Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 243
Encontrada(s) 3 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Preparation of Tremorine and Gemini Surfactant Precursors with Cationic Ethynyl-Bridged Digold Catalysts

  • Grirrane, Abdessamad|||0000-0001-5388-3554
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Alvarez-González, Eleuterio
[EN] Tremorine and precursors of gemini surfactants were synthesised in a one-pot, three-step, double-catalytic A3 coupling reaction and characterised by structural and spectroscopic methods. The cationic [Au-I(L1)]SbF6 complex is a more active catalyst compared to neutral L2- and L3-Au-I bis(trifluoromethanesulfonyl) imidate complexes (L1, L2= Buchwald-type biaryl phosphane; L3= triphenylphosphine) in promoting the double A(3) coupling of ethynyltrimethylsilane, secondary amines (cyclic, aliphatic, or aromatic) and formaldehyde. The solvent influences the catalytic performance by desilylation of silyl acetylene or deactivation of the catalyst by a halide anion. Acetylide-bridged cationic di-gold(I) L1 and L2 complexes were isolated and characterised by means of single-crystal X-ray structure analysis and their spectroscopic properties. Iodine in the acetylene reagent deactivates the AuI catalyst by formation of the less active iodido-bridged cationic digold(I) L1 complex, which was fully characterised by single-crystal X-ray crystal structure analysis and spectroscopy. The nature of the phosphine ligand of the gold complexes used as catalyst affects the stability and activity of the formed cationic ethynyl-bridged Au-2(I)-L intermediates, isolation of which lends support to the proposed double A(3) coupling mechanism., Financial support by the Spanish Ministry of Economy and Competitiveness (Severo Ochoa and CTQ2015-69153-CO<INF>2</INF>-R1) and Generalidad Valenciana (Prometeo 2013-014) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Metal-Free Photocatalytic Reductive Dehalogenation Using Visible-Light: A Time-Resolved Mechanistic Study

  • Martínez-Haya, Rebeca
  • Miranda Alonso, Miguel Ángel
  • Marín García, Mª Luisa|||0000-0002-9789-8894
[EN] The reductive dehalogenation of organic bromides has been achieved in the presence of riboflavin (RF) as photocatalyst under visible-light irradiation. Specifically, benzyl bromide (2) and -bromoacetophenone (3) were quantitatively converted into toluene and acetophenone, respectively, by using amines as electron donors and iPrOH as hydrogen donor, whereas bromobenzene (1) did not react. The thermodynamics of the reduction of the radical anion of RF were evaluated by using the redox potentials of the species involved: The reaction was found to be thermodynamically exergonic for 2 and 3, but not expected to occur for bromobenzene (1). The viability of the different competing processes on the timescales of the corresponding singlet and triplet RF excited states ((RF)-R-1* and (RF)-R-3*) was analyzed by time-resolved techniques. The quenching of (RF)-R-1* by amines was very efficient, and comparison of the transient absorption spectra recorded in the absence and presence of amines additionally confirmed the efficient redox process between (RF)-R-1* and the amines. Moreover, RF- was quenched by bromides 2 and 3, but not by 1. Thus, a deeper understanding of the overall mechanism of the photocatalytic reductive reaction has been achieved, and the key role of the radical anion of the photocatalyst has been demonstrated., R. M.-H. acknowledges generous support from the Spanish Government (grant SEV-2012-0267). We also thank for support from the Ministerio de Economia y Competitividat (Project CTQ2012-38754-C03-03), the Generalitat Valenciana (Prometeo Program) and the VLC/Campus.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

NOx storage/reduction catalysts based on Mg/Zn/Al/Fe hydrotalcite-like materials

  • Jablonska, Magdalena
  • Chmielarz, Lucjan
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
Mg/Zn/Al/Fe mixed oxides derived from hydrotalcites synthesized by the coprecipitation method were found to be effective catalysts for the NOx storage/reduction (NSR) process. The activity of this material was improved by the addition of a basic metal as potassium and by the incorporation of a metal with significant redox properties as Pd. It seems that palladium favored the NO oxidation to NO2 whilst potassium increased the surface basicity of the catalyst, both improving the NOx storage. This catalyst was hydrothermally stable and showed a similar activity to that obtained with a catalyst derived from Mg/Co/Al hydrotalcites but without the environmental problems related with the use of cobalt., M.J. acknowledges the financial support from the Students and Alumni foundation of the Jagiellonian University "Bratnik". A.E. P. acknowledges the financial support from the Spanish Ministry of Economy and Competitiveness through the Severo Ochoa program (SEV-2012-0267) as well as operating grants Consolider Ingenio Multicat (CSD-2009-00050) and MAT-2012-3856-C02-01. The authors want to thank Pablo Saz and Marta Puche for their collaboration in the experiments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hetero-cycloreversions Mediated by Photoinduced Electron Transfer

  • Pérez-Ruiz, Raúl|||0000-0003-1136-3598
  • Jiménez, M Consuelo|||0000-0002-8057-4316
  • Miranda Alonso, Miguel Ángel
[EN] Discovered more than eight decades ago, the Diels-Alder (DA) cycloaddition (CA) remains one of the most versatile tools in synthetic organic chemistry. Hetero-DA processes are powerful methods for the synthesis of densely functionalized six-membered heterocycles, ubiquitous substructures found in natural products and bioactive compounds. These reactions frequently employ azadienes and oxadienes, but only a few groups have reported DA processes with thiadienes. The electron transfer (ET) version of the DA reaction, though less investigated, has emerged as a subject of increasing interest. In the last two decades, researchers have paid closer attention to radical ionic hetero-cycloreversions, mainly in connection with their possible involvement in the repair of pyrimidine(6-4)pyrimidone photolesions in DNA by photolyases. In biological systems, these reactions likely occur through a reductive photosensitization mechanism. In addition, photooxidation can lead to cycloreversion (CR) reactions, and researchers can exploit this strategy for DNA repair therapies. In this Account, we discuss electron-transfer (ET) mediated hetero-CR reactions. We focus on the oxidative and reductive ET splitting of oxetanes, azetidines, and thietanes. Photoinduced electron transfer facilitates the splitting of a variety of four-membered heterocycles. In this context, researchers have commonly examined oxetanes, both experimentally and theoretically. Although a few studies have reported the cycloreversion of azetidines and thietanes carried out under electron transfer conditions, the number of examples remains limited. In general, the cleavage of the ionized four-membered rings appears to occur via a nonconcerted two-step mechanism. The trapping of the intermediate 1,4-radical ions and transient absorption spectroscopy data support this hypothesis, and it explains the observed loss of stereochemistry in the products. In the initial step, either C-C or C-X bond breaking may occur, and the preferred route depends on the substitution pattern of the ring, the type of heteroatom, and various experimental conditions. To better accommodate spin and charge, C-X cleavage happens more frequently, especially in the radical anionic version of the reaction. The addition or withdrawal of a single electron provides a new complementary synthetic strategy to activate hetero-cycloreversions. Despite its potential, this strategy remains largely unexplored. However, it offers a useful method to achieve C=X/olefin metathesis or, upon ring expansion, to construct six-membered heterocyclic rings., Financial support from the Spanish Government (Grants CTQ2010-14882, SEV2012-0267, and JCI-2010-06204) and the Generalitat Valenciana (Prometeo II/2013/005) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Chemical stability in H2S and creep characterization of the mixed protonic conductor Nd5.5WO11.25-d

  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Stournari, V.
  • Malzbender, J.
  • Haas-Santo, K.
  • Dittmeyer, Roland
[EN] The integration of hydrogen permeable membranes in catalytic membrane reactors for thermodynamically limited reactions such as steam methane reforming can improve the per-pass yield and simultaneously produce a high-purity H-2 stream. Mixed protonic electronic materials based membranes are potential candidates for these applications due to their elevated temperature operation, good stability and potentially low cost. However, a specific mechanical behavior and stability under harsh atmospheres is needed to guarantee sufficient lifetime in real-world processes. This work presents the mechanical characterization and a study of the chemical stability under H2S containing atmospheres for the compound Nd5.5WO11.(25-8) Mechanical characterization was performed by micro indentation and creep measurements in air. Chemical stability was evaluated by XRD and SEM and the effect of the H2S on the transport properties was evaluated by impedance spectroscopy. Under H2S atmospheres, the total conductivity increases at 600 degrees C and 700 degrees C. The conductivity increase is attributed to the incorporation of S2- ions in oxide-ion sublattice. (C) 2018 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved., This work was financially supported by the Spanish Government (ENE2014-57651-R and SEV-2012-0267 grants). Authors would like to thank to U. Gerhards, M. Fabuel, T. Osipova and Dr. Wesel for WDS and SEM analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cu-zeolite catalysts for NOx removal by selective catalytic reduction with NH3 and coupled to NO storage/reduction monolith in diesel engine exhaust aftertreatment systems

  • De-La-Torre, Unai
  • Pereda-Ayo, Benat
  • González Velasco, Juan Ramón
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Coupled NSR-SCR systems comprising a Pt-BaO/Al2O3 NSR monolith and Cu/CHA, Cu/ZSM-5 or Cu/BETA SCR catalysts are prepared and tested for NOx removal from diesel and lean burn engines exhaust gases. The Cu/zeolite catalysts are characterized by ICP-AES, XRD, N-2 adsorption-desorption, NH3-TPD and H-2-TPR. The physico-chemical characteristics of fresh catalysts and aged under 5% steam/Ar at 750 degrees C for 16 h and are compared, resulting in the Cu/CHA with much higher hydrothermal resistance to the loss of textural and structural properties. The single-SCR, single-NSR and coupled NSR-SCR catalytic performance is studied including the conversion of NO and NH3, slip of NH3, and N2O and NO2 yields. Cu/CHA presents the SCR wider temperature window, eventually 100%NO conversion from 220 to 380 degrees C, even maintained after severe aging. For application in the NSR-SCR technology, the NH3 generated in the NSR catalyst during the rich period is able to achieve higher NO conversion reducing significantly the slip of NH3 (negligible at 200 degrees C and above), very few amount of N2O at any temperature, and small production of NO2 only at higher temperatures. This improvement of activity and selectivity is particularly enhanced with the coupled NSR-Cu/CHA system, which is also maintained when the catalyst is deposited on the cordierite monolith substrate, as in the case of real application. (C) 2016 Published by Elsevier B.V., The authors wish to acknowledge the financial support by the Spanish Economy and Competitiveness Ministry [CTQ2012-32899; MAT2012-3716, and "Severo Ochoa" (SEV 2012-0267)], the Basque Government (IT657-013), and the European Union (SynCat-Match project; ERC-AdG-2014-671093). One of the authors (UDLT) acknowledge to the Basque Government for the PhD Research Grant (BFI-2010-330).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structure-reactivity correlations in Vanadium containing catalysts for the one-pot glycerol oxidehydration to acrylic acid

  • Chieregato, Alessandro
  • Bandinelli, Claudia
  • Puzzo, Francesco
  • Basile, Francesco
  • Cavani, Fabrizio
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] The design of suitable catalysts for the one-pot conversion of glycerol into acrylic acid (AA) is a complex matter, as only fine-tuning of the redox and acid properties makes it possible to obtain significant yields of AA. However, fundamental understanding behind the catalytic phenomenon is still unclear. Structure-reactivity correlations are clearly behind these results, and acid sites are involved in the dehydration of glycerol into acrolein with vanadium as the main (or only) redox element. For the first time, we propose an in-depth study to shed light on the molecular-level relations behind the overall catalytic results shown by several types of V-containing catalysts. Different multifunctional catalysts were synthesized, characterized (>X-ray diffraction, X-ray photoelectron spectroscopy, Raman spectroscopy, temperature-programmed reduction, and temperature-programmed desorption of ammonia), and tested in a flow reactor. Combining the obtained results with those acquired from an in situ FTIR spectroscopy study with acrolein (a reaction intermediate), it was possible to draw conclusions on the role played by the various physicochemical features of the different oxides in terms of the adsorption, surface reactions, and desorption of the reagents and reaction products., The Instituto de Tecnologia Quimica thanks the Spanish Government-MINECO projects (CTQ2015-68951-C3-1-R and SEV-2012-0267). CIRI Energia e Ambiente (University of Bologna) is acknowledged for a Ph.D. grant to A.C. Consorzio INSTM (Firenze) is acknowledged for a Ph.D. grant to C.B.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Catalytic cracking performance of alkaline-treated zeolite Beta in the terms of acid sites properties and their accessibility

  • Tarach, K.
  • Gora-Marek, K.
  • Tekla, J.
  • Brylewska, K.
  • Datka, J.
  • Mlekodaj, K.
  • Makowski, W.
  • Igualada López, María Cristina
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • Rey Garcia, Fernando|||0000-0003-3227-5669
The zeolite Beta is considered as a promising additive for FCC catalyst in diesel oil production. In this article, it is shown that hierarchical zeolite Beta obtained by an optimized desilication procedure increases diesel and propylene yields during gas oil cracking reaction. The alkaline treatment of zeolite Beta (Si/Al = 22) by desilication with NaOH and NaOH&TBAOH was investigated. The catalytic performance improvement of desilicated zeolite Beta has been rationalized by deep characterization of the samples including X-ray diffraction, low-temperature adsorption of nitrogen, solid-state 29Si MAS NMR and IR studies of acidity. Finally, the catalytic performance of the zeolites Beta was evaluated in the cracking of n-decane, 1,3,5-tri-iso-propylbenzene, and vacuum gas oil. It was found that desilication with NaOH&TBAOH ensures the more uniform intracrystalline mesoporosity with the formation of narrower mesopores, while preserving full crystallinity resulting in catalysts with the most appropriated acidity and then with better catalytic performance., Also, M.C.I.L., J.M.T. and F.R. thank financial support from the Spanish Ministry of Economy and Competitiveness through the Severo Ochoa program (SEV-2012-0267) as well as operating grants Consolider Ingenio Multicat (CSD-2009-00050) and MAT-2012-3856-0O2-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mesoporous nanocomposite sensors based on Sn1-xCexO2-&amp, #948, metastable solid solution with high percentage of Ce3+ valence state for selective detection of H2 and CO

  • Somacescu, Simona
  • Osiceanu, Petre
  • Calderon-Moreno, Jose Maria
  • Navarrete Algaba, Laura
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Mesoporous nanocomposite materials based on Sn1-xCexO2-delta (x = 0.1; 0.2; 0.3) solid solution were synthesized by a hydrothermal synthesis route using CTAB-ionic surfactant-as template, for testing their sensing properties for selective detection of H-2 and CO. The samples were investigated with respect to their structural composition, nanocrystallitesizes, morphology, texture, molecular and macroscopic surface properties by XRD, Raman, SEM-EDX, HRTEM and STEM-EDX mapping, BET analysis and XPS, as a function of the ceria content incorporated in the mentioned solid solution. A high percentage of Ce3+ valence state (similar to 40%) was determined by XPS for the Sn0.9Ce0.1O2-delta surface sample. A clear morphology of dispersed nanoparticles, with uniform grain sizes around 5 nm was revealed by HRTEM, while the organization of the nanoparticles in a mesoporous architecture was confirmed by BET analysis. Gas sensing investigations revealed the role of the mesoporous architectures, solid solution phases, Ce3+ oxidation state relative concentration on the increase in sensitivity for the selective detection of H-2 and CO. (C) 2013 Elsevier Inc. All rights reserved., S. Somacescu acknowledges the Sectorial Operational Programme Human Resources Development (SOP HRD) financed from the European Social Fund and by the Romanian Government under the contract number POSDRU/89/1.5/S/63700. Further financial support by the Spanish Ministry for Science and Innovation (ENE2011-24761, CSD-2009-0050 and SEV-2012-0267), EU (ERDF) and Romanian Government infrastructure POS-CCE O 2.2.1 project INFRANANOCHEM - no. 19/2009 are kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photobiocatalytic chemistry of oxidoreductases using water as the electron donor

  • Mifsud Grau, María
  • Gargiulo, Serena
  • Arends, Isabel W. C. E.
  • Hollmann, Frank
  • Iborra Chornet, Sara|||0000-0003-1758-5095
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] To date, water has been poorly studied as the sacrificial electron donor for biocatalytic redox reactions using isolated enzymes. Here we demonstrate that water can also be turned into a sacrificial electron donor to promote biocatalytic redox reactions. The thermodynamic driving force required for water oxidation is obtained from UV and visible light by means of simple titanium dioxide-based photocatalysts. The electrons liberated in this process are delivered to an oxidoreductase by simple flavin redox mediators. Overall, the feasibility of photobiocatalytic, water-driven bioredox reactions is demonstrated., Financial support from the Spanish Science and Innovation Ministry (Consolider Ingenio 2010-MULTICAT CSD 2009-00050, Subprograma de apoyo a Centros y Universidades de Excelencia Severo Ochoa SEV 2012 0267). M. M. acknowledges the Spanish Science and Innovation Ministry for a 'Juan de la Cierva' postdoctoral contract. S. G. acknowledges the European Union Marie Curie Programme (ITN 'Biotrains', Grant Agreement No. 238531).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cu and Fe modified derivatives of 2D MWW-type zeolites (MCM-22, ITQ-2 and MCM-36) as new catalysts for DeNOx process

  • Rutkowska, Malgorzata
  • Chmielarz, Lucjan
  • Díaz, Urbano|||0000-0003-1472-8724
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
Zeolites with MWW topology (MCM-22, ITQ-2, and MCM-36) exchanged with copper and iron were studied as catalysts for selective catalytic reduction of NO with ammonia. It was shown that delamination and pillaring of layered MCM-22 zeolite resulted in the formation of ITQ-2 and MCM-36, respectively. Both these materials were characterized by MWW topology and significant contribution of mesopores. In a series of the zeolite based catalyst the most promising results in a process of selective catalytic reduction of NO with ammonia were obtained for the copper doped samples (Cu-MCM-22 and Cu-ITQ-2), however catalytic performance of the studied catalytic systems strongly depends on type, content and form of deposited transition metal species. Moreover, both these catalysts were found to be catalytically stable in the DeNOx process after hydrothermal treatment., U.D. and A.E.P. thank for the financial support to Spanish Government by Consolider-Ingenio MULTICAT CSD2009-00050, MAT2011-29020-0O2-01 and Severo Ochoa Excellence Program SEV-2012-0267.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Host-Guest and Guest-Guest Interactions of P- and N-Containing Structure Directing Agents Entrapped inside MFI-Type Zeolite by Multinuclear NMR Spectroscopy

  • Martinez-Ortigosa, Joaquin
  • Simancas-Coloma, Jorge
  • Gaveau, Philippe
  • Alonso, B.
  • Vidal Moya, José Alejandro
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
[EN] Highly crystalline pure silica MFI zeolites have been synthesized using tetraethylammonium (TEA), tetraethylphosphonium (TEP), or a mixture of both cations in different proportions as organic structure directing agents (OSDAs). The zeolites have been deeply characterized in order to get insight about the guest guest interactions involving the OSDAs and the guest host interactions involving the OSDAs and the inorganic framework, as well as the main features of the resulting materials. The results show that the average size of the MFI crystals decreases when TEP is present within the zeolite and that this cation is homogeneously distributed throughout the crystallites. The multinuclear NMR investigation (H-1, C-13, N-14, F-19, Si-29, P-31) indicates that TEP interacts with the zeolite host creating higher heterogeneity of the SiO4 crystallographic sites and a diminution on the mobility of fluorine atoms incorporated into the zeolite. Moreover, the presence of TEP influences the dynamics of the nitrogen atoms of the TEA molecules, and 2D heteronuclear correlation experiments give evidence on the spatial proximity of the TEA and TEP molecules in the MFI zeolites. Then, it is concluded that TEA and TEP are intimately mixed within the zeolite voids of the pure silica MFI samples synthesized by the dual template route., Financial support by the MINECO of Spain through the Severo Ochoa (SEV-2016-0683) and RTI2018-101784-B-I00 projects is gratefully acknowledged. The authors also thank the Microscopy Service of the Universitat Politecnica de Valencia for its assistance in microscopy characterization (FESEM equipment preparation). J.M.-O. (SEV-2012-0267-02) is grateful to the Severo Ochoa Program for a predoctoral fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Catalytic properties of pristine and defect-engineered Zr-MOF-808 metal organic frameworks

  • Mautschke, Hans-Hilmar
  • Drache, F.
  • Senkovska, I.
  • Kaskel, S.
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] Various defect-engineered Zr-trimesate MOF-808 compounds (DE-MOF-808) have been prepared by mixing the tricarboxylate ligands with dicarboxylate ligands; viz. isophthalate, pyridine-3,5-dicarboxylate, 5-hydroxy-isophthalate, or 5-amino-isophthalate. The resulting mixed-ligand compounds, MOF-808-X (X = IP, Pydc, OH or NH2) were all found to be highly crystalline and isostructural to the unmodified MOF-808. Pristine MOF-808 showed better catalytic performance than a UiO-66 reference compound for the Meerwein-Ponndorf-Verley (MPV) reduction of carbonyl compounds. This was attributed to a higher availability of coordinatively unsaturated Zr4+ sites (cus) in MOF-808 upon removal of formate ions. Meanwhile, cus in UiO-66 are only located at defect sites and are thus much less abundant. Further improvement of the catalytic activity of defect-engineered MOF-808-IP and MOF-808-Pydc was observed, which may be related with the occurrence of less crowded Zr4+ sites in DE-MOF-808. The wider pore structure of MOF-808 with respect to UiO-66 compounds translates into a sharp improvement of the activity for the MPV reduction of bulky substrates, as shown for estrone reduction to estradiol. Interestingly, MOF-808 produces a notable diastereoselectivity towards the elusive 17--hydroxy estradiol., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 641887 (project acronym: DEFNET). Financial support from the Spanish Ministry of Economy and Competitiveness (program Severo Ochoa SEV20120267), the Spanish Ministry of Science and Innovation (project MAT2014-52085-C2-1-P), and the German Research Foundation (project KA 1698/19-1) is also gratefully acknowledged. The Microscopy Service of the Universitat Politecnica de Valencia are gratefully acknowledged for the SEM images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The MOF-driven synthesis of supported palladium clusters with catalytic activity for carbene-mediated chemistry

  • Fortea Perez, Francisco
  • Ferrando-Soria, Jesus
  • Manuel -Herrera, Juan
  • Osadchii, Dmitrii
  • Gascon, Jorge
  • Armentano, Donatella
  • Mon-Conejero, Marta|||0000-0002-1983-1096
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Leyva Perez, Antonio|||0000-0003-1063-5811
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The development of catalysts able to assist industrially important chemical processes is a topic of high importance. In view of the catalytic capabilities of small metal clusters, research efforts are being focused on the synthesis of novel catalysts bearing such active sites. Here we report a heterogeneous catalyst consisting of Pd4 clusters with mixed-valence 0/+1 oxidation states, stabilized and homogeneously organized within the walls of a metal¿organic framework (MOF). The resulting solid catalyst outperforms state-of-the-art metal catalysts in carbene-mediated reactions of diazoacetates, with high yields (>90%) and turnover numbers (up to 100,000). In addition, the MOF-supported Pd4 clusters retain their catalytic activity in repeated batch and flow reactions (>20 cycles). Our findings demonstrate how this synthetic approach may now instruct the future design of heterogeneous catalysts with advantageous reaction capabilities for other important processes., This work was supported by the MINECO (Spain) (Projects CTQ2013-46362-P, CTQ2014-56312-P and Excellence Units 'Severo Ochoa' and 'Maria de Maeztu' SEV-2012-0267 and MDM-2015-0538), the Generalitat Valenciana (Spain) (Project PROMETEOII/2014/070), the Ministero dell'Istruzione, dell'Universita e della Ricerca (Italy) and the Junta de Andalucia (FQM-195 and P11-FQM-7756). M. M. thanks the MINECO for a predoctoral contract. Thanks are also extended to the Ramon y Cajal Program and the 'Convocatoria 2015 de Ayudas Fundacion BBVA a Investigadores y Creadores Culturales' (E.P., A.L.-P. and J.F.-S.). J.G. acknowledge the financial support of the European Research Council under the European Union's Seventh Framework Programme (FP/2007-2013)/ERC Grant Agreement no. 335746, CrystEng-MOF-MMM.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of a hybrid Pd-0/Pd-carbide/carbon catalyst material with high for reactions

  • Garcia-Ortiz, Andrea
  • Cored-Bandrés, Jorge
  • Ruano-Sánchez, Daniel
  • Pérez-Dieste, Virginia
  • Vidal, Juan D|||0000-0002-6862-6443
  • Iborra Chornet, Sara|||0000-0003-1758-5095
  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] We present a highly selective and active Pd carbon catalyst prepared by an easy hydrothermal synthesis method. This synthetic procedure allows the stabilization under mild conditions of interstitial carbon atoms on the surface of a Pd-0 carbon catalyst. The so formed Pd carbide phase appears on the upper surface layers of the Pd carbon catalyst, as demonstrated by X-ray photoelectron depth profile analysis using variable synchrotron X-ray energies. The presence of carbon in the palladium carbide species modifies the electronic state of surface Pd atoms, resulting in more electron positive Pd species (Pdd+). This influences the adsorption of reactants and reaction intermediates during the hydrogenation of alkynes, dienes and imines, resulting in high selectivities at practically 100% conversion. (C) 2020 Elsevier Inc. All rights reserved., The research leading to these results has received funding from the Spanish Ministry of Science, Innovation and Universities through "Severo Ochoa"Excellence Programme (SEV-2016-0683) and the PGC2018-097277-B-100 project. The authors also thank the Microscopy Service of UPV for kind help on measurements. A. Garcia-Ortiz thanks "Severo Ochoa" Programme (SEV-2016-0683) for a predoctoral fellowship. J. Cored thanks the Spanish Government (MINECO) for a "Severo Ochoa"grant (BES-2015-075748). D. R. thanks European Research Council project SYNCATMATCH (671093). The NAP-XPS experiments were performed at the NAPP branch of the CIRCE beamline at the ALBA Synchrotron with the collaboration of ALBA staff.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Direct Conversion of Cellulose into Alkyl Glycoside Surfactants

  • Puga, Alberto V.
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The one-step production of biodegradable alkyl glycoside (1-dodecyl mono- and oligoglucoside) surfactants from cellulose has been achieved by direct alcoholysis in fatty alcohol media under BrOnsted acid catalysis at near-ambient pressure. The fatty alcohol serves as both solvent and reagent. Addition of small amounts of water prevents dehydration events and thus minimises product and solvent degradation. Furthermore, high initial cellulose loadings and short thermal cycles enable moderate-to-high conversions and selectivities (up to approximate to 70%), and low solvent-to-product ratios., Financial support from the Spanish Government-MINECO through "Severo Ochoa" (SEV 2012-0267) is acknowledged. AVP also thanks the Spanish Government (Agencia Estatal de Investigacion) and the European Union (European Regional Development Fund) for a grant for young researchers (CTQ2015-74138-JIN, AEI/FEDER/UE).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Preparation, characterization and catalytic behavior for propanepartial oxidation of Ga-promoted MoVTeO catalysts

  • Hernández Morejudo, Selene
  • Massó Ramírez, Amada
  • García-González, Esther
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Two sets of Ga-promoted MoVTeO catalysts were synthesized hydrothermally and heat-treated at 600 degrees C in N-2: (i) materials prepared from gels with Mo/V/Te/Ga atomic ratios of 1/0.60/0.17/x (x=0-0.12) (A-series) and (ii) materials prepared from gels with Mo/V/Te/Ga atomic ratios of 1/0.60-x/0.17/x (x=0.15 or 0.25) (B-series). In addition, a Ga-containing MoVTeO catalyst was also prepared from M1-containing MoVTeO material by impregnation with aqueous solution of gallium and heat-treated at 450 degrees C in N-2. Catalysts were characterized by means of powder XRD, TEM, Raman spectroscopy, NH3-TPD and XPS and tested in the partial oxidation of propane. The results showed that the addition of small amount of gallium significantly increase the selectivity to acrylic acid (AA) at low propane conversion. However, at high propane conversion, the selectivity to AA strongly depends on both the catalyst composition and the gallium incorporation method. The higher selectivity to acrylic acid over Ga-containing MoVTeO catalysts has been related to: (i) structural changes in the M1 phase by the incorporation of Ga3+ into the octahedral structural framework and/or (ii) incorporation of Ga3+ species on the catalyst surface thus modifying catalysts acid properties. (C) 2014 Elsevier B.V. All rights reserved., Financial support from DGICYT in Spain (Project CTQ2012-37925-C03-1 and Program Severo Ochoa SEV-2012-0267) is gratefully acknowledged. EGG acknowledges finantial support through spanish project MAT2010-19837-C06-05 and the ICTS-Microscopia Electronica in Madrid for facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Catalytic Surface Promotion of Composite Cathodes in Protonic Ceramic Fuel Cells

  • Solis Díaz, Cecilia
  • Navarrete Algaba, Laura
  • Bozza, Francesco
  • Bonanos, Nikolaos
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Composite cathodes based on an electronic conductor and a protonic conductor show advantages for protonic ceramic fuel cells. In this work, the performance of a La5.5WO11.25-delta/La0.8Sr0.2MnO3+delta (LWO/LSM) composite cathode in a fuel cell based on an LWO protonic conducting electrolyte is shown and catalytically improved. The limiting processes were first unambiguously associated to surface steps, and the reaction rate was significantly enhanced by 1) tailoring the catalytic activity through electrode surface impregnation with intrinsically catalytic nanoparticles and 2) electrochemical activation of surface species by imposing a net current through the electrode., Funding from the European Union (FP7 Project EFFIPROGrant Agreement 227560 and FP7 Project ELECTRAGrant Agreement 621244) and the Spanish Government (ENE2011-24761 and SEV-2012-0267) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structure-reactivity relationship in isolated Zr sites present in Zr-zeolite and ZrO2 for the Meerwein-Ponndorf-Verley reaction

  • Gonell-Gómez, Francisco|||0000-0002-8658-2878
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The influence of the crystallographic phase of ZrO2 on its catalytic performance in the MPV reduction of cyclohexanone with propan-2-ol has been systematically investigated by combining accurate synthesis procedures, XRD and HRTEM characterization, kinetic measurements and DFT calculations, and compared to that of Zr-beta zeolite. The higher intrinsic activity of monoclinic zirconia as compared to other ZrO2 phases is not due to a lower activation energy for the rate-determining step, but to an adequate distribution of reactant fragments on the catalyst surface, indicating a structure-activity relationship for this reaction when catalyzed by ZrO2 and also by Zr-beta zeolite. Inexpensive and stable ZrO2 catalysts for the MPV reaction have been obtained by controlling the crystallographic phase of the synthesized material., This work has been supported by the Spanish Government through the "Severo Ochoa Program" (SEV 2012-0267). The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. The Red Espanola de Supercomputacion (RES) and Centre de Calcul de la Universitat de Valencia are gratefully acknowledged for computational facilities and technical assistance. F. Gonell is grateful to Ministerio de Educacion, Cultura y Deporte for a PhD grant (AP2010-2748).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancing oxygen permeation through hierarchically-structured perovskite membrane elaborated by freeze-casting

  • Gaudillere, Cyril Christian
  • García Fayos, Julio
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Innovative asymmetric oxygen-transport membrane architectures were prepared by combining freeze-casting and film deposition techniques. Freeze-casting enabled to optimize the gas transport through the support by creating a hierarchical porosity while a dense top-layer of 30 µm was coated over this support by screen printing. The versatility of this technique was demonstrated by preparing highly porous bodies made of fast ionic conductors, e.g. perovskites and doped ceria fluorites, with a large number of applications in catalysis, electrochemistry and gas separation. Permeation tests using an all- La0.6Sr0.4Co0.2Fe0.8O3-d; asymmetric membrane proved the beneficial effect of such porous supports over the O2 fluxes with a maximum value of 6.8 ml.min-1.cm-2 at 1000 ºC, markedly above the results achieved so far with conventional preparation techniques. Gas permeance study through the porous freeze-cast support showed that the particular pore structure allows the gaseous transport resistance to be minimized. The related pressure drop is found to be very low in comparison with conventional porous supports, e.g. tape-cast supports, with for example only 0.59 bar.mm -1 with argon at 800 ºC for an inlet flow of 400 mL.min -1.cm-2. Finally, the stability of the asymmetric membrane has been evaluated under CO 2atmosphere during 48 hours and at 900ºC. The membrane is found to be stable without deactivation nor decrease in the O2 permeation flux., Funding from the Spanish Government (ENE2011-24761 and SEV-2012-0267 grants) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Intensified biobutanol recovery using zeolites with complementary selectivity

  • Van der Perre, Stijn
  • Gelin, Pierre
  • Claessens, Benjamin
  • Martin-Calvo, Ana
  • Saint Remi, Julien Cousin
  • Duerinck, Tim
  • Baron, Gino V.
  • Sánchez, Ledys Yelitza
  • Shang, Jin
  • Singh, Ranjeet
  • Webley, Paul A.
  • Denayer, Joeri F. M.
  • Palomino Roca, Miguel|||0000-0003-2983-1038
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] A vapor phase adsorptive recovery process is proposed as an alternative way to isolate biobutanol from acetone-butanolethanol (ABE) fermentation media, offering several advantages compared to liquid phase separation. The effect of water, which is still present in large quantities in vapor phase, on the adsorption of the organics could be minimized by using hydrophobic zeolites. Shape selective all-silica zeolites CHA and LTA were prepared and evaluated via single component isotherms and breakthrough experiments. These zeolites show an opposite selectivity; adsorption of ethanol was favorable on all-silica CHA, while the LTA topology had clear preference for butanol. The molecular sieving properties of both zeolites allowed to easily eliminate acetone from the mixture. The molecular interaction mechanisms were studied by density functional theory (DFT) simulations. Effect of mixture composition, humidity and total pressure of the vapor stream on the selectivity and separation behavior was investigated. Desorption profiles were studied to maximize butanol purity and recovery. The combination of LTA with CHA type zeolites (Si-CHA or SAPO-34) in sequential adsorption columns with alternating adsorption and desorption steps allows to obtain butanol in unpreceded purity and recovery. A butanol purity of 99.7 mole% could be obtained at nearly complete butanol recovery, demonstrating the effectiveness of this technique for biobutanol separation processes., S.V.D.P. and J.F.M.D. are grateful to FWO Vlaanderen for financial support (G025614N). M.P., L.Y.S., S.V. and F.R. gratefully acknowledge financial support of Spanish Government (MAT2015-71842P and Severo Ochoa SEV-2012-0267). The authors thank to A. Vidal and T. Blasco for performing NMR measurements and discussion.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High-Performance of Gas Hydrates in Confined Nanospace for Reversible CH4/CO2 Storage

  • Casco, Mirian E.
  • Fauth, Francois
  • Martinez-Escandell, Manuel
  • Rodríguez-Reinoso, Francisco
  • Ramos-Fernandez, Enrique V.
  • Silvestre Albero, Joaquin
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Rey Garcia, Fernando|||0000-0003-3227-5669
The molecular exchange of CH4 for CO2 in gas hydrates grown in confined nanospace has been evaluated for the first time using activated carbons as a host structure. The nano-confinement effects taking place inside the carbon cavities and the exceptional physicochemical properties of the carbon structure allows us to accelerate the formation and decomposition process of the gas hydrates from the conventional timescale of hours/days in artificial bulk systems to minutes in confined nanospace. The CH4/CO2 exchange process is fully reversible with high efficiency at practical temperature and pressure conditions. Furthermore, these activated carbons can be envisaged as promising materials for long-distance natural gas and CO2 transportation because of the combination of a high storage capacity, a high reversibility, and most important, with extremely fast kinetics for gas hydrate formation and release., F.R.R. and J.S.A. acknowledge the financial support from MINECO: Strategic Japanese-Spanish Cooperation Program (PLE2009-0052), Concert Project-NASEMS (PCIN-2013-057) and MAT2013-45008-p, and Generalitat Valenciana (PROMETEO/2009/002). F.R. and J.L.J. thanks financial support from MINECO through projects MAT2012-38567-C02-01, Consolider Ingenio 2010-Multicat CSD-2009-00050 and Sever Ochoa SEV-2012-0267, and Generalitat Valenciana (Prometeo). Authors thank synchrotron ALBA for beamtime availability (Project ID2015021151). E.V.R.F. thanks for his Ramon y Cajal grant (RyC-2012-11427).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Inelastic Neutron Scattering Study on the Location of Bronsted Acid Sites in High Silica LTA Zeolite

  • Lemishko, Tetiana
  • Jiménez-Ruiz, Mónica
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
The presence of Bronsted acid sites (SiOHAl) is crucial in many of the applications of zeolites in petroleum refining and related industries. This acidity relies on the number and location of acid sites, but the latter is difficult to know accurately in spite of a large number of experimental techniques available. Zeolites usually contain many types of acid sites depending on the crystallographic different O-sites and their chemical environment. In the present work we show how inelastic neutron scattering (INS) can be employed for an accurate determination of the location of Bronsted acid sites in zeolites. This is achieved using a sample of LTA zeolite with few defects of connectivity, few (O1H, O2H, O3H) crystallographically different oxygens, and high Si/Al ratio. The narrow and intense peaks corresponding to SiOH bending modes ca. 1100 cm(-1) have been shown, using periodic DFT calculations, to strongly depend on the type of oxygen to which the proton is bonded. A comparison between calculations and INS experiments shows that a large majority of the protons in the sample are of the type O2H, which-vibrate close to the small cavity of LTA., Ministerio de Economia y Competitividad of Spain is thanked for funding through "Severo Ochoa" (SEV-2012-0267) and MAT2015-71842-P projects. All authors thank the ILL for neutron beam-time allocation (Experiment 7-04-144) and the ILL C-Lab for simulation support. G.S. thanks the CTI-CSIC for the use of computational facilities. G.S. and T.L. thank the ILL for the provision of contract SRH/GRI/AS-15/222 and the Ph.D. contract.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Gas confinement in compartmentalized coordination polymers for highly selective sorption

  • Giménez-Marqués, Mónica
  • Calvo Galve, Néstor
  • Vitorica-Yrezabal, Iñigo J.
  • Jiménez-Ruiz, Mónica
  • Rodríguez-Velamazán, J. Alberto
  • González, Miguel A.
  • Coronado, Eugenio
  • Minguez Espallargas, Guillermo
  • Palomino Roca, Miguel|||0000-0003-2983-1038
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
[EN] Discrimination between different gases is an essential aspect for industrial and environmental applications involving sensing and separation. Several classes of porous materials have been used in this context, including zeolites and more recently MOFs. However, to reach high selectivities for the separation of gas mixtures is a challenging task that often requires the understanding of the specific interactions established between the porous framework and the gases. Here we propose an approach to obtain an enhanced selectivity based on the use of compartmentalized coordination polymers, named CCP-1 and CCP-2, which are crystalline materials comprising isolated discrete cavities. These compartmentalized materials are excellent candidates for the selective separation of CO2 from methane and nitrogen. A complete understanding of the sorption process is accomplished with the use of complementary experimental techniques including X-ray diffraction, adsorption studies, inelastic- and quasi-elastic neutron scattering, magnetic measurements and molecular dynamics calculations., Financial support from the Spanish MINECO (CTQ2014-59209-P, MAT2014-56143-R and MAT2015-71842-P), the Generalitat Valenciana (Prometeo and ISIC-Nano programs), the EU (ERC-2016-CoG 724681-S-CAGE) and the VLC/Campus Program is gratefully acknowledged. We thank the Spanish government for the provision of a Severo Ochoa project (SEV-2012-0267) and a Maria de Maeztu project (MDM-2015-0538). M. G.-M. thanks MICINN for a predoctoral FPU grant and the EU for a Marie Sklodowska-Curie postdoctoral fellowship (H2020-MSCA-IF-EF-658224). N. C. G. thanks the Generalitat Valenciana for a VALi+d predoctoral fellowship. J. A. R. -V. acknowledges CSIC for a JAE-doc contract. G. S. thanks SGAI-CSIC for computing time. G. M. E. acknowledges the Blaise Pascal International Chair for financial support and the Ramon y Cajal Programme. J. M. Martinez-Agudo and G. Agusti from the University of Valencia are gratefully acknowledged for magnetic measurements. We are grateful to Institut Laue-Langevin for neutron beam time allocation for INS and QENS experiments (DOI: 10.5291/ILL-DATA.7-05-426). Authors thank ALBA Synchrotron for beam time allocation at BL04-MSPD beamline for HR-PXDR measurements, as well as the collaboration of ALBA staff during the experiment (proposal 2015091491)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

FCC testing at bench scale: New units, new processes, new feeds

  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Sauvanaud, Laurent L.A.|||0000-0002-0274-2740
As the FCC process has evolved over decades, several laboratory scale equipment have appeared to maintain a proper assessment of catalysts activity. Several laboratory equipments are available for simulating the FCC process, from the well known fixed bed, MicroActivity Test to newer, fluid bed or transported bed units. As well, a number of units have been created to simulate other parts of the process such as regenerator or stripper, The increased pressure for treating non-conventional feeds, from reprocessing gasoline to extra-heavy feeds or oils produced from biomass containing large amounts of heteroatoms, increase the needs to have a laboratory test which is as close as possible to the process so that data extraction from the laboratory test are simplified, thus less prone to errors or misunderstanding., Financial support by MICINN (Consolider-Ingenio 2010 MULTICAT) and MINECO (Project MAT2011-29020-0O2-02 and Subprogram for excellence Severo Ochoa, SEV 2012 0267) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cerium oxide as catalyst for the ketonization of aldehydes: Mechanistic insights and a convenient way to alkanes without consumption of external hydrogen

  • Orozco-Arboleda, Lina Marcela
  • Renz, Michael|||0000-0002-1101-9562
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The ketonization of aldehydes joins two molecules, with n carbon atoms each, to a ketone with 2n 1 carbon atoms. When employing cerium oxide as catalyst with nano-sized crystals (<15 nm) the ketone can be obtained in almost 80% yield. In addition, other ketones are observed so that the total ketone selectivity reached almost 90%. Water is consumed during the reaction when the aldehyde is oxidized to the corresponding carboxylic acid, which is established as a reaction intermediate, co-producing hydrogen. Consequently, water has to be co-fed in the reaction to enhance reaction rate and to improve catalyst stability with time on stream. In contrast to zirconium oxide which possesses catalytic activity for the aldol condensation liberating water, with cerium oxide water is not abundant on the surface and the reaction kinetics show that the reaction rate depends on the concentration of the water in the gas-phase, in addition to the dependence on the gasphase concentration of the aldehyde. The liberated hydrogen can be consumed in the hydrodeoxygenation of the ketone product. Doing so, when starting from heptanal, a biomass derived aldehyde, an alkane mixture was obtained with almost 90% diesel content. For the whole cascade reaction with five single steps no reagents are necessary and the only by-product is one molecule of innocuous carbon dioxide (related to two molecules of aldehyde). This shows that cerium oxide possesses a big potential to convert biomass derived aldehydes into biofuels in a very sustainable way., The authors thank MINECO (CTQ2015-67591-P and Severo Ochoa program, SEV-2012-0267) and Generalitat Valenciana (PROMETEO II/2013/011 Project) for funding this work. L. M. O. is grateful to the COLCIENCIAS institute for a Francisco-Jose-de-Caldas (512/2010) doctoral fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

ZSM-5/SBA-15 versus Al-SBA-15 as supports for the hydrocracking/hydroisomerization of alkanes

  • Huyen, Pham T.
  • Nam, Le T. H.
  • Vinh, Tran Q.
  • Parvulescu, Vasile I.
  • Martínez, Cristina|||0000-0002-4415-084X
[EN] Al-SBA-15 and ZSM-5/SBA-15 (ZSC) composite were synthesized following hydrothermal procedures in the presence of triblock copolymer Poly(ethylene glycol)- poly(propylene glycol)-poly(ethylene glycol) (Pluronic P123) and a mixture of tetrapropylammonium bromide (TPABr)/Pluronic P123 templates, respectively. Pt (0.5 wt.%)/Al-SBA-15 and ZSC bifunctional catalysts were then prepared by a wet impregnation methodology and investigated in the hydrocracking/hydroisomerization of n-decane. Pt/ZSC, containing a trimodal porous texture and high Bronsted acidity, exhibited hydrocracking activity while Pt/Al-SBA-15, showing merely Lewis acidity, was active for hydroisomerization. At 300 degrees C the conversion of n-decane on Pt/ZSC reached 98% and cracking selectivity was about 99%. Both catalysts were exhaustively characterized., This research is funded by Vietnam National Foundation for Science and Technology Development (NAFOSTED) under grant number 104.05-2014.21. CM aknowledges financial support by the Spanish Government-MINECO through "Severo Ochoa" (SEV 2012-0267) and CTQ2015-70126-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced H2 Separation through Mixed Proton Electron Conducting Membranes Based on La5.5W0.8M0.2O11.25 d

  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Seeger, J.
  • Roitsch, S.
  • Ivanova, M.
  • Meulenberg, Wilhem Albert
La5.5WO11.25- is a proton-conducting oxide that shows high protonic conductivity, sufficient electronic conductivity, and stability in moist CO2 environments. However, the H-2 flows achieved to date when using La5.5WO11.25- membranes are still below the threshold for practical application in industrial processes. With the aim of improving the H-2 flow obtained with this material, La5.5WO11.25- was doped in the W position by using Re and Mo; the chosen stoichiometry was La5.5W0.8M0.2O11.25-. This work presents the electrochemical characterization of these two compounds under reducing conditions, the H-2 separation properties, as well as the influence of the H-2 concentration in the feed stream, degree of humidification, and operating temperature. Doping with both Re and Mo enabled the magnitude of H-2 permeation to be enhanced, reaching unrivaled values of up to 0.095mLmin(-1)cm(-2) at 700 degrees C for a La5.5W0.8Re0.2O11.25- membrane (760m thick). The spent membranes were investigated by using XRD, SEM, and TEM on focused-ion beam lamellas. Furthermore, the stability in CO2-rich and H2S-containing atmospheres was evaluated, and the compounds were shown to be stable in the atmospheres studied., Financial support from the Spanish Ministry for Science and Innovation (Grants JAE-Pre 08-0058, ENE2011-24761, CSD-2009-0050 and SEV-2012-0267) and the Helmholtz Association of German Research Centers through the Helmholtz Alliance MEM-BRAIN (Initiative and Networking Fund) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photosensitized Thymine Dimerization via Delocalized Triplet Excited States

  • Miró Richart, Paula
  • Miranda Alonso, Miguel Ángel
  • Lhiaubet, Virginie Lyria|||0000-0002-8205-8892
  • Marín García, Mª Luisa|||0000-0002-9789-8894
A new mechanism of photosensitized formation of thymine (Thy) dimers is proposed, which involves generation of a delocalized triplet excited state as the key step. This is supported by chemical evidence obtained by combining one benzophenone and two Thy units with different degrees of freedom, whereby the photoreactivity is switched from a clean Paterno-Buchi reaction to a fully chemo-, regio-, and stereoselective [2+2] cycloaddition., Financial support from the Spanish Government (Grants SEV-2012-0267, CTQ2012-38754-C03-03, and CTQ2012-32621), Generalitat Valenciana (Prometeo Program), and Technical University of Valencia (Predoctoral FPI fellowship for P.M.) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ordered covalent organic frameworks, COFs and PAFs. From preparation to application

  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Covalent organic frameworks, COFs, and their derived sub-groups based on auto-assembly of exclusivelyaromatic units, PAFs, are emerging into the advanced materials field due to their high free porous volume,structural regularity, robustness, hydrothermal stability, and functional variety. They present high gasuptake capacities and presence of stabilized active functions in the framework. This together with chargedlow-density structures combined with their organization through -conjugated system arrays, open thepossibilities of COFs and PAFs to be used as effective materials for adsorption, selective separation andcatalysis, and in nanotechnological applications. This review will be focused on self-assembly synthesis mechanisms, physico-chemical characteristics, and applications of this class of promising covalent porousorganic structures, out looking their possible future approaches and perspectives., This work was funded by the Spanish Government (Severo Ochoa program SEV-2012-0267 and MAT2014-52085-C2-1-P) and by the Generalitat Valenciana (Prometeo). The European Union isalso acknowledged by ERC-AdG-2014-671093 – SynCatMatch.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Configuration-dependent photoinduced electron transfer in diastereomeric naphthalene-amino-naphthalene triads

  • Nuin Pla, Neus Edurne
  • Pischel, Uwe
  • Miranda Alonso, Miguel Ángel
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • Andreu, Inmaculada|||0000-0003-3409-9443
[EN] Novel diastereomeric triads containing two naphthalene chromophores have been designed in which an electron-donating amine moiety is covalently integrated into the connecting bridge. Photophysical studies (steady-state and time-resolved fluorescence) in solvents of different polarity have been performed. A remarkable stereodifferentiation in the intramolecular fluorescence quenching was found in acetonitrile. Laser flash photolysis gave rise to naphthalene-derived radical cations, which were also quenched by the amine with an even higher degree of stereodifferentiation. The results are in agreement with thermodynamic estimations and indicate that photoinduced electron transfer (PET) is the main quenching pathway. Furthermore, theoretical calculations have allowed us to explain the experimentally observed stereodifferentiation in PET quenching., Financial support from the Generalitat Valenciana (Prometeo Program), the Carlos III Institute of Health (Grant RIRAAF, RETICS program, Miguel Servet Contract CP11/00154 for I. A.), and the Spanish government for the provision of the "Severo Ochoa" excellence project (SEV 2012-0267) is gratefully acknowledged. G.S. thanks ASIC-UPV for computing time.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Self-Assembled Aromatic Molecules as Efficient Organic Structure Directing Agents to Synthesize the Silicoaluminophosphate SAPO-42 with Isolated Si Species

  • Martínez Franco, Raquel
  • Cantin Sanz, Angel|||0000-0002-3219-1919
  • Vidal Moya, José Alejandro
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
The use of self-assembled aromatic molecules through pi-pi interactions has allowed the preparation of the silicoaluminophosphate (SAPO) form of the LTA, SAPO-42, with controlled Si content as isolated Si sites in the framework, and high thermal stability. Different SAPO-42 zeotypes can be synthesized with different acidity, morphology, and crystal size, depending:on the selected quinolinium derived aromatic molecule as OSDA and the amount of fluoride content in the synthesis gels., Financial support by the Spanish Government-MINECO through "Severo Ochoa" (SEV 2012-0267), Consolider Ingenio 2010-Multicat, MAT2012-37160, and Intramural-201480I015 is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Vapor-Phase Photocatalytic Overall Water Splitting Using Hybrid Methylammonium Copper and Lead Perovskites

  • García, Teresa
  • García-Aboal, Rocío
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Films or powders of hybrid methylammonium copper halide perovskite exhibit photocatalytic activity for overall water splitting in the vapor phase in the absence of any sacrificial agent, resulting in the generation of H-2 and O-2, reaching a maximum production rate of 6 mu mol H-2 x g cat(-1)h(-1) efficiency. The photocatalytic activity depends on the composition, degreasing all inorganic Cs2CuCl2Br2 perovskite and other Cl/Br proportions in the methylammonium hybrids. XRD indicates that MA(2)CuCl(2)Br(2) is stable under irradiation conditions in agreement with the linear H-2 production with the irradiation time. Similar to copper analogue, hybrid methylammonium lead halide perovskites also promote the overall photocatalytic water splitting, but with four times less efficiency than the Cu analogues. The present results show that, although moisture is strongly detrimental to the photovoltaic applications of hybrid perovskites, it is still possible to use these materials as photocatalysts for processes requiring moisture due to the lack of relevance in the photocatalytic processes of interparticle charge migration., This research was funded by the Fundacion Ramon Areces (XVII Concurso Nacional para la adjudicacion de Ayudas a la Investigacion en Ciencias de la Vida y de la Materia), Intramural CSIC project 201680I006, and the Spanish Ministry of Spain Severo Ochoa Program, grant number SEV-2016-0683, grant number MAT2015-69669-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nanocrystalline SSZ-39 zeolite as an efficient catalyst for the methanol-to-olefin (MTO) process

  • Martín García, Nuria
  • Li, Zhibin
  • Yu, Jihong
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The synthesis of nanosized SSZ-39 zeolite has been achieved using a high silica FAU zeolite as the Si and Al source and tetraethylphosphonium (TEP) cations as OSDAs. The obtained SSZ-39 material shows a remarkably high catalyst lifetime compared to conventional SSZ-13 and SSZ-39 materials., Financial support by the Spanish Government-MINECO through ‘‘Severo Ochoa’’ (SEV2012-0267), MAT2015-71261-R, and CTQ2015-68951-C3-1-R is acknowledged. The European Union is also acknowledged by the SYNCATMATCH project (Grant Agreement no. 671093). N. M. thanks MINECO for economical support through pre-doctoral fellowship (BES-2013-064347). J. Y. and A. C. thank the National Natural Science Foundation of China (21320102001) for supporting this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dependence of cracking activity upon the Brønsted acidity of Y zeolite: DFT study and experimental confirmation

  • Niwa, M.
  • Suzuki, Kiwa
  • Morishita, N.
  • Okumura, K.
  • Katada, N.
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
[EN] Dependence of the activity for alkane cracking on the Bronsted acidity of HY and cation exchanged HY zeolites was clearly revealed by the periodic DFT calculation and the experimental confirmation., The present work is supported by the Grant-in-Aids for Scientific Research (B) (21360396) and (B) (23360358) from Ministry of Education, Culture, Sports, Science and Technology, Japan. G.S. thanks the Spanish government for the provision of the excellence programme "Severo Ochoa" (project SEV 2012 0267).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Outstanding hydrogen permeation through CO2-stable dual phase ceramic membranes

  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Solis Díaz, Cecilia
  • Kjolseth, C.
[EN] Mixed electronic-and protonic-conducting composites made up of physical mixtures of La5.5WO11.25-delta-La0.87Sr0.13CrO3-delta (LWO-LSC) have been evaluated as H-2 separation membranes for operation at temperatures greater than 550 degrees C. The mixture of these two ion-conducting phases led to non-linear synergetic effects; i.e. unexpected enhancement of the total conductivity and well-balanced ambipolar conductivity, resulting in appealing H-2 permeation fluxes through robust ceramic membranes. The preparation, primary characterization, H-2 permeation and stability studies of various composites is presented. Mixing LWO and LSC phases makes it possible (1) to improve the LSC sintering behavior and to achieve very high membrane densities and (2) to obtain compounds with high total conductivity, higher than that shown for LWO and LSC, separately. The highest permeation rate is achieved for the 50 vol%-LWO-LSC membrane, though other composite compositions showed higher total conductivity. Moreover, the influence on the H-2 permeation of the composite composition, the humidification of gas streams, temperature and the use of various catalytic coatings on the membrane surface is evaluated. The nature of the transport mechanism is investigated by the permeation studies using deuterium tracers. The H-2 permeation rates reported in this investigation for a 370 mu m thick 50 vol%-LWO-LSC membrane, e.g. 0.15 mL min(-1) cm(-2) at 700 degrees C, are the highest reported values, up to date, for any bulk mixed protonic-electronic membranes. The H-2 permeation magnitude achieved at moderate temperatures along with the proven stability in CO2-rich atmospheres are firm steps towards the future application of this type of membrane for industrial processes., Financial support by the Spanish government (ENE2011-24761, CSD-2009-0050, and SEV-2012-0267) and the Helmholtz Association of German Research Centers through the portfolio topic MEM-BRAIN is kindly acknowledged. Protia acknowledges financial support from the Research Council of Norway (RCN) under the Gassmaks program ICOR (201418). The authors are indebted to M. Fabuel for sample preparation. The support of the Servicio de Microscopia Electronica of the Universidad Politecnica de Valencia is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

ITQ-39 zeolite, an efficient catalyst for the conversion of low value naphtha fractions into diesel fuel: The role of pore size on molecular diffusion and reactivity

  • Martínez Armero, Marta Evelia
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Martínez, Cristina|||0000-0002-4415-084X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] ITQ-39, a multipore zeolite with interconnected 12- and 10-ring channel systems, effectively catalyzes the alkylation of two low value naphtha fractions for the production of diesel range alkylaromatics. A catalytic and molecular dynamics study allows us to conclude that its higher selectivity to the desired diesel fraction and, especially, its longer catalyst life as compared to beta or MCM-22, conventionally used as heterogeneous alkylation catalysts, are due to the combined contribution of its small nano-sized crystallites, moderate Bronsted acidity and unique framework topology. The small diffusion coefficients obtained for alkylaromatics on ITQ-39 as compared to those corresponding to the large pore beta zeolite evidence the significant diffusional problems of most of the reactants and products through the channels of the ITQ-39 structure. Thus, alkylation reactions on this zeolite seem to occur mainly on the most external acid sites (external surface, pore mouths), whereas the zeolite structure contributes positively by preventing undesired reactions to occur, which would result in lower selectivity to the monoalkylated products and in a faster catalyst deactivation., Financial support by the Spanish Government-MINECO through "Severo Ochoa" (SEV 2012-0267), Consolider Ingenio 2010-Multicat, MAT2012-37160 and MAT2012-31657, by the European Union through ERC-AdG-2014-671093 - SynCatMatch and by the Generalitat Valenciana through the Prometeo program (PROME-TEOII/2013/011) is acknowledged. Repsol is thanked for financial support and permission to publish these results. G.S. thanks ASIC-UPV for computing time. The Electron Microscopy Service of the UPV is acknowledged for their help in samples characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Rigid/Flexible Organic Structure Directing Agents for Directing the Synthesis of Multipore Zeolites: A Computational Approach

  • Pulido, Angeles
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The preferential crystallization of pure silica ITQ-39 and MFI zeolites using SDAEt and SDAPr, respectively, as organic structure directing agents (SDAs) is investigated here by theoretical methods using a periodic DFT-D model. For this purpose, the templating roles of SDAEt and SDAPr have been analyzed following a systematic study of the interaction of these two SDAs with the previously described zeolites through SDA stabilization energies (balance of intermolecular SDA dispersive interactions and SDA strain). From theoretical studies, it has been found that SDAEt located inside ITQ-39 zeolite and SDAPr placed within MFI show the largest stabilizations. These theoretical results agree with previous experimental observations for the preferential crystallization of pure silica ITQ-39 and MFI using SDAEt and SDAPr molecules, respectively., Financial support by the Spanish Government-MINECO through "Severo Ochoa" (SEV 2012-0267), Consolider Ingenio 2010-Multicat, MAT2012-37160 and, Intramural-201480I015 is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Exceptional oxidation activity with size-controlled supported gold clusters of low atomicity

  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Sabater Picot, Mª José
  • Navas Escrig, Javier
  • Yacaman, Miguel José
  • Larios, Eduardo
  • Posadas, Álvaro
  • López Quintela, M. Arturo
  • Buceta, David
  • Mendoza, Ernest
  • Guilera, Gemma
  • Mayoral, Álvaro
[EN] The catalytic activity of gold depends on particle size, with the reactivity increasing as the particle diameter decreases. However, investigations into behaviour in the subnanometre regime (where gold exists as small clusters of a few atoms) began only recently with advances in synthesis and characterization techniques. Here we report an easy method to prepare isolated gold atoms supported on functionalized carbon nanotubes and their performance in the oxidation of thiophenol with O-2. We show that single gold atoms are not active, but they aggregate under reaction conditions into gold clusters of low atomicity that exhibit a catalytic activity comparable to that of sulfhydryl oxidase enzymes. When clusters grow into larger nanoparticles, catalyst activity drops to zero. Theoretical calculations show that gold clusters are able to activate thiophenol and O-2 simultaneously, and larger nanoparticles are passivated by strongly adsorbed thiolates. The combination of both reactants activation and facile product desorption makes gold clusters excellent catalysts., Financial support from the Spanish Science and Innovation Ministry (Consolider Ingenio 2010-MULTICAT CSD2009-00050, Subprograma de apoyo a Centros y Universidades de Excelencia Severo Ochoa SEV 2012 0267, MAT2011-28009 and MAT2010-20442 projects) and Xunta de Galicia (Grupos Ref.Comp.2010/41) is acknowledged. M.J.Y. and E. L. acknowledge the support of the National Centre for Research Resources (5 G12RR013646-12) and the National Institute on Minority Health and Health Disparities (G12MD007591) from the National Institutes of Health and of the National Science Foundation for support with grants DMR-1103730 and PREM: NSF PREM Grant # DMR 0934218. We also acknowledge the support of Consejo Nacional De Ciencia y Tecnologia. J.N. expresses his gratitude to Consejo Superior de Investigaciones Cientificas for a JAE Fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of Zeolite Protective Overlayer on the Performances of Pd Thin Film Membrane on Tubular Asymmetric Alumina Supports

  • Abate, Salvatore
  • Prieto Arnal, Alejandro
  • Gentiluomo, Serena
  • Perathoner, Siglinda
  • Centi, Gabriele
  • Díaz, Urbano|||0000-0003-1472-8724
  • Palomino Roca, Miguel|||0000-0003-2983-1038
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The role of zeolite overlayer in the performance of Pd thin film membranes on asymmetric alumina tubular supports is analyzed. These novel multilayer membranes have a ceramic base support (asymmetric &#945;-Al2O3 tubes) on which a crack-free Pd dense thin film was deposited by electroless plating deposition followed by creation of a further zeolite (titanium silicalite, TS-1) membrane compact layer on the top of the Pd thin film. The TS-1 layer was prepared by a two-step procedure: (i) the preseeding with TS-1 nanocrystals by dip-coating, eventually assisted by a polymer (PEI or PDADMAC), followed by (ii) a secondary growth. The composite membranes are crack-free and homogeneous, and show good mechanical properties, in terms of adhesion between metallic film and substrate, and between the zeolitic film and Pd thin film. The composite membranes were evaluated in terms of H2 permeance with respect to bare Pd membrane. The zeolite overlayer induces a change in the rate-limiting step in H2 transport, due to the partial coverage of Pd surface by zeolite, compensated by an increase in the sticking coefficient of H2 adsorption. These materials were tested to protect Pd from deactivation by propylene, for use in catalytic membrane reactors for propane dehydrogenation., The research leading to these results has received funding from European Community's Seventh Framework Programme, through the Collaborative Project INCAS, Contract No. NMP2-LA-2010-245988. A.P., M.P., U.D., and A.C. thank the Spanish Government (MAT2014-52085-C2-1-P, Consolider-Ingenio MULTICAT CSD2009-00050 and Severo Ochoa Excellence Program SEV-2012-0267) for additional funds. A.P., M.P., U.D., and A.C. also thank the Electron Microscopy Service of the UPV for their help in sample characterization. SA, S.G., S.P., and G.C. thank the Italian Ministero degli Affari Esteri e della Cooperazione Internazionale, in the frame of MEME project MAE13A2CEN, for additional support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ultrafast Electron Diffraction Tomography for Structure Determination of the New Zeolite ITQ-58

  • Simancas-Coloma, Jorge
  • Simancas Coloma, Raquel
  • Bereciartua-Pérez, Pablo Javier
  • Nicolopoulos ., Stavros
  • Das, Partha Pratim
  • Gemmi, Mauro
  • Mugnaioli, Enrico
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] In this work a new ultrafast data collection strategy for electron diffraction tomography is presented that allows reducing data acquisition tithe by one order of Magnitude.,,This Methodology minimizes the radiation damage of, beam-sensitive materials, such as microporous materials. This method, combined with the precession of the electron beam, provides high quality data enabling the determination of very complex structures. Most importantly,, the implementation of this new, electron diffraction methodology is, easily affordable in any modem electron Microscope. As a proof of concept, we have solved a new highly complex zeolitic structure named ITQ-58, with a very low symmetry (triclinic) and a large unit cell volume (1874.61(3)), containing 16 silicon and 32 oxygen atoms in its asymmetric unit, which would be very difficult to solve with the state of the art techniques., The authors gratefully acknowledge financial support of European Research Council (ERC-2014-AdG ref 671093 "MATching zeolite SYNthesis with CATalytic activity"), Spanish Government (MAT2015-71842-P (MINECO/FEDER), MAT2012-38567-C02-01 and Severo Ochoa SEV-2012-0267), and Generalitat Valenciana (Project Prometeo). E.M. was also supported by the Italian project FIR2013 Exploring the Nanoworld. Authors thank beamline MSPD at Spanish Synchrotron ALBA for beam time allocation. We acknowledge JEOL Japan, JEOL Europe, and specially Junichi Morimoto from JEOL Europe for the assistance during the specific alignments of the microscope. Finally, authors specially thank the Electron Microscopy Service of the Universitat Politecnica de Valencia and, in particular, Manuel J. Planes and Jose L. Moya for their invaluable support for setting up the EDT data acquisition. Original data (collected EDT frames and integrated intensities) can be requested directly from corresponding authors.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Stereoselective Fluorescence Quenching in the Electron Transfer Photooxidation of Nucleobase-Related Azetidines by Cyanoaromatics

  • Fraga-Timiraos, Ana Belén
  • Peiro-Penalba, Vicente
  • Miranda Alonso, Miguel Ángel
  • Rodríguez Muñiz, Gemma María|||0000-0001-8989-2401
  • Lhiaubet, Virginie Lyria|||0000-0002-8205-8892
[EN] Electron transfer involving nucleic acids and their derivatives is an important field in bioorganic chemistry, specifically in connection with its role in the photo-driven DNA damage and repair. Four-membered ring heterocyclic oxetanes and azetidines have been claimed to be the intermediates involved in the repair of DNA (6-4) photoproduct by photolyase. In this context, we examine here the redox properties of the two azetidine isomers obtained from photocycloaddition between 6-aza-1,3-dimethyluracil and cyclohexene. Steady-state and time-resolved fluorescence experiments using a series of photoreductants and photooxidants have been run to evaluate the efficiency of the electron transfer process. Analysis of the obtained quenching kinetics shows that the azetidine compounds can act as electron donors. Additionally, it appears that the cis isomer is more easily oxidized than its trans counterpart. This result is in agreement with electrochemical studies performed on both azetidine derivatives., Spanish Government (CTQ2015-70164-P, RIRAAF RETICS RD12/0013/0009, Red de Fotoquimica Biologica CTQ2015-71896-REDT, Severo Ochoa program/SEV-2012-0267 and SVP-2013-068057 for A. B. F.-R. grant) and Generalitat Valenciana (Prometeo II/2013/005) are gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

ITQ-54: a multi-dimensional extra-large pore zeolite with 20 × 14 × 12-ring channels

  • Jiang, Jiuxing
  • Yun, Yifeng
  • Zou, Xiaodong
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Corma Canós, Avelino|||0000-0002-2232-3527
A multi-dimensional extra-large pore silicogermanate zeolite, named ITQ-54, has been synthesised by in situ decomposition of the N,N-dicyclohexylisoindolinium cation into the N-cyclohexylisoindolinium cation. Its structure was solved by 3D rotation electron diffraction (RED) from crystals of ca. 1 μm in size. The structure of ITQ-54 contains straight intersecting 20 × 14 × 12-ring channels along the three crystallographic axes and it is one of the few zeolites with extra-large channels in more than one direction. ITQ-54 has a framework density of 11.1 T atoms per 1000 Å3, which is one of the lowest among the known zeolites. ITQ-54 was obtained together with GeO2 as an impurity. A heavy liquid separation method was developed and successfully applied to remove this impurity from the zeolite. ITQ-54 is stable up to 600 °C and exhibits permanent porosity. The structure was further refined using powder X-ray diffraction (PXRD) data for both as-made and calcined samples., This work was supported by the Spanish Government (MAT2012-38567-C02-01, Consolider Ingenio 2010-Multicat CSD-2009-00050 and Severo Ochoa SEV-2012-0267), Generalitat Valenciana (Project Prometeo), the Swedish Research Council (VR), the Swedish Governmental Agency for Innovation Systems (VINNOVA) and the Knut & Alice Wallenberg Foundation through a grant for purchasing the TEMs and the project grant 3DEM-NATUR. Y. F. Yun thanks the China Scholarship Council (CSC). The authors acknowledge ESRF, Grenoble for the use of the beamline ID31 and the mail-in system of 11-BM at the Advanced Photon Source, Argonne National Laboratory, USA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

One-pot co-crystallization of beta and pentasil nanozeolites for the direct conversion of a heavy reformate fraction into xylenes

  • Margarit Benavent, Vicente Juan
  • Portilla Ovejero, Mª Teresa
  • Abudawoud, Raed
  • Al-Zahrani, Ibrahim M.
  • Shaikh, Sohel
  • Navarro Villalba, Mª Teresa|||0000-0001-5012-8414
  • Martínez, Cristina|||0000-0002-4415-084X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Upgrading of the heavy reformate fraction (HR), containing mainly C9+ aromatics, is usually performed by dealkylation or by transalkylation with added benzene and/or toluene to obtain the more valuable xylenes. However, when the costs related to the use of benzene and toluene are considered, the one-step dealkylation/transalkylation of the C9+ alkylaromatics to xylenes becomes economically attractive. Thus, in a first step, ethylmethylbenzenes (EMB) will have to be dealkylated to toluene, which will then react with the trimethylbenzenes (TMB) present in the HR feed to produce xylenes by transalkylation. Medium pore zeolites will favor dealkylation, whereas large pore zeolites will be more adequate for carrying out the transalkylation reaction. In this work, we present the one-pot synthesis of beta-pentasil aggregates with tunable ratios of the large pore beta to the medium pore component. We show that the close proximity of the beta and pentasil nanocrystals obtained by one-pot co-crystallization synthesis, results in a highly efficient catalyst for the consecutive dealkylation/transalkylation process. The bifunctional catalyst based on the co-crystallized aggregate is more active and selective to xylenes than a catalyst based on a physical mixture of equivalent beta and pentasil nanozeolites synthesized following an analogous procedure. The small crystallite sizes of the co-crystallized zeolites provide the additional advantage of a lower deactivation rate as compared to a reference benchmark catalyst. Results are shown on both, model molecules and industrial HR feed., This work has been supported by Saudi Aramco, by the Spanish Government-MICINN through "Severo Ochoa" (SEV 2012-0267) and RTI2018-101033-B-I00, by the European Union through ERC-AdG-2014-671093 (SynCatMatch) and by the Ftmdacion Ramon Areces through a research contract of the "Life and Materials Science" program. We thank Belen Esparcia for technical assistance, and the Electron Microscopy Service of the UPV for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Graphene oxide as a metal-free catalyst for oxidation of primary amines to nitriles by hypochlorite

  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • Puche Panadero, Marta|||0000-0002-9390-5532
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Pavel, Octavian D.
  • Cojocaru, Bogdan
  • Tirsoaga, Alina
  • Parvulescu, Vasile
[EN] Graphene oxide catalyzes oxidation by NaClO of primary benzyl and aliphatic amines to a product distribution comprising nitriles and imines. Nitriles are the sole product for long chain aliphatic amines. Spectroscopic characterization suggests that percarboxylic and perlactone groups could be the active sites of the process., Financial support by the Spanish Ministry of Economy and Competitiveness (Severo Ochoa and CTQ2012-32315) and Generalitat Valenciana (Prometeo 2013-014) is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

YSZ monoliths promoted with Co as catalysts for the production of H2 by steam reforming of ethanol

  • Gaudillere, Cyril Christian
  • González Pérez, Juan José
  • Chica, Antonio
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Steam reforming of ethanol was investigated between 400 degrees C and 600 degrees C over 3 mol% Y2O3 doped ZrO2 monolith infiltrated with Co, known as an effective catalyst for this reaction. Monoliths were fabricated by implementing the freeze-casting technique in order to obtain hierarchical, vertical and highly ordered porous microstructure resulting in very low pressure drop, high surface area and accessibility to active sites. Catalytic monoliths were firstly loaded with 3 wt% of Co. Catalytic activity of Co-containing monolith was compared with the catalytic activity of a powdered material with the same chemical composition than the catalytic monolith. The results show a clear improvement all over the temperature range of the ethanol conversion and H-2 yield and a decrease of the by-products contents when using a freeze-cast monolith support. The incorporation of La enabled a strong decrease in coke deposition over the activated monolith. The effect of the addition of 0.25 wt.% of Pt was also studied. Pt makes possible to inhibit carbon deposition but has a detrimental effect on ethanol conversion at temperatures above 500 degrees C and on H-2 selectivity at low temperature. A higher Pt loading of 0.8 wt% did not bring any beneficial effect and was even detrimental at low temperature. Finally, the beneficial effect of the implementation of freeze-cast monolith in comparison with the not structured fixed-bed configuration is explained by the difference of packing since and improved fluid dynamics at similar GHSV, the former one promotes in a higher proportion the Water Gas Shift Reaction (WGSR) further in the monolith length. (C) 2017 Elsevier B.V. All rights reserved., Financial support by the Spanish Government (ENE2014-57651 and SEV-2012-0267 grants) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of mebendazole binding to its target biomolecule by laser flash photolysis

  • Jornet Olivé, Mª Dolors
  • Andreu, Jose Maria
  • Domingo, L.R.
  • Miranda Alonso, Miguel Ángel
  • Bosca Mayans, Francisco
  • Tormos Faus, Rosa Esperanza
[EN] Mebendazole (MBZ) and related anticancer benzimidazoles act binding the beta-subunit of Tubulin (TU) before dimerization with alpha-TU with subsequent blocking microtubule formation. Laser flash photolysis (LFP) is a new tool to investigate drug-albumin interactions and to determine binding parameters such as affinity constant or population of binding sites. The aim of this study was to evaluate the interactions between the nonfluorescent mebendazole (MBZ) and its target biomolecule TU using this technique. Before analyzing the MBZ@TU complex it was needed to determine the photophysical properties of MBZ triplet excited state ((3)MBZ*) in different media. Hence, 3MBZ* showed a transient absorption spectrum with maxima at 520 and 375 nm and a lifetime much longer in acetonitrile (12.5 mu s) than in water (260 ns). The binding of MBZ to TU produces a greater increase of the lifetime of 3MBZ* (25 mu s). This fact and the strong electron acceptor capability observed for (3)MBZ* evidence that MBZ must not be located close to any electron donor amino acid of TU such as its tryptophan or cysteine residues. Adding increasing amounts of MBZ to aqueous TU was determined the MBZ-TU binding constant (2.0 +/- 0.5 x 10(5) M-1 at 298 K) which decreased with increasing temperature. The LFP technique has proven to be a powerful tool to analyze the binding of drug-TU systems when the drug has a detectable triplet excited state. Results indicate that LFP could be the technique of choice to study the interactions of non-fluorescent drugs with their target biomolecules. (C) 2015 Elsevier B.V. All rights reserved., Financial support from the Spanish Government (grants CTQ2010-19909, BFU2011-23416 and SEV 2012-0267), the Generalitat Valenciana (Prometeo II/2013/005) and Comunidad de Madrid (S2010/BMD-2353) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multipore zeolites: synthesis and catalytic applications

  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Martínez, Cristina|||0000-0002-4415-084X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] In the last few years, important efforts have been made to synthesize so-called "multipore" zeolites, which contain channels of different dimensions within the same crystalline structure. This is a very attractive subject, since the presence of pores of different sizes would favor the preferential diffusion of reactants and products through those different channel systems, allowing unique catalytic activities for specific chemical processes. In this Review we describe the most attractive achievements in the rational synthesis of multipore zeolites, containing small to extra-large pores, and the improvements reported for relevant chemical processes when these multipore zeolites have been used as catalysts., Financial support by the Spanish Government-MINECO through “Severo Ochoa” (SEV 2012-0267), Consolider Ingenio 2010-Multicat, MAT2012-37160, MAT2012-31657 and Intramural-201480I015 is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Use of mesoporous molecular sieves in the production of fine chemicals: Preparation of dihydroquinolinones of pharmaceutical interest from 2’-aminochalcones

  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Iborra Chornet, Sara|||0000-0003-1758-5095
  • Martí Montaner, Laura
Solid catalysts can be an alternative to homogeneous mineral Bronsted and Lewis acids for the synthesis of pharmaceuticals provided that diffusional and adsorption properties of reactants and products could be controlled. Structured micro and especially monolayered zeolites and mesoporous material can be active and selective for performing intramolecular cyclization reaction, and more specifically for intramolecular aza-Michael cyclizations of 2¿-aminochalcones to yield aryl-2,3-dihydro-4(1H)-quinolinones of pharmaceutical interest. However, the catalyst deactivates by strong adsorption of the basic quinolinone product. Product desorption has been controlled by optimizing catalyst pore structure and surface composition, together with a proper selection of solvent and reaction temperature. Process intensification for the synthesis of aryl-2,3-4(1H)-quinolinones of pharmaceutical interest has been achieved by preparing catalysts that allow the one pot synthesis of the dihydroquinolinones starting from 2 -nitrochalcones with excellent yields., Financial support from Consolider-Ingenio 2010 (project MULTI-CAT), Spanish MICINN Project (CTQ-2011-27550), Generalitat Valenciana (Prometeo program), and Program Severo Ochoa are gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multielement crystalline and pseudocrystalline oxides as efficient catalysts for the direct transformation of glycerol into acrylic acid

  • Chieregato, Alessandro
  • García-González, Ester
  • Puglia, Giuseppe
  • Basile, Francesco
  • Bandinelli, Claudia
  • Cavani, Fabrizio
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Glycerol surplus from biodiesel synthesis still represents a major problem in the biofuel production chain. Meanwhile, those in the acrylic acid market are looking for new processes that are able to offer viable alternatives to propylene-based production. Therefore, acrylic acid synthesis from glycerol could be an effective solution to both issues. Among the viable routes, one-pot synthesis theoretically represents the most efficient process, but it is also highly challenging from the catalyst design standpoint. A new class of complex W MoV mixed-oxide catalysts, which are strongly related to the hexagonal tungsten bronze structure, able to directly convert glycerol into acrylic acid with yields of up to 51% are reported., The authors from the Instituto Tecnologia Quimica would like to thank the Spanish Government (Project CTQ2012-37925-C03-1 and program Severo Ochoa SEV-2012-0267) for financial support. CIRI Energia e Ambiente ALMA MATER STUDIORUM, Universita di Bologna, is acknowledged for the grant to A.C. E.G.G. acknowledges financial support from the Spanish Government through the project MAT2010-19837-C06-05.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bulk transport and oxygen surface exchange of the mixed ionic-electronic conductor Ce1 xTbxO2-d (x=0.1, 0.2, 0.5)

  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Yoo, C.Y.
  • Bouwmeester, H.J.M
Bulk ionic and electronic transport properties and the rate of oxygen surface exchange of Tb-doped ceria have been evaluated as a function of Tb concentration, aiming to assess the potential use of the materials as high-temperature oxygen-transport membranes and oxygen reduction catalysts. The materials were synthesized by the co-precipitation method. Cobalt oxide (2 mol%) was added in order to improve sinterability and conductivity. The materials were studied by means of X-ray diffraction (XRD), temperatureprogrammed desorption (TPD), thermogravimetry (TG), DC-conductivity and UV-vis spectrophotometry. The results indicate that the extent of mixed ionic electronic conductivity is a function of temperature and can be tuned by modifying the Tb- (and Co-doping) concentration. Low Tb-content materials (x ¿ 0.1 and 0.2) are predominant ionic conductors, but the materials with 50 mol% Tb show both p-type electronic and ionic conductivity. The enhanced electronic conduction in Ce0.5Tb0.5O2 d is associated with narrowing of the band gap upon doping ceria with Tb. In addition, the surface chemistry of the samples was investigated by means of X-ray photoelectron spectroscopy (XPS) and pulse isotopic exchange (PIE). The surface exchange rate is found to increase on increasing the level of Tb doping. The highest surface exchange rates in this study are found for materials doped with 50 mol% Tb., Funding from the Spanish Government (BES-2009-015835, ENE2011-24761 and SEV-2012-0267 grants) and Helmholtz Association (MEM-BRAIN Portfolio) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

One-pot two-step process for direct propylene oxide production catalyzed by bi-functional Pd(Au)@TS-1 materials

  • Prieto Arnal, Alejandro
  • Palomino Roca, Miguel|||0000-0003-2983-1038
  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Different bi-functional materials (Pd(Au)@TS-1) based on metallic nanoparticles supported onto active nanocrystalline titanium silicalite (TS-1) zeolites were synthesized, characterized and used as recyclable heterogeneous catalysts for direct propylene oxide production from hydrogen, oxygen and propylene through one-pot two-step consecutive process. These catalysts allowed carrying out the combined reaction where metallic nanoparticles catalyzed the formation of in situ H2O2 that was the necessary intermediate for propylene epoxidation catalyzed by active TS-1 nanocrystalline support. Several variables were considered such as use of supercritical CO2 conditions, modifiable content of metallic species, and presence of additional co-solvents, surface acidity inhibitors and H2O2 stabilizers. Reusability and stability of the bi-functional catalyst was showed through consecutive catalytic cycles., The research leading to these results has received funding from European Community’s Seventh Framework Programme, through the Collaborative Project INCAS, Contract Nr. NMP2-LA-2010- 245988. Authors thank additional funds from Spanish Government (MAT2014-52085-C2-1-P and Severo Ochoa Excellence Program SEV-2012-0267).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The influence of swelling agents molecular dimensions on lamellar morphology of MWW-type zeolites active for fructose conversion

  • Schwanke, Anderson Joel
  • Pergher, Sibele
  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] A new route to obtain pillared, disordered or desilicated MWW-type zeolites was developed assisted by quaternary ammonium surfactants with different hydrocarbon tail size acting as swelling agents (C(12)TA(+), C(I6)TA(+), C(18)TA(+)) and TPA(+) both exchanged to their hydroxide forms instead of only one swelling agent (C(n)TA(+) or TPA(+)) in hydroxide form. Effect of surfactant concentration and swelling conditions were determinant to obtain MWW-type zeolites with different lamellar organization and spatial distribution of individual zeolitic layers. Specifically, soft swelling at 25 degrees C with C(12)TA(+) preserved layer structure reaching a final disordered/pillared structure while pillared structures are obtained in the case of materials swollen with C(16)TA(+) and C(18)TA(+). Aggressive swelling processes at 80 degrees C favored desilication, damaging the layers structure in case of C(12)TA(+) while pillared materials are obtained after swollen with C(16)TA(+) and C(18)TA(+) surfactants. It was proved that both swelling agents in hydroxide forms combining with swelling and pillaring procedure influenced on physico-chemical and morphological nature of MWW-type materials due to the particular conditions used. The obtained derivative MWW zeolites with different morphology, order and accessibility levels were firstly evaluated by catalytic dehydration of fructose to 5-hydroxymethylfurfural (5-HMF) showing superior activity compared to beta zeolites reported in literature., Anderson Joel Schwanke is grateful to CAPES Foundation and PDSE program (process number 99999.004779/2014-02) from Ministry of Education of Brazil. U.D and A.C acknowledge to the Spanish Government (Severo Ochoa program SEV-2012-0267 and MAT2014-52085-C2-1-P) and to the Generalitat Valenciana (Prometeo 11/2013-011) by the funding. The European Union is also acknowledged by ERC-AdG-2014-671093 - SynCatMatch.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hydrogen separation through tailored dual phase membranes with nominal composition BaCe0.8Eu0.2O3-delta:Ce0.8Y0.2O2-delta at intermediate temperatures

  • Ivanova, Mariya E.
  • Palisaitis, Justinas
  • Sohn, Yoo Jung
  • Meulenber, Wilhelm A.
  • Guillon, Olivier
  • Mayer, Joachim
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Hydrogen permeation membranes are a key element in improving the energy conversion efficiency and decreasing the greenhouse gas emissions from energy generation. The scientific community faces the challenge of identifying and optimizing stable and effective ceramic materials for H-2 separation membranes at elevated temperature (400-800 degrees C) for industrial separations and intensified catalytic reactors. As such, composite materials with nominal composition BaCe0.8Eu0.2O3-delta:Ce0.8Y0.2O2-delta revealed unprecedented H-2 permeation levels of 0.4 to 0.61 mL center dot min(-1)center dot cm(-2) at 700 degrees C measured on 500 mu m-thick-specimen. A detailed structural and phase study revealed single phase perovskite and fluorite starting materials synthesized via the conventional ceramic route. Strong tendency of Eu to migrate from the perovskite to the fluorite phase was observed at sintering temperature, leading to significant Eu depletion of the proton conducing BaCe0.8Eu0.2O3-delta phase. Composite microstructure was examined prior and after a variety of functional tests, including electrical conductivity, H-2-permeation and stability in CO2 containing atmospheres at elevated temperatures, revealing stable material without morphological and structural changes, with segregation-free interfaces and no further diffusive effects between the constituting phases. In this context, dual phase material based on BaCe0.8Eu0.2O3-delta:Ce0.8Y0.2O2-delta represents a very promising candidate for H-2 separating membrane in energy-and environmentally-related applications, This work has been conducted with the financial support by the Helmholtz Association under the Research Programme Energy Efficiency, Materials and Resources. Financial funding from the Spanish Government (ENE2014-57651 and SEV-2012-0267 grants) is also gratefully acknowledged. ZEA-3 at FZJ is gratefully acknowledged for performing the ICP-OES analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cu mixed oxides based on hydrotalcite-like compounds for the oxidation of trichloroethylene

  • Blanch Raga, Neus
  • Fetter, Geolar
  • Bosch, P.
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
[EN] Different Cu/(Mg or Ni)/Al mixed oxides based on hydrotalcite-like compounds have been studied for the catalytic oxidation of trichloroethylene. The catalysts have been synthesized and characterized by different techniques such as N-2-adsorption, inductively coupled plasma (ICP), X-ray diffraction, and temperature-programmed reduction (TPR). It has been shown that the activity for the catalytic abatement of trichloroethylene depends on the presence of metals with redox properties in the catalyst composition. The best results have been obtained with containing copper mixed oxides, although there is no direct correspondence between the copper content and the catalyst activity. These catalysts are highly active and selective, CO2 and HCl being the main reaction products. A mechanism for the reaction has been proposed., The authors wish to thank CONACYT (project 154060), the Spanish Ministry of Economy and Competitiveness through the Severo Ochoa program (SEV-2012-0267), as well as operating grants Consolider Ingenio Multicat (CSD-2009-00050) and MAT-2012-3856-C02-01 for the financial support. N.B.R. acknowledges Catedra Cemex Sostenibilidad (UPV) for a fellowship. The technical work of Adriana Tejeda in X-ray diffraction is also gratefully recognized.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nanometer-thick films of antimony oxide nanoparticles grafted on defective graphenes as heterogeneous base catalysts for coupling reactions

  • Simion, Andrada
  • Candu, Natalia
  • COJOCARU, BOGDAN
  • Coman, Simona M.
  • Bucur, C.
  • Man, Isabela Costinela
  • PARVULESCU, VASILE I.
  • Forneli Rubio, Mª Amparo
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Films of few-layers defective N-doped or undoped graphene (10-15 nm) containing antimony oxide nanoparticles (15-30 nm) have been prepared on quartz by pyrolysis of alginate or chitosan adsorbing Sb(OAc)(3). XPS shows that the prevalent Sb oxidation state is +III, while thermoprogrammed CO2 desorption shows that these films exhibit basic sites. These thin films have used as basic catalysts to promote the Michael addition of active methylene compounds and the Henry condensation. These results have been rationalized by DFT calculations that have shown that undercoordinated or two-fold coordinated oxygen atoms on SbOx clusters can act as basic sites, providing a wide range of basic strength. (c) 2020 Elsevier Inc. All rights reserved., This work was supported by UEFISCDI (PN-III-P4-ID-PCE-2016-0146, nr. 121/2017 and project number PN-III-P1-1.1-TE-2016-2191, nr. 89/2018) and by the Spanish Ministry of Science and Innovation (Severo Ochoa and RTI2018-890237-CO2-1).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Propylene epoxidation with in situ generated H2O2 in supercritical conditions

  • Prieto Arnal, Alejandro
  • Palomino Roca, Miguel|||0000-0003-2983-1038
  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Several bi-functional materials based on palladium nanoparticles supported onto nanocrystalline tita-nium silicalite zeolite (Pd@TS-1) were prepared and used as active and reusable catalysts to direct POproduction from hydrogen, oxygen and propylene through one-pot two-step combined process. Thistype of catalysts was able to carry out the consecutive process where palladium nanoparticles catalyzed the formation of H2O2that was used as intermediate reagent for propylene epoxidation catalyzed byTS-1 nanocrystals, used as supporting active matrix. Influence of supercritical CO2conditions in batch reactions was evaluated together with the associated effect due to the presence of platinum promoters (Pd(Pt)@TS-1). Other reaction parameters were also considered, such as palladium loading, use of acid-ity inhibitors and modification of H2/O2/C3ratio. Reusability studies showed the high stability of thec atalysts in consecutive catalytic cycles, their regeneration being possible., The research leading to these results has received funding from European Community's Seventh Framework Program, through the Collaborative Project INCAS, Contract Nr. NMP2-LA-2010-245988. AP and UD thank additional funds from Spanish Government (MAT2011-29020-C02-01, Consolider-Ingenio MULTICAT C5D2009-00050
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Drug-DNA complexation as the key factor in photosensitized thymine dimerization

  • Cuquerella Alabort, Maria Consuelo
  • Miranda Alonso, Miguel Ángel
  • Lhiaubet, Virginie Lyria|||0000-0002-8205-8892
  • Bosca Mayans, Francisco
[EN] The crucial role of photosensitizer@DNA complexation in the formation of cyclobutane pyrimidine dimers (CPDs) has been demonstrated using femtosecond and nanosecond transient absorption and emission measurements in combination with in vitro DNA damage assays. This finding opens the door to re-evaluate the mechanisms involved in CPDs photosensitized by other chemicals., Spanish Government (CTQ2014-54729-C2-2-P, CTQ2015-70164-P and Severo Ochoa program/SEV-2012-0267) and Generalitat Valenciana (Prometeo II program) are gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Advances in the synthesis of titanosilicates: From the medium pore TS-1 zeolite to highly-accessible ordered materials

  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] In the present review, we would like to cover the most fundamental advances achieved in the design of ordered titanosilicates since the earlier discovery of TS-1 reported by EniChem in the mid-eighties. The invention of the medium-pore TS-1 zeolite was a breakthrough, and this material has been applied as efficient catalyst in diverse industrial applications. However, its limited pore size (5 5.5 Å) offers diffusion limitations when working with large molecules. The design and preparation of open titanosilicates, such as large pore molecular sieves, mesoporous ordered materials, or layered-type zeolites will be described. The applicability of these titanosilicates to catalytic oxidation processes requiring bulky organic molecules will also be presented., This work has been supported by the Spanish GovernmentMINECO (MAT2012-37160), Consolider Ingenio 2010-Multicat, and UPV through PAID-06-11 (n.1952). Manuel Moliner also acknowledges to ‘‘Subprograma Ramon y Cajal’’ for the contract RYC-2011-08972. ITQ thanks the ‘‘Program Severo Ochoa’’ for financial support (SEV 2012 0267).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Opportunities in upgrading biomass crudes

  • Mathieu, Yannick
  • Humphreys, Len
  • Rowlands, William
  • Maschmeyer, T.
  • Sauvanaud, Laurent L.A.|||0000-0002-0274-2740
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] An unconventional crude from biomass (biocrude) has been processed to yield a hydrocarbon stream that is not only fully processable in conventional refineries but is already close to the specification of commercial fuels such as transportation diesel. The upgrading of biocrude was carried out with a combination of hydrotreatment and catalytic cracking, yielding middle distillate as the main product., The authors thank Licella for material and financial support, as well as providing the biocrude used for the hydrotreating experiments. Licella gratefully acknowledges support from the Australian Government in the form of funding as part of the Advanced Biofuels Investment Readiness Program, received through the Australian Renewable Energy Agency (ARENA). Financial support by the Spanish Government-MINECO through program "Severo Ochoa" (SEV 2012-0267), CTQ2015-70126-R (MINECO/FEDER), and by the Generalitat Valenciana through the Prometeo program (PROMETEOII/2013/011) is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Carbon-Carbon Bond Formation and Hydrogen Production in the Ketonization of Aldehydes

  • Orozco Arboleda, Lina Marcela
  • Renz, Michael|||0000-0002-1101-9562
  • Corma Canós, Avelino|||0000-0002-2232-3527
Aldehydes possess relatively high chemical energy, which is the driving force for disproportionation reactions such as Cannizzaro and Tishchenko reactions. Generally, this energy is wasted if aldehydes are transformed into carboxylic acids with a sacrificial oxidant. Here, we describe a cascade reaction in which the surplus energy of the transformation is liberated as molecular hydrogen for the oxidation of heptanal to heptanoic acid by water, and the carboxylic acid is transformed into potentially industrially relevant symmetrical ketones by ketonic decarboxylation. The cascade reaction is catalyzed by monoclinic zirconium oxide (m-ZrO2). The reaction mechanism has been studied through cross-coupling experiments between different aldehydes and acids, and the final symmetrical ketones are formed by a reaction pathway that involves the previously formed carboxylic acids. Isotopic studies indicate that the carboxylic acid can be formed by a hydride shift from the adsorbed aldehyde on the metal oxide surface in the absence of noble metals., The authors thank MINECO (CTQ2015-67591-P, Consolider Ingenio 2010-MULTICAT and Severo Ochoa program, SEV-2012-0267) and Generalitat Valenciana (PROMETEO II/2013/011 Project) for funding this work. L.M.O. is grateful to the COLCIENCIAS institute for a Francisco-Jose-de-Caldas (512/2010) doctoral fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photoactive bile salts with critical micellar concentration in the micromolar range

  • Gómez Mendoza, Miguel
  • Miranda Alonso, Miguel Ángel
  • Marín García, Mª Luisa|||0000-0002-9789-8894
The aggregation behavior of bile salts is strongly dependent on the number of hydroxyl groups. Thus, cholic acid (CA), with three hydroxyls, starts forming aggregates at 15 mM, while deoxycholic, chenodeoxycholic or ursodeoxycholic acids, with two hydroxyls, start aggregating at 5-10 mM; for lithocholic acid, with only one hydroxyl group, aggregation is observed at lower concentration (2-3 mM). Here, the singular self-assembling properties of dansyl and naproxen derivatives of CA (3 beta-Dns-CA and 3 beta-NPX-CA, respectively) have been demonstrated on the basis of their photoactive properties. Thus, the emission spectra of 3 beta-Dns-CA registered at increasing concentrations (25-140 mu M) showed a remarkable non-linear enhancement in the emission intensity accompanied by a hypsochromic shift of the maximum and up to a three-fold increase in the singlet lifetime. The inflection point at around 50-70 mu M pointed to the formation of unprecedented assemblies at such low concentrations. In the case of 3 beta-NPX-CA, when the NPX relative triplet lifetime was plotted against concentration, a marked increase (up to two-fold) was observed at 40-70 mu M, indicating the formation of new 3 beta-NPX-CA assemblies at ca. 50 mu M. Additional evidence supporting the formation of new 3 beta-Dns-CA or 3 beta-NPX-CA assemblies at 40-70 mu M was obtained from singlet excited state quenching experiments using iodide. Moreover, to address the potential formation of hybrid assemblies, 1 : 1 mixtures of 3 beta-Dns-CA and 3 beta-NPX-CA (2-60 mu M, total concentration) were subjected to steady-state fluorescence experiments, and their behavior was compared to that of the pure photoactive derivatives. A lower increase in the emission was observed for 3 beta-NPX-CA in the mixture, while a huge increase was experienced by 3 beta-Dns-CA in the same concentration range (up to 60 mu M total). A partial intermolecular energy transfer from NPX to Dns, consistent with their reported singlet energies, was revealed, pointing to the formation of extremely fluorescent hybrid assemblies at 5-10 mu M (total concentration). The morphology of the entities was investigated by means of confocal microscopy. At 90 mu M, 3 beta-Dns-CA showed disperse assemblies in the mu m range., Financial support from the Spanish Government (Grants SEV-2012-0267 and CTQ2012-38754-C03-03) and the Generalitat Valenciana (Prometeo Program) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Conversion of Levulinic acid into chemicals: Synthesis of biomass derived levulinate esters over Zr-containing MOFs

  • García Cirujano, Francisco
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
Zr-containing metal-organic frameworks (MOFs) formed by either terephthalate (UiO-66) or 2-aminoterephthalate ligancls (UiO-66-NH2) are active and stable catalysts for the acid catalyzed esterification of levulinic acid with EtOH, n-BuOH and long-chain biomass derived alcohols, with activities comparable (in some cases superior) to other solid acid catalysts previously repotted. The effect of functional group substitution at the ligand benzene ring, alcohol chain length, particle size and contents of defects on the catalytic activity of the MOFs are studied in detail. In UiO-66-NH2, a dual acid-base activation mechanism is proposed, in which levulinic acid is activated on Zr sites and the alcohol at the amino groups of the ligand. Large variations of the catalytic activity from batch to batch suggest that the active sites are located at defect positions associated to ligand deficiency of the solid. Particle size seems to have a minor impact only in UiO-66-NH2, in which diffusion of levulinic acid is somehow hindered due to the amino groups present in the linkers., Financial support from the Consolider-Ingenio 2010 (project MULTICAT, CSD-2009-0050), the SEVER OCHOA program (project SEV-2012-0267), and the Spanish Ministry of Science and Innovation (project MAT2011-29020-C02-01) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Repair of a Dimeric Azetidine Related to the Thymine-Cytosine (6-4) Photoproduct by Electron Transfer Photoreduction

  • Fraga Timiraos, Ana Belén
  • Miranda Alonso, Miguel Ángel
  • Lhiaubet, Virginie Lyria|||0000-0002-8205-8892
[EN] Photolyases are intriguing enzymes that take advantage of sunlight to restore lesions like cyclobutane pyrimidine dimers or (6-4) photoproducts. This work focused on the photoreductive process responsible for splitting of the azetidine ring proposed to occur during (6-4) photoproduct repair at a thymine-cytosine sequence. A model compound formed by photocycloaddition between thymine and 6-azauracil has been designed to mimic the elusive azetidine intermediate. The photoinduced electron transfer process has been investigated by means of steady-state and time-resolved fluorescence using photosensitizers with oxidation potentials in the singlet excited state ranging from -3.3 to -2.1V vs. SCE. Azetidine ring splitting and recovery of repaired bases were proven by HPLC analysis., The Spanish Government (CTQ2012-32621, CTQ2015-70164-P, RIRAAF RETICS RD12/0013/0009, Severo Ochoa program/SEV-2012-0267 and SVP-2013-068057 for A.B.F.-R. grant) and the Generalitat Valenciana (Prometeo II/2013/005) are gratefully acknowledged. We are indebted to Dr. G. Sastre for his collaboration in the mathematical treatment of some experimental results.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of highly stable metal-containing extra-large-pore molecular sieves

  • Martínez Franco, Raquel
  • Paris, Cecilia|||0000-0002-5673-8114
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The isomorphic substitution of two different metals (Mg and Co) within the framework of the ITQ-51 zeotype (IFO structure) using bulky aromatic proton sponges as organic structure-directing agents (OSDAs) has allowed the synthesis of different stable metal-containing extra-large-pore zeotypes with high pore accessibility and acidity. These metal-containing extra-large-pore zeolites, named MgITQ-51 and CoITQ-51, have been characterized by different techniques, such as powder X-ray diffraction, scanning electron microscopy, energy dispersive X-ray spectrometry, UV-Vis spectroscopy, temperature programmed desorption of ammonia and Fourier transform infrared spectroscopy, to study their physico-chemical properties. The characterization confirms the preferential insertion of Mg and Co atoms within the crystalline structure of the ITQ-51 zeotype, providing high Bronsted acidity, and allowing their use as efficient heterogeneous acid catalysts in industrially relevant reactions involving bulky organic molecules., Financial support by the Spanish Government-MINECO through 'Severo Ochoa' (SEV 2012-0267), Consolider Ingenio 2010-Multicat and MAT2012-37160 is acknowledged. The European Union is also acknowledged by the SynCatMatch project (ERC-AdG-2014-671093).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hydrothermal stability and catalytic performance of desilicated highly siliceous zeolites ZSM-5

  • Tarach, Karolina A.
  • Góra-Marek, Kinga
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • Rey Garcia, Fernando|||0000-0003-3227-5669
Highly siliceous zeolites, namely MFI type have attracted the great attention due to their higher hydrothermal stability, higher selectivity to organic compounds, and often better catalytic properties in comparison with Al-rich zeolites. The native zeolite (Si/Al = 164) and its desilicated analogues were deeply characterized with regard to their structural and textural properties by X-ray diffraction, low temperature adsorption of nitrogen and solid-state Al-27 MAS NMR. Their acidic properties were evaluated in quantitative IR studies. Finally, the catalytic performance of desilicated zeolites ZSM-5 was evaluated in the cracking of n-decane, 1,3,5-tri-iso-propylbenzene and vacuum gas oil. In this article, it is shown that high silica zeolites prepared by NaOH and NaOH&TBAOH leaching presented good hydrothermal stability with only slightly lower resistance when comparing to native steamed zeolite. The mesoporosity was preserved after the steaming treatment. The influence of the generated mesoporosity on the higher activity was evidenced in both 1,3,5-tri-isopropylbenzene and diesel oil cracking of steamed hierarchical zeolites. In spite of their lowered acidity, the mesopores system benefited the diffusion of the bulky molecule and finally provided higher activity of hierarchical zeolites. (C) 2016 Elsevier Inc. All rights reserved., This work was financed by Grant No. 2015/18/E/ST4/00191 from the National Science Centre - Poland. F. Rey and J. Martinez-Triguero thank for the support of the Spanish Government-MINECO through "Severo Ochoa" (SEV 2012-0267), MAT2015-71842-P and CTQ2015-68951-C3-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Solid state transport and hydrogen permeation in the system Nd5.5W1-xRexO11.25-d

  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Somacescu, Simona
Nd5.5WO11.25-delta is a mixed proton-electron conducting oxide, which shows an important mixed conductivity and stability in moist CO2 environments. However, the H-2 fluxes obtained with this material are not high enough in order to apply them as H-2 separation membranes in industrial applications. Re6+ cation presents similar ionic radii than W6+ and Re6+ can be reduced to different oxidation states under the operating conditions typical for hydrogen membrane separation. This fact leads to the improvement of the electronic conductivity and produce. the generation of oxygen vacancies with the subsequent increase in the ionic conductivity. This work presents the synthesis as nanosized powders as well as the structural and electrochemical characterization of mixed conducting materials based on the system Nd5.5W1-xRexO11.25-delta where x = 0, 0.1, 0.5 and 1. The evolution of the crystalline structure and the shrinkage behavior are studied as a function of the sintering temperature. Total conductivity in reducing and oxidizing environments is studied systematically for samples sintered at 1350 degrees C. The H/D isotopic effect and the hydration influence are also analyzed by means of DC-electrochemical measurements. H-2 permeation is carried out for the selected compound, Nd5.5W0.5Re0.5O11.25-delta, in the range of 700-1000 degrees C, obtaining a peak H-2 flux value of 0.08 mL.min(-1).cm(-2). The reduction of the Re cation in this compound under reducing conditions is investigated by TPR and XPS. Finally, the stability of this material under CO2-rich gas stream was evaluated by measuring H-2 permeation using a CO2 containing atmosphere as sweep gas., Financial support by the Spanish Government (Grant Nos. JAE-Pre 08-0058, ENE2011-24761, CSD-2009-0050, and SEV-2012-0267) and the Helmholtz Association of German Research Centers through the portfolio topic MEM-BRAIN is kindly acknowledged. The authors are indebted to S. Jimenez for sample preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Partially oxidized gold nanoparticles: a catalytic base-free system for the aerobic homocoupling of alkynes

  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Leyva Perez, Antonio|||0000-0003-1063-5811
  • Oliver-Meseguer, Judit|||0000-0003-1555-3583
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Laursen, Siris Odin
  • Cómbita Merchán, Diego Fernando
The mechanism of alkyne homocoupling over gold nanoparticles and clusters, isolated and supported on CeO2, has been theoretically investigated by means of periodic DFT calculations. The theoretical study indicates that O2 dissociation on gold generates basic O atoms able to abstract the proton of the alkyne, and cationic Aud+ and Au+ species that decrease the activation barrier for the CAC bond forming step. Kinetic results show that the base-free homocoupling of alkynes is effectively catalyzed by gold nanoparticles supported on different solids, and confirm the theoretical prediction, Financial support from Spanish MCIINN (Consolider Ingenio 2010-MULTICAT CSD2009-00050 and Subprograma de apoyo a Centros y Universidades de Excelencia Severo Ochoa SEV 2012 0267 Projects) is acknowledged. Red Espanola de Supercomputacion (RES) and Centre de Calcul de la Universitat de Valencia are gratefully acknowledged for computational facilities and technical assistance. A.L.-P. and J.O.-M. also thank ITQ for a contract.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Trends in the Reactivity of Molecular O-2 with Copper Clusters: Influence of Size and Shape

  • Fernandez, Estefania
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
The adsorption and dissociation of molecular O-2 on copper clusters of varying size and morphology (Cur with n = 3-8, 13, and 38 atoms) has been systematically investigated using several DFT approaches. Different modes of adsorption of molecular O-2 are found for each atomicity of the copper clusters, with their relative stability depending on the cluster morphology: bridge conformations are stabilized on planar clusters, while hollow h-100 and h-111 modes are preferentially formed on 3D clusters. O-2 adsorption energies correlate with the HOMO energy of the isolated copper clusters but not with their atomicity. On the other hand, the degree of activation of the O-O bond, and therefore the activation energy barrier necessary to break it, depends on the charge transferred to the lc* MO of O-2, which in turn is determined by the mode of adsorption of O-2 on the metal. Cluster morphology appears then as the key factor determining the catalytic activity of copper, since the most activating h-111 and h-100 adsorption modes leading to lower barriers are preferentially stabilized on 3D clusters, no matter their size. All computational levels considered, including periodic and molecular calculations, lead to similar trends and conclusions., The authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness (MINECO) through the Severo Ochoa program (SEV-2012-0267) and operating grant Consolider Ingenio Multicat CSD-2009-00050, as well as Generalitat Valenciana through PROMETEOII/2013/011 Project. Red Espanola de Supercomputacion (RES) and Centre de Calcul de la Universitat de Valencia are gratefully acknowledged for computational facilities and technical assistance. E.F.V. thanks Spanish MINECO for her fellowship SVP-2013-068146.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Spin-Crossover Modification through Selective CO2 Sorption

  • Gimenez-Marques, M.
  • Minguez Espallargas, G.
  • Coronado, E.
  • Vitorica-Yrezabal, I.
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] We present a spin-crossover Fe-II coordination polymer with no permanent channels that selectively sorbs CO2 over N-2. The one-dimensional chains display internal voids of similar to 9 angstrom diameter, each being capable to accept one molecule of CO2 at 1 bar and 273 K. X-ray diffraction provides direct structural evidence of the location of the gas molecules and reveals the formation of O=C=O(delta(-))center dot center dot center dot pi interactions. This physisorption modifies the spin transition, producing a 9 K increase in T-1/2., The work was supported by the EU (Advanced ERC Grant SPINMOL and FP7 Project HINTS), the Spanish MINECO (Project Consolider-Ingenio in Molecular Nanoscience, CSD2007-00010; projects MAT2007-61584, MAT2011-22785 and CTQ2011-26507 co-financed by FEDER, and MAT2012-38567-C02-01 and Severo Ochoa SEB-2012-0267), the Generalitat Valenciana (Prometeo and ISIC Programs), and the VLC/Campus Program. M.G.-M. thanks MINECO for a predoctoral grant. We also acknowledge J. M. Martinez-Agudo and G. Agusti (ICMol) and A. Vidal and M. Palomino (ITQ) for their help with the magnetic and sorption measurements, respectively. We thank L. Brammer (U. Sheffield) for useful discussions, Diamond Light Source for access to beamline I11, and S. Thompson for assistance with experiments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Conversion of methanol to olefins: Stabilization of nanosized SAPO-34 by hydrothermal treatment

  • Li, Zhibin
  • Yu, Jihong
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • Corma Canós, Avelino|||0000-0002-2232-3527
Nano-SAPO-34 zeolite catalyst (20 nm crystal size) has been stabilized by hydrothermal treatment. After steamed at high temperatures (T >= 550 degrees C), its textural properties and high lifetime during the reaction of methanol to olefins (MTO) are preserved, despite the decrease in acidity, even after months of contact with moisture. The stabilization effect is attributed to the migration of silicon to larger silicon islands in which the contribution of silicon on the edge is lower after steaming. Stabilization is not successful by a thermal treatment in air in the absence of water. Steaming at temperature >400 degrees C is required for achieving hydrothermal stabilization. A stability test for SAPO-34 in MTO reaction is proposed. (C) 2015 Elsevier Inc. All rights reserved., Financial support by the Spanish MINECO (Consolider Ingenio 2010-MULTICAT CSD2009-00050, MAT2012-37160, CTQ2012-37925-C03-1, Severo Ochoa SEV-2012-0267), and Generalitat Valenciana by the PROMETEO program (PROMETEOII/2013/011) is acknowledged. Z. Li acknowledges China Scholarship Council (CSC) for a fellowship. J. Yu thanks the Major International Joint Research Project of China for financial supports (Grant No. 21320102001). Support from Servicio de Microscopia Electronica (UPV) is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Direct detection of the triphenylpyrylium-derived short-lived intermediates in the photocatalyzed degradation of acetaminophen, acetamiprid, caffeine and carbamazepine

  • Martínez-Haya, Rebeca
  • Gomis Vicens, Juan
  • Miranda Alonso, Miguel Ángel
  • Arqués Sanz, Antonio|||0000-0001-8692-6979
  • Amat Payá, Ana María|||0000-0003-4218-2685
  • Marín García, Mª Luisa|||0000-0002-9789-8894
[EN] Advanced oxidation processes are useful methodologies to accomplish abatement of contaminants; however, elucidation of the reaction mechanisms is hampered by the difficult detection of the short-lived primary key species involved in the photocatalytic processes. Nevertheless, herein the combined use of an organic photocatalyst such as triphenylpyrylium (TPP+) and photophysical techniques based on emission and absorption spectroscopy allowed monitoring the photocatalyst-derived short-lived intermediates. This methodology has been applied to the photocatalyzed degradation of different pollutants, such as acetaminophen, acetamiprid, caffeine and carbamazepine. First, photocatalytic degradation of a mixture of the pollutants showed that acetaminophen was the most easily photodegraded, followed by carbamazepine and caffeine, being the abatement of acetamiprid almost negligible. This process was accompanied by mineralization, as demonstrated by trapping of carbon dioxide using barium hydroxide. Then, emission spectroscopy measurements (steady-state and time-resolved fluorescence) allowed demonstrating quenching of the singlet excited state of TPP+. Laser flash photolysis experiments with absorption detection showed that oxidation of contaminants is accompanied by TPP+ reduction, with formation of a pyranyl radical (TPP center dot), that constituted a fingerprint of the redox nature of the occurring process. The relative amounts of TPP center dot detected was also correlated with the efficiency of the photodegradation process., Financial support from Spanish Government (Grants SEV-2016-0683, CTQ2012-38754-C03-02 and CTQ2015-69832-C4-4-R) and Generalitat Valenciana (Prometeo Program) is gratefully acknowledged. R. Martinez-Haya thanks financial support from Spanish Government (Grant SEV-2012-0267).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

alpha,beta-Enone Borylation by Bis(Pinacolato)Diboron Catalyzed by Cu-3(BTC)(2) Using Cesium Carbonate as a Base

  • Dhakshinamoorthy, Amarajothi
  • Asiri, Abdullah M.
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Cu-3(BTC)(2) (BTC: 1,3,5-benzenetricarboxylate) as a heterogeneous catalyst in the presence of cesium carbonate as a base is reported for the borylation of alpha,beta-conjugated enones by bis(pinacolato)diboron (B(2)pin(2)). According to the hot-filtration test, Cu-3(BTC)(2) is acting as a heterogeneous catalyst. Further, Cu-3(BTC)(2) exhibits a wide substrate scope and can be reused in consecutive runs, maintaining a crystal structure as evidenced by powder X-ray diffraction (XRD). A suitable mechanism is also proposed for this transformation using Cu-3(BTC)(2) as catalyst., Financial support by the Spanish Ministry of Economy and Competitiveness (Severo Ochoa and RTI2018-089231-CO2-R1) and Generalitat Va-lenciana (Prometeo 2017-083).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Oxidatively Generated Lesions as Internal Photosensitizers for Pyrimidine Dimerization in DNA

  • Aparici-Espert, Maria Isabel
  • García-Laínez, G.
  • Miranda Alonso, Miguel Ángel
  • Andreu, Inmaculada|||0000-0003-3409-9443
  • Lhiaubet, Virginie Lyria|||0000-0002-8205-8892
[EN] In this work, the attention is focused on UVA-photosensitized reactions triggered by a DNA chromophore-containing lesion, namely 5-formyluracil. This is a major oxidatively generated lesion that exhibits an enhanced light absorption in the UVB-UVA region. The mechanistic study combining photochemical and photobiological techniques shows that irradiation of S-formyluracil leads to a triplet excited state capable of sensitizing formation of cyclobutane pyrimidine dimers in DNA via a triplet-triplet energy transfer. This demonstrates for the first time that oxidatively generated DNA damage can behave as an intrinsic sensitizer and result in an important extension of the active fraction of the solar spectrum with photocarcinogenic potential. Overall, this raises the question of an aggravated photomutagenicity of the 5-formyluracil lesion., The present work was supported by Spanish Government (CTQ2015-70164-P, Severo Ochoa program/SEV-2012-0267, BES-2013-066566, CSIC 2016801007), Instituto de Salud Carlos III (RD16/0006/0030, FIS PI16/01877), Generalitat Valenciana (Prometeo/2017/075).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Oxygen permeation improvement under CO2-rich environments through catalytic activation of hierarchically-structured perovskite membranes

  • Gaudillere, Cyril Christian
  • García Fayos, Julio
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Catalytic activation of a highly porous La0.6Sr0.4Co0.2Fe0.8O3- (LSCF) freeze-cast asymmetric membrane has been realized by screen-printing a 30m thick LSCF porous layer over the dense top layer of the asymmetric membrane. Membrane activation leads to a noticeable improvement of the oxygen permeation flux (JO(2)) in the low-temperature region (<700 degrees C), at which catalytic gas exchange is the most limiting process. An enhancement of 54% in JO(2) is obtained (JO(2)=0.17mLmin(-1)cm(-2)) in air at 600 degrees C thanks to the addition of the LSCF catalytic porous layer, whereas the maximum oxygen permeation is reached when pure oxygen is fed to the membrane at 1000 degrees C with a high value of 16.3mLmin(-1)cm(-2). The most appealing effect of the catalytic layer is its protective feature under oxycombustion conditions, that is, under a CO2-rich atmosphere at high temperature. Indeed, the oxygen permeation drop in the presence of CO2 is significantly lower in the presence of a catalytic porous layer. Interestingly, the full recovery of JO(2) flux after CO2 removal in the sweep flux evidences the absence of a carbonation process. Finally, the stability of the functionalized membrane was evaluated at 850 degrees C and under a 50% CO2-containing atmosphere; this revealed a linear degradation rate for oxygen permeation of 4.27x10(-2)mLmin(-1)cm(-2) per day., Funding from the Spanish Government (ENE2011-24761 and SEV-2012-0267 grants) and EC (FP7 GREEN-CC Grant Agreement 608524) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dandelion-Like Microspherical MCM-22 Zeolite Using BP 2000 as a Hard Template

  • Schwanke, Anderson
  • Villarroel-Rocha, Jhonny
  • Sapag, Karim
  • Pergher, Sibele
  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The chemistry between layered MWW zeolite and carbon black pearls (BP 2000) as an inexpensive hard template was investigated to develop a rational one-pot synthesis of MCM-22 microspheres. The characterization results showed that the insertion of BP 2000 in the gel synthesis did not substantially compromise the crystallinity and microporosity, and the microscopic analyses showed that BP 2000 played a key role in controlling the final morphology of the MCM-22 zeolite, creating beautiful dandelion-like microspherical particles. The morphology obtained is due to the tortuous shape of the hard template, the particular MWW particle crystals, the interaction with the external surface of the MWW zeolitic precursor, and the synthesis conditions. The stacking of MWW crystals with edge-to-face orientations generates meso-/macrovoids, allowing access to the interiors of the microspheres. The microspheres were homogeneous with sizes ranging from 6 to 8 mu m with an increase of the external surface and a macroporous size distribution centered at 200 nm, which is two times that of the traditional MCM-22 zeolite, A.J.S. is grateful to the CAPES Foundation and PDSE program (process number 99999.004779/2014-02) from the Ministry of Education of Brazil. U.D. and A.C. acknowledge funding by the Spanish Government (Severo Ochoa program SEV-2012-0267 and MAT2014-52085-C2-1-P) and the Generalitat Valenciana (Prometeo). The European Union is also acknowledged by ERC-AdG-2014-671093-SynCatMatch. S.P. and K.S. acknowledge the CAPES-CAFP project number 054/14.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photocatalytic production of hydrogen from biomass-derived feedstocks

  • Puga, Alberto V.
[EN] The application of photocatalysis for the utilisation of sunlight energy is intensely investigated in present times, particularly in prospect of generating solar fuels by hydrogen production or CO2 reduction processes as tools for societies aiming to relief their thirst for fossil resources. From the perspective of sustainability, the rational use of biomass-derived feedstocks for photocatalytic H2 production is a feasible, proven and highly efficient process. In this review, in addition to delving into physico-chemical fundamentals of photocatalytic processes on semiconductors, the research activity on this topic related to the design of revolutionary semiconductor-based materials, generally including metallic nanoparticles or complexes as hydrogen-evolving co-catalysts, is outlined and critically evaluated. Moreover, the use of sunlight and renewable feedstocks for the generation of hydrogen, as a compelling opportunity for the energy sector, is emphasised. Special focus is also set on the valorisation of biorefinery products, agricultural residues and industrial or municipal waste., Financial support from the Spanish Government-MINECO through "Severo Ochoa" (SEV 2012-0267) is acknowledged. The European Union is also acknowledged for the SynCatMatch project (ERC-AdG-2014-671093).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The acid-base and redox reactivity of CeO2 nanoparticles: Influence of the Hubbard U term in DFT plus U studies

  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • López Auséns, Javier Tirso
[EN] The interaction of small molecules with acid-base and redox centers in small Ce21O42 nanoparticles has been theoretically investigated using the DFT + U approach with the PW91 functional and U = 0.2 and 4 eV, in order to determine the influence of the U value on the trends observed in selected properties describing such interactions. CO adsorption at low coordinated Ce4+ Lewis acid centers, water adsorption and dissociation at acid-base pairs, formation of oxygen vacancy defects by removal of an oxygen atom from the system, and interaction of molecular O-2 with such defects have been considered. The largest effect of the value of U is found for the description of the reduced Ce21O41 nanoparticle. In all other cases involving stoichiometric and oxidized Ce21O42 and Ce21O43 systems, the trends in the calculated adsorption and reaction energies, optimized geometries, charge distribution, and vibrational frequencies are quite similar at the three levels considered., Financial support from the Spanish Science and Innovation Ministry (Consolider Ingenio 2010-MULTICAT CSD2009-00050 and Subprograma de apoyo a Centros y Universidades de Excelencia Severo Ochoa SEV 2012 0267) is acknowledged. The European Union is also acknowledged by ERC-AdG-2014-671093 — SynCatMatch. Red Española de Supercomputación (RES) and Centre de Càlcul de la Universitat de València are gratefully acknowledged for computational facilities and technical assistance. T. L.-A. thanks ITQ for a contract. We thank Konstantin Neyman for providing the Ce21O42 nanoparticle model.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Stimuli-responsive hybrid materials: breathing in magnetic layered double hydroxides induced by a thermoresponsive molecule

  • Abellán Sáez, Gonzalo
  • Varela , Maria
  • Jaafar, Miriam
  • Gomez-Herrero, Julio
  • Zamora, Felix
  • Ribera, Antonio
  • Coronado, Eugenio
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] A hybrid magnetic multilayer material of micrometric size, with highly crystalline hexagonal crystals consisting of CoAl-LDH ferromagnetic layers intercalated with thermoresponsive 4-(4-anilinophenylazo)benzenesulfonate (AO5) molecules diluted (ratio 9 : 1) with a flexible sodium dodecylsulphate (SDS) surfactant has been obtained. The resulting material exhibits thermochromism attributable to the isomerization between the azo (prevalent at room temperature) and the hydrazone (favoured at higher temperatures) tautomers, leading to a thermomechanical response. In fact, these crystals exhibited thermally induced motion triggering remarkable changes in the crystal morphology and volume. In situ variable temperature XRD of these thin hybrids shows that the reversible change into the two tautomers is reflected in a shift of the position of the diffraction peaks at high temperatures towards lower interlayer spacing for the hydrazone form, as well as a broadening of the peaks reflecting lower crystallinity and ordering due to non-uniform spacing between the layers. These structural variations between room temperature (basal spacing (BS) = 25.91 angstrom) and 100 degrees C (BS = 25.05 angstrom) are also reflected in the magnetic properties of the layered double hydroxide (LDH) due to the variation of the magnetic coupling between the layers. Overall, our study constitutes one of the few examples showing fully reversible thermo-responsive breathing in a 2D hybrid material. In addition, the magnetic response of the hybrid can be modulated due to the thermotropism of the organic component that, by influencing the distance and in-plane correlation of the inorganic LDH, modulates the magnetism of the CoAl-LDH sheets in a certain range., Financial support from the EU (SpinMol Advanced Grant ERC-2009-AdG-20090325 and ERC Starting Investigator Award STEMOX#239739), the Spanish Ministerio de Economia y Competitividad (Projects with FEDER cofinancing MAT2011-22785, MAT2012-38567-C02-01, MAT2013-46753-C2, CTQ-2011-26507, Consolider-Ingenio 2010-Multicat CSD2009-00050, and Severo Ochoa Program SEV-2012-0267), Generalitat Valenciana (PROMETEO and ISIC-Nano programs), and VLC/Campus Microcluster "Functional Nanomaterials and Nanodevices" is gratefully acknowledged. This work was sponsored by US Department of Energy, Office of Science, Basic Energy Sciences, Materials Sciences and Engineering Division (M.V.). G. A. thanks the EU for a Marie Curie Fellowship (FP7/2013-IEF-627386). P. A. thanks the Spanish MINECO for a Ramon y Cajal Fellowship. We also acknowledge J. A. Carrasco for his help with the experimental work, and J. M. Martinez and G. Agusti for magnetic measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

One-pot synthesis of nano-crystalline MCM-22

  • Tempelman, Christiaan H. L.
  • Portilla Ovejero, Mª Teresa
  • Martínez Armero, Marta Evelia
  • Mezari, Brahim
  • de Caluwe, Niek G. R.
  • Hensen, Emiel J. M.
  • Martínez, Cristina|||0000-0002-4415-084X
[EN] Nano-crystalline MCM-22 zeolite was synthesized in a one-pot procedure by the use of an organosilane (dimethyl-octadecyl-(3-trimethoxysilylpropyl)-ammonium chloride, TPOAC) in the zeolite synthesis gel. This crystal growth inhibition procedure introduced mesopores in the MCM-22 crystallites. The lower mechanical stability of the nano-crystalline MCM-22 zeolite compared with bulk MCM-22 can be countered to some extent by pillaring. The increased external surface of the microporous zeolite domains resulted in increased accessibility of the Bronsted acid sites, as followed from the better performance in liquid-phase benzene alkylation with propylene as compared with bulk MCM-22. The increased accessibility of the internal acid sites in Mo-loaded hierarchical MCM-22 was also evident from the improved benzene selectivity during methane aromatization. Silylation of hierarchical Mo/MCM-22 was detrimental for the catalytic performance in MDA. The nano-crystalline MCM-22 has physico-chemical and catalytic properties intermediate between those of MCM-22 and ITQ-2 with the benefit over ITQ-2 that it can be synthesized in a single step. (C) 2015 Elsevier Inc. All rights reserved., Funding from the 7th Framework Program of the European Commission through the Collaborative Project Next-GTL (agreement no 229183) and financial support by the Spanish Government-MINECO through "Severo Ochoa" (SEV 2012-0267), Consolider Ingenio 2010-Multicat (CSD2009-00050) and MAT2012-31657 are acknowledged. Marta E. Martinez Armero thanks MINECO for economical support through pre-doctoral fellowship for doctors training (BES-2013-066800). The authors thank B. Esparcia for technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient synthesis of the Cu-SSZ-39 catalyst for DeNOx applications

  • Martin, Nuria
  • Boruntea, Cristian-Renato
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
By using a faujasite zeolite as the sole Si and Al source with simple ammonium cyclic cations, it has been possible to synthesize the SSZ-39 zeolite with high yields, and to prepare a catalyst for potential industrial applications in the SCR of NOx., Financial support from the Spanish Government-MINECO through "Severo Ochoa'' (SEV 2012-0267), Consolider Ingenio 2010-Multicat, MAT2012-37160 and, Intramural-201480I015 is acknowledged. C. R. B. thanks the Danish Agency for Science Technology and Innovation for a PhD scholarship. The authors thank Isabel Millet for technical support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Screening of hypothetical metal-organic frameworks for H2 storage

  • Gomez, Diego Armando
  • Toda-Calderón, Jordi
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
[EN] Computational screening throughout a database containing similar to 138000 metal-organic frameworks (MOFs) has been performed to select candidate structures for hydrogen storage. A total of 231 structures (of which 79 contain paddle-wheel units) have been selected that meet the gravimetric and volumetric targets at 100 atm and 77 K. Grand Canonical Monte Carlo simulations have been performed to calculate the isotherms and select structures which meet the targets at 50 atm, and also to check the adsorption in the low pressure regime (1 atm). From this a reduced set of 18 structures has been analysed in more detail, regarding not only gravimetric and volumetric uptake but also pore size distribution and pore volume. A few structures with 3% gravimetric uptake at 1 atm and 77 K perform at the best level found so far., We thank Ministerio de Ciencia e Innovacion of Spain for funding through projects MAT2007-64682, the excellence programme Severo Ochoa (SEV-2012-0267), and the SVP-2013-067662 PhD scholarship to J.T. We thank Centro de Calculo (UPV) and Area de Informatica Cientifica (SGAI-CSIC) for computational facilities. Prof. Randall Q. Snurr and Dr. Christopher E. Wilmer are gratefully acknowledged for useful discussions and for making available their MOF database.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Spectroscopic, calorimetric, and catalytic evidences of hydrophobicity on Ti-MCM-41 silylated materials for olefin epoxidations

  • Silvestre Albero, Joaquin
  • Rodriguez-Reinoso, Francisco
  • Domine, Marcelo Eduardo
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Navarro Villalba, Mª Teresa|||0000-0001-5012-8414
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Corma Canós, Avelino|||0000-0002-2232-3527
tHydrophobic Ti-MCM-41 samples prepared by post-synthesis silylation treatment demonstrate to behighly active and selective catalysts in olefins epoxidation by using organic hydroperoxides as oxidizingagents in liquid phase reaction systems. Epoxide yields show important enhancements with increasedsilylation degrees of the Ti-mesoporous samples. Catalytic studies are combined and correlated withspectroscopic techniques (e.g. XRD, XANES, UV-Visible,29Si MAS-NMR) and calorimetric measurementsto better understand the changes in the surface chemistry of Ti-MCM-41 samples due to the post-synthesis silylation treatment and to ascertain the role of these trimethylsilyl groups incorporated inolefin epoxidation. In such manner, the effect of the organic moieties on solids, and both water and gly-col molecules contents on the catalytic activity and selectivity are analyzed in detail. Results show thatthe hydrophobicity level of the samples is responsible for the decrease in water adsorption and, conse-quently, the negligible formation of the non-desired glycol during the catalytic process. Thus, catalystdeactivation by glycol poisoning of Ti active sites is greatly diminished, this increasing catalyst stabilityand leading to practically quantitative production of the corresponding epoxide. The extended use ofthese hydrophobic Ti-MCM-41 catalysts together with organic hydroperoxides for the highly efficientand selective epoxidation of natural terpenes is also exemplified., The authors gratefully acknowledge financial support of Spanish Government (MAT2012-38567-C02-01, Consolider-Ingenio 2010-Multicat CSD-2009-00050 and Severo Ochoa SEV-2012-0267) and Generalitat Valenciana (Project Prometeo). M.E.D. also thanks funds from Spanish Government (CTQ-2011-27550) and CSIC (PIE 2009801063). J.S.A. and F.R.R. acknowledge financial support from MINECO (Projects MAT2013-45008-p and CONCERT Project-NASEMS (PCIN-2013-057), and from Generalitat Valenciana (PROMETEO2009/002).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Permselectivity improvement in membranes for CO2/N2 separation

  • Fernández-Barquín, Ana
  • Casado Coterillo, Clara
  • Irabien, Ángel
  • Palomino Roca, Miguel|||0000-0003-2983-1038
  • Valencia Valencia, Susana|||0000-0001-7160-2795
[EN] In this work, small-pore zeolites of different topology (CHA, LTA5, Rho), all with Si/Al ratio of 5, have been added to highly permeable poly(1-trimethylsilyl-1-propyne) (PTMSP) to increase its selectivity and thermal and mechanical stability. Membranes were characterized by TGA, XRD, SEM and CO2 and N-2 single gas permeation measurements at different temperatures. TGA reveal that the thermal resistance of the mixed matrix membranes (MMM) is as good as that of pure PTMSP polymer membranes. XRD and SEM results reflect that there is good interaction between the fillers and the membrane matrix, at 5 and 10 wt.% zeolite loadings, while at 20 wt.% a dual layer structure is formed, when Rho zeolite is the filler, because the particle size of Rho is higher than those of LTA5 or CHA, and voids appear that limit the permselectivity performance. In single gas permeation of N-2 and CO2, the influence of temperature, zeolite loading and type is analyzed. The selectivity of pure PTMSP is considerably enhanced with the addition of the zeolites and the increase of temperature, and the MMM loaded with 5 wt.% zeolite surpassed the Robeson's upper bound for CO2/N-2 separation, without decreasing the permeability too much. Upon increasing temperature from 298 to 333 K, the permselectivity is enhanced even further without loss of permeability. The 5 wt.% loaded membranes were tested in CO2/N-2 mixed gas separation experiments at 333 K and 12.5 wt.% CO2 in the feed, and the permselectivity of LTA5- and Rho-PTMSP membranes was further enhanced, compared with the single gas permeation experiments. (C) 2015 Elsevier B.V. All rights reserved., Financial support from the Spanish Ministry of Economy and Competitiveness (MINECO) under project CTQ2012-31229 at the Universidad de Cantabria and MAT2012-38567-C02-01 and Severo Ochoa SEV-2012-0267 at the ITQ (UPV-CSIC) are gratefully acknowledged. A.F.B. and C.C.C. also thank the MINECO for the Early Stage Researcher (BES2013-064266) and "Ramon y Cajal" tenure-track (RYC2011-0855) contracts, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photocages for protection and controlled release of bioactive compounds

  • Aparici-Espert, Maria Isabel
  • Cuquerella Alabort, Maria Consuelo
  • Miranda Alonso, Miguel Ángel
  • Paris, Cecilia|||0000-0002-5673-8114
  • Lhiaubet, Virginie Lyria|||0000-0002-8205-8892
[EN] Using a sunscreen-based photocage, we have demonstrated that it is possible to prevent photodegradation of a bioactive compound and to achieve its controlled photorelease. The concept has been proven linking avobenzone, one of the most important UVA blockers, to ketoprofen, which is a representative example of a photosensitive drug., Spanish Government (CTQ2015-70164-P, RIRAAF RETICS RD12/0013/0009, Severo Ochoa program/SEV-2012-0267 and BES-2013-066566), Generalitat Valenciana (Prometeo II/2013/005) and VLC/Campus Microcluster "Interacciones Luz-Farmaco en Sistemas Biologicos y Reacciones Adversas'' are gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Scope and limitations of the TEMPO/EPR method for singlet oxygen detection: the misleading role of electron transfer

  • Nardi, Giacomo
  • Manet, Ilse
  • Monti, Sandra
  • Miranda Alonso, Miguel Ángel
  • Lhiaubet-Vallet, Virginie
For many biological and biomedical studies, it is essential to detect the production of O-1(2) and quantify its production yield. Among the available methods, detection of the characteristic 1270-nm phosphorescence of singlet oxygen by time-resolved near-infrared (TRNIR) emission constitutes the most direct and unambiguous approach. An alternative indirect method is electron paramagnetic resonance (EPR) in combination with a singlet oxygen probe. This is based on the detection of the TEMPO free radical formed after oxidation of TEMP (2,2,6,6-tetramethylpiperidine) by singlet oxygen. Although the TEMPO/EPR method has been widely employed, it can produce misleading data. This is demonstrated by the present study, in which the quantum yields of singlet oxygen formation obtained by TRNIR emission and by the TEMPO/EPR method are compared for a set of well-known photosensitizers. The results reveal that the TEMPO/EPR method leads to significant overestimation of singlet oxygen yield when the singlet or triplet excited state of the photosensitizer is efficiently quenched by TEMP, acting as electron donor. In such case, generation of the TEMP+(center dot) radical cation, followed by deprotonation and reaction with molecular oxygen, gives rise to an EPR-detectable TEMPO signal that is not associated with singlet oxygen production. This knowledge is essential for an appropriate and error-free application of the TEMPO/EPR method in chemical, biological, and medical studies., The Spanish government (CTQ2012-32621, RyC-2007-00476, PFIS FI09/00312, Severo Ochoa Program SEV-2012-0267), the Carlos III Institute of Health (Grant RIRAAF, RETICS Program RD12/0013/0009), and the Generalitat Valenciana (Prometeo II/2013/005) are gratefully acknowledged for financial support. Dr. A. Vidal-Moya is acknowledged for his help with the EPR measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Drug-tubulin interactions interrogated by transient absorption spectroscopy

  • Bosca Mayans, Francisco
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • Tormos Faus, Rosa Esperanza
  • Andreu, José María
  • Jornet, David
  • Miranda Alonso, Miguel Ángel
[EN] Colchicine (COL) is a bioactive molecule with antitumor properties. When COL binds to tubulin (TU), it inhibits microtubule assembly dynamics. We have investigated COL-TU interactions using laser flash photolysis (LFP) technique and performing fully flexible molecular dynamics simulations. Excitation of COL at 355 nm in aqueous medium did not lead to any transient absorption spectrum. By contrast, in the presence of TU a transient peaking at lambda(max) ca. 420 nm was registered and assigned as triplet excited COL complexed with TU ((COL)-C-3*@TU). In aerated medium, the lifetime was tau ca. 160 mu s and the quantum yield was 0.138. Likewise, when the bicyclic COL analog MTC was submitted to LFP in the presence of TU, (MTC)-M-3@TU* was detected with a lifetime of ca. 62 ms and a quantum yield of 0.296, Aqueous solutions of MTC did not produce any signal in the microsecond timescale. The triplet energy of MTC was obtained by means of emission measurements and found to be ca. 200 kJ mol(-1), a value that matches with that previously reported for COL (188 kJ mol(-1)). Molecular dynamic simulations, both with the ground and triplet excited state, reveal a strong interaction between COL and TU to give stabilized complexes with restricted mobility inside the protein binding site. These results demonstrate that LFP is a useful methodology to study the binding of COL derivatives to TU and open a new way to evaluate the interactions of non-fluorescent anticancer drugs with this protein., Financial support from the Spanish Government (grants CTQ2010-19909; BFU2011-23416 and SEV 2012-0267), the Generalitat Valenciana (Prometeo II/2013/005) and Comunidad de Madrid (S2010/BMD-2353) is gratefully acknowledged. G.S. thanks ASIC-UPV for computing time.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Polymers from biomass: one pot two-step synthesis of furilydenepropanenitrile derivatives with MIL-100(Fe) catalyst

  • Rapeyko, Anastasia|||0000-0002-8309-3702
  • Arias, Karen S.|||0000-0001-5649-7392
  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Iborra Chornet, Sara|||0000-0003-1758-5095
[EN] Furilydenepropanenitrile derivatives, which are useful as monomers, have been obtained in high yields by coupling the oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-diformylfuran (DFF) and the Knoevenagel condensation of DFF with methylene active compounds in a one pot process. The oxidation step was studied using an Fe containing metal-organic framework (MIL-100(Fe), and Fe(BTC)), a Cu containing MOF (Cu3(BTC)(2)), an Fe exchanged HY zeolite and homogeneous Fe salts in the presence of 2,2,6,6-tetramethylpiperidine- 1-oxide (TEMPO) as a cocatalyst, NaNO2 as an additive and oxygen as the terminal oxidant. The results showed that the synthesized MIL-100(Fe) post treated with NH4F was the most active catalyst achieving 100% HMF conversion with 100% selectivity to DFF and can be reused with good success. Additionally, the catalytic system has been applied to the oxidation of different primary and secondary alcohols to aldehydes and ketones under mild reaction conditions with good success. The second step, the Knoevenagel condensation of the obtained DFF with malononitrile or ethyl cyanoacetate, was performed taking advantage of the basicity of the reaction medium., The Spanish MICINN Project (CTQ-2015-67592-P), Generalitat Valenciana (Prometeo Program), the Severo Ochoa Program and the EU-Japan Project NOVACAM are gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nd5.5W1xUxO11.25-delta system: Electrochemical characterization and hydrogen permeationstudy

  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
This work presents the structural and electrochemical characterization of mixed conducting materials based on the system Nd5.5W1-xUxO11.25-delta where x = 0.1, 0.5 and 1. The evolution of the crystalline structure is studied as a function of the sintering temperature and the U content in the oxide lattice. The influence of hydration and pO(2) as well as the H/D isotopic effect are studied by DC-electrochemical measurements under reducing environments. Hydrogen permeation is carried out for Nd5.5WO11.25-delta and Nd5.5W0.9U0.O-1(11.25-delta) compounds in the range from 650 to 750 degrees C. Finally, stability of the developed materials at 800 degrees C is evaluated in contact with CO2-rich gas streams. This work completes previous reported studies On Ln(6-x)WO(12-y) based materials that show the possibility of engineering the conductivity properties of the Ln(6-x)WO(12-y) just by doping strategies. (C) 2015 Published by Elsevier B.V, Financial support by the Spanish Government (Grants ENE2011-24761, CSD-2009-0050 and SEV-2012-0267) and the Helmholtz Association of German Research Centers through the portfolio topic MEM-BRAIN is kindly acknowledged. The authors are indebted to M. Fabuel for sample preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Freeze-casting: Fabrication of highly porous and hierarchical ceramic supports for energy applications

  • Gaudillere, Cyril Christian
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] The manufacture of structured ceramic porous support knows an important boom since more than a decade with the development of new shaping techniques. Among the most promising ones, the freeze-casting also called Ice-Templating allows the fabrication of ceramic parts exhibiting high porosity (>50%) and vertically aligned and hierarchically organized pores. Such structures were firstly conceived for biomedical applications like bone substitute and tissue engineering, but the distinctive features of freeze-cast structures have attracted the attention of diverse scientific fields, especially in high temperature ceramic based energy production systems. Indeed, technologies like (a) Solid Oxide Fuel Cell (SOFC) and Electrolyser Cell (SOEC), (b) gas separation (O-2, H-2) by asymmetric supported membranes based on mixed ionic and electronic conductors (MIEC) or hydrogen-permeable metals, and (c) Catalytic Membrane Reactor (CMR) systems present a porous component in their physical structure. This latest, presenting a tortuous pathway for gas access and as a consequence, a high transport limitation, is known to be a limiting component for the operation at high flow streams that would enable to reach industrial target. The aim of this paper is to give an overview of the freeze-casting ceramic shaping method and to show how its implementation could be useful for several energy applications where key components comprise a porous scaffold. A detailed presentation of the freeze-casting process and of the characteristics of the resulting porous parts is firstly given. The characteristic of freeze-cast parts and the drawbacks of conventional porous scaffolds existing in energy applications are drawn in order to highlight the expected beneficial effect of this new shaping technique as possible substitute to the conventional ones. Finally, a review of the state of the art freeze-cast based energy applications developed up to now and expected to be promising is given to illustrate the large perspectives opened by the implementation of the freeze-casting of ceramics for energy fields. Here we suggest discussing about the feasibility of incorporate freeze-cast porous support in high temperature ceramic-based energy applications. (C) 2016 SECV. Published by Elsevier Espana, S.L.U., [ES] La fabricación de soportes cerámicos porosos a través de nuevas técnicas de conformado es clave en el desarrollo de nuevos dispositivos en el sector energético y de la ingeniería química. La técnica de freeze-casting (colado por congelación) permite obtener componentes cerámicos muy bien sinterizados, con muy alta porosidad y poros con formas concretas. Los poros se orientan de manera que las propiedades de transporte de fluidos a su través son óptimos con respecto a otros tipos de estructuras porosas más irregulares. Concretamente, en el sector de la energía los soportes porosos se utilizan en aplicaciones tales como pilas de combustibles de óxidos sólidos o electrolizadores, membranas para la separación de gases, típicamente O2 o H2, y reactores catalíticos de membrana. En este artículo se revisan de manera exhaustiva los desarrollos en estos campos utilizando freeze-casting para el conformado de cuerpos porosos cerámicos. © 2016 SECV. Publicado por Elsevier España, S.L.U, Financial support by the Spanish Ministry for Science and Innovation (ENE2011-24761 and SEV-2012-0267 grants) and by the EU through FP7 GREEN-CC Project (Grant Agreement Number: 608524) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The impact of support surface area on the SMSI decoration effect and catalytic performance for Fischer-Tropsch synthesis of Co-Ru/TiO2-anatase catalysts

  • Bertella, Francine
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • MARTINEZ FELIU, AGUSTIN|||0000-0002-9974-1567
[EN] A series of Co-Ru/TiO2 catalysts (10 wt% Co, 0.5 wt% Ru, nominal loadings) were prepared by impregnation of TiO2-anatase supports synthesized with different specific surface areas (Ti-L: 53 m2 /g, Ti-M: 117 m2 /g, and Ti-H: 148 m2 /g) by tuning the conditions of the hydrothermal synthesis and/or the calcination treatments. The most relevant physicochemical properties of supports and catalysts were determined by a set of techniques including ICP-OES, XRD, N2 physisorption, electron microscopy (FESEM, HAADF-STEM, HR-TEM), H2-TPR, H2 chemisorption, and IR-CO. Oxidized precursors were reduced in-reactor under flowing pure H2 at 400 °C for 10 h and evaluated for Fischer-Tropsch synthesis (FTS) in a fixed bed reactor at 220 °C, 2.0 MPa, and H2/CO molar ratio of 2. These catalysts exhibited the well-known strong metal-support interaction (SMSI) effect reported for TiO2 materials by which partially reduced TiOx species formed during the catalyst reduction step migrate and decorate the surface of the supported metal phases. The extent to which the SMSI effect occurred was found to increase with the surface area of the TiO2-anatase carrier, as supported by H2 chemisorption, TEM, and IR-CO surface titration experiments. As a consequence, the activity per total mass of cobalt or cobalt-time-yield (CTY) of the Co-Ru/TiO2 catalysts gradually declined with the increase in support surface area: Co-Ru/Ti-L > Co-Ru/ Ti-M > Co-Ru/Ti-H. The catalysts, however, displayed similar initial TOFs, implying a negligible influence of the SMSI effect on the initial intrinsic activity of the surface Co0 sites. The high surface area Co-Ru/Ti-H catalyst exhibiting the most pronounced SMSI also presented the lowest C5+ selectivity. This behavior was explained by considering the contribution of two effects: the lower resistance to the intraparticle diffusion of ¿-olefins when increasing the support surface area, as inferred from the olefin-to-paraffin ratios and the values of the diffusionrelated parameter ¿, and the reduction in size of the cobalt ensembles on the terraces of Co0 nanoparticles, connected to the extent of SMSI, on which chain growth events are favored., Financial support by the MINECO of Spain through the Severo Ochoa (SEV 2012-0267) and ENE2014-5761-R projects is gratefully acknowledged. The authors also thank the Microscopy Service of the Universitat Politecnica de Valencia for its assistance in microscopy characterization. F. Bertella (Science without Frontiers - Process no. 13705/13-0) thanks CAPES for a predoctoral fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Engineering microstructure and redox properties in the mixed conductor Ce0.9Pr0.1O2-d+Co 2 mol %

  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Solis Díaz, Cecilia
  • Roitsch, Stefan
10% Praseodymium doped ceria exhibits a combination of mixed ionic and electronic conductivity, redox catalytic properties and chemical compatibility with water and carbon dioxide at high temperatures. Minor additions of cobalt oxide have been demonstrated to act as a sintering aid as well as an effective promoter of the electronic conduction. However, an excess of sintering temperature causes cobalt aggregation into the grain boundaries as inferred from FE-SEM/EDX and TEM analysis. The redox behaviour of the materials was studied by means of temperature programmed desorption (TPD) and reduction (TPR). This work shows the systematic study of sintering conditions in order to understand the evolution of the material microstructure, grain boundaries and the role of cobalt in this complex system. The final purpose of the work is to improve both electronic and oxygen ion transport properties for their potential application as oxygen-transport membranes and solid oxide fuel cell components. The sample sintered at 1000 degrees C exhibited the highest total conductivity at high temperatures, which is principally related to the improvement in the electronic conductivity through the grain boundary network., Funding from the Spanish Government (ENE2011-24761 and SEV-2012-0267 grants) and Helmholtz Association (MEM-BRAIN Portfolio) is kindly acknowledged. Dr J. L. Jorda contributed to this work with the HT-XRD measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimized hybrid nanospheres immobilizing Rhizomucor miehei lipase for chiral biotransformation

  • Verri, Francesca
  • Macario, Anastasia
  • Giordano, Girolamo
  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] In this study, the immobilization of Rhizomucor miehei lipase into hybrid nanospheres containing a liposomal core was reported. Organic internal liposomal enzyme phase was protected by inorganic silica matrix, obtained with and without surfactant, that stabilizes the internal organic phase and isolates and protects the bioactive molecules. The optimized heterogeneous catalyst thus prepared was used for enantioselective esterification of (R,S)-ibuprofen. The influence of several catalytic parameters on the activity of hybrid nanospheres (type of solvent, nature of the alcohol, reaction temperature, etc.,) was investigated. The heterogeneous biocatalysts best performed at 37 degrees C, using isooctane as solvent and 1-propanol as alcohol (with ester yield ranging between 78 and 93%). High activity and stability (up to nine reaction cycles) of enzyme-immobilized hybrid nanospheres, with respect to the free form, were observed. R. miehei lipase, both in its free and immobilized forms, reacts only with the S(+) enantiomer of (R,S)-ibuprofen, in all the tested reaction conditions. (C) 2015 Elsevier Ltd. All rights reserved., The authors thank the financial support from Consolider-Ingenio MULTICAT CSD2009-00050, MAT2014-52085-C2-1-P, and Severo Ochoa Excellence Program SEV-2012-0267.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Oxygen transport membranes in a biomass/coal combined strategy for reducing CO2 emissions: Permeation study of selected membranes under different CO2-rich atmospheres

  • García Fayos, Julio
  • Vert Belenguer, Vicente Bernardo
  • Solis Díaz, Cecilia
  • Gaudillere, Cyril Christian
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] This contribution introduces how the integration of biomass as fuel in power plants would balance CO2 emissions and the related role of oxygen transport membranes (OTM) on it. CO2 capture techniques could be introduced to minimize CO2 emissions at the cost of a substantial energy penalty in the overall process. Among the different approaches, the use of pure O2 and/or N2-free oxidation gases for combustion and/or for gasification leads to promising energy efficiencies. Ceramic OTM membranes could be successfully integrated in such thermal processes, which enable to increase the net plant efficiency when CO2 capture is implemented. Further, this work reviews how selected ceramic materials and membrane architectures behave under CO2 containing atmospheres at high temperatures above 700 °C. These conditions have been selected for checking the viability of these membrane compositions and configurations to fit in an oxy-co-gasification process, involving coal and biomass. The tested asymmetric membranes present competitive oxygen fluxes in the range 0.6 1.2 ml min&#8722;1 cm&#8722;2 when using CO2 as (inlet) sweep gas at 850 °C (optimal membrane operation conditions in oxy-fuel power plant) and stable oxygen production up to 100 h of continuous operation in similar conditions. Specifically, La0.6Sr0.4Co0.2Fe0.8O3&#8722;ä and NiFe2O4 Ce0.8Tb0.2O2&#8722;ä composite materials showed the best results for oxygen permeation and time stability under CO2-rich atmospheres., Financial support by the Spanish Government (ENE2011-24761 and SEV-2012-0267 grants), by the EU through FP7 GREEN-CC Project (GA 608524), and by the Helmholtz Association of German Research Centers through the Helmholtz Portfolio MEM-BRAIN is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Selective catalytic reduction of nitric oxide with ammonia over Fe-Cu modified highly silicated zeolites

  • Jouini, Houini
  • Mejri, Imène
  • Martinez-Ortigosa, Joaquin
  • Cerrillo, José Luis
  • Mhamdi, Mourad
  • Delahay, Gerard
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
[EN] In the present study, the solid-state ion exchange method (SSIE) was applied to introduce iron and copper into highly silicate zeolites: beta (BEA, Si/Al¿=¿12.5), ferrierite (FER, Si/Al¿=¿10) and mordenite (MOR, Si/Al¿=¿10). The activity of the prepared samples in the selective catalytic reduction of NO with ammonia (NH3-SCR) was measured. The highest performance was recorded for Cu-Fe-BEA followed by Cu-Fe-MOR while Cu-Fe-FER showed a low catalytic activity over the entire reaction temperature range. It is shown in this study that the zeolite framework is one of the parameters controlling the amount, environment and distribution of metal species formed during the ion exchange process in Cu-Fe-zeolite catalysts., Financial support by the MINECO of Spain through the Severo Ochoa (SEV-2016-0683) and CTQ2015-68951C3-1-R projects is gratefully acknowledged. The authors thank the Electron Microscopy Service of the Universitat Politecnica de Valencia, Spain for STEM experiments. J. Martinez-Ortigosa (SEV-2012-0267-02) is grateful to Severo Ochoa Program for a predoctoral fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Non-oxidative dehydroaromatization of methane:an effective reaction regeneration cyclic operation for catalyst life extension

  • Portilla Ovejero, Mª Teresa
  • Llopis Alonso, Francisco
  • Martínez, Cristina|||0000-0002-4415-084X
[EN] Non-oxidative methane aromatization is an attractive direct route for producing higher hydrocarbons. It is highly selective to benzene despite the low conversion due to thermodynamic limitations, and Mo/H-ZSM-5, the first catalyst proposed for this reaction, is still considered as one of the most adequate. The major problem of this process is the severe catalyst deactivation due to the rapid build-up of carbonaceous deposits on the catalysts. Here we present an effective regeneration procedure that extends the life of Mo/zeolite based catalysts by combining reaction periods of 1.5 h with 0.5 h regeneration steps in a continuous cyclic mode and methane activation after each regeneration stage. Benzene productivity obtained with Mo/ZSM-5 is shown to be almost constant for increasing TOS ranges when applying this new cyclic protocol, and threefold values are achieved for an 18 h on stream period by limiting the reaction steps to the first 1.5 h of maximum benzene selectivity (97 vs. 33 g benzene per kg cat h) compared to a conventional single run., Funding from the European Community's 7th Framework Program through the Collaborative Project Next-GTL (agreement n° 229183) and financial support by the Spanish GovernmentMINECO through “Severo Ochoa” (SEV 2012-0267), Consolider Ingenio 2010-Multicat, MAT2012-37160 and MAT2012-31657 are acknowledged. The authors thank B. Esparcia for technical assistance and the Electron Microscopy Service of the UPV for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimization of the mixed protonic–electronic conducting materials based on (Nd5/6Ln1/6)5.5WO11.25−δ

  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Schroeder, Michael
[EN] The tungstates Ln6WO12 are proton conducting materials exhibiting mixed (protonic and electronic) conductivity and remarkable stability in moist CO2 environments. Hydrogen-permeable membranes made of this kind of material find application in industrial gas separations such as hydrogen separation from hydrogen containing gases, for the implementation of pre-combustion strategies in fossil-fuel power plants and catalytic membrane reactors. This work presents a thorough characterization (structure, conduction and hydrogen permeation) of mixed conducting materials on the specific system (Nd5/6Ln1/6)5.5WO11.25 d (Ln: La, Ce, Pr, Eu, Tb). The evolution of the crystal structure and crystallite size was studied as a function of the lanthanide dopant. The total conductivity in different environments was investigated as a function of pO2 and temperature. Furthermore, the H/D isotopic effect and the hydration effect were also studied in reducing and oxidizing atmospheres by DC conductivity measurements. Hydrogen permeation was measured for all compounds in the range of 700 1000 C studying the effect of pH2 and the hydration degree of the membrane depending on the lanthanide dopant. Finally, the chemical stability of these materials at 800 C was evaluated in contact with a humidified CO2-rich gas stream., Financial support by the Spanish Ministry for Science and Innovation (Grants JAE-Pre 08-0058, ENE2011-24761, CSD-2009-0050 and SEV-2012-0267) and the Helmholtz Association of German Research Centres through the Helmholtz Alliance MEM-BRAIN (Initiative and Networking Fund) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The importance of T ... T ... T angles in the feasibility of zeolites

  • Liu, Xuehua
  • Valero Cubas, Soledad|||0000-0003-4565-326X
  • Argente, Estefanía|||0000-0002-5431-3868
  • Botti V.|||0000-0002-6507-2756
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
The database of prospective zeolites (www. hypotheticalzeolites.net) has been screened in search of feasible zeolites. Previous criteria of zeolite feasibil- ity have been reviewed, based on descriptors such as energy, density, average and distribution of ring sizes, and more importantly that of Li et al. (LID criteria) presented recently [Angew. Chem. Int. Ed. 2013, 52, 1673], based on Si O, O ... O, and Si ... Si distances of SLC-minimised struc- tures. In spite of the still large number of feasible zeolites according to this and other criteria, a number of research- ers wonder why there are so many feasible and so few synthesised zeolites. Without answering this difficult question, a new criteria is proposed in this study based on the fact that T ... T ... T angles (T is tetrahedral atom) show spe- cific ranges of values depending on the ring size to which they belong. Based on improved definitions to count and enumerate rings in zeolites, and with data from the IZA database, we introduce the TTT criteria, which we propose to use after the LID criteria, to further narrow the space of feasible zeolites., We thank ASIC computational centre of UPV for making available their computational resources. UPV is acknolwdeged by funding through project PAID-05-12. G. S. thanks the Spanish government for the provision of Severo Ochoa project (SEV 2012-0267) and MAT2012-31657 project. Professors Mike Treacy and Christian Baerlocher are gratefully acknowledged for useful discussions. Laurent Baumes is thanked by initial training with the database.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Co-Fe Clusters Supported on N-Doped Graphitic Carbon as Highly Selective Catalysts for Reverse Water Gas Shift Reaction

  • Peng, Lu
  • Jurca, Bogdan
  • Gordillo, Alvaro
  • Parvulescu, Vasile I.
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Graphitic carbons are suitable supports of metal nanoparticles with catalytic activity. In the present study, the preparation of N-doped graphitic carbon supporting clusters of Fe-Co alloys starting from biomass waste is reported. These sub-nanometric Co-Fe clusters supported on N-doped graphitic carbon at a metal loading below 0.2 wt % exhibit high activity for the selective hydrogenation of CO2 to CO. Operating at 500 degrees C and 10 bar with an H-2/CO2 molar ratio of 7 and a space velocity of 600 h(-1), a conversion of 56% with a selectivity of over 98% to CO, and remarkable stability over 30 h operation was obtained. Interestingly, analogous catalysts based on N-doped graphitic carbon with much higher Co-Fe loadings and an average particle size range of 1-5 nm exhibit only half of this activity, with similar CO selectivity. This contrasting behavior reveals the dramatic effect of the particle size on the catalytic activity. In comparison, SiO2 as support under similar conditions affords CH4 as the main product., Financial support by the Spanish Ministry of Science, Innovation, and University (Severo Ochoa and RTI2018.98237-B-CO1) and Generalitat Valenciana (Prometeo 2017/083) is gratefully acknowledged. L.P. thanks the Generalitat Valenciana for a Santiago Grisolia scholarship. BASF is thanked for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Simple organic structure directing agents for synthesizing nanocrystalline zeolites

  • Gallego-Sánchez, Eva María
  • Díaz-Rey, Maria Del Rocio
  • Martínez Armero, Marta Evelia
  • Paris, Cecilia|||0000-0002-5673-8114
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • Martínez, Cristina|||0000-0002-4415-084X
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The synthesis of the ZSM-5 and beta zeolites in their nanosized form has been achieved by using simple alkyl-substituted mono-cationic cyclic ammonium cations as OSDA molecules. The particular combination of a cyclic fragment and a short linear alkyl-chain group (preferentially C4) within the monocationic OSDA molecules allows directing the crystallization of nanosized zeolites with excellent solid yields (above 90%). Interestingly, the formation of the nanosized ZSM-5 and beta zeolites mostly depends on the size and nature of the cyclic fragment of the OSDA molecule, resulting in all cases in nanocrystalline solids with homogeneous distributions of particle sizes (similar to 10-25 nm) and controlled Si/Al molar ratios (similar to 15-30). The achieved nanosized ZSM-5 and beta zeolites have been extensively characterized by different techniques to study their physico-chemical properties, such as chemical composition, pore accessibility or Bronsted acidity, among others. Moreover, the catalytic properties of the nanosized ZSM-5 and beta zeolites have been evaluated for different chemical reactions, including methanol-to-olefins (MTO) in the case of ZSM-5, and alkylation of benzene with propylene to obtain cumene and oligomerization of light olefins to liquid fuels in the case of beta, observing in all cases improved catalytic activity and product selectivity towards target products when compared to related catalysts., This work has been supported by the Spanish Government-MINECO through "Severo Ochoa" (SEV 2012-0267), MAT2015-71261-R and CTQ2015-70126-R, by the European Union through ERC-AdG-2014-671093 (SynCatMatch) and by the Fundacion Ramon Areces through a research contract of the "Life and Materials Science" program. E. M. G. and M. R. D-R. acknowledge "La Caixa - Severo Ochoa" International PhD Fellowships (call 2015). M. E. M-A. thanks MINECO for economical support through pre-doctoral fellowship (BES-2013-066800). The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization.