Pasar al contenido principal

MATERIALES POROSOS ACTUADOS ELECTRICAMENTE PARA MEJORAR LA EFICIENCIA ENERGETICA EN DISPOSITIVOS MAGNETICOS Y GENERACION DE HIDROGENO COMO VECTOR DE ENERGIA

MAT2017-86357-C3-1-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD AUTONOMA DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 73
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrodeposited Ni-Based Magnetic Mesoporous Films as Smart Surfaces for Atomic Layer Deposition: An “All-Chemical” Deposition Approach toward 3D Nanoengineered Composite Layers

  • Zhang, Jin
  • Quintana, Alberto
  • Menéndez, Enric
  • Coll, Mariona
  • Pellicer, Eva
  • Sort, Jordi
Mesoporous Ni and Cu-Ni (Cu20Ni80 and Cu45Ni55 in at. %) films, showing a three-dimensional (3D) porous structure and tunable magnetic properties, are prepared by electrodeposition from aqueous surfactant solutions using micelles of P-123 triblock copolymer as structure-directing entities. Pores between 5 and 30 nm and dissimilar space arrangements (continuous interconnected networks, circular pores, corrugated mesophases) are obtained depending on the synthetic conditions. X-ray diffraction studies reveal that the Cu-Ni films have crystallized in the face-centered cubic structure, are textured, and exhibit certain degree of phase separation, particularly those with a higher Cu content. Atomic layer deposition (ALD) is used to conformally coat the mesopores of Cu20Ni80 film with amorphous Al2O3, rendering multiphase "nano-in-meso" metal-ceramic composites without compromising the ferromagnetic response of the metallic scaffold. From a technological viewpoint, these 3D nanoengineered composite films could be appealing for applications like magnetically actuated micro/nanoelectromechanical systems (MEMS/NEMS), voltage-driven magneto-electric devices, capacitors, or as protective coatings with superior strength and tribological performance., Financial support by the European Research Council (SPIN-PORICS 2014-Consolidator Grant, Agreement No 648454), the Spanish Government (Project MAT2017-86357-C3-1-R and associated FEDER) and the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), the Generalitat de Catalunya (2017-SGR-292 and 2017-SGR-1519) and the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no 665919 is acknowledged. E.P. and M. C. are grateful to MINECO for the “Ramón y Cajal” contract (RYC-2012-10839 and RYC-2013-12448)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reversible and magnetically unassisted voltage-driven switching of magnetization in FeRh/PMN-PT

  • Fina, Ignasi
  • Quintana, Alberto
  • Martí, Xavier
  • Sánchez Barrera, Florencio
  • Foerster, Michael
  • Aballe, Lucía
  • Sort, Jordi
  • Fontcuberta, Josep
Reversible control of magnetization by electric fields without assistance from a subsidiary magnetic field or electric current could help reduce the power consumption in spintronic devices. When increasing temperature above room temperature, FeRh displays an uncommon antiferromagnetic to ferromagnetic phase transition linked to a unit cell volume expansion. Thus, using the strain exerted by an adjacent piezoelectric layer, the relative amount of antiferromagnetic and ferromagnetic regions can be tuned by an electric field applied to the piezoelectric material. Indeed, large variations in the saturation magnetization have been observed when straining FeRh films grown on suitable piezoelectric substrates. In view of its applications, the variations in the remanent magnetization rather than those of the saturation magnetization are the most relevant. Here, we show that in the absence of any bias external magnetic field, permanent and reversible magnetization changes as high as 34% can be induced by an electric field, which remain after this has been zeroed. Bulk and local magnetoelectric characterization reveals that the fundamental reason for the large magnetoelectric response observed at remanence is the expansion (rather than the nucleation) of ferromagnetic nanoregions., Financial support by the Spanish Government [Projects MAT2014-56063-C2-1-R, MAT2015-73839-JIN, MAT2014-51778-C2-1-R, MAT2015-64110-C2-2-R and MAT2017-86357-C3-1-R, and associated FEDER], the Generalitat de Catalunya (2017-SGR-1377, 2017-SGR-292), and the European Research Council (SPIN-PORICS 2014-Consolidator Grant, Agreement nº 648454) is acknowledged. We also acknowledge support from EU ERC Advanced Grant No. 268066, from the Ministry of Education of the Czech Republic Grant No. LM2011026, from the Grant Agency of the Czech Republic Grant no. 14-37427. ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV- 2015-0496). I.F. acknowledges Ramon y Cajal contract RYC-2017-22531., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Coercivity modulation in Fe–Cu pseudo-ordered porous thin films controlled by an applied voltage: A sustainable, energy-efficient approach to magnetoelectrically driven materials

  • Dislaki, Evangelia
  • Robbennolt, Shauna
  • Campoy Quiles, Mariano
  • Nogués, Josep
  • Pellicer, Eva
  • Sort, Jordi
Fe–Cu films with pseudo‐ordered, hierarchical porosity are prepared by a simple, two‐step procedure that combines colloidal templating (using sub‐micrometer‐sized polystyrene spheres) with electrodeposition. The porosity degree of these films, estimated by ellipsometry measurements, is as high as 65%. The resulting magnetic properties can be controlled at room temperature using an applied electric field generated through an electric double layer in an anhydrous electrolyte. This material shows a remarkable 25% voltage‐driven coercivity reduction upon application of negative voltages, with excellent reversibility when a positive voltage is applied, and a short recovery time. The pronounced reduction of coercivity is mainly ascribed to electrostatic charge accumulation at the surface of the porous alloy, which occurs over a large fraction of the electrodeposited material due to its high surface‐area‐to‐volume ratio. The emergence of a hierarchical porosity is found to be crucial because it promotes the infiltration of the electrolyte into the structure of the film. The observed effects make this material a promising candidate to boost energy efficiency in magnetoelectrically actuated devices., This work was supported by the SELECTA (No. 642642) H2020‐MSCA‐ITN‐2014 project. Partial financial support by the Spanish Ministry of Economy, Industry and Competitiveness (MINECO) (Project Nos. MAT2017‐86357‐C3‐1‐R, MAT2015‐70850‐P and associated FEDER), the Generalitat de Catalunya (2017‐SGR‐292), and the European Research Council (SPIN‐PORICS and FOREMAT, with Agreement Nos. 648454 and 648901, respectively) is acknowledged. E.P. is grateful to MINECO for the “Ramon y Cajal” contract (RYC‐2012‐10839). The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa programme of MINECO, grant no. SEV‐2013‐0295., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetically amplified photothermal therapies and multimodal imaging with magneto-plasmonic nanodomes

  • Li, Zhi
  • Aranda-Ramos, Antonio
  • Güell-Grau, Pau
  • Tajada Herráiz, José Luis
  • Pou-Macayo, Laia
  • Lope-Piedrafita, Silvia
  • Pi, Francesc
  • Roca, Alejandro G.
  • Baró, María Dolors
  • Sort, Jordi
  • Nogués, Carme
  • Sepúlveda, Borja
Nanotherapies require new ways for controlling and improving the delivery of the therapeutic agents to the site of action to maximize their efficacy and minimize the side effects. This control is particularly relevant in photothermal treatments to reduce the required light intensity and amount of injected nanoparticles, and to minimize necrotic cell deaths. Here we present a novel concept for multifunctional nanobiomedical agents: magneto-plasmonic (MP) nanodomes for magnetically guided and amplified photothermal therapies and as contrast agents for multimodal imaging. The MP nanodomes are composed of a Fe/Au bilayer semi-shell deposited on a 100 nm diameter fluorescent polystyrene nanosphere, which gather a unique combination of straightforward functionalization, high colloidal stability, very strong ferromagnetic behavior and intense optical absorption efficiency in the near infrared. We show that the photothermal conversion efficiency of the Fe/Au nanodomes with high Fe ratios is substantially larger than pure plasmonic Au nanodomes and the state-of-art plasmonic nanoheaters, i.e. Au nanorods and nanoshells, by merging strong optical absorption, minimized scattering and low optical anisotropy. Remarkably, the effective magnetophoretic concentration of the Fe/Au nanodomes at the illumination region enables large local increase of the optically induced temperature rise. The Fe semishell also provides very intense T2 contrast in nuclear magnetic resonance, which is at least 15-fold larger per particle than commercial iron oxide contrast agents. Moreover, the fluorescent polystyrene nanosphere and the Au semishell integrate valuable fluorescent and X-ray contrasts, respectively, which we have used to assess the nanodomes internalization by cancer cells. The MP nanodomes are nontoxic to cells even in the case of magnetophoretic local enrichment with initially high particle concentration (100 μg/mL). Remarkably, we demonstrate amplified local photothermal treatments by the magnetic enrichment of the nanodomes at the illumination region, which enables reaching nearly 100% reduction of cell viability with low particle concentration (10 μg/mL) and mild NIR laser intensity (5 W/cm2). These results highlight the high potential of MP nanodomes for magnetically guided and amplified photothermal therapies., This work is supported by Spanish Ministry of Economy, Industry and Competitiveness (MINECO) and European Regional Development Fund (FEDER) (Projects number: MAT2013-48628-R, MAT2016-77391-R, MAT2017-86357-C3-1-R and MAT2017-86357-C3-3-R). Generalitat de Catalunya (2017-SGR-292) is acknowledged. ICN2 is funded by the Centres de Recerca de Catalunya (CERCA) Programme/Generalitat de Catalunya. ICN2 also acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295). Zhi Li acknowledges the Chinese Scholarship Council Program (201506950059) for financial support. Jordi Sort acknowledges the financial support by the European Research Council (SPIN-PORICS 2014-Consolidator Grant, Agreement N° 648454)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tunable magnetism in nanoporous CuNi alloys by reversible voltage‐driven element‐selective redox processes

  • Quintana, Alberto
  • Menéndez, Enric
  • Isarain-Chávez, Eloy
  • Fornell, Jordina
  • Solsona, Pau
  • Fauth, François
  • Baró, María Dolors
  • Nogués, Josep
  • Pellicer, Eva
  • Sort, Jordi
Voltage-driven manipulation of magnetism in electrodeposited 200 nm thick nanoporous single-phase solid solution Cu20 Ni80 (at%) alloy films (with sub 10 nm pore size) is accomplished by controlled reduction-oxidation (i.e., redox) processes in a protic solvent, namely 1 m NaOH aqueous solution. Owing to the selectivity of the electrochemical processes, the oxidation of the CuNi film mainly occurs on the Cu counterpart of the solid solution, resulting in a Ni-enriched alloy. As a consequence, the magnetic moment at saturation significantly increases (up to 33% enhancement with respect to the as-prepared sample), while only slight changes in coercivity are observed. Conversely, the reduction process brings Cu back to its metallic state and, remarkably, it becomes alloyed to Ni again. The reported phenomenon is fully reversible, thus allowing for the precise adjustment of the magnetic properties of this system through the sign and amplitude of the applied voltage., The financial support by the European Research Council (SPINPORICS 2014-Consolidator Grant, Agreement No. 648454), the Spanish Government (Projects MAT2017-86357-C3-1-R, MAT2014-57960-C3-1-R and associated FEDER), the Generalitat de Catalunya (2017-SGR-292), and the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 665919 is acknowledged. E.P. is grateful to MINECO for the “Ramón y Cajal” contract (RYC-2012-10839). The authors are also indebted to the National Council on Science and Technology in Mexico (CONACYT) for the postdoctoral grant (274347) given to E.I.-C. J.F. acknowledges the Juan de la Cierva Fellowship from MINECO (Grant no. IJCI-2015-27030). The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. ICN2 also acknowledges the support from the Severo Ochoa Program (MINECO, Grant no. SEV-2013-0295)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Voltage-controlled ON-OFF ferromagnetism at room temperature in a single metal oxide film

  • Quintana, Alberto
  • Menéndez, Enric
  • Liedke, Maciej O.
  • Butterling, Maik
  • Wagner, Andreas
  • Sireus, Veronica
  • Torruella, Pau
  • Estradé, Sònia
  • Peiró, Francesca
  • Dendooven, Jolien
  • Detavernier, Christophe
  • Murray, Peyton D.
  • Gilbert, Dustin A.
  • Liu, Kai
  • Pellicer, Eva
  • Nogués, Josep
  • Sort, Jordi
Electric-field-controlled magnetism can boost energy efficiency in widespread applications. However, technologically, this effect is facing important challenges: mechanical failure in strain-mediated piezoelectric/magnetostrictive devices, dearth of room-temperature multiferroics, or stringent thickness limitations in electrically charged metallic films. Voltage-driven ionic motion (magneto-ionics) circumvents most of these drawbacks while exhibiting interesting magnetoelectric phenomena. Nevertheless, magneto-ionics typically requires heat treatments and multicomponent heterostructures. Here we report on the electrolyte-gated and defect-mediated O and Co transport in a Co3O4 single layer which allows for room-temperature voltage-controlled ON-OFF ferromagnetism (magnetic switch) via internal reduction/oxidation processes. Negative voltages partially reduce Co3O4 to Co (ferromagnetism: ON), resulting in graded films including Co- and O-rich areas. Positive bias oxidizes Co back to Co3O4 (paramagnetism: OFF). This electric-field-induced atomic-scale reconfiguration process is compositionally, structurally, and magnetically reversible and self-sustained, since no oxygen source other than the Co3O4 itself is required. This process could lead to electric-field-controlled device concepts for spintronics., Financial support by the European Research Council (SPINPORICS 2014-Consolidator Grant, Agreement No. 648454), the Spanish Government (Projects MAT2017-86357-C3-1-R and associated FEDER), the Generalitat de Catalunya (2017-SGR-292) and the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 665919 is acknowledged. E.P. is grateful to MINECO for the “Ramon y Cajal” contract (RYC-2012-10839). The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. ICN2 also acknowledges the support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295). Work at UCD is supported by the US NSF (DMR1610060 and ECCS-1611424)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Flexoelectric fracture-ratchet effect in ferroelectrics

  • Cordero-Edwards, Kumara
  • Kianirad, Hoda
  • Canalias, Carlota
  • Sort, Jordi
  • Catalán, Gustau
The propagation front of a crack generates large strain gradients and it is therefore a strong source of gradient-induced polarization (flexoelectricity). Herein, we demonstrate that, in piezoelectric materials, a consequence of flexoelectricity is that crack propagation is helped or hindered depending on whether it is parallel or antiparallel to the piezoelectric polar axis. The discovery of crack propagation asymmetry proves that fracture physics cannot be assumed to be symmetric in polar materials, and indicates that flexoelectricity should be incorporated in any realistic model., K. C.-E. and G. C. acknowledge ERC Starting Grant No. 308023, MINECO Grant No. MAT2016-77100-C2-1-P from Spain and AGAUR Grant No. 2017-SGR-00579 from Catalonia. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706), and also funded by the CERCA Programme / Generalitat de Catalunya. H. K. and C. C. acknowledge the Swedish Research Council for generous support. The work of J. S. has been partially funded by the 2017-SGR-292 project from the Generalitat de Catalunya and the MAT2017-86357-C3-1-R project from the Spanish Ministerio de Economía y Competitividad (MINECO), cofinanced by the ‘Fondo Europeo de Desarrollo Regional (FEDER)’., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Local manipulation of metamagnetism by strain nanopatterning

  • Foerster, Michael
  • Menéndez, Enric
  • Coy, Emerson
  • Quintana, Alberto
  • Gómez Olivella, Carles
  • Esqué de los Ojos, Daniel
  • Vallcorba, Oriol
  • Frontera, Carlos
  • Aballe, Lucía
  • Nogués, Josep
  • Sort, Jordi
  • Fina, Ignasi
Among metamagnetic materials, FeRh alloys are technologically appealing due to their uncommon antiferromagnetic-to-ferromagnetic metamagnetic transition which occurs at a temperature T* just above room temperature. Here, a controlled increase of T* (DT* B 20 8C) is induced in pre-selected regions of FeRh films via mechanical strain nanopatterning. Compressive stresses generated at the vicinity of predefined nanoindentation imprints cause a local reduction of the FeRh crystallographic unit cell parameter, which leads to an increase of T* in these confined micro-/nanometric areas. This enhances the stability of the antiferromagnetic phase in these localized regions. Remarkably, generation of periodic arrays of nanopatterned features also allows modifying the overall magnetic and electric transport properties across large areas of the FeRh films. This approach is highly appealing for the design of new memory architectures or other AFM-spintronic devices., Dr Patxi Lopez-Barbera is acknowledged for his assistance with the MOKE experiments. Vicente Garcia-Juez from Real Casa de la Moneda – Fabrica Nacional de Moneda y Timbre is acknowledged for his scientific advice. Dr Florencio Sa´nchez is acknowledged for the growth of the samples. Dr Bernat Bozzo is acknowledged for the electric transport characterization. ALBA synchrotron is acknowledged for the provision of beamtime at the MSPD (proposal number 2017092412) and CIRCE (proposal numbers 2017092462 and 2018022818) beamlines. Financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘‘Severo Ochoa’’ Programme for Centres of Excellence in R&D (SEV-2015-0496 and SEV-2017-0706) and the MAT2017-85232-R, RTI2018-095303-B-C53. MAT2014-56063-C2-1-R, MAT2017-86357-C3-1-R (and associated FEDER) and MAT2015-73839-JIN projects, the Generalitat de Catalunya (2014 SGR 734 and 2017 SGR 292), AGAUR (2018 LLAV 00032 and 2019 LLAV 00050) and the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 665919 is acknowledged. This work was supported by the European Research Council under the SPIN-PORICS 2014-Consolidator Grant, Agreement No. 648454 and the MAGICSWITCH 2019-Proof of Concept Grant, Agreement No. 875018. ICN2 is funded by the CERCA Programme/Generalitat de Catalunya. I. F. acknowledges his RyC contract RYC-2017-22531. E. C. acknowledges the partial financial support from the National Science Centre of Poland (NCN) by the PRELUDIUM project UMO-2015/17/N/ST5/01988 and the SONATA Project No. UMO-2016/23/D/ST3/02121., We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Boosting Room-Temperature Magneto-Ionics in a Non-Magnetic Oxide Semiconductor

  • Rojas, Julius de
  • Quintana, Alberto
  • Lopeandia Fernández, Aitor
  • Salguero, Joaquín
  • Costa Krämer, José Luis
  • Abad Muñoz, Llibertat
  • Liedke, Maciej O.
  • Butterling, Maik
  • Wagner, Andreas
  • Henderick, Lowie
  • Dendooven, Jolien
  • Detavernier, Christophe
  • Sort, Jordi
  • Menéndez, Enric
Voltage control of magnetism through electric field-induced oxygen motion (magneto-ionics) could represent a significant breakthrough in the pursuit for new strategies to enhance energy efficiency in magnetically actuated devices. Boosting the induced changes in magnetization, magneto-ionic rates and cyclability continue to be key challenges to turn magneto-ionics into real applications. Here, it is demonstrated that room-temperature magneto-ionic effects in electrolyte-gated paramagnetic CoO films can be largely increased both in terms of generated magnetization (6 times larger) and speed (35 times faster) if the electric field is applied using an electrochemical capacitor configuration (utilizing an underlying conducting buffer layer) instead of placing the electric contacts at the side of the semiconductor (electric-double-layer transistor-like configuration). This is due to the greater uniformity and strength of the electric field in the capacitor design. These results are appealing to widen the use of ion migration in technological applications such as neuromorphic computing or iontronics in general., Financial support by the European Research Council (SPIN-PORICS 2014-Consolidator Grant, Agreement N° 648454), the Spanish Government (MAT2017-86357-C3-1-R), the Generalitat de Catalunya (2017-SGR-292 and 2018-LLAV-00032), and the European Regional Development Fund (MAT2017-86357-C3-1-R and 2018-LLAV-00032) is acknowledged. This work was partially supported by the Impulse-und Net-working fund of the Helmholtz Association (FKZ VH-VI-442 Memriox), and the Helmholtz Energy Materials Characterization Platform (03ET7015).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Voltage-driven motion of nitrogen ions: a new paradigm for magneto-ionics

  • Rojas, Julius de
  • Quintana, Alberto
  • Lopeandía, Aitor
  • Salguero, Joaquín
  • Muñiz, Beatriz
  • Ibrahim, Fatima
  • Chshiev, Mairbek
  • Nicolenco, Aliona
  • Liedke, Maciej O.
  • Butterling, Maik
  • Wagner, Andreas
  • Sireus, Veronica
  • Abad Muñoz, Llibertat
  • Jensen, Christopher J.
  • Liu, Kai
  • Nogués, Josep
  • Costa Krämer, José Luis
  • Menéndez, Enric
  • Sort, Jordi
Magneto-ionics, understood as voltage-driven ion transport in magnetic materials, has largely relied on controlled migration of oxygen ions. Here, we demonstrate room-temperature voltage-driven nitrogen transport (i.e., nitrogen magneto-ionics) by electrolyte-gating of a CoN film. Nitrogen magneto-ionics in CoN is compared to oxygen magneto-ionics in Co3O4. Both materials are nanocrystalline (face-centered cubic structure) and show reversible voltage-driven ON-OFF ferromagnetism. In contrast to oxygen, nitrogen transport occurs uniformly creating a plane-wave-like migration front, without assistance of diffusion channels. Remarkably, nitrogen magneto-ionics requires lower threshold voltages and exhibits enhanced rates and cyclability. This is due to the lower activation energy for ion diffusion and the lower electronegativity of nitrogen compared to oxygen. These results may open new avenues in applications such as brain-inspired computing or iontronics in general., Financial support by the European Research Council (2014-Consolidator Grant Agreement No. 648454 and 2019-Proof of Concept Grant Agreement N° 875018), the Spanish Government (MAT2017-86357-C3-1-R), the Generalitat de Catalunya (2017-SGR-292 and 2018-LLAV-00032), the French ANR (ANR-18-CE24-0017 Project “FEOrgSpin”) and FEDER (MAT2017-86357-C3-1-R and 2018-LLAV-00032) is acknowledged. ICN2 is funded by the CERCA program/Generalitat de Catalunya and supported by the Severo Ochoa Centres of Excellence program (Spanish Research Agency, grant no. SEV-2017-0706). Work at GU has been supported by SMART (2018-NE-2861), one of seven centers of nCORE, a Semiconductor Research Corporation program sponsored by NIST, and NSF (DMR−1905468, DMR−1828420). The PALS measurements were carried out at ELBE at the Helmholtz-Zentrum Dresden-Rossendorf e. V., a member of the Helmholtz Association. We would like to thank A.G. Attallah and E. Hirschmann for assistance during PALS., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strain gradient mediated magnetoelectricity in Fe-Ga/P(VDF-TrFE) multiferroic bilayers integrated on silicon

  • Nicolenco, Aliona
  • Gómez Rodríguez, Andrés
  • Chen, Xiang-Zhong
  • Menéndez, Enric
  • Fornell, Jordina
  • Pané, Salvador
  • Pellicer, Eva
  • Sort, Jordi
The primary advantage of magnetoelectric heterostructures exhibiting direct magnetoelectric effect is the possibility to induce and modulate the electrical response of the ferroelectric phase directly with an external magnetic field (i.e., wirelessly, without applying electric field). Nevertheless, the magnetoelectric coupling in such heterostructures is commonly limited by substrate clamping which hinders effective strain propagation. In this work, 1 μm thick ferromagnetic Fe-Ga layers were electrodeposited onto rigid Si/Cu substrates and subsequently coated with ferroelectric P(VDF-TrFE). Under magnetic field, the (110) textured Fe-Ga alloy is compressed along the z-direction by 0.033%, as demonstrated by X-ray diffraction. The experimental results suggest that while the bottom of the Fe-Ga layer is clamped, its air side exhibits a pronounced tetragonal deformation thanks to the residual nanoporosity existing between the columnar grains, that is, a strain gradient develops across the thickness of the Fe-Ga film. This strain gradient in Fe-Ga induces a change in the piezoresponse of the adjacent ferroelectric P(VDF-TrFE) layer. These results pave the way to the design of high-performance microelectromechanical systems (MEMS) with magnetoelectric response integrated on rigid substrates., This work was supported by the Spanish Government (MAT2017-86357-C3-1-R and associated FEDER), the Generalitat de Catalunya (2017-SGR-292), the European Research Council (ERC) under the SPIN-PORICS 2014-Consolidator Grant (Agreement № 648454) and the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement nº 665919. Authors also acknowledge networking support by COST Action MP1407-STSM grant COST-STSM-MP1407-43917. J.F. acknowledges the “Juan de la Cierva” (IJCI-2015-27030) contract by the Spanish Government. S.P. acknowledges support from the ERC-2017-CoG HINBOTS Grant No. 771565., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magneto-ionic suppression of magnetic vortices

  • Chen, Yu
  • Nicolenco, Aliona
  • Molet, Pau
  • Mihi, Agustín
  • Pellicer, Eva
  • Sort, Jordi
Magneto-ionics refers to the non-volatile control of the magnetic properties of materials by voltage-driven ion migration. This phenomenon constitutes one of the most important magnetoelectric mechanisms and, so far, it has been employed to modify the magnetic easy axis of thin films, their coercivity or their net magnetization. Herein, a novel magneto-ionic effect is demonstrated: the transition from vortex to coherent rotation states, caused by voltage-induced ion motion, in arrays of patterned nanopillars. Electrolyte-gated Co/GdOx bilayered nanopillars are chosen as a model system. Electron microscopy observations reveal that, upon voltage application, oxygen ions diffuse from GdOx to Co, resulting in the development of paramagnetic oxide phases (CoOx) along sporadic diffusion channels. This breaks up the initial magnetization configuration of the ferromagnetic pillars (i.e., vortex states) and leads to the formation of small ferromagnetic nanoclusters, embedded in the CoOx matrix, which behave as single-domain nanoparticles. As a result, a decrease of the net magnetic moment is observed, together with a drastic change in the shape of the hysteresis loop. Micromagnetic simulations are used to interpret these findings. These results pave the way towards a new potential application of magnetoelectricity: the magneto-ionic control of magnetic vortex states., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement Nº 892661– MAGNUS. Financial support by the European Research Council (MAGIC-SWITCH 2019-Proof of Concept Grant (Nº 875018)), the Spanish Ministerio de Ciencia e Innovación through grants, MAT2017-86357-C3-1-R, PID2019-106860GB-I00 and The Spanish Severo Ochoa Centre of Excellence program FUNFUTURE (CEX2019-000917-S as well as associated FEDER. The Generalitat de Catalunya (2017-SGR-292 and 2018-LLAV-00032) is also acknowledged. P.M acknowledges financial support from an FPI contract (2017) of the MICINN (Spain) cofounded by the ESF and the UAB., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Critical Role of Electrical Resistivity in Magnetoionics

  • Rojas, Julius de
  • Salguero, Joaquín
  • Quintana, Alberto
  • Lopeandía, Aitor
  • Liedke, Maciej O.
  • Butterling, Maik
  • Attallah, Ahmed G.
  • Hirschmann, Eric
  • Wagner, Andreas
  • Abad Muñoz, Llibertat
  • Costa Krämer, José Luis
  • Sort, Jordi
  • Menéndez, Enric
The utility of electrical resistivity as an indicator of magnetoionic performance in stoichiometrically and structurally similar thin-film systems is demonstrated. A series of highly nanocrystalline cobalt nitride (Co-N) thin films (85 nm thick) with a broad range of electrical properties exhibit markedly different magnetoionic behaviors. Semiconducting, near stoichiometric CoN films show the best performance, better than their metallic and insulating counterparts. Resistivity reflects the interplay between atomic bonding, carrier localization, and structural defects, and in turn determines the strength and distribution of applied electric fields inside the actuated films. This fact, generally overlooked, reveals that resistivity can be used to quickly evaluate the potential of a system to exhibit optimal magnetoionic effects, while also opening interesting challenges., Financial support by the European Research Council (SPIN-PORICS 2014-Consolidator Grant, Agreement No. 648454, and the MAGIC-SWITCH 2019-Proof of Concept Grant, Agreement No. 875018), the Spanish Government (MAT2017-86357-C3-1-R and PID2020- 116844RB-C21), the Generalitat de Catalunya (2017- SGR-292 and 2018-LLAV-00032) and the European Regional Development Fund (MAT2017-86357-C3-1-R and 2018-LLAV-00032) is acknowledged. This work was partially supported by the Impulse-und Net-working fund of the Helmholtz Association (FKZ VH-VI-442 Memriox), and the Helmholtz Energy Materials Characterization Platform (03ET7015). The PALS measurements were carried out at ELBE at the Helmholtz-Zentrum DresdenRossendorf e. V., a member of the Helmholtz Association. L.A. thanks MINECO for a Ramón y Cajal Contract (RYC-2013-12640). J.S. thanks the Spanish Fábrica Nacional de Moneda y Timbre for fruitful discussions. E.M. acknowledges support as a Serra Húnter Fellow. We acknowledge service from MiNa Laboratory at IMNCSIC.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magneto-Ionics in Single-Layer Transition Metal Nitrides

  • Rojas, Julius de
  • Salguero, Joaquín
  • Ibrahim, Fatima
  • Chshiev, Mairbek
  • Quintana, Alberto
  • Lopeandía, Aitor
  • Liedke, Maciej O.
  • Butterling, Maik
  • Hirschmann, Eric
  • Wagner, Andreas
  • Abad Muñoz, Llibertat
  • Costa Krämer, José Luis
  • Menéndez, Enric
  • Sort, Jordi
Magneto-ionics allows for tunable control of magnetism by voltage-driven transport of ions, traditionally oxygen or lithium and, more recently, hydrogen, fluorine, or nitrogen. Here, magneto-ionic effects in single-layer iron nitride films are demonstrated, and their performance is evaluated at room temperature and compared with previously studied cobalt nitrides. Iron nitrides require increased activation energy and, under high bias, exhibit more modest rates of magneto-ionic motion than cobalt nitrides. Ab initio calculations reveal that, based on the atomic bonding strength, the critical field required to induce nitrogen-ion motion is higher in iron nitrides (≈6.6 V nm-1) than in cobalt nitrides (≈5.3 V nm-1). Nonetheless, under large bias (i.e., well above the magneto-ionic onset and, thus, when magneto-ionics is fully activated), iron nitride films exhibit enhanced coercivity and larger generated saturation magnetization, surpassing many of the features of cobalt nitrides. The microstructural effects responsible for these enhanced magneto-ionic effects are discussed. These results open up the potential integration of magneto-ionics in existing nitride semiconductor materials in view of advanced memory system architectures., Financial support by the European Research Council (SPINPORICS 2014-Consolidator Grant, Agreement No. 648454, and the MAGIC-SWITCH 2019-Proof of Concept Grant, Agreement No. 875018), the Spanish Government (MAT2017-86357-C3-1-R), the Generalitat de Catalunya (2017-SGR-292 and 2018-LLAV-00032), the European Regional Development Fund (MAT2017-86357-C3-1-R and 2018-LLAV-00032), and the French ANR (ANR-18-CE24- 0017 “FEOrgSpin” and ELECSPIN ANR-16-CE24-0018 “ELECSPIN”) is acknowledged. This work was partially supported by the Impulse- und Net-working fund of the Helmholtz Association (FKZ VH-VI-442 Memriox) and the Helmholtz Energy Materials Characterization Platform (03ET7015). The PALS measurements were carried out at ELBE at the Helmholtz-Zentrum Dresden-Rossendorf e. V., a member of the Helmholtz Association. We thank the facility staff for assistance. L.A. thanks MINECO for a Ramón y Cajal Contract (RYC-2013-12640).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Voltage control of magnetism with magneto-ionic approaches: Beyond voltage-driven oxygen ion migration

  • Rojas, Julius de
  • Quintana García, Aleix
  • Rius, Gemma
  • Stefani, Christina
  • Domingo, Neus
  • Costa Krämer, José Luis
  • Menéndez, Enric
  • Sort, Jordi
Magneto-ionics is an emerging field in materials science where voltage is used as an energy-efficient means to tune magnetic properties, such as magnetization, coercive field, or exchange bias, by voltage-driven ion transport. We first discuss the emergence of magneto-ionics in the last decade, its core aspects, and key avenues of research. We also highlight recent progress in materials and approaches made during the past few years. We then focus on the "structural-ion"approach as developed in our research group in which the mobile ions are already present in the target material and discuss its potential advantages and challenges. Particular emphasis is given to the energetic and structural benefits of using nitrogen as the mobile ion, as well as on the unique manner in which ionic motion occurs in CoN and FeN systems. Extensions into patterned systems and textures to generate imprinted magnetic structures are also presented. Finally, we comment on the prospects and future directions of magneto-ionics and its potential for practical realizations in emerging fields, such as neuromorphic computing, magnetic random-access memory, or micro- and nano-electromechanical systems., Financial support by the European Research Council (SPIN-PORICS 2014-Consolidator Grant Agreement No. 648454, and the MAGIC-SWITCH 2019-Proof of Concept Grant, Agreement No. 875018), the Spanish Government (Nos. MAT2017-86357-C3-1-R, PDC2021-121276-C31, and PID2020-116844RB-C21), the Generalitat de Catalunya (2017-SGR-292 and 2018-LLAV-00032), and the European Regional Development Fund (Nos. MAT2017-86357-C3-1-R and 2018-LLAV-00032) were acknowledged. E.M. acknowledges support as a Serra Húnter Fellow. G.R. acknowledges support from Ayudas Ramon y Cajal No. RYC-2016-21412., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dynamic electric-field-induced magnetic effects in cobalt oxide thin films: Towards magneto-ionic synapses

  • Martins, Sofia
  • Rojas, Julius de
  • Tan, Zhengwei
  • Cialone, Matteo
  • Lopeandía, Aitor
  • Herrero Martín, Javier
  • Costa Krämer, José Luis
  • Menéndez, Enric
  • Sort, Jordi
Voltage control of magnetism via electric-field-driven ion migration (magneto-ionics) has generated intense interest due to its potential to greatly reduce heat dissipation in a wide range of information technology devices, such as magnetic memories, spintronic systems or artificial neural networks. Among other effects, oxygen ion migration in transition-metal-oxide thin films can lead to the generation or full suppression of controlled amounts of ferromagnetism ('ON-OFF' magnetic transitions) in a non-volatile and fully reversible manner. However, oxygen magneto-ionic rates at room temperature are generally considered too slow for industrial applications. Here, we demonstrate that sub-second ON-OFF transitions in electrolyte-gated paramagnetic cobalt oxide films can be achieved by drastically reducing the film thickness from >200 nm down to 5 nm. Remarkably, cumulative magneto-ionic effects can be generated by applying voltage pulses at frequencies as high as 100 Hz. Neuromorphic-like dynamic effects occur at these frequencies, including potentiation (cumulative magnetization increase), depression (i.e., partial recovery of magnetization with time), threshold activation, and spike time-dependent magnetic plasticity (learning and forgetting capabilities), mimicking many of the biological synapse functions. The systems under investigation show features that could be useful for the design of artificial neural networks whose magnetic properties would be governed with voltage., This work has received funding from the European Unions Horizon 2020 Research and Innovation Programme BeMAGIC under the Marie Sklodowska-Curie grant agreement No 861145. Financial support by the European Research Council (SPIN-PORICS 2014-Consolidator Grant, Agreement No. 648454, and MAGIC-SWITCH 2019-Proof of Concept Grant, Agreement No. 875018), the Spanish Government (MAT2017-86357-C3-1-R, PID2020-116844RB-C21), the Generalitat de Catalunya (2017-SGR-292 and 2018-LLAV-00032) and the European Regional Development Fund (MAT2017-86357-C3-1-R and 2018-LLAV-00032) is acknowledged. The authors would like to thank João Lucas (jgbl89@gmail.com) for the illustrations. XAS experiments were performed at BL29-BOREAS beamline at ALBA Synchrotron with the collaboration of ALBA staff. E. M. is a Serra Húnter Fellow., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Voltage-driven strain-mediated modulation of exchange bias in Ir<inf>20</inf>Mn<inf>80</inf>/Fe<inf>80</inf>Ga<inf>20</inf>/Ta/ «011»-oriented PMN-32PT heterostructures

  • Demirci, Erdem
  • Rojas, Julius de
  • Quintana, Alberto
  • Fina, Ignasi
  • Menéndez, Enric
  • Sort, Jordi
Manipulation of exchange bias with electric field is appealing to boost energy efficiency in spintronic devices. Here, this effect is shown at room temperature in Ir20Mn80/Fe80Ga20/Ta layers grown onto «011»-oriented PMN-32PT single crystals. After magnetic field-cooling (FC) along the [01-1] and [100] in-plane directions of PMN-32PT and upon allowing the system to relax through consecutive hysteresis loops (training effect), the exchange bias field (HEB) is measured under the action of voltage (out-of-plane poling). Depending on the applied voltage (magnitude and sign), HEB can either increase or decrease with respect to its value at 0 V. The relative variations of HEB are 24% and 5.5% after FC along the [01-1] and [100] directions, respectively. These results stem from strain-mediated magnetoelectric coupling. The applied electric field causes changes in the coercivity and the squareness ratio of the films, suggesting a reorientation of the effective magnetic easy axis in Fe80Ga20. However, larger HEB values are observed when the squareness ratio is lower. It is claimed that the effect of voltage is equivalent to an in-plane component of an applied magnetic field oriented perpendicular to the cooling field direction. Perpendicular in-plane magnetic fields have been shown to induce an increase in exchange bias in some ferromagnetic/antiferromagnetic systems due to partial recovery of the untrained antiferromagnetic state. Remarkably, here, this effect is directly induced with voltage, therefore enhancing energy efficiency., This work was supported by TÜBİTAK (The Scientific and Technological Research Council of Turkey) through the Project No. 1059B192000016. Partial financial support by the European Research Council (MAGIC-SWITCH 2019-Proof of Concept Grant, Agreement No. 875018), the European Union's Horizon 2020 research and innovation programme (European Training Network, ETN/ITN Marie Skłodowska-Curie, Agreement No. 861145), the Spanish Government (Nos. Severo Ochoa FUNFUTURE-CEX2019-000917-SMCIN, AEI/10.13039/501100011033-, MAT2017-86357-C3-1-R, PID2019-107727RB-I00, PID2020-116844RB-C21, and PDC2021-121276-C31), the Generalitat de Catalunya (No. 2017-SGR-292), and the European Regional Development Fund (No. MAT2017-86357-C3-1-R) is acknowledged. E.M. is a Serra Húnter Fellow. A.Q. acknowledges the Spanish Ministry of Science, Innovation and Universities for the Juan de la Cierva Formación Contract (No. FJC2019-039780-I)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Frequency-dependent stimulated and post-stimulated voltage control of magnetism in transition metal nitrides: towards brain-inspired magneto-ionics

  • Tan, Zhengwei
  • Rojas, Julius de
  • Martins, Sofia
  • Lopeandía, Aitor
  • Quintana, Alberto
  • Cialone, Matteo
  • Herrero Martín, Javier
  • Meersschaut, Johan
  • Vantomme, André
  • Costa Krämer, José Luis
  • Sort, Jordi
  • Menéndez, Enric
Magneto-ionics, which deals with the change of magnetic properties through voltage-driven ion migration, is expected to be one of the emerging technologies to develop energy-efficient spintronics. While a precise modulation of magnetism is achieved when voltage is applied, much more uncontrolled is the spontaneous evolution of magneto-ionic systems upon removing the electric stimuli (i.e., post-stimulated behavior). Here, we demonstrate a voltage-controllable N ion accumulation effect at the outer surface of CoN films adjacent to a liquid electrolyte, which allows for the control of magneto-ionic properties both during and after voltage pulse actuation (i.e., stimulated and post-stimulated behavior, respectively). This effect, which takes place when the CoN film thickness is below 50 nm and the voltage pulse frequency is at least 100 Hz, is based on the trade-off between generation (voltage ON) and partial depletion (voltage OFF) of ferromagnetism in CoN by magneto-ionics. This novel effect may open opportunities for new neuromorphic computing functions, such as post-stimulated neural learning under deep sleep., Financial support by the European Research Council (MAGIC-SWITCH 2019-Proof of Concept Grant, Agreement No. 875018), the European Union's Horizon 2020 research and innovation programme (European Training Network, BeMAGIC ETN/ITN Marie Skłodowska-Curie grant No. 861145; and Integrated Infrastructure, RADIATE, grant No. 824096), the Spanish Government (MAT2017-86357-C3-1-R, PID2020-116844RB-C21 and PDC2021-121276-C3), the Generalitat de Catalunya (2017-SGR-292 and 2018-LLAV-00032), the European Regional Development Fund (MAT2017-86357-C3-1-R and 2018-LLAV-00032) and the KU Leuven (BOF program) is acknowledged. A. Q. acknowledges financial support from the Spanish Ministry of Science, Innovation and Universities through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S) and the Juan de la Cierva formación contract (FJC2019-039780-I). J. S. thanks the Spanish Fábrica Nacional de Moneda y Timbre (FNMT) for fruitful discussions. The XAS measurements were performed at BL29-BOREAS beamline at ALBA Synchrotron with the collaboration of ALBA staff. We acknowledge service from MiNa Laboratory at IMN, and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE). E. M. is a Serra Húnter Fellow., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Measurement of stress distribution at the nanoscale: Towards stress nanotomography

  • Gómez, Andrés
  • Palyulin, Vladimir V.
  • Ryzhakov, Gleb V.
  • Brilliantov, Nikolai V.
  • Dubrovin, Evgeniy V.
  • Verdaguer, Albert
  • Sort, Jordi
We develop an experimental method for the in-situ stress measurement at the nanoscale. It provides a stress distribution in a contact zone between a probe and a pyroelectric crystal, based on the piezoelectric effect. We elaborate a theory of the method and demonstrate that the continuum theory of elasticity and piezoelectricity remains valid at the nanoscale. We show that the stress in the bulk of the contacting bodies may be also reconstructed, thus paving a way to 3D stress nanotomography., This work was funded by the Spanish Government (Project MAT2017-86357-C3-1-R and associated FEDER), and the Generalitat de Catalunya, Spain (2017-SGR-292). N.V.B. gratefully acknowledges the financial support from the Russian Foundation for Basic Research under Grant No. 18-29-19198., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

ZnO Nanosheet-Coated TiZrPdSiNb Alloy as a Piezoelectric Hybrid Material for Self-Stimulating Orthopedic Implants

  • Careta, Oriol
  • Fornell, Jordina
  • Pellicer, Eva
  • Ibáñez, Elena
  • Blanquer, Andreu
  • Esteve, Jaume
  • Sort, Jordi
  • Murillo Rodríguez, Gonzalo
  • Nogués, Carme
A Ti-based alloy (Ti45Zr15Pd30Si5Nb5) with already proven excellent mechanical and biocompatibility features has been coated with piezoelectric zinc oxide (ZnO) to induce the electrical self-stimulation of cells. ZnO was grown onto the pristine alloy in two different morphologies: a flat dense film and an array of nanosheets. The effect of the combined material on osteoblasts (electrically stimulable cells) was analyzed in terms of proliferation, cell adhesion, expression of differentiation markers and induction of calcium transients. Although both ZnO structures were biocompatible and did not induce inflammatory response, only the array of ZnO nanosheets was able to induce calcium transients, which improved the proliferation of Saos-2 cells and enhanced the expression of some early differentiation expression genes. The usual motion of the cells imposes strain to the ZnO nanosheets, which, in turn, create local electric fields owing to their piezoelectric character. These electric fields cause the opening of calcium voltage gates and boost cell proliferation and early differentiation. Thus, the modification of the Ti45Zr15Pd30Si5Nb5 surface with an array of ZnO nanosheets endows the alloy with smart characteristics, making it capable of electric self-stimulation., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electrodeposited Ni-based magnetic mesoporous films as smart surfaces for atomic layer deposition: an 'all-chemical' deposition approach toward 3D nanoengineered composite layers

  • Zhang, Jin
  • Quintana, Alberto|||0000-0002-9813-735X
  • Menéndez, Enric|||0000-0003-3809-2863
  • Coll, Maria Dolors
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Mesoporous Ni and Cu-Ni (Cu₂₀Ni₈₀ and Cu₄₅Ni₅₅ in at. %) films, showing a three-dimensional (3D) porous structure and tunable magnetic properties, are prepared by electrodeposition from aqueous surfactant solutions using micelles of P-123 triblock copolymer as structure-directing entities. Pores between 5 and 30 nm and dissimilar space arrangements (continuous interconnected networks, circular pores, corrugated mesophases) are obtained depending on the synthetic conditions. X-ray diffraction studies reveal that the Cu-Ni films have crystallized in the face-centered cubic structure, are textured, and exhibit certain degree of phase separation, particularly those with a higher Cu content. Atomic layer deposition (ALD) is used to conformally coat the mesopores of Cu₂₀Ni₈₀ film with amorphous Al₂O₃, rendering multiphase "nano-in-meso" metal-ceramic composites without compromising the ferromagnetic response of the metallic scaffold. From a technological viewpoint, these 3D nanoengineered composite films could be appealing for applications like magnetically actuated micro/nanoelectromechanical systems (MEMS/NEMS), voltage-driven magneto-electric devices, capacitors, or as protective coatings with superior strength and tribological performance.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Fabrication of sustainable hydrophobic and oleophilic pseudo-ordered macroporous Fe-Cu films with tunable composition and pore size via electrodeposition through colloidal templates

  • Dislaki, Evangelia|||0000-0002-3360-1588
  • Pokki, Juho
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
In this work, sustainable hydrophobic and oleophilic macroporous Fe-Cu films are fabricated using a straightforward, inexpensive and environmentally friendly two-step procedure which combines electrodeposition with the colloidal lithography technique. Elemental, morphological and structural characterization of the resulting pseudo-ordered meshes is carried out and wettability is assessed using contact angle measurements with respect to two distinct film compositions (3 at.% Fe vs 75-85 at.% Fe) and three different pore diameters (namely, 200 nm, 350 nm and 500 nm). Water contact angles are measured to be in the range of approximately 109.0-155.1° (without any post-surface functionalization) and a low contact angle hysteresis is observed in the superhydrophobic samples. The increase in the hydrophobic character of the films correlates well with an increase in surface roughness, whereas differences in composition play a minor role. For the superhydrophobic Fe-rich macroporous film, water-oil separation capability and recyclability are also demonstrated while the pore size is favorable for effective water-oil mixture and emulsion separation. The results shown here demonstrate that sustainable and affordable materials processed in a simple and cheap manner can be an asset for the removal of water-immiscible organic compounds from aqueous environments.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Micelle-assisted electrodeposition of mesoporous Fe-Pt smooth thin films onto various substrates and their electrocatalytic activity towards hydrogen evolution reaction

  • Isarain-Chávez, Eloy|||0000-0002-4154-1343
  • Baró, M. D.|||0000-0002-8636-1063
  • Alcantara, Carlos
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
Mesoporous Fe-Pt thin films are obtained by micelle-assisted electrodeposition onto metallic substrates with dissimilar activity (namely, gold, copper, and aluminum seed layers evaporated on Si/Ti) under constant applied potential (E=-1.1 V vs. Ag/AgCl) and deposition time (600 s). The amphiphilic triblock copolymer Pluronic P-123 is used as a soft template to guide the formation of mesopores. The occurrence of pores (ca. 7 nm in diameter) with narrow size distribution, distributed evenly over the surface, is observed in all cases. Despite the applied conditions being the same, the roughness and the amount of Fe incorporated in the films are influenced by the nature of the substrate. In particular, ultra-smooth films containing a larger amount of Fe (21 wt %) are obtained when deposition takes place on the Au surface. X-ray diffraction analyses reveal that Pt and Fe are alloyed to a certain extent, although some iron oxides/hydroxides also unavoidably form. The resulting films have been tested as electrocatalysts in the hydrogen evolution reaction (HER) in alkaline media. The mesoporous Fe-rich Fe-Pt films on Au show excellent HER activity and cyclability.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Micelle-assisted electrodeposition of highly mesoporous Fe-Pt nodular films with soft magnetic and electrocatalytic properties

  • Isarain-Chávez, Eloy|||0000-0002-4154-1343
  • Baró, M. D.|||0000-0002-8636-1063
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Mesoporous Fe-Pt nodular films (with a regular spatial arrangement of sub-15 nm pores) are grown onto evaporated Au, Cu and Al conductive layers by micelle-assisted electrodeposition from metal chloride salts in the presence of Pluronic P123 tri-block copolymer dissolved in the aqueous electrolytic bath. This synthetic approach constitutes a simple, one-step, versatile procedure to grow multifunctional mesoporous layers appealing for diverse applications that take advantage of materials with an ultra-high surface area-to-volume ratio. The films exhibit tuneable composition with relative Fe/Pt weight ratios, disregarding oxygen, varying from 4/96 to 52/48. All the mesoporous alloys show a soft magnetic behaviour with tuneable saturation magnetization and coercivity values (the latter ranging from ca. 5 Oe to 40 Oe). In addition, the Au/Fe-Pt deposits (even the ones with higher Fe content) exhibit good performance towards hydrogen evolution reaction in both alkaline and acidic media due to the inherent mesoporosity, with excellent stability after running 50 cycles. The interest of alloying Fe with Pt is thus two-fold: (i) to confer magnetic properties to the mesoporous alloys and (ii) to reduce the amount of the costly noble metal in the electrocatalyst in an environmentally sustainable manner.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tunable magnetism in nanoporous CuNi alloys by reversible voltage-driven element-selective redox processes

  • Quintana, Alberto|||0000-0002-9813-735X
  • Menéndez, Enric|||0000-0003-3809-2863
  • Isarain-Chávez, Eloy|||0000-0002-4154-1343
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Solsona, Pau|||0000-0001-9274-2447
  • Baró, M. D.|||0000-0002-8636-1063
  • Nogués, Josep|||0000-0003-4616-1371
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Voltage-driven manipulation of magnetism in electrodeposited 200 nm thick nanoporous single-phase solid solution Cu20 Ni80 (at%) alloy films (with sub 10 nm pore size) is accomplished by controlled reduction-oxidation (i.e., redox) processes in a protic solvent, namely 1 m NaOH aqueous solution. Owing to the selectivity of the electrochemical processes, the oxidation of the CuNi film mainly occurs on the Cu counterpart of the solid solution, resulting in a Ni-enriched alloy. As a consequence, the magnetic moment at saturation significantly increases (up to 33% enhancement with respect to the as-prepared sample), while only slight changes in coercivity are observed. Conversely, the reduction process brings Cu back to its metallic state and, remarkably, it becomes alloyed to Ni again. The reported phenomenon is fully reversible, thus allowing for the precise adjustment of the magnetic properties of this system through the sign and amplitude of the applied voltage.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhanced mechanical properties and microstructural modifications in electrodeposited Fe-W alloys through controlled heat treatments

  • Mulone, Antonio
  • Nicolenco, Aliona|||0000-0003-4624-2163
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Pellicer, Eva|||0000-0002-8901-0998
  • Tsyntsaru, N.
  • Cesiulis, Henrikas|||0000-0002-5077-7884
  • Sort, Jordi|||0000-0003-1213-3639
  • Klement, U.
Among W alloys, Fe-W has seen much attention recently, due to the need of moving toward the design of environmentally friendly materials. Coatings with 4, 16 and 24 at.% of W were electrodeposited from an environmental friendly Fe(III)-based glycolate-citrate bath. The samples were annealed in vacuum at different temperatures up to 800 °C. Different crystalline phases are formed upon annealing: α-Fe, Fe2W, Fe3W3C, Fe6W6C, and FeWO4. Their grain size and distribution within the coating was studied by means of Electron Backscattered Diffraction (EBSD) technique. The effect of annealing on the mechanical properties of the coatings was analyzed performing nanoindentation measurements. The results show a considerable increase of the hardness followed by a rapid decrease at higher temperatures. The highest hardness value, i.e. 16.5 GPa, is measured for the sample with 24 at.% of W after annealing at 600 °C owing to the precipitation of α-Fe crystallites. This study indicates the possibility to substantially increase the hardness of electrodeposited Fe-W coatings by optimization of the annealing treatment. In addition, the critical influence of the carbide and oxide phases on the mechanical properties of alloys is discussed. Hence, Fe-W coatings rich in W can be applied as a possible candidate for protective coating applications at elevated temperatures.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electrodeposition of amorphous Fe-Cr-Ni stainless steel alloy with high corrosion resistance, low cytotoxicity and soft magnetic properties

  • Bertero, Enrico|||0000-0001-6952-8741
  • Hasegawa, Madoka
  • Staubli, Samuel
  • Pellicer, Eva|||0000-0002-8901-0998
  • Herrmann, Inge K.
  • Sort, Jordi|||0000-0003-1213-3639
  • Michler, Johann|||0000-0001-8860-4068
  • Philippe, Laetitia|||0000-0003-0928-4487
Electrodeposition of Fe-Cr-Ni alloy thin films with high corrosion resistance, low cytotoxicity and soft-magnetic properties is reported. Fe-Cr-Ni films with Cr contents from 5 wt% to 40 wt% were prepared by adjusting the current density during electrodeposition and the film properties were investigated. An excellent corrosion resistance was found in films with high Cr contents (≥30 wt%), where anodic polarization performance similar to those of AISI 304 and 316L stainless steels was observed in both acidic and biological media. Cell compatibility, measured by lactate dehydrogenase assay, demonstrated that electrodeposited Fe-Cr-Ni films exhibit low cytotoxicity, comparable to AISI 304 and 316L stainless steels. Unlike AISI 304 and AISI 316L, which are conventional austenite stainless steels, the electrodeposited Fe-Cr-Ni films were found to be amorphous. This leads to soft ferromagnetic characteristics, which are dependent on the alloy composition. The unique combination of excellent corrosion resistance, low cytotoxicity and tunable magnetic properties makes this material interesting for functional coatings and components in advanced biological and medical microsystems.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Coercivity Modulation in Fe-Cu Pseudo-Ordered Porous Thin Films Controlled by an Applied Voltage, A Sustainable, Energy-Efficient Approach to Magnetoelectrically Driven Materials

  • Dislaki, Evangelia|||0000-0002-3360-1588
  • Robbennolt, Shauna|||0000-0001-5723-7971
  • Campoy-Quiles, Mariano|||0000-0002-8911-640X
  • Nogués, Josep|||0000-0003-4616-1371
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Fe-Cu films with pseudo-ordered, hierarchical porosity are prepared by a simple, two-step procedure that combines colloidal templating (using sub-micrometer-sized polystyrene spheres) with electrodeposition. The porosity degree of these films, estimated by ellipsometry measurements, is as high as 65%. The resulting magnetic properties can be controlled at room temperature using an applied electric field generated through an electric double layer in an anhydrous electrolyte. This material shows a remarkable 25% voltage-driven coercivity reduction upon application of negative voltages, with excellent reversibility when a positive voltage is applied, and a short recovery time. The pronounced reduction of coercivity is mainly ascribed to electrostatic charge accumulation at the surface of the porous alloy, which occurs over a large fraction of the electrodeposited material due to its high surface-area-to-volume ratio. The emergence of a hierarchical porosity is found to be crucial because it promotes the infiltration of the electrolyte into the structure of the film. The observed effects make this material a promising candidate to boost energy efficiency in magnetoelectrically actuated devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Large magnetoelectric effects in electrodeposited nanoporous microdisks driven by effective surface charging and magneto-ionics

  • Navarro Senent, Cristina Maria|||0000-0002-7757-0357
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Isarain-Chávez, Eloy|||0000-0002-4154-1343
  • Quintana, Alberto|||0000-0002-9813-735X
  • Menéndez, Enric|||0000-0003-3809-2863
  • Foerster, Michael|||0000-0002-4147-6668
  • Aballe, Lucía|||0000-0003-1810-8768
  • Weschke, Eugen
  • Nogués, Josep|||0000-0003-4616-1371
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
A synergetic approach to enhance magnetoelectric effects (i.e., control of magnetism with voltage) and improve energy efficiency in magnetically actuated devices is presented. The investigated material consists of an ordered array of Co-Pt microdisks, in which nanoporosity and partial oxidation are introduced during the synthetic procedure to synergetically boost the effects of electric field. The microdisks are grown by electrodeposition from an electrolyte containing an amphiphilic polymeric surfactant. The bath formulation is designed to favor the incorporation of oxygen in the form of cobalt oxide. A pronounced reduction of coercivity (88%) and a remarkable increase of Kerr signal amplitude (60%) are observed at room temperature upon subjecting the microdisks to negative voltages through an electrical double layer. These large voltage-induced changes in the magnetic properties of the microdisks are due to (i) the high surface-area-to-volume ratio with ultranarrow pore walls (sub-10 nm) that promote enhanced electric charge accumulation and (ii) magneto-ionic effects, where voltage-driven O2- migration promotes a partial reduction of CoO to Co at room temperature. This simple and versatile procedure to fabricate patterned "nano-in-micro" magnetic motifs with adjustable voltage-driven magnetic properties is very appealing for energy-efficient magnetic recording systems and other magnetoelectronic devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Voltage-controlled ON-OFF ferromagnetism at room temperature in a single metal oxide film

  • Quintana, Alberto|||0000-0002-9813-735X
  • Menéndez, Enric|||0000-0003-3809-2863
  • Liedke, Maciej O.
  • Butterling, Maik|||0000-0003-3674-0767
  • Wagner, Andreas|||0000-0001-7575-3961
  • Sireus, Verònica
  • Torruella, Pau
  • Estrade, Sonia|||0000-0002-3340-877X
  • Peiro, Francesca|||0000-0002-5697-0554
  • Dendooven, Jolien
  • Detavernier, Christophe
  • Murray, Peyton D.|||0000-0003-0389-0611
  • Allen Gilbert, Dustin
  • Liu, Kai|||0000-0001-9413-6782
  • Pellicer, Eva|||0000-0002-8901-0998
  • Nogués, Josep|||0000-0003-4616-1371
  • Sort, Jordi|||0000-0003-1213-3639
Electric-field-controlled magnetism can boost energy efficiency in widespread applications. However, technologically, this effect is facing important challenges: mechanical failure in strain-mediated piezoelectric/magnetostrictive devices, dearth of room-temperature multiferroics, or stringent thickness limitations in electrically charged metallic films. Voltage-driven ionic motion (magneto-ionics) circumvents most of these drawbacks while exhibiting interesting magnetoelectric phenomena. Nevertheless, magneto-ionics typically requires heat treatments and multicomponent heterostructures. Here we report on the electrolyte-gated and defect-mediated O and Co transport in a Co₃O₄ single layer which allows for room-temperature voltage-controlled ON-OFF ferromagnetism (magnetic switch) via internal reduction/oxidation processes. Negative voltages partially reduce Co₃O₄ to Co (ferromagnetism: ON), resulting in graded films including Co- and O-rich areas. Positive bias oxidizes Co back to Co₃O₄ (paramagnetism: OFF). This electric-field-induced atomic-scale reconfiguration process is compositionally, structurally, and magnetically reversible and self-sustained, since no oxygen source other than the Co₃O₄ itself is required. This process could lead to electric-field-controlled device concepts for spintronics.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Epitaxial versus polycrystalline shape memory Cu-Al-Ni thin films

  • Bilican, Doğa|||0000-0002-9497-5065
  • Kurdi, Samer|||0000-0002-7374-2844
  • Zhu, Yi
  • Solsona, Pau|||0000-0001-9274-2447
  • Pellicer, Eva|||0000-0002-8901-0998
  • Barber, Zoe H.
  • Greer, Alan Lindsay
  • Sort, Jordi|||0000-0003-1213-3639
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
In this work, two different approaches were followed to obtain Cu-Al-Ni thin films with shape memory potential. On the one hand, Cu-Ni/Al multilayers were grown by magnetron sputtering at room temperature. To promote diffusion and martensitic/austenitic phase transformation, the multilayers were subjected to subsequent heat treatment at 800 °C and quenched in iced water. On the other hand, Cu, Al, and Ni were co-sputtered onto heated MgO (001) substrates held at 700 °C. Energy-dispersive X-ray spectroscopy, X-ray diffraction, and transmission electron microscopy analyses were carried out to study the resulting microstructures. In the former method, with the aim of tuning the thin film's composition, and, consequently, the martensitic transformation temperature, the sputtering time and applied power were adjusted. Accordingly, martensitic Cu-14Al-4Ni (wt.%) and Cu-13Al-5Ni (wt.%) thin films and austenitic Cu-12Al-7Ni (wt.%) thin films were obtained. In the latter, in situ heating during film growth led to austenitic Cu-12Al-7Ni (wt.%) thin films with a (200) textured growth as a result of the epitaxial relationship MgO(001)[100]/Cu-Al-Ni(001)[110]. Resistance versus temperature measurements were carried out to investigate the shape memory behavior of the austenitic Cu-12Al-7Ni (wt.%) thin films produced from the two approaches. While no signs of martensitic transformation were detected in the quenched multilayered thin films, a trend that might be indicative of thermal hysteresis was encountered for the epitaxially grown thin films. In the present work, the differences in the crystallographic structure and the shape memory behavior of the Cu-Al-Ni thin films obtained by the two different preparation approaches are discussed.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Magnetically amplified photothermal therapies and multimodal imaging with magneto-plasmonic nanodomes

  • Li, Zhi
  • Aranda-Ramos, Antonio|||0000-0003-3476-7026
  • Güell Grau, Pau|||0000-0002-2363-4079
  • Tajada Herraiz, José Luis
  • Pou Macayo, Laia
  • Lope-Piedrafita, Silvia|||0000-0002-8127-6425
  • Pi, F.|||0000-0001-7347-4897
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • Baró, M. D.|||0000-0002-8636-1063
  • Sort, Jordi|||0000-0003-1213-3639
  • Nogués, Carme|||0000-0002-6361-8559
  • Nogués, Josep|||0000-0003-4616-1371
  • Sepúlveda, Borja|||0000-0002-1562-7602
Nanotherapies require new ways for controlling and improving the delivery of the therapeutic agents to the site of action to maximize their efficacy and minimize the side effects. This control is particularly relevant in photothermal treatments to reduce the required light intensity and amount of injected nanoparticles, and to minimize necrotic cell deaths. Here we present a novel concept for multifunctional nanobiomedical agents: magneto-plasmonic (MP) nanodomes for magnetically guided and amplified photothermal therapies and as contrast agents for multimodal imaging. The MP nanodomes are composed of a Fe/Au bilayer semi-shell deposited on a 100 nm diameter fluorescent polystyrene nanosphere, which gather a unique combination of straightforward functionalization, high colloidal stability, very strong ferromagnetic behavior and intense optical absorption efficiency in the near infrared. We show that the photothermal conversion efficiency of the Fe/Au nanodomes with high Fe ratios is substantially larger than pure plasmonic Au nanodomes and the state-of-art plasmonic nanoheaters, i.e. Au nanorods and nanoshells, by merging strong optical absorption, minimized scattering and low optical anisotropy. Remarkably, the effective magnetophoretic concentration of the Fe/Au nanodomes at the illumination region enables large local increase of the optically induced temperature rise. The Fe semishell also provides very intense T contrast in nuclear magnetic resonance, which is at least 15-fold larger per particle than commercial iron oxide contrast agents. Moreover, the fluorescent polystyrene nanosphere and the Au semishell integrate valuable fluorescent and X-ray contrasts, respectively, which we have used to assess the nanodomes internalization by cancer cells. The MP nanodomes are nontoxic to cells even in the case of magnetophoretic local enrichment with initially high particle concentration (100 μg/mL). Remarkably, we demonstrate amplified local photothermal treatments by the magnetic enrichment of the nanodomes at the illumination region, which enables reaching nearly 100% reduction of cell viability with low particle concentration (10 μg/mL) and mild NIR laser intensity (5 W/cm). These results highlight the high potential of MP nanodomes for magnetically guided and amplified photothermal therapies.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Flexoelectric fracture-ratchet effect in ferroelectrics

  • Cordero Edwards, Kumara|||0000-0003-3721-7863
  • Kianirad, Hoda
  • Canalias, Carlot
  • Sort, Jordi|||0000-0003-1213-3639
  • Catalan, Gustau|||0000-0003-0214-4828
The propagation front of a crack generates large strain gradients and it is therefore a strong source of gradient-induced polarization (flexoelectricity). Herein, we demonstrate that, in piezoelectric materials, a consequence of flexoelectricity is that crack propagation is helped or hindered depending on whether it is parallel or antiparallel to the piezoelectric polar axis. The discovery of crack propagation asymmetry proves that fracture physics cannot be assumed to be symmetric in polar materials, and indicates that flexoelectricity should be incorporated in any realistic model.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electrodeposition of nanocrystalline Fe-P coatings, influence of bath temperature and glycine concentration on structure, mechanical and corrosion behavior

  • Kovalska, Natalia
  • Tsyntsaru, Natalia|||0000-0002-9813-2460
  • Cesiulis, Henrikas|||0000-0002-5077-7884
  • Gebert, Annet
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
  • Hansal, Wolfgang
  • Kautek, Wolfgang|||0000-0003-2772-2049
A detailed electrochemical study and investigation of a Fe-P glycine bath as a function of the temperature and glycine concentrations and current density, and their resulting corrosion and mechanical behavior is presented. A low addition of glycine to the electrolyte led to a drastic increase of the P content. At low Fe-P deposition rates, heterogeneous rough deposits with morphological bumps and pores were observed. By increasing the Fe-P deposition rate, the number of pores were reduced drastically, resulting in smooth coatings. Increasing the P content led to the formation of nanocrystalline grains from an "amorphous-like" state. Coatings with higher P contents exhibited better corrosion resistance and hardening, most likely attributed to grain boundary strengthening.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Disentangling Highly Asymmetric Magnetoelectric Effects in Engineered Multiferroic Heterostructures

  • Menéndez, Enric|||0000-0003-3809-2863
  • Sireus, Verònica
  • Quintana, Alberto|||0000-0002-9813-735X
  • Fina, Ignasi|||0000-0003-4182-6194
  • Casals, Blai|||0000-0002-2941-1861
  • Cichelero, Rafael
  • Kataja, Mikko
  • Stengel, Massimiliano|||0000-0003-4175-3888
  • Herranz Casabona, Gervasi|||0000-0003-4633-4367
  • Catalan, Gustau|||0000-0003-0214-4828
  • Baró, M. D.|||0000-0002-8636-1063
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Sort, Jordi|||0000-0003-1213-3639
One of the main strategies to control magnetism by voltage is the use of magnetostrictive-piezoelectric hybrid materials, such as ferromagnetic-ferroelectric heterostructures. When such heterostructures are subjected to an electric field, piezostrain-mediated effects, electronic charging, and voltage-driven oxygen migration (magnetoionics) may simultaneously occur, making the interpretation of the magnetoelectric effects not straightforward and often leading to misconceptions. Typically, the strain-mediated magnetoelectric response is symmetric with respect to the sign of the applied voltage because the induced strain (and variations in the magnetization) depends on the square of the ferroelectric polarization. Conversely, asymmetric responses can be obtained from electronic charging and voltage-driven oxygen migration. By engineering a ferromagnetic-ferroelectric hybrid consisting of a magnetically soft 50-nm thick Fe75Al25 (at. %) thin film on top of a (110)-oriented Pb(Mg1/3Nb2/3)O3-32PbTiO3 ferroelectric crystal, a highly asymmetric magnetoelectric response is obtained and the aforementioned magnetoelectric effects can be disentangled. Specifically, the large thickness of the Fe75Al25 layer allows dismissing any possible charge accumulation effect, whereas no evidence of magnetoionics is observed experimentally, as expected from the high resistance to oxidation of Fe75Al25, leaving strain as the only mechanism to modulate the asymmetric magnetoelectric response. The origin of this asymmetric strain-induced magnetoelectric effect arises from the asymmetry of the polarization reversal in the particular crystallographic orientation of the ferroelectric substrate. These results are important to optimize the performance of artificial multiferroic heterostructures.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electric field control of magnetism in iron oxide nanoporous thin film

  • Robbennolt, Shauna|||0000-0001-5723-7971
  • Nicolenco, Aliona|||0000-0003-4624-2163
  • Mercier Fernández, Pau
  • Auffret, Stéphane
  • Baltz, Vincent
  • Pellicer, Eva|||0000-0002-8901-0998
  • Menéndez, Enric|||0000-0003-3809-2863
  • Sort, Jordi|||0000-0003-1213-3639
Voltage control of the magnetic properties of oxide thin films is highly appealing to enhance energy efficiency in miniaturized spintronic and magnetoelectric devices. Herein, magnetoelectric effects in electrolyte-gated nanoporous iron oxide films are investigated. Highly porous films were prepared by the evaporation-induced self-assembly of sol-gel precursors with a sacrificial block-copolymer template. For comparison, films with less porosity but analogous crystallographic structure were also prepared using an identical procedure except without the polymer template. The films were found to be 70-85 nm in thickness as measured by scanning electron microscopy and primarily hematite as determined by Raman spectroscopy. The templated (highly porous) films showed a very large magnetoelectric response with a maximum increase in magnetic moment at saturation of a factor of 13 and a noticeable (2-fold) increase of coercivity (after applying -50 V). The nontemplated films also exhibited a pronounced increase of magnetic moment at saturation of a factor of 4, although the coercivity remained unaffected over the same voltage range. Magnetoelectric effects in these latter films were found to be fully reversible in the voltage window ±10 V. The observed changes in magnetic properties are concluded to be magneto-ionically driven with oxygen ion exchange between the iron oxide and the liquid electrolyte, as evidenced from Raman and X-ray photoelectron spectroscopy experiments.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Functional macroporous iron-phosphorous films by electrodeposition on colloidal crystal templates

  • Golvano Escobal, Irati|||0000-0001-8518-8185
  • de Paz Castany, Roger|||0000-0003-4211-2636
  • Alcantara, Carlos
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • García-Lecina, Eva|||0000-0001-8915-840X
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
Pseudo-ordered macroporous iron-phosphorous (Fe-P) films have been electrodeposited potentiostatically from a citrate-sulfate bath onto Au surfaces pre-patterned with a colloidal crystal mask of polystyrene spheres of 350 nm in diameter. The electrolyte contained sodium hypophosphite as the P source, enabling the incorporation of 6-14 at.% P. For comparative purposes, continuous films have been obtained galvanostatically on unpatterned Au surfaces. In both cases, the P content could be varied to a certain extent by adjusting the deposition potential or current density. Tunable microstructure and magnetic response was observed due to the dissimilar chemical composition, with coercivity values being larger in the macroporous films. Additionally, wettability analyses showed that these were more hydrophobic, reaching contact angle values of about 130∘. In spite of their hydrophobic character, the samples were catalytic toward oxygen evolution reaction (OER) in alkaline media. The macroporous Fe-P films showed faster kinetics for OER than their nonporous counterparts. Our results show that electrodeposited porous Fe-P based materials show an interesting combination of properties which make them appealing for applications including water cleaning, soft-magnetic components, or electrocatalytic production of oxygen, to name a few.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Monolayered versus multilayered electroless NiP coatings, Impact of the plating approach on the microstructure, mechanical and corrosion properties of the coatings

  • Salicio-Paz, Asier|||0000-0002-0500-6634
  • Grande, H.
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Offoiach, R.
  • Lekka, M.
  • García-Lecina, Eva|||0000-0001-8915-840X
Electroless nickel-phosphorous (NiP) coatings were produced on low carbon steel substrates for a total plating time of 3 h. Different preparation modalities were pursued. Multilayered coatings were produced by stacking three layers of the same composition by successive electroless plating with rinsing steps in between. On the other hand, coatings termed 'monolayered' for the sake of comparison were deposited by one step electroless process, with and without undergoing bath replenishment of the electrolyte during plating. All the samples were subjected to thermal annealing at 400 °C for 1 h under argon atmosphere. The results show that the multilayer approach prevents crack propagation in the as-deposited coatings because the interfaces between layers block the advance of defects. Bath replenishment during monolayered coatings production creates pseudo-interfaces similar to those of the multilayered case but they are ineffective in terms of corrosion protection. Un-replenishment of the electrolyte promotes a change in the coating's microstructure from lamellar to columnar which severely worsens their performance. Upon annealing, the presence of interfaces, along with the recrystallization of the metallic matrix, promotes an upgrading of the corrosion performance of the multi-layered coatings. The corrosion products spread laterally at the interface where they stockpile. At a certain point, the accumulation of these by-products provokes the exfoliation of the outermost layer exposing the layer underneath to the corrosive media, thereby delaying the advancement of the corrosion attack. The results of this study highlight the importance of the plating approach selection, as well as the need for proper electrolyte maintenance during the production of high-performance electroless coatings.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Nanocrystalline electrodeposited Fe-W/Al2O3 Composites, effect of Alumina Sub-microparticles on the mechanical, tribological, and corrosion properties

  • Nicolenco, Aliona|||0000-0003-4624-2163
  • Mulone, Antonio
  • Imaz, Naroa
  • Tsyntsaru, Natalia|||0000-0002-9813-2460
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
  • Klement, Uta
  • Cesiulis, Henrikas|||0000-0002-5077-7884
  • García-Lecina, Eva|||0000-0001-8915-840X
In this study, nanocrystalline Fe-W alloy and Fe-W/Al2O3 composite coatings with various contents of sub-microsized alumina particles have been obtained by electrodeposition from an environmentally friendly Fe(III)-based electrolyte with the aim to produce a novel corrosion and wear resistant material. The increase in volume fraction of Al2O3 in deposits from 2 to 12% leads to the grain refinement effect, so that the structure of the coatings change from nanocrystalline to amorphous-like with grain sizes below 20 nm. Nevertheless, the addition of particles to the Fe-W matrix does not prevent the development of a columnar structure revealed for all the types of studied coatings. The observed reduction in both hardness and elastic modulus of the Fe-W/Al2O3 composites is attributed to the apparent grain size refinement/amorphization and the nanoporosity surrounding the embedded Al2O3 particles. In the presence of 12 vol% of Al2O3 in deposits, the wear rate decreases by a factor of 10 as compared to Fe-W alloy tested under dry friction conditions due to the lowering of tribo-oxidation. The addition of alumina particles slightly increases the corrosion resistance of the coatings; however, the corrosion in neutral chloride solution occurs through the preferential dissolution of Fe from the matrix. The obtained results provide a possibility to integrate the nanocrystalline Fe-W/Al2O3 composite coatings into various systems working under dry friction conditions, for example, in high-temperature vacuum systems.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

'Green' Cr(III)-glycine electrolyte for the production of FeCrNi coatings, Electrodeposition mechanisms and role of by-products in terms of coating composition and microstructure

  • Bertero, Enrico|||0000-0001-6952-8741
  • Manzano, Cristina V.|||0000-0001-5708-6544
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
  • Ulfig, Robert M.
  • Mischler, Stefano
  • Michler, Johann|||0000-0001-8860-4068
  • Philippe, Laetitia|||0000-0003-0928-4487
The electrodeposition of stainless steel-like FeCrNi alloys for miniaturised devices is appealing as it would allow combining excellent material properties (e.g. corrosion resistance, hardness, biocompatibility) at low-cost. However, conventional baths often contain hazardous hexavalent chromium. Cr-based alloys electrodeposited from environmentally friendly trivalent chromium electrolytes are crucial for industrial application for facilitating the transition towards sustainable and ecological production and processing. Nevertheless, this process has not been comprehensively studied or understood in depth: Especially the role of organic agents (common additives for improving Cr(iii)-based plating; e.g. glycine) in terms of material properties of the electrodeposits. The aim of this work was to investigate the electrodeposition of FeCrNi coatings from a 'green' Cr(iii)-glycine electrolyte. Novel information was attained by analysing films developed under various conditions and characterising them using a combination of advanced techniques. The evolution of microstructure (from amorphous to nanocrystalline) in correlation with film composition (i.e. metals ratio and presence of impurities) and elemental 3D spatial distribution was achieved for coatings produced from different anode materials and thermal post-treatment. The influence of Cr(iii) and glycine in terms of coating atomic contents (i.e. Fe-Cr-Ni-O-C-N-H) was evaluated for films in which both the applied current density and electrolyte composition were varied. These results, together with a thorough analysis on metals speciation/complexation allowed us to propose various Cr(iii)-based electroreduction mechanisms, and to observe, upon annealing, segregation and distribution of impurities, as well as of oxides and metals with respect to microstructure variation, providing an explanation for the amorphisation process.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Large magnetoelectric effects mediated by electric-field-driven nanoscale phase transformations in sputtered (nanoparticulate) and electrochemically dealloyed (nanoporous) Fe-Cu films

  • Robbennolt, Shauna|||0000-0001-5723-7971
  • Quintana, Alberto|||0000-0002-9813-735X
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Large magnetoelectric effects are observed in as-sputtered (nanoparticulate-like) and electrochemically dealloyed (nanoporous) 200 nm thick Fe-Cu films. Large magnetoelectric effects are observed in as-sputtered (nanoparticulate-like) and electrochemically dealloyed (nanoporous) 200 nm thick Fe-Cu films. Application of positive voltages decreases both the saturation magnetization (M ) and coercivity (H ) of the films, while negative voltages cause the reverse effect (increase of M and H ). The relative variations are as high as 20% for M and beyond 100% for H , both for the as-sputtered and dealloyed states. These changes in magnetic properties are caused by controlled and reversible electric-field-driven nanoscale phase transformations between face-centered cubic (fcc) and body-centered cubic (bcc) structures. These phase transitions are in turn due to selective redox reactions induced by the applied voltage, which can be regarded as a "magnetoionic effect." The controlled tuning of H and M with the moderate values of applied voltage, together with the sustainable composition of the investigated alloys (not containing noble metals, as opposed to many previous works on magnetoelectric effects in thin films), pave the way towards the implementation of magnetic and spintronic devices with enhanced energy efficiency and functionalities.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Strain gradient mediated magnetoelectricity in Fe-Ga/P(VDF-TrFE) multiferroic bilayers integrated on silicon

  • Nicolenco, Aliona|||0000-0003-4624-2163
  • Gómez, Andrés|||0000-0003-2847-0138
  • Chen, Xiangzhong|||0000-0002-2294-7487
  • Menéndez, Enric|||0000-0003-3809-2863
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
The primary advantage of magnetoelectric heterostructures exhibiting direct magnetoelectric effect is the possibility to induce and modulate the electrical response of the ferroelectric phase directly with an external magnetic field (i.e., wirelessly, without applying electric field). Nevertheless, the magnetoelectric coupling in such heterostructures is commonly limited by substrate clamping which hinders effective strain propagation. In this work, 1 μm thick ferromagnetic Fe-Ga layers were electrodeposited onto rigid Si/Cu substrates and subsequently coated with ferroelectric P(VDF-TrFE). Under magnetic field, the (110) textured Fe-Ga alloy is compressed along the z-direction by 0.033%, as demonstrated by X-ray diffraction. The experimental results suggest that while the bottom of the Fe-Ga layer is clamped, its air side exhibits a pronounced tetragonal deformation thanks to the residual nanoporosity existing between the columnar grains, that is, a strain gradient develops across the thickness of the Fe-Ga film. This strain gradient in Fe-Ga induces a change in the piezoresponse of the adjacent ferroelectric P(VDF-TrFE) layer. These results pave the way to the design of high-performance microelectromechanical systems (MEMS) with magnetoelectric response integrated on rigid substrates.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electrolyte-gated magnetoelectric actuation, Phenomenology, materials, mechanisms, and prospective applications

  • Navarro Senent, Cristina Maria|||0000-0002-7757-0357
  • Quintana, Alberto|||0000-0002-9813-735X
  • Menéndez, Enric|||0000-0003-3809-2863
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Manipulation of the magnetic behavior of materials with voltage (i.e., magnetoelectric actuation) has become a topic of intense research during the last years. Apart from its obvious interest from a basic science standpoint, control and eventual switching of the magnetization without applying any external magnetic field (or spin polarized current) has the potential to drastically reduce the power consumption of magnetic devices due to the lack (or minimization) of Joule heating dissipation effects. Herein, an overview of the state-of-the-art of electrolyte-gated magnetoelectric actuation (where an electric field is applied using an electrolyte, either liquid or solid) is provided. The different types of mechanisms responsible for voltage-driven magnetic actuation (surface charging, ionic migration, also termed "magneto-ionics," reduction/oxidation reactions, and ferroelectric/ferromagnetic coupling) are summarized. The various effects (changes in coercivity, anisotropy easy axis, exchange bias field, saturation magnetization, Curie temperature, etc.) observed in the different types of materials investigated so far (mainly metallic thin films and semiconductors, porous alloys, and nanocomposite structures) are described. The potential applications of electrolyte-gated magnetoelectric actuation in devices as well as the current challenges in the field are also reviewed with the aim of providing the basic ingredients for further prospects and technological advancements in this area.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Reversible, electric-field induced magneto-tonic control of magnetism in mesoporous cobalt ferrite thin films

  • Robbennolt, Shauna|||0000-0001-5723-7971
  • Menéndez, Enric|||0000-0003-3809-2863
  • Quintana, Alberto|||0000-0002-9813-735X
  • Gómez, Andrés|||0000-0003-2847-0138
  • Auffret, Stéphane
  • Baltz, Vincent
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
The magnetic properties of mesoporous cobalt ferrite films can be largely tuned by the application of an electric field using a liquid dielectric electrolyte. By applying a negative voltage, the cobalt ferrite becomes reduced, leading to an increase in saturation magnetization of 15% (M) and reduction in coercivity (H) between 5-28%, depending on the voltage applied (-10 V to -50 V). These changes are mainly non-volatile so after removal of -10 V M remains 12% higher (and H 5% smaller) than the pristine sample. All changes can then be reversed with a positive voltage to recover the initial properties even after the application of -50 V. Similar studies were done on analogous films without induced porosity and the effects were much smaller, underscoring the importance of nanoporosity in our system. The different mechanisms possibly responsible for the observed effects are discussed and we conclude that our observations are compatible with voltage-driven oxygen migration (i.e., the magneto-ionic effect).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Boosting room-temperature magneto-ionics in a non-magnetic oxide semiconductor

  • de Rojas, Julius|||0000-0002-1206-4744
  • Quintana, Alberto|||0000-0002-9813-735X
  • Lopeandia, Aitor|||0000-0003-0566-8299
  • Salguero, Joaquín
  • Costa-Krämer, José L.|||0000-0002-7664-2195
  • Abad, Llibertat|||0000-0003-2637-8629
  • Liedke, Maciej Oskar|||0000-0001-7933-7295
  • Butterling, Maik|||0000-0003-3674-0767
  • Wagner, Andreas|||0000-0001-7575-3961
  • Henderick, Lowie
  • Dendooven, Jolien
  • Detavernier, Christophe
  • Sort, Jordi|||0000-0003-1213-3639
  • Menéndez, Enric|||0000-0003-3809-2863
Voltage control of magnetism through electric field-induced oxygen motion (magneto-ionics) could represent a significant breakthrough in the pursuit for new strategies to enhance energy efficiency in magnetically actuated devices. Boosting the induced changes in magnetization, magneto-ionic rates and cyclability continue to be key challenges to turn magneto-ionics into real applications. Here, it is demonstrated that room-temperature magneto-ionic effects in electrolyte-gated paramagnetic Co3O4 films can be largely increased both in terms of generated magnetization (6 times larger) and speed (35 times faster) if the electric field is applied using an electrochemical capacitor configuration (utilizing an underlying conducting buffer layer) instead of placing the electric contacts at the side of the semiconductor (electric-double-layer transistor-like configuration). This is due to the greater uniformity and strength of the electric field in the capacitor design. These results are appealing to widen the use of ion migration in technological applications such as neuromorphic computing or iontronics in general.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tailoring magnetic and mechanical properties of mesoporous single-phase Ni-Pt films by electrodeposition

  • Eiler, Konrad|||0000-0001-8648-6395
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Navarro Senent, Cristina Maria|||0000-0002-7757-0357
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Homogeneous mesoporous Ni-rich Ni-Pt thin films with adjustable composition have been synthesised by one-step micelle-assisted electrodeposition. The films exhibit a face-centred cubic solid solution (single phase) and their magnetic and mechanical properties can be tuned by varying the alloy composition. In particular, the Curie temperature (TC) is shown to decrease with the Pt content and thin films with a TC close to room temperature (i.e. Ni58Pt42) and below can be produced. Hysteresis loops show a decrease of saturation magnetisation (Ms) and coercivity (Hc) with decreasing Ni content. A comparison of porous and dense films reveals significantly lower saturation magnetic field strength for porous films. Concerning mechanical properties, mainly two trends can be observed: a decrease of the Young's modulus of the nanoporous films with respect to dense films by 10% in average and a progressive increase of Young's modulus with the Ni content from 4.2 GPa to 5.7 GPa in both types of films. The tunability of properties and facility of synthesis make this alloy a promising material for microelectromechanical systems (MEMS).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Unraveling the properties of sharply defined submicron scale FeCu and FePd magnetic structures fabricated by electrodeposition onto electron-beam-lithographed substrates

  • Dislaki, Evangelia|||0000-0002-3360-1588
  • Cialone, Matteo|||0000-0002-3018-2787
  • Celegato, Federica|||0000-0002-7076-6234
  • Rizzi, Paola|||0000-0002-3977-2839
  • Tiberto, Paola|||0000-0002-7409-2281
  • Vadilonga, Simone
  • Többens, Daniel
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
In this work, Fe-X (X = Cu, Pd) submicron-scale structures were electrodeposited onto pre-patterned substrates prepared by e-beam lithography. The FeCu and FePd (with reduced Pd content) systems were investigated as attractive candidates for a variety of potential applications in magnetic data storage and biomedicine. Confined growth in the restricted cavities resulted in a nanoscale grain size leading to well-defined geometries with sharp edges and corners and an average height of up to 215 nm. Specifically, nine 100 μm × 100 μm arrays of three geometries (cylindrical, rectangular and cruciform) in three different sizes were created. In addition, the total deposition time ranged from 3.5 s (FeCu) to 200 s (FePd), i.e. much faster than by traditional physical vapor deposition approaches and was performed at ambient conditions. Magnetic force microscopy for the cylindrical and cruciform structures revealed virtually no contrast at zero field, suggesting magnetic curling effects (instead of coherent rotation) during magnetization reversal. These curling effects result in low values of remanent magnetization, which is advantageous in minimizing dipolar interactions between the structures either when they are deposited onto the substrate or eventually dispersed in a liquid (e.g. in biomedical applications, as drug delivery carriers, where particle agglomeration is undesirable).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Voltage-driven motion of nitrogen ions, a new paradigm for magneto-ionics

  • de Rojas, Julius|||0000-0002-1206-4744
  • Quintana, Alberto|||0000-0002-9813-735X
  • Lopeandia, Aitor|||0000-0003-0566-8299
  • Salguero, Joaquín
  • Muñiz, Beatriz
  • Ibrahim, Fatima
  • Chshiev, Mairbek|||0000-0001-9232-7622
  • Nicolenco, Aliona|||0000-0003-4624-2163
  • Liedke, Maciej Oskar|||0000-0001-7933-7295
  • Butterling, Maik|||0000-0003-3674-0767
  • Wagner, Andreas|||0000-0001-7575-3961
  • Sireus, Veronica
  • Abad, Llibertat|||0000-0003-2637-8629
  • Jensen, Christopher J.|||0000-0001-7459-1841
  • Liu, Kai|||0000-0001-9413-6782
  • Nogués, Josep|||0000-0003-4616-1371
  • Costa-Krämer, José L.|||0000-0002-7664-2195
  • Menéndez, Enric|||0000-0003-3809-2863
  • Sort, Jordi|||0000-0003-1213-3639
Magneto-ionics, understood as voltage-driven ion transport in magnetic materials, has largely relied on controlled migration of oxygen ions. Here, we demonstrate room-temperature voltage-driven nitrogen transport (i.e., nitrogen magneto-ionics) by electrolyte-gating of a CoN film. Nitrogen magneto-ionics in CoN is compared to oxygen magneto-ionics in Co3O4. Both materials are nanocrystalline (face-centered cubic structure) and show reversible voltage-driven ON-OFF ferromagnetism. In contrast to oxygen, nitrogen transport occurs uniformly creating a plane-wave-like migration front, without assistance of diffusion channels. Remarkably, nitrogen magneto-ionics requires lower threshold voltages and exhibits enhanced rates and cyclability. This is due to the lower activation energy for ion diffusion and the lower electronegativity of nitrogen compared to oxygen. These results may open new avenues in applications such as brain-inspired computing or iontronics in general.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The order of addition and time matters, Impact of electrolyte processing on micelle-assisted electrosynthesis of mesoporous alloys

  • Navarro Senent, Cristina Maria|||0000-0002-7757-0357
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
Mesoporous thin films are currently awaking a considerable interest for their prospective use in applications ranging from catalysis to energy storage. Yet, some of the synthetic parameters enabling a reproducible development of mesoporosity remain uncontrolled. In this research, we demonstrate that a subtle change in the procedure for the electrolyte preparation for the electrosynthesis of mesoporous Co‒Pt films is critical for reproducing the mesoporosity of the alloys. Specifically, we show that dissolution of the platinum salt (Na2PtCl6·6H2O) in water and storage of the solution (referred to as 'equilibration time') before adding the remaining reagents and additives (CoCl2 and P-123) are imperative to consistently reproduce the films mesoporosity. Highly mesoporous Pt-rich Co‒Pt films (10-23 at.% Co), with a pore diameter of 10‒17 nm, were obtained from an electrolyte that involved an equilibration time, while mesoporosity was often absent in films grown from a freshly prepared electrolyte (i.e., upon dissolving all chemicals immediately before electrodeposition). The results suggest that pore formation is governed by the complexation dynamics of Pt(IV) in water, which was investigated by UV-vis spectroscopy. Namely, the concentration of hydroxochloroplatinate complexes ([PtCl6-x(OH)x]2-) originating from the exchange of Cl- by OH- ions increase during the equilibration time. [PtCl6-x(OH)x]2- species would interact more favorably with the hydrophilic poly(ethylene oxide) moieities of P-123 micelles than [PtCl6]2-. The distinct interaction between micelles and the complexes of platinum is key for the reproducible generation of a mesoporous network. Our finding highlights the relevant role of electrolyte processing for the control of mesoporosity in metallic systems prepared by micelle-assisted electrodeposition, which we believe can be extended to many electrolytic processes.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Magneto-ionic control of magnetism in two-oxide nanocomposite thin films comprising mesoporous cobalt ferrite conformally nanocoated with HfO2

  • Robbennolt, Shauna|||0000-0001-5723-7971
  • Yu, Pengmei
  • Nicolenco, Aliona|||0000-0003-4624-2163
  • Mercier Fernández, Pau
  • Coll, Mariona|||0000-0001-5157-7764
  • Sort, Jordi|||0000-0003-1213-3639
Advances in nanotechnology require of robust methods to fabricate new types of nanostructured materials whose properties can be controlled at will using simple procedures. Nanoscale composites can benefit from actuation protocols that involve mutual interfacial interactions on the nanoscale. Herein, a method to create nanoscale composite thin films consisting of mesoporous cobalt ferrite (CFO) whose pore walls are nanocoated with HfO2 is presented. Porous CFO films are first prepared by sol-gel. Atomic layer deposition is subsequently used to conformally grow a HfO2 layer at the surface of the pore walls, throughout the thickness of the films. The magnetic properties of uncoated and HfO2-coated CFO mesoporous films are then modulated by applying external voltage, via magneto-ionic effects. The CFO-HfO2 composite films exhibit an enhanced magnetoelectric response. The magnetic moment at saturation of the composite increases 56% upon the application of -50 V (compared to 24% for CFO alone). Furthermore, dissimilar trends in coercivity are observed: after applying -50 V, the coercivity of the composite film increases by 69% while the coercivity of the CFO alone decreases by 25%. The effects can be reversed applying suitable positive voltages. This two-oxide nanocomposite material differs from archetypical magneto-ionic architectures, in which voltage-driven ion migration is induced between fully-metallic and oxide counterparts. The synthesized material is particularly appealing to develop new types of magnetoelectric devices with a highly tunable magnetic response.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Local manipulation of metamagnetism by strain nanopatterning

  • Foerster, Michael|||0000-0002-4147-6668
  • Menéndez, Enric|||0000-0003-3809-2863
  • Coy, Emerson|||0000-0002-4149-9720
  • Quintana, Alberto|||0000-0002-9813-735X
  • Gómez-Olivella, Carles|||0000-0002-1656-2951
  • Esqué-de los Ojos, Daniel|||0000-0002-6279-2037
  • Vallcorba Valls, Oriol|||0000-0001-6499-7688
  • Frontera, Carlos|||0000-0002-0091-4756
  • Aballe, Lucía|||0000-0003-1810-8768
  • Nogués, Josep|||0000-0003-4616-1371
  • Sort, Jordi|||0000-0003-1213-3639
  • Fina, Ignasi|||0000-0003-4182-6194
Among metamagnetic materials, FeRh alloys are technologically appealing due to their uncommon antiferromagnetic-to-ferromagnetic metamagnetic transition which occurs at a temperature T* just above room temperature. Here, a controlled increase of T* (ΔT* ∼ 20 °C) is induced in pre-selected regions of FeRh films via mechanical strain nanopatterning. Compressive stresses generated at the vicinity of pre-defined nanoindentation imprints cause a local reduction of the FeRh crystallographic unit cell parameter, which leads to an increase of T* in these confined micro-/nanometric areas. This enhances the stability of the antiferromagnetic phase in these localized regions. Remarkably, generation of periodic arrays of nanopatterned features also allows modifying the overall magnetic and electric transport properties across large areas of the FeRh films. This approach is highly appealing for the design of new memory architectures or other AFM-spintronic devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhancing magneto-ionic effects in magnetic nanostructured films via conformal deposition of nanolayers with oxygen acceptor/donor capabilities

  • Navarro Senent, Cristina Maria|||0000-0002-7757-0357
  • Quintana, Alberto|||0000-0002-9813-735X
  • Isarain-Chávez, Eloy|||0000-0002-4154-1343
  • Weschke, Eugen
  • Yu, Pengmei
  • Coll, Mariona|||0000-0001-5157-7764
  • Pellicer, Eva|||0000-0002-8901-0998
  • Menéndez, Enric|||0000-0003-3809-2863
  • Sort, Jordi|||0000-0003-1213-3639
Effective manipulation of the magnetic properties of nanostructured metallic alloys, exhibiting intergrain porosity (i.e., channels) and conformally coated with insulating oxide nanolayers, with an electric field is demonstrated. Nanostructured Co-Pt films are grown by electrodeposition (ED) and subsequently coated with either AlOx or HfOx by atomic layer deposition (ALD) to promote magneto-ionic effects (i.e., voltage-driven ion migration) during electrolyte gating. Pronounced variations in coercivity (HC) and magnetic moment at saturation (mS) are found at room temperature after biasing the heterostructures. The application of a negative voltage results in a decrease of HC and an increase of mS, whereas the opposite trend is achieved for positive voltages. Although magneto-ionic phenomena are already observed in uncoated Co-Pt films (because of the inherent presence of oxygen), the ALD oxide nanocoatings serve to drastically enhance the magneto-ionic effects because of partially reversible oxygen migration, driven by voltage, across the interface between AlOx or HfOx and the nanostructured Co-Pt film. Co-Pt/HfOx heterostructures exhibit the most significant magneto-electric response at negative voltages, with an increase of mS up to 76% and a decrease of HC by 58%. The combination of a nanostructured magnetic alloy and a skinlike insulating oxide nanocoating is shown to be appealing to enhance magneto-ionic effects, potentially enabling electrolyte-gated magneto-ionic technology.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Piezoelectrically enhanced photocatalysis with BiFeO3 nanostructures for efficient water remediation

  • Mushtaq, Fajer
  • Chen, Xiangzhong|||0000-0002-2294-7487
  • Hoop, Marcus
  • Torlakcik, Harun
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
  • Gattinoni, Chiara
  • Nelson, Bradley J.|||0000-0001-9070-6987
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
Designing new catalysts that can efficiently utilize multiple energy sources can contribute to solving the current challenges of environmental remediation and increasing energy demands. In this work, we fabricated single-crystalline BiFeO3 (BFO) nanosheets and nanowires that can successfully harness visible light and mechanical vibrations and utilize them for degradation of organic pollutants. Under visible light both BFO nanostructures displayed a relatively slow reaction rate. However, under piezocatalysis both nanosheets and nanowires exhibited higher reaction rates in comparison with photocatalytic degradation. When both solar light and mechanical vibrations were used simultaneously, the reaction rates were elevated even further, with the BFO nanowires degrading 97% of RhB dye within 1 hr (k-value 0.058 min-1). The enhanced degradation under mechanical vibrations can be attributed to the promotion of charge separation caused by the internal piezoelectric field of BFO. BFO nanowires also exhibited good reusability and versatility toward degrading four different organic pollutants.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Synthesis of α-Fe2O3 and Fe-Mn oxide foams with highly tunable magnetic properties by the replication method from polyurethane templates

  • Feng, Yuping
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Zhang, Huiyan
  • Solsona, Pau|||0000-0001-9274-2447
  • Baró, M. D.|||0000-0002-8636-1063
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Open cell foams consisting of Fe and Fe-Mn oxides are prepared from metallic Fe and Mn powder precursors by the replication method using porous polyurethane (PU) templates. First, reticulated PU templates are coated by slurry impregnation. The templates are then thermally removed at 260 °C and the debinded powders are sintered at 1000 °C under N2 atmosphere. The morphology, structure, and magnetic properties are studied by scanning electron microscopy, X-ray diffraction and vibrating sample magnetometry, respectively. The obtained Fe and Fe-Mn oxide foams possess both high surface area and homogeneous open-cell structure. Hematite (α-Fe2O3) foams are obtained from the metallic iron slurry independently of the N2 flow. In contrast, the microstructure of the FeMn-based oxide foams can be tailored by adjusting the N2 flow. While the main phases for a N2 flow rate of 180 L/h are α-Fe2O3 and FeMnO3, the predominant phase for high N2 flow rates (e.g., 650 L/h) is Fe2MnO4. Accordingly, a linear magnetization versus field behavior is observed for the hematite foams, while clear hysteresis loops are obtained for the Fe2MnO4 foams. Actually, the saturation magnetization of the foams containing Mn increases from 5 emu/g to 52 emu/g when the N2 flow rate (i.e., the amount of Fe2MnO4) is increased. The obtained foams are appealing for a wide range of applications, such as electromagnetic absorbers, catalysts supports, thermal and acoustic insulation systems or wirelessly magnetically-guided porous objects in fluids.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Structural and magnetic properties of FexCu1-x sputtered thin films electrochemically treated to create nanoporosity for high-surface-area magnetic components

  • Robbennolt, Shauna|||0000-0001-5723-7971
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Quintana, Alberto|||0000-0002-9813-735X
  • Zhang, Huiyan
  • Menéndez, Enric|||0000-0003-3809-2863
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Sputter deposition is a facile and widely used technique for fabricating thin-film materials. Electrochemical dealloying, on the other hand, is a promising method for creating nanoporosity, and therefore increasing surface area, in metallic materials. Surprisingly, little work has been done on the application of electrochemical dealloying to sputter-deposited thin films. Here, we prepare FexCu1-x thin films by sputter deposition to be then electrochemically treated to create porosity. We investigate the structural and magnetic properties of as-sputtered and electrochemically treated films. We find that the morphology, crystal structure, and magnetic properties are highly dependent on initial film composition. For high copper content films (Fe29Cu71), relative Cu content is found to decrease during the dealloying process. For these films, the crystal structure is not greatly affected by the induced porosity and the porous films show increased saturation magnetization. However, for the more Fe-rich compositions (Fe63Cu37), we find that Fe is preferentially lost and making the films nanoporous induces a crystal structure change from body-centered cubic (bcc) to a mixture of face-centered cubic (fcc) and bccphases. These same porous films show a decrease in saturation magnetization and a large increase in coercivity compared to the as-sputtered films. These films are attractive as high-surface-area magnetic components because of the tunability of their magnetic properties and their high surface area due to porosity. To the best of our knowledge, these results constitute the first example of nanoporous, magnetic thin films by prepared by sputtering and subsequent electrochemical treatment.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Reversible and magnetically unassisted voltage-driven switching of magnetization in FeRh/PMN-PT

  • Fina, Ignasi|||0000-0003-4182-6194
  • Quintana, Alberto|||0000-0002-9813-735X
  • Martí, Xavier
  • Sánchez Barrera, Florencio|||0000-0002-5314-453X
  • Foerster, Michael|||0000-0002-4147-6668
  • Aballe, Lucía|||0000-0003-1810-8768
  • Sort, Jordi|||0000-0003-1213-3639
  • Fontcuberta, Josep|||0000-0002-7955-2320
Reversible control of magnetization by electric fields without assistance from a subsidiary magnetic field or electric current could help reduce the power consumption in spintronic devices. When increasing temperature above room temperature, FeRh displays an uncommon antiferromagnetic to ferromagnetic phase transition linked to a unit cell volume expansion. Thus, using the strain exerted by an adjacent piezoelectric layer, the relative amount of antiferromagnetic and ferromagnetic regions can be tuned by an electric field applied to the piezoelectric material. Indeed, large variations in the saturation magnetization have been observed when straining FeRh films grown on suitable piezoelectric substrates. In view of its applications, the variations in the remanent magnetization rather than those of the saturation magnetization are the most relevant. Here, we show that in the absence of any bias external magnetic field, permanent and reversible magnetization changes as high as 34% can be induced by an electric field, which remain after this has been zeroed. Bulk and local magnetoelectric characterization reveals that the fundamental reason for the large magnetoelectric response observed at remanence is the expansion (rather than the nucleation) of ferromagnetic nanoregions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electroless Palladium-Coated Polymer Scaffolds for Electrical Stimulation of Osteoblast-Like Saos-2 Cells

  • Careta, Oriol|||0000-0003-1333-0300
  • Salicio-Paz, Asier|||0000-0002-0500-6634
  • Pellicer, Eva|||0000-0002-8901-0998
  • Ibáñez, Elena|||0000-0002-0275-6958
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • García-Lecina, Eva|||0000-0001-8915-840X
  • Sort, Jordi|||0000-0003-1213-3639
  • Nogués, Carme|||0000-0002-6361-8559
Three-dimensional porous scaffolds offer some advantages over conventional treatments for bone tissue engineering. Amongst all non-bioresorbable scaffolds, biocompatible metallic scaffolds are preferred over ceramic and polymeric scaffolds, as they can be used as electrodes with different electric field intensities (or voltages) for electric stimulation (ES). In the present work we have used a palladium-coated polymeric scaffold, generated by electroless deposition, as a bipolar electrode to electrically stimulate human osteoblast-like Saos-2 cells. Cells grown on palladium-coated polyurethane foams under ES presented higher proliferation than cells grown on foams without ES for up to 14 days. In addition, cells grown in both conditions were well adhered, with a flat appearance and a typical actin cytoskeleton distribution. However, after 28 days in culture, cells without ES were filling the entire structure, while cells under ES appeared rounded and not well adhered, a sign of cell death onset. Regarding osteoblast differentiation, ES seems to enhance the expression of early expressed genes. The results suggest that palladium-coated polyurethane foams may be good candidates for osteoblast scaffolds and demonstrate that ES enhances osteoblast proliferation up to 14 days and upregulate expression genes related to extracellular matrix formation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Full optimization of an electroless nickel solution, boosting the performance of low-phosphorous coatings

  • Salicio-Paz, Asier|||0000-0002-0500-6634
  • Ugarte, Ixone
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
  • García-Lecina, Eva|||0000-0001-8915-840X
Univariate and multivariate optimizations of a novel electroless nickel formulation have been carried out by means of the Taguchi method. From the compositional point of view, adjustment of the complexing agent concentration in solution is crucial for fine-tuning free Ni2+ ions concentration and, in turn, the mechanical properties of the resulting coatings. The Ni (II) concentration and the pH are the main parameters which help restrict the incorporation of phosphorous into the Ni layers. On the other hand, the stirring rate, the pH and the reducing agent concentration are the most influential parameters for the corrosion resistance of the coatings. Multivariate optimization of the electrolyte leads to a set of optimized parameters in which the mechanical properties (hardness and worn volume) of the layers are similar to the optimal values achieved in the univariate optimization, but the corrosion rate is decreased by one order of magnitude.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

ZnO Nanosheet-Coated TiZrPdSiNb Alloy as a Piezoelectric Hybrid Material for Self-Stimulating Orthopedic Implants

  • Careta, Oriol|||0000-0003-1333-0300
  • Esteve, Jaume|||0000-0001-9440-7984
  • Sort, Jordi|||0000-0003-1213-3639
  • Murillo, Gonzalo|||0000-0002-0368-1900
  • Nogués, Carme|||0000-0002-6361-8559
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Pellicer, Eva|||0000-0002-8901-0998
  • Ibáñez, Elena|||0000-0002-0275-6958
  • Blanquer, Andreu|||0000-0002-3551-1885
A Ti-based alloy (Ti45Zr15Pd30Si5Nb5) with already proven excellent mechanical and biocompatibility features has been coated with piezoelectric zinc oxide (ZnO) to induce the electrical self-stimulation of cells. ZnO was grown onto the pristine alloy in two different morphologies: a flat dense film and an array of nanosheets. The effect of the combined material on osteoblasts (electrically stimulable cells) was analyzed in terms of proliferation, cell adhesion, expression of differentiation markers and induction of calcium transients. Although both ZnO structures were biocompatible and did not induce inflammatory response, only the array of ZnO nanosheets was able to induce calcium transients, which improved the proliferation of Saos-2 cells and enhanced the expression of some early differentiation expression genes. The usual motion of the cells imposes strain to the ZnO nanosheets, which, in turn, create local electric fields owing to their piezoelectric character. These electric fields cause the opening of calcium voltage gates and boost cell proliferation and early differentiation. Thus, the modification of the Ti45Zr15Pd30Si5Nb5 surface with an array of ZnO nanosheets endows the alloy with smart characteristics, making it capable of electric self-stimulation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Strain-gradient effects in nanoscale-engineered magnetoelectric materials

  • Nicolenco, Aliona|||0000-0003-4624-2163
  • de h-Óra, Muireann|||0000-0002-2070-0755
  • Driscoll, Judith|||0000-0003-4987-6620
  • Sort, Jordi|||0000-0003-1213-3639
Understanding strain gradient phenomena is of paramount importance in diverse areas of condensed matter physics. This effect is responsible for flexoelectricity in dielectric materials, and it plays a crucial role in the mechanical behavior of nanoscale-sized specimens. In magnetoelectric composites, which comprise piezoelectric or ferroelectric (FE) materials coupled to magnetostrictive (MS) phases, the strain gradient can add to any uniform strain that is present to boost the strength of the coupling. Hence, it could be advantageous to develop new types of functionally graded multiferroic composites (for information technologies) or magnetic-field-driven flexoelectric/magnetostrictive platforms for wireless neurons/muscle cell stimulation (in biomedicine). In MS or FE materials with non-fully constrained geometries (e.g., cantilevers, porous layers, or vertically aligned patterned films), strain gradients can be generated by applying a magnetic field (to MS phases) or an electric field (to, e.g., FE phases). While multiferroic composites operating using uniform strains have been extensively investigated in the past, examples of new nanoengineering strategies to achieve strain-gradient-mediated magnetoelectric effects that could ultimately lead to high flexomagnetoelectric effects are discussed in this Perspective.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Biodegradable small-scale swimmers for biomedical applications

  • Llacer-Wintle, Joaquin|||0000-0002-2504-7548
  • Rivas-Dapena, Antón
  • Chen, Xiangzhong|||0000-0002-2294-7487
  • Pellicer, Eva|||0000-0002-8901-0998
  • Nelson, Bradley J.|||0000-0001-9070-6987
  • Puigmarti-Luis, Josep|||0000-0002-7510-9815
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
Most forms of biomatter are ephemeral, which means they transform or deteriorate after a certain time. From this perspective, implantable healthcare devices designed for temporary treatments should exhibit the ability to degrade and either blend in with healthy tissues, or be cleared from the body with minimal disruption after accomplishing their designated tasks. This topic is currently being investigated in the field of biomedical micro- and nanoswimmers. These tiny devices have the ability to move through fluids by converting physical or chemical energy into motion. Several architectures of these devices have been designed to mimic the motion strategies of nature's motile microorganisms and cells. Due to their motion abilities, these devices have been proposed as minimally invasive tools for precision healthcare applications. Hence, a natural progression in this field is to produce motile structures that can adopt, or even surpass, similar transient features as biological systems. The fate of small-scale swimmers after accomplishing their therapeutic mission is critical for the successful translation of small-scale swimmers' technologies into clinical applications. In this review, recent research efforts are summarized on the topic of biodegradable micro- and nanoswimmers for biomedical applications, with a focus on targeted therapeutic delivery.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Dynamic electric-field-induced magnetic effects in cobalt oxide thin films, towards magneto-ionic synapses

  • Martins, Sofia|||0000-0002-1801-1651
  • de Rojas, Julius|||0000-0002-1206-4744
  • Tan, Zhengwei|||0000-0003-4142-0637
  • Cialone, Matteo|||0000-0002-3018-2787
  • Lopeandia, Aitor|||0000-0003-0566-8299
  • Herrero-Martín, Javier|||0000-0003-1986-8128
  • Costa-Krämer, José L.|||0000-0002-7664-2195
  • Menéndez, Enric|||0000-0003-3809-2863
  • Sort, Jordi|||0000-0003-1213-3639
Voltage control of magnetism via electric-field-driven ion migration (magneto-ionics) has generated intense interest due to its potential to greatly reduce heat dissipation in a wide range of information technology devices, such as magnetic memories, spintronic systems or artificial neural networks. Among other effects, oxygen ion migration in transition-metal-oxide thin films can lead to the generation or full suppression of controlled amounts of ferromagnetism ('ON-OFF' magnetic transitions) in a non-volatile and fully reversible manner. However, oxygen magneto-ionic rates at room temperature are generally considered too slow for industrial applications. Here, we demonstrate that sub-second ON-OFF transitions in electrolyte-gated paramagnetic cobalt oxide films can be achieved by drastically reducing the film thickness from.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Magneto-ionics in single-layer transition metal nitrides

  • de Rojas, Julius|||0000-0002-1206-4744
  • Salguero, Joaquín
  • Ibrahim, Fatima
  • Chshiev, Mairbek|||0000-0001-9232-7622
  • Quintana, Alberto|||0000-0002-9813-735X
  • Lopeandia, Aitor|||0000-0003-0566-8299
  • Liedke, Maciej Oskar|||0000-0001-7933-7295
  • Butterling, Maik|||0000-0003-3674-0767
  • Hirschmann, Eric
  • Wagner, Andreas|||0000-0001-7575-3961
  • Abad, Llibertat|||0000-0003-2637-8629
  • Costa-Krämer, José L.|||0000-0002-7664-2195
  • Menéndez, Enric|||0000-0003-3809-2863
  • Sort, Jordi|||0000-0003-1213-3639
Magneto-ionics allows for tunable control of magnetism by voltage-driven transport of ions, traditionally oxygen or lithium and, more recently, hydrogen, fluorine, or nitrogen. Here, magneto-ionic effects in single-layer iron nitride films are demonstrated, and their performance is evaluated at room temperature and compared with previously studied cobalt nitrides. Iron nitrides require increased activation energy and, under high bias, exhibit more modest rates of magneto-ionic motion than cobalt nitrides. Ab initio calculations reveal that, based on the atomic bonding strength, the critical field required to induce nitrogen-ion motion is higher in iron nitrides (≈6.6 V nm -1) than in cobalt nitrides (≈5.3 V nm -1). Nonetheless, under large bias (i.e., well above the magneto-ionic onset and, thus, when magneto-ionics is fully activated), iron nitride films exhibit enhanced coercivity and larger generated saturation magnetization, surpassing many of the features of cobalt nitrides. The microstructural effects responsible for these enhanced magneto-ionic effects are discussed. These results open up the potential integration of magneto-ionics in existing nitride semiconductor materials in view of advanced memory system architectures.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electrochemically Fabricated Surface-Mesostructured CuNi Bimetallic Catalysts for Hydrogen Production in Alkaline Media

  • Bai, Jingyuan
  • Zhang, Jin
  • Eiler, Konrad|||0000-0001-8648-6395
  • Yang, Zhou
  • Fan, Longyi
  • Yang, Dalong
  • Zhang, Meilin
  • Hou, Yupu|||0000-0003-0864-3847
  • Guan, Renguo
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
Ni-based bimetallic films with 20 at.% and 45 at.% Cu and mesostructured surfaces were prepared by electrodeposition from an aqueous solution containing micelles of P123 triblock copolymer serving as a structure-directing agent. The pH value of the electrolytic solution had a key effect on both the resulting Cu/Ni ratio and the surface topology. The catalytic activity of the CuNi films toward hydrogen evolution reaction was investigated by cyclic voltammetry (CV) in 1 M KOH electrolyte at room temperature. The CuNi film showed the highest activity (even higher than that of a non-mesostructured pure Ni film), which was attributed to the Ni content at the utmost surface, as demonstrated by CV studies, as well as the presence of a highly corrugated surface.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A comparative study of the influence of the deposition technique (electrodeposition versus sputtering) on the properties of nanostructured Fe70 Pd30 films

  • Cialone, Matteo|||0000-0002-3018-2787
  • Fernandez-Barcia, Monica|||0000-0001-6808-6267
  • Celegato, Federica|||0000-0002-7076-6234
  • Coisson, Marco|||0000-0002-2978-7615
  • Barrera, Gabriele|||0000-0002-3174-8092
  • Uhlemann, Margitta|||0000-0002-2764-0329
  • Gebert, Annett|||0000-0003-2748-3850
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
  • Rizzi, Paola|||0000-0002-3977-2839
  • Tiberto, Paola|||0000-0002-7409-2281
Sputtering and electrodeposition are among the most widespread techniques for metallic thin film deposition. Since these techniques operate under different principles, the resulting films typically show different microstructures even when the chemical composition is kept fixed. In this work, films of FePd were produced in a thickness range between 30 and 600 nm, using both electrodeposition and sputtering. The electrodeposited films were deposited under potentiostatic regime from an ammonia sulfosalicylic acid-based aqueous solution. Meanwhile, the sputtered films were deposited from a composite target in radio frequency regime. Both approaches were proven to yield high quality and homogenous films. However, their crystallographic structure was different. Although all films were polycrystalline and Fe and Pd formed a solid solution with a body-centered cubic structure, a palladium hydride phase was additionally detected in the electrodeposited films. The occurrence of this phase induced internal stress in the films, thereby influencing their magnetic properties. In particular, the thickest electrodeposited FePd films showed out-of-plane magnetic anisotropy, whereas the magnetization easy axis lied in the film plane for all the sputtered films. The domain pattern of the electrodeposited films was investigated by magnetic force microscopy. Finally, nanoindentation studies highlighted the high quality of both the sputtered and electrodeposited films, the former exhibiting higher reduced Young's modulus and Berkovich hardness values.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Voltage control of magnetism with magneto-ionic approaches, beyond voltage-driven oxygen ion migration

  • de Rojas, Julius|||0000-0002-1206-4744
  • Quintana, Alberto|||0000-0002-9813-735X
  • Rius, Gemma|||0000-0003-0552-1043
  • Stefani, Christina|||0000-0002-8818-075X
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Costa-Krämer, José L.|||0000-0002-7664-2195
  • Menéndez, Enric|||0000-0003-3809-2863
  • Sort, Jordi|||0000-0003-1213-3639
Magneto-ionics is an emerging field in materials science where voltage is used as an energy-efficient means to tune magnetic properties, such as magnetization, coercive field, or exchange bias, by voltage-driven ion transport. We first discuss the emergence of magneto-ionics in the last decade, its core aspects, and key avenues of research. We also highlight recent progress in materials and approaches made during the past few years. We then focus on the "structural-ion"approach as developed in our research group in which the mobile ions are already present in the target material and discuss its potential advantages and challenges. Particular emphasis is given to the energetic and structural benefits of using nitrogen as the mobile ion, as well as on the unique manner in which ionic motion occurs in CoN and FeN systems. Extensions into patterned systems and textures to generate imprinted magnetic structures are also presented. Finally, we comment on the prospects and future directions of magneto-ionics and its potential for practical realizations in emerging fields, such as neuromorphic computing, magnetic random-access memory, or micro- and nano-electromechanical systems.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Frequency-dependent stimulated and post-stimulated voltage control of magnetism in transition metal nitrides, towards brain-inspired magneto-ionics

  • Tan, Zhengwei|||0000-0003-4142-0637
  • de Rojas, Julius|||0000-0002-1206-4744
  • Martins, Sofia|||0000-0002-1801-1651
  • Lopeandia, Aitor|||0000-0003-0566-8299
  • Quintana, Alberto|||0000-0002-9813-735X
  • Cialone, Matteo|||0000-0002-3018-2787
  • Herrero-Martín, Javier|||0000-0003-1986-8128
  • Meersschaut, Johan|||0000-0003-2467-1784
  • Vantomme, André|||0000-0001-9158-6534
  • Costa-Krämer, José L.|||0000-0002-7664-2195
  • Sort, Jordi|||0000-0003-1213-3639
  • Menéndez, Enric|||0000-0003-3809-2863
Magneto-ionics, which deals with the change of magnetic properties through voltage-driven ion migration, is expected to be one of the emerging technologies to develop energy-efficient spintronics. While a precise modulation of magnetism is achieved when voltage is applied, much more uncontrolled is the spontaneous evolution of magneto-ionic systems upon removing the electric stimuli (i.e., post-stimulated behavior). Here, we demonstrate a voltage-controllable N ion accumulation effect at the outer surface of CoN films adjacent to a liquid electrolyte, which allows for the control of magneto-ionic properties both during and after voltage pulse actuation (i.e., stimulated and post-stimulated behavior, respectively). This effect, which takes place when the CoN film thickness is below 50 nm and the voltage pulse frequency is at least 100 Hz, is based on the trade-off between generation (voltage ON) and partial depletion (voltage OFF) of ferromagnetism in CoN by magneto-ionics. This novel effect may open opportunities for new neuromorphic computing functions, such as post-stimulated neural learning under deep sleep.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Lightweight macroporous Co-Pt electrodeposited films with semi-hard-magnetic properties

  • Navarro Senent, Cristina Maria|||0000-0002-7757-0357
  • Eiler, Konrad|||0000-0001-8648-6395
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
Macroporous, partially L10-ordered Co-Pt films with nearly equiatomic composition were successfully synthesized by electrodeposition from an aqueous sulfate-chloride electrolyte on colloidal crystal-templated substrates, followed by annealing in vacuum. The colloids deposited on the substrate consisted of amidine-functionalized polystyrene spheres of 215 ± 13 nm in diameter, which were self-assembled by electrophoresis. As-deposited Co-Pt films obtained after the removal of the spheres showed a highly-packed arrangement of macropores. Structurally, the films showed the A1-disordered face-centered cubic (fcc) Co-Pt solid solution, accompanied by small amounts of fcc/hexagonal close-packed (hcp)-Co. Upon annealing at 600 °C, the A1-disordered phase partly transformed into the L10-ordered (face-centered tetragonal, fct) phase. As a result, the coercivity significantly increased from 148 Oe to 1328 Oe. Importantly, the porosity of the films was preserved after annealing. Optimum annealing temperature and time were selected on the basis of a prior parametric study with electroplated dense counterparts. This work demonstrates that the combination of colloidal crystal templating and electrodeposition is a very convenient pathway towards lightweight semi-hard magnets with potential technological applications in automotive and aerospace industries, portable sensors or spectrometers, magnetic levitation systems, or magnetoelectric devices, among others.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Structure, mechanical properties and nanocrystallization of (FeCoCrNi)-(B,Si) high-entropy metallic glasses

  • Panahi, S. Leila|||0000-0003-0140-726X
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Popescu, Catalin|||0000-0001-6613-4739
  • Pineda, Eloi|||0000-0002-1871-3848
  • Sort, Jordi|||0000-0003-1213-3639
  • Bruna, Pere|||0000-0002-7411-1278
New high-entropy metallic glasses were produced by adding B and Si to the Fe25Co25Cr25Ni25 high entropy alloy. Extremely hard materials were obtained by inducing structural relaxation and nanocrystallization in the original amorphous metals. In this work we study the effects of the composition and annealing treatments on the structure and the mechanical properties. The changes in structure during heating treatments were determined by in situ synchrotron X-ray diffraction and the mechanical behavior was studied by nanoindentation. The mechanical properties of the as-quenched glasses were tuned through the annealing treatments, obtaining amorphous/nanocrystalline composites appropriate for highly demanding, wear resistance applications. The relative amount of B and Si is shown to determine the main nanocrystalline phase, FCC or BCC, which has a key influence on the mechanical properties.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Magneto-ionic suppression of magnetic vortices

  • Chen, Yu|||0000-0001-9890-9551
  • Nicolenco, Aliona|||0000-0003-4624-2163
  • Molet, Pau|||0000-0003-3693-0309
  • Mihi, Agustín|||0000-0003-3821-7881
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Magneto-ionics refers to the non-volatile control of the magnetic properties of materials by voltage-driven ion migration. This phenomenon constitutes one of the most important magnetoelectric mechanisms and, so far, it has been employed to modify the magnetic easy axis of thin films, their coercivity or their net magnetization. Herein, a novel magneto-ionic effect is demonstrated: the transition from vortex to coherent rotation states, caused by voltage-induced ion motion, in arrays of patterned nanopillars. Electrolyte-gated Co/GdOx bilayered nanopillars are chosen as a model system. Electron microscopy observations reveal that, upon voltage application, oxygen ions diffuse from GdOx to Co, resulting in the development of paramagnetic oxide phases (CoOx) along sporadic diffusion channels. This breaks up the initial magnetization configuration of the ferromagnetic pillars (i.e. vortex states) and leads to the formation of small ferromagnetic nanoclusters, embedded in the CoOx matrix, which behave as single-domain nanoparticles. As a result, a decrease in the net magnetic moment is observed, together with a drastic change in the shape of the hysteresis loop. Micromagnetic simulations are used to interpret these findings. These results pave the way towards a new potential application of magnetoelectricity: the magneto-ionic control of magnetic vortex states.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Exploiting random phenomena in magnetic materials for data security, logics, and neuromorphic computing, Challenges and prospects

  • Navau, Carles|||0000-0003-4763-5305
  • Sort, Jordi|||0000-0003-1213-3639
Random phenomena are ubiquitous in magnetism. They include, for example: the random orientation of magnetization in an assembly of non-interacting isotropic magnets; arbitrary maze domain patterns in magnetic multilayers with out-of-plane anisotropy, random polarization, and chirality of an array of magnetic vortices; or Brownian skyrmion motion, among others. Usually, for memory applications, randomness needs to be avoided to reduce noise and enhance stability and endurance. However, these uncontrolled magnetic effects, especially when incorporated in magnetic random-access memories, offer a wide range of new opportunities in, e.g., stochastic computing, the generation of true random numbers, or physical unclonable functions for data security. Partial control of randomness leads to tunable probabilistic bits, which are of interest for neuromorphic computing and for new logic paradigms, as a first step toward quantum computing. In this Perspective, we present and analyze typical materials that exhibit stochastic magnetic phenomena and we show some examples of emerging applications. The current challenges in terms of material development, as well as new strategies to tune stochasticity, enhance energy efficiency, and improve operation speeds are discussed, aiming to provide new prospects and opportunities in this compelling research field.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Mechanical, magnetic and magnetostrictive properties of porous Fe-Ga films prepared by electrodeposition

  • Nicolenco, Aliona|||0000-0003-4624-2163
  • Chen, Yu|||0000-0001-9890-9551
  • Tsyntsaru, Natalia|||0000-0002-9813-2460
  • Cesiulis, Henrikas|||0000-0002-5077-7884
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Magnetostriction, known as the ability of magnetic materials to expand or contract in response to magnetic field, is a key property of Fe-Ga alloys exploited in various types of transducers. Usually, thin films of Fe-Ga deposited on rigid substrates suffer from a clamping effect that hinders the propagation of strain. Herein, Fe-Ga films with macroporous, not fully constrained, geometry are prepared by electrodeposition on metallized silicon substrates templated with sub-micrometer-sized polystyrene spheres. For comparison, fully-dense and inherently nanoporous films are prepared by sputtering and electrodeposition, respectively. The electrodeposition mechanism is discussed in terms of electrochemically active species distribution and partial current densities. The composition of the Fe-Ga films has been tuned (2-40 at.% Ga) by varying the electrodeposition parameters. A complete assessment of the nanomechanical and magnetic properties of the films with variable composition and porosity has been performed for an optimized performance. The magnetostriction has been studied by X-ray diffraction applying an in-situ magnetic field. The results demonstrate a larger magnetic-field-induced crystal deformation in templated (macroporous) films compared to the non-templated and fully-dense counterparts. The observed effects in porous Fe-Ga films are very appealing for the design of various strain-engineered nanomaterials, e.g., energy transducers or magnetoelectric composites.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Voltage-driven strain-mediated modulation of exchange bias in Ir20Mn80/Fe80Ga20/Ta/<011

  • Demirci, Erdem|||0000-0001-5626-5292
  • de Rojas, Julius|||0000-0002-1206-4744
  • Quintana, Alberto|||0000-0002-9813-735X
  • Fina, Ignasi|||0000-0003-4182-6194
  • Menéndez, Enric|||0000-0003-3809-2863
  • Sort, Jordi|||0000-0003-1213-3639
Manipulation of exchange bias with electric field is appealing to boost energy efficiency in spintronic devices. Here, this effect is shown at room temperature in Ir20Mn80/Fe80Ga20/Ta layers grown onto ⟨011⟩-oriented PMN-32PT single crystals. After magnetic field-cooling (FC) along the [01-1] and [100] in-plane directions of PMN-32PT and upon allowing the system to relax through consecutive hysteresis loops (training effect), the exchange bias field (HEB) is measured under the action of voltage (out-of-plane poling). Depending on the applied voltage (magnitude and sign), HEB can either increase or decrease with respect to its value at 0 V. The relative variations of HEB are 24% and 5.5% after FC along the [01-1] and [100] directions, respectively. These results stem from strain-mediated magnetoelectric coupling. The applied electric field causes changes in the coercivity and the squareness ratio of the films, suggesting a reorientation of the effective magnetic easy axis in Fe80Ga20. However, larger HEB values are observed when the squareness ratio is lower. It is claimed that the effect of voltage is equivalent to an in-plane component of an applied magnetic field oriented perpendicular to the cooling field direction. Perpendicular in-plane magnetic fields have been shown to induce an increase in exchange bias in some ferromagnetic/antiferromagnetic systems due to partial recovery of the untrained antiferromagnetic state. Remarkably, here, this effect is directly induced with voltage, therefore enhancing energy efficiency.