Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 252
Encontrada(s) 3 página(s)

Docta Complutense
Publication Artículo científico (JournalArticle)

Optomagnetic nanofluids for controlled brain hyperthermia: a critical study

  • Méndez González, Diego
  • Lifante, José
  • Zabala Gutiérrez, Irene
  • Marin, Riccardo
  • Ximendes, Erving
  • Sanz-de Diego, Elena
  • Iglesias-de la Cruz, M. Carmen
  • Teran, Francisco J.
  • Rubio Retama, Benito Jorge
  • Jaque, Daniel
Optomagnetic nanofluids (OMNFs) are colloidal dispersions of nanoparticles (NPs) with combined magnetic and optical properties. They are especially appealing in biomedicine since they can be used as minimally invasive platforms for controlled hyperthermia treatment of otherwise difficultly accessible tumors such as intracranial ones. On the one hand, magnetic NPs act as heating mediators when subjected to alternating magnetic fields or light irradiation. On the other hand, suitably tailored luminescent NPs can provide a precise and remote thermal readout in real time. The combination of heating and thermometric properties allows, in principle, to precisely monitor the increase in the temperature of brain tumors up to the therapeutic level, without causing undesired collateral damage. In this work we demonstrate that this view is an oversimplification since it ignores the presence of relevant interactions between magnetic (γ-Fe2O3 nanoflowers) and luminescent nanoparticles (Ag2S NPs) that result in a detrimental alteration of their physicochemical properties. The magnitude of such interactions depends on the interparticle distance and on the surface properties of nanoparticles. Experiments performed in mouse brains (phantoms and ex vivo) revealed that OMNFs cannot induce relevant heating under alternating magnetic fields and fail to provide reliable temperature reading. In contrast, we demonstrate that the use of luminescent nanofluids (containing only Ag2S NPs acting as both photothermal agents and nanothermometers) stands out as a better alternative for thermally monitored hyperthermia treatment of brain tumors in small animal models.
Docta Complutense
Research data Set de datos (Dataset)

Data: In vitro corrosion-assisted cracking of AZ31B Mg alloy with a hybrid PEO+MWCNTs/PCL coating

  • Daavari, Morteza
  • Conde, Ana
  • Atapour, Masoud
  • HosseinpourRokni, Mohsen
  • Mora Sánchez, Hugo
  • Mohedano Sánchez, Marta
  • Matykina, Endzhe
  • Arrabal Durán, Raúl
The effects of multi-walled carbon nanotubes (MWCNTs) incorporation and polycaprolactone (PCL) post-treatment on the environmental-assisted cracking behaviour of a plasma electrolytic oxidation (PEO) coated AZ31B Mg alloy were elucidated in this study. Slow strain rate tensile (SSRT) experiments were carried out in simulated body fluid (SBF) for the bare material and different coating systems with and without MWCNTs and PCL overlay. Electrochemical impedance spectroscopy (EIS) and microscopic examinations (SEM and optical) were also conducted to reveal the role of corrosion on the mechanical response. In spite of the significant positive influence of the PEO coatings (with and without MWCNTs) on the bio-electrochemical behaviour of the AZ31B alloy, the environmental-assisted cracking performance was only marginally improved. Furthermore, PEO+MWCNTs/PCL coating system increased the fracture strain of the specimens by 7% compared to the uncoated specimens. Based on the SEM and optical micrographs, hydrogen embrittlement was suggested as the main cause of failure of the coated specimens under the in vitro slow strain rate test conditions.
Docta Complutense
Research data Set de datos (Dataset)

Data: Hybrid PEO/sol-gel coatings loaded with Ce for corrosion protection of AA2024-T3

  • Del Olmo Martínez, Rubén
  • López Martínez, Esther
  • Matykina, Endzhe
  • Tiringer, Ursa
  • Mol, J.M.C.
  • Mohedano Sánchez, Marta
  • Arrabal Durán, Raúl
Plasma electrolytic oxidation (PEO) has been targeted as an eco-friendly alternative technology to conventional chromic acid anodizing (CAA) for corrosion protection of aluminium alloys in the aircraft industry. However, conventional PEO technology implies high energy consumption. Flash-PEO coatings (≤10 μm) produced in short treatment times (≤ 5 min) constitute a feasible way to overcome this limitation. Nevertheless, the long-term corrosion resistance is compromised, thus requiring novel sealing post-treatments. The present work studies the effect of stand-alone hybrid sol-gel (HSG) and Ce-doped hybrid sol-gel (HSG-Ce) coatings as a sealing post-treatment to evaluate the long-term corrosion resistance of Flash-PEO coatings on aluminium alloy (AA) 2024-T3. The characterization of the PEO, HSG, and HSG-Ce coatings was performed by scanning electron microscopy, X-ray diffraction, water contact angle, dry adhesion tests (ISO 2409), optical profilometry and Fourier transform infrared spectroscopy. The corrosion behaviour was assessed by electrochemical impedance spectroscopy up to 21 days (3.5 wt% NaCl). Active corrosion protection was assessed by immersion tests of artificially scratched coatings. Present findings reveal that low-energy-cost Flash-PEO coatings were successfully formed on AA2024-T3 alloy. Both HSG and HSG-Ce coatings were homogeneously formed on Flash PEO coating. Regarding the corrosion resistance, HSG-Ce showed significant scratch protection during 21 days of immersion in 3.5 wt% NaCl. The results suggest that, while the release of Si and Ce from the coating provided corrosion protection, nitrate release promoted localized corrosion phenomena in the scribe. This was associated with the preferential pitting corrosion phenomena at the Cu-rich intermetallic compounds instead of forming a thick and stablenitrate-rich passive layer.
Docta Complutense
Research data Set de datos (Dataset)

Data: Flash plasma electrolytic oxidation and electrochemical behaviour in physiological media of additive manufacturing Ti6Al4V alloy

  • Mora Sánchez, Hugo
  • Ramos, Carolina
  • Mohedano Sánchez, Marta
  • Torres, Belén
  • Arrabal Durán, Raúl
  • Matykina, Endzhe
The objective of this work is to understand the plasma electrolytic oxidation (PEO) treatment and electrochemical behaviour of a Ti6Al4V alloy manufactured by a laser powder bed fusion additive manufacturing (AM) technique known as direct metal laser sintering (DMLS). Ca and P-containing coatings were produced with short time (<120 s) PEO treatments (also termed as Flash-PEO) obtaining 3–10 μm-thick coatings on both the AM alloy and a conventional counterpart. Subsequently, the electrochemical behaviour of the bare and treated alloys was assessed in a modified α-MEM solution via potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The fine α-lamellar microstructure of the AM alloy with small β-phase particles at the interlamellar spaces was seen to advance the onset of sparking promoting faster growth of PEO coating in comparison to the conventional alloy. Flash-PEO coatings enhanced the corrosion protection of both conventional and AM alloys, the thinnest (<3 μm) coatings providing up to three times greater protection. AM Ti6Al4V was found to be susceptible to localized crevice corrosion which could be assigned to the high grain boundary density. Flash-PEO treatments, even as short as 35 s, were sufficient to successfully prevent it.
Docta Complutense
Research data Set de datos (Dataset)

Data: Corrosion of additively manufactured Ti6Al4V alloy in saline and acidic media

  • Mora Sánchez, Hugo
  • Collado Vian, Miguel
  • Mohedano Sánchez, Marta
  • Arrabal Durán, Raúl
  • Matykina, Endzhe
The present work aims to provide corrosion performance data for an additively manufactured Ti6Al4V alloy in saline and polluted environments. The as-received additively manufactured material underwent heat treatment at 850 °C for 3 h to transform the acicular α’ microstructure into a lamellar α microstructure. Comparative corrosion assessments were conducted between the heat-treated substrates, the as-received condition, and a conventionally mill-annealed alloy. Potentiodynamic polarization experiments were carried out in saline (3.5 wt.% NaCl) and acid aqueous media ((NH4)2SO4 containing Harrison’s solution). The corrosion performance of additively manufactured substrates matched or surpassed that of the conventional alloy in Harrison’s solutions while remaining inferior in saline medium, despite forming a thicker passive film. Overall, the XY plane showed better corrosion performance, particularly after the elimination of the acicular α’ martensite by the applied heat treatment. The results also suggested that the presence of the coarse β phase was beneficial in 3.5 wt.% NaCl solution and detrimental in Harrison’s solutions, more so in acidified and fluorinated conditions.
Docta Complutense
Research data Set de datos (Dataset)

Data: Degradation rate control issues of PEO-coated wrought Mg0.5Zn0.2Ca alloy

  • Moreno Turiegano, Lara
  • Mohedano Sánchez, Marta
  • Arrabal Durán, Raúl
  • Matykina, Endzhe
Bioactive plasma electrolytic oxidation (PEO) coatings were developed on a wrought Mg0.5Zn0.2Ca alloy using a transparent electrolyte for easy maintenance and waste disposal, compared to a conventional suspension-based solution. Treatment times of 300, 600, and 900 s were evaluated for their effects on coating morphology, composition, and corrosion resistance. A short-time electrochemical impedance spectroscopy (EIS) screening was utilized to identify coatings with optimal corrosion protection. To assess the degradation rate and corrosion mechanisms, hydrogen evolution was monitored under pH-controlled quasi-in vivo conditions over extended immersion periods. Coating thickness increased by only 3% from 300 to 900 s of treatment (13 and 18 µm, respectively), with pore bands formed near the barrier layer at 900 s. The short-term EIS screening revealed that the coatings produced at 600 and 900 s were less protective and consistent than those at 300 s due to the presence of pore bands, which increased permeability. Hydrogen evolution measurements during 5 days of immersion at pH 7.4 indicated a tenfold higher degradation rate of the PEO-coated alloy compared to the bare substrate. Therefore, none of the PEO coatings provided effective corrosion protection after 24 h of immersion, which is attributed to crack formation at the PEO/corrosion products interface. This highlights the importance of crevices in the corrosion of Mg-Zn-Ca alloys. The presence of ZnO exacerbates the corrosion of magnesium in crevice areas.
Repisalud
Publication Artículo científico (JournalArticle)

Goat Milk Exosomes As Natural Nanoparticles for Detecting Inflammatory Processes By Optical Imaging.

  • Santos-Coquillat, Ana
  • González, María Isabel
  • Clemente-Moragón, Agustín
  • González-Arjona, Mario
  • Albaladejo-García, Virginia
  • Peinado, Héctor
  • Muñoz, Javier
  • Ximénez Embún, Pilar
  • Ibañez, Borja
  • Oliver, Eduardo
  • Desco, Manuel
  • Salinas, Beatriz
Exosomes are cell-derived nanovesicles with a proven intercellular signaling role in inflammation processes and immune response. Due to their natural origin and liposome-like structure, these nanometer-scale vesicles have emerged as novel platforms for therapy and diagnosis. In this work, goat milk exosomes are isolated and fully characterized in terms of their physicochemical properties, proteomics, and biochemical profile in healthy mice, and used to detect inflammatory processes by optical imaging. For the in vitro and in vivo experiments, the exosomes are covalently labeled with the commercial fluorophores sulfo-Cyanine 5 and BODIPY-FL to create nanoprobes. In vitro studies using confocal imaging, flow cytometry, and colorimetric assays confirm the internalization of the nanoprobes as well their lack of cytotoxicity in macrophage populations RAW 264.7. Optical imaging in the mouse peritoneal region confirms the in vivo ability of one of the nanoprobes to localize inflammatory processes. In vivo imaging shows exosome uptake in the inflamed peritoneal region, and flow-cytometric analysis of peritonitis exudates confirms the uptake by macrophage and neutrophil populations. These results support the promising use of goat milk exosomes as natural probes in the detection of inflammatory processes.
Repisalud
Publication Artículo científico (JournalArticle)

A Survey for Human Tissue-Level Determinants of CAV1 Regulation and Function.

  • Jiménez-Jiménez, Víctor
  • Sánchez-Cabo, Fátima
  • Schwartz, Martin A
  • Sánchez-Álvarez, Miguel
  • Del Pozo, Miguel Ángel
CAV1 is a protein-coding gene linked to several disorders, including cancer, lipodystrophy, and cardiovascular diseases. While its ability to respond to various mechanical and metabolic stimuli has been documented, a comprehensive understanding of its physiological regulation in humans is lacking. We leveraged the comprehensiveness of human post-mortem tissue data from the Genotype-Tissue Expression (GTEx) consortium, systematically exploring the sources of variability in CAV1 transcriptional levels using extensive bulk and single-nuclei RNA-seq datasets. This human-centric approach, avoiding inter-species comparisons, constitutes a unique resource to explore CAV1 regulation within the complexity of human tissues. Notably, cell type proportion was identified as a major determinant of CAV1 transcription levels across tissues. Donor physiological conditions, including disease states and end-of-life circumstances, also exhibited a tissue-specific influence. Among primary upstream regulators associated with CAV1, chromatin modifiers stood out, especially SMARCA2, which showed a positive correlation across tissues, and PRC2 complexes, which exhibited tissue-specific correlation. Upstream regulatory networks determining CAV1 levels are also enriched for annotations such as mechanobiology (e.g., TEAD4), immunity (e.g., RELA and STAT3), and metabolism (e.g., MYC and NRF1). A remarkable observation was a strong correlation between CAV1 and the relative infiltration of immune cells across tissues, supporting a potential role for CAV1 as a marker and driver of tissue immune infiltration.
Repisalud
Publication Artículo científico (JournalArticle)

Endothelial YAP/TAZ activation promotes atherosclerosis in a mouse model of Hutchinson-Gilford progeria syndrome.

  • Barettino, Ana
  • González-Gómez, Cristina
  • Gonzalo, Pilar
  • Andrés-Manzano, María J
  • Guerrero, Carlos R
  • Espinosa, Francisco M
  • Carmona, Rosa M
  • Blanco, Yaazan
  • Dorado, Beatriz
  • Torroja, Carlos
  • Sánchez-Cabo, Fátima
  • Quintas, Ana
  • Benguría, Alberto
  • Dopazo, Ana
  • García, Ricardo
  • Benedicto, Ignacio
  • Andrés, Vicente
Hutchinson-Gilford progeria syndrome (HGPS) is an extremely rare disease caused by the expression of progerin, an aberrant protein produced by a point mutation in the LMNA gene. HGPS patients show accelerated aging and die prematurely mainly from complications of atherosclerosis such as myocardial infarction, heart failure, or stroke. However, the mechanisms underlying HGPS vascular pathology remain ill-defined. We used single-cell RNA sequencing to characterize the aorta in progerin-expressing LmnaG609G/G609G mice and wild-type controls, with a special focus on endothelial cells (ECs). HGPS ECs showed gene expression changes associated with extracellular matrix alterations, increased leukocyte extravasation, and activation of the yes-associated protein 1/transcriptional activator with PDZ-binding domain (YAP/TAZ) mechanosensing pathway, all validated by different techniques. Atomic force microscopy experiments demonstrated stiffer subendothelial extracellular matrix in progeroid aortae, and ultrasound assessment of live HGPS mice revealed disturbed aortic blood flow, both key inducers of the YAP/TAZ pathway in ECs. YAP/TAZ inhibition with verteporfin reduced leukocyte accumulation in the aortic intimal layer and decreased atherosclerosis burden in progeroid mice. Our findings identify endothelial YAP/TAZ signaling as a key mechanism of HGPS vascular disease and open a new avenue for the development of YAP/TAZ-targeting drugs to ameliorate progerin-induced atherosclerosis.
Repisalud
Publication Artículo científico (JournalArticle)

Structural basis for the inactivation of cytosolic DNA sensing by the vaccinia virus.

  • Rivera Calzada, Angel
  • Arribas-Bosacoma, Raquel
  • Ruiz-Ramos, Alba
  • Escudero-Bravo, Paloma
  • Boskovic, Jasminka
  • Fernandez-Leiro, Rafael
  • Oliver, Antony W
  • Pearl, Laurence H
  • Llorca Blanco, Oscar Antonio
  • Arribas-Bosacoma, Raquel
  • Ruiz-Ramos, Alba
  • Escudero-Bravo, Paloma
  • Fernandez-Leiro, Rafael
  • Oliver, Antony W
  • Pearl, Laurence H
Detection of cytosolic DNA is a central element of the innate immunity system against viral infection. The Ku heterodimer, a component of the NHEJ pathway of DNA repair in the nucleus, functions as DNA sensor that detects dsDNA of viruses that replicate in the cytoplasm. Vaccinia virus expresses two proteins, C4 and C16, that inactivate DNA sensing and enhance virulence. The structural basis for this is unknown. Here we determine the structure of the C16 - Ku complex using cryoEM. Ku binds dsDNA by a preformed ring but C16 sterically blocks this access route, abrogating binding to a dsDNA end and its insertion into DNA-PK, thereby averting signalling into the downstream innate immunity system. C4 replicates these activities using a domain with 54% identity to C16. Our results reveal how vaccinia virus subverts the capacity of Ku to recognize viral DNA.
Repisalud
Publication Artículo científico (JournalArticle)

PERK-dependent reciprocal crosstalk between ER and non-centrosomal microtubules coordinates ER architecture and cell shape.

  • Sánchez-Álvarez, Miguel
  • Lolo, Fidel Nicolás
  • Sailem, Heba
  • Fulgoni, Giulio
  • Pascual-Vargas, Patricia
  • Agüera, Lucía
  • Catalá-Montoro, Mauro
  • Arias-García, Mar
  • López, Juan Antonio
  • Vázquez, Jesús
  • Del Pozo, Miguel Ángel
  • Bakal, Chris
The architecture of the endoplasmic reticulum (ER) is a key determinant of its function. Its dynamics are linked to those of the cytoskeleton, but our understanding of how this coordination occurs and what its functional relevance is, limited. Here, we report that the unfolded protein response (UPR) transducer EIF2AK3/PERK (eukaryotic translation initiation factor 2-alpha kinase 3/protein kinase R-like endoplasmic reticulum kinase) is essential for acute-stress-induced peripheral redistribution and remodeling of the ER through eukaryotic initiation factor 2 alpha (eIF2α) phosphorylation and translation initiation shutdown. PERK-mediated eIF2α phosphorylation can be bypassed by blocking polysome assembly, depleting microtubule (MT)-anchoring ER proteins such as p180/RRBP1 (ribosome-binding protein 1), or disrupting the MT cytoskeleton. Specific disruption of non-centrosomal MTs, but not centrosome depletion, rescues ER redistribution in PERK-deficient cells. Conversely, PERK deficiency stabilizes non-centrosomal MTs against proteasomal degradation, promoting polarized protrusiveness in epithelial cells and neuroblasts. Thus, PERK coordinates ER architecture and homeostasis with cell morphogenesis by coupling ER remodeling and non-centrosomal MT stability and dynamics.
Repisalud
Publication Artículo científico (JournalArticle)

Biophysical and biological impact on the structure and IgE-binding of the interaction of the olive pollen allergen Ole e 7 with lipids.

  • Oeo-Santos, Carmen
  • López-Rodríguez, Juan Carlos
  • García-Mouton, Cristina
  • San Segundo-Acosta, Pablo
  • Jurado, Aurora
  • García-Álvarez, Begoña
  • Pérez-Gil, Jesús
  • Villalba, Mayte
  • Barderas Manchado, Rodrigo
  • Cruz, Antonio
  • Moreno-Aguilar, Carmen
Ole e 7 allergen from Olea europaea pollen possesses a major clinical relevance because it produces severe symptoms, such as anaphylaxis, in allergic patients exposed to high olive pollen counts. Ole e 7 is a non-specific lipid transfer protein (nsLTP) characterized by the presence of a tunnel-like hydrophobic cavity, which may be suitable for hosting and, thus, transporting lipids -as it has been described for other nsLTPs-. The identification of the primary amino acid sequence of Ole e 7, and its production as a recombinant allergen, allowed characterizing its lipid-binding properties and its effect at air-liquid interfaces. Fluorescence and interferometry experiments were performed using different phospholipid molecular species and free fatty acids to analyse the lipid-binding ability and specificity of the allergen. Molecular modelling of the allergen was used to determine the potential regions involved in lipid interaction. Changes in Ole e 7 structure after lipid interaction were analysed by circular dichroism. Changes in the IgE binding upon ligand interaction were determined by ELISA. Wilhelmy balance measurements and fluorescence surfactant adsorption tests were performed to analyse the surface activity of the allergen. Using these different approaches, we have demonstrated the ability of Ole e 7 to interact and bind to a wide range of lipids, especially negatively charged phospholipids and oleic acid. We have also identified the protein structural regions and the residues potentially involved in that interaction, suggesting how lipid-protein interactions could define the behaviour of the allergen once inhaled at the airways.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization of traditional artificial patinas on copper using the voltammetry of immobilized particles

  • Doménech-Carbó, Antonio
  • Ramírez-Barat, Blanca
  • Petiti, Chiara
  • Goidianich, Sara
  • Cano, Emilio
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
[EN] The voltammetry of immobilized particles methodology (VIMP) is used to characterize the composition of artificial patinas on copper. The voltammetric response of carbonate-, nitrate-, chloride-, sulfate-, and sulfide-based patinas is described using sub-microsamples attached to graphite electrodes in contact with aqueous acetate buffer. Patina-characteristic voltammetric profiles are obtained for the different artificial patinas that can be recognized using the generalized Tafel analysis of the voltammetric curves. VIMP data could also provide layer-by-layer information about composition and compactness/crystallinity of the patinas for which a simplified theoretical modeling is presented., Authors gratefully acknowledge funding from Project CTQ2017-85317-C2-1-P, supported with Ministerio de Economia, Industria y Competitividad (MINECO), Fondo Europeo de Desarrollo Regional (ERDF) and Agencia Estatal de Investigacion (AEI); and project TOP-HERITAGE CM (S2018/NMT_4372) from Comunidad de Madrid and European Structural and Investment Funds. B. R.-B. and E.C. would like to professional support of the CSIC Interdisciplinary Thematic Platform "Open Heritage: Research and Society" (PTI-PAIS).
DAU Arxiu Digital de la Universitat Ramon Llull
Publication Artículo científico (JournalArticle)

Smart dual-functionalized gold nanoclusters for spatio-temporally controlled delivery of combined chemo- and photodynamic therapy

  • Nonell, Santi
  • Planas, Oriol
  • Gallavardin, Thibault
  • Nieves, Ingrid
  • Tabero, Andrea
  • Villanueva, Ángeles
We report the preparation of gold nanoclusters (AuNCs) as a delivery vehicle for the clinically approved photodynamic and chemotherapeutic agents Protoporphyrin IX (PpIX) and doxorubicin (DOX), respectively, and their effect on tumor cells. DOX was attached to the gold nanoclusters through a singlet oxygen-cleavable linker and was therefore released after PpIX irradiation with red light, contributing, synergistically with singlet oxygen, to induce cell death. The doubly functionalized AuNCs proved more effective than a combination of individually functionalized AuNCs. Unlike free DOX, the photoactive nanosystem was non-toxic in the absence of light, which paves the way to introduce a spatiotemporal control of the anticancer therapy and could contribute to reducing the undesirable side effects of DOX.
Repositorio Institucional del Instituto Madrileño de Estudios Avanzados en Nanociencia
Publication Artículo científico (JournalArticle)

The role of the diyne bond on the excited state deactivation of diyne-bridged 7-azaindoles in solution and solid state

  • Álvarez-Conde, Javier
  • Garzón-Ruiz, Andrés
  • Navarro, Amparo
  • Jiménez-Pulido, Sonia B.
  • González-Rodriguez, Pablo
  • Cabanillas González, Juan
  • García-Frutos, Eva M.
Repositorio Institucional del Instituto Madrileño de Estudios Avanzados en Nanociencia
Publication Artículo científico (JournalArticle)

Toward Electrically Pumped Organic Lasers: A Review and Outlook on Material Developments and Resonator Architectures

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Assessment of the Robustness of a Color Monitoring Chart Calibration Method for Crowdsourcing-Based Preventive Conservation

  • Barbero-Álvarez, Miguel Antonio
  • Menéndez, José Manuel
  • Rodrigo, Juan Antonio
  • Ramírez Barat, Blanca
  • Cano Díaz, Emilio
Monitoring environmental factors such as pollutants, relative humidity, light, etc. is needed to ensure a proper preventive conservation of cultural heritage. Since existing systems are expensive and difficult to maintain, we propose as a sustainable alternative the use crowdsourced photographs taken by visitors using their cell phones. These images of a tailor made panel, including sensitive materials and a calibration color chart, are calibrated and colorimetric information extracted from them. The aim of this paper is assessing the robustness of the color chart and the calibration method used, and evaluating how the ageing of the materials of the chart can affect the accuracy of the calibration process. A choice is made between four candidate materials and a set of industrial inks. Several tests have been performed and mathematical metrics extracted, so the most suitable material is adequately selected. It has been checked how the image calibration process, employed for homogenizing information from the crowdsourced pictures, performs with real-life materials and colors to assess the possible degradation that may happen. This work is a part of a bigger project with the aim of building a crowdsourcing-based monitoring system for preventive conservation of cultural heritage., Work funded by Comunidad de Madrid under project MIPAC-CM (Monitorización por procesado de imagen y ciencia ciudadana para la conservación de materiales del patrimonio cultural—Monitoring by image processing and citizen science for conservation of cultural heritage materials), project code Y2018/NMT-4913.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of the heat treatment on the microstructure and hardness evolution of a AlSi10MgCu alloy designed for laser powder bed fusion

  • Martin, Arturo
  • San Sebastián, María
  • Gil, E.
  • Wang, C.Y.
  • Milenkovic, Srdjan
  • Pérez Prado, María Teresa
  • Cepeda-Jiménez, C.M.
The aim of this work is to investigate the influence of the addition of Cu on the microstructure and on the microhardness of a laser powder bed fusion (L-PBF)-fabricated AlSi10MgCu alloy. With this goal, AlSi10Mg+4 wt%Cu pre-alloyed powder was produced by gas atomization. Following a parameter optimization study, dense as-built specimens with a high relative density of 99.8% were fabricated. An outstanding microhardness value, exceeding 180 HV, was obtained after aging at 160 °C for 16 h. This value is similar to that of the high strength Al 7075 in the T6 condition. With the aid of analytical transmission electron microscopy, it was concluded that the origin of the observed excellent mechanical behavior could be attributed to the beneficial effect of Cu in reducing the Al-matrix cell size, and in increasing the density and decreasing the size of the Si-based nanoprecipitates at cell interiors. More specifically, it is proposed that the maximum hardness is associated to the development of Cu-rich GP-I zones, which act as precursors of Si nanoprecipitates. Overaging leads to a reduction in microhardness due to transformation of these GP-I zones into coarser θ’’ precipitates and thus to a smaller volume fraction of larger Si-based nanoparticles., This work was funded by the European Union's Horizon 2020 Clean Sky 2 research and innovation program under grant agreement No 755610, project AlForAMA. The authors acknowledge the support from the topic manager, Leonardo Aircraft. CYW acknowledges the financial support from the Fundamental Research Funds for the Central Universities in China (grant number 3102019QD0415). MTPP would like to acknowledge funding from the Madrid region under the program S2018/NMT-4381-MAT4.0-CM.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Further insights on the stress equilibrium method to investigate macroscopic residual stress fields: Case of aluminum alloys cylinders

  • Millán García, Laura
  • Bokuchava, Gizo
  • Fernández, Ricardo
  • Papushkin, I.
  • González-Doncel, Gaspar
The stress equilibrium, SE, method has been shown to be a very powerful, reliable tool for calculating the un-stressed lattice parameter, a, as a critical requirement for the determination of the residual stress, RS, by diffraction techniques. The method can be used in cases where others, such as the powder or comb ones, are limited (e.g., in age-hardenable aluminum alloys components, where a can be affected). Owing to its potential, this method can address complex cases that, however, have not yet been sufficiently exploited. In particular, it makes it possible to delve into the effect of microstructural factors (e.g., texture variations) on the macroscopic residual stress, M-RS. Here, the M-RS obtained after quenching and slow cooling of cylindrical samples of aluminum alloys has been investigated. Data obtained from neutron and synchrotron radiation diffraction in AA5083 and AA2014 alloy samples (of different size), respectively, have been used. Specifically, the development of a texture gradient, a very common consequence derived from conventional manufacturing processes of components, has been taken into account. The known fact that a parabolic profile of the M-RS is obtained in cylindrical samples is used to generalize the SE method to determine a and to strengthen its quality and reliability., The authors thank Consejería de Educación e Investigación from Comunidad Autónoma de Madrid, CAM, Madrid, Spain, for the grant of Micro-Stress-MAP project, ref., Y2018/NMT-4668, and the Spanish Ministerio de Economía y Competitividad, MINECO, for the project of ref. MAT2017-R83825-C4–1-R, to which this work is linked. The FLNP of the JINR (Dubna, Russia) is acknowledged for the beam-time allocation for the experiments on FSD instrument. Support from BESSY, Berlin, for the SR experiment (proposal nº 2008-80215) on EDDI instrument is also acknowledge. Special mention also deserves the technical body of the National Center for Metallurgical Research, CENIM, for the preparation of the samples., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Residual Stress Distribution after Quenching Treatment Obtained from Diffraction Experiments and Simulation by Finite Element Method

  • Carro-Sevillano, Gabriel
  • Fernández, Ricardo
  • Bokuchava, Gizo
  • Millán García, Laura
  • González-Doncel, Gaspar
Abstract: A model found by finite element method was developed in COMSOL Multiphysics to describe the evolution of residual stress after quenching of cylindrical samples of aluminium alloys AA2014 and AA5083. The treatment consisted of annealing followed by quenching in fresh water. The thermal and mechanical properties of both alloys at the annealing and room temperatures were taken into account. A different sample size was considered for each alloy. The simulations show that the residual stress strongly depends on the yield stress and sample size. The results obtained by the finite element method were compared with the experimental residual stress profiles calculated from neutron and X-ray diffraction data., This work was supported by the Madrid’s Community (project Y2018/NMT-4668 Micro-Stress-MAP-CM) and the Ministry of Science and Innovation of Spain (project MAT2017-83825-C4-1-R). Neutron and synchrotron diffraction data were obtained in collaboration with the Frank Laboratory of Neutron Physics (Dubna, Russia) and the BESSY II synchrotron at the Helmholtz Zentrum. COMSOL software was provided by the Spanish National Research Council, C.S.I.C.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Study of Microscopic Residual Stresses in an Extruded Aluminium Alloy Sample after Thermal Treatment

  • Millán García, Laura
  • Bokuchava, Gizo
  • Hidalgo, J.I.
  • Fernández, Ricardo
  • Kronberger, Gabriel
  • Halodova, Patrice
  • Sáez, A.
  • Papushkin, I.
  • Garnica, Oscar
  • Lanchares, Juan
  • González-Doncel, Gaspar
Abstract: A method is proposed to calculate the microscopic residual stresses in extruded cylindrical samples of non-ageing aluminium alloy 5083 (Al–Mg), arising from quenching in fresh water from 530°C. We start from the premise that the alloy is single-phase and non-isotropic on a microscopic scale; it consists of many grains that exhibit different mechanical response depending on their crystallographic orientation and neighboring grains. Microscopic residual stresses depend on the applied heat treatment, microstructure and mechanical strength of the individual grains. The stresses were calculated from neutron diffraction data. Genetic programming algorithms were used to calculate microscopic residual stresses, considering that each diffraction peak describes the stress distribution of a group of grains having a certain orientation, size and environment. The algorithm assigns a stress value to each grain according to the distribution of the diffraction peaks and the microstructural parameters of these grains., This work was supported by the Madrid Regional Government-FEDER grant Y2018/NMT-4668 (Micro-Stress-MAP-CM) and the project MAT2017-83825-C4-1-R. We would also like to express our gratitude to FLNR-JINP for the beam time allocated on the FSD instrument, and to the HeuristicLab Software developers.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The relation between ductility at high temperature and solid solution in Mg alloys

  • Cepeda-Jiménez, C.M.
  • Shi, D.F.
  • Pérez Prado, María Teresa
This work investigates the effect of solid solution on ductility and on the activation of individual deformation mechanisms at moderate temperatures and at quasi-static strain rates in Mg-Zn and Mg-Al alloys. With that aim, four solid solution Mg-Zn and Mg-Al binary alloy ingots containing 1 and 2 wt.% solute atoms were subjected to hot rolling and subsequent annealing to generate polycrystals with similar average grain size and basal-type texture for each composition. The activity of the different slip systems after tensile testing at 150°C and at 250°C was evaluated in pure Mg and in the alloys by EBSD-assisted slip trace analysis. In addition, segregation of Zn and Al atoms at grain boundaries during the thermo-mechanical processing was characterized by HAADF-STEM and EDX. It was found that while the addition of Al and Zn atoms to pure Mg does not lead to major changes in the mechanical strength at the investigated temperatures, it does enhance ductility significantly, especially at 250°C. Our results show that this increase in ductility cannot be attributed to a higher activation of non-basal systems in the alloys, as reported earlier, as the incidence of non-basal systems is indeed considerably higher in pure Mg. This work suggests, on the contrary, that the ductility increase may be attributed to the presence of a more homogenous basal activity in the alloys due to a lower degree of orientation clustering, to grain boundary solute segregation, and to a higher slip diffusivity at grain interiors., The research leading to these results has received funding from the Madrid region under programme S2018/NMT-4381-MAT4.0-CM project. Funding from projects PID2019-111285RB-I00 and PID2020-118626RB-I00 awarded by the Spanish Ministry of Science, Innovation and Universities, is also acknowledged. DFS acknowledges the financial support from the China Scholarship Council (Grant no 201706050154).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of Magnesium Addition and High Energy Processing on the Degradation Behavior of Iron Powder in Modified Hanks’ Solution for Bioabsorbable Implant Applications

  • Estrada, Rafael Guillermo
  • Multigner, M.
  • Lieblich, Marcela
  • Fajardo, Santiago
  • Rams Ramos, Joaquín
This paper shows the results of applying a combination of high energy processing and magnesium (Mg) as an alloying element in a strategy for enhancing the degradation rate of iron (Fe) for applications in the field of non-permanent medical implants. For this purpose, Fe powder was milled with 5 wt% of Mg (Fe5Mg) and its microstructure and characterized degradation behavior. As-received Fe powder was also milled in order to distinguish between the effects due to high energy processing from those due to the presence of Mg. The powders were prepared by high energy planetary ball milling for 16 h. The results show that the initial crystallite size diminishes from >150 nm to 16 nm for Fe and 46 nm for Fe5Mg. Static degradation tests of loose powder particles were performed in Hanks’ solution. Visual inspection of the immersed powders and the X-ray diffraction (XRD) phase quantification indicate that Fe5Mg exhibited the highest degradation rate followed by milled Fe and as received Fe, in this order. The analysis of degradation products of Fe5Mg showed that they consist on magnesium ferrite and pyroaurite, which are known to present good biocompatibility and low toxicity. Differences in structural features and degradation behaviors of milled Fe and milled Fe5Mg suggest the effective dissolution of Mg in the Fe lattice. Based on the obtained results, it can be said that Fe5Mg powder would be a suitable candidate for non-permanent medical implants with a higher degradation rate than Fe., Financial support of the Ministry of Science and Innovation of Spain (MICINN) PID2019-104351GB-C21, PCIN-2017-036 (M-era.Net2016:4128, EU-FEDER), and RTI2018-096391-B-C31, and Comunidad de Madrid ADITIMAT-CM (S2018/NMT-4411) are greatly acknowledged. R. Estrada thanks MICINN for FPI grant PRE2020-092118, and S. Fajardo expresses his gratitude to the State Research Agency (MICINN), the Spanish National Research Council (CSIC), and the European Regional Development Fund (ERDF) for their support under project RYC2019-027006-I (AEI/FEDER/UE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dislocation substructures in pure aluminium after creep deformation as studied by electron backscatter diffraction

  • Serrano-Muñoz, Itziar
  • Fernández, Ricardo
  • Saliwan-Neumann, R.
  • González-Doncel, Gaspar
  • Bruno, Giovanni
In the present work, electron backscatter diffraction was used to determine the microscopic dislocation structures generated during creep (with tests interrupted at the steady state) in pure 99.8% aluminium. This material was investigated at two different stress levels, corresponding to the power-law and power-law breakdown regimes. The results show that the formation of subgrain cellular structures occurs independently of the crystallographic orientation. However, the density of these cellular structures strongly depends on the grain crystallographic orientation with respect to the tensile axis direction, with 111 grains exhibiting the highest densities at both stress levels. It is proposed that this behaviour is due to the influence of intergranular stresses, which is different in 111 and 001 grains., This project was partially financed by the Spanish MINECO program, corresponding to Project MAT2017-83825-C4-1-R, and by the project Y2018/NMT-4668 Micro-Stress-MAP-C from Comunidad Autónoma de Madrid, Spain.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Coexisting magnetic orders and concomitant Morin-like transition and relaxor behavior in multiferroic Aurivillius Bi4Ti3 - 2xNbxFexO12compounds

  • Algueró, Miguel
  • Pérez del Real, Rafael
  • Amorín, Harvey
  • Castro, Alicia
[EN] Aurivillius layered oxides with general formula (Bi2O2)(Am-1BmO3m+1) stand out among room-temperature magnetoelectric multiferroics for their large magnetization. However, despite extensive research, there is an obvious lack of understanding of their magnetism. The chemical design strategy for obtaining multiferroism involves the incorporation of M3+ magnetic cations at the B-site of well-known ferroelectric compounds such as Bi4Ti3O12 (m = 3). We report here a study of the magnetism and dielectric properties of Aurivillius Bi4Ti3 - 2xNbxFexO12 phases with x ≥ 1 up to 1.2, which correspond to magnetic cation fractions at the B site between 0.33 and 0.4 above the threshold for percolation. This is a three-layer system, less prone to the formation of intergrowths, which nominally contains Fe3+ as single magnetic species. Despite that, a rich phenomenology is uncovered. Coexisting magnetic orders are present in the Aurivillius compounds, and a Morin-like transition takes place at low temperatures. The dielectric characterization does not show any associated anomaly that could indicate a polymorphic phase transition but the appearance of relaxor-like characteristics. Possible scenarios are discussed, which involve the presence of Fe2+, cation partitioning between nonequivalent B-sites, and the development of polar nanodomains within a ferroelectric phase at a spin reorientation transition., Research funded by Spanish MICINN through Project No. MAT2017-88788-R. Technical support by Ms. I. Martínez at ICMM-CSIC was also recognized. Part of the FEG-SEM experiments were carried out as service from the MiNa Laboratory at IMN, which acknowledges funding from CM (Project No. S2018/NMT-4291 TEC2SPACE), MINECO (Project No. CSIC13-4E-1794), and EU (FEDER, FSE), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Aqueous colloidal processing of W and WC-based composites, sintering and mechanical properties at high temperature

  • García Ayala, Esperanza Macarena
E. M. Garcia-Ayala, Z. Gonzalez, B. Ferrari, J. Y. Pastor, A. J. Sanchez-Herencia, Colloidal Approach to the Additive Manufacturing of W-based Materials, in: EuroPM 2018 Proceedings (2020) ISBN: 978-1-899072-50-7. E.M. Garcia-Ayala, S. Tarancon, B. Ferrari, J.Y. Pastor, A.J. Sanchez-Herencia, "Thermomechanical behaviour of WC-W2C composites at first wall in fusion conditions", Int. J. Refract Metal. Hard Mater., 98 105565 (2021). DOI: 10.1016/j.ijrmhm.2021.105565 E.M.Garcia-Ayala, L.Silvestroni, J.Yus, B.Ferrari, J.Y.Pastor and A.J.Sanchez-Herencia"Colloidal processing and sintering of WC-based ceramics with low Ni content as sintering aid", J. Eur. Ceram. Soc, 41 (3) 1848, -1858 (2021).DOI: 10.1016/j.jeurceramsoc.2020.10.038 M.E. Garcia-Ayala, S. Tarancon, Z. Gonzalez, B. Ferrari, J.Y. Pastor, A.J. Sanchez-Herencia, "Processing of WC/W composites for extreme environments by colloidal dispersion of powders and SPS sintering",Int. J. Refract. Met. Hard Mater., 84,105026 ( 2019,)DOI:10.1016/j.ijrmhm.2019.105026, [EN] There have been many advanced technologies that operates at high temperature under severe conditions, such as those over the inner walls of the future fusion nuclear reactor (ITER, DEMO, etc.). Refractory metals such as tungsten are proposed as optimum materials to face these conditions. Pure ceramics, such as WC and metal ceramics are proposed also as alternative materials for the components that require operate at high temperature under high wear conditions or neutronic damage. For that reason, the design of complex compositions and microstructures is necessary to achieve reliable materials under these conditions. That makes this work investigate on colloidal processing W and WC materials, as well as their composites with nickel for softening of the sintering conditions. Aqueous colloidal processing is proposed as an alternative to the solvent-less techniques. By the study of zeta potential and chemical analysis of powders suspended in water the optimal conditions for high solid content suspension preparation were determined at different pH conditions and considering the use a cationic dispersant (polyethyleneimine, PEI). The rheological studies have determined the maximum solid content through the Krieger-Dougherty model adjustment, so the time spent removing water after powder preparation can be diminished. Three different types of composite powders were prepared: WC-W, WC-Ni and W-Ni. For WC-W composites, the amount of metallic phase was fixed in 10, 20 and 50 vol.%, while for WC-Ni and W-Ni mixtures, the amount of metallic nickel phase was 5 vol.% (3 wt.%). Three different sintering methods are used: Spark Plasma Sintering (SPS), Hot-Press Sintering (HPS) and Vacuum Sintering (VS). WC-W materials were sintered by SPS at 1700 and 1800 oC for 10 min and 60 MPa. The crystalline and chemical studies determined the high reactivity between W and WC during the thermal cycle, which gives place to the presence of a third species: tungsten semicarbide (W2C), which provoked all the W consumption. Mechanical tests at high temperatures for the W2C/WC composites demonstrated their excellent properties and performance at conditions similar to the ITER divertor walls. A self-reinforcement behaviour due to the appearing of metallic tungsten in the microstructure as the temperature approach to 1200 ºC is described. On the other hand, mixture of WC with Ni and W with Ni, obtained by aqueous colloidal processing were sintered by the three mentioned sintering techniques and the differences between them studied. Two types of Ni powders were used: a commercial nickel (cNi) and a nanometric nickel synthesized in the lab (nNi). WC-Ni sintered by HPS achieved a density higher than 98%, which was not the case of SPS and VS sintered samples. SEM/EDX observations demonstrated that sintering was by a solution-precipitation mechanism that leaved the nickel located in the grain junctions, while there were slight carbon precipitations favoured by the thermodynamical conditions during the thermal cycle. For W-Ni alloys, successful results were obtained from VS process, achieving 96% density and a fully dense microstructure. In this case, W and Ni reacts while thermal treatment, giving an intermetallic species: NiW. For both WC-Ni and W-Ni materials, the presence of small amounts of Ni showed a clear softening of sintering conditions, which make the sintering of W and WC an affordable method for wide productions in terms of both technology and economic cost. Mechanical tests of these composites exhibited a ductilisation of the materials due to the presence of the nickel phase, which matches to the data found in the literature for this type of composites and alloys., [ES] Existen multitudes de tecnologías avanzadas capaces de operar a alta temperatura bajo condiciones severas, como aquellos que conforman las paredes interiores de futuros reactores de fusión nuclear (ITER, DEMO, etc.). Los metales refractarios como el wolframio se proponen como los materiales óptimos para trabajar bajo estas condiciones. Los cerámicos puros, como el WC, y los composites cerámica-metal (cermets) también se presentan como claras alternativas para aquellos materiales requeridos para operaciones a alta temperatura, bajo alto desgaste o radiación neutrónica. Por este motivo, el diseño de composiciones complejas y microestructuras es necesario para lograr la preparación de materiales que trabajen en dichas condiciones. Todo ello hace que se profundice en la Investigación de materiales de W y WC formulados por procesamiento coloidal, así como sus materiales compuestos con níquel metálico para suavizar sus condiciones de sinterización. El procesamiento coloidal en base acuosa se propone como una fuerte alternativa a las tradicionales técnicas sin disolvente (en seco). Mediante el estudio del potencial zeta y el análisis químico de los polvos suspendidos en agua, las condiciones óptimas para la preparación de suspensiones con alto contenido en sólidos se determinaron a diferentes valores de pH, y considerando el uso de un dispersante catiónico (polietilenimina o PEI). Los estudios reológicos determinaron el máximo contenido en sólidos mediante el ajuste de Krieger-Dougherty, de tal forma que se lograba disminuir el tiempo de eliminación de disolvente. Se prepararon tres tipos diferentes de polvos compuestos: WC-W, WC-Ni y W-Ni. Para los composites WC-W, la cantidad de fase metálica se fijó en 10, 20 y 50 vol.%, mientras que para las mezclas WC-Ni y W-Ni, la cantidad de níquel metálico fue de un 5 vol.% (3% en peso). Se emplearon tres métodos distintos de sinterización: Sinterización asistida por Corriente Pulsada (SPS), Sinterización por presión asistida en caliente (HPS) y Sinterización a vacío (VS). Los materiales de WC-W se sinterizaron por SPS a 1700 y 1800 oC durante 10 minutos, a 60 MPa de presión. Los estudios químicos y de cristalinidad determinaron la alta reactividad entre W y WC durante el ciclo térmico, el cual dio lugar a la aparición de una tercera especie: el semicarburo de wolframio (W2C), lo que provocó el agotamiento total del wolframio metálico. Los ensayos mecánicos a alta temperatura para los compuestos W2C/WC demostraron sus excelentes propiedades a condiciones similares a las del divertor del ITER. Se describe un comportamiento de refuerzo mecánico debido a la aparición de wolframio metálico en la microestructura, a medida que se describe un ascenso de la temperatura hasta los 1200 oC. Por otra parte, las mezclas de WC con Ni, y W con Ni, obtenidas mediante procesamiento coloidal en agua, se sinterizaron a través de las tres técnicas ya mencionadas, por lo que se estudiaron los diferentes resultados. Se usaron dos tipos de polvo de Ni: un níquel comercial (cNi), y un níquel nanométrico sintetizado en el laboratorio (nNi). WC-Ni se sinterizó por HPS, logrando una densidad mayor al 98%, lo que no ocurrió en el caso de las muestras sinterizadas por SPS y VS. Los análisis por SEM/EDX demostraron que la sinterización seguía un mecanismo de disolución-precipitación, lo que provocó la localización del níquel metálico en los límites de grano, mientras que aparecieron algunas precipitaciones de grafito favorecidas por las condiciones termodinámicas durante el ciclo térmico. Para las aleaciones W-Ni, se obtuvieron resultados bastante exitosos para el proceso de sinterización a vacío (VS), alcanzando densidades superiores al 96%, así como una microestructura consolidada y totalmente densificada. En este caso, W y Ni reaccionan durante el tratamiento térmico, dando lugar a una nueva especie: el intermetálico NiW. Para ambos composites WC-Ni y W-Ni, la presencia de pequeñas cantidades de Ni mostró un claro suavizamiento de las condiciones de sinterización, lo que hace que la sinterización de W y WC se conciba como un método asequible para grandes producciones a escala industrial en términos tanto tecnológicos como económicos. Los ensayos mecánicos de estos materiales exhibieron una clara ductilización debido a la presencia de fase níquel, lo que coincide con los datos encontrados en la literatura para este tipo de composites y aleaciones., Esta tesis se enmarca en el proyecto MAT2015-70780-C4-1-P del plan nacional, titulada “Procesamiento coloidal en medio acuoso de composites en base W y WC, sinterización y propiedades mecánicas a alta temperatura”. Este trabajo se ha desarrollado combinando las principales líneas de investigación de los dos grupos en los cuales se ha llevado a cabo el trabajo experimental: la Química Coloidal desarrollada por el grupo Tailoring through Colloidal Processing (ICV-CSIC), y el conocimiento sobre propiedades mecánicas del grupo CIME (UPM).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Layer Shape LiFePO4 Obtained by Powder Extrusion Molding as Solid Boosters for Ferro/Ferricyanide Catholyte in Semisolid Redox Flow Battery: Effect of Porosity and Shape

  • Vivo-Vilches, José F.
  • Vázquez-Navalmoral, Álvaro
  • Torre-Gamarra, Carmen de la
  • Cebollada Borao, Jesús
  • Várez, Alejandro
  • Levenfeld, Belén
[EN] Powder extrusion molding is proposed to fabricate ceramic LiFePO layers (0.5–1.0 mm thickness) as solid booster for ferricyanide electrolyte in semisolid redox flow battery. In some extruded layers, the binder is partially decomposed, while in others it is completely removed and, afterwards, the material is sintered, so materials with different porosity and dimensions are obtained. After characterizing the materials, the kinetics for the reaction with ferricyanide is evaluated, being the binder-less materials the ones which react faster and reach larger degrees of oxidation. For the material with 1.0 mm thick comparable results to the ones already published are obtained (69 % capacity for LiFePO compared to the theoretical value). In the case of the 0.5 mm thick sintered solid, an outstanding performance is achieved, reaching almost the theoretical capacity (94 %) with a very high coulombic efficiency (>99 %) at 1 mA cm, results that were only obtained at much lower current densities in previous works., CONEX-Plus programme funded by Universidad CarlosIII de Madrid and the European Union’s Horizon 2020 research and innovation programme under the MarieSklodowska-Curie grant agreement No. 801538.The authors also thank the Agencia Española de Investigación/Fondo Europeo de Desarrollo Regional(FEDER/UE)for funding the project PID2019-106662RB-C43.This work has also beensupported by Comunidad de Madrid(Spain) though two project:multi annual agreement with UC3M (“Excelencia para el ProfesoradoUniversitario”– EPUC3M04)– Fifth regional research plan 2016–2020,and DROMADER-CM(Y2020/NMT6584)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Novel one-pot sol-gel synthesis route of Fe3C/few-layered graphene core/shell nanoparticles embedded in a carbon matrix

  • Castellano-Soria, Alberto
  • López-Sánchez, Jesús
  • Granados-Miralles, Cecilia
  • Varela, María
  • Navarro, Elena
  • González, César
  • Marín, Pilar
[EN] Fe3C/few-layered graphene core/shell nanoparticles embedded in a carbon matrix are synthesized by a novel two-step surfactant sol-gel strategy, where the processes of hydrolysis, polycondensation and drying take place in a one-pot. The present approach is based on the combined action of oleic acid and oleylamine, which act sterically on the precursor micelles when a densification temperature is performed in a reducing atmosphere. The structural and magnetic evolution of the formed compounds is investigated, ranging from iron oxides such as Fe3O4 and FeO, to the formation of pure Fe3C/C samples from 700 ºC onwards. Interestingly, Fe3C nanoparticles with a size of ~20 nm crystallize immersed in the carbon matrix and the surrounding environment forms an oriented encapsulation built by few-layered graphene. The nanostructures show a saturation magnetization of ~43 emu/g and a moderate coercivity of ~500 Oe. Thereby, an innovative chemical route to produce single phase Fe3C nanoparticles is described, and an effective method of few-layered graphene passivation is proposed, yielding a product with a high magnetic response and high chemical stability against environmental corrosion., Ministerio de Ciencia de Innovación (MCINN), Spain, through the projects: MAT2015–65445-C2–1-R, MAT2017–86450-C4–1-R, MAT2015–67557-C2–1-P, RTI2018–095856-B-C21, RTI2018–095303-A-C52, PIE: 2021-60-E030, PIE: 2010–6-OE-013; and Comunidad de Madrid, Spain, by S2013/MIT-2850 NANOFRONTMAG and S2018/NMT-4321 NANOMAGCOST. The authors are also grateful for the electron microscopy characterization performed in the Centro Nacional de Microscopía Electrónica at the Universidad Complutense de Madrid (ICTS ELECMI, UCM), support from MCINN grant # RTI2018–097895-B-43. C.G.-M. acknowledges the financial support from MICINN through the “Juan de la Cierva” Program (FJC2018–035532-I).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Implementing a sol-gel route to adjust the structural and dielectric characteristics of Bi and Fe co-doped BaTiO3 ceramics

  • Gouadria, Hamida
  • Smari, Mourad
  • Mnasri, Taoufik
  • Necib, Jallouli
  • López-Sánchez, Jesús
  • Marín, Pilar
  • Jamale, Atul P.
  • Younes, Rached Ben
[EN] The present work explores the impact of Fe insertion on the physical properties of Ba0.95Bi0.05Ti1-xFexO3 (x = 0.025, 0.050, and 0.075) prepared via sol gel method. The resulting samples crystallize in the tetragonal structure with space group P4mm and their morphological features point out the variation of the microstructure with Fe content. In turn, the dielectric constant versus temperature plot reveals the existence of two transition phases: the first one is ferroelectric-paraelectric transition phase (TF-P) and the second one is ferroelectric orthorhombic - ferroelectric tetragonal phase (TO-T). Analysis of conductivity curves using Jonscher’s augmented equation (for x = 0.025) and Jonscher’s power law (for x = 0.075) suggests the Non-Overlapping Small Polaron Tunneling (NSPT) model as a conduction mechanism., Hamida Gouadria acknowledges funding from the Tunisian Ministry of Higher Education and Scientific Research. Mourad Smari acknowledges the financial support from the Program Ulam NAWA (Polish National Agency for Academic Exchange) under the project BPN/ULM/ 2021/1/00015/U/00001. Jesús L´opez S´anchez receives funding from the Ministerio de Asuntos Econ´omicos y Transformaci´on Digital (MINECO) through the project PID2020-114192RB-C41. Pilar Marín acknowledges the financial support from the Ministerio de Ciencia e Innovaci´on (MICINN) through the project RTI2018-095856-B-C21 and Comunidad de Madrid by S2018/NMT-4321 "NANOMAGCOST"., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Contribution of the Fe-rich phase particles to the high temperature mechanical behaviour of an Al-Cu-Fe alloy

  • Zhao, Y.
  • He, W.
  • Medina, Judit
  • Song. D.
  • Sun, Zhenzhong
  • Xue, Y.
  • González-Doncel, Gaspar
  • Fernández, Ricardo
The high temperature strengthening mechanisms in Al-Cu-Fe aluminium alloy was analysed basis on a comprehensive microstructural study of the as-cast alloy and mechanical testing results. An approach which extracts the specific contribution of solid solution atoms, precipitates, and Fe-rich particles to the creep strengthening was utilized. Additionally, the Shear Lag model, was employed to account for the contribution to strengthening of the Fe-rich intermetallic particles through a load transfer mechanism. For this study, an as-cast Al-Cu alloy, which does not contain Fe impurities, has been also used for comparative purposes. The findings suggest that the large and 3D interconnected Fe-rich phase particles (Al(MnFe) and α-Fe) generate the main strengthening effect at high temperature through a load transfer mechanism, whereas the contribution of the nanometric AlCuMg precipitates were very limited., This work was supported by the Natural Science Foundation of China (52104373). We would also would like to thank the WL13HB beamline in the Shanghai Synchrotron Radiation Facility (SSRF), China, for provision of synchrotron radiation beamtime. The authors thanks to access TEM facility in the Spanish National Centre for Electron Microscopy (ICTS) at Complutense University of Madrid, Spain. Y. Zhao thanks China Scholarship Council for providing financial support during the visiting in CENIM-CSIC, Spain. The authors thanks D.C. Dunand at Northwest University for providing comparison experimental data in this study. Two of the authors, RF and GG-D, from CENIM, also acknowledge support from Madrid Regional Government-FEDER grant Y2018/NMT-4668 (Micro-Stress-MAP-CM) and project MAT2017–83825-C4–1-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Review and interlaboratory comparison of the Oddy test methodology

  • Díaz, Iván
  • Alvarez-Martin, Alba
  • Grau-Bové, Josep
  • Norrehed, Sara
  • Salvadori, B.
  • Kraševec, Ida
  • Duran-Romero, D.
  • Cano Díaz, Emilio
Since the introduction of the Oddy test in 1973, many museums and cultural institutions have put the method in use, developing their own versions and protocols. Currently the 3-in-1 version, temperature at 60 ºC and 2 g of tested material are set as common practice; however, other variables of the test are not standardized. The purpose of this study is to examine current versions of the Oddy test, to identify differences in the results derived from variations in the procedures, and ultimately raising awareness within the conservation community to work together towards a standardized protocol. In this article, we review the available information on the methodological differences in Oddy test protocols published in the literature related to glassware cleaning, coupon preparation, reaction vessel setup and rating of materials. Based on the review, and to highlight the many variables that could affect the results of the test, seven European cultural institutions working under the H2020 IPERION HS project performed a comparative 3-in-1 Oddy test by blindly evaluating the same ten materials. Each institution used its own test methodology but some guidelines were advised: (1) Detergents as a cleaning procedure for glassware, (2) P600 sandpaper or micromesh pad close to 1500 to prepare metal coupons and (3) 1:100 as water–air ratio. Despite this, differences between institutions’ results were still observed. Some of them are due to the differences in the coupons preparation, either in the sanding pattern or in the edge area. In order to separate the contribution of the experimental setup and the subjectivity of the evaluation in the discrepancies, coupons from all institutions have been rated by a single team of judges with experience in the Oddy Test. Results show that differences in the evaluation criteria play a relevant role in the discrepancies of the results, especially for institutions with less experience in the test. These results highlight the need to further standardize the methodology and criteria for visual assessment. Nevertheless, the Oddy test has been found to be reliable for the identification of materials that produce emissions hazardous for the conservation of cultural assets., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This research has been funded by the projects IPERION HS (European Union’s Horizon 2020 research and innovation programme, grant agreement No 871034) and TOP-HERITAGE CM (Comunidad de Madrid and European Structural Funds, Ref. S2018/NMT4372).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Steering Hydrocarbon Selectivity in CO2 Electroreduction over Soft-Landed CuOx Nanoparticle-Functionalized Gas Diffusion Electrodes

  • Daems, Nick
  • Choukroun, Daniel
  • Merino, Pablo
  • Rettenmaier, Clara
  • Pacquets, Lien
  • Bergmann, Arno
  • Santoro, Gonzalo
  • Vázquez Burgos, Luis
  • Martínez Orellana, Lidia
  • Roldan Cuenya, Beatriz
  • Martín-Gago, José A.
  • Breugelmans, Tom
The use of physical vapor deposition methods in the fabrication of catalyst layers holds promise for enhancing the efficiency of future carbon capture and utilization processes such as the CO2 reduction reaction (CO2RR). Following that line of research, we report in this work the application of a sputter gas aggregation source (SGAS) and a multiple ion cluster source type apparatus, for the controlled synthesis of CuOx nanoparticles (NPs) atop gas diffusion electrodes. By varying the mass loading, we achieve control over the balance between methanation and multicarbon formation in a gas-fed CO2 electrolyzer and obtain peak CH4 partial current densities of −143 mA cm–2 (mass activity of 7.2 kA/g) with a Faradaic efficiency (FE) of 48% and multicarbon partial current densities of −231 mA cm–2 at 76% FE (FEC = 56%). Using atomic force microscopy, electron microscopy, and quasi in situ X-ray photoelectron spectroscopy, we trace back the divergence in hydrocarbon selectivity to differences in NP film morphology and rule out the influence of both the NP size (3–15 nm, >20 μg cm–2) and in situ oxidation state. We show that the combination of the O2 flow rate to the aggregation zone during NP growth and deposition time, which affect the NP production rate and mass loading, respectively, gives rise to the formation of either densely packed CuOx NPs or rough three-dimensional networks made from CuOx NP building blocks, which in turn affects the governing CO2RR mechanism. This study highlights the potential held by SGAS-generated NP films for future CO2RR catalyst layer optimization and upscaling, where the NPs’ tunable properties, homogeneity, and the complete absence of organic capping agents may prove invaluable. © 2022 American Chemical Society, The authors would like to thank María Elena Casero Junquera from the department of Analytical Chemistry and Instrumental Analysis at the Universidad Autonoma de Madrid, Sara Bals of the Electron Microscopy for Materials Science (EMAT) and Bart Van der Bruggen of the ProcESS lab at the KU Leuven for providing access to their lab infrastructure. N.D. and L.P. acknowledge sponsoring from the research foundation of Flanders (FWO, grants 12Y3919N and 1S56920N). We thank the European Research Council for funding support under Synergy grant ERC-2013-SyG, G.A. 610256 (NANOCOSMOS). Also, we acknowledge support from the Spanish MINECO through grants MAT2017-85089-c2-1R and support from the FotoArt-CM Project (P2018/NMT 4367) through the Program of R&D activities between research groups in Technologies 2013, co-financed by European Structural Funds. CR, AB and BRC acknowledge funding from the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation)– project no. 406944504 – SPP 2080 and the European Research Council (ERC-725915, OPERANDOCAT)., Supporting Information, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Surface Engineered 2D-β-ketoenamine Covalent Organic Framework for Superior Dechlorination via Hybrid Capacitive Deionization

  • Aldaqqa, N.M.
  • Kumar, S.
  • Martínez, José I.
  • Elmerhi, N.
  • Alhseinat, E.
  • Shetty, D.
To prevent a global water shortage crisis, we must innovate to desalinate seawater. Hybrid capacitive deionization (HCDI), an energy-efficient desalination method, depends on electrode materials. Removing chloride ions (Cl−), a key salinity factor, is vital for balanced electrode capacity. Yet, efforts focus mainly on cathode materials for Na+ capture, limiting the progress of electrochemical desalination. Herein, we have developed a covalent organic framework (COF)-based redox-active anode material with excellent chemical stability and unique pseudocapacitive behavior. In the HCDI cell, the rationally designed material showed a remarkable chloride ion removal capacity (Cl-RC) of 71.5 mg g−1 in 1300 ppm saline solution with a noteworthy removal capacity rate (Cl− RCR) of 1.85 mg g−1 min−1, while maintaining 98.7% capacity retention over 30 cycles. Under optimized conditions, the COF electrode displayed a high selectivity toward Cl− over other anions present in real-seawater samples with Cl-RC of 89 mg g−1, implying its practical applicability. To the best of our knowledge, this work represents the first example of a purposefully functionalized COF serving as an anode in HCDI, highlighting the promising role of COFs in advancing capacitive deionization technologies. © 2025 The Author(s). Angewandte Chemie International Edition published by Wiley-VCH GmbH., NMA and NE acknowledge Khalifa University for PhD fellowship. SK and DS acknowledge Khalifa University, Abu Dhabi (UAE) for the generous support of this research. NMA acknowledges Safa Gaber for collecting TEM images, Abeer F. Shunnar for collecting TGA data, and Gisha for NMR data acquisition. DS acknowledges the financial support from the Khalifa University Competitive Internal Research Award (CIRA-2021) and the resource support under the Center for Catalysis and Separations (CeCaS, grantRCII-2018–024). JIM acknowledges MICIU funding (Grants PID2023-149077OBC31, TED2021-12941A-I00 and PLEC2021-007906 funded by MCIN/AEI/10.13039/501100011033 and by the ’European Union NextGenerationEU/PRTR’), and CAM (Grants FOTOSURF-CM: Y2020/NMT-6469 and SYNMOLMATCM: TEC-2024/TEC-459)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced selective gold recovery from e-waste via synergistic hetero-atom controlled quasi-planar benzoxazine-based covalent organic frameworks

  • Kumar, S.
  • Bashri, M.
  • Gaber, S.
  • Martínez, José I.
  • O’Connor, M.J.
  • Varghese, S.
  • Belec, B.
  • Luckachan, G.E.
  • Shetty, D.
Efficient and selective gold recycling from e-waste mixtures is crucial for advancing sustainability, the circular economy, and waste management objectives. However, the complex composition of e-waste and the underdeveloped practical potential of current adsorbents highlight the need for innovative sorbent development. Here, we present quasi-planar, benzoxazine-core-based two-dimensional covalent organic frameworks (COFs) with synergistic hetero-atom control across the network, achieved via a multi-component synthetic approach. These COFs, designed with specific gold interaction sites, were explored for the highly selective recovery of gold from real e-waste mixtures. By tuning the hetero-atom distribution, we achieved an impressive gold uptake capacity of 3467 mg g−1 and over 92% selectivity in presence of 12 competing metal ions from e-waste leachate. These findings underscore the critical role of molecular-level engineering in COF sorbents, paving the way for the practical recovery of noble metals from e-waste. © 2025 The Royal Society of Chemistry., Sushil Kumar and Dinesh Shetty acknowledge Khalifa University of Science & Technology, Abu Dhabi (UAE) for the generous support of this research. Sushil Kumar acknowledges Safa Gaber for SEM and TEM data collection, Jose I Martinez for theoretical studies, Matthew J O’Connor for ICP analysis, Sabu Varghese and Gisha Elizabeth Luckachan for solid-state NMR studies, and Blaž Belec for BET studies. Core Technologies Platform (CTP) at New York University Abu Dhabi for the ICP and solid-state NMR instrumentation. Dinesh Shetty acknowledges the financial support from the Khalifa University Competitive Internal Research Award (CIRA-2021) and resource support under the Center for Catalysis and Separations (CeCaS, grantRCII-2018-024). Mahira Bashri and Safa Gaber acknowledge Khalifa University of Science & Technology for PhD fellowship. José I Martínez acknowledges MICIU funding (Grants PID2023-149077OB-C31, TED2021-12941A-I00 and PLEC2021-007906 funded by MCIN/AEI/10.13039/501100011033 and by the ’European Union Next GenerationEU/PRTR’), and CAM (Grants FOTOSURF-CM: Y2020/NMT-6469, SYNMOLMAT-CM: TEC-2024/TEC-459). Blaž Belec acknowledges ARIS P2-0412 programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Management of pulse chirp and duration in femtosecond mode-locked ultralong ring fiber lasers

  • Cáceres-Pablo, Inés
  • Rosado, Alejandro
  • Hernández-Martín, Laura
  • Corredera, Pedro
  • Ania Castañón, Juan Diego
[Data Statement] Data will be made available on request., The accumulation of pulse chirp in ultralong ultrafast ring fiber lasers and its effect is investigated both experimentally and numerically. The study examines cavities up to 10 km in length, operating under fundamental mode-locking conditions, with and without Raman amplification. Repetition rates range from 6 MHz for the shortest cavity to 20 kHz for the longest, with pulse durations in the femtosecond range. The results confirm that longer cavities lead to a greater accumulation of chirp due to an increased deviation from ideal soliton propagation. Furthermore, both simulations and experimental results show that chirp accumulation can be partially mitigated by optimizing distributed Raman amplification to manage nonlinearities, thereby reducing pulse duration, increasing peak power, and approaching transform-limited pulses. further contributes to the high versatility and applicability of ultralong ultrafast lasers, which offer a wide range of operational regimes for a fixed cavity length. Targeted pulse characteristics can be achieved simply by adjusting the gain, without modifying the laser setup., Ministerio de Ciencia, Innovación y Universidades (Grants TED2021- 131957B-100, PID2021-1234590B–C21 and PID2021-128000OB-C21) and the European Regional Development Fund “A way of making Europe”; Comunidad de Madrid – Fondos FEDER (S2018/NMT-4326, SINFOTON2-CM). A. Rosado acknowledge support from ‘‘Ayudas Margarita Salas para la formación de jovenes doctores’’ from Universidad Politécnica de Madrid, financed by European Union - NextGenerationEU, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Visible-light-driven C–H functionalization of double bonds with diazo compounds under mild reaction conditions

  • Valle-Amores, Miguel A.
  • Carli, Benedetta
  • MacLean, Ian
  • Martínez-Fernández, Lara
  • Pérez-Ruíz, Raúl
  • Marzo, Leyre
  • Fraile, Alberto
  • Alemán, José
Expanding the toolbox of C–H functionalization reactions applicable to the late-stage modification of complex molecules of interest in medicinal chemistry is a key strategy for drug development. Herein, we report an unusual visible-light-induced olefinic C(sp<sup>2</sup>)–H functionalization of olefins with diazo derivatives using an Ir(iii) photocatalyst. The approach demonstrates the potential for targeting double bonds, such as those present in enol ethers, and has been further applied to 1,1-disubstituted alkenes. This efficient methodology affords unprecedented Heck-type products in good to excellent yields under mild conditions. Further derivatizations of the final products are shown to demonstrate the robustness of the methodology. The reaction pathway was validated through electrochemical and photophysical experiments as well as computational studies., Financial support was provided by the Spanish Government (PID2021-122299NB-I00, PID2008-146050NA-I00, PID2023-148367OB-I00, PID2023-146050NA-I00, TED2021-130470B-I00 and TED2021-129999B-C32), the ‘Comunidad de Madrid’, European Structural Funds (S2018/NMT-4367), and the proyectos sinérgicos I + D (Y2020/NMT6469). L. M. thanks the Ministerio de Ciencia e Innovación for a Ramón y Cajal contract (RYC2021-031590-I). I. M. thanks CAM for his fellowship (PIPF-2023/ECO-30898). This research project was made possible through the access granted by the Galician Supercomputing Center (CESGA) to its supercomputing infrastructure. The supercomputer FinisTerrae III and its permanent data storage system have been funded by the Spanish Ministry of Science and Innovation, the Galician Government and the European Regional Development Fund (ERDF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Analysis of twinning mechanisms of Mg–RE alloys using in situ synchrotron radiation diffraction and high-resolution digital image correlation

  • Garcés, Gerardo
  • Orozco-Caballero, A.
  • Medina, Judit
  • Pérez Zubiaur, Pablo
  • Stark, Andreas
  • Schell, Norbert
  • Adeva, Paloma
In situ synchrotron diffraction combined with high-resolution digital image correlation (HRDIC) were used to analyse the activation and spatial propagation of different twinning modes during compression deformation in an extruded Mg-6%Gd(wt%) alloy. Gadolinium atoms are in solid solution in the as-extruded state. Initially, the deformation process is controlled by the activation of tensile {101̅2}< 101̅1 > twinning (TTW). The volume fraction of TTWs evolves rapidly due to the twins transfer throughout neighbour grains and basal slip-assisted twin nucleation, as evidenced by HRDIC from the early development of localized deformation bands. TTW mode induces the rotation of the lattice with respect to the initial magnesium orientation and, therefore, a progressive increase in the intensity of the {0002} diffraction peak with increasing the strain in the axial direction, that reaches a maximum at around 6% of compression strain that also coincides with the maximum of the work-hardening curve. Above this strain, the compression (CTW) and double twinning (DTW) modes are also activated. This fact reduces the {0002} intensity along AD and increases the intensity of the {0002} diffraction peak in a direction between 15º to 45º from axial direction. The activation of non-basal dislocation-mediated slip modes within twins relaxes the localized stress concentration that DTWs generate. Therefore, gadolinium in solid solution enhances compressive plasticity in Mg alloys through the cooperative interaction between twinning and non-basal dislocation slip., This work was financially supported by the Spanish Ministry of Science, Innovation and Universities under project number TED2021–131235B-I00. The authors acknowledge the Deutsches Elektronen-Synchrotron (DESY) for providing beamtime at the P07 beamline of the PETRA III synchrotron facility. We would like to acknowledge support of the Electron Microscopy Laboratory at National Center for Metallurgical Research (CSIC) and National Center of Electron Microscopy (UCM) for access to their facilities and expert assistance. We acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project S2018/NMT−4291 TEC2SPACE), MINECO (project CSIC13–4E−1794) and EU (FEDER, FSE).
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Contribución de congreso (ConferenceOutput)

Autonomous vehicle control in CARLA Challenge

  • Egido Sierra, Javier del
  • Díaz Díaz, Alejandro
  • Bergasa Pascual, Luis M.
  • Barea Navarro, Rafael
  • López Guillén, M. Elena
Trabajo presentado en: R-Evolucionando el transporte, XIV Congreso de Ingeniería del Transporte (CIT 2021), realizado en modalidad online los días 6, 7 y 8 de julio de 2021, organizado por la Universidad de Burgos, The introduction of Autonomous Vehicles (AVs) in a realistic urban environment is an ambitious objective. AV validation on real scenarios involving actual objects such as cars or pedestrians in a wide range of traffic cases would escalate the cost and could generate hazardous situations. Consequently, autonomous driving simulators are quickly evolving to cover the gap to achieve a fully autonomous driving architecture validation. Most used 3D simulators in self-driving cars field are V-REP (Rohmer, E., 2013) and Gazebo (KOENIG, N. and HOWARD, A., 2004), due to an easy integration with ROS (QUIGLEY, 2009) platform to increase the interoperability with other systems. Those simulators provide accurate motion information (more appropriate for easier scenes like robotic arms) but not a realistic appearance and not allowing real-time systems, not being able to recreate complex traffic scenes. CARLA (DOSOVITSKIY, A., 2017) opensource AV simulator is designed to be able to train and validate control and perception algorithms in complex traffic scenarios with hyper-realistic environments. CARLA simulator allows to easily modify on-board sensors such as cameras or LiDAR, weather conditions and also the traffic scene to perform specific traffic cases. In Summer 2019, CARLA launched its driving challenge to allow everyone to test their own control techniques under the same traffic scenarios, scoring its performance regarding traffic rules. In this paper, the Robesafe researching group approach will be explained, detailing vehicle motion control and object detection adapted from Smart Elderly Car (GÓMEZ-HUÉLAMO, C., 2019) that lead the group to reach the 4th place in Track 3 challenge, where HD Map, Waypoints and environmental sensors data (LiDAR, RGB cameras and GPS) were provided., This work has been funded in part from the Spanish MICINN/FEDER through the Techs4AgeCar project (RTI2018-099263-B-C21) and from the RoboCity2030-DIH-CM project (P2018/NMT- 4331), funded by Programas de actividades I+D (CAM) and cofunded by EU Structural Funds.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Half-hedgehog spin textures in sub-100 nm soft magnetic nanodots

  • Berganza, E.
  • Jaafar, M.
  • Fernandez-Roldan, J.A.
  • Goiriena-Goikoetxea, M.
  • Pablo-Navarro, J.
  • Garcia-Arribas, A.
  • Guslienko, K.
  • Magen, C.
  • De Teresa, J.M.
  • Chubykalo-Fesenko, O.
  • Asenjo, A.
Topologically non-trivial structures such as magnetic skyrmions are nanometric spin textures of outstanding potential for spintronic applications due to their unique features. It is well known that Neel skyrmions of definite chirality are stabilized by the Dzyaloshinskii-Moriya exchange interaction (DMI) in bulk non-centrosymmetric materials or ultrathin films with strong spin-orbit coupling at the interface. In this work, we show that soft magnetic (permalloy) hemispherical nanodots are able to host three-dimensional chiral structures (half-hedgehog spin textures) with non-zero tropological charge. They are observed at room temperature, in absence of DMI interaction and they can be further stabilized by the magnetic field arising from the Magnetic Force Microscopy probe. Micromagnetic simulations corroborate the experimental data. Our work implies the existence of a new degree of freedom to create and manipulate complex 3D spin-textures in soft magnetic nanodots and opens up future possibilities to explore their magnetization dynamics.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Docking MOF crystals on graphene support for highly selective electrocatalytic peroxide production

  • Huang, X.
  • Oleynikov, P.
  • He, H.
  • Mayoral, A.
  • Mu, L.
  • Lin, F.
  • Zhang, Y. B.
Tailoring the reaction kinetics is the central theme of designer electrocatalysts, which enables the selective conversion of abundant and inert atmospheric species into useful products. Here we show a supporting effect in tuning the electrocatalytic kinetics of oxygen reduction reaction (ORR) from four-electron to two-electron mechanism by docking metalloporphyrin-based metal-organic frameworks (MOFs) crystals on graphene support, leading to highly selective peroxide production with faradaic efficiency as high as 93.4%. A magic angle of 38.1° tilting for the co-facial alignment was uncovered by electron diffraction tomography, which is attributed to the maximization of π-π interaction for mitigating the lattice and symmetry mismatch between MOF and graphene. The facilitated electron migration and oxygen chemisorption could be ascribed to the supportive effect of graphene that disperses of the electron state of the active center, and ultimately regulates rate-determining step.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Metal-catalyst-free gas-phase synthesis of long-chain hydrocarbons

  • Martínez, L.
  • Merino, P.
  • Santoro, G.
  • Martínez, J. I.
  • Katsanoulis, S.
  • Ault, J.
  • Mayoral, A.
  • Vázquez, L.
  • Accolla, M.
  • Dazzi, A.
  • Mathurin, J.
  • Borondics, F.
  • Blázquez-Blázquez, E.
  • Shauloff, N.
  • Lebrón-Aguilar, R.
  • Quintanilla-López, J. E.
  • Jelinek, R.
  • Cernicharo, J.
  • Stone, H. A.
  • de la Peña O’Shea, V. A.
  • de Andres, P. L.
  • Haller, G.
  • Ellis, G. J.
  • Martín-Gago, J. A.
Development of sustainable processes for hydrocarbons synthesis is a fundamental challenge in chemistry since these are of unquestionable importance for the production of many essential synthetic chemicals, materials and carbon-based fuels. Current industrial processes rely on non-abundant metal catalysts, temperatures of hundreds of Celsius and pressures of tens of bars. We propose an alternative gas phase process under mild reaction conditions using only atomic carbon, molecular hydrogen and an inert carrier gas. We demonstrate that the presence of CH2 and H radicals leads to efficient C-C chain growth, producing micron-length fibres of unbranched alkanes with an average length distribution between C23-C33. Ab-initio calculations uncover a thermodynamically favourable methylene coupling process on the surface of carbonaceous nanoparticles, which is kinematically facilitated by a trap-and-release mechanism of the reactants and nanoparticles that is confirmed by a steady incompressible flow simulation. This work could lead to future alternative sustainable synthetic routes to critical alkane-based chemicals or fuels.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Optimal coupling of Ho W<sub>10 molecular magnets to superconducting circuits near spin clock transitions

  • Gimeno, Ignacio
  • Rollano, Víctor
  • Zueco, David
  • Duan, Yan
  • de Ory, Marina C.
  • Gomez, Alicia
  • Gaita-Ariño, Alejandro
  • Sánchez-Azqueta, Carlos
  • Astner, Thomas
  • Granados, Daniel
  • Hill, Stephen
  • Majer, Johannes
  • Coronado, Eugenio
  • Luis, Fernando
A central goal in quantum technologies is to maximize GT<sub>2, where G stands for the coupling of a qubit to control and readout signals and T<sub>2 is the qubit’s coherence time. This is challenging, as increasing G (e.g., by coupling the qubit more strongly to external stimuli) often leads to deleterious effects on T<sub>2. Here, we study the coupling of pure and magnetically diluted crystals of Ho W<sub>10 magnetic clusters to microwave superconducting coplanar waveguides. Absorption lines give a broadband picture of the magnetic energy level scheme and, in particular, confirm the existence of level anticrossings at equidistant magnetic fields determined by the combination of crystal field and hyperfine interactions. Such “spin clock transitions” are known to shield the electronic spins against magnetic field fluctuations. The analysis of the microwave transmission shows that the spin-photon coupling also becomes maximum at these transitions. The results show that engineering spin-clock states of molecular systems offers a promising strategy to combine sizable spin-photon interactions with a sufficient isolation from unwanted magnetic noise sources.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Study of the optimal deposition conditions of Ag(O2) and Ag(N2) seed layers on ultrathin silver transparent conductive films

  • Cueva, Ana
  • Carretero, Enrique
In this study, ultrathin Ag layers were analyzed for their use as conductive films, which were fabricated via magnetron sputtering on a glass substrate and protected with aluminum-doped zinc oxide (AZO). These layers were obtained using seed layers made of silver deposited by adding small amounts of oxygen or nitrogen prior to the deposition of the metallic silver layer. This study aimed to determine the optimal amount of gas needed to maximize the conductivity and transparency properties of the conductive films with varied silver thicknesses. The optimal characteristics of the studied samples were verified using spectrophotometric, sheet resistance measurements, and surface morphology techniques. It was concluded that a smaller amount of silver required a higher amount of gas to be introduced into the seed layer. Besides, to fabricate an optimal conductive film, it is necessary to deposit 5.9 or 5.2 nm of silver with a seed layer obtained with a O2 partial pressure of 1.7 × 10−4 mbar, or 5.2 or 4.7 nm of silver with a seed layer obtained using a N2 partial pressure of 4.2 × 10−4 mbar. These samples provide sheet resistance values between 13.0 Ω/sq and 17.6 Ω/sq and transmission between 86.2 % and 87.3 % at 550 nm.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Smart dual-functionalized gold nanoclusters for spatio-temporally controlled delivery of combined chemo- and photodynamic therapy

  • Nonell, Santi
  • Planas, Oriol
  • Gallavardin, Thibault
  • Nieves, Ingrid
  • Tabero, Andrea
  • Villanueva, Ángeles
We report the preparation of gold nanoclusters (AuNCs) as a delivery vehicle for the clinically approved photodynamic and chemotherapeutic agents Protoporphyrin IX (PpIX) and doxorubicin (DOX), respectively, and their effect on tumor cells. DOX was attached to the gold nanoclusters through a singlet oxygen-cleavable linker and was therefore released after PpIX irradiation with red light, contributing, synergistically with singlet oxygen, to induce cell death. The doubly functionalized AuNCs proved more effective than a combination of individually functionalized AuNCs. Unlike free DOX, the photoactive nanosystem was non-toxic in the absence of light, which paves the way to introduce a spatiotemporal control of the anticancer therapy and could contribute to reducing the undesirable side effects of DOX.
Docta Complutense
Publication Artículo científico (JournalArticle)

Rod–sphere cluster irradiation with femtosecond laser pulses: cut and paste at the nanoscale

  • Díaz-Núñez, Pablo
  • Thomä, Sabrina L.J.
  • González-Rubio, Guillermo
  • Borrell Grueiro, Olivia
  • Höller, Roland P.M.
  • Chanana, Munish
  • Garoz, David
  • Bañares Morcillo, Luis
  • Junquera González, María Elena
  • Guerrero Martínez, Andrés
  • Rivera, Antonio
  • Peña-Rodríguez, Ovidio
We report on the irradiation of gold rod–sphere assemblies with ultrashort laser pulses, producing structures that are very difficult to obtain by other methods. The optical response of these assemblies displays several peaks arising from the interaction of the plasmon modes of the individual particles, offering thus great flexibility to control the energy deposited on the individual particles. Judicious selection of the wavelength and fluence of the laser pulses allow fine control over the changes produced: the particles can be melted, welded and/or the organic links cleaved. In this way, it is possible to generate structures “à la carte” with a degree of control unmatched by other synthetic protocols. The method is exemplified with gold nanoparticles, but it can be easily implemented on particles composed of different metals, widening considerably the range of possibilities. The final structures are excellent candidates for surface-enhanced spectroscopies or plasmonic photothermal therapy as they have a very intense electric field located outside the structure, not in the gaps.
Docta Complutense
Research data Set de datos (Dataset)

Data: Combination of electron beam surface structuring and plasma electrolytic oxidation for advanced surface modification of Ti6Al4V alloy

  • Mora Sánchez, Hugo
  • Pixner, Florian
  • Buzolin, Ricardo
  • Mohedano Sánchez, Marta
  • Arrabal Durán, Raúl
  • Warchomicka, Fernando
  • Matykina, Endzhe
The objective of this work is to study for the first time the combination of electron beam (EB) surface structuring and plasma electrolytic oxidation (PEO) with the aim of providing a multiscale topography and bioactive surface to the Ti6Al4V alloy for biomedical applications. Ca and P-containing coatings were produced via 45 s PEO treatments over multi-scale EB surface topographies. The coatings morphology and composition were characterized by a means of scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). The effect on the previous EB topography was evaluated by means of a 3D optical profilometry and electrochemical response via potentiodynamic polarization tests. In general, the PEO process, morphology, composition and growth rate of the coatings were almost identical, irrespective of the topography treated. Minimal local differences were found in terms of morphology, and the growth rate were related to specific topographical features. Nevertheless, all the PEO-coated substrates presented essentially the same corrosion resistance. Electrochemical tests revealed a localized crevice corrosion susceptibility of all the bare EB topographies, which was successfully prevented after the PEO treatment.
Docta Complutense
Publication Artículo científico (JournalArticle)

Nanostructured gold electrodes promote neural maturation and network connectivity

  • Dominguez-Bajo, Ana
  • Rosa, Juliana M.
  • González-Mayorga, Ankor
  • Rodilla González, Beatriz Loreto
  • Arché-Nuñez, Ana
  • Benayas, Esther
  • Ocón, Pilar
  • Pérez García, Lucas
  • Camarero, Julio
  • Miranda, Rodolfo
  • González, M. Teresa
  • Aguilar, Juan
  • Lopez-Dolado, Elisa
  • Serrano, María C.
Progress in the clinical application of recording and stimulation devices for neural diseases is still limited, mainly because of suboptimal material engineering and unfavorable interactions with biological entities. Nanotechnology is providing upgraded designs of materials to better mimic the native extracellular environment and attain more intimate contacts with individual neurons, besides allowing for the miniaturization of the electrodes. However, little progress has been done to date on the understanding of the biological impact that such neural interfaces have on neural network maturation and functionality. In this work, we elucidate the effect of a gold (Au) highly ordered nanostructure on the morphological and functional interactions with neural cells and tissues. Alumina-templated Au nanostructured electrodes composed of parallel nanowires of 160 nm in diameter and 1.2 mu m in length (Au-NWs), with 320 nm of pitch, are designed and characterized. Equivalent non-structured Au electrodes (Au-Flat) are used for comparison. By using diverse techniques in in vitro cell cultures including live calcium imaging, we found that Au-NWs interfaced with primary neural cortical cells for up to 14 days allow neural networks growth and increase spontaneous activity and ability of neuronal synchronization, thus indicating that nanostructured features favor neuronal network. The enhancement in the number of glial cells found is hypothesized to be behind these beneficial functional effects. The in vivo effect of the implantation of these nanostructured electrodes and its potential relevance for future clinical applicability has been explored in an experimental model of rat spinal cord injury. Subacute responses to implanted Au-NWs show no overt reactive or toxic biological reactions besides those triggered by the injury itself. These results highlight the translational potential of Au-NWs electrodes for in vivo applications as neural interfaces in contact with central nervous tissues including the injured spinal cord.
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Integrated Mach–Zehnder interferometer based on liquid crystal evanescent field tuning

  • Caño García, Manuel|||0000-0002-4437-4296
  • Poudereux Sánchez, David
  • Gordo Quiroga, Fernando José|||0000-0003-3928-2546
  • Geday, Morten Andreas|||0000-0002-5625-1162
  • Otón Sánchez, José Manuel|||0000-0001-8070-9180
  • Quintana Arregui, Patxi Xabier|||0000-0003-4315-2701
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Effect of Solute Content and Temperature on the Deformation Mechanisms and Critical Resolved Shear Stress in Mg-Al and Mg-Zn Alloys

  • Wang, De-Yi
  • Li, Na
  • Alizadeh Balochi, Reza
  • Monclús, M. A.
  • Cui, Yuwen
  • Molina Aldareguía, Jon M.|||0000-0003-3508-6003
  • Llorca Martinez, Francisco Javier|||0000-0002-3122-7879
Archivo Digital UPM
Publication Contribución de congreso (ConferenceOutput)

Fabrication of polymer-based optical waveguides using direct laser writing techniques for biosensing in the visible spectrum

  • Gordo Quiroga, Fernando José|||0000-0003-3928-2546
  • Caño García, Manuel|||0000-0002-4437-4296
  • Geday, Morten Andreas|||0000-0002-5625-1162
  • Quintana Arregui, Patxi Xabier|||0000-0003-4315-2701
  • Otón Sánchez, José Manuel|||0000-0001-8070-9180
Archivo Digital UPM
Publication Contribución de congreso (ConferenceOutput)

Modulating transmission of waveguides with tunable cladding

  • Otón Sánchez, José Manuel|||0000-0001-8070-9180
  • Caño García, Manuel|||0000-0002-4437-4296
  • Otón Martínez, Eva
  • Geday, Morten Andreas|||0000-0002-5625-1162
  • Quintana Arregui, Patxi Xabier|||0000-0003-4315-2701
Archivo Digital UPM
Publication Contribución de congreso (ConferenceOutput)

Propagation and bend losses in low-contrast polymers for single-mode optical waveguides

  • Gordo Quiroga, Fernando José|||0000-0003-3928-2546
  • Álvarez Morales, Gonzalo
  • Hervás García, Ricardo|||0000-0001-5106-1477
  • García Hidalgo, Guillermo
  • García de Blas, Mario|||0000-0001-9382-2908
  • Paz Martínez, Luis Felipe|||0000-0001-9219-9755
  • Pereiro García, Javier|||0000-0002-2286-8279
  • Caño García, Manuel|||0000-0002-4437-4296
  • Otón Sánchez, José Manuel|||0000-0001-8070-9180
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Background-Subtraction Algorithm Optimization for Home Camera-Based Night-Vision Fall Detectors

  • Alonso, Mercedes
  • Brunete González, Alberto|||0000-0001-9873-232X
  • Hernando Gutiérrez, Miguel|||0000-0001-9997-0266
  • Gambao Galán, Ernesto|||0000-0003-1705-1800
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Liquid crystal tunable claddings for polymer integrated optical waveguides

  • Otón Sánchez, José Manuel|||0000-0001-8070-9180
  • Caño García, Manuel|||0000-0002-4437-4296
  • Gordo Quiroga, Fernando José|||0000-0003-3928-2546
  • Otón Martínez, Eva
  • Geday, Morten Andreas|||0000-0002-5625-1162
  • Quintana Arregui, Patxi Xabier|||0000-0003-4315-2701
Archivo Digital UPM
Publication Tesis doctoral (DoctoralThesis)

Experimental and theoretical study of the optical frequency combs generated by gain-switching of semiconductor lasers

Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Monitoring Crack Propagation in Skin-Stringer Elements Using Carbon Nanotube Doped Adhesive Films: Influence of Defects and Manufacturing Process

  • Fernández Sánchez-Romate, Xoan Xosé|||0000-0001-9283-4712
  • Moriche Tirado, Rocío
  • Renato Pozo, Angel
  • Jiménez Suárez, Alberto
  • Sánchez, María
  • Güemes Gordo, Jesús Alfredo|||0000-0002-6700-3455
  • Ureña, Alejandro
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Dynamic local strain in graphene generated by surface acoustic waves

  • Fandan, Rajveer Singh|||0000-0002-4885-8853
  • Pedrós Ayala, Jorge|||0000-0002-3154-0187
  • Hernández-Mínguez, Alberto
  • Iikawa, Fernando
  • Santos, Paulo V.
  • Boscá Mojena, Alberto|||0000-0001-5900-1428
  • Calle Gómez, Fernando|||0000-0001-7869-6704
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

A spectrophotometer implementation as project-based learning in Photonics Engineering

  • Esteban Martínez, Óscar
  • Vergaz Benito, Ricardo
  • Quintana Arregui, Patxi Xabier|||0000-0003-4315-2701
  • Caño García, Manuel|||0000-0002-4437-4296
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Numerical and experimental analysis of optical frequency comb generation in gain-Switched semiconductor lasers

  • Rosado Pérez, Alejandro|||0000-0002-9276-7051
  • Pérez Serrano, Antonio|||0000-0003-0642-136X
  • García Tijero, José Manuel|||0000-0002-7414-8855
  • Valle Gutiérrez, Ángel
  • Pesquera, Luis
  • Esquivias Moscardo, Ignacio|||0000-0001-7298-8271
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Thermomechanical Characterisation of W-Eurofer 97 Brazed Joints

  • Tejado Garrido, Elena María|||0000-0002-5240-6702
  • Prado Escudero, Javier de
  • Tarancón Román, Sandra|||0000-0002-2910-8707
  • Sánchez Martínez, María
  • Martín Sanz, Antonia|||0000-0003-1291-948X
  • Pastor Caño, Jose Ygnacio|||0000-0003-3561-5999
  • Ureña Fernández, Alejandro
Archivo Digital UPM
Publication Contribución de congreso (ConferenceOutput)

Performance analysis of photovoltaic systems: research at IDR/UPM Institute

  • Roibás Millán, Elena|||0000-0003-0180-6973
  • Alfonso Corcuera, Daniel|||0000-0002-1080-0840
  • Cubas Cano, Javier|||0000-0001-9787-3796
  • Álvarez Romero, José Miguel|||0000-0002-8582-8311
  • Pindado Carrion, Santiago|||0000-0003-2073-8275
  • Gómez San Juan, Alejandro Manuel|||0000-0001-9160-6937
Archivo Digital UPM
Publication Contribución de congreso (ConferenceOutput)

On the thermo-electric modelling of smallsats

  • Gómez San Juan, Alejandro Manuel|||0000-0001-9160-6937
  • Cubas Cano, Javier|||0000-0001-9787-3796
  • Pindado Carrion, Santiago|||0000-0003-2073-8275
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Dynamic Walking of a Legged Robot in Underwater Environments

  • Portilla Tuesta, Gerardo Alejandro
  • Saltaren Pazmiño, Roque Jacinto|||0000-0001-8009-5350
  • Montero de Espinosa, Francisco
  • Rodríguez Barroso, Alejandro
  • Cely Gutiérrez, Juan Sebastián|||0000-0003-3348-0533
  • Yakrangi, Oz
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Experimental and Computational Methodology for the Determination of Hydrodynamic Coefficients Based on Free Decay Test: Application to Conception and Control of Underwater Robots

  • Cely Gutiérrez, Juan Sebastián|||0000-0003-3348-0533
  • Saltaren Pazmiño, Roque Jacinto|||0000-0001-8009-5350
  • Portilla Tuesta, Gerardo Alejandro
  • Yakrangi, Oz
  • Rodríguez Barroso, Alejandro
Archivo Digital UPM
Publication Contribución de congreso (ConferenceOutput)

Broadband (1-16 GHz) Balanced MMIC GaAs pHEMT LNA for Radio Astronomy Applications

  • Jiménez Martín, José Luis|||0000-0002-1857-5369
  • González Posadas, Vicente|||0000-0002-0873-1364
  • Parra Cerrada, Ángel|||0000-0001-7626-2099
  • García Muñoz, Luis Enrique
  • Segovia Vargas, Daniel
Archivo Digital UPM
Publication Contribución de congreso (ConferenceOutput)

Liquid crystal spiral diffraction lenses

  • Otón Sánchez, José Manuel|||0000-0001-8070-9180
  • Quintana Arregui, Patxi Xabier|||0000-0003-4315-2701
  • Caño García, Manuel|||0000-0002-4437-4296
  • Geday, Morten Andreas|||0000-0002-5625-1162
Archivo Digital UPM
Publication Contribución de congreso (ConferenceOutput)

Simple electronic driver circuit for liquid crystal devices

  • Quintana Arregui, Patxi Xabier|||0000-0003-4315-2701
  • Caño García, Manuel|||0000-0002-4437-4296
  • Hervás García, Ricardo|||0000-0001-5106-1477
  • Alberca Ramírez, Juan José
  • Otón Sánchez, José Manuel|||0000-0001-8070-9180
  • Geday, Morten Andreas|||0000-0002-5625-1162
Archivo Digital UPM
Publication Contribución de congreso (ConferenceOutput)

A social robot empowered with a new programming language and its performance in a laboratory

  • Alvarado Vásquez, Biel Piero E.
  • Matia Espada, Fernando|||0000-0002-2198-1448
Archivo Digital UPM
Publication Contribución de congreso (ConferenceOutput)

Integrated Analysis and Quality Control of Laser-Based Additive Manufacturing Processes

  • Ocaña Moreno, José Luis|||0000-0001-9263-8404
  • Cordovilla Baró, Francisco|||0000-0001-7438-2804
  • García Beltrán, Ángel|||0000-0003-1900-0222
  • Vicente Oliva, Jesús de
  • Porro González, Juan Antonio|||0000-0001-5260-527X
  • Díaz Muñoz, Marcos|||0000-0001-7751-4913
  • Tapia Fernández, Santiago|||0000-0002-1418-9276
  • Angulo Ramonell, Ignacio
  • Díaz, J.
  • Álvarez, P.
  • Montealegre, M. A.
  • Garzón, M.
  • Muñoz, D. A.
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

W-Cu Metal Matrix Composites for Next Generation Fusion Devices

Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Beneficial Effects of a WC Addition in FAST-Densified Tungsten

  • Novak, Sasa
  • Kocen, Matej
  • Sestan Zavasnik, Andreja
  • Galatanu, Andrei
  • Galatanu, Magdalena
  • Tarancón Román, Sandra|||0000-0002-2910-8707
  • Tejado Garrido, Elena María|||0000-0002-5240-6702
  • Pastor Caño, Jose Ygnacio|||0000-0003-3561-5999
  • Jenus, Petra
Archivo Digital UPM
Publication Contribución de congreso (ConferenceOutput)

Influence of pressure history on jet dynamics in LIFT processes: simulation and experimental analysis

  • Moreno Labella, Juan José|||0000-0003-2612-707X
  • Morales Furió, Miguel|||0000-0001-7425-9742
  • Muñoz Martín, David|||0000-0001-5837-6367
  • Márquez Fernández, Andrés
  • Molpeceres Álvarez, Carlos Luis|||0000-0002-6236-8359
Archivo Digital UPM
Publication Contribución de congreso (ConferenceOutput)

Evaluation of the Tensile and Elastic Properties of W/Cu Coatings for its Application to the FGM DEMO Divertor Concept

  • Tarancón Román, Sandra|||0000-0002-2910-8707
  • Tejado Garrido, Elena María|||0000-0002-5240-6702
  • Richou, Marianne
  • Pastor Caño, Jose Ygnacio|||0000-0003-3561-5999
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Simple solar panels/battery modeling for spacecraft power distribution systems

  • Porras Hermoso, Ángel Luis|||0000-0002-3576-0603
  • Cobo López, Borja
  • Cubas Cano, Javier|||0000-0001-9787-3796
  • Pindado Carrion, Santiago|||0000-0003-2073-8275
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Processing of WC/W Composites for Extreme Environments by Colloidal Dispersion of Powders and SPS Sintering

  • García Ayala, Esperanza Macarena
  • Tarancón Román, Sandra|||0000-0002-2910-8707
  • González Granados, Zoilo
  • Ferrari Fernández, Begoña
  • Pastor Caño, Jose Ygnacio|||0000-0003-3561-5999
  • Sánchez Herencia, Antonio Javier
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Robotic Fertilisation Using Localisation Systems Based on Point Clouds in Strip-Cropping Fields

  • Cruz Ulloa, Christyan|||0000-0003-2824-6611
  • Krus, Anne|||0000-0003-3606-4826
  • Barrientos Cruz, Antonio|||0000-0003-1691-3907
  • Cerro Giner, Jaime Del|||0000-0003-4893-2571
  • Valero Ubierna, Constantino|||0000-0003-4473-3209
Archivo Digital UPM
Publication Contribución de congreso (ConferenceOutput)

El satélite universitario UPM-SAT2

  • Pindado Carrion, Santiago|||0000-0003-2073-8275
  • Roibás Millán, Elena|||0000-0003-0180-6973
  • Pérez Álvarez, Javier|||0000-0002-5267-9970
  • Cubas Cano, Javier|||0000-0001-9787-3796
  • Álvarez Romero, José Miguel|||0000-0002-8582-8311
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Li-ion battery for space missions based on COTS cells: Mechanical analysis and design

  • Zaragoza Asensio, Juan Antonio
  • Pindado Carrion, Santiago|||0000-0003-2073-8275
  • Pérez Álvarez, Javier|||0000-0002-5267-9970
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Analytical modeling of current-voltage photovoltaic performance: an easy approach to solar panel behavior

  • Álvarez Romero, José Miguel|||0000-0002-8582-8311
  • Alfonso Corcuera, Daniel|||0000-0002-1080-0840
  • Roibás Millán, Elena|||0000-0003-0180-6973
  • Cubas Cano, Javier|||0000-0001-9787-3796
  • Cubero Estalrrich, Juan L.
  • González Estrada, Alejandro
  • Jado Puente, Rocio
  • Sanabria Pinzón, Marlon
  • Pindado Carrion, Santiago|||0000-0003-2073-8275
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Two-Dimensional Digital Beam Steering Based on Liquid Crystal Phase Gratings

  • García de Blas, Mario|||0000-0001-9382-2908
  • Geday, Morten Andreas|||0000-0002-5625-1162
  • Otón Sánchez, José Manuel|||0000-0001-8070-9180
  • Quintana Arregui, Patxi Xabier|||0000-0003-4315-2701
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Low-Cost Three-Dimensional Modeling of Crop Plants

  • Martínez Guanter, Jorge
  • Ribeiro Seijas, Ángela Mª|||0000-0001-5807-8132
  • Peteinatos, Gerassimos
  • Pérez Ruiz, Manuel
  • Gerhards, Roland
  • Bengochea Guevara, José María
  • Machleb, Jannis
  • Andújar Sánchez, Dionisio
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Video-oculography eye tracking towards clinical applications: a review

  • Larrazábal, Agostina Juliana
  • García Cena, Cecilia Elisabet|||0000-0002-1067-0564
  • Martínez, César Ernesto
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

On the thermo-electrical modeling of small satellite's solar panels

  • Gómez San Juan, Alejandro Manuel|||0000-0001-9160-6937
  • Cubas Cano, Javier|||0000-0001-9787-3796
  • Pindado Carrion, Santiago|||0000-0003-2073-8275
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Long-Term Behavior of the Micro-Texture of Aggregates Used on Roads Subjected to Extreme Climate Conditions and Winter Maintenance Operations

  • Pérez Fortes, Ana Patricia|||0000-0003-0068-7722
  • Varas Muriel, María Josefa
  • Castiñeiras, Pedro
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

On the performance of solar cells/panels and Li-ion batteries: simplified models developed at the IDR/UPM Institute

  • Pindado Carrion, Santiago|||0000-0003-2073-8275
  • Álvarez Romero, José Miguel|||0000-0002-8582-8311
  • Roibás Millán, Elena|||0000-0003-0180-6973
  • Alfonso Corcuera, Daniel|||0000-0002-1080-0840
  • Cubas Cano, Javier|||0000-0001-9787-3796
  • Gómez San Juan, Alejandro Manuel|||0000-0001-9160-6937
Archivo Digital UPM
Publication Contribución de congreso (ConferenceOutput)

Small satellite design at the UPM Master in Space Systems (MUSE)

  • Pindado Carrion, Santiago|||0000-0003-2073-8275
  • Cubas Cano, Javier|||0000-0001-9787-3796
  • Roibás Millán, Elena|||0000-0003-0180-6973
  • Pérez Álvarez, Javier|||0000-0002-5267-9970
  • Sanz Andres, Angel Pedro|||0000-0001-5890-6065
  • Franchini Longhi, Sebastian Nicolas|||0000-0002-1476-9174
  • Pérez Grande, María Isabel|||0000-0002-7145-2835
  • Alonso Rodrigo, Gustavo|||0000-0002-1220-5586
  • García Pérez, Andrés|||0000-0003-1444-9725
  • Chimeno Manguan, Marcos|||0000-0002-8290-8746
  • Torralbo Gimeno, Ignacio|||0000-0001-9272-6439
  • Zamorano Flores, Juan Rafael|||0000-0001-5412-5691
  • Alonso Muñoz, Alejandro Antonio|||0000-0002-1622-8996
Archivo Digital UPM
Publication Contribución de congreso (ConferenceOutput)

UPMSat-2 Micro-satellite: In-orbit technological demonstration for education and science

  • Roibás Millán, Elena|||0000-0003-0180-6973
  • Pérez Álvarez, Javier|||0000-0002-5267-9970
  • Pindado Carrion, Santiago|||0000-0003-2073-8275
  • Cubas Cano, Javier|||0000-0001-9787-3796
  • Sanz Andres, Angel Pedro|||0000-0001-5890-6065
  • Franchini Longhi, Sebastian Nicolas|||0000-0002-1476-9174
  • Pérez Grande, María Isabel|||0000-0002-7145-2835
  • Alonso Rodrigo, Gustavo|||0000-0002-1220-5586
  • García Pérez, Andrés|||0000-0003-1444-9725
  • Chimeno Manguan, Marcos|||0000-0002-8290-8746
  • Torralbo Gimeno, Ignacio|||0000-0001-9272-6439
  • Zamorano Flores, Juan Rafael|||0000-0002-6006-4335
  • Puente Alfaro, Juan Antonio de la|||0000-0002-7673-9835
  • Garrido Balaguer, Jorge|||0000-0002-8385-2721
  • Alonso Muñoz, Alejandro Antonio|||0000-0002-1622-8996
  • Gómez San Juan, Alejandro Manuel|||0000-0001-9160-6937
  • Piqueras Carreño, Javier|||0000-0002-3787-9640
  • Peinado Pérez, Lilian|||0000-0002-4711-6110
  • González Llana, Arturo
  • Álvarez Romero, José Miguel|||0000-0002-8582-8311
  • Bermejo Ballesteros, Juan|||0000-0002-5583-6097
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

On the UPMSat-2 attitude determination and control subsystem's magnetometers integration

  • Rodríguez Rojo, Elena|||0000-0002-7193-4041
  • Cubas Cano, Javier|||0000-0001-9787-3796
  • Pindado Carrion, Santiago|||0000-0003-2073-8275
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

On the satellite attitude determination using simple environmental models and sensor data

  • Porras Hermoso, Ángel Luis|||0000-0002-3576-0603
  • Cubas Cano, Javier|||0000-0001-9787-3796
  • Pindado Carrion, Santiago|||0000-0003-2073-8275
Archivo Digital UPM
Publication Tesis doctoral (DoctoralThesis)

Aqueous colloidal processing of W and WC-based composites, sintering and mechanical properties at high temperature

Archivo Digital UPM
Publication Tesis doctoral (DoctoralThesis)

Parametrization and simulation of blister-actuated laser-induced forward transfer (BA-LIFT) and LIFT for high-viscosity pastes

  • Moreno Labella, Juan José|||0000-0003-2612-707X
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Coverage analysis of remote sensing satellites in concurrent design facility

  • Marín Coca, Sergio|||0000-0003-0737-0613
  • Roibás Millán, Elena|||0000-0003-0180-6973
  • Pindado Carrion, Santiago|||0000-0003-2073-8275
Archivo Digital UPM
Publication Otros (Other)

PIRAMIDE: Proyectos de Investigación Realizados por estudiantes de Máster/grado para la Innovación y el Desarrollo Espacial. Informe Final

  • Roibás Millán, Elena|||0000-0003-0180-6973
  • Pindado Carrion, Santiago|||0000-0003-2073-8275
Archivo Digital UPM
Publication Contribución de congreso (ConferenceOutput)

Analysis of results from PIRAMIDE educational innovation project (English edition)

  • Soria Carro, Ana
  • Roibás Millán, Elena|||0000-0003-0180-6973
  • Pérez Álvarez, Javier|||0000-0002-5267-9970
  • Cubas Cano, Javier|||0000-0001-9787-3796
  • Zamorano Flores, Juan Rafael|||0000-0002-6006-4335
  • Álvarez Romero, José Miguel|||0000-0002-8582-8311
  • Alfonso Corcuera, Daniel|||0000-0002-1080-0840
  • Pindado Carrion, Santiago|||0000-0003-2073-8275
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

TASEC-Lab: A COTS-based CubeSat-like university experiment for characterizing the convective heat transfer in stratospheric balloon missions

  • González Bárcena, David|||0000-0002-9563-860X
  • Peinado Pérez, Lilian|||0000-0002-4711-6110
  • Fernández Soler, Alejandro José|||0000-0001-5662-9092
  • Pérez Muñoz, Ángel Grover|||0009-0007-0760-6071
  • Álvarez Romero, José Miguel|||0000-0002-8582-8311
  • Ayape, Fernando
  • Martín, Jonathan
  • Bermejo Ballesteros, Juan|||0000-0002-5583-6097
  • Porras Hermoso, Ángel Luis|||0000-0002-3576-0603
  • Alfonso Corcuera, Daniel|||0000-0002-1080-0840
  • Marín Coca, Sergio|||0000-0003-0737-0613
  • Soto Aranaz, Manú
  • Boado Cuartero, María Blanca|||0000-0003-0264-2587
  • García Romero, Rafael
  • Pindado Carrion, Santiago|||0000-0003-2073-8275
  • Pérez Álvarez, Javier|||0000-0002-5267-9970
  • Zamorano Flores, Juan Rafael|||0000-0001-5412-5691
  • Torralbo Gimeno, Ignacio|||0000-0001-9272-6439
  • Sanz Andres, Angel Pedro|||0000-0001-5890-6065
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

The UPMQube: an Academic/Educational PocketQube Proposal for the EU2Space Challenge

  • Roibás Millán, Elena|||0000-0003-0180-6973
  • Álvarez Romero, José Miguel|||0000-0002-8582-8311
  • Marín Coca, Sergio|||0000-0003-0737-0613
  • Porras Hermoso, Ángel Luis|||0000-0002-3576-0603
  • Pérez Álvarez, Javier|||0000-0002-5267-9970
  • Cubas Cano, Javier|||0000-0001-9787-3796
  • Pindado Carrion, Santiago|||0000-0003-2073-8275
Archivo Digital UPM
Publication Contribución de congreso (ConferenceOutput)

Design and calibration process of solar sensors for small satellite missions

  • Porras Hermoso, Ángel Luis|||0000-0002-3576-0603
  • Alfonso Corcuera, Daniel|||0000-0002-1080-0840
  • Piqueras Carreño, Javier|||0000-0002-3787-9640
  • Roibás Millán, Elena|||0000-0003-0180-6973
  • Cubas Cano, Javier|||0000-0001-9787-3796
  • Pérez Álvarez, Javier|||0000-0002-5267-9970
  • Pindado Carrion, Santiago|||0000-0003-2073-8275