Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 105
Encontrada(s) 2 página(s)

BULERIA. Repositorio Institucional de la Universidad de León
Publicación Artículo científico (JournalArticle)

Logical deductive processes as time consuming events: instance versus execution of logical arguments

  • Salto Alemany, Francisco
[EN] The point of this paper is to show that deductive arguments may not be executed in deductive inferences, and reciprocally, deductive inferences, if they existed, may not instantiate deductive arguments. Three reasons for making this distinction between instances and executions of logical arguments are offered. For example, the pragmatic expectation of the consequent may instantiate a Modus Ponens argument form, but it does not execute a logical deduction. The proposed distinction clarifies the current state of the art on factual logically deductive inferences in two opposed directions: first, exemplifying a deductive argument is not enough for an inference to be deductive, and second, the same energy and timeconsuming process may both execute and instantiate a deductive argument. Future experiments may show or discard the existence of recursive and semirecursive processes being deductive inferences, that is, being at the same time instance and execution of a deductive argument form. Keywords: time consuming logicality; deductive argument; deductive inference; instance; execution; realization; recursion; semi-recursion, SI, Proyectos FEDER UNIÓN EUROPEA JUNTA DE CASTILLA Y LEÓN, Unión Europea y Junta de Castilla y León
Docta Complutense
Publicación Artículo científico (JournalArticle)

The global biogeography and environmental drivers of fairy circles

  • Guirado, Emilio
  • Delgado Baquerizo, Manuel
  • Benito, Blas M.
  • Molina Pardo, José Luis
  • Berdugo Vega, Miguel
  • Martínez Valderrama, Jaime
  • Maestre, Fernando T.
Fairy circles (FCs) are regular vegetation patterns found in drylands of Namibia and Western Australia. It is virtually unknown whether they are also present in other regions of the world and which environmental factors determine their distribution. We conducted a global systematic survey and found FC-like vegetation patterns in 263 sites from 15 countries and three continents, including the Sahel, Madagascar, and Middle-West Asia. FC-like vegetation patterns are found in environments characterized by a unique combination of soil (including low nutrient levels and high sand content) and climatic (arid regions with high temperatures and high precipitation seasonality) conditions. In addition to these factors, the presence of specific biological elements (termite nests) in certain regions also plays a role in the presence of these patterns. Furthermore, areas with FC-like vegetation patterns also showed more stable temporal productivity patterns than those of surrounding areas. Our study presents a global atlas of FCs and provides unique insights into the ecology and biogeography of these fascinating vegetation patterns.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A High-Throughput Sequencing Strategy for Clinical Repertoire Profiling of T Cell Receptor Beta Chain, Development and Reference Values Across Healthy Adults, Paediatrics, and Cord Blood Units

  • Enrich, Emma|||0000-0001-9183-1333
  • Antón-Iborra, Mireia|||0000-0002-0630-5222
  • Hobeich, Carlos
  • Mora-Buch, Rut|||0000-0002-0117-0007
  • Lara-de-León, Ana Gabriela|||0000-0002-2884-8228
  • Parra-Martínez, Alba|||0000-0002-9564-8912
  • Sánchez, Belén
  • Vidal, Francisco|||0000-0001-8089-4945
  • Soler Palacín, Pere|||0000-0002-0346-5570
  • Rudilla, Francesc|||0000-0002-3099-067X
T cell receptor (TCR) profiling using next-generation sequencing (NGS) enables high-throughput, in-depth analysis of repertoire diversity, offering numerous clinical applications. We developed a DNA-based strategy to analyse the TCRβ-chain using NGS and established reference values for T cell repertoire characteristics in 74 healthy donors, including 44 adults, 20 paediatrics, and 10 cord blood units (CBUs). Additionally, four paediatric patients with combined immunodeficiency (CID) or severe CID (SCID) due to deleterious mutations in recombination activating genes (RAG) were analysed. The developed strategy demonstrated high specificity, reproducibility, and sensitivity, and all functional variable and joining genes were detected with minimal PCR bias. All donors had a Gaussian-like distribution of complementary-determining region 3 length, with lower presence of non-templated nucleotides and higher proportion of non-functional clonotypes in CBUs. Both CBUs and paediatrics showed greater convergence and TCRβ diversity was significantly lower in adults and donors with cytomegalovirus-positive serostatus. Finally, an analysis of paediatric patients with RAG-SCID/CID showed significantly shorter CDR3 region length and lower repertoire diversity compared to healthy paediatrics. In summary, we developed a reliable and feasible TCRβ sequencing strategy for application in the clinical setting, and established reference values that could assist in the diagnosis and monitoring of pathological conditions affecting the T cell repertoire.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Absolute Quantification and Spatial Mapping of Hyaluronic Acid in Histological Tissue Sections

  • Quilez López, Cristina
  • González-Rico Iriarte, Jorge
  • López Donaire, Maria Luisa
  • Gago López, Nuria
  • Muñoz Barrutia, María Arrate
  • Velasco Bayón, Diego
We present an accessible methodology for the absolute quantification and spatial mapping of hyaluronic acid (HA) in paraffin-embedded tissues. Although HA plays critical roles in tissue hydration, organization, and disease progression, its local concentration and spatial distribution remain poorly defined due to the lack of quantitative measurement tools. By integrating immunofluorescence, ELISA, and image analysis our approach enables the generation of pixel-level HA concentration maps. This strategy bridges the gap between qualitative imaging modalities and bulk biochemical assays, offering both spatial resolution and quantitative data. The method is validated across multiple tissues and is robust, scalable, and readily applicable to other extracellular matrix components, offering a practical tool for studying tissue microenvironments in health, disease, and biomaterial design., We present an accessible methodology for the absolute quantification and spatial mapping of hyaluronic acid (HA) in paraffin-embedded tissues. Although HA plays critical roles in tissue hydration, organization, and disease progression, its local concentration and spatial distribution remain poorly defined due to the lack of quantitative measurement tools. By integrating immunofluorescence, ELISA, and image analysis our approach enables the generation of pixel-level HA concentration maps. This strategy bridges the gap between qualitative imaging modalities and bulk biochemical assays, offering both spatial resolution and quantitative data. The method is validated across multiple tissues and is robust, scalable, and readily applicable to other extracellular matrix components, offering a practical tool for studying tissue microenvironments in health, disease, and biomaterial design.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Unraveling the potential of hypothalamic deep brain stimulation for obesity: Impacts on memory, neuroplasticity and brain metabolism in the Zucker rat

  • Casquero Veiga, Marta
  • Llorca Torrarba, Meritxell
  • Bueno Fernández, Clara
  • Romero Miguel, Diego
  • Lamanna Rama, Nicolás
  • Winter, Christine
  • Berrocoso, Esther
  • Nacher, Juan
  • Desco Menéndez, Manuel
  • Soto Montenegro, María Luisa
The lateral hypothalamus (LH) plays a key role in regulating energy balance and appetite, making it a potential target for deep brain stimulation (DBS) in treatment-resistant obesity. In this study, we evaluated the short and long-term in vivo effects of continuous LH-DBS over 15 days in a genetic model of obesity: the Zucker rat. We examined changes in body weight, brain glucose metabolism (via positron emission tomography, PET), and memory performance, along with ex vivo neuroplasticity in different hippocampal layers one month post-treatment. Contrary to expectations, continuous LH-DBS did not reduce the weight gain or food intake. While stimulated rats exhibited hippocampal hypermetabolism and enhanced synaptogenesis, these changes did not translate into cognitive improvements. Interestingly, long-term memory benefits were observed in all animals that underwent surgery, regardless of whether they received stimulation. In conclusion, our results do not support continuous LH-DBS as an effective treatment to reduce body weight in cases of obesity with genetic leptin resistance. However, the hippocampal modulation induced by continuous LH-DBS shows potential for addressing cognitive impairments associated with leptin resistance. These findings suggest that alternative DBS protocols may help restore hippocampal function, warranting further investigation., We thank Esther Rodríguez-Flores for her support in neuroplasticity data collection. MLS was supported by Ministerio de Ciencia e Innovación, Instituto de Salud Carlos III (project number PI17/01766, and grant number BA21/00030), co-financed by the European Regional Development Fund (ERDF), “A way of making Europe”; project PID2021-128862OB-I00 funded by MCIN /AEI /10.13039/501100011033 / FEDER, UE; CIBER de Salud Mental - Instituto de Salud Carlos III (project number CB07/09/0031); Delegación del Gobierno para el Plan Nacional sobre Drogas (project number 2017/085, Project number 2024I090); Delegación del Gobierno para el Plan Nacional sobre Drogas correspondiente a fondos del Mecanismo de Recuperación, Transformación y Resiliencia de la Unión Europea (EXP2022/008917), II Edición de Ayudas a la Investigación en Nutrición de iSanidad-Herbalife, and Fundación Mapfre. MCV was supported by Fundación Tatiana Pérez de Guzmán el Bueno as scholarship holder of this institution. DRM was supported by Consejería de Educación e Investigación, Comunidad de Madrid, co-funded by European Social Fund “Investing in your future” (grant number PEJD-2018-PRE/BMD-7899). NLR was supported by Instituto de Investigación Sanitaria Gregorio Marañón, “Programa Intramural de Impulso a la I+D+I 2019”. MD work was supported by Ministerio de Ciencia e Innovación (MCIN) and Instituto de Salud Carlos III (PT23/00027). The CNIC is supported by the Instituto de Salud Carlos III (ISCIII), the Ministerio de Ciencia e Innovación (MCIN) and the Pro CNIC Foundation, and is a Severo Ochoa Center of Excellence (SEV‐2015‐0505). MLT and EB were supported by grants: co-financed by the “Fondo Europeo de Desarrollo Regional” (FEDER)-UE “A way to build Europe” from the “Ministerio de Economía y Competitividad” (project number MINECO: RTI2018-099778-B-I00); from the “Plan Nacional sobre Drogas, Ministerio de Sanidad, Consumo y Bienestar Social” (project number 2019I041); from the “Programa Operativo de Andalucía FEDER, Iniciativa Territorial Integrada ITI 2014-2020 Consejería Salud, Junta de Andalucía” (projects numbers PI-0080-2017 and PI-0009-2017); from the “Consejería de Salud de la Junta de Andalucía” (project number PI-0134-2018); from the University of Cádiz (project number PR2019-046); from the “Instituto de Investigación e Innovación en Ciencias Biomédicas de Cádiz-INiBICA” (project number IN-C09); from the “Consejería de Economía, Innovación, Ciencia y Empleo de la Junta de Andalucía” (grant number CTS-510); from the “CIBERSAM” (project number CB07/09/0033). Support for Nacher’s lab came from Ministry of Economy and Competitiveness (project number RTI2018-095698-B-I00) and Generalitat Valenciana (project number PROMETEO2020/024).
Repisalud
Publicación Artículo científico (JournalArticle)

Expression of miR-135b in Psoriatic Skin and Its Association with Disease Improvement.

  • Chicharro, Pablo
  • Rodríguez-Jiménez, Pedro
  • Llamas-Velasco, Mar
  • Montes, Nuria
  • Sanz-García, Ancor
  • Cibrián, Danay
  • Vara, Alicia
  • Gomez, Manuel J
  • Jiménez-Fernández, María
  • Martínez-Fleta, Pedro
  • Sánchez-García, Inés
  • Lozano-Prieto, Marta
  • Triviño, Juan C
  • Miñambres, Rebeca
  • Sanchez-Madrid, Francisco
  • de la Fuente, Hortensia
  • Dauden, Esteban
miRNAs have been associated with psoriasis since just over a decade. However, we are far from a complete understanding of their role during the development of this disease. Our objective was to characterize the cutaneous expression of miRNAs not previously described in psoriasis, the changes induced following the treatment with biologicals and their association with disease improvement. Next generation sequencing was performed from five skin samples from psoriasis patients (lesional and non-lesional skin) and five controls, and from this cohort, 12 microRNAs were selected to be analyzed in skin samples from 44 patients with plaque psoriasis. In 15 patients, an additional sample was obtained after three months of biological treatment. MiR-9-5p, miR-133a-3p and miR-375 were downregulated in the lesional skin of psoriasis patients. After treatment, expression of miR-133a-3p, miR-375, miR-378a and miR-135b in residual lesions returned towards the levels observed in non-lesional skin. The decrease in miR-135b levels after treatment with biologics was associated with both the improvement of patients evaluated through Psoriasis Area and Severity Index score and the decrease in local inflammatory response. Moreover, basal expression of miR-135b along with age was associated with the improvement of psoriasis, suggesting its possible usefulness as a prognostic biomarker.
Repisalud
Publicación Artículo científico (JournalArticle)

Extracellular Vesicle-Mediated Immune Regulation of Tissue Remodeling and Angiogenesis After Myocardial Infarction

  • Sánchez-Alonso, Santiago
  • Alcaraz-Serna, Ana
  • Sanchez-Madrid, Francisco
  • Alfranca, Arantzazu
Myocardial ischemia-related disorders constitute a major health problem, being a leading cause of death in the world. Upon ischemia, tissue remodeling processes come into play, comprising a series of inter-dependent stages, including inflammation, cell proliferation and repair. Neovessel formation during late phases of remodeling provides oxygen supply, together with cellular and soluble components necessary for an efficient myocardial reconstruction. Immune system plays a central role in processes aimed at repairing ischemic myocardium, mainly in inflammatory and angiogenesis phases. In addition to cellular components and soluble mediators as chemokines and cytokines, the immune system acts in a paracrine fashion through small extracellular vesicles (EVs) release. These vesicular structures participate in multiple biological processes, and transmit information through bioactive cargoes from one cell to another. Cell therapy has been employed in an attempt to improve the outcome of these patients, through the promotion of tissue regeneration and angiogenesis. However, clinical trials have shown variable results, which put into question the actual applicability of cell-based therapies. Paracrine factors secreted by engrafted cells partially mediate tissue repair, and this knowledge has led to the hypothesis that small EVs may become a useful tool for cell-free myocardial infarction therapy. Current small EVs engineering strategies allow delivery of specific content to selected cell types, thus revealing the singular properties of these vesicles for myocardial ischemia treatment.
Repisalud
Publicación Artículo científico (JournalArticle)

The Swing of Lipids at Peroxisomes and Endolysosomes in T Cell Activation.

  • Dosil, Sara G
  • Rojas-Gomez, Amelia
  • Sanchez-Madrid, Francisco
  • Martin-Cofreces, Noa B.
The immune synapse (IS) is a well-known intercellular communication platform, organized at the interphase between the antigen presenting cell (APC) and the T cell. After T cell receptor (TCR) stimulation, signaling from plasma membrane proteins and lipids is amplified by molecules and downstream pathways for full synapse formation and maintenance. This secondary signaling event relies on intracellular reorganization at the IS, involving the cytoskeleton and components of the secretory/recycling machinery, such as the Golgi apparatus and the endolysosomal system (ELS). T cell activation triggers a metabolic reprogramming that involves the synthesis of lipids, which act as signaling mediators, and an increase of mitochondrial activity. Then, this mitochondrial activity results in elevated reactive oxygen species (ROS) production that may lead to cytotoxicity. The regulation of ROS levels requires the concerted action of mitochondria and peroxisomes. In this review, we analyze this reprogramming and the signaling implications of endolysosomal, mitochondrial, peroxisomal, and lipidic systems in T cell activation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental observation of higher-order anapoles in individual silicon disks under in-plane illumination

  • Díaz-Escobar, Evelyn
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Barreda-Gómez, Ángela Inmaculada
[EN] Anapole states¿characterized by a strong suppression of far-field scattering¿naturally arise in high-index nanoparticles as a result of the interference between certain multipolar moments. Recently, the first-order electric anapole, resulting from the interference between the electric and toroidal dipoles, was characterized under in-plane illumination as required in on-chip photonics. Here, we go a step further and report on the observation of higher-order (magnetic and second-order electric) anapole states in individual silicon disks under in-plane illumination. To do so, we increase the disk dimensions (radius and thickness) so that such anapoles occur at telecom wavelengths. Experiments show dips in the far-field scattering perpendicular to the disk plane at the expected wavelengths and the selected polarizations, which we interpret as a signature of high-order anapoles. Some differences between normal and in-plane excitation are discussed, in particular, the non-cancelation of the sum of the Cartesian electric and toroidal moments for in-plane incidence. Our results pave the way toward the use of different anapole states in photonic integrated circuits either on silicon or other high-index dielectric materials., This work was supported by Generalitat Valenciana under Grant No. GRISOLIAP/2018/164, the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) through the International Research Training Group (IRTG) 2675 "Meta-ACTIVE," Project No. 437527638, and Generalitat Valenciana (Grant Nos. PROMETEO/2019/123, IDIFEDER/2020/041, and IDIFEDER/2021/061).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of chitin nanocrystals on the dielectric behaviour and conductivity of chitosan-based bionanocomposites

  • Salaberria, A.M.
  • Badia, J.D.
  • Fernandes, S.C.M.
  • Sáenz de Juano-Arbona, V.
  • Labidi, J.
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] A series of bionanocomposite films based on chitosan, reinforced with chitin nanocrystals, were developed, and assessed in terms of dielectric behaviour and conductivity by using an experimental methodology that allows avoiding the conductivity contribution and the exclusion of contact and interfacial polarization effects. The dielectric relaxations at low and high frequency and temperatures were modeled by Havriliak-Negami functions. Below the glass transition temperature (Tg), the gamma and beta relaxations were observed, which were related to intramolecular and non-cooperative segmental movements. At higher temperatures, an intermolecular and cooperative macromolecular movement, related to the glass transition, gave rise to alpha-relaxation. In addition, two over-Tg p(I) and p(II) relaxations were found, which were related to the displacement of dipoles in the disordered structure of bionanocomposites. The addition of chitin nanocrystals did not affect the apparent activation energy Ea of the gamma-relaxation. However, it decreased the Ea of the beta-relaxation and increased the free volume at temperatures in the vicinities of the alpha-relaxation. Finally, the electric conductivity of the bionanocomposites was lower than that of neat chitosan and chitin due to the interaction between the-OH and-NH2 groups that reduced the ionic mobility, along with the increase of free volume, with the subsequent separation of phases., The European Regional Development Funds and the Spanish Ministry of Science and Innovation for the concession of Research Projects ENE2014-53734-C2-1-R, UPOV13-3E-1947 and ENE2017-86711-C3-1-R are appreciated. Generalitat Valenciana is acknowledged for the project APOSTD14/041 for JD Badia and GRISOLIA/2002/003 for R. Teruel-Juanes. The authors are thankful for the financial support from the Department of Education of the Basque Government (IT1008-18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Long-term properties and end-of-life of polymers from renewable resources

  • Badia, J.D.
  • Gil-Castell, O.
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] The long-term properties and end-of-life of polymers are not antagonist issues. They actually are inherently linked by the duality between durability and degradation. The control of the service-todisposal pathway at useful performance, along with low-impact disposal represents an added-value. Therefore, the routes of design, production, and discarding of bio-based polymers must be carefully strategized. In this sense, the combination of proper valorisation techniques, i.e. material, energetic and/ or biological at the most appropriate stage should be targeted. Thus, the consideration of the end-of-life of a material for a specific application, instead of the end-of-life of a material should be the fundamental focus. This review covers the key aspects of lab-scale techniques to infer the potential of performance and valorisation of polymers from renewable resources as a key gear for sustainability., The authors acknowledge the European Funds of Regional Development and the Spanish Ministry of Economy and Competitiveness for the projects POLYCELL (ENE2014-53734-C2-1-R) and TETRA-SEC (UPOV13-3E-1947). Generalitat Valenciana is recognized for the BIOARMED project (APOSTD/2014/041) for J.D. Badia. The Spanish Ministry of Education, Culture and Sports is thanked for the FPU grant of O. Gil-Castell (FPU13/01916). J.D. Badia wants to dedicate this article to his wife Mireia, for her peaceful dedication and joyful love.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An alternative approach to the kinetic modeling of pharmaceuticals degradation in high saline water by electrogenerated active chlorine species

  • Flores-Terreros, Ruth R.
  • Serna-Galvis, Efraím A.
  • Torres-Palma, Ricardo A.
  • Nieto-Juárez, Jessica I.
  • Navarro-Laboulais, J.|||0000-0001-6347-5407
[EN] A semiempirical approach considering the rate of reactive chlorine species -RCS-production (phi E) as a function of current and Cl- concentration for the modeling of acetaminophen (ACE) degradation is presented. A filter-press reactor having a Ti/RuO2-ZrO2 (Sb2O3 doped) anode, NaCl (0.04-0.1 mol L-1) as supporting electrolyte, and operated in continuous mode, was considered. A current of 100 mA and a flow of 11 mL min(-1) favored the electrogeneration of RCS and ACE degradation. Hydraulic retention time and phi E were the most relevant parameters for the RCS production. These two parameters, plus the pollutant concentration, were very determinant for the ACE degradation. The model successfully reproduced the ACE removal in distilled water at different concentrations (10, 20, 40, and 60 mg L-1). The electrochemical system achieved removals between 80 and 100% of ACE in distilled water. The ACE treatment in actual seawater (a chloride-rich matrix, 0.539 mol L-1 of Cl-) was assessed, and the degradation was simulated using the developed model. The competing role toward electrogenerated RCS by intrinsic organic matter (3.2 mg L-1) in the seawater was a critical point, and the simulated values fitted well with the experimental data. Finally, the action of the electrochemical system on ciprofloxacin (CIP) in real seawater and its antimicrobial activity was tested. CIP removal (100% at 120 s) was faster than that observed for ACE (100% of degradation after 180 s) due to CIP has amine groups that are more reactive toward RCS than phenol moiety on ACE. Moreover, the system removed 100% of the antimicrobial activity associated with CIP, indicating a positive environmental effect of the treatment., The authors from GICAB acknowledge the financial support provided by Proyecto de Mejoramiento y Ampliacion de los Servicios del Sistema Nacional de Ciencia Tecnologia e Innovacion Tecnologica 8682-PE, Banco Mundial, CONCYTEC and PROCIENCIA through grant E041-01 (N32-2018- FONDECYT-BM-IADT-AV). The authors from GIRAB acknowledge the support provided by Universidad de Antioquia UdeA by means of "Programa de Sostenibilidad", and MINCIENCIAS COLOMBIA, grant No. 111577757323 (Convocation 777-2017). E. A. Serna-Galvis thanks MINCIENCIAS COLOMBIA for his Ph.D. fellowship during July 2015-June 2019 (Convocation 647 de 2014), and the Postdoctoral scholarship (Convocation 848-2019).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dielectric spectroscopy of novel thiol-ene/epoxy thermosets obtained from allyl-modified hyperbranched poly(ethyleneimine) and diglycidylether of bisphenol A

  • Badia, J.D.
  • Acebo, C.
  • Gil-Castell, O.
  • Serra, A.
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] Dielectric Thermal Analysis (DETA) of a series of new thermoset obtained by click chemistry was performed. The new thermosets were obtained by a dual-curing process consisting in a first photochemical thiol-ene, followed by a thermal thiol-epoxy starting from an allyl-terminated hyperbranched poly(ethyleneimine) (HBPEI) and different proportions of diglycidylether of bisphenol A (DGEBA) and the corresponding stoichiometric proportions of pentaerythritol tetrakis (3-mercaptopropionate, PETMP). The dielectric behaviour was obtained experimentally supressing the conductive effects. Two sub-Tg intramolecular non-cooperative gamma and beta relaxations and an intermolecular cooperative alpha-relaxation were detected. The gamma-relaxation was ascribed to the dipole orientation of the terminal thiol groups. Two gamma relaxations gamma(epo) and gamma(ene) were observed, according to the influence of the surroundings. Only thermosets with a content of flexible HBPEI/PETMP domains higher than a 50% w/w showed the gamma(ene) relaxation at lower temperatures and higher frequencies. The beta-relaxation was a non-Johari-Goldstein relaxation, ascribed to the dipole transfer of the linear -CH2-O-(C=O)-CH2-CH2- groups of the thiol constrained in the glassy state. The alpha-relaxation was ascribed to the long-term segmental movements of the thermosets, occurring during the transition from the glassy to the rubbery stage. A synergic effect of reducing the rigidity and compactness of the thermosets by the reduction of aromatic moieties of the DGEBA/PETMP units, and the increase of the flexibility induced by the addition of HBPEI/PETMP units affected the macromolecular movement of the thermosets., European Regional Development Funds and the Spanish Ministry of Science, Innovation and Universities for ENE2017-86711-C3-1-R, MAT2017-82849-C2-1-R, ENE2014-53734-C2-1-R, UPOV13-3E-1947 and projects. Ministry of Education for the FPU13/01916) for O. Gil-Castell. Generalitat de Catalunya for the 2017-SGR-77 project. Generalitat Valenciana for the APOSTD14/041 for JD Badia and GRISOLIA/2012/003 for R. Teruel-Juanes.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of Eucalyptus nitens and Pinus radiata fiber properties on the production process of lignocellulose nanofibrils

  • Albornoz-Palma, Gregory Piero Horacio|||0000-0002-1194-976X
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • Henríquez-Gallegos, Sergio
  • Ortega-Sanhueza, Isidora
  • Pereira, Miguel
[EN] The physical and chemical properties of the plant cells that make up the raw material are diverse and affect the properties of lignocellulose nanofibrils (LCNFs). Due to their chemical differences, understanding the effect that the physical properties of the raw material confer on LCNFs is complex. This study aims at comprehending the impact that the physical properties and the chemical composition of the raw materials from Pinus radiata D. Don and Eucalyptus nitens Maiden have on the mechanical processes of fibrillation and the final properties of LCNFs. The anatomical, physical, and component differences of the fibers in the different fractions and species showed a non-effect on the longitudinal disintegration during the mechanical processes of fibrillation. In addition, the LCNFs produced from smaller fibers showed a smaller average width, with Eucalyptus nitens being the species that had smaller and more homogeneous nanofibrils. Nevertheless, the organization of the components (hemicellulose) from Pinus radiata on the surface of the fibrils, generates very hydrated and large fibrils and flocs, increasing the viscosities of the LCNF suspensions. A model was established between the intrinsic viscosity ( [ eta]) and aspect ratio ( p) of LCNFs ( rho[ eta] = 0.15p(1.68)) and delignified CNFs ( rho[ eta] = 0.031p(1.94)) that are independent of the pretreatments and the flexibility of the fibrils. Finally, the glass transition temperatures of lignin were not affected by physical changes in the raw material., This work was funded by the Agencia Nacional de Investigacion y Desarrollo (ANID)/Doctorado Nacional/2018-21181080, and projects FONDECYT No 1201042 and INNOMAT-H2 (MFA/2022/041) (Conselleria d'Innovacio, Universitats, Ciencia i Societat Digital).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Performance of Copper as a Catalyst for Fenton-like Processes in Highly Saline Solutions

  • Orts, Xavier
  • Arévalo-Aguado, Jordi|||0000-0002-0669-0933
  • Arqués Sanz, Antonio|||0000-0001-8692-6979
  • Amat Payá, Ana María|||0000-0003-4218-2685
  • Santos-Juanes Jordá, Lucas|||0000-0001-5539-8341
[EN] The catalytic performance of copper in Fenton-like processes was investigated under conditions of elevated chloride concentrations. Model solutions were prepared containing four target pollutants (50 mg/L each), Cu (II) at 50 mg/L, and a stoichiometric dose of hydrogen peroxide sufficient for complete oxidation of the organic matter. Chloride levels ranged from low concentrations to those representative of both synthetic and natural seawater (36 g/L NaCl). An increase in chloride concentration consistently led to greater pollutant removal efficiency. The influence of pH on process performance was also assessed in saline and real seawater matrices. An optimal pH range between 6 and 7 was identified in both cases, where the reactivity of copper-chloride complexes was maximized while the formation of insoluble, catalytically inactive copper species was suppressed. Monitoring of pH, soluble copper concentration, and hydrogen peroxide consumption supported the conclusion that real seawater provides the most favorable conditions for copper-chloride catalyzed Fenton-like reactions. These results demonstrate the high potential of copper-based advanced oxidation processes in saline environments, particularly in applications where traditional methods exhibit limited efficiency., The authors thank the financial support of the European Union Next Generation EU-Proyectos de Transicion Ecologica y Transicion Digital (TED2021-130994B-C32-ECOTRANSEAS) and Spanish Ministerio de Ciencia e Innovacion Plan Nacional de Investigacion (PID2021-126400OB-C31-AQUAENAGRI). Jordi Arévalo thanks Project AGROALNEXT/2022/041, funded by European Union NextGenerationEU (PRTR-C17) with the support of Ministerio de Ciencia e Innovación Spanish Government and Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electron Channeling Contrast Imaging for the Characterization of Dislocations in III-V Thin Films on Silicon (001)

  • Monge-Bartolome, Laura
  • Mouriño-Miñambres, Paula|||0009-0003-6511-1246
  • Sinusia-Lozano, Miguel|||0000-0002-1744-4148
  • Gómez-Hernández, Víctor Jesús|||0000-0003-2364-8814
  • Peiro Codoñer, Alicia
  • Yan, Zhao
  • Garcia Vara, Ivan
  • Baron, Thierry
  • Li, Qiang
[EN] Characterization of defects is essential for the semiconductor industry, as they can be detrimental to device performance. Electron channeling contrast imaging(ECCI) is an electron diffraction technique performed in a scanning electron microscope that has emerged as a fast and nondestructive technique for defect characterization. Herein, ECCI is applied to the characterization of extended defects in the heteroepitaxy of III¿V semiconductor thin ¿lms on silicon. Thein¿uence of the electron-beam parameters (beam energy and current) is studied to optimize the ECCI micrographs. Additionally, the in¿uence of the diffraction condition on the visibility and contrast of two types of extended defects¿threading dislocations and stacking faults¿is studied. Moreover, the in¿uence of the diffraction conditions on the density of extended defects measured in the ECCI micrographs is studied, giving a lower limit of the extended defects density. This work shows that ECCI is a promising technique for deep study of extended defects in the heteroepitaxy of III¿V semiconductor thin ¿lms on Si, revealing a huge potential for wafer mapping, which is crucial for homogeneity testing and scalability., This work was supported in part by the project Zero-loss Energy harvesting Using nanowire solar cells in Space , funded by the European Union, Horizon Europe, EIC Project 101161465 (ZEUS). M.S.L. acknowledges financial support from the Generalitat Valenciana (Project: CIAPOS/2021/293). L.M.B. acknowledges Ayuda a Primeros Proyectos de Investigación (PAID-06-24), Vicerrectorado de Investigación de la Universitat Politècnica de València (UPV). V.J.G. acknowledges the Generalitat Valenciana (CDEIGENT/2020/009, and ESGENT/2024/17), the Conselleria de Educación, Universidades y Empleo under the NIRVANA Grant (PROMETEO Program, CIPROM/2022/14), and to the AGENCIA ESTATAL DE INVESTIGACIÓN of Ministerio de Ciencia, Innovacion y Universidades Grant CNS2023-145093 funded by MICIU/AEI/10.13039/ 501100011033 and by European Union NextGenerationEU/PRTR . All authors acknowledge AGENCIA ESTATAL DE INVESTIGACIÓN of Ministerio de Ciencia e Innovacion (PID2024-162261NB-I00 and EQC2021- 007244-P) and to the European Regional Development Fund (ERDF) (IDIFEDER/2020/041, IDIFEDER/2021/061), and the Quantum Communications program supported by Ministerio de Ciencia e Innovacion (MCIN) with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (COMCUANTICA/003).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optomechanical Cavities Based on Epitaxial GaP on Nominally (001)-Oriented Si

  • Mouriño-Miñambres, Paula|||0009-0003-6511-1246
  • Mercadé, Laura|||0000-0002-4994-7727
  • Sinusia-Lozano, Miguel|||0000-0002-1744-4148
  • Resta-López, Raquel|||0009-0007-8657-0782
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Gómez-Hernández, Víctor Jesús|||0000-0003-2364-8814
  • Ben Saddik, Karim
  • Barrigón, Enrique
  • Fernández-Garrido, Sergio
  • García, Basilio Javier
[EN] Gallium Phosphide (GaP) has recently received considerable attention as a suitable material for building photonic integrated circuits due to its remarkable optical and piezoelectric properties. Usually, GaP is grown epitaxially on III-V substrates to keep its crystallinity and later transferred to silicon wafers for further processing. Here, an alternative promising route for the fabrication of optomechanical (OM) cavities on GaP epitaxially grown on nominally (001)-oriented Si is introduced by using a two-step process consisting of a low-temperature etching of GaP followed by selective etching of the underneath silicon. The low-temperature (-30 degrees C) during the dry-etching of GaP hinders the lateral etching rate, preserving the pattern with a deviation between the design and the pattern in the GaP layer lower than 5%, avoiding the complex process of transferring and bonding a GaP wafer to a silicon-on-insulator wafer. To demonstrate the quality and feasibility of the proposed fabrication route, suspended OM cavities are fabricated and experimentally characterized. The cavities exhibit optical quality factors between 103 and 104 at telecom wavelengths, and localized mechanical resonances approximate to 3.1 GHz with quality factors approximate to 63 when measured at room temperature. These results suggest a simple and low-cost way to build GaP-based photonic devices directly integrated on industry-standard Si(001) photonic wafers.; Here, optomechanical (OM) cavities on Gallium Phosphide (GaP) epitaxially grown on exact (001)-Si are fabricated following a novel two-step dry-etching process. The suspended OM cavities showed optical Q-factors up to 104 at telecom wavelengths, and mechanical resonances at approximate to 3.1 GHz at room temperature, suggesting a simple and low-cost way to build GaP-based photonic devices directly integrated on Si(001) photonic wafers. image, P.M. and L.M. contributed equally to this work. V.J.G., P.M, and R.R acknowledge financial support from the Generalitat Valenciana (Project: INVEST/2022/170). M.S.L. acknowledges financial support from the Generalitat Valenciana (Project: CIAPOS/2021/293). V.J.G. acknowledges financial support from the Generalitat Valenciana (CDEIGENT/2020/009), partial funding from the Conselleria de Educacion, Universidades y Empleo under the NIRVANA Grant (PROMETEO Program, CIPROM/2022/14), and to the AGENCIA ESTATAL DE INVESTIGACION of Ministerio de Ciencia, Innovacion y Universidades Grant CNS2023-145093 funded by MICIU/AEI/10.13039/501100011033 and by "European Union NextGenerationEU/PRTR". S.F.G. acknowledges the financial support received through the program Ramon y Cajal (co-financed by the European Social Fund) under Grant No. RYC-2016-19509. All authors acknowledge financial support from The AGENCIA ESTATAL DE INVESTIGACION of Ministerio de Ciencia e Innovacion (PID2020-118855RB-I00, PID2020-114280RB-I00, and PID2021-124618NB-C21) and to the European Regional Development Fund (ERDF) (IDIFEDER/2020/041, IDIFEDER/2021/061). This study formed part of the Quantum Communications program and was supported by Ministerio de Ciencia e Innovacion (MCIN) with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (COMCUANTICA/003 and COMCUANTICA/004).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of hydrothermal ageing on the thermal stability, morphology and viscoelastic performance of PLA/sisal biocomposites

  • Gil Castell, Óscar
  • Badía Valiente, José David
  • Kittikorn, T.
  • Strömberg, E.
  • Ek, Martina
  • Karlsson, S.
  • Ribes-Greus, A.|||0000-0003-2460-8291
The influence of the combined exposure to water and temperature on the behaviour of polylactide/sisal biocomposites coupled with maleic acid anhydride was assessed through accelerated hydrothermal ageing. The biocomposites were immersed in water at temperatures from 65 to 85 °C, between the glass transition and cold crystallisation of the PLA matrix. The results showed that the most influent factor for water absorption was the percentage of fibres, followed by the presence of coupling agent, whereas the effect of the temperature was not significant. Deep assessment was devoted to biocomposites subjected to hydrothermal ageing at 85 °C, since it represents the extreme degrading condition. The morphology and crystallinity of the biocomposites were evaluated by means of X-Ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM). The viscoelastic and thermal performance were assessed by means of dynamic mechanic thermal analysis (DMTA) and thermogravimetry (TGA). The presence of sisal generally diminished the thermal stability of the biocomposites, which was mitigated by the addition of the coupling agent. After composite preparation, the effectiveness of the sisal fibre was improved by the crystallisation of PLA around sisal, which increased the storage modulus and reduced the dampening factor. The presence of the coupling agent strengthened this effect. After hydrothermal ageing, crystallisation was promoted in all biocomposites therefore showing more fragile behaviour evidencing pores and cracks. However, the addition of coupling agent in the formulation of biocomposites contributed in all cases to minimise the effects of hydrothermal ageing., The authors would like to acknowledge the Spanish Ministry of Economy and Competitiveness, through the Research Project ENE2014-53734-C2-1-R and UPOV13-3E-1947. The Spanish Ministry of Education, Culture and Sports is also thanked for the pre-doctoral FPU grant of O. Gil-Castell (FPU13/01916). Generalitat Valenciana is thanked for the APOSTD14/041 program for J.D. Badia. The Chilean Government is thanked for the 13CEI2-21839 project. The financial support given by the Prince of Songkla University and KTH Royal Institute of Technology is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

One-dimensional diesel spray modeling of multicomponent fuels

  • Pastor, José V.|||0000-0003-4113-4681
  • García-Oliver, José M|||0000-0002-2676-9681
  • Pastor Enguídanos, José Manuel|||0000-0003-4458-0353
  • Vera-Tudela Fajardo, Walter Martin
[EN] The present work reports a one-dimensional model to predict the liquid length and spray penetration of diesel sprays when using blends of single-component fuels. A high-pressure liquid-vapour equilibrium has been implemented by means of fugacity coefficients, together with the hypothesis of a real-gas mixture to calculate the partial enthalpy of each component. The model has been validated in a first step by means of an experimental study using binary blends of n-decane and n-hexadecane, where the temporal evolution of the liquid length and vapor spray penetration have been measured. Results show that the model predicts adequately the spray penetration for the different fuels at various conditions. A six-component fuel has also been investigated. Results indicate that this fuel has a very similar evaporative behavior to n-hexadecane, which is confirmed by both experiments and model predictions., Part of this work has been developed within the frame of project B03T02 Modelling of Emission Formation and Exhaust Gas Aftertreatment, Multicomponent diesel Combustion Modelling and Validation with financial support of the "COMET K2-Competence Centres for Excellent Technologies Programme" of the Austrian Federal Ministry for Transport, Innovation and Technology (BMVIT), the Austrian Federal Ministry of Economy, Family and Youth (BMWFJ), the Austrian Research Promotion Agency (FFG), the Province of Styria, and the Styrian Business Promotion Agency (SFG). Thanks are also given to the supporting industrial and scientific project partners, namely Kompetenzzentrum-Das Virtuelle Fahrzeug Forschungsgesellschaft mbH (ViF), AVL List GmbH, OMV Refining and Marketing GmbH and Institute for Internal Combustion Engines and Thermodynamics (IVT) Graz University of Technology. Support for this research was partially provided by the Generalitat Valenciana inside the program Ajudes per a la realitzacio de projectes d'I+D per a grups de investigacio emergent (reference GV/2013/041), which is gratefully acknowledged. Also, the authors would like to thank the Pontificia Universidad Catolica del Peru for financing the first year of studies of W. Vera-Tudela and making it possible for him to start his program of PhD at the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Polycaprolactone/gelatin-based scaffolds with tailored performance: in vitro and in vivo validation

  • Gil-Castell, O.
  • Badia, J.D.
  • Ontoria-Oviedo, I.
  • Castellano, D.
  • Sepúlveda, P.
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] Nanofibrous scaffolds composed of polycaprolactone (PCL) and gelatin (Ge) were obtained through a hydrolytic assisted electrospinning process. The PCL-to-Ge proportion (100/0 to 20/80), as well as the dissolution time (24, 48, 72, 96, 120 h) into a 1:1 formic/acetic acid solvent before electrospinning were modified to obtain the different samples. A strong influence of these factors on the physicochemical properties of the scaffolds was observed. Higher Ge percentage reduced crystallinity, allowed a uniform morphology and increased water contact angle. The increase in the dissolution time considerably reduced the molar mass and, subsequently, fibre diameter and crystallinity were affected. During in vitro biocompatibility tests, higher cell adhesion and proliferation were found for the 60/40, 50/50 and 40/60 PCL/Ge compositions that was corroborated by MTT assay, fluorescence and microscopy. A weakened structure, more labile to the in vitro degradation in physiologic conditions was found for these compositions with higher dissolution times (72 and 96 h). Particularly, the 40/60 PCL/Ge scaffolds revealed an interesting progressive degradation behaviour as a function of the dissolution time. Moreover, these scaffolds were non-inflammatory, as revealed by the pyrogen test and after the 15-day subcutaneous in vivo implantation in mice. Finally, a reduction of the scar tissue area after infarction was found for the 40/60 PCL/Ge scaffolds electrospun after 72 h implanted in rat hearts. These results are especially interesting and represent a feasible way to avoid undesired inflammatory reactions during the scaffold assimilation., The Spanish Ministry of Economy and Competitiveness is acknowledged for the project RESOLTEX project (RTC-2015-4185-1). The Spanish Ministry of Education, Culture and Sports is thanked for the pre-doctoral FPU grant of O. Gil-Castell (FPU13/01916). The Generalitat Valenciana is thanked for the APOSTD/2014/041 for J.D. Badia. The Universitat Politècnica de València and IIS LaFe are acknowledged for the SCARDIO project (2014_0460_CRC_COLAB_UPVLAFE_SEPULVEDA). P. Sepúlveda acknowledges the Instituto de Salud Carlos III (ISCIII) for the I3SNS Program. This work was supported by grants PI16/0107 and RETICS Program (RD16/0011/0004) from ISCIII cofunded by the European Regional Development Fund-ERDF Una manera de hacer Europa . The City Council of Algemesí is acknowledged for the XIV Premi Cientificotècnic Ciutat d Algemesí award to O. Gil-Castell, for this work as the best young researcher of the Ribera District.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of covalent adaptable networks Based on disulfide exchange through broadband dielectric spectroscopy

  • B. Pascual-Jose|||0000-0001-7562-916X
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • De la Flor, S.
  • Serra, A.
[EN] To study the nature and the cooperativity of the disulfide exchange mechanism in covalent adaptable networks, the dielectric and conductive properties of three membranes obtained by curing diglycidyl ether of bisphenol A (DGEBA) with hexamethylenediamine (HMDA), cystamine (CYS), or a mixture of both diamines in the same proportion were studied. Significant differences in the dielectric relaxation spectra of the three membranes were observed. In the low-temperature region, the dielectric spectra displayed two non-cooperative dielectric relaxations (gamma and beta). In the DGEBA/HMDA-CYS membrane, its relaxation function and activation energy are between those corresponding to the DGEBA/HDMA and DGEBA/CYS membranes, but their relationship does not depend linearly on the composition. In the high-temperature region, a dielectric relaxation of cooperative origin related to the glass transition (alpha) was observed in the membrane cured with hexamethylenediamine. However, the relaxation related to the glass transition overlaps with the exchange of the disulfide bonds in the membranes with cystamine. The analysis of the electric conductivity (6) reveals an abrupt increment that suggests a radicalmediated dissociative bond exchange reaction may be occurring. However, the analysis of the 6DC curves is indicative of an associative bond exchange reaction. The rapid formation of new associations among radicals is proposed to explain the vitrimer-like behaviour on these CYS-containing membranes., This study forms part of the Advanced Materials programme and was supported by the Spanish Ministry of Science and Innovation with funding from European Union NextGeneration EU (PRTR-C17.11) and by Generalitat Valenciana (MFA/2022/041) . The authors also thank Universitat Politecnica de Valencia for the grant PAID-10-23 SUB.1. The authors of the Universitat Rovira i Virgili would like to thank the funding of the projects TED2021-131102B-C22 and PID2023-147128OB-C22 provided by MCNI/AEI/https://doi.org/10.13039/501100011033 and European Union "NextGenerationEU"/PRTR. They also thank to the Generalitat de Catalunya (2021-SGR-00154) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis and Raman Detection of 5-Amino-2-mercaptobenzimidazole Self-Assembled Monolayers in Nanoparticle-on-a-Mirror Plasmonic Cavity Driven by Dielectric Waveguides

  • Redolat-Querol, Javier Abilio
  • Camarena, Maria
  • Vázquez-Lozano, Juan Enrique
  • Miele, Ermanno
  • Baumberg, Jeremy J.
  • Griol Barres, Amadeu
  • Sinusia-Lozano, Miguel|||0000-0002-1744-4148
  • Gómez-Gómez, María Isabel|||0000-0001-7548-209X
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Pinilla-Cienfuegos, Elena|||0000-0002-3734-0821
[EN] Functionalization of metallic surfaces by molecular monolayers is a key process in fields such as nanophotonics or biotechnology. To strongly enhance light¿matter interaction in such monolayers, nanoparticle-on-a-mirror (NPoM) cavities can be formed by placing metal nanoparticles on such chemically functionalized metallic monolayers. In this work, we present a novel functionalization process of gold surfaces using 5-amino-2- mercaptobenzimidazole (5-A-2MBI) molecules, which can be used for upconversion from THz to visible frequencies. The synthesized surfaces and NPoM cavities are characterized by Raman spectroscopy, atomic force microscopy (AFM), and advancing¿receding contact angle measurements. Moreover, we show that NPoM cavities can be efficiently integrated on a silicon-based photonic chip performing pump injection and Raman-signal extraction via silicon nitride waveguides. Our results open the way for the use of 5-A-2MBI monolayers in different applications, showing that NPoM cavities can be effectively integrated with photonic waveguides, enabling on-chip enhanced Raman spectroscopy or detection of infrared and THz radiation., We acknowledge funding from the European Commission (THOR project, Grant Agreement No. 829067, and NextGenerationEU /PRTR and ERDF A way of making Europe ), Generalitat Valenciana under grant CIPROM/2022/14, and the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) under project grant PID2021-124618NB-C21. E.P.-C gratefully acknowledges funding from Generalitat Valenciana (Grant No. SEJIGENT/2021/039), AGENCIA ESTATAL DE INVESTIGACIÓN of Ministerio de Ciencia e Innovacion (PID2021-128442NA-I00) and to the European Regional Development Fund (ERDF) (IDIFEDER/2020/041, IDIFEDER/2021/061). J.E.V.-L. acknowledges support from Juan de la Cierva−Formación fellowship FJC2021-047776-I. M.S.L. acknowledges support from the Generalitat Valenciana (Project: CIAPOS/2021/293) and AGENCIA ESTATAL DE INVESTIGACIÓN of Ministerio de Ciencia e Innovacion (PID2020-118855RB-I00). J.R. acknowledges funding from Universitat Politecnica ̀ de Valencia ̀ (Grant No. FPI 20-10253).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Humic acids as complexing agents to drive photo-Fenton at mild pH in saline matrices: Process performance and mechanistic studies

  • Vallés-Ferrer, Ivan|||0000-0002-6510-3970
  • Santos-Juanes Jordá, Lucas|||0000-0001-5539-8341
  • Amat Payá, Ana María|||0000-0003-4218-2685
  • Arqués Sanz, Antonio|||0000-0001-8692-6979
  • Palma, D.
  • Laurenti, E.
  • Bianco Prevot, A.
[EN] The role of iron complexation on (photo)-Fenton process at mild pH has been investigated; in particular, the effect of humic acids, their interaction with chlorides and the involvement of the target pollutants has been studied. For this purpose, solutions consisting in mixture of 6 pollutants (acetaminophen, acetamiprid, amoxicillin, caffeine, carbamazepine and clofibric acid) in different matrices ( a) distilled water, b) low salinity water (1 g center dot L-1 of Cl-), c) high salinity water (30 g center dot L-1 of Cl-), d) tap water and e) real sea water) have been irradiated with simulated sunlight with and without humic acids (10 mg L-1). The ability of humic acids to complex Fe(III) resulted in an enhancement of pollutants removal as prevented iron inactivation, but in highly saline waters were they were not able to displace completely Cl- as ligands for Fe(III) and in sea water where other species could also contribute to inhibit photo-Fenton. Furthermore, pollutants with phenolic and/or carboxylic moieties also contribute to keep iron active at pH = 5, most probably by complexation. This is in line with dissolved iron at the end of the experiment and hydrogen peroxide consumption. Electron spin resonance measurements of center dot OH show a very good correlation between the radical formation and pollutants removal, indicating that in the presence of complexing agents, generation of center dot OH is favoured. These results indicate that HA could be used as auxiliary to apply photo-Fenton in low salinity environments rather than in real seawater., Authors want to acknowledge the financial support of Spanish Ministerio de Ciencia e Innovacion (PID2021-126400OB-C31, Aqua-EnAgri Project) and TED2021-130994B-C32 (Ecotranseas) funded by European Union NextGenerationEU with the support of Ministerio de Ciencia e Innovaci<acute accent>on - Spanish Government. Project AGROALNEXT/2022/041, funded by European Union NextGenerationEU (PRTR-C17) with the support of Ministerio de Ciencia e Innovacion - Spanish Government and Generalitat Valenciana in also acknowledged. Authors also acknowledge support from the Project CH4.0 under the MUR program "Dipartimenti di Eccellenza 2023-2027" (CUP: D13C22003520001). I. Valles acknowledges Ministerio de Universidades (FPU21/01336).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Alumina/molybdenum nanocomposites obtained by colloidal synthesis and spark plasma sintering

  • Fernández-González, Daniel
  • Suárez-Menéndez, Marta
  • Piñuela-Noval, Juan
  • Díaz, Luís Antonio
  • Gómez-Rodríguez, Carlos
  • García Quiñonez, Luís V.
  • Fernández-Valdés, Adolfo
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
[EN] Alumina/molybdenum nanocomposites were prepared by colloidal synthesis from alumina powder and molybdenum (V) chloride using ethanol as dispersion medium. Modified alumina was calcined at 450 ¿C in air atmosphere to remove chlorides, and then treated in a tubular furnace at 850 ¿C under Ar/H2 to reduce the MoO3 formed in the previous stage and obtain Al2O3 with molybdenum nanoparticles on the surface. Three different molybdenum contents were proposed (1, 5 and 10 wt % Mo), and pure alumina was used as reference, that were sintered by spark plasma sintering (SPS) under vacuum atmosphere at 1400 ¿C for 3 min with an applied pressure of 80 MPa. Composites were characterized by microstructure, hardness, toughness, and three-point bending test. The presence of molybdenum nanoparticles resulted in a fine-grained structure promoted by the presence of molybdenum at grain boundaries and triple points, as well as by the utilization of the SPS equipment. Hardness is at least a 20% greater and fracture toughness 30% larger in the composites than in the monolithic alumina., Daniel Fernandez-Gonzalezacknowledges the grant (Juan de la Cierva-Formacion program) FJC2019-041139-I funded by MCIN/AEI/10.13039/501100011033 (Ministerio de Ciencia e Innovacion, Agencia Estatal de Investigacion). The authors also acknowledge the financial support received from FICYT (IDI/2021/000106). Juan Pinuela Noval acknowledges the Programa Severo Ochoa of Grants for Research and Teaching of the Principality of Asturias for the funds received for the elaboration of the Ph. D. Thesis (Ref: BP20 041).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Testing Optomechanical Microwave Oscillators for SATCOM Application

  • Mercadé, Laura|||0000-0002-4994-7727
  • Ruiz-Garnica, Jesús|||0000-0002-2361-2806
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Rico, Eloy
  • Gómez, Juan Carlos
  • Piqueras, Miguel A.
  • Duarte, Vanessa C.
[EN] The realization of photonic microwave oscillators using optomechanical cavities has recently become a reality. By pumping the cavity with a blue-detuned laser, the so-called phonon lasing regime - in which a mechanical resonance is amplified beyond losses - can be reached and the input signal gets modulated by highly-coherent tones at integer multiples of the mechanical resonance. Implementing optomechanical cavities on released films with high index of refraction can lead to optical modes at telecom wavelengths and mechanical resonances in the GHz scale, resulting in highly-stable signals in the microwave domain upon photodetection. Owing to the extreme compactness of such cavities, application in satellite communications (SATCOM) seems highly appropriate, but no experiments have been reported so far. In this paper, an optomechanical microwave oscillator (OMO) built on a micron-scale silicon optomechanical crystal cavity is characterized and tested in a real SATCOM testbed. Using a blue-detuned laser, the OMO is driven into a phonon lasing state where multiple harmonics are generated, reaching tones up to 20 GHz. Under this regime, its practical applicability, remarkably addressing its performance as a photonic local oscillator, has been validated. The results, in addition with the advantages of extreme compactness and silicon-technology compatibility, make OMOs very promising candidates to build ultra-low weight photonics-based microwave oscillators for SATCOM applications., This work was supported in part by the H2020 Future and Emerging Technologies program under Grant PHENOMEN 713450, SIOMO 945915, and OPTIMA 730149, in part by the Spanish State Research Agency underGrants PGC2018-094490-BC21 and ICTS-2017-28-UPV-9, and in part by Generalitat Valenciana under Grants BEST/2020/178, PROMETEO/2019/123, IDIFEDER/2020/041, and IDIFEDER/2021/061.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Las voces del interior rural valenciano: recursos naturales y resistencias al desarrollo, Voices from the Valencian rural interior: natural resources and development resistance

  • Calvo Palomares, Ricard
  • Sigalat-Signes, Enric
  • Roig-Merino, Bernat|||0000-0002-1437-7752
  • Buitrago Vera, Juan Manuel|||0000-0003-1681-1310
[EN] This paper shows the results of two territorial diagnoses for employment and local development carried out in two rural regions of the province of Valencia. These diagnostics showed that these territories have abundant natural resources, but that lack of competent actors to dynamize them properly; either because they lack the means to do so (access to sources of financing, transport or basic infrastructure), or because they are not trained for it (aging population with lack of training), or because they do not have enough initiative (installed in a comfort zone)., [ES] En este trabajo se muestran los resultados de los diagnósticos territoriales para el empleo y el desarrollo local realizados en dos comarcas rurales de la provincia de València. Diagnósticos que pusieron de manifiesto que se trata de territorios que cuentan con abundantes recursos naturales, pero que adolecen de actores suficientemente competentes para dinamizarlos de la manera más adecuada. Bien porque carecen de los medios para ello (acceso a fuentes de financiación, transportes o infraestructuras básicas), porque no están capacitados para ello (población envejecida con carencias de formación), o porque no tienen la iniciativa suficiente (instalados en una zona de confort)., Este artículo se ha elaborado gracias a los resultados de dos proyectos de investigación, en la introducción aquellos procedentes de la investigación La necesidad de aprender de la crisis. Un estudio de casos de éxito en desarrollo local (Proyecto emergente de carácter competitivo GV/2015/41 financiado por la Generalitat Valenciana-Conselleria d Educació, Cultura i Esport), desarrollado durante los años 2015 y 2016. Y para el desarrollo del mismo de los procedentes del Convenio firmado entre la Universitat de València y el Servicio Valenciano para el Empleo y la Formación (SERVEF, actualmente LABORA), titulado Fomento, Investigación e Innovación de las Políticas de Empleo desde la perspectiva del Desarrollo Territorial en el marco del Plan AVALEM TERRITORI , desarrollado entre 2017 2018. Agradecemos especialmente los mapas facilitados desde el Vicerrectorado de Proyección Territorial y Sociedad de la Universitat de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Plasma-Induced Surface Modification of Sapphire and Its Influence on Graphene Grown by Plasma-Enhanced Chemical Vapour Deposition

  • Sinusia-Lozano, Miguel|||0000-0002-1744-4148
  • Ivanova-Angelova, Todora|||0000-0002-8150-4133
  • Díaz-Fernández, Francisco J.|||0000-0002-4247-2589
  • Kovylina-Zabyako, Miroslavna
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Pinilla-Cienfuegos, Elena|||0000-0002-3734-0821
  • Gómez-Hernández, Víctor Jesús|||0000-0003-2364-8814
  • Bernat-Montoya, Ignacio
  • Boscá Mojena, Alberto
[EN] In this work, we study the influence of the different surface terminations of c-plane sapphire substrates on the synthesis of graphene via plasma-enhanced chemical vapor deposition. The different terminations of the sapphire surface are controlled by a plasma process. A design of experiments procedure was carried out to evaluate the major effects governing the plasma process of four different parameters: i.e., discharge power, time, pressure and gas employed. In the characterization of the substrate, two sapphire surface terminations were identified and characterized by means of contact angle measurements, being a hydrophilic (hydrophobic) surface and the fingerprint of an Al- (OH-) terminated surface, respectively. The defects within the synthesized graphene were analyzed by Raman spectroscopy. Notably, we found that the ID/IG ratio decreases for graphene grown on OH-terminated surfaces. Furthermore, two different regimes related to the nature of graphene defects were identified and, depending on the sapphire terminated surface, are bound either to vacancy or boundary-like defects. Finally, studying the density of defects and the crystallite area, as well as their relationship with the sapphire surface termination, paves the way for increasing the crystallinity of the synthesized graphene., M.S.L. acknowledges financial support from the Generalitat Valenciana (Project: CIAPOS/2021/293). V.J.G. acknowledges financial support from the Generalitat Valenciana (CDEIGENT/ 2020/009). E.P.C. acknowledges financial support from the Generalitat Valenciana (SEJIGENT/2021/ 039). All authors acknowledge financial support from AGENCIA ESTATAL DE INVESTIGACIÓN of Ministerio de Ciencia e Innovacion (PID2020-118855RB-I00 and PID2021-128442NA-I00) and to the European Regional Development Fund (ERDF) (IDIFEDER/2020/041, IDIFEDER/2021/061). This study formed part of the Advanced Materials program and was supported by Ministerio de Ciencia e Innovacion (MCIN) with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (MFA/2022/025).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancing proton transport in cross-linked poly(vinyl alcohol)/sulfosuccinic acid membranes by adding TEMPO-oxidized lignocellulose nanofibrils

  • Albornoz-Palma, Gregory Piero Horacio|||0000-0002-1194-976X
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • Henríquez‑Gallegos, Sergio
  • Pereira, Miguel
[EN] The membranes based on poly(vinyl alcohol) (PVA) and sulfosuccinic acid (SSA) are an interesting alternative for use in proton exchange membrane fuel cells (PEMFC), due to their low cost. Nevertheless, it is necessary to enhance their electrochemical performance for their use. This research aims to understand the effect of the addition of TOLCNFs with different lignin content on the physicochemical properties of PVA/SSA-based membranes, proton transport, and their performance as electrolytes in a laboratory PEMFC. For this, TEMPO-oxidized lignocellulose nanofibrils (TOLCNFs) were produced from Pinus radiata pulp that was delignified using oxidative treatments. TOLCNFs with a lignin content of 29.7% (TOLCNF-0), 21.8% (TOLCNF-0.75), 16.9% (TOLCNF-2), and 9.7% (TOLCNF-5) were obtained by varying oxidative treatment times. Membranes of PVA, SSA, and 5% (w/w) TOLCNF were prepared. The addition of TOLCNF changed the structure of the PVA/SSA membrane, promoting cross-linking between the fibrils. Furthermore, they increased the water absorption capacity (W) and decreased the swelling (S). The proton transport by diffusion through the membranes was hindered by the addition of the TOLCNFs. Despite that, the TOLCNFs promoted proton conductivity through the membranes, due to the increase in their water absorption capacity, hydrophilicity, cross-linking, and W/S ratio. Notably, the PVA/SSA/TOLCNF-0 and PVA/SSA/TOLCNF-2 membranes exhibited the highest proton conductivity over the entire temperature range studied (40-110 degrees C). Finally, the incorporation of the TOLCNFs improved the performance of the PVA/SSA membrane as an electrolyte in a laboratory PEMFC, with the TOLCNF-0 proving to be the best filler for the PVA/SSA membrane., The experimental activities carried out at the Universitat Politècnica de València have been funded by the Spanish Ministry of Science and Innovation with funding from European Union NextGeneration EU (PRTR-C17.11) and by Generalitat Valenciana (MFA/2022/041). The experimental activities carried out at the Universidad de Concepción have been funded by the Agencia Nacional de Investigación y Desarrollo (ANID) under Grant no. FB210015 (CENAMAD).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Oxetane ring enlargement through nucleophilic trapping of radical cations by acetonitrile

  • Pérez-Ruiz, Raúl|||0000-0003-1136-3598
  • Jiménez, M Consuelo|||0000-0002-8057-4316
  • Miranda Alonso, Miguel Ángel
  • Sáez Cases, José Antonio
  • Domingo, Luis R.
Oxidative electron transfer cycloreversion of trans,trans-2-cyclopropyl-4-methyl-3-phenyloxetane, using triphenylthiapyrylium perchlorate as a photosensitizer, leads to distonic 1,4-radical cations; subsequent cleavage gives rise to fragmentation products (pathway a), whereas nucleophilic trapping by acetonitrile affords a ring expanded oxazine (pathway b)., Financial support by the MICINN (Grants CTQ-2010-14882, CTQ-2009-13699 and JCI-2010-06204), from CSIC (JAEDOC 101-2011) and from Generalitat Valenciana (Grant No.GV/2012/041-20120205) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of Mo content on the properties of graphite MoC composites sintered by spark plasma sintering

  • Suárez, Marta
  • Fernández-González, Daniel
  • Díaz, Luís Antonio
  • Piñuela-Noval, Juan
  • Moya, José Serafin
  • Torrecillas, Ramón
  • Fernández, Adolfo
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
[EN] Graphite-molybdenum-titanium powders prepared by colloidal processing technique were sintered by Spark Plasma Sintering (SPS). This material is proposed in this manuscript due to its potential interest as heat sink. The influence of the molybdenum content (2.5, 5.0 and 10.0 vol.%) on the thermal, electrical, and mechanical properties of the composite are studied to define the composite with the best properties. Thermal, electrical, and mechanical properties of the composite graphite¿10 vol.% Mo¿1 vol.% Ti (that are composites of graphite with molybdenum and titanium carbides after sintering) are significantly better than those ofthe composites with lower molybdenum contents (2.5 vol.% and 5 vol.%). This way, flexural strength, electrical conductivity, and thermal conductivity are 1.5, 7.8 and 18 times greater, respectively, than in the composite graphite¿2.5 vol.% Mo¿1 vol.% Ti. In the case of comparing with the composite graphite¿5 vol.% Mo¿1 vol.% Ti, flexural strength, electrical conductivity, and thermal conductivity are 1.2, 5.1 and 3.2 greater in the composite graphite¿10 vol.% Mo¿1 vol.% Ti, respectively., This research was funded by the Spanish Ministry of Science and Innovation. Call Programa Estatal de I+D+i Orientada a los Retos de la Sociedad (RTI2018-102269-BI00). Daniel Fernández-González acknowledges the grant (Juan de la Cierva-Formación program) FJC2019-041139-I funded by MCIN/AEI/ 10.13039/501100011033 (Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación). Amparo Borrell acknowledges for her RYC-2016-20915. Juan Pinuela Noval acknowledges the Programa Severo Ochoa of Grants for Research and Teaching of the Principality of Asturias for the funds received for the elaboration of the Ph.D. Thesis (Ref: BP20 041).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of the dissolution time into an acid hydrolytic solvent to taylor electrospun nanofibrous polycaprolactone scaffolds

  • Gil-Castell, O.
  • Badia, J.D.
  • Strömberg, E.
  • Karlsson, S.
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] The hydrolysis of the polycaprolactone (PCL) as a function of the dissolution time in a formic/acetic acid mixture was considered as a method for tailoring the morphology of nanofibrous PCL scaffolds. Hence the aim of this research was to establish a correlation between the dissolution time of the polymer in the acid solvent with the physicochemical properties of the electrospun nanofibrous scaffolds and their further service life behaviour. The physico-chemical properties of the scaffolds were assessed in terms of fibre morphology molar mass and thermal behaviour. A reduction of the molar mass and the lamellar thickness as well as an increase of the crystallinity degree were observed as a function of dissolution time. Bead-free fibres were found after 24 and 48 h of dissolution time with similar diameter distributions. The decrease of the fibre diameter distributions along with the apparition of beads was especially significant for scaffolds prepared after 72 h and 120 h of dissolution time in the acid mixture. The service life of the obtained devices was evaluated by means of in vitro validation under abiotic physiological conditions. All the scaffolds maintained the nanofibrous structure after 100 days of immersion in water and PBS. The molar mass was barely affected and the crystallinity degree and the lamellar thickness increased along immersion preventing scaffolds from degradation. Scaffolds prepared after 24 h and 48 h kept their fibre diameters whereas those prepared after 72 h and 120 h showed a significant reduction. This PCL tailoring procedure to obtain scaffolds that maintain the nanoscaled structure after such long in vitro evaluation will bring new opportunities in the design of long-term biomedical patches. (C) 2016 Elsevier Ltd. All rights reserved., The European Regional Development Funds and the Spanish Ministry of Economy and Competitiveness are acknowledged for the projects POLYCELL (ENE2014-53734-C2-1-R) and UPOV13-3E-1947. The Spanish Ministry of Education, Culture and Sports is thanked for the pre-doctoral FPU grant of O. Gil-Castell (FPU13/01916) and the scholarship for a research stage of 0. Gil-Castell in Kungliga Tekniska Hogskolan (KTH). Generalitat Valenciana is thanked for the APOSTD/2014/041 for J.D. Badia. Universitat de Valencia (UV) and HS LaFe are acknowledged for the DERMASAFE project. The financial support given by the ICTH Royal Institute of Technology and the Universitat Politecnica de Valencia (UPV) are gratefully acknowledged. IESMAT S.A. and Malvern Instruments Ltd are recognised for their grateful collaboration.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thermal kinetics for the energy valorisation of polylactide/sisal biocomposites

  • Moliner, C.
  • Badia, J.D.
  • Bosio, B.
  • Arato, E.
  • Kittikorn, T.
  • Stromberg, E.
  • Ek, M.
  • Karlsson, S.
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] The thermal stability and decomposition kinetics of PLA/sisal biocomposites was discussed to evaluate the suitability of their use in energy recovery processes such as pyrolysis and combustion. The influence of the addition of sisal up to 30%wt, the presence of coupling agent, and the atmosphere of operation, i.e. inert or oxidative was discussed by means of multi-rate linear non-isothermal thermogravimetric experiments. All biocomposites showed a mean high heating value of 15 MJ/kg indicating their suitability for energy recovery processes. The thermal requirements of PLA/sisal decomposition were assessed in terms of onset decomposition temperature and apparent activation energy. A minimum of 240 degrees C and 174 kJ mol(-1) in inert environment and 225 degrees C and 190 kJ mol(-1) in oxidative environment ensured the feasibility of the reactions regardless the composition of the PLA/sisal biocomposites. The atmosphere of work lead to a greater amount of residue in case of pyrolysis reactions that would need further treatment whereas an oxidative atmosphere resulted in nearly zero final waste stream. The similar kinetics obtained for all samples regardless the amount of sisal or use of coupling agent eases the operability of energy facilities aimed of turning these biowastes into new fuels., The Spanish Ministry of Economy and Competitiveness and European Regional Development Funds are acknowledged for the projects ENE2014-53734-C2-1-R, ENE2017-86711-C3-1-R (UPOV13-3E-1947). Generalitat Valenciana is thanked for the APOSTD/2014/041 for J.D. Badia. The financial support given by the Prince of Songkla University and KTH Royal Institute of Technology is gratefully acknowledged. Rossella Acerbo and Emanuele Righi are gratefully acknowledged for their activity in the framework of their Bachelor Theses.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dielectric characterisation of chitosan-based composite membranes containing fractionated kraft and organosolv lignin

  • Wolf, Mark Henning|||0000-0003-3033-6616
  • B. Pascual-Jose|||0000-0001-7562-916X
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • Izaguirre, Nagore
  • Labidi, J.
[EN] Chitosan-based composite membranes with fractionated kraft and organosolv lignin were prepared by solvent casting. A small lignin fraction (1%) was added to the neat chitosan to obtain a good distribution. The influence of lignin extraction with ethyl acetate and consequently ethanol on the dielectric and conductive properties of the composites was investigated by dielectric thermal analysis (DETA). Overall, the chitosan-lignin composites exhibit three relaxation mechanisms (ß, ßwet, and ¿) and two conductivity phenomena (¿ and MWS). FTIR analysis showed that the composites with organosolv lignin fractions have fewer hydroxyl groups than those with kraft lignin, which decreases slightly further for both after ethanol extraction. The lignin fractions with lower molecular weight and higher OH content show stronger interactions with chitosan, due to hydrogen bonding. These interactions affect the thermal activation and cooperativity of the ß-, ßwet, and ¿-relaxation. Furthermore, the kraft lignin fractions with many polar groups are very compatible with the chitosan matrix, resulting in a more compact structure and higher fragility. The membranes CS OLEA and CS KLE have a lower electron conductivity and a higher proton conductivity. Thus, they have promising conductivity properties for fuel cell applications., This study forms part of the Advanced Materials programme and was supported by the Spanish Ministry of Science and Innovation with funding from the European Union NextGenerationEU (PRTR-C17.11) and by the Generalitat Valenciana as project INNOMAT-H2 (MFA/2022/041). The authors also thank the Spanish Ministry of Universities for the pre-doctoral FPU grant of M.H. Wolf (FPU21/00853), the Basque Government for the grant of N. Izaguirre (PIF19-183) and the Universitat Polit`ecnica de Val`encia for the PAID-10-19 SUB.1 grant of R.Teruel-Juanes (SP20190049). The authors are also grateful to Karel Beirnaert for experimental assistance in material characterisation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tailored electrospun nanofibrous polycaprolactone/gelatin scaffolds into an acid hydrolytic solvent system

  • Gil-Castell, O.
  • Badia, J.D.
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] Blended nanofibrous scaffolds based on polycaprolactone (PCL) and gelatin (Ge) were successfully prepared. A formic/acetic acid (1:1) mixture was used to dissolve PCL/Ge blends from 100/0 to 20/80 %wt in steps of 10 %wt. The hydrolysis of the PCL diluted in the formic/acetic acid mixture was considered as a method for tailoring the surface morphology and physicochemical features of the nanofibrous PCL/Ge scaffolds as a function of the dissolution time. The fibre diameter remained in the nanoscale range for all the studied scaffolds, which is crucial to mimic the extra-cellular matrix size. The reduction of the intrinsic viscosity, molar mass and hydrodynamic radius found for the PCL molecules as a function of the dissolution time, consequently diminished the entanglement capability of the polymeric chains. Subsequently, the fibre diameter decreased as dissolution time increased, for all the studied compositions. While the crystallinity of the scaffolds with high PCL content increased as a function of the dissolution time, the scaffolds with high percentage of Ge showed the lowest crystallinity degree, which was ascribed to the hindering effect of the Ge diffused among the PCL segments. The wettability increased as a function of the Ge content due to the high hydrophilic behaviour of these molecules. It also increased as a function of the dissolution time, due to the more hydroxyl groups available in PCL segments to interact with water molecules. As a whole, the physicochemical assessment of the electrospun scaffolds revealed an effective tailoring procedure to obtain functionalised PCL/Ge scaffolds with specific properties as a function of the dissolution time before electrospinning., The Spanish Ministry of Economy and Competitiveness is acknowledged for the projects POLYCELL (ENE2014-53734-C2-1-R), POLYDECARBOCELL (ENE2017-86711-C3-1-R) and UPOV13-3E-1947. The Spanish Ministry of Education, Culture and Sports is thanked for the pre-doctoral FPU grant of O. Gil-Castell (FPU13/01916). Generalitat Valenciana is thanked for the APOSTD/2014/041 for J.D. Badia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Litterfall, litter decomposition and associated nutrient fluxes in Pinus halepensis: influence of tree removal intensity in a Mediterranean forest

  • Lado Monserrat, Luis
  • Lidón, Antonio
  • Bautista, Inmaculada
[EN] Our knowledge about the influence of silvicultural treatments on nutrient cycling processes in Mediterranean forests is still limited. Four levels of tree removal were compared in an Aleppo pine forest in eastern Spain to determine the effects on litterfall, litter decomposition and the associated nutrient fluxes after 12 years. Removal treatments included clearfelling, two shelterwood intensities (60 and 75 % of basal area removed) and untreated controls. Twelve years later, the basal area removed still explained 60 % of litterfall mass variance and 60 % of C, 52 % of N, 45 % of P, 17 % of K, 47 % of Ca and 60 % of Mg return variances. Litter decomposed somewhat more slowly in clearfellings compared to controls (p = 0.049), accumulated more Ca and released less K compared to the other three treatments. This was explained by contamination with mineral particles due to the poorly developed O horizon in clearfellings. We conclude that the management practices reduced the nutrient return via litterfall, but the nutrient release through decomposition seems poorly sensitive to canopy disturbance. In order to accurately quantify the harvesting impacts on nutrient cycling in this Mediterranean forest system, it is necessary to measure the litterfall of the understory layer., This work has been supported by a fellowship from the Generalitat Valenciana, Conselleria de Educacion, Formacion y Empleo awarded to L. Lado-Monserrat (BFPI/2008/041). Silvicultural treatments were carried out by the Mediterranean Centre for Environmental Studies (CEAM) through programme "I + D en relacion con la restauracion de la cubierta vegetal y otros aspectos de investigacion forestal". Dataloggers and probes were provided by the Generalitat Valenciana through Project "Efecto de diferentes sistemas de aclareo de masa forestal sobre la disponibilidad de agua, nutrientes y la regeneracion de la masa arborea y arbustiva en parcelas de pinar" (GV06/126). We acknowledge Joana Oliver, Ruth M. Tavera and Daniel Fortanet for their help in the laboratory and in the field. The authors wish to thank Francisco Galiana for his assistance, including help in fieldwork and providing information about the experimental design of the silvicultural treatments. Thanks also go to Rafael Herrera from the Centro de Ecologia, Instituto Venezolano de Investigaciones Cientificas, Caracas, Venezuela and two anonymous reviewers for critically reviewing the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Exotic nanophotonics with subwavelength high-index disks

  • Díaz-Escobar, Evelyn
  • Pinilla-Cienfuegos, Elena|||0000-0002-3734-0821
  • Mercadé, Laura|||0000-0002-4994-7727
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Barreda, Ángela I.
[EN] High-index dielectric disks with subwavelength dimensions seem relatively simple electromagnetic structures. However, they can give rise to exotic phenomena in nanophotonics. Here we show recent findings that show that high-index disks can be used to manipulate light in subwavelength dimensions as a result of Mie and Fabry-Perot resonances. We also propose that such disks can be used for new applications in photonic integrated circuits (PICs) using silicon technology., A. M. acknowledges funding from Generalitat Valenciana (BEST/2020/178, IDIFEDER/2018/033, PPC/2018/002, PROMETEO/2019/123, IDIFEDER/2020/041); Ministerio de Ciencia e Innovación (PGC2018-094490-B-C21, ICTS-2017- 28-UPV-9); European Commission, H2020 Future and Emerging Technologies (713450, 829067).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Understanding the effect of lignin on the production process and characteristics of lignocellulose nanofibrils from Eucalyptus nitens

  • Albornoz-Palma, Gregory Piero Horacio|||0000-0002-1194-976X
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • Ortega-Sanhueza, Isidora
  • Henríquez-Gallegos, Sergio
  • Pereira, Miguel
[EN] Cellulose, hemicellulose, and lignin are the main constituents of lignocellulose nanofibrils (LCNFs). The content and modification of lignin in the pulps affect the production process and characteristics of LCNFs, showing changes in their morphology, surface, rheological, and dielectric behaviors. Due to controversy and relevance in applications, these changes still need to be explained. This work seeks to understand the effect of lignin content and its oxidation on the production process and the characteristics of LCNFs. It was possible to produce pulps with fibers of similar physical characteristics and carbohydrate content after delignification, allowing the identification of the isolated effects of in situ lignin. A lower amount of lignin facilitated the LCNF production process, generating fibrils with smaller widths (up to similar to 48%) but more considerable apparent lengths (up to similar to 73%). In addition, the viscosity of the suspensions increased for LCNFs with lower lignin content (up to similar to 3.5 times to 0.5% (w/v)), due to increased flexibility, specific surface area, and surface charge of the fibrils. Finally, the LCNFs showed four dipolar relaxations, where the glass transition temperature of lignin decreased with oxidation and increased with increasing condensed structures and decreasing S/G ratio., This work was funded by the Agencia Nacional de Investigacion y Desarrollo (ANID)/Doctorado Nacional/2018-21181080, and projects FONDECYT N degrees 1201042, CORFO Grant no. 13CEI2-21839, and INNOMAT-H2 (MFA/2022/041) (Conselleria d'Innovacio, Universitats, Ciencia i Societat Digital).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

TOR complex 1 regulates the yeast plasma membrane proton pump and pH and potassium homeostasis

  • Mahmoud, Shima
  • Cabedo López, Marc
  • Trujillo, Cristina
  • Rienzo, Alessandro
  • Caballero Molada, Marcos
  • Sharma, Sukesh Chander
  • Montesinos De Lago, Consuelo
  • Planes Ferrer, Mª Dolores|||0000-0002-5347-8660
  • Mulet, José Miguel|||0000-0002-9087-3838
  • Serrano Salom, Ramón
[EN] We have identified in yeast a connection between two master regulators of cell growth: a biochemical connection involving the TORC1 protein kinase (which activates protein synthesis, nutrient uptake, and anabolism) and a biophysical connection involving the plasma membrane proton-pumping H+ -ATPase Pma1 (which drives nutrient and K+ uptake and regulates pH homeostasis). Raising the temperature to nonpermissive values in a TOR thermosensitive mutant decreases Pma1 activity. Rapamycin, a TORC1 inhibitor, inhibits Pma1 dependent on its receptor Fpr1 and on the protein phosphatase Sit4, a TORC1 effector. Mutation of either Sit4 or Tco89, a nonessential subunit of TORC1, decreases proton efflux, K+ uptake, intracellular pH, cell growth, and tolerance to weak organic acids. Tco89 does not affect Pma1 activity but activates K+ transport., We thank Prof. Michael N. Hall (Basel) for strains SH100 and SH221, and Prof. Joaquin Arino (Barcelona) for strain BY4741 and its null mutant derivatives fpr1 Delta 0, sit4 Delta 0, and tco89 Delta 0. We also thank Prof. Francisco Portillo (Madrid) for the antibody against the double phosphorylation of Ser911 Thr912 in Pma1. This work was funded by grant PROME-TEOII/2014/041 from Generalitat Valenciana (Valencia, Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

In vitro digestion of salmon: Influence of processing and intestinal conditions on macronutrients digestibility

  • Asensio-Grau, Andrea
  • Calvo-Lerma, Joaquim
  • Heredia Gutiérrez, Ana Belén|||0000-0001-6629-9779
  • Andrés Grau, Ana María|||0000-0002-6132-3167
[EN] Salmon is the main dietary source of omega-3 lipids and contains high-biological value protein. However, processing techniques could affect macronutrient digestibility. Also, altered intestinal conditions, particularly given in pancreatic insufficiency, could threaten digestibility. This study tested both hypotheses by subjecting raw, marinated and microwave-cooked salmon to static in vitro digestion under healthy (pH 7, bile concentration 10 mM) and altered (pH 6, bile 1 or 10 mM) intestinal conditions with different pancreatin concentrations. In the standard conditions, proteolysis was not affected by processing, but lipolysis decreased in marinated (46%) and raw salmon (57%) compared to the cooked matrix (67%). In altered conditions, proteolysis and lipolysis decreased to different extents depending on the treatment. Overall, processing affected proteolysis the most (f-ratio = 5.86), while intestinal conditions were the major determinants of lipolysis (f-ratio = 58.01). This study could set the ground to establish dietary recommendations of salmon for specific population groups., The authors would like to thank the Conselleria de Educacio i Investigacio de la Generalitat Valenciana and also the European Union ("El Fondo Social Europeo (FSE) invierte en tu futuro") for the PhD scholarship given to Andrea Asensio Grau (ACIF/2017/008). This study was developed thanks to the equipment funded with the support from the Generalitat Valenciana IDIFEDER/2018/041 (PO FEDER Comunitat Valenciana 2014-2020).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Virtual Object-Location Task for Children: Gender and Videogame Experience Influence Navigation, Age Impacts Memory and Completion Time

  • Rodríguez-Andrés, D.
  • Mendez-Lopez, M.
  • Perez-Hernandez, E.
  • Juan, M. Carmen|||0000-0002-8764-1470
[EN] The use of virtual reality-based tasks for studying memory has increased considerably. Most of the studies that have looked at child population factors that influence performance on such tasks have been focused on cognitive variables. However, Little attention has been paid to the impact of non-cognitive skills. In the present paper, we tested 52 typically-developing children aged 5¿12 years in a virtual object-location task. The task assessed their spatial short-term memory for the location of three objects in a virtual city. The virtual task environment was presented using a 3D application consisting of a 12000 stereoscopic screen and a gamepad interface. Measures of learning and displacement indicators in the virtual environment, 3D perception, satisfaction, and usability were obtained. We assessed the children¿s videogame experience, their visuospatial span, their ability to build blocks, and emotional and behavioral outcomes. The results indicate that learning improved with age. Significant effects on the speed of navigation were found favoring boys and those more experienced with videogames. Visuospatial skills correlated mainly with ability to recall object positions, but the correlation was weak. Longer paths were related with higher scores of withdrawal behavior, attention problems, and a lower visuospatial span. Aggressiveness and experience with the device used for interaction were related with faster navigation. However, the correlations indicated only weak associations among these variables., This work was funded mainly by the Spanish Ministry of Economy, Industry and Competitiveness (MINECO) through the CHILDMNEMOS project (TIN2012-37381-C02-01) and co-financed by the European Regional Development Fund (FEDER). Other financial support was received from the Generalitat Valenciana (Conselleria d Educació, Investigació, Cultura i Esport) through the grant for consolidable research groups (AICO/2017/041), the Gobierno de Aragón (Departamento de Innovación, Investigación y Universidad), and the FEDER Construyendo Europa desde Aragón .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

In Vitro Simulation of Human Colonic Fermentation:A Practical Approach towards Models¿ Design and Analytical Tools

  • Veintimilla-Gozalbo, Elena
  • Asensio-Grau, Andrea
  • Calvo-Lerma, Joaquim
  • Heredia Gutiérrez, Ana Belén|||0000-0001-6629-9779
  • Andrés Grau, Ana María|||0000-0002-6132-3167
[EN] The human colonic microbiota plays an important role in the food digestion process and has a key role in maintaining health status. This community of microbes is inter-individually different due to several factors that modulate its composition. Among them, diet is one of the most relevant, which, in turn, is affected by environmental, economic, and cultural considerations. These pieces of evidence have promoted the study of the influence of diet on gut microbiota and the development of in vitro models that simulate the colonic digestion of foods. This narrative review aims to present a technical approach of the in vitro gut models available to evaluate the impact of diet on human colonic microbiota. A description and comments on the main characteristics, parameters, applicability, faecal inoculum preparation, and analytical tools are made. Despite the progress of in vitro colonic digestion models and metaomic applicability in this research field, there are still some challenges to face due to the lack of a consensus on the methodologies to conduct in vitro colonic digestions and the need to integrate the metaomic data to fully understand the influence of food in human colonic microbiota., The authors would like to thank the Conselleria de Educacio i Investigacio de la Generalitat Valenciana and also the European Union ("El Fondo Social Europeo (FSE) invierte en tu futuro") for the PhD scholarship given to Andrea Asensio Grau (ACIF/2017/008) and for the post-doctoral grant given to Joaquim Calvo-Lerma (Grant number APOSTD 2019-102).This study was developed thanks to the equipment funded with the support from the Generalitat Valenciana IDIFEDER/2018/041 (PO FEDER Comunitat Valenciana 2014-2020).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A fungal transcription factor gene is expressed in plants from its own promoter and improves drought tolerance

  • Martínez Macías, Félix
  • Arif, Anjuman
  • Ali, Rashid
  • Montesinos De Lago, Consuelo
  • Brunaud, Veronique
  • Muñoz Bertomeu, Jesús
  • Nebauer, Sergio G.|||0000-0001-7978-6680
  • Bueso Rodenas, Eduardo|||0000-0002-0828-121X
  • Serrano Salom, Ramón
[EN] A fungal gene encoding a transcription factor is expressed from its own promoter in Arabidopsis phloem and improves drought tolerance by reducing transpiration and increasing osmotic potential. Horizontal gene transfer from unrelated organisms has occurred in the course of plant evolution, suggesting that some foreign genes may be useful to plants. The CtHSR1 gene, previously isolated from the halophytic yeast Candida tropicalis, encodes a heat-shock transcription factor-related protein. CtHSR1, with expression driven by its own promoter or by the Arabidopsis UBQ10 promoter, was introduced into the model plant Arabidopsis thaliana by Agrobacterium tumefaciens-mediated transformation and the resulting transgenic plants were more tolerant to drought than controls. Fusions of the CtHSR1 promoter with beta-glucuronidase reporter gene indicated that this fungal promoter drives expression to phloem tissues. A chimera of CtHSR1 and green fluorescence protein is localized at the cell nucleus. The physiological mechanism of drought tolerance in transgenic plants is based on reduced transpiration (which correlates with decreased opening of stomata and increased levels of jasmonic acid) and increased osmotic potential (which correlates with increased proline accumulation). Transcriptomic analysis indicates that the CtHSR1 transgenic plants overexpressed a hundred of genes, including many relevant to stress defense such as LOX4 (involved in jasmonic acid synthesis) and P5CS1 (involved in proline biosynthesis). The promoters of the induced genes were enriched in upstream activating sequences for water stress induction. These results demonstrate that genes from unrelated organisms can have functional expression in plants from its own promoter and expand the possibilities of useful transgenes for plant biotechnology., We acknowledge support by Grants BFU2011-22526 of the Spanish MICINN (Madrid, Spain) and PROMETEO II 2014-041 of Generalitat Valenciana (Valencia, Spain). J. M.-B. was supported by a Juan de la Cierva contract of the Spanish MICINN. A. A. was supported by a short-term EMBO fellowship to visit the laboratory of R. Serrano. We thank Dr. Jose Maria Belles (IBMCP, Valencia, Spain) for assistance in the determination of sugars, Dr. Isabel Lopez-Diaz and Dr. Esther Carrera for the hormone analysis carried out at the Plant Hormone Quantification Service of IBMCP and Prof. Jorg Kudla (Westfalische Wilhelms-Universitat, Munster, Germany) for the pGPTVII.Hyg.P<INF>UBQ10</INF>::MCS plasmid.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Role of extract purification in iron complexation and photo-Fenton reactivity under mild pH conditions

  • Arévalo-Aguado, Jordi|||0000-0002-0669-0933
  • Mattarello, Gaia
  • Amat Payá, Ana María|||0000-0003-4218-2685
  • Arqués Sanz, Antonio|||0000-0001-8692-6979
  • Santos-Juanes Jordá, Lucas|||0000-0001-5539-8341
  • Cerdan, M.
[EN] Photo-Fenton processes operated at circumneutral pH require iron-complexing agents able to maintain Fe(III) solubility while sustaining efficient Fe(III)/Fe(II) cycling. In this work, polyphenol-rich extracts obtained from grape-processing residues were evaluated as natural ligands for photo-Fenton degradation of a mixture of six emerging contaminants (30 mg L-1 total) at pH 5-7 using 5 mg L-1 Fe(III). Raw alkaline extracts and membrane-refined fractions (300 and 150 kDa) were comprehensively characterized (TOC, COD, AOS, DLS, TPC, flavonoids and EEM fluorescence) and correlated with iron stability and degradation performance through a Doehlert multivariate design. Membrane fractionation significantly modified extract functionality. The 300 kDa retentate exhibited the highest phenolic and flavonoid densities (0.181 and 0.175 mg mg C-1, respectively) and maintained soluble iron at pH 7 with minimal losses over 60 min. Under optimized conditions (pH 6, 16 mg C L-1, stoichiometric H2O2), this fraction achieved 80% pollutant removal in 60 min, approaching the performance of EDTA and NTA when compared at equivalent carbon loads. In contrast, the raw extract was penalized by nonfunctional organic matter, while the 150 kDa fraction showed reduced chelating efficiency due to lower coordination-site density. The novelty of this work lies in establishing a direct correlation between membrane-driven compositional tuning (AOS and fluorescence signatures), iron stability, and photo-Fenton efficiency, demonstrating that functional group density rather than total organic carbon governs performance. These results highlight the potential of agro-residue-derived polyphenolic extracts as sustainable iron-complexing agents for photo-Fenton processes at mild pH., The authors want to acknowledge the financial support of the European Union's Horizon Europe research and innovation program under GA No 101131420 (Project PHENOCYCLES) , IN2AQUAS Project (n degrees 101119555) , financed by European Union HORIZON/MSCA, AGROALNEXT/2022/041 Project, funded by European Union NextGenerationEU (PRTR-C17) with the support of Ministerio de Ciencia e Innovacion-Spanish Government and Generalitat Valenciana and the Research Structures of the UPV with the FPI PREDOC UPV Program (Subprogram 2. Code: 20250665)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced Conductivity of Chitosan Composite Membranes With Fractionated Kraft and Organosolv Lignin

  • Wolf, Mark Henning|||0000-0003-3033-6616
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • Izaguirre, Nagore
  • Labidi, Jalel
[EN] Different bio-based chitosan composites containing kraft or organosolv lignin were subjected to successive solvent extractions (ethyl acetate followed by ethanol) and then modified by immersion in a sulfuric acid solution to obtain membranes with suitable conductive properties. The materials were characterized by Fourier-transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), oxidative-stability testing, water-uptake measurements, electron and proton conductivity, and H₂/O₂ fuel-cell performance, enabling correlations between composite structure and properties. Sulfuric-acid treatment introduced sulfate groups that promote ionic interactions between polymer chains, improving resistance to radical oxidative degradation. The dry modified biocomposites exhibited very low electronic conductivity (10⁻¹⁴–10⁻¹⁰ S·cm⁻¹) over the −10 to 60 °C range, indicating potential as electrical insulators. Acid modification also disrupted crystallinity and increased hydrophilicity, leading to higher water uptake. Consequently, proton transport was enhanced, resulting in increased proton conductivity and higher power output in an H₂/O₂ fuel cell. Composites containing organosolv lignin fractions showed stronger affinity for sulfate groups and, accordingly, higher oxidative stability, greater water uptake, and improved proton conductivity compared with kraft-lignin-based composites., This work was supported by Ministerio de Ciencia, Innovación y Universidades, PRTR- C17.11. Conselleria d'Educació, Investigació, Cultura iEsport, MFA/2022/041. Ministerio de Ciencia, Innovación y Universidades, FPU21/00853. Eusko Jaurlaritza, PIF19-183
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of lignin on the morphological, rheological, and dielectric characteristics of lignocellulose nanofibrils from Pinus radiata

  • Albornoz-Palma, Gregory Piero Horacio|||0000-0002-1194-976X
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • Ortega-Sanhueza, Isidora
  • Henríquez-Gallegos, Sergio
  • Pereira, Miguel
[EN] Lignocellulose nanofibrils (LCNFs) are a nanomaterial composed mainly of cellulose, hemicellulose, and lignin. The lignin and its chemical modification in fibrils affect the production process and the morphological and surface characteristics of the LCNFs. These differences in the LCNFs produce different rheological and dielectric properties, which are key to the potential uses of the nanomaterial. This work aims to understand the effect of lignin on the production process and characteristics of LCNFs. A smaller amount of lignin favored the nanofibril production process, producing fibrils with smaller widths and the same apparent length distribution (15 passes). Regarding the rheology of LCNFs, native lignin in the fibrils produced a minor resistance to flow. On the other hand, oxidized lignin had stronger and hydrated flocs of larger size due to higher specific surface area or surface charge of fibrils. Finally, the dielectric properties of LCNFs decreased with increasing crosslinking structures and increased with increasing polar groups., This work was funded by the Agencia Nacional de Investigación y Desarrollo (ANID)/Doctorado Nacional/2018-21181080, and projects FONDECYT N◦1201042, CORFO Grant no. 13CEI2-21839 and INNO-MAT-H2 (MFA/2022/041) (Conselleria d Innovacio,Universitats, Ciencia i Societat Digital).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development and validation of a reduced-order control-oriented model for hydrogen proton-exchange membrane fuel cells

  • Piqueras, P.|||0000-0002-3767-0839
  • De La Morena, Joaquín|||0000-0003-0208-508X
  • Sanchis, Enrique José|||0000-0002-6856-8992
  • Lalangui-Gallegos, José Andrés
[EN] Hydrogen proton-exchange membrane fuel cells are one of the technologies that can contribute to achieve the decarbonization targets set in the transport sector. However, such systems suffer from long-term degradation when subjected to highly dynamic operation, especially if low oxygen concentration conditions are reached internally in the cathode stream. Model-based control strategies can help to detect in advance and prevent the appearance of local low oxygen concentration conditions, enlarging the fuel cell stack durability. The purpose of the current research is to develop and validate a reduced-order control-oriented model for proton exchange membrane fuel cells. The model is structured to provide detailed one-dimensional resolution in the axial direction of the advective flow (along the gas feeding channels), so that local composition and electrochemical performance can be evaluated. Instead, mean values are considered in the transversal direction for each characteristic layer of the membrane electrode assembly (bipolar plates, gas diffusion layers, catalyst layers and membrane) to reduce computational cost. Moreover, the main novelty from this model is the development of explicit solutions for mass and species conservation equations, enabling faster than real time computation that is required for model-based control purposes. Once defined, the model is calibrated and validated against a set of data extracted from the literature. The results show that the model reproduces the polarization curves at different working conditions, and also resolves the local inhomogeneities along the cell in active species concentration and electrochemical losses that appear under low cathode stoichiometry. As these local phenomena drive both degradation and efficiency, the physics-based, reduced-order formulation with explicit local-property solution proposed avoids the cause-conflation issues associated to 0D models commonly used in control platforms., This research has been partially funded by the Advanced Materials programme and was supported by the Spanish Ministry of Science and Innovation with funding from the European Union NextGenerationEU (PRTR-C17.11) and by the Generalitat Valenciana as project INNOMAT-H2 (MFA/2022/041) Additionally, the Ph.D. student Jose Andres Lalangui has also been funded by a grant from Universitat Politecnica de Valencia, Spain with reference FPI (PAID-01-22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Suitability of blends from virgin and reprocessed polylactide: performance and energy valorization kinetics

  • Gil-Castell, O.
  • Badia, J.D.
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] A blending strategy of virgin and reprocessed polylactide may be postulated as an alternative to reduce the material cost at industrial level, and as a valorisation route to plastic waste management of production scraps. The performance of blends prepared from virgin polylactide and polylactide mechanically reprocessed up to two cycles (PLA-V/R) was assessed in terms of thermo-oxidative stability, morphology, viscoelasticity and thermal kinetics for energetic valorisation. PLA-V/R blends showed appropriate thermo-oxidative stability. The amorphous nature of polylactide was preserved after blending. The viscoelastic properties showed an increment of the mechanical blend effectiveness, which suggested the feasibility of PLA-V/R blends to be used under similar mechanical conditions to those of virgin PLA goods. Finally, it was shown that the energetic valorisation of PLA-V/R blends would result in a more feasible process, due to the lower required activation energy, thus highlighting the advantages of the energetic demand for the process. In conclusion, PLA-V/R blends showed similar processability, service performance and valorisation routes than virgin PLA and therefore could be relevant in the sustainable circular industry of bioplastics., The authors would like to thank the support of the European Regional Development Fund and the Spanish Ministry of Economy and Competitiveness, through the Research Projects ENE2014-53734-C2-1-R and UPOV13-3E-1947. The Spanish Ministry of Education, Culture and Sports is also thanked for the FPU grant for O. Gil-Castell (FPU13/01916). Generalitat Valenciana is recognized for the APOSTD14/041 program for J.D. Badia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bypassing the energy barrier of homolytic photodehalogenation in chloroaromatics through self-quenching

  • Limones Herrero, Daniel
  • Miranda Alonso, Miguel Ángel
  • Pérez-Ruiz, Raúl|||0000-0003-1136-3598
  • Jiménez, M Consuelo|||0000-0002-8057-4316
Reductive photodehalogenation of chloroaromatics is assumed to proceed from the triplet excited state, although its energy is often insufficient to promote a clean homolytic C¿Cl cleavage. A clear-cut experimental proof is provided that correlates self-quenching of the directly observed triplet excited states of chlorocarbazole-based dyads 1 and 2 with photoreactivity via intramolecular charge transfer., Financial support from the Spanish Government (CTQ2010-14882, BES-2011-043706, JCI-2010-06204) and from the Generalitat Valenciana (Prometeo 2008/090 and GV/2012/041) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An Online Virtual Laboratory of Electricity

  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
  • Moltó, Germán|||0000-0002-8049-253X
  • Barros Vidaurre, Carlos Alberto
[EN] In this article, we describe a Java-based virtual laboratory, accessible via the Internet by means of a Web browser. This remote laboratory enables the students to build both direct and alternating current circuits. The program includes a graphical user interface which resembles the connection board, and also the electrical components and tools that are used in a real laboratory to build electrical circuits. Emphasis has been placed on designing access patterns to the virtual tools as if they were real ones. The virtual laboratory developed in this study allows the lecturer to adapt the behaviour and the principal layout of the different practical sessions during a course. This flexibility enables the tool to guide the student during each practical lesson, thus enhancing self-motivation. This study is an application of new technologies for active learning methodologies, in order to increase both the self-learning and comprehension of the students. This virtual laboratory is currently accessible at http://personales.upv.es/jogomez/labvir/ (in Spanish)., The support of the Institute of Education Sciences of the Polytechnic University of Valencia through project numbers PID 10.041, PID 13.085, and PAEEES 04-030 is gratefully acknowledged. We would also like to acknowledge the valuable discussions with Professor Lenin Lemus Zúñiga of the Department of Systems Data Processing and Computers at the Polytechnic University of Valencia, and the authors of Virtual Scope (Benlloch Dualde et al., 2002) for allowing us to integrate the Virtual Scope into the Virtual Laboratory. We would like to thank the R&D+i Linguistic Assistance Office at the Universidad Politécnica de Valencia for their help in revising and correcting this article.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Novel experimental methods to investigate the effects of plant phytoliths on tooth enamel wear

  • Lakhal, Yassmin
  • Redolat-Querol, Javier Abilio
  • Sanchez-Gonzalez, Estibaliz
  • Constantino, Paul J.
  • Berthaume, Michael A.
  • Borrero-Lopez, Oscar
  • Pinilla-Cienfuegos, Elena|||0000-0002-3734-0821
[EN] Dental enamel is one of the strongest biomaterials found in nature, making its mechanical failure of significant interest to the biomaterials and dental communities. Recent studies on the mechanisms of enamel wear have yielded conflicting results, highlighting the need for more realistic experimental approaches. Here, we introduce a novel experimental methodology based on nanotechnology techniques and micromechanical/materials testing to simulate and characterize, for the first time, in vitro microwear caused by the sliding of artificial models of soft leaves containing phytolith particles against human dental enamel. While embedded phytoliths undergo mechanical degradation upon cyclic contacts, they increase the extent of pre-existing wear in enamel and decrease its mineral content. Surprisingly, the primary wear mechanism of enamel is 'quasi-plastic' (i.e. permanent) deformation enabled by failure of weak interphases, dominated at the microstructural scale. Mechanisms responsible for material removal in enamel at different length scales are identified and discussed. This research offers new insights into enamel failure that can further reveal information about an animal's biology, behaviour, biomechanics and ecology, offering an interdisciplinary approach to the interface between the physical and life sciences., This work was supported by the Ministry of Science and Innovation, Spain (grant no PID2023-148827OB-I00, from MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe). E.P.-C acknowledges funding from Generalitat Valenciana (grant no. SEJIGENT/2021/039), AGENCIA ESTATAL DE INVESTIGACI & Oacute;N of Ministerio de Ciencia e Innovacion (PID2021-128442NA-I00) and to the European Regional Development Fund (ERDF) (IDIFEDER/2020/041, ID IFEDER/2021/061).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An Analysis of the Altitude Impact on Roots Compressor Operation for a Fuel Cell System

  • Piqueras, P.|||0000-0002-3767-0839
  • De La Morena, Joaquín|||0000-0003-0208-508X
  • Sanchis, Enrique José|||0000-0002-6856-8992
  • Saadouni. Ibrahim
[EN] Hydrogen fuel-cell vehicles are a promising path to transport decarbonization thanks to their high efficiency, fast refueling, and zero tailpipe emissions. To reach practical power densities, fuel-cell systems are typically boosted with radial compressors, which are prone to surge and choke—especially at high altitude. This study examines altitude operation of a fuel-cell system using a Roots compressor as an alternative. A balance-of-plant model was developed in Simscape, coupling a physics- and chemistry-based 1D fuel-cell stack model—calibrated against literature data over pressure and temperature—with measured characteristic maps of the Roots compressor. The model explores a 10–200 kW operating window from sea level to 5 km. Results show that the compressor can operate near its peak-efficiency region (60–70%) across a broad set of altitude–power conditions, capping the altitude penalty on system efficiency at ~3%. Below ~60% compressor efficiency, however, balance-of-plant performance degrades rapidly, offsetting the benefits of elevated stack pressure and constraining peak net power. These findings highlight the importance of sizing and control strategies that keep the Roots compressor within its high-efficiency envelope for high-altitude missions., This research was partially funded by the Spanish Ministry of Science and Innovation with funding from the European Union NextGenerationEU (PRTR-C17.11) and by the Generalitat Valenciana as project INNOMAT-H2 (MFA/2022/041).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Engineering Multiple GHz Mechanical Modes in Optomechanical Crystal Cavities

  • Mercadé, Laura|||0000-0002-4994-7727
  • Ortiz-Fernández, Raúl|||0000-0002-4998-0201
  • Grau-Martínez, Alberto|||0000-0002-2411-1317
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Navarro-Urrios, Daniel
[EN] Optomechanical crystal cavities (OMCCs) are fundamental nanostructures for a wide range of phenomena and applications. Usually, optomechanical interaction in such OMCCs is limited to a single optical mode and a unique mechanical mode. In this sense, eliminating the single-mode constraint¿for instance, by adding more mechanical modes¿should enable more complex physical phenomena, giving rise to a context of multimode optomechanical interaction. However, a general method to produce in a controlled way multiple mechanical modes with large coupling rates in OMCCs is still missing. In this work, we present a route to confine multiple GHz mechanical modes coupled to the same optical field with similar optomechanical coupling rates¿up to 400 kHz¿by OMCC engineering. In essence, we increase the number of unit cells (consisting of a silicon nanobrick perforated by circular holes with corrugations at both its sides) in the adiabatic transition between the cavity center and the mirror region. Remarkably, the mechanical modes in our cavities are located within a full phononic band gap, which is a key requirement to achieve ultrahigh mechanical Q factors at cryogenic temperatures. The multimode behavior in a full phononic band gap and the easiness of realization using standard silicon nanotechnology make our OMCCs highly appealing for applications in the classical and quantum realms., The authors acknowledge funding from the Spanish State Research Agency (Grants No. PID2021- 124618NB-C21 and No. PID2021-124618NB-C22) ; Generalitat Valenciana (Grants No. BEST/2020/178, No. PROMETEO/2019/123, No. IDIFEDER/2020/041, and No. IDIFEDER/2021/061). L.M. is grateful for financial support from the Next Generation EU program, Ministerio de Universidades (Gobierno de Espana).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mid-Term Effects of Forest Thinning on N Mineralization in a Semi-Arid Aleppo Pine Forest

  • Bautista, Inmaculada
  • Lado-Monserrat, Luis
  • Lull, Cristina|||0000-0001-9270-2365
  • Lidón, Antonio|||0000-0002-0455-4348
[EN] In order to assess the sustainability of silvicultural treatments in semiarid forests, it is necessary to know how they affect the nutrient dynamics in the forest. The objective of this paper is to study the effects of silvicultural treatments on the net N mineralization and the available mineral N content in the soil after 13 years following forest clearings. The treatments were carried out following a randomized block design, with four treatments and two blocks. The distance between the two blocks was less than 3 km; they were located in Chelva (CH) and Tuéjar (TU) in Valencia, Spain. Within each block, four experimental clearing treatments were carried out in 1998: T0 control; and T60, T75 and T100 where 60%, 75% and 100 of basal area was eliminated, respectively. Nitrogen dynamics were measured using the resin tube technique, with disturbed samples due to the high stoniness of the plots. Thirteen years after the experimental clearings, T100, T75 and T60 treatments showed a twofold increase in the net mineralization and nitrification rates with respect to T0 in both blocks (TU and CH). Within the plots, the highest mineralization was found in sites with no plant cover followed by those covered by undergrowth. These results can be explained in terms of the different litterfall qualities, which in turn are the result of the proportion of material originating from Pinus halepensis Mill. vs. more decomposable undergrowth residues, This work has been supported by a fellowship from the Generalitat Valenciana, Consellería de Educación, Formación y Empleo awarded to L. Lado-Monserrat (BFPI/2008/041). Silvicultural treatments were carried out by the Mediterranean Centre for Environmental Studies (CEAM) through programme ¿I+D en relación con la restauración de la cubierta vegetal y otros aspectos de investi-gación forestal¿ (R&D in relation to the restoration of vegetation cover and other aspects of forestry research). Dataloggers and probes were provided by the Generalitat Valenciana through Project ¿Efecto de diferentes sistemas de aclareo de masa forestal sobre la disponibilidad de agua, nutrientes y la regeneración de la masa arbórea y arbustiva en parcelas de pinar¿ (Effect of different forest thinning systems on the availability of water, nutrients and trees and understory regeneration in pine forest plots) (GV06/126)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

RANS modelling of a lifted H2/N2 flame using an unsteady flamelet progress variable approach with presumed PDF

  • Naud, Bertrand
  • Winklinger, Johannes Franz
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Pastor Enguídanos, José Manuel|||0000-0003-4458-0353
An unsteady flamelet/progress variable (UFPV) approach is used to model a lifted H2/N2 flame in a RANS framework together with presumed PDF. We solve the unsteady flamelets both in physical space and in mixture fraction space. We show that in the former case, the scalar dissipation rate profile strongly varies in time (while it is assumed to be fixed in time in the latter). However, this does not result in significant qualitative differences in the corresponding flamelet libraries. The progress variable is carefully defined, including both the main combustion product (H2O) and a key radical species in ignition process (HO2). The presumed-PDF model is proposed in terms of the non-normalised progress variable, without assuming its statistical independence with mixture fraction. We introduce a modelled transport equation for the mean progress variable which is consistent with the basic underlying UFPV assumption, derived from the Lagrangian flamelet model. The influence of different model parameters on the results for the mean temperature and mean species mass fractions and their fluctuations is discussed. Good results are obtained for the conditions of the considered lifted flame where detailed experimental data is available. However, at low coflow temperature the modelled flame lift-off height is shorter than expected., This work is supported by the Comunidad de Madrid through Project HYSYCOMB P2009/ENE-1597 and by the Spanish Ministry of Economy and Competitiveness under Projects ENE2008-06515-004-02 and CSD2010-00011. This research was also partially supported by the Generalitat Valenciana inside the program Ajudes per a la realitzacio de projectes d'I+D per a grups de investigaclel emergent (Reference GV/2013/041), which is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Polyamines interfere with protein ubiquitylation and cause depletion of intracellular amino acids: a possible mechanism for cell growth inhibition

  • Sayas Montañana, Enric Miquel
  • Pérez-Benavente, Beatriz
  • Manzano, C.
  • Farràs, Rosa
  • Alejandro Martinez, Santiago
  • del Pozo, J.C.
  • Ferrando Monleón, Alejandro Ramón|||0000-0002-1903-9111
  • Serrano Salom, Ramón
[EN] Spermidine is a polyamine present in eukaryotes with essential functions in protein synthesis. At high concentrations spermidine and norspermidine inhibit growth by unknown mechanisms. Transcriptomic analysis of the effect of norspermidine on the plant Arabidopsis thaliana indicates upregulation of the response to heat stress and denatured proteins. Accordingly, these polyamines inhibit protein ubiquitylation, both in vivo (in yeast, Arabidopsis, and human Hela cells) and in vitro (with recombinant ubiquitin ligase). This interferes with protein degradation by the proteasome, a situation known to deplete cells of amino acids. Norspermidine treatment of yeast cells induces amino acid depletion, and supplementation of media with amino acids counteracts growth inhibition and cellular amino acid depletion but not inhibition of protein polyubiquitylation., This work was supported by grant PROMETEO II 2014/041 from Generalitat Valenciana, Valencia, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Protection of high-density polyethylene-silicon composites from ultraviolet-visible photodegradation

  • Santonja-Blasco, L.
  • Sanchez-Ballester, S.
  • Badia, J.D.
  • Isabelle Rodriguez|||0000-0001-5479-2494
  • MESEGUER RICO, FRANCISCO JAVIER|||0000-0002-5541-9912
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] The extent of the ultraviolet¿visible (UV¿vis) photoirradiation effect on high-density polyethylene (HDPE) and HDPE¿sili-con (Si) composites is reported in terms of the addition of Si microparticles at contents of 0.1, 1, and 5 wt %. A standard acceleratedUV-vis exposure was applied over 2750 h, corresponding to 22 months in Florida. Thermogravimetry, differential scanning calorimetry,and Fourier transform infrared spectroscopy were used as reliable techniques for monitoring the quality of the HDPE-Si composites. Theincreasing addition of Si microparticles delayed the photodegradation of the HDPE¿Si composites. Because of their strong light-scattering effects, Si microparticles blocked the degradation of ter tiary carbons of the HDPE backbone and reduced the apparition ofvinyl groups; this prevented the structural impoverishment of HDPE-Si composites. Consequently, variations in the crystallization tem-perature (Tc) and melting temperature (Tm), which were indicators of photodegradation, were not modified. In general, the HDPE-Sicomposite formulation with 5 wt % Si microparticles was useful for protecting the material from photodegradation and, thus, should bean environmentally friendly, reliable alternative UV-vis blocker., Funding of this work by the European Regional Development Funds and the Spanish Ministry of Economy and Competitiveness through research projects ENE2014-53734-C2-1-R, MAT2012-35040 and the excellence programme Severo Ochoa (SEV-2016-0683) is acknowledged. One of the authors (S.S.-B.) appreciates a Formacion de Personal Investigador predoctoral grant (contract grant number BES-2012-055316). Generalitat Valenciana is thanked for grants to L. Santonja-Blasco (contract grant numbers APOSTD/2013/036) and J. D. Badia (contract grant number APOSTD/2014/041) and funding through research project PROM-ETEOII/2014/026. Universitat Politecnica de Valencia is also thanked for its support (contract grant number PAID-06-SP20120581). The authors acknowledge Puerto Asensio Bros from Inyeccion de Plasticos (Bocairent, Valencia, Spain) for kindly supplying the polymer and L. Cabedo from Jaume I University (Castello, Spain) for providing technical assistance with the preparation of the samples. Finally, the authors thank the Electron Microscopy Service of Universitat Politecnica de Valencia for its support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mapping a protein recognition centre with chiral photoactive ligands. An integrated approach combining photophysics, reactivity, proteomics and molecular dynamics simulation studies

  • Limones-Herrero, Daniel
  • Lence, Emilio
  • Gonzalez-Bello, Concepcion
  • Miranda Alonso, Miguel Ángel
  • Pérez-Ruiz, Raúl|||0000-0003-1136-3598
  • Jiménez, M Consuelo|||0000-0002-8057-4316
[EN] A multidisciplinary strategy to obtain structural information on the intraprotein region is described here. As probe ligands, (S)- and (R)-CPFMe (the methyl esters of the chiral drug carprofen) have been selected, while bovine &#61537;1-acid glycoprotein (BAAG) has been chosen as biological host. The procedure involves separate irradiation of the BAAG/(S)-CPFMe and BAAG/(R)-CPFMe complexes, coupled with fluorescence, laser flash photolysis, proteomic analysis, docking and molecular dynamic simulations. Thus, irradiation of the BAAG/CPFMe complexes at &#61548; = 320 nm, was followed by fluorescence spectroscopy. The intensity of the emission band obtained after irradiation indicated photodehalogenation, whereas its structureless shape suggested covalent binding of the resulting radical CBZMe&#9679; to the biopolymer. After gel filtration chromatography, the spectra still displayed emission, in agreement with covalent attachment of CBZMe&#9679; to BAAG. Stereodifferentiation was observed in this process. After trypsin digestion and ESI-MS/MS, incorporation of CBZMe was detected at Phe68. Docking and molecular dynamics simulation studies, which were carried out using a homology model of BAAG, reveal that the closer proximity of the aromatic moiety of the (S)- enantiomer to the phenyl group of Phe68 would be responsible for the experimentally observed more effective chemical modification of the protein. The proposed tridimensional structure of BAAG covalently modified by the two enantiomers is also provided. In principle, this approach can be extended to a variety of protein/ligand complexes., Financial support from the Spanish Ministry of Economy and Competitiveness (CTQ2013-47872-C2-1-P, SAF2013-42899-R, BES-2011-043706), Generalitat Valenciana (PROMETEOII/2013/005), Instituto de Salud Carlos III (RD12/0013/0009), Xunta de Galicia (GRC2013-041), the Conselleria de Cultura, Educacion e Ordenacion Universitaria (Centro singular de investigacion de Galicia accreditation 2016-2019, ED431G/09) and the European Regional Development Fund (ERDF) is gratefully acknowledged. E. L. thanks the Xunta de Galicia for a postdoctoral fellowship. We are grateful to the Centro de Supercomputacion de Galicia (CESGA) for use of the Finis Terrae II supercomputer. The proteomic analysis was performed in the proteomics facility of SCSIE University of Valencia that belongs to ProteoRed PRB2-ISCIII and is supported by grant PT13/0001, of the PE I+D+i 2013-2016, funded by ISCIII and FEDER
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Community startup businesses: the impact of big five personality traits and social media technology acceptance on group buying leaders

  • Liu, Anne Yenching
  • Blanco González-Tejero, Cristina
  • Botella-Carrubi, Dolores|||0000-0002-3947-6490
[EN] PurposeThis study investigates how personality traits influence individuals' intention to become community group buying (CGB) leaders.Design/methodology/approachData include 517 valid questionnaires that are employed to examine the research model and test the hypotheses using partial least squares structural equation modeling.FindingsThis study reveals that among the Big Five personality traits, extroversion and neuroticism have more impact on the perceived ease of use and usefulness of social media, and individuals with high levels of these traits are more likely to become CGB leaders. Perceived ease of use only mediates the relationship between agreeableness and CGB leader intention, whereas perceived usefulness mediates the relationships between conscientiousness and CGB leader intention and neuroticism and CGB leader intention.Originality/valueThis study can serve as a catalyst for advancing the exploration of how personality traits and social media affect the intention of being CGB leaders. In addition, the study investigates the mediating effect of social media technology acceptance obtaining valuable insights into how social media affects individuals' intention to become CGB leaders, expanding the research in this field.HighlightsIndividuals with extroversion, neuroticism, and conscientiousness personality traits exhibit higher perceived ease of use and usefulness of social media.Unlike previous research suggested, neurotic individuals appear to be attracted to becoming community group buying (CGB) leaders.Individuals with high agreeableness are encouraged by ease in pursuing CGB leadership.Perceived usefulness mediates the relationship between conscientiousness and CGB leadership intention and neuroticism and CGB leader intention., The study is funded by the Ministry of Science and Technology, Taiwan, and the award numbers is MOST109-2221-E-224-041-MY3.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of sisal and hydrothermal ageing on the dielectric behaviour of polylactide/sisal biocomposites

  • Badia, J.D.
  • Reig-Rodrigo, P.
  • Kittikorn, T.
  • Strömberg, E.
  • Ek, M.
  • Karlsson, S.
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] The dielectric properties of virgin polylactide (PLA) and its reinforced composites with different weight amounts of sisal fibres were assessed at broad temperature (from - 130 degrees C to 130 degrees C) and frequency ranges (from 10(-2)-10(7) Hz), before and after being subjected to accelerated hydrothermal ageing. The synergetic effects of both the loading of sisal and hydrothermal ageing were analysed by means of dielectric relaxation spectra. The relaxation time functions were evaluated by the Havriliak-Negami model, substracting the ohmic contribution of conductivity. The intramolecular and intermolecular relaxations were respectively analysed by means of Arrhenius and Vogel-Fulcher-Tammann-Hesse thermal activation models. The addition of fibre increased the number of hydrogen bonds, which incremented the dielectric permittivity and mainly hindered the non-cooperative relaxations of the biocomposites by increasing the activation energy. Hydrothermal ageing enhanced the formation of the crystalline phase at the so-called transcrystalline region along sisal. This fact hindered the movement of the amorphous PLA fraction, and consequently decreased the dielectric permittivity and increased the dynamic fragility. (C) 2017 Elsevier Ltd. All rights reserved., The authors acknowledge the European Regional Development Fund and the Spanish Ministry of Economy and Competitiveness, through the Research Projects ENE2014-53734-C2-1-R and UPOV13-3E-1947. The Regional Valencian Government is thanked for the APOSTD14/041 program for J.D. Badia. The financial support given by the Prince of Songkla University and KTH Royal Institute of Technology is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Normativas interoperables sobre control de autoridades para bibliotecas digitales semánticas, Interoperable standards on authority control. Trends for semantic digital libraries

  • Garzón Farinós, María Fernanda
  • Peset Mancebo, María Fernanda|||0000-0003-3706-6532
[EN] Communities of practice proceeded from web and from cultural heritage institutions worked on parallel lines to achieve the same objective: to transfer the knowledge. The tools developed for libraries are now trying to merge with semantic web technology. Both need to express instances with different forms of names. Numerous schemes for different uses of the authorities add complexity to our study. This paper clarifies the situation by drawing up a table with the equivalences between nine standards. It facilitates the decision to choose one and the exportation to other schemes as well. Vestigium web project, a biographic dictionary, tested our results., Este trabajo, como parte de Vestigium, ha sido financiado por la UCV 2011-011-011, Generalitat Valenciana; Conselleria de Educación. Redes de excelencia Prometeo 2013/041; MICINN. Subprograma de Acciones Complementarias para los Proyectos de Investigación Fundamental no Orientada. CSO2011-13730-E. Está basado en la tesis de una de las autoras
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Relevant factors for the eco-design of polylactide/sisal biocomposites to control biodegradation in soil in an end-of-life scenario

  • Badia, J.D.
  • Strömberg, E.
  • Kittikorn, T.
  • Ek, M.
  • Karlsson, S.
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] The eco-design considers the factors to prepare biocomposites under an end-of-life scenario. PLA/sisal biocomposites were obtained from amorphous polylactide and sisal loadings of 10, 20 and 30 wt% with and without coupling agent, and subjected to biodegradation in soil according to standard IS0846. Mass loss, differential scanning calorimetry and size-exclusion chromatography were used for monitoring biodegradation. A statistical factorial analysis based on the molar mass M-n, and crystallinity degree X-c pointed out the relevance and interaction of amount of fibre and use of coupling agent with the time of burial in soil., During the preparation of biocomposites, chain scission provoked a similar reduction of M-n, for coupled and non-coupled biocomposites. The amount of fibre was relevant for the increase of Xc due to the increase of nucleation sites. The coupling agent accelerated the evolution of both factors: reduction of M-n, and the consequent increase of Xc, mainly during biodegradation in soil. Both factors should be balanced to facilitate microbial assimilation of polymer segments, since bacterial digestion is enhanced by chain scission but blocked by the promotion of crystalline fractions. (C) 2017 Elsevier Ltd. All rights reserved., The authors would like to acknowledge the European Regional Development Funds and the Spanish Ministry of Economy and Competitiveness, through the Research Projects ENE2014-53734-C2-1-R and UPOV13-3E-1947. Generalitat Valenciana is thanked for the APOSTDI4/041 program for J.D. Badia. The financial support given by the Prince of Songkla University and KTH Royal Institute of Technology is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Unidirectional Synchronization of Silicon Optomechanical Nanobeam Oscillators by External Feedback

  • Alonso-Tomás, David
  • Capuj, Nestor E.
  • Navarro-Urrios, Daniel
  • Mercadé, Laura|||0000-0002-4994-7727
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] The remote synchronization of oscillators is essential for improving the performance, efficiency, and reliability of various systems and technologies, ranging from everyday telecommunications to cutting-edge scientific research and emerging technologies. In this work, we unequivocally demonstrate a unidirectional type of synchronization between two self-sustained optomechanical crystal oscillators that interact solely through an external optical feedback stage. Several pieces of experimental evidence rule out the possibility of resonant forcing and, in contrast to previous works, indicate that synchronization is achieved in the regime of natural dynamics suppression. Our experimental results are in agreement with the predictions of a numerical model describing the specific mechanical lasing dynamics of each oscillator and the unidirectional interaction between them. The outcomes of our study pave the way toward the synchronization of clock signals corresponding to far-placed processing elements in a future synchronous photonic integrated circuit., This work was supported by the MICINN Projects ALLEGRO (Grant Nos. PID2021-124618NB-C22 and PID2021- 124618NB-C21) and MOCCASIN-2D (Grant No. TED2021-132040B-C21). A.M. acknowledges funding from the Generalitat Valenciana under Grants IDIFEDER/2020/ 041 and IDIFEDER/2021/061.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mechanical recycling of polylactide, upgrading trends and combination of valorization techniques

  • Badia, J.D.
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] The upcoming introduction of polylactides in the fractions of polymer waste encourages technologists to ascertain its valorization at the best quality conditions. Mechanical recycling of PLA represents one of the most cost-effective methodologies, but the recycled materials are usually directed to downgraded applications, due to the inherent thermomechanical degradation affecting its mechanical, thermal and rheological performance. In this review, the current state of mechanical recycling of PLA is reported, with special emphasis on a multi-scale comparison among different studies. Additionally, the applications of physical and chemical upgrading strategies, as well as the chances to blend and/or composite recycled PLA are considered. Moreover, the different valorization techniques that can be combined to optimize the value of PLA goods along its life cycle are discussed. Finally, a list of different opportunities to nurture the background of the mechanical recycling of PLA is proposed, in order to contribute to the correct waste management of PLA wastes. (C) 2016 Elsevier Ltd. All rights reserved., The authors acknowledge the Spanish Ministry of Economy and Competitiveness for the projects POLYCELL (ENE2014-53734-C2-1-R) and TETRA-SEC (UPOV13-3E-1947). The Chilean Corporation for the Promotion of Productivity (CORFO) is thanked for the funding of project CEN-Chile (13CEI2-21839). Generalitat Valenciana is recognized for the BIOARMED project (APOSTD/2014/041) for J.D. Badia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design, Fabrication, and Characterization of Graphene-Silicon Nitride Integrated Mode Filters

  • Martín-Romero, Fernando|||0009-0003-0930-3921
  • Resta-López, Raquel|||0009-0007-8657-0782
  • Fontelles-Lopez, Oscar
  • Sinusia-Lozano, Miguel|||0000-0002-1744-4148
  • Gómez-Hernández, Víctor Jesús|||0000-0003-2364-8814
[EN] We present the design, fabrication, and characterization of broadband graphene-silicon nitride integrated mode filters working in the optical C-band, centered at a wavelength of 1.55 mu m. The devices presented here prevent modal crosstalk, thus avoiding signal degradation in multimode communication systems. In particular, the fabricated filters are based on a dual-mode silicon nitride waveguide, partially covered by a centered graphene nanoribbon that induces a stronger absorption for the TE0 mode than for the TE1 mode. The geometry of the design has been optimized to minimize the length and insertion losses of the device. A complete fabrication process, including the transfer and lithography of commercial graphene, has been developed. A novel approach was introduced during the etching step, which entailed the simultaneous curing of the resist to encapsulate the graphene nanoribbons prior to the deposition of the upper cladding. Finally, transmission through an array of fully fabricated filters of varying lengths was characterized with a measurement setup employing optical fiber coupling. The maximum experimentally measured contrast between the TE0 and TE1 modes is 123 dB/cm, achieved at a wavelength of 1569 nm, simultaneously with a minimum loss of -38 dB/cm for the TE1 mode. Overall, we fully demonstrate an integrated mode filter based on commercial graphene that paves the way for the implementation of integrated multimode optical communication systems., F.M.-R. acknowledges financial support from the Generalitat Valenciana (CIACIF/2022/188). M.S.L. and V.J.G. acknowledge financial support from the Generalitat Valenciana (CIAPOS/2021/293, CDEIGENT/2020/009, and ES-GENT/2024/17). M.S.L. acknowledges Ayuda a Primeros Proyectos de Investigacion (PAID-06-24), Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia (UPV). V.J.G. acknowledges the AGENCIA ESTATAL DE INVES-TIGACION of Ministerio de Ciencia, Innovacion y Universidades Grant CNS2023-145093 funded by MICIU/AEI/10.13039/501100011033 and by "European Union NextGenerationEU/PRTR". All authors acknowledge financial support from the AGENCIA ESTATAL DE INVESTIGACION of Ministerio de Ciencia e Innovacion (PID2020-118855RB-I00 and PID2024-162261NB-I00) and to the European Regional Development Fund (IDIFEDER/2020/041, IDIFEDER/2021/061). This study formed part of the Advanced Materials program and was supported by Ministerio de Ciencia e Innovacion (MCIN) with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (MFA/2022/025). Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of thermal orientation on the dielectric properties of dendronised poly(2-oxazoline) hybrid membranes

  • Wolf, Mark Henning|||0000-0003-3033-6616
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • Guardia, Jordi
  • Reina, José Antonio
  • Montané, Xavier
  • Giamberini, Marta
[EN] Dendronised poly(2-oxazoline) hybrid membranes were prepared by solution impregnation and phase inversion precipitation. Dielectric Thermal Analysis (DETA) was used to investigate the effect of the annealing temperature on the dielectric properties of these Side-Chain Liquid-Crystalline Polymers (SCLCPs). Independent of the different thermal treatments, the poly(2-oxazoline) hybrid membranes show similar dielectric spectra containing the same four relaxation mechanisms (¿-, ¿Tg-, ¿Clear-, and ¿-relaxation). The thermal orientation reduces the activation energy of the ¿-relaxation, by modifying the steric hindrance of the associated aliphatic side chains. Aligning the polymer chains to each other, due to thermal annealing, leads to a less fragile structure. This reduced cooperativity decreases the temperature of the ¿Tg-relaxation, related to the glass transition. The highly ordered structure of the oriented membranes increases the activation energy and temperature of the ¿Clearrelaxation, associated with the freeing movement of the mesogenic side groups, especially in the homeotropically aligned membrane. The random orientation decreases the electron conductivity and its thermal activation, while the homeotropic alignment results in an increase, due to the orientation of the columns. The thermal orientation of SCLCPs leads to differences in the temperature dependence and cooperativity of the molecular relaxations and the conductive properties, providing valuable insights into their molecular structure and arrangement., This study forms part of the Advanced Materials programme and was supported by the Spanish Ministry of Science and Innovation with funding from European Union NextGenerationEU (PRTR-C17.11) and by Generalitat Valenciana (MFA/2022/041). The authors also thank the Spanish Ministry of Universities for the pre-doctoral FPU grant of M.H. Wolf (FPU21/00853) and the Universitat Rovira i Virgili and Diputacio de Tarragona for a pre-doctoral contract (2020PMF-PIPF-21) of J. Guardia ` within its Martí i Franques programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Soil moisture increment as a controlling variable of the Birch effect . Interactions with the pre-wetting soil moisture and litter addition

  • Lado Monserrat, Luis
  • Bautista Carrascosa, María Inmaculada
  • Herrera Fernandez, Rafael
  • Lull, Cristina|||0000-0001-9270-2365
  • Lidón, Antonio|||0000-0002-0455-4348
The Birch effect is a pulse in soil C and N mineralization caused by the wetting of dry soils, but the role of the soil moisture increment (Delta SWC) is still poorly understood. We quantified the relationship between Delta SWC and the Birch effect, and its interactions with pre-wetting soil moisture (preSWC) and substrate supply. Two soils (clay loam and sandy loam) under a Pinus halepensis forest were subjected to rewetting in laboratory treatments combining different Delta SWC and preSWC values, with or without additional substrate (5 mg g(-1) P. halepensis needles). Respiration flush (Delta R), changes in microbial biomass C (MBC) and net N mineralization (NMIN) were measured. Overall, we found a relationship with the form: Delta R = a Delta SWC + b, where the slope (a) was significant only when pre-wetting water potential was below a threshold value in the range of -100 to -1,200 kPa. However, the threshold alone does not fully describe the role of preSWC in slope variability. Substrate addition modified the Delta SWC sensitivity of Birch effect, enhancing it in the clay loam and suppressing it in the sandy loam. The intensity of the wetting is a dominant factor regulating Birch effect, and Delta SWC is useful for its quantification., This work was supported by a fellowship from Generalitat Valenciana, Conselleria de Educacion, Formacion y Empleo awarded to L. Lado-Monserrat (BFPI/2008/041). Thanks are due to Antonio del Campo for help in data analyses and to Antonio Lloret for laboratory work. The authors wish to thank Joana Oliver for invaluable laboratory support. The authors also thank two anonymous reviewers and Professor Stephan Glatzel from the University of Rostock, Germany, for the critical review of the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Polylactide-based self-reinforced composites biodegradation: Individual and combined influence of temperature, water and compost

  • Gil-Castell, O.
  • Badia, J.D.
  • Ingles-Mascaros, S.
  • Serra, A.
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] Self-reinforced polymer composites (SRCs) are proposed as a suitable alternative for composite development, based in the combination of a polymeric matrix and a polymeric fibre made of the same polymer. SRCs based in polylactide (PLA) could be fully biodegradable and their valorisation routes could presumably be assimilated to those for neat PEA. In this sense, the aim of this study was to develop new self-reinforced PLA-based composites and ascertain their biodegradability. For this purpose, PLA-based SRCs were obtained through a thermo-compression procedure and their biodegradability corroborated under standard conditions (ISO 20200). Moreover, a deep study of the effect of the different factors involved in the biodegradation of the composites such as the temperature, the water and the compost medium was considered relevant to delimitate the long-term properties and valorisation routes for these materials. The macroscopic and microscopic appearance as well as the thermo-oxidative stability, the thermal properties and the molar mass were evaluated. Although degradation was perceived due to the effect of temperature, the synergistic combination of water and temperature and compost was found to play a key role in the biodegradation of these materials. Overall, these SRCs can be considered as promising candidates, since their end-of-life management options can be guaranteed under standardised composting conditions. (C) 2018 Elsevier Ltd. All rights reserved., The authors would like to thank the support of the European Regional Development Fund and the Spanish Ministry of Economy and Competitiveness, through the Research Projects ENE2014-53734-C2-1-R and UPOV13-3E-1947. The Spanish Ministry of Education, Culture and Sports is also thanked for the FPU grant for O. Gil-Castell (FPU13/01916). Generalitat Valenciana is recognised for the APOSTD14/041 program for J.D. Badia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrospun Poly(ethylene-co-vinyl alcohol)/Graphene Nanoplatelets Composites of Interest in Intelligent Food Packaging Applications

  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • Echegoyen, Y.
  • Badia, Jose D.
  • Lagaron Cabello, José María
[EN] Graphene nanoplatelets (GNPs) were synthetized from graphite powder and, thereafter, embedded in poly(ethylene-co-vinyl alcohol) (EVOH) fibers by electrospinning in the 0.1-2 wt.-% range. The morphological, chemical, and thermal characterization performed on the electrospun nanocomposite fibers mats revealed that the GNPs were efficiently dispersed and rolled along the EVOH fibrilar matrix up to contents of 0.5 wt.-%. Additionally, the dielectric behavior of the nanocomposite fibers was evaluated as a function of the frequency range and GNPs content. The obtained results indicated that their dielectric constant rapidly decreased with the frequency increase and only increased at low GNPs loadings while the nanocomposite fiber mats became electrically conductive, with the maximum at 0.5 wt.-% GNPs content. Finally, the electrospun mats were subjected to a thermal post-treatment and dark films with a high contact transparency were obtained, suggesting that the nanocomposites can be used either in a nonwoven fibers form or in a continuous film form. This study demonstrates the potential of electrospinning as a promising technology to produce GNPs-containing materials with high electrical conductivity that can be of potential interest in intelligent packaging applications as "smart" labels or tags., This research was funded by the European Regional Development Funds (ERDF) and Ministry of Science, Innovation, and Universities (MICIU) project numbers ENE2014-53734-C2-1-R, ENE2017-86711-C3-1-R, UPOV13-3E-1947, and AGL2015-63855-C2-1-R. S.T.-G. acknowledges the MICIU for his Juan de la Cierva contract (IJCI-2016-29675). J.D.B. and R.T.-J. also thank Generalitat Valenciana (GV) for their projects APOSTD14/041 and GRISOLIA/2012/003, respectively.
Repositori Institucional UIB
Publicación Artículo científico (JournalArticle)

Open Protocols, the new standard for acoustic tracking: results from interoperability and performance tests in European waters

  • Aspillaga, Eneko
  • Bruneel, Stijn
  • Alós, Josep
  • Verhelst, Pieterjan
  • Abecasis, David
  • Aarestrup, Kim
  • Birnie-Gauvin, Kim
  • Afonso, Pedro
  • Palmer, Miquel
  • Reubens, Jan
[eng] Background: The lack of compatibility between acoustic telemetry equipment from different manufacturers has been a major obstacle to consolidating large collaborative tracking networks. Undisclosed encrypted signal coding protocols limit the use of acoustic telemetry to study animal movements over large spatial scales, reduce competition between manufacturers, and stifle innovation. The European Tracking Network, in collaboration with several acoustic telemetry manufacturers, has worked to develop new transparent protocols for acoustic tracking. The results are energy-efficient transmission protocols accessible to all researchers and manufacturers. Today, the Open Protocols (OP) are already available to manufacturers and developers, and the first transmitters and receivers to implement them are already in the water. Results: The main objective of this study was to confirm the compatibility between devices from different manufacturers using OP, characterise the acoustic range of each transmitter–receiver manufacturer combination, compare the detection efficiency to the standard protocols used at present (R64K and encrypted protocols), and assess its robustness against spurious detections. An international collaborative effort was made to conduct acoustic range tests in four main aquatic habitats: a river, a coastal lagoon, a coastal habitat, and the open sea. Receivers and transmitters from different manufacturers were deployed at increasing distances from each other using the same experimental design at each location. The decay of detection probability with distance was modelled for each transmitter–receiver manufacturer combination by applying logistic regression using a Bayesian approach. Furthermore, to thoroughly assess performance differences in an applied research context, we conducted a direct field comparison between groups of smolts tagged with OP and R64K tags, tracking their migration to the sea. Conclusions: Our results confirm full compatibility between the tested devices, with negligible differences in the measured acoustic ranges between OP manufacturers and when compared to encrypted protocols. The OP was also robust against spurious detections, and the field comparison between OP and R64K showed equal performance. We hope these novel insights will encourage international research groups to promote OP-based studies to ensure compatibility and maximise the benefits of acoustic telemetry networks.
Repositori Institucional UIB
Publicación Artículo científico (JournalArticle)

Inferring activity patterns of aquatic animals from single-receiver acoustic telemetry setups

  • Aspillaga, Eneko
  • Alós, Josep
  • Catalán, Ignacio A.
  • Moltó, Vicenç
  • Abad-Platas, Jordi
  • Villegas-Ríos, David
[eng] 1. Acoustic telemetry has become an essential tool for studying activity patterns of animals in aquatic environments. Activity is typically recorded using transmitters with integrated sensors or dense receiver arrays for positional tracking. While effective, these approaches are financially and logistically expensive due to the need for advanced transmitters or a large number of acoustic receivers. 2. This study presents a novel methodology to quantify activity patterns from single-receiver acoustic telemetry setups. Our method extracts the time of arrival (TOA) of acoustic signals and estimates the relative distance between the individual and the receiver. By examining variations in TOA-based distances, movement parameters such as step lengths can be calculated, which can then be used to classify behavioural states through hidden Markov models or other statistical approaches. 3. We validated our approach through a positioning test and demonstrated its effectiveness in inferring behavioural states across multiple species by analysing six acoustic telemetry datasets. The validation also included a comparison between TOA-based distances in multiple receivers and a positioned telemetry dataset. 4. Our method proved to be effective in estimating the distance between transmitters and single receivers, as well as characterising the activity patterns of the analysed species. It is particularly effective for species with certain site fidelity, where movement relative to a fixed receiver can provide significant insights into activity patterns. The method can also be applied in analysis workflows to check post-tagging or natural mortality by identifying stationary transmitters. By providing a cost-efficient method, this approach will enable detailed behavioural studies in a wide range of species and contexts, leveraging minimum equipment availability.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Dopaminergic control of ADAMTS2 expression through cAMP/CREB and ERK: molecular effects of antipsychotics

  • Ruso Julve, Fulgencio
  • Pombero, Ana
  • Pilar Cuéllar, Fuencisla
  • García Díaz, Nuria
  • Garcia López, Raquel
  • Juncal Ruiz, María
  • Castro, Elena
  • Díaz, Álvaro
  • Vazquez Bourgón, Javier
  • García Blanco, Agustín
  • Garro Martínez, Emilio
  • Pisonero, Helena
  • Estirado, Alicia
  • Ayesa Arriola, Rosa
  • López Giménez, Juan
  • Mayor, Federico
  • Valdizán, Elsa
  • Meana Martínez, José Javier
  • González Maeso, Javier
  • Martínez, Salvador
  • Vaqué, José Pedro
  • Crespo Facorro, Benedicto
A better understanding of the molecular mechanisms that participate in the development and clinical manifestations of schizophrenia can lead to improve our ability to diagnose and treat this disease. Previous data strongly associated the levels of deregulated ADAMTS2 expression in peripheral blood mononuclear cells (PBMCs) from patients at first episode of psychosis (up) as well as in clinical responders to treatment with antipsychotic drugs (down). In this current work, we performed an independent validation of such data and studied the mechanisms implicated in the control of ADAMTS2 gene expression. Using a new cohort of drug-na)Ve schizophrenia patients with clinical follow-up, we confirmed that the expression of ADAMTS2 was highly upregulated in PBMCs at the onset (drug-naive patients) and downregulated, in clinical responders, after treatment with antipsychotics. Mechanistically, ADAMTS2 expression was activated by dopaminergic signalling (D-1-class receptors) and downstream by cAMP/CREB and mitogen-activated protein kinase (MAPK)/ERK signalling. Incubation with antipsychotic drugs and selective PKA and MEK inhibitors abrogated D-1-mediated activation of ADAMTS2 in neuronal-like cells. Thus, D-1 receptors signalling towards CREB activation might participate in the onset and clinical responses to therapy in schizophrenia patients, by controlling ADAMTS2 expression and activity. The unbiased investigation of molecular mechanisms triggered by antipsychotic drugs may provide a new landscape of novel targets potentially associated with clinical efficacy., We are highly indebted to the participants and their families for their cooperation in this study. We also thank IDIVAL biobank (Ines Santiuste and Jana Arozamena) for clinical samples and data as well as the PAFIP members (Marga Corredera) for the data collection. This work was supported by: SAF2016-76046-R and SAF2013-46292-R (MINECO and FEDER) to B.C.F., PI16/00156 (isciii and FEDER) to J.P.V., LUCHAMOS POR LA VIDA project to F.R.J. and J.P.V., SAF2017-83702-R (MINECO and FEDER), Red TERCEL RD12/0019/0024 (ISCIII) and GVA-PROMETEO 2018/041 (Generalitat Valenciana) to S.M. J.P.V. supported by the RyC research programme (RYC-2013-14097) and F.R.J. by the predoctoral research programme (BES-2014-070615), from MINECO and FEDER.
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Polarization diversity in a long-haul transequatorial HF link from Antarctica to Spain

  • Bergada, Pau
  • Alsina-Pagès, Rosa Ma
  • Hervás, Marcos
This paper describes a set of experiments which examine the feasibility of applying polarization diversity to a 12,760 km ionospheric link from Livingston Island (62.6°S, 60.4°W), South Shetlands, to Cambrils (41.0°N, 1.0°E), Spain. A transmitting monopole and both a monopole and a dipole (inverted‐V) at reception are the antennas used in this measurement campaign. Receiving antennas are orthogonal polarized to check whether wave polarization rotation causes differences between simultaneous signals. The results gathered in the paper indicate that there is a marked difference between simultaneous signals at vertical and horizontal polarized antennas, which depends on the hour of the day and the signal frequency. In this low‐throughput HF data link, polarization diversity could be used to increase SNR and performance through smart combination of receiving signals, due to the low cross‐correlation factor between them
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

El dibujo de la figura humana como instrumento de la evaluación de danza creativa en personas con Alzheimer: estudio de caso, Human figure drawing as an instrument of evaluation of creative dance in individuals with Alzheimer's: a case study

  • Pérez Testor, Susana
  • Cabedo Sanromà, Josep
  • Barnet, Sílvia
  • Guerra-Balic, Myriam
  • Griñó Roca, Anna
  • Aceituno Martín, Pilar
  • Salvati Magini, Chiara
Presentamos un estudio de caso de una mujer de 89 años diagnosticada de Alzheimer, en un grado de deterioro cognitivo moderado-severo. Para realizar el estudio se utilizaron el test DAP-IQ (Reynolds & Hickman, 2004) y el test de la Persona del HTP (Buck 2008) con el objetivo de analizar la evolución del dibujo y el impacto de dos intervenciones de danza creativa en un intervalo de tres meses. Los resultados muestran que las puntuaciones disminuyen en los dos dibujos elaborados antes de la clase de danza creativa y que aumentan en los dos realizados inmediatamente después de la clase. A partir de estos resultados podemos concluir que el dibujo sin la intervención de la danza creativa tiende a desaparecer, mientras que en el dibujo elaborado después de la intervención de la danza creativa, aparecen partes del cuerpo dibujado que se habían omitido, tales como cabellos, cejas, nariz, cintura, ojos, piernas y pies., We are presenting a case study of an 89-year-old woman diagnosed with Alzheimer’s disease with a moderate-to-severe degree of cognitive deterioration. To conduct the study, the DAP-IQ test (Reynolds & Hickman, 2004) and the HTP test (Buck 2008) were used with the goal of analysing the development of drawing and the impact of two creative dance interventions in a three-month interval. The results show that the scores were lower on the two drawings made before the creative dance class and higher on the two made immediately after the class. Based on these results, we can conclude that without the creative dance intervention, drawing tends to disappear, while in the drawings made after the creative dance intervention, body parts that had been omitted tended to be drawn, such as hair, eyebrows, nose, waist, eyes, legs and feet., info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Design and Validation of Probes and Sensors for the Characterization of Magneto-Ionic Radio Wave Propagation on Near Vertical Incidence Skywave Paths

  • Witvliet, Ben
  • Alsina-Pagès, Rosa Ma
  • van Maanen, Erik
  • Laanstra, Geert Jan
This article describes the design and validation of deployable low-power probes and sensors to investigate the influence of the ionosphere and the Earth’s magnetic field on radio wave propagation below the plasma frequency of the ionosphere, known as Near Vertical Incidence Skywave (NVIS) propagation. The propagation of waves that are bent downward by the ionosphere is dominated by a bi-refractive mechanism called ‘magneto-ionic propagation’. The polarization of both downward waves depends on the spatial angle between the Earth’s magnetic field and the direction of propagation of the radio wave. The probes and sensors described in this article are needed to simultaneously investigate signal fading and polarization dynamics on six radio wave propagation paths. The 1-Watt probes realize a 57 dB signal-to-noise ratio. The probe polarization is controlled using direct digital synthesis and the cross-polarization is 25–35 dB. The intermodulation-free dynamic range of the sensor exceeds 100 dB. Measurement speed is 3000 samples/second. This publication covers design, practical realization and deployment issues. Research performed with these devices will be shared in subsequent publications.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modification of poly(dimethylsiloxane) as a basis for surface wrinkle formation: Chemical and mechanical characterization

  • Campo, Ángel Adolfo del
  • Nogales, Aurora
  • Ezquerra, Tiberio A.
  • Rodríguez-Hernández, Juan
9 págs.; 6 figs., In this manuscript, the processes occurring during UV-ozone treatment on polydimethylsiloxane (PDMS) surfaces i.e. formation of a stiff silica-like layer and surface degradation have been studied. While the chemical changes have been evaluated using Confocal Raman Microscopy (CRM) with submicrometer resolution, partial surface degradation occurring during longer ozone treatments have been evidenced both by Optical Profilometry and AFM. Whereas previous studies reported the formation of a thin silica layer of around 20–30 nm up to 200 nm depending on the method employed, herein, we demonstrated that in effect a thin rigid layer is formed but instead of a sharp interface predicted by previous reports a gradient depth profile was obtained. CRM evidenced the formation of a 4 μm layer of modified material. By Quantitative Nanomechanical Mapping (QNM) and based on the equations that predict the wrinkle formation, a surface layer thickness of around of 4.5 μm was also determined.© 2016 Elsevier Ltd. All rights reserved., The authors gratefully acknowledge support from the Consejo Superior de Investigaciones Científicas (CSIC). Equally, this work was financially supported by the Ministerio de Economía y Competitividad (MINECO) (MAT2013-47902-C2-1-R, MAT2013-48009-C04-1-P, MAT2014-59187-R and MAT2015-66443-C2-1-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Wrinkling and Folding on Patched Elastic Surfaces: Modulation of the Chemistry and Pattern Size of Microwrinkled Surfaces

  • Nogales, Aurora
  • Campo, Ángel Adolfo del
  • Ezquerra, Tiberio A.
  • Rodríguez-Hernández, Juan
8 pags., 5 figs., 2 tabs., An unconventional strategy is proposed that takes advantage of localized high-deformation areas, referred to as folded wrinkles, to produce microstructured elastic surfaces with precisely controlled pattern dimensions and chemical distribution. For that purpose, elastic PDMS substrates were prestretched to a different extent and oxidized in particular areas using a mask. When the stretching was removed, the PDMS substrate exhibited out-of-plane deformations that largely depend on the applied prestretching. Prestretchings below 100% lead to affine deformations in which the treated areas are buckled. On the contrary, prestretchings above ? >100% prior to surface treatment induce the formation of folded wrinkles on those micrometer-size ultraviolet-ozone (UVO) treated areas upon relaxation. As a result, dual periodic wrinkles were formed due to the alternation of highly deformed (folded) and low deformed (buckled) areas. Our strategy is based on the surface treatment at precise positions upon prestretching of the elastic substrate (PDMS). Additionally, this approach can be used to template the formation of wrinkled surfaces by alternating lines of folded wrinkles (valleys) and low-deformed areas (hills). This effect allowed us to precisely tune the shape and distribution of the UVO exposed areas by varying the prestretching direction. Moreover, the wrinkle characteristics, including period and amplitude, exhibit a direct relation to the dimensions of the patterns present in the mask., The authors gratefully acknowledge support from the Consejo Superior de Investigaciones Cientifícas (CSIC). Equally, this work was financially supported by the Ministerio de Economía y Competitividad (MINECO) (Grants MAT2013-47902-C2-1- R, MAT2013-48009-C04-1-P, MAT2014-59187-R, and MAT2015-66443-C2-1-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spectroscopic characterization of the on-surface induced (cyclo)dehydrogenation of a N-heteroaromatic compound on noble metal surfaces

  • Palacio, Irene
  • Pinardi, Anna Lisa
  • Martínez, José I.
  • Preobrajenski, Alexei
  • Cossaro, Albano
  • Jancarik, Andrej
  • Stará̈, Irena G.
  • Méndez, Javier
  • Martín-Gago, José A.
  • López, María Francisca
New nanoarchitectures can be built from polycyclic aromatic hydrocarbons (PAHs) by exploiting the capability of some metal surfaces for inducing cyclodehydrogenation reactions. This bottom-up approach allows the formation of nanostructures with a different dimensionality from the same precursor as a consequence of the diffusion and coupling of the PAHs adsorbed on the surface. In this work we present a thorough study, by means of a combination of X-ray photoemission spectroscopy, near-edge X-ray absorption fine structure and scanning tunneling microscopy with first principle calculations of the structural and chemical transformations undergone by pyridyl-substituted dibenzo[5]helicene on three coinage surfaces, namely Cu(110), Cu(111) and Au(111). Upon annealing, on-surface chemical reactions are promoted affecting the adsorbate/substrate and the molecule/molecule interactions. This thermally induced process favours the transformation from diffusing isolated molecules to polymeric nanographene chains and finally to N-doped graphene., This work has been supported by the Spanish MINECO (Grant MAT2014-54231-C04-1-P), the EU via the ERC-Synergy Program (Grant ERC-2013-SYG-610256 NANOCOSMOS) and the Innovation program under grant agreement No. 696656 (GrapheneCore1-Graphene-based disruptive technologies). JIM acknowledges the financial support by the “Ramón y Cajal” Program of MINECO (Grant RYC-2015-17730) and Nanocosmos, as well as computing resources from CTI-CSIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The impact of the synthesis conditions on SrAl2O4:Eu, Dy formation for a persistent afterglow

  • Rojas-Hernández, Rocío E.
  • Rubio Marcos, Fernando
  • Dos Santos Rezende, Marcos Vinícius
  • Rodríguez Barbero, Miguel Ángel
  • Serrano Rubio, Aída
  • Muñoz-Noval, A.
  • Fernández Lozano, José Francisco
The design of phosphorescent materials, highly crystalline, with a submicron particle size is a challenge for industrial applications. Based on molten salt assisted process, the effects of salt/SrAl0 molar ratio on the phase evolution are studied. A significant influence of salt/SrAl0 molar ratio on synthesis and final properties has been observed. Moreover, the phase evolution has been explored as a function of treatment temperature. To remove the salt from the powder, the wash step is carried out with glycerin avoiding hydrolysis reaction due to the sensitivity of strontium aluminates to water. The salt/SrAl0 molar ratio of 3:1 and the thermal treatment at 1000 0C are preferred, avoiding extra wash step. Here, we have obtained highly crystalline SrAl0:Eu, Dy powder with a particle size =0.5 ≤m after a 2 h treatment at 1000 0C employing the molten salt approach. As a result, we believe that the general strategy described in this study opens the possibility of obtaining technologically relevant phosphors with enhanced properties, expanding their application range to radiation detection., The authors express their thanks to the MINECO (Spain) project MAT2013-480089-C04-1-P for their financial support. Dr. F. Rubio-Marcos is also indebted to MINECO and European Social Fund for a “Juan de la Cierva” contract (ref: JCI-2012-14521).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Precise tuning of the nanostructured surface leading to the luminescence enhancement in SrAl2 O4 based core/shell structure

  • Rojas-Hernández, Rocío E.
  • Rubio Marcos, Fernando
  • Serrano Rubio, Aída
  • Campo, Ángel Adolfo del
  • Fernández Lozano, José Francisco
Intensive research has been focused on the synthesis of long-lasting SrAl2O4:EuDy in luminescent materials field. Traditionally, SrAlO:EuDy is synthesized in bulk form by solid state. However, their development remains restrained due to this technique is not compatible with large-scale production, sustainability and nanometer-scale requirements. Despite nano-range particles have been obtained by chemical routes, photoluminescence response decreases and application became unpractical. It remains a challenge to synthesize nonrare-earth (RE) phosphors with high photoluminescence. One major challenge for the luminescent materials community is to devise methods to deliver innovative, sustainable and cost effective solutions for the reduction of RE because of the lack of RE availability. Here, we suggest a solution based on molten salts, obtaining nanosheets or micro/nanostructured SrAlO:Eu, Dy particles with core-shell structure, employing only 50% of standard amounts of RE. Core-size and shell thickness and crystallinity can be tuned by post-thermal treatment, through which can be modulated the Eu+2 fraction. We find that our methodology leads the functional features of the analogous micron counterpart. These results can be considered a great achievement to scale-up the process. Besides, the harmful collateral effect of nanotechnology must be addressed by using new safe by design core-shell nanostructures., The authors express their thanks to the MINECO (Spain) project MAT2013-480089-C04-1-P for their financial support. F.R.-M. is also indebted to MINECO for a “Juan de la Cierva” contract (ref: JCI-2012-14521), which is co-financed with European Social Fund.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Long lasting phosphors: SrAl2O4:Eu, Dy as the most studied material

  • Rojas-Hernández, Rocío E.
  • Rubio Marcos, Fernando
  • Rodríguez Barbero, Miguel Ángel
  • Fernández Lozano, José Francisco
The aim of this review is to present the progress in preparing phosphorescent particles based on the reported research. We highlight the recent progress on SrAl2O4: Eu, Dy particles by describing the advantages and disadvantages of the different synthesis methods. This long-lasting material combines several favorable attributes: is stable, efficient, and less toxic that their predecessors. For that, large attention has been paid to the development of an efficient preparation method of SrAl2O4 doped powders, including sol-gel method, hydrothermal synthesis, laser synthesis, combustion synthesis and solid state reaction. However, many of these techniques are not compatible with large-scale production and with the principles of sustainability. Industrial processing of highly crystalline powders usually requires high synthesis temperatures, typically between 1300 and 1900 °C, with long processing times, especially for solid state reaction. As a result, the average particle size is typically within the 20–100 μm range. This large particle size is limiting for current applications that demand sub-micron particles. The microstructure and size which are controlled through adjusting the experimental conditions have a great influence in the final photoluminescence response. Therefore, much effort has been devoted to exploring new strategies to obtain sub–micrometric particles, avoiding stringent, intricate, tedious, costly, or inefficient preparation steps and intrinsic toxicity or elemental scarcity. Moreover, persistent luminescent nanomaterials have attracted great interest to their potential application in solar cells, biological labeling and imaging and security encode. In addition, we describe the challenges and future of phosphorescent materials in regard to their synthesis, properties and applications. Finally, some further suggestions have been also addressed to enhance its photoluminescence response from the perspective of the synthesis. We believe that such a review can accelerate the developments of SrAl2O4-based materials., MINECO (Spain) project; MAT2013-480089-C04-1-P for their financial support. Dr. F. Rubio Marcos is also indebted to MINECO for a ‘‘Juan de la Cierva’’ contract (ref: JCI-2012-14521),, Peer reviewed
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Antioxidant, antimicrobial and anti-inflammatory activities of ling-heather honey powder obtained by different methods with several carriers

  • Osés Gómez, Sandra María
  • Cantero, Leire
  • Puertas López, Guillermo
  • Fernández Muiño, Miguel Ángel
  • Sancho Ortiz, María Teresa
Honey powder is being increasingly used in food, cosmetic and pharmaceutical industry, because it avoids inconveniences of raw honey, such as high viscosity, stickiness and formation of sugar crystals. It is of paramount importance to know if honey powders keep the features of raw honeys. This is the first study, in which total phenolics, total flavonoids, and biological properties of ling-heather (Calluna vulgaris (L.) Hull) honey powders obtained by different drying methods (spray drying, vacuum drying and freeze drying), using different carriers (Arabic gum, whey protein isolate and maltodextrin) were assessed. Results showed that all the drying procedures and carriers retained the honey phenolics in the honey powders. Honey powders' antioxidant activities against different free radicals (ABTS•+, ROO•, •OH and O2•-) were higher than those of the raw honeys, while honey powders’ anti-inflammatory and antimicrobial activities against several microorganisms (Staphylococcus aureus, Listeria monocytogenes and Escherichia coli) were lower. Concentration of honey in the powder and type of carrier used for dehydration were the key factors for the quality of honey powders. However, the drying procedure did not strongly influence the parameters and properties studied., Junta de Castilla y León (Spain) for financial support (BU041G18), and for the research assistant contract given to Ms. Leire Cantero (Grant No. UBU-09-A).
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Impact of the Drying Procedure and Botanical Origin on the Physico-Chemical and Potentially Bioactive Properties of Honey Powders

  • Cantero, Leire
  • González Ceballos, Lara
  • Vallejos Calzada, Saúl
  • Puertas López, Guillermo
  • Fernández Muiño, Miguel Ángel
  • Sancho Ortiz, María Teresa
  • Osés Gómez, Sandra María
This study was aimed at researching the impact of the drying procedure (using the most appropriate honey–maltodextrin concentration for each drying technique) and botanical origin of honey on the physicochemical and potentially bioactive properties of honey powders that were made using maltodextrin as a carrier. The research was carried out with thyme, lavender, vetch and multifloral honey dehydrated using vacuum drying and freeze drying. The analysed parameters were moisture, water activity, colour, glass transition temperature, powder recovery, hygroscopic index and rate, tapped density, solubility, and phenolics as well as antiradical (ABTS•+, ROO•, •OH and O2•−), anti-inflammatory and antimicrobial (against Staphylococcus aureus, Escherichia coli and Listeria monocytogenes) activities. Freeze drying provided the highest recoveries. Powders obtained using freeze drying showed higher moisture and solubility as well as lower glass transition temperature, density and hygroscopicity than those obtained using vacuum drying. Hygroscopicity, glass transition temperature and antimicrobial activity against St. aureus depended on the drying procedure–honey concentration. Colour, anti-O2•− activity and antimicrobial activity against L. monocytogenes depended on the botanical origin of the raw honey. Moisture, solubility, density, total phenolic content, anti-ABTS•+ and anti-ROO• activities as well as anti-inflammatory activity and antimicrobial activity against E. coli depended on the drying procedure–honey concentration and botanical origin., The authors gratefully acknowledge Junta de Castilla y León (Spain) for financial support (BU041G18) and for the research assistant contract given to Leire Cantero (Grant No. UBU09-A).
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Avoiding order reduction when integrating reaction–diffusion boundary value problems with exponential splitting methods

  • Alonso Mallo, Isaías
  • Cano, Begoña
  • Reguera López, Nuria
In this paper, we suggest a technique to avoid order reduction in time when integrating reaction–diffusion boundary value problems under non-homogeneous boundary conditions with exponential splitting methods. More precisely, we consider Lie–Trotter and Strang splitting methods and Dirichlet, Neumann and Robin boundary conditions. Beginning from an abstract framework in Banach spaces, a thorough error analysis after full discretization is performed and some numerical results are shown which corroborate the theoretical results., This work has been supported by Ministerio de Ciencia, Innovación y Universidades, FEDER, Spain and Junta de Castilla y León, Spain through projects MTM 2015-66837-P, VA024P17, VA041P17 and VA105G18.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

A simple one-pot determination of both total phenolic content and antioxidant activity of honey by polymer chemosensors

  • González Ceballos, Lara
  • Cavia Camarero, María del Mar
  • Fernández Muiño, Miguel Ángel
  • Osés Gómez, Sandra María
  • Sancho Ortiz, María Teresa
  • Ibeas Cortes, Saturnino
  • García García, Félix Clemente
  • García Pérez, José Miguel
  • Vallejos Calzada, Saúl
We have developed a new method for the rapid (2 h) and inexpensive (materials cost < 0.02 €/sample) “2-in-1” determination of the total phenolic content (TPC) and the antioxidant activity (AOX) in honey samples. The method is based on hydrophilic colorimetric films with diazonium groups, which react with phenols rendering highly colored azo groups. The TPC of the sample is correlated to its trolox equivalent antioxidant capacity (TEAC). The intensity of the color allows us to determine both TPC and TEAC of the sample by the analysis of a picture taken with a smartphone that is analysed by the use of the color-definition-parameters (RGB). The controlled light conditions and the systematic use of the same camera avoid the periodical calibration of the system improving the efficiency of the method. Thus, it is a simple method carried out by non-specialized personnel and it involves much lower money and time investment compared to traditional methods., We gratefully acknowledge the financial support provided by FEDER (Fondo Europeo de Desarrollo Regional), and both the Spanish Ministerio de Economía, Industria y Competitividad (MAT2017-84501-R) and the Consejería de Educación—Junta de Castilla y León (BU061U16 and BU041G18) are gratefully acknowledged.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Tesis doctoral (DoctoralThesis)

Obtención de miel en polvo e investigación de sus propiedades físico-químicas y biológicas

  • Cantero Puente, Leire
La presente Tesis Doctoral titulada «Obtención de miel en polvo e investigación de sus propiedades físico-químicas y biológicas», tiene como objetivo general la obtención de miel en polvo seleccionando el procedimiento tecnológico y el coadyuvante más adecuado, así como evaluar el impacto de los procesos de desecación sobre las propiedades físico-químicas, funcionales y microbiológicas del producto final, comparándolo con los valores de las mismas mieles naturales. Para el desarrollo de este trabajo se utilizaron nueve muestras de mieles castellano-leonesas de diferentes orígenes botánicos: 3 mieles de brecina (Calluna vulgaris, (L.) Hull), 2 mieles de tomillo (Thymus sp.), 3 mieles de lavanda (Lavandula sp.), 1 miel de veza (Leguminosae tipo Vicia sp.) y tres mieles de milflores., This Doctoral Thesis, entitled «Production of powdered honey and investigation of its physicochemical and biological properties», is aimed to research the production of powdered honey by choosing the most suitable technological process and carrier, as well as evaluating the impact of the drying technique on the physicochemical, functional, and microbiological properties of the final product, comparing them with those of natural raw honey. For this study, nine honeys from Castilla y León, were dehydrated and powdered. Botanical origins were the following: Three samples were lingheather (Calluna vulgaris, (L.) Hull) honeys. Two samples were thyme (Thymus spp.) honeys. Three samples were lavender (Lavandula spp.) honeys. One sample was vetch (Leguminosae type Vicia spp.) honey and three samples were multifloral honeys., La autora de esta Memoria ha sido beneficiaria de una ayuda destinada a la contratación de personal técnico de apoyo a la investigación por las Universidades Públicas de Castilla y León, para jóvenes incluidos en el Sistema Nacional de Garantia Juvenil cofinanciadas por el Fondo Social Europeo y la Iniciativa de Empleo Juvenil convocada por Orden de 30 de noviembre de 2018, de la Consejería de Educación. El trabajo de investigación que ha dado lugar a esta Tesis Doctoral ha sido desarrollado en la Universidad de Burgos y ha sido financiado a través del proyecto BU041G18 de la Consejería de Educación de la Junta de Castilla y León.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Detection of SARS-CoV-2 Virus by Triplex Enhanced Nucleic Acid Detection Assay (TENADA)

  • Aviñó, Anna
  • Cuestas-Ayllón, Carlos
  • Gutiérrez-Capitán, Manuel
  • Vilaplana, Lluisa
  • Grazu, Valeria
  • Noé, Véronique
  • Balada, Eva
  • Baldi, Antonio
  • Félix, Alex J.
  • Aubets, Eva
  • Valiuska, Simonas
  • Domínguez, Arnau
  • Gargallo, Raimundo
  • Eritja, Ramon
  • Marco, M.-Pilar
  • Fernández-Sánchez, César
  • Martínez de la Fuente, Jesús
  • Ciudad, Carlos J.
SARS-CoV-2, a positive-strand RNA virus has caused devastating effects. The standard method for COVID diagnosis is based on polymerase chain reaction (PCR). The method needs expensive reagents and equipment and well-trained personnel and takes a few hours to be completed. The search for faster solutions has led to the development of immunological assays based on antibodies that recognize the viral proteins that are faster and do not require any special equipment. Here, we explore an innovative analytical approach based on the sandwich oligonucleotide hybridization which can be adapted to several biosensing devices including thermal lateral flow and electrochemical devices, as well as fluorescent microarrays. Polypurine reverse-Hoogsteen hairpins (PPRHs) oligonucleotides that form high-affinity triplexes with the polypyrimidine target sequences are used for the efficient capture of the viral genome. Then, a second labeled oligonucleotide is used to detect the formation of a trimolecular complex in a similar way to antigen tests. The reached limit of detection is around 0.01 nM (a few femtomoles) without the use of any amplification steps. The triplex enhanced nucleic acid detection assay (TENADA) can be readily adapted for the detection of any pathogen requiring only the knowledge of the pathogen genome sequence.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Fuel and acorns: Early Neolithic plant use from Cueva de Chaves (NE Spain)

  • Alcolea, Marta
  • Utrilla, Pilar
  • Piqué, Raquel
  • Laborda, Rafael
  • Mazo, Carlos
Cueva de Chaves is a particularly important archaeological site for the Early Neolithic of the northeast Iberian Peninsula. This study focuses on the archaeobotanical analysis of wood charcoals and charred fruits from two Neolithic levels dated from 5678 ± 50 to 5073 ± 107 cal BC. Charcoal analysis reveals the exploitation of firewood resources in different environments. A great variety of woody taxa and plant formations dominated by pines and oaks has been documented. The location of the archaeological site in a mid-mountain environment favors a mixed exploitation of resources in the valley and the mountains. Mesophytes indicate a relative humid environment where xerophytic and thermophilous trees and shrubs have an important presence. Taxonomic richness documented in the settlement provides an idea of long-term settling and development of diversified activities. The dramatic increase of colonizing secondary formations in the earliest level of occupation can only be explained by human intervention. According to pollen information human activity in the environment is well-documented since Early Neolithic that reveal the presence of several herbaceous plants (Plantago, Rumex, Chenopodiaceae, Asphodellus, etc). Among charred seeds we have only documented the presence of abundant and well-preserved acorns (Quercus sp.) but the presence of crops has not been attested just by indirect archaeological evidences.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

El dibujo de la figura humana como instrumento de la evaluación de danza creativa en personas con Alzheimer: estudio de caso, Human figure drawing as an instrument of evaluation of creative dance in individuals with Alzheimer's: a case study

  • Pérez Testor, Susana
  • Cabedo Sanromà, Josep
  • Barnet, Sílvia
  • Guerra-Balic, Myriam
  • Griñó Roca, Anna
  • Aceituno Martín, Pilar
  • Salvati Magini, Chiara
Presentamos un estudio de caso de una mujer de 89 años diagnosticada de Alzheimer, en un grado de deterioro cognitivo moderado-severo. Para realizar el estudio se utilizaron el test DAP-IQ (Reynolds & Hickman, 2004) y el test de la Persona del HTP (Buck 2008) con el objetivo de analizar la evolución del dibujo y el impacto de dos intervenciones de danza creativa en un intervalo de tres meses. Los resultados muestran que las puntuaciones disminuyen en los dos dibujos elaborados antes de la clase de danza creativa y que aumentan en los dos realizados inmediatamente después de la clase. A partir de estos resultados podemos concluir que el dibujo sin la intervención de la danza creativa tiende a desaparecer, mientras que en el dibujo elaborado después de la intervención de la danza creativa, aparecen partes del cuerpo dibujado que se habían omitido, tales como cabellos, cejas, nariz, cintura, ojos, piernas y pies., We are presenting a case study of an 89-year-old woman diagnosed with Alzheimer’s disease with a moderate-to-severe degree of cognitive deterioration. To conduct the study, the DAP-IQ test (Reynolds & Hickman, 2004) and the HTP test (Buck 2008) were used with the goal of analysing the development of drawing and the impact of two creative dance interventions in a three-month interval. The results show that the scores were lower on the two drawings made before the creative dance class and higher on the two made immediately after the class. Based on these results, we can conclude that without the creative dance intervention, drawing tends to disappear, while in the drawings made after the creative dance intervention, body parts that had been omitted tended to be drawn, such as hair, eyebrows, nose, waist, eyes, legs and feet., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Design and Validation of Probes and Sensors for the Characterization of Magneto-Ionic Radio Wave Propagation on Near Vertical Incidence Skywave Paths

  • Witvliet, Ben
  • Alsina-Pagès, Rosa Ma
  • van Maanen, Erik
  • Laanstra, Geert Jan
This article describes the design and validation of deployable low-power probes and sensors to investigate the influence of the ionosphere and the Earth’s magnetic field on radio wave propagation below the plasma frequency of the ionosphere, known as Near Vertical Incidence Skywave (NVIS) propagation. The propagation of waves that are bent downward by the ionosphere is dominated by a bi-refractive mechanism called ‘magneto-ionic propagation’. The polarization of both downward waves depends on the spatial angle between the Earth’s magnetic field and the direction of propagation of the radio wave. The probes and sensors described in this article are needed to simultaneously investigate signal fading and polarization dynamics on six radio wave propagation paths. The 1-Watt probes realize a 57 dB signal-to-noise ratio. The probe polarization is controlled using direct digital synthesis and the cross-polarization is 25–35 dB. The intermodulation-free dynamic range of the sensor exceeds 100 dB. Measurement speed is 3000 samples/second. This publication covers design, practical realization and deployment issues. Research performed with these devices will be shared in subsequent publications.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Polarization diversity in a long-haul transequatorial HF link from Antarctica to Spain

  • Bergada, Pau
  • Alsina-Pagès, Rosa Ma
  • Hervás, Marcos
This paper describes a set of experiments which examine the feasibility of applying polarization diversity to a 12,760 km ionospheric link from Livingston Island (62.6°S, 60.4°W), South Shetlands, to Cambrils (41.0°N, 1.0°E), Spain. A transmitting monopole and both a monopole and a dipole (inverted‐V) at reception are the antennas used in this measurement campaign. Receiving antennas are orthogonal polarized to check whether wave polarization rotation causes differences between simultaneous signals. The results gathered in the paper indicate that there is a marked difference between simultaneous signals at vertical and horizontal polarized antennas, which depends on the hour of the day and the signal frequency. In this low‐throughput HF data link, polarization diversity could be used to increase SNR and performance through smart combination of receiving signals, due to the low cross‐correlation factor between them
Docta Complutense
Publicación Artículo científico (JournalArticle)

Aeolian construction and alluvial dismantling of a faultbounded intracontinental aeolian dune field (Teruel Basin, Spain): a continental perspective on late Pliocene climate change and variability

  • Rodríguez López, Juan P.
  • Liesa, Carlos L.
  • Dam, Jan van
  • Lafuente, Paloma
  • Ezquerro Ruiz, Lope
  • Arlegui, Luis E.
  • Boer, Poppe de
An aeolian dune field migrating to the east encroached on the toes of alluvial fans in the Teruel Basin (eastern Spain) during a short interval in the Late Pliocene (ca 2·9 to 2·6 Ma), when Northern Hemisphere glaciation and strong glacial–interglacial cycles began. Preservation of the dune field was controlled by syn-sedimentary activity of a normal fault. Ephemeral water discharge eroded aeolian sands and formed V-shaped channels in which aeolian sandstone blocks accumulated. The incorporation of loose aeolian sand in wadi waters modified the sediment/water ratio, changing the physical properties of the flows as they penetrated the aeolian dune field. The erosion and cover of aeolian dune foresets by sheetflood deposits suggest that dune-damming caused the intermittent ponding of water behind the dunes and its flashy release. The arid climate in the Late Pliocene western Mediterranean realm favoured the transport of windblown sediments from northern Africa and western Mediterranean land masses into the Mediterranean. The formation of the studied aeolian dune field (2·9 to 2·6 Ma) and possibly others (for example, the Atacama, Namib and Sahara deserts) correlates with a strong increase of the influence of obliquity, which can be attributed to the combination of a regional expression related to the reduced effect of precession due to a minimum in the long-period (2·3 Ma) eccentricity cycle and a remote expression of the onset of the Northern Hemisphere glaciation.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Unforeseen plant phenotypic diversity in a dry and grazed world

  • Gross, Nicolas
  • Maestre, Fernando T.
  • Liancourt, Pierre
  • Berdugo Vega, Miguel
  • Martin, Raphaël
  • Gozalo, Beatriz
  • Valencia Gómez, Enrique
  • Sánchez Pescador, David
  • Gallego Rubalcaba, Juan Vicente
  • López Teixido, Alberto
  • Le Bagousse-Pinguet, Yoann
Earth harbours an extraordinary plant phenotypic diversity1 that is at risk from ongoing global changes2,3. However, it remains unknown how increasing aridity and livestock grazing pressure—two major drivers of global change4,5,6—shape the trait covariation that underlies plant phenotypic diversity1,7. Here we assessed how covariation among 20 chemical and morphological traits responds to aridity and grazing pressure within global drylands. Our analysis involved 133,769 trait measurements spanning 1,347 observations of 301 perennial plant species surveyed across 326 plots from 6 continents. Crossing an aridity threshold of approximately 0.7 (close to the transition between semi-arid and arid zones) led to an unexpected 88% increase in trait diversity. This threshold appeared in the presence of grazers, and moved toward lower aridity levels with increasing grazing pressure. Moreover, 57% of observed trait diversity occurred only in the most arid and grazed drylands, highlighting the phenotypic uniqueness of these extreme environments. Our work indicates that drylands act as a global reservoir of plant phenotypic diversity and challenge the pervasive view that harsh environmental conditions reduce plant trait diversity8,9,10. They also highlight that many alternative strategies may enable plants to cope with increases in environmental stress induced by climate change and land-use intensification.
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

El artesonado del refectorio del Monasterio de Uclés, Cuenca: análisis geométrico y constructivo

  • Miguel Sánchez, Manuel de|||0000-0002-1803-2428
  • Fernández Cabo, Miguel Carlos|||0000-0002-3393-2774
  • González Uriel, Ana|||0000-0001-8511-6720
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Snail1 expression is required for sarcomagenesis

  • Alba Castellón, Lorena|||0000-0003-3449-7820
  • Batlle, Raquel
  • Francí, Clara
  • Fernández-Aceñero, María J.
  • Mazzolini, Rocco|||0000-0003-3249-8387
  • Peña, Raúl|||0000-0002-1650-9720
  • Loubat, Jordina
  • Alameda, Francesc|||0000-0002-7302-6901
  • Rodríguez, Rufo
  • Curto Navarro, Josué|||0000-0003-4300-4282
  • Albanell Mestres, Joan|||0000-0003-1239-4580
  • Muñoz, Alberto|||0000-0003-3890-4251
  • Bonilla, Félix
  • Ignacio Casal, J.
  • Rojo, Federico|||0000-0001-9989-0290
  • Garcia de Herreros, Antonio|||0000-0001-5270-0808
Snail1 transcriptional repressor is a major inducer of epithelial-to mesenchymal transition but is very limitedly expressed in adult animals. We have previously demonstrated that Snail1 is required for the maintenance of mesenchymal stem cells (MSCs), preventing their premature differentiation. Now, we show that Snail1 controls the tumorigenic properties of mesenchymal cells. Increased Snail1 expression provides tumorigenic capabilities to fibroblastic cells; on the contrary, Snail1 depletion decreases tumor growth. Genetic depletion of Snail1 in MSCs that are deficient in p53 tumor suppressor downregulates MSC markers and prevents the capability of these cells to originate sarcomas in immunodeficient SCID mice. Notably, an analysis of human sarcomas shows that, contrarily to epithelial tumors, these neoplasms display high Snail1 expression. This is particularly clear for undifferentiated tumors, which are associated with poor outcome. Together, our results indicate a role for Snail1 in the generation of sarcomas.
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

A variable-length chromosome genetic algorithm to solve a road traffic coordination multipath problem

  • Cruz Piris, Luis de la|||0000-0002-9570-2851
  • Marsá Maestre, Iván|||0000-0002-5529-2851
  • López Carmona, Miguel Ángel|||0000-0001-9228-1863
The problems related to traffic coordination in intersections are quite common in large cities. Current solutions are based on the utilization of static priorities (i.e. yield signs), on variable signaling like traffic lights, or even on the physical modification of the road structures by transforming intersections in roundabouts. The emergence, evolution, and consolidation of technologies that enable the paradigm of connected and autonomous vehicles have allowed the development of new solutions where the vehicles' coordination follow a preset path without stopping when entering the intersections. In this work, we propose using a genetic algorithm with variable-length chromosomes to solve the vehicle coordination multipath problem in intersections. The proposed algorithm is focused on optimizing the vehicles' arrival sequencing according to preset flow rates. While other solutions assume the same flow rates in every branch of the intersection, in our proposal the traffic flows can be asymmetric. We extend one of the existent intersection models, based on fixed paths, to allow multiple paths. This means that each vehicle can go from any input point to any output branch in the intersection. Moreover, we have designed specific selection, crossover and mutation operators, and a new methodology to carry out the crossover function between different sized individuals, which are adapted to the specific peculiarities of the problem. Our proposal has been validated by carrying out tests using input data with known solutions and with random data. The results have been compared with systems based on other optimizers, obtaining improved results in the fitness outcome up to 9.1%, and up to 126% in computation time., Ministerio de Economía y Competitividad, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

A Hexagonal Pattern in the Paraninfo at the Universidad de Alcalá

  • Miguel Sánchez, Manuel de|||0000-0002-1803-2428
  • González Duque, Carlos|||0000-0002-8686-5085
  • Chías Navarro, Pilar|||0000-0001-6686-8820
  • Abad Balboa, Tomás|||0000-0001-9225-0709
In the sixteenth century, the assembly hall, or Paraninfo, at the recently inaugurated Universidad de Alcala. was known as the pieça del theatro. This study focuses on the layouts and proportions designed for this hall, which could be the key to understanding the whole project as a Renaissance theater that was singularly inspired by Roman models. Specifically, the hexagonal pattern of the coffered ceiling represents a genuine formal exploration in comparison with other wooden ceilings having similar geometric bases. All this led us to study this uncommon masterpiece as a proposal for a new model toward an intellectual and architectural recovery of the Antiquity, in the core of the Universidad, conceived for the representation of academic ceremonies and humanistic theater., Research funded by Comunidad de Madrid/Universidad de Alcalá, Project CM/JIN/2019-041, IP: Manuel De Miguel Sánchez.
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

El artesonado del refectorio del Monasterio de Uclés, Cuenca: análisis geométrico y constructivo, The coffered ceiling of the refectory of the Monastery of Uclés, Cuenca: geometric and constructive analysis

  • Miguel Sánchez, Manuel de|||0000-0002-1803-2428
  • Fernández Cabo, Miguel Carlos
  • González Uriel, Ana
Muchos artesonados castellanos del siglo XVI combinan la tradición carpintera hispana con la introducción de los casetones poligonales, propios del Renacimiento, formando estructuras con varios paños. Esta forma poliédrica genera una impresión de mayor profundidad y confiere más dignidad al espacio, pero complica notablemente su construcción. Hay que recordar que en el resto de Europa estas estructuras renacentistas presentaban la cara inferior horizontal. La conjunción de ambas condiciones, polígonos planos y techo de varias caras, genera la necesidad de buscar soluciones geométricas imaginativas en sus rincones. El techo del salón principal del Monasterio de Uclés es un artesonado renacentista formado por octógonos y cuadrados. Este patrón cubre tanto el plano horizontal como los cuatro planos laterales inclinados. Sin embargo, para resolver los rincones, el diseñador introduce unos hexágonos que conectan con elegancia los octógonos adyacentes. Esta investigación pone en contexto y analiza la definición de esta solución única, Many 16th-century Castilian coffered ceilings combine a long tradition of Hispanic carpentry with the introduction of polygonal coffers, typical of the Renaissance period. In addition, these structures are made up of several panels. This polyhedral shape creates an impression of greater depth and enhances the elegance of the space. However, it considerably complicates its construction. It must be borne in mind that in the rest of Europe these Renaissance structures are horizontal. The combination of flat polygons and multi-sided ceilings requires imaginative geometric solutions to render its corners. The ceiling of the main hall of the Monastery of Uclés is a Renaissance coffered ceiling made up of octagons and squares. This pattern covers both the flat and the pitched panels. In this case, the designer has inserted hexagons that connect adjacent octagons to render each of the corners. This research studies the context and analyzes the definition of this unique solution., Este trabajo ha sido desarrollado dentro del proyecto de investigación CM/JIN/2019-041, financiado por la Comunidad de Madrid y La Universidad de Alcalá.
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Fuzzy ontology-based system for driver behavior classification

  • Fernández Melián, Susel|||0000-0002-1576-4340
  • Ito, Takayuki
  • Cruz Piris, Luis De La|||0000-0002-9570-2851
  • Marsá Maestre, Iván|||0000-0002-5529-2851
Intelligent transportation systems encompass a series of technologies and applications that exchange information to improve road traffic and avoid accidents. According to statistics, some studies argue that human mistakes cause most road accidents worldwide. For this reason, it is essential to model driver behavior to improve road safety. This paper presents a Fuzzy RuleBased System for driver classification into different profiles considering their behavior. The system?s knowledge base includes an ontology and a set of driving rules. The ontology models the main entities related to driver behavior and their relationships with the traffic environment. The driving rules help the inference system to make decisions in different situations according to traffic regulations. The classification system has been integrated on an intelligent transportation architecture. Considering the user's driving style, the driving assistance system sends them recommendations, such as adjusting speed or choosing alternative routes, allowing them to prevent or mitigate negative transportation events, such as road crashes or traffic jams. We carry out a set of experiments in order to test the expressiveness of the ontology along with the effectiveness of the overall classification system in different simulated traffic situations. The results of the experiments show that the ontology is expressive enough to model the knowledge of the proposed traffic scenarios, with an F1 score of 0.9. In addition, the system allows proper classification of the drivers? behavior, with an F1 score of 0.84, outperforming Random Forest and Naive Bayes classifiers. In the simulation experiments, we observe that most of the drivers who are recommended an alternative route experience an average time gain of 66.4%, showing the utility of the proposal., Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

A minimal model coupling communicable and non-communicable diseases

  • Marvá Ruiz, Marcos|||0000-0003-4703-8615
  • Venturino, Ezio
  • Vera García, María del Carmen|||0000-0003-0674-4089
This work presents a model combining the simplest communicable and non-communicable disease models. The latter is, by far, the leading cause of sickness and death in the World, and introduces basal heterogeneity in populations where communicable diseases evolve. The model can be interpreted as a risk-structured model, another way of accounting for population heterogeneity. Our results show that considering the non-communicable disease (in the end, a dynamic heterogeneous population) allows the communicable disease to become endemic even if the basic reproduction number is less than 1. This feature is known as subcritical bifurcation. Furthermore, ignoring the non-communicable disease dynamics results in overestimating the basic reproduction number and, thus, giving wrong information about the actual number of infected individuals. We calculate sensitivity indices and derive interesting epidemic-control information., Agencia Estatal de Investigación, Ministerio de Economía y Competitividad, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Modeling interference on interference competition models

  • Vera García, María del Carmen|||0000-0003-0674-4089
  • Marvá Ruiz, Marcos|||0000-0003-4703-8615
  • Escalante Fernández, René Gregorio|||0000-0002-6816-3557
  • García Garrido, Víctor José|||0000-0003-0557-3193
XXV Mathematical Modelling in Engineering & Human Behaviour 2023 Conference, 11/07/2023-14/07/2023, Valencia, España., Paradoxically, prior interference competition models did not account for the effect of both intra- and inter-species interference. We do so by adapting the works of Beddington and DeAngelis on predator-prey models to the classical Gause interference competition model. The established theory estates that global species coexistence (i.e., regardless of the initial amount of individuals) is only possible, roughly, when the ratio of the inter-species effects over the intra-species effects is less than 1. This feature was intended to support the Gause's Competitive Exclusion Principle (two species competing for the same resource can not -hardly- coexist) and the Coexistence Paradox (this hypothesis is at odds with Nature). We have found that taking into account intra-species interference in competition allows competing species to global coexistence even if the above mentioned ratio is larger than 1. This feature was not allowed in previous works on interference competition that introduced herd-type behavior, the time spent in competition or group defense. We have also found multi-stability scenarios not allowed by the classical model [8] but found in the above mentioned references which, in turn, here are feasible in a wider range of the parameters space due exclusively to intra-species interference when competing heterospecifics. Therefore, accounting for interference contributes to unveil the Paradox of coexistence., Universidad de Alcalá