Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 364
Encontrada(s) 4 página(s)

BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Pilot-scale bioelectrochemical system for simultaneous nitrogen and carbon removal in urban wastewater treatment plants

  • San Martin Bécares, María Isabel
  • Mateos González, Raúl
  • Carracedo del Río, Begoña
  • Escapa González, Adrián
  • Morán Palao, Antonio
[EN] This study aims to characterize the performance of a 150 L bioelectrochemical system-based plant, during the simultaneous carbon and nitrogen removal from several waste streams of wastewater treatment plants. The bioelectrochemical system (BES) contained five electrode pairs (operated hydraulically and electrically in parallel) and was fed with either wastewater, centrate (nutrient-rich liquid stream produced during the dewatering of digested biomass), or a mixture of both over 63 days, with a hydraulic retention time of one day. Total organic carbon and total nitrogen removal rates averaged 80% and 70%, respectively, with a specific energy consumption of 0.18 kWh·m−3 (BES + ancillary equipment). This work also underlines the challenges of using BES for nitrogen removal, highlighting the limitations of the current design, and suggesting some strategies for improvement., SI, Ministerio de Educación, Cultura y Deporte
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Assessing anodic microbial populations and membrane ageing in a pilot microbial electrolysis cell

  • San Martin Bécares, María Isabel
  • Sotres, Ana
  • Alonso García, Raúl Marcos
  • Díaz-Marcos, Jordi
  • Morán Palao, Antonio
  • Escapa González, Adrián
Bioelectrochemical system, [EN] First large-scale experiences of bioelectrochemical systems (BES) are underway. However, there is still little knowledge on how the different elements that integrate a BES behave in near real-life conditions. This paper aims at assessing the impact of long-term operation on the cation exchange membrane and on the anodic biofilm of two 16 L Microbial Electrolysis Cells (MEC) designed for hydrogen production and ammonia recovery from pig slurry. Membrane deterioration was examined by physical, chemical and microscopy techniques at different locations, revealing a strong attachment of microorganisms and a significant decay in membrane properties such as ion exchange capacity and thermal stability. Anode microbial communities did not show a dramatic shift in the eubacteria composition at different sampling areas, although the relative abundance of some bacterial groups showed a clear vertical stratification. After 100 days of continuous operation, MEC performance did not declined significantly maintaining ammonium transport rates and H2 production rates of 15.3 gN d−1 m−2 and 0.2 LH2·L−1reactor·d−1 respectively., SI, Ministerio de Economía y Competitividad, Junta de Castilla y León, Ministerio de Educación, Cultura y Deporte
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Identification of molecular biomarkers associated with disease progression in the testis of bulls infected with Besnoitia besnoiti

  • González Barrio, David
  • Diezma Díaz, Carlos
  • Gutiérrez Expósito, Daniel
  • Tabanera, Enrique
  • Jiménez Meléndez, Alejandro
  • Pizarro, Manuel
  • González Huecas, Marta
  • Ferre, Ignacio
  • Ortega Mora, Luis Miguel
  • Álvarez García, Gema
[EN]Breeding bulls infected with Besnoitia besnoiti may develop sterility during either acute or chronic infection. The aim of this study was to investigate the molecular pathogenesis of B. besnoiti infection with prognosis value in bull sterility. Accordingly, five well-characterized groups of naturally and experimentally infected males were selected for the study based on clinical signs and lesions compatible with B. besnoiti infection, serological results and parasite detection. A broad panel of molecular markers representative of endothelial activation and fibrosis was investigated and complemented with a histopathological approach that included conventional histology and immunohistochemistry. The results indicated the predominance of an intense inflammatory infiltrate composed mainly of resident and recruited circulating macrophages and to a lesser extent of CD3+ cells in infected bulls. In addition, a few biomarkers were associated with acute, chronic or subclinical bovine besnoitiosis. The testicular parenchyma showed a higher number of differentially expressed genes in natural infections (acute and chronic infections) versus scrotal skin in experimental infections (subclinical infection). In subclinical infections, most genes were downregulated except for the CCL24 and CXCL2 genes, which were upregulated. In contrast, the acute phase was mainly characterized by the upregulation of IL-1α, IL-6 and TIMP1, whereas in the chronic phase, the upregulation of ICAM and the downregulation of MMP13, PLAT and IL-1α were the most relevant findings. Macrophages could be responsible for the highest level of gene regulation in the testicular parenchyma of severely affected and sterile bulls, and all these genes could be prognostic markers of sterility., SI, This study was financed by the Spanish Ministry of Economy and Competitiveness (AGL-2016-75202-R), the Spanish Ministry of Science and Innovation (PID2019-103960RB-I00) and by the Community of Madrid (PLATESA P2018/ BAA-4370). DG-B was funded by the Spanish Ministry of Science through a Juan de la Cierva postdoctoral fellowship (FJCI-2016-27875). CD-D was financially supported through a grant from the Spanish Ministry of Economy and Competitiveness (BES-2014-069839) and AJ-M through a grant from the Spanish Ministry of Education, Culture and Sports (FPU, Grant Number FPU13/05481). I. Ferre, L.M. Ortega Mora y G. Álvarez-García are part of the TOXOSOURCES consortium, supported by funding from the European Union’s Horizon 2020 Research and Innovation programme under grant agreement No 773830: One Health European Joint Programme. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Vascular wall injury and inflammation are key pathogenic mechanisms responsible for early testicular degeneration during acute besnoitiosis in bulls

  • González Barrio, David
  • Diezma Díaz, Carlos
  • Tabanera, Enrique
  • Aguado Criado, Elena
  • Pizarro, Manuel
  • González Huecas, Marta
  • Ferre, Ignacio
  • Jiménez Meléndez, Alejandro
  • Criado, Fernando
  • Gutiérrez Expósito, Daniel
  • Ortega Mora, Luis Miguel
  • Álvarez García, Gema
[EN] BACKGROUND: Bovine besnoitiosis, caused by the apicomplexan parasite Besnoitia besnoiti, is a chronic and debilitating cattle disease that notably impairs fertility. Acutely infected bulls may develop respiratory signs and orchitis, and sterility has been reported in chronic infections. However, the pathogenesis of acute disease and its impact on reproductive function remain unknown. METHODS: Herein, we studied the microscopic lesions as well as parasite presence and load in the testis (pampiniform plexus, testicular parenchyma and scrotal skin) of seven bulls with an acute B. besnoiti infection. Acute infection was confirmed by serological techniques (IgM seropositive results and IgG seronegative results) and subsequent parasite detection by PCR and histological techniques. RESULTS: The most parasitized tissue was the scrotal skin. Moreover, the presence of tachyzoites, as shown by immunohistochemistry, was associated with vasculitis, and three bulls had already developed juvenile tissue cysts. In all animals, severe endothelial injury was evidenced by marked congestion, thrombosis, necrotizing vasculitis and angiogenesis, among others, in the pampiniform plexus, testicular parenchyma and scrotal skin. Vascular lesions coexisted with lesions characteristic of a chronic infection in the majority of bulls: hyperkeratosis, acanthosis and a marked diffuse fibroplasia in the dermis of the scrotum. An intense inflammatory infiltrate was also observed in the testicular parenchyma accompanied by different degrees of germline atrophy in the seminiferous tubules with the disappearance of various strata of germ cells in four bulls. CONCLUSIONS: This study confirmed that severe acute besnoitiosis leads to early sterility that might be permanent, which is supported by the severe lesions observed. Consequently, we hypothesized that testicular degeneration might be a consequence of (i) thermoregulation failure induced by vascular lesions in pampiniform plexus and scrotal skin lesions; (ii) severe vascular wall injury induced by the inflammatory response in the testis; and (iii) blood-testis barrier damage and alteration of spermatogenesis by immunoresponse, SI, This study was fnanced by the Spanish Ministry of Economy and Competitive‑ ness (AGL-2016-75202-R) and by the Community of Madrid (PLATESA P2018/ BAA-4370). DG-B is funded by the Spanish Ministry of Science through a Juan de la Cierva postdoctoral fellowship (FJCI-2016-27875). CD-D was fnancially supported through a grant from the Spanish Ministry of Economy and Com‑ petitiveness (BES-2014-069839) and AJ-M through a grant from the Spanish Ministry of Education, Culture and Sports (FPU, Grant Number FPU13/05481)
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Characterization of minimal lesions related to the presence of visna/maedi virus in the mammary gland and milk of dairy sheep

  • Gayo Roces, Elena
  • Polledo, L.
  • Magalde, A.
  • Balseiro Morales, Ana María
  • García Iglesias, María José
  • Pérez Martínez, Claudia
  • Preziuso, S.
  • Rossi, G.
  • García Marín, Juan Francisco
[EN] Background: In order to characterize the complete range of lesions, especially minimal, affecting mammary gland and viral antigen distribution and target cells using immunohistochemistry in naturally Visna/maedi (VM) 84 infected sheep were studied, forty-four from flocks with clinical cases (A) and 35 randomly sampled from two abattoirs (B) together with five negative controls (C). An immunocytochemistry technique was developed and further milk samples (n = 39) were used to study viral excretion, carrier cells and the role of milk and colostrum in the transmission of the disease. Results: All sheep from group C and three sheep from group B were negative to VM in tissue sections by histopathology, immunohistochemistry and PCR, and also in serum using ELISA. Several degrees of CD3 + lymphocytic interstitial mastitis were observed in groups A and B: minimal (+) n = 26 sheep; moderate (++), n = 32 and severe (+++), n = 12. No differences in lesion distribution were observed between groups A and B. Viral presence was confirmed by immunohistochemistry using two different antibodies and/or PCR in every tissue with lesions while serology was negative in six sheep with lesions. Two milk samples taken from milk tanks from two flocks from group A and fourteen milk samples from 29 infected sheep from group B were positive to VM (most of them from animals with moderate and severe lesions). Positivity was only found in macrophages, even in focal and minimal lesions, while no positivity was observed in epithelial or any other cells in either tissue and milk samples. Conclusions: This new observation of the minimal lesions described in this work increased the prevalence of VM lesions in mammary gland up to 90.9% and VM should be considered as a differential diagnosis when minimal interstitial lesions are detected. A high prevalence of VM was observed in intensive milk-producing sheep, ELISA serology did not detect as positivity all infected animals, while histology, IHC or PCR showed higher sensitivity. The cytological technique developed was very useful in milk-cell studies using hematoxylin and eosin and immunocytochemistry. Viral detection in milk samples (16/39) confirms a potential but limited role of milk/colostrum in viral transmission, SI, This work was supported by LE361A12–1 project of Castilla y León Government and FPU13/01081 grant of the Spanish Government. LE361A12– 1 project financed the materials necessary for collection, analysis and interpretation of data. FPU13/01081 grant financed the pre-doctoral contract of the main performer of experiments and manuscript writer EG
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Virulence in Mice of a Toxoplasma gondii Type II Isolate Does Not Correlate With the Outcome of Experimental Infection in Pregnant Sheep

  • Sánchez Sánchez, Roberto
  • Ferre, Ignacio
  • Regidor Cerrillo, Javier
  • Gutiérrez Expósito, Daniel
  • Ferre, Luis Miguel
  • Arteche Villasol, Noive
  • Moreno Gonzalo, Javier
  • Müller, Joachim
  • Aguado Martínez, Adriana
  • Pérez Pérez, Valentín
  • Hemphill, Andrew
  • Ortega Mora, Luis Miguel
  • Benavides Silván, Julio
[EN] Toxoplasma gondii is an apicomplexan parasite that infects almost all warm-blooded animals. Little is known about how the parasite virulence in mice extrapolates to other relevant hosts. In the current study, in vitro phenotype and in vivo behavior in mice and sheep of a type II T. gondii isolate (TgShSp1) were compared with the reference type II T. gondii isolate (TgME49). The results of in vitro assays and the intraperitoneal inoculation of tachyzoites in mice indicated an enhanced virulence for the laboratory isolate, TgME49, compared to the recently obtained TgShSp1 isolate. TgShSp1 proliferated at a slower rate and had delayed lysis plaque formation compared to TgME49, but it formed more cyst-like structures in vitro. No mortality was observed in adult mice after infection with 1-105 tachyzoites intraperitoneally or with 25-2,000 oocysts orally of TgShSp1. In sheep orally challenged with oocysts, TgME49 infection resulted in sporadically higher rectal temperatures and higher parasite load in cotyledons from ewes that gave birth and brain tissues of the respective lambs, but no differences between these two isolates were found on fetal/lamb mortality or lesions and number of T. gondii-positive lambs. The congenital infection after challenge at mid-pregnancy with TgShSp1, measured as offspring mortality and vertical transmission, was different depending on the challenged host. In mice, mortality in 50% of the pups was observed when a dam was challenged with a high oocyst dose (500 TgShSp1 oocysts), whereas in sheep infected with the same dose of oocysts, mortality occurred in all fetuses. Likewise, mortality of 9 and 27% of the pups was observed in mice after infection with 100 and 25 TgShSp1 oocysts, respectively, while in sheep, infection with 50 and 10 TgShSp1 oocysts triggered mortality in 68 and 66% of the fetuses/lambs. Differences in vertical transmission in the surviving offspring were only found with the lower oocyst doses (100% after infection with 10 TgShSp1 oocysts in sheep and only 37% in mice after infection with 25 TgShSp1 oocysts). In conclusion, virulence in mice of T. gondii type II isolates may not be a good indicator to predict the outcome of infection in pregnant sheep, SI, RS-S is supported by a fellowship from the Spanish Ministry of Education, Culture, and Sports (MECD), as a part of the Program of Training of University Teaching Staff (FPU, grant number FPU13/03438) and a mobility grant for predoctoral short stays in R+D centers (EST16/0719). DG-E is the recipient of a postdoctoral contract from the Junta de Castilla y León, partially funded by the European Social Fund (European Union). NA-V is the recipient of a predoctoral contract from the Ministerio de Economía, Industria y Competitividad (Ref. BES-2016-076513). This work was supported by the Ministry of Economy and Competitiveness (AGL2016-75935-C2-1-R and C2-2-R), the Community of Madrid, Spain (PLATESA, S2013/ABI2906), Junta de Castilla y León (LE080U16), and a grant of the Swiss National Science Foundation to AH (project No. 310030_165782)
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Genetic Characterization and Phylogenetic Analysis of Small Ruminant Lentiviruses Detected in Spanish Assaf Sheep with Different Mammary Lesions

  • Gayo Roces, Elena
  • Cuteri, Vincenzo
  • Polledo, Laura
  • Rossi, Giacomo
  • García Marín, Juan Francisco
  • Preziuso, S.
[EN]Small Ruminant Lentiviruses (SRLVs) are widespread in many countries and cause economically relevant, slow, and persistent diseases in sheep and goats. Monitoring the genetic diversity of SRLVs is useful to improve the diagnostic tools used in the eradication programs. In this study, SRLVs detected in Spanish Assaf sheep with different grades of lymphoproliferative mastitis were sequenced. Genetic characterization showed that most samples belonged to type A and were closer to Spanish SRLV isolates previously classified as A2/A3. Four samples belonged to subtype B2 and showed higher homology with Italian B2 strains than with Spanish B2 isolates. Amino acid sequences of immuno-dominant epitopes in the gag region were very conserved while more alterations were found in the LTR sequences. No significant correlations were found between grades of mastitis and alterations in the sequences although samples with similar histological features were phylogenetically closer to each other. Broader genetic characterization surveys in samples with different grades of SRLV-lesions are required for evaluating potential correlations between SRLV sequences and the severity of diseases., SI, This work has been partially supported by the Spanish government (LE361A12-1 project and FPU13/01081 grant) and by the University of Camerino (FAR-Preziuso).
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Overexpression of ZePrx in Nicotiana tabacum Affects Lignin Biosynthesis Without Altering Redox Homeostasis

  • García Ulloa, Alba
  • Sanjurjo, Laura
  • Cimini, Sara
  • Encina García, Antonio Esteban
  • Martínez Rubio, Romina
  • Bouza, Rebeca
  • Barral, Luis
  • Estévez Pérez, Graciela
  • Novo Uzal
  • Gara de, Laura
  • Pomar, Federico
[EN] Class III plant peroxidases (Prxs) are involved in the oxidative polymerization of lignins. Zinnia elegans Jacq. Basic peroxidase (ZePrx) has been previously characterized as capable of catalyzing this reaction in vitro and the role in lignin biosynthesis of several of its Arabidopsis thaliana homologous has been previously confirmed. In the present work, ZePrx was overexpressed in Nicotiana tabacum to further characterize its function in planta with particular attention to its involvement in lignin biosynthesis. Since Prxs are known to alter ROS levels by using them as electron acceptor or producing them in their catalytic activity, the impact of this overexpression in redox homeostasis was studied by analyzing the metabolites and enzymes of the ascorbate-glutathione cycle. In relation to the modification induced by ZePrx overexpression in lignin composition and cellular metabolism, the carbohydrate composition of the cell wall as well as overall gene expression through RNA-Seq were analyzed. The obtained results indicate that the overexpression of ZePrx caused an increase in syringyl lignin in cell wall stems, suggesting that ZePrx is relevant for the oxidation of sinapyl alcohol during lignin biosynthesis, coherently with its S-peroxidase nature. The increase in the glucose content of the cell wall and the reduction of the expression of several genes involved in secondary cell wall biosynthesis suggests the occurrence of a possible compensatory response to maintain cell wall properties. The perturbation of cellular redox homeostasis occurring as a consequence of ZePrx overexpression was kept under control by an increase in APX activity and a reduction in ascorbate redox state. In conclusion, our results confirm the role of ZePrx in lignin biosynthesis and highlight that its activity alters cellular pathways putatively aimed at maintaining redox homeostasis., SI, Xunta de Galicia (Spain) (ED431C 2018/57)
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Chronology of geomorphological changes in a Cantabrian Mountain Valley over the last 20,000 years

  • Serrano Cañadas, Enrique
  • Pisabarro Pérez, Alfonso
[ES] Este es un estudio en profundidad de un depósito mixto de terraza y cono aluvial en un valle de la Cordillera Cantábrica que tiene como objetivo caracterizar las condiciones medioambientales durante el período posterior al Último Máximo Glaciar (LGM) al final del Pleistoceno y en todo el Holoceno, incluyendo la influencia humana hasta el presente. Con esta perspectiva, se han descrito litoestratigráficamente diferentes capas, se ha realizado un análisis en el campo y en el laboratorio, se ha pesado y datado mediante radiocarbono el sedimento y se han hecho otros estudios empíricos como el de paleomagnetismo. Los resultados revelan una secuencia de deposición desde alrededor de 19,4 ka BP hasta el presente mostrando diferentes ambientes sedimentarios. La literatura científica paleoclimática en áreas cercanas complementa la interpretación de los resultados p.e. glaciares pleistocenos, espeleotemas, palinología y geomorfología. Nosotros concluimos que se ha producido un comportamiento evolutivo completamente diferente de la sección estudiada en el final del Pleistoceno respecto al Holoceno. Las capas inferiores, compuestas por bloques grandes, son interpretadas en el contexto de un segundo pulso glaciar del Último Máximo Glaciar Local bajo condiciones de torrencialidad. En las capas superiores, en el Holoceno, hubo un incremento en la sedimentación procedente de las laderas a través de conos aluviales y coluviales que impidieron que el río perdiera su capacidad de transporte de estos sedimentos. En el Holoceno Medio, 5,5 ka BP, se han detectado cambios medioambientales importantes con un evidencias de acción humana. Desde ese momento se ha verificado un descenso en el calibre de las partículas del sedimento., SI, Research funded by the MECD (FPU13 / 05837) supported by the CGL2015-68144-R MINECO project and by PANGEA Research Group. Thanks to Manuel Gómez Lende, Ra- món Pellitero, Patricia Fidalgo, Alberto Me- rino, Raúl Gutiérrez, and Víctor Martínez for their help in the fieldwork.
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Structural and Bioactivity Characterization of Filipin Derivatives from Engineered Streptomyces filipinensis Strains Reveals Clues for Reduced Haemolytic Action

  • García Barreales, Eva
  • Rumbero Sánchez, Ángel
  • Diez Payero, Tamara
  • Pedro López, Antonio de
  • Jambrina Gómez, Ester
  • Aparicio Fernández, Jesús Manuel
[EN] The rise in the number of immunocompromised patients has led to an increased incidence of fungal infections, with high rates of morbidity and mortality. Furthermore, misuse of antifungals has boosted the number of resistant strains to these agents; thus, there is urgent need for new drugs against these infections. Here, the in vitro antifungal activity of filipin III metabolic intermediates has been characterized against a battery of opportunistic pathogenic fungi—Candida albicans, Candida glabrata, Candida krusei, Cryptococcus neoformans, Trichosporon cutaneum, Trichosporon asahii, Aspergillus nidulans, Aspergillus niger, and Aspergillus fumigatus—using the Clinical and Laboratory Standards Institute broth microdilution method. Structural characterization of these compounds was undertaken by mass spectrometry (MS) and nuclear magnetic resonance (NMR) following HPLC purification. Complete NMR assignments were obtained for the first time for filipins I and II. In vitro haemolytic assays revealed that the haemolytic action of these compounds relies largely on the presence of a hydroxyl function at C26, since derivatives lacking such moiety show remarkably reduced activity. Two of these derivatives, 1′-hydroxyfilipin I and filipin I, show decreased toxicity towards cholesterol-containing membranes while retaining potent antifungal activity, and could constitute excellent leads for the development of efficient pharmaceuticals, particularly against Cryptococcosis, SI, This research was funded by the Spanish Ministerio de Economía, Industria y Competitividad (grants BIO2013-42983-P and PCIN-2016-190 to J.F.A.), an FPU contract of the Ministerio de Educación, Cultura y Deporte (FPU13/01537 to A.P.), and contracts from the Junta de Castilla y León (to E.G.B.) and from the youth employment initiative (to E.J.), both co-financed by the European Social Fund
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Phosphate effect on filipin production and morphological differentiation in Streptomyces filipinensis and the role of the PhoP transcription factor

  • García Barreales, Eva
  • Diez Payero, Tamara
  • Pedro López, Antonio de
  • Aparicio Fernández, Jesús Manuel
[EN] The biosynthesis of the antifungal filipin in Streptomyces filipinensis is very sensitive to phosphate regulation. Concentrations as low as 2.5 mM block filipin production. This effect is, at least in part, produced by repression of the transcription of most filipin biosynthetic genes. The role of the two-component PhoRP system in this process was investigated. The phoRP system of S. filipinensis was cloned and transcriptionally characterised. PhoP binds to two PHO boxes present in one of its two promoters. Filipin production was greatly increased in ΔphoP and ΔphoRP mutants, in agreement with a higher transcription of the fil genes, and the effect of phosphate repression on the antibiotic production of these strains was significantly reduced. No PhoP binding was observed by electrophoretic mobility gel shift assays (EMSAs) with the promoter regions of the fil gene cluster thus suggesting an indirect effect of mutations. Binding assays with cell-free extracts from the wild-type and mutant strains on fil genes promoters revealed retardation bands in the parental strain that were absent in the mutants, thus suggesting that binding of the putative transcriptional regulator or regulators controlled by PhoP was PhoP dependent. Noteworthy, PhoP or PhoRP deletion also produced a dramatic decrease in sporulation ability, thus indicating a clear relationship between the phosphate starvation response mediated by PhoP and the sporulation process in S. filipinensis. This effect was overcome upon gene complementation, but also by phosphate addition, thus suggesting that alternative pathways take control in the absence of PhoRP, SI, This work was supported by the Spanish Ministerio de Economía, Industria y Competitividad (Grants BIO2013-42983-P and PCIN-2016-190 to JFA), and a F.P.U. contract of the Ministerio de Educación, Cultura y Deporte (FPU13/01537 to AP)
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Promoter Engineering Reveals the Importance of Heptameric Direct Repeats for DNA Binding by Streptomyces Antibiotic Regulatory Protein–Large ATP-Binding Regulator of the LuxR Family (SARP-LAL) Regulators in Streptomyces natalensis

  • García Barreales, Eva
  • Morgado Vicente, Cláudia Sofia
  • Pedro López, Antonio de
  • Santos Aberturas, Javier
  • Aparicio Fernández, Jesús Manuel
[EN] The biosynthesis of small-size polyene macrolides is ultimately controlled by a couple of transcriptional regulators that act in a hierarchical way. A Streptomyces antibiotic regulatory protein–large ATP-binding regulator of the LuxR family (SARP-LAL) regulator binds the promoter of a PAS-LuxR regulator-encoding gene and activates its transcription, and in turn, the gene product of the latter activates transcription from various promoters of the polyene gene cluster directly. The primary operator of PimR, the archetype of SARP-LAL regulators, contains three heptameric direct repeats separated by four-nucleotide spacers, but the regulator can also bind a secondary operator with only two direct repeats separated by a 3-nucleotide spacer, both located in the promoter region of its unique target gene, pimM. A similar arrangement of operators has been identified for PimR counterparts encoded by gene clusters for different antifungal secondary metabolites, including not only polyene macrolides but peptidyl nucleosides, phoslactomycins, or cycloheximide. Here, we used promoter engineering and quantitative transcriptional analyses to determine the contributions of the different heptameric repeats to transcriptional activation and final polyene production. Optimized promoters have thus been developed. Deletion studies and electrophoretic mobility assays were used for the definition of DNA-binding boxes formed by 22-nucleotide sequences comprising two conserved heptameric direct repeats separated by four-nucleotide less conserved spacers. The cooperative binding of PimRSARP appears to be the mechanism involved in the binding of regulator monomers to operators, and at least two protein monomers are required for efficient binding, SI, This work was supported by the Spanish Ministerio de Economía, Industria y Competitividad (grants BIO2013-42983-P and PCIN-2016-190 to J.F.A.), an F.P.U. contract of the Ministerio de Educación, Cultura y Deporte (FPU13/01537 to A.D.P.), and a contract from the Junta de Castilla y León cofinanced by the European Social Fund (to E.G.B.).
Docta Complutense
Publication Artículo científico (JournalArticle)

The route of Besnoitia besnoiti tachyzoites inoculation does not influence the clinical outcome of the infection in calves

  • Diezma Díaz, Carlos
  • Ferré Pérez, Ignacio
  • Re, Michela Tatiana
  • Jiménez Meléndez, Alejandro
  • Tabanera De Lucio, Enrique
  • González Huecas, Marta
  • Pizarro Díaz, Manuel
  • Yanguas Pérez, D.
  • Brum, P. L.
  • Blanco Murcia, Francisco Javier
  • Ortega Mora, Luis Miguel
  • Álvarez García, Gema
In a previous attempt, an experimental model of bovine besnoitiosis was established in calves that were intravenously inoculated with different doses of Besnoitia besnoiti tachyzoites. Despite the fact that all infected calves developed the acute stage of disease, only microscopic findings characteristic of chronic besnoitiosis were reported. In the present study, calves were inoculated by subcutaneous and intradermal routes with B. besnoiti tachyzoites with the aim of developing clinical signs and macroscopic lesions characteristic of chronic besnoitiosis. Nine 3-month-old male calves were randomly distributed into three groups of three animals each. Next, 10⁶ tachyzoites were inoculated by either the subcutaneous (G1) or intradermal route (G2). The negative control group (G3) was inoculated with PBS. Daily clinical monitoring and regular blood collection were performed. At 70 days post-infection (pi), animals were euthanized, and tissues were collected to investigate lesions and parasites. Infected animals developed mild-moderate acute besnoitiosis characterized by lymphadenopathy from four days to 47 days pi, and sporadic fever peaks were only observed in one calf from G2. However, other clinical signs and macroscopic lesions characteristic of chronic besnoitiosis were not detected. Only nine tissue samples were B. besnoiti-DNA-positive, eight of which belonged to reproductive and respiratory tracts tissues from G1. Finally, the kinetics of the immune responses were similar in both infected groups. However, delayed and lower cellular and humoral immune responses were observed in G1 followed by G2 and were compared with intravenously inoculated calves. The differences observed among the three inoculation routes could be due to different effector mechanisms of the host early innate immune response against B. besnoiti. Accordingly, the inoculation route of B. besnoiti tachyzoites does not significantly influence the clinical outcome of the infection in calves. Thus, a further refinement of this experimental model of bovine besnoitiosis is needed to reproduce macroscopic lesions characteristic of chronic stage disease.
Docta Complutense
Publication Artículo científico (JournalArticle)

Vultures and Livestock: The Where, When, and Why of Visits to Farms

  • García Alfonso, Marina
  • Van Overveld, Thijs
  • Gangoso De La Colina, Laura Esther
  • Serrano, David
  • Donázar, José A.
Recent changes in European legislation have legalized the abandonment of carcasses around livestock farms, but our understanding of how vultures exploit these semi-predictable food sources is still very limited. For filling this gap, we determine the individual and ecological drivers influencing vulture visits to farms. We assessed the effects of individual characteristics of both birds and farms on the frequency of vultures’ visits to livestock facilities using data collected from 45 GPS-tagged Egyptian Vultures (Neophron percnopterus) and 318 farms (>94% of livestock) on Fuerteventura Island, Spain. Farms were more visited during the vultures’ breeding season. Farms located closer to highly predictable feeding places (i.e., vulture restaurants and garbage dumps) or with more available feeding resources were visited by more vultures, whereas those located close to roads and vultures’ breeding territories received fewer visits. Younger territorial birds visited a farm more frequently than older territorial ones, whereas older non-territorial individuals concentrated those visits on farms closer to their activity core areas compared with younger ones. Our findings indicate that visits to farms were determined by their spatial distribution in relation to the age-specific birds’ activity centers, the availability of carcasses, seasonality, and individual characteristics of vultures. These interacting factors should be considered in vulture conservation, avoiding very general solutions that ignore population structure.
Docta Complutense
Publication Artículo científico (JournalArticle)

Evaluating European LIFE conservation projects: Improvements in survival of an endangered vulture

  • Adrià Badia‐Boher, Jaume
  • Sanz Aguilar, Ana
  • De la Riva, Manuel
  • Gangoso De La Colina, Laura Esther
  • Van Overveld, Thijs
  • García Alfonso, Marina
  • Luzardo, Octavio P.
  • Suarez Pérez, Alejandro
  • Donázar, José Antonio
Long-lived avian scavengers are threatened worldwide and thus, are common targets of conservation plans. However, scientific evidence of both the factors limiting populations and effectiveness of management actions are greatly needed in order to develop more efficient and successful conservation strategies. We assessed the effectiveness of conservation actions applied within a LIFE-Nature project aimed at improving the long-term survival of the critically endangered Canarian Egyptian vulture: including education campaigns for public awareness and control of illegal poisoning and the modification of power lines to reduce the risk of accidents. We formulated a multievent capture–mark–recapture model to obtain estimates of survival for juvenile, subadult and adult birds accounting for probabilities of resight, recovery and losses of metal and colour rings. Models supported a substantial enhancement in survival for subadult and adult birds and a moderate improvement for juveniles after the implementation of LIFE actions. Ring loss probabilities became notably high in the middle to long term. Poisoning events became very rare after LIFE was implemented, suggesting a positive effect of environmental education and awareness campaigns. Entanglements and collisions in power lines were also efficiently mitigated. Instead, electrocutions became the most identified cause of death in the post-LIFE stage. Synthesis and applications. Our results highlight the improvement of survival in a threatened island vulture population after the implementation of a European LIFE conservation project. On small islands, with small human populations and few stakeholders, education and awareness campaigns can be especially effective for biodiversity conservation. We also demonstrate the need to complement conservation programmes with long-term monitoring, which is essential to evaluate the effectiveness of actions, especially for long-lived species.
Docta Complutense
Publication Artículo científico (JournalArticle)

Probing into farmers’ perceptions of a globally endangered ecosystem service provider

  • García Alfonso, Marina
  • Morales Reyes, Zebensui
  • Gangoso De La Colina, Laura Esther
  • Bouten, Willem
  • Sánchez Zapata, José A.
  • Serrano, David
  • Donázar, José A.
Society’s perception of ecosystem services is a key issue in conservation, particularly for endangered species providing services linked to human activities. Misperceptions may lead to wildlife–human conflicts with the risk of disappearance of the species involved. We contrasted farmers’ perceptions with highly accurate quantitative data of an endangered vulture species, which provide ecosystem services. We combined surveys of 59 farmers with data from 48 GPS-tagged Canarian Egyptian vultures (Neophron percnopterus majorensis endemic to the Spanish Canary Islands) to disentangle factors influencing consistency between farmers’ awareness of vulture occurrence on their properties and vulture behavior. Egyptian vultures were perceived as the main providers of scavenging services and the most beneficial avian scavenger. Consistency between farmers’ perceptions (surveys) and vulture use of their farms (GPS data) was higher in the morning, in older males, and at farms with lower livestock numbers, located near vulture communal roosts, and visited more frequently by vultures. Our results underline the potential influence of modern livestock husbandry in disconnecting people from ecosystems, and how appreciation could be even lower for scarce or threatened ecosystem service providers.
Docta Complutense
Publication Artículo científico (JournalArticle)

Seasonal grouping dynamics in a territorial vulture: ecological drivers and social consequences

  • Van Overveld, Thijs
  • Gangoso De La Colina, Laura Esther
  • García Alfonso, Marina
  • Bouten, Willem
  • Riva, Manuel de la
  • Donázar, José Antonio
Despite widespread occurrence of seasonal sociality among animals, little is still known about the social drivers and population-level social implications of seasonal grouping behaviours, especially in birds. Here, we studied the combined effects of ecological and social factors on seasonal grouping patterns in a sedentary population of Egyptian vultures living on the Eastern Canary Islands. We focussed on the social significance of large-scale gatherings taking place outside the breeding season at a highly preferred feeding station and a nearby temporary roost. Group sizes at this feeding patch followed a strong seasonal pattern characterized by distinct monthly changes in group composition, according to sex, age and territorial status. In between reproductive periods, vulture numbers at the feeding station may reach up 50% of the total population on a single day. GPS-tracking showed that this increase in vulture numbers was in part due to a shift in foraging range towards the centre of Fuerteventura by low-ranked territorial birds breeding in remote areas. During this period, vultures may spend on average 30% of their monthly time in a social gatherings context, depending on social status. We show that seasonal grouping patterns are shaped by the complex interplay between ecological factors (reproductive constraints, resource seasonality, food predictability), age-specific traits and social competitive processes, while social attraction may be an important additional component. We propose that for facultative social foragers living in highly despotic territorial systems, collective foraging may be of particular relevance regarding the development of hierarchical social relations and maintenance of population-level social cohesion.
Docta Complutense
Publication Artículo científico (JournalArticle)

Treatment of Toxoplasmosis and Neosporosis in Farm Ruminants: State of Knowledge and Future Trends

  • Sánchez Sánchez, Roberto
  • Vázquez Arbáizar, María Patricia
  • Ferré Pérez, Ignacio
  • Ortega Mora, Luis Miguel
Toxoplasmosis and neosporosis are closely related protozoan diseases that lead to important economic impacts in farm ruminants. Toxoplasma gondii infection mainly causes reproductive failure in small ruminants and is a widespread zoonosis, whereas Neospora caninum infection is one of the most important causes of abortion in cattle worldwide. Vaccination has been considered the most economic measure for controlling these diseases. However, despite vaccine development efforts, only a liveattenuated T. gondii vaccine has been licensed for veterinary use, and no promising vaccines against neosporosis have been developed; therefore, vaccine development remains a key goal. Additionally, drug therapy could be a valuable strategy for disease control in farm ruminants, as several drugs that limit T. gondii and N. caninum proliferation and dissemination have been evaluated. This approach may also be relevant to performing an initial drug screening for potential human therapy for zoonotic parasites. Treatments can be applied against infections in adult ruminants to minimize the outcomes of a primo-infection or the reactivation of a chronic infection during gestation or in newborn ruminants to avoid infection chronification. In this review, the current status of drug development against toxoplasmosis and neosporosis in farm ruminants is presented, and in an effort to promote additional treatment options, prospective drugs that have shown efficacy in vitro and in laboratory animal models of toxoplasmosis and neosporosis are examined.
RIUMA. Repositorio Institucional de la Universidad de Málaga
Publication Artículo científico (JournalArticle)

ZSM-5-decorated CuO/ZnO/ZrO2 fibers as efficient bifunctional catalysts for the direct synthesis of DME from syngas.

  • Palomo-Jiménez, José
  • Rodríguez-Cano, Miguel Ángel
  • Rodríguez-Mirasol, José
  • Cordero-Alcántara, Tomás
https://openpolicyfinder.jisc.ac.uk/id/publication/11129?from=single_hit, CuO/ZnO/ZrO2-ZSM-5 fibrillar bifunctional catalysts, with a mean diameter of 1.5 μm, were prepared in flexible non-woven mats. The use of electrospinning technique allowed obtaining, in only one step, both a high Cu dispersion on the surface of the ZrO2 fibers and well-dispersed zeolite aggregates, with a mean size of 300 nm, decorating the CuO/ZnO/ZrO2 fiber surfaces. These fibers, without further modifications, were very efficient as catalysts for the direct synthesis of DME from syngas in a packed-bed reactor (low pressure drop and enhanced mass and heat transfer). The catalytic activity was well-correlated with the physicochemical properties of the catalysts. The enhanced interaction between the two active phases involved in the direct syngas-to-DME process gave rise to high CO conversions and selectivity to DME values, even when working with a syngas presenting a low H2/CO ratio, such as that obtained from biomass gasification., Spanish Ministry of Economy and Competitiveness, Spanish Ministry of Sciences Innovation and Universities, European Regional Development Fund (ERDF), Spanish Ministry Education
RIUMA. Repositorio Institucional de la Universidad de Málaga
Publication Artículo científico (JournalArticle)

On the kinetics of methanol dehydration to dimethyl ether on Zr-loaded P-containing mesoporous activated carbon catalyst.

  • Palomo-Jiménez, José
  • Rodríguez-Cano, Miguel Ángel
  • Rodríguez-Mirasol, José
  • Cordero-Alcántara, Tomás
https://openpolicyfinder.jisc.ac.uk/publication/16515, Selective methanol dehydration to DME has been investigated using activated carbon-based catalysts. An activated carbon was prepared by chemical activation of olive stones, a residue of the agri-food industry, with phosphoric acid followed by Zr loading (5% (w/w)). The activation process produced a considerable amount of chemically stable surface phosphorus complexes. The addition of Zr resulted in the formation of zirconium phosphate surface species, as revealed by XPS. TPD and catalytic reaction results determined that the presence of zirconium phosphate species bonded to the carbon surface were responsible for the high steady-state methanol conversion and DME selectivity achieved by this biomass-derived catalyst. A kinetic study for the selective methanol dehydration to DME was carried out on the Zr-loaded P-containing activated carbon catalyst and the corresponding kinetic and thermodynamic parameters were obtained. The reaction seems to proceed through a modified Langmuir-Hinshelwood mechanism (LH2), in which two methanol molecules are subsequently adsorbed on one active site. The competitive adsorption of water on the active sites was also addressed in the proposed mechanism. The activation energy for the DME production was calculated and a value of 70 kJ mol-1 was obtained., Spanish Ministry of Economy and Competitiveness, European Regional Development Fund (ERDF), Spanish Ministry Education
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Alpha band disruption in the AD-continuum starts in the subjective cognitive decline stage: a MEG study

  • López Sanz, D.
  • Bruña, R.
  • Garcés, P.
  • Cámara Núñez, María Carmen
  • Serrano, N.
  • Rodríguez Rojo, I. C.
  • Delgado, M. L.
  • Montenegro, M.
  • López Higes, R.
  • Yus, M.
  • Maestu, F.
The consideration of Subjective Cognitive Decline (SCD) as a preclinical stage of AD remains still a matter of debate. Alpha band alterations represent one of the most significant changes in the electrophysiological profile of AD. In particular, AD patients exhibit reduced alpha relative power and frequency. We used alpha band activity measured with MEG to study whether SCD and MCI elders present these electrophysiological changes characteristic of AD, and to determine the evolution of the observed alterations across AD spectrum. The total sample consisted of 131 participants: 39 elders without SCD, 41 elders with SCD and 51 MCI patients. All of them underwent MEG and MRI scans and neuropsychological assessment. SCD and MCI patients exhibited a similar reduction in alpha band activity compared with the no SCD group. However, only MCI patients showed a slowing in their alpha peak frequency compared with both SCD and no SCD. These changes in alpha band were related to worse cognition. Our results suggest that AD-related alterations may start in the SCD stage, with a reduction in alpha relative power. It is later, in the MCI stage, where the slowing of the spectral profile takes place, giving rise to objective deficits in cognitive functioning., This study was supported by two projects from the Spanish Ministry of Economy and Competitiveness, PSI2009-14415-C03-01 and PSI2012-38375-C03-01, a predoctoral fellowship from the Ministry of Economy and Competitiveness to DLS (PSI2012-38375-C03-01), and three predoctoral fellowships from the Ministry of Education to RB,NS,ICRR (FPU13/06009, FPU14/07164, FPU13/02064).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Equivalence of Adiabatic and DeWitt-Schwinger renormalization schemes

  • Del Río Vega, Adrián
  • Navarro Salas, José
We prove that adiabatic regularization and DeWitt-Schwinger point-splitting provide the same result when renormalizing expectation values of the stress-energy tensor for spin-1/2 fields. This generalizes the equivalence found for scalar fields, which is here recovered in a different way. We also argue that the coincidence limit of the DeWitt-Schwinger proper time expansion of the two-point function agrees exactly with the analogous expansion defined by the adiabatic regularization method at any order (for both scalar and spin-1/2 fields). We also illustrate the power of the adiabatic method to compute higher order DeWitt coefficients in Friedmann-Lemaître-Robertson-Walker Universes., This work is supported by the Research Project of the Spanish MINECO FIS2011-29813-C02-02, and the Consolider Program No. CPANPHY-1205388. A. D. is supported by the Spanish Ministry of Education Ph.D. fellowship FPU13/04948.
Repositorio Digital de la UPF
Publication Contribución de congreso (ConferenceOutput)

From emotions to action units with hidden and semi-hidden-task learning

  • Ruiz, Adrià
  • Van de Weijer, Joost
  • Binefa i Valls, Xavier
Comunicació presentada a: IEEE International Conference on Computer Vision (ICCV 2015) celebrat a Santiago, Xile, de l'11 al 18 de desembre de 2015., Limited annotated training data is a challenging problem in Action Unit recognition. In this paper, we investigate how the use of large databases labelled according to the 6 universal facial expressions can increase the generalization ability of Action Unit classifiers. For this purpose, we propose a novel learning framework: Hidden-Task Learning. HTL aims to learn a set of Hidden-Tasks (Action Units) for which samples are not available but, in contrast, training data is easier to obtain from a set of related Visible- Tasks (Facial Expressions). To that end, HTL is able to exploit prior knowledge about the relation between Hidden and Visible-Tasks. In our case, we base this prior knowledge on empirical psychological studies providing statistical correlations between Action Units and universal facial expressions. Additionally, we extend HTL to Semi-Hidden Task Learning (SHTL) assuming that Action Unit training samples are also provided. Performing exhaustive experiments over four different datasets, we show that HTL and SHTL improve the generalization ability of AU classifiers by training them with additional facial expression data. Additionally, we show that SHTL achieves competitive performance compared with state-of-the-art Transductive Learning approaches which face the problem of limited training data by using unlabelled test samples during training., This paper is part of a project that has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 645012. Adria Ruiz and Xavier Binefa would also like to acknowledge Spanish Government to provide support under grants CICYT TIN2012-39203 and FPU13/01740. Joost van de Weijer acknowledges Project TIN2013-41751 of the Spanish Ministry of Science and the Generalitat de Catalunya Project under Grant 2014-SGR-221.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Aprendizaje autónomo del estudiante apoyado en recursos audiovisuales en el contexto de un Grado de Ingeniería Informática: experiencias con metodologías de enseñanza activas

  • Vallejo, Enrique
  • Fuentes, Pablo
  • Benito, Mariano
[EN] The course Introduction to Computer Networks from the University of Cantabria has a low success, with complaints about the lack of sufficient practical classes that reinforce the theoretical contents. An innovation project has been developed to develop a set of multimedia materials that replace some master classes and increase the amount of practical sessions, following a flipped classroom model. Specifically, six videos have been developed, each of them accompanied by a self-learning activity, and an associated practical session. Such sessions followed approximately a Problem-Based Learning approach. The impact of the project has been evaluated, on the motivation, withdrawal and academic results. The response of the students is positive, with a slightly increase in the classroom attendance. Students indicate that they prefer this type of learning. However, monitoring tools show that activity attendance is significantly lower than expected. Academic results show a rate of student withdrawal similar to previous years, but a slightly higher rate of students passing the course. Overall, the results of the project is very positive, given the increased student motivation, and a similar approach will be considered in forthcoming courses., [ES] La asignatura Introducción a las Redes de Computadores de la Universidad de Cantabria presenta un rendimiento bajo, con queja de la falta de clases prácticas que refuercen los contenidos teóricos. Para atacar el problema, se ha desarrollado un conjunto de materiales audiovisuales que reemplacen algunas de las clases teóricas y aumenten la cantidad de sesiones prácticas en el aula siguiendo un modelo de flipped classroom. En concreto, se han desarrollado seis vídeos para el auto-aprendizaje por parte del alumno, acompañados de tests de autoevaluación y de seis sesiones prácticas en el aula. En dichas sesiones, se ha seguido aproximadamente una metodología de aprendizaje basado en problemas. Se ha evaluado el impacto del proyecto sobre la motivación, seguimiento y resultados del alumnado. La respuesta del alumnado al cambio metodológico es positivo, aumentándose ligeramente la asistencia a clase y seguimiento de la asignatura. Sin embargo, el seguimiento de los recursos es mucho más bajo de lo esperado. Los resultados académicos muestran una tasa de alumnos presentados similar a la de cursos previos, pero una tasa de aprobados ligeramente superior. Globalmente, el resultado del proyecto es muy positivo, y plantea seguirse un esquema similar en cursos posteriores., Este proyecto está apoyado por la III Convocatoria de Proyectos de Innovación Docente del Vicerrectorado de Profesorado de la Universidad de Cantabria y por el Ministerio de Economía, Industria y Competitividad bajo el contrato TIN2016-76635-C2-2-R (AEI/FEDER, UE). Pablo Fuentes está financiado por el Ministerio de Educación, Cultura y Deporte, beca FPU13/00337.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Microwave Signal Processing over Multicore Fiber

  • García-Cortijo, Sergi|||0000-0002-7237-9457
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Gasulla Mestre, Ivana|||0000-0001-8088-7796
  • Hervás-Peralta, Javier
[EN] We review the introduction of the space dimension into fiber-based technologies to implement compact and versatile signal processing solutions for microwave and millimeter wave signals. Built upon multicore fiber links and devices, this approach allows the realization of fiber-distributed signal processing in the context of fiber-wireless communications, providing both radiofrequency access distribution and signal processing in the same fiber medium. We present different space-division multiplexing architectures to implement tunable true time delay lines that can be applied to a variety of microwave photonics functionalities, such as signal filtering, radio beamsteering in phased array antennas or optoelectronic oscillation. In particular, this paper gathers our latest work on the following multicore fiber technologies: dispersion-engineered heterogeneous multicore fiber links for distributed tunable true time delay line operation; multicavity devices built upon the selective inscription of gratings in homogenous multicore fibers for compact true time delay line operation; and multicavity optoelectronic oscillation over both homogeneous and heterogeneous multicore fibers., This research was supported by the ERC Consolidator Grant 724663; the Spanish Projects TEC2015-62520-ERC, TEC2014-60378-C2-1-R and TEC2016-80150-R; the Valencian Research Excellency Award Program GVA PROMETEO 2013/012; the Spanish MECD FPU Scholarship (FPU13/04675) for J. Hervás; the Spanish scholarships MINECO BES-2015-073359 for S. García; and the Spanish MINECO Ramon y Cajal program RYC-2014-16247 for I. Gasulla.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Interrogation of a Sensor Array of Identical Weak FBGs using Dispersive Incoherent OFDR

  • Clement, Juan
  • Torregrosa, German
  • Hervás-Peralta, Javier
  • Fernandez-Pousa, Carlos R.
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] Incoherent Optical Fourier-Domain Reflectometry incorporating a dispersive delay line is used for the interrogation of an array of three identical fiber Bragg gratings with a Bragg wavelength of 1552.81 nm, reflectivity of 19.3 dB and 10-cm separation. The dispersive delay line induces different delays in the wavelengths reflected by each grating, thus being sensitive to Bragg wavelength shifts. Compared with conventional incoherent Optical Fourier-Domain Reflectometry, dispersive effects decrease the spatial resolution, which in our experiments reached a value of 1.2 cm in fiber at a measurement bandwidth of 10 GHz. As a quasi-distributed temperature sensor, the array shows an accuracy of ±0.5ºC for temperatures up to 100ºC, and an estimated total measurement range of 540ºC. Tradeoffs between bandwidth, scan time, dispersion-dependent spatial resolution, and accuracy, are also analyzed., This work was supported in part by the Generalitat Valenciana, Valencia, within the Research Excellency Award through the GVA PROMETEO Program under Grant 2013/012 and in part by the Ministerio de Economia y Competitividad under Project TEC201-60378-C2-1-R. The work of J. Hervas was supported by the Ministerio de Educacion, Cultura y Deporte through the Formacion Profesorado Scholarship (FPU13/04675).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Non-Destructive Assessment of Mango Firmness and Ripeness Using a Robotic Gripper

  • Blanes Campos, Carlos|||0000-0003-1977-7429
  • Ortiz Sánchez, María Coral|||0000-0002-2744-6964
  • Mellado, Martin|||0000-0002-3429-5316
  • Talens Oliag, Pau|||0000-0001-7318-3336
  • Cortés López, Victoria
[EN] The objective of the study was to evaluate the use of a robot gripper in the assessment of mango (cv. BOsteen^) firmness as well as to establish relationships between the nondestructive robot gripper measurements with embedded accelerometers in the fingers and the ripeness of mango fruit. Intact mango fruit was handled and manipulated by the robot gripper, and the major physicochemical properties related with their ripening index were analyzed. Partial least square regression models (PLS) were developed to explain these properties according to the variables extracted from the accelerometer signals. Correlation coefficients of 0.925, 0.892, 0.893, and 0.937 with a root-mean-square error of prediction of 2.524 N/ mm, 1.579 °Brix, 3.187, and 0.517, were obtained for the prediction of fruit mechanical firmness, total soluble solids, flesh luminosity, and ripening index, respectively. This research showed that it is possible to assess mango firmness and ripeness during handling with a robot gripper., The authors thanks MANI-DACSA projects (ref. RTA2012-00062-C04-02 and RTA2012-00062-C04-03), Spanish Government (Ministerio de Economia y Competitividad), AICO/2015/122 project, Conselleria de Educacion, Cultura y Deporte, Generalitat Valenciana and PAID-05-11-2745 project, Vicerectorat d'Investigacio, Universitat Politecnica de Valencia. Victoria Cortes thanks Spanish Ministerio de Educacion, Cultura y Deporte for a FPU grant (FPU13/04202).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Long-term properties and end-of-life of polymers from renewable resources

  • Badia, J.D.
  • Gil-Castell, O.
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] The long-term properties and end-of-life of polymers are not antagonist issues. They actually are inherently linked by the duality between durability and degradation. The control of the service-todisposal pathway at useful performance, along with low-impact disposal represents an added-value. Therefore, the routes of design, production, and discarding of bio-based polymers must be carefully strategized. In this sense, the combination of proper valorisation techniques, i.e. material, energetic and/ or biological at the most appropriate stage should be targeted. Thus, the consideration of the end-of-life of a material for a specific application, instead of the end-of-life of a material should be the fundamental focus. This review covers the key aspects of lab-scale techniques to infer the potential of performance and valorisation of polymers from renewable resources as a key gear for sustainability., The authors acknowledge the European Funds of Regional Development and the Spanish Ministry of Economy and Competitiveness for the projects POLYCELL (ENE2014-53734-C2-1-R) and TETRA-SEC (UPOV13-3E-1947). Generalitat Valenciana is recognized for the BIOARMED project (APOSTD/2014/041) for J.D. Badia. The Spanish Ministry of Education, Culture and Sports is thanked for the FPU grant of O. Gil-Castell (FPU13/01916). J.D. Badia wants to dedicate this article to his wife Mireia, for her peaceful dedication and joyful love.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Functionalised Poly(Vinyl Alcohol)/Graphene Oxide as Polymer Composite Electrolyte Membranes

  • Gil Castell, Óscar
  • Cerveró, R.
  • Badia, J. D.
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] Crosslinked poly(vinyl alcohol) (PVA) based composite films were prepared as polyelectrolyte membranes for low temperature direct ethanol fuel cells (DEFC). The membranes were functionalised by means of the addition of graphene oxide (GO) and sulfonated graphene oxide (SGO) and crosslinked with sulfosuccinic acid (SSA). The chemical structure was corroborated and suitable thermal properties were found. Although the addition of GO and SGO slightly decreased the proton conductivity of the membranes, a significant reduction of the ethanol solution swelling and crossover was encountered, more relevant for those functionalised with SGO. In general, the composite membranes were stable under simulated service conditions. The addition of GO and SGO particles permitted to buffer the loss and almost retain similar proton conductivity than prior to immersion. These membranes are alternative polyelectrolytes, which overcome current concerns of actual commercial membranes such as the high cost or the crossover phenomenon., The authors would like to thank the support of the European Union through the European Regional Development Funds (ERDF). The Spanish Ministry of Economy, Industry and Competitiveness, is thanked for the research project POLYDECARBOCELL (ENE2017-86711-C3-1-R). The Spanish Ministry of Education, Culture and Sports is thanked for the FPU grant for O. Gil-Castell (FPU13/01916).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Eukaryotic Initiation Factor 5A2 localizes to actively translating ribosomes to promote cancer cell protrusions and invasive capacity

  • Martínez-Férriz, Arantxa|||0000-0001-7193-2575
  • Ferrando Monleón, Alejandro Ramón|||0000-0002-1903-9111
  • Gandía, Carolina
  • Pardo-Sánchez, José Miguel
  • Fathinajafabadi, Alihamze
  • Farras, Rosa
[EN] Background Eukaryotic Initiation Factor 5A (eIF-5A), an essential translation factor, is post-translationally activated by the polyamine spermidine. Two human genes encode eIF-5A, being eIF5-A1 constitutively expressed whereas eIF5-A2 is frequently found overexpressed in human tumours. The contribution of both isoforms with regard to cellular proliferation and invasion in non-small cell lung cancer remains to be characterized. Methods We have evaluated the use of eIF-5A2 gene as prognosis marker in lung adenocarcinoma (LUAD) patients and validated in immunocompromised mice. We have used cell migration and cell proliferation assays in LUAD lines after silencing each eIF-5A isoform to monitor their contribution to both phenotypes. Cytoskeleton alterations were analysed in the same cells by rhodamine-phalloidin staining and fluorescence microscopy. Polysome profiles were used to monitor the effect of eIF-5A2 overexpression on translation. Western blotting was used to study the levels of eIF-5A2 client proteins involved in migration upon TGFB1 stimulation. Finally, we have co-localized eIF-5A2 with puromycin to visualize the subcellular pattern of actively translating ribosomes. Results We describe the differential functions of both eIF-5A isoforms, to show that eIF5-A2 properties on cell proliferation and migration are coincident with its features as a poor prognosis marker. Silencing of eIF-5A2 leads to more dramatic consequences of cellular proliferation and migration compared to eIF-5A1. Overexpression of eIF5A2 leads to enhanced global translation. We also show that TGF ss signalling enhances the expression and activity of eIF-5A2 which promotes the translation of polyproline rich proteins involved in cytoskeleton and motility features as it is the case of Fibronectin, SNAI1, Ezrin and FHOD1. With the use of puromycin labelling we have co-localized active ribosomes with eIF-5A2 not only in cytosol but also in areas of cellular protrusion. We have shown the bulk invasive capacity of cells overexpressing eIF-5A2 in mice. Conclusions We propose the existence of a coordinated temporal and positional interaction between TFGB and eIF-5A2 pathways to promote cell migration in NSCLC. We suggest that the co-localization of actively translating ribosomes with hypusinated eIF-5A2 facilitates the translation of key proteins not only in the cytosol but also in areas of cellular protrusion., This work was supported by: Fondo de Investigacion Sanitaria, ISCIII, grant number PI20-194, co-funded by ERDF/ESF, "Investing in your future". Ministerio de Educacion, Cultura y Deporte grant FPU13/02755 for JMPS. Asociacion Espanola contra el Cancer, AECC predoctoral grant for AMF. Part of the equipment employed in this work has been funded by Generalitat Valenciana and co-financed with ERDF funds (OP ERDF of Comunitat Valenciana 2014-2020). This article is based upon work from COST Action CA20113 ProteoCure, supported by COST (European Cooperation in Science and Technology).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dielectric spectroscopy of novel thiol-ene/epoxy thermosets obtained from allyl-modified hyperbranched poly(ethyleneimine) and diglycidylether of bisphenol A

  • Badia, J.D.
  • Acebo, C.
  • Gil-Castell, O.
  • Serra, A.
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] Dielectric Thermal Analysis (DETA) of a series of new thermoset obtained by click chemistry was performed. The new thermosets were obtained by a dual-curing process consisting in a first photochemical thiol-ene, followed by a thermal thiol-epoxy starting from an allyl-terminated hyperbranched poly(ethyleneimine) (HBPEI) and different proportions of diglycidylether of bisphenol A (DGEBA) and the corresponding stoichiometric proportions of pentaerythritol tetrakis (3-mercaptopropionate, PETMP). The dielectric behaviour was obtained experimentally supressing the conductive effects. Two sub-Tg intramolecular non-cooperative gamma and beta relaxations and an intermolecular cooperative alpha-relaxation were detected. The gamma-relaxation was ascribed to the dipole orientation of the terminal thiol groups. Two gamma relaxations gamma(epo) and gamma(ene) were observed, according to the influence of the surroundings. Only thermosets with a content of flexible HBPEI/PETMP domains higher than a 50% w/w showed the gamma(ene) relaxation at lower temperatures and higher frequencies. The beta-relaxation was a non-Johari-Goldstein relaxation, ascribed to the dipole transfer of the linear -CH2-O-(C=O)-CH2-CH2- groups of the thiol constrained in the glassy state. The alpha-relaxation was ascribed to the long-term segmental movements of the thermosets, occurring during the transition from the glassy to the rubbery stage. A synergic effect of reducing the rigidity and compactness of the thermosets by the reduction of aromatic moieties of the DGEBA/PETMP units, and the increase of the flexibility induced by the addition of HBPEI/PETMP units affected the macromolecular movement of the thermosets., European Regional Development Funds and the Spanish Ministry of Science, Innovation and Universities for ENE2017-86711-C3-1-R, MAT2017-82849-C2-1-R, ENE2014-53734-C2-1-R, UPOV13-3E-1947 and projects. Ministry of Education for the FPU13/01916) for O. Gil-Castell. Generalitat de Catalunya for the 2017-SGR-77 project. Generalitat Valenciana for the APOSTD14/041 for JD Badia and GRISOLIA/2012/003 for R. Teruel-Juanes.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Application of near infrared spectroscopy to the quality control of citrus fruits and mango

  • Blasco Ivars, José
  • Lorente Garrido, Delia
  • Cortes-Lopez, Victoria
  • Cubero-García, Sergio
  • Munera Picazo, Sandra Maria
  • Talens Oliag, Pau|||0000-0001-7318-3336
  • Aleixos Borrás, María Nuria|||0000-0001-6051-3375
This work has been partially funded by INIA through research projects RTA2012-00062-C04-01 and RTA2012-00062-C04-03 with the support of FEDER funds and by GVA through the project AICO/2015/122. S. Munera thanks INIA for the grant FPI-INIA #43 (CPR2014-0082) partially supported by FSE. V. Cortés thanks the MEC for the FPU grant FPU13/04202.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fast Incoherent OFDR Interrogation of FBG Arrays Using Sparse Radio Frequency Responses

  • Clement, J.
  • Hervás-Peralta, Javier
  • Maestre, H
  • Torregrosa, G.
  • Fernandez-Pousa, Carlos R.
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] We present two implementations of fast, discrete incoherent optical frequency-domain reflectometers (I-OFDR) for the interrogation of equally spaced fiber Bragg grating (FBG) arrays, based on the determination of the array's radio frequency (RF) response at a sparse number of frequencies. FBG reflectivities are determined by use of the inverse discrete Fourier transform (IDFT) of the sparse RF response, in a dynamic range limited by crosstalk induced by FBG positioning errors. The first implementation employs the complete, vector RF response at a number of frequencies equal to the number N of FBGs in the array. In the second, the introduction of a reference reflector allows for an interrogation using the power (phaseless) RF response in 4N - 1 frequencies. Demodulation based on IDFT leads to total interrogation times determined by the network analyzer scan time, which can be as low as 10 mu s per FBG. Depending on the interrogation technique, electrical bandwidth requirements are 12 GHz in our array with 10-cm separation. We implemented both techniques in a N = 10 array, inducing decays in reflectivity by 10 dB in one or several FBGs. Unambiguous detection of FBG decays was obtained in both interrogation methods. Additional tests performed on the measured reflectivities also show that measurement linearity is preserved in the 10-dB decay range. As discrete I-OFDR systems, the proposed techniques show the possibility to reach compromises between interrogation time and dynamic range or accuracy in reflectivity measurements, using the number of interrogation frequencies and the sensor topology., This work was supported in part by Infraestructura GVA-FEDER operative program 2007-2013 and in part by the Spanish MINECO through Project TEC2017-88029-R. The work of J. Clement Bellido was supported by the GVA VALi+d scholarship ACIF/2016/214. The work of J. Hervas was supported by the Spanish MEC scholarship FPU13/04675.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Computational optimization of the combustion system of a heavy duty direct injection diesel engine operating with dimethyl-ether

  • Benajes, Jesús|||0000-0002-1653-9188
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Pastor Enguídanos, José Manuel|||0000-0003-4458-0353
  • Hernández-López, Alberto
  • Kokjohn, Sage L.
[EN] A genetic algorithm optimization methodology is applied to the design of the combustion system of a heavy-duty diesel engine fueled with dimethyl ether (DME). The optimization includes the key combustion system related hardware, bowl geometry and injection nozzle design, together with the most relevant air management and injection settings. The GA was linked to the KIVA computational fluid dynamics code and an automated grid generation tool to perform a single-objective optimization. The optimization target focused on maximizing efficiency, while keeping NOx emissions, peak pressure and maximum pressure rise rate under the baseline engine levels. This research work not only provides the optimum combustion system definition, but also the cause-effect relation between the inputs and outputs under investigation, identifying the most relevant parameters controlling the performance of a DME fueled engine. Piston bowl geometry is found to primarily influence heat transfer and combustion efficiency due to its impact on the surface area and fuel distribution, respectively. Mixing is most affected by the injection system parameters. Finally, the optimum DME engine configuration provides 6.9% absolute net indicated efficiency improvement over the baseline engine fueled with DME. This study confirms the potential of DME as a promising fuel for the future generation of compression ignition engines and demonstrates the need to co-optimize the fuel and combustion system., Authors acknowledge that this work was possible thanks to the Ayuda para la Formacion de Profesorado Universitario (FPU 13/02817) belonging to the Subprogramas de Formacion y de Movilidad del Ministerio de Educacion, Cultura y Deporte from Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

GPU implementation of Krylov solvers for block-tridiagonal eigenvalue problems

  • Lamas Daviña, Alejandro
  • Jose E. Roman|||0000-0003-1144-6772
In an eigenvalue problem defined by one or two matrices with block-tridiagonal structure, if only a few eigenpairs are required it is interesting to consider iterative methods based on Krylov subspaces, even if matrix blocks are dense. In this context, using the GPU for the associated dense linear algebra may provide high performance. We analyze this in an implementation done in the context of SLEPc, the Scalable Library for Eigenvalue Problem Computations. In the case of a generalized eigenproblem or when interior eigenvalues are computed with shift-and-invert, the main computational kernel is the solution of linear systems with a block-tridiagonal matrix. We explore possible implementations of this operation on the GPU, including a block cyclic reduction algorithm., This work was partially supported by the Spanish Ministry of Economy and Competitiveness under grant TIN2013-41049-P. Alejandro Lamas was supported by the Spanish Ministry of Education, Culture and Sport through grant FPU13-06655.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Real-time corrosion monitoring of an ultra-high performance fibre-reinforced concrete offshore raft by using an autonomous sensor sytem

  • Ramón Zamora, José Enrique
  • Bataller Prats, Román
  • López, Juan A.
  • Soto Camino, Juan
  • Gandía-Romero, Jose M.|||0000-0003-0257-3286
  • Valcuende Payá, Manuel Octavio|||0000-0002-9967-1554
[EN] The excellent high-durability features of ultra-high performance fibre-reinforced concrete (UHPFRC) have been verified in laboratory studies, but its performance under service conditions are being studied. Indeed, structural health monitoring (SHM) can be considered an efficient strategy to assess built structures in which concrete matrix performance differs from that those found when assessing laboratory samples (variable actions, cracking, etc.). This work presents INESSCOM, an automated corrosion rate monitoring system, as an innovative support to SHM strategy to monitor UHPFRC structures in terms of durability. Its innovation lies in its durable and multi-parametric sensor designed to be embedded in multiple parts of a structure. The results from pre-vious laboratory tests and those obtained during real-time monitoring of an offshore UHPFRC raft are presented. Acceptable deviation of 20% was obtained in corrosion rate measurements with the advantageous reference-electrode-free cell of the sensor with respect to the classical three-electrode cell. Furthermore, sensor provided accurate corrosion measurements in UHPFRC despite its extremely high electrical resistivity and large amount of steel fibres. After 17-month monitoring of the UHPFRC raft, excellent perfor-mance was evidenced under service conditions with corrosion rate values always <0.1 ¿A/cm2. Conversely, corrosion rate reached 0.4 ¿A/cm2 in a con-ventional concrete specimen installed for comparison. Corrosion initiation and propagation stages were clearly defined through the corrosion-penetration-damage (¿m) diagram obtained for the specimen. Present work positions INESSCOM as an innovative support to structural health monitoring strategy in UHPFRC structures., UPV, Grant/Award Number: SP20180245; Spanish Ministry of Economy and Competitiveness, Grant/Award Numbers: BIA2016-78460-C3-3-R, PID2020-119744RB-C21, PID2020-119744RB-C22; Spanish Ministry of Science and Innovation, Grant/Award Number: FPU13/00911
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Developing a depth-based tracking systems for interactive playful environments with animals

  • Pons Tomás, Patricia
  • Catalá Bolós, Alejandro
  • Jaén Martínez, Francisco Javier|||0000-0002-8815-9643
[EN] Digital games for animals within Animal Computer Interaction are usually single-device oriented, however richer interactions could be delivered by considering multimodal environments and expanding the number of technological elements involved. In these playful ecosystems, animals could be either alone or accompanied by human beings, but in both cases the system should react properly to the interactions of all the players, creating more engaging and natural games. Technologically-mediated playful scenarios for animals will therefore require contextual information about the game participants, such as their location or body posture, in order to suitably adapt the system reactions. This paper presents a depth-based tracking system for cats capable of detecting their location, body posture and field of view. The proposed system could also be extended to locate and detect human gestures and track small robots, becoming a promising component in the creation of intelligent interspecies playful environments., Work supported by the Spanish Ministry of Economy and Competitiveness and funded by the EDRF-FEDER (TIN2014-60077-R). The work of Patricia Pons has been supported by a national grant from the Spanish MECD (FPU13/03831). Alejandro Catalá also received support from a VALi+d fellowship from the GVA (APOSTD/2013/013). Special thanks to our cat participants, their owners, and our feline caretakers and therapists
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Computational optimization of a combustion system for a stoichiometric DME fueled compression ignition engine

  • Benajes, Jesús|||0000-0002-1653-9188
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Pastor Enguídanos, José Manuel|||0000-0003-4458-0353
  • Hernández-López, Alberto
  • Kokjohn, Sage L.
[EN] An optimization methodology based on a genetic algorithm coupled with the KIVA computational fluid dynamics (CFD) code is applied to the design of a combustion system of a heavy-duty diesel engine fueled with dimethyl ether (DME) and working with stoichiometric combustion in order to equip the system with a three way catalyst (TWC) to control the NOx emissions. The target of the optimization is to improve net indicated efficiency (NIE) while keeping NOx emissions, peak pressure and pressure rise rate under the reference engine levels. The results of the study provide an optimum configuration that offers a 0.6% NIE improvement while satisfying the restrictions and offering NOx values lower than 1% of the original emissions. Due to the methodology, not only the optimum combustion system configuration is presented, but also the cause-effect relation of the most relevant inputs with the optimization outputs are identified and analyzed. The new geometry shape reduced heat transfer losses by minimizing the surface area. Injection pressure and swirl proved to be key parameters necessary to overcome the increased mixing requirements of stoichiometric operation. EGR was found to simultaneously increase NIE while controlling NOx emissions. The results show the potential of stoichiometric compression ignition operation using DME as a promising pathway to maintain diesel-like efficiency, while achieving near zero NOx and soot emissions., Authors acknowledge that this work was possible thanks to the Ayuda para la Formacion de Profesorado Universitario (FPU13/02817) belonging to the Subprogramas de Formacion y de Movilidad del Ministerio de Educacion, Cultura y Deporte from Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study of ignition delay time and generalization of auto-ignition for PRFs in a RCEM by means of natural chemiluminescence

  • Desantes J.M.|||0000-0002-4124-9393
  • García-Oliver, José M|||0000-0002-2676-9681
  • Vera-Tudela-Fajardo, Walter Martin
  • López Pintor, Darío
  • Schneider, B.
  • Boulouchos, K.
An investigation of the effects of contour conditions and fuel properties on ignition delay time under Homogeneous Charge Compression Ignition (HCCI) conditions is presented in this study. A parametric variation of initial temperature, intake pressure, compression ratio, oxygen concentration and equivalence ratio has been carried out for Primary Reference Fuels (PRFs) in a Rapid Compression Expansion Machine (RCEM) while applying the optical technique of natural chemiluminescence along with a photo-multiplier. Additionally, the ignition delay time has been calculated from the pressure rise rate and also corresponding numerical simulations with CHEMKIN have been done. The results show that the ignition delay times from the chemical kinetic mechanisms agree with the trends obtained from the experiments. Moreover, the same mechanism proved to yield consistent results for both fuels at a wide range of conditions. On the other hand, the results from natural chemiluminescence also showed agreement with the ignition delay from the pressure signals. A 310 nm interference filter was used in order to detect the chemiluminescence of the OH* radical. In fact, the maximum area and peak intensity of the chemiluminescence measured during the combustion showed that the process of auto-ignition is generalized in the whole chamber. Moreover, the correlation of peak intensity, maximum area and ignition delay time demonstrated that natural chemiluminescence can also be used to calculate ignition delay times under different operating conditions. Finally, the area of chemiluminescence was proved to be more dependant on the fuel and ignition delay time than on the operating conditions. (C) 2015 Elsevier Ltd. All rights reserved., The authors would like to thank different members of the LAV team of the ETH-Zurich for their contribution to this work. The authors are grateful to the Universitat Politecnica de Valencia for financing the Ph.D. studies of Vera-Tudela (FPI SP1 Grant 30/05/2012) and his stay at ETH-Zurich (grant 30/12/2014). Finally, the authors would like to thank the Spanish Ministry of Education for financing the Ph.D. studies of Lopez-Pintor (Grant FPU13/02329) and his stay at ETH-Zurich (Grant EST14/00626).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Manufacturing and Characterization of Composite Fibreboards with Posidonia oceanica Wastes with an Environmentally-Friendly Binder from Epoxy Resin

  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Montanes, Nestor|||0000-0001-6070-127X
  • Fombuena, Vicent|||0000-0001-7266-6205
  • Balart, Rafael|||0000-0001-5670-7126
[EN] Highly environmentally-friendly fibreboards were manufactured by hot-press moulding using Posidonia ocaeanica wastes and a partially biobased epoxy resin as binder. Fibreboards with a constant fibre content of 70 wt % were successfully manufactured by thermo-compression. The effects of a conventional alkali treatment were compared to the synergistic effects that additional silanization with two silanes (amino and glycidyl) can exert on the mechanical and thermo-mechanical properties of fibreboards. The results revealed a remarkable improvement of the mechanical properties with the combination of the alkali treatment followed by the silanization. Scanning electron microscopy also revealed increased resin-fibre interactions due to the synergistic effect of both amino- and glycidyl-silanes. These fibreboards represent a formaldehyde-free solution and can positively contribute to sustainable development as the lignocellulosic component is a waste and the binder resin is partially biobased., This work was supported by the Ministry of Economy and Competitiveness-MINECO [MAT2014-59242-C2-1-R]. D. Garcia-Garcia wants to thank the Spanish Ministry of Education, Culture and Sports for the financial support through a FPU grant number FPU13/06011. L. Quiles-Carrillo acknowledges Generalitat Valenciana-GV for financial support through a FPI grant (ACIF/2016/182) and the Spanish Ministry of Education, Culture, and Sports (MECD) for his FPU grant (FPU15/03812).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Potentiometric thick-film sensors for measuring the pH of concrete

  • Gandía-Romero, Jose Manuel
  • Campos, I.
  • Soto Camino, Juan
  • Valcuende Payá, Manuel Octavio|||0000-0002-9967-1554
  • Garcia-Breijo, Eduardo|||0000-0002-9745-8485
  • Marcos Martínez, María Dolores|||0000-0001-7079-8589
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
Concrete carbonation is one of the main triggers of the corrosion process and hence of the premature deterioration of concrete reinforcements. In order to monitor and control the carbonation process, a potentiometric sensor using thick-film technology was developed. This paper includes the results of the research carried out to characterise the pH sensor, including the materials, response time, sensitivity, detection limit, reproducibility, reversibility and the study of chloride interference. The sensors have been studied in pore solutions and concrete specimens. The study shows that the thick-film sensor has a potentiometric response to variations in pH and is capable of providing continuous, real-time information on the progress of the carbonation front., The pre-doctoral scholarship was granted to Roman Bataller Prats by the Research Staff Training Program, "Formacion de Personal Investigador (FPI) 2012" from Universitat Politecnica de Valencia and to Jose Enrique Ramon Zamora by the University Faculty Training Program FPU13/0091, "Formacion del Profesorado Universitario (FPU) 2013" from the Spanish Ministry of Science and Innovation. The financial support from the Spanish Government and the European FEDER funds MAT2012-38429-004-04. ETSIE (UPV) by their support to the laboratory is also gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Integral Fractionation of Rice Husks into Bioactive Arabinoxylans, Cellulose Nanocrystals, and Silica Particles

  • Requena-Peris, Raquel
  • Jiménez Quero, A.
  • Moriana Torró, Rosana
  • Vilaplana Domingo, Francisco Javier
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Rice husk is an important agricultural byproduct that has not been exploited yet to full capacity for advanced applications. The feasibility of obtaining high-value products such as bioactive hemicelluloses and cellulose nanocrystals (CNCs) from rice husk is here demonstrated in a cascade biorefinery process using subcritical water extraction (SWE) prior to bleaching and acid hydrolysis and compared to traditional alkali pretreatments. The proposed SWE process enables the isolation of bioactive arabinoxylans with phenolic acid moieties, thus preserving their antioxidant and antibacterial properties that are lost during alkaline conditions. Additionally, SWE can be combined with subsequent bleaching and acid hydrolysis to obtain CNCs with large aspect ratio, high crystallinity, and thermal stability. The hydrothermal process also enables the recovery of silica particles that are lost during the alkali step but can be recovered after the isolation of the CNCs. Our biorefinery strategy results in the integral valorization of rice husk into their molecular components (bioactive arabinoxylans, cellulose nanocrystals, and silica particles), which can be used as additives for food applications and as reinforcing agents in biocomposite materials, respectively., The authors thank the Ministerio de Economía y Competitividad (Spain) for the financial support provided through Project AGL2016-76699-R. Author Raquel Requena thanks the Ministry of Education, Culture and Sport (Spain) for the FPU (FPU13/03444) Grant. This research work was also financed with a Short Term Scientific Mission of the COST Action FP1405.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Improved Tafel-Based Potentiostatic Approach for Corrosion Rate Monitoring of Reinforcing Steel

  • Ramón, José Enrique
  • Martínez, Isabel
  • Soto Camino, Juan
  • Gandía-Romero, Jose M.|||0000-0003-0257-3286
[EN] Potential step voltammetry (PSV) was introduced in earlier works as an advantageous alternative to traditional methods for measuring corrosion rate in reinforced concrete. The present study aims to improve PSV to maximize its applicability in corrosion rate monitoring, that is, beyond the narrowly-defined steel¿concrete systems in which was initially validated. It was therefore identified necessary to address the most suitable PSV pulse amplitudes to accurately obtain the Tafel lines and, therefore, corrosion rate in steel-mortar systems with well-differentiated ohmic drop. PSV findings were compared to reference methods, i.e. Tafel intersection and linear polarization resistance. As a novelty, we propose a procedure to improve the reliability of the PSV-determined Tafel lines, which is based on three protocols (P1, P2 and P3). P1 consists of a specific pulse sequence to accurately characterize the morphology of the polarization curve without disturbing the system. P2 consists of two short pulses for determining the ohmic drop compensation factor. Finally, P3 consists of a simple calculation procedure to accurately adjust the PSV pulse amplitudes (V) to the steel¿concrete system assessed, thus obviating the need for preset values and, therefore, ensuring accurate corrosion rate results. The procedure proposed is intended to improve PSV with a view to its consolidation as a reliable tool for the unsupervised monitoring of real structures., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work was supported by the pre-doctoral scholarship granted to Jose Enrique Ramon Zamora by the Spanish Ministry of Science and Innovation (Grant Number FPU13/00911). We would also like to acknowledge financial support from the Spanish Ministry of Science and Innovation through the national programs of oriented research, development and innovation to societal challenges (Project Numbers BIA2016-78460-C33-R, PID2020-119744RB-C21 and PID2020-119744RB-C22). To the Universitat Politecnica de Valencia for the financial support in the project "Ayudas a Primeros Proyectos de Investigacion (PAID-0618)"-SP20180245.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A fully automated method for segmentation and classification of local field potential recordings. Preliminary results

  • Díaz-Parra, Antonio
  • Canals, S.
  • Moratal, David|||0000-0002-2825-3646
[EN] Identification of brain states measured with electrophysiological methods such as electroencephalography and local field potential (LFP) recordings is of great importance in numerous neuroscientific applications. For instance, in Brain Computer Interface, in the diagnosis of neurological disorders as well as to investigate how brain rhythms stem from synchronized physiological mechanisms (e.g., memory and learning). In this work, we propose a fully automated method with the aim of partitioning LFP signals into stationary segments as well as classifying each detected segment into three different classes (delta, regular theta or irregular theta rhythms). Our approach is computationally efficient since the process of detection and partition of signals into stationary segments is only based on two features (the variance and the so-called spectral error measure) and allow the classification at the same time. We developed the algorithm upon analyzing six anesthetized rats, resulting in a true positive rate of 97.5%, 91.8% and 79.1% in detecting delta, irregular theta and regular theta rhythms, respectively. This preliminary quantitative evaluation offers encouraging results for further research., Research supported by the Spanish Ministerio de Economia y Competitividad (MINECO) under grants BFU2015-64380-C2-1-R and BFU2015-64380-C2-2R and European Union's Horizon 2020 research and innovation programme under grant agreement No 668863 (SyBil-AA). Santiago Canals acknowledges financial support from the Spanish State Research Agency, through the "Severo Ochoa" Programme for Centres of Excellence in R&D (ref. SEV- 2013-0317). Antonio Diaz-Parra is funded by the Spanish Ministerio de Educacion, Cultura y Deporte (MECD) under grant FPU13/01475.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Impact of hydrothermal ageing on the thermal stability, morphology and viscoelastic performance of PLA/sisal biocomposites

  • Gil Castell, Óscar
  • Badía Valiente, José David
  • Kittikorn, T.
  • Strömberg, E.
  • Ek, Martina
  • Karlsson, S.
  • Ribes-Greus, A.|||0000-0003-2460-8291
The influence of the combined exposure to water and temperature on the behaviour of polylactide/sisal biocomposites coupled with maleic acid anhydride was assessed through accelerated hydrothermal ageing. The biocomposites were immersed in water at temperatures from 65 to 85 °C, between the glass transition and cold crystallisation of the PLA matrix. The results showed that the most influent factor for water absorption was the percentage of fibres, followed by the presence of coupling agent, whereas the effect of the temperature was not significant. Deep assessment was devoted to biocomposites subjected to hydrothermal ageing at 85 °C, since it represents the extreme degrading condition. The morphology and crystallinity of the biocomposites were evaluated by means of X-Ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM). The viscoelastic and thermal performance were assessed by means of dynamic mechanic thermal analysis (DMTA) and thermogravimetry (TGA). The presence of sisal generally diminished the thermal stability of the biocomposites, which was mitigated by the addition of the coupling agent. After composite preparation, the effectiveness of the sisal fibre was improved by the crystallisation of PLA around sisal, which increased the storage modulus and reduced the dampening factor. The presence of the coupling agent strengthened this effect. After hydrothermal ageing, crystallisation was promoted in all biocomposites therefore showing more fragile behaviour evidencing pores and cracks. However, the addition of coupling agent in the formulation of biocomposites contributed in all cases to minimise the effects of hydrothermal ageing., The authors would like to acknowledge the Spanish Ministry of Economy and Competitiveness, through the Research Project ENE2014-53734-C2-1-R and UPOV13-3E-1947. The Spanish Ministry of Education, Culture and Sports is also thanked for the pre-doctoral FPU grant of O. Gil-Castell (FPU13/01916). Generalitat Valenciana is thanked for the APOSTD14/041 program for J.D. Badia. The Chilean Government is thanked for the 13CEI2-21839 project. The financial support given by the Prince of Songkla University and KTH Royal Institute of Technology is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Mapping and identification of antifungal peptides in the putative antifungal protein AfpB from the filamentous fungus Penicillium digitatum

  • Garrigues, Sandra
  • Gandía, Mónica
  • Borics, Attila
  • Marx, Florentine
  • Manzanares, Paloma
  • Marcos, Jose F.
[EN] Antifungal proteins (AFPs) from Ascomycetes are small cysteine-rich proteins that are abundantly secreted and show antifungal activity against non-producer fungi. A gene coding for a class B AFP (AfpB) was previously identified in the genome of the plant pathogen Penicillium digitatum. However, previous attempts to detect the AfpB protein were not successful despite the high expression of the corresponding afpB gene. In this work, the structure of the putative AfpB was modeled. Based on this model, four synthetic cysteine-containing peptides, PAF109, PAF112, PAF118, and PAF119, were designed and their antimicrobial activity was tested and characterized. PAF109 that corresponds to the ¿-core motif present in defensin-like antimicrobial proteins did not show antimicrobial activity. On the contrary, PAF112 and PAF118, which are cationic peptides derived from two surface-exposed loops in AfpB, showed moderate antifungal activity against P. digitatum and other filamentous fungi. It was also confirmed that cyclization through a disulfide bridge prevented peptide degradation. PAF116, which is a peptide analogous to PAF112 but derived from the Penicillium chrysogenum antifungal protein PAF, showed activity against P. digitatum similar to PAF112, but was less active than the native PAF protein. The two AfpB-derived antifungal peptides PAF112 and PAF118 showed positive synergistic interaction when combined against P. digitatum. Furthermore, the synthetic hexapeptide PAF26 previously described in our laboratory also exhibited synergistic interaction with the peptides PAF112, PAF118, and PAF116, as well as with the PAF protein. This study is an important contribution to the mapping of antifungal motifs within the AfpB and other AFPs, and opens up new strategies for the rational design and application of antifungal peptides and proteins., This work was funded by grants BIO2012-34381 and BIO2015-68790-C2-1-R from the Ministerio de Economía y Competitividad (Spain) (MINECO/FEDER Funds) and P25894-B20 from the Austrian Science Fund (FWF). SG was recipient of a predoctoral scholarship (FPU13/04584) within the FPU program from Ministerio de Educación, Cultura y Deporte (MECD, Spain). Support for publication was provided by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Polycaprolactone/gelatin-based scaffolds with tailored performance: in vitro and in vivo validation

  • Gil-Castell, O.
  • Badia, J.D.
  • Ontoria-Oviedo, I.
  • Castellano, D.
  • Sepúlveda, P.
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] Nanofibrous scaffolds composed of polycaprolactone (PCL) and gelatin (Ge) were obtained through a hydrolytic assisted electrospinning process. The PCL-to-Ge proportion (100/0 to 20/80), as well as the dissolution time (24, 48, 72, 96, 120 h) into a 1:1 formic/acetic acid solvent before electrospinning were modified to obtain the different samples. A strong influence of these factors on the physicochemical properties of the scaffolds was observed. Higher Ge percentage reduced crystallinity, allowed a uniform morphology and increased water contact angle. The increase in the dissolution time considerably reduced the molar mass and, subsequently, fibre diameter and crystallinity were affected. During in vitro biocompatibility tests, higher cell adhesion and proliferation were found for the 60/40, 50/50 and 40/60 PCL/Ge compositions that was corroborated by MTT assay, fluorescence and microscopy. A weakened structure, more labile to the in vitro degradation in physiologic conditions was found for these compositions with higher dissolution times (72 and 96 h). Particularly, the 40/60 PCL/Ge scaffolds revealed an interesting progressive degradation behaviour as a function of the dissolution time. Moreover, these scaffolds were non-inflammatory, as revealed by the pyrogen test and after the 15-day subcutaneous in vivo implantation in mice. Finally, a reduction of the scar tissue area after infarction was found for the 40/60 PCL/Ge scaffolds electrospun after 72 h implanted in rat hearts. These results are especially interesting and represent a feasible way to avoid undesired inflammatory reactions during the scaffold assimilation., The Spanish Ministry of Economy and Competitiveness is acknowledged for the project RESOLTEX project (RTC-2015-4185-1). The Spanish Ministry of Education, Culture and Sports is thanked for the pre-doctoral FPU grant of O. Gil-Castell (FPU13/01916). The Generalitat Valenciana is thanked for the APOSTD/2014/041 for J.D. Badia. The Universitat Politècnica de València and IIS LaFe are acknowledged for the SCARDIO project (2014_0460_CRC_COLAB_UPVLAFE_SEPULVEDA). P. Sepúlveda acknowledges the Instituto de Salud Carlos III (ISCIII) for the I3SNS Program. This work was supported by grants PI16/0107 and RETICS Program (RD16/0011/0004) from ISCIII cofunded by the European Regional Development Fund-ERDF Una manera de hacer Europa . The City Council of Algemesí is acknowledged for the XIV Premi Cientificotècnic Ciutat d Algemesí award to O. Gil-Castell, for this work as the best young researcher of the Ribera District.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fast simulation of the pantograph-catenary dynamic interaction

  • Gregori Verdú, Santiago|||0000-0002-0483-3531
  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Nadal, Enrique|||0000-0002-2808-298X
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
  • Aguado, J.V.
  • Chinesta, F.
Simulation of the pantograph-catenary dynamic interaction has now become a useful tool for designing and optimizing the system. In order to perform accurate simulations, including system non-linearities, the Finite Element Method is commonly employed combined with a time integration scheme, even though the computational time required may be longer than with the use of other simpler approaches. In this paper we propose a two-stage methodology (Offline/Online) which notably reduces the computational cost without any loss in accuracy and makes it possible to successfully carry out very efficient optimizations or even Hardware in the Loop simulations with real-time requirements., The authors would like to acknowledge the financial support received from the FPU program offered by the Ministerio de Educacion, Cultura y Deporte under grant number (FPU13/04191), and also funding from the Universitat Politecnica de Valencia and the Generalitat Valenciana (PROMETEO/2016/007).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Fusibles estructurales para evitar la propagación de fallos en las cimbras de edificación

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Moragues, Juan J|||0000-0001-8111-5480
  • Oliver-Cano, Marina
  • Adam, Jose M|||0000-0002-9205-8458
[ES] La construcción de edificios con estructura de hormigón armado se realiza, habitualmente, con la ayuda de puntales metálicos que se encargan de transmitir las cargas de las plantas recién hormigonadas a las inferiores. Los principales problemas que presenta el empleo de puntales son: a) la aparición de cargas superiores a las previstas en los puntales, pudiendo provocar el colapso de toda la cimbra o incluso del edificio, b) la heterogeneidad de las cargas que reciben los puntales de una misma planta cimbrada, y c) la limitada variedad de puntales de que disponen las casas comerciales. Todo ello obliga a que, en la mayor parte de las ocasiones, los puntales empleados en las obras estén claramente sobredimensionados. En este artículo se presenta el fusible estructural para el control de la carga de los puntales (también llamado limitador de carga o LL por sus siglas en inglés), que fue desarrollado en ICITECH a partir de estudios teóricos avanzados, una intensa campaña experimental y la ejecución de una prueba de concepto. El artículo se compone de: 1) una breve recopilación de los trabajos experimentales y de validación computacional llevados a cabo; y 2) el estudio realizado con simulación numérica avanzada para evaluar y cuantificar la posible mitigación del daño y el riesgo de fallo de estructuras de edificios durante su construcción. De los resultados obtenidos se puede afirmar que con el uso de LLs se consigue una mejora: de la seguridad, frente a fallos locales de la cimbra cuyas consecuencias podrían propagarse de forma desproporcionada; de la eficiencia estructural, con una mayor uniformidad en las cargas que reciben los puntales; y de los costes del sistema de apuntalamiento., Los autores quieren expresar su gratitud a todas las entidades por la financiación recibida (FPU13/02466; PRX17/00302; GV/2015/063; APOSTD/2019/101; 101000396; IJC2020- 042642-I), así como a las empresas Encofrado J. Alsina S.A. y Levantina, Ingeniería y Construcción S.L. por su invalorable cooperación.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Reinforcing capability of cellulose nanocrystals obtained from pine cones in a biodegradable poly(3-hydroxybutyrate)/poly(e-caprolactone) (PHB/PCL) thermoplastic blend

  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Balart, Rafael|||0000-0001-5670-7126
  • Strömberg, E.
  • Moriana, Rosana
[EN] In this work, different loads (3, 5 and 7 wt%) of pine cone cellulose nanocrystals (CNCs) were added to films of poly(3-hydroxybutyrate)/poly(epsilon-caprolactone) (PHB/PCL) blends with a composition of 75 wt% PHB and 25 wt % PCL (PHB75/PCL25). The films were obtained after solvent casting followed by melt compounding in an extruder and finally subjected to a thermocompression process. The influence of different CNCs loadings on the mechanical, thermal, optical, wettability and disintegration in controlled compost properties of the PHB75/PCL25 blend was discussed. Field emission scanning electron microscopy (FESEM) revealed the best dispersion of CNCs on the polymeric matrix was at a load of 3 wt%. Over this loading, CNCs aggregates were formed enhancing the films fragilization due to stress concentration phenomena. However, the addition of CNCs improved the optical properties of the PHB75/PCL25 films by increasing their transparency and accelerated the film disintegration in controlled soil conditions. In general, the blend with 3 wt% CNCs offers the best balanced properties in terms of mechanical, thermal, optical and wettability., This research was supported by the Ministry of Economy and Competitiveness MINECO through the gran number MAT2014-59242-C2-1-R. D. Garcia-Garcia wants to thank the Spanish Ministry of Education, Culture and Sports for the financial support through a FPU grant number FPU13/06011.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

ICFHR2016 Handwritten Keyword Spotting Competition (H-KWS 2016)

  • Pratikakis, Ioannis
  • Zagoris, Konstantinos
  • Gatos, Basilis
  • Puigcerver, Joan
  • Toselli, Alejandro Héctor|||0000-0001-6955-9249
  • Vidal, Enrique|||0000-0003-4579-5196
[EN] The H-KWS 2016, organized in the context of the ICFHR 2016 conference aims at setting up an evaluation framework for benchmarking handwritten keyword spotting (KWS) examining both the Query by Example (QbE) and the Query by String (QbS) approaches. Both KWS approaches were hosted into two different tracks, which in turn were split into two distinct challenges, namely, a segmentation-based and a segmentation-free to accommodate different perspectives adopted by researchers in the KWS field. In addition, the competition aims to evaluate the submitted training-based methods under different amounts of training data. Four participants submitted at least one solution to one of the challenges, according to the capabilities and/or restrictions of their systems. The data used in the competition consisted of historical German and English documents with their own characteristics and complexities. This paper presents the details of the competition, including the data, evaluation metrics and results of the best run of each participating methods., This work was partially supported by the Spanish MEC under FPU grant FPU13/06281, by the Generalitat Valenciana under the Prometeo/2009/014 project grant ALMA-MATER, and through the EU projects: HIMANIS (JPICH programme, Spanish grant Ref. PCIN-2015-068) and READ (Horizon-2020 programme, grant Ref. 674943).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Load limiters on shores: Design and experimental research

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Adam, Jose M|||0000-0002-9205-8458
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Moragues, Juan J|||0000-0001-8111-5480
[EN] When constructing reinforced concrete building structures, shores are normally used to transmit the loads from freshly poured slabs to lower floors. However, certain problems are involved in this process, including: (a) the loads on the shores may be higher than expected, which can lead to the collapse of the shoring system or even of the whole structure, and (b) the limited range of shore types in commercial catalogues, which often means that the shores used are oversized. This paper describes the study carried out on the development of a new loadlimiter (LL) that can be fitted to shores to improve safety and reduce the cost of constructing building structures. The study shows that combining mechanical and civil engineering fields made it possible to produce a novel device that could revolutionise the shoring techniques at present in use. The method of designing and implementing the LLs involved: (a) the design of prototypes by using numerical simulations, (b) the use of the design of experiments technique, (c) an ambitious experimental campaign in which LL were tested, (d) the detailed simulation of the final design, and (e) the formulation of a simplified model that considers the behaviour of the shore-LL as a unit., The authors would like to express their gratitude to the Spanish Ministry of Education, Culture and Sport for funding received under the FPU Program [FPU13/02466], also to the Generalitat Valenciana [GV/2015/063] and to Professor Salvador Ivorra from University of Alicante for helping us to carry out the steel characterization tests.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Promotion of mixed protonic-electronic transport in La5.4WO11.1-d membranes under H2S atmospheres

  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Toldrá-Reig, Fidel|||0000-0001-6133-7043
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Solis Díaz, Cecilia
  • Somacescu, S.
  • Gerhards, U.
  • Aguadero, A.
  • Haas-Santo, K.
  • Dittmeyer, R.
[EN] Catalytic membrane reactors (CMR) based on H-2-separation membranes can improve the performance of thermodynamically-limited reactions such as high-pressure steam methane reforming, ammonia cracking, non-oxidative aromatics production, and water gas shift reaction (WGS). In these industrial processes, the membrane surfaces are typically exposed to steam, CO2, CO, H2S, and hydrocarbons in combination with high temperatures. Therefore, the membrane materials require long-term thermo-chemical stability under the mentioned conditions. Stability in H2S is of outstanding importance since its presence, even at ppm level, gives rise to substantial surface poisoning and decomposition of most materials. Here we characterize the influence of H2S on the crystalline structure, lattice composition, and hydrogen-transport properties of La5.4WO11.1-& delta;, one of the reference protonic membrane materials. The incorporation of sulfide ions in the crystal lattice is ascertained from XRD, XPS, FESEM, WDS, EDS, and FIB-SIMS analyses. UV-vis spectroscopy and EIS measurements illustrate the effect of the incorporated sulfur in the transport properties, i.e., vigorously promoting the electronic conductivity mediated by the concurrent partial reduction of tungsten cations (W6+). The rise in electronic conductivity allowed an H-2 flux of 0.042 mL cm(-2) min(-1) to be reached at 700 & DEG;C for a & SIM;700 & mu;m-thick membrane, in contrast with negligible H-2 permeation in H2S-free conditions., This work was financially supported by the Spanish Government (RTI2018-102161, IJCI-2016-28330, IJCI-2017-34110, FPU13/03478 and CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) and by MCIN with funding from NextGenerationEU (PRTR-C17.I1) within the Planes Complementarios con CCAA (Area of Green Hydrogen and Energy) and it has been carried out in the CSIC Interdisciplinary Thematic Platform (PTI+) Transicion Energetica Sostenible+ (PTI-TRANSENER+).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Toe berm design for very shallow waters on steep sea bottoms

  • Herrera Gamboa, María Piedad
  • Medina, Josep R.|||0000-0001-5007-7426
The toe berm is a relevant design element when rubble mound breakwaters are built on steep sea bottoms in breaking conditions. Different design formulas can be found in the literature to predict the damage caused to submerged toe berms placed on gentle bottom slopes. However, these formulas are not valid for very shallow waters in combination with steep sea bottoms where toe berms receive the full force of breaking waves. To guarantee breakwater stability in these conditions, new design formulas are needed for toe berms. To this end, physical model tests were carried out and data were analyzed to characterize rock toe berm stability in very shallow water and with a bottom slope m = 1/10. Based on test results, a new formula was developed with three parameters to estimate the nominal diameter (Dn50) of the toe berm rocks: water depth at the toe (hs), deep water significant wave height (Hs0), and deep water wave length (L0p)., The first author was financially supported through the FPU program (Formacion del Profesorado Universitario) funded by the Spanish Ministry of Education (Ministerio de Educacion, Cultura y Deporte) FPU13/01872. The authors also acknowledge financial support from the Spanish Ministry of Economy and Competitiveness (grant BIA2012-33967). The authors thank Debra Westall for revising the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

MWP phase shifters integrated in PbS-SU8 waveguides

  • Hervás Peralta, Javier
  • Suárez Álvarez, Isaac
  • Perez, Joaquin
  • Rodríguez Cantó, Pedro Javier
  • Abargues, Rafael
  • Martinez-Pastor, J.P.
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Capmany Francoy, José|||0000-0002-6460-4167
[EN] We present new kind of microwave phase shifters (MPS) based on dispersion of PbS colloidal quantum dots (QDs) in commercially available photoresist SU8 after a ligand exchange process. Ridge PbS-SU8 waveguides are implemented by integration of the nanocomposite in a silicon platform. When these waveguides are pumped at wavelengths below the band-gap of the PbS QDs, a phase shift in an optically conveyed (at 1550 nm) microwave signal is produced. The strong light confinement produced in the ridge waveguides allows an improvement of the phase shift as compared to the case of planar structures. Moreover, a novel ridge bilayer waveguide composed by a PbS-SU8 nanocomposite and a SU8 passive layer is proposed to decrease the propagation losses of the pump beam and in consequence to improve the microwave phase shift up to 36.5° at 25 GHz. Experimental results are reproduced by a theoretical model based on the slow light effect produced in a semiconductor waveguide due to the coherent population oscillations. The resulting device shows potential benefits respect to the current MPS technologies since it allows a fast tunability of the phase shift and a high level of integration due to its small size., The authors would like to thank Prof. Antonio Diez (Semiconductor and Fiber Optics group from the University of Valencia) for the fabrication of the tapered fiber tip. This work was supported in part by the Spanish MCINN through the projects TEC2011-29120-C05-05 and TEC2011-29120-C05-01, the financial support given by the Research Excellency Award Program GVA PROMETEO 2013/012, the EU-NAVOLCHI (project 288869) and the SEQMUST project under R+D+i joint resources and appreciation programme from the VLC/CAMPUS International Campus of Excellence supported by the Spanish MECD. J. Hervas work is supported by the MECD FPU scholarship (FPU13/04675) and J. Perez's work is supported by Spanish MINECO Juan de la Cierva Fellowship JCI-2012-14805.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Estimating loads on shores during the construction of RC building structures

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Adam, Jose M|||0000-0002-9205-8458
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Moragues, Juan J|||0000-0001-8111-5480
  • Alvarado Vargas, Yezid Alexander
When constructing reinforced concrete (RC) building structures, knowing the loads to which the shoring system will be subjected during the entire process is one of the key aspects to ensure safety during the work. Although various simplified methods of estimating the load transmission between shores and slabs during construction have been proposed to date, none of these methods can estimate the loads on individual shores during the different construction phases. This paper proposes a calculation method that allows the loads on individual shores to be calculated for each construction phase, without having to resort to the use of advanced software. The proposal was validated by comparison with the results obtained from two actual buildings under construction and represents a step forward in the construction of RC building structures, as it is the first method that offers the possibility of estimating the loads acting on each shore during all the construction phases., The authors would like to express their gratitude to the Spanish Ministry of Education, Culture and Sport for funding received under the FPU Programme (FPU13/02466) and also to the Generalitat Valenciana (GV/2015/063).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Validity of the Livengood &amp, Wu correlation and theoretical development of an alternative procedure to predict ignition delays under variable thermodynamic conditions

  • Desantes J.M.|||0000-0002-4124-9393
  • López, J. Javier|||0000-0002-9486-2511
  • Molina, Santiago|||0000-0001-7879-2421
  • López Pintor, Darío
A theoretical study about the autoignition phenomenon has been performed in this article. The hypotheses of the Livengood & Wu integral have been revised, concluding that the critical concentration of chain carriers is not constant. However, its validity under engine conditions has been justified. Expressions to characterize the temporal evolution of the concentration of chain carriers, as well as the critical concentration of active radicals and the ignition delay, have been obtained starting from the Glassman s model. A new expression to predict ignition delays under variable conditions has been developed and the results obtained with this expression have been compared with those obtained from the Livengood & Wu integral. Two different fuels have been studied: isooctane (as a gasoline surrogate) and n-heptane (as a diesel fuel surrogate). The new method to predict ignition delays under variable conditions has shown, in general, better results than the classic Livengood & Wu integral, but the inability of the Glassman s model to reproduce the negative temperature coefficient regime should be improved in future works., The authors would like to thank different members of the CMT-Motores Termicos team of the Universitat Politecnica de Valencia for their contribution to this work. The authors would also like to thank the Spanish Ministry of Education for financing the PhD. Studies of Dario Lopez-Pintor (Grant FPU13/02329). This work was partly founded by the Generalitat Valenciana, Project PROMETEOII/2014/043.k.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Stochastic Monte Carlo simulations of the pantograph-catenary dynamic interaction to allow for uncertainties introduced during catenary installation

  • Gregori Verdú, Santiago|||0000-0002-0483-3531
  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Tarancón Caro, José Enrique|||0000-0002-1469-5304
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
[EN] The simulation of the pantograph-catenary dynamic interaction is at present mainly based on deterministic approaches. However, any errors made during the catenary stringing process are sources of variability that can affect the dynamic performance of the system. In this paper, we analyse the influence of dropper length, dropper spacing and support height errors on the current collection quality by applying a classic Monte Carlo method to obtain the probability density functions of several output quantities. The effects of installation errors are also studied for a range of train speeds. Finally, the pre-sag that, on average, produces the best behaviour of the system is identified, allowing for the uncertainty in the catenary installation. The results obtained show the convenience to consider variability in pantograph-catenary dynamic simulations., The authors would like to acknowledge the financial support received from the FPU program offered by the Spanish Ministry of Education, Culture and Sports (Ministerio de Educacion, Cultura y Deportes) [grant number FPU13/04191]. The funding provided by the Regional Government of Valencia (Generalitat Valenciana) [PROMETEO/2016/007] and the Spanish Ministry of Economy, Industry and Competitiveness (Ministerio de Economia, Industria y Competitividad) [TRA2017-84736-R] is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Potential of NIR spectroscopy to predict amygdalin content established by HPLC in intact almonds and classification based on almond bitterness

  • Cortes-Lopez, Victoria
  • Lerma-García, María Jesús
  • Talens Oliag, Pau|||0000-0001-7318-3336
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
[EN] In this study, 360 intact almonds, half sweet and half bitter, were assessed by near-infrared (NIR) spectroscopy to predict amygdalin content (established by high performance liquid chromatography (HPLC)) and by applying partial least squares (PLS) to the spectral data. After optimising amygdalin extraction and chromatographic conditions, the amygdalin contents found by HPLC were not detected or below to 350 mg kg-1 for sweet almonds, and between 14,700 and 50,400mg kg 1 for bitter almonds. The intact almond spectra resulted in good predictions of amygdalin content with R2p of 0.939 and RMSEP of 0.373. Almonds were correctly classified into sweet and bitter by linear discriminant analysis (LDA), quadratic discriminant analysis (QDA) and PLS-DA, with sensitivity and specificity values higher than 0.94 for evaluation set samples. Based on these results, it can be concluded that NIR spectroscopy is a good non-destructive alternative to be used as an automatic in-line classification system by food industry., Victoria Cortes Lopez thanks the Spanish Ministry of Education, Culture and Sports for the FPU grant (FPU13/04202). The authors wish to thank the cooperative Agricoop for kindly donating the almonds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Avoiding failures during building construction using structural fuses as load limiters on temporary shoring structures

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Adam, Jose M|||0000-0002-9205-8458
  • Sagaseta, Juan
[EN] The risk of structural failure of buildings can be significant during construction. Temporary adjustable telescopic steel shores or props are commonly used in building construction. The failure of shores is sudden and therefore structural fuses as load limiters (LL) can be introduced to provide ductility in the temporary member for a specified limit failure load. Previous work by the authors showed that the design of shoring systems can be improved using LL for standard cases of imposed loads applied during construction. This paper extends this work to cases of accidental loading where the shoring system-permanent structure interaction is less known. The main principles of LLs are discussed and implemented in advanced numerical simulations of a real case RC building during construction by means of explicit nonlinear dynamic finite element analyses. Different local failure scenarios were investigated corresponding to cases observed in practice. The comparison of the numerical results obtained with and without LLs demonstrated for the first time the benefits of using LLs in terms of: (a) mitigating the risk of failure of the temporary structure; and (b) reducing permanent damage (cracking and short-term deflections in the slab) affecting the durability and functionality of the building., The authors would like to express their gratitude to the Spanish Ministry of Education, Culture and Sport for funding received under: (a) the FPU Program [FPU13/02466] and complementary funding received for a stay at the University of Surrey (UK), and (b) the Mobility Program (Salvador de Madariaga 2017) of the Promotion of Talent and Employability within the state s Research & Innovation Program 2013 2016 [PRX17/00302]. The authors would also like to thank the Generalitat Valenciana (Spain) for funding received [GV/2015/063], Dr. P. Olmati, who developed the preliminary FE model of the structure at the operational stage as part of a project sponsored by the EPSRC (UK) Impact Acceleration Account held by the University of Surrey [Grant Ref: EP/K503939] linked to a previous project funded by the EPSRC [Grant Ref: EP/K008153/1], and Dr. J. Asensi for providing the photograph included in Fig. 1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Coordinated dual-hormone artificial pancreas with parallel control structure

  • Moscardo, Vanessa
  • Herrero, Pau
  • Giménez, Marga
  • Rossetti, Paolo
  • Georgiou, Pantelis
  • Diez, José-Luís|||0000-0002-5659-1212
  • Bondía Company, Jorge|||0000-0001-7286-3719
[EN] Concomitant glucagon delivery in a dual-hormone artificial pancreas system might overcome the limitations of insulin-only systems, potentially leading to improved hypoglycemia mitigation. However, current dual-hormone systems have not shown clearly its superiority. This work presents a novel dual-hormone system based on a parallel control structure with intrinsic coordination among insulin and glucagon delivery. The proposed coordinated controller (CC) was compared with its non-coordinated counterpart (NCC) based on independent loops for the insulin and glucagon controllers, as done in current systems. To evaluate the benefits of coordination, CC and NCC shared the same insulin controller, differing solely on how glucagon is administered. An in-silico study using the UVA-Padova simulator, extended with variability sources, was performed. Three scenarios were considered, comprising meals, snacks and exercise. CC achieved superior performance with better values of times in ranges. Moreover, CC delivered lower glucagon doses than the two NCC tuning alternatives considered., This work was supported by the Spanish Ministry of Economy, Industry and Competitiveness (MINECO) through grant number DPI2016-78831-C2-1-R and the European Union through FEDER funds. Vanessa Moscardowas recipient of an FPU grant, FPU13/04253.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization of electrochemical systems using potential step voltammetry. Part II: Modeling of reversible systems

  • Martínez-Ibernón, Ana|||0000-0003-2136-5650
  • Gandía-Romero, Jose M.|||0000-0003-0257-3286
  • Gasch, Isabel|||0000-0001-7036-4481
  • Valcuende Payá, Manuel Octavio|||0000-0002-9967-1554
  • Alcañiz Fillol, Miguel|||0000-0002-4579-9210
  • Ramón Zamora, José Enrique
  • Soto Camino, Juan
[EN] This study was carried out to compare the results obtained using potential step voltammetry and linear sweep voltammetry with a rotating gold disc electrode (RDE), when models based on equivalent circuits (EC) were used. The results lead to an equivalent circuit model that allows us to interpret the electrochemical behavior of aqueous solutions containing Fe(CN)(6)(-4) and Fe(CN)(6)(-3). With this model, we determined the values of the electrical resistance of the medium (R-s) as well as its polarization resistance (R-p), and established correlations between these values and the kinetic parameters of the system. The proposal highlights the need to introduce a new component for modeling using EC, which we have called the electrochemical diode. (C) 2019 Elsevier Ltd. All rights reserved., The authors gratefully acknowledge the financial support of BIA2016-78460-C3-3-R, MAT2015-64139-C4-3-R and RTI2018-100910-B-C43 (MINECO/FEDER) projects. We would also like to extend our appreciation for the pre-doctoral FPU scholarships (University Teacher Training scholarship) granted to Ana Martinez Ibernon (FPU 16/00723) and Jose Enrique Ramon Zamora (FPU13/00911) by the Spanish Ministry of Science and Innovation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A new internal quality index for mango and its predicción by external visible and near-infrared reflection spectroscopy

  • Cortés López, Victoria
  • Blasco Ivars, José
  • Cubero García, Sergio
  • Ortiz Sánchez, María Coral|||0000-0002-2744-6964
  • Aleixos Borrás, María Nuria|||0000-0001-6051-3375
  • Talens Oliag, Pau|||0000-0001-7318-3336
[EN] A non-destructive method based on external visible and near-infrared reflection spectroscopy for determining the internal quality of intact mango cv. ‘Osteen’ was investigated. An internal quality index, well correlated with the ripening index of the samples, was developed based on the combination of a biochemical property (total soluble solids) and physical properties (firmness and flesh colour) of mango samples. The diffuse reflectance spectra of the samples were recorded and used to predict the internal quality and the ripening index. These spectra were obtained using different spectroscopic external measurement sensors involving a spectrometer, capable of measuring in different spectral ranges (600– 1100 nm and 900–1750 nm), and also a spectrocolorimeter that measured in the visible range (400– 700 nm). Three regression models were developed by partial least squares to establish the relationship between spectra and indices. Good results in the prediction of internal quality of the samples were obtained using the full spectral range (Rp 2 = 0.833–0.879, RMSEP = 0.403–0.507 and RPD = 2.341–2.826) and some selected wavelengths (Rp 2 = 0.815–0.896, RMSEP = 0.403–0.537 and RPD = 2.060–2.905). The results obtained from this study revealed that external visible and near-infrared reflection spectroscopy can be used as a non-destructive method to determine the internal quality of mango cv. ‘Osteen’., This work was partially funded by the Conselleria d' Educació, Investigació, Cultura i Esport, Generalitat Valenciana, through the project AICO/2015/122 and by the INIA through the projects RTA2012-00062-C04-01, 02 and 03 with the support of FEDER funds. V. Cortés López thanks the Spanish MEC for the FPU grant (FPU13/04202).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effects of sudden failure of shoring elements in concrete building structures under construction

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Adam, Jose M|||0000-0002-9205-8458
  • Sagaseta, Juan
[EN] The most frequently used technique to construct reinforced concrete (RC) building structures is the shoring or propping of successive floors, in which the slabs are supported by the shores until the concrete acquires sufficient strength. A significant number of structural failures have been reported during construction in recent years leading in some cases to the progressive collapse of the whole structure. The collapse often starts with the local failure of a single element which could be due to errors in design or construction and/or due to accidental events. Although this is a well-recognized problem, studies on the effects of local failure in the shoring elements on the integrity of the shoring-structure system have not been carried out in the past. In this work advanced numerical finite element models were carried out of a three-storey RC building and its shoring system. Four scenarios of local failure were considered: sudden removal of a (1) shore, (2) joist and (3) complete shore line; and (4) incorrect selection of shores. The results indicated that the structure-shoring system was able to develop al- ternative load paths without dynamic amplification effects due to the large stiffness and redundancy of the system without compromising the integrity of the structure but leading to significant damage in the concrete slabs. Design recommendations are also given based on the results from this study, which pretend to be the first study to focus on the structural response and damage of a building structure under construction after the sudden failure of one or more shores., The authors would like to express their gratitude to the Spanish Ministry of Education, Culture and Sport for funding received under: (a) the FPU Program [FPU13/02466] and complementary funding received for a stay at the University of Surrey (UK), and (b) the Mobility Program (Salvador de Madariaga 2017) of the Promotion of Talent and Employability within the state's Research & Innovation Program 2013-2016 [PRX17/00302]. The authors would like to thank Dr. P. Olmati who developed the prelimiundernary FE model of the structure at the operational stage as part of a project sponsored by the EPSRC Impact Acceleration Account held by the University of Surrey (grant ref: EP/ K503939) linked with a previous project funded by the EPSRC (grant ref: EP/K008153/1).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Processing and characterization of binary poly(hydroxybutyrate) (PHB) and poly(caprolactone) (PCL) blends with improved impact properties

  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Ferri, J.M|||0000-0002-1269-4973
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Balart, Rafael|||0000-0001-5670-7126
[EN] The present work is focused on the development of binary blends from poly(hydroxybutyrate) (PHB) and poly(caprolactone) (PCL). Miscibility, mechanical and thermal properties as well as blends morphology are evaluated in terms of the blend composition. Binary PHB PCL blends were manufactured by melt compounding in a twin screw co-rotating extruder and injection molded. The composition of PHB PCL covered the full range between individual polymers at 25 wt% increments. The obtained results show that PCL acts as an impact modifier, thus leading to an increase in flexibility and ductility as the PCL content in the PHB PCL blends increases with a noticeable increase in elongation at break and on the energy absorption in impact conditions. The tensile strength and the elastic modulus decrease with increasing PCL content in the PHB PCL blends; nevertheless, the flexural strength and the flexural modulus reach the highest values for the PHB PCL blends containing 25 wt% PCL, with a remarkable decrease over this composition. The analysis of fractured surfaces by field emission scanning electron microscopy and thermal properties obtained by differential scanning calorimetry (DSC) and TGA give clear evidences of the immiscibility of these two biodegradable polymers. Additionally, DSC results showed an increase in crystallinity of both PHB and PCL with regard to individual polymers for PHB PCL blends containing 25 wt% PCL. Furthermore, an increase in the degradation onset (T0) of about 30 C higher was detected for the same blends. Dynamic mechanical thermal analysis showed slightly shifted glass transition temperatures of each individual polymer, thus indicating that although both PHB and PCL are not fully miscible, some interactions between them occur., This research was supported by the Ministry of Economy and Competitiveness-MINECO, Ref: MAT2014-59242-C2-1-R. The authors also thank the "Conselleria d'Educacio, Cultura i Esport"-Generalitat Valenciana, Ref: GV/2014/008 for financial support. D. Garcia-Garcia thanks the Spanish Ministry of Education, Culture and Sports for their financial support through an FPU Grant (FPU13/06011).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of different compatibilizers on injection-molded green composite pieces based on polylactide filled with almond shell flour

  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Montanes, Nestor|||0000-0001-6070-127X
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Balart, Rafael|||0000-0001-5670-7126
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Carbonell-Verdu, A.
[EN] Green composites made of polylactide (PLA) filled with almond shell flour (ASF) at a constant weight content of 25¿wt.-% were manufactured by injection molding. In order to increase the interfacial adhesion between the biopolymer and the lignocellulosic fillers, three different compatibilizers were tested, namely multi-functional epoxy-based styrene-acrylic oligomer (ESAO), aromatic carbodiimide (AC), and maleinized linseed oil (MLO). The effect of each compatibilizer on the thermal, mechanical, and thermomechanical properties and water uptake of the injection-molded PLA/ASF pieces was analyzed. The obtained results indicated that all the here-studied compatibilizers had a positive influence on both the thermal stability and the mechanical and thermomechanical performance of the green composite pieces but low impact on their water uptake profile. In addition, the morphological analysis performed at the fracture surfaces of the green composite pieces revealed that the filler¿matrix gap was substantially reduced. Among the tested compatibilizers, ESAO and MLO yielded the highest performance in terms of mechanical strength and ductility, respectively. In the case of MLO, it also offers the advantage of being a plant-derived additive so that its application in green composites positively contributes to the development of sustainable polymer technologies., This research was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) program number MAT2014-59242-C2-1-R and AGL2015-63855-C2-1-R and Generalitat Valenciana (GV) program number GV/2014/008. A. Carbonell-Verdu wants to thank Universitat Politecnica de Valencia (UPV) for his FPI grant. D. Garcia-Garcia wants to thank the Spanish Ministry of Education, Culture and Sports (MECD) for his FPU grant (FPU13/06011). L. Quiles-Carrillo also wants to thank GV for his FPI grant (ACT/2016/182) and the MECD for his FPU grant (FPU15/03812).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Novel silicon microparticles to improve sunlight stability of raw polypropylene

  • Gil Castell, Óscar
  • Badía Valiente, José David
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Isabelle Rodriguez|||0000-0001-5479-2494
  • MESEGUER RICO, FRANCISCO JAVIER|||0000-0002-5541-9912
  • Ribes-Greus, A.|||0000-0003-2460-8291
Oxidation of polyolefins by ultraviolet/visible irradiation is a significant limitation for their use in several technological applications. The use of high-tech additives such as silicon microparticles becomes a compositing strategy that can improve the performance of these materials at long-term service conditions. Silicon particles were added to non-additivated raw polypropylene (PP) prepared by hot melt extrusion and subjected to accelerated sunlight irradiation tests. The stability of thermal properties, mechanical performance and thermal decomposition behaviour of composites was evaluated by differential scanning calorimetry, dynamic mechanical thermal analysis and thermogravimetry. This paper shows the potential of silicon microparticles to protect PP from degradation during both processing and accelerated sunlight irradiation. The addition of polydisperse silicon microparticles to the raw polypropylene preserved the appearance and improved the thermal behaviour, mechanical properties and thermal stability. It was found that silicon particles at 5 wt% provided a suitable protection of raw non-additivated PP against sunlight irradiation., B.Sc. A. Montesinos is acknowledged for his dedication in the lab and his outstanding attitude towards learning. Ph.D. L. Santonja-Blasco is thanked for revision of the work and endless and enjoyable discussions. The authors would like to acknowledge the Spanish Ministry of Economy and Competitiveness, through the Research Project MAT2012-3504. The Spanish Ministry of Education, Culture and Sports is also thanked for the predoctoral FPU grant of O. Gil-Castell (FPU13/01916). Generalitat Valenciana is thanked for the PROMETEOII/2014/026, the APOSTD 2014/041 of J.D. Badia and the GRISOLIA/2012/003 for R. Teruel-Juanes. Universitat Politecnica de Valencia is thanked for the support through the PAID-06-SP20120581 project and for the FPI grant of O. Gil-Castell. Repsol (Tarragona, Spain) is acknowledged for providing the raw polypropylene (PP) homopolymer.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Lung tumorspheres reveal cancer stem cell-like properties and a score with prognostic impact in resected non-small cell lung cancer

  • Herreros-Pomares, Alejandro|||0000-0003-3838-097X
  • Sirera Pérez, Rafael|||0000-0001-9162-8490
  • Jantus-Lewintre, Eloisa|||0000-0001-7395-4380
  • de Maya-Gironés, J.D.
  • Calabuig-Fariñas, Silvia
  • Lucas, Rut
  • Martínez-Romero, Alicia
  • Pardo-Sánchez, José Miguel
  • Alonso, Sergio
  • Blasco-Cordellat, Ana
  • Guijarro, Ricardo
  • Martorell, Miguel
  • Escorihuela, Eva
  • Chiara, María Dolores
  • Durendez-Saez, Elena
  • Gandía, Carolina
  • Forteza, Jerónimo
  • Farràs, Rosa
  • Camps-Herrero, Carlos
[EN] The high resistance against current therapies found in non-small-cell lung cancer (NSCLC) has been associated to cancer stem-like cells (CSCs), a population for which the identification of targets and biomarkers is still under development. In this study, primary cultures from early-stage NSCLC patients were established, using sphere-forming assays for CSC enrichment and adherent conditions for the control counterparts. Patient-derived tumorspheres showed self-renewal and unlimited exponential growth potentials, resistance against chemotherapeutic agents, invasion and differentiation capacities in vitro, and superior tumorigenic potential in vivo. Using quantitative PCR, gene expression profiles were analyzed and NANOG, NOTCH3, CD44, CDKN1A, SNAI1, and ITGA6 were selected to distinguish tumorspheres from adherent cells. Immunoblot and immunofluorescence analyses confirmed that proteins encoded by these genes were consistently increased in tumorspheres from adenocarcinoma patients and showed differential localization and expression patterns. The prognostic role of genes significantly overexpressed in tumorspheres was evaluated in a NSCLC cohort (N = 661) from The Cancer Genome Atlas. Based on a Cox regression analysis, CDKN1A, SNAI1, and ITGA6 were found to be associated with prognosis and used to calculate a gene expression score, named CSC score. Kaplan¿Meier survival analysis showed that patients with high CSC score have shorter overall survival (OS) in the entire cohort [37.7 vs. 60.4 months (mo), p = 0.001] and the adenocarcinoma subcohort [36.6 vs. 53.5 mo, p = 0.003], but not in the squamous cell carcinoma one. Multivariate analysis indicated that this gene expression score is an independent biomarker of prognosis for OS in both the entire cohort [hazard ratio (HR): 1.498; 95% confidence interval (CI), 1.167¿1.922; p = 0.001] and the adenocarcinoma subcohort [HR: 1.869; 95% CI, 1.275¿2.738; p = 0.001]. This score was also analyzed in an independent cohort of 114 adenocarcinoma patients, confirming its prognostic value [42.90 vs. not reached (NR) mo, p = 0.020]. In conclusion, our findings provide relevant prognostic information for lung adenocarcinoma patients and the basis for developing novel therapies. Further studies are required to identify suitable markers and targets for lung squamous cell carcinoma patients., This work was supported by Fondo de Investigación Sanitaria, ISCIII (PI12-02838, PI12-00956, PI15-00753, PI15-00209), and Fundación Arnal Planelles. A. H.-P. and J.M.P.-S. are supported by Ministerio de Educación, Cultura y Deporte (FPU14/06911 and FPU13/02755, respectively).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Campylobacter epidemiology from breeders to their progeny in Eastern Spain

  • Ingresa-Capaccioni, S
  • Jiménez Trigos, María Estrella
  • Català, Pablo
  • Vega García, Santiago
  • Marin Orenga, Clara
  • Marco-Jiménez, Francisco|||0000-0002-5226-4118
[EN] While horizontal transmission is a route clearly linked to the spread of Campylobacter at the farm level, few studies support the transmission of Campylobacter spp. from breeder flocks to their offspring. Thus, the present study was carried out to investigate the possibility of vertical transmission. Breeders were monitored from the time of housing day-old chicks, then throughout the laying period (0 to 60 wk) and throughout their progeny (broiler fattening, 1 to 42 d) until slaughter. All samples were analyzed according with official method ISO 10272:2006. Results revealed that on breeder farms, Campylobacter isolation started from wk 16 and reached its peak at wk 26, with 57.0% and 93.2% of positive birds, respectively. After this point, the rate of positive birds decreased slightly to 86.0% at 60 wk. However, in broiler production all day-old chicks were found negative for Campylobacter spp, and the bacteria was first isolated at d 14 of age (5.0%), with a significant increase in detection during the fattening period with 62% of Campylobacter positive animals at the end of the production cycle. Moreover, non-positive sample was determined from environmental sources. These results could be explained because Campylobacter may be in a low concentration or in a non-culturable form, as there were several studies that successfully detected Campylobacter DNA, but failed to culture. This form can survive in the environment and infect successive flocks; consequently, further studies are needed to develop more modern, practical, cost-effective and suitable techniques for routine diagnosis., We thank the ASAV (Valencian Poultry Association) and the Santander bank for the financial support of the project and the staff of the CECAV (Center for Poultry and Animal Feed Quality of the Valencian Region) for their assistance. Sofia Ingresa was supported by a research grant from the Spanish Ministry of Education (programme FPU13/03306). English text version was revised by N. Macowan English Language Service.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Improving the seismic behaviour of Reinforced Concrete Moment Resisting Frames by means of SMA bars and Ultra-High Performance Concrete

  • Navarro-Gómez, Alberto
  • Bonet Senach, José Luís|||0000-0002-6687-5307
[EN] In the design of concrete buildings in seismic zones, ductility is normally used to reduce design efforts and as a form of energy dissipation. This implies structural damage to buildings in the form of interstorey drifts that need to be subsequently repaired or demolished. Twelve moment resisting frames (MRF) were designed with different geometrical configurations and new materials, and shape memory alloy bars and ultra-high performance concrete were used in the critical zones of the structure to improve their seismic behaviour. MRFs were subjected to a non-linear static pushover analysis and an incremental dynamic analysis to assess their behaviour. To do so, six real accelerograms were selected to study the response of the 12 MRFs, scaled at increasing peak ground acceletation (PGA). The base shear, the building¿s overall plastic mechanism and the seismic response factors for the different geometrical and material combinations were analysed. The obtained values were compared with ASCE 7-05 and EC-8 proposals. It was concluded that the combination of shape memory alloys and ultra-high performance concrete allowed the behaviour factor to increase and residual drifts to decrease, which are advantages for both design and seismic behaviour., This article forms part of the research conducted at the Concrete Science and Technology Institute (ICITECH) of the Universitat Politecnica de Valencia (UPV). This work has been supported by the Spanish Ministry of Economy and Competitiveness through Project BIA2012-32645, and by the European Union through FEDER funds. The authors thank the Spanish Ministry of Education, Culture and Sport for Grant FPU13/06337.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Covalently crosslinked organophosphorous derivatives-chitosan hydrogel as a drug delivery system for oral administration of camptothecin

  • Martínez-Martínez, M.
  • Rodríguez Berna, Guillermo
  • Bermejo, Marival
  • Gonzalez-Alvarez, Isabel
  • Gonzalez -Alvarez, Marta
  • Merino, Virginia
[EN] Hydrogels are widely studied as drug delivery system. In this work we propose the employment of tetrakis (hydroxymethyl)phosphonium chloride as crosslinking agent to obtain covalent hydrogels based on chitosan. These hydrogels are obtained by Mannich reaction between the amino groups of chitosan with the hydroxymethyl groups of the crosslinker molecule. They show a pH sensitive second order swelling kinetic, have low toxicity, are biocompatible, mucoadhesive and allow a modified release of the encapsulated drug, camptothecin, for 48 h. This antitumor drug has been studied as a drug of interest to develop oral chemotherapy administration strategies. According to the obtained results, oral administration of camptothecin through hydrogels would provide low concentrations of drug at the absorption site, avoiding carrier saturation and reducing its intestinal toxicity., Authors acknowledge partial financial support to project SAF2016-78756 from MINECO (Spanish Ministry of economy, industry and competitivity). Mayte Martinez-Martínez received a grant from the Ministry of Education and Science of Spain (FPU13-01105).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Parallel Direct Solution of the Covariance-Localized Ensemble Square Root Kalman Filter Equations with Matrix Functions

  • Steward, Jeffrey L.
  • Aksoy, Altug
  • Jose E. Roman|||0000-0003-1144-6772
  • Lamas Daviña, Alejandro
[EN] Recently, the serial approach to solving the square root ensemble Kalman filter (ESRF) equations in the presence of covariance localization was found to depend on the order of observations. As shown previously, correctly updating the localized posterior covariance in serial requires additional effort and computational expense. A recent work by Steward et al. details an all-at-once direct method to solve the ESRF equations in parallel. This method uses the eigenvectors and eigenvalues of the forward observation covariance matrix to solve the difficult portion of the ESRF equations. The remaining assimilation is easily parallelized, and the analysis does not depend on the order of observations. While this allows for long localization lengths that would render local analysis methods inefficient, in theory, an eigenpair-based method scales as the cube number of observations, making it infeasible for large numbers of observations. In this work, we extend this method to use the theory of matrix functions to avoid eigenpair computations. The Arnoldi process is used to evaluate the covariance-localized ESRF equations on the reduced-order Krylov subspace basis. This method is shown to converge quickly and apparently regains a linear scaling with the number of observations. The method scales similarly to the widely used serial approach of Anderson and Collins in wall time but not in memory usage. To improve the memory usage issue, this method potentially can be used without an explicit matrix. In addition, hybrid ensemble and climatological covariances can be incorporated., This research was partially funded by the NOAA Hurricane Forecast Improvement Project Award NA14NWS4680022. This work was partially supported by Agencia Estatal de Investigacion (AEI) under Grant TIN2016-75985-P, which includes European Commission ERDF funds. Alejandro Lamas Davina was supported by the Spanish Ministry of Education, Culture and Sport through a grant with reference FPU13-06655. The fourth author's work was in part carried out under the auspices of CIMAS, a joint institute of the University of Miami and NOAA, Cooperative Agreement NA15OAR4320064. The authors acknowledge the NOAA Research and Development High Performance Computing Program for providing computing and storage resources that have contributed to the research results reported within this paper (http://rdhpcs.noaa.gov). We thank Jeff Anderson, Shu-Chih Yang, and three anonymous reviewers for their helpful comments and contributions. We also thank Hui Christophersen for providing technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Potentiometric C2H4-Selective Detection on Solid-State Sensors Activated with Bifunctional Catalytic Nanoparticles

  • Toldrá-Reig, Fidel|||0000-0001-6133-7043
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] This work presents a solid-state ionic-based device to selectively detect C2H4 in car exhaust gases. The sensor consists of 8YSZ as the electrolyte and two electrodes: Fe0.7Cr1.3O3/8YSZ and LSM/8YSZ. The main aim of this work is to optimize the catalytic behavior of the working electrode to C2H4 and reduce cross-sensitivity toward CO and H2O. Several catalyst nanoparticles were infiltrated to tailor C2H4 adsorption and electrochemical oxidation properties while diminishing adsorption and conversion of other gas components such as CO. The infiltrated metal catalysts were selected, taking into account both adsorption and redox properties. Infiltration of Ti or Al, followed by a second infiltration of Ni, enabled the selective detection of C2H4 with low cross-sensitivity toward CO and H2O in a moist gas environment. Further insight into potentiometric C2H4 sensing is achieved by electrochemical impedance analysis of the electrodes activated with bifunctional catalysts., FundingFunding from the Spanish Government (Grants FPU13/03478, AP-2003-03478, and RTI2018-102161) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Intelligent Playful Environments for Animals

  • Pons Tomás, Patricia
  • Catalá Bolós, Alejandro
  • Jaén Martínez, Francisco Javier|||0000-0002-8815-9643
We are evolving towards an interconnected and ubiquitous world, where digital devices and interfaces progressively adapt themselves to fit our needs and ease our daily activities. Although we coexist with plenty of animal species, such as our pets, we are approaching the evolution of technology in a strictly human-centric manner. A new field in Computer Science, called Animal-Computer Interaction (ACI), aims at filling this technological gap by developing systems and interfaces specifically designed for animals. Supporting animals' natural behavior and habits with suitable technology could improve both humans and animals' wellbeing. As a consequence, this doctoral research aims to explore, design and develop animal-centered intelligent systems that focus on enhancing one of the most natural animal behaviors: play. Therefore, the main goal of this research is to expand ACI with the ability of automatically manage and adapt animals play activity in order to improve their wellbeing., Work supported by MINECO (TIN2010-20488 and TIN2014-60077-R), UPV (UPV-FE-2014-24), MECD (FPU13/03831) and GVA (APOSTD/2013/013).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

KLT Based Interrogation Technique for FBG Multiplexed Sensor Tracking

  • Hervás-Peralta, Javier
  • Tosi, Daniele
  • García-Miquel, Héctor
  • Fernandez-Pousa, Carlos R.
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] The Karhunen-Loeve transform (KLT) is used to retrieve the wavelength information of several fiber Bragg gratings (FBGs) that are acting as a multiplexed sensor. The modulated light of a broadband source is launched to the FBG cascade in order to capture the electrical frequency response of the system. Thanks to a dispersive media, the wavelengths of the FBGs are mapped in radiofrequency (RF) delays. Wavelength changes are determined by the amplitude change of the samples in the impulse response, a change which is followed by the eigenvalue calculated by the KLT routine. The use of the KLT routine reduces by three orders of magnitude the amount of points needed to have a sub-degree resolution in temperature sensing, while keeping the accuracy almost intact., This work was supported in part by the Spanish MINECO through Project TEC2014-60378, and in part by the Government of Valencia through the Research Excellency Award Program GVA PROMETEO 2013/012. The work of J. Hervas was supported by the MECD FPU Scholarship (FPU13/04675).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optimized analysis of isotropic high-nuclearity spin clusters with GPU acceleration

  • Lamas Daviña, Alejandro
  • Ramos Peinado, Enrique|||0000-0002-5960-5501
  • Jose E. Roman|||0000-0003-1144-6772
The numerical simulation of molecular clusters formed by a finite number of exchange-coupled paramagnetic centers is very relevant for many applications, modeling systems between molecules and extended solids. In the context of realistic scenarios, many centers need to be considered, and thus the required computational effort grows very fast. In a previous work (Ramos et al., 2010), a set of parallel programs were presented with standard message-passing parallelization (MPI) for both anisotropic and isotropic systems. In this work, we have further developed the code for isotropic models. On one hand, the computational cost has been significantly reduced by avoiding some of the matrix diagonalizations, corresponding to blocks with negligible contribution for the particular configuration. On the other hand, we have extended the parallelization in order to exploit available graphics processing units (GPUs). The new MPI-GPU paradigm reduces the computational time by at least one additional order of magnitude and enables the resolution of larger problems. © 2016 Elsevier B.V. All rights reserved., This work was partially supported by the Spanish Ministry of Economy and Competitiveness under grant TIN2013-41049-P. Alejandro Lamas Davina was supported by the Spanish Ministry of Education, Culture and Sports through a grant with reference FPU13-06655.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Potential step voltammetry: An approach to corrosion rate measurement of reinforcements in concrete

  • Ramón, J.E.
  • Bataller Prats, Román
  • Soto Camino, Juan
  • Gandía-Romero, Jose M.|||0000-0003-0257-3286
  • Alcañiz Fillol, Miguel|||0000-0002-4579-9210
  • Valcuende Payá, Manuel Octavio|||0000-0002-9967-1554
[EN] This paper presents a Potentiostatic Step Voltammetry approach to corrosion rate measurement of reinforcements in concrete. We have termed this approach PSV-TE since it is based on the Tafel extrapolation method, but with the added advantage that long and slow potentiodynamic scans are no longer required to obtain the Tafel slopes. In this way, the irreversible polarization of rebars is prevented, so PSV-TE is considered to be a non-destructive method. The Tafel slopes are obtained by fitting the current-time response of the system to a theoretical model which we have outlined and validated previously. In this way, the concrete's electrical resistance and double layer capacity are also obtained. In this study, the optimal PSV-TE design has been established and validated on a range of reinforced concrete specimens. Results show minimal deviation between PSV-TE and reference methods. Therefore, PSV-TE is part of the corrosion monitoring system we have patented., This work was supported by a pre-doctoral scholarship granted to Jose Enrique Ramon Zamora by the Spanish Ministry of Science and Innovation [grant number FPU13/00911]. We would also like to acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through the national program of oriented research, development and innovation to societal challenges [project number BIA2016-78460-C3-3-R]. The research activity reported in this paper has been performed in the framework of the ReSHEALience project which has received funding from the European Union's Horizon 2020 research and innovation program [number 760824]. We extend our appreciation to Rafa Calabuig and Jesus Martinez, Material Laboratory technicians of the ETSIE of the Universitat Politecnica de Valencia, for their invaluable cooperation in the experimental work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization of selectively etched halloysite nanotubes by acid treatment

  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Ferri, J.M|||0000-0002-1269-4973
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Balart, Rafael|||0000-0001-5670-7126
  • Ripoll, L.
  • Hidalgo, M.
[EN] Halloysite nanotubes (HNTs) are a type of naturally occurring inorganic nanotubes that are characterized by a different composition between their external and internal walls. The internal walls are mainly composed of alumina whilst external walls are composed of silica. This particular structure offers a dual surface chemistry that allows different selective surface treatments which can be focused on increasing the lumen, increasing porosity, etc. In this work, HNTs were chemically treated with different acids (sulphuric, acetic and acrylic acid), for 72 h at a constant temperature of 50 °C. As per the obtained results, the treatment with sulphuric acid is highly aggressive and the particular shape of HNTs is almost lost, with a remarkable increase in porosity. The BET surface area increases from 52.9 (untreated HNTs) up to 132.4 m2 g&#8722;1 with sulphuric acid treatment, thus showing an interesting potential in the field of catalysis. On the other hand, the treatment with acetic acid led to milder effects with a noticeable increase in the lumen diameter that changed from 13.8 nm (untreated HNTs) up to 18.4 nm which the subsequent increase in the loading capacity by 77.8%. The aluminium content was measured by X-ray fluorescence (XRF) and laser induced breakdown spectroscopy (LIBS). The final results using two systems, suggest a good correlation between the acid strength and the aluminium reduction. Consequently, is possible to conclude that new applications for HNTs can be derived from selective etching with acids. Sulphuric acid widens the potential of HNTs in the field of catalysis while weak acids such as acetic and acrylic acids give a controlled and homogeneous lumen increase with the corresponding increase in the loading capacity., This work was supported by the Ministry of Economy and Competitiveness - MINECO [MAT2014-59242-C2-1-R]. D. Garcia-Garcia wants to thanks the Spanish Ministry of Education, Culture and Sports for their financial support through an FPU grant [FPU13/06011].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Customizing smart environments: a tabletop approach

  • Pons Tomás, Patricia
  • Catalá Bolós, Alejandro
  • Jaén Martínez, Francisco Javier|||0000-0002-8815-9643
Smart environments are becoming a reality in our society and the number of intelligent devices integrated in these spaces is in-creasing very rapidly. As the combination of intelligent elements will open a wide range of new opportunities to make our lives easier, final users should be provided with a simplified method of handling complex intelligent features. Specifying behavior in these environments can be difficult for non-experts, so that more efforts should be directed towards easing the customization tasks. This work presents an entirely visual rule editor based on dataflow expressions for interactive tabletops which allows be-havior to be specified in smart environments. An experiment was carried out aimed at evaluating the usability of the editor in terms of non-programmers understanding of the abstractions and concepts involved in the rule model, ease of use of the pro-posed visual interface and the suitability of the interaction mechanisms implemented in the editing tool. The study revealed that users with no previous programming experience were able to master the proposed rule model and editing tool for specifying be-havior in the context of a smart home, even though some minor usability issues were detected., We would like to thank all the volunteers that participated in the empirical study. Our thanks are also due to the ASIC/Polimedia team for their computer hardware support. This work was partially funded by the Spanish Ministry of Science and Innovation under the National R&D&I Program within the project CreateWorlds (TIN2010-20488). It also received support from a postdoctoral fellowship within the VALi+d Program of the Conselleria d'Educacio, Cultura I Esport (Generalitat Valenciana) awarded to Alejandro Catala (APOSTD/2013/013). The work of Patricia Pons has been supported by the Universitat Politecnica de Valencia under the "Beca de Excelencia" program, and currently by an FPU fellowship from the Spanish Ministry of Education, Culture and Sports (FPU13/03831).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization of electrochemical systems using potential step voltammetry. Part I: Modeling by means of equivalent circuits

  • Ramón Zamora, José Enrique
  • Fraile Muñoz, Rubén
  • Bataller Prats, Román
  • Soto Camino, Juan
  • Martínez-Ibernón, Ana|||0000-0003-2136-5650
  • Gandía-Romero, Jose M.|||0000-0003-0257-3286
  • Alcañiz Fillol, Miguel|||0000-0002-4579-9210
  • Garcia-Breijo, Eduardo|||0000-0002-9745-8485
[EN] Potential step voltammetry is used to characterize the resistive and capacitive properties of electrochemical systems. Within those systems, electrochemical processes are modeled by means of equivalent circuits (ECs). In this study, we established and experimentally validated algebraic expressions describing the electrical response of those ECs. We then analyzed the features that allow significant differentiation between the ECs. Finally, we have proposed a method to graphically visualize and analyze the electrical response of the circuit to a potential step sequence. The application of this method to real electrochemical systems will allow us to not only identify the electrochemical processes taking place in an experiment but to also assess parameters such as the double layer capacitance, the solution resistance, and the polarization resistance of the redox process., Financial support from the Spanish Government (FEDER project BIA2016-78460-C3-3-R, MAT2015-64139-C4-3-R and RTI2018-100910-B-C43 (MINECO/FEDER) projects) is gratefully acknowledged. The predoctoral scholarships granted to Ana Martinez Ibernon (FPU 16/00723) and to Jose Enrique Ramon Zamora within the program "Formacion de Profesorado Universitario'' from the Ministry of Education, Culture and Sport (FPU 13/00911) are also gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Plasticization effect of epoxidized cottonseed oil (ECSO) on poly(lactic acid)

  • Carbonell-Verdu, A.
  • Samper, María-Dolores|||0000-0002-5102-8412
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Balart, Rafael|||0000-0001-5670-7126
[EN] In this work, the use of an environmentally friendly plasticizer derived epoxidized cottonseed oil (ECSO) for poly(lactic acid) (PLA) is proposed. Melt extrusion was used to plasticize PLA formulations with different ECSO contents in the 0 - 10 wt.%. PLA formulation with 10 wt.% shows a remarkable increase in mechanical ductile properties with a percentage increase in elongation at break of more than 1100% and a noticeable increase in the impact absorbed energy. Differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA) revealed a clear decrease in the glass transition temperature of neat PLA as the ECSO content increased. Field emission scanning electron microscopy (FESEM) of fractured surfaces from impact tests showed an improvement of ductility with typical rough and porous topographies. Migration tests in n-hexane at different temperatures revealed very low migration properties thus leading to new interesting plasticizers for improved PLA industrial formulations., This research was supported by the Spanish Ministry of Economy and Competitiveness - MINECO, Ref: MAT2014-59242-C2-1-R. Authors also thank to "Conselleria d'Educacio, Cultura i Esport" - Generalitat Valenciana, Ref: GV/2014/008 for financial support. A. Carbonell-Verdu wants to thank Universitat Politecnica de Valencia for financial support through an FPI grant. D. Garcia-Garcia wants to thanks the Spanish Ministry of Education, Culture and Sports for their financial support through an FPU grant (FPU13/06011).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Scalable Block-Tridiagonal Eigensolvers in the Context of Electronic Structure Calculations

  • Lamas Daviña, Alejandro
  • Jose E. Roman|||0000-0003-1144-6772
  • Cartoixà, Xavier
[EN] In computer-based numerical simulations, some methods to determine the electronic and optical properties of semiconductor nanostructures, require computing the energies that correspond to the interior eigenvalues of a Hamiltonian matrix. We study the case in which the Schrödinger equation is expanded into a matrix that has a block-tridiagonal structure. Additionally, the matrix can have two extra non zero blocks in the corners due to periodic boundary conditions. Given that not the whole eigenspectrum is required, we choose to use projection methods to compute the necessary set of eigenvalues. The shift-and-invert Lanczos method requires to solve a linear system at each iteration. We have developed a parallel code that improves the scalability of this step by exploiting the block structure. Results show that, to solve these specific cases, this method offers better scalability when compared to a general-purpose solver such as MUMPS., The authors would like to acknowledge the support by Agencia Estatal de Investigacion under project TIN2016-75985-P, which includes European Commission ERDF funds, and the Spanish Ministerio de Economia y Competitividad under project No. TEC2015-67462-C2-1-R (MINECO/FEDER). Also, this work has received funding from the European Union¿s Horizon 2020 research and innovation program under grant agreement No 696656, and the Department d¿Universitats, Recerca i Societat de la Informacio of the Generalitat de Catalunya under contract 2014-SGR-384. Alejandro Lamas Davi¿na was supported by the Spanish Ministry of Education, Culture and Sport through grant FPU13-06655. The authors are also grateful for the resources provided by the Spanish Supercomputing Network.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Prediction of the level of astringency in persimmon using visible and near-infrared spectroscopy

  • Cortes-Lopez, Victoria
  • Blasco Ivars, José
  • Besada, Cristina
  • Cubero García, Sergio
  • Salvador, Alejandra
  • Rodriguez-Ortega, Alejandro|||0000-0003-4781-6368
  • Rey, Beatriz|||0000-0001-9213-1443
  • Talens Oliag, Pau|||0000-0001-7318-3336
  • Aleixos Borrás, María Nuria|||0000-0001-6051-3375
[EN] Early control of fruit quality requires reliable and rapid determination techniques. Therefore, the food industry has a growing interest in non-destructive methods such as spectroscopy. The aim of this study was to evaluate the feasibility of visible and near-infrared (NIR) spectroscopy, in combination with multivariate analysis techniques, to predict the level and changes of astringency in intact and in the flesh of half cut persimmon fruits. The fruits were harvested and exposed to different treatments with 95 % CO2 at 20 ºC for 0, 6, 12, 18 and 24 h to obtain samples with different levels of astringency. A set of 98 fruits was used to develop the predictive models based on their spectral data and another external set of 42 fruit samples was used to validate the models. The models were created using the partial least squares regression (PLSR), support vector machine (SVM) and least squares support vector machine (LS-SVM). In general, the models with the best performance were those which included standard normal variate (SNV) in the pre-processing. The best model was the PLSR developed with SNV along with the first derivative (1-Der) pre-processing, created using the data obtained at six measurement points of the intact fruits and all wavelengths (R2=0.904 and RPD=3.26). Later, a successive projection algorithm (SPA) was applied to select the most effective wavelengths (EWs). Using the six points of measurement of the intact fruit and SNV together with the direct orthogonal signal correction (DOSC) pre-processing in the NIR spectra, 41 EWs were selected, achieving an R2 of 0.915 and an RPD of 3.46 for the PLSR model. These results suggest that this technology has potential for use as a feasible and cost-effective method for the non-destructive determination of astringency in persimmon fruits., This work has been partially funded by the Institute Nacional de Investigacion y Tecnologia Agraria y Alimentaria de Espana (INIA) through research projects RTA2012-00062-004-01/03, RTA2013-00043-C02, and RTA2015-00078-00-00 with the support of European FEDER funds, and by the Conselleria d' Educacio, Investigacio, Cultura i Esport, Generalitat Valenciana, through the project AICO/2015/122. V. Cortes thanks the Spanish MEC for the FPU grant (FPU13/04202).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development and characterization of green composites from bio-based polyethylene and peanut shell

  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Jorda-Vilaplana, Amparo
  • Balart, Rafael|||0000-0001-5670-7126
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Carbonell Verdú, Alfredo
[EN] In the present work, different compatibilizers, namely polyethylene-graft-maleic anhydride (PE-g-MA), polypropylene-graftmaleic anhydride (PP-g-MA), and polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene-graft-maleic anhydride (SEBS-g-MA) were used on green composites derived from biobased polyethylene and peanut shell (PNS) flour to improve particle polymer interaction. Composites of high-density polyethylene/peanut shell powder (HDPE/PNS) with 10 wt % PNS flour were compatibilized with 3 wt % of the abovementioned compatibilizers. As per the results, PP-g-MA copolymer lead to best optimized properties as evidenced by mechanical characterization. In addition, best particle matrix interface interactions with PP-g-MA were observed by scanning electron microscopy (SEM). Subsequently HDPE/PNS composites with varying PNS flour content in the 5 30 wt % range with PP-g-MA compatibilizer were obtained by melt extrusion and compounding followed by injection molding and were characterized by mechanical, thermal, and morphological techniques. The results showed that PNS powder, leads to an increase in mechanical resistant properties (mainly, flexural modulus, and strength) while a decrease in mechanical ductile properties, that is, elongation at break and impact absorbed energy is observed with increasing PNS flour content. Furthermore, PNS flour provides an increase in thermal stability due to the natural antioxidant properties of PNS. In particular, composites containing 30 wt % PNS powder present a flexural strength 24% and a flexural modulus 72% higher than the unfilled polyethylene and the thermo-oxidative onset degradation temperature is increased from 232 8C up to 2548C thus indicating a marked thermal stabilization effect. Resultant composites can show a great deal of potential as base materials for wood plastic composites., This research was supported by the Ministry of Economy and Competitiveness -MINECO, Ref: MAT2014-59242-C2-1-R. Authors also thank to "Conselleria d'Educacio, Cultura i Esport" - Generalitat Valenciana, Ref: GV/2014/008 for financial support. A. Carbonell-Verdu wants to thank Universitat Politecnica de Valencia for financial support through an FPI grant. D. Garcia-Garcia wants to thanks the Spanish Ministry of Education, Culture and Sports for the financial support through an FPU grant (FPU13/06011).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

MPI-CUDA parallel linear solvers for block-tridiagonal matrices in the context of SLEPc&apos, s eigensolvers

  • Lamas Daviña, Alejandro
  • Jose E. Roman|||0000-0003-1144-6772
[EN] We consider the computation of a few eigenpairs of a generalized eigenvalue problem Ax = lambda Bx with block-tridiagonal matrices, not necessarily symmetric, in the context of Krylov methods. In this kind of computation, it is often necessary to solve a linear system of equations in each iteration of the eigensolver, for instance when B is not the identity matrix or when computing interior eigenvalues with the shift-and-invert spectral transformation. In this work, we aim to compare different direct linear solvers that can exploit the block-tridiagonal structure. Block cyclic reduction and the Spike algorithm are considered. A parallel implementation based on MPI is developed in the context of the SLEPc library. The use of GPU devices to accelerate local computations shows to be competitive for large block sizes., This work was supported by Agencia Estatal de Investigacion (AEI) under grant TIN2016-75985-P, which includes European Commission ERDF funds. Alejandro Lamas Davina was supported by the Spanish Ministry of Education, Culture and Sport through a grant with reference FPU13-06655.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Epitaxial Thin-Film vs Single Crystal Growth of 2D Hofmann-Type Iron(II) Materials: A Comparative Assessment of their Bi-Stable Spin Crossover Properties

  • Bartual-Murgui, Carlos
  • Rubio-Giménez, Victor
  • Meneses-Sánchez, Manuel
  • Valverde-Muñoz, Francisco Javier
  • Tatay, Sergio
  • Marti-Gastaldo, Carlos
  • Real, José Antonio
  • Muñoz Roca, María Del Carmen|||0000-0003-2630-3897
[EN] Integration of the ON-OFF cooperative spin crossover (SCO) properties of FeII coordination polymers as components of electronic and/or spintronic devices is currently an area of great interest for potential applications. This requires the selection and growth of thin films of the appropriate material onto selected substrates. In this context, two new series of cooperative SCO two-dimensional FeII coordination polymers of the Hofmann-type formulated {FeII(Pym)2[MII(CN)4]·xH2O}n and {FeII(Isoq)2[MII(CN)4]}n (Pym = pyrimidine, Isoq = isoquinoline; MII = Ni, Pd, Pt) have been synthesized, characterized, and the corresponding Pt derivatives selected for fabrication of thin films by liquid-phase epitaxy (LPE). At ambient pressure, variable-temperature single-crystal X-ray diffraction, magnetic, and calorimetric studies of the Pt and Pd microcrystalline materials of both series display strong cooperative thermal induced SCO properties. In contrast, this property is only observed for higher pressures in the Ni derivatives. The SCO behavior of the {FeII(L)2[PtII(CN)4]}n thin films (L = Pym, Isoq) were monitored by magnetization measurements in a SQUID magnetometer and compared with the homologous samples of the previously reported isostructural {FeII(Py)2[PtII(CN)4]}n (Py = pyridine). Application of the theory of regular solutions to the SCO of the three derivatives allowed us to evaluate the effect on the characteristic SCO temperatures and the hysteresis, as well as the associated thermodynamic parameters when moving from microcrystalline bulk solids to nanometric thin films., We thank the Spanish Ministerio de Economia y Competitividad (MINECO) and FEDER funds (CTQ2016-78341-P, CTQ2017-83486-P, RTI2018-098568-A-100 and Unidad de Excelencia Maria de Maeztu MDM-2015-0538), Generalitat Valenciana (PROMETEO/2016/147) and EU Framework FET-OPEN project COSMICS (grant agreement 766726) and ERC Stg Chem-fs-MOF (714122). S.T. thanks the Ramon y Cajal Fellowship (RYC-2016-19817). V.R.-G. thanks the Spanish Ministerio de Ciencia, Innovacion y Universidades (MCIU) for his FPU (FPU13/03203) predoctoral fellowship. FJVM and MMS thank MINECO for a predoctoral FPI grant. The atomic spectroscopy section of SCSIE (Universitat deValencia) is gratefully acknowledged for the Elemental CHNSO analysis. We also thank Francisco Palazon for his assistance with GIXRD measurements and Alejandra SorianoPortillo and Angel Lopez-Muñoz for their technical support
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Discrimination of intact almonds according to their bitterness and prediction of amygdalin concentration by Fourier transform infrared spectroscopy

  • Cortes-Lopez, Victoria
  • Lerma-García, María Jesús
  • Talens Oliag, Pau|||0000-0001-7318-3336
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
[EN] Intact almond kernels (N¿=¿360, half sweet and half bitter) were analyzed using attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) for the prediction of amygdalin concentration and to classify them according to their bitterness. Amygdalin concentrations for sweet and bitter almonds, determined by high performance liquid chromatography, were between 0.7¿350 and 15,000-50,000¿mg kg¿1, respectively. Concentrations were successfully predicted by applying partial least squares (PLS) to the pre-treated spectral data with R2p of 0.951 and RMSEP of 0.398. Additionally, linear discriminant analysis (LDA), quadratic discriminant analysis (QDA) and PLS-DA models were constructed to classify samples according to their bitterness. All three models provided a satisfactory discrimination of almonds into sweet and bitter categories, providing overall accuracy values of 83.3%, 86.1% and 98.6%, respectively. The results indicate the potential of ATR-FTIR spectroscopy for the reliable, easy and fast prediction of amygdalin concentration, and for almond classification according to their bitterness., Victoria Cortés López thanks the Spanish Ministry of Education, Culture and Sports for the FPU grant (FPU13/04202). The authors wish to thank the cooperative Agricoop for kindly donating the almonds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of the dissolution time into an acid hydrolytic solvent to taylor electrospun nanofibrous polycaprolactone scaffolds

  • Gil-Castell, O.
  • Badia, J.D.
  • Strömberg, E.
  • Karlsson, S.
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] The hydrolysis of the polycaprolactone (PCL) as a function of the dissolution time in a formic/acetic acid mixture was considered as a method for tailoring the morphology of nanofibrous PCL scaffolds. Hence the aim of this research was to establish a correlation between the dissolution time of the polymer in the acid solvent with the physicochemical properties of the electrospun nanofibrous scaffolds and their further service life behaviour. The physico-chemical properties of the scaffolds were assessed in terms of fibre morphology molar mass and thermal behaviour. A reduction of the molar mass and the lamellar thickness as well as an increase of the crystallinity degree were observed as a function of dissolution time. Bead-free fibres were found after 24 and 48 h of dissolution time with similar diameter distributions. The decrease of the fibre diameter distributions along with the apparition of beads was especially significant for scaffolds prepared after 72 h and 120 h of dissolution time in the acid mixture. The service life of the obtained devices was evaluated by means of in vitro validation under abiotic physiological conditions. All the scaffolds maintained the nanofibrous structure after 100 days of immersion in water and PBS. The molar mass was barely affected and the crystallinity degree and the lamellar thickness increased along immersion preventing scaffolds from degradation. Scaffolds prepared after 24 h and 48 h kept their fibre diameters whereas those prepared after 72 h and 120 h showed a significant reduction. This PCL tailoring procedure to obtain scaffolds that maintain the nanoscaled structure after such long in vitro evaluation will bring new opportunities in the design of long-term biomedical patches. (C) 2016 Elsevier Ltd. All rights reserved., The European Regional Development Funds and the Spanish Ministry of Economy and Competitiveness are acknowledged for the projects POLYCELL (ENE2014-53734-C2-1-R) and UPOV13-3E-1947. The Spanish Ministry of Education, Culture and Sports is thanked for the pre-doctoral FPU grant of O. Gil-Castell (FPU13/01916) and the scholarship for a research stage of 0. Gil-Castell in Kungliga Tekniska Hogskolan (KTH). Generalitat Valenciana is thanked for the APOSTD/2014/041 for J.D. Badia. Universitat de Valencia (UV) and HS LaFe are acknowledged for the DERMASAFE project. The financial support given by the ICTH Royal Institute of Technology and the Universitat Politecnica de Valencia (UPV) are gratefully acknowledged. IESMAT S.A. and Malvern Instruments Ltd are recognised for their grateful collaboration.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Link-Level Functional Connectivity Neuroalterations in Autism Spectrum Disorder: A Developmental Resting-State fMRI Study

  • Borràs-Ferrís, Lluis
  • Pérez-Ramírez, María Úrsula
  • Moratal, David|||0000-0002-2825-3646
[EN] Autism spectrum disorder (ASD) is a neurological and developmental disorder whose late diagnosis is based on subjective tests. In seeking for earlier diagnosis, we aimed to find objective biomarkers via analysis of resting-state functional MRI (rs-fMRI) images obtained from the Autism Brain Image Data Exchange (ABIDE) database. Thus, we estimated brain functional connectivity (FC) between pairs of regions as the statistical dependence between their neural-related blood-oxygen-level-dependent (BOLD) signals. We compared FC of individuals with ASD and healthy controls, matched by age and intelligence quotient (IQ), and split into three age groups (50 children, 98 adolescents, and 32 adults), from a developmental perspective. After estimating the correlation, we observed hypoconnectivities in children and adolescents with ASD between regions belonging to the default mode network (DMN). Concretely, in children, FC decreased between the left middle temporal gyrus and right frontal pole (p = 0.0080), and between the left orbitofrontal cortex and right superior frontal gyrus (p = 0.0144). In adolescents, this decrease was observed between bilateral postcentral gyri (p = 0.0012), and between the right precuneus and right middle temporal gyrus (p = 0.0236). These results help to gain a better understanding of the involved regions on autism and its connection with the affected superior cognitive brain functions., This research was partially funded by the Ministerio de Economia y Competitividad (MINECO), through the project BFU2015-64380-C2-2-R. U.P.-R. is funded by the Spanish Ministerio de Educacion, Cultura y Deporte (MECD) under grant FPU13/03537. We are thankful to the initiative ABIDE to provide the huge public release and open sharing autism database what has made possible to carry out this study in better conditions and improve the results obtained significantly.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Plasticization effects of epoxidized vegetable oils on mechanical properties of poly(3-hydroxybutyrate)

  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Ferri, J.M|||0000-0002-1269-4973
  • Montanes, Nestor|||0000-0001-6070-127X
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Balart, Rafael|||0000-0001-5670-7126
The effect of various epoxidized vegetable oils as potential plasticizers for poly(3-hydroxybutyrate) (PHB) was evaluated in terms of changes in mechanical and thermal properties and morphology. PHB is a biodegradable aliphatic polyester obtained from bacterial fermentation. High stiffness and fragility are two of its main drawbacks. To overcome this behaviour, PHB was plasticized with various amounts of two different epoxidized vegetable oils: epoxidized linseed oil (ELO) and epoxidized soybean oil (ESBO). The total ELO and ESBO content varied in the range 5 phr (per hundred resin) to 20 phr and plasticized PHB materials were obtained by melt extrusion and compounding followed by injection moulding. The results show that the plasticizing effect provided by ELO is more efficient than that by ESBO with balanced properties at a concentration of 10 phr ELO. ELO addition leads to an improvement in mechanical ductile properties with a noticeable increase in elongation at break and impact absorbed energy. With regard to thermal properties, the addition of both ELO and ESBO leads to a marked increase in thermal stability of PHB. All these findings suggest that addition of 10 phr ELO leads to optimized PHB formulations with potential uses in technical applications. (c) 2016 Society of Chemical Industry, This research was supported by the Ministry of Economy and Competitiveness-MINECO, Ref. MAT2014-59242-C2-1-R. The authors also thank the Conselleria d'Educacio, Cultura i Esport -Generalitat Valenciana, Ref. GV/2014/008, for financial support. DG-G thanks the Spanish Ministry of Education, Culture and Sports for financial support through an FPU grant (FPU13/06011).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Tailored electrospun nanofibrous polycaprolactone/gelatin scaffolds into an acid hydrolytic solvent system

  • Gil-Castell, O.
  • Badia, J.D.
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] Blended nanofibrous scaffolds based on polycaprolactone (PCL) and gelatin (Ge) were successfully prepared. A formic/acetic acid (1:1) mixture was used to dissolve PCL/Ge blends from 100/0 to 20/80 %wt in steps of 10 %wt. The hydrolysis of the PCL diluted in the formic/acetic acid mixture was considered as a method for tailoring the surface morphology and physicochemical features of the nanofibrous PCL/Ge scaffolds as a function of the dissolution time. The fibre diameter remained in the nanoscale range for all the studied scaffolds, which is crucial to mimic the extra-cellular matrix size. The reduction of the intrinsic viscosity, molar mass and hydrodynamic radius found for the PCL molecules as a function of the dissolution time, consequently diminished the entanglement capability of the polymeric chains. Subsequently, the fibre diameter decreased as dissolution time increased, for all the studied compositions. While the crystallinity of the scaffolds with high PCL content increased as a function of the dissolution time, the scaffolds with high percentage of Ge showed the lowest crystallinity degree, which was ascribed to the hindering effect of the Ge diffused among the PCL segments. The wettability increased as a function of the Ge content due to the high hydrophilic behaviour of these molecules. It also increased as a function of the dissolution time, due to the more hydroxyl groups available in PCL segments to interact with water molecules. As a whole, the physicochemical assessment of the electrospun scaffolds revealed an effective tailoring procedure to obtain functionalised PCL/Ge scaffolds with specific properties as a function of the dissolution time before electrospinning., The Spanish Ministry of Economy and Competitiveness is acknowledged for the projects POLYCELL (ENE2014-53734-C2-1-R), POLYDECARBOCELL (ENE2017-86711-C3-1-R) and UPOV13-3E-1947. The Spanish Ministry of Education, Culture and Sports is thanked for the pre-doctoral FPU grant of O. Gil-Castell (FPU13/01916). Generalitat Valenciana is thanked for the APOSTD/2014/041 for J.D. Badia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design of synthetic EGR and simulation study of the effect of simplified formulations on the ignition delay of isooctane and n-heptane

  • Desantes J.M.|||0000-0002-4124-9393
  • López, J. Javier|||0000-0002-9486-2511
  • Molina, Santiago|||0000-0001-7879-2421
  • López Pintor, Darío
[EN] A method to create synthetic mixtures that simulate the Exhaust Gas Recirculation (EGR) of an internal combustion engine, using O2, N2, CO2, H2O and Ar, has been designed. Different simplifications of this synthetic EGR have been validated in order to reproduce ignition delays. To do this, a parametric study has been carried out with CHEMKIN. The ignition delay of each simplified mixture and the ignition delay of the complete mixture have been simulated for different initial pressures, temperatures, equivalence ratios, oxygen mass fractions and for two different fuels, isooctane and n-heptane. The results obtained with each simplification have been compared with the results obtained with the complete EGR, and based on this comparison the errors in ignition delay have been calculated. The behavior of the errors in ignition delay with the variation of the different parameters of the simulations has been studied. In summary, it can be seen that the relative error increases with temperature and decreases with pressure, equivalence ratio and oxygen mass fraction. Finally, the limit oxygen mass fractions for the use of each simplification have been obtained. Based on these results, it can be concluded that the only gas that can be obviated to keep the error in ignition delay under 1% is Ar, The authors would like to thank different members of the CMT-Motores Termicos team of the Universitat Politecnica de Valencia for their contribution to this work. The authors would also like to thank the Spanish Ministry of Education for financing the PhD. Studies of Dario Lepez-Pintor (Grant FPU13/02329). This work was partly founded by the Generalitat Valenciana, project PROMETEOII/2014/043.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

In-line Application of Visible and Near-Infrared Diffuse Reflectance Spectroscopy to Identify Apple Varieties

  • Cortes-Lopez, Victoria
  • Cubero-García, Sergio
  • BLASCO IVARS, JOSE
  • Aleixos Borrás, María Nuria|||0000-0001-6051-3375
  • Talens Oliag, Pau|||0000-0001-7318-3336
[EN] One of the most studied techniques for the non-destructive determination of the internal quality of fruits has been visible and nearinfrared (VIS-NIR) reflectance spectroscopy. This work evaluates a new non-destructive in-line VIS-NIR spectroscopy prototype for in-line identification of five apple varieties, with the advantage that it allows the spectra to be captured with the probe at the same distance from all the fruits regardless of their size. The prototype was tested using varieties with a similar appearance by acquiring the diffuse reflectance spectrum of the fruits travelling on the conveyor belt at a speed of 0.81 m/s which is nearly 1 fruit/s. Principal component analysis (PCA) was used to determine the variables that explain the most variance in the spectra. Seven principal components were then used to perform linear discriminant analysis (LDA) and quadratic discriminant analysis (QDA). QDA was found to be the best in-line classification method, achieving 98% and 85% success rates for red and yellow apple varieties, respectively. The results indicated that the in-line application of VIS-NIR spectroscopy that was developed is potentially feasible for the detection of apple varieties with an accuracy that is similar to or better than a laboratory system., This work was partially funded by the Generalitat Valenciana through project AICO/2015/122 and by INIA and FEDER funds through project RTA2015-00078-00-00. Victoria Cortes Lopez thanks the Spanish Ministry of Education, Culture and Sports for FPU grant (FPU13/04202).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Structural and functional, empirical and modeled connectivity in the cerebral cortex of the rat

  • Díaz-Parra, Antonio
  • Osborn, Z.
  • Canals Gamoneda, Santiago
  • Sporns, O.
  • Moratal, David|||0000-0002-2825-3646
[EN] Connectomics data from animal models provide an invaluable opportunity to reveal the complex interplay between structure and function in the mammalian brain. In this work, we investigate the relationship between structural and functional connectivity in the rat brain cortex using a directed anatomical network generated from a carefully curated meta-analysis of published tracing data, along with resting-state functional MRI data obtained from a group of 14 anesthetized Wistar rats. We found a high correspondence between the strength of functional connections, measured as blood oxygen level dependent (BOLD) signal correlations between cortical regions, and the weight of the corresponding anatomical links in the connectome graph (maximum Spearman rank-order correlation rho = 0.48). At the network-level, regions belonging to the same functionally defined community tend to form more mutual weighted connections between each other compared to regions located in different communities. We further found that functional communities in resting-state networks are enriched in densely connected anatomical motifs. Importantly, these higher-order structural subgraphs cannot be explained by lower-order topological properties, suggesting that dense structural patterns support functional associations in the resting brain. Simulations of brain-wide resting-state activity based on neural mass models implemented on the empirical rat anatomical connectome demonstrated high correlation between the simulated and the measured functional connectivity (maximum Pearson correlation rho = 0: 53), further suggesting that the topology of structural connections plays an important role in shaping functional cortical networks., This work was supported in part by the Spanish Ministerio de Economia y Competitividad (MINECO) and FEDER funds under grants BFU2015-64380-C2-1-R (S.C) and BFU2015-64380-C2-2-R (D.M.) and EU Horizon 2020 Program 668863-SyBil-AA grant (S.C.). S.C. acknowledges financial support from the Spanish State Research Agency, through the "Severo Ochoa" Programme for Centres of Excellence in R&D (ref. SEV-2013-0317). A. D.-P., was supported by grant FPU13/01475 from the Spanish Ministerio de Educacion, Cultura y Deporte (MECD). O.S. acknowledges support by the J.S. McDonnell Foundation (#220020387) and the National Institutes of Health (NIH R01 AT009036-01). We are also grateful to Andrea Avena-Koenigsberger and Begona Fernandez for their technical support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Load transmission between slabs and shores during the construction of RC building structures A review

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Adam, Jose M|||0000-0002-9205-8458
  • Moragues, Juan J|||0000-0001-8111-5480
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
[EN] Shoring successive floors is at present the most frequently used technique when constructing reinforced concrete (RC) building structures. This technique allows the recently poured slabs to be supported by the lower slabs by means of shores. Considering the particular characteristics of shoring successive floors, it is very important to be able to estimate how loads are transmitted between shores and slabs in order to maintain adequate structural safety and avoid situations of risk or even collapse in buildings under construction. The transmission of loads from shores to slabs during all the construction stages is a complex phenomenon and has been the subject of numerous studies, especially in recent years. The research carried out to date has included experiments on fullscale buildings and the development of advanced numerical models, the estimation of the loads acting on slabs during construction, the definition of simplified calculation methods to estimate loads on slabs and shores during building construction and estimating the appropriate construction times taking into account the evolution of the mechanical properties of early-age concrete. This paper was conceived in order to give an answer to: (1) advances in the field of constructing RC building structures, (2) the growing interest of the scientific community, and (3) the need for the structural and construction engineering sector to have the tools available to increase the safety and design of building construction processes. The paper is unique in the field of RC building structures in that it is the widest, most complete and most ambitious review carried out to date and includes the most important advances in the study of slab-shore load transmissions. This work will be of interest to researchers who wish to go deeper into the field of building construction, and to more experienced professionals who require all the up-to-date information in a single document. However, engineers, architects and builders could also find the paper an excellent guide that will help them to improve their daily work in the field of designing and constructing buildings., The authors would like to express their gratitude to the Spanish Ministry of Education, Culture and Sport for funding received under the FPU Program [FPU13/02466] and also to the Generalitat Valenciana [GV/2015/063].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An approach to geometric optimisation of railway catenaries

  • Gregori Verdú, Santiago|||0000-0002-0483-3531
  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Nadal, Enrique|||0000-0002-2808-298X
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
[EN] The quality of current collection becomes a limiting factor when the aim is to increase the speed of the present railway systems. In this work an attempt is made to improve current collection quality optimising catenary geometry by means of a genetic algorithm (GA). As contact wire height and dropper spacing are thought to be highly influential parameters, they are chosen as the optimisation variables. The results obtained show that a GA can be used to optimise catenary geometry to improve current collection quality measured in terms of the standard deviation of the contact force. Furthermore, it is highlighted that apart from the usual pre-sag, other geometric parameters should also be taken into account when designing railway catenaries., The authors would like to acknowledge the financial support received from the FPU program offered by the Ministerio de Educación, Cultura y Deporte (MECD), under grant number [FPU13/04191], and also the funding provided by the Generalitat Valenciana [PROMETEO/2016/007].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ionic Hydrogel Based on Chitosan Cross-Linked with 6-Phosphogluconic Trisodium Salt as a Drug Delivery System

  • Martínez Martínez, Mayte
  • Rodríguez Berna, Guillermo
  • Gonzalez-Alvarez, Isabel
  • Hernández, María Jesús
  • Bermejo, Marival
  • Merino Sanjuán, Virginia
  • Gonzalez -Alvarez, Marta
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] In this work, 6-phosphogluconic trisodium salt (6-PG(-)Na(+)) is introduced as a new aqueous and nontoxic cross-linking agent to obtain ionic hydrogels. Here, it is shown the formation of hydrogels based on chitosan cross-linked with 6-PG(-)Na(+). This formulation is obtained by ionic interaction of cationic groups of polymer with anionic groups of the cross linker. These hydrogels are nontoxic, do not cause dermal irritation, are easy to extend, and have an adequate adhesion force to be applied as polymeric film over the skin. This AWN formulation exhibits a first order release kinetic and can be applied as drug vehicle for topical administration or as wound dressing for wound healing. The primary goal of this communication is to report the identification and utility of 6-phosphogluconic trisodium salt (6-PG(-)Na(+)) as a nontoxic cross-linker applicable for cationic polymers., The authors acknowledge partial financial support to project SAF2016-78756 from MINECO (Spanish Ministry of economy, industry and competitiveness). Maria Teresa Martinez Martinez received a grant from the Ministry of Education and Science of Spain (FPU13-01105). The product was patented in Spain in 2016 by authors of this paper. Patent application 201631463.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Impact of high dietary plant protein with or without marine ingredients in gut mucosa proteome of gilthead seabream (Sparus aurata, L.)

  • Estruch, Guillem
  • Monge-Ortiz, Raquel
  • Brown, Paul B.
  • Martínez-Llorens, Silvia|||0000-0002-9824-3267
  • Tomas-Vidal, A.|||0000-0002-2985-9324
  • Jover Cerda, Miguel|||0000-0001-9049-0573
  • Peñaranda, D.S.|||0000-0002-0861-976X
[EN] The digestive tract, particularly the intestine, represents one of the main sites of interactions with the environment, playing the gut mucosa a crucial role in the digestion and absorption of nutrients, and in the immune defence. Previous researches have proven that the fishmeal replacement by plant sources could have an impact on the intestinal status at both digestive and immune level, compromising relevant productive parameters, such as feed efficiency, growth or survival. In order to evaluate the long-term impact of total fishmeal replacement on intestinal mucosa, the gut mucosa proteome was analysed in fish fed with a fishmeal-based diet, against plant protein-based diets with or without alternative marine sources inclusion. Total fishmeal replacement without marine ingredients inclusion, reported a negative impact in growth and biometric parameters, further an altered gut mucosa proteome. However, the inclusion of a low percentage of marine ingredients in plant protein-based diets was able to maintain the growth, biometrics parameters and gut mucosa proteome with similar values to FM group. A total fishmeal replacement induced a big set of underrepresented proteins in relation to several biological processes such as intracellular transport, assembly of cellular macrocomplex, protein localization and protein catabolism, as well as several molecular functions, mainly related with binding to different molecules and the maintenance of the cytoskeleton structure. The set of downregulated proteins also included molecules which have a crucial role in the maintenance of the normal function of the enterocytes, and therefore, of the epithelium, including permeability, immune and inflammatory response regulation and nutritional absorption. Possibly, the amino acid imbalance presented in VM diet, in a long-term feeding, may be the main reason of these alterations, which can be prevented by the inclusion of 15% of alternative marine sources. Significance: Long-term feeding with plant protein based diets may be considered as a stress factor and lead to a negative impact on digestive and immune system mechanisms at the gut, that can become apparent in a reduced fish performance. The need for fishmeal replacement by alternative ingredients such as plant sources to ensure the sustainability of the aquaculture sector has led the research assessing the intestinal status of fish to be of increasing importance. This scientific work provides further knowledge about the proteins and biologic processes altered in the gut in response to plant protein based diets, suggesting the loss of part of gut mucosa functionality. Nevertheless, the inclusion of alternative marine ingredients was able to reverse these negative effects, showing as a feasible option to develop sustainable aquafeeds., The first author was supported by a contract-grant (Contrato Pre doctoral para la Formacion de Profesorado Universitario) from Subprogramas de Formacion y Movilidad within the Programa Estatal de Promocion del Talento y su Empleabilidad of the Ministerio de Educacion, Cultura y Deporte of Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sweet and nonsweet taste discrimination of nectarines using visible and near-infrared spectroscopy

  • Cortes-Lopez, Victoria
  • Cubero, Sergio
  • Blasco Ivars, José
  • Aleixos Borrás, María Nuria|||0000-0001-6051-3375
  • Talens Oliag, Pau|||0000-0001-7318-3336
[EN] The feasibility of using visible and near-infrared spectroscopy technology combined with multivariate analysis to discriminate cv. 'Big Top' and cv. 'Diamond Ray' nectarines has been studied. These varieties are very difficult to differentiate visually on the production line but show important differences in taste that affects the acceptance by final consumers. The relationship between the diffuse reflectance spectra and the two nectarine varieties was established. Five hundred nectarine samples (250 of each variety) were used for the study. Tests were performed by using a spectrometer capable of measuring in two different spectral ranges (600-1100 nm and 900-1700 nm). These spectral ranges were used to develop two accurate classification models based on linear discriminate analysis (LDA) and partial least squares discriminate analysis (PLS-DA). Later, selection techniques were applied to select the most effective wavelengths. The results showed that the PLS-DA model achieved better accuracy and less latent variables than LDA model, and specifically, good results with 100% classification accuracy were obtained using only the 600-1100 nm spectral range for the two models and eight selected wavelengths. These results places visible and near-infrared spectrocopy as an accurate classification tool for nectarine varieties with a very similar appearance but different tastes that could be potentially used in an automated inspection system., This work was partially funded by the Generalitat Valenciana through the project AICO/2015/122 and by the INIA and FEDER funds through projects RTA2012-00062-C04-03 and RTA2015-00078-00-00. Victoria Cortes Lopez thanks the Spanish Ministry of Education, Culture and Sports for the FPU grant (FPU13/04202). The authors wish to thank the cooperative 'Fruits de Ponent' for providing the fruit.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Correlations for the ignition characteristics of six different fuels and their application to predict ignition delays under transient thermodynami conditions

  • Desantes J.M.|||0000-0002-4124-9393
  • Bermúdez, Vicente|||0000-0002-2781-5598
  • López, J. Javier|||0000-0002-9486-2511
  • López-Pintor, Darío
[EN] The ignition characteristics of six different fuels have been correlated as a function of the temperature, pressure, equivalence ratio and oxygen molar fraction in this investigation. More specifically, the ignition delay referred to cool flames, the high-temperature ignition delay and the critical concentrations and ignition times of HO2 and CH2O have been parameterized for n-dodecane, PRFO, PRF25, PRF50, PRF75 and PRF100. To do so, a wide database of ignition data of the aforementioned fuels has been generated by means of chemical simulations in CHEMKIN, solving a detailed mechanism for PRF mixtures and a reduced mechanism for n-dodecane. In fact, in cylinder engine-like conditions reached in a Rapid Compression Expansion Machine (RCEM) have been replicated. The mathematical correlations have shown a relative deviation around 20% with the database in the low-temperature, low-pressure zone, which is the typical accuracy of usual correlations for the ignition delay. Finally, the ignition delay under transient conditions measured in the RCEM has been predicted by means of different integral methods coupled to both the proposed correlations and the generated database. It has been found that deviations between the predictions obtained with the correlations or with the database are lower than 1%. This means that the correlations are accurate enough to predict the ignition time in spite of showing high deviation with the database, since the low-temperature, low-pressure zone has a minor contribution to the ignition delay., The authors would like to thank different members of the CMT-Motores Termicos team of the Universitat Politecnica de Valencia for their contribution to this work. The authors would also like to thank the Spanish Ministry of Education for financing the PhD. Studies of Dario Lopez-Pintor (grant FPU13/02329). This research has been partially funded by FEDER and the Spanish Government through project TRA2015-67136-R.