of a Silicon-on-Insulator opto-electronic wavelength tracker for the optical telecommunication C-band. The device consist of a 2x3 Mach-Zehnder Interferometer (MZI) with 10 pm resolution and photo-detectors integrated on the same chip. The MZI is built interconnecting two Multimode Interference (MMI) couplers with two waveguides whose length difference is 56 mm. The first MMI has a coupling ratio of 95:05 to compensate for the propagation loss difference corresponding to the 56 mm. The wavelength tracker design provides three complementary, with 120◦ phase relations, responses. The MZI optical responses exhibit rejection as good as 15 dB, thanks to asymmetric design for the input coupler. Synchronized recorded DC electronic responses for the three photo-detector outputs reproduce the MZI de-phased characteristic, allowing for monitoring wavelength changes with sign., The authors acknowledge financial support by the Spanish CDTI NEOTEC start-up programme, the Spanish MICINN project TEC2010-21337, acronym ATOMIC, the Spanish MINECO project TEC2013-42332-P, acronym PIC4ESP, project FEDER UPVOV 10-3E-492 and project FEDER UPVOV 08-3E-008. B. Gargallo acknowledges financial support through FPI grant BES-2011-046100. J.S. Fandiño acknowledge financial support through FPU grant AP2010-1595.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis of WO3 nanorods through anodization in the presence of citric acid: Formation mechanism, properties and photoelectrocatalytic performance

  • Fernández-Domene, R. M.
  • Roselló-Márquez, Gemma
  • Sánchez-Tovar, R.
  • Cifre-Herrando, Mireia|||0000-0002-8800-3585
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] In this study, WO3 nanomds have been fabricated by simple anodization in the presence of different amounts of citric acid and at different anodization times. A comprehensive morphological, structural, electrochemical and photoelectrochemical characterization of different samples has been carried out. Moreover, a formation mechanism for WO3 nanorods has been proposed. Finally, these nanostructures have been proven to be excellent visible-light photoelectrocatalysts to remove persistent organic pollutants present in wastewaters, such as fenamiphos. Almost the 80% of this molecule was eliminated from the test solution after 180 min of irradiation, indicating the great potential of these WO3 nanorods, fabricated following a very simple and unexpensive procedure, in the energy and environmental fields as photoelectrocatalysts., Authors thank for the financial support to the Agencia Estatal de Investigacion AEI (PID2019-105844RB-I00/AEI/10.13039/501100011033), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the co-finance by the European Social Fund. Authors also thank the Generalitat Valenciana for the financial support through the subvention GV/2020/044. Finally, Gemma Rosell o Marquez and Mireia Herrando Cifre also thank the Generalitat Valenciana for the concession of two pre-doctoral grants (ACIF/2018/159 and ACIF/2020/229).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Colloidal Quantum Dots-PMMA Waveguides as Integrable Microwave Photonic Phase Shifters

  • Ricchiuti, Amelia L.
  • Suárez Álvarez, Isaac
  • Rodríguez Cantó, Pedro Javier
  • Fernandez-Pousa, Carlos R.
  • Abargues, Rafael
  • Martinez-Pastor, Juan
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Capmany Francoy, José|||0000-0002-6460-4167
A novel scheme for the control of microwave signals carried at optical wavelengths by use of PbS colloidal quantum dots embedded in PMMA waveguides is presented. When these structures are pumped at wavelengths where PbS has efficient absorption (980 or 1310 nm), a phase shift in a signal carried at 1550 nm is induced. Optimal conditions have been analyzed by studying the influence of the microwave signal and the waveguide structure. In a proof-of-concept experiment, a continuous phase shift up to 35° at 25 GHz has been demonstrated, with good thermal stability (<2° at 25 GHz) when the samples are heated 20 °C above room temperature. The potential benefits of the use of this active-waveguide technology in microwave photonics are due to the continuous scan of the phase delay, its high tuning speed, and its small size, which leads to the possibility of integration., This work was supported in part by the Infraestructura FEDER under Grants UPVOV08-3E-008 and FEDER UPVOV10-3E-492, in part by the Research Excellency Award Program GVA PROMETEO 2013/012, Next generation Microwave Photonic Technologies, and in part by the Spanish MCINN under Projects TEC2011-29120-C05-01, TEC2011-29120-C05-02, and TEC2011-29120-C05-05.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Long fiber Bragg grating sensor interrogation using discrete-time microwave photonic filtering techniques

  • Ricchiuti, Amelia Lavinia
  • Thevenaz, Luc
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Capmany Francoy, José|||0000-0002-6460-4167
A novel technique for interrogating photonic sensors based on long fiber Bragg gratings (FBGs) is presented and experimentally demonstrated, dedicated to detect the presence and the precise location of several spot events. The principle of operation is based on a technique used to analyze microwave photonics (MWP) filters. The long FBGs are used as quasi-distributed sensors. Several hot-spots can be detected along the FBG with a spatial accuracy under 0.5 mm using a modulator and a photodetector (PD) with a modest bandwidth of less than 1 GHz. The proposed interrogation system is intrinsically robust against environmental changes., The authors wish to acknowledge the financial support of the Infraestructura FEDER UPVOV08-3E-008, FEDER UPVOV10-3E-492, the Spanish MCINN through the projects TEC2011-29120-C05-05 and TEC2011-29120-C05-01, the Valencia Government through the Ayuda Complementaria ACOMP/2013/146, European Commission through the COST Action TD1001 "OFSeSa" and the Swiss National Science Foundation through project 200021-134546 and the financial support given by the Research Excellency Award Program GVA PROMETEO 2013/012, Next generation Microwave Photonic technologies.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Temperature gradient sensor based on a long-fiber Bragg grating and time-frequency analysis

  • Ricchiuti, Amelia Lavinia
  • Nonaka, Koji
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
A photonic sensor based on a 10-cm-long fiber Bragg grating (FBG) is presented and experimentally validated that is dedicated to detect the presence and the position of a temperature gradient. The system is based on the measurement of the central frequency distribution of the grating based on time-frequency domain analysis. A short optical pulse, having duration much shorter than the transit time along the grating, is coupled into the FBG, and the back-reflected pulse is scanned by means of an oscilloscope. A spatial resolution of 1 mm, given by half the input pulse duration, is achieved. The proposed sensor is based on a simple configuration and presents a sensing range of 10 cm, which could be further enhanced by fabricating a longer grating. (C) 2014 Optical Society of America, The authors wish to acknowledge the Infraestructura FEDER UPVOV08-3E-008, FEDER UPVOV10-3E-492, the Spanish MCINN through the project TEC2011-29120-C05-05, the Valencian Government through the Ayuda Complementaria ACOMP/2013/146 and the financial support given by the Research Excellency Award Program GVA PROMETEO 2013/012.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electrochemical formation of novel TiO2-ZnO hybrid nanostructures for photoelectrochemical water splitting applications

  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Villanueva-Pascual, M.
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] In this study, hybrid ZnO-TiO2 nanostructures have been synthesised by means of a simple electrochemical anodisation of titanium and subsequently ZnO electrodeposition. The influence of Zn(NO3)(2) concentration and temperature during the electrodeposition process was evaluated. Different techniques were used to analyse the synthesised nanostructures, notably Field Emission Scanning Electron Microscopy (FE-SEM) with Energy-dispersive X-ray spectroscopy (EDX) and Confocal Microscopy with Raman spectroscopy coupled with an Atomic Force Microscope. Photoelectrochemical water splitting tests were also performed at the hybrid nanostructures. According to the results, the photoelectrochemical response of the specimens increases with the addition of ZnO, besides the hybrid nanostructures obtained at 25 degrees C and using a Zn(NO3)(2) concentration of 1 mM showed photocurrent densities 80% higher than the ones obtained for TiO2 nanotubes. Analysis of Variance of the data confirms the obtained results., Authors thank for the financial support to the Ministerio de Economía y Competitividad (Project Code: CTQ2016-79203-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the co-finance by the European Social Fund. Authors also thank the Generalitat Valenciana for its financial support through the project: IDIFEDER/018/044 co-finance by the European Social Fund. Authors also thank to the UPV for the concession of a post-doctoral grant (PAID-10-17) to Ramón M. Fernández Domene.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A methodology to assess the energetic valorization of bio-based polymers from the packaging industry: pyrolysis of reprocessed polylactide

  • Badía Valiente, José David
  • Santonja Blasco, Laura
  • Martinez-Felipe, Alfonso
  • Ribes-Greus, A.|||0000-0003-2460-8291
The energetic valorization process of bio-based polymers is addressed in this study, taking polylactide (PLA) as model. The pyrolysis of virgin and multiple-injected PLA was simulated by means of multi-rate linear-non-isothermal thermogravimetric experiments. A complete methodology, involving control of gases, thermal stability and thermal decomposition kinetics was proposed. The release of gases was monitored by Evolved Gas Analysis of the fumes of pyrolysis, by in-line FT-IR, with the aid of 2D-correlation IR characterization. A novel model to establish the thermal stability of PLAs under any linear heating profile was proposed. A kinetic strategy was methodically applied to assess the thermal decomposition in terms of activation energy and kinetic model. It was found that the pyrolysis technologies for virgin PLA could be straightforwardly transferred for the valorization of its recyclates., The authors would like to acknowledge the Spanish Ministry of Science and Innovation for the financial support through the Research Projects ENE2007-67584-C03, UPOVCE-3E-013, ENE2011-28735-C02-01, IT-2009-0074, as well as for the pre-doctoral research position for L. Santonja-Blasco through the FPI program. The Spanish Ministry for Education is acknowledged for the concession of a pre-doctoral research position to J.D. Badia and A. Martinez-Felipe by means of the FPU program. The authors thank the financial support of the Generalitat Valenciana through the ACOMP/2011/189, the Grisolia research position for A. Martinez-Felipe, and for the Forteza technician position for J.D. Badia. Universitat Politecnica de Valencia (UPV, Spain) is thanked for additional support through the PAID 05-09-4331 and PAID 06-11-2037 projects. AIMPLAS is acknowledged for providing and processing the material. This paper is warmly dedicated to Gael Badia-Ombuena, in commemoration of his birth.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ionically conducting and photoresponsive liquid crystalline terpolymers: Towards multifunctional polymer electrolytes

  • Vanti, L.
  • Alauddin, S. Mohd
  • Zaton, D.
  • Aripin, N.F.K.
  • Giaccinti-Baschetti, M.
  • Imrie, C.T.
  • Martinez-Felipe, A.
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] We have prepared a series of new ionically conducting polymer electrolytes consisting of side-chain liquid crystal terpolymers with mesogenic azobenzenes, sulfonic acid groups and methyl methacrylate. The poly[10-(4-methoxyazobenzene -4'-oxy)decyl methacrylate] -co-poly[2-acrylamido-2-methyl-1-propanesulfonic acid]-copoly [methyl methacrylate]s, 10-MeOAzB/AMPS/MMA terpolymers, were synthesised by a one-pot conventional radical polymerisation. All samples were characterised by NMR, GPC/SEC, FT-IR, POM, XRD, DSC, UV-visible spectrophotometry and EIS. The terpolymers have light responsive properties, and exhibit liquid crystallinity over a wide range of compositions. Above a certain threshold of AMPS content, the 10-MeOAzB/AMPS/MMA terpolymers exhibit ionic conductivities in the 10(-8)-10(-4)S.cm(-1) range, with signs of decoupling of ionic mobility from segmental motions of the polymer., ARG and AMF thank the financial support of the Generalitat Valenciana, through the Grisolia and Forteza programs, and the Spanish Ministry of Science and Innovation, through the Research Projects ENE2007-67584-C03 and UPOVCE-3E-013 and the awarding of two FPI and FPU pre-doctoral grants. AMF and NFKA would like to thank the Royal Academy of Engineering for the award of the Newton Research Collaboration Programme grant NRCP1516/4/61. AMF acknowledges the School of Engineering of the University of Aberdeen for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The role of crystalline, mobile amorphous and rigid amorphous fractions in the performance of recycled poly (ethylene terephthalate) (PET)

  • Badia, J.D.
  • Strömberg, Emma
  • Karlsson, Sigbritt
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] The action of thermo-mechanical degradation induced by mechanical recycling of poly(ethylene terephthalate) was simulated by successive injection moulding cycles. Degradation reactions provoked chain scissions and a reduction in molar mass mainly driven by the reduction of diethyleneglycol to ethylene glycol units in the flexible domain of the PET backbone, and the formation of -OH terminated species with shorter chain length. The consequent microstructural changes were quantified taking into account a three-fraction model involving crystalline, mobile amorphous (MAF) and rigid amorphous fractions (RAF). A remarkable increase of RAF, to a detriment of MAF was observed, while the percentage of crystalline fraction remained nearly constant. A deeper analysis of the melting behaviour, the segmental dynamics around the glass-rubber relaxation, and the macroscopic mechanical performance, showed the role of each fraction leading to a loss of thermal, viscoelastic and mechanical features, particularly remarkable after the first processing cycle. © 2011 Elsevier Ltd. All rights reserved., The authors would like to acknowledge the Spanish Ministry of Science and Innovation for the financial support through the Research Project UPOVCE-3E-013 and for the funding of a pre-doctoral research position to J.D. Badía by means of the FPU program conceded by the Spanish Ministry for Education. Catalana de Polimers, S.A. and AIMPLAS are acknowledged for providing and processing the material, respectively. Mr. Peter Kaali is thanked for carrying out impact tests and Mrs. Sevil Atari Jabarzadeh for helping with SEM analysis. The authors thank the financial support of the Generalitat Valenciana through the ACOMP/2011/189 and the Gerónimo Forteza grant to J.D. Badía. Universitat Politècnica de València (UPV, Spain) is thanked for additional support through the PAID 05-09-4331 program and Royal Institute of Technology (KTH, Sweden) is thanked for additional economical support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Degradation of Methylparaben Using Optimal WO3 Nanostructures: Influence of the Annealing Conditions and Complexing Agent

  • Cifre-Herrando, Mireia|||0000-0002-8800-3585
  • García-García, D.M.|||0000-0001-8951-4558
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Roselló-Márquez, Gemma
[EN] In this work, WO3 nanostructures were synthesized with different complexing agents (0.05 M H2O2 and 0.1 M citric acid) and annealing conditions (400 degrees C, 500 degrees C and 600 degrees C) to obtain optimal WO3 nanostructures to use them as a photoanode in the photoelectrochemical (PEC) degradation of an endocrine disruptor chemical. These nanostructures were studied morphologically by a field emission scanning electron microscope. X-ray photoelectron spectroscopy was performed to provide information of the electronic states of the nanostructures. The crystallinity of the samples was observed by a confocal Raman laser microscope and X-ray diffraction. Furthermore, photoelectrochemical measurements (photostability, photoelectrochemical impedance spectroscopy, Mott-Schottky and water-splitting test) were also performed using a solar simulator with AM 1.5 conditions at 100 mW center dot cm(-2). Once the optimal nanostructure was obtained (citric acid 0.01 M at an annealing temperature of 600 degrees C), the PEC degradation of methylparaben (C-O 10 ppm) was carried out. It was followed by ultra-high-performance liquid chromatography and mass spectrometry, which allowed to obtain the concentration of the contaminant during degradation and the identification of degradation intermediates. The optimized nanostructure was proved to be an efficient photocatalyst since the degradation of methylparaben was performed in less than 4 h and the kinetic coefficient of degradation was 0.02 min(-1)., Authors would like to express their gratitude for the financial support to the Ministerio de Ciencia e Innovacion (Project code: PID2019-105844RB-I00/AEI/10.13039/501100011033) in the acquisition of Laser Raman Microscope (UPOV08-3E-012). M. Cifre-Herrando thanks Ministerio de Universidades for the concession of the predoctoral grant (FPU19/02466) and Gemma Rosello-Marquez also thanks the UPV for the concession of a post-doctoral grant (PAID-10-21). Finally, authors wish to thank to project co-funded by FEDER operational programme 2014-2020 of Comunitat Valenciana (IDIFEDER/18/044) for the financial funding.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

UWB Doublet Generation Employing Cross-Phase Modulation in a Semiconductor Optical Amplifier Mach Zehnder Interferometer

  • Moreno, Vanessa
  • Rius Mercado, Manuel
  • Muriel, M.A.
  • Mora Almerich, José|||0000-0002-2877-4118
  • Capmany Francoy, José|||0000-0002-6460-4167
In this paper, a novel method to generate ultrawideband (UWB) doublets is proposed and experimentally demonstrated, which is based on exploiting the cross-phase modulation in a semiconductor optical amplifier (SOA). The key component is an integrated SOA Mach-Zehnder interferometer pumped with an optical carrier modulated by a Gaussian pulse. The transfer function of the nonlinear conversion process leads to the generation of UWB doublet pulses by tuning the SOA currents to different values., This work was supported in part by national projects TEC2010-21303-C04-02 and TEC2011-26642 under the responsibility of the Ministerio de Economia y Competitividad, by projects FEDER UPVOV08-3E-008 and UPVOV10-3E-492, and by the Generalitat Valenciana under the Research Excellency Award Program GVA PROMETEO 2013/012 Next Generation Microwave Photonic technologies. Corresponding author: J. Mora (e-mail: jmalmer@iteam.upv.es).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electro-refraction modulation predictions for silicon graphene waveguides in the 1540-1560 nm region

  • Pérez-López, Daniel
  • Doménech Gómez, José David
  • P. Muñoz|||0000-0001-6026-1649
  • Capmany Francoy, José|||0000-0002-6460-4167
We derive analytical approximations for the variation of the effective indices of the fundamental transverse electric (TE) and transverse magnetic (TM) modes with the chemical potential of graphene in three common types of silicon graphene waveguides. In all cases, a third-order polynomial provides an excellent degree of approximation (<; 10-4) over the 1540-1560 nm wavelength band. The approximations can be useful in the design of complex-integrated photonic circuits where graphene is employed to tune the refractive of the dielectric waveguides., This work was supported in part by the Research Excellency Award Program GVA PROMETEO II/2013/012; in part by Spanish MINECO projects TEC2013-42332-P PIF4ESP, TEC2015-69787-REDT PIC4TB, and TEC2014-60378-C2-1-R MEMES; and in part by projects FEDER UPVOV 10-3E-492 and FEDER UPVOV 08-3E-008. The work of D. Perez was supported by the FPI-UPV Grant Program from the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Controlled hydrodynamic conditions on the formation of iron oxide nanostructures synthesized by electrochemical anodization: Effect of the electrode rotation speed

  • Lucas-Granados, Bianca
  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] Iron oxide nanostructures are of particular interest because they can be used as photocatalysts in water splitting due to their advantageous properties. Electrochemical anodization is one of the best techniques to synthesize nanostructures directly on the metal substrate (direct back contact). In the present study, a novel methodology consisting of the anodization of iron under hydrodynamic conditions is carried out in order to obtain mainly hematite (alpha-Fe2O3) nanostructures to be used as photocatalysts for photoelectrochemical water splitting applications. Different rotation speeds were studied with the aim of evaluating the obtained nanostructures and determining the most attractive operational conditions. The synthesized nanostructures were characterized by means of Raman spectroscopy, Field Emission Scanning Electron Microscopy, photoelectrochemical water splitting, stability against photocorrosion tests, Mott-Schottky analysis,. Electrochemical Impedance Spectroscopy (EIS) and band gap measurements. The results showed that the highest photocurrent densities for photoelectrochemical water splitting were achieved for the nanostructure synthesized at 1000 rpm which corresponds to a nanotubular structure reaching similar to 0.130 mA cm(-2) at 0.54V (vs. Ag/AgCl). This is in agreement with the EIS measurements and Mott-Schottky analysis which showed the lowest resistances and the corresponding donor density values, respectively, for the nanostructure anodized at 1000 rpm., The authors would like to express their gratitude for the financial support to the Ministerio de Economia y Competitividad (Reference: BES-2014-068713, Project Code: CTQ2013-42494-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012), for the co-finance by the European Social Fund and to Dr. Asuncion Jaime for her translation assistance
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Liquid crystal polymers and ionomers for membrane applications

  • Martinez-Felipe, Alfonso
[EN] Transport phenomena through polymeric composite membranes depend on several complex factors, involving not only their chemical composition but also their microstructure. Due to the combination of mesomorphic and macromolecular behaviour, thermotropic liquid crystal polymers (LCP) may enhance the transport properties in membranes by improving parameters related to the order, orientation, connectivity and distribution of the different domains arising from phase separation. This paper provides an overview of some existing and potential applications of liquid crystals (LC) in polymeric membranes as effective structure-directing templates or as components providing a dynamic response to external stimuli. The first part is a description of the composition and phase behaviour of LCP containing ionic and ionogenic groups, the so-called liquid crystal ionomers (LCI). The second part is focused on the description of LCP and LCI used in transport applications, such as proton-conducting films in fuel cells, ionic polymer transducers and hydrogels. The paper highlights the relationships between the composition and the LC properties of the materials and their potential as membranes for ionic and solvent transport, with particular attention paid to covalently linked materials prepared by copolymerisation, due to their higher versatility and stability., The author would like to especially thank Professor Amparo Ribes-Greus, from Universitat Politecnica de Valencia, UPV, and Professor Corrie T. Imrie, from the University of Aberdeen, UoA, for their support during the discussion of this work, and also the researchers and students from the research group of Degradation and Recycling of Polymeric Materials in the Institute of Materials Technology (ITM) of UPV. Also acknowledged for their financial support are the Spanish Ministry of Science and Innovation, through the Research Projects ENE2007-67584-C03 and UPOVCE-3E-013, the Ministry of Education and Science for the awarding of two FPU and FPI pre-doctoral grants, and the financial support of the Generalitat Valenciana, through the Grisolia and the ACOMP/2011/189 program. The UPV is also thanked for additional support through the PAID 05-09-4331 programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Formation of ZnO nanowires by anodization under hydrodynamic conditions for photoelectrochemical water splitting

  • Batista-Grau, Patricia
  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] The present work studies the influence of hydrodynamic conditions (from 0 to 5000 rpm) during Zn anodization process on the morphology, structure and photoelectrocatalytic behavior of ZnO nanostructures. For this purpose, analysis with Confocal Laser-Raman Spectroscopy, Field Emission Scanning Electron Microscope (FE-SEM) and photoelectrochemical water splitting tests were performed. This investigation reveals that hydrodynamic conditions during anodization promoted the formation of ordered ZnO nanowires along the surface that greatly enhance its stability and increases the photocurrent density response for water splitting in a 159% at the 5000 rpm electrode rotation speed., Authors would like to express their gratitude for the financial support to the Generalitat Valenciana and to the European Social Fund within the subvention to improve formation and employability of technical and management staff of I + D (GJIDI/2018/A/) and for its financial support through the project: IDIFEDER/018/044. Authors also thank for the financial support to the Ministerio de Economia y Competitividad (Project Code: CTQ2016-79203-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the cofinance by the European Social Fund. Ramon M. Fernandez Domene also thanks the UPV for the concession of a post-doctoral grant (PAID-10-17).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Microwave photonics filtering technique for interrogating a very-weak fiber Bragg grating cascade sensor

  • Ricchiuti, Amelia Lavinia
  • Hervás Peralta, Javier
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Capmany Francoy, José|||0000-0002-6460-4167
A system to interrogate photonic sensors based on a very weak fiber Bragg grating cascade fiber is presented and experimentally validated and dedicated to detecting the presence and location of a spot event. The distributed sensor proposed consists of a 5-m-long fiber, containing 500 9-mm-long Bragg gratings with a grating separation of 10.21 mm. The principle of operation is based on a technique used to analyze microwave photonics filters. The detection of spot events along the sensor is demonstrated with remarkable accuracy under 1 mm, using a photodetector and a modulator with a bandwidth of only 500 MHz. The simple proposed scheme is intrinsically robust against environmental changes and is easy to reconfigure., This work was supported in part by the Infraestructura FEDER UPVOV08-3E-008, by FEDER UPVOV10-3E-492, by the Spanish MCINN through Project TEC2011-29120-C05-05, by the Valencia Government through Ayuda Complementaria ACOMP/2013/146, by the grant of the program SANTIAGO GRISOLIA, and by the Research Excellency Award Program GVA PROMETEO 2013/012.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization of thermal oxide films formed on a duplex stainless steel by means of confocal-Raman microscopy and electrochemical techniques

  • Sánchez Tovar, Rita
  • Leiva García, Rafael
  • Garcia-Anton, Jose|||0000-0002-0289-1324
In this work oxide films have been developed on the surface of a duplex stainless steel (UNS 1.4462) using high temperature confocal microscopy to follow their growth. The characteristics of these oxide films have been analyzed by means of weight-gain measurements, Raman microscopy and electrochemical techniques, namely potentiodynamic polarization curves and electrochemical impedance spectroscopy. The results show an increase in the amount of oxides (particularly γ-Fe2O3 and Fe3O4) with temperature. Regarding the electrochemical properties of these films, the corrosion resistance of the film tends to be lower with the heat treatment temperature, probably due to a more porous and heterogeneous scale. Mott–Schottky plots show the n-type semiconductive behavior of the films with donor densities that decrease with the enhancement of the temperature., We wish to express our gratitude to MICINN (CTQ2009-07518) (UPVO8-3E-012), to Universitat Politecnica de Valencia (CEI-01-11), to the Generalitat Valenciana for its help in the CLSM acquisition (MY08/ISIRM/S/100), and to Dr. Asuncion Jaime for her translation assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of Reynolds number and lithium cation insertion on titanium anodization

  • Borràs-Ferrís, Joan
  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Garcia-Anton, Jose|||0000-0002-0289-1324
This work studies the influence of using hydrodynamic conditions (Reynolds number, Re = 0 to Re = 600) during Ti anodization and Li+ intercalation on anatase TiO2 nanotubes. The synthesized photocatalysts were characterized by using Field Emission Scanning Electron Microscope (FE-SEM), Raman Confocal Laser Microscopy, Electrochemical Impedance Spectroscopy (EIS), Mott-Schottky analysis (M-S), photoelectrochemical hydrogen production and resistance to photocorrosion tests. The obtained results showed that the conductivity of the NTs increases with Li+ intercalation and Re. The latter is due to the fact that the hydrodynamic conditions eliminate part of the initiation layer formed over the tube-tops, which is related to an increase of the photocurrent in the photoelectrochemical water splitting. Besides, the photogenerated electron-hole pairs are facilitated by Li+ intercalation. Finally, this work confirms that there is a synergistic effect between Re and Li+ intercalation., The authors would like to express their gratitude for the financial support to the Ministerio de Economia y Competitividad (CTQ2013-42494-R), for its help in the Laser Raman Microscope acquisition (UPOVO8-3E-012), and for the co-finance by the European Social Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Arbitrary Coupling Ratio Multimode Interference Couplers in Silicon-on-Insulator

  • Doménech Gómez, José David
  • Sánchez Fandiño, Javier Antonio
  • Gargallo Jaquotot, Bernardo Andrés
  • P. Muñoz|||0000-0001-6026-1649
In this paper, we present the design, manufacturing, characterization, and analysis of the coupling ratio spectral response for multimode interference couplers in silicon-on-insulator (SOI) technology. The couplers were designed using a Si rib waveguide with SiO2 cladding, on a regular 220 nm film and 2 μm buried oxide SOI wafer. A set of eight different designs, three canonical and five using a widened/narrowed coupler body, have been subject of study, with coupling ratios 50:50, 85:15, and 72:28 for the former, and 95:05, 85:15, 75:25, 65:35, and 55:45 for the latter. Two wafers of devices were fabricated, using two different etch depths for the rib waveguides. A set of six dies, three per wafer, whose line metrology matched the design, were retained for characterization. The coupling ratios obtained in the experimental results match, with little deviations, the design targets for a wavelength range between 1525 and 1575 nm, as inferred from spectral measurements and statistical analyses. Excess loss for all the devices is conservatively estimated to be approximately 0.6 dB in average. All the design parameters, body width and length, input/output positions and widths, and tapers dimensions are disclosed for reference., This work was supported by the Spanish CDTI NEOTEC start-up program, the Spanish MICINN project TEC2010-21337, acronym ATOMIC, the Spanish MINECO project TEC2013-42332-P, acronym PIC4ESP, project FEDER UPVOV 10-3E-492, and project FEDER UPVOV 08-3E-008. The work of B. Gargallo was supported by FPI under Grant BES-2011-046100. The work of J.S. Fandino was supported by FPU under grant AP2010-1595.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Material valorisation of amorphous polylactide. Influence of thermo-mechanical degradation on the morphology, segmental dynamics, thermal and mechanical performance

  • Badía Valiente, José David
  • Strömberg, Emma
  • Karlsson, Sigbritt
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] This paper reports the effects of multiple mechanical recycling on the structure and properties of amorphous polylactide (PLA). The influence of the thermo-mechanical degradation induced by means of five successive injection cycles was initially addressed in terms of macroscopic mechanical properties and surface modification. A deeper inspection on the structure and morphology of PLA was associated to the thermal properties and viscoelastic behaviour. Although FT-IR analysis did not show significant changes in functional groups, a remarkable reduction in molar mass was found by viscometry. PLA remained amorphous throughout the reprocessing cycles, but the occurrence of a cold-crystallization during DSC and DMTA measurements, which enthalpy increased with each reprocessing step, suggested chain scission due to thermo-mechanical degradation. The effect of chain shortening on the glass-rubber relaxation studied by DMTA showed an increase in free volume affecting the segmental dynamics of PLA, particularly after the application of the second reprocessing step, in connection to the overall loss of performance showed by the remaining properties. © 2012 Elsevier Ltd. All rights reserved., The authors would like to acknowledge the Spanish Ministry of Science and Innovation for the financial support through the Research Project UPOVCE-3E-013 and for the funding of a predoctoral research position to J.D. Badia by means of the FPU program conceded by the Spanish Ministry for Education. The authors acknowledge the financial support of the Generalitat Valenciana through the ACOMP/2011/189. Universitat Politecnica de Valencia (UPV, Spain) is thanked for additional support through the PAID 05-09-4331 program and Royal institute of Technology (KTH, Sweden) is thanked for additional. Mr. Enrique Benavent at AIMPLAS is acknowledged for taking care of processing the material. Mr. Peter Kaali at KTH is thanked for carrying out impact tests and Mrs. Sevil Atari Jabarzadeh at KTH for helping with SEM analysis. Mrs. L. Santonja-Blasco at UPV is thanked for endless and enjoyable discussions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Scalable High-Order UWB Pulse Generation Employing an FBG-Based Photonic Superstructure

  • Moreno, V.
  • Muriel, M.A.
  • Mora Almerich, José|||0000-0002-2877-4118
  • Capmany Francoy, José|||0000-0002-6460-4167
In this letter, we propose and experimentally demonstrate a compact, flexible, and scalable ultrawideband (UWB) generator based on the merge of phase-to-intensity conversion and pulse shaping employing an fiber Bragg Grating-based superstructure. Our approach offers the capacity for generating high-order UWB pulses by means of the combination of various low-order derivatives. Moreover, the scheme permits the implementation of binary and multilevel modulation formats. Experimental measurements of the generated UWB pulses, in both time and frequency domain, are presented revealing efficiency and a proper fit in terms of Federal Communications Commission settled standards., This work was supported in part by the National Project under Grant TEC2010-21303-C04-02, Grant TEC2011-26642, and Grant TEC2014-58048-C2-2-P through the Ministerio de Economia y Competitividad and in part by the Fondo Europeo de Desarrollo Regional under Project UPVOV08-3E-008.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Reprocessed polylactide: Studies of thermo-oxidative decomposition

  • Badía Valiente, José David
  • Santonja Blasco, Laura
  • Martinez-Felipe, Alfonso
  • Ribes-Greus, A.|||0000-0003-2460-8291
The combustion process of virgin and reprocessed polylactide (PLA) was simulated by multi-rate linear non-isothermal thermogravimetric experiments under O2. A complete methodology that accounted on the thermal stability and emission of gases was thoroughly developed. A new model, Thermal Decomposition Behavior, and novel parameters, the Zero-Decomposition Temperatures, were used to test the thermal stability of the materials under any linear heating rate. The release of gases was monitored by Evolved Gas Analysis with in-line FT-IR analysis. In addition, a kinetic analysis methodology that accounted for variable activation parameters showed that the decomposition process could be driven by the formation of bubbles in the melt. It was found that the combustion technologies for virgin PLA could be transferred for the energetic valorization of its recyclates. Combustion was pointed out as appropriate for the energetic valorization of PLA submitted to more than three successive reprocessing cycles, The authors would like to acknowledge the Spanish Ministry of Science and Innovation for the financial support through the Research Projects ENE2007-67584-C03, UPOVCE-3E-013, ENE2011-28735-C02-01, IT-2009-0074, as well as for the pre-doctoral research position for L. Santonja-Blasco through the FPI program. The Spanish Ministry for Education is acknowledged for the concession of a pre-doctoral research position to J.D. Badia and A. Martinez-Felipe by means of the FPU program. The authors thank the financial support of the Generalitat Valenciana through the ACOMP/2011/189, the Grisolia research position for A. Martinez-Felipe, and for the Forteza technician position. Universitat Politecnica de Valencia (UPV, Spain) is thanked for additional support through the PAID 05-09-4331 and PAID 06-11-2037 projects. AIMPLAS (Technological Institute of Plastic) is acknowledged for providing and processing the material.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analysis of System Imperfections in a Photonics-Assisted Instantaneous Frequency Measurement Receiver Based on a Dual-Sideband Suppressed-Carrier Modulation

  • Sánchez Fandiño, Javier Antonio
  • P. Muñoz|||0000-0001-6026-1649
[EN] Instantaneous frequency measurement receivers are a well-established technology that is used for the ultrafast characterization of pulsed microwave signals over a broad bandwidth. Recently, numerous photonic approaches to instantaneous frequency measurement (IFM) have been proposed and experimentally demonstrated, with the ultimate aim of leveraging the benefits of optical technology to improve the performance of already existent electronic solutions. Despite the numerous results, not so much attention has been paid so far to understand the subtle implications that system imperfections can have on realistic photonics-based IFM receivers. Here, we focus our attention on one of the most promising among these IFM techniques, which is based on optical power monitoring of a dual-sideband suppressed-carrier modulation after a Mach Zehnder interferometer (MZI) filter. We develop a time-domain model for the rigorous analysis of all major optical and electrical effects, including amplitude imbalance and phase errors in the modulator and the MZI, as well as on-pulse RF phase/frequency modulation. Simulations are then used to illustrate the substantial effect that a nonperfectly suppressed optical carrier can have on system performance. More importantly, it is shown that in a nonideal situation, the system amplitude comparison function critically depends on input RF power, thus greatly limiting the dynamic range of the photonics-based receiver. Some approaches to solve these issues are also discussed., This work was supported by projects TEC2010-21337 (ATOMIC), FEDER UPVOV10-3E-492, FEDER UPVOV08-3E-008, TEC2013-42332-P (PIC4ESP), and PROMETEO 2013/012. The work of J. S. Fandino was supported by Grant FPU-2010 (ref: AP2010-1595).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Photoelectrocatalyzed degradation of organophosphorus pesticide fenamiphos using WO3 nanorods as photoanode

  • Roselló-Márquez, Gemma
  • Fernández Domene, Ramón Manuel
  • Sánchez Tovar, Rita
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] In this study, WO3 nanostructures were synthesized by the electrochemical anodization technique to use them on the degradation of persistent organic compounds such as the pesticide fenamiphos. The acids electrolyte used during the anodization were two different: 1.5 M H2SO4-0.05 M H2O2 and 1.5 M CH4O3S-0.05 M H2O2. Once the samples have been manufactured, they have been subjected to different tests to analyze the properties of the nanostructures. With Field Emission Scanning Electron Microscopy (FESEM) the samples have been examined morphologically, their composition and crystallinity has been studied through Raman Spectroscopy and their photoelectrochemical behaviour by Photoelectrochemical Impedance Spectroscopy (PEIS). Finally, degradation tests have been carried out using the technique known as photoelectrocatalysis (PEC). The conditions that were applied in this technique were a potential of 1 V-Ag/AgCI and simulated solar illumination. The degradation process was monitored by UV-Visible and High-Performance liquid Chromatography (HPLC) to control the course of the experiment. The nanostructures obtained with 1.5 M CH4O3S-0.05 M H2O2 electrolyte showed a better photoelectrochemical behaviour than nanostructures synthesized with 1.5 M H2SO4-0.05 M H2O2. The fenamiphos degradation was achieved at 2 h of experiment and the intermediate formation was noticed at 1 h of PEC experiment., Authors thank for the financial support to the Ministerio de Economia y Competitividad (Project Code: CTQ2016-79203-R; for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the co-finance by the European Social Fund). Authors would also like to thank the Ministerio de Ciencia, Innovacion y Universidades (Project Code: CTQ2017-90659-REDT) and the Generalitat Valenciana for its help in the Atomic Force Microscope acquisition (IDIFEDER/2018/044). Ramon M. Fernandez Domene also thanks the UPV for the concession of a post-doctoral grant (PAID-10-17) and Gemma Rosello Marquez also thanks the Generalitat Valenciana for the concession of a pre-doctoral grant (ACIF/2018/159).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Harmonic distortion in microwave photonic filters

  • Rius Mercado, Manuel
  • Bolea Boluda, Mario
  • Mora Almerich, José|||0000-0002-2877-4118
  • Capmany Francoy, José|||0000-0002-6460-4167
We present a theoretical and experimental analysis of nonlinear microwave photonic filters. Far from the conventional condition of low modulation index commonly used to neglect high-order terms, we have analyzed the harmonic distortion involved in microwave photonic structures with periodic and non-periodic frequency responses. We show that it is possible to design microwave photonic filters with reduced harmonic distortion and high linearity even under large signal operation. © 2012 Optical Society of America., The authors wish to acknowledge the financial support given by the Research Excellency Award Program GVA PROMETEO 2008/09 and the FEDER Program "Instrumentacion Avanzada para Comunicaciones Opticas" with reference UPVOV08-3E-008.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A high-temperature fiber sensor using a low cost interrogation scheme

  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
Regenerated Fibre Bragg Gratings have the potential for high-temperature monitoring. In this paper, the inscription of Fibre Bragg Gratings (FBGs) and the later regeneration process to obtain Regenerated Fiber Bragg Gratings (RFBGs) in high-birefringence optical fiber is reported. The obtained RFBGs show two Bragg resonances corresponding to the slow and fast axis that are characterized in temperature terms. As the temperature increases the separation between the two Bragg resonances is reduced, which can be used for low cost interrogation. The proposed interrogation setup is based in the use of optical filters in order to convert the wavelength shift of each of the Bragg resonances into optical power changes. The design of the optical filters is also studied in this article. In first place, the ideal filter is calculated using a recursive method and defining the boundary conditions. This ideal filter linearizes the output of the interrogation setup but is limited by the large wavelength shift of the RFBG with temperature and the maximum attenuation. The response of modal interferometers as optical filters is also analyzed. They can be easily tuned shifting the optical spectrum. The output of the proposed interrogation scheme is simulated in these conditions improving the sensitivity., The authors wish to acknowledge the financial support of the Infraestructura FEDER UPVOV08-3E-008, FEDER UPVOV10-3E-492, the Spanish MCINN through the project TEC2011-29120-C05-05 and the Valencia Government through the Ayuda Complementaria ACOMP/2013/146. The authors also acknowledge the collaboration of Alvarez from Fibercore for providing the high birefringence optical fiber.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Photonics-based microwave frequency measurement using a double-sideband suppressed-carrier modulation and an InP integrated ring-assisted Mach Zehnder interferometer filter

  • Sánchez Fandiño, Javier Antonio
  • P. Muñoz|||0000-0001-6026-1649
[EN] A photonic system capable of estimating the unknown frequency of a CW microwave tone is presented. The core of the system is a complementary optical filter monolithically integrated in InP, consisting of a ring-assisted Mach-Zehnder interferometer with a second-order elliptic response. By simultaneously measuring the different optical powers produced by a double-sideband suppressed-carrier modulation at the outputs of the photonic integrated circuit, an amplitude comparison function that depends on the input tone frequency is obtained. Using this technique, a frequency measurement range of 10 GHz (5-15 GHz) with a root mean square value of frequency error lower than 200 MHz is experimentally demonstrated. Moreover, simulations showing the impact of a residual optical carrier on system performance are also provided. (C) 2013 Optical Society of America, This work was supported by projects TEC2010-21337 (ATOMIC), FEDER UPVOV10-3E-492, and UPVOV08-3E-008. J. S. Fandino was supported by grant FPU-2010 (ref: AP2010-1595). The authors acknowledge the use of Phoenix Software tools for design of the InP PIC, which was manufactured within the EuroPIC FP7 project (ref: NMP 228839-2).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Comportamiento frente a la oxidación de aleaciones de titanio alfa + beta

  • Vicente-Escuder, Ángel|||0000-0001-8425-3424
  • Amigó, Vicente|||0000-0002-2107-0273
  • Schalht, A.
  • Amigó Mata, Angèlica
[EN] Las aleaciones alfa+beta, presentan excelentes propiedades mecánicas y frente a la corrosión lo que las hace excelentes candidatas para su aplicación en la industria química y aeronáutica, pero es importante mejorar su comportamiento frente a elevadas temperaturas, sobre todo su oxidación a esas temperaturas. En el presente trabajo se estudia la obtención de aleaciones &#61537;+&#61538; del tipo Ti-3%at. X (Nb, Mo, Ta) por vía pulvimetalúrgica a partir de mezcla elemental de polvos y su caracterización microestructural, con análisis específico de su resistencia a la oxidación a elevadas temperaturas. La microestructura se caracteriza mediante microscopía óptica y electrónica. La resistencia mecánica de las aleaciones se obtiene mediante ensayos de flexión y análisis fractográfico. La resistencia frente a la oxidación se ha determinado mediante una termobalanza Q50 de TA Instruments a 900º durante 200 minutos. Los mecanismos de corrosión se han analizado a través de sus óxidos superficiales, caracterizados mediante microscopía electrónica de barrido (SEM) y microscopía de fuerza atómica (AFM). Todas las aleaciones investigadas presentan estructura &#61537;+&#61538; con densidades entre el 90 y 94%. Además, presentan elevada resistencia a flexión, alrededor de los 1750-1800 MPa de carga de rotura, y elevada dureza; con una resistencia a la oxidación sensiblemente mayor que la correspondiente al titanio puro comercial. La difracción de rayos-X (XRD) y espectroscopia Raman confirman la formación de óxidos de titanio como fase principal. En conclusión la adición de los elementos de aleación aumenta en dos veces su resistencia frente a la oxidación a elevadas temperaturas., Los autores agradecen al MINECO la financiación del proyecto de investigación bilateral con Brasil PIB2010BZ-00448, a la UE por la financiación FEDER UPOV08-3E-005 para la compra de equipamiento y a la Generalitat Valenciana por la ayuda ACOMP/2013/094.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Two-port multimode interference reflectors based on aluminium mirrors in a thick SOI platform

  • Sánchez Fandiño, Javier Antonio
  • Doménech Gómez, José David
  • P. Muñoz|||0000-0001-6026-1649
Multimode interference reflectors (MIRs) were recently introduced as a new type of photonic integrated devices for on-chip, broadband light reflection. In the original proposal, different MIRs were demonstrated based on total internal reflection mirrors made of two deep-etched facets. Although simpler to fabricate, this approach imposes certain limits on the shape of the field pattern at the reflecting facets, which in turn restricts the types of MIRs that can be implemented. In this work, we propose and experimentally demonstrate the use of aluminium-based mirrors for the design of 2-port MIRs with variable reflectivity. These mirrors do not impose any restrictions on the incident field, and thus give more flexibility at the design stage. Devices with different reflectivities in the range between 0 and 0.5 were fabricated in a 3 um thick SOI platform, and characterization of multiple dies was performed to extract statistical data about their performance. Our measurements show that, on average, losses both in the aluminium mirror and in the access waveguides reduce the reflectivities to about 79% of their target value. Moreover, standard deviations lower than +/- 5% are obtained over a 20 nm wavelength range (1540-1560 nm). We also provide a theoretical model of the aluminium mirror based on the effective index method and Fresnel equations in multilayer thin films, which shows good agreement with FDTD simulations., This work was supported by projects TEC2010-21337 (ATOMIC), FEDER UPVOV10-3E-492, FEDER UPVOV08-3E-008, TEC2013-42332-P (PIC4ESP), and PROMETEO 2013/012. The work of J. S. Fandino was supported by Grant FPU-2010 (ref: AP2010-1595).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Tunable and reconfigurable multi-tap microwave photonic filter based on dynamic Brillouin gratings in fibers

  • Sancho Durá, Juan
  • Primerov, N.
  • Chin, S.
  • Antman, Y.
  • Zadok, A
  • Thevenaz, L.
  • Sales Maicas, Salvador|||0000-0001-9457-976X
We propose and experimentally demonstrate new architectures to realize multi-tap microwave photonic filters, based on the generation of a single or multiple dynamic Brillouin gratings in polarization maintaining fibers. The spectral range and selectivity of the proposed periodic filters is extensively tunable, simply by reconfiguring the positions and the number of dynamic gratings along the fiber respectively. In this paper, we present a complete analysis of three different configurations comprising a microwave photonic filter implementation: a simple notch-type Mach-Zehnder approach with a single movable dynamic grating, a multi-tap performance based on multiple dynamic gratings and finally a stationary grating configuration based on the phase modulation of two counter-propagating optical waves by a common pseudo-random bit sequence (PRBS)., The authors wish to acknowledge the financial support of the European Community's Seventh Framework Programme (FP 7) project GOSPEL; the GVA PROMETEO 2008/092, Infraestructura FEDER UPVOV08-3E-008, the Plan Nacional I + D TEC2011-29120-C05-05, the Swiss National Science Foundation through project 200021-134546 and the EPFL Space Center, the Israeli Science Foundation (ISF), and the KAMIN program of the Chief Scientist Office, Israel Ministry of Industry, Trade and Labor.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

ZnO/ZnS heterostructures for hydrogen production by photoelectrochemical water splitting

  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Sanz Marco, Arturo
  • Montañés, Maria-Teresa|||0000-0002-2620-6926
  • Garcia-Anton, Jose|||0000-0002-0289-1324
This work studies the photoelectrochemical behavior of novel ZnO/ZnS heterostructures obtained by means of anodization in water and glycerol/water/NH4F electrolytes with different Na2S additions under controlled hydrodynamic conditions. For this purpose different techniques such as Field Emission Scanning Electronic Microscopy (FE-SEM) with EDX, Raman spectroscopy and photoelectrochemical water splitting tests under standard AM 1.5 conditions have been carried out. The obtained results showed that the hydrodynamic conditions promoted an ordered nanotubular morphology which facilitates electron-hole separation and consequently, the photoelectrochemical activity for water splitting is enhanced. Additionally, the effect of glycerol in the anodization solutions seems to be beneficial for increasing the dark current photostability., The authors would like to express their gratitude for the financial support to the Ministerio de Economia y Competitividad (CTQ2013-42494-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012), and for the co-finance by the European Social Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Reflective arrayed waveguide gratings based on Sagnac loop reflectors with custom spectral response

  • Gargallo Jaquotot, Bernardo Andrés
  • Baños López, Rocío
  • Giesecke, Anna Lena
  • Bolten, Jens
  • Wahlbrink, Thorsten
  • Kleinjans, Herbert
  • P. Muñoz|||0000-0001-6026-1649
In this paper, a model for the analysis and design of a reflective Arrayed Waveguide Grating is presented. The device consists of one half of a regular AWG where each arm waveguide in the array is terminated with a phase shifter and a Sagnac loop reflector. By individually adjusting the phase shifter and Sagnac reflectivity in each arm, additional functionality to that previously reported in the literature is attained, since this enables tailoring the spectral response of the AWG. The design and experimental demonstration of Gaussian pass-band shape devices in Silicon-on-Insulator technology are reported. Methods to obtain flattened and arbitrary spectral responses are described and supported by simulation results. (C) 2014 Optical Society of America, The authors acknowledge financial support by the Spanish MINECO projects TEC2010-21337, TEC2013-42332-P; FEDER UPVOV 10-3E-492 and UPVOV 08-3E-008. B. Gargallo acknowledges financial support through FPI grant BES-2011-046100. The authors thank J.S. Fandino for helpful discussions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of annealing conditions on the photoelectrocatalytic performance of WO3 nanostructures

  • Roselló-Márquez, Gemma
  • Fernández Domene, Ramón Manuel
  • Sánchez Tovar, Rita
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] Nanostructured WO3 photoanodes have been synthesized by electrochemical anodization under controlled hydrodynamic conditions in acidic media in the presence of 0.05 M H2O2. Subsequently, samples have been subjected to a thermal treatment (annealing) at different temperatures (400 degrees C, 500 degrees C and 600 degrees C) and under different gaseous atmospheres (air, N-2, Ar). The influence of these annealing conditions on the morphology, crystallinity, photoelectrochemical behavior and dopant chemistry of the different photoanodes has been investigated through Electronic Microscopy, Raman Spectroscopy, Photoelectrochemical Impedance Spectroscopy and Mott-Schottky analysis. In general, higher annealing temperatures resulted in samples with higher degrees of crystallinity, which in turn favored the transport of electron-hole pairs through the semiconducting photoanodes. Besides, an increase in annealing temperature implied higher densities of donor species within the samples structure, which can explain the observed enhancement in charge transfer. Annealing temperature was observed to have a more marked impact on the photoelectrocatalytic performance of WO3 nanostructures than the gaseous atmosphere., Authors thank for the financial support to the Ministerio de Economia y Competitividad (Project Code: CTQ2016-79203-R; for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the co-finance by the European Social Fund). Authors would also like to thank the Ministerio de Ciencia, Innovacion y Universidades (Project Code: CTQ2017-90659-REDT (MEIS/AEI)). Ramon M. Fernandez Domene also thanks the UPV for the concession of a postdoctoral grant (PAID-10-17) and Gemma Rosello Marquez also thanks the Generalitat Valenciana for the concession of a pre-doctoral grant (ACIF/2018/159).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of Reynolds number on TiO2 nanosponges doped with Li+ cations

  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Muñoz-Portero, María-José|||0000-0002-7407-2598
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
[EN] Anatase TiO2 nanosponges have been synthesized by anodization of Ti, and Li+ cations have been inserted in these nanostructures. The influence of hydrodynamic conditions (Reynolds number, Re = 0 to Re = 600) during anodization has been studied. Li-Doped TiO2 nanosponges were characterized by field emission scanning electron microscopy (FE-SEM), Raman confocal microscopy, electrochemical impedance spectroscopy (EIS) and Mott¿Schottky analysis (M¿S). The photoelectrochemical performance and resistance to photocorrosion were also measured. Li¿TiO2 nanosponges proved to be better photocatalysts for water splitting than Li¿TiO2 nanotubes. Moreover, the photoelectrochemical behavior of the Li-doped nanosponges improved as the Reynolds number increased., The authors acknowledge the financial support from the Ministerio de Economia y Competitividad (Project Code: CTQ2016-79203-R) and its help in the Laser Raman Microscope acquisition (UPOV08-3E-012), and acknowledge co-funding by the European Social Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A kinetic study of the formation of smectic phases in novel liquid crystal ionogens

  • Martinez-Felipe, Alfonso
  • Badia, J.D.
  • Santonja Blasco, Laura
  • Imrie, C.T.
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] A multi-rate non-isothermal kinetic analysis of the isotropic-melt to liquid crystalline phase transition of novel liquid crystalline ionogenic copolymers, LCIs, the 10-(4-methoxyazobenzene-4'-oxy)decyl methacrylate]-co-2-(acrylamido-2-methyl-1-propanesulfonic acid)s, 10-MeOAzB/AMPS, copolymers, has been performed by means of calorimetric experiments. An analytical methodology which includes the study of the phase transition rate parameter, the determination of the activation energies by using Kissinger and Flynn-Wall-Ozawa models, and the study of the phase transition kinetics by the use of the Avrami theory, has been applied. The formation of the mesophases from the isotropic state occurred close to thermodynamic equilibrium. The results evidence the presence of several individual processes in the formation of liquid crystalline phases from the melt and a strong dependence of phase transition rates and activation energies with acid contents. A decrease in the phase transition rate, related to a decrease in the overall change of the transition entropy, has been observed. The final inhibition of the liquid crystal (LC) behaviour is ascribed to an exponential increase in the activation energy of the phase transition, promoted by strong acid aggregation. An optimum composition of the 10-MeOAzB/AMPS copolymers to achieve the dual characteristics of LCIs (ionogenic and liquid crystalline behaviour) requires acid concentrations capable of promoting structure-forming effects on the LC phases and the evolution of phase separated morphologies., The authors would like to acknowledge the Spanish Ministry of Science and Innovation, through the Research Projects ENE2007-67584-C03, UPOVCE-3E-013, ENE2011-28735-C02-01, IT-2009-0074 and three FPI and FPU predoctoral grants, and the financial support of the Generalitat Valenciana, through the Grisolia and Forteza programs and the ACOMP/2011/189 program. The Vice-rectorate for Research of UPV is also thanked for additional support through the PAID 05-09-4331, PAID-05-11/2806, and PAID 06-11-2037 projects.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Efecto de las variables de proceso sobre el comportamiento a flexión de aleaciones Ti - 3% at. X (X = Nb, Ta) obtenidas por pulvimetalurgia, Effect of process variables on the flexural behavior of alloys Ti - 3% at. X (X = Nb, Ta) obtained by powder metallurgy

  • Franconetti Rodríguez, Patricia
  • Candel Bou, Juan José
  • Vicente-Escuder, Ángel|||0000-0001-8425-3424
  • Amigó, Vicente|||0000-0002-2107-0273
[ES] El niobio y el tantalio se añaden al titanio para formar nuevas aleaciones beta con mayor biocompatibilidad para aplicaciones biomédicas. Ambos elementos tienen un elevado punto de fusión, por lo que su difusión en estado sólido es limitada. En este trabajo se han fabricado por pulvimetalurgia muestras de titanio con 3% atómico de niobio o tantalio. Se estudia el efecto de la presión de compactación, la temperatura y el tiempo de sinterizado sobre la resistencia, la elasticidad y la ductilidad a flexión. Los resultados muestran que ambos elementos se comportan de manera semejante: aumenta la resistencia entre 20-25%, la elasticidad entre 0-10% y la ductilidad en más de un 150%. Por tanto, la adición de estos elementos es beneficiosa para las propiedades mecánicas. El análisis estadístico muestra que el efecto de la temperatura y presión son importantes mientras que el efecto del tiempo es poco significativo e incluso perjudicial en estas aleaciones., [EN] Niobium and tantalum are added to titanium alloys to form new beta alloys with higher biocompatibility for biomedical applications. Both elements have a high melting point, that is the reason for their limited solid state diffusion. In this work samples of titanium with 3% at. niobium and tantalum have been manufactured by powder metallurgy. The effect of the compacting pressure, temperature and the sintering time on the strength, elasticity and ductility in bending has been studied. The results show that both elements behave similarly: flexural strength increases between 20-25%, elasticity between 0-10% and ductility over 150%. Therefore, the addition of these elements is beneficial to mechanical properties. Statistical analysis shows that the effect of temperature and pressure are important, while the effect of time is insignificant and even harmful in these alloys., Los autores agradecen al MINECO la financiación a través del programa de Formación de Personal Investigador con la ayuda BES-2009-013589 así como a través del proyecto de investigación bilateral con Brasil PIB2010BZ-00448. Este trabajo se ha desarrollado en la Unidad de Tecnología de Materiales de la Universidad Politécnica de Valencia asociada al CSIC a través del Centro Nacional de Investigaciones Metalúrgicas (CENIM). Por último, agradecer a la UE por la financiación recibida a través del FEDER en el proyecto UPOV08-3E-005 para la compra de equipamiento y a la Generalitat Valenciana por la ayuda ACOMP/2012/094.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Original Approach to Synthesize TiO2/ZnO Hybrid nanosponges used as photoanodes for photoelectrochemical applications

  • Navarro-Gázquez, Pedro José
  • Sánchez-Tovar, Rita
  • Fernández-Domene, Ramón Manuel
  • Muñoz-Portero, María-José|||0000-0002-7407-2598
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] In the present work, TiO2/ZnO hybrid nanosponges have been synthesized for the first time. First, TiO2 nanosponges were obtained by anodization under hydrodynamic conditions in a glycerol/water/NH4F electrolyte. Next, in order to achieve the anatase phase of TiO2 and improve its photocatalytic behaviour, the samples were annealed at 450 degrees C for 1 h. Once the TiO2 nanosponges were synthesized, TiO2/ZnO hybrid nanosponges were obtained by electrodeposition of ZnO on TiO2 nanosponges using different temperatures, times, and concentrations of zinc nitrate (Zn(NO3)(2)). TiO2/ZnO hybrid nanosponges were used as photoanodes in photoelectrochemical water splitting tests. The results indicate that the photoelectrochemical response improves, in the studied range, by increasing the temperature and the Zn(NO3)(2) concentration during the electrodeposition process, obtaining an increase in the photoelectrochemical response of 141% for the TiO2/ZnO hybrid nanosponges electrodeposited at 75 degrees C with 10 mM Zn(NO3)(2) for 15 min. Furthermore, morphological, chemical, and structural characterization was performed by Field Emission Scanning Electron Microscopy (FE-SEM) with Energy Dispersive X-Ray spectroscopy (EDX), Raman Confocal Laser Spectroscopy, X-Ray Photoelectron Spectroscopy (XPS), and Grazing Incidence X-Ray Diffraction (GIXRD)., The authors would like to express their gratitude for the financial support of the Agencia Estatal de Investigación (PID2019-105844RB-I00/MCIN/AEI/10.13039/501100011033), for the co-finance by the European Social Fund, and for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012). Pedro José Navarro Gázquez also thanks the Grant PEJ2018-003596-A-AR funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Figures of merit for self-beating filtered microwave photonic systems

  • Pérez-López, Daniel
  • Sánchez Fandiño, Javier Antonio
  • Alavi, Hossein
  • Gasulla Mestre, Ivana|||0000-0001-8088-7796
  • Capmany Francoy, José|||0000-0002-6460-4167
  • P. Muñoz|||0000-0001-6026-1649
[EN] We present a model to compute the figures of merit of self-beating Microwave Photonic systems, a novel class of systems that work on a self-homodyne fashion by sharing the same laser source for information bearing and local oscillator tasks. General and simplified expressions are given and, as an example, we have considered their application to the design of a tunable RF MWP BS/UE front end for band selection, based on a Chebyshev Type-II optical filter. The applicability and usefulness of the model are also discussed., This research work is funded by INTEL Corporation. In addition, the authors wish to acknowledge the financial support given by the Research Excellency Award Program GVA PROMETEO II/2013/012, Spanish MINECO projects TEC2013-42332-P PIF4ESP, TEC2015-69787-REDT PIC4TB and TEC2014-60378-C2-1-R MEMES, as well as the projects FEDER UPVOV 10-3E-492 and FEDER UPVOV 08-3E-008. The work of D. Perez was supported by the FPI-UPV Grant Program from the Universitat Politecnica de Valencia and the work of I. Gasulla was supported by the Spanish MINECO through the Ramon y Cajal Program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization of Crosslinked Poly(vinyl alcohol)-Based Membranes with Different Hydrolysis Degrees for Their Use as Electrolytes in Direct Methanol Fuel Cells

  • Martinez-Felipe, Alfonso
  • Moliner Estopiñán, Cristina Elia
  • Imrie, Corrie Thomas
  • Ribes-Greus, A.|||0000-0003-2460-8291
The effect of the degree of hydrolysis of poly(vinyl alcohol) (PVA) substrates on the preparation and properties of crosslinked membranes prepared via esterification with sulfosuccinic acid (SSA) has been studied using attenuated total reflectance-Fourier transform spectroscopy (ATR-FTIR) and thermogravimetric analysis (TGA). Three PVA substrates with degrees of hydrolysis of 89, 96, and 99% were crosslinked using SSA at high temperatures. FTIR spectroscopy revealed that esterification occurred in all the membranes and to some extent, prior to heat treatment. The final morphology of the membranes was dependent on both the SSA concentration and the composition of the PVA substrate. Thermogravimetric analysis showed an increase in the thermal stability of the PVA-SSA membranes with respect to their PVA substrates arising from the formation of a crosslinked structure. In addition, TGA revealed the presence of free and tightly bound water in the PVA-SSA membranes. Thermal treatment had a more pronounced effect on the properties of the PVA substrates having higher degrees of hydrolysis. The results from the swelling tests, the ionic exchange capacities (IEC) and the tests in DMFC monocells demonstrated that a balance between water and methanol selectivity and ionic conduction determines the potential of these materials to act as electrolytes in fuel cells, Contract grant sponsor: Generalitat Valenciana; contract grant number: Grisolia and Forteza 2010 and 2011.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A statistical design of experiments for optimizing the MALDI-TOF-MS sample preparation of polymers. An application in the assessment of the thermo-mechanical degradation mechanisms of poly (ethylene terephthalate)

  • Badía Valiente, José David
  • Strömberg, Emma Marie
  • Karlsson, Sigbritt
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] The sample preparation procedure for MALDI-TOF MS of polymers is addressed in this study by the application of a statistical Design of Experiments (DoE). Industrial poly (ethylene terephthalate) (PET) was chosen as model polymer. Different experimental settings (levels) for matrixes, analyte/matrix proportions and concentrations of cationization agent were considered. The quality parameters used for the analysis were signal-to-noise ratio and resolution. A closer inspection of the statistical results provided the study not only with the best combination of factors for the MALDI sample preparation, but also with a better understanding of the influence of the different factors, individually or in combination, to the signal. The application of DoE for the improvement of the MALDI measure of PET stated that the best combination of factors and levels was the following: matrix (dithranol), proportion analyte/matrix/cationization agent (1/15/1, V/V/V), and concentration of cationization agent (2gL -1). In a second part, multiple processing by means of successive injection cycles was used to simulate the thermo-mechanical degradation effects on the oligomeric distribution of PET under mechanical recycling. The application of MALDI-TOF-MS showed that thermo-mechanical degradation primarily affected initially predominant cyclic species. Several degradation mechanisms were proposed, remarking intramolecular transesterification and hydrolysis. The ether links of the glycol unit in PET were shown to act as potential reaction sites, driving the main reactions of degradation. © 2011 Elsevier B.V., The authors would like to acknowledge the Spanish Ministry of Science and Innovation for the financial support through the Research Project UPOVCE-3E-013. The Spanish Ministry for Education is acknowledged for the concession of a predoctoral research position to J.D. Badia by means of the FPU program. Catalana de Polimers, S.A. and AIMPLAS are acknowledged for providing and processing the material, respectively. Royal Institute of Technology (KTH, Sweden) and Universitat Politecnica de Valencia (UPV, Spain) are also thanked for additional economical support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Comparative thermal, biological and photo degradation kinetics of polylactide and effect on crystallization rates

  • Santonja Blasco, Laura
  • Alamo, R. G.
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] A comparison is made between available literature and present results of the three major types of polylactide (PLA) degradation giving a compiled view on the details of degradation mechanisms with relation to explicit factors affecting degradation. The temporal decrease of molar mass has been analyzed under isothermal conditions at 220 degrees C, biological and photodegradation conditions using a polylactide (PLA) with similar to 4 mol% D units. The decrease of molar mass with time during biodegradation follows a first order process (M = M(o)e(-kt)) while the molar mass of specimens tested during thermal and photodegradation follows a second order law (1/M = (1/M-o) + kt) Literature data obtained in similar degradation conditions were also adequately fitted with these equations. This allows us to conclude that the main step in the three types of degradation is a random chain excision, with some differences in the algebraic functionality. Under the degradation conditions tested, the degradation rate follows the progression thermal > photo > biological. For equivalent molar mass, the effect of degradation type on cold crystallization and melting is significant indicating that degradation cannot be explained by a solely outcome of chains breakage and molar mass reduction. This feature is especially prominent when the linear growth rates of specimens subjected to bio or photo degradation are compared. Anhydride groups that are formed during photodegradation decrease the crystallization rate compared to biodegraded specimens of equivalent molar mass. The molar mass dependence of the maximum growth rate follows a power law with exponents 1.3 for bio and 1.0 for photodegraded specimens, representative of semi-entangled systems. The temperature coefficient of the growth rate, analyzed according to secondary nucleation leads to a linear dependence for bio and photodegraded specimens, and to values of the surface free energy of crystallites that decrease from similar to 85 to 55 erg/cm(2) with decreasing molar mass. Combinations of molar mass characterization, FTIR, and thermal and crystallization rate analysis are proven useful strategies to assess and discriminate macroscopic changes of PLA structure induced by different types of degradation. This work also underlines the importance of analyzing the linear growth rates as a parameter that uncovers specific structural changes during degradation. (c) 2012 Elsevier Ltd. All rights reserved., The authors thank the USA National Science Foundation for partial funding of this work. Also acknowledged are the Spanish Ministry of Science and Innovation, Research Projects ENE2007-67584-C03-02, UPOVCE-3E-013, ENE2011-28735-C02-01, FPI predoctoral grant to L.Santonja-Blasco, and support from the Generalitat Valenciana, through the ACOMP/2011/189 project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Assessing the MALDI-TOF MS sample preparation procedure to analyze the influence of thermo-oxidative ageing and thermo-mechanical degradation on poly (Lactide)

  • Badia, J.D.
  • Strömberg, Emma Marie
  • Karlsson, Sigbritt
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] Multiple processing by means of successive injection cycles was used to simulate the thermo-mechanical degradation effects on the oligomeric distribution of PLA under mechanical recycling. Likewise, an accelerated thermal ageing over PLA glass transition was performed in order to simulate its service life. MALDI-TOF MS was used for the analysis and the sample preparation procedure was assessed by means of a statistical Design of Experiments (DoE). The quality effects in use for the analysis were signal-to-noise ratio and Resolution. Different matrixes, analyte/matrix proportions and the use of NaTFA as cationization agent were considered. A deep inspection of the statistical results provided a better understanding of the influence of the different factors, individually or in combination, to the signal. The application of DoE for the improvement of the MALDI measurement of PLA stated that the best combination of factors (levels) was the following: matrix (s-DHB), proportion analyte/matrix (1/5 V/V), and no use of cationization agent. Degradation primarily affected the initially predominant cyclic [LA C] n and linear H[LA L] nOH species, where LA stands for a PLA repeating unit. Intramolecular and intermolecular transesterifications as well as hydrolytic and homolytic reactions took place during the formation and disappearance of oligomeric species. In both degradation mechanisms induced by thermal ageing and thermo-mechanical degradation, the formation of H[LA L] nOCH 3 by intermolecular transesterifications was highlighted. © 2011 Elsevier Ltd. All rights reserved., The authors would like to acknowledge the Spanish Ministry of Science and Innovation for the financial support through the Research Project UPOVCE-3E-013. The Spanish Ministry for Education is acknowledged for the concession of a predoctoral research position to J.D. Badia by means of the FPU program. AIMPLAS is acknowledged for providing and processing the material, respectively. Royal Institute of Technology (KTH, Sweden) and Universitat Politecnica de Valencia (UPV, Spain) are also thanked for additional economical support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

TiO2 Nanostructures for Photoelectrocatalytic Degradation of Acetaminophen

  • Borràs-Ferrís, Joan
  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Muñoz-Portero, María-José|||0000-0002-7407-2598
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] Advanced oxidation processes driven by renewable energy sources are gaining attention in degrading organic pollutants in waste waters in an efficient and sustainable way. The present work is focused on a study of TiO2 nanotubes as photocatalysts for photoelectrocatalytic (PEC) degradation of acetaminophen (AMP) at different pH (3, 7, and 9). In particular, different TiO2 photocatalysts were synthetized by stirring the electrode at different Reynolds numbers (Res) during electrochemical anodization. The morphology of the photocatalysts and their crystalline structure were evaluated by field emission scanning electron microscopy (FESEM) and Raman confocal laser microscopy (RCLM). These analyses revealed that anatase TiO2 nanotubes were obtained after anodization. In addition, photocurrent densities versus potential curves were performed in order to characterize the electrochemical properties of the photocatalysts. These results showed that increasing the Re during anodization led to an enhancement in the obtained photocurrents, since under hydrodynamic conditions part of the initiation layer formed over the tubes was removed. PEC degradation of acetaminophen was followed by ultraviolet-visible absorbance measurements and chemical oxygen demand tests. As drug mineralization was the most important issue, total organic carbon measurements were also carried out. The statistical significance analysis established that acetaminophen PEC degradation improved as hydrodynamic conditions linearly increased in the studied range (Re from 0 to 600). Additionally, acetaminophen conversion had a quadratic behavior with respect to the reaction pH, where the maximum conversion value was reached at pH 3. However, in this case, the diversity of the byproducts increased due to a different PEC degradation mechanism., This research was funded by The Ministerio de Economia y Competitividad and cofinanced by the European Social Fund (CTQ2016-79203-R and UPOV08-3E-012).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Linear Propagation Properties for a 300 nm Film Height Silicon Nitride Photonic Integration Platform in the Optical Telecom C-band

  • Bru-Orgiles, Luis Alberto
  • Pérez-López, Daniel
  • Doménech, David
  • Sanchez, Ana M.
  • Cirera, Josep M.
  • Sanchez, Javier
  • Domínguez, Carlos
  • Mico-Cabanes, Gloria|||0000-0003-1812-5883
  • Pastor Abellán, Daniel|||0000-0002-5297-3918
  • P. Muñoz|||0000-0001-6026-1649
[EN] In this paper we report on the characterization of the propagation loss, group index, dispersion, birefringence, and thermo-optic phase shift of Si 3 N 4 strip waveguides with guiding film height of 300 nm fabricated using low-preassure chemical vapour deposition, The authors acknowledge financial support through projects TEC2013-42332-P, TEC2015-69787-REDT PIC4TB, TEC2016-80385-P SINXPECT, TEC2014-54449-C3-1-R, GVA PROMETEO 2013/012, EC H2020-ICT-27-2015 CSA 687777 and IP 688519, FEDER UPVOV 10-3E-492 and 08- 3E-008. G.M. acknowledges BES-2014-068523. L.B. acknowledges PTA2015-11309-I
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study of Structure Formation in Side-Chain Liquid Crystal Copolymers by Variable Temperature Fourier Transform Infrared Spectroscopy

  • Martinez-Felipe, Alfonso
  • Imrie, Corrie Thomas
  • Ribes-Greus, A.|||0000-0003-2460-8291
The formation of smectic phases in side-chain liquid crystal copolymers, SCLCPs, containing sulfonic acid-based nonmesogenic units, has been investigated using variable temperature FT-IR microscopy. Two copolymers have been characterized, namely, the poly[10-(4-methoxy-4′-oxy-azobenzene) decyl methacrylate]−copoly[2-acrylamido-2-methyl-1- propanesulfonic acid]s, the X-MeOAzB/AMPS copolymers, containing X = 0.71 and 0.56 mol fraction of mesogenic sidechains, respectively. For comparative purposes the corresponding side chain liquid crystal homopolymer, poly[10-(4-methoxy-4′- oxy-azobenzene) decyl methacrylate], MeOAzB, has also been characterized. The 0.56-MeOAzB/AMPS copolymer exhibits a bilayer smectic A phase, in which the mesogenic side chains constitute one layer with a SmA1 packing arrangement and the sulfonic acid groups another; whereas in the smectic A phase shown by the 0.71-MeOAzB/AMPS copolymer, the acid groups are located within the smectic layers giving a partially interdigated SmAd phase and reducing side chain packing efficiency. Smectic stabilization is attributed to a combination of stronger interactions involving the ester groups, as reflected in changes to the C O stretching band at ν ∼ 1730 cm−1 , and hydrogen bonding between the amide groups within the acid-based layers, as inferred by changes to the NH stretching band at ν ∼ 3320 cm−1 . The temperature response observed for groups with different chemical environments permits the mapping of the short-range interactions between the various structural components in SCLCPs with a view to controlling the functionality of the materials., This paper is meant to be a tribute and recognition to the research activity of Professor Giulio Sarti. The authors also thank the Spanish Ministry of Science and Innovation, through the Research Projects ENE2007-67584-C03, UPOVCE-3E-013, IT2009-0074, ENE2011-28735-C02-01 and two FPI and FPU predoctoral grants, and the financial support of the Generalitat Valenciana, through the Grisolia (GRISOLIAP/2010/057, GRISOLIAP/2012/056, GRISOLIAP/2013/A/036) and Forteza programs and the ACOMP/2011/189 program. The UPV is also thanked for additional support through the PAID 05-09-4331 and PAID-06-11 program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Quantum model of light transmission in array waveguide gratings

  • Capmany Francoy, José|||0000-0002-6460-4167
  • Mora Almerich, José|||0000-0002-2877-4118
  • P. Muñoz|||0000-0001-6026-1649
  • Fernández-Pousa, Carlos R.
We develop, to the best of our knowledge, the first model for an array waveguide grating (AWG) device subject to quantum inputs and analyze its basic transformation functionalities for single-photon states. A commercial, cyclic AWG is experimentally characterized with weak input coherent states as a means of exploring its behaviour under realistic quantum detection. In particular it is shown the existence of a cutoff value of the average photon number below which quantum crosstalk between AWG ports is negligible with respect to dark counts. These results can be useful when considering the application of AWG devices to integrated quantum photonic systems. (C)2013 Optical Society of America, The authors wish to acknowledge the financial support given by the Research Excellency Award Program GVA PROMETEO 2013/012; Proof of Concept from the Universitat Politecnica de Valencia SP20120588; Spanish Ministerio de Economia y Competitividad projects TEC2011-29120-C05-02 and -05, and TEC2010-21337 ATOMIC, and FEDER projects UPVOV08-3E-008 and UPVOV10-3E-492.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Iron oxide nanostructures for photoelectrochemical applications: Effect of applied potential during Fe anodization

  • Lucas-Granados, Bianca
  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] In photoelectrochemistry, a suitable photoanode leading to high efficiencies in photocatalytic processes is a research challenge. Iron oxide nanostructures are promising materials to be used as photoanodes. In this work, different potentials during iron anodization were applied to study the properties of the synthesized nanostructures. Results revealed that nanostructures anodized at 50V presented well-defined nanotubular structures with open-tube tops, and they achieved values of photocurrent density of 0.11 mA cm(-2) at 0 rpm and 0.14 mA cm(-2) at 1000 rpm (measured at 0.50 V-Ag/Agcl), corresponding to the oxygen evolution reaction from water, i.e. 2H(2)O+4h(+)-> 4H(+)+O-2, demonstrating their good photoelectrochemical behavior., The authors would like to express their gratitude for the financial support granted to Bianca Lucas Granados by the Ministerio de Economia y Competitividad (Reference: BES-2014-068713 and Project CTQ2016-79203-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the co-finance by the European Social Fund, and to the UPV for the concession of a post-doctoral grant (PAID-10-17) to Ramon M. Fernandez Domene.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Integrable high order UWB pulse photonic generator based on cross phase modulation in a SOA-MZI

  • Moreno, Vanessa
  • Rius Mercado, Manuel
  • Muriel Fernandez, Miguel Angel
  • Mora Almerich, José|||0000-0002-2877-4118
  • Capmany Francoy, José|||0000-0002-6460-4167
We propose and experimentally demonstrate a potentially integrable optical scheme to generate high order UWB pulses. The technique is based on exploiting the cross phase modulation generated in an InGaAsP Mach-Zehnder interferometer containing integrated semiconductor optical amplifiers, and is also adaptable to different pulse modulation formats through an optical processing unit which allows to control of the amplitude, polarity and time delay of the generated taps. (c) 2013 Optical Society of America, The research leading to these results has been funded by the national project TEC2010-21303-C04-02 and TEC2011-26642 funded by the Ministerio de Economia y Competitividad and the projects FEDER UPVOV08-3E-008 and UPVOV10-3E-492. Miguel A. Muriel acknowledges Montse Aragon Castilla for her helpful assistance.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sown Diversity Effects on the C and N Cycle and Interactions with Fertilization

  • Aljazairi, Salvador
  • Ribas Artola, Angela
  • Llurba, Rosa
  • Ferrio, Juan Pedro
  • Voltas, Jordi
  • Nogués, Salvador
  • Sebastiá, Maria Teresa
A better understanding of the role of plant composition and N cycle on agroecosystems is necessary, as these will be affected by future developments in agriculture intensification. To explore the effect of plant diversity on yield and carbon (C) and nitrogen (N) balances in forage mixtures, identifying potential co-benefits between functions. We analyzed results from a field experiment where plants of three forage species (a grass, a legume, and a non-legume forb) were cultivated in monocultures and mixtures. Three years after sward establishment, dry matter yield, together with δ<sup>15</sup>N, δ<sup>13</sup>C, and C and N content in plant and soil material were measured. In addition, we analyzed a second scenario to investigate the effect of fertigation with pig slurry (δ<sup>15</sup>N = +8.4‰) on the C and N balances of forage species. Results support the hypothesis that C and N allocation is affected by plant diversity. Plant composition affected N source (% N derived from air, % N derived from soil, and % N transferred in mixtures). In addition, sown diversity increased yield and modulated C and N balances. The δ<sup>15</sup>N of samples was affected by both plant composition and fertigation. These results are consistent with previous work showing strong plant composition effects on N-balances, and the potential role that legumes play in enhancing nitrogen sources (derived from the atmosphere) into forage mixture systems. This study contributes to the prediction of suitable sown plant community composition and N management for the optimum agriculture with increased productivity and at the same time reduced environmental impact., This research was funded by the Spanish Ministry of the Environment (D-SPRING: A418/2007/2-08.2; and OPS: 209/PC08/3-08.2); SUSFORAGE Project funded by the Partnership for Research and Innovation in the Mediterranean Area (PRIMA) (PRIMA Call 2020, Section 2/PCI 2021-121982) and FUELAGRIMAGE Project Grant TED2021-130503B-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR., Peer reviewed
Archivo Digital UPM
Publication Contribución de congreso (ConferenceOutput)

High order UWB pulses generation based on a scalable phase-to-intensity technique

  • Moreno Galue, Vanessa
  • Mora, José
  • Barrera, David
  • Muriel Fernández, Miguel Ángel|||0000-0002-5148-6624
  • Capmany, José
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Nitrogen facilitation was maintained in sown Mediterranean forage mixtures despite drought stress conditions with concurrent general benefits upon plant aboveground water status and yield

  • Llovet Martin, Alba|||0000-0001-9723-0117
  • Llurba, Rosa
  • Aljazairi, Salvador|||0000-0002-1564-9860
  • Mattana, Stefania|||0000-0001-8427-8816
  • Plaixats i Boixadera, Josefina|||0000-0002-4649-3125
  • Nogués, Salvador|||0000-0002-1694-0924
  • Sebastià, Ma.T|||0000-0002-9017-3575
  • Ribas Artola, Àngela|||0000-0002-5938-2408
There is an urge to optimise the sustainability and resilience of grasslands, especially in light of the extreme weather risks posed by climate change. Plant sown diversity could contribute to mitigating these risks by improving resource use efficiency as well as reducing reliance on fertilisation. We established a field experiment to determine forage swards' performance in terms of water use, nitrogen (N) use, and dry matter (DM) yield in a semi-arid Mediterranean area which faced a severe drought period. Most variables were tested over three growing seasons, whilst DM yield had an extra year of sampling in which two levels of N fertilisation were tested. Following the Generalised Diversity-Interactions modelling approach, we manipulated the composition and evenness of forage swards including a grass (Festuca arundinacea), a legume (Medicago sativa), and a non-legume forb (Cichorium intybus). Communities were grown as monocultures or mixtures of three species according to a simplex design, which allowed us to estimate separately the two components of the diversity effect: the individual species effects and that due to species interactions. Models were tested both with sown proportions (P) and realised proportions (P). The P models indicated a major beneficial effect of mixtures in contrast to the average monoculture performance for all studied variables. In contrast, P models revealed that some of the effects in P models are indeed explained by the growing proportion of M. sativa over time. However, beneficial interaction effects are still found in P models, especially concerning N fixation (with δN as proxy), which was maintained regardless of the drought stress level experienced by the swards. All things considered, mixed swards merit attention as a valuable nature-based solution that can optimise N management (by boosting N input through fixation) as well as water use. This would result in well-nurtured swards with a better ability to cope with drought stress and maintain productivity.