Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 791
Encontrada(s) 8 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Música Visual: de los órganos de color a los primeros ordenadores, Visual music: from the color organs to the first computers

  • García Miragall, Carlos Manuel|||0000-0003-2067-3598
  • Sanmartin Piquer, Francisco Javier|||0000-0002-6596-2644
  • Gracia Bensa, Trinidad
[EN] The idea of obtaining images from music has been treated over the centuries; not as an independent movement but always within the cultural and technological context of each era. This historical effort can be grouped into what has come to be called Visual Music, Sound Visualization or Visual Sound that bases its nature on the notion of synesthesia (Brougher 2005).The field of Visual Music has always been marked by the technological media involved in the creation of images. In this work, we conducted a historical review of some of the contributions that we consider most relevant, focusing on the relationship between technology and art. Our historical review begins with the first intuitions of the Greek philosophers to relate colour and sound and ends at the beginning of the digital age., [ES] La idea de obtener imágenes a partir de la música ha sido tratada a lo largo de los siglos; no como un movimiento independiente sino siempre dentro del contexto cultural y tecnológico de cada época. Este esfuerzo histórico se puede agrupar en lo que se ha venido a denominar Música Visual, Visualización del Sonido o Sonido Visual que fundamenta su naturaleza en la noción de sinestesia (Brougher 2005). El campo de la Música Visual siempre ha estado marcado por los medios tecnológicos involucrados en la creación de imágenes. En este trabajo realizamos una revisión histórica de algunas de las aportaciones que consideramos más relevantes centrándonos en las relaciones entre tecnología y arte. Nuestro repaso se inicia con las primeras intuiciones de los filósofos griegos de relacionar color y sonido y termina en los inicios de la era digital., Este trabajo es resultado del proyecto de investigación de la Universitat Politècnica de València financiado por la Generatitat Valenciana con referencia GV/2017/028
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Knowledge network dynamics in clusters: past performance and absorptive capacity

  • Belso Martínez, José Antonio
  • Expósito-Langa, Manuel|||0000-0001-7707-7354
  • Tomás-Miquel, José-Vicente|||0000-0002-5053-935X
Purpose - The purpose of this paper is to explore the degree to which absorptive capacity and previous innovative performance affect network dynamics, specifically in the creation or destruction of inter-business relationships. Design/methodology/approach - The empirical study has drawn on the data collected in an industrial cluster located in the Valencian Community in Spain. This population of firms allowed us to test various roles played by network endogenous forces, absorptive capacity and former performance in the creation and dissolution of inter-organisational linkages. The authors followed an evolutionary approach and applied network analysis techniques. Findings - Empirical evidences suggest that absorptive capacity and previous innovative performance are predictors of inter-business relationships. Absorptive capacity affects the emergence of linkages in the technological network, due to the tacit nature of technological knowledge. On the other hand, previous innovative performance is an indicator to identify leaders companies. These companies tend to increase the reception of request for advice from local firms. Moreover, prestigious companies tend to be more selective in choosing collaborators. Practical implications - This study helps researchers and managers better understand network dynamics. The generation of inter-organisational relationships in clusters can be determined by cognitive proximity and prestigious status in the network. These evidences are relevant in a mature cluster where knowledge is asymmetrically distributed. Originality/value - Over the last few decades, studies on industrial clusters have evolved from the "canonical" standpoint. Nowadays, researchers usually take a more sophisticated and richer view of this reality, mainly as a consequence of the inclusion the proximity concept, intra-cluster heterogeneity and advanced analysis of overlapping between networks and territory. Thus, the authors try to add some empirical evidence along these lines., Financial support from the Spanish Ministry of Economy and Competitiveness (ECO2015-67122-R) and the Generalitat Valenciana (GV/2015/079) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Análisis del ciclo de vida de la gestión de hidrocarburos residuales, Life cycle assessment of hydrocarbon waste management

  • Pacheco-Blanco, Bélgica|||0000-0002-3955-660X
  • Artacho Ramírez, Miguel Ángel|||0000-0001-8513-6414
  • Cloquell Ballester, Victor Andres|||0000-0002-4698-4434
  • Artorga-Mendoza, F.
[EN] The waste generated by vessels has a great impact on the marine environment. Consequently, a series of laws and conventions related to its management have been established, which tend to avoid constant degradation and minimizing adverse effects. In this sense, the Annex I of MARPOL convention classifies waste generated by ships or cargo residues of crude oil and ballast water contaminated with crude oil. Among these wastes, the hydrocarbons from bilges and tank washing are of special interest due to their danger to the marine environment, their abundance and their ease of recovery. The aim of this work is to analyze the current environmental impact of hydrocarbon management in a seaport. For this purpose, the Life Cycle Assessment methodology is used. The conclusions obtained help us to propose some improvements for recovery and management of hydrocarbons., [ES] Los residuos generados por las embarcaciones provocan un gran impacto en el medio marino. Por consiguiente, se han establecido una serie de leyes y convenios relacionados con su gestión, que tienden a evitar la constante degradación y minimizar los efectos adversos. En este sentido, el convenio MARPOL clasifica en el anexo I, los desechos generados por buques o residuos de carga de petróleo crudo y agua de lastre contaminada con petróleo crudo. Entre estos desechos, los hidrocarburos provenientes de las sentinas y el lavado de tanques tienen especial interés por su peligrosidad para el medio marino, su abundancia y por su facilidad de recuperación. El objetivo de este trabajo es conocer el impacto ambiental actual de la gestión de hidrocarburos en un puerto marítimo. Con este fin, se utiliza la metodología de Análisis del Ciclo de Vida. Las conclusiones obtenidas, permiten proponer futuros escenarios de recuperación y gestión de hidrocarburos., El trabajo se ha realizado en el marco del proyecto IDENTIFICACIÓN Y ANÁLISIS AMBIENTAL Y ECONÓMICO DE LAS ACTIVIDADES DE MAYOR POTENCIAL DE SIMBIOSIS ENTRE LAS EMPRESAS QUE COMPONEN VALENCIAPORT subvencionado por la Generalitat Valenciana para la realización de proyectos I+D+i desarrollados por grupos de investigación emergentes (GV), con referencia GVA/2020/217.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Advanced teleoperation and control system for industrial robots based on augmented virtuality and haptic feedback

  • González, Claudia
  • Girbés-Juan, Vicent
  • Solanes, J. Ernesto|||0000-0001-5011-4872
  • Muñoz García, Adolfo|||0000-0003-2435-3348
  • Gracia Calandin, Luis Ignacio|||0000-0001-9258-9286
  • Tornero Montserrat, Josep|||0000-0003-1571-0251
[EN] There are some industrial tasks that are still mainly performed manually by human workers due to their complexity, which is the case of surface treatment operations (such as sanding, deburring, finishing, grinding, polishing, etc.) used to repair defects. This work develops an advanced teleoperation and control system for industrial robots in order to assist the human operator to perform the mentioned tasks. On the one hand, the controlled robotic system provides strength and accuracy, holding the tool, keeping the right tool orientation and guaranteeing a smooth approach to the workpiece. On the other hand, the advanced teleoperation provides security and comfort to the user when performing the task. In particular, the proposed teleoperation uses augmented virtuality (i.e., a virtual world that includes non-modeled real-world data) and haptic feedback to provide the user an immersive virtual experience when remotely teleoperating the tool of the robot system to treat arbitrary regions of the workpiece surface. The method is illustrated with a car body surface treatment operation, although it can be easily extended to other surface treatment applications or even to other industrial tasks where the human operator may benefit from robotic assistance. The effectiveness of the proposed approach is shown with several experiments using a 6R robotic arm. Moreover, a comparison of the performance obtained manually by an expert and that obtained with the proposed method has also been conducted in order to show the suitability of the proposed approach., This research was founded by the Spanish Government and the Generalitat Valenciana under Grants PID2020-117421RB-C21 and GV/2021/005
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Lectin-gated and glycan functionalized mesoporous silica nanocontainers for targeting cancer cells overexpressing Lewis X antigen

  • Bhat, Ravishankar
  • García, I.
  • Arnáiz, B.
  • Liz-Marzán, L.M.
  • Penadés, S.
  • Aznar, Elena|||0000-0003-0361-3876
  • Martínez-Bisbal, M.Carmen|||0000-0002-8526-4413
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
[EN] Gated mesoporous silica nanoparticles can deliver payload upon the application of a predefined stimulus, and therefore are promising drug delivery systems. Despite their important role, relatively low emphasis has been placed on the design of gating systems that actively target carbohydrate tumor cell membrane receptors. We describe herein a new Lewis X (Le(x)) antigen-targeted delivery system comprising mesoporous silica nanoparticles (MSNs) loaded with ATTO 430LS dye, functionalized with a Le(x) derivative (1) and capped with a fucose-specific carbohydrate-binding protein (Aleuria aurantia lectin (AAL)). This design takes advantage of the affinity of AAL for Le(x) overexpressed receptors in certain cancer cells. In the proximity of the cells, AAL is detached from MSNs to bind Le(x), and selectins in the cells bind Le(x) in the gated MSNs, thereby inducing cargo delivery. Gated MSNs are nontoxic to colon cancer DLD-1 cells, and ATTO 430LS dye delivered correlated with the amount of Le(x) antigen overexpressed at the DLD-1 cell surface. This is one of the few examples of MSNs using biologically relevant glycans for both capping (via interaction with AAL) and targeting (via interaction with overexpressed Le(x) at the cell membrane)., The authors thank the Spanish Government (Projects MAT2015-64139-C4-1-R and MAT2013-46101-R (MINECO/ FEDER)), Fondo de Investigacion Sanitaria (PI15/00480) and Generalitat Valenciana (Project PROMETEOII/2014/047 and project GVA/2014/13) for support. R. B. is thankful to Svagata. Eu (Erasmus Mundus Action-II program) for his fellowship. The authors also thank the Electron Microscopy Service at the UPV for support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Use of Volcanic Powder as a Cement Replacement for the Development of Sustainable Mortars

  • Letelier, Viviana
  • Ortega, José Marcos
  • Tremiño, Rosa Maria
  • Henriquéz-Jara, Bastián I.
  • Fustos, Ivo
  • Moriconi, Giacomo
  • Climent, Miguel Ángel
  • Sánchez, Isidro
  • Real-Herraiz, Teresa Pilar|||0000-0003-2578-2902
[EN] Currently, reduction of environmental effects of the cement industry is an issue of global interest and one of the alternatives is to replace clinker with additions such as volcanic powder. The purpose of this work is to study the influence of up to 400 hardening days of volcanic powder, obtained from the last eruption of the Calbuco volcano (Chile), on the pore structure, mechanical performance, and durability-related properties of mortars which incorporate up to 20% volcanic powder as a substitution for clinker. In addition, an evaluation of greenhouse gases emissions was performed in order to quantify the possible environmental benefits of incorporating the volcanic powder in the mortars. The results obtained indicated that mortars with contents of 10% and 20% of volcanic powder had adequate service properties and improved all durability-related properties overall as compared with those noted for ordinary Portland cement. Additionally, the use of up to 20% volcanic powder makes it possible to reduce the CO2 emissions of mortars by almost 20%, demonstrating the advantages of incorporating this addition in mortars., This research was funded by the Universidad de La Frontera (Chile) (grant code DI19-0019, project entitled "Desarrollo de una dosificacion de morteros con baja conductividad termica para utilizar en prefabricados"), by the Conselleria de Educacion, Investigacion, Cultura y Deporte (at present renamed as Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital) de la Generalitat Valenciana (Spain) (grant code GV/2019/070), by the Spanish Agencia Estatal de Investigacion (grant code BIA2016-80982-R) and by the European Regional Development Fund (grant code BIA2016-80982-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrophysiological and Structural Remodeling in Heart Failure Modulate Arrhythmogenesis. 1D Simulation Study

  • Gómez García, Juan Francisco
  • Cardona, Karen
  • Romero Pérez, Lucia|||0000-0003-4605-8630
  • Ferrero De Loma-Osorio, José María|||0000-0003-4200-9225
  • Trenor Gomis, Beatriz Ana|||0000-0001-9166-6112
Background: Heart failure is a final common pathway or descriptor for various cardiac pathologies. It is associated with sudden cardiac death, which is frequently caused by ventricular arrhythmias. Electrophysiological remodeling, intercellular uncoupling, fibrosis and autonomic imbalance have been identified as major arrhythmogenic factors in heart failure etiology and progression. Objective: In this study we investigate in silico the role of electrophysiological and structural heart failure remodeling on the modulation of key elements of the arrhythmogenic substrate, i.e., electrophysiological gradients and abnormal impulse propagation. Methods: Two different mathematical models of the human ventricular action potential were used to formulate models of the failing ventricular myocyte. This provided the basis for simulations of the electrical activity within a transmural ventricular strand. Our main goal was to elucidate the roles of electrophysiological and structural remodeling in setting the stage for malignant life-threatening arrhythmias. Results: Simulation results illustrate how the presence of M cells and heterogeneous electrophysiological remodeling in the human failing ventricle modulate the dispersion of action potential duration and repolarization time. Specifically, selective heterogeneous remodeling of expression levels for the Na+ /Ca2+ exchanger and SERCA pump decrease these heterogeneities. In contrast, fibroblast proliferation and cellular uncoupling both strongly increase repolarization heterogeneities. Conduction velocity and the safety factor for conduction are also reduced by the progressive structural remodeling during heart failure. Conclusion: An extensive literature now establishes that in human ventricle, as heart failure progresses, gradients for repolarization are changed significantly by protein specific electrophysiological remodeling (either homogeneous or heterogeneous). Our simulations illustrate and provide new insights into this. Furthermore, enhanced fibrosis in failing hearts, as well as reduced intercellular coupling, combine to increase electrophysiological gradients and reduce electrical propagation. In combination these changes set the stage for arrhythmias., This work was partially supported by (i) the "VI Plan Nacional de Investigacion Cientifica, Desarrollo e Innovacion Tecnologica" from the Ministerio de Economia y Competitividad of Spain (grant number TIN2012-37546-C03-01) and the European Commission (European Regional Development Funds - ERDF - FEDER), (ii) the Direccion General de Politica Cientifica de la Generalitat Valenciana (grant number GV/2013/119), and (iii) Programa Prometeo (PROMETEO/2012/030) de la Conselleria d'Educacio Formacio I Ocupacio, Generalitat Valenciana. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A mesoscale model application to fire weather winds

  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
  • Estrela, María José
  • Millán, Millán M.
[EN] In this work, a mesoscale model has been used to simulate the wind flow in a real fire situation in the Spanish Mediterranean basin in July 1991. The model simulation results for the wind field are shown, and compared to the fire evolution, and to some real observations taken in the area during the fire event. The most important conclusion is that, in spite of the presence of the fire, the mesoscale model was still able to predict the local winds accurately without taking the fire heating processes into account., This research was supported by the Generalitat Valenciana, contract number GV-2317/94 and GV97-RN-14-12. The authors would like to thank Rosa Salvador and Louie Grasso for many useful discussions about the RAMS model. The authors also thank Rafael Currás, for providing us with the burned area contour and some information about the fire evolution. The ECMWF data sets have been provided by the INM (Instituto Nacional de Meteorología, Ministerio de Medio Ambiente, Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Functionalization of polyethylene with hydrolytically-stable ester groups

  • Hervàs-Arnandis, Susi
  • Oliver-Meseguer, Judit|||0000-0003-1555-3583
  • Leyva Perez, Antonio|||0000-0003-1063-5811
  • Palomar-De Lucas, Brenda
  • Bilanin-Artigado, Cristina
  • Mingueza-Verdejo, Paloma
  • Viciano, Mónica
[EN] Low-density (LD) and high-density polyethylene (HDPE), recycled or not, incorporates up to 7 wt% of ester groups after reacting either with ethyl diazoacetate (EDA) under catalytic and solvent free-reaction conditions, or with maleic anhydride (MA) and acrylates (AC) under catalytic radical conditions. The resulting upcycled polyethylene esters are hydrolytically stable at extreme pH (0-14) and can be further transformed into carboxylic acids, carboxylates, other esters and amides., Financial support by the projects PID2020-115100GB-I00 and TED2021-130465B-I00 (funded by Spanish MCIINN, MCIN/AEI/10.13039/501100011033MICIIN) is acknowledged. The work has also been funded by Generalitat Valenciana, Grupos Emergentes (GV/2021/138). AIMPLAS author thanks Instituto Valenciano de Competitividad Empresarial (IVACE) the founding from the project IMAMCA/2023/4. AIMPLAS and ITQ authors thank Agencia Valenciana d'Innovacio (AVI) and the European Union the founding of the project INNEST/2022/18. J. O.-M. acknowledges the Juan de la Cierva program for the concession of a contract (IJC2018-036514-I). S. H.-A, and C. B. and P. M.-V. thank ITQ, UPV-CSIC for the concession of a contract (FPI-2022-S2-42040 and PAID 01-20, respectively).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

First-principles design of highly active and selective catalysts for phosgene-free synthesis of aromatic polyurethanes

  • Laursen ., Siris Odin
  • Cómbita Merchán, Diego Fernando
  • Hungría, Ana B.
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
We thank the Generalitat Valenciana (GV/2009/063 and PROM-ETEO 2088/130) and the Spanish MICINN (MAT2011-28009, and Consolider Ingenio 2010-MULTICAT: CSD2009-00050) for financial support. We thank Red Espanola de Supercomputacion (RES) for computational resources. D.C. thanks Spanish MICINN for a postgraduate scholarship, and S.L. thanks ITQ for a post-doctoral fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hole distribution in phononic crystals: design and optimization

  • Romero-García, Vicente|||0000-0002-3798-6454
  • Sánchez Pérez, Juan Vicente|||0000-0002-4473-8782
  • García-Raffi, L. M.|||0000-0003-3985-8453
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Blasco, Xavier|||0000-0002-9737-2833
  • García Nieto, Susana
An exhaustive study has been made into the potential improvement in attenuation and focusing of phononic crystal arrays resulting from the deliberate creation of vacancies. Use is made of a stochastic search algorithm based on evolutionary algorithms called the epsilon variable multi-objective genetic algorithm which, in conjunction with the application of multiple scattering theory, enables the design of devices for effectively controlling sound waves. Several parameters are analyzed, including the symmetries used in the distribution of holes and the optimum number of holes. The validity and utility of the general rules obtained have been confirmed experimentally., This work was partially supported by MEC (Spanish Government) and FEDER funds: Project Nos. 419DPI2005-07835, and MAT2006-03097 and Generalitat Valenciana Project Nos. GV06/026 and 420 GV/2007/191. The authors would like to thank John Rawlins (associate member of the Institute of Translation and Interpreting (No. 9743) of UK, and "Certified PRO" of ProZ according to the EN 15038) for his help with the use of English.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On right K-completeness of the fine quasi-uniformity

  • Pérez Peñalver, María José|||0000-0003-0403-1405
  • Romaguera Bonilla, Salvador|||0000-0001-7857-6139
[EN] We investigate right K-components of the fine quasi-uniformity. It follows from our results the somewhat surprising fact that if (X,T) is a topological space condensable onto a quasi-metric space whose conjugate is Hausdorff, then any right K-Cauchy filter F on the fine quasi-uniformity of (X,T) is trivial (i.e. there is an x €X such that {x} generates F., The second author acknowledges the support of the Conselleria de Educació i Ciencia, Generalitat Valenciana, gran GV-2223/94
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Three-dimensional cardiac computational modelling: methods, features and applications

  • López Pérez, Alejandro Daniel
  • Sebastián Aguilar, Rafael
  • Ferrero De Loma-Osorio, José María|||0000-0003-4200-9225
[EN] The combination of computational models and biophysical simulations can help to interpret an array of experimental data and contribute to the understanding, diagnosis and treatment of complex diseases such as cardiac arrhythmias. For this reason, three-dimensional (3D) cardiac computational modelling is currently a rising field of research. The advance of medical imaging technology over the last decades has allowed the evolution from generic to patient-specific 3D cardiac models that faithfully represent the anatomy and different cardiac features of a given alive subject. Here we analyse sixty representative 3D cardiac computational models developed and published during the last fifty years, describing their information sources, features, development methods and online availability. This paper also reviews the necessary components to build a 3D computational model of the heart aimed at biophysical simulation, paying especial attention to cardiac electrophysiology (EP), and the existing approaches to incorporate those components. We assess the challenges associated to the different steps of the building process, from the processing of raw clinical or biological data to the final application, including image segmentation, inclusion of substructures and meshing among others. We briefly outline the personalisation approaches that are currently available in 3D cardiac computational modelling. Finally, we present examples of several specific applications, mainly related to cardiac EP simulation and model-based image analysis, showing the potential usefulness of 3D cardiac computational modelling into clinical environments as a tool to aid in the prevention, diagnosis and treatment of cardiac diseases., This work was partially supported by the "VI Plan Nacional de Investigacion Cientifica, Desarrollo e Innovacion Tecnologica" from the Ministerio de Economia y Competitividad of Spain (TIN2012-37546-C03-01 and TIN2011-28067) and the European Commission (European Regional Development Funds - ERDF - FEDER) and by "eTorso project" (GVA/2013-001404) from the Generalitat Valenciana (Spain). ALP is financially supported by the program "Ayudas para contratos predoctorales para la formacion de doctores" from the Ministerio de Economia y Competitividad of Spain (BES-2013-064089).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of annealing atmosphere on photoelectrochemical response of TiO2 nanotubes anodized under controlled hydrodynamic conditions

  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • García-García, D.M.|||0000-0001-8951-4558
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Solsona, B.
  • Sánchez-Tovar, R.
  • Fernández Domene, R.M.
[EN] The influence of three annealing atmospheres (air, nitrogen and argon) and the use of controlled hydrodynamic conditions (from 0 to 5000 rpm) on morphological, structural, chemical and photoelectrochemical properties of TiO2 nanotubes have been evaluated. For this purpose, different characterization techniques have been used: Field Emission Scanning Electron Microscopy, Raman Confocal Laser Spectroscopy, X-Ray Diffraction, X-Ray Photoelectron Spectroscopy, Incident Photon-to-electron Conversion Efficiency measurements, ultraviolet-visible absorption spectra, Mott-Schottky analysis and photoelectrochemical water splitting tests. According to the results, it can be concluded that both hydrodynamic conditions and annealing in non-oxidizing atmospheres improve the photoelectrochemical response of the TiO2 nanotubes. This fact has been attributed to the oxygen vacancies formed after annealing in argon and nitrogen atmospheres and also to the presence of nitrogen into the TiO2 lattice due to the thermal treatment in the nitrogen atmosphere., The authors would like to express their gratitude for the financial support to the "Generalitat Valenciana (GV/2020/044) " as well as to the "Agencia Estatal de Investigacion" (Project Code: PID2019-105844RB-I00/AEI/10.13039/501100011033) ", for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and the co-finance by the European Social Fund. Authors from UV also thank MINECO (MAT2017-84118-C2-1-R project) and FEDER for funding.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Novel inhibitors of the mitochondrial respiratory chain: Oximes and pyrrolines isolated from Penicillium brevicompactum and synthetic analogues

  • Cantin Sanz, Angel|||0000-0002-3219-1919
  • López-Gresa, María Pilar|||0000-0001-9251-0160
  • Moya Sanz, Mª Del Pilar|||0000-0001-9631-3084
  • Primo Millo, Jaime|||0000-0003-2254-8184
  • Gonzalez Más, Mª Carmen
  • Miranda Alonso, Miguel Ángel
  • Romero, Vanessa
  • Peris, Eva
  • Estornell, Ernesto
[EN] The capacity of inhibition of the mammalian mitochondrial respiratory chain of brevioxime 5a, a natural insecticide compound isolated from Penicillium brevicompactum culture broth, and another 15 analogue compounds, other oximes 5b and 5c; two diastereomeric pyrrolidines 1c' and 1c"; five pyrrolines 3c', 3c" (diastereomers between them), 3a, 3b, and 6; two oxazines 4c' and 4c" (also diastereomers between them); and four pyrrol derivatives 7-10, are analyzed in this paper. Compounds 3b, 3c', 3c", 4c', 4c", 5b, 5c, 6, and 10 were found to be inhibitors of the integrated electron transfer chain (NADH oxidase activity) in beef heart submitochondrial particles (SMP), establishing that all of them except compound 3b and 6 only affected to complex I of the mitochondrial respiratory chain. The most potent product was 5b, with an IC50 of 0.27 mu M, similar to the IC50 values of other known complex I inhibitors. The diastereomeric pairs 1 c'/1c", 3c'/3c", 4c'/4c", and 5c have not been previously described. Chemical characterization, on the basis of spectral data, is also shown., We acknowledge the Fundacio¿n Jose¿ y Ana Royo for a postdoctoral grant to M.C.G., and the Conserjerı¿a de Educacio¿n y Ciencia de la C. Valenciana for the doctoral grant to M.P.L. This work has been supported by Oficina de Ciencia y Tecnologı¿a. I+D projects of the Generalitat Valenciana (Project GV01- 293), the Conselleria d Agricultura, Pesca i Alimentacio¿ (Project GVCAPA00-0529), and Fondos Europeos de Desarrollo Regional (FEDERFSE) of the European Union through the Fondo de Investigacio¿n Sanitaria (FIS 01/0406).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Comparative Study of Vaginal Labor and Caesarean Section Postpartum Uterine Myoelectrical Activity

  • Díaz-Martínez, María del Alba
  • Mas-Cabo, Javier
  • Cardona-Urrego, Karen
  • Monfort-Ortiz, Rogelio
  • Lopez-Corral, Angel
  • De Arriba-Garcia, Maria
  • Perales, Alfredo
  • Prats-Boluda, Gema|||0000-0002-9362-5055
  • Garcia-Casado, Javier|||0000-0003-1410-2721
  • Ye Lin, Yiyao|||0000-0003-2929-181X
[EN] Postpartum hemorrhage (PPH) is one of the major causes of maternal mortality and morbidity worldwide, with uterine atony being the most common origin. Currently there are no obstetrical techniques available for monitoring postpartum uterine dynamics, as tocodynamometry is not able to detect weak uterine contractions. In this study, we explored the feasibility of monitoring postpartum uterine activity by non-invasive electrohysterography (EHG), which has been proven to outperform tocodynamometry in detecting uterine contractions during pregnancy. A comparison was made of the temporal, spectral, and non-linear parameters of postpartum EHG characteristics of vaginal deliveries and elective cesareans. In the vaginal delivery group, EHG obtained a significantly higher amplitude and lower kurtosis of the Hilbert envelope, and spectral content was shifted toward higher frequencies than in the cesarean group. In the non-linear parameters, higher values were found for the fractal dimension and lower values for Lempel-Ziv, sample entropy and spectral entropy in vaginal deliveries suggesting that the postpartum EHG signal is extremely non-linear but more regular and predictable than in a cesarean. The results obtained indicate that postpartum EHG recording could be a helpful tool for earlier detection of uterine atony and contribute to better management of prophylactic uterotonic treatment for PPH prevention., This work was supported by the Spanish Ministry of Economy and Competitiveness, the European Regional Development Fund (MCIU/AEI/FEDER, UE RTI2018-094449-A-I00-AR) and the Generalitat Valenciana (GV/2018/104 and AICO/2019/220).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

What types of firms acquire knowledge intensive services and from which suppliers?

  • García Quevedo, José Andrés
  • Montolio, Daniel
  • Mas Verdú, Francisco|||0000-0002-0902-9462
[EN] Knowledge intensive services and, in particular, R&D services contribute significantly to innovation in firms. The objective of this paper is to find out which characteristics of firms explain the acquisition of R&D services and to analyse whether there are ifferences depending on the typology of the supplier (universities, technology centres and consulting firms). Three main conclusions emerge from the econometric estimations carried out with information from a survey of innovative firms in the region of Valencia in Spain. First, the results show that firm size and age matter in the decision to buy R&D services. Second, our results are consistent with the relevance that the literature gives to human capital in absorbing external knowledge. Third, innovation policy has a significant influence on the decision to acquire R&D services, particularly from universities and technology centre, The authors thank the Alto Consejo Consultivo en I+D de la Generalitat Valenciana and IMPIVA for facilitating access to the survey and, particularly, Manuel López Estornell and Emilio Cubel for preparing the questionnaire and the sample. José García-Quevedo gratefully acknowledges support from grants ECO2010-16934 and 20099SGR102. Francisco MasVerdú gratefully acknowledges support from grants ECO2008-04708/ECON, ECO2010-16934, PAID 06-10/2392 and GV/2011/049. Daniel Montolio acknowledges support from grant 2009SGR102.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

MOF-Triggered Synthesis of Subnanometer Ag02 Clusters and Fe3+ Single Atoms: Heterogenization Led to Efficient and Synergetic One- Pot Catalytic Reactions

  • Tiburcio, Estefanía
  • Zheng, Yongkun
  • Bilanin-Artigado, Cristina
  • Hernández-Garrido, Juan Carlos
  • Martín-García, Nuria
  • Ferrando-Soria, Jesus
  • Armentano, Donatella
  • Pardo, Emilio
  • Vidal Moya, José Alejandro
  • Oliver-Meseguer, Judit|||0000-0003-1555-3583
  • Mon-Conejero, Marta|||0000-0002-1983-1096
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] The combination of well-defined Fe3+ isolated single-metal atoms and Ag2 subnanometer metal clusters within the channels of a metal¿organic framework (MOF) is reported and characterized by single-crystal X-ray diffraction for the first time. The resulting hybrid material, with the formula [Ag02(Ag0)1.34FeIII0.66]@NaI2{NiII4[CuII2(Me3mpba)2]3}·63H2O (Fe3+Ag02@MOF), is capable of catalyzing the unprecedented direct conversion of styrene to phenylacetylene in one pot. In particular, Fe3+Ag02@MOF¿which can easily be obtained in a gram scale¿exhibits superior catalytic activity for the TEMPO-free oxidative cross-coupling of styrenes with phenyl sulfone to give vinyl sulfones in yields up to >99%, which are ultimately transformed, in situ, to the corresponding phenylacetylene product. The results presented here constitute a paradigmatic example of how the synthesis of different metal species in well-defined solid catalysts, combined with speciation of the true metal catalyst of an organic reaction in solution, allows the design of a new challenging reaction., This work was supported by the MICINN (Spain) (Projects PID2019-104778GB-I00, PID2020-115100GB-I00, and Ex-cellence Unit "Maria de Maeztu" CEX2019-000919-M) . This work was been funded by Generalitat Valenciana, Prometeo Grupos de Investigacion de Excelencia (PROMETEU/2021/054) and GV/emergentes (GV/2021/138) . D. A . also acknowl-edges the financial support of the European Union-NextGenerationEU under the National Recovery and Resil-ience Pla n (NRRP) of Ministero dell'Universita ` e della Ricerca (MUR) (Project code PE0000021, "Network 4 Energy Sustainable Transition-NEST) . Thanks are also extended to the 2019 Post-doctoral Junior Leader-Retaining Fellowship, la Caixa Foundation (ID100010434 and fellowship code LCF/BQ/PR19/11700011) , the "Generalitat Valenciana" (SEJI/2020/034) , and the "Ramon y Cajal" program (RYC2019-027940-I) (J.F.-S.) . E.P. acknowledges the financial support from the European Research Council under the European Union's Horizon 2020 research and innovation programme/ERC Grant Agreement No 814804, MOF-reactors. M.M., N.M., and J.O.-M. acknowledge MICIIN from a contract under the Juan de la Cierva program (FJC2019-040523-I, FJC2018-035455-I, and IJC2018-036514-I, respectively) . E.T. thanks the MICINN for a PhD FPI grant. Y.Z. tha n k s the China Scholarship Council (CSC No: 202009350009) for a Ph.D. fellowship. C.B. thanks ITQ for a contract. We acknowledge ALBA Synchrotron for allocating beamtime and CLAESS beamline staff, especially Dr. Carlo Marini , for their technical support during our experiment. This study forms part of the Advanced Materials programme (MFA/2022/048) and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Recovery of zinc from spent pickling solutions using an electrochemical reactor in presence and absence of an anion-exchange membrane: Galvanostatic operation

  • Carrillo Abad, Jorge
  • García Gabaldón, Montserrat|||0000-0003-4254-6733
  • Ortega Navarro, Emma María|||0000-0001-6902-018X
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
The performance of a one- and two-compartment electrochemical reactor under galvanostatic control for zinc recovery present in the spent pickling solutions is studied in this paper. These solutions, which mainly contain ZnCl 2 and FeCl 2 in aqueous HCl media, come from the hot dip galvanizing industry. The effect of the anion-exchange membrane (AEM) on the figures of merit of the electrochemical reactor is analyzed. In the absence of iron in solution, as the current value was shifted towards more negative values, the zinc fractional conversion increased because of the increase in the zinc reduction rate. However, the increase in current values made current efficiency decrease due to the hydrogen-reduction side reaction, which caused an increment in the specific energy consumption. The presence of iron in synthetic solutions led to a decrease in current efficiency associated with the reverse redox Fe 2+/Fe 3+ system and to the enhancement of the HER, which also induced increments in the local pH and the subsequent zinc redissolution. These adverse effects related to the presence of iron could be minimized by the interposition of an AEM. In this case, the zinc redissolution was eliminated which enabled zinc conversion values close to 100% together with higher current efficiencies as the consumption of current by the system Fe 2+/Fe 3+ was diminished. © 2012 Elsevier B.V. All rights reserved., Authors want to express their gratitude to the Universidad Politecnica de Valencia for the economic support in the Project Reference PAID-06-08, and to the Generalitat Valenciana for the financing of the Project Reference GV/2010/029.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Passive-aggressive for on-line learning in statistical machine translation

  • Martínez Gómez, Pascual
  • Sanchis Trilles, Germán
  • Casacuberta Nolla, Francisco|||0000-0002-8497-5598
New variations on the application of the passive-aggressive algorithm to statistical machine translation are developed and compared to previously existing approaches. In online adaptation, the system needs to adapt to real-world changing scenarios, where training and tuning only take place when the system is set-up for the first time. Post-edit information, as described by a given quality measure, is used as valuable feedback within the passive-aggressive framework, adapting the statistical models on-line. First, by modifying the translation model parameters, and alternatively, by adapting the scaling factors present in stateof- the-art SMT systems. Experimental results show improvements in translation quality by allowing the system to learn on a sentence-by-sentence basis., This paper is based upon work supported by the EC (FEDER/FSE) and the Spanish MICINN under projects MIPRCV “Consolider Ingenio 2010” (CSD2007-00018) and iTrans2 (TIN2009-14511). Also supported by the Spanish MITyC under the erudito.com (TSI-020110-2009-439) project, by the Generalitat Valenciana under grant Prometeo/2009/014 and scholarship GV/2010/067 and by the UPV under grant 20091027.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Consumer practices regarding the purchase, use, willingness to repair, and disposal of small electric and electronic equipment: A Spanish survey on kettles

  • Sandez, Sonia
  • Ibañez-Forés, Valeria
  • Juan, Pablo
  • Bovea, María D.
  • Perez-Belis, Victoria|||0000-0002-7545-917X
[EN] Repair is one of the main strategies to extend the lifetime of products in the circular economy framework. With the aim of identifying current consumer practices toward the purchase, use, and end of life of electric and electronic equipment (EEE), including willingness to repair, maintenance, and final disposal, a survey is designed and implemented online, taking kettles as an application case. Regarding current strategies for extending the lifespan of these items, a general lack of maintenance and low levels of reparability or reuse have been detected. Disposal patterns show that nearly half of all kettles disposed of were still functioning. Nevertheless, a future willingness to repair these items has been identified, either by users themselves or at repair centers, if the manufacturer provides the means to do so. Finally, the results reveal that when consumers purchase a kettle, the price and then the energy efficiency score are the main priorities affecting their purchasing decisions, taking priority over the reparability score. These results can help in the design of more focused and direct strategies to promote the reparability of small household appliances, encourage the authorities to regulate the new reparability score in a more efficient way, and improve the way that information is transmitted to users/consumers., The authors are grateful to the Generalitat Valenciana (Spain) (projects GV/2020/172 and ACIF/2020/334) for their financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Poly(2-hydroxyethyl acrylate) hydrogels reinforced with graphene oxide: Remarkable improvement of water diffusion and mechanical properties

  • Sánchez-Correa, Francisco Vicente
  • Serrano Aroca, Ángel
  • VIDAURRE-AGUT, CARLA
  • Campillo-Fernández, Alberto J.|||0000-0002-2978-5994
[EN] A series of hybrid hydrogels of poly(2-hydroxyethyl acrylate), PHEA, and graphene oxide, GAO, with GAO content up to 2 wt % has been prepared by in situ polymerization. Because PHEA has been used as biomaterial in various applications, has a side chain with the hydroxyl functional group and its mechanical properties are poor, it is a good candidate for reinforcement with GAO. Fourier transform (infrared) spectroscopy, atomic force microscopy, differential scanning calorimetry, the thermal, mechanical, and water sorption properties of neat PHEA and PHEA/GAO composites have been studied in order to elucidate the dispersion and interaction between both components. An increase in the water diffusion coefficient and dramatic changes in its mechanical proper- ties are the most remarkable results. Thus, at a nanofiller load of 2 wt %, the novel materials present an increased diffusion coeffi- cient higher than 380% and the elastic modulus is enhanced by more than 650% in dry state and by more than 100% in swollen state, both compared to neat PHEA. These results have been attributed to the excellent interaction between the matrix, PHEA, and the reinforcement, GAO, and could open the door to new applications in the field of biomaterials with higher structural requisites., This work was supported by Project GV/2016/067 of the Generalitat Valenciana. AFM, and the stress-strain assay was conducted by the authors in the Microscopy Service of the Universitat Politecnica de Valencia, whose advice is greatly appreciated. The authors acknowledge M. Monleon-Pradas for his helpful discussions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Functional Signatures in Non-Small-Cell Lung Cancer: A Systematic Review and Meta-Analysis of Sex-Based Differences in Transcriptomic Studies

  • Pérez-Díez, Irene
  • Hidalgo, Marta R.
  • Malmierca-Merlo, Pablo
  • Andreu, Zoraida
  • Romera-Giner, Sergio
  • Farràs, Rosa
  • Provencio, Mariano
  • Romero, Atocha
  • García-García, Francisco
  • DE LA IGLESIA VAYÁ, MARIA DE LOS DESAMPARADOS
[EN] While studies have established the existence of differences in the epidemiological and clinical patterns of lung adenocarcinoma between male and female patients, we know relatively little regarding the molecular mechanisms underlying such sex-based differences. In this study, we explore said differences through a meta-analysis of transcriptomic data. We performed a meta-analysis of the functional profiling of nine public datasets that included 1366 samples from Gene Expression Omnibus and The Cancer Genome Atlas databases. Meta-analysis results from data merged, normalized, and corrected for batch effect show an enrichment for Gene Ontology terms and Kyoto Encyclopedia of Genes and Genomes pathways related to the immune response, nucleic acid metabolism, and purinergic signaling. We discovered the overrepresentation of terms associated with the immune response, particularly with the acute inflammatory response, and purinergic signaling in female lung adenocarcinoma patients, which could influence reported clinical differences. Further evaluations of the identified differential biological processes and pathways could lead to the discovery of new biomarkers and therapeutic targets. Our findings also emphasize the relevance of sex-specific analyses in biomedicine, which represents a crucial aspect influencing biological variability in disease., This work was supported by Fondo de Investigación Sanitaria (ISCIII PI15-00209), GV/2020/186, and ISCIII PT17/0009/0015 FEDER.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Application of regularized alternating least squares to an astrophysical problem

  • Llinares Llopis, Raúl|||0000-0002-9732-2262
  • Igual García, Jorge|||0000-0003-3408-4014
  • Camacho-García, Andrés|||0000-0001-8542-4264
Determination of the compounds that are present in molecular clouds is carried out from the study of the infrared spectrum of astrophysical ices. This analysis plays a fundamental role in the prediction of the future evolution of the cloud under study. The process is simulated in the laboratory under similar conditions of thermal and energetic processing, recording the infrared absorption spectrum of the resultant ice. The spectrum of each ice can be modeled as the linear instantaneous superposition of the spectrum of the different compounds, so a Source Separation approach is appropriate. We propose the use of Alternating Least Squares and a Regularized version to identify the molecules that are present in the ice mixtures. Since the spectra and abundances are non-negative, a non-negativity constraint can be applied to obtain solutions with physical meaning. We perform several simulations of synthetic and real mixtures of ices in order to compare both solutions and to show how the proposed approach provides an efficient way to recover underlying spectral patterns that are physically meaningful. (C) 2012 Elsevier Inc. All rights reserved., This work has been funded by the Valencia Regional Government (Generalitat Valenciana) through project GV/2010/002 (Conselleria d'Educacio) and by the Universidad Politecnica de Valencia under Grant No. PAID-06-09-003-382.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Interferometric method of determining the refraction index of two-dimensional sonic crystals

  • Romero García, Vicente
  • Fuster García, Elíes|||0000-0002-0716-8960
  • García-Raffi, L. M.|||0000-0003-3985-8453
  • Sánchez Pérez, Juan Vicente|||0000-0002-4473-8782
  • Uris Martínez, Antonio|||0000-0002-2005-2305
[EN] Sonic crystals are defined as materials consisting of periodic distributions of acoustic scatterers in another medium with different elastic properties. These materials present two main acoustical features: they present ranges of frequencies where the acoustic wave propagation is forbidden and, moreover, they can be used to construct acoustical refractive devices. We present here an interferometric method of characterizing directly the refraction index of these materials. We focused our research on sonic crystals constructed with a periodic distribution of rigid cylinders in air. The interferometric method used is based on the acoustical analog of an optical device called Fresnel’s biprism. Our numerical predictions are in good agreement with the experimental results obtained and allow us to estimate the refraction index for very low frequencies. Moreover, in this range we show the nonlinear behavior in the dispersion relation refraction index versus frequency. Finally, we analyze the relationship between the refraction index and some typical sonic crystal parameters. In view of the results we can conclude that this method offers certain advantages with respect to the classical method used to obtain the refraction index in sonic crystals with airborne propagation: the phase delay method., This work has been partially supported by the Spanish Ministry of Science and Education Project No. MAT2007-03097 and partially supported by Generalitat Valenciana Project GV/2007/191. We would like to thank the R+D +i Linguistic Assistance Office at the Universidad Politécnica de Valencia for their help in revising this paper.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancing Vocabulary Acquisition with Mnemonics in a Serious Video Game

  • Casañ-Pitarch, Ricardo|||0000-0002-1689-7954
[EN] The manipulation of virtual objects in video games acts as a form of mnemonics, enhancing information retention through visuals, narratives, and actions. This research aims to evaluate the effectiveness of the video game The Engineer in helping students in a foreign language classroom acquire new vocabulary. 64 industrial engineering bachelor¿s degree students participated in this study, with 38 in the experimental group and 26 in the control group. All students were enrolled in the professional English for industrial engineering (B2) subject, a requirement of their bachelor¿s degree program. Both groups received the same content and classroom hours. However, while the control group reinforced learning through paper-based exercises, the experimental group engaged with the video game The Engineer. To assess their performances, students from both groups completed a vocabulary pre-test in the first lesson, followed by two post-tests: one immediately after the lessons and another one two weeks later. The results showed that the experimental group outperformed the control group in both post-tests. Although scores declined in the second post-test, the experimental group exhibited a less significant drop. In conclusion, these findings suggest that the use of mnemonics in a video game could be effective in assisting students to acquire new vocabulary., This work is the result of two finalised projects that we must acknowledge. First, the project funded by the Autonomous Government of the Valencian Community (Spain), Subvencions a grups d investigació emergent, reference GV/2021/035, which supported the initial development of the video game. Subsequently, this study was further developed within the educational innovation and improvement project A+D 2023 PIME C (Ref. 1920), Enseñanza de inglés para el negocio de la ingeniería industrial a través de simulación, juego y gamificación , funded by the Vice-Rector s Office for Studies, Quality and Accreditation of the Universitat Politècnica de València through the 2023 Learning + Teaching Call.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A generalized sequential subpredictor for input delayed systems under time-varying delay mismatches

  • González Sorribes, Antonio|||0000-0003-2690-0472
[EN] For input delayed systems, the sequential subpredictor (SSP) control scheme has the advantage that arbitrarily large delays can be tolerated in the control loop by introducing more and more subpredictors. However, an exact delay compensation is not possible in the presence of time-varying delay mismatches, and larger delays cannot therefore be obtained by increasing the number of subpredictors. To alleviate this limitation and enhance robustness against time-varying delay uncertainties, a generalized sequential subpredictor (SSP) control scheme is proposed by introducing new observer parameters that can be designed via Linear Matrix Inequalities (LMI) and Cone-Complementarity Linearization (CCL) algorithm. Finally, the effectiveness of the proposed method is illustrated by a simulation example.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Una aproximación al cluster del vino de Alicante. Economía, organización y retos futuros, An approach to the wine cluster of Alicante. Economy, organization and future challenges

  • Tomás-Miquel, José-Vicente|||0000-0002-5053-935X
  • Expósito-Langa, Manuel|||0000-0001-7707-7354
[EN] The present work carries out an examination of the situation of the wine cluster of Alicante from a historical, organizational, economic, productive, commercial and strategic perspective. Wine in the province of Alicante is characterised by a marked traditional accent and ancient culture where their businesses have evolved over time. Currently it shows a positive evolution in sales and an approach oriented towards the production of higher quality wines. This situation represents a huge investment in R&D and marketing that needs to be further strengthened in order to improve their competitiveness, especially towards finding international markets and more demanding segments., [ES] El presente trabajo aproxima la situación del cluster del vino de la provincia de Alicante tanto desde el punto de vista histórico como organizativo, económico, productivo, comercial y estratégico. El vino en la provincia de Alicante tiene una tradición y cultura milenaria donde sus empresas han ido evolucionando a través del tiempo. Actualmente muestra una evolución positiva en sus ventas, así como un enfoque cada vez más orientado hacia la producción de vinos de mayor calidad. Esta situación supone un enorme esfuerzo en I+D y comercialización que debe continuar consolidándose para mejorar su competitividad, especialmente hacia la búsqueda de mercados internacionales y de segmentos más exigentes., Esta investigación ha sido financiada por la Generalitat Valenciana‐Dirección General de Política Científica “Ayudas para la realización de proyectos de I+D para grupos de investigación emergentes”, referencia GV/2015/079”
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Friendly environmental policies implementation within the company: an ESG ratings analysis and its applicability to companies&apos, environmental performance enhancement

  • Segarra-Oña, Marival|||0000-0001-9674-9056
  • Peiró Signes, Angel|||0000-0002-1549-6972
  • Mondéjar-Jiménez, José
  • Sáez Martínez, Francisco José
[EN] In order to move towards a more environmentally oriented economy, society needs to be aware and able to recognize environmental friendly practices. Firms are increasingly relying on environmental scores ratings to make strategic decisions. In this context, understanding how day-to-day company¿s decisions affect environment scores is crucial. This paper examines the impact of social policies on the environmental scores of companies. Using data on for 3895 firms from the ASSET4 database between 2006 and 2010, we report on how employment quality, health and safety, training and development and diversity policies affect firms¿ environmental scores. An ANOVA test, followed by a regression analysis, was ran to test differences between the major markets. Also, the interaction between the selected variables and environmental scores, was tested in order to investigate the individual effects of social policies and location on environmental performance. Results show that environmental scores increase with the presence of social policies, and that the location of the company is a differentiating factor. The paper concludes with a discussion of the implications of these findings for future environmental promotion within companies., The authors would like to thank the Valencian Government for its support through the research project (GV/2015/003) and the Universitat Politecnica de Valencia for the ADSIDEO 2014 Grants led by prof. Segarra (Centre for Cooperation and Development).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis de maestría (MasterThesis)

Análisis de señales ECG/BSPM para la identificación de las frecuencias de activación de regiones auriculares durante Fibrilación Auricular, Analysis of ECG/BSPM signals for the identification of activation frequencies of atrial regions during Atrial Fibrillation., Anàlisi de senyals ECG/BSPM per a la identificació de les freqüències d&apos, activació de regions auriculars durant Fibril·lació Auricular.

  • Luis Moura, Duna de
[ES] La fibrilación auricular (FA) es la arritmia cardíaca más prevalente, afectando al 2% de la población general, desencadenando notables implicaciones tanto en el ámbito sanitario como en el económico. A pesar de su marcada incidencia, los mecanismos subyacentes que provocan esta condición aún no se comprenden en su totalidad, lo que contribuye a resultados terapéuticos subóptimos, múltiples intentos de tratamiento y cargas económicas y de salud significativas [Tilz et al. 2012]. Aunque se han registrado avances en las terapias farmacológicas y la ablación con catéter, las limitaciones persisten, evidenciadas por tasas de éxito variables y demoras sustanciales en la identificación de la opción farmacológica óptima [Hindricks et al. 2020]. La ablación con catéter en las venas pulmonares, si bien eficaz para pacientes sintomáticos, a menudo requiere intervenciones adicionales. La toma de decisiones relacionada con la ablación sigue siendo subjetiva, con retrasos frecuentes, especialmente para mujeres y minorías, a pesar de la presentación de síntomas más graves [Fuster et al. 2006, Cochet et al. 2014]. El propósito principal de este trabajo es abordar la problemática existente mediante la identificación no invasiva de las regiones cardíacas con frecuencias dominantes para la ablación en pacientes con FA. Para ello, se cuenta con una base de datos que incluye registros de 47 pacientes provenientes del Hospital Gregorio Marañón en Madrid y del Hospital de Stanford en California. Cada paciente ha sido sometido a un Mapeo Potencial de Superficie Cardíaca (BSPM, por sus siglas en inglés) y a un Electrograma Intracardíaco (EGM) obtenido de forma invasiva mediante catéteres. La técnica BSPM permite la captura de señales cardíacas de manera no invasiva desde la superficie del cuerpo, mientras que el EGM se registra de manera invasiva durante la intervención empleando catéteres intraauriculares de tipo basket. La simultaneidad en la adquisición de ambos tipos de registros proporciona la base para desarrollar un modelo de aprendizaje automatizado que permita obtener una representación precisa de la señal EGM a partir de la BSPM [Pedrón-Torrecilla, et al. 2016]. La innovación clave de este enfoque radica en abordar el problema inverso de la cardiología, que consiste fundamentalmente en obtener una aproximación de la señal EGM a partir de la señal BSPM. Esta estrategia se enfoca en detectar de manera no invasiva las regiones auriculares de mayor frecuencia de activación durante la FA, que podrían constituir focos potenciales para la ablación destinada a tratar y eliminar la patología en el paciente. La estrategia propuesta para abordar el problema inverso implica calcular el ciclo de activación auricular (CL) mediante métodos de autocorrelación y aprendizaje automatizado [Rodrigo, et al. 2021]. En este sentido, se llevará a cabo un análisis de las señales registradas por la prueba de BSPM que permita determinar el CL auricular, utilizando técnicas de correlación y correlación con patrones múltiples. Buscando optimizar el método de análisis del BSPM mediante la comparación con el estándar de oro representado por los CL de los EGM intracardiacos obtenidos simultáneamente. Para establecer una correspondencia precisa entre el CL de las regiones auriculares y las mediciones del BSPM, se aplicarán técnicas de análisis de correspondencia y aprendizaje automático. Este enfoque permitirá no solo identificar las áreas críticas para la ablación, sino también personalizar la terapia de manera eficaz y precisa. Finalmente, se buscará determinar la distribución óptima y el número adecuado de electrodos en el BSPM con el objetivo de lograr una reconstrucción óptima de las señales con la mínima cantidad posible de electrodos, contribuyendo así a mejorar la calidad de la información recopilada [Rodrigo et al., 2017]. Este enfoque integral busca proporcionar una base sólida para la planificación de la terapia personalizada en pacientes con FA, con el potencial, [EN] Atrial fibrillation (AF) is the most prevalent cardiac arrhythmia, affecting 2% of the general population, triggering notable implications in both the health and economic fields. Despite its marked incidence, the underlying mechanisms causing this condition are not yet fully understood, contributing to suboptimal therapeutic outcomes, multiple treatment attempts, and significant health and economic burdens [Tilz et al. 2012]. Although there have been advances in pharmacological therapies and catheter ablation, limitations remain, evidenced by variable success rates and substantial delays in identifying the optimal pharmacological option [Hindricks et al. 2020]. Pulmonary vein catheter ablation, while effective for symptomatic patients, often requires additional interventions. Decision-making related to ablation remains subjective, with frequent delays, especially for women and minorities, despite the presentation of more severe symptoms [Fuster et al. 2006, Cochet et al. 2014]. The main purpose of this work is to address the existing problem by non-invasively identifying cardiac regions with dominant frequencies for ablation in patients with AF. To do this, there is a database that includes records of 47 patients from the Gregorio Marañón Hospital in Madrid and the Stanford Hospital in California. Each patient has undergone Cardiac Surface Potential Mapping (BSPM) and an Intracardiac Electrogram (EGM) obtained invasively through catheters. The BSPM technique allows the capture of cardiac signals non-invasively from the surface of the body, while the EGM is recorded invasively during the intervention using basket-type intra-atrial catheters. The simultaneity in the acquisition of both types of records provides the basis for developing an automated learning model that allows obtaining an accurate representation of the EGM signal from the BSPM [Pedrón-Torrecilla, et al. 2016]. The key innovation of this approach lies in addressing the inverse problem of cardiology, which essentially consists of obtaining an approximation of the EGM signal from the BSPM signal. This strategy focuses on non-invasively detecting the atrial regions with the highest activation frequency during AF, which could constitute potential foci for ablation aimed at treating and eliminating the pathology in the patient. The proposed strategy to address the inverse problem involves calculating the atrial firing cycle (CL) using autocorrelation and machine learning methods [Rodrigo, et al. 2021]. In this sense, an analysis of the signals recorded by the BSPM test will be carried out to determine the atrial CL, using correlation and correlation techniques with multiple patterns. Seeking to optimize the BSPM analysis method by comparing it with the gold standard represented by the CL of intracardiac EGMs obtained simultaneously. To establish an accurate correspondence between the CL of the auricular regions and the BSPM measurements, correspondence analysis and machine learning techniques will be applied. This approach will allow not only to identify critical areas for ablation, but also to personalize therapy effectively and precisely. Finally, we will seek to determine the optimal distribution and the appropriate number of electrodes in the BSPM with the objective of achieving an optimal reconstruction of the signals with the minimum possible number of electrodes, thus contributing to improving the quality of the information collected [Rodrigo et al ., 2017]. This comprehensive approach seeks to provide a solid foundation for personalized therapy planning in patients with AF, with the potential to significantly improve clinical outcomes.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Computing the closest positive definite correlation matrix for experimental MIMO cannel analysis

  • García Ariza, Alexis Paolo
  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
Under realistic propagation conditions in multiple-input-multiple-output (MIMO) wireless channels, some experimental (measured) full-spatial-correlation (FSC) MIMO channel matrices may not be positive definite, especially when the number of antennas elements increases. In this letter, an enhancement technique to solve the problem of non-positiveness for large experimental FSC matrices is proposed. This technique, based on the alternating-projection (AP) method, computes the closest positive definite matrix to the experimental FSC matrix preserving its covariance structure. The proposed technique is useful to evaluate the performance of large array MIMO systems under realistic conditions, allowing the Cholesky factorization of FSC matrices, which is needed for synthetic channel generation. © 2006 IEEE., This work was supported in part by the AlBan Programme, the European Union Programme of High Level Scholarships for Latin America, scholarship No. E04D044088CO, and in part by the Research Support Programme of the Generalitat Valenciana (Project No. GV06/076), Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modelización de cerámicas y transductores piezoeléctricos vibrando en espesor mediante matrices de transferencia, Modelling ceramics and piezoelectric transducers vibrating in thickness mode using transfer matrices

  • Jiménez, Noé
  • Camarena, Francisco
[EN] In this work we present the modeling of a piezoelectric ceramic vibrating in thickness mode using transfer matrices. The complete modeling of the vibratory behavior of a piezoelectric ceramic is a complex problem.This is mainly due to the tensorial denition of the involved stresses and the anisotropy of the piezoelectric solids, both arising due to their intrinsic elastic and piezoelectric properties. This problem is recurrent when teaching of Acoustics and Ultrasound, Telecommunications and electronic sensors. The modeling using transfer matrices provides a simple but accurate method, since it captures the main physical phenomena of the electromechanical problem. In particular, the presented modeling allows a high degree of freedom to modify the design by adding layers of different materials and / or electronic components, with, in addition, it also allows the student to obtain an analytical model of the piezoelectric effect and the study of the electrical-elastic system., [ES] En este trabajo presentamos la modelización de una cerámica piezoeléctrica vibrando en modo espesor empleando matrices de transferencia. La modelización completa del comportamiento vibratorio de un material piezoeléctrico es un problema complejo. Ello es debido principalmente al carácter tensorial de los esfuerzos junto a la anisotropía de los sólidos piezoeléctricos, tanto en sus propiedades elásticas como piezoeléctricas. Este es un problema recurrente en la docencia de Acústica y Ultrasonidos, Telecomunicaciones y sensores electrónicos. La modelización mediante matrices de transferencia proporciona un método simple pero preciso, pues captura los principales fenómenos físicos del problema electromecánico. En particular, la modelización presentada permite al estudiante por un lado obtener un modelo analítico del efecto piezoeléctrico y el estudio del sistema eléctrico-elástico, y por otro lado permite un elevado grado de libertad para modificar el diseño añadiendo capas de diferentes materiales y/o componentes electrónicos., Este trabajo ha sido financiado por la Generalitat Valenciana a través del contrato APOSTD/2017/042 y las subvenciones para la realización de proyectos de I+D+i desarrollados por grupos de investigación emergentes GV/2018/011. Actuación cofi nanciada por la Unión Europea a través del Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) de la Comunitat Valenciana 2014-2020 (IDIFEDER/2018/022). Este trabajo ha sido co financiado por la Agència Valenciana de la Innovació a través de la Unitat Científica d'Innovació Empresarial (INNCON00/18/9).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A plant virus movement protein regulates the gcn2p kinase in budding yeast

  • APARICIO HERRERO, FREDERIC|||0000-0002-1586-9978
  • Gadea Vacas, José|||0000-0002-3612-7914
  • Sánchez-Navarro, Jesús-Ángel|||0000-0002-3320-2827
  • Pallás Benet, Vicente|||0000-0003-4954-989X
  • Murguía, Jose R.|||0000-0001-9364-4603
  • Aparicio Sanchis, Rafael
[EN] Virus life cycle heavily depends on their ability to command the host machinery in order to translate their genomes. Animal viruses have been shown to interfere with host translation machinery by expressing viral proteins that either maintain or inhibit eIF2¿ function by phosphorylation. However, this interference mechanism has not been described for any plant virus yet. Prunnus necrotic ringspot virus (PNRSV) is a serious pathogen of cultivated stone fruit trees. The movement protein (MP) of PNRSV is necessary for the cell-to-cell movement of the virus. By using a yeast-based approach we have found that over-expression of the PNRSV MP caused a severe growth defect in yeast cells. cDNA microarrays analysis carried out to characterise at the molecular level the growth interference phenotype reported the induction of genes related to amino acid deprivation suggesting that expression of MP activates the GCN pathway in yeast cells. Accordingly, PNRSV MP triggered activation of the Gcn2p kinase, as judged by increased eIF2¿ phosphorylation. Activation of Gcn2p by MP expression required a functional Tor1p kinase, since rapamycin treatment alleviated the yeast cell growth defect and blocked eIF2¿ phosphorylation triggered by MP expression. Overall, these findings uncover a previously uncharacterised function for PNRSV MP viral protein, and point out at Tor1p and Gcn2p kinases as candidate susceptibility factors for plant viral infections., This work was supported by grants GV/2007/064 (Proyecto para grupos de investigacion emergentes) and (GV/2011/003) (Prometeo Project) from Conselleria d'Empresa, Universitat i Ciencia (Generalitat Valenciana). The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Recent Advances on the Multiplex Molecular Detection of Plant Viruses and Viroids

  • Pallás Benet, Vicente|||0000-0003-4954-989X
  • Sanchez Navarro, Jesús Ángel
  • James, D.
[EN] Plant viruses are still one of the main contributors to economic losses in agriculture. It has been estimated that plant viruses can cause as much as 50 billion euros loss worldwide, per year. This situation may be worsened by recent climate change events and the associated changes in disease epidemiology. Reliable and early detection methods are still one of the main and most effective actions to develop control strategies for plant viral diseases. During the last years, considerable progress has been made to develop tools with high specificity and low detection limits for use in the detection of these plant pathogens. Time and cost reductions have been some of the main objectives pursued during the last few years as these increase their feasibility for routine use. Among other strategies, these objectives can be achieved by the simultaneous detection and (or) identification of several viruses in a single assay. Nucleic acid-based detection techniques are especially suitable for this purpose. Polyvalent detection has allowed the detection of multiple plant viruses at the genus level. Multiplexing RT polymerase chain reaction (PCR) has been optimized for the simultaneous detection of more than 10 plant viruses/viroids. In this short review, we provide an update on the progress made during the last decade on techniques such as multiplex PCR, polyvalent PCR, non-isotopic molecular hybridization techniques, real-time PCR, and array technologies to allow simultaneous detection of multiple plant viruses. Also, the potential and benefits of the powerful new technique of deep sequencing/next-generation sequencing are described., This work was funded by grant BIO2017-88321-R from the Spanish Direccion General de Investigacion Cientifica y Tecnica (DGICYT) and the Prometeo Program GV2014/010 from the Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Use of Research Organizations Registry (ROR) identifiers in author academic profiles: the case of Google Scholar Profiles, Uso de identifcadores del Registro de Organizaciones de Investigación (ROR) en perfles académicos de autor: el caso de Google Scholar Profles

  • Orduña-Malea, Enrique|||0000-0002-1989-8477
  • Bautista-Puig, Núria
[EN] Research organizations¿ persistent identifiers allow for reducing affiliation ambiguities, enable accurate institutional analyses and favor the design of modern online scholarly databases suited for research discovery and research evaluation. However, few studies have attempted to quantify their degree of use. The purpose of this work is precisely to determine the use of Research Organizations Registry (ROR) IDs in author academic profiles, specifically in Google Scholar Profiles (GSP). To do this, all the Google Scholar profiles including the term ROR in any of the public descriptive fields were collected and analyzed. The results evidence a low use of ROR IDs (1,033 profiles), mainly from a few institutions (e.g. Pontificia Universidad Javeriana in Colombia, and Escuela Superior Politécnica del Litoral in Ecuador hold 55.7% of all profiles), from low citationbased impact authors (45.1% of profiles attain less than 100 citations each), belonging mainly to Social Sciences (26.3%), Engineering fields (25.3%), and Natural Sciences (22.2%). Although Google Scholar does not facilitate the inclusion of identifiers, it seems that the world¿s leading research institutions are not recommending their researchers include these identifiers in their profiles yet., [ES] Los identificadores persistentes de las organizaciones de investigación permiten reducir las ambigüedades de afiliaciones, realizar análisis institucionales precisos y favorecen el diseño de modernas bases de datos online académicas adecuadas para el descubrimiento y la evaluación la investigación. Sin embargo, pocos estudios han intentado cuantificar su grado de utilización. El propósito de este trabajo es precisamente determinar el uso de los ID del Registro de Organizaciones de Investigación (ROR) en los perfiles académicos de los autores, específicamente en los perfiles de Google Scholar (GSP). Para ello, se recopilaron y analizaron todos los perfiles de Google Scholar que incluían el término ROR en alguno de los campos descriptivos públicos. Los resultados evidencian un bajo uso de identificadores ROR (1.033 perfiles), principalmente de pocas instituciones (por ejemplo, la Pontificia Universidad Javeriana en Colombia y la Escuela Superior Politécnica del Litoral en Ecuador tienen el 55,7% de todos los perfiles), de autores de bajo impacto basado en citas (el 45,1% de los perfiles alcanzan menos de 100 citas cada uno), pertenecientes principalmente a los campos de Ciencias Sociales (26,3%), Ingenierías (25,3%) y Ciencias Naturales (22,2%). Aunque Google Scholar no facilita la incorporación de identificadores, parece que las principales instituciones de investigación del mundo aún no recomiendan a su personal investigador la inclusión de estos identificadores en sus perfiles, This project has been supported by the project UNIVERSEO (Ref. GV/2021/141), funded by the regional government (Generalitat) of Valencia (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Proving Termination of Context-Sensitive Rewriting with MU-TERM

  • Alarcón, Beatriz
  • Iborra, José
  • Gutiérrez Gil, Raúl|||0000-0002-3984-2868
  • Lucas Alba, Salvador|||0000-0001-9923-2108
[EN] Context-sensitive rewriting (CSR) is a restriction of rewriting which forbids reductions on selected arguments of functions. Proving termination of CSR is an interesting problem with several applications in the fields of term rewriting and programming languages. Several methods have been developed for proving termination of CSR. The new version of MU-TERM which we present here implements all currently known techniques. Furthermore, we show how to combine them to furnish MU-TERM with an expert which is able to automatically perform the termination proofs. Finally, we provide a first experimental evaluation of the tool., This work has been partially supported by the EU (FEDER) and the Spanish MEC, under grants TIN2004-7943-C04-02 and HA 2006-0007, the Generalitat Valenciana under grant GV06/285, and the ICT for EU-India Cross-Cultural Dissemination ALA/95/23/2003/077-054 project. Beatriz Alarc¿on was partially supported by the Spanish MEC under FPU grant AP2005-3399.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A dynamic model of a shell-and-tube condenser operating in a vapour compression refrigeration plant

  • Llopis, R.
  • Cabello, R.
  • Torrella Alcaraz, Enrique
[EN] This work presents a mathematical model of a shell-and-tube condenser based on mass continuity, energy conservation and heat transfer physical fundamentals, whose methodology can be easily adapted for modelling any type of condenser. The model is formulated as a combination of control volumes that represents all the refrigerant states in the condenser and the liquid receiver function, which is carried out by the condenser of the experimental plant. Model validation is performed by using steady-state data and transient tests from an experimental vapour compression plant; the prediction error of the model is lower than 5% and a good representation of the dynamic performance of the condenser is achieved. A theoretical comparison involving the importance of the dynamic responses of the evaporator and the condenser at the plant is also presented., The authors are indebted to the Generalitat Valenciana for partial support under programme Formación de Personal Investigador (FPI) CTBPRB/2005/105 and project GV05/091.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancement of sound in chirped sonic crystals

  • Romero-García, Vicente|||0000-0002-3798-6454
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
  • Staliünas, Kestutis
We propose and experimentally demonstrate a mechanism of sound wave concentration based on soft reflections in chirped sonic crystals. The reported controlled field enhancement occurs at around particular (bright) planes in the crystal and is related to a progressive slowing down of the sound wave as it propagates along the material. At these bright planes, a substantial concentration of the energy (with a local increase up to 20 times) was obtained for a linear chirp and for frequencies around the first band gap. A simple couple mode theory is proposed that interprets and estimates the observed effects. Wave concentration energy can be applied to increase the efficiency of detectors and absorbers., The work was supported by Spanish Ministry of Science and Innovation and European Union FEDER through projects FIS2011-29734-C02-01 and -02 and GVA/2011/055. V. R.-G. is grateful for the support of post-doctoral contracts of the UPV CEI-01-11. K. S. acknowledges the grant of UPV PAID-02-01. We acknowledge the CTFAMA and the Sonic Crystal Technologies Research Group at UPV for the use of the anechoic chamber and the 3DReAMS, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Real-time adaptive algorithms using a Graphics Processing Units

  • Lorente Giner, Jorge
  • Belloch Rodríguez, José Antonio
  • Piñero, Gema
  • Ferrer Contreras, Miguel|||0000-0002-8743-1887
  • de Diego Antón, María|||0000-0001-9948-3396
  • Gonzalez, Alberto|||0000-0002-6984-3212
  • Vidal Maciá, Antonio Manuel
[EN] Graphics Processing Units (GPUs) have been recently used as coprocessors capable of performing tasks that are not necessarily related to graphics processing in order to optimize computing resources. The use of GPUs has being extended to a wide variety of intensive-computation applications among which audio processing is included. However data transactions between the CPU and the GPU and vice versa have questioned the viability of GPUs for applications in which direct and real-time interaction between microphone and loudspeaker is required. One of the audio applications that requires real-time feedback is adaptive channel identification. Particularly, when the partitioned Least Mean Squares (LMS) algorithm is used in the frequency domain, the size of input-data buffers and filters and how they can be managed in order to successfully exploit the GPU resources is an important key in the design process. This paper discusses the design and implementation of all the processing blocks of an adaptive channel identification system on a GPU, proposing a GPU implementation that can be easily adapted to any acoustic scenario, while freeing up CPU resources for other tasks., This work has been financially supported by the Spanish Ministerio de Ciencia e Innovación TEC2009-13741, Universitat Politècnica de València through “Programa de Apoyo a la Investigación y Desarrollo (PAID-05-11)” and Generalitat Valenciana through project PROMETEO/2009/013 and GV/2010/027
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The influence of geographical concentration and structural characteristics on the survival chance of textile firms

  • Puig, Francisco
  • García Mora, María Belén|||0000-0002-4112-5411
  • Santamaria Navarro, Cristina|||0000-0002-8124-2831
[EN] Purpose The purpose of this paper is to evaluate the contribution of location (geographical concentration) and firm structure (age and subsector) to the risk of business failure. Design/methodology/approach The Markov s regression analysis was made for a sample of over 11,700 Spanish textile-clothing firms. Findings The results obtained from the analysis suggest that the risk of business failure is increased by some risk factors relative to the structural characteristics of the firms (younger firms and specialization in low-tech activities), and under determined locational circumstances. Research limitations/implications Our conclusions have been obtained starting from a sample of manufacturing firms in the Spanish textile sector. An extension of this work would be to test its robustness in other countries (for example, Italy or Portugal) and/or for other industries such as footwear and furniture. Practical implications Explaining the different levels of risk business failure shown by firms in an industry. Originality/value Work that has studied the failure of the textile firms within this location- subsector relationship is still scarce. Given that the viability of clusters and of European textile have been put into question, our work evidences that the risk of failure related to the firm s location and structure needs to be tested jointly, so that the way in which the firm addresses environmental changes can be appraised., This investigation was supported by the Research Project GV2011-025 of the Generalitat Valenciana (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Guaranteed computation methods for compartmental in-series models under uncertainty

  • de Pereda Sebastián, Diego
  • Romero Vivó, Sergio|||0000-0001-6689-4324
  • Ricarte Benedito, Beatriz|||0000-0001-8094-1908
  • Bondía Company, Jorge|||0000-0001-7286-3719
The pattern of some real phenomenon can be described by compartmental in-series models. Nevertheless, most of these processes are characterized by their variability, which produces that the exact values of the model parameters are uncertain, although they can be bounded by intervals. The aim of this paper is to compute tight solution envelopes that guarantee the inclusion of all possible behaviors of such processes. Current methods, such as monotonicity analysis, enable us to obtain guaranteed solution envelopes. However, if the model includes nonmonotone compartments or parameters, the computation of solution envelopes may produce a significant overestimation. Our proposal consists of performing a change of variables in which the output is unaltered, and the model obtained is monotone with respect to the uncertain parameters. The monotonicity of the new system allows us to compute the output bounds for the original system without overestimation. These model transformations have been developed for linear and non-linear systems. Furthermore, if the conditions are not completely satisfied, a novel method to compute tight solution envelopes is proposed. The methods exposed in this paper have been applied to compute tight solution envelopes for two different models: a linear system for glucose modeling and a non-linear system for an epidemiological model., This work was partially supported by the Spanish Ministerio de Ciencia e Innovacion through Grant DPI-2010-20764-C02-01, and by the Generalitat Valenciana through Grant GV/2012/085.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Transcranial acoustic holograms for arbitrary fields generation using focused ultrasound into the brain

  • Jiménez-Gambín, Sergio
  • Jimenez, Noe|||0000-0002-6539-670X
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
[EN] We present 3D printed holographic lenses that correct the aberrations of the skull and, simultaneously, produce arbitrary ultrasonic fields with the geometry of brain structures. Using experimental techniques on a human skull phantom (HSP), a multiple-point focusing lens is designed to focus at both human hippocampi at once; a beam following an arbitrary curved trajectory, i.e., a self-bending beam; and a holographic plate producing a broad focus that overlaps with the left hippocampus (LH). Skull and LH geometries and acoustic properties are obtained from CT-scans and MRI, respectively. Time-reversal (TR) method is used to obtain the magnitude and phase of the back-propagated field from the target shape towards the lens surface. The holographic lenses are designed assuming each pixel of the lens vibrates as a Fabry-Pérot resonator. The resulting lenses are 3D printed using SLA techniques. The three studied cases show similar results in simulation and experiment with and without the HSP: for the bi-focal beam, the reconstructed field accurately matches the target foci; for the curved trajectory beam, the target acoustic image is reconstructed by the designed holographic lens; for the broad focus beam, results present the same qualitative performance providing a similar overall covering of the LH. The reported holographic lenses can be used to control the spatial features of ultrasonic beams inside the skull in an unprecedented manner using single-element ultrasonic sources., This work was supported by Generalitat Valenciana through grants APOSTD/2017/042, ACIF/2017/045 and GV/2018/11. FC acknowledges financial support from Agencia Valenciana de la Innovacio through grant INNCON00/18/9 and European Regional Development Fund (IDIFEDER/2018/022).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Application of the Ultrasound Technique in the Production of Rosé and Red Wines

  • Lizama Abad, Victoria|||0000-0002-1677-6909
  • García Esparza, Mª José|||0000-0002-9449-9652
  • Alvarez Cano, María Inmaculada
[EN] The application of the ultrasound technique (US) in the production of rose and red wines has demonstrated that the aromatic composition of rose wine can be affected and that it contributes to increasing the color of red wines without increasing the extraction of astringent tannins. The ultrasound treatment has favored the extraction of anthocyanins, which has had an impact on the increase in color density (C.D.) and has allowed greater color stability over time. Moreover, significant differences have been found between the two US systems applied, with continuous treatment being more effective in the extraction of phenolic compounds than pulsed treatment. The application system of the US also affects the aromatic composition of the wines. These results are of interest, as some esters have been described as important odorants in wines.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of the zinc recovery from spent pickling baths by means of an electrochemical membrane reactor using a cation-exchange membrane under galvanostatic control

  • Carrillo Abad, Jordi
  • García Gabaldón, Montserrat|||0000-0003-4254-6733
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
The performance of a cation-exchange membrane (CEM) used for recovering zinc from real spent pickling baths is studied in this work. These spent baths contain high amounts of ZnCl2 and FeCl2 in aqueous HCl media. The results obtained with this membrane are compared with those obtained with an anion-exchange membrane (AEM) treating the same effluent. The effect of the presence or absence of initial zinc in the cathodic compartment is also studied. The absence of initial zinc in the cathodic compartment in the CEM experiments permits iron codeposition. Furthermore, the results obtained with the CEM are worse than those obtained with the AEM for all the figures of merit. This fact shows the need of filling the cathodic compartment with a synthetic zinc solution. The presence of zinc in the cathodic compartment from the beginning of the electrolysis not only inhibits iron codeposition but also favors zinc deposition as the hydrogen evolution reaction becomes a secondary reaction, improving by this way the results of all the figures of merit of the reactor with the CEM. A deep study about the effect of the applied current and the concentration of the synthetic zinc solution placed in the cathodic compartment permits to reach the equilibrium between the zinc transferred through the membrane and that deposited on the cathode. Therefore, the synthetic cathodic zinc is not consumed at any time. Moreover, under this circumstances iron codeposition is also avoided., The authors want to express their gratitude to the Generalitat Valenciana for a postgraduate Grant (GV/2010/029) and to the Ministerio de Economia y Competitividad for financing the project number CTQ2012-37450-C02-01/PPQ.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On-Line Handwriting Recognition System for Tamil Handwritten Characters

  • Toselli, Alejandro Héctor
  • Pastor-Gadea, Moisés
  • Vidal, Enrique|||0000-0003-4579-5196
[EN] We describe the recognition system we used for the ¿On-Line Tamil Handwritten Character Recognition Competition¿, hosted by the ¿International Workshop on Frontiers in Handwriting Recognition¿. The system is based on continuous density Hidden Markov Models and characterized by feature extraction based on time and frequency-domain features. In that contest we have obtained the third best score in character classification accuracy., This work has been partially supported by the Spanish project iDoc TIN2006-15694-C02-01 and by Consellería d Empresa, Universitat i Ciència - Generalitat Valenciana under contract GV06/252.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Elementary Clothoid-Based Three-Dimensional Curve for Unmanned Aerial Vehicles

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Smart-Distributed Pareto Front Using ev-MOGA Evolutionary Algorithm

  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
  • Blasco, Xavier|||0000-0002-9737-2833
  • Sanchís Saez, Javier|||0000-0001-9697-2696
  • Reynoso Meza, Gilberto
[EN] Obtaining multi-objective optimization solutions with a small number of points smartly distributed along the Pareto front is a challenge. Optimization methods, such as the nor- malized normal constraint (NNC), propose the use of a filter to achieve a smart Pareto front distribution. The NCC optimization method presents several disadvantages related with the procedure itself, initial condition dependency, and computational burden. In this article, the epsilon-variable multi-objective genetic algorithm (ev-MOGA) is pre- sented. This algorithm characterizes the Pareto front in a smart way and removes the disadvantages of the NNC method. Finally, examples of a three-bar truss design and controller tuning optimizations are presented for comparison purposes., This work was partially supported by the FPI-2010/19 grant and the PAID-06-11 project from the Universitat Politècnica de València, projects TIN2011-28082 and ENE2011-25900 (Spanish Ministry of Economy and Competitiveness) and the GV/2012/073 (Generalitat Valenciana).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Are link-based and citation-based journal metrics correlated? An Open Access megapublisher case study

  • Orduña-Malea, Enrique|||0000-0002-1989-8477
  • Aguillo, Isidro F.
[EN] The current value of link counts as supplementary measures of the formal quality and impact of journals is analyzed, considering an open access megapublisher (MDPI) as a case study. We analyzed 352 journals through 21 citation-based and link-based journal-level indicators, using Scopus (523,935 publications) and Majestic (567,900 links) as data sources. Given the statistically significant strong positive Spearman correlations achieved, it is concluded that link-based indicators mainly reflect the quality (indexed in Scopus), size (publication output), and impact (citations received) of MDPI's journals. In addition, link data are significantly greater for those MDPI journals covering many subjects (generalist journals). However, nonstatistically significant differences are found between subject categories, which can be partially attributed to the "series title profile" effect of MDPI. Further research is necessary to test whether link-based indicators can be used as informative measures of journals' current research impact beyond the specific characteristics of MDPI., This research has been funded by the Valencian Regional Government (Spain), through the research project UNIVERSEO (Ref. GV/2021/141)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microstructural, physical, and sensory impact of starch, inulin and soy protein in low-fat gluten and lactose free white sauces

  • Guardeño Expósito, Luis Miguel
  • Hernández Carrión, María
  • Hernando Hernando, Mª Isabel|||0000-0002-3322-935X
  • Llorca Martínez, Mª Empar|||0000-0003-3346-3135
  • Quiles Chuliá, Mª Desamparados|||0000-0003-4991-6629
[EN] The microstructural, physical, and sensory properties of low-fat sauces made with different starches, soy protein, and inulin as a fat replacer were analyzed. Gluten-free waxy starches-rice and corn-were selected as well as soy protein to obtain sauces suitable for celiac and lactose intolerant consumers. Light microscopy was used to visualize the swollen starch granules dispersed in a protein-amylopectin-inulin phase. Inulin seemed to limit protein network development, which was related with a higher dispersion of starch granules within the sauce matrix. Therefore, the sauces made with inulin had a lower apparent viscosity (¿app) values (P < 0.05) in comparison with oil sauces. The sauces made with rice starches also exhibited a lower viscosity (P < 0.05) since these granules did not swell as corn granules do. All the sauces had a remarkable physical stability since there were no syneresis phenomena and color did not change significantly (P < 0.05) after 15 d of refrigeration storage (4 °C). Finally, the sensory test suggests that oil could be substituted by inulin in the preparation of low-fat sauces since no significant differences (P < 0.05) in texture and flavor were found. These results encourage further research to optimize the formulations of these types of alternative white sauces. Practical Application: Nowadays there is a great demand of ready-to-eat products due to new consumptions habits. In this context, it would be interesting to develop low-fat sauces with inulin that could be used in this type of products improving their nutritional profile. The requirement of processed food for specific groups of population, such as celiac and lactose intolerant consumers, makes it necessary to use gluten free starches and soy protein in the formulation of sauces. The characterization of structural, physical and sensory properties is required to understand the product acceptability and its behavior during its shelf life. © 2012 Institute of Food Technologists®., The authors are grateful for the FPU grant awarded to L. M. Guardeno and the economic support received from Univ. Politecnica de Valencia-project PAID-06-09-2871 and Generalitat Valenciana-project GV-2010/038.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Wireless sensor node for non-invasive high precision electrocardiographic signal acquisition based on a multi-ring electrode

  • Ye Lin, Yiyao|||0000-0003-2929-181X
  • Prats-Boluda, Gema|||0000-0002-9362-5055
  • Garcia-Casado, Javier|||0000-0003-1410-2721
  • Bueno Barrachina, José Manuel
  • Rodríguez de Sanabria Gil, Rafael
[EN] Concentric ring electrodes (CRE) have been proposed for sensing bioelectrical activity with high spatial resolution. Computational studies have revealed that the CRE dimensions are closely related to the electric dipole depth they can sense, but further experimental confirmation is needed. We aimed to develop and test a wireless multichannel ECG recording system based on a new flexible multi-ring electrode and to check the influence of CRE dimensions on the acquired signals. The system provided high-precision ECG signals by a simple procedure. The bipolar concentric ECG signal amplitude and SNR increase with the CRE¿s outer ring dimension. Differences in the signal morphologies, associated with different sensitivities to the location of the active dipoles, were also obtained in the case of diameters smaller than 34 mm. A system with several wireless sensor nodes developed could be easily used by clinical staff for non-invasive cardiac monitoring and diagnosis with high spatial and temporal resolution., Research supported in part by a grant from the Conselleria d'Educacio, Cultura I Esport, Generalitat Valenciana Conselleria - Spain (GV/2014/029); by a grant from the Universitat Politecnica de Valencia - Spain (SP20120490); and by the Ministry of Economy and Competitiveness - Spain and the European Regional Development Fund (DPI2015-68397-R (MINECO/FEDER)).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Combining haptics and inertial motion capture to enhance remote control of a dual-arm robot

  • Girbés-Juan, Vicent
  • Schettino, Vinicius
  • Demiris, Yiannis
  • Gracia Calandin, Luis Ignacio|||0000-0001-9258-9286
  • Solanes, J. Ernesto|||0000-0001-5011-4872
  • Tornero Montserrat, Josep|||0000-0003-1571-0251
[EN] High dexterity is required in tasks in which there is contact between objects, such as surface conditioning (wiping, polishing, scuffing, sanding, etc.), specially when the location of the objects involved is unknown or highly inaccurate because they are moving, like a car body in automotive industry lines. These applications require the human adaptability and the robot accuracy. However, sharing the same workspace is not possible in most cases due to safety issues. Hence, a multi-modal teleoperation system combining haptics and an inertial motion capture system is introduced in this work. The human operator gets the sense of touch thanks to haptic feedback, whereas using the motion capture device allows more naturalistic movements. Visual feedback assistance is also introduced to enhance immersion. A Baxter dual-arm robot is used to offer more flexibility and manoeuvrability, allowing to perform two independent operations simultaneously. Several tests have been carried out to assess the proposed system. As it is shown by the experimental results, the task duration is reduced and the overall performance improves thanks to the proposed teleoperation method., This research was funded by Generalitat Valenciana (Grants GV/2021/074 and GV/2021/181) and by the SpanishGovernment (Grants PID2020-118071GB-I00 and PID2020-117421RBC21 funded by MCIN/AEI/10.13039/501100011033). This work was also supported byCoordenacao de Aperfeiaoamento de Pessoal de Nivel Superior (CAPES Brasil) under Finance Code 001, by CEFET-MG, and by a Royal Academy of Engineering Chair in Emerging Technologies to YD.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Polymer- and Ionic Liquid-Containing Palladium: Recoverable Soluble Cross-Coupling Catalysts

  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Phosphine, palladacycle, and N-heterocyclic carbene palladium complexes are highly active homogeneous catalysts that can promote a wide range of CC and CN cross-coupling reactions. An evolution from homogeneous catalysis has been to anchor these complexes in a platform in such a way that the catalytic reaction still occurs in homogeneous phase, but the palladium complex can be recovered at the end of the reaction and reused to promote consecutive reactions. In the present review we describe those strategies to develop palladium complexes anchored to soluble polymers and ionic liquids showing the advantages and limitations of this approach to develop recyclable palladium catalysts., Financial support by the Spanish MICINN (H. G., CTQ2012-32315 and M. A., CTQ2010-18671), Universidad Politecnica de Valencia (S.N., PAID-06-11, no2095) and Generalitat Valenciana (H. G. Prometeo 2012/014 and S.N., GV/2013/040) is gratefully acknowledged. S.N. thanks the UPV for a lecturer contract (Programa Cantera)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Major QTL Located in Chromosome 8 of Cucurbita moschata Is Responsible for Resistance to Tomato Leaf Curl New Delhi Virus

  • Sáez-Sánchez, Cristina
  • Martínez, Cecilia
  • Montero-Pau, Javier
  • Esteras Gómez, Cristina|||0000-0002-8789-4363
  • Sifres Cuerda, Alicia Gemma|||0000-0002-9498-0083
  • Blanca Postigo, José Miguel|||0000-0002-5884-8624
  • Ferriol Molina, María|||0000-0002-6533-5720
  • López Del Rincón, Carmelo|||0000-0001-7459-1315
  • Picó Sirvent, María Belén|||0000-0001-7761-990X
[EN] Tomato leaf curl New Delhi virus (ToLCNDV) is a bipartite whitefly transmitted begomovirus, responsible since 2013 of severe damages in cucurbit crops in Southeastern Spain. Zucchini (Cucurbita pepo) is the most affected species, but melon (Cucumis melo) and cucumber (Cucumis sativus) are also highly damaged by the infection. The virus has spread across Mediterranean basin and European countries, and integrated control measures are not being enough to reduce economic losses. The identification of resistance genes is required to develop resistant cultivars. In this assay, we studied the inheritance of the resistance to ToLCNDV previously identified in two Cucurbita moschata accessions. We generated segregating populations crossing both resistant pumpkins, an American improved cultivar Large Cheese (PI 604506) and an Indian landrace (PI 381814), with a susceptible C. moschata genotype (PI 419083). The analysis of symptoms and viral titers of all populations established the same monogenic recessive genetic control in both resistant accessions, and the allelism tests suggest the occurrence of alleles of the same locus. By genotyping with a single nucleotide polymorphism (SNP) collection evenly distributed along the C. moschata genome, a major quantitative trait locus (QTL) was identified in chromosome 8 controlling resistance to ToLCNDV. This major QTL was also confirmed in the interspecific C. moschata x C. pepo segregating populations, although C. pepo genetic background affected the resistance level. Molecular markers here identified, linked to the ToLCNDV resistance locus, are highly valuable for zucchini breeding programs, allowing the selection of improved commercial materials. The duplication of the candidate region within the C. moschata genome was studied, and genes with paralogs or single-copy genes were identified. Its synteny with the region of chromosome 17 of the susceptible C. pepo revealed an INDEL including interesting candidate genes. The chromosome 8 candidate region of C. moschata was also syntenic to the region in chromosome 11 of melon, previously described as responsible of ToLCNDV resistance. Common genes in the candidate regions of both cucurbits, with high- or moderate-impact polymorphic SNPs between resistant and susceptible C. moschata accessions, are interesting to study the mechanisms involved in this recessive resistance., This work was supported by the Spanish Ministerio de Ciencia, Innovacion y Universidades, cofunded with FEDER funds [Project Nos. AGL2017-85563-C2-1-R and RTA2017-00061-C03-03 (INIA)] and by PROMETEO project 2017/078 (to promote excellence groups) by the Conselleria d'Educacio, Investigacio, Cultura i Esports (Generalitat Valenciana). CS is a recipient of a predoctoral fellowship from Generalitat Valenciana, cofunded by the Operational Program of the European Social Fund (FSECV 2014-2020) (Grant No. ACIF/2016/188). CM was a recipient of a postdoctoral Juan de la Cierva Formation (2014) fellowship from Spanish Ministerio de Ciencia, Innovacion y Universidades (Grant No. FJCI-2014-19817).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An Update on Crop ABA Receptors

  • Ruiz-Partida, Rafael
  • Lozano-Juste, Jorge|||0000-0001-7034-566X
  • Rosario, Sttefany M.
[EN] The hormone abscisic acid (ABA) orchestrates the plant stress response and regulates sophisticated metabolic and physiological mechanisms essential for survival in a changing environment. Plant ABA receptors were described more than 10 years ago, and a considerable amount of information is available for the model plant Arabidopsis thaliana. Unfortunately, this knowledge is still very limited in crops that hold the key to feeding a growing population. In this review, we summarize genomic, genetic and structural data obtained in crop ABA receptors. We also provide an update on ABA perception in major food crops, highlighting specific and common features of crop ABA receptors., This research was funded by the grants SP20180340 (PAID-06-18), from Universitat Politecnica de Valencia, and GV/2020/159, from Generalitat Valenciana, to J.L.-J. and FONDOCYT2018 2C1-182 grant from FONDOCYT to S.M.R. and J.L.-J.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of Hydrogen Annealing on the photocatalytic activity of diamond supported gold catalysts

  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Sempere Aracil, David
Fenton-treated diamond nanoparticles have been submitted to hydrogen reduction at 500 °C with the purpose of modifying the nature of the functional groups present on the diamond surface. The nature of the functional groups on the diamond samples was characterized by a combination of spectroscopic and analytical techniques. In particular, Fouriertransformed infrared spectroscopy, temperature-programmed desorption, and X-ray photoelectron spectroscopy (XPS) show the decrease in the population of carboxylic acids, esters, and anhydrides after hydrogen treatment. XPS also shows a decrease on the oxygen content after the hydrogen treatment of the diamond nanoparticles and lower electronegativity of the carbons as assessed by the lower binding energy values. Although Fentontreated diamond colloids in water changes the zeta potential from positive to negative values as a function of the pH, hydrogen annealing and the disappearance of the carboxyl groups determines that the zeta potential of the resulting sample remains positive in the complete pH range. Deposition of gold nanoparticles was carried out by the polyol method consisting on the reduction of HAuCl4 by hot ethylene glycol in the presence of the support. TEM analysis shows a variation of the average gold nanoparticle size that decreases after hydrogen reduction of carboxylic groups and becomes smaller for low gold loadings. The catalytic activity of the diamond supported gold nanoparticles as a function of the surface annealing treatment and gold loading was evaluated for the natural sunlight-assisted peroxidation of phenol by H2O2. It was observed that the most efficient sample was the one having lower gold nanoparticle size that was obtained for diamond samples reduced by hydrogen at 500 °C after the Fenton treatment and having low gold loading (0.05 wt %). Turnover frequencies above 2400 and 940 h−1 were obtained for phenol degradation and H2O2 decomposition, respectively., Financial support by the Spanish Ministry of Economy and Competitiveness (MINECO, Severo Ochoa program and CTQ 2012-32315), Universidad Politecnica de Valencia (PAID-06-11, no 2095) and Generalitat Valenciana (Prometeo 2013/014 and GV/2013/040).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Stevia Rebaudiana, Oligofructose and Isomaltulose as sugar replacers in marshmallows stability and antioxidant properties

  • Periche Santamaría, Angela
  • Castelló Gómez, María Luisa|||0000-0002-4889-1792
  • Heredia Gutiérrez, Ana Belén|||0000-0001-6629-9779
  • Escriche Roberto, Mª Isabel|||0000-0003-0180-0360
[EN] Consumers are increasingly demanding products with natural ingredients and functional properties. The replacement of conventional sugars with recently available sugars or sweeteners could result in the perception of candies as healthier products. Therefore, the objective of this work was to evaluate the influence of isomaltulose, oligofructose and stevia extracts on the physicochemical, mechanical, optical and antioxidant properties as well as the shelf life of marshmallows. A sensory test was carried out in order to evaluate the influence of these ingredients on the acceptance of this product. The instrumental and sensorial textural results indicate that the sucrose and glucose syrup in commercial marshmallows could be replaced by a mixture of isomaltulose, oligofructose and stevia. Adults found the new and the traditional marshmallows to be very similar. However, children only found similarities in terms of the texture. These new marshmallows, besides being more microbiologically stable, have added value due to their antioxidant properties. Practical ApplicationsSociety is becoming increasingly aware of the importance of nutrition in health, and this has a decisive impact on the proposals of the candy sector in terms of innovation and new product development. The main trends of the market are focused on eliminating the unhealthy ingredients in the formulations, such as sugars, and even incorporate active ingredients with functional properties, but without forgetting customer satisfaction. At present, the industry is using both intense and volume artificial sweeteners as conventional sugar substitutes. However, the food industry now has the possibility of using alternative natural sweeteners such as stevia, oligofructose and isomaltulose, with the added value of providing certain healthy benefits. The results of the present study could provide pertinent information to the confectionary industry that wishes to take on the challenge of developing candies with functional ingredients., The authors thank the Universitat Politecnica de Valencia (Spain) (for funding the project PAID 2011-ref: 2012 and the PhD scholarship), and the Generalitat Valenciana (Spain) (for the project GV/2013/029).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Targeted band gap creation using mixed sonic crystal arrays including resonators and rigid scatterers

  • Fuster García, Elíes|||0000-0002-0716-8960
  • Romero-García, Vicente|||0000-0002-3798-6454
  • Sánchez Pérez, Juan Vicente|||0000-0002-4473-8782
  • García-Raffi, L. M.|||0000-0003-3985-8453
[EN] Sonic crystals are periodic structures that have acoustic band gaps centred at frequencies depending on the lattice constant of the array and on the direction of the incident acoustic wave. To eliminate this dependence, this work presents designed mixed structures constructed with rigid scatterers and resonators embedded in air. Specifically, balloons filled with a blend of air and helium were used as resonators, showing experimental evidence about the resonant behavior of an array formed with these balloons. As a result, the authors obtain full band gaps in a predetermined range of frequencies desired., This work has been supported by Spain’s Interministerial Science and Technology Commission (Contract No. 200603097 and FEDER and by the Generalitat Valenciana) (Spain) under Grant No. GV/2007/191. The authors would also like to thank the R+D+i Linguistic Assistance Office at the Universidad Politécnica of Valencia for their help in revising this letter.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Molecular characterization of the cucumber (Cucumis sativus L.) accessions held at the COMAV s genebank

  • Valcarcel Germes, José Vicente|||0000-0002-7843-703X
  • Pérez De Castro, Ana María|||0000-0002-4949-3323
  • Peiró Barber, Rosa Mª|||0000-0002-3009-2343
  • Díez Niclós, Mª José Teresa De Jesús
[EN] The cucumber (Cucumis sativus L.) is an important crop worldwide. In the present study, the molecular genetic diversity of 131 Spanish accessions was analyzed using 23 simple sequence repeat (SSRs). Eighteen of these SSRs were polymorphic; the mean number of alleles, mean observed heterozygosity and mean polymorphic information content were 3.2, 0.065 and 0.229, respectively. Seven SSRs showed a polymorphic information content (PIC) ranging from 0.31 to 0.44, therefore they were reasonably informative. Around 60% of the alleles showed a frequency higher than 0.05, and only one allele in the SSR31399 showed a frequency lower than 0.01. In addition, three accession-specific alleles were found. A high proportion of variation among accessions was obtained. In no case all plants of any accession showed the same genotype and only 18 of 131 Spanish accessions had at least two plants with the same genotype. A cluster analysis did not show any relation with morphological types or geographical area. Therefore, these results demonstrated that molecular diversity of the cucumber did not reflect its phenotypic variability. Finally, this study provided information for the rationalization of the cucumber collection of the COMAV. Morphological traits, origin and molecular data were taken into account to select 47 accessions, six belonging to `French¿ type, 15 to `Long¿ type, and 24 to `Short¿ type. Phenotypic and molecular variability contained in the complete collection was conserved in the selected accessions, Partially funded by the Generalitat Valenciana (project GV/2012/080).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Survival of Lactobacillus salivarius CECT 4063 and Stability of Antioxidant Compounds in Dried Apple Snacks as Affected by the Water Activity, the Addition of Trehalose and High Pressure Homogenization

  • Burca-Busaga, Cristina Gabriela
  • Betoret Valls, Noelia|||0000-0002-3326-8797
  • Seguí Gil, Lucía|||0000-0002-2711-9445
  • Betoret Valls, María Ester|||0000-0002-9814-5042
  • Barrera Puigdollers, Cristina|||0000-0003-4408-3541
[EN] Survival of probiotic microorganisms in dried foods is optimal for water activity (a(w)) values between 0.1 and 0.3. Encapsulating and adding low-molecular weight additives can enhance probiotic viability in intermediatea(w)food products, but the effectiveness of sub-lethal homogenization is still not proven. This study evaluates the effect of 10% (w/w) trehalose addition and/or 100 MPa homogenization onLactobacillussalivariusCECT 4063 counts and antioxidant properties of apple slices dried to different water activity values (freeze-drying to aa(w)of 0.25 and air-drying at 40 degrees C to aa(w)of 0.35 and 0.45) during four-week storage. Optical and mechanical properties of dried samples were also analyzed. Freeze-drying had the least effect on the microbial counts and air drying at 40 degrees C to aa(w)of 0.35 had the greatest effect. Antioxidant properties improved with drying, especially with convective drying. Decreases in both microbial and antioxidant content during storage were favored in samples with higher water activity values. Adding trehalose improved cell survival during storage in samples with a water activity of 0.35, but 100 MPa homogenization increased the loss of viability in all cases. Air-dried samples became more translucent and reddish, rather rubbery and less crispy than freeze-dried ones., This research was funded by Generalitat Valenciana, project reference GV/2015/066 entitled "Mejora de la calidad functional de un snack con efecto probiotico y antioxidante mediante la incorporacion de trehalosa y la aplicacion de altas presiones de homogeneizacion".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The perception of heritage values and their analysis by using GIS tools in vernacular heritage landscapes

  • Altaba-Tena, Pablo|||0000-0002-9263-3600
[EN] The main objective of the study is to assess, independently of the scenic beauty, the importance and composition of the different attributes within a given landscape. For this purpose, the study focuses on Penyagolosa where we have selected three areas of evaluation to determine the importance of distance in the determination of heritage values of the landscape. Using Geographic Information Systems (GIS) determines what values are detectable on the basis of the terms of proximity and remoteness and how they are applied in three cases of assessment. Thus, 5 criteria have been set to analyze these values: 1. the overview of the landscape, 2. dominance or intensity of elements, 3. the aesthetic composition of space, 4. The selective interpretation of the visual and 5 variables. The fragility or alterations induced in the landscape. Ultimately, criteria are discussed from dynamic and static fields of the authenticity and integrity of the landscape and they affect how they neglect., This study has been funded by the Chair: Cátedra Diputación de Centros Históricos e Itinerarios Culturales de Castellón; Universitat Jaume I. This research has also been funded by the project “Crafts and Artisans”, from the Regional Government of Valencia, Spain. GV/2017/100.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Research Journey from National Systems of Innovation to National Systems of Entrepreneurship: Introducing the Sextuple Helix

  • López-Rubio, Pedro
  • Mas-Tur, Alicia
  • Roig-Tierno, Norat|||0000-0002-7980-3548
[EN] National systems of innovation (NSI) have attracted substantial interest from public administrations, the scientific community and international organizations. Innovation is a key factor for countries to be competitive in the today's global economy. Entrepreneurship is an innovation source that has gained importance in NSI research over the last few decades. This focus on entrepreneurship in the context of NSI has led scholars to propose novel concepts such as entrepreneurial ecosystems and the national system of entrepreneurship (NSE). This paper uses bibliometric methods and the Web of Science Core Collection (WoS CC) database to explore how entrepreneurship fits into NSI research and to study the increasing importance of entrepreneurship within this research field. The NSI conceptual framework is developed according to the most common keywords, and the most influential NSI studies are identified using the total number of citations and the ratio number of citations per year. Two sets of studies are analyzed: (1) older documents on traditional topics such as the origins and evolution of NSIs, the capacity of countries to innovate, and the relationships of institutions, different organizational forms, networking, production and competence building with innovation and (2) newer entrepreneurship research documents. Based on analysis of the most common keywords, the most influential studies and multiple entrepreneurship approaches, we propose a Sextuple Helix model as an analytical framework that brings together innovation and entrepreneurship., Alicia Mas Tur wishes to thank Project [GV/2021/121], funded by the Generalitat Valenciana. Norat Roig-Tierno wishes to thank Project [GV/2019/063], funded by the Generalitat Valenciana, and Grant RTI2018-093791-B-C22 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photochemical and photophysical properties of dibenzoylmethane derivatives within protein

  • Marín Melchor, Mireia
  • PARIS, CECILIA GERTRUDIS
  • Yamaji, Minoru
  • Lhiaubet, Virginie Lyria|||0000-0002-8205-8892
  • Miranda Alonso, Miguel Ángel
In the present work, three dibenzoylmethane derivatives in their beta-diketo form have been selected to investigate their photophysical and photochemical behavior upon interaction with human serum albumin (HSA). In organic solvents, absorption and phosphorescence emission spectra of the a-bromo derivative of avobenzone (BrAB) were similar to those of the a-methylated and a-propyl analogs (MeAB and PrAB). However, laser flash photolysis experiments revealed a different transient species centered at 350 nm, assigned to the radical obtained from a singlet excited state dehalogenation process. Interestingly, the transient absorption spectrum of BrAB within HSA showed the typical features of the beta-diketone triplet excited state. In the case of MeAB and PrAB derivatives, binding to HSA was associated with a significant increase of their triplet lifetimes as compared to acetonitrile. Finally, the Norrish type II process has been considered as a model to evaluate the influence of the protein microenvironment on the photoreactivity. In this context, photodegradation of PrAB in aerated solutions, to give avobenzone (AB), has been monitored by UV spectroscopy. Interestingly, the quantum yields of AB formation were markedly dependent on the reaction medium (1.4 10(-2) in acetonitrile and 3.9 10(-2) within albumin medium); by contrast, chemical yields of ca. 50% were obtained in both cases., Spanish Government (CTQ2009-13699 project, Ramon y Cajal contract to V. L.-V. and JAE pre-doc contract to M. M.), Generalitat Valenciana (Prometeo Program 2008/090 and GV/2009/051 projects) and Universidad Politecnica de Valencia (PAID 06-08 project) are gratefully acknowledged for financial support. M. Y. is grateful for a financial support, Grant-in-Aid for Scientific Research (KAKENHI) from JSPS.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Deactivation of Cationic Cu-I and Au-I Catalysts for A(3) Coupling by CH2Cl2 : Mechanistic Implications of the Formation of Neutral Cu-I and Au-I Chlorides

  • Grirrane ., Abdessamad
  • Álvarez, Eleuterio
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Corma Canós, Avelino|||0000-0002-2232-3527
Care should be exercised when using CH2Cl2 as a solvent for reactions in which amines are a reagent, since undesirable deactivation of cationic copper(I) and gold( I) catalysts to form the corresponding inactive neutral chloride complexes [LMCl] (M=Cu or Au) can occur as a result of the generation of hydrogen chloride in the medium. Cu-I and Au-I deactivation has been proved for the Mannich three-component coupling reaction. A series of CuI and AuI complexes with potential mechanistic implications were isolated and characterized by X-ray crystallography., Financial support by the Spanish Ministry of the Economy and Competitiveness (Severo Ochoa and CTQ2012-32315) and the Generalidad Valenciana (Prometeo 2012-014) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Diseño y desarrollo de un dispositivo acústico detector de obstáculos para personas con discapacidad visual, Design and development of an acoustic object detector device for blind people

  • Dunai, Larisa|||0000-0002-5076-0695
  • Lengua, Ismael|||0000-0002-4320-8325
  • Brusola Simón, Fernando|||0000-0002-4147-3862
  • Peris Fajarnes, Guillermo|||0000-0001-9215-9091
[EN] The main design and development characteristics of an acoustic object device for blind people are presented. The study focuses on the presentation of the main steps of device design, the motivation why this product is important and the development of the first prototype. The results from the device evaluation yield to demonstrate than electronic elements using for vehicles can be used for small object detector devices for blind people and incorporated into a small sunglass. Good design helps engineers to develop the product in an easy way.The work remarks the main characteristics for a good device design and intends to inspire designers to become involved in the use of integrated technologies to promote independent lives for visually disabled people and promote an esthetically adequate design., [ES] Se describen las características más significativas del diseño y desarrollo de un dispositivo acústico detector de obstáculos para las personas con discapacidad visual. El estudio está enfocado en la descripción de las etapas de diseño, la motivación de porqué es importante el diseño, y el desarrollo del primer prototipo. Los resultados obtenidos del dispositivo tienden a demonstrar que la tecnología utilizada para la detección de obstáculos para los vehículos puede ser utilizada en pequeños dispositivos para personas con discapacidad visual. Un buen diseño les permite a los ingenieros desarrollar los productos de forma más sencilla. El trabajo remarca las principales características de un buen diseño industrial y pretende inspirar a los diseñadores para involucrarse en la integración de tecnologías para mejorar la vida de las personas con discapacidad visual teniendo en cuenta el aspecto estético., Los autores agradecen a la Generalitat Valenciana (proyecto GV/2014/015 - proyectos emergentes) y a la Comisión Europea (Grant FP6 Programme).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mixed (Fe2+ and Cu2+) double metal hexacyanocobaltates as solid catalyst for the aerobic oxidation of oximes to carbonyl compounds

  • Garcia-Ortiz, Alma
  • Reguera, Edilso
  • Grirrane, Abdessamad|||0000-0001-5388-3554
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
Mixed Iron and copper hexacyanocolbatate is a suitable heterogeneous and recoverable catalyst for the aerobic oxidn. of oximes to the corresponding ketone. The reaction can be conveniently carried out in water-&#8203;ethanol 1:1 mixt. as solvent. The time-&#8203;conversion plots shows an induction period that do not correspond to the leaching of metal ions or to the damage of the crystal structure of the material. The proposed reaction mechanism is based on the cooperation of the Lewis acidity of iron with the ability of copper to interact with oxygen. Given the remarkable stability of metal hexacyanocobaltates and the large diversity of metals that can contain, the authors' reports opens the way for the general use of these affordable and accessible solids as heterogeneous catalysts., Alma Garcia thanks Mexican CONACYT for financial support for her stay at Valencia. E.R. thanks the support provided by CONACyT through the Projects 129048 and 174247.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Numerical investigation on slender concrete-filled steel tubular columns subjected to biaxial bending

  • Espinosa Minguet, Agustín Rafael|||0000-0001-8070-3344
  • Romero, Manuel L.|||0000-0001-5247-4767
  • Albero, Vicente
  • Mund, Maximilian
  • Kleiboemer, Inka
  • Meyer, Patrick
  • Schaumann, Peter
[EN] The behaviour of concrete-filled steel tubular columns under axial compression or combined compression and uniaxial bending has been deeply investigated in past years by means of experimental testing and numerical simulations. However, the behaviour of these columns under biaxial bending has been scarcely investigated, in fact, a very limited number of experimental tests are available for this loading situation. Additionally, the current provisions in EN1994-1-1 for biaxial bending need to be revised, in order to be aligned with the new methods that are being proposed for the new generation of Eurocodes. This paper presents the outcome of a numerical investigation on the load-bearing capacity of slender concrete-filled steel tubular columns subjected to biaxial bending. The focus is on creating and validating a numerical model for room temperature that can predict the behaviour of this type of columns under biaxial bending, which may be used for evaluating the current design guidelines in EN1994-1-1. The numerical model is validated by comparison against experimental tests from the literature, proving that it predicts the ultimate load of slender columns with good accuracy. Different eccentricities about the minor and major axis and different moment ratios are considered, so that this investigation contains cases for both uniaxial and biaxial bending. With the help of this numerical model, the experimental results are extended to generate more cases, in order to assess the accuracy of the current provisions in EN1994-1-1 for concrete-filled steel tubular columns subjected to biaxial bending., The authors would like to express their sincere gratitude to the “Conselleria d’Educació, Investigació, Cultura i Esport” of the Valencian Community (Spain) for the help provided through the project GV/2017/026.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sound diffusers based on sonic crystals

  • Redondo, Javier|||0000-0002-5507-7799
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
  • Woszczyk, Wieslaw
A sound diffuser is proposed based on sonic crystals, structures formed by a periodic distribution of cylindrical scatterers in a host medium, which is usually air. The diffuser is a so-called biperiodic structure, as formed by two arrays of sonic crystals with slightly different periodicities. Large diffusivity at low frequencies is achieved when the typical scale of the blocks is much larger than the periodicity of the crystals, determined by its lattice constant. An interpretation of the low frequency behavior of the diffuser is given in the homogenization limit in terms of multiple reflections and interference between the fields scattered by the different blocks. It is also shown that sonic crystal based diffusers enhance time spreading in comparison with other conventional diffusers., We acknowledge fruitful discussions with George Massenburg and Brett Leonard at McGill University, and Martin Pilchner of Pilchner-Schoustal International in Toronto. This work was financially supported by the Spanish Ministerio de Economia y Competitividad through Project FIS2011-29731-C02-02 and by Generalitat Valenciana through GV/2011/055.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Interaction diagram based method for fire resistance design of eccentrically loaded concrete-filled steel tubular columns

  • Albero, V|||0000-0001-7193-9232
  • Espinós Capilla, Ana|||0000-0001-7335-4676
  • Romero, Manuel L.|||0000-0001-5247-4767
  • Wang, Y.C.
  • Renaud, Christophe
  • Schaumann, P.
  • Nigro, E.
[EN] Previous investigations have highlighted that the current design method in Annex H of EN 1994-1-2 for the calculation of fire resistance of slender concrete-filled steel tubular (CFST) columns was unsafe, which led to the appointment of a Project Team (SC4.T4) by the European Committee for Standardization (CEN) to develop a new Annex H in EN1994-1-2 to replace the existing one. This paper presents the outcome of the Project Team, a new simplified fire design method for CFST columns, focusing in particular on eccentrically loaded columns for which there had been no systematic research. An extensive parametric study consisting of 5046 analysis cases has been carried out, covering all the practical ranges of application of CFST columns. The method accounts for minor and major axis eccentricities with large eccentricities up to e/D = 1. Different bending moment diagrams, ranging from single curvature to double curve bending, were considered. The proposed new design method is in line with the cold design method in EN1994-1-1 and achieves the criteria of acceptance for safe and accurate design of structures in fire which were set by the CEN/TC250 Horizontal Group Fire., The authors would like to express their sincere gratitude to the "Conselleria d'Educacio, Investigacio, Cultura i Esport" of the Valencian Community (Spain) for the help provided through project GV/2017/026. The authors also acknowledge the funding received from the European Committee for Standardization (CEN) for the Project Team SC4.T4 of CEN/TC250, through the grant agreement CEN/2014-02 Mandate M/515 Phase 1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrochemical Study of a Simulated Spent Pickling Solution

  • García Gabaldón, Montserrat|||0000-0003-4254-6733
  • Ortega Navarro, Emma María|||0000-0001-6902-018X
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • Carrillo Abad, Jordi
[EN] The electrochemical behaviour of the main components of the rinsing pickling solutions of the hot dip galvanizing industry, Zn(2+) and Fe(2+) in HCl, was studied by cyclic voltammetry. The effect of different variables (such as the scan rate, the inversion potential, the addition of zinc, stirring of the solution and the presence of iron) on the current-potential curves was studied. The electrochemical reduction of zinc proceeded by a typical nucleation process. Decreasing the HCl concentration enhanced the zinc UPD process because of the less influence of the hydrogen evolution reaction (HER), and a prepeak corresponding to the zinc UPD process was observed previously to the zinc OPD step. The effect of the scan rate on the OPD peak was studied and showed that the Zn(2+) reduction was an irreversible process which was not only controlled by diffusion but also charge transfer kinetics. The diffusion coefficient of zinc was calculated (1.66. 10(-9) m(2) s(-1)). In view of iron deposition, it was confirmed that the pH is an essentially important factor and at low pH values was virtually impossible to deposit iron. The electrochemical study of mixtures containing both zinc and iron showed that the presence of zinc produced an inhibition of the iron deposition process which was confirmed by the observation of the deposits. The SEM images revealed only the presence of zinc grains. However, if the ratio Fe(II)/Zn(II) was higher, the voltammograms main features were more similar to those obtained for pure iron solutions., Montserrat Garcia Gabaldón wants to express their gratitude to the Universidad Politecnica de Valencia for the economical support in the project reference: PAID-06-08, and to the Generalitat Valenciana for the financing of the project reference: GV/2010/029.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Multivariate statistical technique over QoS variables to analyze video quality metrics on IEEE 802.11ac networks

  • García-Pineda, Miguel
  • Felici-Castell, Santiago
  • Segura-Garcia, Jaume
[EN] We present the results from a measurementbasedperformance evaluation of wireless networks basedon IEEE 802.11ac standard in an indoor environment, withthe aim to analyze their performance under high definitionstreaming video applications. We focus our study on analyzingthe highest performance of these standards using off-theshelfequipment as well as the behavior of Quality of Servicevariables and how they affect to the video quality. Thus, wehave analyzed and measured these variables and have applieda multivariate statistical technique, called Factor Analysis,and finally discuss their behavior., This work was supported by the Universitat de Valencia under the projects UV-INV-PRECOMP14-207134, UVINVAE15-339582, by the Generalitat Valenciana under the project GV-2016-002 and by the Ministry of Economy under the project BIA2016-76957-C3-1-R
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cooperative human-robot polishing for the task of patina growing on high-quality leather shoes

  • Borrell, Jorge
  • González, Alejandra
  • Pérez-Vidal, Carlos
  • Gracia Calandin, Luis Ignacio|||0000-0001-9258-9286
  • Solanes, J. Ernesto|||0000-0001-5011-4872
[EN] A patina is essentially the weathered look a piece of leather takes on as it ages. The patina finishing aspect can be also generated or grown artificially by scrubbing the leather surface with specific products. These kinds of manual finishing operations on small objects are delicate and regularly need slight corrections carried out by skilled artisans, which adds complexity to the process automation and implies various key aspects to consider. This research presents a novel approach for automatic and semiautomatic shoe patina growing in the footwear industry using a new co-creative method based on cooperative robotics. The system automates the process in pursuit of operator time-saving without reducing the work finishing quality. For this purpose, the use of a collaborative robot with a built-in constant contact force control and a collaborative tool are used in this research. The use of both tools in complementarity with the knowledge of the craftsman leads the robot end-effector adaptation to the inherent curved surfaces over the shoe. Besides, some orientation corrections are applied based on the CAD model for the task to be accurately accomplished. The solution has been successfully integrated in a real production line, and it is currently in use., The authors want to thank Bespoke Factory Group (bespokefactory.com) for funding this project, CFZ Cobots (cfzcobots. com) for their technical support on robotics and mechanical design, and DESINOPE (desinope.com) for their technical support on process design related with the shoe industry. Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work was supported by Bespoke Factory Group bespokefactory.com.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

One-dimensional diesel spray modeling of multicomponent fuels

  • Pastor, José V.|||0000-0003-4113-4681
  • García-Oliver, José M|||0000-0002-2676-9681
  • Pastor Enguídanos, José Manuel|||0000-0003-4458-0353
  • Vera-Tudela Fajardo, Walter Martin
[EN] The present work reports a one-dimensional model to predict the liquid length and spray penetration of diesel sprays when using blends of single-component fuels. A high-pressure liquid-vapour equilibrium has been implemented by means of fugacity coefficients, together with the hypothesis of a real-gas mixture to calculate the partial enthalpy of each component. The model has been validated in a first step by means of an experimental study using binary blends of n-decane and n-hexadecane, where the temporal evolution of the liquid length and vapor spray penetration have been measured. Results show that the model predicts adequately the spray penetration for the different fuels at various conditions. A six-component fuel has also been investigated. Results indicate that this fuel has a very similar evaporative behavior to n-hexadecane, which is confirmed by both experiments and model predictions., Part of this work has been developed within the frame of project B03T02 Modelling of Emission Formation and Exhaust Gas Aftertreatment, Multicomponent diesel Combustion Modelling and Validation with financial support of the "COMET K2-Competence Centres for Excellent Technologies Programme" of the Austrian Federal Ministry for Transport, Innovation and Technology (BMVIT), the Austrian Federal Ministry of Economy, Family and Youth (BMWFJ), the Austrian Research Promotion Agency (FFG), the Province of Styria, and the Styrian Business Promotion Agency (SFG). Thanks are also given to the supporting industrial and scientific project partners, namely Kompetenzzentrum-Das Virtuelle Fahrzeug Forschungsgesellschaft mbH (ViF), AVL List GmbH, OMV Refining and Marketing GmbH and Institute for Internal Combustion Engines and Thermodynamics (IVT) Graz University of Technology. Support for this research was partially provided by the Generalitat Valenciana inside the program Ajudes per a la realitzacio de projectes d'I+D per a grups de investigacio emergent (reference GV/2013/041), which is gratefully acknowledged. Also, the authors would like to thank the Pontificia Universidad Catolica del Peru for financing the first year of studies of W. Vera-Tudela and making it possible for him to start his program of PhD at the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Concurrent Validity of the Inertial Measurement Unit Vmaxpro in Vertical Jump Estimation

  • Jimenez-Olmedo, Jose M.
  • Pueo, Basilio
  • Villalon-Gasch, Lamberto
  • Mossi García, José Manuel|||0000-0001-9083-3476
[EN] The aim of this study was to evaluate if the inertial measurement unit (IMU) Vmaxpro is a valid device to estimate vertical jump height (VJH) when compared to a motion capture system (MoCAP). Thirteen highly trained female volleyball players participated in this study which consisted of three sessions. After a familiarization session, two sessions comprised a warm-up followed by ten countermovement jumps, resting two min between each attempt. Jump height was measured simultaneously by Vmaxpro using take-off velocity and MoCAP using center-of-mass vertical excursion. Results show significant differences in jump height between devices (10.52 cm; p < 0.001; ES = 0.9), a very strong Spearman's correlation (r(s) = 0.84: p < 0.001), and a weak concordance correlation coefficient (CCC = 0.22; rho = 0.861; C-b = 0.26). Regression analysis reveals very high correlations, high systematic error (8.46 cm), and a nonproportional random error (SEE = 1.67 cm). Bland-Altman plots show systematic error (10.6 cm) with 97.3 % of the data being within the LoA. In conclusion, Vmaxpro can be considered a valid device for the estimation of VJH, being a cheaper, portable, and manageable alternative to MoCAP. However, the magnitude of systematic error discourages its use where indistinguishable data from Vmaxpro and MoCAP are used unless the corresponding specific fitting equation is applied., This work was supported by Generalitat Valenciana (grant number GV/2021/098).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Metal nanoparticles supported on two-dimensional graphenes as heterogeneous catalysts

  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Dhakshinamoorthy, Amarajothi
[EN] The catalytic activity of metal nanoparticles (MNPs) is highly dependent on the nature of the support. In addition to the role of particle size stabilization in decreasing the spontaneous growth of small MNPs, the main role of the support is to cooperate by providing efficient pathways that lead to the target product. Thus, the necessary requirements for supports include a large surface area, strong metal-support interaction, and the presence of active sites that participate in the reaction mechanism. Active carbons as well as organic polymers and large surface area inorganic metal oxides are typical insoluble solids that are used frequently as supports. Furthermore, the recent availability of suspensions of graphene oxide (GO), reduced GO, and other graphene-based materials (Gs) has provided new opportunities for the development of supported MNPs as catalysts. As supports, Gs combine several useful properties that are not encountered in classical solid supports. Gs comprise sheets that are a single carbon atom in thickness, which approaches the physical limit for a two-dimensional (2D) surface in which MNPs can be deposited. Therefore, Gs are among the solids with the highest possible surface area and due to their single layer morphology, they are readily dispersed in a liquid phase with the appearance of homogeneous catalyst, but they are easily recovered by filtration or centrifugation. In addition, Gs may cooperate with the catalytic cycle involving MNPs in at least four distinctive ways: (i) by strong adsorption of the substrates and reagents near the MNP; (ii) via d-&#960; metal support interaction, which influences the electron density of the MNP; (iii) promoting substrate reactivity by giving or withdrawing the electron density from the substrate; and (iv) by making specific catalytic sites available on the G nanosheet due to defects, oxygenated functional groups, or the presence of dopants. This review highlights the specific features derived from the morphology and characteristics of Gs, as well as the different catalytic behaviors of G-supported MNPs compared with related catalysts. One of the aims of this review is to provide a reference to indicate best practices as well as suggesting benchmark reactions to evaluate the catalytic activity of different materials. Considering the growth in the use of G as supports and the unique features obtained by employing 2D Gs as supports for MNPs, the present review has implications in the fields of catalysis, biocatalysis, and material science. © 2016 Elsevier B.V., ADM thanks University Grants Commission (UGC), New Delhi for the award of an Assistant Professorship under its Faculty Recharge Programme. ADM also thanks the Department of Science and Technology, India for financial support through the Fast Track project (SB/FT/CS-166/2013). Financial support from the Spanish Ministry of Economy and Competitiveness CTQ2012-32315 and CTQ2014-53292-R(MINECO, Severo Ochoa program and CTQ2012-32315) and Generalitat Valenciana (GV/2013/040 and Prometeo 2014/014) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A large-eddy simulation of diesel-like gas jets

  • Hoyas, Sergio|||0000-0002-8458-7288
  • Gil, A.|||0000-0001-7192-6992
  • Mompó Laborda, Juan Manuel
  • Khuong ., Anh Dung
[EN] Some aspects of the transient evolution of diesel-like gas jets by means of large-eddy simulation (LES) are discussed in this work. In order to understand the relationship between the inlet boundary condition and the development of the turbulent motions of the diesel sprays, a 3D injection chamber is simulated. The main assumption of the setup is the turbulent gas jet theory hypothesis applied to the inlet boundary conditions. Validation of the results is achieved by comparing with both experimental diesel spray measurements and trusted Reynolds-averaged Navier-Stokes (RANS) simulations. Results show that reasonable simulation of turbulent patterns from one diameter distant from the inlet boundary condition is achieved. Copyright © 2011 Inderscience Enterprises Ltd., This research has been funded by the Spanish Government in the frame of the Project ‘Métodos LES para la simulación de chorros multifásicos’, Ref. ENE2010-18542. The authors also acknowledge the financial support of the Universidad Politécnica de Valencia under the contract Reference PAID-2759 and the Generalitat Valenciana, under the contract GV/2010/039. We are also grateful to Dr. Franciso Javier Salvador and Dr. José Manuel Pastor for providing experimental data and fruitful advices. In addition, we gratefully acknowledge helpful discussions with many researchers in CMT-Motóres Térmicos, especially Ms. Palma González and Ms. Mariany Chávez.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Indirect charge transfer of holes via surface states in ZnO nanowires for photoelectrocatalytic applications

  • Batista-Grau, P.
  • Fernández Domene, R. M.
  • Sánchez-Tovar, R.
  • Solsona, B.
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] In this work, ZnO nanowires with high aspect ratio were obtained by fast and simple electrochemical anodization. Morphological, structural and photoelectrochemical characteristics of the synthesized ZnO nanowires were evaluated by using different techniques: field emission scanning electron microscopy, atomic force microscopy, high resolution transmission electron microscopy, Raman spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, UV-VIS spectroscopy, Mott-Schottky analysis and photoelectrochemical impedance spectroscopy. The synthesized ZnO nanowires presented high roughness and high crystallinity. Besides, surface defects were identified in the sample. The value of the donor density (ND) was in the order of 1019 cm-3 in the dark and 1020 cm-3 under illumination. In addition, the ZnO nanowires presented good photosensibility, with a photocurrent density response 85 times higher than a ZnO compact layer, and lower resistance to charge transfer. The charge transfer processes taking place at the ZnO/electrolyte interface were studied, since these processes strongly influence the photoelectrocatalytic efficiency of the material. According to the results, the charge transfer of holes in the synthesized ZnO nanowires occurs indirectly via surface states. In this regard, surface states may be an important feature for photoelectrocatalytic applications since they could provide lower onset voltages and higher anodic current densities., Authors would like to express their gratitude to the Generalitat Valenciana and to the European Social Fund for their financial support within the subvention GJIDI/2018/A/067. Authors also thank to project co-funded by FEDER operational programme 2014-2020 of Comunitat Valenciana (IDIFEDER/18/044). Finally, authors thank to Ministerio de Ciencia e Innovacion-Agencia Estatal de Investigacion (PID2019-105844RB-I00/AEI/10.13039/501100011033) and MINECO for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) co -financed by the European Social Fund. Authors would also like to ex-press their gratitude for the financial support to the Generalitat Valenciana (GV/2021/011). Authors also thanks MINECO for MAT2017-84118-C2-1-R MCIN/AEI/10.13039/501100011033/project and FEDER Una manera de hacer Europa.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Uncovering the potential of Twitch as a source for social media metrics

  • Orduña-Malea, Enrique|||0000-0002-1989-8477
  • Lopezosa, Carlos
[EN] The social live streaming service Twitch was launched in 2008 as Justin.tv, rebranded as Twitch Interactive in 2011, and acquired by Amazon in 2014. Although launched originally as a portal to broadcast videogames, Twitch currently hosts a wide range of content, including science and technology channels. Yet, despite growing interest in this online video sharing platform, Twitch¿s potential for the study of science videos has been underexploited to date. This paper seeks to go some way to remedying this by studying the potential of Twitch as a data source for social media academic metrics. To do so, a scientometrics-inspired framework (the OBA framework) is proposed to integrate the analysis of Twitch, science videos and research organizations under a common conceptual space. Then, a science-related Twitch channel ¿ National Aeronautics and Space Administration (NASA) ¿ is used as a case study. We analyse 197 videos published by NASA between March 2017 and December 2022, as well as 51,935 clips created from NASA videos. Data were collected from the official Twitch API, which is also analysed to identify the units and metrics available and the channel¿s performance in retrospective quantitative studies (i.e., non-live broadcasts). The results show that Twitch allows in-depth metric analyses of science videos to be undertaken, facilitating identification of both the activity and output-level impact of a scientific organization such as NASA. However, the Twitch API presents a few constraints, due, in the main, to the limited availability of many metrics that are restricted in time range, quantity, accuracy, or access, and which as such limit comprehensive retrospective studies. Despite these technical limitations, it is estimated that Twitch offers considerable potential for the study of science-related activity. The OBA model proposed facilitates the analysis of the activity of specific scientific agents (not only organizations but journals or other aggregates) under a conceptual framework based on approaches applied in quantitative studies of science., This project has been supported by the project UNIVERSEO (Ref. GV/2021/141), funded by the regional government (Generalitat) of Valencia (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multiplication operators in Kothe-Bochner spaces

  • Calabuig, J. M.|||0000-0001-8398-8664
  • Sánchez Pérez, Enrique Alfonso|||0000-0001-8854-3154
  • Rodriguez, J.
Let X be a Banach space and E an order continuous Banach function space over a finite measure mu. We prove that an operator T in the Kothe-Bochner space E(X) is a multiplication operator (by a function in L(infinity)(mu)) if and only if the equality T(g < f, x*> x) = g < T(f), x*> x holds for every g is an element of L(infinity)(mu), f is an element of E(X), x is an element of X and x* is an element of X*. (C) 2010 Elsevier Inc., J.M. Calabuig was supported by MEC and FEDER (project MTM2008-04594) and Generalitat Valenciana (project GV/2009/102). J. Rodriguez was supported by MEC and FEDER (project MTM2008-05396) and Fundacion Seneca (project 08848/PI/08). E.A. Sanchez-Perez was supported by MEC and FEDER (project MTM2009-14483-C02-02). The authors were also supported by Universidad Politecnica de Valencia (project PAID-06-08-3093).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The effect of sepiolite on the compatibilization of polyethylene thermoplastic starch blends for environmentally friendly films

  • Samper, María-Dolores|||0000-0002-5102-8412
  • Fenollar, Octavio|||0000-0003-4323-7414
  • Balart, Rafael|||0000-0001-5670-7126
  • Dominici, F.
  • Kenny, J. M.
[EN] Green polyethylene is a new and attracting polymer from biobased resources (sugarcane) and identical properties to petroleum-based polyethylene. Its potential in the packaging industry is really promising. In this work, we report the use of different compatibilizer systems for green polyethylene (from sugarcane) and thermoplastic starch (30 wt% TPS) in order to increase ductile mechanical properties and biodegradable content. Typical petroleum-based graft copolymer of polyethylene with maleic anhydride (PE-g-MA) is used as reference compatibilizer, and new compatibilizer systems are developed using sepiolite. The obtained results show that sepiolite-based compatibilizers provide good compatibilization properties as observed by a remarkable increase in elongation at break and a noticeable size reduction of the TPS domains dispersed in the green polyethylene matrix as observed by scanning electron microscopy (SEM)., This study has been funded by the ‘‘Conselleria d’Educacio´, Cultura i Esport’’—Generalitat Valenciana (Reference number: GV/2014/008). Authors thank Tolsa S.A for kindly supply sepiolite for this study and Microscopy Services at UPV for helping in using SEM and TEM techniques.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental blood glucose interval identification of patients with type 1 diabetes

  • Laguna Sanz, Alejandro José
  • Rossetti, Paolo
  • Ampudia Blasco, F. Javier
  • Vehí, Josep
  • Bondía Company, Jorge|||0000-0001-7286-3719
[EN] Many problems are confronted when characterizing a type 1 diabetic patient such as model mismatches, noisy inputs, measurement errors and huge variability in the glucose profiles. In this work we introduce a new identification method based on interval analysis where variability and model imprecisions are represented by an interval model as parametric uncertainty. The minimization of a composite cost index comprising: (1) the glucose envelope width predicted by the interval model, and (2) a Hausdorff-distance-based prediction error with respect to the envelope, is proposed. The method is evaluated with clinical data consisting in insulin and blood glucose reference measurements from 12 patients for four different lunchtime postprandial periods each. Following a “leave-one-day-out” cross-validation study, model prediction capabilities for validation days were encouraging (medians of: relative error = 5.45%, samples predicted = 57%, prediction width = 79.1 mg/dL). The consideration of the days with maximum patient variability represented as identification days, resulted in improved prediction capabilities for the identified model (medians of: relative error = 0.03%, samples predicted = 96.8%, prediction width = 101.3 mg/dL). Feasibility of interval models identification in the context of type 1 diabetes was demonstrated., The research leading to these results has received funding from the Spanish Ministry of Science and Innovation under grant DPI2010-20764-C02-01, the European Union Seventh Framework Programme (FP7/2007–2013) under grant agreement FP7-PEOPLE-2009-IEF, Ref 252085 and the GeneralitatValenciana through Grant GV/2012/085. The authors acknowledge the collaboration of Sara Correa, Geles Viguer and Pepa Gabaldón from the Diabetes Reference Unit in the Clinic University Hospital of Valencia, and the selfless participation of all the patients involved in the experiments from which data were obtained.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Immersive virtual reality to visualise the visible and infrared layer of a medieval altarpiece

  • García, Greta
  • Contreras, Gemma
  • Juanes, David
  • Saiz Mauleón, María Begoña|||0000-0002-8650-0916
  • SORIANO BALLESTER, ALFONSO
[EN] This article describes the conception, development and implementation process of an interactive, immersive virtual reality experience for a museum environment, which allows viewers to virtually explore the 'Retablo de San Jorge del Centenar de la Ploma' in detail and in its entirety. This altarpiece is a pivotal work in the International Valencian Gothic style. It is also an example of Relocated Heritage, which has belonged to the Victoria & Albert Museum in London since 1864. Currently, it is exhibited there in the room housing the Raphael Cartoons. The fact that it is impossible to physically view this work in the Museo de Bellas Artes de Valencia along with other medieval Valencian Gothic altarpieces has motivated the creation of this virtual reality experience. This will enable researchers and visitors interested in this period to virtually examine the work. To produce this experience, different data-gathering technology has been used, such as visible and infrared radiation, photogrammetry and computer design programs like Blender and Unreal Engine. For the viewing, high-range computer equipment and virtual reality headsets have been implemented, which totally immerse the user in the created environment. In this experience, the viewer is taken on an aerial tour of virtually reconstructed 15th century Valencia and finally brought to the altarpiece, where a close examination can be made. This examination implements both the visible light spectrum and that of infrared radiation, enabling the contemplation of the iconography of each of its scenes and characters and the detailed study of the techniques used in the creative process of this emblematic altarpiece., Authors would like to thank the Victoria & Albert Museum - Research project by the Generalitat Valenciana titled: 'The International Valencian Gothic. The altarpiece of Saint George of Centenar de la Ploma and other related key works for study, scientific analysis and/or identification of the authors' (GV/2018/154) - Generalitat Valenciana (Presidencia de GVA - Direccion General de Patrimonio -IVCR+i) and Pascual Merce professional photographer, for the realization of the infrared photography.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of temperature regime on endocrine parameters and vitellogenesis during experimental maturation of European eel (Anguilla anguilla) females

  • Pérez Igualada, Luz María|||0000-0002-6678-7446
  • Peñaranda, D.S.|||0000-0002-0861-976X
  • Asturiano, Juan F.|||0000-0002-6441-5294
  • Dufour, S.
  • Baloche, S.
  • Palstra, A. P.
  • Van den Thillart, G.E.E.J.M.
[EN] We examined the effect of temperature in European silver eels during their maturation induced by injections of carp pituitary extract on endocrine parameters: pituitary fshß and lhß expression, plasma 17ß-estradiol (E2) and vitellogenin, estrogen receptor 1 (esr1), and vitellogenin 2 (vtg2) expression in liver. A variable thermal regime (T10) that increased from 10° to 14° and 17 °C was compared with a constant 20 °C regime (T20) during 12. weeks. T10 caused a faster development until week 8, higher fshß, lhß, esr1 expression, and higher E2 levels. The results strongly suggest that T10 is inducing a higher endogenous FSH level which increases the E2 circulating level during vitellogenesis. A variable thermal regime induced an fshß expression and E2 profile in vitellogenic hormonally matured eel females that were more similar to the profile observed in other naturally maturing fish. © 2011 Elsevier Inc., This study was funded from the European Community’s 7th Framework Programme under the Theme 2 ‘‘Food, Agriculture and Fisheries, and Biotechnology’’, Grant Agreement No. 245257 (Pro-Eel) and Generalitat Valenciana through the GV/2007/202 project and ACOMP/2011/229. D.S. Peñaranda has a postdoc grant from the Universitat Politècnica de València (CE-01-10). The authors would like to thank M. Nieveen for technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Path Planning Algorithm for a Dynamic Environment Based on Proper Generalized Decomposition

  • Falcó, Antonio
  • Hilario, Lucía
  • Montés, Nicolás
  • Mora, Marta C.
  • Nadal, Enrique|||0000-0002-2808-298X
[EN] A necessity in the design of a path planning algorithm is to account for the environment. If the movement of the mobile robot is through a dynamic environment, the algorithm needs to include the main constraint: real-time collision avoidance. This kind of problem has been studied by different researchers suggesting different techniques to solve the problem of how to design a trajectory of a mobile robot avoiding collisions with dynamic obstacles. One of these algorithms is the artificial potential field (APF), proposed by O. Khatib in 1986, where a set of an artificial potential field is generated to attract the mobile robot to the goal and to repel the obstacles. This is one of the best options to obtain the trajectory of a mobile robot in real-time (RT). However, the main disadvantage is the presence of deadlocks. The mobile robot can be trapped in one of the local minima. In 1988, J.F. Canny suggested an alternative solution using harmonic functions satisfying the Laplace partial differential equation. When this article appeared, it was nearly impossible to apply this algorithm to RT applications. Years later a novel technique called proper generalized decomposition (PGD) appeared to solve partial differential equations, including parameters, the main appeal being that the solution is obtained once in life, including all the possible parameters. Our previous work, published in 2018, was the first approach to study the possibility of applying the PGD to designing a path planning alternative to the algorithms that nowadays exist. The target of this work is to improve our first approach while including dynamic obstacles as extra parameters., This research was funded by the GVA/2019/124 grant from Generalitat Valenciana and by the RTI2018-093521-B-C32 grant from the Ministerio de Ciencia, Innovacion y Universidades.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical study on axially loaded ultra-high strength concrete-filled dual steel columns

  • Pons Aliaga, David|||0000-0002-9034-9550
  • Espinós Capilla, Ana|||0000-0001-7335-4676
  • Albero, V|||0000-0001-7193-9232
  • Romero, Manuel L.|||0000-0001-5247-4767
[EN] This paper presents a numerical investigation on the mechanical performance of concrete-filled dual steel tubular columns of circular section subjected to concentric axial load. A three-dimensional numerical model is developed and validated against a series of experimental tests. A good agreement is obtained between the experimental and numerical results, both in the peak load value and in the ascending and descending branches of the load-displacement curves. By means of the numerical model, a parametric study is carried out to investigate the influence of the main parameters that determine the axial capacity of double-tube columns, such as the member slenderness, inner and outer steel tube thicknesses and the concrete grade - of both the outer concrete ring and inner core -, including ultra-high strength concrete. A total number of 163 numerical simulations are carried out, by combining the different parameters. Specific indexes are defined (Strength Index, Concrete-Steel Contribution Ratio, Inner Concrete Contribution Ratio) to help rating the relative mechanical performance of dual steel tubular columns as compared to conventional concrete-filled steel tubular columns, and practical design recommendations are subsequently given., The authors would like to express their sincere gratitude to the "Conselleriad' Educacio, Investigacio, Cultura i Esport" of the Valencian Community (Spain) for the help provided through the project GV/2017/026.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Bishop-Phelps-Bollobas Type Theorem for uniform algegras

  • Cascales, B.
  • Kadets, V.
  • Guirao Sánchez, Antonio José|||0000-0002-1031-3954
This paper is devoted to showing that Asplund operators with range in a uniform Banach algebra have the Bishop¿Phelps¿Bollobas property, i.e., they are approximated by norm attaining Asplund operators at the same time that a point where the approximated operator almost attains its norm is approximated by a point at which the approximating operator attains it. To prove this result we use the weak*-to-norm fragmentability of weak*-compact subsets of the dual of Asplund spaces and we need to observe a Urysohn type result producing peak complex-valued functions in uniform algebras that are small outside a given open set and whose image is inside a Stolz region., This research was partially supported by MEC and FEDER projects MTM2008-05396 and MTM2011-25377. The research of the second author was also partially supported by Generalitat Valenciana (GV/2010/036), and by Universidad Politecnica de Valencia (project PAID-06-09-2829).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Exploring Ventilation Efficiency in Poultry Buildings: The Validation of Computational Fluid Dynamics (CFD) in a Cross-Mechanically Ventilated Broiler Farm

  • Bustamante García, E.|||0000-0002-9062-3062
  • García Diego, Fernando Juan|||0000-0002-7062-245X
  • Calvet, S.|||0000-0001-6639-9892
  • Beltrán Medina, Pedro
  • Hospitaler Pérez, Antonio|||0000-0001-7108-3104
  • Estellés, Fernando
  • Torres Salvador, Antonio Germán
[EN] Broiler production in modern poultry farms commonly uses mechanical ventilation systems. This mechanical ventilation requires an amount of electric energy and a high level of investment in technology. Nevertheless, broiler production is affected by periodic problems of mortality because of thermal stress, thus being crucial to explore the ventilation efficiency. In this article, we analyze a cross-mechanical ventilation system focusing on air velocity distribution. In this way, two methodologies were used to explore indoor environment in livestock buildings: Computational Fluid Dynamics (CFD) simulations and direct measurements for verification and validation (V&V) of CFD. In this study, a validation model using a Generalized Linear Model (GLM) was conducted to compare these methodologies. The results showed that both methodologies were similar in results: the average of air velocities values were 0.60 ± 0.56 m s&#8722;1 for CFD and 0.64 ± 0.54 m s&#8722;1 for direct measurements. In conclusion, the air velocity was not affected by the methodology (CFD or direct measurements), and the CFD simulations were therefore validated to analyze indoor environment of poultry farms and its operations. A better knowledge of the indoor environment may contribute to reduce the demand of electric energy, increasing benefits and improving the thermal comfort of broilers, This work was funded by the project GV04B-511 (Generalitat Valenciana, Spain) and by the Vicerrectorado of Investigacion of the Universitat Politecnica de Valencia (Programa de Apoyo a la Investigacion y Desarrollo Multidisciplinar Project PAID register 2614).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Non-linear Robust Identification of a Greenhouse Model using Multi-objective Evolutionary Algorithms

  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Blasco, Xavier|||0000-0002-9737-2833
  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
  • Ramos Fernández, César|||0000-0003-1806-2114
  • Sanchís Saez, Javier|||0000-0001-9697-2696
[EN] This paper presents a non-linear climatic model (temperature and humidity), based on first-principles equations, of a greenhouse where roses are to be grown using hydroponic methods. Fitting of model parameters (15 in all) is based on measured data collected during summer in the Mediterranean area. A multi-objective optimisation procedure for estimating a set of non-linear models Theta(P) (Pareto optimal), considering simultaneously several optimisation criteria, is presented. A new multi-objective evolutionary algorithm, (sic)-MOGA, has been designed to converge towards ((Theta) over cap (P)* a reduced but well distributed representation of Theta(P) since good convergence and distribution of the Pareto front J(Theta(P)) is achieved by the algorithm. The set can (Theta) over cap (P)* be used as the basis to choose an optimal model that offers a good trade-off among different optimality criteria that have been established. The procedure proposed is applied to the identification and validation of the greenhouse model presented in the paper. (C) 2007 IAgrE. Published by Elsevier Ltd. All rights reserved., Partially supported by MEC (Spanish government) and FEDER funds: projects DPI2005-07835 and DPI2004-8383-C03-02, and Generalitat Valenciana GV06/026. We would like to thank the R&D+i Linguistic Assistance Office at the Universidad Polite´cnica de Valencia for their help in translating this paper.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Fusibles estructurales para evitar la propagación de fallos en las cimbras de edificación

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Moragues, Juan J|||0000-0001-8111-5480
  • Oliver-Cano, Marina
  • Adam, Jose M|||0000-0002-9205-8458
[ES] La construcción de edificios con estructura de hormigón armado se realiza, habitualmente, con la ayuda de puntales metálicos que se encargan de transmitir las cargas de las plantas recién hormigonadas a las inferiores. Los principales problemas que presenta el empleo de puntales son: a) la aparición de cargas superiores a las previstas en los puntales, pudiendo provocar el colapso de toda la cimbra o incluso del edificio, b) la heterogeneidad de las cargas que reciben los puntales de una misma planta cimbrada, y c) la limitada variedad de puntales de que disponen las casas comerciales. Todo ello obliga a que, en la mayor parte de las ocasiones, los puntales empleados en las obras estén claramente sobredimensionados. En este artículo se presenta el fusible estructural para el control de la carga de los puntales (también llamado limitador de carga o LL por sus siglas en inglés), que fue desarrollado en ICITECH a partir de estudios teóricos avanzados, una intensa campaña experimental y la ejecución de una prueba de concepto. El artículo se compone de: 1) una breve recopilación de los trabajos experimentales y de validación computacional llevados a cabo; y 2) el estudio realizado con simulación numérica avanzada para evaluar y cuantificar la posible mitigación del daño y el riesgo de fallo de estructuras de edificios durante su construcción. De los resultados obtenidos se puede afirmar que con el uso de LLs se consigue una mejora: de la seguridad, frente a fallos locales de la cimbra cuyas consecuencias podrían propagarse de forma desproporcionada; de la eficiencia estructural, con una mayor uniformidad en las cargas que reciben los puntales; y de los costes del sistema de apuntalamiento., Los autores quieren expresar su gratitud a todas las entidades por la financiación recibida (FPU13/02466; PRX17/00302; GV/2015/063; APOSTD/2019/101; 101000396; IJC2020- 042642-I), así como a las empresas Encofrado J. Alsina S.A. y Levantina, Ingeniería y Construcción S.L. por su invalorable cooperación.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Big Data Transformation in Agriculture: From Precision Agriculture Towards Smart Farming

  • Rodríguez-Sánchez, María De Los Ángeles
  • Cuenca, L.|||0000-0003-3589-4182
  • Ortiz Bas, Ángel|||0000-0001-5690-0807
[EN] Big data is a concept that has changed the way to analyse data and information in different environments such as industry and recently, in agriculture. It is used to describe a large volume of data (structured or unstructured data), which are difficult to obtain, process or parse using conventional technologies and tools like relational databases or conventional statistics, in a reasonable time for their insight. However, Big Data is applied differently in each area to take advantage of its potential and capabilities. Specially in agriculture that presents more demanding conditions due to its inherent uncertainty, so Big Data methods and models from other environments cannot be used straight away in this area. In this paper, we present a review/update of term Big Data and analyse the evolution and the role of Big Data in agriculture outlined the element of collaboration., All authors acknowledge the partial support of Project 691249, RUC-APS: Enhancing and implementing Knowledge based ICT solutions within high Risk and Uncertain Conditions for Agriculture Production Systems, funded by the EU under its funding scheme H2020-MSCA-RISE-2015; and the project "Development of an integrated maturity model for agility, resilience and gender perspective in supply chains (MoMARGE). Application to the agricultural sector." Ref. GV/2017/025 funded by the Generalitat Valenciana. This first author was supported by the Aid Programme of Research and Development of Universitat Politecnica de Valencia [PAID-01-18].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparative Analysis of Chromatin-Delivered Biomarkers in the Monitoring of Sepsis and Septic Shock: A Pilot Study

  • Beltrán-García, Jesús
  • García-López, Eva M.
  • Carbonell, Nieves
  • Ferreres, José
  • Rodríguez-Gimillo, María
  • Garcés, Concepción
  • Pallardó, Federico V.
  • García-Giménez, José L.
  • Montoya, Ángel
  • Romá-Mateo, Carlos
  • Manclus Ciscar, Juan José|||0000-0001-6720-1534
[EN] Sepsis management remains one of the most important challenges in modern clinical practice. Rapid progression from sepsis to septic shock is practically unpredictable, hence the critical need for sepsis biomarkers that can help clinicians in the management of patients to reduce the proba-bility of a fatal outcome. Circulating nucleoproteins released during the inflammatory response to infection, including neutrophil extracellular traps, nucleosomes, and histones, and nuclear pro-teins like HMGB1, have been proposed as markers of disease progression since they are related to inflammation, oxidative stress, endothelial damage, and impairment of the coagulation response, among other pathological features. The aim of this work was to evaluate the actual potential for decision making/outcome prediction of the most commonly proposed chromatin-related bi-omarkers (i.e., nucleosomes, citrullinated H3, and HMGB1). To do this, we compared different ELISA measuring methods for quantifying plasma nucleoproteins in a cohort of critically ill pa-tients diagnosed with sepsis or septic shock compared to nonseptic patients admitted to the inten-sive care unit (ICU), as well as to healthy subjects. Our results show that all studied biomarkers can be used to monitor sepsis progression, although they vary in their effectiveness to separate sepsis and septic shock patients. Our data suggest that HMGB1/citrullinated H3 determination in plasma is potentially the most promising clinical tool for the monitoring and stratification of septic patients., This activity received funding from the European Institute of Innovation and Technology (EIT). This body of the European Union receives support from the European Union's Horizon 2020 research and innovation program. C.R-M. thanks GVA for starting grant (GV/2018/127) and Spanish Ministry of Science and Innovation for research project (PID2020-119127RA-I00); J.B-G thanks ISCIII, AES2018 for iPFIS fellowship (IFI18/00015) and GVA for APOTI fellowship (APOTIP/2017/012); CG thanks Spanish Ministry of Universities for fellowship FPU18/03969; J.L.G-G and F.V.P thank INCLIVA, GVA and AES2016 and AES2019 (ISCIII) for starting grant (GV/2014/132), project PI16/01036 and PI19/00994 and project DTS17/00132 (co-financed by the ERDF). The project leading to these results has received funding from "la Caixa" Foundation (ID 100010434), under agreement CI18-0009. C.R-M., F.V.P. and A.M. thank Grand Challenges Canada. : We want to particularly acknowledge the patients and the INCLIVA Biobank (PT17/0015/0049; B.000768 ISCIII) integrated in the Valencian Biobanking Network and the Spanish National Biobanks Network for their collaboration.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

ExGUtils: A Python Package for Statistical Analysis With the ex-Gaussian Probability Density

  • Moret-Tatay, Carmen
  • Gamermann, Daniel
  • Navarro Pardo, Esperanza
  • Fernández de Córdoba, Pedro|||0000-0002-0347-7280
[EN] The study of reaction times and their underlying cognitive processes is an important field in Psychology. Reaction times are often modeled through the ex-Gaussian distribution, because it provides a good fit to multiple empirical data. The complexity of this distribution makes the use of computational tools an essential element. Therefore, there is a strong need for efficient and versatile computational tools for the research in this area. In this manuscript we discuss some mathematical details of the ex-Gaussian distribution and apply the ExGUtils package, a set of functions and numerical tools, programmed for python, developed for numerical analysis of data involving the ex-Gaussian probability density. In order to validate the package, we present an extensive analysis of fits obtained with it, discuss advantages and differences between the least squares and maximum likelihood methods and quantitatively evaluate the goodness of the obtained fits (which is usually an overlooked point in most literature in the area). The analysis done allows one to identify outliers in the empirical datasets and criteriously determine if there is a need for data trimming and at which points it should be done., This work has been financed under the Generalitat Valenciana research project GV/2016/188 (Prof. Carmen Moret-Tatay) and the Universidad Catolica de Valencia, San Vicente Martir.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Designing collaborative working laboratory sessions for induction machine fault diagnosis learning

  • J. Antonino-Daviu|||0000-0003-1898-2228
  • Pons Llinares, Joan|||0000-0003-3756-1242
  • Climente Alarcón, Vicente
In this paper, two laboratory sessions, specially designed to instruct students on the operational methodology of different induction motors fault diagnosis techniques, are presented and explained. The sessions are taught within the context of a subject dealing with predictive maintenance of electrical installations and machines. During the laboratory sessions, the students apply the different condition monitoring techniques, using special educational laboratory test benches built to this end. These test benches allow the students to easily capture the necessary current signals in motors with rather different constructive characteristics, operating conditions and faults. Next, the students must process the captured signals by using available software programs. While stationary current signals are analyzed using the Fast Fourier Transform (FFT) conventional diagnosis approach the startup current signals are processed using the Discrete Wavelet Transform (DWT) modern transient-based diagnosis method. The laboratory sessions have been developed from a collaborative perspective, so that the students are encouraged to work in groups in the experimental part with further collective discussion on their diagnostic conclusions, all within an open framework for information sharing., This work was supported by the Conselleria d'Educacio, Formacio i Ocupacio of the Generalitat Valenciana, in the framework of the 'Ayudas para la Realizacion de Proyectos de I+D para Grupos de Investigacion Emergentes', project reference GV/2012/020.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Komlós Theorem for abstract Banach latticesof measurable functions

  • Jiménez Fernández, Eduardo
  • Juan Blanco, María Aránzazu
  • Sánchez Pérez, Enrique Alfonso|||0000-0001-8854-3154
Consider a Banach function space X(mu) of (classes of) locally integrable functions over a sigma-finite measure space (Omega, Sigma, mu) with the weak sigma-Fatou property. Day and Lennard (2010) [9] proved that the theorem of Komlos on convergence of Cesaro sums in L(1) [0, 1] holds also in these spaces; i.e. for every bounded sequence (f(n))(n) in X(mu), there exists a subsequence (f(nk))(k) and a function f is an element of X(mu) such that for any further subsequence (h(j))(j) of (f(nk))(k), the series 1/n Sigma(n)(j=1) h(j) converges mu-a.e. to f. In this paper we generalize this result to a more general class of Banach spaces of classes of measurable functions - spaces L(1) (nu) of integrable functions with respect to a vector measure nu on a delta-ring - and explore to which point the Fatou property and the Komlos property are equivalent. In particular we prove that this always holds for ideals of spaces L(1)(nu) with the weak sigma-Fatou property, and provide an example of a Banach lattice of measurable functions that is Fatou but do not satisfy the Komlos Theorem. (C) 2011 Elsevier Inc., MA. Juan acknowledges the support of the Ministerio de Ciencia e Innovacion (Spain) under the research project MTM2008-04594: Generalitat Valenciana (2009/102) and UPV (PAID-06-08 Ref. 3093).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Longitudinal strain in remote non-infarcted myocardium by tissue tracking CMR: characterization, dynamics, structural and prognostic implications

  • Gavara-Doñate, Josep|||0000-0002-3483-7066
  • Moratal, David|||0000-0002-2825-3646
  • Rodríguez-Palomares, Jose F.
  • Rios-Navarro, Cesar
  • Valente, Filipa
  • Monmeneu, Jose V.
  • Lopez-Lereu, Maria P.
  • Ferreira-González, Ignacio
  • García del Blanco, Bruno
  • Otaegui, Imanol
  • Canoves, Joaquim
  • De Dios, Elena
  • Pérez, Nerea
  • Racugno, Paolo
  • Bonanad, Clara
  • Minana, Gema
[EN] Purpose In ST-segment elevation myocardial infarction (STEMI) patients, longitudinal strain (LS) in remote non-infarcted myocardium (RNM) has not yet been characterized by tissue tracking (TT) cardiovascular magnetic resonance (CMR). In STEMI patients, we aimed to characterize RNM-LS by TT-CMR and to assess both its dynamics and its structural and prognostic implications. Methods We recruited 271 patients with a first STEMI studied with TT-CMR 1 week after infarction. Of these patients, 145 underwent 1-week and 6-month TT-CMR and were used to characterize both the dynamics and the short-term and long-term structural implications of RNM-LS. Based on previously validated data, RNM areas were defined depending on the culprit coronary artery. Results Reduced RNM-LS at 1 week (n = 70, 48%) was associated with larger infarct size and more depressed left ventricular ejection fraction (LVEF) at both the 1-week and 6-month TT-CMR (p value < 0.001). Late normalization of RNM-LS was frequent (28/70, 40%) and independently related to late recovery of LVEF (p value = 0.002). Patients with reduced RNM-LS at 1-week TT-CMR had more major adverse cardiac events (death, heart failure or re-infarction) in both the 271 patients included in the study group (26% vs. 11%, p value = 0.002) and in an external validation cohort made up of 177 STEMI patients (57% vs. 13%, p value < 0.001). Conclusion After STEMI, reduced RNM-LS by TT-CMR is common and is associated with more severe short- and long-term structural damage. There is a beneficial tendency towards recovery of RNM-LS that parallels late recovery of LVEF. More events occur in patients with reduced RNM-LS., This work was supported by the Instituto de Salud Carlos III and co-funded by Fondo Europeo de Desarrollo Regional (FEDER) [Grant Numbers PI17/01836, PIE15/00013, CIBERCV16/11/00486, CIBERCV16/11/00479 and a postgraduate contract FI18/00320 to C. R.-N.] and by the Generalitat Valenciana [Grant Number GV/2018/116]. JG and DM acknowledge financial support from the Agencia Valenciana de la Innovacio, Generalitat Valenciana (Grant INNCAD00/18/026).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Family of Experiments to Compare Two Model-Driven Development Tools vs a Traditional Development Method

  • Panach Navarrete, Jose Ignacio
  • JURISTO, NATALIA
  • Pastor López, Oscar|||0000-0002-1320-8471
[EN] Context: There are many papers which extol the benefits of Model-Driven Development (MDD) compared to traditional developments. However, the adoption of MDD to develop fully functional systems without coding is not frequent. Objective: This paper presents a family of experiments with 7 replications and 56 sample units to compare a traditional method versus MDD, analysing two MDD tools. Method: The factor in the experiment is the method with two treatments (traditional and MDD). We analyse together all replications thanks to two moderator variables in a multilevel hierarchy: Replication (from 1 to 7) and MDD Tool (INTEGRANOVA and WebRatio). Response variables are Functional Suitability, measured in terms of effectiveness in simple and complex problems; Effort, measured as time to develop simple problems; and Satisfaction, measured in terms of perceived ease of use, perceived usefulness and intention to use. Result: Functional Suitability in MDD yields significantly better results both in simple and complex problems, while Effort for simple problems is also significantly better for MDD. Differences for Functional Suitability in complex problems are greater than with simple ones. Considering the MDD tools, INTEGRANOVA yields significantly better Functional Suitability in complex problems. Regarding Satisfaction, replications with WebRatio have a better intention to use than replications with INTEGRANOVA. Conclusions: Even though MDD yields better Functional Suitability and Effort, the subjects' Satisfaction with MDD is not better than with a traditional method., This work was supported by the Spanish Ministry of Science and Innovation project DataMe under Grants TIN2016-80811-P and PGC2018-097265-B-I00, and was co-financed by ERDF and in part by Generalitat Valenciana with GISPRO Project under Grants PROMETEO/2018/176 and GV/2021/072.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The weak topology on q-convex Banach function spaces

  • Agud Albesa, Lucia|||0000-0002-1222-7988
  • Calabuig, J. M.|||0000-0001-8398-8664
  • Sánchez Pérez, Enrique Alfonso|||0000-0001-8854-3154
Let X(mu) be a Banach function space. In this paper we introduce two new geometric notions, q-convexity and weak q-convexity associated to a subset S of the unit ball of the dual of X(mu), 1 = q < 8. We prove that in the general case both notions are not equivalent and we study the relation between them, showing that they can be used for describing the weak topology in these spaces. We define the canonical q-concave weak topology tq on X(mu)a topology generated by q-concave seminormsfor obtaining our main result: A s-order continuous Banach function space X(mu) is q-convex if and only if the following topological inclusions twtqt . hold. As an application, in the last section we prove a suitable Maurey-Rosenthal type factorization theorem for operators from a Banach function space X(mu) into a Banach space that holds under weaker assumptions on the q-convexity requirements for X(mu)., The research of the second named author was partially supported by MEC and FEDER (project MTM2008-04594) and GV/2009/102 (Conselleria de Educacion), and the third one was partially suipported by MEC and FEDER (project MTM2009-14483-C02-02). Both were also supported by Universidad Politecnica de Valencia (project PAID-06-08-3093).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluación de un modelo de predicción del gasto farmacéutico en atención primaria de salud basado en variables demográficas, Evaluation of a predictive model of pharmaceutical expenditure in primary health care based on demographic variables, Avaliação de modelo de predição de despesa farmacêutica em atenção primária à saúde baseado em variáveis demográficas

  • Santamargarita Pérez, Sonia
  • Sancho Mestre, Carla
  • Usó Talamantes, Ruth
  • Vivas-Consuelo, David|||0000-0003-2945-7525
[EN] Problem: In the current context of budget constraints in the health sector management systems that allow allocating spending more efficiently are required. In the case of pharmaceutical expenditure, risk adjustment models are tools that help to improve the efficiency. Objectives: To evaluate the predictive power of a pharmaceutical expenditure adjustment model, Standardized Amount Indicator, using sociodemographic variables: Copayment, international coverage, age and sex. Methods: We included the population registered in Valencia (Spain) between 01/09/2009 and 31/08/2010. Population was standardized and linear regression analysis was performed in order to explain the variability of outpatient pharmaceutical expenditure. Results: The adjustment model evaluated improve the predictive power, reaching a R2 of 34%. Conclusions: This models valid to predict pharmaceutical costs and allocate prospective budgets to health districts and centers., [ES] Problema: en el actual contexto de restricciones presupuestarias en el sector salud, se precisade sistemas de gestión que permitan asignar el gasto de manera más eficiente. En el caso delgasto farmacéutico, los modelos de ajuste de riesgos en salud son herramientas que ayudan amejorar la eficiencia. Objetivos: evaluar la capacidad predictiva de un modelo de ajuste de gastofarmacéutico, Indicador de Importe Estandarizado (iie), según variables sociodemográficas:condición de farmacia, cobertura internacional, edad y sexo. Método: se incluyó la poblaciónempadronada en la Comunidad Valenciana (España) entre el 01/09/2009 y el 31/08/2010. Seestandarizó la población y se realizó un análisis de regresión lineal para explicar la variabilidaddel gasto farmacéutico ambulatorio. Resultados: el sistema de ajuste evaluado supone un avanceen relación con modelos anteriores, alcanzando un mayor poder predictivo (R2 = 34 %). Conclusiones:el iie es válido para predecir el gasto farmacéutico y asignar presupuestos prospectivosa departamentos y centros de salud., [PT] Questão: No atual contexto de restrições orçamentais no sector da saúde são precisos sistemas de gestão que permitan alocar os dispêndios de forma mais eficiente. No caso da despesa farmacêutica os modelos de ajuste de risco em saúde são ferramentas que ajudam no melhoramento da eficiência. Objetivos: avaliar a capacidade preditiva de um modelo de ajuste da despesa farmacêutica, Indicador de Importe Padronizado (iiP), de acordo com variáveis sociodemográficas: condição de farmácia, cobertura internacional, idade e gênero. Métodos: Foi incluída a população registrada em Valencia (Espanha) entre 01/09/2009 e 31/08/2010. A população foi padronizada e realizou-se análise de regressão linear para explicar a variabilidade dos dispêndios farmacêuticos ambulatórios. Resultados: O sistema de ajustamento avaliado supõe uma melhoria em relação aos modelos anteriores, alcançando maior poder preditivo (R2=34%). Conclusões: O iiP é válido para prever os custos farmacêuticos e alocar orçamentos prospectivos aos departamentos e centros de saúde., Artículo de investigación derivado del convenio de colaboración No.143/2011: “Gestión farmacoeconómica para el desarrollo de un modelo econométrico de ajuste del gasto farmacéutico según el riesgo clínico del paciente medido por crg’s”, celebrado entre la Consellería de Sanitat y la Universitat Politècnica de València, con fecha de inicio 28/10/2011 y fecha de finalización 28/10/2012, financiado por la Generalitat Valenciana por un importe de 50.532,27 euros.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Genetic Algorithm in the Optimization of the Acoustic Attenuation System

  • Romero-García, Vicente|||0000-0002-3798-6454
  • Fuster García, Elíes|||0000-0002-0716-8960
  • Sánchez Pérez, Juan Vicente|||0000-0002-4473-8782
  • García-Raffi, L. M.|||0000-0003-3985-8453
  • Blasco, Xavier|||0000-0002-9737-2833
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Sanchís Saez, Javier|||0000-0001-9697-2696
[EN] It is well known that Genetic Algorithms (GA) is an optimization method which can be used in problems where the traditional optimization techniques are difficult to be applied. Sonic Crystals (SC) are periodic structures that present ranges of sound frequencies related with the periodicity of the structure, where the sound propagation is forbidden. This means that in the acoustic spectrum there are ranges of frequencies with high acoustic attenuation. This attenuation can be improved producing vacancies in the structure. In this paper we use a parallel implementation of a GA to optimize those structures, by means of the creation of vacancies in a starting SC, in order to obtain the best acoustic attenuation in a predetermined range of frequencies. The cost function used in GA is based on the Multiple Scattering Theory (MST), which is a self consistent method for calculating acoustic pressure in SCs. As a final result we achieve a quasi ordered structures that presents a high acoustic attenuation in a predetermined range of frequencies, independent of the periodicity of the SC., The authors acknowledge financial support provided by the Spanish MEC (Project No. MAT2006-03097) and by the Generalitat Valenciana (Spain) under Grant No. GV/2007/191. This work also has been partially supported by MEC (Spanish government) and FEDER funds: projects DPI2005-07835, DPI2004- 8383-C03-02 and GVA-026.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

NO2-controlled cargo delivery from gated silica mesoporous nanoparticles

  • Juarez, L. Alberto
  • Costero, Ana M.
  • Parra Alvarez, Margarita
  • Gaviña, Pablo
  • Gil Grau, Salvador
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Sancenón Galarza, Félix|||0000-0002-5205-7135
[EN] Cargo delivery from mesoporous silica nanoparticles loaded with sulforhodamine B and capped with a difluoroboron-dipyrromethene (BODIPY) derivative was triggered by a NO2-induced oxidative process., The authors thank the financial support from the Spanish Government (project MAT2015-64139-C4-R) and the Generalitat Valenciana (project GVA/2014/13).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of the Influence of Tool Wear of Two Drill Bits Manufactured with Different Coating Processes in Drilling Carbon/Glass Fiber Hybrid Composite Bounded with Epoxy Polymer

  • Gutiérrez, S. C.|||0000-0002-9106-9120
  • Meseguer, Maria-Desamparados|||0000-0003-0254-7993
  • Feito-Sánchez, Norberto|||0000-0001-7330-6404
  • Muñoz-Sánchez, Ana
[EN] Fiber Reinforced Polymer (FRP) laminates have been widely used in engineering applications in recent decades. This is mainly due to their superior mechanical properties compared to single-phase materials. High strength-to-weight ratio, high stiffness, and excellent corrosion and fatigue resistance are some of the attractive properties of these materials. In large structures, drilling composite panels is a typical operation to assemble different parts with mechanical fasteners. This operation severely threatens the quality of the holes and, therefore, the joint strength. This study aims to study the wear evolution of two drill bits manufactured with different coatings processes (chemical vapor deposition and physical vapor deposition) and their influence on the quality of the holes. A carbon/glass fiber sandwich structure was selected as the workpiece, and a high-speed machine center was used to drill 1403 holes per tool in the laminates. The wear analysis of the tool was characterized in terms of flank wear and crater wear. For the delamination analysis caused by drilling, two types of delamination are identified (type I and II), and their values were quantified through the equivalent delamination factor (Fed). The results showed that, in general, the process used to apply the coating to the tool influences the wear mode and the delamination damage. The first tool, diamond coated with Chemical Vapor Deposition (CVD), showed more severe crater wear in the flank face and coating loss at the end of the cutting edges. However, with a Physical Vapor Deposition (PVD) coating process, the second tool presented flank wear more controlled but a more severe coating loss and edge rounding near the tip, producing further delamination. Using a supporting plate showed a reduction of delamination type I but not for delamination type II, which is related to edge rounding., This research was funded by Generalitat Valenciana under the project GV/2021/060.