Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 79
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Initial UWB in-body channel characterization using a novel multilayer phantom measurement setup

  • Pérez-Simbor, Sofia
  • Barbi, Martina
  • Garcia-Pardo, Concepcion|||0000-0002-2774-980X
  • Castelló-Palacios, Sergio|||0000-0003-4689-652X
  • Cardona Marcet, Narciso|||0000-0001-5697-1453
[EN] Wireless Body Area Networks (WBANs) are a promising technology for medical purposes. Currently the WBAN are classified into: implanted (in-), surface (on-) or outside (off-) body communications regarding the location of the devices with reference to the human body. The Ultra Wide-Band (UWB) frequency band is growing as a band of interest for implanted communications because of its high data rate and low power consumption among other benefits. Software simulations, in-vivo measurements and experimental phantom measurements are common methods to properly characterize the propagation channel. Nevertheless, up to now, experimental phantoms measurements presented in the literature show some inconveniences, i.e., the accuracy of the phantoms compared with the real human tissues or the testbed used for the measurements. This paper aims at overcoming these issues using accurate phantoms designed for the purpose of implanted communications in the UWB frequency band. In addition, a multilayer phantom container was developed. This container has capacity for two different phantoms, emulating a heterogeneous propagation medium for in-body measurements. Moreover, a novel setup was built for in-body phantom measurements. As a result, an experimental path loss model is presented from the measurements obtained with phantoms. Besides, software simulations mimicking the experimental setup are performed in order to validate the previous results obtained, This work was supported by the European Union's H2020:MSCA:ITN program for the "Wireless In-body Environment Communication-WiBEC" project under the grant agreement no. 675353. this work was also funded by the Programa de Ayudas de Investigación y Desarrollo 8PAID-01-16) from Univeristat Politècnica de València and by the Ministerio de Economía y Competitividad, Spain (TEC2014-60258-C2-1-R), by the European FEDER funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Enhancing Precision Medicine: An Automatic Pipeline Approach for Exploring Genetic Variant-Disease Literature

  • Contreras-Ochando, Lidia
  • Pla Santamaría, Ferran
  • Segarra Soriano, Encarnación
  • Marco-García, Pere|||0009-0003-7026-3543
  • León-Palacio, Ana|||0000-0003-3516-8893
  • Hurtado Oliver, Lluis Felip|||0000-0002-1877-0455
[EN] Advancements in genomics have generated vast amounts of data, requiring efficient methods for exploring the relationships between genetic variants and diseases. This paper presents a pipeline approach that automatically integrates diverse biomedical databases, including NCBI Gene, MeSH, LitVar2, PubTator, and SynVar, for retrieving comprehensive information about genes, variants, diseases, and associated literature. The pipeline consists of multiple stages: querying and searching across the different databases, extracting relevant data, and applying filters to refine the results. Its goal is to bridge the gap in information retrieval related to genetic variants and diseases by providing a systematic framework for discovering relevant literature. The pipeline uses open-access sources to uncover additional articles not referenced in expert reports that mention the genetic variants of interest. In this paper, we present the methodology of the pipeline, discuss its limitations and highlight its potential for advancing information systems, data management, and interoperability in the domains of genomics and precision medicine., This work is partially supported by MCIN/AEI/10.13039/501100011033, by the 'European Union' and 'NextGenerationEU/MRR', and by 'ERDF A way of making Europe' under grants PDC2021-120846-C44 and PID2021-126061OB-C41. It is also partially supported by the Generalitat Valenciana underproject CIPROM/2021/023. We would like to thank the authors of LitVar2 for their valuable assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Gleason Grading of Histology Prostate Images through Semantic Segmentation via Residual U-Net

  • Kalapahar, Amartya
  • Silva-Rodríguez, Julio José
  • Colomer, Adrián|||0000-0002-7616-6029
  • López-Mir, Fernando|||0000-0001-8286-6796
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
[EN] Worldwide, prostate cancer is one of the main cancers affecting men. The final diagnosis of prostate cancer is based on the visual detection of Gleason patterns in prostate biopsy by pathologists. Computer-aided-diagnosis systems allow to delineate and classify the cancerous patterns in the tissue via computer-vision algorithms in order to support the physicians¿ task. The methodological core of this work is a U-Net convolutional neural network for image segmentation modified with residual blocks able to segment cancerous tissue according to the full Gleason system. This model outperforms other well-known architectures, and reaches a pixel-level Cohen¿s quadratic Kappa of 0.52, at the level of previous image-level works in the literature, but providing also a detailed localisation of the patterns., This work was supported by the Spanish Ministry of Economy and Competitiveness through project DPI2016-77869. The work of Fernando Lopez-Mir has been supported by the Polytechnic University of Valencia (Grant PAID-10-18). The Titan V used for this research was donated by the NVIDIA Corporation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Recommending Learning Videos for MOOCs and Flipped Classrooms

  • Jordán, Jaume|||0000-0003-0400-9136
  • Valero Cubas, Soledad|||0000-0003-4565-326X
  • Turró Ribalta, Carlos|||0000-0002-3840-9405
  • Botti V.|||0000-0002-6507-2756
[EN] New teaching approaches are emerging in higher education, such as flipped classrooms. In addition, academic institutions are offering new types of training like Massive Online Open Courses. Both of these new ways of education require high-quality learning objects for their success, with learning videos being the most common to provide theoretical concepts. This paper describes a hybrid learning recommender system based on content-based techniques, which is able to recommend useful videos to learners and teachers from a learning video repository. This hybrid technique has been successfully applied to a real scenario such as the central video repository of the Universitat Politècnica de València., This work was partially supported by MINECO/FEDER RTI2018-095390-B-C31 and TIN2017-89156-R projects of the Spanish government, and PROMETEO/2018/002 project of Generalitat Valenciana. J. Jordán and V. Botti are funded by UPV PAID-06-18 project. J. Jordán is also funded by grant APOSTD/2018/010 of Generalitat Valenciana - Fondo Social Europeo.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Performance y documentación: propuesta de un modelo para la adquisición y conservación de obra performativa

  • Fernández-Valdés, Paula
  • Cuesta, Salomé|||0000-0002-7898-8093
[ES] En un mundo que tiende exponencialmente hacia la transformación digital y la desobjetualización, encontramos que en el ámbito de la cultura se producen cada vez más experiencias en torno a lo virtual, lo intangible y lo inmaterial. Estos fenómenos, activados por la convergencia entre nuevas tecnologías y producción artística, generan complejas obras performativas que afectan a los protocolos propios del campo de la conservación y la restauración. La complejidad de trabajar con estas tipologías es especial, ya que son piezas que se caracterizan por estar basadas en el tiempo, ser efímeras, vivas y dinámicas. ¿Se puede conservar una acción? ¿La audiencia participa en la obra? ¿Necesita ser documentada? A partir del estudio de los protocolos de conservación de los considerados nuevos medios, desarrollaremos un modelo conceptual con el objetivo de abordar la complejidad de las obras performativas y reflexionar sobre posibles modelos para su preservación.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Obtención del Espectro Primario de Rayos X con los Códigos PENELOPE Y MCNPS

  • Pozuelo, Fausto
  • Querol Vives, Andrea
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • Ródenas Diago, José|||0000-0003-3283-9188
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[ES] Conocer el espectro primario de rayos X es muy importante en el Control de Calidad de los tubos de rayos X, ya que permite conocer mejor, y por tanto reducir, la dosis impartida a los pacientes. Sin embargo, obtener el espectro primario resulta complicado para los controles rutinarios, de ahí que se midan los parámetros de calidad del espectro, en lugar de obtener su espectro primario. En este caso, se utilizan los códigos PENELOPE y MCNP5, basados en el método Monte Carlo, para obtener el espectro de rayos X teniendo en cuenta las características del tubo de rayos X. Con el fin de conseguir un mayor ajuste del espectro simulado al teórico, se ha realizado un análisis de sensibilidad de los parámetros disponibles en ambos códigos. La obtención del espectro simulado podría suponer una mejora dentro del control de calidad de los tubos de rayos X al incorporarlo como un método complementario a las técnicas utilizadas. Los espectros simulados se han comparado con sus respectivos teóricos, extraídos del catalogo IPEM-78, mediante el cálculo del error cuadrático mínimo y los parámetros de calidad del espectro como la capa de hemirreducción. Esta comparación permite determinar que la simulación obtenida es aceptable. Del análisis de sensibilidad realizado con el código PENELOPE se ha obtenido que el parámetro FORCE es una de las variables más importantes para conseguir un buen ajuste entre el espectro simulado y el teórico. La elección de su valor debe ser óptima, de modo que se obtenga un buen ajuste al espectro teórico con un tiempo de computación aceptable. Los resultados obtenidos demuestran que para conseguir un mejor ajuste es necesario un valor alto de FORCE, sin embargo esto aumenta el tiempo de computación. Por otra parte, se ha observado que con un valor bajo de este parámetro no se obtienen importantes diferencias en cuanto a la dosis en profundidad y si se consigue disminuir el tiempo de computación., Este trabajo, ha sido parcialmente financiado por la Generalitat Valenciana dentro del proyecto de investigación GVPRE/2008/136, y la Universitat Politècnica de València dentro del proyecto PAID‐06‐07‐3300. Así como por la beca de Formación de Profesorado Universitario (FPU) del Ministerio de Educación y Ciencia, referencia AP2009‐2600.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Modifying Kurchatov&apos, s method to find multiple roots

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Garrido-Saez, Neus|||0000-0002-7903-8591
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Triguero-Navarro, Paula|||0000-0002-7319-9992
Spanish Ministerio de Ciencia, Innovación y Universidades PGC2018-095896-B-C22, by the project ADMIREN of Universidad Internacional de La Rioja and was partially supported by Universitat Politècnica de València PAID-01-20-17 (UPV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Probabilistic analysis of scalar random differential equations with state-dependent impulsive terms via probability density functions

  • Bevia-Escrig, Vicente-José
  • Jornet, M.
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
This work has been partially supported by the Spanish Ministerio de Economia, Industria y Competitividad (MINECO), the Agencia Estatal de Investigacion (AEI) and Fondo Europeo de Desarrollo Regional (FEDER UE) grant PID2020-115270GB-I00, the Generalitat Valenciana (grant AICO/2021/302) and by el Fondo Social Europeo y la Iniciativa de Empleo Juvenil EDGJID/2021/185. Vicente Bevia acknowledges the doctorate scholarship granted by Programa de Ayudas de Investigacion y Desarrollo (PAID), Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

CLARA: Semi-automatic Retraining System

  • Campos-Mocholí, Mario|||0009-0009-4721-2207
  • Chacón-Albero, Oriol de la Pau
  • Julian, Vicente|||0000-0002-2743-6037
  • Botti V.|||0000-0002-6507-2756
  • Marco-Detchart, Cédric
  • Rincón-Arango, Jaime Andrés
[EN] Recent advancements in computer vision have led to humanlevel performance in image recognition tasks, but challenges persist in real-world applications due to differences in data distribution. This paper introduces CLARA, a semi-automatic framework designed to continually retrain computer vision models by incorporating expert annotation of new data. The system was tested in a production environment with a waste image classification model and showed improved performance and robustness against evolving data distributions. This approach encourages collaboration among stakeholders in waste management and utilizes human-in-the-loop strategies to enhance model accuracy. The framework is adaptable to various models and tasks and, additionally, supports fusion techniques that combine outputs from multiple models to improve prediction robustness and overall system reliability., This work was partially supported with grant tPID2021- 123673OB-C31 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe , grant CIPROM/2021/077 from the Conselleria de Innovació, Universitats, Ciencias i Societat Digital GVA - PROMETEO, grant PAID-06-23 by the Vice Rectorate Office for Research from UPV and project Reciclaje Inteligente y Cooperativo en Toda la Cadena de Valor Orientado a Una Sociedad Sostenible 360º (INNEST/2022/180) from AVI.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Real-time functionalization and biosensing in subwavelength grating bimodal waveguides

  • Torrijos-Morán, Luis
  • Martinez-Perez, Paula
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] In this paper, we present for the first time experimental results of biosensing processes by using subwavelength grating bimodal waveguides as a refractive index sensors. We demonstrate the detection of 10ppm concentration of Bovine Serum Albumin (BSA) with a 190pm wavelength shift after a functionalization of the sensor surface with a layer of protein A/G in a continuous flowing system. Real-time data of each step is obtained, validating these kind of novel and highly sensitive SWG sensors for biosensing purposes., The authors acknowledge the funding from the Generalitat Valencia through project AVANTI/2019/123 and grant ACIF/2019/009.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Post-fire Behaviour of Stainless Steel Rebars

  • Hernández-Figueirido, David
  • Piquer, Ana
  • Roig-Flores, Marta
  • Lapuebla-Ferri, Andrés|||0000-0001-9667-236X
  • Albero, V|||0000-0001-7193-9232
  • Pons Aliaga, David|||0000-0002-9034-9550
  • Ibáñez, Carmen|||0000-0002-9354-5637
[EN] Stainless steel rebars (SSR) offer significant advantages for reinforced concrete structures, especially in environments where corrosion is a major concern. Also, SSR exhibit excellent mechanical strength, high ductility, and reliable performance at elevated temperatures. However, SSR are less commonly used than carbon steel rebars (CSR) mainly due to their higher cost. This cost factor likely contributes to the limited research on the mechanical properties of SSR after exposure to high temperatures. In the present study, an experimental campaign was conducted on duplex SSR of various grades and production routes (hot-rolled and cold-formed) to evaluate their response following exposure to elevated temperatures. Specimens were heated to temperatures up to 1000 ºC and posteriorly cooled in air to room temperature. Afterwards, specimens underwent tensile testing to obtain the residual mechanical properties, including yield strength, ultimate strength, Young¿s modulus, ultimate strain and strain at fracture. The residual values were compared with results obtained in similar tests conducted on CSR. Findings indicate that SSR, after cooling down, fully recover their yield and ultimate strengths and exhibit a greater residual ductility compared to CSR, even in cold-formed specimens., The authors gratefully acknowledge Universitat Politècnica de València for the help provided through the Project STAINPOST (financial grant for first research projects, reference PAID-06-23) and the company ACERINOX for providing the test specimens.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Experimental characterization of the refrigerant distribution along a finned tubes heat exchanger

  • Sánchez-Moreno-Giner, Luis
  • López-Juárez, Emilio
  • López-Navarro, Alejandro|||0000-0002-0286-7965
  • Gonzálvez-Maciá, José|||0000-0001-9422-7756
[EN] According to the European Commission, heating, cooling and domestic hot water (DHW) production imply 79% of the total energy consumed in households. Moreover, as 84% of this energy is still generated from fossil fuels, it is required taking measures in order to improve the current situation. Following this intention, the path of the European Union is the reduction of the energy consumption and increasing the percentage of energy produced by renewable sources. One way to achieve the objectives set by the European Union is by the use of the heat pump powered by renewable sources, while the directive 2009/28/CE consider that heat pumps use renewable sources under certain conditions. Nowadays, refrigerants used by heat pumps are mainly hydrofluorocarbons (HFCs) which have a high global warming potential (GWP) and have a clear deadline defined at F-Gas EU Regulation 517/2014. For this reason, natural refrigerants, will play an important role within heating, cooling and DHW production at household sector. However, most of the natural refrigerants with acceptable thermodynamic properties are at least slightly flammable, and this attempt against the safety. For this reason, the amount of refrigerant charge must satisfy the maximum refrigerant charge limited by regulations, and the prediction of this maximum charge has become an important matter within the design process of a heat pump. Nevertheless, calculating the amount of refrigerant for a given heat pump is a difficult process with many uncertainties, like refrigerant mal-distribution in heat exchangers. In this work, an experimental characterization of the amount of refrigerant along the finned tubes heat exchanger (FTHE) of a heat pump working with R290 has been done. This qualitative and quantitative study has been carried out by measuring and comparing the temporary temperatures pattern distribution of the refrigerant in the FTHE, using thermocouples and thermographies, Luis Sánchez-Moreno-Giner acknowledges the Research and Development Aid Program (PAID01-17) of the Universitat Politècnica de València for receiving the Research Fellowship FPIUPV-2017.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Comparative study of the performance of a heat pump for heating with R410A and R32 as refrigerant, using the software IMST-ART

  • Sánchez-Moreno-Giner, Luis
  • López-Juárez, Emilio
  • Gonzálvez-Maciá, José|||0000-0001-9422-7756
[EN] According to the European Commission, at this moment, heating and cooling in buildings account for half of the energy consumption, while only a 16% of the energy used in this issue is obtained employing renewable sources. One of the possible solutions to improve the current situation is the use of heat pumps for the air conditioning of buildings. However, the refrigerants used at this moment are hydrofluorocarbons (HFCs) and they have a global warming potential (GWP) elevated so that new refrigerants which can substitute the current ones are being searched. The most used refrigerant for heating applications is the R410A, which is a mixture of HFCs. Its immediate retrofit is one of its components, the R32, due to the compatibility of both refrigerants with the materials and its similar performance. Furthermore, the R32 has a value of GWP approximately of a third of the R410 s value. The objective of this work is to evaluate the main differences between the results obtained with both refrigerants and to find out the main changes to be done to obtain at least the same performance. In this work, a model of IMST-ART of an air-water heat pump is presented using both refrigerants. In the model, both refrigerants are evaluated for different conditions of heating at low temperature. Lately, a summary of changes is proposed in order to cover the same functions, or more, than the original heat pump., Luis Sánchez-Moreno-Giner acknowledges the Research and Development Aid Program (PAID01-17) of the Universitat Politècnica de València for receiving the Research Fellowship FPIUPV-2017.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Characterizing the driving style behavior using artificial intelligence techniques

  • Meseguer Anastasio, Javier Enrique
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] The On Board Diagnosis (OBD-II) standard allows accessing the vehicles’ Electronic Control Unit (ECU) easily through a Bluetooth OBD-II connector. This paper presents the DrivingStyles architecture, which adopts data mining techniques and neural networks to analyze and generate a classification of driving styles by analysing the characteristics of the driver along the route followed. The final goal is to assist drivers at correcting the bad habits in their driving behavior, while offering helpful tips to improve fuel economy. Since it is well known that smart driving can lead to a lower fuel consumption, the environmental impact is also reduced. A study involving more than 180 users is being carried out, where their real time traces (with different traffic conditions) is sent periodically to the platform. DrivingStyles is currently available on the Google Play Store platform for free download, and has achieved more than 2800 downloads from different countries in just a few months, This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01, and by the Universitat Politècnica de València through the ABATIS project (PAID-05-12).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Word Discovering in Low-Resources Languages Through Cross-Lingual Phonemes

  • García-Granada, Fernando|||0000-0003-2213-4213
  • Sanchís Arnal, Emilio|||0000-0002-6737-4723
  • Castro-Bleda, Maria Jose|||0000-0003-1001-8258
  • Hurtado Oliver, Lluis Felip|||0000-0002-1877-0455
  • González-Barba, José Ángel
An approach for discovering word units in an unknown language under zero resources conditions is presented in this paper. The method is based only on acoustic similarity, combining a cross-lingual phoneme recognition, followed by an identification of consistent strings of phonemes. To this end, a 2-phases algorithm is proposed. The first phase consists of an acoustic-phonetic decoding process, considering a universal set of phonemes, not related with the target language. The goal is to reduce the search space of similar segments of speech, avoiding the quadratic search space if all-to-all speech files are compared. In the second phase, a further refinement of the founded segments is done by means of different approaches based on Dynamic TimeWarping. In order to include more hypotheses than only those that correspond to perfect matching in terms of phonemes, an edit distance is calculated for the purpose to also incorporate hypotheses under a given threshold. Three frame representations are studied: raw acoustic features, autoencoders and phoneme posteriorgrams. This approach has been evaluated on the corpus used in Zero resources speech challenge 2017., This work was funded by the Spanish MINECO and FEDER founds under contract TIN2017-85854-C4-2-R. Work of Jos¿e-Angel Gonzalez is also financed by Universitat Polit`ecnica de Val`encia under grant PAID-01-17
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

The MLLP-UPV Supervised Machine Translation Systems for WMT19 News Translation Task

  • Iranzo-Sánchez, Javier
  • Garcés Díaz-Munío, Gonçal|||0000-0002-2594-5858
  • Civera Saiz, Jorge|||0000-0002-0963-0143
  • Juan, Alfons|||0000-0002-9984-4072
[EN] This paper describes the participation of the MLLP research group of the Universitat Politècnica de València in the WMT 2019 News Translation Shared Task. In this edition, we have submitted systems for the German ¿ English and German ¿ French language pairs, participating in both directions of each pair. Our submitted systems, based on the Transformer architecture, make ample use of data filtering, synthetic data and domain adaptation through fine-tuning., The research leading to these results has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement no. 761758 (X5gon); the Government of Spain¿s research project Multisub, ref. RTI2018-094879-B-I00 (MCIU/AEI/FEDER, EU); and the Universitat Politecnica de València's PAID-01-17 R&D support programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Using Diffusion Models for Data Augmentation on Limited Rodent OCT Datasets

  • García-Torres, Fernando|||0000-0002-5337-8774
  • del Amor, Rocío
  • Morales, Sandra|||0000-0003-0763-1545
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
  • Barroso, Álvaro
  • Kemper, Björn
  • Schnekenburger, Jürgen
[EN] Optical coherence tomography (OCT) has transformed ophthalmology by enabling accurate diagnosis of retinal diseases. OCT in rodents is used in research studies of ophthalmic diseases and treatment evaluation. However, the scarcity of data limits the effectiveness of deep learning models for this purpose. This study explores the use of synthetic data generation to improve deep learning models for OCT image analysis from rodent retinas. To address this, the research leverages advanced class-conditional generative models to create high-quality synthetic images of ex-vivo rodent retinas embedded in two different mediums (solid resin and liquid media) with a reduced initial database. The conditional Denoising Diffusion Probabilistic Model (DDPM) proved to be the best model, as it produces more realistic images that closely mimic the characteristics of real rodent retinal scans. By augmenting the training datasets with these synthetic images, the performance of deep learning models in segmenting retinal layers improved by 7%. This approach reduces reliance on scarce biological samples and animal testing, promoting ethical research practices while improving the accuracy and efficiency of AI-driven medical diagnostics. The integration of synthetic data generation represents a significant advance in medical imaging, offering a scalable solution to data scarcity, generating reliable samples in two mediums and promoting the development of more robust and accurate diagnostic tools., This work has received funding from Horizon Europe, the European Union s Framework Programme for Research and Innovation, under Grant Agreement No. 101070062 (SEQUOIA). Generalitat Valenciana partially funded this work through project CIPROM/2022/20. The work of Sandra Morales has been cofunded by the Universitat Polit`ecnica de Val`encia, Spain through the program PAID10-20. The work of Rocio del Amor has been supported by the Spanish Ministry of Universities under an FPU Grant (FPU20/05263).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Diseño y uso de redes neuronales para estimar las prestaciones en solitario de las aplicaciones

  • Lurbe, Manel
  • Feliu-Pérez, Josué|||0000-0003-3017-4266
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[ES] Cuando varias aplicaciones se ejecutan concurrentemente en un computador con recursos compartidos, como las caches de último nivel o la memoria principal, se producen pérdidas de prestaciones por la interferencia entre aplicaciones en el uso de estos recursos respecto a su ejecución en solitario. Para reducir estas pérdidas, se han diseñado políticas para gestionar estos recursos (por ej., políticas de reparticionando del espacio de cache o de configuración de la prebúsqueda hardware). Un importante desafío en diferentes ámbitos, como la nube o los sistemas de tiempo real, es predecir cómo la acción de una determinada política afectaría a las prestaciones de cada aplicaciones antes de realizarla. Este trabajo presenta una propuesta basada en redes neuronales que, a partir de datos obtenidos por una aplicación en ejecución concurrente con otras aplicaciones, estima las prestaciones que tendría una aplicación en solitario. Los resultados experimentales muestran que la propuesta se adapta dinámicamente a los cambios en el comportamiento de las aplicaciones de la carga. Las prestaciones estimadas presentan, de media, un error del 11,7% y del 2,3% para las métricas MAPE y MSE, respectivamente., Trabajo financiado por el Ministerio de Ciencia, Innovaciçon y Universidades y ERDF bajo la ayuda RTI2018-098156-B-C51, por la GVA AICO/2021/266, por la UPV PAID-01-20. Josué Feliu con apoyo de un contrato de formación Juan de la Cierva (FJC2018-036021-I)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Identification of the system character through accumulated charge curve

  • Martínez-Ibernón, Ana|||0000-0003-2136-5650
  • Ramón Zamora, José Enrique
  • Bataller, Román
  • Soto Camino, Juan
[EN] The corrosion rate in metals is usually studied by means of the application a potential signal with the purpose of leading the system to unbalance conditions, due to an electric current response is produced. This response is recorded and processed through the electric circuit analogy. Doing the fitting of the response to the properly model is getting the corrosion current. The application of voltammetric potential pattern to the analysis of corrosion, it is very useful, because does not produce polarization of the system. There fore, with this technique is possible to perform tests in sequence without the results being affected. Furthermore, through the integration over time of the electric current response, the accumulated electric charge curve is got which is very useful to the quickly identification of the system behaviour (faradic or non-faradic behaviour). In this paper, it is showed the capability of characterization a system through the accumulated electric charge; it allows identifying at a glance if the system has a faradic behaviour or a non-faradic behaviour. This will be very effective in the monitoring of the metal elements that are out of sight, such as: buried metal conduits or the reinforcement bars in the reinforcement concrete structures., The authors would like to express their gratitude to the Spanish Ministry of Science and Innovation for the pre-doctoral scholarship granted to Ana Martínez Ibernón (FPU 16/00723). To the Universitat Politècnica de València for the financial support in the project Ayudas a Primeros Proyectos de Investigación (PAID-06-18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Large-Scale Tests on RC Purpose-Built Buildings for Improving Robustness

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Adam, Jose M|||0000-0002-9205-8458
  • Mezquida-Alcaraz, Eduardo J.
[EN] Although recent years have been marked by a substantial research effort on the progressive collapse of steel as well as cast-in-place and precast concrete structures, the fact is that almost all studies are focused on reduced-scale tests, tests on isolated frame structures, tests on substructures or analytical and numerical analysis. Within this context, large-scale tests avoid size effects and allow all resisting mechanisms that a structure can develop after an initial-local failure to be studied. This paper presents the case of large-scale tests performed on two purpose-built buildings: one made of cast-in-place concrete and the other with precast concrete elements. In both cases, sudden column removal scenarios were considered for the robustness assessment of the structural system. The structures were provided with simple solutions to enhance the robustness and arrest progressive collapse initiated by the sudden failure of a column. The cast-in-place concrete building had two 3 m high floors, with 2 × 2 bays of 5 m span length. The total in-plan dimensions of the building were 10 × 10 m2. This building was subjected to sudden corner column failure scenarios with and without the presence of infill masonry walls. The precast concrete structure also had two 3 m high floors, with 3 × 2 bays of 5 m and 6 m span, respectively. The total in-plan dimensions of the building were 15 × 12 m2. This building was subjected to sudden column failure scenarios for three different tests, involving the removal of: a corner column, an edge column in a frame parallel to the direction of one-way hollow-core slabs, and an edge column in a frame perpendicular to the one-way slabs. This paper presents and discusses a summary of the results and outcomes of these studies., The work for the cast-in-place concrete building was carried out with the support of a 2017 Leonardo Grant for Researchers and Cultural Creators from the BBVA Foundation. The work for the precast concrete building was carried out with the funding received through grant BIA2017-88322-R-AR funded by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe. This research also serves as the basis of a project (Endure) that has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (Grant Agreement No. 101000396). The authors would also like to express their gratitude to the Levantina, Ingeniería y Construcción S.L. (LIC) company for funding the construction of the building, and to the Generalitat Valenciana/Fons Social Europeu [APOSTD/2019/101], grant IJC2020-042642-I funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGeneration EU/PRTR, and Universitat Politècnica de València [PAID-10-17] for funding received under different postdoctoral programs.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

1D Periodic Corrugated Waveguides for Real-Time Detection of Increasing Concentrations of Thrombin

  • Martinez-Perez, Paula
  • Torrijos-Morán, Luis
  • Gómez-Gómez, María Isabel|||0000-0001-7548-209X
  • Ivanova-Angelova, Todora|||0000-0002-8150-4133
  • Griol Barres, Amadeu
  • Hurtado Montañés, Juan|||0000-0002-4870-7641
  • Bellieres, Laurent Christophe
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] An aptasensor based on periodic 1D corrugated waveguides is demonstrated to be suitable for the specific and continuous detection of thrombin at nM concentrations in real time with an estimated detection limit of 33.5 pM., This research was supported by a co-financed action by the European Union through the operational program of the European Regional Development Fund (FEDER) of the Valencian Community 2014-2020, the Generalitat Valenciana through the PROMETEO project AVANTI/2019/123 and the grant ACIF/2019/009, and by Universitat Politècnica de València through grants PAID-01-17 and the project OCUSENSOR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Towards a Low-Rank Approach to Compress Deep Neural Networks

  • Liern-Garcia, Marina
  • López-García, Aaron
  • Marco-Detchart, Cédric
  • Carrascosa Casamayor, Carlos|||0000-0003-3649-6530
[EN] In this work, we introduce a low-rank approach based on the truncated Singular Value Decomposition (SVD) technique to make deep neural networks (DNNs) smaller. Our method focuses on reducing the overall physical size of a neural network model without losing much in terms of its accuracy or increasing its error noticeably. Specifically, we applied our technique to a modified MobileNetV2 model, in the context of automatic plant diseases detection. We chose two of the biggest layers of the model and compressed them. Our goal was to see how this compression affects the breakdown of the layers, the error in rebuilding the layers, and how well the modified model performs. The results showed that the smaller model still predicts very accurately, even with the reduced physical size of its layers. By making these layers smaller, our approach offers a practical way to handle the deployment of large neural networks, especially in devices with limited resources, without compromising their effectiveness., This work was partially supported with grants TED2021-131295B-C32, PID2021-123673OB-C31 funded by MCIN/AEI/ 10.13039/ 501100011033 and by ERDF A way of making Europe , PROMETEO grant CIPROM/2021/077 from the Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital - Generalitat Valenciana, Early Research Project grant PAID-06-23 by the Vice Rectorate Office for Research from Universitat Politècnica de València (UPV)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Analysis of fire behavior in semi-real forest scenarios by integrating tls data into physical simulation models

  • Simo-Marti, Marina|||0000-0001-9605-9645
  • Crespo-Peremarch, Pablo|||0000-0003-2241-4493
  • Torralba, Jesús|||0000-0001-8644-8604
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
[EN] In view of the increasing intensity and frequency of large forest fires, the study and simulation of fire behavior in Mediterranean forests appears as a crucial task to define prevention and extinction strategies. The physical model Fire Dynamics Simulator (FDS) allows the analysis of fire behavior in 3D scenarios at high levels of resolution by introducing LiDAR point clouds to describe the structure and characteristics of the vegetation. The main objective of this paper is the analysis of fire behavior in Mediterranean forest semi-real scenarios, by modifying structural properties of the forest related to the horizontal and vertical continuity of the vegetation. To achieve this goal, a methodology has been developed to generate scenarios from real segmented and voxelized individuals of Mediterranean shrubland and tree species. These models were obtained from TLS (Terrestrial Laser Scanning) in plots located in La Serra d'Espadà. The methodology considers the distribution of biomass at individual and voxel level, taking into account a heterogeneous distribution of the bulk density of forest fuel, estimated based on the proportion of returns from the point cloud. Finally, for the analysis of the results, the evolution graphs of the following model output variables have been studied: the rate of spread, the heat release rate, the mass loss rate and the percentage of biomass consumed. Preliminary findings indicate that horizontal continuity of vegetation is the main driver for the development of steady and sustained fires. , This work was supported by (i) PID2020-117808RBC21/AEI/10.13039/50110001103 and FSE+ “Invierte en tu Futuro” under Grant PRE2021-099526; and (ii) “Programa de Contratos de Acceso de Personal Investigador Doctor” (PAID-10-22) from “Vicerrectorado de Investigación de la Universitat Politècnica de València”.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Introduction of a practical lesson for the evaluation of bioactive quality in plant materials addressed to students in Plant Breeding

  • Guijarro-Real, Carla
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • Gramazio, Pietro|||0000-0003-2226-7999
  • Adalid-Martinez, Ana Maria|||0000-0002-3927-1348
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Rodríguez Burruezo, Adrián|||0000-0002-4530-8071
  • Fita, Ana|||0000-0002-8637-5852
[EN] According to the new market trends, one of the goals in many modern breeding programmes is the development of varieties with enhanced bioactive properties. Despite the importance of evaluating the content of specific molecules, the analysis of the broad antioxidant capacity is often suitable. For instance, if the goal is to evaluate large quantity of materials, or even to compare different agronomical practices to obtain the highest antioxidant properties. Thus, studies related to plant breeding should include subjects related to the knowledge of analytical methods for the evaluation of the bioactive properties in the materials tested. Theoretical lessons establish the basis for understanding the importance of bioactive properties and the influence of stresses in their content. Nevertheless, practical sessions complement this knowledge and improve the competence of future professionals, providing them a tool for the evaluation of bioactive quality in developing breeding materials. We consider therefore that this competence should be acquired during the Master degree in Plant Breeding offered by our institute. Thus, we propose to introduce a practical lesson in the mandatory subject "Instrumental Techniques" aimed to the comparison of two analytical methods for the analysis of bioactive properties. As plant material, we will use water celery, an herbaceous species with great antioxidant properties. The methodology will include the analysis of the antioxidant activity with the DPPH method and the content in total phenolics, both spectrophotometric methods but measuring different aspects of the bioactive quality. The lesson is divided in three sessions of three hours each, in the course of which students will perform all steps for these analyses, including sample preparation, extraction of bioactive molecules, preparation of the calibration curve, and analysis of results. This practical lesson provides students with the competence to evaluate the antioxidant activity of high number of materials using quick and simple spectrophotometric methodologies, and to deal with real problems such as the need of dilution for samples with very high content of bioactive molecules. Moreover, the practical lesson provides the guidelines to adapt the protocols for different materials and consequently to many breeding programmes, and can be also adapted for food technology students., Carla Guijarro-Real is grateful to the Ministerio de Educación, Cultura y Deporte of Spain (MECD) for a predoctoral FPU grant (FPU14-06798). Mariola Plazas is grateful to Generalitat Valenciana and Fondo Social Europeo for a post-doctoral grant (APOSTD/2018/014). Pietro Gramazio is grateful to Universitat Politècnica de València for a post-doctoral contract (PAID-10-18) within the Programa de Ayudas de Investigación y Desarrollo initiative. Ana M Adalid-Martínez is grateful to the Ministerio de Ciencia, Innovación y Universidad of Spain for its support with a post-doctoral contract (PTA2015- 11502-I) within the Subprograma Personal Técnico de Apoyo initiative.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Conflict and Transformation: Historic Perspectives of Architectural Heritage in Achuar Communities (Ecuador)

  • Morocho-Jaramillo, David Eduardo|||0000-0002-5974-937X
  • Mileto, Camilla|||0000-0002-6987-8802
  • Sandoval-Gómez, Francisco
[EN] This article analyses the architectural elements and constructive techniques of the vernacular architecture of the Achuar people, focusing on the physical components of dwellings in response to social and cultural dynamics. A methodological approach based on source triangulation has enabled the comparison of 16th-century cartographic representations, 20th-century ethnographic records, and modern-day observations to evaluate the evolution and survival of tangible spatial and morphological representations characteristic of the Amazonia. The study covers topics ranging from the way in which these structures were documented and represented in early encounters with the Europeans and the Tupinambás, who created new forms of spatial negotiation, to the identification of the main architectural components which have survived, considering both their material dimension and cultural value. This article has contributed to a deeper understanding of architecture as an expression of different ways of life in constant transformation, highlighting the ontological differences between European territorial design and the original peoples., This research was funded by the Universitat Politècnica de València under grant FPI-UPV (PAID-01-21), and is part of the research project “RE-HABITAT—Restauración y rehabilitación sostenible de viviendas tradicionales en contextos históricos” funded by the R&D&i programme of the Department for Innovation, Universities, Science and Digital Society of the Generalitat Valenciana (CIAICO/2022/035).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Propiedades acústicas de láminas multicapa a partir de residuos de neumático

  • Segura Alcaraz, Jorge Gabriel|||0000-0001-8296-3609
  • Crespo, J.E|||0000-0003-1372-4289
  • Juliá Sanchis, Ernesto|||0000-0003-2940-3906
  • Gadea Borrell, José María|||0000-0003-0740-8781
  • Nadal Gisbert, Antonio Vicente
  • Delgado, A.
[ES] En este trabajo se realiza un estudio de la absorción acústica de paneles multicapa conformados a partir de materiales provenientes de neumáticos reciclados (GTR´s), tratando de dar una repuesta al problema medioambiental generado por estos residuos. El artículo se enmarca como un primer paso para la evaluación de la absorción acústica de estos nuevos paneles multicapa para su aplicación como barreras acústicas, insonorización de maquinaria y equipos industriales, acondicionamiento acústico de recintos, etc. Se han preparado dos tipos básicos de paneles multicapa con 10 y 20 mm de espesor. Cada panel multicapa está constituido por tres capas de diferentes espesores siempre con la disposición fibra-caucho-fibra. Para determinar el coeficiente de absorción se ha utilizado el método del tubo de impedancia acústica. Para el caucho se ha trabajado con granulometrías de entre 0,7 y 2,2-4 mm. Los resultados demuestran que los paneles multicapa con caucho de granulometría 2,2-4 mm presentan una mayor absorción acústica dentro del rango de frecuencia estudiado (400-3500 Hz)., Este trabajo forma parte del Proyecto de Investigación PAID-06-11, dentro del plan de I+D+i financiado por la Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Experiencing Augmented Reality as an Accessibility Resource in the UNESCO Heritage Site called &quot, La Lonja&quot, , Valencia

  • Puyuelo, Marina|||0000-0002-5268-4171
  • Merino Sanjuán, Lola|||0000-0001-8741-5628
  • Contero, Manuel|||0000-0002-6081-9988
  • Higón Calvet, José Luís
This paper presents the design of an augmented reality application for the Gothic Silk Market Building called the "Lonja de la Seda" in Valencia (UNESCO Monument Heritage Site, 1996) and the results of the experiments carried out "in-situ" to observe its usability as an accessibility resource. The objective of this project has been to use and validate augmented reality (AR) as a tool to increase the accessibility to the architectural elements of this monumental setting. The AR application aims to resolve the perception issues derived from poor lighting, the distance in relation to the multiple details, access, etc. 145 individuals of different ages and diverse origin, making the visit to the monument with or without guide used the AR application. When visitors had used the application as they wished, interviews were conducted individually in order to receive their feedback about the AR experience. Users enjoyed identifying and selecting the motifs they were going to visualize with the AR tool. In general, the experience was very positively evaluated by participants, promoting a favourable and renewed image of the monument., This project has been carried out in collaboration between the Department of Architectural Graphic Expresion and Labhuman Institute at the Universitat Politècnica de València funded by the Research Program PAID0511 "Nuevas Aplicaciones de las Tecnologías Gráficas para la Mejora de la Sostenibilidad, el Conocimiento y la Accesibilidad al Patrimonio” (Ref. 2786). Besides, the Spanish Ministry Economy and Competitiveness partially supported this work (Project ref. TIN2010-21296-C02-01). It is also necessary to be grateful to the Town Hall of Valencia which has allowed us to carry out the experience in this protected building.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Localization for capsule endoscopy at UWB frequencies using an experimental multilayer phantom

  • Barbi, Martina
  • Pérez Simbor, Sofía
  • Andreu Estellés, Carlos
  • Garcia-Pardo, Concepcion|||0000-0002-2774-980X
  • Cardona Marcet, Narciso|||0000-0001-5697-1453
[EN] Localization inside the human body using ultrawideband (UWB) wireless technology is gaining importance in several medical applications such as capsule endoscopy. Performance analysis of RF based localization techniques are mainly conducted through simulations using numerical human models or through experimental measurements using homogeneous phantoms. One of the most common implemented RF localization approaches uses the received signal strength (RSS). However, to the best of our knowledge, no experimental measurements employing multilayer phantoms are currently available in literature. This paper investigates the performance of RSS-based technique for two-dimensional (2D) localization by employing a two-layer experimental phantom-based setup. Preliminary results on the estimation of the in-body antenna coordinates show that RSS-based method can achieve a location accuracy on average of 0.5-1 cm within a certain range of distances between in-body and on-body antenna., This work was supported by the European Union’s H2020:MSCA:ITN program for the ”Wireless In-body Environment Communication- WiBEC” project under the grant agreement no. 675353. This work was also funded by the Programa de Ayudas de Investigación y Desarrollo (PAID-01-16) from Universitat Politècnica de València and by the Ministerio de Economía y Competitividad, Spain (TEC2014-60258-C2-1-R), by the European FEDER funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Surrogate Fuel Formulation to Improve the Dual-Mode Dual-Fuel Combustion Operation at Different Operating Conditions

  • Benajes, Jesús|||0000-0002-1653-9188
  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Lago-Sari, Rafael
[EN] Dual-mode dual-fuel combustion is a promising combustion concept to achieve the required emissions and CO2 reductions imposed by the next standards. Nonetheless, the fuel formulation requirements are stricter than for the single-fuel combustion concepts as the combustion concept relies on the reactivity of two different fuels. This work investigates the effect of the low reactivity fuel sensitivity (S=RON-MON) and the octane number at different operating conditions representative of the different combustion regimes found during the dual-mode dual-fuel operation. For this purpose, experimental tests were performed using a PRF 95 with three different sensitivities (S0, S5 and S10) at operating conditions of 25% load/950 rpm, 50%/1800 rpm and 100%/2200 rpm. Moreover, air sweeps varying ±10% around a reference air mass were performed at 25%/1800 rpm and 50%/1800 rpm. Conventional diesel fuel was used as high reactivity fuel in all the cases. Moreover, commercial 95 RON gasoline was used as reference to compare the different TRFs. The engine settings were managed to adjust the rate of heat release to that found with 95 RON gasoline. To do this, a quality index imposing a maximum deviation of 5% point-to-point between the HRR curves from both fuels was defined. The results suggest that PRF 95 with S0 has the most similar behavior compared to conventional 95 RON gasoline whatever the engine load. As the engine load increases, the sensitivity effect is more noticeable and iso-HRR operation was only possible for S0. At low and medium load, the TRFs present similar engine-out emissions with equal fuel consumption. At full load, the NOx emissions are increased with respect to the reference 95 RON gasoline without fuel consumption benefits. The results from the air variation for the different octane numbers demonstrated that the greatest differences are obtained for low air mass (i.e, higher EGR). In addition, the decrease of the octane number limits the maximum air increase due to the pressure gradients, requiring modifications in the engine settings that increase the soot formation., The authors thanks VOLVO Group Trucks Technology and ARAMCO Overseas Company for supporting this research. The authors also acknowledge FEDER and Spanish Ministerio de Economía y Competitividad for partially supporting this research through TRANCO project (TRA2017-87694-R) and the Universitat Politècnica de València for partially supporting this research through Convocatoria de ayudas a Primeros Proyectos de Investigación (PAID-06-18). The author R. Sari acknowledges the financial support from the Spanish ministry of science innovation and universities under the grant ¿Ayudas para contratos predoctorales para la formación de doctores¿ (PRE2018-085043).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Influence of voluntary contractions on the basal sEMG activity of the pelvic floor muscles

  • Albaladejo-Belmonte, Monica
  • Tarazona-Motes, Marta
  • Nohales-Alfonso, Francisco J.
  • Alberola-Rubio, Jose
  • Garcia-Casado, Javier|||0000-0003-1410-2721
[EN] Chronic pelvic pain (CPP) is a complex clinical condition that affects many women, being sometimes misdiagnosed or mistreated,which can be treated with the infiltration of botulinum toxin (BoNTA). The pelvic floor musculature (PFM) condition from CPP patients can be assessed by means of surface electromyography (sEMG). The evaluation of the basal activity can help to detect a muscular dysfunction, therefore it is important to ensure that the PFM shows a minimum activation when its sEMG is being analysed. In this study, we recorded the sEMG of 25 women with CPP before and 8, 12 and 24 weeks after their treatment with BoNTA while they performed a protocol of 5 voluntary contractions. The root mean square (RMS) and sample entropy (SampEn) of basal segments pre- (B[PRE]), inter- (B[I]) and post- (B[POST]) contractions of the sEMG were computed and normalized according to the minimum (RMSnorm) and maximum (SampEnorm) of the recording. B(PRE) showed the lowest RMSnorm median both before and after the treatment with BoNTA, which proved that the activity of the PFM is minimum before the first contraction. As for SampEnnorm, although results were not so conclusive, they also indicated that B(PRE) should be taken as a reference to analyse the PFM function at its state of minimum activity. Future works aiming to characterize the effects of BoNTA in PFM by means of sEMG should consider basal segments before contractions to assess basal tone conditions., This study was funded by ISCIII, MCIU, VLC Campus in Convocatoria Ayudas: UPV-La Fe (INBIO): 2016 SPEHG (ID:C18), 2019 sEMG_BONTAv (ID:C06) and with funds from private contracts with Merz Pharma España S.L.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Introduction and development of a practical lesson for improving the competence of Master students in Plant Breeding: The usefulness of specific software in phenotyping tasks

  • Guijarro-Real, Carla
  • Gramazio, Pietro|||0000-0003-2226-7999
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • Adalid-Martinez, Ana Maria|||0000-0002-3927-1348
  • Rodríguez Burruezo, Adrián|||0000-0002-4530-8071
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Fita, Ana|||0000-0002-8637-5852
[EN] An essential step in many plant breeding programmes is the morphoagronomic phenotyping of the materials that are being developed, using standardized descriptors or, when not available, as it is the case of new crops, consensus guidelines to characterize them. Although many of the traits must be evaluated in the field, those related to the shape and size of leaves and fruits can be easily measured with specific software using digital pictures. This tool provides several advantages, including: 1) more accurate and objective measurements; 2) the possibility of measuring other traits of interest such as area or perimeter, that in other case would not be easily evaluated; or even 3) the possibility of delaying the analysis of pictures in order to focus on field traits. Therefore, the knowledge and management of this tool can become of high usefulness. The Plant Breeding Master offered by our institute is aimed at training professionals able to improve crops and develop new ones according to market trends, in addition to improve adaptation and resistance to biotic and abiotic stresses. Due to the importance of phenotyping considering any of the above breeding goals, in this paper we propose the introduction of a practical session in the mandatory subject "Instrumental Techniques": the management and comparison of adequacy of two specific software tools considering the material to be analyzed. As material, we propose a collection of pepper varieties for analysis of fruits, and a collection of rocket (Eruca and Diplotaxis spp.) germplasm for analysis of leaves, due to the broad variability observed in those materials. The MorphoLeaf v1.0 software will be used for the analysis of leaves, and the Tomato Analyzer 3.0 software will be used for the analysis of fruits and also for leaves. According to the design of the practical lesson, only one session of three hours is required, in which students will learn to properly digitalize materials considering the restrictions of each software and material used, and to obtain all the information needed in each case. In addition, there will be one hour of autonomous work in which both tools and the results obtained will be compared by the students, and a report will be prepared. This practical lesson allows students to acquire the competence for the correct use of different computer tools in the phenotyping task. The comparison of analyses using different scan adjustments and software will allow students to understand the disadvantages of each option and problems that could occur, in order to minimize them. In summary, this practical lesson gives a tool for improving the future phenotyping works of students during their careers, teaching them to consider the best software prior to analysis in order to improve the digitalizing step according to software restrictions, and to obtain more accurate information with a reduction of working time, thus increasing efficiency., Carla Guijarro-Real is grateful to the Ministerio de Educación, Cultura y Deporte of Spain for a predoctoral FPU grant (FPU14-06798). Pietro Gramazio is grateful to Universitat Politècnica de València for a post-doctoral contract (PAID-10-18) within the Programa de Ayudas de Investigación y Desarrollo initiative. Mariola Plazas is grateful to Generalitat Valenciana and Fondo Social Europeo for a post-doctoral grant (APOSTD/2018/014). Ana M Adalid-Martínez is grateful to the Ministerio de Ciencia, Innovación y Universidad of Spain for its support with a post-doctoral contract (PTA2015- 11502-I) within the Subprograma Personal Técnico de Apoyo initiative.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

High performance photonic biosensors based on periodic configurations

  • García-Rupérez, Jaime|||0000-0002-2036-0084
  • Gómez-Gómez, María Isabel|||0000-0001-7548-209X
  • Ponce-Alcántara, Salvador|||0000-0002-7479-8129
  • Torrijos-Morán, Luis
  • Martinez-Perez, Paula
[EN] Periodic photonic configurations as photonic crystals (PhCs) and subwavelength grating (SWG) waveguides are gaining a renewed interest for the development of biosensing structures. By performing a proper design, these periodic configurations allow a significant sensitivity increase while keeping a compact footprint, what is achieved by exploiting concepts such as the slow-wave effect, the increase of the light-matter overlap or the interference of dispersion engineered modes., These results were achieved thanks to the funding received from the European Union (ICT-644242-SAPHELY, PHC634013-PHOCNOSIS and the operational program of the European Regional Development Fund (FEDER) of the Valencia Regional Government 2014¿2020), the Spanish Government (TEC2015-63838-C3-1-R-OPTONANOSENS and PID2019-106965RB-C21-PHOLOW), the Generalitat Valenciana (AVANTI/2019/123, ACIF/2019/009 and PPC/2020/037), the Universitat Politècnica de València (PAID-01-17, PAID-01-18 and OCUSENSOR).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

L1-Bandwidth Aware Thread Allocation in Multicore SMT Processors

  • Feliu-Pérez, Josué|||0000-0003-3017-4266
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Duato Marín, José Francisco
Improving the utilization of shared resources is a key issue to increase performance in SMT processors. Recent work has focused on resource sharing policies to enhance the processor performance, but their proposals mainly concentrate on novel hardware mechanisms that adapt to the dynamic resource requirements of the running threads. This work addresses the L1 cache bandwidth problem in SMT processors experimentally on real hardware. Unlike previous work, this paper concentrates on thread allocation, by selecting the proper pair of co-runners to be launched to the same core. The relation between L1 bandwidth requirements of each benchmark and its performance (IPC) is analyzed. We found that for individual benchmarks, performance is strongly connected to L1 bandwidth consumption, and this observation remains valid when several co-runners are launched to the same SMT core. Based on these findings we propose two L1 bandwidth aware thread to core (t2c) allocation policies, namely Static and Dynamic t2c allocation, respectively. The aim of these policies is to properly balance L1 bandwidth requirements of the running threads among the processor cores. Experiments on a Xeon E5645 processor show that the proposed policies significantly improve the performance of the Linux OS kernel regardless the number of cores considered., This work was supported by the Spanish Ministerio de Econom´ıa y Competitividad (MINECO) and by FEDER funds under Grant TIN2012-38341-C04-01; and by Programa de Apoyo a la Investigacion y Desarrollo (PAID-05-12) of the ´ Universitat Politecnica de Val ` encia under Grant SP20120748
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

ELiRF-UPV at TASS 2020: TWilBERT for Sentiment Analysis and Emotion Detection in Spanish Tweets

  • González-Barba, José Ángel
  • Arias-Moncho, José
  • Pla Santamaría, Ferran
  • Hurtado Oliver, Lluis Felip|||0000-0002-1877-0455
[EN] This paper describes the participation of the ELiRF research group of the Universitat Politècnica de València in the TASS 2020 Workshop, framed within the XXXVI edition of the International Conference of the Spanish Society for the Processing of Natural Language (SEPLN). We present the approach used for the Monolingual Sentiment Analysis and Emotion Detection tasks of the workshop, as well as the results obtained. Our participation has focused mainly on employing an adaptation of BERT for text classification on the Twitter domain and the Spanish language. This system, that we have called TWilBERT, shown systematic improvements of the state of the art in almost all the tasks framed in the SEPLN conference of previous years, and also obtains the most competitive performance in the tasks addressed in this work., This work has been partially supported by the Spanish MINECO and FEDER founds under project AMIC (TIN2017-85854-C4-2-R) and by the GiSPRO project (PROMETEU/2018/176). Work of José-Ángel González is financed by Universitat Politècnica de València under grant PAID-01-17.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Sensing with coupled-core optical fiber Bragg gratings

  • Flores-Bravo, J. A.
  • Zubia, J.
  • Margulis, W.
  • Villatoro, J.
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] Sensitive bending and vibration sensors based on a coupled-core optical fiber with Bragg gratings are proposed and demonstrated. The interrogation of such sensors is cost effective without comprising the sensors performance., This work was supported by the Spanish Ministry of Science and Innovation under projects No. PGC2018-101997-B100 and RTI2018-0944669-BC31 and the Universitat Politècnica de València with the scholarship PAID-01-18.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Load Generators for Automatic Simulation of Urban Fleets

  • Martí, Pasqual|||0000-0001-6406-0641
  • Jordán, Jaume|||0000-0003-0400-9136
  • Palanca Cámara, Javier|||0000-0002-6209-9603
  • Julian, Vicente|||0000-0002-2743-6037
[EN] To ensure cities sustainability, we must deal with, among other challenges, traffic congestion, and its associated carbon emissions. We can approach such a problem from two perspectives: the transition to electric vehicles, which implies the need for charging station infrastructure, and the optimization of traffic flow. However, cities are complex systems, so it is helpful to test changes on them in controlled environments like the ones provided by simulators. In our work, we use SimFleet, an agent-based fleet simulator. Nevertheless, SimFleet does not provide tools for easily setting up big experiments, neither to simulate the realistic movement of its agents inside a city. Aiming to solve that, we enhanced SimFleet introducing two fully configurable generators that automatize the creation of experiments. First, the charging stations generator, which allocates a given amount of charging stations following a certain distribution, enabling to simulate how transports would charge and compare distributions. Second, the load generator, which populates the experiment with a given number of agents of a given type, introducing them dynamically in the simulation, and assigns them a movement that can be either random or based on real city data. The generators proved to be useful for comparing different distributions of charging stations as well as different agent behaviors over the same complex setup., This work was partially supported by MINECO/FEDER RTI2018-095390-B-C31 project of the Spanish government. Pasqual Martí and Jaume Jordán are funded by UPV PAID-06-18 project. Jaume Jordán is also funded by grant APOSTD/2018/010 of Generalitat Valenciana - Fondo Social Europeo.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Estudio con simulaciones Monte Carlo del espectro de neutrones en una sala de tratamiento de protonterapia

  • Díaz-Comeche, A.
  • Oliver-Gil, Sandra|||0000-0001-8258-3972
  • Juste-Vidal, Belen-Jeanne|||0000-0003-1978-3765
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[ES] La protonterapia es una técnica radioterapéutica que consiste en acelerar protones hasta energías de entre 70 y 250 MeV. Su principal ventaja frente a las terapias que emplean fotones o electrones es que la dosis radiactiva se deposita de manera más localizada, por lo que aparecen menos efectos secundarios. Durante este proceso se generan neutrones con energías de hasta 230 MeV, como producto de reacciones (p,n) en el cabezal del acelerador. Estos neutrones contribuyen a la dosis recibida por el paciente, pero normalmente no se tienen en cuenta al planificar el tratamiento. Determinar el espectro energético de los neutrones es fundamental debido a que la dosis que depositan depende, en mayor medida, de su energía. En este trabajo se ha empleado un algoritmo MLEM (Maximum Likelihood Expectation-Maximization) para determinar el espectro neutrónico producido en un cabezal de protonterapia. Dicho espectro se ha reconstruido a partir de simulaciones Monte Carlo en MCNP6.3 que recrean las medidas obtenidas por un espectrómetro de esferas Bonner situado en la salida del cabezal. Las simulaciones Monte Carlo realizadas sirven como primer paso para la medición de un espectro de neutrones experimental en una instalación de protonterapia, así como para la futura validación de modelos que intenten representar las condiciones propias de dichas instalaciones. El espectro obtenido mediante el procedimiento descrito se ajusta al proporcionado por otros trabajos publicados previamente, en los cuales también se han empleado métodos de Monte Carlo. Así, queda demostrada la fiabilidad de la metodología seguida. Se ha estudiado también la variación del espectro resultado de cambiar los parámetros de entrada del algoritmo MLEM, determinando los más eficaces para reconstrucción de espectros de estas características. Así, con este trabajo se abre la puerta a futuras investigaciones en el área de la protonterapia, técnica de especial interés y que ha experimentado un gran auge en los últimos años.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Rammed Earth as an Alternative to Conventional Construction Methods in Valencia: a Comparative Life Cycle Assessment Perspective

  • Quintana-Gallardo, Alberto|||0000-0002-8911-595X
  • Sirera-Cocera, Arturo
  • Zamora-Marina, Eduardo|||0009-0008-8828-4242
  • Sáez, Vanesa
  • Mendiguchia-Fontes, Fernando Aitor
  • Guillén Guillamón, Ignacio Enrique|||0000-0001-5546-1486
[EN] This paper uses a single-family housing model as a case study to evaluate the environmental and thermal performance of rammed earth construction compared to conventional building materials. This study aims to determine which construction method presents a lower environmental impact while maintaining comparable thermal performance. The research begins by defining the physical properties of the earth material used for rammed earth walls through an extensive literature review. Once characterized, construction solutions for the foundation, walls, and roof are proposed. These solutions are validated using thermal transmittance, condensation, and thermal lag analyses, following UNE EN ISO 13786:2000 standards. A single-family housing model is then developed considering local climatic recommendations provided by the Climate Consultant tool. Its thermal performance is assessed by performing a steady-state energy simulation across three distinct climate zones in the Valencian Community: warm and humid (Valencia), cold and dry (Comarca Esport, Utiel-Requena), and warm and dry (Alicante). A comparable model built with conventional materials is also analyzed and adjusted to achieve the same thermal transmittance. The environmental impact is assessed through a Life Cycle Assessment of the A (production) and B (use) phases for both construction methods. This comparative analysis provides insights into the environmental trade-offs between traditional and conventional construction techniques. By quantifying the environmental impacts and thermal performance, this study contributes to the growing discourse on sustainable construction and highlights the potential of rammed earth as an environmentally favorable alternative., The authors gratefully thank the Vicerrectorado de Investigación of the Polytechnic University of Valencia for funding the project “Parametrización de impactos sociales en vivienda: Análisis de Ciclo de Vida Social” (PAID-06-23).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Combining multiple translation systems for spoken language understanding portability

  • García-Granada, Fernando|||0000-0003-2213-4213
  • Hurtado Oliver, Lluis Felip|||0000-0002-1877-0455
  • Sanchís Arnal, Emilio|||0000-0002-6737-4723
  • Segarra Soriano, Encarnación
  • Riccardi, Giussepe
[EN] We are interested in the problem of learning Spoken Language Understanding (SLU) models for multiple target languages. Learning such models requires annotated corpora, and porting to different languages would require corpora with parallel text translation and semantic annotations. In this paper we investigate how to learn a SLU model in a target language starting from no target text and no semantic annotation. Our proposed algorithm is based on the idea of exploiting the diversity (with regard to performance and coverage) of multiple translation systems to transfer statistically stable word-to-concept mappings in the case of the romance language pair, French and Spanish. Each translation system performs differently at the lexical level (wrt BLEU). The best translation system performances for the semantic task are gained from their combination at different stages of the portability methodology. We have evaluated the portability algorithms on the French MEDIA corpus, using French as the source language and Spanish as the target language. The experiments show the effectiveness of the proposed methods with respect to the source language SLU baseline., This work is partially supported by the Spanish MICINN under contract TIN2011-28169-C05-01, and by the Vic. d'Investigacio of the UPV under contracts PAID-00-09 and PAID-06-10 The author work was partially funded by FP7 PORTDIAL project n.296170
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A novel inlet boundary condition for VOF-DNS simulations of the primary breakup of prefilming airblast atomizers

  • Payri, Raul|||0000-0001-7428-5510
  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Carreres, Marcos|||0000-0001-6430-6613
  • Moreno-Montagud, Carlos
[EN] Prefilming airblast atomizers are becoming widely used in state-of-the-art aero engines. The planar configuration experimentally studied by the Karlsruhe Institute of Technology (KIT) has been computationally replicated by different research groups through both Large Eddy Simulation (LES) and Direct Numerical Simulation (DNS). The present investigation reports the use of a novel inlet boundary condition for the DNS study of prefilming airblast atomization that allows accounting not only for the inflow turbulence but also for the temporal evolution of the liquid film thickness at the DNS inlet. The methodology implies the resolution of subsequent singlephase LES, two-phase flow LES and two-phase flow DNS. The former simulations are solved by using the interFoam solver from the OpenFoam toolbox, whereas the latter is computed with the PARIS open-source code. Results for a widely known operating condition show a different degree of atomization when the liquid film thickness evolution is accounted for than the one obtained through the use of a constant liquid film thickness at the domain inlet., Research leading to these results has received funding from the Clean Sky 2 Joint Undertaking under European Union¿s Horizon 2020 research and innovation programme through the ESTiMatE project, grant agreement 821418. We acknowledge PRACE for awarding us access to computational resources on JOLIOT CURIE-AMD at GENCI@CEA, France (proposal 2019204944). Support given to Carlos Moreno by Universitat Politècnica de València through the ¿FPI-Subprograma 2¿ grant within the ¿Programa de Apoyo para la Investigación y Desarrollo (PAID-01-19)¿ is acknowledged. We must thank Marco Crialesi and Wojciech Aniszewski for their technical advice on custom modifications on PARIS, and Johan Sundin for his implementation of the contact angle model. We also thank Achille Schmitter, Hugo Martínez and Lucas González for help processing the 1-phase LES, 2-phase LES and DNS, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Surveying Safety-relevant AI Characteristics

  • Hernández-Orallo, José|||0000-0001-9746-7632
  • Martínez-Plumed, Fernando|||0000-0003-2902-6477
  • Avin, Shahar
  • Heigeartaigh, Sean O.
[EN] The current analysis in the AI safety literature usually combines a risk or safety issue (e.g., interruptibility) with a particular paradigm for an AI agent (e.g., reinforcement learning). However, there is currently no survey of safety-relevant characteristics of AI systems that may reveal neglected areas of research or suggest to developers what design choices they could make to avoid or minimise certain safety concerns. In this paper, we take a first step towards delivering such a survey, from two angles. The first features AI system characteristics that are already known to be relevant to safety concerns, including internal system characteristics, characteristics relating to the effect of the external environment on the system, and characteristics relating to the effect of the system on the target environment. The second presents a brief survey of a broad range of AI system characteristics that could prove relevant to safety research, including types of interaction, computation, integration, anticipation, supervision, modification, motivation and achievement. This survey enables further work in exploring system characteristics and design choices that affect safety concerns, FMP and JHO were supported by the EU (FEDER) and the Spanish MINECO under grant TIN 2015-69175-C4-1-R, by Generalitat Valenciana (GVA) under grant PROME-TEOII/2015/013 and by the U.S. Air Force Office of Scientific Research under award number FA9550-17-1-0287. FMP was also supported by INCIBE (Ayudas para la excelencia de los equipos de investigacion avanzada en ciberseguridad), the European Commission, JRC¿s Centre for Advanced Studies, HUMAINT project (Expert Contract CT-EX2018D335821-101), and UPV PAID-06-18 Ref. SP20180210. JHO was supported by a Salvador de Madariaga grant (PRX17/00467) from the Spanish MECD for a research stay at the Leverhulme Centre for the Future of Intelligence (CFI), Cambridge, and a BEST grant (BEST/2017/045) from GVA for another research stay also at the CFI. JHO and SOH were supported by the Future of Life Institute (FLI) grant RFP2-152. SOH was also supported by the Leverhulme Trust Research Centre Grant RC2015-067 awarded to the Leverhulme Centre for the Future of Intelligence, and a a grant from Templeton World Charity Foundation
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Use and Conservation of Alabaster in Traditional Aragonese Architecture

  • Baró Zarzo, José Luis|||0000-0001-9529-7289
  • La Spina, Vincenzina
  • Pascual-Rubio, Ana|||0000-0002-0172-4129
[EN] Since ancient times alabaster has been used in architecture for many different purposes: as a load bearing material in the construction of walls and columns, in the manufacture of decorative elements (altarpieces, sarcophagi, capitals...), and as a substitute for glass in the illumination of interiors. In Spain, in areas with abundant natural resources, such as the region of Aragon, it is common to find churches and hermitages with alabaster windows and oculi in clerestories and lanterns. In many instances the alabaster plates in these churches and hermitages are broken, detached or have been replaced with different materials. This material can also be found in traditional architecture close to alabaster quarries, including ones no longer in use, and has been used for ashlar plinths or lintel arches. This paper seeks to provide an introductory characterization of the material, the geographical locationof natural resources in Aragon, and the techniques most frequently used in the construction of historic architecture in rural areas, It also offers basic recommendations for the prevention, repair and maintenance of the main pathologies identified., This research has been funded by the Universitat Politècnica de València (PAID-06-22 project).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Aproximación paralela del código termohidráulico de subcanal COBRA-TF

  • Ramos Peinado, Enrique|||0000-0002-5960-5501
  • Jose E. Roman|||0000-0003-1144-6772
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Abarca Giménez, Agustín
La paralelización permite el uso de numerosos procesadores (o núcleos) que colaboren en la obtención de la solución a un único problema. Esto no sólo reduce el tiempo de computación, sino que además aumenta la cantidad de memoria disponible en un clúster. Por tanto pueden resolverse problemas de gran dimensión. Con objeto de validar la paralelización de COBRA-TF se ha modelado a nivel de subcanal un elemento combustible tipo PWR y se ha simulado un pequeño estacionario, obteniéndose una considerable aceleración en la simulación en paralelo comparado con el caso secuencial., Este trabajo ha sido parcialmente esponsorizado por la Universitat Politècnica de València bajo los proyectos COBRA_PAR PAID-05-11-2810 y OpenNUC PAID-05-12.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

The Relativistic Anharmonic Oscillator within a Double-Well Potential

  • Tung, Michael Ming-Sha|||0000-0002-8760-0927
  • Rapp, Frederic
[EN] Non-harmonic oscillations described by a double-well potential allow to model various physical phenomena and provide insight into their properties without overly simplifying the problem, thereby extending the more elementary harmonic case. Important applications of the anharmonic oscillator range from classical instantons and field theory to quantum theory and particle physics [1¿3]. This presentation focuses on the treatment of the anharmonic oscillator in connection with the double-well potential including the non-negligible relativistic effects of a strong and uniform gravitational field. It extends previous work of the relativistic harmonic oscillator to the anharmonic model [4]. Our analysis parts from a relativistic action principle, where the dynamics is described as usual by the corresponding Euler-Lagrange equations. However, complications arise on how to handle the relativistic potential of the strong gravitational field. We proceed by deriving an integral equation for this potential following an approach¿a method introduced by Goldstein & Bender for the brachistochrone problem [5] and more recently applied to the pendulum [6, 7]. Finally, a numerical simulation of the relativistic results is carried out to examine the dynamics of the model and compare it with the purely classical calculations. A detailed study of the phase space for both models will enable us to detect very distinct features among them, and thereby confirms the necessity for including relativistic corrections to yield reliable predictions for the strong-gravity case., This work has been supported by the Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia under Grant PAID-11-21.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Mejoras en la versión paralela del código termohidráulico de subcanal COBRA-TF

  • Ramos Peinado, Enrique|||0000-0002-5960-5501
  • Jose E. Roman|||0000-0003-1144-6772
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Abarca Giménez, Agustín
[ES] Realizar análisis en seguridad nuclear a nivel de varilla de combustible requiere las ejecución de códigos acoplados neutrónicotermohidráulicos que permitan la simulación de grandes dominios físicos en un tiempo razonable. Para ello resulta imprescindible el uso de numerosos procesadores (o núcleos) que colaboren en la obtención de la solución a un único problema utilizando la potencia computacional y de memoria disponible en un clúster. En anteriores trabajos se presentó la paralelización del código termohidráulico de subcanal COBRA-TF (CTF) mediante la tecnología MPI (Message Passing Interface) y utilizando la librería paralela de métodos numéricos PETSc para resolver el sistema lineal de ecuaciones del código. En el presente documento se expondrán las mejoras introducidas en código acoplado, centradas tanto en la parte de optimización de memoria como en paralelismo, además se ha combinado la tecnología MPI y la PVM (Parallel Virtual Machine) para posibilitar el uso del código acoplado CTF/PARCSV2.7., Este trabajo ha sido parcialmente esponsorizado por la Universitat Politècnica de València bajo los proyectos COBRA_PAR PAID-05-11-2810 y OpenNUC PAID-05-12 y por el Ministerio de Economía y Competitividad a través del proyecto NUC-MULTPHYS ENE-2012-34585 financiado por los fondos FEDER de la Unión Europea.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Dynamic beamforming for large area scan in array-based photoacoustic microscopy

  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • García-Garrigos, Juan José
  • Jimenez, Noe|||0000-0002-6539-670X
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
  • Descals, Andreu
[EN] We explore the use of a beamforming method intended for large-area scanning in optical-resolution photoacoustic microscopy. It has been evaluated in a experimental setup that comprises a low-cost laser diode and a phase array with a 128-elements linear probe. Three different beamforming strategies are discussed: no-beamforming, static beamforming and dynamic beamforming. The method has been tested in gelatine-based phantoms as well as ex-vivo organs. Results show that, compared with the other two, dynamic beamforming increases up to 15dB and homogenizes signal-to-noise ratio (SNR) along images of roughly 1 cm2. The method and system presented here could be the baseline for more advanced array-based systems that leverage the low-cost laser sources for clinical applications., This research has been supported by the Spanish Ministry of Science, Innovation and Universities through grant Juan de la Cierva - Incorporacion (IJC2018-037897-I), and program Proyectos I+D+i 2019 (PID2019-111436RB-C22). Action co-financed by the European Union through the Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) of the Comunitat Valenciana 2014-2020 (IDIFEDER/2018/022). A.C. received financial support from Generalitat Valenciana and Universitat Politecnica de Val ` encia through the grants APOSTD/2018/229 and program PAID-10-19, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Reconstrucción del Espectro De Rayos X con Flat Panel, Cuña de Pmma y el Método Monte Carlo

  • Pozuelo, Fausto
  • Querol Vives, Andrea
  • Juste-Vidal, Belen-Jeanne|||0000-0003-1978-3765
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • Ródenas Diago, José|||0000-0003-3283-9188
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[ES] La obtención del espectro primario de rayos X permite determinar la calidad de un haz de fotones producido por un tubo de rayos X, ya que las características dosimétricas de un haz de radiación tienen una relación directa con el espectro primario de rayos X. En este trabajo se estudian las curvas de dosis en profundidad obtenidas dentro del intervalo energético de radiodiagnóstico, entre 40 y 130 keV. La metodología seguida en el trabajo se basa en la reconstrucción del espectro mediante métodos matemáticos a partir de la curva de dosis en profundidad en una cuña de metacrilato y recogida en un flat panel. La reconstrucción del espectro podría suponer una mejora dentro de los controles de calidad de tubos de rayos X al permitir una estimación, más próxima a la real, de la dosis impartida a los pacientes. Existe una estrecha relación entre la curva de dosis en profundidad en el eje central de la cuña de metacrilato y el haz de fotones emitido por el tubo de rayos X. Dicha relación, se basa en la teoría de que la curva de dosis en profundidad puede expresarse como la superposición lineal de las contribuciones de un continuo de haces de fotones monoenergéticos, cada uno ponderado por la fluencia de fotones en cada rango de energía. Los distintos métodos inversos utilizados permiten mejorar la precisión con la que los espectros son obtenidos. Estas técnicas han sido aplicadas a los resultados de dosis obtenidos mediante simulación utilizando los programas basados en el método de Monte Carlo, PENELOPE y MCNP5. Los resultados de las curvas de dosis en profundidad simulados se han comparado con los resultados experimentales estudiando la influencia en la dosis suministrada al paciente debida a los métodos de simulación. Para ello se ha calculado el error cuadrático medio en ambos casos., Este trabajo, ha sido parcialmente financiado por la Generalitat Valenciana dentro del proyecto de investigación GVPRE/2008/136, y la Universitat Politècnica de València dentro del proyecto PAID‐06‐07‐3300. Así como por la beca de Formación de Profesorado Universitario (FPU) del Ministerio de Educación y Ciencia, referencia AP2009‐2600.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Features and limitations in the use of alabaster in architecture

  • Baró Zarzo, José Luis|||0000-0001-9529-7289
  • López Patiño, Mª Gracia|||0000-0002-0136-5613
  • Vercher Sanchis, José|||0000-0001-9855-4201
  • Lerma Elvira, Carlos|||0000-0003-0436-3725
[EN] Alabaster is a noble material that has been used since antiquity for its precious marble-like appearance, its waxy brilliance, its easy workability, and its translucent condition. For this reason, its main application has been in the fields of sculpture and architecture, in the first case, to produce altarpieces, doorways, sarcophagi, etc., and in the second, for protection and lighting purposes, cut into thin sheets, as well as for structural purposes, either in blocks for ashlars or in linear pieces for columns. Currently, the use of alabaster in architecture is limited to the first of these two functions, either for natural lighting or for backlighting with artificial light. The latter use shares an interest with the world of design. On the other hand, despite this excellent performance, we cannot forget their limitations when it comes to achieving good durability. Alabaster is still a variety of gypsum - calcium sulphate dihydrate - and this brings with it the disadvantages of this mineral compound when used as a building material under certain conditions. In addition to the low hardness, fragility, water solubility and calcinability when exposed to sunlight, there is also the maximum size of the pieces and the need for breathability. The aim of this communication is to provide recommendations for its correct application in architectural lighting, in order to optimize the advantages and avoid the disadvantages., This research has been funded by the Universitat Politècnica de València through the research project PAID-06-22. The authors would like to thank the companies Arastone S.A. and Sarreal Art i Llum S.A. for their collaboration in bringing this research to a successful conclusion.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Personal Data Flows and Privacy Policy Traceability in Third-party LLM Apps in the GPT Ecosystem

  • Carrillo-Moraga, Juan Carlos
  • Martin-Navarro, Jose Luis|||0000-0002-4503-4189
  • Such Aparicio, José Miguel|||0000-0002-6041-178X
  • Ma, Rongjun
[EN] The rapid growth of platforms for customizing Large Language Models (LLMs), such as OpenAI's GPTs, has raised new privacy and security concerns, particularly related to the exposure of user data via third-party API integrations in LLM apps. To assess privacy risks and data practices, we conducted a large-scale analysis of OpenAI¿s GPTs ecosystem. Through the analysis of 5,286 GPTs and the 44,102 parameters they use through API calls to external services, we systematically investigated the types of user data collected, as well as the completeness and discrepancies between actual data flows and GPTs' stated privacy policies. Our results highlight that approximately 35% of API parameters enable the sharing of sensitive or personally identifiable information, yet only 15% of corresponding privacy policies provide complete disclosure. By quantifying these discrepancies, our study exposes critical privacy risks and underscores the need for stronger oversight and support tools in LLM-based application development. Furthermore, we uncover widespread problematic practices among GPT creators, such as missing or inaccurate privacy policies and a misunderstanding of their privacy responsibilities. Building on these insights, we propose design recommendations that include actionable measurements to improve transparency and informed consent, enhance creator responsibility, and strengthen regulation., This research was partially funded by the INCIBE s strategic SPRINT (Seguridad y Privacidad en Sistemas con Inteligencia Artificial) C063/23 project with funds from the EU-NextGenerationEU through the Spanish government s Plan de Recuperación, Transformación y Resiliencia; by the Spanish Government via project PID2023- 151536OB-I0; and by the Generalitat Valenciana via project PROMETEO CIPROM/2023/23.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Reduced Myofilament Contraction in Human Heart Failure. Insights From Electromechanical Simulations

  • Mora-Fenoll, María Teresa|||0000-0002-8069-2486
  • Trenor Gomis, Beatriz Ana|||0000-0001-9166-6112
  • Gutiérrez, Sofía
  • Dasi, Albert
  • Gómez García, Juan Francisco
[EN] Intracellular Ca2+ is the main activator of myofilament contraction and the altered Ca2+ handling observed in failing cells has been established as the leading cause of reduced inotropy in heart failure. Electrophysiological studies usually quantify Ca2+ transients to estimate contractile effects. However, heart failure remodeling of myofilaments also occurs, modifying the correlation between Ca2+ and force. The aim of this study was to analyze myofilament tension generated by action potentials in human heart failure. In a ventricular electromechanical model we investigated cellular contraction force associated with intracellular Ca2+ in heart failure by implementing the characteristic electrophysiological, beta-adrenergic, and mechanical changes. Despite the inotropic myofilament remodeling induced by heartfailure, the maximal active tension in failing cells was one third of the force generated in normal cells. With isoproterenol, beta-adrenergic stimulation increased systolic Ca2+, which enhanced myofilament tension by up to 150%, but failing cells also showed a smaller contraction force compared to normal. We observed that contractility was very sensitive to changes in intracellular Ca2+, confirming that increasing Ca2+ peak would improve contraction in heart failure., This work was partially supported by the "Plan Estatal de Investigación Científica y Técnica y de Innovación 2017-2020" from the Ministerio de Ciencia e Innovación y Universidades (PID2019-104356RB-C41/AEI/10.13039/501100011033) and by the Dirección general de PolíticaCientífica de la Generalitat Valenciana (PROMETEO/2020/043). MTM is being funded by "Programa de Ayudas de Investigación y Desarrollo (PAID-01-17)" from the Universitat Politècnica de València
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Desarrollo y evaluación de una estación de control de tierra para vehículos aéreos no tripulados

  • Velasco Carrau, Jesús
  • Reynoso Meza, Gilberto
  • Garcia-Nieto, Sergio|||0000-0002-2722-742X
  • Sanchís Saez, Javier|||0000-0001-9697-2696
Los vehículos aéreos no tripulados (UAV¿s) son vehículos autónomos, diseñados para cumplir con diversas misiones en el ámbito civil y militar. Actualmente, se comienza a extender su uso en situaciones donde la misión de vuelo conlleva la posibilidad de riesgo de pérdidas humanas. En el siguiente documento, se describe el desarrollo del sistema de telemetría para la gestión de las comunicaciones entre dispositivos UAVs y las estaciones de tierra que monitorizan el comportamiento de estos sistemas.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Camera Characterisation Based on Skin-Tone Colours for Rock Art Recording

  • Molada-Tebar, Adolfo
  • Marqués-Mateu, Ángel|||0000-0003-1343-103X
  • Lerma, José Luis|||0000-0001-9443-9214
[EN] Image-based characterisation offers accurate results for colour recording in cultural heritage documentation tasks. Although numerous researches are focused on improving either the mathematical model used or the workflow technical details, in this paper we propose the use of selected skin-tone colours instead of the full colour checker dataset. Even though the two datasets yield good colourimetric results, an improvement is observed when using the skin-tone samples. The results reveal two key aspects in the characterisation procedure, specifically the number of samples and the use of training data near the chromatic range of the scene used in the characterisation procedure itself., This research is partly funded by the Research and Development Aid Program PAID-01-16 of the Universitat Politècnica de València, through FPI-UPV-2016 Sub 1 grant. The authors also gratefully acknowledge the financial support from the Spanish Ministerio de Economía y Competitividad through the project HAR2014-59873-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

La práctica de construir sobre lo construido en la arquitectura maya: análisis comparativo de tres edificios piramidales, Building on the built in Maya architecture: comparative analysis of three pyramidal buildings

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Does AI Qualify for the Job?: A Bidirectional Model Mapping Labour and AI Intensities

  • Martínez-Plumed, Fernando|||0000-0003-2902-6477
  • Hernández-Orallo, José|||0000-0001-9746-7632
  • Tolan, Songül
  • Pesole, Annarosa
  • Fernández-Macías, Enrique
  • Gómez, Emilia
[EN] In this paper we present a setting for examining the relation between the distribution of research intensity in AI research and the relevance for a range of work tasks (and occupations) in current and simulated scenarios. We perform a mapping between labour and AI using a set of cognitive abilities as an intermediate layer. This setting favours a two-way interpretation to analyse (1) what impact current or simulated AI research activity has or would have on labour-related tasks and occupations, and (2) what areas of AI research activity would be responsible for a desired or undesired effect on specific labour tasks and occupations. Concretely, in our analysis we map 59 generic labour-related tasks from several worker surveys and databases to 14 cognitive abilities from the cognitive science literature, and these to a comprehensive list of 328 AI benchmarks used to evaluate progress in AI techniques. We provide this model and its implementation as a tool for simulations. We also show the effectiveness of our setting with some illustrative examples., This material is based upon work supported by the EU (FEDER), and the Spanish MINECO under grant RTI2018-094403-B-C3, the Generalitat Valenciana PROMETEO/2019/098. F. Martínez-Plumed was also supported by INCIBE (Ayudas para la excelencia de los equipos de investigación avanzada en ciberseguridad), the European Commission (JRC) HUMAINT project (CT-EX2018D335821-101), and UPV (PAID-06-18). J. H-Orallo is also funded by an FLI grant RFP2-152.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A Cooperative Decision Making Algorithm for Wireless Location Systems Using Interlinking Data

  • García Pineda, Miguel
  • Bri Molinero, Diana
  • Tomás Gironés, Jesús|||0000-0002-0358-0325
  • Lloret, Jaime|||0000-0002-0862-0533
Nowadays, several wireless location systems have been developed in the research world. The goal of these systems has always been to find as greatest accuracy as possible. But, if every node takes data from the environment, we could gather a lot of information, which may help us to know what is happening around our network. In order to obtain the correct conclusion, we have developed an algorithm based on interlinking data. These data come from several nodes, and each node can give us one or several parameters. Our algorithm deals these data cooperatively in order to find the connection between them and provide the environmental behavior. This algorithm is based on statistical methods due to the fact that it involves an observational experiment. Finally, our cooperative decision making algorithm is tested on a wireless location system. The results show that this algorithm works properly and we are able to know what is happening around our wireless location system when we use it. © 2013 Springer-Verlag Berlin Heidelberg., This work is supported by the “Ministerio de Ciencia e Innovación”, through the “Plan Nacional de I+D+I 2008-2011”, project TEC2011-27516 and by the “Universitat Politècnica de Valencia” through “PAID-05-12”
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

The MLLP-UPV German-English Machine Translation System for WMT18

  • Iranzo-Sánchez, Javier
  • Baquero-Arnal, Pau
  • Martínez-Villaronga, Adrià
  • Garcés Díaz-Munío, Gonçal|||0000-0002-2594-5858
  • Civera Saiz, Jorge|||0000-0002-0963-0143
  • Juan, Alfons|||0000-0002-9984-4072
[EN] This paper describes the statistical machine translation system built by the MLLP research group of Universitat Politècnica de València for the German¿English news translation shared task of the EMNLP 2018 Third Conference on Machine Translation (WMT18). We used an ensemble of Transformer architecture¿based neural machine translation systems. To train our system under ¿constrained¿ conditions, we filtered the provided parallel data with a scoring technique using character-based language models, and we added parallel data based on synthetic source sentences generated from the provided monolingual corpora., The research leading to these results has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement no. 761758 (X5gon); the Spanish government's TIN2015-68326-R (MINECO/FEDER) research project MORE, university collaboration grant programme 2017-2018, and faculty training scholarship FPU13/06241; the Generalitat Valenciana's predoctoral research scholarship ACIF/2017/055; as well as the Universitat Politecnica de València's PAID-01-17 R&D support programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

La situación de la academia en la administración del territorio en España e Iberoamérica

  • Femenia-Ribera, Carmen|||0000-0003-3105-9649
  • Mora-Navarro, Gaspar|||0000-0002-2267-2188
  • Marques-Perez, Inmaculada|||0000-0002-1059-6288
[EN] The situation of the academy in land administration in Spain and Iberoamerica: This research aims to show the current collaborative relationship between the organisms implied in land management in Spain, from the academic point of view of knowledge management, and related to geographical information. The main entities are presented: the cadastre (Spanish Directorate General for Cadastre, DGC), the land registry, as rights registry (represented by Spanish Land and Trade Registrars Association, CORPME), the specialist technicians (Spanish Official Corporation of Engineering in Geomatics and Land Surveying, COIGT), and the universities that train those technicians. The legal framework and the principal characteristics of each organism, related to land administration, are presented. Since Spanish law 13/2015, coordination between the cadastre and the land registry is possible. Law 13/2015 has allowed a considerable advance, concerning the graphical demarcation of properties. Knowledge management in land management has been widespread through courses, events, congresses, collaboration protocols, professional certifications and new ad-hoc masters, which have had remarkable growth since 2016. Land management knowledge interchange is also happening between Spain and Latin America, with the support of the Spanish Agency for International Development Cooperation (AECID), DGT and CORPME. Iberoamerica primary international organisms and universities, related to land administration are presented. The principal conclusion is that more academic representation in land administration is needed in Iberoamerica., [ES] La situación de la academia en la administración del territorio en España e Iberoamérica: Se pretende mostrar la relación y colaboración existente actualmente entre los organismos implicados en la administración del territorio en España; desde el punto de vista académico de gestión del conocimiento y relacionado con la información cartográfica Para ello, se presentan los principales entes implicados, como son: el catastro (Dirección General del Catastro, DGC); el registro de la propiedad, como registro de derechos (representado por el Colegio de Registradores de la Propiedad y Mercantiles de España, CORPME); los técnicos especialistas (Colegio Oficial de Ingeniería en Geomática y Topografía, COIGT), y las Universidades que forman a estos técnicos. Se presenta el marco español y las características fundamentales de cada organismo relacionado con la administración del territorio en España. Con mucha mayor implicación en temas cartográficos, desde la implantación de la Ley 13/2015, que permite la coordinación gráfica entre el Catastro y el Registro de la Propiedad. Dicha ley ha permitido un gran avance a nivel nacional respecto a la delimitación gráfica de la propiedad en España. La gestión del conocimiento en estos temas se ha extendido a toda la sociedad a través de jornadas, cursos, eventos, protocolos de colaboración, certificación de personas, promoción de formación de títulos propios,... de muy diversa índole, que han crecido notablemente desde el año 2016. La gestión del conocimiento también se presenta desde España a Latinoamérica con apoyos de la Agencia Española de Cooperación y Desarrollo (AECID) a la DGC y al CORPME. Como breve estudio en iberoamérica, se muestran los principales organismos internacionales relacionados con la administración del territorio, y se enumeran las entidades académicas universitarias presentes desde el ámbito iberoamericano. De ello, se puede extraer la conclusión que hay muy poca representación académica., Financiado con Ayuda a Primeros Proyectos de Investigación (PAID-06-22), Vicerrectorado de Investigación de la Universitat Politècnica de València (UPV). Se cuenta con el apoyo del Colegio Oficial de Ingeniería Geomática y Topográfica (COIGT), y la Escuela Técnica Superior de Ingeniería Geodésica, Cartográfica y Topográfica (ETSIGCT) y el Departamento de Ingeniería Cartográfica, Geodesia y Fotogrametría (DICGF) de la UPV. Se agradece la colaboración de la DGC y el CORPME.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Towards a Classifier to Recognize Emotions Using Voice to Improve Recommendations

  • Fuentes-López, José Manuel
  • Rincón Arango, Jaime Andrés
  • Taverner-Aparicio, Joaquín José|||0000-0002-5163-5335
  • Botti V.|||0000-0002-6507-2756
[EN] The recognition of emotions in tone voice is currently a tool with a high potential when it comes to making recommendations, since it allows to personalize recommendations using the mood of the users as information. However, recognizing emotions using tone of voice is a complex task since it is necessary to pre-process the signal and subsequently recognize the emotion. Most of the current proposals use recurrent networks based on sequences with a temporal relationship. The disadvantage of these networks is that they have a high runtime, which makes it difficult to use in real-time applications. On the other hand, when defining this type of classifier, culture and language must be taken into account, since the tone of voice for the same emotion can vary depending on these cultural factors. In this work we propose a culturally adapted model for recognizing emotions from the voice tone using convolutional neural networks. This type of network has a relatively short execution time allowing its use in real time applications. The results we have obtained improve the current state of the art, reaching 93.6% success over the validation set., This work is partially supported by the Spanish Government project TIN2017-89156-R, GVA-CEICE project PROMETEO/2018/002, Generalitat Valenciana and European Social Fund FPI grant ACIF/2017/085, Universitat Politecnica de Valencia research grant (PAID-10-19), and by the Spanish Government (RTI2018-095390-B-C31).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Europarl-ASR: A Large Corpus of Parliamentary Debates for Streaming ASR Benchmarking and Speech Data Filtering/Verbatimization

  • Garcés Díaz-Munío, Gonçal|||0000-0002-2594-5858
  • Silvestre Cerdà, Joan Albert|||0000-0003-2291-8296
  • Jorge-Cano, Javier|||0000-0002-9279-6768
  • Giménez Pastor, Adrián
  • Civera Saiz, Jorge|||0000-0002-0963-0143
  • Sanchis Navarro, José Alberto|||0000-0002-2943-0990
  • Juan, Alfons|||0000-0002-9984-4072
  • Iranzo-Sánchez, Javier
  • Baquero-Arnal, Pau
  • Roselló, Nahuel
  • Pérez-González de Martos, Alejandro Manuel
[EN] We introduce Europarl-ASR, a large speech and text corpus of parliamentary debates including 1300 hours of transcribed speeches and 70 million tokens of text in English extracted from European Parliament sessions. The training set is labelled with the Parliament¿s non-fully-verbatim official transcripts, time-aligned. As verbatimness is critical for acoustic model training, we also provide automatically noise-filtered and automatically verbatimized transcripts of all speeches based on speech data filtering and verbatimization techniques. Additionally, 18 hours of transcribed speeches were manually verbatimized to build reliable speaker-dependent and speaker-independent development/test sets for streaming ASR benchmarking. The availability of manual non-verbatim and verbatim transcripts for dev/test speeches makes this corpus useful for the assessment of automatic filtering and verbatimization techniques. This paper describes the corpus and its creation, and provides off-line and streaming ASR baselines for both the speaker-dependent and speaker-independent tasks using the three training transcription sets. The corpus is publicly released under an open licence., [CA] "Europarl-ASR: Un extens corpus parlamentari de referència per a reconeixement de la parla i filtratge/literalització de transcripcions": Presentem Europarl-ASR, un extens corpus de veu i text de debats parlamentaris amb 1300 hores d'intervencions transcrites i 70 milions de paraules de text en anglés extrets de sessions del Parlament Europeu. Les transcripcions oficials del Parlament Europeu, no literals, s'han sincronitzat per a tot el conjunt d'entrenament. Com que l'entrenament de models acústics requereix transcripcions com més literals millor, també s'han inclòs transcripcions filtrades i transcripcions literalitzades de totes les intervencions, basades en tècniques de filtratge i literalització automàtics. A més, s'han inclòs 18 hores de transcripcions literals revisades manualment per definir dos conjunts de validació i avaluació de referència per a reconeixement automàtic de la parla en temps real, amb oradors coneguts i amb oradors desconeguts. Pel fet de disposar de transcripcions literals i no literals, aquest corpus és també ideal per a l'anàlisi de tècniques de filtratge i de literalització. En aquest article, es descriu la creació del corpus i es proporcionen mesures de referència de reconeixement automàtic de la parla en temps real i en diferit, amb oradors coneguts i amb oradors desconeguts, usant els tres conjunts de transcripcions d'entrenament. El corpus es fa públic amb una llicència oberta., This work has received funding from the EU's H2020 research and innovation programme under grant agreements 761758 (X5gon) and 952215 (TAILOR); the Government of Spain's research project Multisub (RTI2018-094879-B-I00, MCIU/AEI/FEDER,EU) and FPU scholarships FPU14/03981 and FPU18/04135; the Generalitat Valenciana's research project Classroom Activity Recognition (PROMETEO/2019/111) and predoctoral research scholarship ACIF/2017/055; and the Universitat Politecnica de València's ` PAID-01-17 R&D support programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Hydronium Detection in Hardened Concrete

  • Martínez-Ibernón, Ana|||0000-0003-2136-5650
  • Gandía-Romero, Jose M.|||0000-0003-0257-3286
  • Gasch, Isabel|||0000-0001-7036-4481
  • Valcuende Payá, Manuel Octavio|||0000-0002-9967-1554
[EN] The monitoring of reinforced concrete structures allows us to detect the presence of aggressive agents into of the concrete matrix, on site and in a real time. These aggressive agents can produce the unexpected failure of the structures, thus discovering their presence is a fundamental aspect in the preservation of people safety and the durability of the structure. On the other hand, helps to reduce the cost of maintenance and repair operations, due to allow us to identify the problems faster, minimizing the intervention to be done. The present research paper was focused in the hydronium detection; the reduction of this species generates hydrogen, the hydrogen produces the embrittlement and cracking of the steel, which seriously compromises the right behaviour of the structure. The problem of hydrogen appears in industries such as ammonia processing or petrochemistry industries and nuclear power plants. All of them are industries in which a failure seriously compromises the welfare of people and the environment. Therefore, the detection of hydrogen penetration in reinforcement concrete structures in these cases are very interesting. In this study, with the purpose to detect the hydronium or hydrogen in the hardened concrete matrices is proposed the use of voltammetric sensor, which is part of a multisensory system called Electronic-Tongue. This is a preliminary study. The objective of these initial steps was to evaluate the detection capability of the sensor. Currently, have been designing a sequential test in order to evaluate the sensor in different partial hydrogen pressures with the purpose to develop mathematical models to the hydronium or hydrogen detection and quantification in hardened concrete matrix., The authors would like to express their gratitude to the Spanish Ministry of Science and Innovation for the pre-doctoral scholarship granted to Ana Martínez Ibernón (FPU 16/00723). Also, to the Universitat Politècnica de València for the financial support in the project ¿Ayudas a Primeros Proyectos de Investigación (PAID-06-18)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Study of long term fouling on cross flow ultrafiltration

  • Cantó Polo, Rocío Águeda
  • Vincent Vela, Maria Cinta|||0000-0001-8493-0165
  • Cuartas Uribe, Beatriz Elena|||0000-0003-2835-900X
  • Alvarez Blanco, Silvia
  • Lora-García, Jaime|||0000-0003-1699-5404
Ultrafiltration (UF) is a membrane technique whereby water and microsolutes are separated from macromolecules. It has several applications in wastewater treatment and it is also widely used in chemical and food industries. The main disadvantage of UF is membrane fouling, which causes a decline in permeate flux with time. As permeate flux decline highly increases the operation costs, the time-dependence of permeate flux has been studied in many occasions. Most of these studies use protein aqueous solutions (bovine serum albumin, hemoglobin, cheese whey among others) as feed. However, as proteins are charged molecules, they interact with the membrane and their interactions are influenced by the pH of the solution, so the models applied to these kinds of feed solutions should include membrane-solute interaction. When using polythylene glycol (PEG) these interactions may not be considered and the models are simplified., The authors of this work wish to acknowledge the financial support of the Universitat Politècnica de València throught the project "Primeros proyectos de Investigación: Programa de Apoyo a la Investigación y Desarrollo PAID-06-10" and the Spanish Ministry of Science and Innovation throught the project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Program slicing with exception handling

  • Galindo, Carlos|||0000-0002-3569-6218
  • Silva, Josep|||0000-0001-5096-0008
  • Pérez-Rubio, Sergio
[EN] Program slicing is a technique for program analysis and transformation with many different applications such as program debugging, program specialization, and parallelization. The system dependence graph (SDG) is the most commonly used data structure for program slicing. In this paper, we show that the presence of exception-handling constructs can make the SDG produce incorrect and sometimes even incomplete slices. We showcase the instances of incorrectness and incompleteness and we propose a framework for correctly handling exception-related instructions, which includes representation of all possible exception throwing and catching mechanisms, and a new kind of control dependence: conditional control dependence; which produces more precise slices in the presence of catch statements., This work is partially supported by the EU (FEDER) and the Spanish MCI/AEI under Grant No.: TIN2016-76843-C4-1-R and PID2019-104735RB-C41, and by the Generalitat Valenciana under grant Prometeo/2019/098 (DeepTrust). Sergio Pérez was partially supported by Universitat Politècnica de València under FPI grant PAID-01-18.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Few-mode fibre delay lines with inscribed long period gratings for radiofrequency signal processing

  • García-Cortijo, Sergi|||0000-0002-7237-9457
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Gasulla Mestre, Ivana|||0000-0001-8088-7796
  • Guillem-Cogollos, Rubén
[EN] We propose and experimentally demonstrate distributed radiofrequency signal on a few-mode-fibre device. The inscription of long period gratings at specific locations along the fibre allows the excitation of the higher-order modes while adjusting the modal group delays required for sample true time delay line operation., This research was supported by the ERC Consolidator Grant 724663, Universitat Politècnica de València PAID-01-18 scholarship for J. Madrigal and the Spanish MINECO through: TEC2016-80150-R Project, BES-2015-073359 scholarship for S. García, IJCI-2017-32476 fellowship for D. Barrera and RYC-2014-16247 fellowship for I. Gasulla. We thank Prysmian for providing the FMF and Cailabs for providing the mode multiplexers.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Diseño de un controlador de memoria principal híbrido para aplicaciones de Big Data

  • Lurbe, Manel
  • Avargues, Miguel A.
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[ES] La tecnologia de memoria DRAM ha sido la dominante en las implementaciones del subsistema de memoria. En los ultimos años, e impulsada principalmente por las enormes demandas de memoria de las aplicaciones de big data, la tecnologia NVRAM ha emergido como una tecnologia de memoria m¿as densa, permitiendo el diseño de nuevas jerarquias de memoria hibridas DRAM/NVRAM que combinan multiples tecnologias de memoria para equilibrar capacidad, latencia, coste y persistencia. En el diseño de jerarquias de memoria hibridas se est¿an aplicando dos enfoques principales: el enfoque de espacio de direcciones hibrido DRAM/NVRAM, que confia en el programador o el sistema operativo para elegir la tecnologia de memoria en la que debe almacenarse cada pagina de memoria; y el enfoque de espacio de direcciones (unico) NVRAM, en el que se necesita una tecnologia mas rapida (por ej., DRAM convencional) que actue como cache de la NVRAM para aumentar las prestaciones. Este enfoque presenta retos arquitectonicos como la organizacion de metadatos. En contraste con los enfoques existentes, este trabajo propone un controlador de memoria que aprovecha tecnologias de memoria recientes como eDRAM y MRAM para mejorar las prestaciones de la lenta memoria NVRAM cuando actua como memoria principal. La propuesta consiste en una jerarquia de cache de dos niveles en el controlador de memoria: una cache de sectores SRAM y una cache (x)RAM. La cache (x)RAM, mucho mas densa, ayuda a reducir significativamente el numero de accesos a la NVRAM. Los resultados experimentales demuestran que la implementaci¿on de la cache (x)RAM con eDRAM o MRAM es el metodo mas eficaz. Ademas, la eDRAM es capaz de mejorar la penalizacion en caso de fallo de la cache SRAM hasta en un 50 % y un 80 %, y las prestaciones globales del sistema en un 15 % y un 23 %., Este trabajo ha sido financiado por el Ministerio de Ciencia e Innovacion español y el FEDER europeo mediante las subvenciones PID2021-123627OBC51 y TED2021-130233B-C32. Manel Lurbe cuenta con el apoyo de Ayudas para Contratos predoctorales UPV - subprograma 1 (PAID-01-20).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Wideband phantoms of different body tissues for heterogeneous models in body area networks

  • Castelló-Palacios, Sergio|||0000-0003-4689-652X
  • Garcia-Pardo, Concepcion|||0000-0002-2774-980X
  • Fornés Leal, Alejandro|||0000-0001-5914-6045
  • Cardona Marcet, Narciso|||0000-0001-5697-1453
  • Vallés Lluch, Ana|||0000-0002-7896-8666
[EN] One of the key issues about wireless technologies is their interaction with the human body. The so-called internet of things will comprise many devices that will transmit either around or through the human body. These devices must be tested either in their working medium, when possible, or in the most realistic one. For this purpose, tissue-like phantoms are the best alternative to carry out realistic analyses of the performance of body area networks. In addition, they are the conventional way to certify the compliance of commercial standards by these devices. However, the number of phantoms that work in large bandwidths is limited in literature. This work aims at presenting chemical solutions that will be useful to prepare a variety of wideband tissue phantoms. Besides, the colon was mimicked in two ways, the healthy tissue and the malignant one, taking into account studies that relate changes on the relative permittivity with cancer. They were designed on the basis of acetonitrile in aqueous solutions as described in a previous work. Thus, many scenarios could be developed such as multilayers which imitate parts of the heterogeneous body., Research supported by the Programa de Ayudas de Investigación y Desarrollo (PAID-01-16) from Universitat Politècnica de València, by the Ministerio de Economía y Competitividad, Spain (TEC2014-60258-C2-1- R) and by the European FEDER Funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Approximation to the Environmental Impact of the House of Gongora, Cehegín (Murcia, Spain): an LCA Perspective

  • Quintana-Gallardo, Alberto|||0000-0002-8911-595X
  • Sandoval-Gómez, Francisco
  • Celina-Sáez, Vanesa
  • Zamora-Marina, Eduardo|||0009-0008-8828-4242
  • Secondo Maglia, Juan Gabriel|||0009-0005-0904-4311
  • Mendiguchia-Fontes, Fernando Aitor
  • Guillén Guillamón, Ignacio Enrique|||0000-0001-5546-1486
[EN] This paper deals with an approximation to the environmental impacts of constructing the historic House of Góngora in Cehegín (Murcia), originally built in the 16th century using traditional earth architecture. By analyzing historical construction methods, materials, and energy use, the study approximates the environmental footprint of the house during its original construction. It then compares this with the estimated impacts of building an equivalent structure today, which would imply changes in techniques, methods and regulations. The comparison considers key environmental indicators such as carbon emissions, resource extraction, obtained using the Environmental Footprint LCA methodology. The paper highlights the sustainability inherent in traditional earth architecture and contrasts it with the challenges and benefits of contemporary construction practices. The findings question the idea of sustainability as a contemporary issue and reveal insights into the ecological trade-offs between historical and modern construction methods, emphasizing the potential for re-integrating sustainable practices from the past into modern architecture. This study contributes to ongoing discussions on sustainable construction and the relevance of traditional methods in reducing environmental impact. , Authors AQG, IGG, FAM and FSG gratefully thank the Spanish Ministry of Science, Innovation and Universities for funding the project Earth4Future “Sustainable reuse of earthen architecture and its lessons for contemporary architecture” (PID2022139154OB-I00) under the Proyectos de Generación de Conocimiento 2022 call. Authors AQG and IGG gratefully thank the Vicerrectorado de Investigación of the Polytechnic University of Valencia for funding the project “Parametrización de impactos sociales en vivienda: Análisis de Ciclo de Vida Social” (PAID-06-23).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Transmisión inalámbrica multimedia coordinada con DASH-SAND

  • Belda Ortega, Román|||0000-0003-2244-2371
  • Guerri Cebollada, Juan Carlos|||0000-0002-5807-1923
  • De Fez Lava, Ismael
[EN] The adoption of DASH (Dynamic Adaptive Streaming over HTTP) as a video transmission standard has introduced new challenges in environments with high density of Wi-Fi clients. If video players do not take into account the playback status of other devices in the network unfair bandwidth distribution may cause playback problems (stalls, low playback quality, etc.). This paper proposes a collaborative playback technique based on DASH-SAND (MPEG¿s Server and Network Assisted DASH) that aims to reduce, in a collaborative way, the number of interruptions in the playback of multimedia content in Wi-Fi environments with high density of users. Results prove that the proposed solution reduces both the number and duration of stalls at the expense of decreasing the average representation of the playback., Este trabajo ha sido subvencionado por el Programa PAID10-18 así como por el Proyecto Línea de I+D+i Tecnologías de distribución y procesado de información multimedia y QoE de la Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Towards Simultaneous Machine Interpretation

  • Pérez-González de Martos, Alejandro Manuel
  • Iranzo-Sánchez, Javier
  • Giménez Pastor, Adrián
  • Jorge-Cano, Javier|||0000-0002-9279-6768
  • Silvestre Cerdà, Joan Albert|||0000-0003-2291-8296
  • Civera Saiz, Jorge|||0000-0002-0963-0143
  • Sanchis Navarro, José Alberto|||0000-0002-2943-0990
  • Juan, Alfons|||0000-0002-9984-4072
[EN] Automatic speech-to-speech translation (S2S) is one of the most challenging speech and language processing tasks, especially when considering its application to real-time settings. Recent advances on streaming Automatic Speech Recognition (ASR), simultaneous Machine Translation (MT) and incremental neural Text-To-Speech (TTS) make it possible to develop real-time cascade S2S systems with greatly improved accuracy. On the way to simultaneous machine interpretation, a state-of-the-art cascade streaming S2S system is described and empirically assessed in the simultaneous interpretation of European Parliament debates. We pay particular attention to the TTS component, particularly in terms of speech naturalness under a variety of response-time settings, as well as in terms of speaker similarity for its cross-lingual voice cloning capabilities., Work supported by the EU s H2020 research and innovation programme under grant agreement no. 761758 (X5gon), the Spanish government under grant RTI2018-094879-B-I00 (Multisub, MCIU/AEI/FEDER), and the Universitat Politecnica de Valencia s PAID-01-17 R&D support programme
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Towards the edge intelligence: Robot assistant for the detection and classification of human emotions

  • Rincón Arango, Jaime Andrés
  • Julian, Vicente|||0000-0002-2743-6037
  • Carrascosa Casamayor, Carlos|||0000-0003-3649-6530
[EN] Deep learning is being introduced more and more in our society. Nowadays, there are very few applications that do not use deep learning as a classification tool. One of the main application areas is focused on improving people¿s life quality, allowing to create personal assistants with canned benefits. More recently, with the proliferation of mobile computing and the emergence of the Internet of Things (IoT), billions of mobile and IoT devices are connected to the Internet. This allows the generation of millions of bytes of information about sensors, images, sounds, etc. Driven by this trend, there is an urgent need to push the IoT frontiers to the edge of the network, in order to decrease this massive sending of information to large exchanges for analysis. As a result of this trend, a new discipline has emerged: edge intelligence or edge AI, a widely recognised and promising solution that attracts with special interest to the community of researchers in artificial intelligence. We adapted edge AI to classify human emotions. Results show how edge AI-based emotion classification can greatly benefit in the field of cognitive assistants for the elderly or people living alone., This work was partly supported by the Generalitat Valenciana (PROMETEO/2018/002) and by the Spanish Government (RTI2018-095390-B-C31). Universitat Politecnica de Valencia Research Grant PAID-10-19.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Towards a Dynamic Edge AI Framework applied to autonomous driving cars

  • Muratore, G.
  • Rincón Arango, Jaime Andrés
  • Greco, G.
  • Fortino, G.
  • Julian, Vicente|||0000-0002-2743-6037
  • Carrascosa Casamayor, Carlos|||0000-0003-3649-6530
[EN] This work proposes an innovative solution in the field of Edge AI in order to efficiently exploit new hardware components available on the market at low cost. Edge AI means that algorithms are processed locally on a hardware device. The algorithms use data (sensor data or signals) that are created on the own device. The idea of this paper focuses on demonstrating the validity of the proposed solution by implementing an autonomous driving system that exploits communication between intelligent agents. In this case, our self-driving cars are equipped with a low-cost device that allows you to recognise objects along the way and consequently take actions by running a machine learning model. The presence of a machine learning model also allows the developer to modify it by extending the flexibility and application possibilities of the proposed solution., This work was partly supported by: ERASMUS+ Programme, KA1 Istruzione Superiore, Carta Erasmus+: 29388-EPP-1-2014-1-IT-EPPKA3-ECHE, ACCORDO PER LA MOBILITÀ ERASMUS PER STUDIO - a.a. 2019/2020, Progetto n o 2019-1-IT02-KA103-061203 - CUP: H25J19000080006, Generalitat Valenciana (PROMETEO/2018/002). Universitat Politecnica de Valencia Research Grant PAID-10-19.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Learning words using augmented reality

  • Juan, M. Carmen|||0000-0002-8764-1470
  • Abad Cerdá, Francisco José|||0000-0001-5896-8645
  • Lluch Crespo, Javier|||0000-0002-4317-0806
  • Llop, Edith
[EN] This paper presents an Augmented Reality (AR) game for learning words. Thirty-two children played the AR game and the equivalent real game. We have compared the results of the two games. The results indicate that children did not found significant differences between the two games except for one question, but 81% of the children liked most the AR game., We would like to thank: - This work was partially funded by: the APRENDRA project (TIN2009-14319-C02-01). The UPV project (PAID09015). - Tania Llop for her assistance in the development of the game. - Loles Marzal and Concha Carbo for their assistance in the study. - "La Encarnacion" School Centre for its collaboration and for allowing us to include these two games as activities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Theoretical model of a multi-layered polymer coated steel-strip ironing process using a neural network

  • Sellés, M.A.|||0000-0002-0784-5757
  • Sanchez-Caballero, Samuel|||0000-0001-5322-8082
  • Pérez Bernabeu, Elena|||0000-0002-9221-7623
  • Reig-Pérez, Miguel Jorge|||0000-0003-0226-1194
  • Segui Llinares, Vicente Jesús|||0000-0002-4043-2866
  • Schmid, S. R.
An alternative to the traditional can manufacturing process is to use plastic laminated rolled steels as base stocks. This material consist of pre-heated steel coils that are sandwiched between one or two sheets of polymer. The heated sheets are then immediately quenched, which yields a strong bond between the layers. Such polymer-coated steels were investigated by Jaworski [1,2] and Sellés [3], and found to be suitable for ironing with carefully controlled conditions. A novel multi-layer polymer coated steel has been developed for container applications. This material presents an interesting extension to previous research on polymer laminated steel in ironing, and offers several advantages over the previous material (Sellés [3]). This document shows a modelization for the ironing process (the most crucial step in can manufacturing) done by using a neural network. © (2012) Trans Tech Publications., This work was supported by the “Universitat Politècnica de València” [grant number PAID-06-10-003-305]
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A customizable open-source framework for measuring and equalizing e2e delays in shared video watching

  • Montagud, Mario
  • Cesar, Pablo
  • Boronat, Fernando|||0000-0001-5525-3441
[EN] Low-latency and media sync are essential requirements to enable interactive multi-party services, such as Social TV. In this work, we present an open-source and customizable framework that allows measuring end-to-end (e2e) video delays and provides support for different types of media sync, including Inter-Destination Media Sync (IDMS). This framework can be used by researchers to investigate the suitability of different techniques for optimizing the system performance in terms of e2e delays and media sync., This work has been funded, partially, by UPV under its R&D Support Program in PAID-01-10 Project and by CWI under EU/FP7 REVERIE Project (ICT-2011-7-287723).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Multi-touch-based assessment of hand mobility, dexterity and function. Preliminary study of validity, reliability and sensitivity to upper limb impairment severity in individuals with stroke.

  • Latorre, Jorge
  • Mollà-Casanova, Sara
  • Salinas, Bárbara
  • Colomer, Carolina
  • Borrego, Adrián|||0000-0001-5134-7811
  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
  • Llorens Rodríguez, Roberto|||0000-0002-8677-8707
[EN] Impairments of the upper limb function are among the most common and disabling sequelae after stroke, and their rehabilitation poses a major challenge for current physical and occupational therapy interventions. While restoration of certain degree of proximal and global movements and function is expected, the recovery of premorbid hand mobility and dexterity is less likely to occur. Although great efforts are usually made to rehabilitate these skills, with customized particular and analytic exercises, their assessment is rarely made with the same level of specificity. In general, hand and finger mobility and functionality are indirectly assessed in the clinic with standardized clinical scales and tests that require the use of these skills to perform some tasks. Although these scales are easy to administer, they can present poor accuracy, be biased, and do not allow for isolated assessment of joints and movements. Multi-touch technology enables interaction with electronic devices, such as smartphones and tablets, with on-screen finger touches. Although there is a very limited number of studies that investigate the potential of this technology to rehabilitate hand mobility and dexterity, the use of this technology for assessment of these skills remains unexplored. This study evaluates the feasibility of a multi-touch-based assessment tool (app) of hand mobility and dexterity in a sample of post-stroke survivors. Our results provide preliminary evidence that this technology can be used to design valid and reliable instruments for assessing hand mobility and dexterity that, in addition, are sensitive to the severity of the motor impairment of the upper limb after stroke, which could complement conventional clinical assessment., This study was partially funded by project VALORA, Fundació la Marató de la TV3 (grant 201701-10), grant BES-2014-068218 of the Ministerio de Economía y Competitividad of Spain, and grant Ayuda a Primeros Proyectos de Investigación (PAID-06-18), Vicerrectorado de Investigación, Innovación y Transferencia de la Universitat Politècnica de València, València, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A Novel Method to Decouple Temperature and Strain Using a Customized Femtosecond Laser-inscribed Superstructure Fiber Bragg Grating

  • Sanipatin-Urquizo, Bryan David|||0000-0003-4042-2286
  • Maldonado-Hurtado, Daniel Gustavo|||0000-0001-8585-0271
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] This paper introduces a novel technique to simultaneously measure temperature and strain using a single 5 mm femtosecond laser-inscribed superstructure FBG. Analyzing resonance distances, it allows distinguishing and complements the contributions of strain and temperature, improving measurements in sensing applications., This work is partially supported by the I+D+I projects SYNERGY PID2020-118310RB-I00 and INSTILL PID2020 120071RJ I00 funded by MCIN/AEI/10.13039/501100011033. Also, by the Generalitat Valenciana, the PROMETEO 2021/015 Research Excellency Award, the IDIFEDER/2020/032, as well as IDIFEDER/2021/050 GV A Infraestructura. D and PAID-10-22 de la Universitat Politècnica de València. Maldonado- Hurtado is supported by a scholarship PRE2018-085654, funded by MCIN/AEI/10.13039/501100011033, and ESF Investing in your future. . B. Sanipatin is supported by the Generalitat Valenciana, the PROMETEO 2021/015.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Parametrizing social performance of new and existing housing projects through Social Life Cycle Assessment

  • Quintana-Gallardo, Alberto|||0000-0002-8911-595X
[EN] In the construction industry, decisions made at the architectural design level significantly impact the life of the building's users and the surrounding society. Aspects such as the effect of the building envelope on the thermal comfort of the users, the indoor air quality, the distribution of spaces, and the choice of materials and finishes are often studied without considering the effect these decisions have on the users throughout the life of the building. These aspects are often studied theoretically and relegated to a secondary role because of the difficulty of considering them holistically and objectively. This study's objective is to create a methodology that allows us to know how decisions at the project level affect the users prior to its construction. This is achieved by adapting the Social Life Cycle Assessment (S-LCA) methodology. S-LCA is a methodology used to objectively measure human actions' effects on society and the environment. The methodology is based on developing and defining a series of indicators that allow the adaptation of the Social Life Cycle Assessment (S-LCA) methodology to the architecture and construction sector. The methodology builds on the United Nations Environmental Programme guidelines and the Level(s) Framework. The indicators are chosen to analyze the vulnerability, well-being, habitability, and comfort associated with housing. The result is a series of social indicators that will be subsequently implemented in developing a holistic methodology of Social Life Cycle Assessment in the field of architecture., The authors gratefully thank the Vicerrectorado de Investigación of the Polytechnic University of Valencia for funding the project “Parametrización de impactos sociales en vivienda: Análisis de Ciclo de Vida Social” (PAID06-23). Author AQG gratefully acknowledges receiving funding from the Spanish Ministry of Universities and the Polytechnic University of Valencia, under the “Plan de Recuperación Transformación y Resiliencia” (investment funding from the European Union Next Generation EU), according to Royal Decree 289/2021, of April 20 (BOE of 22 April 2021).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Análisis de incertidumbres en la Simulación de Rayos X utilizando MCNP5

  • Querol Vives, Andrea
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • Ródenas Diago, José|||0000-0003-3283-9188
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[ES] La caracterización del espectro primario de rayos X supone una herramienta muy útil para el Control de Calidad (QC) de los equipos de radiodiagnóstico, ya que permite una mejor estimación de la dosis recibida por el paciente, así como una mejor calidad de imagen. En este trabajo, se ha desarrollado un modelo de Monte Carlo, con el programa MCNP5, para simular espectros de rayos X a partir de una fuente de electrones y las características de un tubo de rayos X comercial. Los espectros obtenidos se han comparado con los espectros extraídos del catálogo IPEM 78 para validar el modelo de simulación de MCNP5. Además, se ha estudiado la incertidumbre asociada a los parámetros geométricos del modelo del tubo de rayos X y sus efectos en los espectros simulados utilizando la fórmula de Noether‐Wilks. Los parámetros del tubo que se han estudiado son el espesor de los colimadores, los filtros, el blindaje y el obturador de barrilete. A la vista de los resultados, se puede concluir que para los cálculos de MCNP5 la incertidumbre debida a los parámetros geométricos es más relevante que la estadística asociada al propio método., Este trabajo, ha sido parcialmente financiado por la Generalitat Valenciana dentro del proyecto de investigación GV PRE/2008/136, y la Universitat Politècnica de València dentro del proyecto PAID‐06‐07‐3300. Así como por la beca de Formación de Profesorado Universitario (FPU) del Ministerio de Educación y Ciencia, referencia AP2009‐2600.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

New matrix series expansions for the matrix cosine approximation

  • Defez Candel, Emilio|||0000-0002-3303-6371
  • Ibáñez González, Jacinto Javier|||0000-0002-6912-4453
  • Alonso Abalos, José Miguel|||0000-0001-6812-7364
  • Peinado Pinilla, Jesús|||0000-0002-9048-5106
  • Alonso-Jordá, Pedro|||0000-0002-6882-6592
This work has been partially supported by Spanish Ministerio de Economia y Competitividad and European Regional Development Fund (ERDF) grants TIN2017-89314-P and by the Programa de Apoyo a la Investigacion y Desarrollo 2018 of the Universitat Politecnica de Valencia (PAID-06-18) grants SP20180016.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Data Dependence for Object-Oriented Programs

  • Galindo, Carlos|||0000-0002-3569-6218
  • Silva, Josep|||0000-0001-5096-0008
  • Pérez-Rubio, Sergio
[EN] The System Dependence Graph (SDG) is a program representation used in several static analyses. In particular, it is the basis of program slicing, a technique that extracts the part of the program that may directly or indirectly affect the values computed at a given program point (known as the slicing criterion). Several approaches have enhanced the SDG representation to deal with object-oriented situations like inheritance, polymorphism, or dynamic bindings. Currently, the most advanced approach is the Java System Dependence Graph (JSysDG), which subsumes previous approaches and that is able to represent all those situations. In this paper, we show that even the JSysDG does not produce complete slices in all cases when some object variables are selected as the slicing criterion. To solve this limitation, we first identify the source of the problem: the representation of dependences between partial definitions of objects is insufficient in the JSysDG, leading to a loss of completeness in many cases. Then, we extend the JSysDG with the addition of a specific flow dependence for object type variables called object-flow dependence. This extension provides a more accurate flow representation between object variables and its data members and allows us to obtain complete slices when an object variable is considered as slicing criterion., This work has been partially supported by the EU (FEDER) and the Spanish MCI/AEI under grants TIN2016-76843-C4-1- R and PID2019-104735RB-C41, by the Generalitat Valenciana under grant Prometeo/2019/098 (DeepTrust), and by TAILOR, a project funded by EU Horizon 2020 research and innovation programme under GA No 952215. Sergio Pérez was partially supported by Universitat Politècnica de València under FPI grant PAID-01-18.