Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 30
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Plasmonic nanoparticle sensors, current progress, challenges, and future prospects

  • Kant, Krishna
  • Beeram, Reshma
  • Cao, Yi
  • dos Santos, Paulo S. S.
  • González-Cabaleiro, Lara
  • García-Lojo, Daniel|||0000-0002-5477-6299
  • Guo, Heng
  • Joung, Younju
  • Kothadiya, Siddhant
  • Lafuente, Marta|||0000-0003-2660-3726
  • Leong, Yong Xiang
  • Liu, Yiyi
  • Liu, Yuxiong
  • Moram, Sree Satya Bharati
  • Mahasivam, Sanje|||0000-0001-9975-3659
  • Maniappan, Sonia
  • Quesada-González, Daniel|||0000-0003-3064-2146
  • Raj, Divakar
  • Weerathunge, Pabudi
  • Xia, Xinyue
  • Yu, Qian
  • Abalde-Cela, Sara
  • Álvarez Puebla, Ramon A.|||0000-0003-4770-5756
  • Bardhan, Rizia|||0000-0002-5854-652X
  • Bansal, Vipul|||0000-0002-3354-4317
  • Choo, Jaebum|||0000-0003-3864-6459
  • Coelho, Luis C. C.
  • de Almeida, José M. M. M.|||0000-0003-3810-5943
  • Gómez-Graña, Sergio
  • Grzelczak, Marek
  • Herves, Pablo
  • Kumar, Jatish|||0000-0003-3078-6297
  • Lohmueller, Theobald|||0000-0003-2699-7067
  • Merkoçi, Arben|||0000-0003-2486-8085
  • Montaño-Priede, José Luis
  • Ling, Xing Yi|||0000-0001-5495-6428
  • Mallada, Reyes
  • Pérez-Juste, Jorge|||0000-0002-4614-1699
  • Pina, María P.|||0000-0001-9897-6527
  • Singamaneni, Srikanth|||0000-0002-7203-2613
  • Soma, Venugopal Rao
  • Sun, Mengtao|||0000-0002-8153-2679
  • Tian, Limei|||0000-0002-1931-8567
  • Wang, Jianfang|||0000-0002-2467-8751
  • Polavarapu, Lakshminarayana
  • Santos, Isabel Pastoriza|||0000-0002-1091-1364
Plasmonic nanoparticles (NPs) have played a significant role in the evolution of modern nanoscience and nanotechnology in terms of colloidal synthesis, general understanding of nanocrystal growth mechanisms, and their impact in a wide range of applications. They exhibit strong visible colors due to localized surface plasmon resonance (LSPR) that depends on their size, shape, composition, and the surrounding dielectric environment. Under resonant excitation, the LSPR of plasmonic NPs leads to a strong field enhancement near their surfaces and thus enhances various light-matter interactions. These unique optical properties of plasmonic NPs have been used to design chemical and biological sensors. Over the last few decades, colloidal plasmonic NPs have been greatly exploited in sensing applications through LSPR shifts (colorimetry), surface-enhanced Raman scattering, surface-enhanced fluorescence, and chiroptical activity. Although colloidal plasmonic NPs have emerged at the forefront of nanobiosensors, there are still several important challenges to be addressed for the realization of plasmonic NP-based sensor kits for routine use in daily life. In this comprehensive review, researchers of different disciplines (colloidal and analytical chemistry, biology, physics, and medicine) have joined together to summarize the past, present, and future of plasmonic NP-based sensors in terms of different sensing platforms, understanding of the sensing mechanisms, different chemical and biological analytes, and the expected future technologies. This review is expected to guide the researchers currently working in this field and inspire future generations of scientists to join this compelling research field and its branches.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

MXenes in healthcare, synthesis, fundamentals and applications

  • Babar, Zaheer Ud Din|||0000-0003-3293-6244
  • Iannotti, Vincenzo|||0000-0001-7229-5045
  • Rosati, Giulio|||0000-0002-0227-4561
  • Zaheer, Ayesha|||0009-0006-7667-6308
  • Velotta, Raffaele|||0000-0003-1077-8353
  • Della Ventura, Bartolomeo|||0000-0003-2920-6187
  • Álvarez Diduk, Ruslan|||0000-0002-9876-1574
  • Merkoçi, Arben|||0000-0003-2486-8085
Since their discovery over a decade ago, MXenes have transformed the field of "materials for healthcare", stimulating growing interest in their healthcare-related applications. These developments have also driven significant advancements in MXenes' synthesis. This review systematically examines the synthesis of MXenes and their applications in sensing and biomedical fields, underscoring their pivotal role in addressing critical challenges in modern healthcare. We describe the experimental synthesis of MXenes by combining appropriate laboratory modules with the mechanistic principles underlying each synthesis step. In addition, we provide extensive details on the experimental parameters, critical considerations, and essential instructions for successful laboratory synthesis. Various healthcare applications including sensing, biomedical imaging, synergistic therapies, regenerative medicine, and wearable devices have been explored. We further highlight the emerging trends of MXenes, viz., their role as nanovehicles for drug delivery, vectors for gene therapy, and tools for immune profiling. By identifying the important parameters that define the utility of MXenes in biomedical applications, this review outlines strategies to regulate their biomedical profile, thereby serving as a valuable guide to design MXenes with application-specific properties. The final section integrates experimental research with theoretical studies to provide a comprehensive understanding of the field. It examines the role of emerging technologies, such as artificial intelligence (AI) and machine learning (ML), in accelerating material discovery, structure-property optimization, and automation. Complemented by detailed supplementary information on synthesis, stability, biocompatibility, environmental impact, and theoretical insights, this review offers a profound knowledge base for understanding this diverse family of 2D materials. Finally, we compared the potential of MXenes with that of other 2D materials to underscore the existing challenges and prioritize interdisciplinary collaboration. By synthesizing key studies from its discovery to current trends (especially from 2018 onward), this review provides a cohesive assessment of MXene synthesis with theoretical foundations and their prospects in the healthcare sector.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Mechanistic Insights and Technical Challenges in Sulfur-Based Batteries, A Comprehensive In Situ/Operando Monitoring Toolbox

  • Yu, Jing|||0000-0002-7620-745X
  • Pinto-Huguet, Ivan
  • Zhang, Chao Yue
  • Zhou, Yingtang|||0000-0002-8678-295X
  • Xu, Yaolin|||0000-0002-2658-3852
  • Vizintin, Alen|||0000-0003-1876-1396
  • Velasco-Vélez, Juan-Jesús|||0000-0002-6595-0168
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Pan, Xiaobo|||0000-0002-5757-2339
  • Oney, Gozde
  • Olgo, Annabel
  • Märker, Katharina|||0000-0002-5056-7174
  • M. Da Silva, Leonardo
  • Luo, Yufeng
  • Lu, Yan|||0000-0003-3055-0073
  • Huang, Chen
  • Härk, Eneli|||0000-0001-5758-8106
  • Fleming, Joe
  • Chenevier, Pascale|||0000-0003-4358-2162
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Bai, Yunfei
  • Botifoll, Marc|||0000-0002-4876-6393
  • Black Serra, Ashley Phillip|||0000-0001-7929-5144
  • An, Qi
  • Amietszajew, Tazdin|||0000-0001-7452-1034
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Batteries based on sulfur cathodes offer a promising energy storage solution due to their potential for high performance, cost-effectiveness, and sustainability. However, commercial viability is challenged by issues such as polysulfide migration, volume changes, uneven phase nucleation, limited ion transport, and sluggish sulfur redox kinetics. Addressing these challenges requires insights into the structural, morphological, and chemical evolution of phases, the associated volume changes and internal stresses, and ion and polysulfide diffusion within the battery. Such insights can only be obtained through real-time reaction monitoring within the battery's operational environment, supported by molecular dynamics simulations and advanced artificial intelligence-driven data analysis. This review provides an overview of in situ/operando techniques for real-time tracking of these processes in sulfur-based batteries and explores the integration of simulations with experimental data to provide a holistic understanding of the critical challenges, enabling advancements in their development and commercial adoption.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Spin-modulated catalysis in sulfur cathodes for improved performance in lithium-sulfur batteries

  • Zhang, Chao Yue
  • Yu, Jing|||0000-0002-7620-745X
  • Huang, Chen
  • Cabello, Gema
  • Qi, Xuede|||0009-0008-5723-3629
  • Sun, Guo Wen
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • He, Ren|||0000-0003-3712-5539
  • Yang, Dawei|||0000-0002-3842-8286
  • Li, Canhuang
  • Li, Junshan|||0000-0002-1482-1972
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Rubio Garcia, Javier
  • Estrader i Bofarull, Marta|||0000-0003-3379-8234
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Zhou, Jin Yuan
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The rapid growth of electric vehicles and the increasing integration of renewable energy into the grid have heightened the demand for high-capacity energy storage systems based on abundant, low-cost materials. To address the limitations of conventional ion-intercalation batteries, conversion-type electrodes have gained significant attention, as their energy storage relies on chemical redox reactions often requiring activation or acceleration via electrocatalysis. Recent studies reveal that electrocatalytic activity is governed not only by active-site density and charge-carrier availability, but also by the spin states of electrons within the catalyst. Consequently, understanding the role of electronic spin states in battery performance, and how to manipulate them to enhance energy storage, has become a critical research frontier. This review provides a comprehensive overview of current strategies to modulate spin states in electrocatalysts for conversion-type cathodes. While external magnetic fields remain the primary method to probe and control electron spin, more practical and scalable approaches, such as atomic coordination engineering and surface spin filters, are emerging. Particular focus is given to sulfur cathodes, which offer exceptional theoretical energy density and capacity but depend heavily on catalytic hosts to enable efficient sulfur redox reactions. The review also surveys experimental techniques for probing spin states and theoretical approaches for modeling spin-related phenomena at the atomic scale. Finally, it highlights emerging research directions, underscoring the potential of spin-state modulation as a transformative strategy for next-generation energy storage technologies.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Overcoming challenges in plasmonic biosensors deployment for clinical and biomedical applications: A systematic review and meta-analysis

  • Ramirez-Priego, Patricia
  • Mauriz, Elba
  • Giarola, Juliana Fátima
  • Lechuga, Laura M.
Over recent decades, plasmonic biosensors have positioned themselves as one of the most powerful analytical tools for evaluating biomolecular interactions. This impactful analytical technology has demonstrated its value in diverse fields such as clinical diagnostics, biotechnology, pharmaceutical evaluation, disease prevention, among others. Moreover, technological advances have led to the development of miniaturized plasmonic biosensing platforms, which are small and portable for point-of-care (POC) applications. This review presents an overview of recently implemented POC-plasmonic biosensors and their use for clinical and biomedical analysis. A systematic and deep literature search in PubMed, Scopus, and Web of Science databases was performed in publications between 1 January 2018 and 30 November 2023. We excluded many publications due to the absence of real application in complex matrices or insufficient analytical information. The quality of each study was evaluated methodologically by QUADAS-2, and a meta-analysis was performed using the Cochrane RevMan software. From 1177 full-text assessments, 27 research articles were selected. The pooled sensitivity was 4.36 (95%, CI 0.19–5.97, I2 = 83%). The subgroup analysis according to the plasmonic sensors type revealed the best diagnostic odds ratio with the lowest heterogeneity: 3.81 (95% CI 0.39–39.08; I2 = 33%, p = 0.22). These findings indicate that despite plasmonic biosensors taking advantage of their miniaturization and showing promising results in portable POC devices, there are still significant obstacles to using them as routine diagnostic tools. Estimating test accuracy may help to reduce the gap between controlled laboratory conditions and real-world clinical decision-making environments., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021‐001214-S), The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021‐001214-S, funded by MCIU/AEI/10.13039.501100011033. The NanoB2A group is a consolidated research group (Grup de Recerca) of the Generalitat de Catalunya and has support from the Departament de Recerca i Universitats de la Generalitat de Catalunya (Expedient: 2021 SGR 00456)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Plasmonic biosensors: Towards fully operative detection platforms for biomedical application and its potential for the diagnosis of autoimmune diseases

  • Giarola, Juliana Fátima
  • Estévez, M. Carmen
  • Lechuga, Laura M.
In-vitro diagnostics (IVD) has become an in-demand area with a high-achievement transformation due to the expansion of new technologies. Technology has grown from time-consuming laboratory techniques to modern automated immunoassays and progressed with real-time sensing through the emergence of biosensor devices. Plasmonic biosensors are one of the most employed optical biosensors and stand out for their versatility and wide range of applications in diagnostic tests. One of the clinical diagnostics areas of growing interest is autoimmune diseases (AD), which have been increasingly prevalent worldwide. There is a rising demand for reliable and early AD diagnosis tools. This review highlights the main challenges for early AD diagnostics and the advanced plasmonic biosensors that have been exploited for AD biomarker detection, including brief descriptions of their analytical performance. Finally, the prospects and trends in this area are outlined, thinking about developing multiplexed platforms capable of addressing the multianalyte nature of one disease., We acknowledge the financial support received through the POINTED project (PDC2021-121325-I00) from the Ministry of Science and Innovation, and the Spanish Research Agency (MICIN/AEI/10.13039/501100011033) and the European Commission–NextGenerationEU/PRTR. We also acknowledge the financial support from European Commission – NextGenerationEU (Regulation EU 2020/2094), through CSIC's Global Health Platform (PTI Salud Global – Iniciativa Estratégica de Diagnóstico). ICN2 is funded by the CERCA programme/Generalitat de Catalunya). The ICN2 is supported by Severo Ochoa Centers of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. The NanoB2A group is a consolidated research group (Grup de Recerca) of the Generalitat de Catalunya and has support from the Departament de Recerca i Universitats de la Generalitat de Catalunya (expedient: 2021 SGR 00456)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanistic Insights and Technical Challenges in Sulfur-Based Batteries: A Comprehensive In Situ/Operando Monitoring Toolbox

  • Yu, Jing
  • Pinto, Iván
  • Zhang, Chao Yue
  • Zhou, Yingtang
  • Xu, Yaolin
  • Vizintin, Alen
  • Velasco-Vélez, Juan-Jesús
  • Qi, Xueqiang
  • Pan, Xiaobo
  • Oney, Gozde
  • Olgo, Annabel
  • Märker, Katharina
  • Silva, Leonardo M. da
  • Luo, Yufeng
  • Lu, Yan
  • Huang, Chen
  • Härk, Eneli
  • Fleming, Joe
  • Chenevier, Pascale
  • Cabot, Andreu
  • Bai, Yunfei
  • Botifoll, Marc
  • Black, Ashley P.
  • An, Qi
  • Amietszajew, Tazdin
  • Arbiol, Jordi
Batteries based on sulfur cathodes offer a promising energy storage solution due to their potential for high performance, cost-effectiveness, and sustainability. However, commercial viability is challenged by issues such as polysulfide migration, volume changes, uneven phase nucleation, limited ion transport, and sluggish sulfur redox kinetics. Addressing these challenges requires insights into the structural, morphological, and chemical evolution of phases, the associated volume changes and internal stresses, and ion and polysulfide diffusion within the battery. Such insights can only be obtained through real-time reaction monitoring within the battery's operational environment, supported by molecular dynamics simulations and advanced artificial intelligence-driven data analysis. This review provides an overview of in situ/operando techniques for real-time tracking of these processes in sulfur-based batteries and explores the integration of simulations with experimental data to provide a holistic understanding of the critical challenges, enabling advancements in their development and commercial adoption., ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. I.P.H. acknowledges funding from AGAUR-FI scholarship (2023FI-00268) Joan Oró of the Secretariat of Universities of the Generalitat of Catalonia and the European SocialPlus Fund. ICN2 is founding member of e-DREAM. J.Y. and C.H. thank the China Scholarship Council for the financial support. A.V. thanks financial support from the Slovenian Research and Innovation Agency (ARIS) under research core program P2-0423. J.Y. and A.C. acknowledge support from the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033, the Generalitat de Catalunya 2021SGR01581 and European Union NextGenerationEU/PRTR. P.C. acknowledges support from the 2BoSS project of the ERA-MIN3 program with the French grant number ANR-22-MIN3-0003-01 from Agence Nationale de la Recherche. C.Y.Z. acknowledge the support by the Supercomputing Center of Lanzhou University, China. We acknowledge financial support from the European Union (Grant agreement No. 101104006 ─ HEALING BAT ─ HORIZON-CL5-2022-D2-01)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Resilient intraparticle entanglement and its manifestation in spin dynamics of disordered Dirac materials

  • Martínez Romeral, Jorge
  • Cummings, Aron W.
  • Roche, Stephan
Topological quantum matter exhibits transport phenomena driven by entanglement between internal degrees of freedom, as, for instance, generated by spin-orbit coupling effects. Here we report on a direct connection between the mechanism driving spin relaxation and the intertwined dynamics between spin and sublattice degrees of freedom in disordered graphene. Beyond having a direct observable consequence, such intraparticle entanglement is shown to be resilient to disorder, pointing towards a unique resource for quantum information processing., ICN2 is funded by the CERCA program/Generalitat de Catalunya, and is supported by the Severo Ochoa Centres of Excellence program, Grant No. CEX2021-001214-S, funded by MCIN/AEI No. 10.13039.501100011033. This work is also supported by MICIN with European funds, NextGenerationEU (No. PRTR-C17.I1), and by Generalitat de Catalunya., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spintronics with two-dimensional materials and van der Waals heterostructures

  • Roche, Stephan
  • Wees, Bart J. van
  • Garello, Kevin
  • Valenzuela, Sergio O.
We briefly summarize more than fifteen years of intense research in 2D materials (2DM)-based spintronics, which has led to an in-depth understanding of fundamental spin transport mechanisms, novel functionalities in magnetic tunnel junctions and spin orbit torque devices, and the formidable and unprecedented capability of proximity effects to make graphene a spin active material. Although the portfolio of functional 2DM-based devices and related heterostructures is continuously increasing, we outline key technological challenges that are still impeding practical spintronic applications in spin-logics and non-volatile memory technologies. We conclude by mentioning current and future directions which will maintain the momentum of the field of ultracompact spintronics based on 2DM and van der Waals heterostructures., ICN2 is funded by the CERCA programme / Generalitat de Catalunya, and is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN / AEI / 10.13039.501100011033. This work is also supported by the Grants PCI2021-122035-2A, PID2022-143162OB-I00 funded by MCIN with European funds-NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. We acknowledge funding from the European Union's Horizon 2020 (EU H2020) research and innovation programme under Grant Agreement 881603 (Graphene Flagship), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

MXenes in healthcare: synthesis, fundamentals and applications

  • Babar, Zaheer Ud Din
  • Iannotti, Vincenzo
  • Rosati, Giulio
  • Zaheer, Ayesha
  • Velotta, Raffaele
  • Della Ventura, Bartolomeo
  • Álvarez-Diduk, Ruslan
  • Merkoçi, Arben
Since their discovery over a decade ago, MXenes have transformed the field of "materials for healthcare", stimulating growing interest in their healthcare-related applications. These developments have also driven significant advancements in MXenes' synthesis. This review systematically examines the synthesis of MXenes and their applications in sensing and biomedical fields, underscoring their pivotal role in addressing critical challenges in modern healthcare. We describe the experimental synthesis of MXenes by combining appropriate laboratory modules with the mechanistic principles underlying each synthesis step. In addition, we provide extensive details on the experimental parameters, critical considerations, and essential instructions for successful laboratory synthesis. Various healthcare applications including sensing, biomedical imaging, synergistic therapies, regenerative medicine, and wearable devices have been explored. We further highlight the emerging trends of MXenes, viz., their role as nanovehicles for drug delivery, vectors for gene therapy, and tools for immune profiling. By identifying the important parameters that define the utility of MXenes in biomedical applications, this review outlines strategies to regulate their biomedical profile, thereby serving as a valuable guide to design MXenes with application-specific properties. The final section integrates experimental research with theoretical studies to provide a comprehensive understanding of the field. It examines the role of emerging technologies, such as artificial intelligence (AI) and machine learning (ML), in accelerating material discovery, structure-property optimization, and automation. Complemented by detailed supplementary information on synthesis, stability, biocompatibility, environmental impact, and theoretical insights, this review offers a profound knowledge base for understanding this diverse family of 2D materials. Finally, we compared the potential of MXenes with that of other 2D materials to underscore the existing challenges and prioritize interdisciplinary collaboration. By synthesizing key studies from its discovery to current trends (especially from 2018 onward), this review provides a cohesive assessment of MXene synthesis with theoretical foundations and their prospects in the healthcare sector., Zaheer Ud din Babar acknowledges Scuola Superiore Meridional (SSM), University of Naples, Federico-II, Naples, Italy, for funding his stay as a visiting PhD scholar at the Catala Institute of Nanoscience and Nanotechnology (ICN2), Campus UAB, 08193 Bellaterra, Barcelona, Spain. The authors are thankful to all individuals and/or organizations who provided permission to republish/reproduced their figures and other relevant information. This project has received funding from the European Union’s Horizon Europe – the Framework Programme for Research and Innovation (2021–2027) under grant agreement No 101120706. The views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union. Neither the European Union nor the granting authority can be held responsible for them. The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIU/AEI/10.13039.501100011033. We acknowledge Departament de Recerca i Universitats of Generalitat de Catalunya for the grant 2021 SGR 01464. We also acknowledge grant PID2021-124795NB-I00 funded by MICIU/AEI/10.13039/ 501100011033 and by ‘‘ERDF/EU’’, With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polysaccharides: The Sustainable Foreground in Energy Storage Systems

  • Thomas, Sharin Maria
  • Gómez-Romero, P.
  • González-Gil, Rosa M.
Polysaccharides offer a perfect option as raw materials for the development of a new generation of sustainable batteries and supercapacitors. This is due to their abundance and inherent structural characteristics. Polysaccharides can be chemically functionalized and engineered, offering a wide range of possibilities as electrode materials (as precursors of porous nanocarbons), binders and separators. Their hierarchical morphology also enables their exploitation as aerogel and hydrogel structures for quasi-solid and solid polymer electrolytes with high conductivity and wide voltage stability windows. In this review, we discuss how different polysaccharides, such as lignocellulosic biomass, starch, chitosan, natural gums, sugars and marine polysaccharides, can be applied in different components of energy storage systems (ESSs). An overview of the recent research work adhering to each functionality of different polysaccharides in various storage systems is provided., This research was funded by Ministerio de Ciencia Innovacion y Universidades (MCIU), Agencia Estatal de Investigación (AEI) and the European Regional Development Fund (FEDER) (grants PID2021-128390OB-I00, TED2021-130205B-C21, and PLEC2022-009328). The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, grant CEX2021-001214-S, funded by MCIU/AEI/10.13039.501100011033. The ICN2 is also funded by the CERCA programme/Generalitat de Catalunya. This work has been carried out within the framework of the doctoral program (PhD) of Material Science (Department of Physics) of Universitat Autònoma de Barcelona (UAB) and supported by the grant PRE2021-097210 from the call Ayudas para contratos predoctorales para la formación de doctores/as 2021 from the Agencia Estatal de Investigación, with the support of the Severo Ochoa Centres of Excellente programme, grant CEX2021-001214-S funded by MCIU/AEI/10.13039/501100011033 and FSE+., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Quantum dots for biosensing: Classification and applications

  • Quesada-González, Daniel
  • Merkoçi, Arben
Quantum dots (QDs) are the smallest nanomaterials (2-10 nm), with unique optical and electronic properties. Thanks to these properties, QDs have been standing during the last years as signal tags for different applications, including bioimaging, fluorescent biosensors and electrochemical assays. In this review, we explore the current state-of-the art on these nanomaterials, differentiating them between semiconductor and carbon-based QDs. Also, the review focuses on their unique advantages as transducers in different biosensing platforms., The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. This publication is part of the Grant PID2021-124795NB-I00 funded by MICIU/AEI/10.13039/501100011033 and by “ERDF/EU”. We also acknowledge Departament de Recerca i Universitats of Generalitat de Catalunya for the grant 2021 SGR 01464. The authors thank Dámaso Torres Navarro, graphic designer at ICN2, for drawing F ig. 1 and graphical abstract. Daniel Quesada-González also wants to thank his wife Leyla Karadurmuş for all her support and love, and also Haku, for trying not to walk on the keyboard or bite the screen (so often) while Daniel was working on this review (Haku is a cat)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrode-Electrolyte Engineering and In Situ Spectroscopy for Urea Electrosynthesis from Carbon Dioxide and Nitrate Co-Reduction

  • Costa, Gabriel F.
  • Escudero-Escribano, María
The biogeochemical cycles of carbon and nitrogen are globally disturbed due to the intensive use of fossil fuels and fertilizers, which is reflected by the accumulation of carbon dioxide in the atmosphere and nitrate in water streams. The co-electroreduction of carbon dioxide and nitrate is a promising low-carbon alternative for urea synthesis that would help to reestablish both carbon and nitrogen cycles. This Perspective highlights the importance of rational catalyst and electrolyte engineering to enable electrochemical urea synthesis. Although the field has gained significant attention over the past few years, fundamental research under well-defined conditions remains underexplored. We highlight the importance of investigating structure-sensitivity and electrolyte effects on electrochemical C-N coupling through complementary in situ spectroscopy and online techniques. Model studies, including in situ surface-sensitive investigations, will be crucial to understand the molecular mechanisms and thus to rationally design more efficient systems for urea electrosynthesis, paving the way for their scalable and industrial applications., This work has received funding from the European Union’s Horizon Europe research and innovation programme under grant agreement No. 101115204 (ICONIC project). The ICN2 is funded by the CERCA programme/Generalitat de Catalunya and is also supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIU/AEI/10.13039.501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stability and reliability of perovskite photovoltaics: Are we there yet?

  • Tabah, Kenedy
  • Tian, Zhenchuan
  • Raga, Sonia R.
  • Xie, Haibing
  • Katz, Eugene A.
  • Lira-Cantú, Mónica
The power-conversion efficiency (PCE) of perovskite solar cells (PSCs) has exceeded in 2024 the theoretical single-junction Shockley-Queisser limit of 33.7% with the perovskite/silicon tandem version. The commercialization of the technology is now a reality with the PV industry demonstrating its first commercial products. Many companies have shown excellent module reliability with most of them passing the IEC standardization (required for commercial silicon solar cells). In this article, we want to bring some light on the most intriguing question regarding the stability and reliability of PSC technology: Are we there yet? Issues on stability are still under strong investigation and research on the topic has increased exponentially in the last 10 years. Since some companies have already promised excellent reliability of their modules, with 80% retention of the initial PCE after 25 years, the following  two or three years will be crucial to demonstrate these pledges. In this work, we present an outline of the most stable PSC devices reported to date and discuss the most important strategies leading to highly stable devices., The authors give thanks to the Spanish State Research Agency for the grant PerMXSol (PID2022-143344OB-I00). The authors acknowledge the ORgEnergy Excellence Network (CTQ2016-81911-REDT), to the Agencia de Gestió d'Ajuts Universitaris i de Recerca (AGAUR) for the support to the consolidated Catalonia research group 2021 SGR 01617 and the Xarxa d'R+D+I Energy for Society (XRE4S). Part of this work was under Materials Science PhD degree for K.T.T. and Z.T. of the Universitat Autònoma de Barcelona (UAB, Spain). ICN2 was supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and was funded by the CERCA Programme/Generalitat de Catalunya. The ICN2 was supported by the Severo Ochoa Centres of Excellence Programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. The authors thank the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant No. SEV-2017-0706 for the postdoctoral contract, and the PhD scholarship PRE2022-000291 granted to Z.T. E.A.K. acknowledges financial support from the European Union through the TESTARE Project (Grant ID: 101079488)., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. E.A.K. acknowledges financial support from the European Union through the TESTARE Project (Grant ID: 101079488). M.L-C. gives thanks to the Spanish State Research Agency for the Grant PerMXSol (PID2022-143344OB-I00)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphene Derivatives as Efficient Transducing Materials for Covalent Immobilization of Biocomponents in Electrochemical Biosensors

  • Jakubec, Petr
  • Panáček, David
  • Nalepa, Martin Alex
  • Rossetti, Marianna
  • Álvarez-Diduk, Ruslan
  • Merkoçi, Arben
  • Vasjari, Majlinda
  • Kulla, Lueda
  • Otyepka, Michal
This review highlights the role of graphene derivatives in advancing electrochemical biosensors for applications in diagnostics, environmental monitoring, and industrial sensing. Graphene derivatives, including graphene oxide (GO), reduced GO, and wide range of graphenes prepared via fluorographene chemistry, represent a prominent class of transducing materials in electrochemical biosensor development. Their ability to support covalent immobilization of biocomponents ensures stability, specificity, and long-term performance, addressing limitations of noncovalent methods. Advances in fabrication, such as laser-assisted reduction, enable scalable and cost-effective production of conductive graphene-based electrodes. Covalent functionalization techniques, like carbodiimide coupling and click chemistry, facilitate integration with bioreceptors, leading to highly selective biosensors. Emerging approaches, including inkjet printing of graphene-based inks onto eco-friendly substrates, promise sustainable and portable diagnostic devices. These advances support biosensors aligned with modern and sustainable technologies. Future efforts must focus on scalable production, improved multiplexing, and environmental sustainability to fully harness the potential of graphene derivatives in electrochemical biosensors., This work was supported by the ERDF/ESF project TECHSCALE (grant no. CZ.02.01.01/00/22_008/0004587) and ERDF/ESF project “Interdisciplinary Approaches to the Prevention and Diagnosis of Viral Diseases” (grant no. CZ.02.01.01/00/23_021/0008856). The authors also acknowledge financial support from the European Union through the REFRESH project—Research Excellence for Region Sustainability and High-tech Industries (grant no. CZ.10.03.01/00/22_003/0000048), funded via the Operational Programme Just Transition. Additional funding was provided by the European Union's Horizon Europe research and innovation programme (project GRADERINK no. 101137959). This work has received also funding from the European Union's Horizon Europe research and innovation program (SUSNANO) under grant agreement no. 101059266 and from the European Union's Horizon Europe – the Framework Programme for Research and Innovation (2021–2027) under grant agreement No 101120706 (2D-BioPAD). The views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union. Neither the European Union nor the granting authority can be held responsible for them. The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIU/AEI/10.13039.501100011033. We acknowledge Departament de Recerca i Universitats of Generalitat de Catalunya for the grant 2021 SGR 01464. We also acknowledge grant PID2021-124795NB-I00 funded by MICIU/AEI/10.13039/501100011033 and by “ERDF/EU”., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The rise of single-atom catalysts in hematite photoanodes for photoelectrochemical water splitting

  • Tang, Peng-Yi
  • Arbiol, Jordi
The urgent imperative to achieve “carbon peak and carbon neutrality” has spurred a surge of researchers to vigorously advance the development of renewable energy technologies. Under the circumstances, there is a burgeoning interest in developing diverse solar energy utilization methods. Photoelectrochemical (PEC) water splitting, a process that harnesses sunlight, semiconductor materials, and water to transform solar energy into hydrogen energy, has emerged as a promising, environmentally friendly, and cost-effective solution., This work was supported by the Hundred Talents Program (B) of the Chinese Academy of Sciences (E2XBRD1001). ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials program and was supported by MCIN with funding from European Union Next Generation EU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors are thankful for support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/, and “ERDF A way of making Europe,” funded by the European Union. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (grant no. CEX2021-001214-S) and funded by the CERCA Programme/Generalitat de Catalunya. ICN2 is founding member of e-DREAM. The authors thank Dr. X.Y. Jiang (2020 X-Lab, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences) for discussions., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In Situ Elucidation of Reaction Mechanisms in Electrocatalysis Using Scanning Electrochemical Microscopy

  • Barroso, Jaxiry S.
  • Escudero-Escribano, María
Understanding local surface reactivity in the mechanism of electrocatalytic reactions has become particularly important for designing efficient electrocatalytic systems for renewable energy conversion. The dynamic formation of species near the electrode surface compared to the bulk may lead to the formation of key intermediates, making understanding reaction mechanisms challenging. In this review, we highlight the capabilities of scanning electrochemical microscopy (SECM) as an interfacial characterisation tool for the in situ analysis of electrocatalytic reactions. First, we introduced the basic concepts of SECM. Then we discussed how SECM characterisation leads to a deeper understanding of the local reactivity in electrochemical reactions, including carbon, oxygen, and short-lived intermediates electrocatalysis. We highlight emerging applications of SECM, such as high-resolution spatial mapping of nanoscale electrocatalytic activity, high-throughput screening, and its combination with spectroscopic techniques. We illustrate how SECM investigations are key in electrocatalysis, offering powerful capabilities for in situ analysis, local activity mapping, and coupling with complementary methods to uncover mechanistic pathways., We acknowledge Grant Ref. PID2023-151780OB-I00 funded by the Spanish Ministry of Science, Innovation and Universities MICIU/AEI/10.13039/501100011033 and the European Regional Development Fund (FEDER) from the European Union for funding this work. ICN2 is funded by the CERCA programme/Generalitat de Catalunya and is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIU/AEI/10.13039.501100011033. Jaxiry S. Barroso-Martínez acknowledges the support of the predoctoral program AGAUR-FI ajuts (2023 FI-3 00065) Joan Oró funded by the Secretariat of Universities and Research of the Department of Research and Universities of the Generalitat of Catalonia and the European Social Plus Fund. Jaxiry S. Barroso-Martínez acknowledges that this work has been done within the framework of the PhD programme in ‘Electrochemistry Science and Technology’ at the Autonomous University of Barcelona. We gratefully acknowledge Dámaso Torres Navarro for the preparation of the graphical abstract., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Orbitronics in Two-dimensional Materials

  • Cysne, Tarik P.
  • Canonico, Luis M.
  • Costa, Marcio
  • Muniz, R. B.
  • Rappoport, Tatiana G.
19 pages, 4 figures, 1 table, Orbitronics explores the control and manipulation of electronic orbital angular momentum in solid-state systems, opening new pathways for information processing and storage. One significant advantage of orbitronics over spintronics is that it does not rely on spin-orbit coupling, thereby broadening the range of non-magnetic materials that can be utilized for these applications. It also introduces new topological features related to electronic orbital angular momentum, and clarifies some long-standing challenges in understanding experiments that rely on the conventional concept of valley transport. This review highlights recent advances in orbitronics, particularly in relation to two-dimensional materials. We examine the fundamental principles underlying the generation, transport, and dynamics of orbital angular momentum to illustrate how the unique properties of two-dimensional materials can promote orbitronic phenomena. We also outline potential future research directions and address some outstanding questions in this field., The authors thank the Brazilian funding agencies CNPq, CAPES, and FAPERJ for their financial support. TGR acknowledges financial support from FAPERJ, grant numbers E-26/200.959/2022 and E-26/210.100/2023, FCT - Fundação para a Ciência e Tecnologia, project reference numbers UIDB/04650/2020, 2022.06797.PTDC and 2022.07471.CEECIND/CP1718/CT0001 (with https://doi.org/10.54499/2022.07471.CEECIND/CP1718/CT0001) and 2023.11755.PEX (with https://doi.org/10.54499/2023.11755.PEX). M.C. acknowledges CNPq (Grant No. 317320/2021-1), FAPERJ/Brazil (Grant No. E26/200.240/2023) and INCT Materials Informatics for financial support. L.M.C. acknowledges Severo Ochoa Centres of Excellence programme, CEX2021-001214-S and CERCA Programme/Generalitat de Catalunya. R. B. M acknowledges financial support from INCT of Spintronics and Advanced Magnetic Nanostructures. TPC acknowledges CNPq (Grant No. 305647/2024-5)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Progress on quantum transport engineering in atomically precise anisotropic nanoporous graphene

  • Alcón, Isaac
  • Cummings, Aron W.
  • Ribas, Esteve
  • Roche, Stephan
  • Mugarza, Aitor
Bottom-up on-surface synthesis has demonstrated an impressive capability to realize desired carbon nanomaterials with atomic precision, also referred to as carbon nanoarchitectures. By using chemically tailored organic building blocks, it is possible to obtain virtually any carbon nanoarchitecture, with equally tunable electronic and magnetic properties. Among all known carbon nanoarchitectures, graphene nanoribbons (GNRs) have become the most extensively studied for nanoelectronics, due to their conductive π-conjugated structure and semiconducting nature. In this review, we summarize the progress made on a particular type of nanoporous graphenes (NPGs), conceived as 2D arrays of laterally bonded GNRs. Due to their relative novelty, these GNR-based NPGs have not yet acquired the same global attention as their predecessors (GNRs). However, recent progress suggests that these nanomaterials may play a central role in future carbon nanoelectronics and spintronics. This is due in large part to the ability to fine tune, both by chemical design and by external means, the electronic coupling between neighbouring GNRs within the NPG, thereby enabling precise control over the anisotropic properties of these materials, as demonstrated by various theoretical studies. In this review, we summarize the different approaches that have been proposed to tune such inter-ribbon coupling and, thus, the anisotropy. Overall, these studies underscore the unique platform that GNR-based NPGs provide for tailoring quantum electronic properties and two-dimensional anisotropy. As the field progresses, this capability could be harnessed for targeted applications at the molecular scale or even the atomic scale., IQTC is supported by the María de Maeztu program for Spanish Structures of Excellence (CEX2021-001202-M). ICN2 is funded by the CERCA Programme/Generalitat de Catalunya and supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039/501100011033. The authors acknowledge funding from Grant No. TED2021-132388B-C41 funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR, and Grant No. PID2022-140845OB-C63 funded by MICIU/AEI/10.13039/501100011033 and by FEDER, the European Union (EU)., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2021-001202-M), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spin-modulated catalysis in sulfur cathodes for improved performance in lithium–sulfur batteries

  • Zhang, Chao Yue
  • Yu, Jing
  • Huang, Chen
  • Cabello, Gema
  • Qi, Xuede
  • Sun, Guo Wen
  • Zhang, Chaoqi
  • He, Ren
  • Yang, Dawei
  • Li, Canhuang
  • Li, Junshan
  • Qi, Xueqiang
  • Rubio García, Javier
  • Estrader, Marta
  • Arbiol, Jordi
  • Zhou, Jin Yuan
  • Cabot, Andreu
The rapid growth of electric vehicles and the increasing integration of renewable energy into the grid have heightened the demand for high-capacity energy storage systems based on abundant, low-cost materials. To address the limitations of conventional ion-intercalation batteries, conversion-type electrodes have gained significant attention, as their energy storage relies on chemical redox reactions often requiring activation or acceleration via electrocatalysis. Recent studies reveal that electrocatalytic activity is governed not only by active-site density and charge-carrier availability, but also by the spin states of electrons within the catalyst. Consequently, understanding the role of electronic spin states in battery performance, and how to manipulate them to enhance energy storage, has become a critical research frontier. This review provides a comprehensive overview of current strategies to modulate spin states in electrocatalysts for conversion-type cathodes. While external magnetic fields remain the primary method to probe and control electron spin, more practical and scalable approaches, such as atomic coordination engineering and surface spin filters, are emerging. Particular focus is given to sulfur cathodes, which offer exceptional theoretical energy density and capacity but depend heavily on catalytic hosts to enable efficient sulfur redox reactions. The review also surveys experimental techniques for probing spin states and theoretical approaches for modeling spin-related phenomena at the atomic scale. Finally, it highlights emerging research directions, underscoring the potential of spin-state modulation as a transformative strategy for next-generation energy storage technologies., This work was financially supported by the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22). The authors acknowledge support from the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033 and from Generalitat de Catalunya 2021 SGR 01581 and European Union NextGenerationEU/PRTR. J. Yu, C. Huang, C. Li, and Y. Ren thank the China Scholarship Council for the scholarship support. G. W. Sun thanks the Fundamental Research Funds for the Central Universities (lzujbky-2023-it36), and the Outstanding Graduate “Innovation Star” Project of Gansu Provincial Education Department, China (No.2023CXZX-058). J. S. Li acknowledges financial support from the Natural Science Foundation of Sichuan province (2022NSFSC1229). The authors also greatly acknowledge the support from the Supercomputing Center of Lanzhou University, China. D.W.Y. acknowledges support from the National Natural Science Foundation of China (NSFC) (Grants No. 22305064). M.E. acknowledges support from ‘Departament de Recerca i Universitats: del Departament d'Acció Climàtica, Alimentació i Agenda Rural i Fons Climàtic de la Generalitat de Catalunya’ with the grant 2023CLIMA00022. The Catalan Institute of Nanoscience and Nanotechnology (ICN2) acknowledges funding from Generalitat de Catalunya 2021SGR00457. Authors acknowledge the Advanced Materials programme (Project In-CAEM) by the Spanish Government with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. The authors are grateful for support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. ICN2 is founding member of e-DREAM, With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Challenges and strategies for first-principles simulations of two-dimensional magnetic phenomena

  • Garrido Aldea, Jaime
  • Esteras, Dorye L.
  • Roche, Stephan
  • Garcia, Jose H.
The discovery of intrinsic magnetism in two-dimensional (2D) materials has opened new frontiers in material science and technology. This review offers a detailed guide to modeling 2D magnetic materials using Density Functional Theory (DFT), focusing on both fundamental concepts and practical methodologies. Starting with the principles of magnetism, it examines the unique challenges of 2D systems, including the effects of anisotropy in stabilizing magnetic order, the limitations imposed by the Mermin-Wagner theorem, and the critical role of exchange interactions. The review introduces DFT basics, highlighting approaches to address electron delocalization through methods like DFT+U and hybrid functionals, and emphasizes the importance of incorporating van der Waals corrections for layered systems. Strategies for determining ground-state spin configurations for both collinear and non-collinear arrangements, are discussed, alongside advanced techniques like spin-constrained DFT and the Generalized Bloch Theorem for spin-spiral states. Methods for extracting magnetic exchange parameters and estimating critical temperatures from first-principles calculations are comprehensively covered. Practical insights are provided for applying these techniques to explore material databases and identify 2D magnets with promising properties for room-temperature applications. This review serves as a resource for theoretical and computational studies of 2D magnetic materials., Jaime Garrido Aldea acknowledges financial support from MICIU grant no. PRE2022-103460, funded by CEX2021-001214-S-20-8/MCIU/AEI/10.13039/501100011033 and by FSE+. DLE acknowledges financial support from MICIU and the European Union for the next-generation grant PRTR-C17.I1. All authors acknowledge support from PID2019-106684GB-I00 also funded by MCIN/AEI/10.13039/501100011033/FEDER, UE, as well as PID2022-138283NB-I00 funded by MCIU/AEI/10.13039/501100011033 and SGR and DLE funded by Generalitat de Catalunya. ICN2 is funded by the CERCA Programme from Generalitat de Catalunya, and is currently supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, both funded by MCIN/AEI/10.13039.501100011033. This work has received funding from the European Union's Horizon Europe research and innovation programme – European Research Council Executive Agency under grant agreement no. 101078370 – AI4SPIN. Disclaimer: Funded by the European Union. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Research Council Executive Agency. Neither the European Union nor the granting authority can be held responsible for them., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Future interconnect materials for highly integrated semiconductor devices

  • Kim, Hyeongjoon
  • Oh, Sehun
  • An, Sihyeon
  • Kim, Jaewon
  • Kim, Taehoon
  • Jeong, Seohyun
  • Kaya, Onurcan
  • Galvani, Thomas
  • Roche, Stephan
  • Cha, Judy J.
  • Chhowalla, Manish
  • Shin, Hyeon Suk
  • Shin, Hyeon-Jin
H.-J.S. acknowledges support from the National Research Foundation of Korea (NRF) grant funded by the Korean Government Ministry of Science and ICT (MSIT) (grant no. RS-2024-00352458), the GIST research fund (Future-leading Specialized Research Project, 2025) and the InnoCORE programme of the MSIT (GIST InnoCORE KH0830). H.S.S acknowledges support from the Institute for Basic Science (IBS-R036-D1), Republic of Korea. M.C. acknowledges support from the European Research Council (ERC) Advanced Grant (grant agreement GA 101019828-2D-LOTTO) and EPSRC (EP/ T026200/1, EP/T001038/1). J.J.C. acknowledges support from the US National Science Foundation Division of Materials Research (FUSE 2328907). O.K. acknowledges REDI Program funding and a Marie Skłodowska-Curie Grant (no. 101034328). S.R. acknowledges 2021 SGR 00997, CERCA Programme of the Generalitat de Catalunya, Severo Ochoa Centres of Excellence Programme (grant no. CEX2021-001214-S) and MCIN/AEI/10.13039.501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Redox Properties of Polyphenols and Their Role in ROS Generation for Biomedical Applications

  • Bolaños-Cardet, Jose
  • Pepió, Belén
  • Saiz-Poseu, Javier
  • López-Moral, Alba
  • Ullah, Faiz
  • Yuste, Víctor J.
  • Ruiz Molina, Daniel
  • Suárez-García, Salvio
Polyphenols, particularly catechols, represent a significant class of compounds characterized by their versatile physicochemical and biological properties, sourced from both natural origins and industrial by-products. This review highlights their critical redox properties, which enable both antioxidant activity and controlled reactive oxygen species (ROS) generation. These dual capacities underpin their diverse biomedical applications, including the development of materials like nanoparticles, hydrogels, bioadhesives, coatings, and membranes. The review explores their utility in areas such as antimicrobial strategies, advanced cancer therapy, and tissue regeneration, demonstrating how their ROS modulation drives therapeutic effects. Despite promising preclinical studies, significant challenges persist in clinical translation, encompassing pharmacokinetics, biosafety, regulatory pathways, and manufacturing consistency. Future perspectives emphasize the crucial need for deeper understanding and precise control of ROS dynamics, advanced delivery systems, rational material design, and the integration of artificial intelligence (AI) to accelerate research and clinical validation. This comprehensive review synthesizes the current state, challenges, and future directions for polyphenol-based biomedical materials., This work was supported by grants PID2024-161159OB-I00 and PID2024-161565OB-C21 funded by MICIU/AEI/10.13039/501100011033/ and by ERDF/EU. The ICN2 is funded by the CERCA program/Generalitat de Catalunya and supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MICIU/AEI/10.13039.50110001103. The authors acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanomaterial-Based Inkjet Printing for Electrochemical Sensing

  • Panáček, David
  • Urban, Massimo
  • Silvestri, Alessandro
  • Dědek, Ivan
  • Nalepa, Martin Alex
  • Merkoçi, Arben
  • Prato, Maurizio
  • Otyepka, Michal
Inkjet printing (IJP) has emerged as a transformative technology for printed and flexible electronics, redefining electrode engineering for (bio)chemical sensing. It enables maskless, picoliter-scale, additive deposition with high spatial precision, uniformity, and material efficiency. We provide a comprehensive overview of IJP as both a fabrication and post-fabrication functionalization platform for electrochemical working electrodes and fully printed devices. We integrate advances in ink formulation, jetting behavior, and substrate interactions with performance metrics such as layer thickness, roughness, electrochemical surface area, sensitivity, detection limit, and reproducibility. Comparative analyses with drop-casting and screen-printing highlight IJP's advantages in reproducibility, scalability, and material economy. Particular emphasis is placed on nanomaterial- and bioink-based systems, including carbon nanomaterials, MXenes, and hybrid inks, where controlled deposition governs electrode functionality. We also discuss emerging opportunities in hybrid architectures, reactive printing, and sustainable approaches using biodegradable substrates and water-based inks. Finally, we outline a roadmap toward automated, digitally controlled, and environmentally responsible manufacturing of customizable sensors for wearable, biomedical, food, and environmental applications. Collectively, these developments position inkjet printing as an enabling framework for the next generation of intelligent, reproducible, and sustainable sensing technologies., The work was supported by ERDF/ESF project TECHSCALE (No. CZ.02.01.01/00/22_008/0004587) and ERDF/ESF project “Interdisciplinary Approaches to the Prevention and Diagnosis of Viral Diseases” (CZ.02.01.01/00/23_021/0008856). M.O. and D.P. also acknowledge financial support of the European Union under the REFRESH—Research Excellence For Region Sustainability and High-tech Industries project number CZ.10.03.01/00/22_003/0000048 via the Operational Programme Just Transition. M.P. is the AXA Chair for Bionanotechnology (2016−2026). A.S. acknowledges the financial support of Ca’ Foscari University of Venice. The ICN2 is funded by the CERCA programme / Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIU/AEI/10.13039.501100011033. This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 101008701. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union. The European Union cannot be held responsible for them., Open access publishing facilitated by Vysoka skola banska-Technicka univerzita Ostrava, as part of the Wiley - CzechELib agreement., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Printing technologies for monitoring crop health

  • Panáček, David
  • Kupka, Vojtěch
  • Nalepa, Martin Alex
  • Dědek, Ivan
  • Álvarez-Diduk, Ruslan
  • Olenik, Selin
  • Flauzino, José M. R.
  • Zdražil, Jan
  • Jakubec, Petr
  • Zdražil, Lukáš
  • Spíchal, Lukáš
  • Sonigara, Keval K.
  • Zboril, Radek
  • Pumera, Martin
  • Merkoçi, Arben
  • Wang, Joseph
  • De Diego, Nuria
  • Güder, Firat
  • Otyepka, Michal
Agricultural production requires low-cost sensors capable of delivering reliable, high-resolution data across large areas. Rising food demand, limited arable land, and severe soil degradation have accelerated the adoption of precision agriculture, which relies on real-time monitoring of soil, plant, and environmental conditions. Central to this shift is the development of scalable sensor technologies enabled by advances in materials science. Printing techniques, including inkjet, screen, aerosol jet, 3D printing, and direct laser writing, offer versatile routes to fabricate flexible, large-area, and plant-integrated sensors. This Review surveys recent progress in printable low-dimensional materials for agricultural sensing, examines their physicochemical properties in relation to sensor performance, and discusses key challenges and future opportunities requiring interdisciplinary integration., The work was supported from the ERDF/ESF project TECHSCALE (no. CZ.02.01.01/00/22_008/0004587) and the ERDF/ESF project “Interdisciplinary Approaches to the Prevention and Diagnosis of Viral Diseases” (CZ.02.01.01/00/23_021/0008856). M.O. and R.Z. also acknowledge financial support of the European Union under the REFRESH-Research Excellence For Region Sustainability and High-tech Industries project number CZ.10.03.01/00/22_003/0000048 via the Operational Programme Just Transition. This work was supported by the project Interdisciplinary approaches for the development and application of new materials in industrial, agricultural and medical practice, reg. no. CZ.02.01.01/00/23_021/0008909 of the ERDF Programme Johannes Amos Comenius. This work has received funding from the European Union’s Horizon Europe research and innovation program (SUSNANO) under grant agreement no. 101059266. The views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union. Neither the European Union nor the granting authority can be held responsible for them. The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIU/AEI/10.13039.501100011033. F.G. and J.F. thank the Bill and Melinda Gates Foundation (Grand Challenges Explorations scheme under grant numbers OPP1212574 and INV-038695) for supporting this work. F.G. and S.O. acknowledge the support of the Bezos Earth Fund through the Bezos Centre for Sustainable Protein (BCSP/IC/001)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tandem Takeoff: Powering Tomorrow with Industrial-Grade Perovskite/Silicon Solar Cells

  • Vasilopoulou, Maria
  • Huang, Di
  • Gong, Jue
  • Li, Faming
  • Zhang, Hao
  • Sun, Yinqing
  • Mao, Lin
  • Polydorou, Ermioni
  • Aviziotis, Ioannis G.
  • Palilis, Leonidas C.
  • Kaya, Onurcan
  • Roche, Stephan
  • Arbiol, Jordi
  • Davazoglou, Dimitrios
  • Kymakis, E.
  • Liu, Lei
  • Sun, Kuan
  • Yusoff, Abd Rashid bin Mohd
  • Liu, Mingzhen
  • Nazeeruddin, Mohammad Khaja
Surpassing the Shockley-Queisser (S-Q) limit to realize photovoltaic efficiencies that significantly exceed those of traditional silicon solar cells (SSCs) remains a fundamental aspiration within the solar energy research community. The advent of multi-junction tandem cells presents a highly promising strategy to achieve this ambitious goal. Owing to their adjustable bandgaps and exceptional power conversion efficiencies (PCEs), perovskite solar cells (PSCs) have emerged as leading candidates for the top cell position in tandem device architectures, thereby advancing the frontier of next-generation photovoltaic technologies. Recent advancements have propelled the certified PCE of two-terminal monolithic perovskite/silicon tandem solar cells (PSTs) to 34.85% as of 2025, significantly surpassing the 27.81% efficiency of single-junction crystalline silicon cells and the 27.3% achieved by standalone PSCs. This review synthesizes recent progress in the design and optimization of perovskite top cells, emphasizing strategies that enable highly efficient and stable monolithic PSTs. Particular attention is given to fabrication techniques that ensure robust integration of perovskite and charge transport layers onto the silicon substrate, whether the silicon surface is polished or textured. The review also examines state-of-the-art approaches for modifying the bulk, surface, and interfaces of functional layers, as well as electrode engineering, all aimed at optimizing carrier transport and reducing recombination losses. Finally, the persistent challenges facing the field are discussed and perspectives and design guidelines are offered to propel future research directions, with the ultimate goal of advancing perovskite/silicon tandem technology toward widespread industrial adoption., A.R.B.M.Y. would like to thank UTM for financial support, Reference No: PY/2025/00533; Cost Center: Q.J130000.5354.00L92. A.R.B.M.Y. and M.K.N. would also like to thank UTM for financial support, Reference No: PG/2025/00074; Cost Center: R.J130000.7754.4J798. ICN2 acknowledged funding from Generalitat de Catalunya 2021SGR00457. ICN2 was supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and was funded by the CERCA Programme / Generalitat de Catalunya. O.K. was supported by the REDI Program, a project that has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 101034328. This paper reflects only the author's view, and the Research Executive Agency was not responsible for any use that may be made of the information it contains. This work was supported by the National Key R&D Program of China (2022YFB4200301), Fundamental Research Funds for the Central Universities (ZYGX2022YGRH010), the National Natural Science Foundation of China (52202216, 62274026), Department of Science and Technology of Sichuan Province (2023NSFSC0962, 2022NSFSC1958), and Sichuan Province Special Funding for Postdoctoral Research Projects., Open access publishing facilitated by Ecole polytechnique federale de Lausanne, as part of the Wiley - Ecole polytechnique federale de Lausanne agreement via the Consortium Of Swiss Academic Libraries., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Iron oxide nanoparticles (Fe3O4, γ-Fe2O3 and FeO) as photothermal heat mediators in the first, second and third biological windows

  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • López-Barbera, José Francisco|||0000-0002-9475-625X
  • Lafuente, Aritz|||0000-0002-1497-5744
  • Özel, Fatmahan
  • Fantechi, Elvira|||0000-0002-9323-2198
  • Muro Cruces, Javier
  • Hémadi, M.
  • Sepúlveda, Borja|||0000-0002-1562-7602
  • Nogués, Josep|||0000-0003-4616-1371
Nanotherapies are gaining increased interest for the treatment diverse diseases, particularly cancer, since they target the affected area directly, presenting higher efficacy and reduced side effects than traditional therapies. A promising nanotherapy approach is hyperthermia, where the nanoparticle can induce a local temperature increase by an external stimulus in the sick tissue to selectively kill the malignant cells. Among the diverse hyperthermia methods, photothermia is based on the absorption of light by the nanoparticles and further conversion into heat. Within the very wide range of nanostructured photothermal agents, iron oxides offer remarkable features since they are already approved by the FDA/EMA for various biomedical applications, they are biodegradable, easily manipulated using magnetic fields and can be imaged by diverse techniques. Here, we summarize the advantages of using the second biological window, both from the perspective of the skin and the optical properties of iron oxides. Further, we review the photothermal performance of iron oxide nanoparticles in the first, second and third biological windows. Overall, the results show that, for different types of iron oxide nanoparticles (FeO, γ-FeO, wüstite-FeO), both the heating capacity (i.e., induced temperature increase) and the photothermal conversion efficiency, η, vary in a complex way with the light wavelength, depending critically on the measurement conditions and physiochemical properties of the materials. Despite the spread in the reported photothermal properties of iron oxides, FeO particles tend to perform better than their γ-FeO counterparts, particularly in the second biological window. Interestingly, FeO, which has not been exploited so far from a photothermal perspective, shows very appealing absorption properties. Our preliminary studies using FeO/FeO core/shell nanoparticles evidence that they have excellent photothermal properties, outperforming FeO in both first and second biological windows. Finally, some applications beyond cancer treatment of iron oxide nanoparticles, exploiting the enhanced properties in the second spectral window, are discussed.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Direct writing of graphene electrodes for point-of-care electrochemical sensing applications

  • Zhao, Lei|||0000-0003-0291-2655
  • Piper, Andrew|||0000-0002-1208-8009
  • Rosati, Giulio|||0000-0002-0227-4561
  • Merkoçi, Arben|||0000-0003-2486-8085
Electrochemical sensors are increasingly garnering attention as valuable tools for point-of-care (POC) testing due to their low costs, high sensitivities, and ease of miniaturization. Graphene-based materials, renowned for their tunable electrical conductivity, high specific surface areas, versatile functionality, and biocompatibility; are highly suited for the fabrication of electrochemical sensors with heightened sensitivities. Non-contact, maskless, direct writing methods allow the rapid, large-scale production of graphene electrodes with high design flexibility. Researchers globally are advancing graphene electrode production, aiming for smaller, faster, and more efficient sensors. This review provides a comprehensive overview of recent advances on the direct writing of graphene electrodes for electrochemical sensing applications. It covers the basics of direct writing techniques, the advancements in graphene ink/precursor preparation, structural design, and device integration, with a focus on POC platforms.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Molecular modeling applied to corrosion inhibition, a critical review

  • Castillo-Robles, Jose Maria|||0000-0001-6583-862X
  • Martins, Ernane|||0000-0002-3892-4693
  • Ordejon, Pablo|||0000-0002-2353-2793
  • Cole, Ivan|||0000-0001-6582-1457
In the last few years, organic corrosion inhibitors have been used as a green alternative to toxic inorganic compounds to prevent corrosion in materials. Nonetheless, the fundamental mechanisms determining their inhibition performance are still far from understood. Molecular modeling can provide important insights into those mechanisms, allowing for a detailed analysis of the corrosion inhibition (CI) process. However, CI modeling is frequently underexplored and commonly used in a standardized way following a pre-determined recipe to support experimental data. We highlight six fundamental aspects (A) that one should consider when modeling CI: (A1) the electronic properties of isolated inhibitors, (A2) the interaction of the inhibitor with the surface, (A3) the surface model, (A4) the effect of the anodic and cathodic zones on the surface, (A5) the solvent effects, and (A6) the electrodes' potential effects. While A1-A3 are more frequently investigated, A4-A6 and some more complex surface models from A3 are usually not considered and represent gaps in the CI modeling literature. In this review, we discuss the main features of molecular modeling applied to CI, considering the aforementioned key aspects and focusing on the gaps that the emerging approaches aim to fill. Filling these gaps will allow performing more detailed simulations of the CI process, which, coupled with artificial intelligence (AI) methods and multiscale approaches, might construct the bridge between the nanoscale CI modeling and the continuum scale of the CI processes.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Complementary probes for the electrochemical interface

  • Pastor, Ernest|||0000-0001-5334-6855
  • Lian, Zan|||0000-0001-6922-406X
  • Xia, Lu|||0000-0002-2726-5389
  • Ecija, David|||0000-0002-8661-8295
  • Galán-Mascarós, José Ramón|||0000-0001-7983-9762
  • Barja, Sara|||0000-0002-4257-2651
  • Giménez, Sixto|||0000-0002-4522-3174
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • López, Núria|||0000-0001-9150-5941
  • García de Arquer, F. Pelayo|||0000-0003-2422-6234
The functions of electrochemical energy conversion and storage devices rely on the dynamic junction between a solid and a fluid: the electrochemical interface (EI). Many experimental techniques have been developed to probe the EI, but they provide only a partial picture. Building a full mechanistic understanding requires combining multiple probes, either successively or simultaneously. However, such combinations lead to important technical and theoretical challenges. In this Review, we focus on complementary optoelectronic probes and modelling to address the EI across different timescales and spatial scales - including mapping surface reconstruction, reactants and reaction modulators during operation. We discuss how combining these probes can facilitate a predictive design of the EI when closely integrated with theory.