Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 80
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Impact of Twin's Landscape on the Magnetic Damping of La2/3Sr1/3MnO3 Thin Films

  • Chen, Shoulong
  • Pomar, Alberto|||0000-0002-5855-2356
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Frontera, Carlos|||0000-0002-0091-4756
  • Mestres i Andreu, Narcís|||0000-0001-6468-4227
  • Martínez, Benjamín|||0000-0001-9879-7748
Understanding the origin and mechanisms of magnetic damping in complex oxide materials is crucial for optimizing spin dynamics and tailoring their properties for specific spintronic applications. Ferromagnetic resonance spectroscopy (FMR) technique has been used to investigate the magnetic damping of multiple LaSrMnO (LSMO) epitaxial thin films with similar thickness and identical DC magnetic properties. However, the dynamic magnetic properties exhibit noticeable variations among samples. Microstructural analyses using X-ray diffraction (XRD) and atomic force microscopy (AFM), confirm that the samples are structurally identical, except for minute differences in the miscut angles of the substrates. Nevertheless, when examining the samples using backscattered electron (BSE) images in scanning electron microscopy (SEM), significant disparities in the twin distribution are observed. These variations in the twin distribution directly correlate with the observed differences in the damping values. A careful image analysis of BSE images allows to demonstrate that the increase of damping is due to the pinning of the magnetization in the twin boundaries.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Spin conduction and interfacial effects in La2/3Sr1/3MnO3/NiO/Pt heterostructures

  • Chen, Shoulong
  • Pomar, Alberto|||0000-0002-5855-2356
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Konstantinovic, Zorica|||0000-0002-6871-7038
  • Frontera, Carlos|||0000-0002-0091-4756
  • Magen Dominguez, Cesar|||0000-0002-6761-6171
  • Mestres i Andreu, Narcís|||0000-0001-6468-4227
  • Martínez, Benjamín|||0000-0001-9879-7748
In this work we report on the generation and transport of pure spin currents in LaSrMnO(LSMO)/NiO/Pt heterostructures. Pure spin currents, generated by means of spin pumping in the LSMO layer, are transmitted through the NiO layer and detected by measuring the transverse voltage signal generated by the inverse spin Hall effect (ISHE) in the Pt layer. The spin current transmission is studied as a function of the NiO thickness and temperature. NiO layers grown at room temperature are polycrystalline and their microstructural and magnetic features clearly depend on thickness. Scanning transmission electron microscopy techniques revealed that homogeneous conformal coating of the LSMO layer is only achieved for NiO layer thicknesses above about 2 nm. Below this critical thickness the NiO layer is discontinuous and its main role would be to disturb the LSMO/Pt interface causing it to behave as something similar to an insulating barrier. Magnetic measurements indicate that NiO layers are paramagnetic (PM) well below room temperature. In agreement with these observations, the amplitude of the ISHE voltage signal decreases monotonically on lowering temperature and makes evident that there are two spin conduction regimes as a function of the NiO layer thickness with different spin diffusion lengths. For thin discontinuous NiO layers a spin diffusion length of λ≈0.8 nm is found, which is slightly larger than typical values found for insulating barriers, but definitely smaller than λ≈3.8 nm found for NiO layer thickness above 2 nm. The latter being similar to λ previously reported for epitaxial NiO layers. Our findings indicate that inserting a PM NiO insulating layer of optimal thickness improves the spin transparency of the LSMO/Pt interface. Additionally, the results suggest that spin conduction through the NiO layer is likely driven by magnetic correlations and short-range thermal magnons.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Strain Relief and Domain Architecture in Epitaxial NiO Films on La2/3Sr1/3MnO3/SrTiO3 for Spin-Transport Engineering

  • Chen, Shoulong
  • Frontera, Carlos|||0000-0002-0091-4756
  • Toda-Casaban, Meritxell
  • Pomar, Alberto|||0000-0002-5855-2356
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Konstantinovic, Zorica|||0000-0002-6871-7038
  • Magen Dominguez, Cesar|||0000-0002-6761-6171
  • Martínez, Benjamín|||0000-0001-9879-7748
  • Mestres i Andreu, Narcís|||0000-0001-6468-4227
This study reports on the epitaxial growth and structural characterization of ultrathin NiO-films deposited by magnetron sputtering on LaSrMnO (LSMO) films grown on SrTiO (STO) substrates with (001)- and (111)-orientations. X-ray diffraction and atomic-force microscopy show that all NiO layers are single-phase, face-centered pseudo-cubic, atomically smooth, root-main-square (RMS) surface roughness <0.15 nm, and form abrupt interfaces with LSMO. High-resolution reciprocal-space maps reveal that the films are largely relaxed, but exhibit a slight compressive distortion, yielding unit-cell volumes larger than bulk NiO. Despite a nominal ≈7% lattice mismatch, aberration-corrected scanning transmission electron microscopy uncovers an array of misfit dislocations at the NiO/LSMO interface that help to accommodate strain allowing epitaxial growth of NiO layers. On (001)-oriented samples, the four antiferromagnetic T-domains are oblique to the sample plane, while on the (111) case, one lies in-plane. This in-plane domain shows greater spacing between ferromagnetic (111) planes due to unit cell distortion. This structural domain splitting can influence magnetic order and spin transmission efficiency, highlighting crystallographic orientation as a key factor in designing high-performance spintronic devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Crystallographic Engineering of Spin Transport in Antiferromagnetic NiO Thin Films

  • Chen, Shoulong
  • Pomar, Alberto|||0000-0002-5855-2356
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Konstantinovic, Zorica|||0000-0002-6871-7038
  • Bozzo, Bernat
  • Frontera, Carlos|||0000-0002-0091-4756
  • Magen Dominguez, Cesar|||0000-0002-6761-6171
  • Mestres i Andreu, Narcís|||0000-0001-6468-4227
  • Martínez, Benjamín|||0000-0001-9879-7748
In this work, we investigate how the crystallographic growth direction influences spin current transmission in antiferromagnetic (AF) NiO thin films. By manipulating epitaxial growth, we explored the spin transport characteristics in La2/3Sr1/3MnO3/NiO/Pt heterostructures grown on top of (001)- and (111)-oriented SrTiO3 substrates, varying the NiO barrier thickness (tNiO). Spin currents were generated via spin pumping (SP), and detection was done by the inverse spin Hall effect (ISHE). X-ray diffraction and high-resolution electron microscopy techniques confirmed high-quality epitaxial films with nearly atomically sharp interfaces and similar dislocation distributions, irrespective of the growth direction. Nevertheless, epitaxially engineered (111) heterostructures exhibited superior spin transport properties, including lower magnetic damping (α), longer spin diffusion lengths (λSd), and higher spin mixing conductance (g↑↓). The temperature dependence of the ISHE voltage signal (VISHE) also showed orientation-dependent behavior: while (001)-oriented samples followed a monotonic trend, (111)-oriented samples displayed a peak that shifted to higher temperatures with increasing tNiO, associated with the emergence of AF ordering. Moreover, (111)-oriented samples demonstrated notable spin current amplification at room temperature, peaking at tNiO ≈ 1 nm before decaying quasi-exponentially, indicative of spin diffusion-mediated conduction. Although the spin diffusion length in (111)-oriented samples was roughly double that of their (001)-oriented counterparts, it was still too short to be explained by angular momentum transport by mobile antiferromagnons through NiO. Instead, these findings point to a mechanism involving magnetic correlations and short-range thermal magnons. The superior spin transport properties and the enhanced spin conduction in (111)-oriented samples are primarily attributed to a synergistic combination of interfacial and dynamic effects, a more favorable Néel vector alignment and distinct interface symmetry, which can enhance spin-Hall effects or enable different spin textures. Overall, this study underscores the pivotal role of the Néel vector and crystallographic orientation in AF spin transport, providing valuable insights for the design and optimization of spintronic devices.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cryo-focused ion beam-induced deposition of tungsten–carbon nanostructures using a thermoelectric plate

  • Orús, Pablo
  • Sigloch, Fabian
  • Sangiao, Soraya
  • Teresa, José María de
This article belongs to the Special Issue Nanoscale Assembly and Integration for Applications., Focused Ion Beam-Induced Deposition (FIBID) is a single-step nanopatterning technique that applies a focused beam of ions to induce the decomposition of a gaseous precursor. The processing rate of FIBID increases by two orders of magnitude when the process is performed at cryogenic temperatures (Cryo-FIBID): the precursor forms a condensed layer on the surface of the cooled substrate, greatly enhancing the amount of material available for decomposition. Cryo-FIBID has been achieved so far by making use of liquid nitrogen-based cooling circuits, which require the passage of a flowing gas as a cooling agent. Here, the Cryo-FIBID of the W(CO)6 precursor is performed using a coolant-free thermoelectric plate utilizing the Peltier effect. Performed at −60 ∘C, the procedure yields a W–C-based material with structural and electrical properties comparable to those of its counterpart grown in coolant-based Cryo-FIBID. The use of the thermoelectric plate significantly reduces the vibrations and sample drift induced by the flow of passing coolant gas and allows for the fabrication of similar nanostructures. In summary, the reported process represents a further step towards the practical implementation of the Cryo-FIBID technique, and it will facilitate its use by a broader research community., This research was funded by European Union’s Horizon 2020 research and innovation program with grant number 892427. This project was supported by the Spanish Ministry of Science through grant numbers MAT2017-82970-C2-1-R, MAT2017-82970-C2-2-R and PID2020-112914RB-100, including FEDER funding, from CSIC through project PIE202060E187, and by Gobierno de Aragón through the grant number E13_20R with European Social Fund (Construyendo Europa desde Aragón). The following networking projects are acknowledged: Spanish Nanolito (MAT2018-102627-T) and COST-FIT4NANO (action CA19140)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly-efficient growth of cobalt nanostructures using focused ion beam induced deposition under cryogenic conditions: application to electrical contacts on graphene, magnetism and hard masking

  • Salvador-Porroche, Alba
  • Sangiao, Soraya
  • Magén, César
  • Barrado, Mariano
  • Philipp, Patrick
  • Belotcerkovtceva, Daria
  • Venkata Kamalakar, M.
  • Cea, Pilar
  • Teresa, José María de
Emergent technologies are required in the field of nanoelectronics for improved contacts and interconnects at nano and micro-scale. In this work, we report a highly-efficient nanolithography process for the growth of cobalt nanostructures requiring an ultra-low charge dose (15 μC cm−2, unprecedented in single-step charge-based nanopatterning). This resist-free process consists in the condensation of a ∼28 nm-thick Co2(CO)8 layer on a substrate held at −100 °C, its irradiation with a Ga+ focused ion beam, and substrate heating up to room temperature. The resulting cobalt-based deposits exhibit sub-100 nm lateral resolution, display metallic behaviour (room-temperature resistivity of 200 μΩ cm), present ferromagnetic properties (magnetization at room temperature of 400 emu cm−3) and can be grown in large areas. To put these results in perspective, similar properties can be achieved by room-temperature focused ion beam induced deposition and the same precursor only if a 2 × 103 times higher charge dose is used. We demonstrate the application of such an ultra-fast growth process to directly create electrical contacts onto graphene ribbons, opening the route for a broad application of this technology to any 2D material. In addition, the application of these cryo-deposits for hard masking is demonstrated, confirming its structural functionality., This project was supported by the Spanish Ministry of Science through the grant numbers PID2019-105881RB-I00, MAT2017-82970-C2-2-R and PID2020-112914RB-I00, including FEDER funding, from CSIC through projects PIE202060E187 and Research Platform PTI-001, and by Gobierno de Aragón through the grant number E31_20R with European Social Fund (Construyendo Europa desde Aragón). P. P. is grateful to the National Research Fund (FNR), Luxembourg (C17/MS/11682850/ULOWBEAM). M. V. K gratefully acknowledges funding from Swedish energy agency-Energimyndigheten (48698–1) and Swedish Research Council Formas (Grant no. 2019–01326). The following networking projects are acknowledged: Spanish Nanolito (MAT2018-102627-T) and COST-FIT4NANO (action CA19140). We thank preliminary tests and discussions with the master student Camilo Sánchez Velasquez (University of Zaragoza) and with Dr Pablo Orus (INMA). We acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza. Technical support by the LMA technicians at Universidad de Zaragoza is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic functionalization of scanning probes by focused electron beam induced deposition technology

  • Pablo-Navarro, Javier
  • Sangiao, Soraya
  • Magén, César
  • Teresa, José María de
This article belongs to the Special Issue Advances in Magnetic Force Microscopy., The fabrication of nanostructures with high resolution and precise control of the deposition site makes Focused Electron Beam Induced Deposition (FEBID) a unique nanolithography process. In the case of magnetic materials, apart from the FEBID potential in standard substrates for multiple applications in data storage and logic, the use of this technology for the growth of nanomagnets on different types of scanning probes opens new paths in magnetic sensing, becoming a benchmark for magnetic functionalization. This work reviews the recent advances in the integration of FEBID magnetic nanostructures onto cantilevers to produce advanced magnetic sensing devices with unprecedented performance., This research was funded by the Spanish Ministry of Economy and Competitiveness through the projects PID2020-112914RB-100, MAT2017-82970-C2-1-R, MAT2017-82970-C2-2-R and MAT2018-102627-T, BES-2015-072950, the Aragon Regional Government (Construyendo Europa desde Aragón) through the project E13_20R with European Social Fund funding. This work has received funding from the European’s Union Horizon 2020 research and innovation programme under Grant No. 823717-ESTEEM3., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spin to charge conversion in chemically deposited epitaxial La0.9MnO3 thin films capped with Pt

  • Martin Rio, Sergi
  • Pomar, Alberto
  • Frontera, Carlos
  • Wang, Hailin
  • Manzorro, Ramón
  • Magén, César
  • Balcells, Lluis
  • Mestres, Narcís
  • Martínez Perea, Benjamín
Spin to charge conversion process in a broad range of temperatures is studied in La0.92MnO3/Pt bilayers prepared by polymer-assisted deposition (PAD). It is shown that an excellent LMO/Pt interface can be obtained in spite of using ex situ deposition of the Pt layer. The values obtained for the effective spin-mixing conductance, g↑↓eff = 0.76 × 1015 cm−2, suggest that significant spin transport across the LMO/Pt interface could be achieved. Spin pumping experiments generate a transversal voltage signal VISHE, due to spin to charge conversion via inverse spin Hall effect, that has been detected down to about 100 K with values of the spin-Hall angle, θSH, of about 2.5%, slightly decreasing on reducing temperature in the analyzed temperature range. These results indicate that LMO is a promising perovskite building block for all-oxide multifunctional high-frequency spintronics devices and that PAD technique provides oxide epitaxial thin films of good quality adequate for spintronic applications., We acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through Severo Ochoa (CEX2019-000917-S), and SPINCURIOX (RTI2018-099960-BI00) and AMONANO (PID2020-112914RB-I00) projects co-financed by the European Regional Development Funds. AMONANO also received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement no. 823717-ESTEEM3. Hailin Wang acknowledges financial support from the China Scholarship Council (CSC)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct epitaxial growth of polar Hf0.5Zr0.5O2 films on corundum

  • Barriuso, Eduardo
  • Koutsogiannis, Panagiotis
  • Serrate, David
  • Herrero Martín, Javier
  • Jiménez, Ricardo
  • Magén, César
  • Algueró, Miguel
  • Algarabel, Pedro A.
  • Pardo, José A.
This article belongs to the Special Issue Pulsed Laser Deposited Nanostructures., Single-phase epitaxial Hf0.5Zr0.5O2 films with non-centrosymmetric orthorhombic structure have been grown directly on electrode-free corundum (α-Al2O3) substrates by pulsed laser deposition. A combination of high-resolution X-ray diffraction and X-ray absorption spectroscopy confirms the epitaxial growth of high-quality films belonging to the Pca21 space group, with [111] out-of-plane orientation. The surface of a 7-nm-thick sample exhibits an atomic step-terrace structure with a corrugation of the order of one atomic layer, as proved by atomic force microscopy. Scanning transmission electron microscopy reveals that it consists of grains with around 10 nm lateral size. The polar nature of this film has been corroborated by pyroelectric measurements. These results shed light on the mechanisms of the epitaxial stabilization of the ferroelectric phase of hafnia., We acknowledge the research projects MAT2017-88788-R, PID2019-107338RB-C64, and PID2020-112914RB-I00, funded by MCIN/AEI/10.13039/501100011033. This work has received funding from regional Gobierno de Aragón through projects E28_20R and E12_20R, including FEDER funding, and from the EU’s Horizon 2020 programme under the grant agreement No. 823717-ESTEEM3 and the Marie Skłodowska-Curie grant agreement No. 861153-MANIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-throughput direct writing of metallic micro- and nano-structures by focused Ga+beam irradiation of palladium acetate films

  • Salvador-Porroche, Alba
  • Herrer, Lucía
  • Sangiao, Soraya
  • Philipp, Patrick
  • Cea, Pilar
  • Teresa, José María de
Metallic nanopatterns are ubiquitous in applications that exploit the electrical conduction at the nanoscale, including interconnects, electrical nanocontacts, and small gaps between metallic pads. These metallic nanopatterns can be designed to show additional physical properties (optical transparency, plasmonic effects, ferromagnetism, superconductivity, heat evacuation, etc.). For these reasons, an intense search for novel lithography methods using uncomplicated processes represents a key on-going issue in the achievement of metallic nanopatterns with high resolution and high throughput. In this contribution, we introduce a simple methodology for the efficient decomposition of Pd3(OAc)6 spin-coated thin films by means of a focused Ga+ beam, which results in metallic-enriched Pd nanostructures. Remarkably, the usage of a charge dose as low as 30 μC/cm2 is sufficient to fabricate structures with a metallic Pd content above 50% (at.) exhibiting low electrical resistivity (70 μΩ·cm). Binary-collision-approximation simulations provide theoretical support to this experimental finding. Such notable behavior is used to provide three proof-of-concept applications: (i) creation of electrical contacts to nanowires, (ii) fabrication of small (40 nm) gaps between large metallic contact pads, and (iii) fabrication of large-area metallic meshes. The impact across several fields of the direct decomposition of spin-coated organometallic films by focused ion beams is discussed., Authors acknowledge grants PID2019-105881RB-I00 and PID2020-112914RB-I00, MAT2017-82970-C2-2-R (including FEDER funding), funded by MCIN/AEI/10.13039/501100011033, CSIC, through projects PIE202060E187 and Research Platform PTI-001 and also Gobierno de Aragón through the grant number E13_20R and E31_20R with the European Social Fund (Construyendo Europa desde Aragón). P.P. is grateful to the National Research Fund (FNR), Luxembourg (C17/MS/11682850/ULOWBEAM). The following networking projects are acknowledged: Spanish Nanolito (RED2018-102627-T), COST-FIT4NANO (action CA19140), and OsMolsys (RED2018-102833-T). Technical support by the LMA technicians at Universidad de Zaragoza is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Indium segregation in Gd5(Si, Ge)4 magnetocaloric materials

  • Belo, João Horta
  • Mudryk, Y.
  • Pereira, André M.
  • Oliveira, G.N.P.
  • Lopes, Armandina M. L.
  • Paudyal, Durga
  • Morellón, Luis
  • Algarabel, Pedro A.
  • Magén, César
  • Ibarra, M. Ricardo
  • Marcano, Noelia
  • Pecharsky, Vitalij K.
  • Araujo, João Pedro
Chemical substitution is one of the most efficient tools to tune and optimize magnetic and magnetocaloric properties of the giant magnetocaloric materials. In particular, Indium substitutions could be useful both for tuning properties of these interesting intermetallic materials and to unveil their local-scale behavior across the magnetostructural transition via hyperfine techniques. Hence, in order to investigate the effect of Indium additions on the crystal structure, micro-structure, magnetic and magnetocaloric properties, a series of In-containing samples derived from the base Gd5Si1.2Ge2.8 stoichiometry were prepared. The major findings are that while In is insoluble in the 5: 4 phase, it will instead promote the emergence of the impurity 5: 3 phase and segregates into this phase. Hence, In leads to major crystallographic changes, which enhance atomic disorder and disrupt the Si to Ge ratio in the 5: 4 phase. Subsequently, a higher 5: 4 unit cell volume and a lower magnetic ordering temperature are found in the In-substituted samples. Finally, the magnetocaloric properties of the In-substituted samples reveal a detrimental effect on the maximum magnetic entropy change., Work is partially supported by the projects POCI/CTM/61284/2004, PTDC/CTM-NAN/115125/2009, FEDER/POCTI n0155/94 from Fundacão para a Ciência ex Tecnologia (FCT), Portugal. A.M.P. thanks FCT for the Grant No. SFRH/BPD/63150/2009. J H Belo thanks FCT for the Grant SFRH/BD/88440/2012, the project PTDC/FISMAC/ 31302/2017 and his contract DL57/2016 reference SFRH-BPD-87430/2012. Work at IFIMUP is supported by the following funding projects: POCI-01-0145-FEDER-032527, POCI-01–0145-FEDER-029454 and CERN-FIS-PAR-0005-2017. Work at the INMA is supported by the Spanish Ministerio de Ciencia, Innovacion y Universidades through project MAT2017-82970-C2, PID2020-112914RB-I00 and Spanish DGA (grant no. E28−20R). The research at Ames Laboratory is supported by the Materials Sciences and Engineering Division, Office of Basic Energy Sciences of the U.S. Department of Energy (DOE). Ames Laboratory is operated for the U.S DOE by Iowa State University under Contract No. DE-AC02-07CH11358., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low-resistivity Pd nanopatterns created by a direct electron beam irradiation process free of post-treatment steps

  • Salvador-Porroche, Alba
  • Herrer, Lucía
  • Sangiao, Soraya
  • Teresa, José María de
  • Cea, Pilar
The ability to create metallic patterned nanostructures with excellent control of size, shape and spatial orientation is of utmost importance in the construction of next-generation electronic and optical devices as well as in other applications such as (bio)sensors, reactive surfaces for catalysis, etc. Moreover, development of simple, rapid and low-cost fabrication processes of metallic patterned nanostructures is a challenging issue for the incorporation of such devices in real market applications. In this contribution, a direct-write method that results in highly conducting palladium-based nanopatterned structures without the need of applying subsequent curing processes is presented. Spin-coated films of palladium acetate were irradiated with an electron beam to produce palladium nanodeposits (PdNDs) with controlled size, shape and height. The use of different electron doses was investigated and its influence on the PdNDs features determined, namely: (1) thickness of the deposits, (2) atomic percentage of palladium content, (3) oxidation state of palladium in the deposit, (4) morphology of the sample and grain size of the Pd nanocrystals and (5) resistivity. It has been probed that the use of high electron doses, 30000 μC cm−2 results in the lowest resistivity reported to date for PdNDs, namely 145 μΩ cm, which is only one order of magnitude higher than bulk palladium. This result paves the way for development of simplified lithography processes of nanostructured deposits avoiding subsequent post-treatment steps., This research was supported by the Spanish Ministry of Science through the grant numbers PID2019-105881RB-I00, MAT2017-82970-C2-2-R and PID2020-112914RB-I00 funded by MCIN/AEI/ 10.13039/501100011033, including FEDER funding, from CSIC through projects PIE202060E187 and Research Platform PTI-001, and by Gobierno de Aragón through the grant numbers LMP33-18, E12_20R and E31_20R with European Social Funds (Construyendo Europa desde Aragón). The following networking projects are acknowledged: Spanish Nanolito (RED2018-102627-T) COST-FIT4NANO (action CA19140) and OsMolsys (RED2018-102833-T). We acknowledge technical support by the LMA technicians at Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Superconducting materials and devices grown by focused ion and electron beam induced deposition

  • Orús, Pablo
  • Sigloch, Fabian
  • Sangiao, Soraya
  • Teresa, José María de
This article belongs to the Special Issue Current Review in Synthesis, Interfaces, and Nanostructures., Since its discovery in 1911, superconductivity has represented an equally inciting and fascinating field of study in several areas of physics and materials science, ranging from its most fundamental theoretical understanding, to its practical application in different areas of engineering. The fabrication of superconducting materials can be downsized to the nanoscale by means of Focused Ion/Electron Beam Induced Deposition: nanopatterning techniques that make use of a focused beam of ions or electrons to decompose a gaseous precursor in a single step. Overcoming the need to use a resist, these approaches allow for targeted, highly-flexible nanopatterning of nanostructures with lateral resolution in the range of 10 nm to 30 nm. In this review, the fundamentals of these nanofabrication techniques are presented, followed by a literature revision on the published work that makes use of them to grow superconducting materials, the most remarkable of which are based on tungsten, niobium, molybdenum, carbon, and lead. Several examples of the application of these materials to functional devices are presented, related to the superconducting proximity effect, vortex dynamics, electric-field effect, and to the nanofabrication of Josephson junctions and nanoSQUIDs. Owing to the patterning flexibility they offer, both of these techniques represent a powerful and convenient approach towards both fundamental and applied research in superconductivity., This research was supported by the European Commission under H2020 FET Open grant ’FIBsuperProbes’ (number 892427), the grant PID2020-112914RB-I00 funded by MCIN/AEI/ 10.13039/501100011033, from CSIC through projects PIE202060E187 and Research Platform PTI-001, and by Gobierno de Aragón through the grant E13_20R with European Social Funds (Construyendo Europa desde Aragón). The following networking projects are acknowledged: Spanish Nanolito (RED2018-102627-T) and COST-FIT4NANO (action CA19140)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Superconducting W-C nanopillars fabricated by Ga+ focused ion beam induced deposition

  • Orús, Pablo
  • Sigloch, Fabian
  • Sangiao, Soraya
  • Teresa, José María de
Ga+ Focused Ion Beam Induced Deposition (FIBID) is a highly flexible, single-step nanopatterning technique that makes use of a focused beam of Ga+ ions to locally induce the decomposition of a gaseous precursor material. In combination with the W(CO)6 precursor, Ga+ FIBID is known to yield a W–C compound that is superconducting below 4.7 ​K. While most reports on Ga+ FIBID-grown W–C focus on in-plane patterning, we demonstrate here that growth along the vertical direction may also be achieved by successively stacking a series of individual patterns that get deposited on top of each other. The nanopillars obtained following this procedure reach up to 10 ​μm in height, and have an aspect ratio of around 50. They exhibit a 68% of metallic W in terms of atomic content, higher than the 40% detected in their in-plane counterparts, while maintaining the superconducting properties. This approach also opens up the possibility of tuning their height and growth angle with respect to the substrate, exhibiting potential applicability in the design of 3D superconducting devices., This research was supported by the European Commission under H2020 FET Open grant ’FIBsuperProbes' (number 892427), the grant PID2020-112914RB-I00 funded by MCIN/AEI/10.13039/501100011033, from CSIC through projects PIE202060E187 and Research Platform PTI-001, and by Gobierno de Aragón through the grant E13_20R with European Social Funds (Construyendo Europa desde Aragón)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Transition of laser-induced terahertz spin currents from torque- to conduction-electron-mediated transport

  • Jiménez-Cavero, Pilar
  • Gueckstock, Oliver
  • Nádvorník, Lukáš
  • Lucas, Irene
  • Seifert, Tom S.
  • Wolf, Martin
  • Rouzegar, Reza
  • Brouwer, Piet W.
  • Becker, Sven
  • Jakob, Gerhard
  • Kläui, Mathias
  • Guo, Chenyang
  • Wan, Chenyang
  • Han, Xiufeng
  • Jin, Zuanming
  • Zhao, Hui
  • Wu, Di
  • Morellón, Luis
  • Kampfrath, Tobias
Spin transport is crucial for future spintronic devices operating at bandwidths up to the terahertz range. In F|N thin-film stacks made of a ferromagnetic/ferrimagnetic layer F and a normal-metal layer N, spin transport is mediated by (1) spin-polarized conduction electrons and/or (2) torque between electron spins. To identify a crossover from (1) to (2), we study laser-driven spin currents in F|Pt stacks where F consists of model materials with different degrees of electrical conductivity. For the magnetic insulators yttrium iron garnet, gadolinium iron garnet (GIG) and γ−Fe2O3, identical dynamics is observed. It arises from the terahertz interfacial spin Seebeck effect (SSE), is fully determined by the relaxation of the electrons in the metal layer, and provides a rough estimate of the spin-mixing conductance of the GIG/Pt and γ−Fe2O3/Pt interfaces. Remarkably, in the half-metallic ferrimagnet Fe3O4 (magnetite), our measurements reveal two spin-current components with opposite direction. The slower, positive component exhibits SSE dynamics and is assigned to torque-type magnon excitation of the A- and B-spin sublattices of Fe3O4. The faster, negative component arises from the pyrospintronic effect and can consistently be assigned to ultrafast demagnetization of minority-spin hopping electrons. This observation supports the magneto-electronic model of Fe3O4. In general, our results provide a route to the contact-free separation of torque- and conduction-electron-mediated spin currents., The authors acknowledge funding by the German Research Foundation through the collaborative research centers SFB TRR 227 “Ultrafast spin dynamics” (Project ID 328545488, projects A05, B02, and B03), SFB TRR 173 “Spin + X” (Project No. 358671374, projects A01 and B02), the European Union H2020 program through the project CoG TERAMAG(GrantNo.681917), the Spanish Ministry of Science and Innovation (Project No. PID2020-112914RB-I00), the National Natural Science Foundation of China (Grants No. 61988102 and No. 61975110), and the Czech Science Foundation through Project GA CR/Grant No. 21-28876J. P.J.-C. acknowledges the Spanish MECD for support through the FPU program (References No. FPU014/02546 and No. EST17/00382.), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct-write of tungsten-carbide nanoSQUIDs based on focused ion beam induced deposition

  • Sigloch, Fabian
  • Sangiao, Soraya
  • Orús, Pablo
  • Teresa, José María de
NanoSQUIDs are quantum sensors that excel in detecting a small change in magnetic flux with high sensitivity and high spatial resolution. Here, we employ resist-free direct-write Ga+ Focused Ion Beam Induced Deposition (FIBID) techniques to grow W–C nanoSQUIDs, and we investigate their electrical response to changes in the magnetic flux. Remarkably, FIBID allows the fast (3 min) growth of 700 nm × 300 nm nanoSQUIDs based on narrow nanobridges (50 nm wide) that act as Josephson junctions. Albeit the SQUIDs exhibit a comparatively low modulation depth and obtain a high inductance, the observed transfer coefficient (output voltage to magnetic flux change) is comparable to other SQUIDs (up to 1300 μV/Φ0), which correlates with the high resistivity of W–C in the normal state. We discuss here the potential of this approach to reduce the active area of the nanoSQUIDs to gain spatial resolution as well as their integration on cantilevers for scanning-SQUID applications., This research was supported by the European Commission under H2020 FET Open grant ‘FIBsuperProbes’ (number 892427), by the Spanish Ministry of Science through the grant PID2020-112914RB-I00, from CSIC through projects PIE202060E187 and Research Platform PTI-001, and by Gobierno de Aragón through the grant E13_20R with European Social Funds (Construyendo Europa desde Aragón). The following networking projects are acknowledged: Spanish Nanolito (RED2018-102627-T) and COST-FIT4NANO (action CA19140)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spin glass state in strained La2/3Ca1/3MnO3 thin films

  • Lucas, Irene
  • Marcano, Noelia
  • Prokscha, Thomas
  • Magén, César
  • Corcuera, Rubén
  • Morellón, Luis
  • Teresa, José María de
  • Ibarra, M. Ricardo
  • Algarabel, Pedro A.
This article belongs to the Section Synthesis, Interfaces and Nanostructures., Epitaxial strain modifies the physical properties of thin films deposited on single-crystal substrates. In a previous work, we demonstrated that in the case of La2/3Ca1/3MnO3 thin films the strain induced by the substrate can produce the segregation of a non-ferromagnetic layer (NFL) at the top surface of ferromagnetic epitaxial La2/3Ca1/3MnO3 for a critical value of the tetragonality τ, defined as τ = |c − a|a, of τC ≈ 0.024. Although preliminary analysis suggested its antiferromagnetic nature, to date a complete characterization of the magnetic state of such an NFL has not been performed. Here, we present a comprehensive magnetic characterization of the strain-induced segregated NFL. The field-cooled magnetic hysteresis loops exhibit an exchange bias mechanism below T ≈ 80 K, which is well below the Curie temperature of the ferromagnetic La2/3Ca1/3MnO3 layer. The exchange bias and coercive fields decay exponentially with temperature, which is commonly accepted to describe spin-glass (SG) behavior. The signatures of slow dynamics were confirmed by slow spin relaxation over a wide temperature regime. Low-energy muon spectroscopy experiments directly evidence the slowing down of the magnetic moments below ~100 K in the NFL. The experimental results indicate the SG nature of the NFL. This SG state can be understood within the context of the competing ferromagnetic and antiferromagnetic interactions of similar energies., This research was funded by Spanish MCIN/AEI/10.13039/501100011033, grant number PID2020-112914RB-100, the Aragón Regional government grants number E13_17R, E13_20R and E28_20R, and the Centro Universitario de la Defensa and the University of Zaragoza through projects Nos. UZCUD2016-CIE-02 and UZCUD2017-CIE-02., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low-resistivity, high-resolution W-C electrical contacts fabricated by direct-write focused electron beam induced deposition, Low-resistivity, high-resolution W-C electrical contacts fabricated by direct-write focused electron beam induced deposition [version 1; peer review: 2 approved]

  • Orús, Pablo
  • Sigloch, Fabian
  • Sangiao, Soraya
  • Teresa, José María de
[Background]: The use of a focused ion beam to decompose a precursor gas and produce a metallic deposit is a widespread nanolithographic technique named focused ion beam induced deposition (FIBID). However, such an approach is unsuitable if the sample under study is sensitive to the somewhat aggressive exposure to the ion beam, which induces the effects of surface amorphization, local milling, and ion implantation, among others. An alternative strategy is that of focused electron beam induced deposition (FEBID), which makes use of a focused electron beam instead, and in general yields deposits with much lower metallic content than their FIBID counterparts., [Methods]: In this work, we optimize the deposition of tungsten-carbon (W-C) nanowires by FEBID to be used as electrical contacts by assessing the impact of the deposition parameters during growth, evaluating their chemical composition, and investigating their electrical response., [Results]: Under the optimized irradiation conditions, the samples exhibit a metallic content high enough for them to be utilized for this purpose, showing a room-temperature resistivity of 550 μΩ cm and maintaining their conducting properties down to 2 K. The lateral resolution of such FEBID W-C metallic nanowires is 45 nm., [Conclusions]: The presented optimized procedure may prove a valuable tool for the fabrication of contacts on samples where the FIBID approach is not advised., This research was financially supported by the European Union’s Horizon 2020 research and innovation programme under the grant agreement No [892427](Focused Ion Beam fabrication of superconducting scanning Probes [FIBsuperProbes])., the grant PID2020-112914RB-I00 funded by MCIN/AEI/10.13039/501100011033 (recipient: J.M. De Teresa), from CSIC through projects PIE202060E187 (recipient: J.M. De Teresa) and Research Platform PTI-001 (recipient: J. García-Ripoll), and by Gobierno de Aragón through the grant E13\_20R (with European Social Funds (Construyendo Europa desde Aragón) (recipient: J.M. De Teresa)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Nanofabrication of metallic Pd deposits by focused Ga+ beam irradiations on Pd3(OAc)6 spin-coated films for a wide variety of applications

  • Salvador-Porroche, Alba
  • Herrer, Lucía
  • Sangiao, Soraya
  • Philipp, Patrick
  • Cea, Pilar
  • Teresa, José María de
Resumen del trabajo presentado a la XIII Jornadas de Jóvenes Investigadores en Física Atómica y Molecular, celebrada en la Universidad de Santiago de Compostela del 15 al 17 de marzo de 2022., Authors acknowledge grants PID2019-105881RB-I00 and PID2020-112914RB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and PIE 202060E187 funded by CSIC., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanoscale direct-write fabrication of superconducting devices for application in quantum technologies

  • Teresa, José María de
In this Perspective article, we evaluate the current state of research on the use of focused electron and ion beams to directly fabricate nanoscale superconducting devices with application in quantum technologies. First, the article introduces the main superconducting devices and their fabrication by means of standard lithography techniques such as optical lithography and electron beam lithography. Then, focused ion beam patterning of superconductors through milling or irradiation is shown, as well as the growth of superconducting devices by means of focused electron and ion beam induced deposition. We suggest that the key benefits of these resist-free direct-growth techniques for quantum technologies include the ability to make electrical nanocontacts and circuit edit, fabrication of high-resolution superconducting resonators, creation of Josephson junctions and superconducting quantum interference device (SQUIDs) for on-tip sensors, patterning of high-Tc SQUIDs and other superconducting circuits, and the exploration of fluxtronics and topological superconductivity., The research of our group on this topic has benefited from the following sponsors and grants: the European Commission under H2020 FET Open Grant 'FIBsuperProbes' (No. 892427), the Spanish Ministry of Science through the Grant PID2020-112914RB-I00, CSIC through Projects PIE202060E187 and Research Platform PTI-001, Gobierno de Aragón through the grant E13_20R with European Social Funds (Construyendo Europa desde Aragón). The following networking Projects are acknowledged: Spanish Nanolito (RED2018-102627-T) and COST-FIT4NANO (action CA19140)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improved polarization-retention-endurance in Hf0.5Zr0.5O2 films by ZrO2 capping via electrostatic effects

  • Song, Tingfeng
  • Koutsogiannis, Panagiotis
  • Magén, César
  • Pardo, José A.
  • Sánchez Barrera, Florencio
  • Fina, Ignasi
Ferroelectric hafnia is one of the most promising materials for next generation of non-volatile memory devices. Several strategies have demonstrated to be of interest to improve its functional properties. Interface engineering, realized by the introduction of additional layer in the capacitor structure, is demonstrated as a promising strategy. However, interface layers can have multiple implications, such as changes in the chemistry of the interfaces and an increase of depolarization field, whose effects are difficult to discriminate. The role of HfO2 and ZrO2 capping is explored on polarization, retention, endurance, and leakage properties of Hf0.5Zr0.5O2 epitaxial films. In HfO2 capped films, lower polarization is observed, and endurance and retention are also comparably worse than in ZrO2 capped films. Complementary under illumination ferroelectric characterization and capacitance measurements indicate a reduction of defects and interface capacitance contribution in ZrO2 capped films. For both cappings, the interfaces with the Hf0.5Zr0.5O2 layer are shown to be compositionally sharp and the phase of Hf0.5Zr0.5O2 (HZO) grains is replicated on the capping layer, indicating that electrostatic effects prevail and that the use of interface layers with high permittivity, here ZrO2, is crucial to favor good functional properties., Financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/ 10.13039/501100011033), through the Severo Ochoa FUNFUTURE (CEX2019-000917-S), PID2020-112548RB-I00, PID2020-112914RB-I00 and PID2019-107727RB-I00 projects and from Generalitat de Catalunya (2021 SGR 00804) are acknowledged. The authors also acknowledge project TED2021-130453B-C21, funded by MCIN/AEI/10.13039/501100011033 and European Union NextGeneration EU/PRTR, and EU Horizon 2020 programme under the Marie Skłodowska-Curie grant agreement No. 861153 MANIC. T.S. is financially supported by China Scholarship Council (CSC) with No. 201807000104., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spin-to-charge conversion in all-oxide La2/3Sr1/3MnO3/SrIrO3 heterostructures

  • Martin Rio, Sergi
  • Konstantinovic, Zorica
  • Pomar, Alberto
  • Balcells, Lluis
  • Pablo-Navarro, Javier
  • Ibarra, M. Ricardo
  • Magén, César
  • Mestres, Narcís
  • Frontera, Carlos
  • Martínez Perea, Benjamín
Spin injection and spin-charge conversion processes in all-oxide La2/3Sr1/3MnO3/SrIrO3 (LSMO/SIO) heterostructures with different SIO layer thickness and interfacial features have been studied. Ferromagnetic resonance (FMR) technique has been used to generate pure spin currents by spin pumping (SP) in ferromagnetic (FM) half-metallic LSMO. The change of the resonance linewidth in bare LSMO layers and LSMO/SIO heterostructures suggests a successful spin injection into the SIO layers. However, low values of the spin mixing conductance, compared to more traditional permalloy (Py)/Pt or yttrium iron garnet (YIG)/Pt systems, are found. A thorough analysis of the interfaces by high-resolution scanning transmission electron microscopy (HR-STEM) imaging suggests that they are structurally clean and atomic sharp, but a compositional analysis by energy-dispersive X-ray spectroscopy (EDS) reveals the interdiffusion of La, Ir, and Mn atomic species in the first atomic layers close to the interface. Inverse spin Hall effect (ISHE) measurements evidence that interfacial features play a very relevant role in controlling the effectiveness of the spin injection process and low transversal ISHE voltage signals are detected. In addition, it is found that larger voltage signals are detected for the lowest SIO layer thickness highlighting the role of the spin diffusion length (λsd)/SIO layer thickness ratio. The values of ISHE voltage are rather low but allow us to determine the spin Hall angle of SIO (θSH ≈ 1.12% at T = 250 K), which is remarkably similar to that obtained for the well-known Py/Pt system, therefore suggesting that SIO could be a promising spin-Hall material., This work has received funding from the “Spanish ministry of Science and Innovation” through “Severo Ochoa” (CEX2019-000917-S), “OXISOT” (PID2021-128410OB-I00), and PID2020-112914RB-I00. This work has also received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement no. 823717-ESTEEM3, and from the Gobierno Regional de Aragón through Project E13_23R., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of Twin's Landscape on the Magnetic Damping of La2/3Sr1/3MnO3 Thin Films

  • Chen, Shoulong
  • Pomar, Alberto
  • Balcells, Lluis
  • Frontera, Carlos
  • Mestres, Narcís
  • Martínez Perea, Benjamín
Understanding the origin and mechanisms of magnetic damping in complex oxide materials is crucial for optimizing spin dynamics and tailoring their properties for specific spintronic applications. Ferromagnetic resonance spectroscopy (FMR) technique has been used to investigate the magnetic damping of multiple La2/3Sr1/3MnO3 (LSMO) epitaxial thin films with similar thickness and identical DC magnetic properties. However, the dynamic magnetic properties exhibit noticeable variations among samples. Microstructural analyses using X-ray diffraction (XRD) and atomic force microscopy (AFM), confirm that the samples are structurally identical, except for minute differences in the miscut angles of the substrates. Nevertheless, when examining the samples using backscattered electron (BSE) images in scanning electron microscopy (SEM), significant disparities in the twin distribution are observed. These variations in the twin distribution directly correlate with the observed differences in the damping values. A careful image analysis of BSE images allows to demonstrate that the increase of damping is due to the pinning of the magnetization in the twin boundaries., This work has received fundings from the “Spanish ministry of Science and Innovation” through “Severo Ochoa” (CEX2019-000917-S), “OXISOT” (PID2021-128410OB-I00) and PID2020-112914RB-I00, co-financed by the European Regional Development Fund. Shoulong Chen acknowledges financial support from the China Scholarship Council (CSC). This work has been performed in the framework of the Ph.D. program in Materials Science of the Universitat Autònoma de Barcelona (UAB), through the CSC/UAB Joint Scholarship., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ion-induced lateral damage in the focused ion beam patterning of topological insulator Bi2Se3 thin films

  • Gracia-Abad, Rubén
  • Sangiao, Soraya
  • Kumar Chaluvadi, Sandeep
  • Orgiani, Pasquale
  • Teresa, José María de
This article belongs to the Topic Advances in Functional Thin Films., Focused Ion Beam patterning has become a widely applied technique in the last few decades in the micro- and nanofabrication of quantum materials, representing an important advantage in terms of resolution and versatility. However, ion irradiation can trigger undesired effects on the target material, most of them related to the damage created by the impinging ions that can severely affect the crystallinity of the sample, compromising the application of Focused Ion Beam to the fabrication of micro- and nanosized systems. We focus here on the case of Bi2Se3, a topological material whose unique properties rely on its crystallinity. In order to study the effects of ion irradiation on the structure of Bi2Se3, we irradiated with Ga+ ions the full width of Hall-bar devices made from thin films of this material, with the purpose of inducing changes in the electrical resistance and characterizing the damage created during the process. The results indicate that a relatively high ion dose is necessary to introduce significant changes in the conduction. This ion dose creates medium-range lateral damage in the structure, manifested through the formation of an amorphous region that can extend laterally up to few hundreds of nanometers beyond the irradiated area. This amorphous material is no longer expected to behave as intrinsic Bi2Se3, indicating a spatial limitation for the devices fabricated through this technique., The financial support of the Gobierno de Aragón is acknowledged through a doctoral fellowship (R.G.A) and through the grant E13-20R, with European Social Funds (Construyendo Europa desde Aragón). The authors acknowledge support from networks COST FIT4NANO and CSIC Research Platform PTI-001, and from MCIN/AEI/10.13039/501100011033 through the grant PID2020-112914RB-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering polar distortions in multiferroic Sr1−xBaxMnO3−δ thin films

  • Koutsogiannis, Panagiotis
  • Algarabel, Pedro A.
  • Pardo, José A.
  • Magén, César
The physical properties of perovskite oxide thin films are governed by the subtle interplay between chemical composition and crystal symmetry variations, which can be altered by epitaxial growth. In the case of perovskite-type multiferroic thin films, precise control of stoichiometry and epitaxial strain allows for gaining control over the ferroic properties through selective crystal distortions. Here, we demonstrate the chemical tailoring of the polar atomic displacements by tuning the stoichiometry of multiferroic Sr1−xBaxMnO3−δ (0 ≤ x ≤ 0.5) epitaxial thin films. A combination of x-ray diffraction and aberration-corrected scanning transmission electron microscopy enables unraveling the local polarization orientation at the nanoscale as a function of the film’s composition and induced crystalline structure. We demonstrate experimentally that the orientation of polarization is intimately linked to the Ba doping and O stoichiometry of the films and, with the biaxial strain induced by the substrate, it can be tuned either in-plane or out-of-plane with respect to the substrate by the appropriate choice of the post-growth annealing temperature and O2 atmosphere. This chemistry-mediated engineering of the polarization orientation of oxide thin films opens new venues for the design of functional multiferroic architectures and the exploration of novel physics and applications of ferroelectric textures with exotic topological properties., We acknowledge the research Project No. PID2020-112914RB-I00 funded by Grant No. MCIN/AEI/10.13039/501100011033. This work was funded from Regional Gobierno de Aragón through Project Nos. E13_23R and E28_23R, including FEDER funding and from the EU Horizon 2020 programme under the Marie Skłodowska-Curie Grant Agreement No. 861153 MANIC, and under the Grant Agreement No. 823717-ESTEEM3., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Focused helium ion and electron beam-induced deposition of organometallic tips for dynamic atomic force microscopy of biomolecules in liquid

  • Allen, Frances I.
  • Teresa, José María de
  • Onoa, Bibiana
We demonstrate the fabrication of sharp nanopillars of high aspect ratio onto specialized atomic force microscopy (AFM) microcantilevers and their use for high-speed AFM of DNA and nucleoproteins in liquid. The fabrication technique uses localized charged-particle-induced deposition with either a focused beam of helium ions or electrons in a helium ion microscope (HIM) or scanning electron microscope (SEM). This approach enables customized growth onto delicate substrates with nanometer-scale placement precision and in situ imaging of the final tip structures using the HIM or SEM. Tip radii of <10 nm are obtained and the underlying microcantilever remains intact. Instead of the more commonly used organic precursors employed for bio-AFM applications, we use an organometallic precursor (tungsten hexacarbonyl) resulting in tungsten-containing tips. Transmission electron microscopy reveals a thin layer of carbon on the tips. The interaction of the new tips with biological specimens is therefore likely very similar to that of standard carbonaceous tips, with the added benefit of robustness. A further advantage of the organometallic tips is that compared to carbonaceous tips they better withstand UV–ozone cleaning treatments to remove residual organic contaminants between experiments, which are inevitable during the scanning of soft biomolecules in liquid. Our tips can also be grown onto the blunted tips of previously used cantilevers, thus providing a means to recycle specialized cantilevers and restore their performance to the original manufacturer specifications. Finally, a focused helium ion beam milling technique to reduce the tip radii and thus further improve lateral spatial resolution in the AFM scans is demonstrated., TEM characterization at the Molecular Foundry at Lawrence Berkeley National Laboratory was supported by the Office of Science, Office of Basic Energy Sciences, of the U.S. Department of Energy under Contract no. DE-AC02-05CH11231. B.O. acknowledges financial support from the Howard Hughes Medical Institute. J.M.D.T. acknowledges financial support from grants PID2020-112914RB-I00 and PDC2021-120852-C21 funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR, and from grant E13_23R funded by Gobierno de Aragón., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gas-phase synthesis of iron silicide nanostructures using a single-source precursor: Comparing direct-write processing and thermal conversion

  • Jungwirth, Felix
  • Salvador-Porroche, Alba
  • Porrati, Fabrizio
  • Jochmann, Nicolas P.
  • Knez, Daniel
  • Huth, Michael
  • Gràcia Tortadès, Isabel
  • Cané, Carles
  • Cea, Pilar
  • Teresa, José María de
  • Barth, Sven
The investigation of precursor classes for the fabrication of nanostructures is of specific interest for maskless fabrication and direct nanoprinting. In this study, the differences in material composition depending on the employed process are illustrated for focused-ion-beam- and focused-electron-beam-induced deposition (FIBID/FEBID) and compared to the thermal decomposition in chemical vapor deposition (CVD). This article reports on specific differences in the deposit composition and microstructure when the (H3Si)2Fe(CO)4 precursor is converted into an inorganic material. Maximum metal/metalloid contents of up to 90 at. % are obtained in FIBID deposits and higher than 90 at. % in CVD films, while FEBID with the same precursor provides material containing less than 45 at. % total metal/metalloid content. Moreover, the Fe:Si ratio is retained well in FEBID and CVD processes, but FIBID using Ga+ ions liberates more than 50% of the initial Si provided by the precursor. This suggests that precursors for FIBID processes targeting binary materials should include multiple bonding such as bridging positions for nonmetals. In addition, an in situ method for investigations of supporting thermal effects of precursor fragmentation during the direct-writing processes is presented, and the applicability of the precursor for nanoscale 3D FEBID writing is demonstrated., S.B. acknowledges funding by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) in the Heisenberg Programme (BA 6595/1-1) and through grants BA 6595/2-2 and BA 6595/5-1. M.H. thanks the Deutsche Forschungsgemeinschaft for financial support through grant HU 752/16-1. D.K. acknowledges funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement no. 823717-ESTEEM3. In addition, S.B. thanks Prof. A. Terfort and Prof. M. Wagner for their support at Goethe University Frankfurt. The work was also supported in part by the COST Action COST-FIT4NANO (action CA19140) by providing funding for a STSM of A.S.-P. I.G. and C.C. acknowledge funding by the Spanish Ministry of Science and Innovation via Grant PID2019-107697RB-C42 (AEI/FEDER, EU). J.M.D.T. acknowledges financial support by grant PID2020-112914RB-I00 funded by MCIN/AEI/10.13039/501100011033 and Gobierno de Aragón via grant E13_23R with European Social Funds (Construyendo Europa desde Aragón). A.S.-P. and P.C. are grateful for financial assistance in the framework of the projects PID2019-105881RB-I00 and TED2021-131318B-I00 funded by MCIN/AEI/10.13039/501100011033 and European Union “NextGenerationEU”/PRTR as well as Gobierno de Aragón through the grant E31_23R with European Social Funds (Construyendo Europa desde Aragón). This work was conducted within the Frankfurt Center for Electron Microscopy (FCEM). Technical support by the LMA technicians at Universidad de Zaragoza is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spatially selective crystallization of ferroelectric Hf0.5Zr0.5O2 films induced by sub-nanosecond laser annealing

  • Frechilla, Alejandro
  • Napari, Mari
  • Strkalj, Nives
  • Barriuso, Eduardo
  • Niang, Kham
  • Hellenbrand, Markus
  • Štrichovanec, Pavel
  • Simanjuntak, Firman Mangasa
  • Antorrena, Guillermo
  • Flewitt, Andrew
  • Magén, César
  • Fuente, Germán F. de la
  • MacManus-Driscoll, Judith L.
  • Angurel, Luis A.
  • Pardo, José A.
In this work we study the sub-nanosecond laser-induced crystallization of 10 nm-thick atomic layer deposited amorphous Hf0.5Zr0.5O2 (HZO) films in an air atmosphere. We used an infrared laser with 1064 nm wavelength and 800 ps pulses to anneal TiN/HZO/TiN capacitors by scanning an 80 μm-diameter spot along their top surface in a controlled way. The laser annealing process was optimised in terms of fluence to achieve the complete crystallization of HZO into a non-monoclinic polymorph, as demonstrated by X-ray diffraction and transmission electron microscopy. Piezoresponse force microscopy and polarization-field loops confirm that the optimal as-annealed HZO films are piezoelectric and ferroelectric from the first cycle on. Spatial selectivity was accomplished by scanning the laser on selected areas of the samples. Micro-diffraction experiments show that the transition between the crystallized and the amorphous region is abrupt within a distance of several hundred µm., We acknowledge financial support from Spanish Agencia Estatal de Investigación through grants PID2020-112914RB-I00 and PID2020-113034RB-I00 funded by MCIN/AEI/10.13039/501100011033, and from Gobierno de Aragón (research groups T54_23R and E28_23R). A. F. acknowledges support of the Gobierno de Aragón through their predoctoral contracts programme. M. N. acknowledges EPSRC grant EP/P027032/1. The authors acknowledge the use of instrumentation as well as the technical advice provided by the Spanish National Facility ELECMI ICTS, node «Laboratorio de Microscopías Avanzadas (LMA)» at «Universidad de Zaragoza». N. S. acknowledges the Swiss National Science Foundation (grant No. P2EZP2-199913) and the ERC grant EU-H2020-ERC-ADG # 882929, EROS. M. H. gratefully acknowledges funding by the EPSRC and U.S. National Science Foundation with grant EP/T012218/1-ECCS-EPSRC. J.L.M-D. thanks the ERC grant EU-H2020-ERC-ADG # 882929, EROS, and the Royal Academy of Engineering, grant CIET1819_24., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Atomic-scale characterization of 180° conductive domain walls in PbZr0.1Ti0.9O3

  • Koutsogiannis, Panagiotis
  • Risch, Felix
  • Pardo, José A.
  • Stolichnov, Igor
  • Magén, César
Conductive domain walls (DWs) in ferroic materials have emerged as promising candidates for applications in nanoelectronics due to their unique properties such as high conductivity and nonvolatility. In this study, we investigate the atomic structure and conductivity of nominally neutral 180° DWs artificially created in an epitaxial thin film of tetragonal PbZr0.1Ti0.9O3. Using piezoresponse force microscopy and scanning transmission electron microscopy, we elucidate the complex structure of these 180° DWs and their coupling with ferroelastic domains, revealing that they exhibit a complex structure due to the strain-mediated interplay with the ferroelastic domains. Our results demonstrate that the 180° DWs conductivity is associated with the emergence of polar discontinuities, including the formation of tail-to-tail charged segments, which has been further confirmed by electron energy loss spectroscopy. Additionally, we investigated the long-term performance of these domain boundaries, demonstrating their unique mobility and structural stability. Our findings provide insights into the atomic-scale mechanisms that turn nominally neutral DWs into highly conductive channels, paving the way for their use in advanced nanoelectronic devices., The authors acknowledge Research Projects PID2020-112914RB-I00 and PID2023-147211OB-C22 funded by Grant MCIN/AEI/10.13039/501100011033. This work was funded by Regional Gobierno de Aragon through Projects E13_23R and E28_23R, including FEDER funding and from the EU Horizon 2020 program under the Marie Skłodowska-Curie Grant Agreement 861153 MANIC. We also are thankful for Grant CEX2023-001286-S supported by MICIU/AEI/10.13039/501100011033 Severo Ochoa action. The authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas (LMA)” at “Universidad de Zaragoza., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

FIB-fabrication of superconducting devices based on Bi2Se3 junctions

  • Gracia-Abad, Rubén
  • Sangiao, Soraya
  • Balakrishnan, Geetha
  • Teresa, José María de
All data analyzed and presented in the current study are available from the corresponding authors on reasonable request., Recent advances in quantum technologies are highly influencing the current technological scenario. Hybrid devices combining superconductors and topological insulators represent an excellent opportunity to study the topological superconducting phase, which offers interesting features that might have significant implications in the development of quantum sensing and quantum computing. Furthermore, focused ion beam techniques, whose versatility enables to create sophisticated devices with high degree of customization, can enhance the creation of complex devices. Here, we develop a novel approach for creating single-crystal devices that is applied to the fabrication of superconducting devices based on topological insulator Bi2Se3 in a geometry characteristic of a superconducting quantum interference device. Characterization of these devices reveals that superconductivity is induced in our crystal and the supercurrent is modulated by applying an external magnetic field. These results open the way to tailoring the response of hybrid devices that combine superconductors and topological insulators by focused ion beam techniques., Authors acknowledge grants PID2020-112914RB-I00, PID2023-1464510B-I00 and CEX2023-001286-S funded by MCIN/AEI/10.13039/501100011033, CSIC, through Research Platform PTI-001 and also Gobierno de Aragón through the doctoral fellowship (R. G. A.) and the grant number E13_23R, with European Social Funds (Construyendo Europa desde Aragón). The following networking projects are acknowledged: Spanish Nanolito (RED2022-1634096-T) and COST-FIT4NANO (action CA19140). Authors acknowledge the Laboratory for Advanced Microscopies (LMA) and the Institute of Nanoscience and Materials of Aragón (INMA) from CSIC-Universidad de Zaragoza for offering access to their instruments and expertise. Technical support by the LMA technicians at Universidad de Zaragoza is acknowledged, particularly thank to L. Casado for her assistance with the nanomanipulation procedures. Authors acknowledge also the Physical Measurements Service from Servicio General de Apoyo a la Investigación (SAI) - University of Zaragoza. The work at the University of Warwick was supported by EPSRC, UK through Grant EP/T005963/1., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of thermal processing on the structural and magnetic properties of epitaxial Co2FeGe films

  • Vovk, Andrii
  • Popadiuk, Dariia
  • Postolnyi, Bogdan
  • Bunyaev, Sergey A.
  • Štrichovanec, Pavel
  • Pardo, José A.
  • Algarabel, Pedro A.
  • Salyuk, Olga
  • Korenivski, Vladislav
  • Kakazei, Gleb N.
  • Golub, Vladimir O.
  • Araujo, João Pedro
The data presented in this study are available upon request from the corresponding author., The structure and magnetic properties of epitaxial Heusler alloy films (Co2FeGe) deposited on MgO (100) substrates were investigated. Films of 60 nm thickness were prepared by magnetron co-sputtering at different substrate temperatures (TS), and those deposited at room temperature were later annealed at various temperatures (Ta). X-ray diffraction confirmed (001) [110] Co2FeGe || (001) [100] MgO epitaxial growth. A slight tetragonal distortion of the film cubic structure was found in all samples due to the tensile stress induced by the mismatch of the lattice parameters between Co2FeGe and the substrate. Improved quality of epitaxy and the formation of an atomically ordered L21 structure were observed for films processed at elevated temperatures. The values of magnetization increased with increasing TS and Ta. Ferromagnetic resonance (FMR) studies revealed 45° in-plane rotation of the easy anisotropy axis direction depending on the degree of the tetragonal distortion. The film annealed at Ta = 573 K possesses the minimal FMR linewidth and magnetic damping, while both these parameters increase for another TS and Ta. Overall, this study underscores the crucial role of thermal treatment in optimizing the magnetic properties of Co2FeGe films for potential spintronic and magnonic applications., The Portuguese team acknowledges the support of the FCT—Portuguese Foundation for Science and Technology under the projects LA/P/0095/2020 (LaPMET), UIDB/04968/2020, UIDP/04968/2020, 2022.03564.PTDC (DrivenPhonon4Me), and SFRH/BPD/84948/2012 (A.V.). This work was partially supported by the Spanish Ministerio de Ciencia e Innovación through project PID2020-112914RB-I00, as well as by the regional Gobierno de Aragón through project E28 23R including FEDER funding. The work of D.P. was supported by the Norwegian Financial Mechanism 2014–2021 through project UMO-2020/37/K/ST3/02450. D.P. and V.K. gratefully acknowledge financial support from the Swedish Research Council (VR grant 2018-03526). V.O.G. and O.S. are grateful for the support from the Science and Technology Center in Ukraine, grant #9918., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Epitaxy-driven ferroelectric/non-ferroelectric polymorph selection in an all-fluorite system

  • Barriuso, Eduardo
  • Jiménez, Ricardo
  • Langenberg, Eric
  • Koutsogiannis, Panagiotis
  • Larrea, Ángel
  • Varela, Manuel
  • Magén, César
  • Algarabel, Pedro A.
  • Algueró, Miguel
  • Pardo, José A.
Films of ferroelectric hafnia have hitherto been deposited on electrodes with a non-fluorite crystal structure. As a result, they are polycrystalline, contain fractions of non-ferroelectric polymorphs or have poor crystal quality. Here, a strategy that circumvents all these limitations is shown. Seven nanometers-thick epitaxial Hf0.5Zr0.5O2 (HZO) films are deposited directly on yttria-stabilized zirconia (YSZ) single-crystals. The fluorite structure of the whole system enables coherent epitaxy, while the substrate orientation induces polymorph-selective growth, being the HZO films orthorhombic on YSZ(111) and monoclinic on YSZ(001). Besides, the YSZ substrate can play the role of a buried floating electrode under the appropriate measuring conditions (temperature and frequency) thanks to its thermally-activated oxygen conductivity. Indeed, out-of-plane ferroelectric switching is confirmed in the orthorhombic HZO samples at 185 °C and 0.01 Hz frequency. This original approach avoids the need to deposit conducting bottom layers, allowing high-quality orthorhombic hafnia to be obtained directly on the substrate and its ferroelectric nature to be studied. Moreover, it constitutes a case of ion-driven ferroelectric switching, and thus gives support to the recently proposed relationship between ionic conductivity, and ferroelectricity in fluorite systems., The authors acknowledge financial support by Spanish Agencia Estatal de Investigación through the following grants funded by MCIN/AEI/10.13039/501100011033: PID2019-107338RB-C64, PID2020-112914RB-I00, and PID2021-128281NA-I00. M.A. and R.J. also recognize funding through project TED2021-130871B-C21 / AEI/10.13039/501100011033/ Unión Europea Next Generation EU/PRTR. The authors acknowledge Javier Blasco from INMA-CSIC (Zaragoza, Spain) for the synthesis of the PLD target. Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas (LMA)” at the University of Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of the La2NiO4+δ oxygen content on the synaptic properties of the TiN/La2NiO4+δ/Pt memristive devices

  • Koroleva, Aleksandra
  • Khuu, Thoai-Khanh
  • Magén, César
  • Roussel, Hervé
  • Jiménez, Carmen
  • Ternon, Céline
  • Vatajelu, Elena-Ioana
  • Burriel, Mónica
The rapid development of brain-inspired computing requires new artificial components and architectures for its hardware implementation. In this regard, memristive devices emerged as potential candidates for artificial synapses because of their ability to emulate the plasticity of the biological synapses. In this work, the synaptic behavior of the TiN/La2NiO4+δ/Pt memristive devices based on thermally annealed La2NiO4+δ films is thoroughly investigated. Using electron energy loss spectroscopy (EELS), it is shown that post-deposition annealing using inert (Ar) or oxidizing (O2) atmospheres affects the interstitial oxygen content (δ) in the La2NiO4+δ films. Electrical characterization shows that both devices exhibit long-term potentiation/depression (LTP/LTD) and spike-timing-dependent plasticity (STDP). At the same time, the Ar annealed TiN/La2NiO4+δ/Pt device demonstrates filamentary-like behavior, fast switching, and low energy consumption. On the other hand, the O2 annealed TiN/La2NiO4+δ/Pt devices are forming-free, exhibiting interfacial-like resistive switching with slower kinetics. Finally, the simulation tools show that spiking neural network (SNN) architectures with weight updates based on the experimental data achieve high inference accuracy in the digit recognition task, which proves the potential of TiN/La2NiO4+δ/Pt devices for artificial synapse applications., This project has received financial support from the CNRS through the MITI interdisciplinary programs (“Synconnect” 80|PRIME project) and was partially supported by ANR France within the EMINENT Project ANR-19-CE24-0001 and by the LabEx Minos ANR-10-LABX-55-01 (for T.-K.K.). This work has been partially supported by MIAI@Grenoble Alpes, (ANR-19-P3IA-0003) and from the grants PID2020-112914RB-I00 funded by MCIN/AEI/10.13039/501100011033, and E13_23R funded by the Aragon regional government. This research has benefited from characterization equipment of the Grenoble INP–CMTC platform supported by the Centre of Excellence of Multifunctional Architectured Materials “CEMAM” n°ANR-10-LABX-44-01 funded by the “Investments for the Future” Program. Part of this work, carried out on the Platform for Nanocharacterization (PFNC), was supported by the “Recherches Technologiques de Base” program of the French National Research Agency (ANR). In addition, this work has been performed with the help of the “Plateforme Technologique Amont (PTA)” in Grenoble, with the financial support of the “Nanosciences aux limites de la Nanoélectronique” Foundation and CNRS Renatech network. The authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node «Laboratorio de Microscopias Avanzadas (LMA)» at «Universidad de Zaragoza»., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polymer assisted deposition of YIG thin films with thickness control for spintronics applications

  • Corcuera, Rubén
  • Jiménez-Cavero, Pilar
  • Pérez del Real, Rafael
  • Rivadulla, Francisco
  • Ramos, Rafael
  • Morales-Aragonés, José Ignacio
  • Sangiao, Soraya
  • Magén, César
  • Morellón, Luis
  • Lucas, Irene
The use of magnetic garnets in new technologies such as spintronic devices requires fine-structured thin films. Classical fabrication techniques for these materials, typically physical vapor deposition methods, lead to excellent magnetic behavior. However, availability and scalability for potential applications are well restricted. In this study, we propose an innovative approach to fabricating Yttrium Iron Garnet thin films with precise thickness control achieved through iterative layer deposition via a chemical synthesis route. Remarkably, the iterative deposition process results in films exhibiting exceptional crystallinity. Magnetic characterization provides saturation magnetization and coercivity values on par with those reported in literature, summed to narrow ferromagnetic resonance lines. Therefore, in this work we demonstrate the viability of polymer assisted deposition as a promising alternative thinking about scalability to conventional deposition techniques for this material. Notably, our findings reveal energy conversion efficiencies comparable to those achieved with materials synthesized via physical vapor deposition methods., The authors acknowledge the support from the Spanish Ministry of Science MCIN/AEI/10.13039/501100011033 through Project Nos. PID2020 - 112914RB - 100, PID2022 - 138883NB - 100, and TED2021 - 130930B - 100. The authors acknowledge the Laboratory for Advanced Microscopies (LMA) at the Institute of Nanoscience and Materials of Aragón (INMA)-University of Zaragoza for offering access to their instruments and expertise. R.R. acknowledges support from Grant No. RYC 2019 - 026915 - I funded by the MCIN/AEI/10.13039/5 01100011033 and by the ESF investing in your future, the Xunta de Galicia (ED431F 2022/04, ED431B 2021/013, Centro de investigación do Sistema universitario de Galicia accreditation 2023–2027, ED431G 2023/03) and the European Union (European Regional Development Fund - ERDF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3D ice lithography and post-processing using gold organometallic precursor

  • Chang, Bingdong
  • Anand, Gwendoline A.E.
  • Le, Hoa Thanh
  • Liu, Xiyuan
  • Hansen, Thomas W.
  • Teresa, José María de
  • Han, Anpan
3D ice lithography (3DIL) is an emerging method for fabricating polymeric 3D objects with submicrometer patterns. However, there are no studies on 3DIL using metal-containing precursors. In addition, unlike numerous post-processing studies of two-photon polymerization (2PP) and focused electron beam-induced deposition (FEBID), there are no 3DIL post-processing investigations. Here, we present a 3DIL process using an organometallic precursor (gold dimethyl acetylacetonate, Au(acac)Me2), and its first post-processing study. We investigated 3D processing parameters and post-processing using Ar-, air annealing, and O2 plasma. X-ray photoelectron spectroscopy (XPS), atomic force microscopy, energy-dispersive X-ray spectroscopy, and transmission electron microscopy were used for materials analysis. Our results show (i) 3DIL processed materials exhibit thermoset properties, as they decompose rather than melt at elevated temperatures; (ii) free metal atoms diffuse and form clusters, here, gold nanoparticles with a diameter of around 10 nm were formed; (iii) oxygen treatments remove carbon-based ligands while leaving noble metals behind. Also, Ar annealing leads to less material loss than air annealing, while O2 plasma generates oxidized Au states and efficiently removes carbon ligands. Ar annealing at 600 °C reduces the carbon XPS signals significantly and increases the gold XPS signal by ten times, giving a good purification effect but with a high material removal of around 95 %. We printed large Au metalorganic 3D structures (>1000 times larger volume than FEBID), which suggests 3DIL bridges the gap between the capabilities of 2PP and FEBID. The unique capabilities of organometallic compounds to detect environmental changes can position 3DIL for sensing applications, and 3DIL is a safe and non-toxic technique to manufacture nanoparticle-containing 3D structures, which may have applications in many fields such as nanophotonics, drug delivery, and catalysis., Lundbeck Foundation grant R305–2018–2779 (AH) -Lundbeck Foundation grant R402–2022–1530 (BC) - Novo Nordisk Foundation grant NNF0064289 (AH) - Marie and B. Richters Foundation (AH) - MCIN/AEI/10.13039/ 501100011033 grant PID2020–112914RB-I00 (JMDT) - Gobierno de Aragón grant E13_23R (JMDT)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Position-sensitive domain-by-domain switchable ferroelectric memristor

  • Risch, Felix
  • Koutsogiannis, Panagiotis
  • Tikhonov, Yuri
  • Razumnaya, Anna G.
  • Magén, César
  • Pardo, José A.
  • Lukyanchuk, Igor
  • Stolichnov, Igor
Domain-wall electronics based on the tunable transport in reconfigurable ferroic domain interfaces offer a promising platform for in-memory computing approaches and reprogrammable neuromorphic circuits. While conductive domain walls have been discovered in many materials, progress in the field is hindered by high-voltage operations, stability of the resistive states and limited control over the domain wall dynamics. Here, we show nonvolatile memristive functionalities based on precisely controllable conductive domain walls in tetragonal Pb(Zr,Ti)O3 thin films within a two-terminal parallel-plate capacitor geometry. Individual submicron domains can be manipulated selectively by position-sensitive low-voltage operations to address distinct resistive states with nanoampere-range conduction readout. Quantitative phase-field simulations reveal a complex pattern of interpenetrating a- and c-domain associated with the formation of 2D conducting layers at the intertwined regions and the emergence of 3D percolation channels of extraordinary high conductivity. Subnanometer resolution polarization mapping experimentally proves the existence of such extensive segments of charged tail-to-tail domain walls with unconventional structure at the ferroelastic-ferroelectric domain boundaries., This project has received funding from the EU Horizon 2020 program under the MSCA-ITN action MANIC, grant agreement No 861153 and MSCA-RISE action MELON, grant agreement No 872631. The authors gratefully acknowledge Dr. B. Fraygola for PLD deposition and Dr. S. Kamaei for helpful discussions. The authors acknowledge research Projects No. PID2020-112914RB-I00, PID2023-147211OB-C22 788, and the Severo Ochoa program CEX2023-001286-S funded by Grant No. MCIN/AEI/10.13039/501100011033. This work was also funded from Regional Gobierno de Aragon through Project Nos. E13_23R and E28_23R, including FEDER funding. A.R. acknowledges the Slovenian Research Agency support (P1-0125). This work was granted access to HPC resources of ”Plateforme MatriCS” within University of Picardie Jules Verne. ”Plateforme MatriCS” is cofinanced by the European Union with the European Regional Development Fund (FEDER) and the Hauts-De-France Regional Council among others., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hierarchical domain structures in buckled ferroelectric free sheets

  • Pesquera, David
  • Cordero-Edwards, Kumara
  • Checa, Martí
  • Ivanov, Ilia
  • Casals, Blai
  • Rosado, Marcos
  • Caicedo, José Manuel
  • Casado-Zueras, Laura
  • Pablo-Navarro, Javier
  • Magén, César
  • Santiso, José
  • Domingo, Neus
  • Catalán, Gustau
  • Sandiumenge, Felip
Flat elastic sheets tend to display wrinkles and folds. From pieces of clothing down to two-dimensional crystals, these corrugations appear in response to strain generated by sheet compression or stretching, thermal or mechanical mismatch with other elastic layers, or surface tension. Extensively studied in metals, polymers and, — more recently — in van der Waals exfoliated layers, with the advent of thin single crystal freestanding films of complex oxides, researchers are now paying attention to novel microstructural effects induced by bending ferroelectric-ferroelastics, where polarization is strongly coupled to lattice deformation. Here we show that wrinkle undulations in BaTiO<inf>3</inf> sheets bonded to a viscoelastic substrate transform into a buckle delamination geometry when transferred onto a rigid substrate. Using spatially resolved techniques at different scales (Raman, scanning probe and electron microscopy), we show how these delaminations in the free BaTiO<inf>3</inf> sheets display a self-organization of ferroelastic domains along the buckle profile that strongly differs from the more studied sinusoidal wrinkle geometry. Moreover, we disclose the hierarchical distribution of a secondary set of domains induced by the misalignment of these folding structures from the preferred in-plane crystallographic orientations. Our results disclose the relevance of the morphology and orientation of buckling instabilities in ferroelectric free sheets, for the stabilization of different domain structures, pointing to new routes for domain engineering of ferroelectrics in flexible oxide sheets., D.P. acknowledges funding from ‘la Caixa’ Foundation fellowship (ID 100010434). The authors acknowledge the Spanish Ministry of Industry, Economy and Competitiveness (MINECO) through Grants no PID2019–108573GB-C21, PID2022–140589NB-I00, PID2020–112914RB-I00 and PID2023–147211OB-C22 funded by Grant No MCIN/AEI/10.13039/501100011033. The Micro Raman imaging research was conducted as part of a user project at the Center for Nanophase Materials Sciences (CNMS), which is a US Department of Energy, Office of Science User Facility at Oak Ridge National Laboratory. Authors acknowledge the use of instrumentation financed through Grant IU16–014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, and Generalitat de Catalunya. The ICN2 is funded by the CERCA programme/Generalitat de Catalunya and by the Severo Ochoa Centres of Excellence Programme, funded by the Spanish Research Agency (AEI, CEX2021–001214-S). The ICMAB is funded the Severo Ochoa Centres of Excellence Programme, funded by the Spanish Research Agency (AEI, CEX2023–001263-S). The INMA is funded by the Severo Ochoa Centres of Excellence Programme (AEI, CEX2023–001286-S). The authors acknowledge the European’s Union Horizon 2020 research and innovation programme under Grant No 823713-ESTEEM3. This work was also funded from Regional Gobierno de Aragon through Project Nos. E13_23R, including FEDER funding. The authors also acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node «Laboratorio de Microscopias Avanzadas (LMA)» at «Universidad de Zaragoza». The authors are grateful to Dr. Kapil Gupta for assistance with the Spectra electron microscope at the Joint Electron Microscopy Centre at ALBA synchrotron (JEMCA)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021–001214-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2023–001263-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2023–001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Method for extraction of microcrystals based on focused electron/ion beam processing and their magnetotransport characterization

  • Sáenz- Hernández, Amaia
  • Sangiao, Soraya
  • Balakrishnan, Geetha
  • Teresa, José María de
We propose a new in situ microfabrication method using focused electron/ion beam processing to study the influence of crystal orientation on magnetotransport properties. Previous studies obtained microcrystals extracted from bulk single crystals with the out-of-plane crystallographic axis−→c perpendicular to the applied magnetic field −→B and parallel to the current flow. The new method orients −→c parallel to −→B and perpendicular to the current. Magnetotransport measurements at 2 K on Bi2Se3 samples fabricated using both methods reveal differences in zero-field resistivity and charge carrier mobility, demonstrating the impact of the crystal orientation in which the microcrystal is extracted on the electrical transport properties., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., The authors acknowledge grant PID2020-112914RB-I00 and PID2023-146451OB-I00, funded by MCIN/AEI/https://doi.org/10.13039/501100011033, and CSIC through Research Platform PTI-001. The doctoral fellowship (A. S. H.), PRE2022-103314, associated with project CEX2021-001144-S-20–9, also from CSIC, is also acknowledged. The work at the University of Warwick was supported by EPSRC, UK, through grant EP/T005963/1., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001144-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evolution at the nanoscale of magnetic clustering of the Griffiths-like phase in Tb4.925La0.075Si2Ge2

  • Marcano, Noelia
  • Jefremovas, Elizabeth M.
  • Titov, Ivan S.
  • Michels, Andreas
  • Steinke, Nina Juliane
  • Belo, João Horta
  • Araujo, João Pedro
  • Algarabel, Pedro A.
  • Fernández Barquín, L.
Griffiths-like phases (GP) are connected to disordered magnetic nanostructures. Here, we focus on the Giant Magnetocaloric compound Tb5−𝑥La𝑥Si2Ge2 with x = 0.075 where a re-entrant cluster-glass state (CGS) emerges at a characteristic freezing temperature T𝐹 ∼ 140 K within the GP (110–180 K), i.e. above the Curie temperature (T𝐶). This unconventional magnetic state has been studied via temperature-dependent DC magnetization (5–300 K), time-dependent macroscopic AC susceptibility (80–200 K), including ageing and memory experiments, and magnetic small-angle neutron scattering (SANS), above T𝐶(110–250 K). This approach allows to reveal the microscopic structure of the GP at the nanoscale in this system. AC susceptibility and DC magnetization confirm the presence of interacting short-range (< 2 nm) ferromagnetic (FM) clusters in the GP. The Langevin-like field dependence of the isothermal magnetization provides a quantitative assessment of the temperature dependence of the cluster size. Memory effects and ageing phenomena within GP are indicative of magnetically-frustrated states. Our results reveal that the dynamics is affected by the progressive coupling among CGS and GP towards the FM state. SANS correlation lengths between 1-5 nm above T𝐹 are determined from the calculated magnetic correlation function C(r), which is computed from the magnetic SANS intensity. A phenomenological model based on the formation of FM clusters with intercluster (FM) interactions within a PM matrix is proposed to explain the unusual re-entrant glassy behaviour in the PM state. These findings serve as another experimental reference for the global understanding of disordered magnetic compounds., This research was funded by Spanish MCIN/AEI/10.13039/501100011033 (grant number PID2020-112914RB-100 and PID2023-146448OB-C22) and the Aragón Regional government (grant number E28-20R). This project has received funding from the European Union’s Horizon Europe research and innovation program through the European Innovation Council under the grant agreement No 101161135 - MAGCCINE. JH Belo acknowledges PTDC/EMETED/3099/2020, UIDP/04968/2020 Programático, NECL-NORTE 010145-FEDER022096, UIDB/04968/2020, CERN/FISTEC/0003/2019 and FCT for his contract DL57/2016 reference SFRH-BPD8730/2012. EMJ thanks Postdoc grant (von Humboldt)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strain relief and domain architecture in epitaxial NiO films on La2/3Sr1/3MnO3/SrTiO3 for spin-transport engineering

  • Chen, Shoulong
  • Frontera, Carlos
  • Toda-Casaban, Meritxell
  • Pomar, Alberto
  • Balcells, Lluis
  • Konstantinovic, Zorica
  • Magén, César
  • Martínez Perea, Benjamín
  • Mestres, Narcís
The data that support the findings of this study are available from the corresponding author upon reasonable request., This study reports on the epitaxial growth and structural characterization of ultrathin NiO-films deposited by magnetron sputtering on La2/3Sr1/3MnO3 (LSMO) films grown on SrTiO3 (STO) substrates with (001)- and (111)-orientations. X-ray diffraction and atomic-force microscopy show that all NiO layers are single-phase, face-centered pseudo-cubic, atomically smooth, root-main-square (RMS) surface roughness <0.15 nm, and form abrupt interfaces with LSMO. High-resolution reciprocal-space maps reveal that the films are largely relaxed, but exhibit a slight compressive distortion, yielding unit-cell volumes larger than bulk NiO. Despite a nominal ≈7% lattice mismatch, aberration-corrected scanning transmission electron microscopy uncovers an array of misfit dislocations at the NiO/LSMO interface that help to accommodate strain allowing epitaxial growth of NiO layers. On (001)-oriented samples, the four antiferromagnetic T-domains are oblique to the sample plane, while on the (111) case, one lies in-plane. This in-plane domain shows greater spacing between ferromagnetic (111) planes due to unit cell distortion. This structural domain splitting can influence magnetic order and spin transmission efficiency, highlighting crystallographic orientation as a key factor in designing high-performance spintronic devices., This work has received funding from the State Investigation Agency, through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023–001263-S and CEX2023-001286-S) and “OXISOT” (PID2021-128410OB-I00), “AMONANO” (PID2020-112914RB-I00), and HTSUPERFUN (PID2021-124680OB-I00) funded by MCIN/AEI/ 10.13039/ 501100011033, from the Gobierno de Aragon project E13_23R, including FEDER funding, and by “ERDF A way of making Europe,” by the “European Union.” Shoulong Chen acknowledges financial support from the China Scholarship Council (CSC). M. Toda-Casaban acknowledges financial support from the “Spanish Ministry of Science, Innovation and Universities” through a FPU scholarship. The authors thank BESSY-II Synchrotron for providing beamtime (exp. num. 242-12902-ST) and Dr. Daniel Többens for his kind assistance during data collection at the KMC-II beamline. The authors acknowledge the contribution from ICMAB-CSIC's Scientific & Technological Services, specially X-Ray Diffraction (Mr. J. Esquius, Ms. A. Crespi, and Mr. X. Campos). This work has been performed in the framework of the Ph.D. program in Materials Science of the Universitat Autònoma de Barcelona (UAB), through the CSC/UAB Joint Scholarship program., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001263-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Yttrium: A highly efficient dopant for ferroelectric HfO2

  • Ghiasabadi Farahani, Mehrdad
  • Magén, César
  • Quintana, Alberto
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
The ferroelectric phase of HfO2 is metastable, and its stabilization in thin films strongly depends on both doping and microstructure. Optimally doped films exhibit high ferroelectric polarization; however, it typically decreases rapidly with increasing film thickness. In contrast to these usual results, a few exceptions report ferroelectricity in thick films with specific dopants, such as Y or La, crystallized under conditions that favor granular microstructure. Disentangling the roles of microstructure and doping on the thickness-dependent stability of ferroelectricity remains essential, and identifying highly effective dopant atoms is of high relevance. In this work, Y-doped epitaxial films of various thicknesses up to about 100 nm are prepared to determine phase evolution and ferroelectric polarization. Films deposited on SrTiO3(001) and SrTiO3(110) substrates exhibit robust ferroelectric response across the entire thickness range, in contrast to equivalent La-doped films. Coexistence of monoclinic (paraelectric) and orthorhombic (ferroelectric) phases is observed, with columnar grains revealed by scanning transmission electron microscopy, demonstrating that the microstructure of epitaxial HfO2 films can be preserved beyond 10 nm. The observed columnar grain structure indicates that the robustness of ferroelectricity in Y-doped films results from the high effectiveness of Y, supporting its use in devices requiring thick ferroelectric layers., Financial support from the Spanish Ministry of Science, Innovation and Universities (MCIN/AEI/10.13039/501100011033), through the Severo Ochoa program (CEX2023-001263-S and CEX2023-001286-S), PDC2023-145874-I00, PID2023-147211OB-C21, PID2023-147211OB-C22, TED2021-130453B-C21, PID2020-112548RB-I00, PID2020-112914RB-I00, and PID2019-107727RB-I00 projects, from Gobierno de Aragon project E13_23R, including FEDER funding, and from Generalitat de Catalunya (2021 SGR 00804) is acknowledged. M.G.F. is financially supported by Spanish Ministry of Science and Innovation with FPI2021 PRE2021-098067 fellowship funded by Fondo Social Europeo., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001263-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cryogenic focused ion beam milling to investigate the anisotropic magnetotransport properties of bismuth microcrystals

  • Sáenz- Hernández, Amaia
  • Sangiao, Soraya
  • Felser, Claudia
  • Shekhar, Chandra
  • Pardo, José A.
  • Ibarra, Alfonso
  • Teresa, José María de
Early View, The data that support the findings of this study are available from the corresponding author upon reasonable request., Bulk single crystals exhibit the intrinsic properties of a given compound, but studying their anisotropic magnetotransport properties is challenging. Focused Ion Beam (FIB) milling at room temperature has been previously used to guide the electrical current path along a defined crystal direction or to extract microcrystals where the electrical current flows along a known direction. However, some materials, such as bismuth, melt under FIB irradiation. Bismuth, known for its unique properties, including very large magnetoresistance and a highly anisotropic Fermi surface, reacts to room-temperature Ga+ FIB irradiation, forming droplets on its surface. Therefore, a novel microfabrication approach based on cryogenic FIB milling is developed here. By using a Peltier stage or an integrated cryogenic module, surface melting is mitigated below −30 °C. Microscale slabs are extracted, either parallel or perpendicular to the single crystal surface, then shaped and electrically contacted in a chip for magnetotransport characterization. The large magnetoresistance observed along with Shubnikov–de Haas oscillations with single periodicity when current is applied perpendicular to the c axis, highlights the success of the approach. These results enable FIB microfabrication of single crystals that are sensitive to FIB irradiation and investigation of the anisotropic magnetotransport properties in microcrystals., The authors would also like to thank the Laboratory for Advanced Microscopies (LMA) and the Institute of Nanoscience and Materials of Aragón (INMA), from CSIC–Universidad de Zaragoza, for providing access to their instruments and expertise. Additionally, the authors are grateful to the ELECMI network for granting free access through a competitive call to the Helios 650 system through project ELC529-2025. Technical support from the LMA technicians at Universidad de Zaragoza is acknowledged, with special thanks to L. Casado for her assistance with the nanofabrication procedures involving the Dual Beam system. Additionally, the Physical Measurements Service from Servicio General de Apoyo a la Investigación (SAI) at the University of Zaragoza is also acknowledged. Lastly the authors would like to acknowledge the following founding sources: grant PID2020-112914RB-I00 and PID2023-146451OB-I00, funded by MCIN/AEI/10.13039/501100011033 and CSIC through Research Platform PTI-001; the doctoral fellowship for A.S.H. PRE2022-103314, associated with the CSIC project CEX2021-001144-S-20-9, funded by MCIN/AEI/10.13039/501100011033; grant E13_23R, funded by Gobierno de Aragón; and grant CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001144-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Crystallographic engineering of spin transport in antiferromagnetic NiO thin films

  • Chen, Shoulong
  • Pomar, Alberto
  • Balcells, Lluis
  • Konstantinovic, Zorica
  • Bozzo, Bernat
  • Frontera, Carlos
  • Magén, César
  • Mestres, Narcís
  • Martínez Perea, Benjamín
In this work, we investigate how the crystallographic growth direction influences spin current transmission in antiferromagnetic (AF) NiO thin films. By manipulating epitaxial growth, we explored the spin transport characteristics in La2/3Sr1/3MnO3/NiO/Pt heterostructures grown on top of (001)- and (111)-oriented SrTiO3 substrates, varying the NiO barrier thickness (tNiO). Spin currents were generated via spin pumping (SP), and detection was done by the inverse spin Hall effect (ISHE). X-ray diffraction and high-resolution electron microscopy techniques confirmed high-quality epitaxial films with nearly atomically sharp interfaces and similar dislocation distributions, irrespective of the growth direction. Nevertheless, epitaxially engineered (111) heterostructures exhibited superior spin transport properties, including lower magnetic damping (α), longer spin diffusion lengths (λSd), and higher spin mixing conductance (g↑↓). The temperature dependence of the ISHE voltage signal (VISHE) also showed orientation-dependent behavior: while (001)-oriented samples followed a monotonic trend, (111)-oriented samples displayed a peak that shifted to higher temperatures with increasing tNiO, associated with the emergence of AF ordering. Moreover, (111)-oriented samples demonstrated notable spin current amplification at room temperature, peaking at tNiO ≈ 1 nm before decaying quasi-exponentially, indicative of spin diffusion-mediated conduction. Although the spin diffusion length in (111)-oriented samples was roughly double that of their (001)-oriented counterparts, it was still too short to be explained by angular momentum transport by mobile antiferromagnons through NiO. Instead, these findings point to a mechanism involving magnetic correlations and short-range thermal magnons. The superior spin transport properties and the enhanced spin conduction in (111)-oriented samples are primarily attributed to a synergistic combination of interfacial and dynamic effects, a more favorable Néel vector alignment and distinct interface symmetry, which can enhance spin-Hall effects or enable different spin textures. Overall, this study underscores the pivotal role of the Néel vector and crystallographic orientation in AF spin transport, providing valuable insights for the design and optimization of spintronic devices., This work has received funding from the State Investigation Agency, through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023–001263-S) and “OXISOT” (PID2021-128410OB-I00) and “AMONANO” (PID2020-112914RB-I00) and HTSUPERFUN (PID2021-124680OB-I00) funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, by the “European Union”. Shoulong Chen acknowledges financial support from the China Scholarship Council (CSC). We acknowledge the contribution from ICMAB-CSIC’s Scientific & Technological Services: X-ray Diffraction (Mr. J. Esquius, Ms. A. Crespi and Mr. X. Campos). This work has been performed in the framework of the Ph.D. program in Materials Science of the Universitat Autònoma de Barcelona (UAB), through the CSC/UAB Joint Scholarship program., CEX2023-001263-S, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Infrared phonons in monoclinic Hf0.5Zr0.5O2 thin films

  • Železný, Vladimir
  • Prado, Esther de
  • Barriuso, Eduardo
  • Algarabel, Pedro A.
  • Pardo, José A.
  • Kamba, Stanislav
Infrared (IR) reflectance spectra of monoclinic Hf0:5Zr0:5O2 (HZO) films with thickness in the range of 10–90 nm deposited on different cuts of Al2O3 and yttria-stabilized zirconia (YSZ) substrates were measured in the frequency region 30–4000 cm1. Several phonons belonging to HZO were observed even for the 10nm films. X-ray diffraction measurements were used to determine the crystal structure of the films and their orientation with respect to the substrates. The phonon spectra of HZO films grown on the anisotropic (1102) R-cut Al2O3 substrates exhibit strong anisotropy. Comparing them with the spectra of the films on isotropic YSZ substrates, it allows us to assign the symmetry and polarization of the phonons in HZO films. Fitting the IR spectra by the classical Lorentz model, we obtain the phonon parameters, their response functions, and their contribution to static permittivity. We also measured the IR reflectance of HfO2, ZrO2 and HZOceramics and compared their phonon parameters with those of the corresponding thin films., This work has been supported by the Czech Science Foundation (Project No. 24-10791S) and by project TERAFIT-CZ.02.01.01/00/22_008/0004594 co-financed by the European Union and the Czech Ministry of Education, Youth and Sports. We also acknowledge financial support from Spanish Agencia Estatal de Investigación through projects PID2020-112914RB-I00 and PID2023-147211OB-C22 funded by MCIN/AEI/10.13039/501100011033 and from Gobierno de Aragón (Research Group E28_23R). E.B. acknowledges the support through the PRE2018-083233 predoctoral training grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interface engineering using multiple La-Doped HfO2 epitaxial subnanolayers to improve the ferroelectric properties of Hf0.5Zr0.5O2 films

  • Ghiasabadi Farahani, Mehrdad
  • Song, Tingfeng
  • Magén, César
  • Zou, Jingye
  • Sánchez Barrera, Florencio
  • Fina, Ignasi
The fabrication of ferroelectric multilayer systems based on hafnia represents a promising approach for achieving high-performance ferroelectric devices. Electrical cycling instability is, in this regard, a key barrier to commercialization. Here, we report on the incorporation of La:HfO2 subnanolayers into an epitaxial Hf0.5Zr0.5O2 film, forming multilayer heterostructures. Ferroelectric properties of multilayers are compared with single-layer structures. We observe that wake-up and fatigue are not present up to 105 cycles in the multilayers. The improved stability is enabled by the ≈25% reduction of coercive field together with the lower leakage resulting from the columnar microstructure throughout the entire thickness without phase discontinuity at interfaces and negligible presence of structural defects. This improvement on endurance response is obtained while the polarization is maintained in comparison with single Hf0.5Zr0.5O2 films; there is negligible loss of the polarization throught time and there is a fast response time lower than 100 ns, limited by the measurement circuit. In addition, dielectric permittivity and large resistive switching up to 108%, not related to the ferroelectric response, are also observed. These findings underscore multilayer architecture as an interesting approach to improve properties while also showing that careful selection of interlayer composition is critical to improve device performance., Financial support from the Spanish Ministry of Science, Innovation and Universities (MCIN/AEI/10.13039/501100011033), through the Severo Ochoa MATRANS42 (CEX2023-001263-S) and CEX2023-001286-S, PDC2023-145874-I00, PID2023-147211OB-C21, PID2023-147211OB-C22, TED2021-130453B-C21, PID2020-112548RB-I00, PID2020-112914RB-I00, and PID2019-107727RB-I00 projects and from Generalitat de Catalunya (2021 SGR 00804), and from Gobierno de Aragon Project E13_23R, including FEDER funding, is acknowledged. We also acknowledge project TED2021-130453B-C21, funded by MCIN/AEI/10.13039/501100011033. T.S. is financially supported by China Scholarship Council (CSC) with No. 201807000104. M.G.F. is financially supported by Spanish Ministry of Science and Innovation with FPI2021 PRE2021-098067 fellowship funded by Fondo Social Europeo. The authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node Laboratorio de Microscopias Avanzadas (LMA) at Universidad de Zaragoza. We acknowledge the assistance of the ICMAB-CSIC Scientific & Technical Services: Thin Films Laboratory (Raul Solanas and Victor Pardo) and X-ray Diffraction Laboratory (Anna Crespi, Joan Esquius, and Francisco Javier Campos)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001263-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electronically Driven Magnetoelectric Coupling in Co/La:Hf0.5Zr0.5O2 Heterostructures for Energy-Efficient Neuromorphic Computing

  • Quintana, Alberto
  • Magén, César
  • Ghiasabadi Farahani, Mehrdad
  • Dong, Wenjing
  • Zou, Jingye
  • Dix, Nico
  • Ma, Zheng
  • Menéndez, Enric
  • Foerster, Michael
  • Niño, Miguel Ángel
  • Cazorla, Claudio
  • Sort, Jordi
  • Sánchez Barrera, Florencio
  • Fina, Ignasi
Magnetoelectric materials enable low-power memory devices by leveraging the electric control of magnetization. The discovery of ferroelectricity in doped hafnia has unlocked further opportunities since the distinct ferroelectric switching mechanism in this material can enable robust and multilevel modulation of magnetization by electric field, if combined with appropriate magnetic materials. Here, we demonstrate a 5% electric field-induced modulation of the saturation magnetization in a cobalt layer, driven by ferroelectric switching of an adjacent epitaxial La(1%):Hf0.5Zr0.5O2 film. Dichroic imaging with synchrotron radiation confirms that ferroelectric switching induces a magnetic change. We show that the response time is faster than 500 ns (limited by the setup time resolution threshold) and that energy consumption is 6 nJ. This low energy consumption is mainly enabled by the absence of relevant leakage current contribution (10 nA/cm2 at 500 mV). The found response time and energy-efficient behavior point to the presence of an electronically driven modulation of magnetism (i.e., conventional magnetoelectric effects), which is confirmed by theoretical calculations and compositional analysis. Additionally, a multilevel magnetoelectric response is observed, enabling neuromorphic-like behavior. The demonstration of magnetoelectric coupling in a system based on CMOS-compatible materials offers a viable route toward the development of low-power beyond von-Neumann technologies., Financial support from the Spanish Ministry of Science, Innovation and Universities (MCIN/AEI/10.13039/501100011033), through the Severo Ochoa MATRANS42 (CEX2023-001263-S), CEX2023-001286-S, PDC2023-145874-I00, PID2023-147211OB-C21, PID2023-147211OB-C22, PID2021-122980OB-C54, PID2024-156385OB-I00, TED2021-130453B-C21, TED2021-130453B-C22, PID2020-112548RB-I00, PID2020-112914RB-I00, and PID2019-107727RB-I00 projects, from Generalitat de Catalunya (2021 SGR 00804, 2021-SGR-00651), and from Gobierno de Aragon (E13_23R) is acknowledged. This work has also received funding from the European Union NextGenerationEU/PRTR (grant No. CNS2022-135230) and from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No 101168161 (MASAUTO European Training Networks). Financial support by the European Research Council (2021-ERC-Advanced REMINDS Grant No. 101054687) is also acknowledged. M.G.F. is financially supported by Spanish Ministry of Science and Innovation with FPI2021 PRE2021-098067 fellowship funded by Fondo Social Europeo. W.D. is financially supported by China Scholarship Council (CSC) with No. 202208310089. W.D. and M.G.F. work has been done as a part of their Ph.D. program in Materials Science at Universitat Autònoma de Barcelona. E.M. is a Serra Húnter Fellow. C.C. acknowledges support by MICIN/AEI/10.13039/501100011033 and ERDF/EU under the grants PID2023-146623NB-I00 and PID2023-147469NB-C21 and by the Generalitat de Catalunya under the grants 2021SGR-00343, 2021SGR-01519, and 2021SGR-01411. Computational support was provided by the Red Española de Supercomputación under the grants FI-2024-1-0005, FI-2024-2-0003, and FI-2024-3-0004. Thin Films Laboratory (Raul Solanas and Victor Pardo) and X-ray Diffraction Laboratory (Anna Crespi, Joan Esquius and Francisco Javier Campos). These experiments were performed at Circe beamline at ALBA Synchrotron with the collaboration of ALBA staff. Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node Laboratorio de Microscopias Avanzadas (LMA) at Universidad de Zaragoza., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2023-001263-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2023-001286-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Leveraging the integration of perovskite BaTiO3 on ferroelectric fluorite HfO2 to enhance energy storage cyclability and efficiency

  • Dong, Wenjing
  • Magén, César
  • Zou, Jingye
  • Quintana, Alberto
  • Bachelet, Romain
  • Saint-Girons, Guillaume
  • Silva, José P.B.
  • Sánchez Barrera, Florencio
  • Fina, Ignasi
Perovskite relaxor ferroelectrics and antiferroelectrics have been the workhorse materials for energy storage electrostatic devices. Recently, there has been growing interest in ferroelectric HfO<inf>2</inf>, which is highly compatible with fabrication processes of the electronics industry and scalable down to the ultrathin limit. However, wake-up and fatigue phenomena in ferroelectric HfO<inf>2</inf> can limit the stability of energy storage capacity upon cycling. Interface engineering using simple A<inf>x</inf>O<inf>y</inf> (Ir, Ce, Ru, Al, La and Zr) binary oxides as capping layers is a promising strategy to mitigate these effects, but previous works have focused on optimizing high remanent polarization for memory applications. In contrast, for energy storage applications, the optimal parameters differ from those required for memory devices. Therefore, alternatives to A<inf>x</inf>O<inf>y</inf> capping layers must be investigated. Here, we demonstrate that the integration of the perovskite ferroelectric BaTiO<inf>3</inf> with the fluorite ferroelectric Hf<inf>0.5</inf>Zr<inf>0.5</inf>O<inf>2</inf> yields highly stable energy storage density and enhanced efficiency over cycling and at high temperatures. We study a set of samples combining epitaxial Hf<inf>0.5</inf>Zr<inf>0.5</inf>O<inf>2</inf> grown on Si(001) with polycrystalline BaTiO<inf>3</inf> of various thicknesses. The ferroelectricity of Hf<inf>0.5</inf>Zr<inf>0.5</inf>O<inf>2</inf> is preserved and the efficiency is enhanced without compromising the high breakdown voltage. The device performance is optimal for a BaTiO<inf>3</inf> thickness of 10 nm, exhibiting an energy storage density of 100 J/cm3, efficiency of 80 % and breakdown field of 12 MV/cm. We attribute this remarkable performance to the distinct electrical properties of BaTiO<inf>3</inf> compared with previously investigated A<inf>x</inf>O<inf>y</inf> capping layers. The investigations are carried out on a system that combines memory and energy storage properties, enabling the design of prospective devices in which energy recovery and memory functionalities are integrated at the chip level., Financial support from the Spanish Ministry of Science, Innovation and Universities (MCIN/AEI/10.13039/501100011033), through the Severo Ochoa MATRANS42 CEX2023–001263-S, CEX2023–001286-S, PDC2023–145874-I00, PID2023–147211OB-C21, PID2023–147211OB-C22, TED2021–130453B-C21, PID2020–112548RB-I00, PID2020–112914RB-I00, and PID2019–107727RB-I00 projects, from Generalitat de Catalunya (2021 SGR 00804) and from Regional Gobierno de Aragón through Project E13_23R is acknowledged. We also acknowledge project TED2021–130453B-C21, funded by MCIN/AEI/10.13039/501100011033. W.D. is financially supported by China Scholarship Council (CSC) with No. 202208310089. W.D. work has been done as a part of her Ph.D. program in Materials Science at Universitat Autònoma de Barcelona. https://doi.org/10.54499/2022.01740.PTDChttps://doi.org/10.54499/M-ERA-NET3/0003/2021https://doi.org/10.54499/2022.01735.CEECIND/CP1718/CT0036. This work was supported by the Portuguese Foundation for Science and Technology (FCT) in the framework of the (i) Strategic Funding UID/04650/2025 (DOI: https://doi.org/10.54499/UID/04650/2025), (ii) project 2024.12826.MIT (https://doi.org/10.54499/2024.12826.MIT) and (iii) the project M-ERA-NET3/0003/2021 - NanOx4EStor grant agreement No 958174 (https://doi.org/10.54499/M-ERA-NET3/0003/2021). J. P. B. S. also thanks FCT for the contract under the FCT Tenure program 1st edition. Thin Films Laboratory (Raul Solanas and Victor Pardo) and X-ray Diffraction Laboratory (Anna Crespi, Joan Esquius and Francisco Javier Campos)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultrathin tungsten films enabling enhanced electrical response to spin currents

  • Morales-Aragonés, José Ignacio
  • Groen, Ingen
  • Hueso, Luis E.
  • Casanova, Fèlix
  • Pardo, José A.
  • Sánchez-Azqueta, Carlos
  • Teresa, José María de
  • Sangiao, Soraya
The efficient detection of spin currents is crucial for the development of next-generation spintronic devices. Here, we demonstrate that ultrathin W layers, with thicknesses down to 2 nm— equivalent to only four atomic planes—allow for highly efficient spin-to-charge conversion. From spin pumping experiments in YIG/W bilayers, we analyzed the inverse spin Hall effect (SHE) voltage dependence on W thickness and extracted a spin Hall conductivity of σSH = −1.14(6)× 105 Ω−1 m−1, yielding effective spin Hall angles ranging from −0.27(4) to −0.88(4) over the investigated thickness range. Furthermore, assuming the Elliott–Yafet spin scattering mechanism dominates, we estimate a spin diffusion length λsd = 4.3(5)×10−15Ωm2/ρW, where the W resistivity ρW is strongly dependent on thickness. Structural characterization, together with roomtemperature electrical resistivity measurements and the high spin-to-charge conversion efficiency observed, confirms the stabilization of the β-phase in these ultrathin W layers. We demonstrate that the monotonic increase of the inverse SHE voltage with decreasing W thickness persists down to 2-nm-thick W layer, reflecting the extremely short spin diffusion length. This allows for efficient spin-current detection in W layers below 5 nm, effectively doubling the voltage output at half the thickness. In the thinnest sample, a continuous 2-nm-thick W layer, the generated voltage exceeds 0.5 mV—well within the operating range of conventional electronics. These findings demonstrate not only the feasibility of spin-current detection in ultrathin W, but also its compatibility with conventional electronics. They highlight the strong potential of integrating ultrathin W layers with high-quality YIG films for the development of energy-efficient spintronic devices and sensors., The authors acknowledge Grants PID2020-112914RB-I00, PID2021-122511OB-I00, PID2023-146451OB-I00, PID2023-150244OB-I00 and PID2024-155708OB-I00, funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU and Grants E13_23R, PROY_E29_24 and PROY_T33_24 funded by Gobierno de Aragón., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Highly-efficient growth of cobalt nanostructures using focused ion beam induced deposition under cryogenic conditions: Application to electrical contacts on graphene, magnetism and hard masking

  • Salvador-Porroche A.
  • Sangiao S.
  • Magén C.
  • Barrado M.
  • Philipp P.
  • Belotcerkovtceva D.
  • Kamalakar M.V.
  • Cea P.
  • Teresa J.M. de
Emergent technologies are required in the field of nanoelectronics for improved contacts and interconnects at nano and micro-scale. In this work, we report a highly-efficient nanolithography process for the growth of cobalt nanostructures requiring an ultra-low charge dose (15 µC cm-2, unprecedented in single-step charge-based nanopatterning). This resist-free process consists in the condensation of a ~28 nm-thick Co2(CO)8 layer on a substrate held at -100 °C, its irradiation with a Ga+ focused ion beam, and substrate heating up to room temperature. The resulting cobalt-based deposits exhibit sub-100 nm lateral resolution, display metallic behaviour (room-temperature resistivity of 200 µO cm), present ferromagnetic properties (magnetization at room temperature of 400 emu cm-3) and can be grown in large areas. To put these results in perspective, similar properties can be achieved by room-temperature focused ion beam induced deposition and the same precursor only if a 2 × 103 times higher charge dose is used. We demonstrate the application of such an ultra-fast growth process to directly create electrical contacts onto graphene ribbons, opening the route for a broad application of this technology to any 2D material. In addition, the application of these cryo-deposits for hard masking is demonstrated, confirming its structural functionality. This journal is © The Royal Society of Chemistry.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Direct epitaxial growth of polar Hf0.5 Zr0.5 O2 films on corundum

  • Barriuso, E.
  • Koutsogiannis, P.
  • Serrate, D.
  • Herrero-Martín, J.
  • Jiménez, R.
  • Magén, C.
  • Algueró, M.
  • Algarabel, P. A.
  • Pardo, J. A.
Single-phase epitaxial Hf0.5 Zr0.5 O2 films with non-centrosymmetric orthorhombic structure have been grown directly on electrode-free corundum (a-Al2 O3) substrates by pulsed laser deposition. A combination of high-resolution X-ray diffraction and X-ray absorption spectroscopy confirms the epitaxial growth of high-quality films belonging to the Pca21 space group, with 111] out-of-plane orientation. The surface of a 7-nm-thick sample exhibits an atomic step-terrace structure with a corrugation of the order of one atomic layer, as proved by atomic force microscopy. Scanning transmission electron microscopy reveals that it consists of grains with around 10 nm lateral size. The polar nature of this film has been corroborated by pyroelectric measurements. These results shed light on the mechanisms of the epitaxial stabilization of the ferroelectric phase of hafnia. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Spin to charge conversion in chemically deposited epitaxial La0.9MnO3 thin films capped with Pt

  • Martin-Rio, Sergi
  • Pomar, Alberto
  • Frontera, Carlos
  • Wang, Hailin
  • Manzorro, Ramon
  • Magen, Cesar
  • Balcells, Lluis
  • Mestres, Narcis
  • Martinez, Benjamin
Spin to charge conversion process in a broad range of temperatures is studied in La0.92MnO3/Pt bilayers prepared by polymer-assisted deposition (PAD). It is shown that an excellent LMO/Pt interface can be obtained in spite of using ex situ deposition of the Pt layer. The values obtained for the effective spin-mixing conductance, g up arrow down arrow(eff) = 0.76 x 10(15) cm(-2), suggest that significant spin transport across the LMO/Pt interface could be achieved. Spin pumping experiments generate a transversal voltage signal V-ISHE, due to spin to charge conversion via inverse spin Hall effect, that has been detected down to about 100 K with values of the spin-Hall angle, theta(SH), of about 2.5%, slightly decreasing on reducing temperature in the analyzed temperature range. These results indicate that LMO is a promising perovskite building block for all-oxide multifunctional high-frequency spintronics devices and that PAD technique provides oxide epitaxial thin films of good quality adequate for spintronic applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Reseña (Review)

Superconducting materials and devices grown by focused ion and electron beam induced deposition

  • Orús, P.
  • Sigloch, F.
  • Sangiao, S.
  • Teresa, J. M. de
Since its discovery in 1911, superconductivity has represented an equally inciting and fascinating field of study in several areas of physics and materials science, ranging from its most fundamental theoretical understanding, to its practical application in different areas of engineering. The fabrication of superconducting materials can be downsized to the nanoscale by means of Focused Ion/Electron Beam Induced Deposition: nanopatterning techniques that make use of a focused beam of ions or electrons to decompose a gaseous precursor in a single step. Overcoming the need to use a resist, these approaches allow for targeted, highly-flexible nanopatterning of nanostructures with lateral resolution in the range of 10 nm to 30 nm. In this review, the fundamentals of these nanofabrication techniques are presented, followed by a literature revision on the published work that makes use of them to grow superconducting materials, the most remarkable of which are based on tungsten, niobium, molybdenum, carbon, and lead. Several examples of the application of these materials to functional devices are presented, related to the superconducting proximity effect, vortex dynamics, electric-field effect, and to the nanofabrication of Josephson junctions and nanoSQUIDs. Owing to the patterning flexibility they offer, both of these techniques represent a powerful and convenient approach towards both fundamental and applied research in superconductivity. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Magnetic functionalization of scanning probes by focused electron beam induced deposition technology

  • Pablo-Navarro, J.
  • Sangiao, S.
  • Magén, C.
  • Teresa, J.M. de
The fabrication of nanostructures with high resolution and precise control of the deposition site makes Focused Electron Beam Induced Deposition (FEBID) a unique nanolithography process. In the case of magnetic materials, apart from the FEBID potential in standard substrates for multiple applications in data storage and logic, the use of this technology for the growth of nanomagnets on different types of scanning probes opens new paths in magnetic sensing, becoming a benchmark for magnetic functionalization. This work reviews the recent advances in the integration of FEBID magnetic nanostructures onto cantilevers to produce advanced magnetic sensing devices with unprecedented performance. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Superconducting W-C nanopillars fabricated by Ga+ focused ion beam induced deposition

  • Orús, Pablo
  • Sigloch, Fabian
  • Sangiao, Soraya
  • De Teresa, José María
Ga+ Focused Ion Beam Induced Deposition (FIBID) is a highly flexible, single-step nanopatterning technique that makes use of a focused beam of Ga+ ions to locally induce the decomposition of a gaseous precursor material. In combination with the W(CO)6 precursor, Ga+ FIBID is known to yield a W–C compound that is superconducting below 4.7 ​K. While most reports on Ga+ FIBID-grown W–C focus on in-plane patterning, we demonstrate here that growth along the vertical direction may also be achieved by successively stacking a series of individual patterns that get deposited on top of each other. The nanopillars obtained following this procedure reach up to 10 ​μm in height, and have an aspect ratio of around 50. They exhibit a 68% of metallic W in terms of atomic content, higher than the 40% detected in their in-plane counterparts, while maintaining the superconducting properties. This approach also opens up the possibility of tuning their height and growth angle with respect to the substrate, exhibiting potential applicability in the design of 3D superconducting devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High-Throughput Direct Writing of Metallic Micro- and Nano-Structures by Focused Ga+Beam Irradiation of Palladium Acetate Films; 35671475

  • Salvador-Porroche, Alba
  • Herrer, Lucía
  • Sangiao, Soraya
  • Philipp, Patrick
  • Cea, Pilar
  • De Teresa, José María
Metallic nanopatterns are ubiquitous in applications that exploit the electrical conduction at the nanoscale, including interconnects, electrical nanocontacts, and small gaps between metallic pads. These metallic nanopatterns can be designed to show additional physical properties (optical transparency, plasmonic effects, ferromagnetism, superconductivity, heat evacuation, etc.). For these reasons, an intense search for novel lithography methods using uncomplicated processes represents a key on-going issue in the achievement of metallic nanopatterns with high resolution and high throughput. In this contribution, we introduce a simple methodology for the efficient decomposition of Pd3(OAc)6 spin-coated thin films by means of a focused Ga+ beam, which results in metallic-enriched Pd nanostructures. Remarkably, the usage of a charge dose as low as 30 µC/cm2 is sufficient to fabricate structures with a metallic Pd content above 50% (at.) exhibiting low electrical resistivity (70 µ¿·cm). Binary-collision-approximation simulations provide theoretical support to this experimental finding. Such notable behavior is used to provide three proof-of-concept applications: (i) creation of electrical contacts to nanowires, (ii) fabrication of small (40 nm) gaps between large metallic contact pads, and (iii) fabrication of large-area metallic meshes. The impact across several fields of the direct decomposition of spin-coated organometallic films by focused ion beams is discussed. © 2022 The Authors. Published by American Chemical Society.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Direct-write of tungsten-carbide nanoSQUIDs based on focused ion beam induced deposition

  • Sigloch, Fabian
  • Sangiao, Soraya
  • Orús, Pablo
  • de Teresa, José M.
NanoSQUIDs are quantum sensors that excel in detecting a small change in magnetic flux with high sensitivity and high spatial resolution. Here, we employ resist-free direct-write Ga+ Focused Ion Beam Induced Deposition (FIBID) techniques to grow W–C nanoSQUIDs, and we investigate their electrical response to changes in the magnetic flux. Remarkably, FIBID allows the fast (3 min) growth of 700 nm × 300 nm nanoSQUIDs based on narrow nanobridges (50 nm wide) that act as Josephson junctions. Albeit the SQUIDs exhibit a comparatively low modulation depth and obtain a high inductance, the observed transfer coefficient (output voltage to magnetic flux change) is comparable to other SQUIDs (up to 1300 μV/Φ0), which correlates with the high resistivity of W–C in the normal state. We discuss here the potential of this approach to reduce the active area of the nanoSQUIDs to gain spatial resolution as well as their integration on cantilevers for scanning-SQUID applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Low-resistivity Pd nanopatterns created by a direct electron beam irradiation process free of post-treatment steps

  • Salvador-Porroche, Alba
  • Herrer, Lucia
  • Sangiao, Soraya
  • de Teresa, Jose Maria
  • Cea, Pilar
Abstract The ability to create metallic patterned nanostructures with excellent control of size, shape and spatial orientation is of utmost importance in the construction of next-generation electronic and optical devices as well as in other applications such as (bio)sensors, reactive surfaces for catalysis, etc. Moreover, development of simple, rapid and low-cost fabrication processes of metallic patterned nanostructures is a challenging issue for the incorporation of such devices in real market applications. In this contribution, a direct-write method that results in highly conducting palladium-based nanopatterned structures without the need of applying subsequent curing processes is presented. Spin-coated films of palladium acetate were irradiated with an electron beam to produce palladium nanodeposits (PdNDs) with controlled size, shape and height. The use of different electron doses was investigated and its influence on the PdNDs features determined, namely: (1) thickness of the deposits, (2) atomic percentage of palladium content, (3) oxidation state of palladium in the deposit, (4) morphology of the sample and grain size of the Pd nanocrystals and (5) resistivity. It has been probed that the use of high electron doses, 30000 μC·cm-2 results in the lowest resistivity reported to date for PdNDs, namely 145.1 μΩ·cm, which is only one order of magnitude higher than metallic palladium. This result paves the way for development of simplified lithography processes of nanostructured deposits avoiding subsequent post-treatment steps.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Nanoscale direct-write fabrication of superconducting devices for application in quantum technologies

  • De Teresa, José María
In this Perspective article, we evaluate the current state of research on the use of focused electron and ion beams to directly fabricate nanoscale superconducting devices with application in quantum technologies. First, the article introduces the main superconducting devices and their fabrication by means of standard lithography techniques such as optical lithography and electron beam lithography. Then, focused ion beam patterning of superconductors through milling or irradiation is shown, as well as the growth of superconducting devices by means of focused electron and ion beam induced deposition. We suggest that the key benefits of these resist-free direct-growth techniques for quantum technologies include the ability to make electrical nanocontacts and circuit edit, fabrication of high-resolution superconducting resonators, creation of Josephson junctions and superconducting quantum interference device (SQUIDs) for on-tip sensors, patterning of high-Tc SQUIDs and other superconducting circuits, and the exploration of fluxtronics and topological superconductivity.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Improved polarization-retention-endurance in Hf0.5Zr0.5O2 films by ZrO2 capping via electrostatic effects

  • Song, Tingfeng
  • Koutsogiannis, Panagiotis
  • Magén, César
  • Pardo, José A.
  • Sánchez, Florencio
  • Fina, Ignasi
Ferroelectric hafnia is one of the most promising materials for next generation of non‐volatile memory devices. Several strategies have demonstrated to be of interest to improve its functional properties. Interface engineering, realized by the introduction of additional layer in the capacitor structure, is demonstrated as a promising strategy. However, interface layers can have multiple implications, such as changes in the chemistry of the interfaces and an increase of depolarization field, whose effects are difficult to discriminate. The role of HfO2 and ZrO2 capping is explored on polarization, retention, endurance, and leakage properties of Hf0.5Zr0.5O2 epitaxial films. In HfO2 capped films, lower polarization is observed, and endurance and retention are also comparably worse than in ZrO2 capped films. Complementary under illumination ferroelectric characterization and capacitance measurements indicate a reduction of defects and interface capacitance contribution in ZrO2 capped films. For both cappings, the interfaces with the Hf0.5Zr0.5O2 layer are shown to be compositionally sharp and the phase of Hf0.5Zr0.5O2 (HZO) grains is replicated on the capping layer, indicating that electrostatic effects prevail and that the use of interface layers with high permittivity, here ZrO2, is crucial to favor good functional properties.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Engineering polar distortions in multiferroic Sr1-xBaxMnO3-d thin films

  • Koutsogiannis, Panagiotis
  • Algarabel, Pedro A.
  • Pardo, José A.
  • Magén, César
The physical properties of perovskite oxide thin films are governed by the subtle interplay between chemical composition and crystal symmetry variations, which can be altered by epitaxial growth. In the case of perovskite-type multiferroic thin films, precise control of stoichiometry and epitaxial strain allows for gaining control over the ferroic properties through selective crystal distortions. Here, we demonstrate the chemical tailoring of the polar atomic displacements by tuning the stoichiometry of multiferroic Sr1−xBaxMnO3−δ (0 ≤ x ≤ 0.5) epitaxial thin films. A combination of x-ray diffraction and aberration-corrected scanning transmission electron microscopy enables unraveling the local polarization orientation at the nanoscale as a function of the film’s composition and induced crystalline structure. We demonstrate experimentally that the orientation of polarization is intimately linked to the Ba doping and O stoichiometry of the films and, with the biaxial strain induced by the substrate, it can be tuned either in-plane or out-of-plane with respect to the substrate by the appropriate choice of the post-growth annealing temperature and O2 atmosphere. This chemistry-mediated engineering of the polarization orientation of oxide thin films opens new venues for the design of functional multiferroic architectures and the exploration of novel physics and applications of ferroelectric textures with exotic topological properties.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Cryo-focused ion beam-induced deposition of tungsten–carbon nanostructures using a thermoelectric plate

  • Orús, P.
  • Sigloch, F.
  • Sangiao, S.
  • Teresa Nogueras, J.M. de
Focused Ion Beam-Induced Deposition (FIBID) is a single-step nanopatterning technique that applies a focused beam of ions to induce the decomposition of a gaseous precursor. The processing rate of FIBID increases by two orders of magnitude when the process is performed at cryogenic temperatures (Cryo-FIBID): the precursor forms a condensed layer on the surface of the cooled substrate, greatly enhancing the amount of material available for decomposition. Cryo-FIBID has been achieved so far by making use of liquid nitrogen-based cooling circuits, which require the passage of a flowing gas as a cooling agent. Here, the Cryo-FIBID of the W(CO)6 precursor is performed using a coolant-free thermoelectric plate utilizing the Peltier effect. Performed at-60 ºC, the procedure yields a W–C-based material with structural and electrical properties comparable to those of its counterpart grown in coolant-based Cryo-FIBID. The use of the thermoelectric plate significantly reduces the vibrations and sample drift induced by the flow of passing coolant gas and allows for the fabrication of similar nanostructures. In summary, the reported process represents a further step towards the practical implementation of the Cryo-FIBID technique, and it will facilitate its use by a broader research community. © 2020 by the authors. Licensee MDPI, Basel, Switzerland.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Gas-Phase Synthesis of Iron Silicide Nanostructures Using a Single-Source Precursor: Comparing Direct-Write Processing and Thermal Conversion

  • Jungwirth, Felix
  • Salvador-Porroche, Alba
  • Porrati, Fabrizio
  • Jochmann, Nicolas P.
  • Knez, Daniel
  • Huth, Michael
  • Gracia, Isabel
  • Cané, Carles
  • Cea, Pilar
  • De Teresa, José María
  • Barth, Sven
The investigation of precursor classes for the fabrication of nanostructures is of specific interest for maskless fabrication and direct nanoprinting. In this study, the differences in material composition depending on the employed process are illustrated for focused-ion-beam- and focused-electron-beam-induced deposition (FIBID/FEBID) and compared to the thermal decomposition in chemical vapor deposition (CVD). This article reports on specific differences in the deposit composition and microstructure when the (H3Si)2Fe(CO)4 precursor is converted into an inorganic material. Maximum metal/metalloid contents of up to 90 at. % are obtained in FIBID deposits and higher than 90 at. % in CVD films, while FEBID with the same precursor provides material containing less than 45 at. % total metal/metalloid content. Moreover, the Fe:Si ratio is retained well in FEBID and CVD processes, but FIBID using Ga+ ions liberates more than 50% of the initial Si provided by the precursor. This suggests that precursors for FIBID processes targeting binary materials should include multiple bonding such as bridging positions for nonmetals. In addition, an in situ method for investigations of supporting thermal effects of precursor fragmentation during the direct-writing processes is presented, and the applicability of the precursor for nanoscale 3D FEBID writing is demonstrated.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Indium segregation in Gd-5(Si, Ge)(4) magnetocaloric materials

  • Belo, J.H.
  • Mudryk, Y.
  • Pereira, A.M.
  • Oliveira, G.N.P.
  • Lopes, A.M.L.
  • Paudyal, D.
  • Morellon, L.
  • Algarabel, P.A.
  • Magen, C.
  • Ibarra, M.R.
  • Marcano, N.
  • Pecharsky, V.K.
  • Araújo, J.P.
Chemical substitution is one of the most efficient tools to tune and optimize magnetic and magnetocaloric properties of the giant magnetocaloric materials. In particular, Indium substitutions could be useful both for tuning properties of these interesting intermetallic materials and to unveil their local-scale behavior across the magnetostructural transition via hyperfine techniques. Hence, in order to investigate the effect of Indium additions on the crystal structure, micro-structure, magnetic and magnetocaloric properties, a series of In-containing samples derived from the base Gd5Si1.2Ge2.8 stoichiometry were prepared. The major findings are that while In is insoluble in the 5: 4 phase, it will instead promote the emergence of the impurity 5: 3 phase and segregates into this phase. Hence, In leads to major crystallographic changes, which enhance atomic disorder and disrupt the Si to Ge ratio in the 5: 4 phase. Subsequently, a higher 5: 4 unit cell volume and a lower magnetic ordering temperature are found in the In-substituted samples. Finally, the magnetocaloric properties of the In-substituted samples reveal a detrimental effect on the maximum magnetic entropy change.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

FIB-fabrication of superconducting devices based on Bi2Se3 junctions

  • Gracia-Abad, Rubén
  • Sangiao, Soraya
  • Balakrishnan, Geetha
  • De Teresa, José María
Recent advances in quantum technologies are highly influencing the current technological scenario. Hybrid devices combining superconductors and topological insulators represent an excellent opportunity to study the topological superconducting phase, which offers interesting features that might have significant implications in the development of quantum sensing and quantum computing. Furthermore, focused ion beam techniques, whose versatility enables to create sophisticated devices with high degree of customization, can enhance the creation of complex devices. Here, we develop a novel approach for creating single-crystal devices that is applied to the fabrication of superconducting devices based on topological insulator Bi2Se3 in a geometry characteristic of a superconducting quantum interference device. Characterization of these devices reveals that superconductivity is induced in our crystal and the supercurrent is modulated by applying an external magnetic field. These results open the way to tailoring the response of hybrid devices that combine superconductors and topological insulators by focused ion beam techniques.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Atomic-Scale Characterization of 180° Conductive Domain Walls in PbZr<sub>0.1</sub>Ti<sub>0.9</sub>O<sub>3</sub>

  • Koutsogiannis, Panagiotis
  • Risch, Felix
  • Pardo, José A.
  • Stolichnov, Igor
  • Magén, César
Conductive domain walls (DWs) in ferroic materials have emerged as promising candidates for applications in nanoelectronics due to their unique properties such as high conductivity and nonvolatility. In this study, we investigate the atomic structure and conductivity of nominally neutral 180° DWs artificially created in an epitaxial thin film of tetragonal PbZr0.1Ti0.9O3. Using piezoresponse force microscopy and scanning transmission electron microscopy, we elucidate the complex structure of these 180° DWs and their coupling with ferroelastic domains, revealing that they exhibit a complex structure due to the strain-mediated interplay with the ferroelastic domains. Our results demonstrate that the 180° DWs conductivity is associated with the emergence of polar discontinuities, including the formation of tail-to-tail charged segments, which has been further confirmed by electron energy loss spectroscopy. Additionally, we investigated the long-term performance of these domain boundaries, demonstrating their unique mobility and structural stability. Our findings provide insights into the atomic-scale mechanisms that turn nominally neutral DWs into highly conductive channels, paving the way for their use in advanced nanoelectronic devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Spin conduction and interfacial effects in La2/3Sr1/3MnO3/NiO/Pt heterostructures

  • Chen, S.
  • Pomar, A.
  • Balcells, Ll.
  • Konstantinovic, Z.
  • Frontera, C.
  • Magén, C.
  • Mestres, N.
  • Martinez, B.
In this work we report on the generation and transport of pure spin currents in La2/3Sr1/3MnO3(LSMO)/NiO/Pt heterostructures. Pure spin currents, generated by means of spin pumping in the LSMO layer, are transmitted through the NiO layer and detected by measuring the transverse voltage signal generated by the inverse spin Hall effect (ISHE) in the Pt layer. The spin current transmission is studied as a function of the NiO thickness and temperature. NiO layers grown at room temperature are polycrystalline and their microstructural and magnetic features clearly depend on thickness. Scanning transmission electron microscopy techniques revealed that homogeneous conformal coating of the LSMO layer is only achieved for NiO layer thicknesses above about 2 nm. Below this critical thickness the NiO layer is discontinuous and its main role would be to disturb the LSMO/Pt interface causing it to behave as something similar to an insulating barrier. Magnetic measurements indicate that NiO layers are paramagnetic (PM) well below room temperature. In agreement with these observations, the amplitude of the ISHE voltage signal decreases monotonically on lowering temperature and makes evident that there are two spin conduction regimes as a function of the NiO layer thickness with different spin diffusion lengths. For thin discontinuous NiO layers a spin diffusion length of λSDL≈0.8 nm is found, which is slightly larger than typical values found for insulating barriers, but definitely smaller than λSDL≈3.8 nm found for NiO layer thickness above 2 nm. The latter being similar to λSDL previously reported for epitaxial NiO layers. Our findings indicate that inserting a PM NiO insulating layer of optimal thickness improves the spin transparency of the LSMO/Pt interface. Additionally, the results suggest that spin conduction through the NiO layer is likely driven by magnetic correlations and short-range thermal magnons.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Transition of laser-induced terahertz spin currents from torque- to conduction-electron-mediated transport

  • Jiménez-Cavero, Pilar
  • Gueckstock, Oliver
  • Nádvorník, Lukas
  • Lucas, Irene
  • Seifert, Tom S.
  • Wolf, Martin
  • Rouzegar, Reza
  • Brouwer, Piet W.
  • Becker, Sven
  • Jakob, Gerhard
  • Kläui, Mathias
  • Guo, Chenyang
  • Wan, Caihua
  • Han, Xiufeng
  • Jin, Zuanming
  • Zhao, Hui
  • Wu, Di
  • Morellón, Luis
  • Kampfrath, Tobias
Spin transport is crucial for future spintronic devices operating at bandwidths up to the terahertz range. In F|N thin-film stacks made of a ferromagnetic/ferrimagnetic layer F and a normal-metal layer N, spin transport is mediated by (1) spin-polarized conduction electrons and/or (2) torque between electron spins. To identify a crossover from (1) to (2), we study laser-driven spin currents in F|Pt stacks where F consists of model materials with different degrees of electrical conductivity. For the magnetic insulators yttrium iron garnet, gadolinium iron garnet (GIG) and ¿-Fe2O3, identical dynamics is observed. It arises from the terahertz interfacial spin Seebeck effect (SSE), is fully determined by the relaxation of the electrons in the metal layer, and provides a rough estimate of the spin-mixing conductance of the GIG/Pt and ¿-Fe2O3/Pt interfaces. Remarkably, in the half-metallic ferrimagnet Fe3O4 (magnetite), our measurements reveal two spin-current components with opposite direction. The slower, positive component exhibits SSE dynamics and is assigned to torque-type magnon excitation of the A- and B-spin sublattices of Fe3O4. The faster, negative component arises from the pyrospintronic effect and can consistently be assigned to ultrafast demagnetization of minority-spin hopping electrons. This observation supports the magneto-electronic model of Fe3O4. In general, our results provide a route to the contact-free separation of torque- and conduction-electron-mediated spin currents. © 2022 authors. Published by the American Physical Society.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Position-sensitive domain-by-domain switchable ferroelectric memristor

  • Risch, Felix
  • Koutsogiannis, Panagiotis
  • Tikhonov, Yuri
  • Razumnaya, Anna G.
  • Magén, César
  • Pardo, José A.
  • Lukyanchuk, Igor
  • Stolichnov, Igor
Domain-wall electronics based on the tunable transport in reconfigurable ferroic domain interfaces offer a promising platform for in-memory computing approaches and reprogrammable neuromorphic circuits. While conductive domain walls have been discovered in many materials, progress in the field is hindered by high-voltage operations, stability of the resistive states and limited control over the domain wall dynamics. Here, we show nonvolatile memristive functionalities based on precisely controllable conductive domain walls in tetragonal Pb(Zr,Ti)O3 thin films within a two-terminal parallel-plate capacitor geometry. Individual submicron domains can be manipulated selectively by position-sensitive low-voltage operations to address distinct resistive states with nanoampere-range conduction readout. Quantitative phase-field simulations reveal a complex pattern of interpenetrating a- and c-domain associated with the formation of 2D conducting layers at the intertwined regions and the emergence of 3D percolation channels of extraordinary high conductivity. Subnanometer resolution polarization mapping experimentally proves the existence of such extensive segments of charged tail-to-tail domain walls with unconventional structure at the ferroelastic-ferroelectric domain boundaries.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Spin waves in Co2FeGe films

  • Popadiuk, Dariia
  • Vovk, Andriy
  • Bunyaev, Sergey A.
  • Kakazei, Gleb N.
  • Araújo, João P.
  • Strichovanec, Pavel
  • Algarabel, Pedro A.
  • Golub, Vladimir
  • Kravets, Anatolii F.
  • Korenivski, Vladislav
  • Trzaskowska, Aleksandra
The dynamic magnetic properties of full Heusler alloy thin films of CoFeGe, grown on MgO (001) substrates under different thermal conditions, were investigated. Brillouin light scattering and ferromagnetic resonance measurements revealed that depositing at room temperature followed by annealing at 300 C for 1 h produces the best results for maximizing magnetization, exchange stiffness, and minimizing spin-dynamic dissipation in the films, which are desirable characteristics for high-speed spintronic devices. Additionally, strong hybridization of spin waves in the Damon–Eshbach geometry was observed, which is attractive for applications in magnonic signal processing circuits.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Method for extraction of microcrystals based on focused electron/ion beam processing and their magnetotransport characterization

  • Sáenz-Hernández, Amaia
  • Sangiao, Soraya
  • Balakrishnan, Geetha
  • De Teresa, José María
We propose a new in situ microfabrication method using focused electron/ion beam processing to study the influence of crystal orientation on magnetotransport properties. Previous studies obtained microcrystals extracted from bulk single crystals with the out-of-plane crystallographic axis [símbolo] perpendicular to the applied magnetic field [símbolo] and parallel to the current flow. The new method orients [símbolo] parallel to [símbolo] and perpendicular to the current. Magnetotransport measurements at 2 K on Bi2Se3 samples fabricated using both methods reveal differences in zero-field resistivity and charge carrier mobility, demonstrating the impact of the crystal orientation in which the microcrystal is extracted on the electrical transport properties.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Hierarchical domain structures in buckled ferroelectric free sheets

  • Pesquera, David
  • Cordero-Edwards, Kumara
  • Checa, Marti
  • Ivanov, Ilia
  • Casals, Blai
  • Rosado, Marcos
  • Caicedo, José Manuel
  • Casado-Zueras, Laura
  • Pablo-Navarro, Javier
  • Magén, César
  • Santiso, José
  • Domingo, Neus
  • Catalan, Gustau
  • Sandiumenge, Felip
Flat elastic sheets tend to display wrinkles and folds. From pieces of clothing down to two-dimensional crystals, these corrugations appear in response to strain generated by sheet compression or stretching, thermal or mechanical mismatch with other elastic layers, or surface tension. Extensively studied in metals, polymers and, — more recently — in van der Waals exfoliated layers, with the advent of thin single crystal freestanding films of complex oxides, researchers are now paying attention to novel microstructural effects induced by bending ferroelectric-ferroelastics, where polarization is strongly coupled to lattice deformation. Here we show that wrinkle undulations in BaTiO3 sheets bonded to a viscoelastic substrate transform into a buckle delamination geometry when transferred onto a rigid substrate. Using spatially resolved techniques at different scales (Raman, scanning probe and electron microscopy), we show how these delaminations in the free BaTiO3 sheets display a self-organization of ferroelastic domains along the buckle profile that strongly differs from the more studied sinusoidal wrinkle geometry. Moreover, we disclose the hierarchical distribution of a secondary set of domains induced by the misalignment of these folding structures from the preferred in-plane crystallographic orientations. Our results disclose the relevance of the morphology and orientation of buckling instabilities in ferroelectric free sheets, for the stabilization of different domain structures, pointing to new routes for domain engineering of ferroelectrics in flexible oxide sheets.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Yttrium: A Highly Efficient Dopant for Ferroelectric HfO<sub>2</sub>

  • Ghiasabadi Farahani, Mehrdad
  • Magén, César
  • Quintana, Alberto
  • Fina, Ignasi
  • Sánchez, Florencio
The ferroelectric phase of HfO2 is metastable, and its stabilization in thin films strongly depends on both doping and microstructure. Optimally doped films exhibit high ferroelectric polarization; however, it typically decreases rapidly with increasing film thickness. In contrast to these usual results, a few exceptions report ferroelectricity in thick films with specific dopants, such as Y or La, crystallized under conditions that favor granular microstructure. Disentangling the roles of microstructure and doping on the thickness-dependent stability of ferroelectricity remains essential, and identifying highly effective dopant atoms is of high relevance. In this work, Y-doped epitaxial films of various thicknesses up to about 100 nm are prepared to determine phase evolution and ferroelectric polarization. Films deposited on SrTiO3(001) and SrTiO3(110) substrates exhibit robust ferroelectric response across the entire thickness range, in contrast to equivalent La-doped films. Coexistence of monoclinic (paraelectric) and orthorhombic (ferroelectric) phases is observed, with columnar grains revealed by scanning transmission electron microscopy, demonstrating that the microstructure of epitaxial HfO2 films can be preserved beyond 10 nm. The observed columnar grain structure indicates that the robustness of ferroelectricity in Y-doped films results from the high effectiveness of Y, supporting its use in devices requiring thick ferroelectric layers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Strain Relief and Domain Architecture in Epitaxial NiO Filmson La 2/3 Sr1/3 MnO3 /SrTiO3 for Spin-Transport Engineering

  • Chen, Shoulong
  • Frontera, Carlos
  • Toda-Casaban, Meritxell
  • Pomar, Alberto
  • Balcells, Lluis
  • Konstantinovic, Zorica
  • Magén, César
  • Martínez, Benjamín
  • Mestres, Narcís
This study reports on the epitaxial growth and structural characterization of ultrathin NiO‐films deposited by magnetron sputtering on La2/3Sr1/3MnO3 (LSMO) films grown on SrTiO3 (STO) substrates with (001)‐ and (111)‐orientations. X‐ray diffraction and atomic‐force microscopy show that all NiO layers are single‐phase, face‐centered pseudo‐cubic, atomically smooth, root‐main‐square (RMS) surface roughness <0.15 nm, and form abrupt interfaces with LSMO. High‐resolution reciprocal‐space maps reveal that the films are largely relaxed, but exhibit a slight compressive distortion, yielding unit‐cell volumes larger than bulk NiO. Despite a nominal ≈7% lattice mismatch, aberration‐corrected scanning transmission electron microscopy uncovers an array of misfit dislocations at the NiO/LSMO interface that help to accommodate strain allowing epitaxial growth of NiO layers. On (001)‐oriented samples, the four antiferromagnetic T‐domains are oblique to the sample plane, while on the (111) case, one lies in‐plane. This in‐plane domain shows greater spacing between ferromagnetic (111) planes due to unit cell distortion. This structural domain splitting can influence magnetic order and spin transmission efficiency, highlighting crystallographic orientation as a key factor in designing high‐performance spintronic devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Evolution at the nanoscale of magnetic clustering of the Griffiths-like phase in Tb4.925La0.075Si2Ge2

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Cryogenic Focused Ion Beam Milling to Investigate the Anisotropic Magnetotransport Properties of Bismuth Microcrystals

  • Sáenz-Hernández, Amaia
  • Sangiao, Soraya
  • Felser, Claudia
  • Shekhar, Chandra
  • Pardo, José Ángel
  • Ibarra, Alfonso
  • De Teresa, José María
Bulk single crystals exhibit the intrinsic properties of a given compound, but studying their anisotropic magnetotransport properties is challenging. Focused Ion Beam (FIB) milling at room temperature has been previously used to guide the electrical current path along a defined crystal direction or to extract microcrystals where the electrical current flows along a known direction. However, some materials, such as bismuth, melt under FIB irradiation. Bismuth, known for its unique properties, including very large magnetoresistance and a highly anisotropic Fermi surface, reacts to room‐temperature Ga+ FIB irradiation, forming droplets on its surface. Therefore, a novel microfabrication approach based on cryogenic FIB milling is developed here. By using a Peltier stage or an integrated cryogenic module, surface melting is mitigated below −30 °C. Microscale slabs are extracted, either parallel or perpendicular to the single crystal surface, then shaped and electrically contacted in a chip for magnetotransport characterization. The large magnetoresistance observed along with Shubnikov–de Haas oscillations with single periodicity when current is applied perpendicular to the c axis, highlights the success of the approach. These results enable FIB microfabrication of single crystals that are sensitive to FIB irradiation and investigation of the anisotropic magnetotransport properties in microcrystals.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Crystallographic Engineering of Spin Transport in Antiferromagnetic NiO Thin Films

  • Chen, Shoulong
  • Pomar, Alberto
  • Balcells, Lluis
  • Konstantinovic, Zorica
  • Bozzo, Bernat
  • Frontera, Carlos
  • Magen, César
  • Mestres, Narcis
  • Martínez, Benjamin
In this work, we investigate how the crystallographic growth direction influences spin current transmission in antiferromagnetic (AF) NiO thin films. By manipulating epitaxial growth, we explored the spin transport characteristics in La2/3Sr1/3MnO3/NiO/Pt heterostructures grown on top of (001)- and (111)-oriented SrTiO3 substrates, varying the NiO barrier thickness (tNiO). Spin currents were generated via spin pumping (SP), and detection was done by the inverse spin Hall effect (ISHE). X-ray diffraction and high-resolution electron microscopy techniques confirmed high-quality epitaxial films with nearly atomically sharp interfaces and similar dislocation distributions, irrespective of the growth direction. Nevertheless, epitaxially engineered (111) heterostructures exhibited superior spin transport properties, including lower magnetic damping (α), longer spin diffusion lengths (λSd), and higher spin mixing conductance (g↑↓). The temperature dependence of the ISHE voltage signal (VISHE) also showed orientation-dependent behavior: while (001)-oriented samples followed a monotonic trend, (111)-oriented samples displayed a peak that shifted to higher temperatures with increasing tNiO, associated with the emergence of AF ordering. Moreover, (111)-oriented samples demonstrated notable spin current amplification at room temperature, peaking at tNiO ≈ 1 nm before decaying quasi-exponentially, indicative of spin diffusion-mediated conduction. Although the spin diffusion length in (111)-oriented samples was roughly double that of their (001)-oriented counterparts, it was still too short to be explained by angular momentum transport by mobile antiferromagnons through NiO. Instead, these findings point to a mechanism involving magnetic correlations and short-range thermal magnons. The superior spin transport properties and the enhanced spin conduction in (111)-oriented samples are primarily attributed to a synergistic combination of interfacial and dynamic effects, a more favorable Néel vector alignment and distinct interface symmetry, which can enhance spin-Hall effects or enable different spin textures. Overall, this study underscores the pivotal role of the Néel vector and crystallographic orientation in AF spin transport, providing valuable insights for the design and optimization of spintronic devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Infrared phonons in monoclinic Hf0.5Zr0.5O2 thin films

  • Železný, V.
  • de Prado, E.
  • Barriuso, E.
  • Algarabel, P. A.
  • Pardo, J. A.
  • Kamba, S.
Infrared (IR) reflectance spectra of monoclinic Hf0.5Zr0.5O2 (HZO) films with thickness in the range of 10–90 nm deposited on different cuts of Al2O3 and yttria-stabilized zirconia (YSZ) substrates were measured in the frequency region 30–4000 cm−1. Several phonons belonging to HZO were observed even for the 10 nm films. X-ray diffraction measurements were used to determine the crystal structure of the films and their orientation with respect to the substrates. The phonon spectra of HZO films grown on the anisotropic (11¯02) R-cut Al2O3 substrates exhibit strong anisotropy. Comparing them with the spectra of the films on isotropic YSZ substrates, it allows us to assign the symmetry and polarization of the phonons in HZO films. Fitting the IR spectra by the classical Lorentz model, we obtain the phonon parameters, their response functions, and their contribution to static permittivity. We also measured the IR reflectance of HfO2, ZrO2  and HZO ceramics and compared their phonon parameters with those of the corresponding thin films.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Electronically Driven Magnetoelectric Coupling in Co/La:Hf0.5Zr0.5O2 Heterostructures for Energy-Efficient Neuromorphic Computing

  • Quintana, Alberto
  • Magen, Cesar
  • Ghiasabadi Farahani, Mehrdad
  • Dong, Wenjing
  • Zou, Jingye
  • Dix, Nico
  • Ma, Zheng
  • Menéndez, Enric
  • Foerster, Michael
  • Niño, Miguel Angel
  • Cazorla, Claudio
  • Sort, Jordi
  • Sánchez, Florencio
  • Fina, Ignasi
Magnetoelectric materials enable low-power memory devices by leveraging the electric control of magnetization. The discovery of ferroelectricity in doped hafnia has unlocked further opportunities since the distinct ferroelectric switching mechanism in this material can enable robust and multilevel modulation of magnetization by electric field, if combined with appropriate magnetic materials. Here, we demonstrate a 5% electric field-induced modulation of the saturation magnetization in a cobalt layer, driven by ferroelectric switching of an adjacent epitaxial La(1%):Hf0.5Zr0.5O2 film. Dichroic imaging with synchrotron radiation confirms that ferroelectric switching induces a magnetic change. We show that the response time is faster than 500 ns (limited by the setup time resolution threshold) and that energy consumption is 6 nJ. This low energy consumption is mainly enabled by the absence of relevant leakage current contribution (10 nA/cm2 at 500 mV). The found response time and energy-efficient behavior point to the presence of an electronically driven modulation of magnetism (i.e., conventional magnetoelectric effects), which is confirmed by theoretical calculations and compositional analysis. Additionally, a multilevel magnetoelectric response is observed, enabling neuromorphic-like behavior. The demonstration of magnetoelectric coupling in a system based on CMOS-compatible materials offers a viable route toward the development of low-power beyond von-Neumann technologies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Leveraging the integration of perovskite BaTiO3 on ferroelectric fluorite HfO2 to enhance energy storage cyclability and efficiency

  • Dong, Wenjing
  • Magén, César
  • Zou, Jingye
  • Quintana, Alberto
  • Bachelet, Romain
  • Saint-Girons, Guillaume
  • Silva, José P.B.
  • Sánchez, Florencio
  • Fina, Ignasi
Perovskite relaxor ferroelectrics and antiferroelectrics have been the workhorse materials for energy storage electrostatic devices. Recently, there has been growing interest in ferroelectric HfO2, which is highly compatible with fabrication processes of the electronics industry and scalable down to the ultrathin limit. However, wake-up and fatigue phenomena in ferroelectric HfO2 can limit the stability of energy storage capacity upon cycling. Interface engineering using simple AxOy (Ir, Ce, Ru, Al, La and Zr) binary oxides as capping layers is a promising strategy to mitigate these effects, but previous works have focused on optimizing high remanent polarization for memory applications. In contrast, for energy storage applications, the optimal parameters differ from those required for memory devices. Therefore, alternatives to AxOy capping layers must be investigated. Here, we demonstrate that the integration of the perovskite ferroelectric BaTiO3 with the fluorite ferroelectric Hf0.5Zr0.5O2 yields highly stable energy storage density and enhanced efficiency over cycling and at high temperatures. We study a set of samples combining epitaxial Hf0.5Zr0.5O2 grown on Si(001) with polycrystalline BaTiO3 of various thicknesses. The ferroelectricity of Hf0.5Zr0.5O2 is preserved and the efficiency is enhanced without compromising the high breakdown voltage. The device performance is optimal for a BaTiO3 thickness of 10 nm, exhibiting an energy storage density of 100 J/cm3, efficiency of 80 % and breakdown field of 12 MV/cm. We attribute this remarkable performance to the distinct electrical properties of BaTiO3 compared with previously investigated AxOy capping layers. The investigations are carried out on a system that combines memory and energy storage properties, enabling the design of prospective devices in which energy recovery and memory functionalities are integrated at the chip level.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Ultrathin tungsten films enabling enhanced electrical response to spin currents

  • Morales-Aragonés, José Ignacio
  • Groen, Inge
  • Hueso, Luis E
  • Casanova, Fèlix
  • Pardo, José Ángel
  • Sánchez-Azqueta, Carlos
  • De Teresa, José María
  • Sangiao, Soraya
The efficient detection of spin currents is crucial for the development of next-generation spintronic devices. Here, we demonstrate that ultrathin W layers, with thicknesses down to 2 nm—equivalent to only four atomic planes—allow for highly efficient spin-to-charge conversion. From spin pumping experiments in YIG/W bilayers, we analyzed the inverse spin Hall effect (SHE) voltage dependence on W thickness and extracted a spin Hall conductivity of σSH = −1.14(6) × 105 Ω −1 m−1, yielding effective spin Hall angles ranging from −0.27(4) to −0.88(4) over the investigated thickness range. Furthermore, assuming the Elliott–Yafet spin scattering mechanism dominates, we estimate a spin diffusion length λsd = 4.3(5) × 10−15Ωm2/ρW, where the W resistivity ρW is strongly dependent on thickness. Structural characterization, together with roomtemperature electrical resistivity measurements and the high spin-to-charge conversion efficiency observed, confirms the stabilization of the β-phase in these ultrathin W layers. We demonstrate that the monotonic increase of the inverse SHE voltage with decreasing W thickness persists down to 2-nm-thick W layer, reflecting the extremely short spin diffusion length. This allows for efficient spin-current detection in W layers below 5 nm, effectively doubling the voltage output at half the thickness. In the thinnest sample, a continuous 2-nm-thick W layer, the generated voltage exceeds 0.5 mV—well within the operating range of conventional electronics. These findings demonstrate not only the feasibility of spin-current detection in ultrathin W, but also its compatibility with conventional electronics. They highlight the strong potential of integrating ultrathin W layers with high-quality YIG films for the development of energy-efficient spintronic devices and sensors.