Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 347
Encontrada(s) 4 página(s)

DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Mining for Perchlorate Resistance Genes in Microorganisms From Sediments of a Hypersaline Pond in Atacama Desert, Chile

  • Díaz Rullo, J.
  • Rodríguez Valdecantos, G.
  • Torres Rojas, F.
  • Cid, L.
  • Vargas, I. T.
  • González, B.
  • González Pastor, J. E.
The Supplementary Material for this article can be found online at: https://www.frontiersin.org/articles/10.3389/fmicb.2021.723874/full#supplementary-material, Perchlorate is an oxidative pollutant toxic to most of terrestrial life by promoting denaturation of macromolecules, oxidative stress, and DNA damage. However, several microorganisms, especially hyperhalophiles, are able to tolerate high levels of this compound. Furthermore, relatively high quantities of perchlorate salts were detected on the Martian surface, and due to its strong hygroscopicity and its ability to substantially decrease the freezing point of water, perchlorate is thought to increase the availability of liquid brine water in hyper-arid and cold environments, such as the Martian regolith. Therefore, perchlorate has been proposed as a compound worth studying to better understanding the habitability of the Martian surface. In the present work, to study the molecular mechanisms of perchlorate resistance, a functional metagenomic approach was used, and for that, a small-insert library was constructed with DNA isolated from microorganisms exposed to perchlorate in sediments of a hypersaline pond in the Atacama Desert, Chile (Salar de Maricunga), one of the regions with the highest levels of perchlorate on Earth. The metagenomic library was hosted in Escherichia coli DH10B strain and exposed to sodium perchlorate. This technique allowed the identification of nine perchlorate-resistant clones and their environmental DNA fragments were sequenced. A total of seventeen ORFs were predicted, individually cloned, and nine of them increased perchlorate resistance when expressed in E. coli DH10B cells. These genes encoded hypothetical conserved proteins of unknown functions and proteins similar to other not previously reported to be involved in perchlorate resistance that were related to different cellular processes such as RNA processing, tRNA modification, DNA protection and repair, metabolism, and protein degradation. Furthermore, these genes also conferred resistance to UV-radiation, 4-nitroquinoline-N-oxide (4-NQO) and/or hydrogen peroxide (H2O2), other stress conditions that induce oxidative stress, and damage in proteins and nucleic acids. Therefore, the novel genes identified will help us to better understand the molecular strategies of microorganisms to survive in the presence of perchlorate and may be used in Mars exploration for creating perchlorate-resistance strains interesting for developing Bioregenerative Life Support Systems (BLSS) based on in situ resource utilization (ISRU)., We thank Carolina González de Figueras from the Centro de Astrobiología (Spain) for technical assistance. This research was supported by: (i) the Spanish Ministry of Science, Innovation and Universities (MICINN) PGC2018-096956-B-C42 which also included European Regional Development Fund (FEDER) and FPU18/03583 grant, (ii) the European Commission, Horizon 2020 Framework Programme, Call: H2020-LEIT-BIO-2015-1, Project: METAFLUIDICS, GA 685474, and (iii) the National Agency for Research and Development of Chile (ANID), PIA/BASAL FB0002. JD-R was supported by a FPI fellowship from the Universidad de Alcalá and by a FPU fellowship from the Spanish Ministry of Science, Innovation and Universities (MICINN) FPU 18/03583. Open access publication fee has been funded by Instituto Nacional de Técnica Aeroespacial (INTA)., Peerreview
Docta Complutense
Publicación Artículo científico (JournalArticle)

A new fluorescent probe for the visualization of progerin

  • Macicior Michelena, Jon
  • Fernández, Daniel
  • Ortega Gutiérrez, Silvia
Hutchinson-Gilford progeria syndrome (HGPS) or progeria is a rare genetic disease that causes premature aging, leading to a drastic reduction in the life expectancy of patients. Progeria is mainly caused by the intracellular accumulation of a defective protein called progerin, generated from a mutation in the LMNA gene. Currently, there is only one approved drug for the treatment of progeria, which has limited efficacy. It is believed that progerin levels are the most important biomarker related to the severity of the disease. However, there is a lack of effective tools to directly visualize progerin in the native cellular models, since the commercially available antibodies are not well suited for the direct visualization of progerin in cells from the mouse model of the disease. In this context, an alternative option for the visualization of a protein relies on the use of fluorescent chemical probes, molecules with affinity and specificity towards a protein. In this work we report the synthesis and characterization of a new fluorescent probe (UCM-23079) that allows for the direct visualization of progerin in cells from the most widely used progeroid mouse model. Thus, UCM-23079 is a new tool compound that could help prioritize potential preclinical therapies towards the final goal of finding a definitive cure for progeria.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The influence of aridity on plant intraspecific chemical diversity supports adaptive differentiation and convergent evolution

  • Castells, Eva|||0000-0001-7423-2742
  • Sanchez-Martinez, Pablo|||0000-0002-0157-7800
Plants synthesize a broad array of specialized chemical compounds that mediate their interactions with the surrounding environment. Some of this chemical diversity is functional and subject to natural selection, but the factors underlying chemical evolution at the intraspecific level remain largely unknown. Here, we combined chemical, environmental and genetic data to investigate the effect of aridity on the expression of chemotypes in the invasive shrub Senecio pterophorus. We studied the variation in pyrrolizidine alkaloids (PAs), a group of specialized metabolites widespread across the families Boraginaceae, Asteraceae and Fabaceae, from native populations spanning a cline of aridity and from three cross-continental introductions, under natural and common garden conditions. We examined whether the relationship between chemistry and aridity was compatible with a process of adaptive differentiation using a method that partitions the variance and covariance by controlling for the population neutral genetic structure. We found a consistent shift from retrorsine-like to seneciphylline-like compounds under increasing aridity in both natural and controlled conditions in coherence with the biosynthetic pathways. This pattern was independent of the neutral genetic structure and occurred along the environmental gradient in the native range and in a convergent manner in all nonnative regions, which suggests adaptive differentiation in response to aridity. Our findings show that the diversity of PAs in S. pterophorus has been partially shaped by aridity. Investigating how abiotic factors influence chemical evolution is key to elucidating the plant responses in future climate scenarios and the cascading effects on other trophic levels.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The introduction of a highly virulent PRRSV strain in pig farms is associated with a change in the pattern of influenza A virus infection in nurseries

  • Domingo Carreño, Ivan|||0009-0001-9927-9069
  • Serena, Maria Soledad
  • Martin-Valls, Gerard|||0000-0003-3302-0692
  • Clilverd, Hepzibar|||0000-0002-4309-7506
  • Aguirre Molins, Laia|||0000-0003-3257-3965
  • Cortey, Martí|||0000-0003-1126-3423
  • Mateu de Antonio, Enrique María|||0000-0003-2715-6032
The present study aimed to determine the dynamics of influenza A virus (IAV) infection in two endemically infected farms (F1 and F2), where a longitudinal follow-up of piglets was performed from birth to 8-12 weeks of age. During the study, a highly virulent isolate of porcine reproductive and respiratory syndrome virus (PRRSV) was introduced on both farms. This allowed us to examine the impact of such introduction on the patterns of infection, disease, and the antibody response of pigs to IAV infection. The introduction of the new PRRSV strain coincided with a change in the dynamics of IAV infection on both farms. In F1, the cumulative incidence of IAV increased from 20% before the outbreak to 67.5%, together with the existence of animals that tested positive for IAV (RT‒qPCR) in nasal swabs for two or more consecutive samples. In F2, the cumulative incidence of IAV increased from 50% before the PRRSV outbreak to 70%, and the proportion of prolonged IAV shedders increased sharply. Additionally, some animals were infected with the same IAV twice during the observation period. In contrast to previous reports, our study revealed that prolonged shedding was not related to the titres of maternally derived antibodies at the time of infection but was significantly (p < 0.05) related to PRRSV infection status. Notably, both before and after the PRRSV outbreak, a high proportion of IAV-infected piglets did not seroconvert, which was significantly (p < 0.05) related to the hemagglutination inhibition titres against IAV when infected.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Selection of viral variants with enhanced transmission and reduced neutralization susceptibility alongside lateral introductions may explain the persistence of porcine reproductive and respiratory syndrome virus in vaccinated breeding herds

  • Clilverd, Hepzibar|||0000-0002-4309-7506
  • Li, Yanli
  • Martin-Valls, Gerard|||0000-0003-3302-0692
  • Aguirre Molins, Laia|||0000-0003-3257-3965
  • Martín Castillo, Margarita|||0000-0003-4370-6700
  • Cortey, Martí|||0000-0003-1126-3423
  • Mateu de Antonio, Enrique María|||0000-0003-2715-6032
This study investigates the long-term evolutionary dynamics of porcine reproductive and respiratory syndrome virus (PRRSV-1) in an endemically infected and vaccinated pig herd. Over a one year and a half period, piglets from seven farrowing batches in a 300-sow PRRSV-vaccinated farm were monitored from birth to nine weeks of age by reverse transcription-quantitative polymerase chain reaction (RT-qPCR). Eighty-five PRRSV-positive samples were subjected to whole genome sequencing (Illumina Miseq), and 251 samples to open reading frame 5 (ORF5) sequencing. Farm-specific PRRSV variants' impact on anti-PRRSV antibodies was evaluated using enzyme-linked immunosorbent and neutralizing antibody assays. The replication kinetics and cytokine inhibition capabilities (IFN-α and TNF-α) of these variants were assessed in porcine alveolar macrophages. The study revealed fluctuating PRRSV-1 incidences in farrowing units and nurseries, attributed to two key evolutionary events: an escape variant emergence and a lateral introduction of a new strain. Initially, strain 1 variant α was swiftly replaced within weeks by variant 1β (99.5 per cent genomic similarity), with twenty-five amino acid mutations, primarily in nsp1α, GP2, GP3, and GP5, including an additional glycosylation site and a deletion downstream the neutralization epitope of GP5. This shift to 1β correlated with increased incidence in nurseries and higher viral loads, with sera from 1α-exposed animals showing reduced neutralization against 1β. Consistently for in vitro assays, variant 1β demonstrated enhanced replication in porcine alveolar macrophages but no difference regarding IFN-α or TNF-α responses. Later, a new strain (strain 2, 83.3 per cent similarity to strain 1) emerged and led to incidence resurgence because of the low cross reactivity with the previous antibodies. The study highlights PRRSV's rapid adaptability and challenges in controlling its spread, underscoring the necessity for more effective vaccines and eradication approaches.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Effect of Longer Pre-Starter Diet Allowance on Post-Weaning Performance of Lightweight Piglets

  • González Solé, Francesc|||0000-0002-3469-6240
  • Solà Oriol, David|||0000-0001-8365-340X
  • Villagómez Estrada, Sandra|||0000-0003-3086-3256
  • Muns, Ramon|||0000-0002-8139-8668
  • Pérez Hernández, José Francisco|||0000-0001-8853-8945
This study evaluated the effects of providing weaning pigs with a pre-starter diet until they reach a target body weight (7.9 kg) before transitioning to a more affordable diet, compared to offering it until a fixed day (10 days post-weaning). Pigs were categorized as medium or small based on their weaning body weight. The results demonstrated that extending the pre-starter diet until a target body weight was achieved did not affect overall growth nor body weight variability but did reduce mortality in small pigs between days 10 and 36. Given that this study was conducted without zinc oxide and with lower protein levels than previous studies, the findings highlight the need to reassess nutritional strategies for improving small pigs' growth and reducing body weight variability. Future research should explore the potential impact of setting a target body weight in the allowance of a starter diet, as well as assess its long-term effects. First-phase diets are formulated to help pigs reach a target body weight before switching to a more affordable diet. However, these transitions typically take place on a fixed schedule, which may disadvantage low-body-weight piglets due to their underdeveloped digestive systems and limited feed intake capacity. This study examined the effects of offering low-body-weight (BW) pigs a pre-starter diet until they reached a target BW on growth performance and BW variability. A total of 528 pigs ([Landrace × Yorkshire] × Pietrain), weaned at day 21, representing the smallest 50% of their batch, were divided into medium (5.35 ± 0.31 kg) and small (3.97 ± 0.21 kg) groups based on weaning BW. Pigs received a pre-starter diet either for 10 days (FIXED) or until they reached a target BW of 7.9 kg (TBW), followed by a starter feed. Growth performance between the TBW and fixed strategies was similar over the 36-day period. Overall, mortality was higher in small pigs, though small pigs fed using the fixed strategy showed higher mortality than the rest of the groups between days 10 and 36. This study concludes that offering a pre-starter diet based on target BW, instead of a fixed time, did not significantly improve growth performance or batch uniformity but reduced mortality in small pigs from days 10 to 36.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Short-term polystyrene nanoplastic exposure alters zebrafish male and female germline and reproductive outcomes, unveiling pollutant-impacted molecular pathways

  • Pujol Infantes, Gala|||0000-0002-3915-4766
  • Marin Gual, Laia|||0000-0003-1480-0976
  • González Rodelas, Laura|||0000-0002-3780-5748
  • Álvarez-González, Lucía|||0000-0001-8154-8614
  • Chauvigné, François|||0000-0001-5571-7517
  • Cerdà, Joan|||0000-0003-2568-6398
  • Teles, Mariana|||0000-0001-5525-4049
  • Roher Armentia, Nerea|||0000-0002-6659-4038
  • Ruiz-Herrera, Aurora|||0000-0003-3868-6151
Nanoplastics pollution is a rising environmental concern whose impacts on biodiversity and human health are far from being understood. This is particularly salient in aquatic ecosystems, where the majority of species depend on external fertilization for reproduction. Here we evaluated the effects of a short-term exposure to engineered polystyrene nanoplastics (NPs) in the zebrafish germline to further explore their impact on reproduction. To this end, zebrafish (Danio rerio) were exposed to 5 mg/L of 45 nm polystyrene (PS)-NPs via water for 96 h. We show that, in males, nanoplastics induced testicular histological alterations with abnormal sperm clustering and chromatin compaction, resulting in viable spermatozoa but with reduced motility. Moreover, in females we observed an alteration in oocyte stages frequencies during oogenesis, possibly reflecting alterations in oocyte growth. RNA-sequencing analysis in male testis links nanoplastic induced alterations in the expression of genes involved in chromatin structure, meiosis and DNA double-strand break formation and repair progression, and gametes recognition. Flow cytometry analysis revealed that the observed effects in males were directly due to nanoplastics penetrating the testicular barrier and being internalized within germline cells. Overall, our results demonstrate that acute exposure to NPs can compromise reproductive fitness, underscoring the environmental and health impacts of NPs pollution.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Increased hydraulic risk in assemblages of woody plant species predicts spatial patterns of drought-induced mortality

  • Sanchez-Martinez, Pablo|||0000-0002-0157-7800
  • Mencuccini, Maurizio|||0000-0003-0840-1477
  • García-Valdés, Raúl|||0000-0001-6399-4709
  • Hammond, William M.
  • Serra Díaz, Josep M|||0000-0003-1988-1154
  • Guo, Wen-Yong|||0000-0002-4737-2042
  • Segovia, Ricardo A.|||0000-0002-8787-619X
  • Dexter, Kyle G|||0000-0001-9232-5221
  • Svenning, Jens-Christian|||0000-0002-3415-0862
  • Allen, Craig|||0000-0002-8777-5989
  • Martínez Vilalta, Jordi|||0000-0002-2332-7298
Predicting drought-induced mortality (DIM) of woody plants remains a key research challenge under climate change. Here, we integrate information on the edaphoclimatic niches, phylogeny and hydraulic traits of species to model the hydraulic risk of woody plants globally. We combine these models with species distribution records to estimate the hydraulic risk faced by local woody plant species assemblages. Thus, we produce global maps of hydraulic risk and test for its relationship with observed DIM. Our results show that local assemblages modelled as having higher hydraulic risk present a higher probability of DIM. Metrics characterizing this hydraulic risk improve DIM predictions globally, relative to models accounting only for edaphoclimatic predictors or broad functional groupings. The methodology we present here allows mapping of functional trait distributions and elucidation of global macro-evolutionary and biogeographical patterns, improving our ability to predict potential global change impacts on vegetation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Effect of mixing at weaning and nutrient density of the weaner diet on growth performance and welfare of pigs to slaughter

  • González Solé, Francesc|||0000-0002-3469-6240
  • Solà Oriol, David|||0000-0001-8365-340X
  • Pérez Hernández, José Francisco|||0000-0001-8853-8945
  • Lawlor, Peader G.
  • Boyle, Laura A.
  • Garcia Manzanilla, E.
  • Camp Montoro, Jordi|||0000-0002-0547-0752
Background: Mixing pigs at weaning can compromise pig welfare and growth. Therefore, grouping littermates together may allow a diet nutrient and energy density reduction during the nursery period to reduce feed cost without affecting slaughter weight. This study investigated the combined effect of mixing and reducing dietary energy and nutrient density on growth performance, body lesions (BL), and behaviour in pigs from weaning to slaughter. Results: Forty-eight litters [554 pigs, 11-12 pigs/litter; Danish Duroc × (Large White × Landrace)] were included in the trial. At 28 days of age, pigs were weaned and housed in nursery rooms in litter groups (INTACT, n = 24) or mixed with other litters and grouped by weight to reduce within-pen pig weight variation (MIXED, n = 24). A dietary regimen meeting pigs' nutritional requirements (CON) and a low-density dietary regimen (LOW; -10% energy and protein) completed a 2 × 2 factorial arrangement (Mixing x Diet, n = 12). On day 74 of age, pigs moved to the grower-finisher accommodation without further mixing and all pigs received the CON dietary regimen. Mixing increased FCR by 4.0% during the nursery period (p = 0.003). Nursery pigs fed LOW experienced a growth retardation which was maintained until slaughter (-2.6 kg slaughter weight; p = 0.025). Initial differences in the coefficient of variation (CV) between MIXED (10.4%) and INTACT (17.6%; p < 0.001) pigs were reduced in CON pens but not in LOW pens (interaction p = 0.025) at the end of the nursery period. MIXED pigs had more fights and BL (p < 0.001) at weaning and showed more aggression (p = 0.003) after being moved to the grower-finisher rooms. At the end of the nursery period, MIXED pigs fed LOW showed the highest number of aggressive behaviours around the feeder (interaction; p = 0.003) and pigs fed LOW showed more damaging behaviour (p < 0.001). Conclusions: Mixing animals at weaning had limited impact on growth performance but impaired welfare which was aggravated by energy and nutrient reduction in the nursery diet. Decreasing dietary nutrient density in the nursery stage retarded growth, which could not be compensated for during the growing-finishing period.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

LGBT Climate Inventory in Corporations for Straight People?, ¿Un inventario del clima LGBT en las empresas para personas heterosexuales?

  • Freude, Leon|||0000-0003-2284-9817
  • Bonet Martí, Jordi|||0000-0002-8863-3202
Open societies are eager to accommodate sexual and gender diversity at work. The Lesbian, Gay, Bisexuals and Trans Climate Inventory (LGBTCI) is an instrument measuring organizational climate towards sexual and gender diversity, relying on the opinion of LGTB people. We argue that non-LGTB employees also perceive a climate towards sexual and gender diversity, and therefore include them to measure LGBT-friendly climate at work. By means of a Multiple Correspondence Analysis (MCA) we validate this application of the LGBTCI obtaining two factors: first, comprehension of the items linked to sexual and gender diversity; second, positioning with respect to the climate. We contribute to existing research claiming that non-LGBT employees should be incorporated in the measurement of the climate., Las sociedades abiertas se caracterizan por su deseo de acoger la diversidad sexual y de género en los lugares de trabajo. En este sentido, el Inventario de Clima para Lesbianas, Gays, Bisexuales y Trans (LGBTCI) es un instrumento que mide el clima organizacional hacia la diversidad sexual y de género, basándose en la opinión de las personas LGTB. En este artículo, argumentamos que los empleados no LGTB también pueden percibir el clima hacia la diversidad sexual y de género y, por lo tanto, los hemos incluido para medir el clima favorable a las personas LGTB en el trabajo. Mediante un Análisis de Correspondencias Múltiples (ACM) hemos validado esta aplicación del LGBTCI obteniendo dos factores: la comprensión de los ítems vinculados a la diversidad sexual y de género, y el posicionamiento respecto al clima. Este artículo supone una contribución a las investigaciones previas que consideraban que los empleados no LGBT no deberían ser incorporados a la medición del clima organizacional en las empresas.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Unveiling the Evolutionary History of European Vipers and Their Venoms From a Multi-Omic Approach

  • Talavera, Adrián|||0000-0002-4007-0965
  • Palmada-Flores, Marc|||0000-0003-0246-5226
  • Martínez-Freiría, Fernando|||0000-0003-2311-8960
  • Mochales-Riaño, Gabriel|||0000-0002-9130-2308
  • Burriel Carranza, Bernat|||0000-0001-9832-1782
  • Estarellas, Maria|||0000-0001-7360-6458
  • Fernández-Guiberteau, Daniel
  • Camina, Álvaro
  • Ursenbacher, Sylvain|||0000-0001-5093-6403
  • Vörös, Judit|||0000-0001-9707-1443
  • Halpern, Bálint|||0000-0003-0934-6246
  • Pla, Davinia|||0000-0002-9810-7556
  • Calvete, Juan José|||0000-0001-5026-3122
  • Mikheyev, Alexander S.|||0000-0003-4369-1019
  • Marquès i Bonet, Tomàs|||0000-0002-5597-3075
  • Carranza, Salvador|||0000-0002-5378-3008
Snake genomes attract significant attention from multiple disciplines, including medicine, drug bioprospection, and evolutionary biology. However, genomic research within the Viperidae family has mostly focused on the subfamily Crotalinae, while the true vipers (Viperinae) have largely been overlooked. European vipers (Vipera) have been the subject of extensive research due to their phylogeographic and ecological diversification, as well as their venoms. Nevertheless, phylogeography and systematics in this genus have primarily relied on biased information from mitochondrial genes, which fail to capture the likely effects of introgression and are prone to biases. On the other hand, venom research in this group has been conducted predominantly through proteomics alone. In this study, we generated chromosome-level genome assemblies for three Vipera species and whole-genome sequencing data for 94 samples representing 15 Vipera lineages. This comprehensive dataset allowed us to disentangle the phylogenomic relationships of this genus, affected by mito-nuclear discordance and pervaded by ancestral introgression. Population-level analyses in the Iberian Peninsula, where the three oldest lineages within Vipera meet, revealed signals of recent adaptive introgression between old-diverged and ecologically dissimilar species, whereas chromosomal rearrangements isolate species occupying similar niches. Finally, using transcriptomic and proteomic data, we characterised the Vipera toxin-encoding genes, in which opposing selective forces were unveiled as common drivers of the evolution of venom as an integrated phenotype.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A Targeted Nanotoxin Inhibits Colorectal Cancer Growth Through Local Tumor Pyroptosis and Eosinophil Infiltration and Degranulation

  • Carrasco-Díaz, Luis Miguel|||0000-0003-0567-2802
  • Gallardo, Alberto|||0000-0002-2514-2027
  • Voltà-Durán, Eric|||0000-0003-0017-8274
  • Virgili Manrique, Anna Cristina|||0000-0001-9733-6034
  • Paez, David|||0000-0002-5596-6588
  • Villaverde, Antonio|||0000-0002-2615-4521
  • Vázquez, Esther|||0000-0003-1052-0424
  • Álamo, Patricia|||0000-0003-0510-5701
  • Unzueta Elorza, Ugutz|||0000-0001-5119-2266
  • Casanova Rigat, Isolda|||0000-0002-1196-4724
  • Mangues, Ranib
  • Alba Castellón, Lorena|||0000-0003-3449-7820
Background: Colorectal cancer (CRC) has traditionally been treated with genotoxic chemotherapy to activate pro-apoptotic proteins to induce anticancer effects. However, cancer cells develop resistance to apoptosis, which leads to recurrence and poor prognosis. Moreover, this kind of therapy has been shown to be highly toxic to healthy tissues and, therefore, to patients. To overcome this issue, we developed a self-assembly tumor-targeted nanoparticle, T22-DITOX-H6, that incorporates the T22 peptide (a CXCR4 ligand) to selectively target cells overexpressing CXCR4, fused to the catalytic domain of diphtheria toxin, that exhibits a potent cytotoxic effect on these CXCR4+ cancer cells that exhibits potent cytotoxic effects on CXCR4-overexpressing cancer cells through the activation of pyroptosis, an immunogenic type of cell death. Methods: Colorectal CXCR4-expressing tumor cells (CT26-CXCR4+) were implanted subcutaneously into immunocompetent mice to study the effects of T22-DITOX-H6 treatment on tumor growth, cell death and innate immune cell recruitment to the tumor. Results: Here, we demonstrated that the T22-DITOX-H6 nanoparticle selectively activated pyroptosis, an immunogenic cell death that differs from apoptosis, leading to cell death in CXCR4-expressing cells, without affecting the viability of CXCR4-lacking cells. In addition, the nanoparticle administered to tumor-bearing mice induced a local antitumor effect due to the selective activation of pyroptosis in CXCR4+ targeted cancer cells. Biochemical analysis of plasma and histological analysis of non-tumor tissues revealed no differences between the groups. Remarkably, pyroptosis activation stimulates eosinophil infiltration into the tumor microenvironment, an effect recently reported to have an anti-tumorigenic function. Conclusion: These results highlight the dual role of CXCR4-targeted cytotoxic nanoparticle in eliminating cancer cells and boosting the self-immune response without compromising healthy organs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Climatic niche conservatism in non-native plants is largely dependent on their climatic niche breadth in the native range

  • Riera, Marc|||0000-0002-3860-6046
  • Vilà, Montserrat|||0000-0003-3171-8261
  • Melero, Yolanda|||0000-0002-4337-1448
  • Sáez, Llorenç|||0000-0003-4551-2432
  • Pino i Vilalta, Joan|||0000-0003-0939-7502
Confidence in predictions of non-native species' spread relies on the niche conservatism hypothesis, which poses that climatic niches are preserved over time and space. Because plants introduced through the same introduction pathway (gardening, unintentional) tend to share some features of the introduction process and biological attributes, the extent of niche conservatism might be influenced by how and when species of particular attributes have been introduced. We compared the realized climatic niches between the native (global) and invaded ranges (mainland Spain), through ordination and kernel smoothers. We calculated niche conservatism metrics (i.e. overlap, unfilling, stability, expansion and pioneering), for a set of 158 plant species. Niche conservatism metrics were then related to a plant's introduction pathway, minimum residence time, growth form and native climatic niche breadth. On average, niche stability accounted for 75% of niche occupancy, while around 61% of species showed some degree of niche shift, which were mostly of small magnitude. The climatic niche was most conserved for annual and perennial herbs, plants introduced a long time ago, and those with broad climatic niches in their native range. Introduction pathways had a non-significant effect. Niche conservatism metrics were neither explained by interactions of minimum residence time with introduction pathways nor with growth form. Native climatic niche breadth was the most important correlate of niche conservatism metrics. Synthesis. Non-native plants largely occupy similar climatic conditions in their invaded and native range, a pattern that co-occurred with frequent and mostly small niche shifts. These results largely support the niche conservatism hypothesis. This boosts confidence in predictive models of non-native plants' spread. This study highlights that niche conservatism is better explained by a plant's ability to cope with broad climatic conditions, rather than by its introduction history or growth form.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A single recall vaccination lapse in sows triggers PRRSV resurgence and boosts viral genetic diversity

  • Clilverd, Hepzibar|||0000-0002-4309-7506
  • Martin-Valls, Gerard|||0000-0003-3302-0692
  • Li, Yanli
  • Domingo Carreño, Ivan|||0009-0001-9927-9069
  • Martín Castillo, Margarita|||0000-0003-4370-6700
  • Cortey, Martí|||0000-0003-1126-3423
  • Mateu de Antonio, Enrique María|||0000-0003-2715-6032
Porcine reproductive and respiratory syndrome virus (PRRSV) persists on certain farms despite vaccination and control efforts, with genetic diversity suspected as a contributing factor. This study examined the evolution and persistence dynamics of PRRSV-1 on a farrow-to-fattening farm with 1,700 sows vaccinated quarterly, focusing on a summer vaccination lapse. Over eight months, three farrowing batches were monitored from birth to nine weeks of age using virological (RT-qPCR, whole-genome, and ORF5 sequencing) and serological (ELISA and neutralizing antibody) analyses. An incident related to elevated temperatures during the summer involving unproper vaccine handling occurred during the last blanket vaccination, before sampling the third batch. Viral circulation was primarily confined to the nurseries, with a notable surge of incidence and mortality in this last batch, linked to lower maternal antibody levels likely due to vaccination failure. Phylogenetic analyses showed the persistence of the same viral strain throughout the study, with increased genetic diversity in Batch 3 driven by selection and recombination. Ultimately, reestablishing the vaccination program led to a PRRSV-positive-stable with vaccination status. Overall, a single vaccination lapse caused increased PRRSV-1 incidence and genetic diversity in weaners, linked to declining maternal antibody levels, underscoring the importance of strict vaccination adherence. The online version contains supplementary material available at 10.1186/s40813-025-00433-w.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Male meiosis at the helm, shaping genomes and sex chromosomes in emerging vertebrate models

  • Marin Gual, Laia|||0000-0003-1480-0976
  • Waters, Paul D.|||0000-0002-4689-8747
  • Ruiz-Herrera, Aurora|||0000-0003-3868-6151
The generation of haploid gametes is a hallmark of sexual reproduction achieved through a complex, albeit tightly regulated, reductional cell division known as meiosis. While the molecular underpinnings of meiosis have been extensively characterized in eutherian mammalian models, key aspects-particularly those governing chromosome synapsis and recombination-remain poorly understood in non-eutherian mammals and non-model vertebrates. This knowledge gap is especially relevant for understanding genome evolution, with a focus on sex chromosomes. Comparative studies across diverse vertebrate lineages are therefore essential to uncover conserved and lineage-specific features of meiotic regulation. In this review, we explore the evolutionary dynamics of meiosis in vertebrates, emphasizing how the meiotic program influences genome architecture and the evolution of heteromorphic sex chromosomes, especially the Y chromosome. As research in non-model species gains momentum, dissecting the diversity of meiotic mechanisms across taxa emerges as a key to understanding genome plasticity and evolutionary innovation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Meiotic cohesin RAD21L shapes 3D genome structure and transcription in the male germline

  • Marin Gual, Laia|||0000-0003-1480-0976
  • Vara González, Covadonga|||0000-0002-8264-9262
  • Sainz-Urruela, Raquel
  • Cuartero, Yasmina
  • Álvarez-González, Lucía|||0000-0001-8154-8614
  • Felipe-Medina, Natalia
  • García, Francisca|||0000-0002-2141-7628
  • Llano, Elena
  • Marti-Renom, Marc A.|||0000-0002-0151-4279
  • Pendás, Alberto M.
  • Ruiz-Herrera, Aurora|||0000-0003-3868-6151
The distinctive three-dimensional (3D) chromatin architecture adopted by chromosomes during meiosis is essential for fertility, yet the functional implications of the fine-scale spatial organization remain poorly understood. Here, we investigate the impact of RAD21L deletion, a meiosis-specific cohesin subunit, on the 3D genome architecture and gene expression in the male germ line. Using fluorescence-activated cell sorting, high-throughput chromosome conformation capture, and single-cell RNA sequencing, we demonstrate that RAD21L deficiency impairs meiotic chromatin organization and inter/intrachromosomal interactions. This conspicuous 3D genome reorganization also disrupts bouquet formation, resulting in increased telomeric interactions between heterologous chromosomes in primary spermatocytes. Genome reorganization was accompanied by detectable transcriptional dysregulation in spermatogonia and primary spermatocytes, mainly affecting sex chromosomes. Collectively, our findings establish the cohesin RAD21L as a germline-specific critical regulator of genome-wide 3D genome reorganization during spermatogenesis and a modulator of the male germline transcriptional landscape.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

KDEL-mediated modulation of intracellular trafficking in cell-targeted protein drugs

  • Voltà-Durán, Eric|||0000-0003-0017-8274
  • Alba Castellón, Lorena|||0000-0003-3449-7820
  • Arena, Lourdes Ailen|||0009-0006-1863-3895
  • Sánchez, Julieta M.|||0000-0001-6676-5776
  • Casanova Rigat, Isolda|||0000-0002-1196-4724
  • Mangues, Ramon|||0000-0003-2661-9525
  • Villaverde, Antonio|||0000-0002-2615-4521
  • Vázquez, Esther|||0000-0003-1052-0424
  • Unzueta Elorza, Ugutz|||0000-0001-5119-2266
The biological activity of therapeutic proteins, upon intracellular delivery, is dramatically minimized by lysosomal proteolytic digestion. This is a limitation when developing cell-targeted pharmaceuticals that penetrate target cells via receptor recognition and endosomal engulfment. Since proteins benefit from functional and conformational versatility, editable by genetic engineering, endosomolytic protein domains are often fused to the functional polypeptide to promote their cytosolic delivery, aiming at minimizing proteolysis in mature lysosomes. This straightforward strategy has, however, rendered irregular results, linked to the fusogenic nature of most of the tested domains. Alternatively, proteolysis of protein drugs might be controlled by bypassing the lysosomal route, forcing an unconventional traffic of the uptaken protein material to be secreted from the endoplasmic reticulum (ER). This possibility, used in nature by several plant and microbial proteins, has been evaluated here by functionalizing a protein-only antitumoral drug, based on a cell-targeted diphtheria toxin, with a C-terminal KDEL motif. Thus, if KDEL were able to reprogram the intracellular trafficking, KDEL-tagged cell delivered proteins would be expected to avoid the lysosomal degradation, resulting in enhanced stability and activity. The obtained results validate this hypothesis and point out KDEL as a promising functional agent in cell-targeted protein drugs.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Insider information and its relation with the arbitrage condition and the utility maximization problem

  • D'Auria, Bernardo
  • Salmerón Garrido, José Antonio
Correction: Mathematical Biosciences and Engineering, 20(5), 8305-8307. https://doi.org/10.3934/mbe.2023362 We prove that Theorem 4.16 in [1] is false by constructing a strategy that generates (FLVR) H(G). However, we success to prove that the no arbitrage property still holds when the agent only plays with strategies belonging to the admissible set called buy-and-hold., Within the well-known framework of financial portfolio optimization, we analyze the existing relationships between the condition of arbitrage and the utility maximization in presence of insider information. We assume that, since the initial time, the information flow is altered by adding the knowledge of an additional random variable including future information. In this context we study the utility maximization problem under the logarithmic and the Constant Relative Risk Aversion (CRRA) utilities, with and without the restriction of no temporary-bankruptcy.In particular, we show that the value of the insider information may be bounded while the arbitrage condition holds and we prove that the insider information does not always imply arbitrage for the insider by providing an explicit example., This research was partially supported by the Spanish Ministry of Economy and Competitiveness grants MTM2017-85618-P (via FEDER funds), MTM2015-72907-EXP and FPU18/01101. We thank the referees for the insightful comments that helped to improve the presentation of this work.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Predicting MHC I restricted T cell epitopes in mice with NAP-CNB, a novel online tool

  • Wert Carvajal, Carlos
  • Sánchez García, Rubén
  • Macías, José R.
  • Sanz Pamplona, Rebeca
  • Méndez Pérez, Almudena
  • Alemany, Ramon
  • Veiga, Esteban
  • Sánchez Sorzano, Carlos Óscar
  • Muñoz Barrutia, María Arrate
Lack of a dedicated integrated pipeline for neoantigen discovery in mice hinders cancer immunotherapy research. Novel sequential approaches through recurrent neural networks can improve the accuracy of T-cell epitope binding affinity predictions in mice, and a simplified variant selection process can reduce operational requirements. We have developed a web server tool (NAPCNB) for a full and automatic pipeline based on recurrent neural networks, to predict putative neoantigens from tumoral RNA sequencing reads. The developed software can estimate H-2 peptide ligands, with an AUC comparable or superior to state-of-the-art methods, directly from tumor samples. As a proof-of-concept, we used the B16 melanoma model to test the system’s predictive capabilities, and we report its putative neoantigens. NAP-CNB web server is freely available at http:// bioco mp. cnb. csic. es/ Neoan tigen sApp/ with scripts and datasets accessible through the download section., This work was funded by the Spanish Ministry of Economy, Industry and Competitiveness (TEC2016-28052-R, RTC2017-6600-1, SAF2017-84091-R, BFERO2020.04), the Spanish Ministry of Science and Innovation (FPU18/03199, PID2019-109820RB-I00), the “la Caixa” Foundation (LCF/BQ/EU19/11710071), FERO foundation and Centro Superior de Investigaciones Científicas (JAEINT18/EX/0636).
Repositorio Digital de la UPF
Publicación Artículo científico (JournalArticle)

“The Unbearable green demon”: a critical analysis of press representation around the extermination of monk parakeets in Madrid

  • Fernández, Laura
  • Moreno, Jose A.
  • Suárez Domínguez, Alejandro
We examine the press representation of monk parakeets (Myiopsitta monachus) and their population management in Madrid city. To do this, we analyze mentions of this species in six Spanish newspapers for the case of Madrid. We apply a mixed methodology composed of framing, text analysis, and sentiment analysis. This multi-method approach allows us to further examine the framing and word choice of the newspapers, concluding that the press representation of monk parakeets has been biased and non-ethically led. We discuss this outcome by proposing a media representation guided by non-speciesist ethical framings and avoiding the objectification of nonhuman animals., This research was funded by Spanish Ministry of Science, Innovation and Universities, grant number FPU18/04207 and the Generalitat de Catalunya (Department of Universities and Research) and the European Social Fund, grant number 2018FI_B_00094.
Repositorio Digital de la UPF
Publicación Artículo científico (JournalArticle)

Representación en la prensa española del papel de la agricultura animal en la crisis climática: falta de visibilidad y carnismo, Representation in the Spanish press of the role of animal agriculture in the climate crisis: between lack of attention and carnism

  • Moreno, Jose A.
  • Almiron, Núria, 1967-
La agricultura animal es una actividad con un gran impacto medioambiental, incluida la emisión de gases de efecto invernadero a la atmósfera, y que implica un grave dilema ético por la explotación de decenas de miles de millones de animales no humanos. Los medios de comunicación son una pieza clave para impulsar la acción climática. Es responsabilidad de los medios informar sobre las causas de la crisis climática y cómo enfrentarla. Esta investigación analiza la representación que hace la prensa española entre 2013 y 2019 del impacto climático de la agricultura animal. Para ello se ha utilizado una metodología cuantitativa basada en la teoría del framing, con encuadres construidos a partir de investigaciones anteriores. Los resultados muestran que la prensa española ha infrarrepresentado el papel de la agricultura animal en el cambio climático, no otorgándole suficiente visibilidad, que buena parte de las soluciones que los periódicos aportan no se ajusta al contexto de emergencia climática y que estas presentan con más frecuencia rasgos carnistas que encuadres en defensa de los animales no humanos, todo lo cual supone un freno a la acción ético-climática., The animal agriculture industry has extensive environmental impacts, releasing greenhouse gas emissions while also constituting a serious ethical dilemma due to the exploitation of billions of nonhuman animals. In this respect, media are a key piece for climatic action. It is a responsibility of media to report on the causes of the climate crisis and on its solutions. This research analyses the Spanish press coverage of the climatic impacts caused by the animal agriculture during the period of 2013-2019. To do so, a quantitative methodology based on framing theory has been applied, including frames developed through the examination of previous research. The results of this study show that the Spanish press has underrepresented the role that animal agriculture plays in climate change – not allocating enough attention to it –, that many of the proposed solutions do not correspond with the current context of climatic urgency, and that they present carnist traits more frequently than frames in defence of nonhuman animals. All this involves hindering future ethical and climatic action., Esta investigación se origina en el proyecto final del Máster Universitario en International Studies on Media, Power and Difference (Universitat Pompeu Fabra) y ha recibido financiación de la Fundación Franz Weber para el fomento de los Estudios Críticos sobre Animales y Medios de Comunicación, así como del programa de Formación del Profesorado Universitario del Ministerio de Ciencia, Innovación y Universidades (FPU18/04207)
Repositorio Digital de la UPF
Publicación Artículo científico (JournalArticle)

The role of the press in reproducing the climate action contrarian framings of European think tanks

  • Moreno Cabezudo, Jose Antonio
Data de publicació electrònica: 25-11-2024, This article lies in the field of research on communication and obstructionism towards climate action. The research addresses the role of the press in reproducing framings hostile to climate action when quoting some European think tanks the literature has identified as disseminators of climate obstructionist messages. The methodology is based on content and framing analysis, covering all European newspapers that have mentioned the five selected think tanks. The analysis comprises the study of 1516 texts extracted from 203 European newspapers listed on the Factiva platform. The results show that most of the press coverage about these organizations reproduced their frames against climate action, although this reproductive coverage decreased over time. Among these frames, those with political content predominated over those with climate science content. In particular, frames attacking the climate movement and questioning policies for being harmful or ineffective overshadowed scientific questioning. The research also includes a gender component in the analysis of the authorship of the texts, which shows that texts by male authors were slightly more likely to reproduce climate obstructionism than those by female authors. Ultimately, this study contributes to the discussion on the role of journalism in amplifying climate action contrarian discourse., This work was funded by the Spanish State Research Agency (Agencia Estatal de Investigación, AEI) and the European Regional Development Fund (ERDF) under Grant CSO2016-78421-R; and by the Spanish Ministry of Universities, under Grant FPU18/04207.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A contemporary approach to the graphic representation of the urban experience, Una aproximación contemporánea a la representación gráfica de la experiencia urbana

  • Vicente Gilabert, Cristina
  • López Sánchez, Marina
  • Linares Gómez del Pulgar, Mercedes
[EN] In the complex field of urban phenomenon analysis and representation, this text addresses the evolution of works specifically dedicated to investigating the relationships established between individuals and the city. It focuses its attention on one of the less studied aspects: the cartographic representation of subjective, emotional, and perceptual aspects related to the experience of navigating and inhabiting an urban space. The city cannot be considered as a neutral or objective space; on the contrary, there will always be an imaginary construct that shapes and accompanies it. This imaginary construct, which determines our way of perceiving, being, and moving within the city, is fundamental for a comprehensive understanding of urban processes and dynamics. Approaching this dialectical relationship between the physical and subjective dimensions of the city, which is intangible in itself, through analysis and graphic representation is now possible thanks to theoretical and, above all, technological advancements. The objective of this text is to contextualize this process by presenting two frames of reference: one conceptual, linked to the evolution of the term landscape, and another methodological, focused on presenting the technical advancements that have been decisive in the evolution of this type of representation. We take a journey through cartographic experiences initiated in the 1960s and arrive at some of the most innovative research lines in this field, such as Biomapping, real-time cartographies, or intelligent cartographies. The aim of the article is to reinforce and emphasize the utility of graphic expression as a tool for urban and territorial decision-making, highlighting its capacity to represent even the most sensitive and complex data. Through a panoramic view of the advancements achieved in recent decades regarding these types of cartographies, it illustrates the interesting convergence that can be delineated today between the traditionally connected areas of graphic expression in Architecture and Urbanism and the new scenarios of data management and analysis., [ES] En el complejo ámbito del análisis y la representación del fenómeno urbano, este texto aborda la evolución de aquellos trabajos que se ocupan específicamente de indagar en las relaciones que se establecen entre los individuos y la ciudad, centrando su atención en una de las líneas menos estudiadas: la representación cartográfica de los aspectos subjetivos, emocionales y perceptivos, ligados a la experiencia de recorrer y habitar un espacio urbano. La ciudad no puede considerarse como un espacio inocuo u objetivo, sino que, al contrario, siempre habrá un imaginario que la construye y acompaña. Este imaginario, que determina nuestra forma de percibirla, de estar y de movernos por ella, es fundamental para la comprensión integral de los procesos y las dinámicas urbanas. Y aproximarnos desde el análisis y la representación gráfica a esa relación dialéctica entre dimensión física y subjetiva de la ciudad, intangible en sí misma, es hoy posible gracias a los progresos teóricos y, sobre todo, tecnológicos. El objetivo de este texto es contextualizar este proceso presentando dos marcos de referencia: uno conceptual, ligado a la evolución del término de paisaje, y otro metodológico, centrado en presentar los avances técnicos que han resultado determinantes en la evolución de este tipo de representación. Se realiza un recorrido a través de experiencias cartográficas iniciadas en los años 60 hasta llegar a algunas de las líneas de investigación más innovadoras en este ámbito, como son el Biomapping, las cartografías en tiempo real o las cartografías inteligentes. El objetivo del artículo es reforzar y reivindicar la utilidad de la expresión gráfica como instrumento al servicio de la toma de decisiones urbanas y territoriales, poniendo de manifiesto su capacidad para la representación incluso de los datos más sensibles y complejos. A través de una visiónpanorámica de los avances logrados de las últimas décadas respecto a este tipo de cartografías, se ilustra el interesante espacio de convergencia que es posible delinear hoy entre los ámbitos tradicionalmente ligados con la expresión gráfica en Arquitectura y Urbanismo, y los nuevos escenarios de gestión y análisis de datos., Esta publicación es parte del proyecto de I+D+i PID2020-119437RB-I00, financiada por MCIN/AEI/10.13039/501100011033. La primera autora, por la ayuda FPU18/04853 financiada por MCIN/AEI/10.13039/501100011033 y por FSE Invierte en tu futuro.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of a novel concept of 2-stroke rod-less opposed pistons engine (2S-ROPE): Testing, modelling, and forward potential

  • Serrano, J.R.|||0000-0003-0692-3917
  • Arnau Martínez, Francisco José|||0000-0003-2902-0630
  • Bares-Moreno, Pau|||0000-0001-9672-0819
  • Gómez-Vilanova, Alejandro|||0000-0002-6627-7075
  • Garrido-Requena, J.
  • Luna-Blanca, M. J.
  • Contreras-Anguita, F. J.
[EN] As pollutants and fuel consumption requirements become more constraining, new internal combustion engines generation arise to fulfill future automobile market regulations. In these context spark ignition (SI) engines working under hybridized structures are expected to represent one of the most viable and feasible technical approaches. In parallel to the already implemented 4-stroke turbocharged engines, new engine concepts are being conceived from their birth to meet nowadays standards. This work shows a new engine concept assessed to fit series hybrid configurations from the earliest design stages, and to fulfil requirements of the named "zero-emissions" urban areas. In this research work, a new opposed piston 2-stroke engine architecture based on rodless innovative kinematics is described. The potential of this engine is based on its compactness, absence of vibrations and simplicity, going in hand with very competitive figures in terms of power density and fuel consumption. The engine unit has been designed, assembled, and tested to analyze several performance aspects, such as gas exchange and combustion. Taking advantage of the experimental campaign, a one-dimensional (1D) gas-dynamics engine model was developed and validated. Finally, the engine model was used for analyzing several potential upgrades and results have been discussed in detail. The target has always been to improve fuel consumption figures, below the best standards in market available internal combustion engines, while keeping engine concept simplicity and building costs., Alejandro Gomez Vilanova is partially supported through contract: Ayuda de Formacion de Profesorado Universitario (FPU18/04811). The authors also wish to thank Agencia IDEA (Agencia de Innovacion y Desarrollo de Andalucia) which depends on Consejeria de Economia, Conocimiento, Empresas y Universidad through PROGRAMA DE APOYO A LA I + D + i EMPRESARIAL (code 402C1700011) and subsidy in a non-competitive competition regime for companies for industrial development, improvement of competitiveness, digital transformation and job creation in Andalucia (401N1800210).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

LES of a pressurized sooting aero-engine model burner using a computationally efficient discrete sectional method coupled to tabulated

  • García-Oliver, José M|||0000-0002-2676-9681
  • Pastor Enguídanos, José Manuel|||0000-0003-4458-0353
  • Olmeda-Ramiro, Iván
  • Kalbhor, A.
  • Mira Martínez, Daniel
  • Van-Oijen, Jeroen
[EN] This work is focused on the modeling and analysis of soot formation and oxidation in the pressurized ethylene-based model burner investigated at DLR. This burner features a dual swirler configuration for the primary air supply and includes secondary dilution jets inside the combustion chamber, showing reacting flow characteristics representative of the RQL combustor technology. Large-eddy simulations (LES) of the DLR burner are conduced here to assess a coupling approach between flamelet generated manifold (FGM) chemistry and discrete sectional method (DSM) based soot model with clustering method. First, a validation of the numerical results is conducted for the gas velocity and temperature fields, and good agreement is obtained for both mean and fluctuating quantities. The Soot Volume Fraction (SVF) computed from LES shows a satisfactory agreement with the experimental data in both SVF distribution and magnitude. The analysis also includes a numerical investigation of the soot production and the Particle Size Distributions (PSD). Finally, the configuration without secondary air is evaluated and an accurate prediction of the SVF field is also obtained. In this case, the absence of dilution air strongly influences the central region of the combustion chamber, and soot distribution and PSD are mainly affected by transport and dilution, not oxidation. It is finally concluded the proposed modeling framework is capable of predicting the soot field and particle size distributions inside the combustor for both operating conditions., The research leading to these results has received funding from the European Union's Horizon 2020 Programme under the ESTiMatE project, grant agreement No. 821418, and the AHEAD PID2020-118387RB-C33 and SAFLOW TED2021-131618B-C21 and TED2021-131618B-C22 projects from the Ministerio de Ciencia e Innovacion, Spain. We acknowledge PRACE for awarding us access through the SootAero project to HAWK at GCS@HLRS, Germany. The authors thankfully acknowledge the computer resources at LaPalma and MareNos-trum, and the technical support provided by Instituto de Astrofisica de Canarias (IM-2021-2-0027) and Barcelona Supercomputing Center (IM-2021-3-0016) . I. Olmeda acknowledges the Ayuda de Formacion de Profesorado Universitario (FPU 18/03065) from the Subprograma de Estatal de Formacion del Ministerio de Ciencia, Innovacion y Universidades of Spain. DM acknowledges the grant Ayudas para contratos Ramon y Cajal (RYC) 2021: RYC2021-034654-I from Ministerio de Ciencia e Innovacion.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Airborne ultrasonic application on hot air-drying of pork liver. Intensification of moisture transport and impact on protein solubility

  • Sanchez-Torres, E.A.|||0000-0003-4121-2459
  • Benedito Fort, José Javier|||0000-0003-0163-4593
  • Bon Corbín, José|||0000-0002-0457-9705
  • Garcia-Perez, J.V.|||0000-0002-9993-4246
  • Abril-Gisbert, Blanca
  • Toldrà, M.
  • Parés, D.
[EN] Nowadays, there is increasing interest in developing strategies for the efficient and sustainable use of animal byproducts, such as pork liver. In order to stabilize the product, a prior dehydration stage may be required due to its high perishability. The water removal process of pork liver is energy costly and time consuming, which justifies its intensification using novel technologies. In this sense, the aim of this study was to assess the effect of the airborne application of power ultrasound on the hot air-drying of pork liver. For that purpose, drying experiments were carried out at 30, 40, 50, 60 and 70 ?C on pork liver cylinders at 2 m.s(-1) with (US) and without ultrasonic application (AIR). The drying process was modeled from the diffusion theory and, in the dried pork liver, the protein solubility was analyzed in order to determine the effect of drying on the protein quality. The ultrasound application increased the drying rate, shortening the drying time by up to 40% at 30 ?C. The effect of power ultrasound at high temperatures (60 and 70 ?C) was of lesser magnitude. Drying at 70 ?C involved a noticeable reduction in the protein solubility for dried liver, while the impact of ultrasound application on the solubility was not significant (p > 0.05)., The authors acknowledge the financial support from the "Ministerio de Economia y Competitividad (MINECO)" and "Instituto Nacional de Investigacion y Tecnologia Agraria y Alimentaria (INIA)" in Spain (Project RTA2017-00024-C04-03) . Eduardo A. Sanchez-Torres acknowledges the FPU PhD contract (FPU18/01439) granted by the Spanish Ministry of Science, Innovation and Universities. Funding for open access charge: Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Probabilistic risk assessment of historic timber flooring systems subjected to fire

  • Garcia-Castillo, Ester
  • Gernay, Thomas
  • Paya-Zaforteza, Ignacio
[EN] Structural fire analyses of historic buildings face significant uncertainties due to their age and the scarcity of specific fire safety guidelines in modern codes. Typical prescriptive approaches often result in interventions that compromise the aesthetic and cultural value of these structures. In contrast, probabilistic performance-based approaches address uncertainties and offer flexibility to achieve compliance with fire safety requirements while preserving built heritage. This study introduces a novel probabilistic methodology to assess the fire resistance of timber structures, demonstrated on historic timber jack arch flooring systems. Extensive numerical simulations were conducted to develop fire fragility functions and obtain reliability indices, incorporating variability in timber density, mechanical properties, strength reduction with temperature, and applied loads. Results indicate that many of the historic systems studied possess adequate fire safety. Applicable to any timber structure, this methodology allows case-specific analyses, promoting the rational conservation and design of heritage and contemporary timber systems., This article is part of the Project PID2021-128152NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe". The authors would also like to express their gratitude for the support provided to this research through the predoctoral grant FPU18/00726 funded by MICIU/AEI/10.13039/501100011033 and by "ESF Investing in your future".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Study of the Flexural Behavior of Fiber-Reinforced Concretes Exposed to Moderate Temperatures

  • Caballero-Jorna, Marta
  • Roig-Flores, Marta
  • Serna Ros, Pedro|||0000-0001-8754-1165
[EN] The use of synthetic fibers in fiber-reinforced concretes (FRCs) is often avoided due to the mistrust of lower performance at changing temperatures. This work examines the effect of moderate temperatures on the flexural strengths of FRCs. Two types of polypropylene fibers were tested, and one steel fiber was employed as a reference. Three-point bending tests were carried out following an adapted methodology based on the standard EN 14651. This adapted procedure included an insulation system that allowed the assessment of FRC flexural behavior after being exposed for two months at temperatures of 5, 20, 35 and 50 °C. In addition, the interaction of temperature with a precracked state was also analyzed. To do this, several specimens were pre-cracked to 0.5 mm after 28days and conditioned in their respective temperature until testing. The findings suggest that this range of moderate temperatures did not degrade the behavior of FRCs to a great extent since the analysis of variances showed that temperature is not always a significant factor; however, it did have an influence on the pre-cracked specimens at 35 and 50 °C., This research was funded by Spanish Ministry of Science, Innovation and Universities, grant number FPU18/06145.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A model of a rotating railway wheel for the prediction of sound radiation

  • Andrés-Ruiz, Víctor Tomás
  • Thompson, D.J.
  • Martínez Casas, José|||0000-0001-5706-4951
  • F. D. Denia|||0000-0003-4536-8610
[EN] The axial symmetry of a railway wheel is taken into account to expand its vibrational response around the circumferential direction using Fourier series. This allows the vibroacoustic problem of the wheel to be formulated in a two-dimensional frame, solving for the dynamic and acoustic variables analytically in the circumferential direction. By adopting an Eulerian approach, the inertial effects associated with the rotation of the wheelset are included in the model, assuming a constant angular speed of rotation. To represent a railway wheelset, the wheel is constrained at the inner edge of the hub and the contribution of the rigid body motion of the wheelset is superimposed on its response. The latter is evaluated analytically under the assumption of small rigid body displacements. The computational efficiency of the proposed methodology is found to be three orders of magnitude greater than a full three-dimensional methodology, without compromising the accuracy. The results are compared in terms of acoustic radiation with the commercial package Ansys, showing similar sound power levels in almost all the frequency range apart from some differences at low frequencies due to the use of an acoustic model based on radiation ratios., This paper is part of the project PID2020-112886RA-I00, grant FPU18/03999 and grant EST21/00213 funded by MCIN/AEI/10.13039/501100011033 as well as by "ESF Investing in your future". The authors also acknowledge Programa PROMETEO/2021/046 of Generalitat Valenciana, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Disentangling the role of interoceptive sensibility in alexithymia, emotion dysregulation, and depression in healthy individuals

  • Desdentado, Lorena
  • Miragall, Marta
  • Baños, Rosa María
  • Llorens Rodríguez, Roberto|||0000-0002-8677-8707
[EN] Interoception, a multifaceted concept defined as the perception of internal bodily signals, is crucially involved in mental health in general and in emotion regulation in particular, being interoceptive sensibility (IS) one of the most studied interoceptive processes. The main objective of this study was to explore the relationships between IS and emotion regulation processes, analyzing the role of the eight IS dimensions assessed by the Multidimensional Assessment of Interoceptive Awareness-2 (MAIA-2) in alexithymia, emotion dysregulation, and depression. Additionally, this study also aimed to validate the MAIA-2 in a Spanish sample. To do so, 391 healthy adults, native Peninsular Spanish speakers (61.0% women, M-age = 29.00, SDage = 11.40), completed the MAIA-2 and other self-reported questionnaires to measure alexithymia, emotion dysregulation, and depressive symptoms. Results showed that lower scores on the IS dimensions that involve an accepting attitude toward the bodily signals (e.g., not-worrying) were related to alexithymia and emotion dysregulation, which, in turn, predicted depression. Moreover, the eight-factor structure of the MAIA-2 was confirmed with acceptable fit indices. This study highlights the multidimensional nature of the IS and the relevance of IS dimensions that involve a positive appraisal of the body in regulating emotions., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work was supported by Excellence Research Program PROMETEO (PROMETEO/2018/110, Conselleria d'Educacio, Investigacio, Cultura I Esport, Generalitat Valenciana). LD is supported by a grant FPU18/01690 funded by Ministerio de Ciencia e Innovacion/Agencia Estatal de Investigacion/10.13039/501100011033 and by "European Social Fund Investing in your future". The funding sources were not involved in the study design, in the collection, analysis and interpretation of data, in the writing of the report, or in the decision to submit the article for publication.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Probabilistic characterisation of the density, bending strength, and stiffness of timber structural elements from historic buildings

  • Garcia-Castillo, Ester
  • Abián-Pérez, Miguel Angel
  • Paya-Zaforteza, Ignacio
[EN] This paper presents probabilistic models for the density, modulus of rupture, and modulus of elasticity of historic softwood structural elements based on non-destructive testing data. Several probability density functions were fitted to experimental results obtained from three species of the genus Pinus ¿Pinus sylvestris, Pinus nigra, and U.S. southern yellow pine¿ and compared with the probabilistic models recommended by the Joint Committee on Structural Safety (JCSS) for contemporary timber. The results reveal significant differences between the proposed and JCSS models, highlighting the need to account for both species and age (historic versus contemporary) when statistically characterising timber properties. The study confirms that well-preserved historic timber can retain mechanical properties comparable to those of modern wood. The proposed species-specific probability density functions provide a more accurate basis for the probabilistic analysis and reliability assessment of historic timber structures, supporting their preservation and the broader goals of cultural heritage conservation and sustainable construction., This article is part of the Project PID2021 128152NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF/EU. The authors would also like to thank the Spanish Ministry of Science, Innovation and Universities for supporting this research through the PhD grant FPU18/00726 awarded to the first author.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of hybrid monoliths incorporating metal¿organic frameworks for stir bar sorptive extraction coupled with liquid chromatography for determination of estrogen endocrine disruptors in water and human urine samples

  • Zatrochová, S.
  • Martínez-Pérez-Cejuela, H.
  • Simó-Alfonso, E. F.
  • Lhotská, I.
  • atínský, D.
  • Herrero-Martínez, J. M.
  • Catalá-Icardo, Mónica|||0000-0001-5897-8501
[EN] A novel coating based on hybrid monolith with metal-organic framework (MOF) onto conventional Teflon-coated magnetic stir bars was developed. For this purpose, the external surface of the Teflon stir bar was firstly vinylized in order to immobilize a glycidyl methacrylate (GMA)-based polymer onto the magnet. Then, an amino-modified MOF of type MIL-101 (NH2-MIL-101(Al)) was covalently attached to the GMA-based monolith. After the synthesis process, several parameters affecting extraction of target estrogens by stir bar sorptive extraction (SBSE) including pH, ionic strength, extraction time, stirring rate, desorption solvent, and desorption time were also investigated. The resulting hybrid monolith was evaluated as SBSE sorbent for extraction of three estrogens (estrone, 17 beta-estradiol, estriol) and synthetic 17 beta-ethinylestradiol from water and human urine samples followed by HPLC with fluorescence detection (excitation and emission wavelengths, 280 and 310 nm, respectively). Under the optimal experimental conditions, the analytical figures of the method were established, achieving satisfactory limits of detection in the range of 0.015-0.58 mu g L-1, recovery results ranging from 70 to 95% with RSD less than 6%, and precision values (intra- and inter-extraction units) below 6%., H. Martinez-Perez-Cejuela thanks the MSIU for a PhD FPU grant (ref. FPU18/02179). S. Z., I. L., and D. S. acknowledge the financial support of the Charles University (Project SVV 260 548), Charles University Grant Agency (Project GAUK No. 1070120), and EFSA-CDN project (no. CZ.02.1.01/0.0/0.0/16_019/0000841) cofunded by ERDF. This article is based upon work from the Sample Preparation Task Force and Network, supported by the Division of Analytical Chemistry of the European Chemical Society.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparative Analysis of Chromatin-Delivered Biomarkers in the Monitoring of Sepsis and Septic Shock: A Pilot Study

  • Beltrán-García, Jesús
  • García-López, Eva M.
  • Carbonell, Nieves
  • Ferreres, José
  • Rodríguez-Gimillo, María
  • Garcés, Concepción
  • Pallardó, Federico V.
  • García-Giménez, José L.
  • Montoya, Ángel
  • Romá-Mateo, Carlos
  • Manclus Ciscar, Juan José|||0000-0001-6720-1534
[EN] Sepsis management remains one of the most important challenges in modern clinical practice. Rapid progression from sepsis to septic shock is practically unpredictable, hence the critical need for sepsis biomarkers that can help clinicians in the management of patients to reduce the proba-bility of a fatal outcome. Circulating nucleoproteins released during the inflammatory response to infection, including neutrophil extracellular traps, nucleosomes, and histones, and nuclear pro-teins like HMGB1, have been proposed as markers of disease progression since they are related to inflammation, oxidative stress, endothelial damage, and impairment of the coagulation response, among other pathological features. The aim of this work was to evaluate the actual potential for decision making/outcome prediction of the most commonly proposed chromatin-related bi-omarkers (i.e., nucleosomes, citrullinated H3, and HMGB1). To do this, we compared different ELISA measuring methods for quantifying plasma nucleoproteins in a cohort of critically ill pa-tients diagnosed with sepsis or septic shock compared to nonseptic patients admitted to the inten-sive care unit (ICU), as well as to healthy subjects. Our results show that all studied biomarkers can be used to monitor sepsis progression, although they vary in their effectiveness to separate sepsis and septic shock patients. Our data suggest that HMGB1/citrullinated H3 determination in plasma is potentially the most promising clinical tool for the monitoring and stratification of septic patients., This activity received funding from the European Institute of Innovation and Technology (EIT). This body of the European Union receives support from the European Union's Horizon 2020 research and innovation program. C.R-M. thanks GVA for starting grant (GV/2018/127) and Spanish Ministry of Science and Innovation for research project (PID2020-119127RA-I00); J.B-G thanks ISCIII, AES2018 for iPFIS fellowship (IFI18/00015) and GVA for APOTI fellowship (APOTIP/2017/012); CG thanks Spanish Ministry of Universities for fellowship FPU18/03969; J.L.G-G and F.V.P thank INCLIVA, GVA and AES2016 and AES2019 (ISCIII) for starting grant (GV/2014/132), project PI16/01036 and PI19/00994 and project DTS17/00132 (co-financed by the ERDF). The project leading to these results has received funding from "la Caixa" Foundation (ID 100010434), under agreement CI18-0009. C.R-M., F.V.P. and A.M. thank Grand Challenges Canada. : We want to particularly acknowledge the patients and the INCLIVA Biobank (PT17/0015/0049; B.000768 ISCIII) integrated in the Valencian Biobanking Network and the Spanish National Biobanks Network for their collaboration.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A quantitative autonomous bioluminescence reporter system with a wide dynamic range for Plant Synthetic Biology

  • Calvache-Román, Camilo Alberto
  • Vázquez-Vilar, Marta
  • Moreno-Giménez, Elena
  • Orzáez Calatayud, Diego Vicente
[EN] Plant Synthetic Biology aims to enhance the capacities of plants by designing and integrating synthetic gene circuits (SGCs). Quantitative reporting solutions that can produce quick, rich datasets affordably are necessary for SGC optimization. In this paper, we present a new, low-cost, and high-throughput reporter system for the quantitative measurement of gene expression in plants based on autonomous bioluminescence. This method eliminates the need for an exogenous supply of luciferase substrate by exploiting the entire Neonothopanus nambi fungal bioluminescence cyclic pathway to build a self-sustained reporter. The HispS gene, the pathway's limiting step, was set up as the reporter's transcriptional entry point as part of the new system's design, which significantly improved the output's dynamic range and brought it on par with that of the gold standard FLuc/RLuc reporter. Additionally, transient ratiometric measurements in N. benthamiana were made possible by the addition of an enhanced GFP as a normalizer. The performance of new NeoLuc/eGFP system was extensively validated with SGCs previously described, including phytohormone and optogenetic sensors. Furthermore, we employed NeoLuc/eGFP in the optimization of challenging SGCs, including new configurations for an agrochemical (copper) switch, a new blue optogenetic sensor, and a dual copper/red-light switch for tight regulation of metabolic pathways., The authors would like to thank Matias Zurbriggen for sharing the plasmids of the red-light system and Jorge Lozano-Juste for sharing the plasmid with the MAPKKK18 promoter. The authors also would like to thank Alberto Conejero for his assistance with data analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Deep continual learning for medical call incidents text classification under the presence of dataset shifts

  • Ferri-Borredà, Pablo|||0000-0002-3083-1169
  • Sáez Silvestre, Carlos|||0000-0003-2678-8249
  • Garcia-Gomez, Juan M
  • Lomonaco, Vincenzo
  • Passaro, Lucia C.
  • Félix-De Castro, Antonio
  • Sánchez-Cuesta, Purificación
[EN] The aim of this work is to develop and evaluate a deep classifier that can effectively prioritize Emergency Medical Call Incidents (EMCI) according to their life-threatening level under the presence of dataset shifts. We utilized a dataset consisting of 1 982 746 independent EMCI instances obtained from the Health Services Department of the Region of Valencia (Spain), with a time span from 2009 to 2019 (excluding 2013). The dataset includes free text dispatcher observations recorded during the call, as well as a binary variable indicating whether the event was life-threatening. To evaluate the presence of dataset shifts, we examined prior probability shifts, covariate shifts, and concept shifts. Subsequently, we designed and implemented four deep Continual Learning (CL) strategies¿cumulative learning, continual fine-tuning, experience replay, and synaptic intelligence¿alongside three deep CL baselines¿joint training, static approach, and single finetuning¿based on DistilBERT models. Our results demonstrated evidence of prior probability shifts, covariate shifts, and concept shifts in the data. Applying CL techniques had a statistically significant (¿ = 0.05) positive impact on both backward and forward knowledge transfer, as measured by the F1-score, compared to noncontinual approaches. We can argue that the utilization of CL techniques in the context of EMCI is effective in adapting deep learning classifiers to changes in data distributions, thereby maintaining the stability of model performance over time. To our knowledge, this study represents the first exploration of a CL approach using real EMCI data., This work has received support from the Ministry of Science, Innovation, and Universities of Spain through the FPU18/06441 program. In addition, it has been partly funded by PNRR-M4C2-Investimento 1.3, Partenariato Esteso PE00000013-FAIR-Future Artificial Intelligence Research-Spoke 1 Human-centered AI, funded by the European Commission under the NextGeneration EU programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Extremely missing numerical data in Electronic Health Records for machine learning can be managed through simple imputation methods considering informative missingness: A comparative of solutions in a COVID-19 mortality case study

  • Ferri-Borredà, Pablo|||0000-0002-3083-1169
  • Garcia-Gomez, Juan M
  • Sáez Silvestre, Carlos|||0000-0003-2678-8249
  • Romero-Garcia, Nekane
  • Badenes, Rafael
  • Lora-Pablos, David
  • García Morales, Teresa
  • Gómez de la Cámara, Agustín
[EN] Background and objective: Reusing Electronic Health Records (EHRs) for Machine Learning (ML) leads on many occasions to extremely incomplete and sparse tabular datasets, which can hinder the model development processes and limit their performance and generalization. In this study, we aimed to characterize the most effective data imputation techniques and ML models for dealing with highly missing numerical data in EHRs, in the case where only a very limited number of data are complete, as opposed to the usual case of having a reduced number of missing values. Methods: We used a case study including full blood count laboratory data, demographic and survival data in the context of COVID-19 hospital admissions and evaluated 30 processing pipelines combining imputation methods with ML classifiers. The imputation methods included missing mask, translation and encoding, mean imputation, k-nearest neighbors' imputation, Bayesian ridge regression imputation and generative adversarial imputation networks. The classifiers included k-nearest neighbors, logistic regression, random forest, gradient boosting and deep multilayer perceptron. Results: Our results suggest that in the presence of highly missing data, combining translation and encoding imputation-which considers informative missingness-with tree ensemble classifiers-random forest and gradient boosting-is a sensible choice when aiming to maximize performance, in terms of area under curve. Conclusions: Based on our findings, we recommend the consideration of this imputer-classifier configuration when constructing models in the presence of extremely incomplete numerical data in EHR., This work was supported by FONDO SUPERA COVID-19 by CRUE-Santander Bank grant "Severity Subgroup Discovery and Classification on COVID-19 Real World Data through Machine Learning and Data Quality assessment (SUBCOVERWD-19) " and by the Ministry of Science, Innovation and Universities of Spain program FPU18/06441.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of short-term operating temperatures on compression and flexural behaviour of Macro Synthetic and Steel Fibre Reinforced Concretes

  • Caballero-Jorna, Marta
  • Roig-Flores, Marta
  • Serna, Pedro
[EN] This study investigates the influence of operating temperatures on the mechanical properties of Fibre Reinforced Concretes (FRCs) when exposed during short-term periods (3 days). The studied parameters include types of fibres (macro synthetic and steel fibres), exposure to different envi-ronmental scenarios (with temperatures of -15, 5, 20, 40 and 60 & DEG;C as well as air exposition or submerged condition), and cracking conditions (precracked up to 0.5 mm or uncracked). A total of 126 cubes of 150 mm side and 182 prisms of 150 x 150 x 600 mm3 were tested in compres-sion and flexion at the operating temperatures. The compression results obtained show similar ef-fects in FRC and in plain concrete, with higher strength at low temperatures and slightly lower strength at higher temperatures. Similar effects were detected for the strength at the peak load, and to a minor extent, for the residual flexural strengths, for all the FRCs., The authors thank to the Spanish Ministry of Science, Innovation and Universities for the funding received under the FPU Program [grant number FPU18/06145].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparative Life Cycle Analysis of Concrete and Composite Bridges Varying Steel Recycling Ratio

  • Martínez-Muñoz, D.|||0000-0002-6906-3830
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Yepes, V.|||0000-0001-5488-6001
[EN] Achieving sustainability is currently one of the main objectives, so a consensus between different environmental, social, and economic aspects is necessary. The construction sector is one of the main sectors responsible for environmental impacts worldwide. This paper proposes the life cycle assessment (LCA) and comparison of four bridge deck alternatives for different span lengths to determine which ones are the most sustainable solutions. The ReCiPe method is used to conduct the life cycle analysis, by means of which the impact value is obtained for every alternative and span length. The Ecoinvent 3.3 database has been used. The life cycle has been divided into four phases: manufacturing, construction, use and maintenance, and end of life. The associated uncertainties are considered, and the results are shown in both midpoint and endpoint approaches. The results of our research show that for span lengths less than 17 m, the best alternative is the prestressed concrete solid slab. For span lengths between 17 and 25 m, since the box-girder solution is not used, then the prestressed concrete lightened slab is the best alternative. For span lengths between 25 and 40 m, the best solution depends on the percentage of recycled structural steel. If this percentage is greater than 90%, then the best alternative is the composite box-girder bridge deck. However, if the percentage is lower, the cleanest alternative is the prestressed concrete box-girder deck. Therefore, the results show the importance of recycling and reusing structural steel in bridge deck designs., This research was funded by Spanish Ministry of Economy and Business (Project: BIA201785098-R), the Spanish Ministry of Science and Innovation (Project: PID2020-117056RB-I00), along with FEDER funding and Spanish Ministry of Science, Innovation and Universities for David MartinezMunoz's University Teacher Training Grant (FPU-18/01592).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical Analysis of the Effects of Different Rotor Tip Gaps in a Radial Turbine Operating at High Pressure Ratios Reaching Choked Flow

  • Galindo, José|||0000-0001-6068-182X
  • Tiseira, Andrés-Omar|||0000-0001-9472-2386
  • Navarro, Roberto|||0000-0003-2587-4954
  • Echavarria-Olaya, Juan David|||0000-0002-9611-0751
  • Inhestern, Lukas Benjamin
[EN] To operate, radial turbines used in turbochargers require a minimum tip gap between the rotor blades and the stationary wall casing (shroud). This gap generates leakage flow driven by the pressure difference between the pressure and suction side. The tip leakage flow is largely unturned, which translates into a reduction of the shaft work due to the decrease in the total pressure. This paper investigates the flow through the rotor blade tip gap and the effects on the main flow when the turbine operates at a lower and higher pressure ratio with the presence of supersonic regions at the rotor trailing edge for two rotational speeds using computational fluid dynamics (CFD). The rotor tip gap has been decreased and increased up to 50% of the original tip gap geometry given by the manufacturer. Depending on the operational point, the results reveal that a reduction of 50% of the tip gap can lead to an increase of almost 3% in the efficiency, whereas a rise in 50% in the gap penalty the efficiency up to 3%. Furthermore, a supersonic region appears in the tip gap just when the flow enters through the pressure side, then the flow accelerates, leaving the suction side with a higher relative Mach number, generating a vortex by mixing with the mainstream. The effects of the vortex with the variation of the tip gap on the choked area at the rotor trailing edge presents a more significant change at higher than lower speeds. At a higher speed, the choked region closer to the shroud is due to the high relative inlet flow angle and the effects of the high relative motion of the shroud wall. Furthermore, this relative motion forces the tip leakage vortex to stay closer to the tip suction side, generating a subsonic region, which increases with the tip gap height. The leakage flow at lower and higher rotational speed does not affect the main flow close to the hub. However, close to the shroud, the velocity profile changes, and the generated entropy increases when the flow goes through the tip gap., The work has been partially supported by the Subprograma de Formación de Profesorado Universitario (FPU). Ministerio de Universidades. FPU18/02628.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Gibberellins regulate ovule number through a DELLA-CUC2 complex in Arabidopsis

  • Barro-Trastoy, Daniela
  • Gómez, María D.
  • Blanco-Touriñán, Noel|||0000-0003-4610-6110
  • Tornero Feliciano, Pablo|||0000-0001-9755-7726
  • PEREZ AMADOR, MIGUEL ANGEL|||0000-0003-4518-3544
[EN] Ovule development is a key process for plant reproduction, helping to ensure correct seed production. Several molecular factors and plant hormones such as gibberellins are involved in ovule initiation and development. Gibberellins control ovule development by the destabilization of DELLA proteins, whereas DELLA activity has been shown to act as a positive factor for ovule primordia emergence. But the molecular mechanism by which DELLA acts in ovule primordia initiation remained unknown. In this study we report that DELLA proteins participate in ovule initiation by the formation of a protein complex with the CUC2 transcription factor. The DELLA protein GAI requires CUC2 to promote ovule primordia formation, through the direct GAI-CUC2 interaction in placental cells that would determine the boundary regions between ovules during pistil development. Analysis of GAI-CUC2 interaction and co-localization in the placenta supports this hypothesis. Moreover, molecular analysis identified a subset of the loci for which the GAI protein may act as a transcriptional co-regulator in a CUC2-dependent manner. The DELLA-CUC2 complex is a component of the gene regulatory network controlling ovule primordia initiation in Arabidopsis., We wish to thank Dr. N. Arnaud (INRAE-Versailles, France) for the pCUC1:CUC1-GFP and pCUC2:CUC2-VENUS lines, Dr. D. Alabadi (IBMCP, Valencia, Spain) for the 35S:YFP-M5GAI line and GAI deletions in pDEST32, and Dr. S. Prat (CNB-Madrid, Spain) for the M5-DELLA clones in pGBKT7. We also thank Ms. C. Fuster for her excellent technical assistance and the IBMCP Bioinformatics Core Service for helping in the data processing. This work was supported by grants from the Spanish Ministry of Economy and Competitiveness-FEDER (BIO2017-83138R) and Spanish Ministry of Science and Innovation-AEI (PID2020-113920RB-I00) to MAP-A; DB-T was the recipient of a pre-doctoral fellowship from the Spanish Ministry of Universities (FPU18/00331).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Choking dynamic of highly swirled flow in variable nozzle radial turbines

  • Tiseira, Andrés-Omar|||0000-0001-9472-2386
  • Dolz, Vicente|||0000-0003-1511-6957
  • Echavarria-Olaya, Juan David|||0000-0002-9611-0751
  • Inhestern, Lukas Benjamin
[EN] This paper presents the results of a computational investigation of the aerodynamic choking mechanism in a variable geometry turbine, which is widely used in automotive turbocharging. RANS and URANS numerical simulations were carried out for two stator vane positions, 10% and 30% opening at different speeds and several other operating conditions to observe the establishment of choked flow and rotorstator interactions. When the stator vanes are at a closed position and high-pressure ratio, a shock wave is developed on the suction side of the stator vane; moreover, the effective area extends toward the rotor inlet. The shock losses of a fluid particle upstream of the rotor are related to the number of shocks that the particle goes through. The pressure losses are high close to the stator vanes and start to decrease toward the center of the vaneless space until they start to increase close to the rotor. The interaction between the rotor and stator creates shocks waves with an intensity depending on the rotor's leading edge position and the rotational speed. The pressure profile of the rotor blade under this circumstance is also affected, especially at high rotational speeds, when important load fluctuations may affect the integrity of the blades., The work has been partially supported by the Subprograma de Formación de Profesorado Universitario (FPU). Ministerio de Universidades. FPU18/02628 and by the FPI Subprograma. Universitat Politècnica de València. PAID-10-18
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

FungalBraid 2.0: expanding the synthetic biology toolbox for the biotechnological exploitation of filamentous fungi

  • Moreno-Giménez, Elena
  • Gandía, Mónica
  • Sáez, Zara
  • Manzanares, Paloma
  • Marcos, Jose F.
  • Garrigues, Sandra
  • Yenush, Lynne|||0000-0001-8589-7002
  • Orzáez Calatayud, Diego Vicente
[EN] Fungal synthetic biology is a rapidly expanding field that aims to optimize the biotechnological exploitation of fungi through the generation of standard, readyto-use genetic elements, and universal syntax and rules for contributory use by the fungal research community. Recently, an increasing number of synthetic biology toolkits have been developed and applied to filamentous fungi, which highlights the relevance of these organisms in the biotechnology field. The FungalBraid (FB) modular cloning platform enables interchangeability of DNA parts with the GoldenBraid (GB) platform, which is designed for plants, and other systems that are compatible with the standard Golden Gate cloning and syntax, and uses binary pCAMBIA-derived vectors to allow Agrobacterium tumefaciensmediated transformation of a wide range of fungal species. In this study, we have expanded the original FB catalog by adding 27 new DNA parts that were functionally validated in vivo. Among these are the resistance selection markers for the antibiotics phleomycin and terbinafine, as well as the uridine-auxotrophic marker pyr4. We also used a normalized luciferase reporter system to validate several promoters, such as PpkiA,P7760,Pef1¿, and PafpB constitutive promoters, and PglaA,PamyB, and PxlnA inducible promoters. Additionally, the recently developed dCas9-regulated GB_SynP synthetic promoter collection for orthogonal CRISPR activation (CRISPRa) in plants has been adapted in fungi through the FB system. In general, the expansion of the FB catalog is of great interest to the scientific community since it increases the number of possible modular and interchangeable DNA assemblies, exponentially increasing the possibilities of studying, developing, and exploiting filamentous fungi., This work was supported by PROMETEO/2018/066 from "Conselleria d'Educacio" (Generalitat Valenciana, Comunitat Valenciana, Spain), grant PID2021-125858OB-100, and the Severo Ochoa Excellence Program CEX 2021-001189-S funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe." EM-G was the recipient of a predoctoral grant FPU18/02019 funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future." SG holds a Juan de la Cierva Incorporacion grant (IJC 2020-042749-I) funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Newly Developed MAGIC Population Allows Identification of Strong Associations and Candidate Genes for Anthocyanin Pigmentation in Eggplant

  • Mangino, Giulio
  • Pook, Torsten
  • Arrones-Olmo, Andrea|||0000-0003-3926-0291
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Gramazio, Pietro|||0000-0003-2226-7999
  • Vilanova Navarro, Santiago|||0000-0003-4939-9713
[EN] Multi-parent advanced generation inter-cross (MAGIC) populations facilitate the genetic dissection of complex quantitative traits in plants and are valuable breeding materials. We report the development of the first eggplant MAGIC population (S3 Magic EGGplant InCanum, S3MEGGIC; 8-way), constituted by the 420 S3 individuals developed from the intercrossing of seven cultivated eggplant (Solanum melongena) and one wild relative (S. incanum) parents. The S3MEGGIC recombinant population was genotyped with the eggplant 5k probes SPET platform and phenotyped for anthocyanin presence in vegetative plant tissues (PA) and fruit epidermis (FA), and for the light-insensitive anthocyanic pigmentation under the calyx (PUC). The 7,724 filtered high-confidence single-nucleotide polymorphisms (SNPs) confirmed a low residual heterozygosity (6.87%), a lack of genetic structure in the S3MEGGIC population, and no differentiation among subpopulations carrying a cultivated or wild cytoplasm. Inference of haplotype blocks of the nuclear genome revealed an unbalanced representation of the founder genomes, suggesting a cryptic selection in favour or against specific parental genomes. Genome-wide association study (GWAS) analysis for PA, FA, and PUC detected strong associations with two myeloblastosis (MYB) genes similar to MYB113 involved in the anthocyanin biosynthesis pathway, and with a COP1 gene which encodes for a photo-regulatory protein and may be responsible for the PUC trait. Evidence was found of a duplication of an ancestral MYB113 gene with a translocation from chromosome 10 to chromosome 1 compared with the tomato genome. Parental genotypes for the three genes were in agreement with the identification of the candidate genes performed in the S3MEGGIC population. Our new eggplant MAGIC population is the largest recombinant population in eggplant and is a powerful tool for eggplant genetics and breeding studies., This work was supported by the Ministerio de Ciencia, Innovacion y Universidades, Agencia Estatal de Investigacion and Fondo Europeo de Desarrollo Regional (grant RTI2018-094592-B-I00 from MCIU/AEI/FEDER, UE) and European Unions Horizon, 2020 Research and Innovation Programme under grant agreement no. 677379 (G2P-SOL project: Linking genetic resources, genomes and phenotypes of Solanaceous crops). AA is grateful to Spanish Ministerio de Ciencia, Innovacion y Universidades for a pre-doctoral (FPU18/01742) contract. MP is grateful to Spanish Ministerio de Ciencia e Innovacion for a post-doctoral grant (IJC2019-039091-I/AEI/10.13039/501100011033). PG is grateful to Spanish Ministerio de Ciencia e Innovacion for a post-doctoral grant (FJC2019-038921-I/AEI/10.13039/501100011033). Funding for open access charge: Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of long-term ageing by temperatures on mechanical behaviour of Fibre Reinforced Concretes

  • Caballero-Jorna, Marta
  • Roig-Flores, Marta
  • Serna Ros, Pedro|||0000-0001-8754-1165
[EN] This study examines the effect of ageing by operating temperatures on the mechanical properties of Fibre Reinforced Concretes (FRCs) when exposed during long-term periods (180 days of conditioning). There is little information in the literature about long-term mechanical performance of steel (SFRC), and especially, macro synthetic fibre reinforced concretes (MSFRCs), which may be affected due to this exposure. One type of steel fibre and three types of macro synthetic fibres were selected to reinforce an ordinary concrete in this work. An extensive experimental campaign (with a total of 260 specimens) which includes compression and flexural tests performed at temperatures, was carried out to investigate the influence of a range of temperature from-15 to 60 degrees C. Additionally, the interaction between cracking conditions (up to 0.5 mm) and temperature was analyzed for both type of FRC beams. The compression results obtained show higher strengths at low temperatures (25-30 %) and a decrease on the strengths at higher temperatures (15-20 %), but these variations are not crucial on the ageing of FRCs. Similar effects were detected for the strength at the peak load, and to a minor extent, for the residual flexural strengths, for all the FRCs. Specimens with a pre-existing crack (cracked condition) exposed to the studied temperature had the same results as uncracked specimens. Thus, both FRCs have the potential to obtain appropriate results for structural applications when exposed to the studied temperatures., The authors thank to the Spanish Ministry of Science, Innovation and Universities for the funding received under the FPU Program [grant number FPU18/06145].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microporous 3D graphitic carbons obtained by soft templating as carbocatalysts for aerobic oxidation

  • Garcia-Mulero, Ana
  • Dhakshinamoorthy, Amarajothi
  • Garcia-Baldovi, Hermenegildo
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Herein it is reported that chitosan, a natural filmogenic biopolymer, can undergo soft-templating in liquid phase under hydrothermal conditions by two typical structure directing agents, namely hexamethyleneimine (HMI) and tetraethylammonium (TEA) employed in the synthesis of zeolites MCM-22 and Beta, respectively. After templation, pyrolysis of chitosan under inert atmosphere renders 3D graphitic sponges with defined ultra- and microporous channels. These porous structured graphitic carbons exhibit much enhanced activity as metal-free catalyst in the aerobic oxidation of benzylamine compared to other analogous 2D graphene oxide and reduced graphene oxide, as well as large area active carbons. It is proposed that this superior activity of these 3D structured microporous carbons derives from confinement effects activating molecular oxygen and benzylamine within the micropores. Quenching studies indicate that the reactive oxygen species are mostly adsorbed within the pores of the 3D graphitic carbons, Financial support by the Spanish Ministry of Science and Innovation (RTI2018-098237-CO2-R1 and Severo Ochoa) and Generalitat Valenciana (Prometeo 2017/083) is gratefully acknowledged. H.G.B. and A.P. thank the Generalitat Valenciana and Spanish Ministry of Science and Innovation for their research associate contracts. A.G.M. thanks the Spanish Ministry of Science and Innovation for the scholarship FPU18/02706. A.D. thanks University Grants Commission for awarding Assistant Professorship under the Faculty recharge program
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Conventional and new genetic resources for an eggplant breeding revolution

  • Gramazio, Pietro|||0000-0003-2226-7999
  • Arrones-Olmo, Andrea|||0000-0003-3926-0291
  • Villanueva-Párraga, Gloria|||0000-0002-1475-2882
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • Vilanova Navarro, Santiago|||0000-0003-4939-9713
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Alonso-Martín, David
  • Toppino, Laura
  • Barchi, Lorenzo
  • Portis, Ezio
  • Ferrante, Paola
  • Lanteri, Sergio
  • Rotino, Giuseppe Leonardo
  • Giuliano, Giovanni
[EN] Eggplant (Solanum melongena) is a major vegetable crop with great potential for genetic improvement owing to its large and mostly untapped genetic diversity. It is closely related to over 500 species of Solanum subgenus Leptostemonum that belong to its primary, secondary, and tertiary genepools and exhibit a wide range of characteristics useful for eggplant breeding, including traits adaptive to climate change. Germplasm banks worldwide hold more than 19 000 accessions of eggplant and related species, most of which have yet to be evaluated. Nonetheless, eggplant breeding using the cultivated S. melongena genepool has yielded significantly improved varieties. To overcome current breeding challenges and for adaptation to climate change, a qualitative leap forward in eggplant breeding is necessary. The initial findings from introgression breeding in eggplant indicate that unleashing the diversity present in its relatives can greatly contribute to eggplant breeding. The recent creation of new genetic resources such as mutant libraries, core collections, recombinant inbred lines, and sets of introgression lines will be another crucial element and will require the support of new genomics tools and biotechnological developments. The systematic utilization of eggplant genetic resources supported by international initiatives will be critical for a much-needed eggplant breeding revolution to address the challenges posed by climate change., This work was supported by the following grants: CIPROM/2021/020 from Conselleria d'Innovació, Universitats, Ciència i Societat Digital (Generalitat Valenciana, Spain); PID2021-128148OB-I00 funded by MCIN/AEI/10.13039/501100011033/ and by ERDF A way of making Europe ; PDC2022-133513-I00 funded by MCIN/AEI/10.13039/501100011033/, and by European Union NextGenerationEU/PRTR; Grant Agreement No. 677379 (G2PSOL project: Linking genetic resources, genomes and phenotypes of solanaceous crops) from European Union's Horizon 2020 Research and Innovation Programme; Grant Agreement No. 101094738 (PROGRACE project: Promoting a Plant Genetic Resource Community for Europe) from the European Union's Horizon Europe programme. PG is grateful to Spanish Ministerio de Ciencia e Innovación for a post-doctoral grant (RYC2021-031999-I) funded by MCIN/AEI/10.13039/501100011033 and the European Union through NextGenerationEU/PRTR. AA is grateful to Spanish Ministerio de Ciencia, Innovación y Universidades for a pre-doctoral (FPU18/01742) contract. GV is grateful to Spanish Ministerio de Ciencia e Innovación for a pre-doctoral grant (PRE2019- 103375) funded by MCIN/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Game-Theory-Based Multi-Objective Optimization for Enhancing Environmental and Social Life Cycle Assessment in Steel Concrete Composite Bridges

  • Martínez-Muñoz, D.|||0000-0002-6906-3830
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Yepes, V.|||0000-0001-5488-6001
[EN] The design of bridges must balance sustainability and construction simplicity. A game-theory-based optimization method was applied in this research to find a sustainable steel¿concrete composite bridge design. The sustainability was evaluated through cost and environmental and social impact using the Life Cycle Assessment method. The optimization process considered four criteria simultaneously, using a discrete version of the SCA algorithm and a transfer function for discretization. The preferred solutions were selected using the Minkowski distances approach. Results showed a decrease in slab reinforcement and an increase in the amount of steel in the cross-section, leading to only an 8.2¿ increase in cost compared to similar studies. Regarding the cross-section, the geometry obtained considers cells in the upper and lower parts of the webs to improve the bending resistance. The proposed method allows for the simultaneous optimization of multiple criteria and provides a sustainable yet simple bridge design solution., The authors gratefully acknowledge the funding received from the following research projects: Grant PID2023-150003OB-I00, funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU , and Grant FPU-18/01592, funded by MCIN/AEI/10.13039/501100011033 and by ESF invests in your future .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of Decellularized Oviductal Hydrogels as a Support for Rabbit Embryo Culture

  • Francés-Herrero, Emilio
  • De Miguel-Gómez, Lucía
  • López-Martínez, Sara
  • Campo, Hannes
  • Garcia-Dominguez, Ximo
  • Diretto, Gianfranco
  • Faus, Amparo
  • Cervelló, Irene
  • Vicente Antón, José Salvador|||0000-0003-0481-3802
  • Marco-Jiménez, Francisco|||0000-0002-5226-4118
[EN] The oviducts (fallopian tubes in mammals) function as the site of fertilization and provide necessary support for early embryonic development, mainly via embryonic exposure to the tubal microenvironment. The main objective of this study was to create an oviduct-specific extracellular matrix (oviECM) hydrogel rich in bioactive components that mimics the native environment, thus optimizing the developmental trajectories of cultured embryos. Rabbit oviducts were decellularized through SDS treatment and enzymatic digestion, and the acellular tissue was converted into oviductal pre-gel extracellular matrix (ECM) solutions. Incubation of these solutions at 37 degrees C resulted in stable hydrogels with a fibrous structure based on scanning electron microscopy. Histological staining, DNA quantification and colorimetric assays confirmed that the decellularized tissue and hydrogels contained no cellular or nuclear components but retained important components of the ECM, e.g. hyaluronic acid, glycoproteins and collagens. To evaluate the ability of oviECM hydrogels to maintain early embryonic development, two-cell rabbit embryos were cultured on oviECM-coated surfaces and compared to those cultured with standard techniques. Embryo development was similar in both conditions, with 95.9% and 98% of the embryos reaching the late morula/early blastocyst stage by 48 h under standard culture and oviECM conditions, respectively. Metabolomic analysis of culture media in the presence or absence of embryos, however, revealed that the oviECM coating may include signalling molecules and release compounds beneficial to embryo metabolism., This study was supported by Instituto de Salud Carlos III (PI17/01039-CP19/00149 [Irene Cervello]), Ministry of Economy, Industry and Competitiveness (AGL2017-85162-C2-1-R [Francisco Marco], BES-2015-072429 [Ximo Garcia]), Ministry of Science, Innovation and Universities (FPU18/06327 [Emilio Frances]) and Generalitat Valenciana (PROMETEO/2018/137 [Irene Cervello, Lucia de Miguel], ACIF/2017/118 [Sara Lopez]). The proteomics laboratory is a member of ProteoRed, PRB3, and is supported by grant PT17/0019 of the State Plan I+D+i 2013-2016, funded by Instituto de Salud Carlos III and European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Studies on the biological role of the antifungal protein PeAfpA from Penicillium expansum by functional gene characterization and transcriptomic profiling

  • Ropero-Pérez, Carolina
  • Moreno-Giménez, Elena
  • Marcos, Jose F.
  • Manzanares, Paloma
  • Gandía, Mónica
[EN] Antifungal proteins (AFPs) from filamentous fungi have enormous potential as novel biomolecules for the control of fungal diseases. However, little is known about the biological roles of AFPs beyond their antifungal action. Penicillium expansum encodes three phylogenetically different AFPs (PeAfpA, PeAfpB and PeAfpC) with diverse profiles of antifungal activity. PeAfpA stands out as a highly active AFP that is naturally produced at high yields. Here, we provide new data about the function of PeAfpA in P . expansum through phenotypical characterization and transcriptomic studies of null mutants of the corresponding afpA gene. Mutation of afpA did not affect axenic growth, conidiation, virulence, stress responses or sensitivity towards P . expansum AFPs. However, RNA sequencing evidenced a massive transcriptomic change linked to the onset of PeAfpA production. We identified two large gene expression clusters putatively involved in PeAfpA function, which correspond to genes induced or repressed with the production of PeAfpA. Functional enrichment analysis unveiled significant changes in genes related to fungal cell wall remodeling, mobilization of carbohydrates and plasma membrane transporters. This study also shows a putative co-regulation between the three afp genes. Overall, our transcriptomic analyses provide valuable insights for further understanding the biological functions of AFPs., This work was supported by grant PID2021-125858OB-100 and the Severo Ochoa Excellence Program CEX2021-001189-S, funded by MCIN/AEI/10.13039/501100011033 and by "ERDF, a way of making Europe." C.R.P. and EM -G were recipients of predoctoral grants ACIF/2021/364 funded by Conselleria d'Educaci o (Generalitat Valenciana, Comunitat Valenciana, Spain) and FPU18/02019 funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future", respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Approximation to the Use of Half-Timbered Walls with Earth Infill in Spanish Traditional Archtiecture

  • Hueto-Escobar, Alicia|||0000-0003-4628-6545
  • Vegas López-Manzanares, Fernando|||0000-0003-0315-6839
  • Manzano-Fernández, Sergio|||0000-0001-7936-1324
  • Diodato, Maria
[EN] The term "half-timbered walls with earth infill" refers to a wide number of techniques in which structural wooden elements are combined with enclosures made of earth. The use of these constructive systems dates back to prehistoric times and their evolution has differed based on the physical, social and cultural conditions of each place. Therefore, the objective of this paper is to define the concept of half-timbered walls with earth infill in the Spanish context and to understand the geographical, urban, architectural and constructive reasons that have favoured or hindered its use in traditional architecture. The methodology used is based on the quantitative and qualitative analysis of the largest possible number of case studies. This allows a database to be set up for the purposes of performing global analysis and drawing objective and statistically valid conclusions. This information is managed using a study sheet with information ranging from general aspects of buildings with the presence of these techniques to detailed features of half-timbered walls. The data and conclusions presented in this paper focus on these half-timbered walls, including information on the geographical distribution of these techniques, the characteristics of the buildings in which they are used, the combination of mixed walls with other construction techniques, and the state of conservation and transformation of the buildings in which they are used. It has been established that these techniques are common in mountainous landscapes, where there is optimal woodland for construction, and in urban environments, where they are presented as optimum techniques to maximize the profitability of the buildable surface., This study is part of the research project La arquitectura de tierra en la Península Ibérica: Estudio de los riesgos naturales, sociales y antrópicos y estrategias de intervención e incremento de la resiliencia Risk-Terra (ref. RTI2018- 095302-B-I00; main researchers: Camilla Mileto y Fernando Vegas), funded by the Spanish Ministry of Science, Innovation and University. The identification and location of many case studies has been possible thanks to the earlier research project La restauración y rehabilitación de arquitectura tradicional de tierra en la Península Ibérica. Líneas guía y herramientas para una intervención sostenible SOStierra (ref. BIA 2014-55924- R, main researchers: Camilla Mileto y Fernando Vegas) funded by the Spanish Ministry of Economy and Competitiveness. The authors wish to thank all the researchers who took part in the process of locating, identifying, and documenting a large number of buildings with earth construction techniques. This research has been developed within a doctoral thesis funded by the Spanish Ministry of Science, Innovation and University (Ref. FPU18/01596).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bi-Functional Topospecific Nanoparticles to Promote Immune-Tumor Cell Engagement as A New Immunotherapeutic Strategy

  • Ortuño-Bernal, Alba Amparo
  • Clara-Trujillo, Sandra|||0000-0002-6455-2993
  • Hicke-García, Francisco Javier|||0000-0002-8419-0467
  • Escudero-Noguera, Andrea|||0000-0003-2670-6127
  • García-Fernández, Alba|||0000-0002-8416-1674
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Lucena-Sánchez, Elena
  • Pradana-López, Sandra
  • Jiménez-Alduán, Nelia
  • Diez-Sánchez, Paula
[EN] Cancer immunotherapy has emerged as a promising alternative approach, enabling the body's immune system to fight cancer. Cytotoxic T cells play a pivotal role in recognizing and eliminating tumor cells, and their effectiveness relies on establishing a physical interaction and efficient communication with cancer cells. However, this communication is often disrupted by immune escape mechanisms, allowing cancer progression. A versatile nanoplatform is developed to restore cellular connection using Janus mesoporous silica-Au nanoparticle (J-pHLIP-PD1), including specific binding sites on opposite faces for simultaneous binding to cancer cells and immune cells. The two differential surfaces on the nanoparticle allow orthogonal functionalization with the anti-PD-1 antibody that interacts with the PD-1 receptor in cytotoxic T cells on the gold face and the pH Low Insertion Peptide (pHLIP), which undergoes specific insertion into the tumor cell membrane on the silica face. J-pHLIP-PD1 nanoparticles effectively bind the surface of tumor cells and capture T cells, facilitating the formation of immune synapse-like structures that lead to reduced cancer cell viability in vitro, associated with immunogenic cell death signatures. The therapeutic potential of J-pHLIP-PD1 is also demonstrated in an in vivo metastatic melanoma model, where treatment with J-pHLIP-PD1 produces a significant decrease in metastatic burden and increases T cell presence. The Janus nanosystem represents an attractive platform that expands the toolbox of immune-engaging strategies, offering a flexible alternative to conventional immunotherapies that link immune and tumor cells, restoring cell-cell communication for cancer elimination., A. Ortuno-Bernal, S. Clara-Trujillo and E. Lucena-Sanchez have con-tributed equally to this work. This work was supported by the European Research Council (ERC) via Advanced Grant (101052997, EDI-SON). The authors thank the Spanish Government, project PID2021-126304OB-C41 by MCIN/ AEI /10.13039/501100011033/ and by European Regional Development Fund-A way of doing Europe. This studywas also supported by the Generalitat Valenciana (project PROMETEOCIPROM/2021/007). This study forms part of the Advanced Materials pro-gram (MFA/2022/049) and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana. This work was also supported by CIBER -Consorcio Centro deInvestigacion Biomedica en Red- (CB06/01/2012), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovacion. A.G-F. thanks the financial support from FC AECC (IDEAS246782GARC). E.L.-S is grateful for herFPU fellowship funded by MINECO (FPU18/06539). F.J.H thanks MIUfor his FPU grant (FPU20/06021). A.O.B acknowledges support from apredoctoral fellowship funded by the Generalitat Valenciana (GVA, Grant No.CIACIF/2023/320). Samples included in this study were provided bythe Biobanco La Fe (B.0000723) and they were processed following stan-dard operating procedures with the appropriate approval of the Ethics andScientific Committees. Graphical images and schemes were created withBioRender.com.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Combining pharmacokinetic and electrophysiological models for early prediction of drug-induced arrhythmogenicity

  • Llopis-Lorente, Jordi
  • Baroudi, Samuel
  • Koloskoff, Kévin
  • Basset, Matthieu
  • Benito, Sylvain
  • Dayan, Frederic
  • Mora-Fenoll, María Teresa|||0000-0002-8069-2486
  • Romero Pérez, Lucia|||0000-0003-4605-8630
  • Saiz Rodríguez, Francisco Javier|||0000-0002-9850-0825
  • Trenor Gomis, Beatriz Ana|||0000-0001-9166-6112
[EN] Background and Objective: In silico methods are gaining attention for predicting drug-induced Torsade de Pointes (TdP) in different stages of drug development. However, many computational models tended not to account for inter-individual response variability due to demographic covariates, such as sex, or physiologic covariates, such as renal function, which may be crucial when predicting TdP. This study aims to compare the effects of drugs in male and female populations with normal and impaired renal function using in silico methods.Methods: Pharmacokinetic models considering sex and renal function as covariates were implemented from data published in pharmacokinetic studies. Drug effects were simulated using an electrophysiologically calibrated population of cellular models of 300 males and 300 females. The population of models was built by modifying the endocardial action potential model published by O'Hara et al. (2011) according to the experimentally measured gene expression levels of 12 ion channels.Results: Fifteen pharmacokinetic models for CiPA drugs were implemented and validated in this study. Eight pharmacokinetic models included the effect of renal function and four the effect of sex. The mean difference in action potential duration (APD) between male and female populations was 24.9 ms (p<0.05). Our simulations indicated that women with impaired renal function were particularly susceptible to drug-induced arrhythmias, whereas healthy men were less prone to TdP. Differences between patient groups were more pronounced for high TdP-risk drugs. The proposed in silico tool also revealed that individuals with impaired renal function, electro-physiologically simulated with hyperkalemia (extracellular potassium concentration [K+](o) = 7 mM) exhibited less pronounced APD prolongation than individuals with normal potassium levels. The pharmacokinetic/electrophysiological framework was used to determine the maximum safe dose of dofetilide in different patient groups. As a proof of concept, 3D simulations were also run for dofetilide obtaining QT prolongation in accor-dance with previously reported clinical values.Conclusions: This study presents a novel methodology that combines pharmacokinetic and electrophysiological models to incorporate the effects of sex and renal function into in silico drug simulations and highlights their impact on TdP-risk assessment. Furthermore, it may also help inform maximum dose regimens that ensure TdP-related safety in a specific sub-population of patients., This project received funding from the European Union's Horizon 2020 Research and Innovation Program under grant agreement No. 101016496 (SimCardioTest) . This work was also partially supported by the Direccion General de Politica Cientifica de la Generalitat Valenciana (PROMETEO/2020/043) . The authors also thankfully acknowledge the computer resources at MareNostrum and the technical support provided by Barcelona Supercomputing Center (IM-2021-1-0001, IM-2021-1-0003, IM-2022-1-0002, IM-2023-1-0002) . JL is being funded by the Ministerio de Ciencia, Innovacion y Universidades for the Formacion de Profesorado Universitario (grant reference: FPU18/01659) . Funding for open access charge: Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Recycled versus non-recycled insulation alternatives: LCA analysis for different climatic conditions in Spain

  • Ata-Ali, N.
  • Penadés-Plà, V.
  • Martínez-Muñoz, D.|||0000-0002-6906-3830
  • Yepes, V.|||0000-0001-5488-6001
[EN] The construction sector represents more than 40% of energy consumption in the European Union, as well as one of the biggest causes of environmental impact. Therefore, this sector needs a great deal of intervention through policies that promote the energetic efficiency of the buildings. One of the most important structural components to reach this energetic efficiency is the facades. In this work, the facade ventilated is chosen due to its better thermal insulation behaviour. The environmental impact of the facade ventilated depends on the thermal insulation material. The goal of this paper is to evaluate the environmental impact of different ventilated facades according to their thermal insulation behavior. For this purpose, the life-cycle assessment is applied in ventilated facades with different materials in different locations. The materials studied are the rock wool, the natural cork and the recycled cork, and the locations considered are the different climatic areas of Spain. To reach a complete environmental assessment all the ventilated facades life-cycle is considered, from cradle to grave. To do this we use the Open LCA software with the Ecoinvent database with the ReCiPe method. The results show that the recycled cork is the thermal insulation with the lowest environmental impact regardless the location., The authors acknowledge the financial support of the Spanish Ministry of Economy and Business (Project: BIA2017-85098-R) and the Spanish Ministry of Science and Innovation (Project: PID2020-117056RB-I00), along with FEDER funding. In addition would also acknowledge the Spanish Ministry of Science, Innovation and Universities for David Martinez-Munoz University Teacher Training Grant (FPU-18/01592).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Methodological analysis of variable geometry turbine technology impact on the performance of highly downsized spark-ignition engines

  • Serrano, J.R.|||0000-0003-0692-3917
  • Piqueras, P.|||0000-0002-3767-0839
  • De La Morena, Joaquín|||0000-0003-0208-508X
  • Gómez-Vilanova, Alejandro|||0000-0002-6627-7075
  • Guilain, Stephane
[EN] New generation of spark ignition (SI) engines are expected to represent most of the future market share in a context of powertrain hybridization. Nevertheless, the current technology has still critical challenges in front to meet incoming CO2 and pollutant emissions standards, so new technologies are emerging to improve engine efficiency. In parallel to combustion concepts, a key required trend is downsizing based on high engine boosting. New turbocharger technologies, such as variable geometry turbines (VGT), become suitable for its application under the demanding operating conditions of SI engines. In this work, a methodology for the analysis of the VGT usage in comparison with traditional waste-gate (WG) turbine is presented. From experimental data obtained in engine test cell, a theoretical analysis aimed at ensuring full control on turbine boundary conditions, such as combustion variability, compressor map or engine calibration, was conducted. Taking advantage of highly validated and physically representative 1-D gas-dynamics and turbocharger models, the engine performance is discussed as a function of the turbine technology at full and partial load in a wide range of engine speed at the same time as the altitude impact is addressed. In all, it was found that VGT technology shows less limitations in extreme working conditions, such as low- and high-end torque regions, where the WG technology represents a limitation in terms of the maximum power output. Full load differences become more even more evident in altitude working conditions. When it comes to partial loads, differences in fuel consumption are minor, but potentially beneficial for VGTs., Alejandro Gomez Vilanova is partially supported through contract: Ayuda de Formacion de Profesorado Universitario (FPU18/04811). The authors wish to thank Vicente Esteve Ferrer for his invaluable work during the experimental campaign.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Muscle-Targeted Robotic Assistive Control Using Musculoskeletal Model of the Lower Limb

  • Escarabajal, Rafael J.
  • Zamora-Ortiz, Pau
  • Pulloquinga, José L.
  • Vallés Miquel, Marina|||0000-0002-6396-0098
  • Valera Fernández, Ángel|||0000-0001-6843-6394
[EN] Conventional assistive and rehabilitative robotic systems often overlook human biomechanics, particularly muscular forces, as they predominantly operate in joint or task space and focus on position and exchanged forces. Similarly, traditional manual rehabilitation techniques employed by physiotherapists struggle to obtain quantitative measurements and make precise modifications to key human variables, resulting in predominantly qualitative methods and outcomes. In response to these limitations, this article introduces an innovative assistive robot controller that operates in the muscular space, targeting specific muscles in the lower limb, and distinguishing itself from existing solutions that focus primarily on joint or task space. A key innovation of our approach is the real-time measurement of muscular forces during dynamic tasks, obtained from a calibrated musculoskeletal model. These measurements enable the establishment of a multistep closed-loop controller, with the outer loop precisely tracking the desired muscular forces. Implemented within a configurable viscous environment, the controller provides a natural response for the user. Experimental evaluations conducted using a parallel robot designed for rehabilitation demonstrate the controller¿s efficacy. Incorporating the outer loop reduced the median relative error of the tracked muscular force by nearly 80% and decreased the variability of this error by over 85% compared to a pure viscous environment defined as the baseline. These findings highlight the potential applications of this control framework in areas, such as assistive robotics and precision rehabilitation. By achieving objective measurement and control, the system may enhance rehabilitation outcomes, offering tailored exercises that match the individual needs, capabilities, and engagement of each patient., This work was supported in part by the Agencia Estatal de Investigacion (Ministerio de Ciencia e Innovacion, Spanish Government)/Fondos FEDER under Project PID2021-125694OB-I00; in part by the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital (Generalitat Valenciana) under Project CIAICO/2023/074; and in part by the Ministerio de Universidades, Spanish Government, under Grant FPU18/05105.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Water Stress-Tolerant Pepper Rootstock Improves the Behavior of Pepper Plants under Deficit Irrigation through Root Biomass Distribution and Physiological Adaptation

  • Gisbert-Mullor, Ramón|||0000-0002-6491-9038
  • Pascual-Seva, Nuria|||0000-0002-6920-5886
  • Pascual España, Bernardo|||0000-0003-1827-925X
  • López Galarza, Salvador Vicente|||0000-0001-6910-253X
  • Martín-García, Rodrigo
  • Bazon Zidaric, Iva
  • Padilla, Yaiza Gara
  • Calatayud, Ángeles
[EN] The use of rootstocks tolerant to water stress in pepper crops is a complementary technique for saving irrigation water without affecting yields by means of particular rootstock physiological traits, which changes the scion¿s perception stress. The present study aimed to analyze the morphological and physiological adaptation of the `Cuerno¿ pepper cultivar grafted onto tolerant rootstock NIBER® subjected to capacitance sensor-based deficit irrigation. The stomatal conductance, relative water content and leaf water potential parameters were used to confirm the degree of crop stress. Leaf dry weight and root volume were higher in the grafted plants under the control irrigation and stress treatment conditions. Total fresh root biomass and root volume percentage of grafted plants under water stress were 24% and 33% higher, respectively, than the ungrafted plants. The grafted plants subjected to both water stress and control conditions had a higher marketable production than the ungrafted plants. The higher yields obtained using tolerant rootstocks were explained by the reduced blossom-end rot incidence., This work was financed by Grant PID2020-118824RR-C2 funded by MCIN/AEI/10.13039/ 501100011033. Ramón Gisbert-Mullor is a beneficiary of a doctoral fellowship (FPU-MEFP (Spain)). Yaiza Gara Padilla is a beneficiary of grant PRE2018-086374 funded by MCIN/AEI/10.13039/ 501100011033 and, as appropriate, by ESF Investing in your future . Funding for open access charge: Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of high-strength SCC with and without steel fibres on the shear behaviour of dry joints in PCSBs

  • Traver-Abella, Celia
  • Bonet Senach, José Luís|||0000-0002-6687-5307
  • Miguel Sosa, Pedro|||0000-0001-5395-8149
  • Albiol Ibáñez, José Ramón|||0000-0003-3049-9693
[EN] The structural behaviour of precast concrete segmental bridges (PCSBs) heavily relies on the strength of the joints between segments. Multi-keyed dry joints are currently the most commonly used solution in these discontinuity zones. Employing high-strength concrete is becoming increasingly common in civil engineering given its higher strength and improved durability. It specifically allows higher prestressing levels in PCSBs. Using self-compacting concrete enhances workability and adding steel fibres improves mechanical properties. The existing scientific literature includes experimental tests to analyse the shear behaviour of castellated dry joints in different concrete types. However, no experimental tests appear specifically for the castellated dry joints made with high-strength self-compacting concrete (HS-SCC) with and without steel fibres. Therefore, this experimental study conducted 31 push-off-type tests to analyse the behaviour and shear capacity of dry joints made of HS-SCC by investigating the influence of adding steel fibres to the concrete mix. The study examined crack patterns, load-displacement behaviour, failure modes and different (cracking, ultimate and residual) loads. The addition of steel fibres improved joints¿ shear capacity. However, brittle behaviour was observed after reaching ultimate load when using HS-SCC, even when steel fibres were added to the concrete mix. Finally, the adequacy of existing formulations was analysed. Standard AASHTO proved to be on the unsafe side for the castellated dry joints specimens made of HS-SCC without steel fibres, and provided a good approximation for the specimens with steel fibres., The authors thank the financial support provided by Grants: PID2021-126397OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe"; RTI2018-099091-B-C21-AR by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" and TED2021-129358B-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR". The authors also thank the Spanish Ministry of Universities for Grant FPU18/03310, which supported Celia Traver Abella. This research was undertaken at the Concrete Science and Technology University Institute (ICITECH) of the Universitat Politecnica de Valencia (UPV; Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence study of rail geometry and track properties on railway rolling noise

  • Andrés-Ruiz, Víctor Tomás
  • Thompson, D. J.
  • Martínez Casas, José|||0000-0001-5706-4951
  • F. D. Denia|||0000-0003-4536-8610
[EN] Wheel/rail interaction generates an excitation due to the roughness present on the surface of both components that produces vibration and consequently rolling noise. In this work, the railway track properties that most influence rolling noise are identified and this influence is analysed to reduce noise emission. The acoustic calculation methodology consists of characterizing the wheel using finite element techniques and the track using periodic structure theory. The influence of the track properties on the sound radiation is analysed by means of statistical techniques applied to the acoustic power results of different track configurations. To achieve this, the rail cross-section geometry is parameterized and numerous simulations are carried out by modifying these geometric parameters and the viscoelastic properties of the track components. Considering the contribution of the wheel, rail and sleeper, the results obtained indicate that the total radiation can be reduced by up to 7.4 dB(A) through an optimal combination of the track design parameters, compared to the worst combination found. In particular, the rail pad stiffness is shown to be the most influential parameter in the sound radiation., This paper is part of the project PID2020-112886RA-I00, grant FPU18/03999 and grant EST21/00213 funded by MCIN/AEI/10.13039/501100011033 as well as by "ESF Investing in your future". The authors also acknowledge Programa PROMETEO/2021/046 of Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Imitation Learning-Based System for the Execution of Self-Paced Robotic-Assisted Passive Rehabilitation Exercises

  • Escarabajal-Sánchez, Rafael José
  • Pulloquinga-Zapata, José
  • Zamora-Ortiz, Pau
  • Valera Fernández, Ángel|||0000-0001-6843-6394
  • Mata Amela, Vicente|||0000-0003-2255-0567
  • Vallés Miquel, Marina|||0000-0002-6396-0098
[EN] The development of robotic-assisted rehabilitation exercises involving physical human-robot interaction requires extreme care since an injured limb may be in physical contact with the robot, so compliant behavior is imperative for these tasks. Typical approaches involve force control schemes like admittance controllers that allow humans to adapt the motion. However, when the patient¿s limb has limited mobility or is potentially injured, unintentional forces may occur during the robot¿s trajectory that could be incompatible with these controllers. This letter addresses a new way of generating compliant trajectories for passive rehabilitation exercises, considering that previous positions of the trajectory are attainable for the patient, so reversing the trajectory is a safe op eration. Since there is no clear way to optimize such a goal due to the physiological variability among patients, the condition of reversal is based on imitation learning by taking the analogous healthy limb of the patient as a reference and encoding the forces using Gaussian Mixture Regression, and reversibility is accomplished by means of Reversible Dynamic Movement Primitives. The system allows for self-paced rehabilitation exercises by back-and-forth movements along the trajectory according to the patient¿s reaction, and it has been successfully applied to a 4-DOF parallel robot for lower-limb rehabilitation., This work was supported in part by the Fondo Europeo de Desarrollo Regional under Grant PID2021-125694OB-I00, in part by the Vicerrectorado de Investigación de la Universitat Politècnica de València under Grant PAID-11-21, and in part by the Ministerio de Universidades, Gobierno de España under Grant FPU18/05105
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A tomato MAGIC population reveals candidate genes for leaf dry matter and phenolics, two key traits for stress resilience and climate-smart breeding

  • Villanueva-Párraga, Gloria|||0000-0002-1475-2882
  • Adalid-Martinez, Ana Maria|||0000-0002-3927-1348
  • Arrones-Olmo, Andrea|||0000-0003-3926-0291
  • Antar, Oussama|||0009-0004-7224-6752
  • Solana-Garcia, Andrea|||0000-0002-1071-7625
  • Vilanova Navarro, Santiago|||0000-0003-4939-9713
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • Gramazio, Pietro|||0000-0003-2226-7999
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Pereira-Dias, Leandro|||0000-0002-6246-0294
  • Kleftogianni, Konstantina
  • Bebeli, Penelope J.
  • Papasotiropoulos, Vasileios
[EN] Increasing leaf dry matter and phenolic content in tomato has the potential to enhance plant resilience, a key requirement for food security and sustainable agriculture in the context of climate change. However, phenolics accumulation in vegetative tissues remains understudied, as does dry matter accumulation. To address this gap, we leveraged 293 recombinant lines of an eight-way Tomato Multi-Parent Advanced Generation Inter-Cross (ToMAGIC) population to identify candidate genes for leaf dry matter and phenolic content. We found significant variation among lines. Leaf dry matter ranged from 6.90 to 23.20% (CV = 24.84%). Substantial variation was also observed for specialized phenolic metabolites, showing larger differences among lines compared with dry matter. Chlorogenic acid, the most abundant phenolic, ranged from 0.18 to 6.77 g kg-& sup1; FW (CV = 76.1%), followed by rutin (0.026-0.352 g kg-& sup1; FW, CV = 45.1%), quercetin (0.008-0.141 g kg-& sup1; FW, CV = 49.9%), and kaempferol (0.003-0.032 g kg-& sup1; FW, CV = 48.8%). Total phenolic content averaged 3.65 g kg-& sup1; FW, with nearly a 20-fold range (0.47-8.36 g kg-& sup1; FW) (CV = 45.3%). The emergence of highly divergent phenotypes suggests extensive recombination in the population. Traits were highly correlated with each other, with rho ranging from 0.35 to 0.77, supporting the possibility of indirect selection and suggesting common genetic regulation. Likewise, genomic heritability estimates were moderate to low, where chlorogenic acid presented the highest value (H2 = 0.66) and kaempferol the lowest (H2 = 0.07). GWAS identified 6 significant associations, explaining 4.50% to 28.24% of the phenotypic variation which, upon further study, enabled the prioritization of candidate genes potentially involved in the control of leaf dry matter and chlorogenic acid content. These findings demonstrate the potential of the ToMAGIC population to facilitate the development of climate-smart tomatoes with improved resilience and reduced input requirements., The author(s) declared that financial support was received for this work and/or its publication. This work was funded by a grant under the program "Ayuda a Primeros Proyectos de Investigacion" (PAID-06-22) from the Vicerrectorado de Investigacion of the Universitat Politecnica de Valencia (UPV), by MAGICPIMPCERAS (PID2020-118627RB-I00), funded by MICIU/AEI/10.13039/501100011033, by CIPROM/2021/020, funded by Conselleria d'Innovacio, Universitats, Ciencia i Societat Digital of the Generalitat Valenciana, and by the HARNESSTOM innovation action (grant agreement no. 101000716), funded by the European Commission H2020 Research and Innovation Programme. L.P.-D. is grateful to the Spanish Ministerio de Universidades for a Margarita Salas postdoctoral grant funded by the European Union NextGenerationEU plan. A.A. is grateful to Spanish Ministerio de Ciencia, Innovacion y Universidades for a predoctoral (FPU18/01742) contract. A.S. is grateful to Spanish Ministerio de Ciencia e Innovacion for a predoctoral grant (PRE2022-102368) funded by MCIN/AEI/10.13039/501100011033 and FSE +. O.A. is grateful to Conselleria d'Innovacio, Ciencia i Societat Digital of the Generalitat Valenciana for a pre-doctoral grant within the Santiago Grisolia program (CIGRIS/2022/113). P.G. is grateful to Spanish Ministerio de Ciencia e Innovacion for a post-doctoral grant (RYC2021-031999-I) funded by MCIN/AEI/10.13039/501100011033 and the European Union through NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

New insights into short-term water stress tolerance through transcriptomic and metabolomic analyses on pepper roots

  • Padilla-Herrero, Yaiza Gara
  • Zhang, Leilei
  • Lucini,Luigi
  • Calatayud-Chover, Ángeles
  • Gisbert-Mullor, Ramón|||0000-0002-6491-9038
  • Bueso Rodenas, Eduardo|||0000-0002-0828-121X
  • Forment Millet, José Javier|||0000-0002-1872-4061
  • López Galarza, Salvador Vicente|||0000-0001-6910-253X
[EN] In the current climate change scenario, water stress is a serious threat to limit crop growth and yields. It is necessary to develop tolerant plants that cope with water stress and, for this purpose, tolerance mechanisms should be studied. NIBER® is a proven water stress- and salt-tolerant pepper hybrid rootstock (Gisbert-Mullor et al., 2020; López-Serrano et al., 2020), but tolerance mechanisms remain unclear. In this experiment, NIBER® and A10 (a sensitive pepper accession (Penella et al., 2014)) response to short-term water stress at 5 h and 24 h was studied in terms of gene expression and metabolites content in roots. GO terms and gene expression analyses evidenced constitutive differences in the transcriptomic profile of NIBER® and A10, associated with detoxification systems of reactive oxygen species (ROS). Upon water stress, transcription factors like DREBs and MYC are upregulated and the levels of auxins, abscisic acid and jasmonic acid are increased in NIBER®. NIBER® tolerance mechanisms involve an increase in osmoprotectant sugars (i.e., trehalose, raffinose) and in antioxidants (spermidine), but lower contents of oxidized glutathione compared to A10, which indicates less oxidative damage. Moreover, the gene expression for aquaporins and chaperones is enhanced. These results show the main NIBER® strategies to overcome water stress., This work has been financed by Grant PID2020-118824RR-C21 funded by MCIN/AEI/10.13039/501100011033 and Grant PAID -11-21 funded by the Vicerrectorado de Investigaci ' on de la Universidad Polite ' cnica de Valencia. Ram ' on Gisbert-Mullor is a beneficiary of a doctoral fellowship (FPU-MEFP (Spain) ) . Yaiza Gara Padilla is a bene- ficiary of grant PRE2018-086374, funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by "ESF Investing in your future".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of the fire resistance of timber jack arch flooring systems used in historical buildings

  • Garcia-Castillo, Ester
  • Paya-Zaforteza, Ignacio
  • Hospitaler Pérez, Antonio|||0000-0001-7108-3104
[EN] Conservation of built heritage, at present, is a major task and a great challenge because it requires adapting the performance of existing buildings to current code requirements, when very often these were built before codes existed. Timber jack arch flooring systems can be found in many historical buildings around the world. The system is formed by timber joists and brick vaults spanning the distance between two adjacent joists and has an undoubtable aesthetic and cultural value. However, given its geometry, there is no methodology to verify its fire resistance, which has prevented the preservation of many buildings using this system. Within this context, this paper proposes a methodology based on the ¿Reduced cross-section method¿ included in Eurocode 5 (EN 1995-1-2) for the determination of the fire resistance of historical timber jack arch flooring systems subjected to different fire exposures. The methodology is based on the use of the 135-degree and the 300-degree isotherms to obtain the positions of the zero-strength layer and the charring depths, and is supported by both advanced numerical thermal models experimentally validated for standard fire exposure and advanced mechanical models. The methodology has been applied to a wide number of flooring systems covering different span lengths, timber static bending strengths, and fire exposures to evaluate the influence of these parameters on fire resistance. Results show that historical buildings do not always meet the requirements set by current codes and, therefore, performing these analyses is essential to ensure the fire resistance of these timber structures. By doing so, this work also contributes to cultural heritage conservation and to more sustainable construction in alignment with the fulfilment of United Nations 2030 Agenda¿s eleventh goal: "Sustainable cities and communities"., The authors wish to express their gratitude to the Spanish Ministry of Economy, Industry and Competitiveness for the funding provided through Project BIA 2014-59036R. This research is also supported by the Spanish Ministry of Science, Innovation and Universities through the PhD grant FPU18/00726 awarded to the first author. Finally, the au-thors want to thank Prof. Dr. Juan Patricio Hidalgo for his help and MSc Enrique Serra for his assistance in the experimental test.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Combined Admittance Control With Type II Singularity Evasion for Parallel Robots Using Dynamic Movement Primitives

  • Escarabajal-Sánchez, Rafael José
  • Pulloquinga-Zapata, José
  • Castillo-García, Fernando J.
  • Valera Fernández, Ángel|||0000-0001-6843-6394
  • Mata Amela, Vicente|||0000-0003-2255-0567
  • Vallés Miquel, Marina|||0000-0002-6396-0098
[EN] This article addresses a new way of generating compliant trajectories for control using movement primitives to allow physical human-robot interaction where parallel robots (PRs) are involved. PRs are suitable for tasks requiring precision and performance because of their robust behavior. However, two fundamental issues must be resolved to ensure safe operation: first, the force exerted on the human must be controlled and limited, and second, Type II singularities should be avoided to keep complete control of the robot. We offer a unified solution under the dynamic movement primitives (DMP) framework to tackle both tasks simultaneously. DMPs are used to get an abstract representation for movement generation and are involved in broad areas, such as imitation learning and movement recognition. For force control, we design an admittance controller intrinsically defined within the DMP structure, and subsequently, the Type II singularity evasion layer is added to the system. Both the admittance controller and the evader exploit the dynamic behavior of the DMP and its properties related to invariance and temporal coupling, and the whole system is deployed in a real PR meant for knee rehabilitation. The results show the capability of the system to perform safe rehabilitation exercises., This work was supported in part by the Fondo Europeo de Desarrollo Regional under Grant PID2021-125694OB-I00, in part by the Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia under Grant PAID-11-21, and in part by the Ministerio de Universidades, Gobierno de Espana under Grant FPU18/05105.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Uncertainty assessment of proarrhythmia predictions derived from multi-level in silico models

  • Kopanska, Karolina
  • Rodriguez-Belenguer, Pablo
  • Llopis-Lorente, Jordi
  • Pastor, Manuel
  • Trenor Gomis, Beatriz Ana|||0000-0001-9166-6112
  • Saiz Rodríguez, Francisco Javier|||0000-0002-9850-0825
[EN] In silico methods can be used for an early assessment of arrhythmogenic properties of drug candidates. However, their use for decision-making is conditioned by the possibility to estimate the predictions' uncertainty. This work describes our efforts to develop uncertainty quantification methods for the predictions produced by multi-level proarrhythmia models. In silico models used in this field usually start with experimental or predicted IC50 values that describe drug-induced ion channel blockade. Using such inputs, an electrophysiological model computes how the ion channel inhibition, exerted by a drug in a certain concentration, translates to an altered shape and duration of the action potential in cardiac cells, which can be represented as arrhythmogenic risk biomarkers such as the APD(90). Using this framework, we identify the main sources of aleatory and epistemic uncertainties and propose a method based on probabilistic simulations that replaces single-point estimates predicted using multiple input values, including the IC(50)s and the electrophysiological parameters, by distributions of values. Two selected variability types associated with these inputs are then propagated through the multi-level model to estimate their impact on the uncertainty levels in the output, expressed by means of intervals. The proposed approach yields single predictions of arrhythmogenic risk biomarkers together with value intervals, providing a more comprehensive and realistic description of drug effects on a human population. The methodology was tested by predicting arrhythmogenic biomarkers on a series of twelve well-characterised marketed drugs, belonging to different arrhythmogenic risk classes., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. The authors received funding from the eTRANSAFE project, Innovative Medicines Initiative 2 Joint Undertaking under Grant Agreement No. 777365, supported from European Union s Horizon 2020 and the EFPIA. Authors declare that this work refects only the author s view, and that IMI-JU is not responsible for any use that may be made of the information it contains. Also, this project received funding from the European Union s Horizon 2020 Research and Innovation programme under Grant Agreement No. 964537 (RISK-HUNT3R), which is part of the ASPIS cluster. We also received funding from the SimCardioTest supported by European Union s Horizon 2020 research and innovation programme under Grant Agreement No. 101016496. J.L.L. is being funded by the Ministerio de Ciencia, Innovacion y Universidades for the Formacion de Profesorado Universitario (Grant Reference: FPU18/01659). The work was also partially support by the Dirección General de Política Científca de la Generalitat Valenciana (PROMETEO/2020/043).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Application of Machine Learning to improve the efficiency of electrophysiological simulations used for the prediction of drug-induced ventricular arrhythmia

  • Rodriguez-Belenguer, Pablo
  • Kopanska, Karolina
  • Llopis-Lorente, Jordi
  • Pastor, Manuel
  • Trenor Gomis, Beatriz Ana|||0000-0001-9166-6112
  • Saiz Rodríguez, Francisco Javier|||0000-0002-9850-0825
[EN] Background and Objective In silico prediction of drug-induced ventricular arrhythmia often requires computationally intensive simulations, making its application tedious and non-interactive. This inconvenience can be mitigated using matrices of precomputed simulation results, allowing instantaneous computation of biomarkers such as action potential duration at 90% of the repolarisation (APD90). However, preparing such matrices can be computationally intensive for the method developers, limiting the range of simulated conditions. In this work, we aim to optimise the generation of these matrices so that they can be obtained with less effort and for a broader range of input values. Methods Machine learning methods were applied, building models trained with only a small fraction of the originally simulated results. The predictive performances of the models were assessed by comparing their predicted values with the actual simulation results, using percentual mean absolute error and mean relative error, as well as the percentage of data with a relative error below 5%. Results Our method obtained highly accurate estimations of the original values, leading to a nearly one hundred-fold decrease in computation time. This method also allows precomputing more complex matrices, describing the effect of more ion channels on the APD90. The best results were obtained by applying Support Vector Machine models, which yielded errors below 1% in most cases. This approach was further validated by predicting the APD90 of a set of 12 CiPA compounds and exporting the optimal settings for predicting APD90 using a different set of ion channels, always with satisfactory results. Conclusions The proposed method effectively reduces the computational effort required to generate matrices of precomputed electrophysiological simulation values. The same approach can be applied in other fields where computationally costly simulations are applied repeatedly using slightly different input values., The authors received funding from the eTRANSAFE project, Innovative Medicines Initiative 2 Joint Undertaking under grant agreement No 777365, supported from European Union's Horizon 2020 and the EFPIA. We also received funding from the SimCardioTest supported by European Union¿s Horizon 2020 research and innovation programme under grant agreement No 101016496. J.L.L. is being funded by the Ministerio de Ciencia, Innovacion y Universidades for the Formacion de Profesorado Universitario (Grant Reference: FPU18/01659). The work was also partially support by the Dirección General de Política Científica de la Generalitat Valenciana (PROMETEO/ 2020/043).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Metal-Free Diastereo- and Enantioselective Dearomative Formal [3+2] Cycloaddition of 2-Nitrobenzofurans and Isocyanoacetate Esters

  • Laviós, Adrian
  • Sanz-Marco, Amparo
  • Vila, Carlos
  • Pedro, José R.
  • Blay, Gonzalo
  • Muñoz Roca, María Del Carmen|||0000-0003-2630-3897
[EN] The diastereo- and enantioselective dearomative formal [3 + 2] cycloaddition of 2-nitrobenzofurans and alpha-aryl-alpha isocyanoacetate esters provides tricyclic compounds bearing the 3a,8b-dihydro-1H-benzofuro[2,3-c]pyrrole framework with three consecutive stereogenic centers. The reaction was enabled by a cupreine-ether organocatalyst. The reaction products were obtained with almost full diastereoselectivity and with excellent enantiomeric excesses for a number of substituted 2-nitrobenzofurans and isocyanoacetates., We acknowledge grant PID2020-116944GB-100 funded by MCIN/AEI/10.13039/501100011033 and by the "European Union Next Generation EU/PRTR", grant RyC-2016-20187 funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future" to C.V., and grant FPU18/03038 funded by MEC to A.L. We acknowledge access to the NMR, MS, and X-ray facilities from the Servei Central de Suport a la Investigacio Experimental (SCSIE)-UV. Dedicated to Professor Joan Bosch, Universitat de Barcelona, on the occasion of his 75th birthday.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Model-Based Control of a 4-DOF Rehabilitation Parallel Robot with Online Identification of the Gravitational Term

  • Escarabajal-Sánchez, Rafael José
  • Pulloquinga-Zapata, José Luis
  • Díaz-Rodríguez, Miguel
  • Mata Amela, Vicente|||0000-0003-2255-0567
  • Valera Fernández, Ángel|||0000-0001-6843-6394
[EN] Parallel robots are being increasingly used as a fundamental component of lower-limb rehabilitation systems. During rehabilitation therapies, the parallel robot must interact with the patient, which raises several challenges to the control system: (1) The weight supported by the robot can vary from patient to patient, and even for the same patient, making standard model-based controllers unsuitable for those tasks since they rely on constant dynamic models and parameters. (2) The identification techniques usually consider the estimation of all dynamic parameters, bringing about challenges concerning robustness and complexity. This paper proposes the design and experimental validation of a model-based controller comprising a proportional-derivative controller with gravity compensation applied to a 4-DOF parallel robot for knee rehabilitation, where the gravitational forces are expressed in terms of relevant dynamic parameters. The identification of such parameters is possible by means of least squares methods. The proposed controller has been experimentally validated, holding the error stable following significant payload changes in terms of the weight of the patient¿s leg. This novel controller allows us to perform both identification and control simultaneously and is easy to tune. Moreover, its parameters have an intuitive interpretation, contrary to a conventional adaptive controller. The performance of a conventional adaptive controller and the proposed one are compared experimentally., This research was partially funded by Fondo Europeo de Desarrollo Regional (PID2021-125694OB-I00), cofounded by Vicerrectorado de Investigación de la Universitat Politècnica de València (PAID-11-21) and by Ministerio de Universidades, Gobierno de España (FPU18/05105).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nanoparticle-Mediated Tumor Microenvironment Remodeling Favors the Communication with the Immune Cells for Tumor Killing

  • Lucena-Sánchez, Elena
  • Hicke-García, Francisco Javier|||0000-0002-8419-0467
  • Clara-Trujillo, Sandra|||0000-0002-6455-2993
  • García-Fernández, Alba|||0000-0002-8416-1674
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
[EN] Melanoma is one of the most common types of skin cancer with a bad prognosis and limited treatment options in advanced stages. Immunotherapy has changed the landscape of oncology. Cancer cells can activate various mechanisms to suppress immune responses, such as the immunological checkpoint programmed cell death-1 (PD-1)/programmed cell death-ligand 1 (PD-L1), whose blockage reactivates immune killing of melanoma cells. Moreover, exposure to inhibitory cytokines such as transforming growth factor-beta (TGF-¿) induces T regulatory cell differentiation, which promotes cancer immunosuppression. These advances provided exciting outcomes in the clinical treatment of melanoma, however, there are still limitations, and a combination of several treatments is usually needed. Based on the above, inhibition of the TGF-¿ production and the PD-1/PD-L1 checkpoint may be a feasible strategy to increase T cell infiltration and cytotoxicity and thus overcome tumor immune escape. Here, mesoporous silica nanoparticles loaded with a PD-L1 inhibitor (JQ1, a thienotriazolodiazepine and a potent bromodomain family inhibitor) and capped with polyethyleneimine and a small interfering RNA targeting TGF-¿ are reported. An efficient PD-L1 downregulation and TGF-¿ silencing are achieved using the nanoparticles, along with the promotion of cancer death. This system demonstrates to be a specific and innovative therapeutic approach for the treatment of melanoma., The authors thank the Spanish Government (Project Nos. PID2021-126304OB-C41, (MCUI/FEDER, EU)) and the Generalitat Valenciana (Project No. PROMETEO CIPROM/2021/007). This work was also supported by the CIBER -Consorcio Centro de Investigación Biomédica en Red (Grant No. CB06/01/2012), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovación. E.L.-S. is grateful for her FPU fellowship funded by the MINECO (Grant No. FPU18/06539). F.J.H. thanks MIU for his FPU grant (Grant No. FPU20/06021). Graphical images and schemes were created with BioRender.com.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimal design of steel-concrete composite bridge based on a transfer function discrete swarm intelligence algorithm

  • Martínez-Muñoz, D.|||0000-0002-6906-3830
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Yepes, V.|||0000-0001-5488-6001
  • García, Jose
[EN] Bridge optimization can be complex because of the large number of variables involved in the problem. In this paper, two box-girder steel¿concrete composite bridge single objective optimizations have been carried out considering cost and CO¿ emissions as objective functions. Taking CO¿ emissions as an objective function allows adding sustainable criteria to compare the results with cost. SAMO2, SCA, and Jaya metaheuristics have been applied to reach this goal. Transfer functions have been implemented to fit SCA and Jaya to the discontinuous nature of the bridge optimization problem. Furthermore, a Design of Experiments has been conducted to tune the algorithm and set its parameters. Consequently, it has been observed that SCA shows similar values for objective cost function as SAMO2 but improves computational time by 18% while also getting lower values for the objective function result deviation. From a cost and CO¿ optimization analysis, it has been observed that a reduction of 2.51 kg CO¿ is obtained by each euro reduced using metaheuristic techniques. Moreover, for both optimization objectives, it is observed that adding cells to bridge cross-sections improves not only the section behavior but also the optimization results. Finally, it is observed that the proposed design of double composite action in the supports allows this study to remove continuous longitudinal stiffeners in the bottom flange., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This research has been made possible thanks to funding received from the following research projects: Grant PID2020-117056RB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", Grant FPU-18/01592 funded by MCIN/AEI/10.13039/501100011033 and by "ESF invests in your future" and Grant CONICYT/FONDECYT/INICIACION/11180056.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Suitable rootstocks can alleviate the effects of heat stress on pepper plants

  • Gisbert-Mullor, Ramón|||0000-0002-6491-9038
  • López Galarza, Salvador Vicente|||0000-0001-6910-253X
  • Padilla, Yaiza Gara
  • Martínez-Cuenca, Mary-Rus
  • Calatayud, Ángeles
[EN] In this study, different pepper rootstocks are tested for their ability to overcome heat stress situations. This work aims to evaluate: (i) the physiological mechanisms that occur during long heat stress periods (7 days) under controlled conditions in a pepper variety grafted onto accessions; (ii) the heat stress behaviour of these grafted pepper plants under greenhouse conditions in terms of marketable yields. For this purpose, plants of Lamuyo-type sweet pepper `Herminio F1¿ (VA), grafted onto six accessions (VA/A25, VA/A31, VA/A34, VA/A52, VA/A57, VA/A6), and a self-grafted variety (VA/VA) were grown under controlled conditions in growth chambers (28/24 °C, day/night temperatures and 38/24 °C for control and heat stress, respectively) and under greenhouse conditions (38/24 °C). For the controlled conditions, relative growth rate, leaf area, electrolyte leakage, chlorophyll a fluorescence and heat shock proteins were determined. For the greenhouse conditions, fresh and dry weigh, electrolyte leakage and fruit yield were determined. Our results confirmed that grafting a pepper cultivar onto appropriate rootstocks such as A6, A25 and A57 can overcome the negative effects of heat stress conditions with a higher relative growth rate, leaf area and Fv/Fm, and lower electrolyte leakage under the controlled conditions, and with higher marketable yields under the greenhouse conditions., This work has been financed by the INIA (Spain) and the Spanish Ministry of Science, Innovation and Universities through Project RTA-2017-00030-C02 and the European Regional Development Fund (ERDF) . Ramon Gisbert-Mullor is a beneficiary of a doctoral fellowship (FPU-MEFP (Spain) ) . Yaiza Gara Padilla is a beneficiary of a doctoral fellowship (FPI-INIA (Spain) ) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Calibración ojo a mano de un brazo robótico industrial con cámaras 3D de luz estructurada, Eye-to-hand calibration of an industrial robotic arm with structured light 3D cameras

  • Diaz-Cano, Ignacio
  • Quintana, Fernando M.
  • Galindo, Pedro L.
  • Morgado-Estevez, Arturo
[EN] Computer vision is gaining more and more importance in the world of industrial robotics, since it is necessary to carry out increasingly precise and autonomous tasks, which is why a more exact positioning of the robot is needed. This requires the support of a vision system that is the one that gives the robot precision in its pose, calibrating said system with respect to the robot. This work presents a simple methodology to approach this form of calibration, called hand-eye, using a structured light 3D camera that obtains information from the real world and a six-axis industrial robotic arm. The method uses the RANSAC algorithm for the determination of the planes, which represents a notable reduction in errors, since the coordinates of the points sought come from planes adjusted to thousands of points. This allows the system to always have the ability to obtain a transformation matrix from the coordinates of the camera to the base of the robot. In addition, the proposed method is ideal for making a precision comparison between cameras, due to its simplicity and speed of use. In this study, the resulting error analysis was performed using two dfferent 3D cameras: a basic one (Kinect 360) and an industrial one (Zivid ONE + M)., [ES] La visión artificial está cobrando cada día más auge en el mundo de la robótica industrial, ya que es necesario realizar tareas cada vez más precisas y autónomas, por lo que se necesita un posicionamiento del robot más exacto. Para ello se precisa del apoyo de un sistema de visión que sea el que preste al robot precisión en su pose, calibrando dicho sistema con respecto al robot. Este trabajo presenta una metodología sencilla para abordar esta forma de calibración, llamada ojo a mano, empleando una cámara 3D de luz estructurada que obtiene la información del mundo real y un brazo robótico industrial de seis ejes. Esto permite utilizar el algoritmo RANSAC para la determinación de los planos, cuya intersección nos da las coordenadas de los puntos,lo que supone una reducción notable de los errores, ya que las coordenadas proceden de planos ajustados a miles de puntos, lo cual hace que el sistema sea más robusto y capaz de obtener una matriz de transformación de las coordenadas de la cámara a la base del robot, que le permitirá abordar cualquier tarea que precise con una precisión eficiente. Se ha realizado el análisis de errores resultante utilizando dos cámaras 3D diferentes: una básica (Kinect 360) y otra industrial (Zivid ONE+ M)., Este trabajo ha sido realizado parcialmente gracias al apoyo del Plan Estatal de Investigación Científica y Técnica y de Innovación 2017-2020 (AUROVI) EQC2018-005190-P. Fernando M. Quintana agradece al Ministerio de Ciencia, Innovación y Universidades de España su apoyo a través de la ayuda FPU (FPU18/04321).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of Choked Flow in Variable Nozzle Radial Turbines

  • Tiseira, Andrés-Omar|||0000-0001-9472-2386
  • García-Cuevas González, Luis Miguel|||0000-0001-9340-0617
  • Echavarria-Olaya, Juan David|||0000-0002-9611-0751
  • Inhestern, Lukas Benjamin
[EN] In commonly applied one-dimensional choking models for radial turbines, choked flow is assumed to appear in the geometrical throat of each stator and rotor. Coupled and complex three-dimensional effects are not considered. In order to analyze the internal aerodynamic in a radial turbine at off design conditions and before carrying out experimental tests, which in the case of automotive turbocharger are limited by their compact size, computational fluid dynamics (CFD) simulations stand out as a useful tool. This paper presents the study of a variable geometry turbine (VGT) of a commercial turbocharger at off design conditions reaching choked flow, analyzing the presence of this limiting conditions in the stator and rotor under different operation points and VGT positions. Reynolds-averaged Navier-Stokes (RANS) and unsteady RANS simulation have been performed to obtain the flow structures in stator and rotor. The results reveal that the choked effective area mostly depends on the stator vane position and pressure ratio. For the closed VGT position a standing shock wave appears on the stator suction side and expands through the vaneless space. For the opened VGT position the flow is choked at the rotor outlet. However, the evolution of the choked area highly depends on the rotational speed and the secondary flow. A strong interaction with the tip leakage vortex has been identified, The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: The work has been partially supported by the "Subprograma de Formacion de Profesorado Universitario (FPU).'' Ministerio de Universidades. FPU18/02628 and by the "FPI Subprograma 2.'' Universitat Polite cnica de Valencia. PAID-10-18.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An end-to-end solution for out-of-hospital emergency medical dispatch triage based on multimodal and continual deep learning

  • Ferri-Borredà, Pablo|||0000-0002-3083-1169
  • Sáez Silvestre, Carlos|||0000-0003-2678-8249
  • Garcia-Gomez, Juan M
  • Félix-De Castro, Antonio
  • Sánchez-Cuesta, Purificación
[EN] The objective of this study was to build a multimodal, multitask predictive model-named E2eDeepEMC2-to improve out-of-hospital emergency incident severity assessments while coping with shifts in data distributions over time. We drew on 2054694 independent incidents recorded by the Valencian emergency medical dispatch service between 2009 and 2019 (excluding 2013), combining demographic, temporal, clinical and free-text inputs. To handle temporal drift, our model integrates continual learning strategies and comprises three encoder modules (for context, clinical data and text), whose outputs are merged to predict the life-threatening level, admissible response delay and emergency system jurisdiction. Compared with the Valencian Region's existing in-house triage protocol, E2eDeepEMC2 achieved absolute F1-score gains of 18.46% for life-threatening level, 25.96% for response delay and 3.63% for jurisdiction. Compared to non-continual learning baselines, it also outperformed them by 3.04%, 9.66% and 0.58%, respectively. Deployment of E2eDeepEMC2 is currently underway in the Valencian Region, underscoring its practical impact on real-world emergency dispatch decision-making., This work has received support from the Ministry of Science, Innovation, and Universities of Spain through the FPU18/06441 program and the KINEMAI project (PID2022-138636OA-I00) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Machine learning based digital twins on vehicle transient cycles and their potential for predicting fuel consumption

  • Tomanik, Eduardo
  • Jiménez-Reyes, Antonio José
  • Tomanik, Victor
  • Tormos, B.|||0000-0002-8852-3783
[EN] Transient car emission tests generate huge amount of test data, but their results are usually evaluated only using their "accumulated" cycle values according to the homologation limits. In this work, two machine learning models were developed and applied to a truck RDE test and two light-duty vehicle chassis emission tests. Different from the conventional approach, the engine parameters and fuel consumption were acquired from the Engine Control Unit, not from the test measurement equipment. Instantaneous engine values were used as input in machine-learning-based digital twins. This novel approach allows for much less costly vehicle tests and optimizations. The paper¿s novel approach and developed digital twins model were able to predict both instantaneous and accumulated fuel consumption with good accuracy, and also for tests cycles different to the one used to train the model., This research was partially funded by the Spanish Ministry of Science, Innovation and Universities for financing the PhD studies of Antonio J. Jimenez-Reyes (grant FPU18/02116).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hybrid Swarm Intelligence Optimization Methods for Low-Embodied Energy Steel-Concrete Composite Bridges

  • Martínez-Muñoz, D.|||0000-0002-6906-3830
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Yepes, V.|||0000-0001-5488-6001
  • García, Jose
[EN] Bridge optimization is a significant challenge, given the huge number of possible configurations of the problem. Embodied energy and cost were taken as objective functions for a box-girder steel¿concrete optimization problem considering both as single-objective. Embodied energy was chosen as a sustainable criterion to compare the results with cost. The stochastic global search TAMO algorithm, the swarm intelligence cuckoo search (CS), and sine cosine algorithms (SCA) were used to achieve this goal. To allow the SCA and SC techniques to solve the discrete bridge optimization problem, the discretization technique applying the k-means clustering technique was used. As a result, SC was found to produce objective energy function values comparable to TAMO while reducing the computation time by 25.79%. In addition, the cost optimization and embodied energy analysis revealed that each euro saved using metaheuristic methodologies decreased the energy consumption for this optimization problem by 0.584 kW·h. Additionally, by including cells in the upper and lower parts of the webs, the behavior of the section was improved, as were the optimization outcomes for the two optimization objectives. This study concludes that double composite action design on supports makes the continuous longitudinal stiffeners in the bottom flange unnecessary., The author gratefully acknowledge the fundings received by: Grant PID2020- 117056RB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ¿ERDF A way of making Europe¿. Grant FPU-18/01592 funded by MCIN/AEI/10.13039/501100011033 and by ¿ESF invests in your future¿ and Grant CONICYT/FONDECYT/INICIACION/11180056
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

MLLP-VRAIN Spanish ASR Systems for the Albayzín-RTVE 2020 Speech-to-Text Challenge: Extension

  • Baquero-Arnal, Pau
  • Iranzo-Sánchez, Javier
  • Pérez-González de Martos, Alejandro Manuel
  • Jorge-Cano, Javier|||0000-0002-9279-6768
  • Giménez Pastor, Adrián
  • Garcés Díaz-Munío, Gonçal|||0000-0002-2594-5858
  • Silvestre Cerdà, Joan Albert|||0000-0003-2291-8296
  • Civera Saiz, Jorge|||0000-0002-0963-0143
  • Sanchis Navarro, José Alberto|||0000-0002-2943-0990
  • Juan, Alfons|||0000-0002-9984-4072
[EN] This paper describes the automatic speech recognition (ASR) systems built by the MLLP-VRAIN research group of Universitat Politècnica de València for the Albayzín-RTVE 2020 Speech-to-Text Challenge, and includes an extension of the work consisting of building and evaluating equivalent systems under the closed data conditions from the 2018 challenge. The primary system (p-streaming_1500ms_nlt) was a hybrid ASR system using streaming one-pass decoding with a context window of 1.5 seconds. This system achieved 16.0% WER on the test-2020 set. We also submitted three contrastive systems. From these, we highlight the system c2-streaming_600ms_t which, following a similar configuration as the primary system with a smaller context window of 0.6 s, scored 16.9% WER points on the same test set, with a measured empirical latency of 0.81 ± 0.09 s (mean ± stdev). That is, we obtained state-of-the-art latencies for high-quality automatic live captioning with a small WER degradation of 6% relative. As an extension, the equivalent closed-condition systems obtained 23.3% WER and 23.5% WER, respectively. When evaluated with an unconstrained language model, we obtained 19.9% WER and 20.4% WER; i.e., not far behind the top-performing systems with only 5% of the full acoustic data and with the extra ability of being streaming-capable. Indeed, all of these streaming systems could be put into production environments for automatic captioning of live media streams., The research leading to these results has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreements no. 761758 (X5Gon) and 952215 (TAILOR), and Erasmus+ Education programme under grant agreement no. 20-226-093604-SCH (EXPERT); the Government of Spain's grant RTI2018-094879-B-I00 (Multisub) funded by MCIN/AEI/10.13039/501100011033 & "ERDF A way of making Europe", and FPU scholarships FPU14/03981 and FPU18/04135; the Generalitat Valenciana's research project Classroom Activity Recognition (ref. PROMETEO/2019/111), and predoctoral research scholarship ACIF/2017/055; and the Universitat Politecnica de Valencia's PAID-01-17 R&D support programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microscopic Identification of 24 Timber Samples Obtained from Half-Timber Walls in Northern Spain-Considerations on the Relationship between Species and Constructive Needs

  • Hueto-Escobar, Alicia|||0000-0003-4628-6545
  • Vegas López-Manzanares, Fernando|||0000-0003-0315-6839
  • Mileto, Camilla|||0000-0002-6987-8802
[EN] Traditional architecture characteristically uses locally available materials to develop constructive systems and techniques, providing an optimum response to the needs of the population. This study focuses on half-timber walls as a traditional technique taking material form in a wide range of variants found mostly in the northwest half of Spain. Primarily aiming to ensure the broad objective of in-depth documentation, understanding, and study, the microscopic analysis of 24 timber samples obtained from different half-timber walls is proposed. This analysis aims to identify the species or species groups used and to establish a correlation with different aspects of construction including structural resistance, durability, and workability. This makes it possible to identify the predominant use of species found close to the locations from which the samples are obtained, using relatively resistant species for the structural elements of the half-timber wall, as well as the use of species with flexible and easily malleable branches for the construction of the enclosure panels. This indicates that, among the species available in a given location, builders have a degree of knowledge on the characteristics of the material, so they could choose the most suitable ones or develop specific constructive solutions based on these characteristics., This work is part of the research project "Risk-Terra: La arquitectura de tierra en la Peninsula Iberica: Estudio de los riesgos naturales, sociales y antropicos y estrategias de intervencion e incremento de la resiliencia" (Ref. RTI2018-095302-B-I00; main researchers: Camilla Mileto y Fernando Vegas), funded by the Spanish Ministry of Science, Innovation and University. This research has been developed within a doctoral thesis funded by the Spanish Ministry of Science, Innovation and University (Ref. FPU18/01596).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Railway rolling noise in curved tracks: Dynamic modelling of the wheelset and influence of the curve

  • Andrés-Ruiz, Víctor Tomás
  • Thompson, D. J.
  • Bruni, Stefano
  • Martínez Casas, José|||0000-0001-5706-4951
  • F. D. Denia|||0000-0003-4536-8610
[EN] Railway wheelsets operating on curved tracks experience complex dynamic behaviour which can affect the generation of rolling noise. This paper presents a comprehensive study on the dynamic response of wheelsets on curved tracks and the associated rolling noise radiation from the wheel and track. A dynamic model is developed to accurately compute the vibrational response of the flexible wheelset, considering the inertial effects associated with its rotation and trajectory along the curved track. An axisymmetric approach is proposed, which reduces significantly the computational effort in comparison to a three-dimensional numerical model. Considering a railway vehicle and its interaction with the track, the rolling noise generated in curved conditions is evaluated. Noise radiated as a result of a vehicle running on curves of 300 m and 2 km radius is compared with a tangent track. Differences in the sound radiation are found among the acoustic levels associated with each wheelset, the steady-state position of such wheelsets on the rails being a key factor., This paper is part of the project PID2020-112886RA-I00, project PID2023-148483OB-I00, grant FPU18/03999, and grant EST22/00353 funded by MCIN/AEI/10.13039/501100011033 as well as by "ESF Investing in your future". The authors also acknowledge Programa PROMETEO/2021/046 of Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tools for assessing qualitatively the level of circularity of organisations: Applicability to different sectors

  • Valls-Val, K.|||0000-0002-5738-2789
  • Ibáñez-Forés, Valeria
  • Bovea, María D.
[EN] The transition towards a circular economy (CE) has been identified as one of the biggest challenges for our society in general and for organisations in particular. In this context, organisations have begun to call for methods to measure their level of circularity and therefore, in recent years, various specific CE tools have been developed. The objective of this study is to analyse the applicability, utility and user-friendliness of CE tools that autonomously measure the level of circularity of organisations by using qualitative data. For this purpose, seven qualitative CE tools (CAS2.0, CE-Diagnosis, CircularTRANS, Circulytics, CM-FLAT, INEDIT and MATChE) are selected and applied to four organisations (two belonging to the service sector and two to the production sector). The results show that, due to the absence of uniformity, regularity, and singularity in the CE assessment, the circularity indicators included in each CE tool analysed are different; therefore, the level of circularity calculated for each specific organisation by means of the different CE tools are comparable. Moreover, the CE tools are heterogeneous in terms of content, length and number of questions; and they do not incorporate the specific characteristics of the different sectors of the organisations analysed. Furthermore, after gathering the opinions of managers regarding the applicability of each CE tool to each organisation, it is observed that the existing CE tools can be useful but need further development. For these reasons, further research and development of standardised sectoral CE tools that consider sector specificities and allow organisations to obtain accurate and comparable results is needed., The authors are grateful to the Ministerio de Ciencia, Innovación y Universidades (Spain) (DPI2017-89451-R and FPU18/02816) for the financial support and to the respondents from the organisations for their participation in this study.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Social Impact Assessment Comparison of Composite and Concrete Bridge Alternatives

  • Martínez-Muñoz, D.|||0000-0002-6906-3830
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Yepes, V.|||0000-0001-5488-6001
[EN] The definition of sustainability includes three fundamental pillars: economic, environmental, and social. Studies of the economic impact on civil engineering infrastructures have been focused on cost reduction. It is not necessarily in line with economic sustainability due to the lack of other economic factors. Moreover, the social pillar assessment has been weakly developed compared to the economic and the environmental ones. It is essential to focus on the social pillar and evaluate clear indicators that allow researchers to compare alternatives. Furthermore, bridge life cycle assessment studies have been focused on concrete options. This has resulted in a lack of analysis of the impact of composite bridge alternatives. This study is conducted in two stages. The first part of the study makes a cradle-to-grave social and environmental sustainability evaluation with the SOCA v2 and ecoinvent v3.7.1 databases. This assessment is carried out on four concrete and composite bridge alternatives with span lengths between 15 and 40 m. The social impact weighting method and recipe have been used to obtain the social and environmental indicators. The second part of the study compares the results obtained from the social and environmental assessment of the concrete and the composite alternatives varying the steel recycling rate. The bridge alternatives are prestressed concrete solid slab, prestressed concrete lightened slab, prestressed concrete box-girder, and steel¿concrete composite box-girder. The results show that composite options are the best for environmental impact, but the concrete box girder solutions are better for social impact. Furthermore, an increase in the steel recycling rate increases the social impact and decreases the environmental one., This research was funded by: Grant PID2020-117056RB-I00 funded byMCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe". Grant FPU-18/01592 funded by MCIN/AEI/10.13039/501100011033 and by "ESF invests in your future".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hybrid Endometrial-Derived Hydrogels: Human Organoid Culture Models and In Vivo Perspectives

  • Gómez-Álvarez, María
  • Bueno-Fernandez, Clara
  • Rodríguez-Eguren, Adolfo
  • Francés-Herrero, Emilio
  • Agustina-Hernández, Marcos
  • Faus, Amparo
  • Galán, Amparo
  • Pellicer, Antonio
  • Ferrero, Hortensia
  • Cervelló, Irene
  • Gisbert-Roca, Fernando|||0000-0003-3937-5822
  • Martínez-Ramos, Cristina|||0000-0002-6540-4714
[EN] The endometrium plays a vital role in fertility, providing a receptive environment for embryo implantation and development. Understanding the endometrial physiology is essential for developing new strategies to improve reproductive healthcare. Human endometrial organoids (hEOs) are emerging as powerful models for translational research and personalized medicine. However, most hEOs are cultured in a 3D microenvironment that significantly differs from the human endometrium, limiting their applicability in bioengineering. This study presents a hybrid endometrial-derived hydrogel that combines the rigidity of PuraMatrix (PM) with the natural scaffold components and interactions of a porcine decellularized endometrial extracellular matrix (EndoECM) hydrogel. This hydrogel provides outstanding support for hEO culture, enhances hEO differentiation efficiency due to its biochemical similarity with the native tissue, exhibits superior in vivo stability, and demonstrates xenogeneic biocompatibility in mice over a 2-week period. Taken together, these attributes position this hybrid endometrial-derived hydrogel as a promising biomaterial for regenerative treatments in reproductive medicine., This work was supported by Instituto de Salud Carlos III and co-founded by the European Union (Fondo Social Europeo), «El FSE invierte en tu futuro» (PI21/00305 [IC]) through the Miguel Servet Program (CP20/00120 [HF]; CP19/00149 [IC]), Ministerio de Universidades (FPU20/00251 [MGÁ], FPU19/04850 [ARE], FPU18/06327 [EFH], MS21-142 [CBF]), Generalitat Valenciana (CIAPOT/2022/29 [MAH], CIPROM/2021/058 [AP and IC]), and Vicerrectorado de Investigación de la Universitat Politècnica de València (PAID-10-22 [FGR]).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Glucose-Fueled Gated Nanomotors: Enhancing In Vivo Anticancer Efficacy via Deep Drug Penetration into Tumors

  • Escudero-Noguera, Andrea|||0000-0003-2670-6127
  • Hicke-García, Francisco Javier|||0000-0002-8419-0467
  • Esteve-Moreno, Juan José|||0000-0002-1259-7663
  • García-Fernández, Alba|||0000-0002-8416-1674
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Lucena-Sánchez, Elena
  • Pradana-López, Sandra
  • Sanz-Álvarez, Víctor
  • Garrido-Cano, Iris
  • Torres-Ruiz, Sandra
  • Cejalvo, Juan Miguel
  • Diez-Sánchez, Paula
[EN] Bioinspired nano/micromotors with drug delivery capabilities are emerging tools with the promising potential to treat numerous diseases. However, some major challenges must be overcome before reaching real biomedical applications. Above all, it is necessary to design engines that employ biocompatible and bioavailable fuels to induce efficient propulsion in biological environments. In addition, ideal nanomotors should also be capable of delivering the cargo on-command using selected stimuli. To tackle these challenges, we herein present the design and evaluation (both in vitro and in vivo) of a glucose-driven gated Janus nanomotor that performs on-demand anticancer drug delivery to treat solid tumors. The motor's nanoarchitectonics is based on the anisotropic conjunction of catalytic platinum nanodendrites (PtNds) and a mesoporous silica nanoparticle (acting as a nanocontainer for anticancer drug doxorubicin) capped with enzyme glucose oxidase (GOx). Autonomous nanomotor movement is achieved thanks to two catalytic components, GOx and PtNds, in a hybrid cascade reaction: GOx transforms glucose to give H2O2 that is subsequently catalyzed by PtNds into H2O and O2. Besides, gatekeeper moieties (GOx) respond to the presence of intracellular proteases, which induces doxorubicin delivery. Biological experiments with the nanomotor are carried out in cancer cell cultures, three-dimensional (3D) tumor models (spheroids), in vivo and in patient-derived organoids (PDOs). A strong anticancer effect is found and attributed to the synergistic combination glucose-induced propulsion, controlled drug delivery, elimination of glucose (by GOx), ROS production (H2O2 generation by GOx) and hypoxia reduction (O2 generated by PtNds). Taken together, this study advances the engineering of endogenously fueled nanomotors for in vivo operation and provides insights into the application of active particles in cancer therapy toward clinical application., The authors acknowledge the financial support from Project PROMETEO 2018/024 from the Generalitat Valenciana, Project RTI2018-100910-B-C41 and PID2021-126304OB-C41 funded by MCIN/AEI and FEDER, Project MFA/2022/049 from Advanced Materials program funding by European Union NextGenerationEU (PRTR-C17.I1) and the Generalitat Valenciana and the European Research Council (ERC) via Advanced Grant (101052997, EDISON). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or European Research Council. Neither the European Union nor the granting authority can be held responsible for them. A.E. thanks the Generalitat Valenciana for her PhD grant (ACIF/2018/110). F.J.H. thanks MIU for his FPU grant (FPU20/06021). E.L.-S. is also grateful for her FPU fellowship funded by MINECO (FPU18/06539). P.D. thanks the Instituto de Salud Carlos III and the European Social Fund for financial support "Sara Borrell" (CD20/00120) and Scientific Foundation of the Spanish Association Against Cancer (AECC) for her postdoctoral grant (INVES246470DIEZ). S.P.-L. thanks Investigo program of the Spanish Government funded by NextGenerationEU from the European Union. V.S.-A. thanks MIU for his FPI grant (PRE2022-103714), J.J.E.-M. thanks the AECC Scientific Foundation for his PhD grant (PRDVA21651ESTE). I.G.-C. was funded by Margarita Salas postdoctoral grant (European Union-Next generation EU). J.M.C. was funded by Sociedad Espanola de Oncologia Medica (Juan Rodes-SEOM). The authors are especially thankful to the associations Amunt Contra el Cancer, La Venuseta, Corazon Solidario Contra el Cancer, Mou-te Per Elles, and Asociacion Las Triples. Scheme A and Figures A-i,B-i, A-i, A, A, and A were created with BioRender.com https://BioRender.com/xs7c89a
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hormonal Regulation of Ovule Initiation in Arabidopsis

  • Barro-Trastoy, Daniela
  • Gomez, Maria Dolores
  • Tornero Feliciano, Pablo|||0000-0001-9755-7726
  • PEREZ AMADOR, MIGUEL ANGEL|||0000-0003-4518-3544
[EN] As seed precursors, ovules are fundamental organs during the plant life cycle. Decades of morphological and molecular study have allowed for the elucidation of the complex and intricate genetic network regulating ovule development. Ovule and seed number is highly dependent on the number of ovule primordia that are determined from the placenta during early pistil development. Ovule initiation is positively regulated by the plant hormones auxins, cytokinins, and brassinosteroids, as well as negatively regulated by gibberellins. Each hormone does not act independently; multiple points of hormonal crosstalk occur to coordinately regulate ovule primordia initiation. In this review, we highlight the roles of these hormones and their interactions in the genetic and hormonal network co-regulating ovule initiation in Arabidopsis., Open Access funding provided thanks to the CRUECSIC agreement with Springer Nature. This research was funded by MCIN/AEI/10.13039/501100011033 BIO2017-83138R and PID2020-113920RB-I00, and Generalitat Valenciana AICO/2020/256. D.B.-T. was the recipient of a pre-doctoral fellowship from the Spanish Ministry of Universities, FPU18/00331.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Linear-Phase-Type probability modelling of functional PCA with applications to resistive memories

  • Ruiz-Castro, Juan E.
  • Acal, Christian
  • Aguilera, Ana M.
  • Roldán, Juan B.
  • Aguilera-Morillo, M. Carmen|||0000-0003-1027-9773
[EN] Functional principal component analysis (FPCA) based on Karhunen-Loeve (K-L) expansion allows to describe the stochastic evolution of the main characteristics associated to multiple systems and devices. Identifying the probability distribution of the principal component scores is fundamental to characterize the whole process. The aim of this work is to consider a family of statistical distributions that could be accurately adjusted to a previous transformation. Then, a new class of distributions, the linear-phase-type, is introduced to model the principal components. This class is studied in detail in order to prove, through the K-L expansion, that certain linear transformations of the process at each time point are phase-type distributed. This way, the one-dimensional distributions of the process are in the same linear-phase-type class. Finally, an application to model the reset process associated with resistive memories is developed and explained. (C) 2020 Published by Elsevier B.V. on behalf of International Association for Mathematics and Computers in Simulation (IMACS)., We would like to thank F. Campabadal and M.B. Gonzalez from the IMB-CNM (CSIC) in Barcelona for fabricating and providing the experimental measurements of the devices employed here. We acknowledge the support of the Spanish Ministry of Science, Innovation and Universities under projects TEC2017-84321-C4-3-R, MTM201788708-P, IJCI-2017-34038 (also supported by the FEDER, Spain program) and the PhD grant, Spain (FPU18/01779) awarded to Christian Acal. This work has made use of the Spanish ICTS Network MICRONANOFABS
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cloud White: Detecting and Estimating QoS Degradation of Latency-Critical Workloads in the Public Cloud

  • Pons-Escat, Lucía|||0000-0002-4582-7744
  • Feliu-Pérez, Josué|||0000-0003-3017-4266
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Pons Terol, Julio|||0000-0002-5654-6753
  • Huang, Chaoyi
[EN] The increasing popularity of cloud computing has forced cloud providers to build economies of scale to meet the growing demand. Nowadays, data-centers include thousands of physical machines, each hosting many virtual machines (VMs), which share the main system resources, causing interference that can significantly impact on performance. Frequently, these data-centers run latency-critical workloads, whose performance is determined by tail latency, which is very sensitive to the interference of co-running workloads. To prevent QoS violations, cloud providers adopt overprovisioning strategies but they reduce the server utilization and increase the costs. A mechanism that accurately estimates performance degradation dynamically in a production system would allow cloud providers to improve the servers' utilization. In this work we propose Cloud White, an approach that is able to detect the inter-VM interference in scenarios with multiple co-located latency-critical VMs and estimate the performance degradation using multi-variable regression models. Unlike previous proposals, Cloud White is built taking into account the limitations of a public cloud production system. Experimental results show that Cloud White is able to estimate performance degradation with a small overall prediction error of 5%., This work has been supported by Huawei Cloud, and in part by Spanish Ministerio de Universidades under grant FPU18/01948, and by Spanish Ministerio de Universidades and European ERDF under grants RTI2018-098156-B-C51 and PID2021-123627OB-C51. Funding for open access charge: CRUE-Universitat Politec-nica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of Phosphorus-Containing Polyanilines by Electrochemical Copolymerization

  • Martínez-Sánchez, Beatriz
  • Quintero-Jaime, Andrés Felipe
  • Cazorla-Amorós, Diego
  • Morallón, Emilia
  • Huerta, Francisco|||0000-0002-9791-0355
[EN] In this study, the phosphonation of a polyaniline (PANI) backbone was achieved in an acid medium by electrochemical methods using aminophenylphosphonic (APPA) monomers. This was done through the electrochemical copolymerization of aniline with either 2- or 4-aminophenylphosphonic acid. Stable, electroactive polymers were obtained after the oxidation of the monomers up to 1.35 V (reversible hydrogen electrode, RHE). X-ray photoelectron spectroscopy (XPS) results revealed that the position of the phosphonic group in the aromatic ring of the monomer affected the amount of phosphorus incorporated into the copolymer. In addition, the redox transitions of the copolymers were examined by in situ Fourier-transform infrared (FTIR) spectroscopy, and it was concluded that their electroactive structures were analogous to those of PANI. From the APPA monomers it was possible to synthesize, in a controlled manner, polymeric materials with significant amounts of phosphorus in their structure through copolymerization with PANI., The authors would like to thank MINECO, FEDER (MAT2016-76595-R) for financial support. A.F.Q.-J. gratefully acknowledges the Generalitat Valenciana for the financial support through the Santiago Grisolia grant (GRISOLIA/2016/084). B.M.-S. acknowledges the Vice-rectorate for Research and Knowledge Transfer of University of Alicante for financial support (AII2018-16), as well as the Spanish Ministry of Science, Innovation and Universities for the FPU grant (FPU18/05127).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Identifying and regulating emotions after acquired brain injury: the role of interoceptive sensibility

  • Desdentado, Lorena
  • Miragall, Marta
  • Navarro, Maria Dolores
  • Baños, Rosa M.
  • Llorens Rodríguez, Roberto|||0000-0002-8677-8707
[EN] : Interoceptive deficits are associated with difficulties in identifying and regulating emotions. However, research on interoception after acquired brain injury (ABI) is scarce, and its relationship with emotional difficulties in this population is unknown. This study aimed to (1) examine differences in self-reported alexithymia, performance-based emotional awareness, emotion regulation, depression, and interoceptive sensibility between ABI and control individuals; and (2) analyze the role of adaptive interoceptive dimensions in these emotional processes after ABI, The author(s) declare financial support was received for the research, authorship, and/or publication of this article. LD is supported by grant FPU18/01690 funded by Ministerio de Ciencia e Innovación/ Agencia Estatal de Investigación/10.13039/501100011033 and by European Social Fund - Investing in your future. RL is funded by Conselleria d Innovació, Universitats, Ciència i Societat Digital of Generalitat Valenciana (CIDEXG/2022/15).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Control predictivo de sistemas ciberfísicos, Predictive Control of Cyber-Physical Systems

  • Maestre, José María
  • Chanfreut, Paula
  • García Martín, Javier
  • Masero, Eva
  • Inoue, Masaki
  • Camacho, Eduardo F.
[EN] Predictive control encompasses a family of controllers that continually replan the system inputs during a certain time horizon to optimize their expected evolution according to a given criterion. This methodology has among its current challenges the adaptation to the paradigm of the so-called cyber-physical systems, which are composed of computers, sensors, actuators and physical entities of various kinds, including robots and even human beings who exchange information to control physical processes. This tutorial introduces the core concepts for the application of predictive control to cyber-physical systems by reviewing a series of examples that exploit the versatility of this design framework so as to solve the challenges presented by 21st century applications., [ES] El control predictivo engloba a una familia de controladores que replanifican continuamente las entradas del sistema durante un cierto horizonte temporal con el fin de optimizar su evolución esperada conforme a un criterio dado. Esta metodología tiene entre sus retos actuales la adaptación al paradigma de los llamados sistemas ciberfísicos, que están compuestos por computadoras, sensores, actuadores y entidades físicas de diversa índole entre las que se incluyen robots e incluso seres humanos que intercambian información con el objetivo de controlar procesos físicos. Este tutorial presenta los conceptos centrales de la integración del control predictivo en este tipo de sistemas mediante el repaso a una serie de ejemplos que explotan la versatilidad de este marco de diseño de controladores para resolver los desafíos que presentan las aplicaciones del siglo XXI., Este trabajo ha sido financiado por el European Research Council (ERC) en el marco del programa de investigación e innovación Horizonte 2020 de la Unión Europea [OCONTSOLAR, ref. 789051], por el Ministerio de Economía con el proyecto C3PO [ref. DPI2017-86918-R], por el Ministerio de Ciencia, Innovación y Universidades en el marco del programa de Formación de Profesorado Universitario (FPU) [FPU17/02653 y FPU18/04476] y por la Consejería Transformación Económica, Industria, Conocimiento y Universidades en el marco del programa de Ayudas a los agentes públicos del Sistema Andaluz del Conocimiento, para la realización de proyectos de I+D+i (PAIDI 2020) [Ampliación Aquacollect, ref. P18-HO-4713].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Intestinal group 1 innate lymphoid cells drive macrophage-induced inflammation and endocrine defects in obesity and promote insulinemia

  • Liébana-García, Rebeca
  • Olivares, Marta
  • Francés-Cuesta, Carlos
  • Rubio, Teresa
  • Rossini, Valerio
  • Quintás, Guillermo
  • Sanz, Yolanda
[EN] Hypercaloric diets overactivate the intestinal immune system and disrupt the microbiome and epithelial cell functions, impairing glucose metabolism. The origins of this inflammatory cascade are poorly characterized. We investigated the involvement of intestinal proinflammatory group 1 innate lymphoid cells (ILC1s) in obesity progression and metabolic disruption. In obese mice, we studied longitudinally the ILC1s response to the diet and ILC1s depletion to address its role in obesity. ILC1s are required for the expansion of pro-inflammatory macrophages and ILC2s. ILC1s depletion induced the ILC3-IL-22 pathway, increasing mucin production, antimicrobial peptides, and neuroendocrine cells. These changes were translated into higher gut hormones and reduced insulinemia and adiposity. ILC1s depletion was also associated with a bloom in Akkermansia muciniphila and decreases in Bilophila spp. Intestinal-ILC1s are upstream activators of inflammatory signals, connecting immunity with the microbiome, the enteroendocrine system, and the intestinal barrier in the control of glucose metabolism and adiposity., This study has been supported by the Spanish Ministry of Science and Innovation (MICINN) (grant PID2020-119536RB-I00). An PFU contract to RL-G from the Spanish Ministry of Universities (PFU 18/02026) and a Marie Sklodowska Curie Actions (MSCA-IF) "MicroILCs" (GA: 8905454) contract to MO are acknowledged. The grant of Spanish Ministry of Science and Innovation (MCIN/AEI) of Center of Excellence Accreditation Severo Ochoa (CEX2021-001189-S/ MCIN/AEI / 10.13039/501100011033) is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

InSilico Classifiers for the Assessment of Drug Proarrhythmicity

  • Llopis-Lorente, Jordi
  • Cano, Jordi
  • Gomis-Tena Dolz, Julio|||0000-0002-1309-2368
  • Romero Pérez, Lucia|||0000-0003-4605-8630
  • Saiz Rodríguez, Francisco Javier|||0000-0002-9850-0825
  • Trenor Gomis, Beatriz Ana|||0000-0001-9166-6112
[EN] Drug-induced torsade de pointes (TdP) is a life-threatening ventricular arrhythmia responsible for the withdrawal of many drugs from the market. Although currently used TdP risk-assessment methods are effective, they are expensive and prone to produce false positives. In recent years, in silico cardiac simulations have proven to be a valuable tool for the prediction of drug effects. The objective of this work is to evaluate different biomarkers of drug-induced proarrhythmic risk and to develop an in silico risk classifier. Cellular simulations were performed using a modified version of the O'Hara et al. ventricular action potential model and existing pharmacological data (IC50 and effective free therapeutic plasma concentration, EFTPC) for 109 drugs of known torsadogenic risk (51 positive). For each compound, four biomarkers were tested: T-x (drug concentration leading to a 10% prolongation of the action potential over the EFTPC), T-qNet (net charge carried by ionic currents when exposed to 10 times the EFTPC with respect to the net charge in control), T-triang (triangulation for a drug concentration of 10 times the EFTPC over triangulation in control), and T-EAD (drug concentration originating early afterdepolarizations over EFTPC). Receiver operating characteristic (ROC) curves were built for each biomarker to evaluate their individual predictive quality. At the optimal cutoff point, accuracies for T-x, T-qNet, T-triang, and T-EAD were 89.9, 91.7, 90.8, and 78.9% respectively. The resulting accuracy of the hERG IC50 test (current biomarker) was 78.9%. When combining T-x, T-qNet and T-triang into a classifier based on decision trees, the prediction improves, achieving an accuracy of 94.5%. The sensitivity analysis revealed that most of the effects on the action potential are mainly due to changes in I-Kr, I-CaL, I-NaL and I-Ks. In fact, considering that drugs affect only these four currents, TdP risk classification can be as accurate as when considering effects on the seven main currents proposed by the CiPA initiative. Finally, we built a ready-to-use tool (based on more than 450 000 simulations), which can be used to quickly assess the proarrhythmic risk of a compound. In conclusion, our in silico tool can be useful for the preclinical assessment of TdP-risk and to reduce costs related with new drug development. The TdP risk-assessment tool and the software used in this work are available at https://riunet.upv.es/handle/10251/136919., This work was partially supported by the Direccion general de Politica Cientifica de la Generalitat Valenciana (PROMETEO/2020/043); by "Primeros Proyectos de Investigacion" (PAID06-18) from Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia (UPV), Valencia, Spain; as well as from the "Plan Estatal de Investigacion Cientifica y Tecnica y de Innovacion 20172020" from the Ministerio de Ciencia e Innovacion y Universidades (PID2019-104356RB-C41/AEI/10.13039/501100011033). J.L.L. is being funded by the Ministerio de Ciencia, Innovacion y Universidades for the "Formacion de Profesorado Universitario" (Grant Reference: FPU18/01659).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Streaming cascade-based speech translation leveraged by a direct segmentation model

  • Iranzo-Sánchez, Javier
  • Baquero-Arnal, Pau
  • Jorge-Cano, Javier|||0000-0002-9279-6768
  • Silvestre Cerdà, Joan Albert|||0000-0003-2291-8296
  • Giménez Pastor, Adrián
  • Civera Saiz, Jorge|||0000-0002-0963-0143
  • Sanchis Navarro, José Alberto|||0000-0002-2943-0990
  • Juan, Alfons|||0000-0002-9984-4072
[EN] The cascade approach to Speech Translation (ST) is based on a pipeline that concatenates an Automatic Speech Recognition (ASR) system followed by a Machine Translation (MT) system. Nowadays, state-of-the-art ST systems are populated with deep neural networks that are conceived to work in an offline setup in which the audio input to be translated is fully available in advance. However, a streaming setup defines a completely different picture, in which an unbounded audio input gradually becomes available and at the same time the translation needs to be generated under real-time constraints. In this work, we present a state-of-the-art streaming ST system in which neural-based models integrated in the ASR and MT components are carefully adapted in terms of their training and decoding procedures in order to run under a streaming setup. In addition, a direct segmentation model that adapts the continuous ASR output to the capacity of simultaneous MT systems trained at the sentence level is introduced to guarantee low latency while preserving the translation quality of the complete ST system. The resulting ST system is thoroughly evaluated on the real-life streaming Europarl-ST benchmark to gauge the trade-off between quality and latency for each component individually as well as for the complete ST system., The research leading to these results has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement no. 761758 (X5Gon) and 952215 (TAILOR); the Government of Spain's research project Multisub, ref. RTI2018-094879-B-I00 (MCIU/AEI/FEDER,EU) and FPU scholarships FPU14/03981 and FPU18/04135; and the Generalitat Valenciana's research project Classroom Activity Recognition, ref. PROMETEO/2019/111 and predoctoral research scholarship ACIF/2017/055.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Traditional Constructive Techniques and Their Relation to Geographical Conditioning Factors. The Case of Half-Timbered Walls in Spain

  • Hueto-Escobar, Alicia|||0000-0003-4628-6545
  • Mileto, Camilla|||0000-0002-6987-8802
  • Vegas López-Manzanares, Fernando|||0000-0003-0315-6839
  • Macchioni, Nicola
[EN] Traditional architecture is the result of collective experience in the optimum use of available materials in a given location and adapted to specific conditions and needs. Although forms and groups also depend on other cultural and social issues, the constructive techniques used depend mostly on geographical conditioning factors such as altitude, hydrography, lithology, climate, etc. This text aims to analyse the possible relationships among the multiple variants and specific geographical conditioning factors of each location; in turn, this should provide an understanding of the reasons motivating or reducing their use and the mechanisms adapting these techniques to these conditioning factors. The analysis cross-referenced GIS systems from a database compiling information on 1160 half-timbered walls with a series of themed maps containing information on geographical factors. The conclusions reached show that a single technique adapts to different geographical conditioning factors, giving rise to a wide range of solutions which can provide greater durability and improved habitability. This capacity to adapt to the location is a lesson in sustainability that can be applied at present and is above all part of the intrinsic wealth and value of traditional architecture., This work is part of the research project La arquitectura de tierra en la Península Ibérica: Estudio de los riesgos naturales, sociales y antrópicos y estrategias de intervención e incremento de la resiliencia Risk-Terra (ref. RTI2018-095302-B-I00, MCIU/AEI/FEDER, UE; main researchers: Camilla Mileto & Fernando Vegas), funded by the Spanish Ministry of Science, Innovation and Universities/Ministerio de Ciencia, Innovación y Universidades. This research has been developed within a doctoral thesis funded by the Spanish Ministry of Science, Innovation and Universities/Ministerio de Ciencia, Innovación y Universidades (Ref. FPU18/01596). Funding for open access charge: Universitat Politècnica de València [FPU18/01596,RTI2018-095302-B-I00];
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical Analysis of the Effects of Grooved Stator Vanes in a Radial Turbine Operating at High Pressure Ratios Reaching Choked Flow

  • Galindo, José|||0000-0001-6068-182X
  • Tiseira, Andrés-Omar|||0000-0001-9472-2386
  • Navarro, Roberto|||0000-0003-2587-4954
  • Echavarria-Olaya, Juan David|||0000-0002-9611-0751
  • Lukas Benjamin Inhestern
[EN] The flow through the stator vanes of a variable geometry turbocharger turbine can reach supersonic conditions and generates a shock wave on the stator vanes, which has a potential impact on the flow loss as well as on unsteady aerodynamic interaction. The shock wave causes a sudden increase in pressure and can lead to boundary separation and strong excitation force, besides pressure fluctuation in the rotor blades. Thus, in this study, the flat surface of the vanes of a commercial variable geometry turbocharger turbine has been modified to analyze the effects of two grooved surfaces configuration using CFD simulations. The results reveal that the grooves change the turbine efficiency, especially at higher speed, where the increase in the efficiency is between 2% and 6% points. Additionally, the load fluctuation around the rotor leading edge can be reduced and minimize the factors that compromise the integrity of the turbine. Furthermore, the grooves reduce the supersonic pocket developed on the suction side of the vane and diminish the shock wake intensity. Evaluating the effectiveness of the available energy usage in the turbine, on the one hand, at lower speed, the fraction of energy at the inlet destinated to produce power does not change significantly with a grooved surface on the stator vanes. On the other hand, at higher speed and higher pressure ratio with 5 grooves occurs the most effective approach of the maximum energy., The work has been partially supported by the Subprograma de Formación de Profesorado Universitario (FPU). Ministerio de Universidades. FPU18/02628.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Feasibility of iron-based shape memory alloy strips for shear strengthening of damaged RC beams promoting the formation of plastic hinges

  • Traver-Abella, Celia
  • Ruiz Pinilla, Joaquín Guillermo
  • Monserrat-Lopez, Andrea
  • Montoya-Coronado, Luis A.
  • Ribas, Carlos
  • Cladera, Antoni
  • Miguel Sosa, Pedro|||0000-0001-5395-8149
  • Bonet Senach, José Luís|||0000-0002-6687-5307
[EN] This research focuses on the proof of concept of the feasibility of iron-based shape memory alloys strips (Fe-SMA) to strengthen damaged structures by promoting the yielding of longitudinal reinforcement. For this purpose, an experimental campaign on real-scale reinforced concrete beams previously damaged on shear and retested after being strengthened was carried out. The strengthening technique consists of external Fe-SMA strips wrapping the beams. The results show a very significant increase in both shear strength and ductility. In addition, shear predictions were calculated and compared by several design models. This study highlights the potentialities of Fe-SMA as a strengthening technique for damaged beams on shear., The authors would like to thank the financial support provided by Grants: PID2021-126397OB-I00, PID2021-123701OB-C22, BIA2015-64672-C4-4-R and BIA2015-3 64672-C4-3-R by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe."; RTI2018-099091-B-C21-AR and RTI2018-099091-B-C22 by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" and BIA2015-64672-C4-4-R and BIA2015-64672-C4-3-R (AEI/FEDER, UE); and TED2021-129358B-I00 and TED2021-130272B-C22 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR". The Regional Valencian Government also supported this research with Project AICO/2020/295. Andrea Monserrat is supported by the Ministry of Universities (Spain) with the Recovery, Transformation and Resilience Plan (RD 289/2021 and order UNI/551/2021) funded by NextGenerationEU. The authors thank the Spanish Ministry of Science and Innovation for Grant FPU18/03310 that supported Celia Traver Abella. This research work was undertaken at the Concrete Science and Technology University Institute (ICITECH) of the Universitat Politecnica de Valencia (UPV; Spain), with concrete supplied by Caplansa. They also appreciate the contribution of the re-fer AG Strengthening Solution Company, which provided the memory steel (Fe-SMA strips).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Considering population variability of electrophysiological models improves the assessment of drug-induced torsadogenic risk

  • Llopis-Lorente, Jordi
  • Trenor Gomis, Beatriz Ana|||0000-0001-9166-6112
  • Saiz Rodríguez, Francisco Javier|||0000-0002-9850-0825
[EN] Background and Objective In silico tools are known to aid in drug cardiotoxicity assessment. However, computational models do not usually consider electrophysiological variability, which may be crucial when predicting rare adverse events such as drug-induced Torsade de Pointes (TdP). In addition, classification tools are usually binary and are not validated using an external data set. Here we analyze the role of incorporating electrophysiological variability in the prediction of drug-induced arrhythmogenic-risk, using a ternary classification and two external validation datasets. Methods The effects of the 12 training CiPA drugs were simulated at three different concentrations using a single baseline model and an electrophysiologically calibrated population of models. 9 biomarkers related with action potential (AP), calcium dynamics and net charge were measured for each simulated concentration. These biomarkers were used to build ternary classifiers based on Support Vector Machines (SVM) methodology. Classifiers were validated using two external drug sets: the 16 validation CiPA drugs and 81 drugs from CredibleMeds database. Results Population of models allowed to obtain different AP responses under the same pharmacological intervention and improve the prediction of drug-induced TdP with respect to the baseline model. The classification tools based on population of models achieve an accuracy higher than 0.8 and a mean classification error (MCE) lower than 0.3 for both validation drug sets and for the two electrophysiological action potential models studied (Tomek et al. 2020 and a modified version of O'Hara et al. 2011). In addition, simulations with population of models allowed the identification of individuals with lower conductances of IKr, IKs, and INaK and higher conductances of ICaL, INaL, and INCX, which are more prone to develop TdP. Conclusions The methodology presented here provides new opportunities to assess drug-induced TdP-risk, taking into account electrophysiological variability and may be helpful to improve current cardiac safety screening methods., This project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101016496 (SimCardioTest). This workwas alsopartially supported by the Direccion General de Politica Cientifica de la Generalitat Valenciana (PROMETEO/2020/043). JL is being funded by the Ministerio de Ciencia, Innovacion y Universidades for the Formacion de Profesorado Universitario (grant reference: FPU18/01659). Funding for open access charge: Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Convergent evolution of plant prickles by repeated gene co-option over deep time

  • Satterlee, James W.
  • Alonso-Martín, David
  • Jenike, Katherine M.
  • He, Jia
  • Ramakrishnan, Srividya
  • Benoit, Matthias
  • Gentile, Iacopo
  • Hendelman, Anat
  • Shohat, Hagai
  • Fitzgerald, Baline
  • Robitaille, Gina M.
  • Gillis, Jesse
  • van Eck, Joyce
  • Gramazio, Pietro|||0000-0003-2226-7999
  • Arrones-Olmo, Andrea|||0000-0003-3926-0291
  • Villanueva-Párraga, Gloria|||0000-0002-1475-2882
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Vilanova Navarro, Santiago|||0000-0003-4939-9713
[EN] An enduring question in evolutionary biology concerns the degree to which episodes of convergent trait evolution depend on the same genetic programs, particularly over long timescales. In this work, we genetically dissected repeated origins and losses of prickles¿sharp epidermal projections¿that convergently evolved in numerous plant lineages. Mutations in a cytokinin hormone biosynthetic gene caused at least 16 independent losses of prickles in eggplants and wild relatives in the genus Solanum. Homologs underlie prickle formation across angiosperms that collectively diverged more than 150 million years ago, including rice and roses. By developing new Solanum genetic systems, we leveraged this discovery to eliminate prickles in a wild species and an indigenously foraged berry. Our findings implicate a shared hormone activation genetic program underlying evolutionarily widespread and recurrent instances of plant morphological innovation., This study was supported by a National Science Foundation Postdoctoral Fellowship in Biology (IOS-2305651) (J.W.S.); a postdoctoral fellowship (RYC2021-031999-I) funded by MCIN/AEI /10.13039/ 501100011033 and by European Union NextGenerationEU/PRTR (P.G.); a predoctoral fellowship (FPU18/01742) from Spanish Ministerio de Ciencia, Innovación y Universidades (A.A.); a predoctoral fellowship (PRE2019-089256) funded by MCIN/AEI/ 10.13039/501100011033 and by ESF investing in your future (G.V.); Plant Health and Environment Department of the French National Institute for Agriculture, Food, and Environment (INRAE) (M.Beno.); Biologie et amélioration des Plantes departments of INRAE (M.Bend.); the William Randolph Hearst Scholarship from the Cold Spring Harbor School of Biological Sciences (M.J.P.); Fonds de recherche du Québec en Nature et Technologies Postdoctoral Fellowship (E.G.); the Sibbald Trust Research Fellowship (R.H.); a grant of the German Research Association DFG (STE 1120/17-1) (N.S.); NSF Planetary Biodiversity Initiative grant PBI Solanum: a worldwide initiative (DEB&#8208;0316614) (S.K.); National Geographic Society Northern Europe Award GEFNE49-12 (T.S.); National Institutes of Health grant R01MH113005 (J.G.); grant CIPROM/2021/020 funded by Conselleria d Innovació, Universitats, Ciència i Societat Digital of the Generalitat Valenciana (J.P.); grant PID2021-128148OB-I00 funded by MCIN/AEI/10.13039/501100011033/ and ERDF A way of making Europe (J.P.); grant PDC2022-133513-I00 funded by MCIN/AEI/10.13039/501100011033/ and by European Union NextGenerationEU/PRTR (J.P.); National Science Foundation Plant Genome Research Program grant IOS-2216612 (A.F., J.G., J.V.E., M.C.S., and Z.B.L.); and the Howard Hughes Medical Institute (Z.B.L.).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Oviductal extracellular matrix hydrogels enhance in vitro culture of rabbit embryos and reduce deficiencies during assisted reproductive technologies

  • Francés-Herrero, Emilio
  • Sebastián-León, Patricia
  • Bueno-Fernandez, Clara
  • Rodríguez-Eguren, Adolfo
  • Gómez-Álvarez, María
  • Faus, Amparo
  • Diaz-Gimeno, Patricia
  • Cervelló, Irene
  • Lorenzo-Rebenaque, Laura|||0000-0002-4759-258X
  • Casto-Rebollo, Cristina|||0000-0003-4646-345X
  • Vicente Antón, José Salvador|||0000-0003-0481-3802
  • Marco-Jiménez, Francisco|||0000-0002-5226-4118
[EN] In vitro embryo culture often falls short of mimicking the physiological dynamism occurring in the reproductive tract, prompting developmental plasticity in mammalian embryos with consequential genotypic and phenotypic deviations. Recent research highlights the potential of biological derivatives in in vitro culture to mitigate these effects, being the extracellular matrix (ECM) one of the most important components in retaining structural and biological signals derived from the native source tissue. Current bioengineering techniques could provide ECM-based biomaterials mimicking the native environment and offering optimal embryonic development. Rabbit oviducts (n¿=¿24) were decellularized and solubilized to create tissue-specific ECM (OviECM) hydrogels. Following physicochemical characterization, these hydrogels were applied as coatings for the in vitro culture of two-cell embryos over 48 h, along with embryos cultured under In vitro control conditions (n¿=¿218/group), which were subsequently transferred to recipient females. A subset of embryos was recovered on day 6 for transcriptomic analysis (n¿=¿75¿80/group), while the remaining embryos were used to assess implantation and birth rates. Rabbit weights were monitored over 20 weeks post-delivery, with blood tests conducted at weeks 8 and 20. Bayesian inference methods were used for statistical analysis. Differences were considered relevant if P¿¿¿0.8 (80%). No differences in embryo development and morphology were detected between the OviECM coating and In vitro control conditions. However, embryos cultured on these coatings exhibited upregulation of pathways involved in antigen presentation and immune system activation, as well as, increased cellular response to external stimulus and intracellular protein transport. The implantation and live birth rates were significantly higher in the coating group than in the In vitro control group (30.8% vs. 26.1% and 21.2% vs. 18.1%, respectively). During the first 20 weeks of life, the animals from the coating group showed higher weights than the In vitro control group P0¿>¿0.8. The animals of both experimental groups showed normal blood parameters. Implementation of OviECM coatings allows for improving in vitro conditions and decreases postnatal phenotypic deviations after assisted reproductive technology (ART). This study could initiate a new embryo culture techniques era to guarantee that ART is utilized in the most efficient and safest possible practice., This work was supported by the Instituto de Salud Carlos III (ISCIII) and co-funded by the European Union (Fondo Social Europeo «El FSE invierte en tu futuro») [PI17/01039, PI21/00305, CP19/00149 (I.C.)]; Spanish Ministry of Science, Innovation, and Universities [FPU18/06327 (E.F.-H.), MS21-142 [C.B.-F.], FPU19/04850 (A.R.-E.), FPU20/00251 (M.G.-Á.)]; and Generalitat Valenciana [PROMETEO/2018/137, CIPROM/2021/058 (I.C., and A.P.)].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of air velocity on airborne ultrasound application in pork liver drying

  • Sanchez-Torres, E.A.|||0000-0003-4121-2459
  • Giacomozzi, Anabella Soledad|||0000-0002-6528-3000
  • Benedito Fort, José Javier|||0000-0003-0163-4593
  • Bon Corbín, José|||0000-0002-0457-9705
  • Garcia-Perez, J.V.|||0000-0002-9993-4246
  • Dalmau-Estelrich, Maria Esperanza
[EN] Airborne ultrasound is considered a feasible emerging technology for the intensification of the drying of biological materials due to its mild thermal effect avoiding the degradation of heat sensitive compounds. The effects brought about by airborne ultrasound on the drying are largely dependent on both the product structure itself and the process variables used. Thus, the present study examines the effect of the air velocity and the application of airborne ultrasound during the low-temperature convective drying of pork liver. For this purpose, drying experiments were carried out at 50 ¿ 6 m¿s 1 , C on pork liver cylinders using different air velocities, ranging from 1 to without (AIR) and with ultrasound application (US). The modelling of the drying kinetics was approached using the diffusion theory, evaluating both the contribution of external convection and shrinkage. The experimental results demonstrated that the application of airborne ultrasound only increased the drying rate at air velocities below 3 m¿s 1 , shortening the drying time by up to 30 %., The authors acknowledge the financial support from the Ministerio de Economía y Competitividad (MINECO) and Instituto Nacional de Investigaci¿ on y Tecnología Agraria y Alimentaria (INIA) in Spain (Project RTA2017-00024-C04-03). Eduardo A. Sanchez-Torres acknowledges the FPU PhD contract (FPU18/01439) granted by the Spanish Ministry of Science, Innovation and Universities. E. Dalmau acknowledges the Margarita Salas contract from the Universitat de les Illes Balears. Funding for open access charge: Universitat Polit` ecnica de Val` encia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A modular approach to build a hardware testbed for cloud resource management research

  • Pons-Escat, Lucía|||0000-0002-4582-7744
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Pons Terol, Julio|||0000-0002-5654-6753
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[EN] Research on resource management focuses on optimizing system performance and energy efficiency by distributing shared resources like processor cores, caches, and main memory among competing applications. This research spans a wide range of applications, including those from high-performance computing, machine learning, and mobile computing. Existing research frameworks often simplify research by concentrating on specific characteristics, such as the architecture of the computing nodes, resource monitoring, and representative workloads. For instance, this is typically the case with cloud systems, which introduce additional complexity regarding hardware and software requirements. To avoid this complexity during research, experimental frameworks are being developed. Nevertheless, proposed frameworks often fail regarding the types of nodes included, virtualization support, and management of critical shared resources. This paper presents Stratus, an experimental framework that overcomes these limitations. Stratus includes different types of nodes, a comprehensive virtualization stack, and the ability to partition the major shared resources of the system. Even though Stratus was originally conceived to perform cloud research, its modular design allows Stratus to be extended, broadening its research use on different computing domains and platforms, matching the complexity of modern cloud environments, as shown in the case studies presented in this paper., This work has been supported by the Spanish Ministerio de Universidades under the grant FPU18/01948 and by the Spanish Ministerio de Ciencia e Innovación and European ERDF under grants PID2021-123627OB-C51 and TED2021-130233B-C32, and by Generalitat Valenciana under Grant AICO/2021/266.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Adequacy of existing circular economy assessment tools for higher education institutions

  • Valls-Val, Karen
  • Ibañez-Forés, Valeria
  • Bovea, María D.
  • Lo-Iacono-Ferreira, Vanesa G.|||0000-0002-1411-8785
  • Capuz-Rizo, Salvador F.|||0000-0003-3447-8849
[EN] Circular economy (CE) has been identified as a key strategy to contribute to sustainable development and the achievement of the Sustainable Development Goals of the 2030 Agenda. In this context, organisations have started to demand methods to measure and monitor their level of circularity. To facilitate this task, several CE tools have been developed in recent years, which automatically measure, track and communicate the level of circularity of organisations based on answers to qualitative questions. In particular, Higher Education Institutions (HEIs), as organisations engaged in education, research and community services, play an important role in promoting sustainability and should be an example in the transition process towards CE. Therefore, they need approaches that allow them to measure and monitor their transition towards CE. The aim of this study is to analyse the adequacy of existing CE tools for HEIs, to check whether they consider the specificities of HEIs and to identify the required changes to make them suitable for HEIs. For this purpose, seven existing CE tools were applied to four Spanish HEIs, and were analysed and evaluated through interviews with the environmental managers of these HEIs. The results show that the existing CE tools need to be reformulated in order to make them suitable for assessing the level of circularity of HEIs and to make their outputs useful for decision-making. As a conclusion, it has been found that it is better to develop a specific CE tool for HEIs, in order to incorporate the specificities and peculiarities of such complex type of organisation, including the teaching, research and management areas., Acknowledgements The authors are grateful to the Ministerio de Ciencia, Innovaci ' on y Universidades (Spain) (FPU18/02816) for the financial support and to the respondents from the organisations for their participation in this study.