Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 64
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanoscale charge density and dynamics in graphene oxide

  • Palacios-Lidón, E.
  • Colchero, J.
  • Ortuño, Miguel
  • Colom, E.
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Somoza, Andrés M.
4 figures.-- Supplementary information available., Graphene oxide (GO) is widely used as a component in thin film optoelectronic device structures for practical reasons because its electronic and optical properties can be controlled. Progress critically depends on elucidating the nanoscale electronic structure of GO. However, direct experimental access is challenging because of its disordered and nonconductive character. Here, we quantitatively mapped the nanoscopic charge distribution and charge dynamics of an individual GO sheet by using Kelvin probe force microscopy (KPFM). Charge domains are identified, presenting important charge interactions below distances of 20 nm. Charge dynamics with very long relaxation times of at least several hours and a logarithmic decay of the time correlation function are in excellent agreement with Monte Carlo simulations, revealing an universal hopping transport mechanism best described by Efros–Shklovskii’s law., This research was financed by the Ministerio de Ciencia e Innovación and the Agencia Estatal de Investigación (MICINN/AEI, Spain) and associated Funds of the European Union through the projects “Nano and Meso Scales: Modelling, Structure and Characterization” (PID2019-104272RB-C52/AEI/10.13039/501100011033 and “Photoelectrochemical hydrogen production by optimized graphene-based interfaces” (PID2019-104272RB-C51/AEI/10.13039/501100011033) and the Fundación Séneca through the projects 19907/GERM/15 and 20860/PI/18, as well as the Gobierno de Aragón (Grupo Reconocido DGA-T03_20R)., E.C. acknowledges funding of his predoctoral contract by Spanish MINEICO and associated European Social Funds (BES2017-080020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Puntos de carbono poliméricos. Síntesis y desarrollo de nuevos nanomateriales de carbono fluorescentes y su implicación en la producción de hidrógeno sostenible

  • Álvarez Sánchez, Miguel Ángel
  • Martínez-Barón, Carlos
  • Hernández-Ferrer, Javier
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
Póster presentado en el XVII Simposio de Investigadores Jóvenes de la RSEQ (2021), celebrado en la Universidad de Alcalá de Henares, 23-26 noviembre., Los puntos de carbono poliméricos, pertenecientes a la familia de puntos de carbono (del inglés Carbon Dots), han despertado gran interés en los últimos años por sus excelentes propiedades de fluorescencia, que se puede modificar para que emitan en un rango variado de longitudes de onda. Esto, sumado a su bajo coste de síntesis, gran estabilidad fotoquímica, facilidad de funcionalización, baja toxicidad, elevada biocompatibilidad y solubilidad en agua, los posicionan como una potente alternativa a los puntos cuánticos convencionales, en su mayoría tóxicos por la presencia de metales pesados. Por todo ello, estos materiales resultan muy prometedores para aplicaciones en una gran variedad de campos, como son la biomedicina (diagnóstico, terapia, detección), la fotocatálisis (degradación de contaminantes) y la energía (fotovoltaica) entre otros. Los puntos poliméricos comúnmente emiten en el azul y su mecanismo de fluorescencia ha sido estudiado en profundidad. [5] Sin embargo, se han reportado pocos ejemplos de puntos poliméricos con una emisión de fluorescencia desplazada hacia el rojo. En este trabajo se presenta la producción, optimización y caracterización de puntos poliméricos solubles en agua, con fluorescencia en el verde y elevado rendimiento cuántico. Además, estos puntos poliméricos, implementados sobre un fotoánodo de óxido de titanio, han mejorado la fotoactividad del mismo para procesos de producción limpia de hidrógeno por escisión fotoelectroquímica del agua., Este trabajo ha sido financiado por MICINN/AEI con el proyecto PID2019-104272RB-C51/AEI/10.13039/50110 0 011033 y por el gobierno de Aragón, grupos reconocidos DGA-T03_20R. Agradecimientos a la DGA por la financiación del contrato predoctoral para el periodo 2019-2023., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Nanocristales de quitina: Síntesis, caracterización y aplicaciones de un nanomaterial sostenible

  • Calvo Peña, Víctor
  • Ulcuango, Matías
  • González Domínguez, José Miguel
  • Benito, Ana M.
  • Maser, Wolfgang K.
Resumen de la comunicación oral presentada en el XVII Simposio de Investigadores Jóvenes RSEQ, 23-26 noviembre 2021, celebrado en Alcalá de Henares., Los biopolímeros nanoestructurados tienen propiedades excepcionales, se extraen de fuentes naturales y tienen el potencial de sustituir plásticos de fuentes no sostenibles, como el petróleo. Estas cualidades se deben a su tamaño en la nano-escala (entre 1 y 100 nm), siendo el más investigado la nanocelulosa en sus distintas variedades. La quitina es el segundo biopolímero más abundante tras la celulosa y se encuentra en distintos seres vivos, por ejemplo, en los exoesqueletos de crustáceos y artrópodos, aportando rigidez y dureza. [3] La quitina se puede transformar en nanocristales de quitina (NCQ) a través de un proceso de hidrólisis ácida. [4] Distintas aplicaciones de los NCQ son la estabilización eficiente en agua de nanomateriales de carbono, la preparación de aerogeles o su uso como refuerzo de otros materiales. En este trabajo se presenta un método optimizado para la obtención de NCQ dispersos en agua con un rendimiento superior al 60% frente al 30% del método inicial. Se han caracterizado por diversas técnicas como difracción de rayos X, termogravimetría o microscopía de transmisión electrónica. Se ha probado también la capacidad de redispersión de los NCQ tras liofilizarlos, obteniendo una dispersión de calidad similar tras un proceso sencillo basado en ultrasonidos, lo cual no sucede con otros biopolímeros nanoestructurados, como los nanocristales de celulosa. Se ha probado el uso de estos NCQ como dispersante en tintas tanto de nanotubos de carbono de una sola capa como de nanofibras de carbono y su integración in situ y ex situ como refuerzo en xerogeles de nanocelulosa bacteriana. En definitiva, la presente comunicación demuestra el enorme potencial de los NCQ como agente dispersante, refuerzo, y aditivo sostenible para obtener desde una perspectiva verde una variedad de nanomateriales compuestos., Financiación del MICINN/AEI bajo los proyectos PID2019-104272RB-C51/AEI/10.13039/501100011033 y PID2020-120439RA-I00, y del Gobierno de Aragón (DGA, Grupo Reconocido DGA-T03_20R). Víctor C. agradece a la DGA por la financiación de su contrato predoctoral (Ref. CUS/581/2020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Graphene oxide as versatile charge-transfer interface for improved optoelectronic materials

  • Maser, Wolfgang K.
  • Benito, Ana M.
Talk delivered at the 2019 Nano Applications Workshop, 17th-18th july 2019, München (Germany)., Graphene oxide (GO) is a highly defective chemically modified form of graphene containing many different types of oxygen functional groups on its basal plane and edges. Their presence imparts hydrophilicity and allows for easy processing from water dispersions. These facts constitute the base for their use as platforms for the formation of functional hybrid optoelectronic materials, Here GO serves as highly versatile interface layer which can be employed in a controllable way to allow or block charge transfer in optoelectronic materials. 1,2,3,4, thus contributing to improved thin film device performance. In this presentation, we will focus on the interaction of GO with conjugated polymers emphasizing the dynamic charge-transfer across the interface layer in different configurations., EU Horizon 2020 Marie Sklodowska-Curie grant 642742 ("Enabling Excellence"), Spanish Ministry MINEICO (ENE2016-79282-C5-1-R and ENE2016-79282-C5-4-R), Gobierno de Aragón (Recognized Group DGA-T03-17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Fotocatalizadores de TiO2 modificados con B. Aplicación en la oxidación fotocatalítica de propeno

  • Cano Casanova, Laura
  • Amorós-Pérez, A.
  • Ansón-Casaos, Alejandro
  • Lillo-Ródenas, Maria Ángeles
  • Román Martínez, María del Carmen
1 figura.-- Resumen del trabajo presentado en la reunión SECAT 2019, Reunión Bienal de la Sociedad Española de Catálisis, celebrada del 24 al 26 de junio de 2019, en Córdoba (España)., El dióxido de titanio es muy interesante como fotocatalizador en muchas reacciones de descomposición de contaminantes, principalmente debido a su excelente capacidad oxidativa, estabilidad química, bajo precio, inocuidad y biocompatibilidad. Sin embargo, aún sería deseable mejorar su eficiencia fotocatalítica mediante la disminución de la velocidad de recombinación de los pares electrón-hueco y la ampliación del intervalo de absorción hacia el espectro visible. Una de las opciones potenciales de mejora se centra en la modificación del TiO2 con boro, que en algunos casos podría dar lugar a una disminución de la energía del límite inferior de la banda de conducción del TiO2. En el presente trabajo se estudia dicha modificación empleando ácido bórico para introducir B en la composición del TiO2 preparado mediante el método sol-gel y se investiga el efecto de la cantidad de boro introducido y la temperatura de cristalización. Estos fotocatalizadores se han probado en la oxidación fotocatalítica de propeno en fase gas., Los autores agradecen la financiación económica de los proyectos PROMETEO/2018/076 (GV/Feder), RTI2018-095291-B-I00 y ENE2016-79282-C5-1-R (Ministerio de Ciencia, Innovación y Universidades), T03-17R (Gobierno de Aragón) y VIGROB-136 (UA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Reducción de CO2 a CH4 usando materiales nanocarbonosos o monolitos recubiertos de alumina como soportes

  • Bustinza, Ainhoa
  • Roldán, Laura
  • García-Bordejé, José Enrique
1 figura.-- Resumen del póster presentado en la reunión SECAT 2019, Reunión Bienal de la Sociedad Española de Catálisis, celebrada del 24 al 26 de junio de 2019, en Córdoba (España)., Las energías renovables es una de las soluciones energéticas del futuro, debido a los riesgos medioambientales del uso de los combustibles fósiles y que sus reservas son limitadas. Sin embargo, la producción de energía a partir de fuentes renovables es intermitente, no coincidiendo normalmente la demanda y oferta ni en el tiempo, ni en el espacio. Por tanto, urge el desarrollo de soluciones para el almacenamiento y transporte de la energía renovable. Una solución es la conversión de la energía renovable en H2 mediante electrolisis. El principal problema es su almacenamiento y transporte puesto que el tiempo típico de descarga en las infraestructuras actuales es menos de 100 horas. Cuando se requiere almacenamiento por largo tiempo, una opción es la conversión de H2 con CO2 en gas natural sintético (CH4), que puede almacenarse en las actuales infraestructuras sin limitación. Además, el uso de CO2 como materia prima contribuye a cerrar el ciclo del carbono con el beneficio medioambiental que ello conlleva. La reacción de CO2 con H2 se descubrió hace más de un siglo y se conoce como reacción de Sabatier [1]. Diferentes metales de transición y nobles soportados en óxidos metálicos se han usado como soporte de catalizador en esta reacción. El uso de materiales carbonosos en esta reacción es muy escaso, incluso se ha descrito que los nanotubos de carbono (CNT) son inactivos para esta reacción, lo que se atribuye a la incapacidad de quimisorber CO2 por parte del soporte [2]. Para la aplicación industrial de esta tecnología es fundamental el diseño del reactor catalítico. La hidrogenación de CO2 para producir CH4 es altamente exotérmica (ΔHRo=-165 kJ/mol). Por tanto, es esencial una adecuada evacuación del calor generado para evitar puntos calientes que disminuyen el rendimiento a CH4 y la vida del catalizador. Para solucionarlo, se han usado diferentes tipos de reactores como lechos fluidizados, reactores multitubulares enfriados externamente o reactores en etapas con enfriamiento intermedio [3]. Más recientemente, se ha propuesto el recubrimiento de intercambiadores de calor con la fase catalíticamente activa. De manera que se integra la reacción y el enfriamiento. En este contexto, el recubrimiento catalítico de monolitos se ha propuesto como un modelo para el recubrimiento de intercambiadores de calor para la metanación de CO2 [4]. Además, los monolitos tienen baja perdida de carga lo que permitiría convertir el CO2 de gases de postcombustión, que se emiten a presión atmosférica, sin necesidad de represurizarlos. En este trabajo, hemos soportado nanopartículas de Ru en nanotubos de carbono (CNTs), nanofibras de carbono (CNFs) y nanofibras dopadas con nitrógeno (N-CNF). Los catalizadores con un 5% Ru soportados en CNF, N-CNF y CNT se han comparado a un catalizador comercial de 5% de Ru en alúmina (Ru/Al2O3). Para estudiar la relación entre la estructura y el comportamiento, los catalizadores se han caracterizado exhaustivamente por TEM y técnicas transitorias como desorción a temperatura programada (TPD) y reacción superficial a temperatura programada (TPSR). En una segunda parte, monolitos de cordierita se han recubierto con alúmina. Posteriormente, se ha utilizado como fase activa Ni, Ru y catalizadores bimetálicos de ambos optimizando la preparación del catalizador para la reacción de metanación de CO2., The authors are indebted to the funding of European Commission (FREECATS project, grant agreement No. 280658), Financial support from Spanish Ministry MINECO (project ENE2016-79282-C5-1-R), Gobierno de Aragón (Grupo Reconocido DGA T03_17R), and associated EU Regional Development Funds are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Reduced graphene oxide aerogels with tailored porosity as structured support for catalysis and electrocatalysis

  • Carrera Jiménez, Clara
  • Hernández-Ferrer, Javier
  • González Domínguez, José Miguel
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • García-Bordejé, José Enrique
1 figure.-- Abstract ot the poster presented at the NanoteC19 conference, International Conference on Carbon Nanosciene and Nanotechnology, 27th-30th august 2019, Zaragoza (Spain)., It is of fundamental and practical significance to translate the novel physical and chemical properties of individual graphene nanosheets into the macroscale by the assembly of graphene building blocks into macroscopic architectures with control over the porous structure and functionalities. 3D graphene aerogels have some interesting properties such as high specific surface area, open porous network for ion transport, flexibility, tough mechanical strength and conductive framework which lend them high potential for wide application fields such as supercapacitors, oil-water separations, sorbents, chemical reactors and solar cells [1]. One way to prepare 3D aerogels is starting from GO dispersions and its gelation under hydrothermal conditions [2]. Upon hydrothermal treatment, the functional groups of GO nanosheets are removed by reduction resulting in a decrease of hydrophilicity and loss of surface charges, which leads to the crosslinking of RGO nanosheets and ultimately to phase separation. Herein, we have varied the hydrothermal synthesis conditions (pH, time, and freezing drying methodology) to achieve a control over the orientation and size of the pores in graphene aerogels, preparing aerogels of unidirectional pores (Figure 1) [3]. Moreover, the pH of the initial solution has a profound impact on the reduction degree and morphology of the individual graphene nanoplatelets.[2] As a proof of concept, the materials have been tested as support for nanodiamonds metalfree catalyst for selective propane dehydrogenation[4] and as noble metal catalyst support for benzyl alcohol oxidation and electrocatalyst for water splitting (HER, OER) and ORR., MINECO (project ENE2016-79282-C5-1-R), Gobierno de Aragón (Grupo Reconocido DGA T03_17R), and associated EU Regional Development Funds, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

The surface chemistry of graphene oxide: Enhancing the performance of ZnO to GO photocatalysts

  • Víctor-Román, Sandra
  • García-Bordejé, José Enrique
  • González Domínguez, José Miguel
  • Ansón-Casaos, Alejandro
  • Silva, Adrián M. T.
  • Maser, Wolfgang K.
  • Benito, Ana M.
Abstract of the poster presented at the HeteroNanoCarb-2019 Conference, Advances and applications in carbon related nanomaterials: From pure to doped structures including heteroatom layers, 2019, December 09th -- 13th, Centro de Ciencias de Benasque Pedro Pascual, in Benasque (Aragon, Spain)., We demonstrate that the surface chemistry of graphene oxide Graphene oxide (GO) is of critical importance for the photocatalytic performance of semiconducting metal oxides such as TiO2 or ZnO. To this end we employ GO with distinct and well-defined oxidation degree for the preparation of ZnO-GO hybrid materials. We show that the surface chemistry of GO is key for facilitating favorable interface interactions. This results in a lowering of the alignment of energy levels at the ZnO-GO interface and enables the transfer of photo-excited electrons from ZnO to GO. The remaining positive charge at the valence band of ZnO then easily can promote oxidation reactions with the analyte and/or the solvent. In this way, GO reduces the recombination rate of the photogenerated electron-hole pair and enhances the photocatalytic activity of ZnO. We show that by solely controlling the oxidation degree of GO and by optimizing the loading fraction highly efficient ZnO-GO photocatalysts can be prepared. Most favorable conditions are achieved for intermediate oxidation degrees of GO. Optimized ZnO-GO hybrids thus reveal photocatalytic degradation of methylene blue at conversion rates of up to 80%, within times as short as 70 minutes at concentrations as low as 0.045 mg/mL, accompanied by a good recyclability behavior. The results are of general character and extendable to semiconducting metal oxides used in photocatalysis [1]., Spanish MINEICO (Project ENE2016-79282-C5-1-R, AEI/FEDER, UE and FPI Grant BES2014-068727) and Government of Aragon (DGA-T03-17R, FEDER, UE), is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Photoelectrochemistry: a tool for the study of charge transfer at interfaces with carbon nanostructured materials

  • Hernández-Ferrer, Javier
  • Istif, Emin
  • Ansón-Casaos, Alejandro
  • Santidrián, Ana
  • Víctor-Román, Sandra
  • Benito, Ana M.
  • Maser, Wolfgang K.
Work presented at the NanoteC19 conference, International Conference on Carbon Nanosciene and Nanotechnology, 27th-30th august 2019, Zaragoza (Spain)., Photoelectrochemistry of nanomaterials is commonly employed in fields related to energy and environmental applications, such as water splitting, solar cells or water remediation. It is a valuable technique for the direct evaluation of the performance for the desired application. In addition, it can be used for the study of intrinsic electronic properties of nanostructured of a great variety of semiconductor materials, such as conductive polymers or metal oxide nanoparticles. It is also a highly valuable implement to assess charge and/or energy transfer phenomena between the mentioned semiconductors and carbon nanomaterials (GO, CNTs), unveiling their role as charge acceptors/donors, blockers/transporters, sensitizers/conditioners, or even as electroactive materials for themselves, thus allowing the tuning of optoelectronic properties of composite materials. This versatility makes photoelectrochemistry a key tool in the field of carbon nanoscience and nanotechnology [1-4]., MINECO (project ENE2016-79282-C5-1-R), European Union (H2020-MSCA-ITN-2014-ETN 642742), Gobierno de Aragón (Grupo Reconocido DGA T03_17R), and associated EU Regional Development Funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Rational description and modelling of the separation of nanotubes from solid nanoparticles in centrifugation processes

  • Ciria, José Carlos
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
6 figures, 3 tables.-- Supplementary information available., Centrifugation of liquid dispersions is a typical technique being employed to separate single-walled carbon nanotubes (SWCNTs) from big aggregates and impurities. Shining light on the underlying mechanism contributes to a more efficient preparation of corresponding suspensions or inks with improved properties. In this work, we model the sedimentation process by applying fundamental equations and a mathematical algorithm for the centrifugation routine, which takes into account centrifugation parameters and the geometry of nanoparticles. The model is fed with experimental data, namely, the centrifugation mass yield, the SWCNT purity index, metal contents, and nanoparticle sizes measured for pristine, thermally-oxidized, and chemically functionalized SWCNT samples. Particle aggregation, including SWCNT bundling, and changes due to physicochemical pretreatments are taken into account. It is shown that the complete experimental data set can be quantitatively well understood in terms of the particle sedimentation coefficient. The proposed model thus provides a rational concept to optimize centrifugation protocols for the separation of mixtures containing nanoparticles of different shapes., Financial support from Spanish MICINN/AEI under project PID2019-104272RB-C51/AEI/10.13039/501100011033 and the Diputación General de Aragón under project T03_20R (Grupo Reconocido) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synthesis and processing of nanomaterials mediated by living organisms

  • Calvo Peña, Víctor
  • González Domínguez, José Miguel
  • Benito, Ana M.
  • Maser, Wolfgang K.
5 figures, 1 scheme., Green living nanofactories: Nanomaterials (NMs) and nanocomposites are typically prepared by procedures that are incompatible with green chemistry and sustainability principles. But some living entities, from single cells to higher organisms, are able to synthesize and process NMs very efficiently under milder conditions. In this Minireview, the advances and prospects of this growing trend are discussed and summarized., Nanomaterials offer exciting properties and functionalities. However, their production and processing frequently involve complex methods, cumbersome equipment, harsh conditions, and hazardous media. The capability of organisms to accomplish this using mild conditions offers a sustainable, biocompatible, and environmentally friendly alternative. Different nanomaterials such as metal nanoparticles, quantum dots, silica nanostructures, and nanocellulose are being synthesized increasingly through living entities. In addition, the bionanofabrication potential enables also the in situ processing of nanomaterials inside biomatrices with unprecedented outcomes. In this Minireview we present a critical state-of-the-art vision of current nanofabrication approaches mediated by living entities (ranging from unicellular to higher organisms), in order to expand this knowledge and scrutinize future prospects. An efficient interfacial interaction at the nanoscale by green means is within reach through this approach., Financial support from Spanish MICINN/AEI under projects PID2019-104272RB-C51/AEI/10.13039/501100011033 and PID2020-120439RA-I00, as well as from Gobierno de Aragón (DGA, Grupo Reconocido DGA-T03_20R) is acknowledged. V.C. gratefully thanks the DGA for funding his PhD contract (Ref. CUS/581/2020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Fabricación de electrodos fotoactivos para la escisión de la molécula de agua a partir de tintas basadas en nanocelulosa

  • Martínez-Barón, Carlos
  • González Domínguez, José Miguel
  • Ansón-Casaos, Alejandro
  • Hernández-Ferrer, Javier
  • Maser, Wolfgang K.
  • Benito, Ana M.
Póster presentado en la Reunión Bienal de la Sociedad Española de Catálisis - SECAT 2021, celebrada en Valencia, del 18 al 20 de octubre 2021., Financiación de MICINN y AEI (PID2019-104272RB-C51/AEI/10.13039/501100011033), y Gobierno de Aragón (Grupo Reconocido GCNN T03_20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of nanocellulose polymorphism on electrochemical analytical performance in hybrid nanocomposites with non-oxidized single-walled carbon nanotubes

  • Dortez, Silvia
  • Sierra, Tania
  • Álvarez Sánchez, Miguel Ángel
  • González Domínguez, José Miguel
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Crevillén, Agustín G.
  • Escarpa, Alberto
4 figures, 2 tables., Two cellulose nanocrystals/single-walled carbon nanotube (CNC/SW) hybrids, using two cellulose polymorphs, were evaluated as electrochemical transducers: CNC type I (CNC-I/SW) and CNC type II (CNC-II/SW). They were synthesized and fully characterized, and their analytical performance as electrochemical sensors was carefully studied. In comparison with SWCNT-based and screen-printed carbon electrodes, CNC/SW sensors showed superior electroanalytical performance in terms of sensitivity and selectivity, not only in the detection of small metabolites (uric acid, dopamine, and tyrosine) but also in the detection of complex glycoproteins (alpha-1-acid glycoprotein (AGP)). More importantly, CNC-II/SW exhibited 20 times higher sensitivity than CNC-I/SW for AGP determination, yielding a LOD of 7 mg L−1.These results demonstrate the critical role played by nanocellulose polymorphism in the electrochemical performance of CNC/SW hybrid materials, opening new directions in the electrochemical sensing of these complex molecules. In general, these high-active-surface hybrids smartly exploited the preserved non-oxidized SW conductivity with the high aqueous dispersibility of the CNC, avoiding the use of organic solvents or the incorporation of toxic surfactants during their processing, making the CNC/SW hybrids promising nanomaterials for electrochemical detection following greener approaches., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work has been financially supported by the TRANSNANOAVANSENS program from the Community of Madrid (P2018/NMT-4349), and the Spanish Ministry of Economy and Competitiveness (CTQ2017-86441-C2-1-R). Additional funding support was from Spanish MINEICO/MICINN under project with references ENE2016-79282-C5-1-R (AEI/FEDER/UE), PID2019-104272RB-C51/AEI/10.13039/501100011033, and PID2020-120439RA-I00. Funding support from Gobierno de Aragón (Grupo Reconocido T03_20R) is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Intrinsic and selective activity of functionalized carbon nanotube/nanocellulose platforms against colon cancer cells

  • González Domínguez, José Miguel
  • Grasa, Laura
  • Frontiñán-Rubio, Javier
  • Abás, Elisa
  • Domínguez Alfaro, Antonio
  • Mesonero, José Emilio
  • Criado, A.
  • Ansón-Casaos, Alejandro
13 figures, 2 tables.-- Supplementary information available., Given their large surface area and versatile chemical reactivity, single-walled carbon nanotubes (SWCNTs) are regarded as the basis of new pharmacological complexes. In this study, SWCNTs are chemically functionalized with fluorescein, folic acid, and capecitabine, a drug that is commonly used against colorectal cancer. These functionalized SWCNTs are dispersed in water by taking advantage of their synergistic interaction with type-II nanocrystalline cellulose (II-NCC), and the resulting colloidal system is tested in vitro on both normal (differentiated) and cancerous (proliferative) human colon cells (Caco-2). The functionalized SWCNT/II-NCC hybrids show a higher activity than the reference (capecitabine) against the Caco-2 cancer cell line. However, this effect appears to be intrinsically associated with the SWCNT/II-NCC complex, particularly boosted by fluorescein, as the presence of capecitabine is not required. In addition, confocal microscopy fluorescence imaging using cell cultures highlights the enormous potential of this nanohybrid platform for colon cancer theranostics., This research was funded by the regional government of Aragón, DGA (Grupos Reconocidos DGA-T03_17R, DGA-T03_20R and DGA-A20_20R), together with associated EU Regional Development Funds, and also the Spanish MINEICO through a “Juan de la Cierva Incorporación” contract, and their associated research funds (ref. IJCI-2016–27789). A.C. thanks the Xunta de Galicia for an “Atracción de Talento” research grant (no. ED431H 2020/17)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Aerogeles unidireccionales de óxido de grafeno como soporte de electrocatalizadores

  • Carrera Jiménez, Clara
  • Hernández-Ferrer, Javier
  • González Domínguez, José Miguel
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • García-Bordejé, José Enrique
Póster presentado en la 9ª Jornada de Jóvenes Investigadores de Física y Química de Aragón, celebrada en Zaragoza el 16 de diciembre de 2021., El traslado de propiedades del grafeno hacia estructuras 3-D es de gran interés para la catálisis, electrocatálisis y el almacenamiento de energía. Sin embargo, el grafeno es proclive a apilarse, perdiendo sus propiedades y disminuyendo el área superficial. Los aerogeles de grafeno pueden evitar el problema del apilamiento, logrando mantener propiedades fundamentales como un gran área superficial, gran porosidad para la difusión de moléculas grandes, flexibilidad, resistencia mecánica y conductividad eléctrica. Aquí presentamos un método sintético para producir aerogeles de óxido de grafeno reducido (rGO) controlando la porosidad y la estructura interna, para su uso como soporte de electrocatalizadores en la reacción de evolución de hidrógeno (HER)., MICINN/AEI. PID2019-104272RB-C51/AEI/10.13039/501100011033 Grupo Reconocido DGA T03_20R, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Catalytic activity of MWCNT-based inks synthetized by different methods

  • Lorca, Sebastián
  • Santos, Florencio
  • Padilla Martínez, Javier
  • Urbina, Antonio
  • González Domínguez, José Miguel
  • García-Bordejé, José Enrique
  • Álvarez Sánchez, Miguel Ángel
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Fernández Romero, Antonio J.
Abstract of the poster presented at "Current Trends in Electrochemistry", 41st Meeting of the Electrochemistry Group of the Spanish Royal Society of Chemistry and 1st French-Spanish Atelier/Workshop on Electrochemistry, Paris (July 6 - 9, 2021)., Research on new catalyst materials for the oxygen reduction reaction (ORR) is the main goal for many research groups around the world, due to its application in fuel cells and metal/air batteries. ORR mainly occurs by two pathways, in alkaline media, the direct four-electron transfer pathway from O2 to OH- or in a two-steps mechanism, where hydrogen peroxide (HO2-) is formed in the first reaction. On fuel cells and metal air batteries applications, the catalyst must be optimized to get the oxygen reduced directly to water through the 4 electrons mechanism1. Due to high price of the precious metals, new materials are tested to be used as catalyst in ORR. Among them, researchers have focused their attention mainly on metal oxides, perovskites or carbonaceous materials. In this communication, we have studied four carbonaceous-based inks synthetized by ultrasonic or hydrothermal methods2, using a rotating ring-disk electrode (RRDE) (Figure 1.A). The production of HO2- (%HO2-), transferred electrons and others parameters will be analyzed and the results will be discussed in depth. Finally, the inks were used as catalysts in the cathode of a PVA-KOH-based zinc/air batteries to replace the most widely used catalyst to date, MnO2, The authors thank the financial support from Fundación Séneca (Región de Murcia, Spain; Ref: 20985/PI/18 and 19882-GERM-15), Spanish Agencia Estatal de Investigación (PID2019-104272RB-C55/ AEI/10.13039/501100011033 and PID2019-104272RB-C51/AEI/10.13039/501100011033), and Gobierno de Aragón (DGA T03_20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Nanocristales de quitina y sus híbridos funcionales con potenciales aplicaciones en energía y sostenibilidad

  • Calvo Peña, Víctor
  • Ulcuango, Matías
  • González Domínguez, José Miguel
  • Benito, Ana M.
  • Maser, Wolfgang K.
Resumen de la comunicación oral presentada en la 9ª Jornada de Jóvenes Investigadores de Física y Química de Aragón, celebrada el 16 de diciembre de 2021 en Zaragoza., Los biopolímeros nanoestructurados tienen propiedades excepcionales, se extraen de fuentes naturales y tienen el potencial de sustituir plásticos de fuentes no sostenibles, como el petróleo. Estas cualidades se deben a su tamaño en la nano-escala (entre 1 y 100 nm), siendo el más investigado la nanocelulosa en sus distintas variedades [1,2]. La quitina es el segundo biopolímero más abundante tras la celulosa y se encuentra en distintos seres vivos, por ejemplo, en los exoesqueletos de crustáceos y artrópodos, aportando rigidez y dureza [3]. La quitina se puede transformar en nanocristales de quitina (NCQ) a través de un proceso de hidrólisis ácida [4]. Distintas aplicaciones de los NCQ son la estabilización eficiente en agua de nanomateriales de carbono, la preparación de aerogeles o su uso como refuerzo de otros materiales [5,6]. En este trabajo se presenta un método optimizado para la obtención de NCQ dispersos en agua con un rendimiento superior al 60% frente al 30% del método inicial. Se han caracterizado por diversas técnicas como difracción de rayos X, termogravimetría o microscopía de transmisión electrónica. Se ha probado también la capacidad de redispersión de los NCQ tras liofilizarlos, obteniendo una dispersión de calidad similar tras un proceso sencillo basado en ultrasonidos, lo cual no sucede con otros biopolímeros nanoestructurados, como los nanocristales de celulosa. Se ha probado el uso de NCQ como dispersante en tintas tanto de nanotubos de carbono como de nanofibras de carbono y su integración in situ y ex situ como refuerzo en xerogeles de nanocelulosa bacteriana. En definitiva, la presente comunicación demuestra el enorme potencial de NCQ como agente dispersante, refuerzo, y aditivo sostenible para obtener desde una perspectiva verde una variedad de nanomateriales compuestos., Financiación del MICINN/AEI bajo los proyectos PID2019-104272RB-C51/ AEI/10.13039/501100011033 y PID2020-120439RA-I00, y del Gobierno de Aragón (DGA, Grupo Reconocido DGA-T03_20R). Víctor C. agradece a la DGA por la financiación de su contrato predoctoral (Ref. CUS/581/2020).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Charge transfer in nanostructured composite materials: a photoelectrochemical approach

  • Hernández-Ferrer, Javier
  • Istif, Emin
  • Ansón-Casaos, Alejandro
  • Santidrián, Ana
  • Benito, Ana M.
  • Maser, Wolfgang K.
1 Figure.-- Abstract of the work presented at "Current Trends in Electrochemistry", 41st Meeting of the Electrochemisty Group of the Spanish Royal Society of Chemistry, 1st French‐Spanish Atelier/Workshop on Electrochemistry, 6 - 9 July 2021, Paris (France)., Photoelectrochemical techniques are accurate for the study of intrinsic electronic properties of a great variety of nanostructured semiconductor materials, such as conductive polymers, carbon nanomaterials (GO, CNTs, CDs) or metal oxide nanoparticles. It is also a highly valuable implement to assess charge and/or energy transfer phenomena between the mentioned semiconductors unveiling their role as charge acceptors/donors, blockers/transporters, sensitizers/conditioners, or even as photoelectroactive materials for themselves, thus allowing the tuning of optoelectronic properties of composite materials, for their future application in fields related to energy and environment, such as water splitting, electronics, solar cells or water remediation. This versatility makes photoelectrochemistry a key tool in the field of nanoscience and nanotechnology., MINECO and AEI/FEDER/UE (project ENE2016-79282-C5-1-R), European Union (H2020-MSCAITN- 2014-ETN 642742), Gobierno de Aragón (Grupo Reconocido DGA T03_17R, FEDER/UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Formamidinium halide salts as precursors of carbon nitrides

  • Ciria-Ramos, Isabel
  • Navascués, Nuria
  • Diaw-Ndiaye, Fatou
  • Furgeaud, Clarisse
  • Ansón-Casaos, Alejandro
  • Haro, Marta
  • Juárez-Pérez, Emilio J.
13 figures, 6 tables.-- Supplementary information available., Pyrolysis of formamidinium halide salts (FAI, FABr) results in a new type of amorphous carbon nitride materials with a mass fraction of 40–50% nitrogen content. Pyrolysis temperature drives final chemical composition, morphology, optical and electrical properties of the material independently of the halide precursor and identifying triazine ring, instead of typical heptazine unit, as the main building block of this material. We elaborated a temperature dependent mechanism of formation for these materials and foresee its potential value as native passivation layer in the field of perovskite solar cells., E.J.J-P acknowledges the funding support from MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR (project grants PID2019-107893RB-I00 and EIN2020-112315, respectively). M.H. acknowledges the funding support from MCIN/AEI/10.13039/501100011033 for the Ramón y Cajal fellowship (RYC-2018-025222-I) and the project PID2019-108247RA-I00. R.A. acknowledges funding from the Spanish MICINN (project grant PID2019-104739 GB-100/AEI/10.13039/501100011033). RA also acknowledge to Government of Aragon (project DGA E13-20R (FEDER, EU)) and European Union H2020 program “ESTEEM3” (823717). A.A-C acknowledges financial support from Spanish MCIN/AEI/10.13039/501100011033 under project PID2019-104272RB-C51/AEI/10.13039/501100011033 and the Diputación General de Aragón under project T03_20R (Grupo Reconocido)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Titanium dioxide electrodes for water photo-electrolysis: modelling of photoelectrochemical processes

  • Ansón-Casaos, Alejandro
  • Ciria, José Carlos
  • Martínez-Barón, Carlos
  • Benito, Ana M.
  • Maser, Wolfgang K.
1 figure.-- Abstract of the work presented at the EHEC 2022, European Hydrogen Energy Conference 18-20 May, 2022. Madrid, Spain., Solar photoelectrolysis of water is considered as a promising route towards green hydrogen production. Since its first demonstration in 1969 [1], improving the efficiency of the process remains the major challenge. Current research efforts focus on the development of improved photoelectrodes enabling higher photocurrents and larger solar-to-hydrogen conversion. Of special interest are photoactive semiconductors being used as photoanodes. Employing concepts of nanostructuring and doping combined with liquid phase technologies for constructing favorable layered configurations, metal oxides offer strategic advantages when it comes towards the use of abundant non-critical materials and sustainable fabrication of efficient large-area photoanodes. Deeper comprehension of the underlying photoelectrochemical processes provides the necessary feedback to a successful progress. In this presentation, boron-doped nanostructured TiO2 film electrodes are used as photoanode. We show that its photoelectrochemical performance can be successfully described by mathematical and physical models. This finding is of wider general interest to understand and improve the performance of nanostructured layered photoanode architectures., Financial support from Spanish MICINN/AEI under project PID2019-104272RB-C51/AEI/10.13039/ 501100011033 and the Diputación General de Aragón under project T03_20R (Grupo Reconocido) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Oxygen reduction reaction by cobalt dispersed on carbon nanostructured materials

  • Hernández-Ferrer, Javier
  • Carrera Jiménez, Clara
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • García-Bordejé, José Enrique
1 figura.-- Resumen del póster presentado en el IX International Symposium on Carbon for Catalysis, CARBOCAT, 28-30 junio 2022, Zaragoza, España., Transition metal modified carbon nanomaterials are being widely investigated as electrocatalysts for the oxygen reduction reaction, since they are promising candidates for the replacement of precious metal catalysts in fuel cells, as well as other applications. These materials possess a high versatility; depending on the preparation conditions, and subsequently, the structure and electronic environment of the supported cobalt (single site, nanoparticulate), high activities and selectivities may be achieved for both the four-electron and two-electron pathways. The nature of carbon support is also known to be of crucial importance in these materials [1]. Heteroatom inclusion (N-doping) and the porosity of the material are some of the key parameters than can be explored, and tailored towards the desired application. In this work, Multi-walled carbon nanotubes (MWCNTs, Nanocyl), electrochemically synthesized nitrogen-doped graphene quantum dots (NGQDs), and graphene aerogels (GA) were used as support for cobalt electrocatalysts., Ministerio de Ciencia e Innovación (PID2019-104272RB-C51/AEI/10.13039/501100011033 project), and Gobierno de Aragón (Grupo Reconocido T03_20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Photoelectrocatalytic water splitting on carbon dot/titania electrodes with methanol oxidation

  • Ansón-Casaos, Alejandro
  • Hernández Ferrer, Mariano
  • Lira-Cantú, Mónica
  • Benito, Ana M.
  • Maser, Wolfgang K.
1 figure, 2 tables.-- Abstract of the poster presented at the 9th International Symposium on Carbon for Catalysis, IX CarboCat, 28th-30th June, Zaragoza, Spain., Short-chain alcohols such as methanol (MeOH) work well as hole scavengers in the photocatalytic water splitting on TiO2. Besides, MeOH is widely studied as a model pollutant in water. Both ideas are often combined to achieve efficient water purification processes with the simultaneous production of hydrogen. In this communication, we present a photoelectrochemical study on carbon dot (CD)/TiO2 electrodes., Financial support from Spanish MICINN/AEI under project PID2019-104272RB-C51/AEI/ 10.13039/501100011033 and the Diputación General de Aragón under project T03_20R (Grupo Reconocido) is acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Surface-enriched boron-doped TiO2 nanoparticles as photocatalysts for propene oxidation

  • Cano Casanova, Laura
  • Ansón-Casaos, Alejandro
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Garro, Núria
  • Lillo-Ródenas, Maria Ángeles
  • Román Martínez, María del Carmen
2 schemes, 8 figures.-- Supplementary information available., A series of nanostructured boron-TiO2 photocatalysts (B-X-TiO2-T) were prepared by sol–gel synthesis using titanium tetraisopropoxide and boric acid. The effects of the synthesis variables, boric acid amount (X) and crystallization temperature (T), on structural and electronic properties and on the photocatalytic performance for propene oxidation, are studied. This reaction accounts for the remediation of pollution caused by volatile organic compounds, and it is carried out at low concentrations, a case in which efficient removal techniques are difficult and costly to implement. The presence of boric acid during the TiO2 synthesis hinders the development of rutile without affecting the textural properties. X-ray photoelectron spectroscopy analysis reveals the interstitial incorporation of boron into the surface lattice of the TiO2 nanostructure, while segregation of B2O3 occurs in samples with high boron loading, also confirmed by X-ray diffraction. The best-performing photocatalysts are those with the lowest boron loading. Their high activity, outperforming the equivalent sample without boron, can be attributed to a high anatase and surface hydroxyl group content and efficient photo-charge separation (photoelectrochemical characterization, PEC), which can explain the suppression of visible photoluminescence (PL). Crystallization at 450 °C renders the most active sample, likely due to the development of a pure anatase structure with a large surface boron enrichment. A shift in the wavelength-dependent activity profile (PEC data) and the lowest electron–hole recombination rate (PL data) are also observed for this sample., The authors thank funding to the Spanish Ministry of Science, Innovation and Universities and FEDER, project of reference RTI2018-095291-B-I00, GV/FEDER (PROMETEO/2018/076), and University of Alicante (VIGROB-136) for financial support. Financial support from Spanish MICINN/AEI under projects PID2019-104272RB-C51/AEI/10.13039/501100011033 and PID2019-104272RB-C53/AEI/10.13039/501100011033 and the Diputación General de Aragón under project T03_20R (Grupo Reconocido) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Explosive percolation yields highly-conductive polymer nanocomposites

  • Meloni, Manuela
  • Large, Matthew J.
  • González Domínguez, José Miguel
  • Víctor-Román, Sandra
  • Fratta, Giuseppe
  • Istif, Emin
  • Tomes, Oliver
  • Savage, Jonathan P.
  • Ewels, Christopher P.
  • Peláez-Fernández, Mario
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • King, Alice A. K.
  • Ogilvie, Sean P.
  • Dalton, Alan B.
4 figures.-- The processed data used in this study are available in the Sussex Figshare database under https://doi.org/10.25377/sussex.21388851. Unprocessed data were available upon request from the corresponding author.-- Supplementary information available., Explosive percolation is an experimentally-elusive phenomenon where network connectivity coincides with onset of an additional modification of the system; materials with correlated localisation of percolating particles and emergent conductive paths can realise sharp transitions and high conductivities characteristic of the explosively-grown network. Nanocomposites present a structurally- and chemically-varied playground to realise explosive percolation in practically-applicable systems but this is yet to be exploited by design. Herein, we demonstrate composites of graphene oxide and synthetic polymer latex which form segregated networks, leading to low percolation threshold and localisation of conductive pathways. In situ reduction of the graphene oxide at temperatures of <150 °C drives chemical modification of the polymer matrix to produce species with phenolic groups, which are known crosslinking agents. This leads to conductivities exceeding those of dense-packed networks of reduced graphene oxide, illustrating the potential of explosive percolation by design to realise low-loading composites with dramatically-enhanced electrical transport properties., This work was funded by the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 642742. A.B.D. acknowledges EPSRC Capital Award EP/S018069/1. W.K.M. and A.B. acknowledge support from Spanish MCIN/AEI under project PID2019-104272RB-C51/AEI/10.13039/501100011033 and the Government of Aragon (DGA) under project “Grupos Consolidados” T03-20R., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Analysis of the performance of a passive hybrid powerplant to power a lightweight unmanned aerial vehicle for a high altitude mission

  • Renau, Jordi
  • Sánchez, Fernando
  • Lozano, Antonio
  • Barroso, Jorge
  • Barreras, Félix
The objective of this research is to analyze the performance of a passive hybrid powerplant control system to be implemented in a lightweight unmanned aerial vehicle capable to ascend up to the high troposphere (10, 000 m). The powerplant is based on a high-temperature PEM fuel cell connected in parallel to a set of lithium-polymer batteries and regulated by two power diodes. Test performed in steady state demonstrates that the use of the hybrid system increases the efficiency of the stack by more than 7% because the voltage at the main DC bus is limited by the batteries. The robustness of the passive control system is proved in a long-term test in which random perturbations of ±15% are applied to the average power that would be demanded during the ascent flight. The hybridization of the stack with the batteries eliminates sudden peaks in the current generated by the stack, which are responsible for prompt degradation phenomena that drastically reduce its useful lifetime. The study demonstrates that with the passive hybrid powerplant it is possible to reach the target height with the gas storage system considered in the application, contrary to what happens with the simple power plant.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Design and manufacture of a high-temperature PEMFC and its cooling system to power a lightweight UAV for a high altitude mission

  • Renau, J.
  • Barroso, J.
  • Lozano, A.
  • Nueno, A.
  • Sánchez, F.
  • Martín, J.
  • Barreras, F.
In the present study, the optimal design of a high-temperature proton exchange membrane fuel cell (HT-PEMFC) that will be used to power an unmanned aerial vehicle (UAV) in a high altitude mission is performed. The use of PEMFCs for service ceiling above 10 km implies overcoming a number of problems caused by the harsh environmental conditions. Among them, new strategies to manage the heat generated by electrochemical reactions are needed. The maximum power required by the UAV was determined solving the aerodynamic problem, and the design of the lightweight HT-PEMFC, including its cooling system, was optimized. To perform the numerical solution of the heat transfer problem, a computational code was implemented using the EES software. The decisions adopted resulted in a 40-cells stack with an electric power above 1 kW and a weight around 3.65 kg. Besides, it is demonstrated that, for the configuration considered in the study, a passive cooling system without any additional fan system can be used to maintain the stack temperature in 160 °C.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Chemical postdeposition treatments to improve the adhesion of carbon nanotube films on plastic substrates

  • Santidrián, A.
  • Sanahuja, O.
  • Villacampa, B.
  • Diez, J.L.
  • Benito, Ana M.
  • Maser, W.K.
  • Muñoz, E.
  • Ansón Casaos, A.
The robust adhesion of single-walled carbon nanotubes (SWCNTs) to plastic substrates is a key issue toward their use in flexible electronic devices. In this work, semitransparent SWCNT films were prepared by spray-coating on two different plastic substrates, specifically poly(ethylene terephthalate) and poly(vinylidene fluoride). The deposited SWCNT films were treated by dipping in suitable solvents separately, namely, 53% nitric acid (HNO3) and N-methyl pyrrolidone. Direct evidence of SWCNT adhesion to the substrate was obtained by a peel-off test carried out with an adhesive tape. Moreover, these treatments caused enhanced film transparency and electrical conductivity. Electron microscopy images suggested that SWCNTs were embedded in the plastic substrates, forming a thin layer of conductive composite materials. Raman spectroscopy detected a certain level of doping in the SWCNTs after the chemical treatments, which particularly affected metallic nanotubes in the case of the HNO3 treatment. The microscopic adhesion and hardness of the SWCNT films were studied through a nanoscratch test. Overall, the efficiency of selected chemical postdeposition treatments for improving the SWCNT adhesion and the robustness of the resulting SWCNT films are demonstrated on flexible substrates of different chemical compositions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Combined production of electricity and hydrogen from solar energy and its use in the wine sector

  • Carroquino, J.
  • Roda, V.
  • Mustata, R.
  • Yago, J.
  • Valiño, L.
  • Lozano, A.
  • Barreras, F.
In the present research, the energy demanded by the wastewater treatment plant of a winery and the pumping station of the irrigation system of a vineyard is supplied by a stand-alone renewable energy system formed by three photovoltaic arrays connected to a microgrid. A relatively small battery maintains the stability and quality of the energy supply acting as a short-term energy storage. Hydrogen is generated in a production and refueling plant specifically designed for this project, and it is eventually used in a plug-in BEV properly modified as a hybrid vehicle by adding a PEM fuel cell. On the one hand, the technical and economic feasibility of the on-site electricity production for the winery and vineyard, compared to the commercial electricity from the grid and diesel gensets, is demonstrated. On the other hand, the diesel savings by the hydrogen generated on site are assessed. The electricity (72 MWh) and hydrogen (1214 m3) produced in the first year have saved the emission of around 27 tons of equivalent CO2.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Tribological and mechanical properties of graphene nanoplatelet/PEEK composites

  • Puértolas, J.A.
  • Castro, M.
  • Morris, J.A.
  • Ríos, R.
  • Ansón-Casaos, A.
Poly(ether ether ketone) (PEEK) is a relevant thermoplastic in industry and in the biomedical sector. In this work, the lubricant capability of graphene nanoplatelets (GNPs) is used for improving the PEEK wear properties. Nanocomposites were prepared by solvent-free melt-blending and injection molding at various compositions between 1 and 10 wt. % of GNPs. The Raman G band shows a progressive increment proportional to the bulk GNP percentage. From calorimetric data, the polymer matrix structure is interpreted in terms of a 3-phase model, in which the crystalline phase fluctuates from 39 to 34% upon GNP addition. Thermal conductivity varies in accordance with the polymer crystallinity. Tensile and flexural tests show a progressive increase in the modulus, as well as a decrease in the fracture strength and the work of fracture. Most important, the composite surface undergoes a substantial improvement in hardness (60%), together with a decrease in the coefficient of friction (-38%) and a great reduction in the wear factor (-83%). Abrasion and fatigue wear mechanisms are predominant at the lowest and highest GNP concentrations respectively. In conclusion, GNPs are used without any chemical functionalization as the filler in PEEK-based materials, improving the surface hardness and the tribological properties.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Photoactivity improvement of TiO2 electrodes by thin hole transport layers of reduced graphene oxide

  • Hernández-Ferrer, J.
  • Ansón-Casaos, A.
  • Víctor-Román, S.
  • Sanahuja-Parejo, O.
  • Martínez, M.T.
  • Villacampa, B.
  • Benito, A.M.
  • Maser, W.K.
Nanostructured TiO2 and graphene-based materials constitute components of actual interest in devices related to solar energy conversion and storage. In this work, we show that a thin layer of electrochemically reduced graphene oxide (ECrGO), covering nanostructured TiO2 photoelectrodes, can significantly improve the photoactivity. In order to understand the working principle, ECrGO/TiO2 photoelectrodes with different ECrGO thicknesses were prepared and studied by a set of photoelectrochemical measurements. Methanol in alkaline conditions was employed as effective hole acceptor probe to elucidate the electronic phenomena in the electrode layers and interfaces. These studies underline the hole accepting properties of ECrGO and reveal the formation of a p-n junction at the interface between ECrGO and TiO2. It is shown for the first time that the resulting space charge region of about 10 nm defines the operational functionality of the ECrGO layer. Films thinner than the space charge region act as hole transport layer (HTL), which efficiently transfers holes to the liquid interface thus leading to enhanced photoactivity. Thicker films however act as hole blocking layer (HBL), resulting in a systematic decrease of the photoactivity. The finding of a thickness dependent threshold value for the operation of ECrGO as HTL and HBL is of general interest for the fabrication of optoelectronic devices with improved performance.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Interfacing Transition Metal Dichalcogenides with Carbon Nanodots for Managing Photoinduced Energy and Charge-Transfer Processes

  • Vallan, L.
  • Canton-Vitoria, R.
  • Gobeze, H.B.
  • Jang, Y.
  • Arenal, R.
  • Benito, A.M.
  • Maser, W.K.
  • D''Souza, F.
  • Tagmatarchis, N.
Exfoliated semiconducting MoS2 and WS2 were covalently functionalized with 1, 2-dithiolane-modified carbon nanodots (CNDs). The newly synthesized CND-MoS2 and CND-WS2 hybrids were characterized by spectroscopic, thermal, and electron microscopy imaging methods. Based on electronic absorption and fluorescence emission spectroscopy, modulation of the optoelectronic properties of TMDs by interfacing with CNDs was accomplished. Electrochemical studies revealed facile oxidation of MoS2 over WS2 in the examined hybrids, suggesting it to be better electron donor. Excited state events, investigated by femtosecond transient absorption spectroscopic studies, revealed ultrafast energy transfer from photoexcited CNDs to both MoS2 and WS2. Interestingly, upon MoS2 photoexcitation, charge transfer from an exciton dissociation path of MoS2 to CNDs, within CND-MoS2, was observed. However, such a process in CND-WS2 was found to be absent due to energetic reasons. The present study highlights the importance of TMD-derived donor-acceptor hybrids in light energy harvesting and optoelectronic applications. Furthermore, the fundamental information obtained from the current results will benefit design strategies and impact the additional TMD-based hybrid materials to efficiently manage and perform in electron-transfer processes. development of additional TMD-based hybrid materials to efficiently manage and perform in electron-transfer processes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Laser-Deposited Carbon Aerogel Derived from Graphene Oxide Enables NO2-Selective Parts-per-Billion Sensing

  • Nufer, S.
  • Lynch, P.J.
  • Large, M.J.
  • Ogilvie, S.P.
  • Salvage, J.P.
  • Pelaez-Fernandez, M.
  • Waters, T.
  • Jurewicz, I.
  • Muñoz, E.
  • Arenal, R.
  • Benito, A.M.
  • Maser, W.K.
  • Tagmatarchis, N.
  • Ewels, C.P.
  • Brunton, A.
  • Dalton, A.B.
Laser-deposited carbon aerogel is a low-density porous network of carbon clusters synthesized using a laser process. A one-step synthesis, involving deposition and annealing, results in the formation of a thin porous conductive film which can be applied as a chemiresistor. This material is sensitive to NO2 compared to ammonia and other volatile organic compounds and is able to detect ultra-low concentrations down to at least 10 parts-per-billion. The sensing mechanism, based on the solubility of NO2 in the water layer adsorbed on the aerogel, increases the usability of the sensor in practically relevant ambient environments. A heating step, achieved in tandem with a microheater, allows the recovery to the baseline, making it operable in real world environments. This, in combination with its low cost and scalable production, makes it promising for Internet-of-Things air quality monitoring.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Nanoscale Charge Density and Dynamics in Graphene Oxide

  • Palacios-Lidón, E.
  • Colchero, J.
  • Ortuno, M.
  • Colom, E.
  • Benito, A.M.
  • Maser, W.K.
  • Somoza, A.M.
Graphene oxide (GO) is widely used as a component in thin film optoelectronic device structures for practical reasons because its electronic and optical properties can be controlled. Progress critically depends on elucidating the nanoscale electronic structure of GO. However, direct experimental access is challenging because of its disordered and nonconductive character. Here, we quantitatively mapped the nanoscopic charge distribution and charge dynamics of an individual GO sheet by using Kelvin probe force microscopy (KPFM). Charge domains are identified, presenting important charge interactions below distances of 20 nm. Charge dynamics with very long relaxation times of at least several hours and a logarithmic decay of the time correlation function are in excellent agreement with Monte Carlo simulations, revealing an universal hopping transport mechanism best described by Efros-Shklovskii''s law. © 2021 The Authors. Published by American Chemical Society.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Intrinsic and selective activity of functionalized carbon nanotube/nanocellulose platforms against colon cancer cells

  • González-Domínguez, J. M.
  • Grasa, L.
  • Frontiñán-Rubio, J.
  • Abás, E.
  • Domínguez-Alfaro, A.
  • Mesonero, J. E.
  • Criado, A.
  • Ansón-Casaos, A.
Given their large surface area and versatile chemical reactivity, single-walled carbon nanotubes (SWCNTs) are regarded as the basis of new pharmacological complexes. In this study, SWCNTs are chemically functionalized with fluorescein, folic acid, and capecitabine, a drug that is commonly used against colorectal cancer. These functionalized SWCNTs are dispersed in water by taking advantage of their synergistic interaction with type-II nanocrystalline cellulose (II-NCC), and the resulting colloidal system is tested in vitro on both normal (differentiated) and cancerous (proliferative) human colon cells (Caco-2). The functionalized SWCNT/II-NCC hybrids show a higher activity than the reference (capecitabine) against the Caco-2 cancer cell line. However, this effect appears to be intrinsically associated with the SWCNT/II-NCC complex, particularly boosted by fluorescein, as the presence of capecitabine is not required. In addition, confocal microscopy fluorescence imaging using cell cultures highlights the enormous potential of this nanohybrid platform for colon cancer theranostics. © 2022 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Unique properties and behavior of nonmercerized type-ii cellulose nanocrystals as carbon nanotube biocompatible dispersants

  • Gonzalez-Dominguez, José Miguel
  • Anson-Casaos, Alejandro
  • Grasa, Laura
  • Abenia, Luis
  • Salvador, Alba
  • Colom, Eduardo
  • Mesonero, José E.
  • Garcia-Bordeje, J.Enrique
  • Benito, Ana M.
  • Maser, Wolfgang K.
Nanocellulose is increasingly being investigated as a paradigm of a sustainable nanomaterial because of its extraordinary physical and chemical properties, together with its renewable nature and worldwide abundance. The rich structural diversity of cellulose materials is represented by different crystalline allomorphs, from which types I and II stand out. While type I is naturally and ubiquitously present, type II is man-made and requires harsh and caustic synthesis conditions such as the so-called mercerization process. Here, we provide an optimal scenario to obtain either type-I or II nanocrystalline cellulose (NCC) by a mercerization-free method consisting only of the acid hydrolysis commonly used to produce nanocellulose from microcellulose. The possibility of having nonmercerized type-II NCC acquires a great relevance since this nanostructure shows particularly appealing properties. Moreover, an entangled and wrapped system arises when used as a dispersing agent for single-walled carbon nanotubes (SWCNTs), significantly different from that of type I. The biological testing of each NCC type and their respective SWCNT-NCC dispersions in human intestinal (Caco-2) cells reveals a general innocuous behavior in both cancer and normal stages of differentiation; however, the type-II-based SWCNT-NCC dispersions display cytotoxicity for cancer cells while enhancing mitochondrial metabolism of normal cells.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Carbon nanotube film electrodes with acrylic additives: Blocking electrochemical charge transfer reactions

  • Ansón Casados, A.
  • Sanahuja Parejo, O.
  • Hernández Ferrer, J.
  • Benito, Ana M.
  • Wolfgang K., Maser
Carbon nanotubes (CNTs) processed into conductive films by liquid phase deposition technologies reveal increasing interest as electrode components in electrochemical device platforms for sensing and energy storage applications. In this work we show that the addition of acrylic latex to water-based CNT inks not only favors the fabrication of stable and robust flexible electrodes on plastic substrates but, moreover, sensitively enables the control of their electrical and electrochemical transport properties. Importantly, within a given concentration range, the acrylic additive in the films, being used as working electrodes, effectively blocks undesired faradaic transfer reactions across the electrode–electrolyte interface while maintaining their capacitance response as probed in a three-electrode electrochemical device configuration. Our results suggest a valuable strategy to enhance the chemical stability of CNT film electrodes and to suppress non-specific parasitic electrochemical reactions of relevance to electroanalytical and energy storage applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

The viscosity of dilute carbon nanotube (1D) and graphene oxide (2D) nanofluids

  • Ansón-Casaos, A.
  • Ciria, J.C.
  • Sanahuja-Parejo, O.
  • Víctor-Román, Sandra
  • González-Domínguez, J.M.
  • García-Bordejé, E.
  • Benito, Ana M.
  • Maser, W.K.
Controlling the physicochemical properties of nanoparticles in fluids directly impacts on their liquid phase processing and applications in nanofluidics, thermal engineering, biomedicine and printed electronics. In this work, the temperature dependent viscosity of various aqueous nanofluids containing carbon nanotubes (CNTs) or graphene oxide (GO), i.e. 1D and 2D nanoparticles with extreme aspect ratios, is analyzed by empirical and predictive physical models. The focus is to understand how the nanoparticle shape, concentration, motion degrees and surface chemistry affect the viscosity of diluted dispersions. To this end, experimental results from capillary viscosimeters are first examined in terms of the energy of viscous flow and the maximum packing fraction applying the Maron–Pierce model. Next, a comparison of the experimental data with predictive physical models is carried out in terms of nanoparticle characteristics that affect the viscosity of the fluid, mostly their aspect ratio. The analysis of intrinsic viscosity data leads to a general understanding of motion modes for carbon nanoparticles, including those with extreme aspect ratios, in a flowing liquid. The resulting universal curve might be extended to the prediction of the viscosity for any kind of 1D and 2D nanoparticles in dilute suspensions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Explosive percolation yields highly-conductive polymer nanocomposites

  • Meloni, M.
  • Large, M. J.
  • González Domínguez, J. M.
  • Victor-Román, S.
  • Fratta, G.
  • Istif, E.
  • Tomes, O.
  • Salvage, J. P.
  • Ewels, C. P.
  • Peláez-Fernandez, M.
  • Arenal, R.
  • Benito, A.
  • Maser, W. K.
  • King, A. A. K.
  • Ajayan, P. M.
  • Ogilvie, S. P.
  • Dalton, A. B.
Explosive percolation is an experimentally-elusive phenomenon where network connectivity coincides with onset of an additional modification of the system; materials with correlated localisation of percolating particles and emergent conductive paths can realise sharp transitions and high conductivities characteristic of the explosively-grown network. Nanocomposites present a structurally- and chemically-varied playground to realise explosive percolation in practically-applicable systems but this is yet to be exploited by design. Herein, we demonstrate composites of graphene oxide and synthetic polymer latex which form segregated networks, leading to low percolation threshold and localisation of conductive pathways. In situ reduction of the graphene oxide at temperatures of <150 °C drives chemical modification of the polymer matrix to produce species with phenolic groups, which are known crosslinking agents. This leads to conductivities exceeding those of dense-packed networks of reduced graphene oxide, illustrating the potential of explosive percolation by design to realise low-loading composites with dramatically-enhanced electrical transport properties.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Stability of a pyrimidine-based dye-sensitized TiO2 photoanode in sacrificial electrolytes

  • Ansón-Casaos, A.
  • Martínez-Barón, C.
  • Angoy-Benabarre, S.
  • Hernández-Ferrer, J.
  • Benito, A.M.
  • Maser, W.K.
  • Blesa, M.J.
Dye sensitization of semiconductor metal oxides aims to extend the light absorption range into the visible region, of particular interest for their use as photoanodes in photoelectrochemical (PEC) water splitting. Organic dyes, however, suffer from limited chemical stability when they are exposed to constant potential and irradiation in aqueous media. Thus, in this work, we evaluate a novel metal-free donor-π-acceptor (D-π-A) dye (AT-Pyri), demonstrating significant sensitization of film photoanodes based on TiO2 nanoparticles. Among a series of tested sacrificial agents, the addition of triethanolamine (TEOA) to the sodium sulphate electrolyte prevents the degradation of AT-Pyri even after several hours of operation. Combining two sacrificial agents (methanol and TEOA) results in a synergetic improvement of the PEC water-splitting activity. Notably, the stabilization of the AT-Pyri photoanode is accompanied by a substantial increase in the photocurrent over the reference TiO2 photoanode, while the associated spikes in transient photocurrent measurements disappear.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Graphene oxide: key to efficient charge extraction and suppression of polaronic transport in hybrids with poly (3-hexylthiophene) nanoparticles

  • Colom, E.
  • Hernández-Ferrer, J.
  • Galán-González, A.
  • Ansón-Casaos, A.
  • Navarro-Rodríguez, M.
  • Palacios-Lidón, E.
  • Colchero, J.
  • Padilla, J.
  • Urbina, A.
  • Arenal, R.
  • Benito, A.M.
  • Maser, W.K.
Nanoparticles (NPs) of conjugated polymers in intimate contact with sheets of graphene oxide (GO) constitute a promising class of water-dispersible nanohybrid materials of increased interest for the design of sustainable and improved optoelectronic thin-film devices, revealing properties exclusively pre-established upon their liquid-phase synthesis. In this context, we report for the first time the preparation of a P3HTNPs–GO nanohybrid employing a miniemulsion synthesis approach, whereby GO sheets dispersed in the aqueous phase serve as a surfactant. We show that this process uniquely favors a quinoid-like conformation of the P3HT chains of the resulting NPs well located onto individual GO sheets. The accompanied change in the electronic behavior of these P3HTNPs, consistently confirmed by the photoluminescence and Raman response of the hybrid in the liquid and solid states, respectively, as well as by the properties of the surface potential of isolated individual P3HTNPs–GO nano-objects, facilitates unprecedented charge transfer interactions between the two constituents. While the electrochemical performance of nanohybrid films is featured by fast charge transfer processes, compared to those taking place in pure P3HTNPs films, the loss of electrochromic effects in P3HTNPs–GO films additionally indicates the unusual suppression of polaronic charge transport processes typically encountered in P3HT. Thus, the established interface interactions in the P3HTNPs–GO hybrid enable a direct and highly efficient charge extraction channel via GO sheets. These findings are of relevance for the sustainable design of novel high-performance optoelectronic device structures based on water-dispersible conjugated polymer nanoparticles.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Improved O2-assisted styrene synthesis by double-function purification of SWCNT catalyst

  • Mercadal, Juan J.
  • Mayoral, Alvaro
  • Fierro, José Luis G.
  • García-Bordejé, Enrique
  • Melián-Cabrera, Ignacio
The catalytic performance of SWCNT was notably improved in the oxidative dehydrogenation of ethylbenzene (EB) to styrene (ST) upon a double-function purification in one step of the raw SWCNT. This consists of lowering the MeOx concentration and generating surface C=O groups after processing it in nitric acid at controlled conditions, while preserving the structure. The textural improvement was ascribed to the cutting of the tubes/bundles by oxidation and to MeOx removal itself (dilution effect). Both EB conversion and ST selectivity increased with a parallel lowering of the undesired COx selectivity. The conversion was interpreted by the enhancement of the intrinsic properties (i.e., more surface ketonic groups) but also to the higher load of SWCNT in the bed upon purification; both factors contribute to a higher number of active sites (C=O) in the bed for styrene formation. The most purified catalyst underperformed in conversion once the purification altered the SWCNT structure notably. Thus, preserving the structure is an important condition to achieve high conversion and yield. The better selectivity was explained in two ways; more styrene-forming sites (C=O) or less COx-forming sites (uncoated MeOx) in the bed, or both. The styrene yield per catalyst volume was improved by an average of ca. 240 % in comparison to the non-purified SWCNT. Deactivation is critical in maximizing the purification effect on the intrinsic and volumetric yields. In practical terms, the purification method proved to enhance the reaction; the selectivity towards the unwanted COx was significantly lowered with a gain towards styrene, achieving comparable selectivity values as in the conventional process, but operated at much lower temperature.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Modelling TiO2 photoanodes for PEC water splitting: Decoupling the influence of intrinsic material properties and film thickness

  • Ansón-Casaos, A.
  • Ciria, J.C.
  • Martínez Barón, C.
  • Villacampa, B.
  • Benito, A.M.
  • Maser, W.K.
Semiconductor metal oxides are intensively studied in electrodes for photoelectrochemical (PEC) water splitting. On a series of nanoparticulate TiO2 photoanodes, we analyze specific fabrication variables by means of data fitting. First, the experimental outcome is gathered using PEC characterization techniques, mostly cyclic voltammetry and transient photocurrent measurements. Subsequently, we apply models to gain insights into the involved charge trapping and transfer phenomena. We find that capacitance coefficients and the switch-on transient kinetics depend on the TiO2 layer thickness, respectively indicating surface mechanisms and stationary regimes that are mediated by light accessibility. On the contrary, exponential factors of capacitance are independent of thickness, but reflect changes in the density of electron states with different sintering atmospheres. Also, the transfer resistance in the electrolyte side is indirectly influenced by sintering. Through meticulous quantitative analysis of trends, we stablish simple mathematical relationships that connect thickness-dependent parameters. This knowledge delves into fundamental mechanisms governing the TiO2 photoelectrode behaviour, and aims to facilitate further improvements in the efficiency of materials and electrodes for green hydrogen production.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Oil-in-Water Pickering Emulsions Stabilized with Nanostructured Biopolymers: A Venue for Templating Bacterial Cellulose

  • Calvo, Víctor
  • Fuentes, Laura
  • Berdejo, Daniel
  • González-Domínguez, José M.
  • Maser, Wolfgang K.
  • Benito, Ana M.
Pickering emulsions (PEs) differ from conventional emulsions in the use of solid colloidal particles as stabilizing agents instead of traditional amphiphilic molecules. Nanostructured biopolymers (NBs) emerge as a promising alternative for PE stabilization owing to their remarkable biocompatibility, abundant availability, and low cost. To explore this potential, a study is herein presented, in which cellulose nanocrystals (CNCs), both type I and type II allomorphs, and chitin nanocrystals (ChNCs) were used for stabilizing oil-in-water PEs prepared by the use of ultrasound. Sunflower oil was selected as the oil phase as it offers the advantages of being edible, renewable, and inexpensive. By utilizing ζ-potential, static light diffraction, and visual observations, we determined the optimal oil/water ratio for each type of NB to obtain stable emulsions after 14 days. The optimized PEs were used to form bacterial nanocellulose composites through emulsion templating. To our knowledge, this study represents a pioneering work in exploiting oil-in-water PEs for this approach. Additionally, it entails the first utilization of nonmercerized type II CNCs as stabilizers for PEs, while also establishing a direct comparison among the most relevant NBs. The resulting composites exhibited a unique morphology, composed of larger pores compared to standard bacterial nanocellulose aerogels. These findings highlight the notable potential of NBs as stabilizers for PEs and their ability to generate green nanocomposites with tailored properties.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Formamidinium halide salts as precursors of carbon nitrides

  • Ciria-Ramos, Isabel
  • Navascués, Nuria
  • Diaw, Fatou
  • Furgeaud, Clarisse
  • Arenal, Raúl
  • Ansón-Casaos, Alejandro
  • Haro, Marta
  • Juarez-Perez, Emilio J.
Pyrolysis of formamidinium halide salts (FAI, FABr) results in a new type of amorphous carbon nitride materials with a mass fraction of 40–50% nitrogen content. Pyrolysis temperature drives final chemical composition, morphology, optical and electrical properties of the material independently of the halide precursor and identifying triazine ring, instead of typical heptazine unit, as the main building block of this material. We elaborated a temperature dependent mechanism of formation for these materials and foresee its potential value as native passivation layer in the field of perovskite solar cells. © 2022 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Towards sustainable TiO2 photoelectrodes based on cellulose nanocrystals as a processing adjuvant

  • Martínez-Barón, C.
  • Calvo, V.
  • Hernández-Ferrer, J.
  • Villacampa, B.
  • Ansón-Casaos, A.
  • González-Domínguez, J. M.
  • Maser, W. K.
  • Benito, A. M.
Photoelectrodes of TiO2 in the form of films are commonly fabricated using screen printing techniques, employing viscous commercial TiO2 pastes. However, these pastes comprise environmentally unfriendly, multicomponent formulations designed to manufacture the photoactive TiO2 nanoparticles. To strive for sustainable processing and pave the way for the use of liquid-phase film processing technologies, the inherent limited water dispersibility of TiO2 nanoparticles must be overcome. In this study, we show that cellulose nanocrystals, produced via an environmentally benign one-pot hydrolysis process, enable the preparation of stable TiO2 water dispersions. The remarkable stability of these dispersions, evidenced by their outstanding ξ-potential values of −34 mV, facilitates the fabrication of macroporous TiO2 photoactive films throughout spray coating. Employed as photoanodes in a photoelectrochemical cell, our TiO2 photoanodes are compared with conventional TiO2 electrodes obtained from commercial pastes under water splitting conditions. Interestingly, our photoanodes reveal a remarkable three-fold enhancement of the photocurrent performance (132 vs. 46 μA cm−2) and a four-fold increase in the on–off response rate (4 vs. 1 s). These findings underscore the valuable role of cellulose nanocrystals as a green processing asset for achieving TiO2 water dispersions. Moreover, they serve as sacrificial adjuvants for preparing highly macroporous and functional film photoelectrodes, representing a significant step forward in the pursuit of sustainable and efficient materials processing.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Carbon nanomaterials-Based Inks and Electrodes Using Chitin Nanocrystals

  • Calvo, Víctor
  • Martínez-Barón, Carlos
  • Vázquez-Conejo, Benjamín
  • Domínguez-Alfaro, Antonio
  • Paleo, Antonio J.
  • Villacampa, Belén
  • Ansón-Casaos, Alejandro
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • González-Domínguez, José M.
Dispersing 1D carbon nanomaterials (CNMs) for film processing traditionally relies on surfactants or organic solvents. These methods, however, raise environmental concerns and can negatively impact the final properties of the CNMs. In this work we demonstrate that chitin nanocrystals (ChNCs) synthesized via acid hydrolysis provide a greener pathway for the development of waterborne CNMs-based inks, including single-walled carbon nanotubes, multiwalled carbon nanotubes, and carbon nanofibers. Various concentrations of ChNCs were mixed with each type of CNM to maximize the CNM concentration within the ink. In-depth characterization of the CNM/ChNC inks preceded their processing into supported conductive films by spray-coating. A subsequent thermal treatment of ChNCs at 450 °C leads to the efficient removal of ChNC and results in a significant enhancement of the electrical conductivity. Moreover, freeing the CNMs network structure contributes to increased electrochemical performance of the treated films, as expressed by improved Faradaic charge transfer efficiencies and kinetics reflected by 1 order of magnitude reduced rate constants, when tested with various redox probes. Our findings highlight the potential of ChNCs as a sustainable processing adjuvant of CNMs, leading to electrically conductive electrodes with suitable electrochemical properties for their use in diverse devices and applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Single-walled carbon nanotube buckypaper as support for highly permeable double layer polyamide/zeolitic imidazolate framework in nanofiltration processes

  • Berned-Samatán, V.
  • Rubio, C.
  • Galán-González, A.
  • Muñoz, E.
  • Benito, A. M.
  • Maser, W. K.
  • Coronas, J.
  • Téllez, C.
The development of membranes for nanofiltration applications requires not only selective layers but also suitable supports to control their synthesis as well as to enable efficient and competitive membrane performances. Single-walled carbon nanotube free-standing films (denoted as buckypaper) have been used as supports for the preparation of polyamide (PA) layers by interfacial polymerization (IP) and tested for dead-end nanofiltration for dyes removal (265–1017 Da) from water and organic solvents. The arrangement of the phases during the IP is essential, thus impregnation on the buckypaper support, first with the organic phase and then with the aqueous phase (denoted as inverse IP, iIP) leads to permeances (of up to 28.0 and 31.4 L m-2 h-1 bar-1 for water and methanol, respectively) and rejection values (>96%) that exceed those of the membranes prepared by reversing the impregnation order. Secondly, a double layer PA/zeolitic imidazolate framework (ZIF-8 or ZIF-93) was prepared on the buckypaper (bp). The design of this double layer led to superior membrane performance, in particular for the hydrophilic ZIF-93, as it changes the PA layer properties (increasing both hydrophilicity and surface roughness) providing higher permeances (up to 59.3 and 76.0 L m-2 h-1 bar-1 for water and methanol, respectively) and dye rejections (>98.5%) than the bare PA layer prepared by iIP. This attractive performance of the PA/ZIF-93/bp membrane has been corroborated with experiments in cross-flow nanofiltration and dead-end nanofiltration of aqueous salt solutions, long-term stability nanofiltration and the study the membrane separation performance after a chlorine treatment. The results reported here therefore show the enormous potential of these membrane architectures for a variety of selective separation processes. © 2022 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Hybrids of Deep HOMO Organic Cyanoacrylic Acid Dyes and Graphene Nanomaterials for Water Splitting Photoanodes

  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Orduna, Jesús
  • Villacampa, Belén
  • Blesa, María-Jesús
Dye-sensitization is a promising strategy to improve the light absorption and photoactivity abilities of wide-bandgap semiconductors, like TiO2. For effective water-splitting photoanodes with no sacrificial agents, the electrochemical potential of the dye must exceed the thermodynamic threshold needed for the oxygen evolution reaction. This study investigates two promising organic cyanoacrylic dyes, designed to meet that criterion by means of theoretical calculations. Both yellow-colored dyes were synthesized and characterized by optical and photoelectrochemical techniques, demonstrating strong light absorption in the visible region, suitable experimental reduction potentials, and adsorption from the organic solvent onto mesoporous TiO2 layers. In addition, to promote immobilization in aqueous electrolytes, the dyes were hybridized with graphene oxide or multi-walled carbon nanotubes. Photoelectrochemical analysis of the dye-sensitized photoelectrodes demonstrated efficient charge transfer from the dyes to the TiO2 photoanode under simulated solar light. While the starting photocurrent notably surpassed the blank TiO2, a subsequent decay points to kinetic obstacles that still need to be overcome.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Detailed thermal reduction analyses of graphene oxide via in-situ TEM/EELS studies

  • Pelaez-Fernandez, M.
  • Bermejo, A.
  • Benito, A.M.
  • Maser, W.K.
  • Arenal, R.
We report an in-depth study of the reduction of graphene oxide (GO) by in-situ thermal transmission electron microscopy (TEM) analysis. In-situ heating high-resolution TEM (HRTEM) imaging and electron energy-loss spectroscopy (EELS) measurements have been combined to identify the transformations of different oxygen functional groups, the desorption of physisorbed and chemisorbed water and the graphitisation as a function of the temperature in the range from 70 up to 1200 °C. A model for the general removal of water and OFGs is proposed based on different chemical and physical parameters that have been monitored. All this unique information provides a detailed roadmap of the thermal behaviour of GO at an extended range of temperature. This is not only of interest to understand the thermal reduction process of GO but also of critical relevance to the response of GO in applications when exposed to thermal effects.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Waterborne graphene-and nanocellulose-based inks for functional conductive films and 3d structures

  • González-Domínguez J.M.
  • Baigorri A.
  • Álvarez-Sánchez M.Á.
  • Colom E.
  • Villacampa B.
  • Ansón-Casaos A.
  • García-Bordejé E.
  • Benito A.M.
  • Maser W.K.
In the vast field of conductive inks, graphene-based nanomaterials, including chemical derivatives such as graphene oxide as well as carbon nanotubes, offer important advantages as per their excellent physical properties. However, inks filled with carbon nanostructures are usually based on toxic and contaminating organic solvents or surfactants, posing serious health and environmental risks. Water is the most desirable medium for any envisioned application, thus, in this context, nanocellulose, an emerging nanomaterial, enables the dispersion of carbon nanomaterials in aqueous media within a sustainable and environmentally friendly scenario. In this work, we present the development of water-based inks made of a ternary system (graphene oxide, carbon nanotubes and nanocellulose) employing an autoclave method. Upon controlling the experimental variables, low-viscosity inks, high-viscosity pastes or self-standing hydrogels can be obtained in a tailored way. The resulting inks and pastes are further processed by spray-or rod-coating technologies into conductive films, and the hydrogels can be turned into aerogels by freeze-drying. The film properties, with respect to electrical surface resistance, surface morphology and robustness, present favorable opportunities as metal-free conductive layers in liquid-phase processed electronic device structures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Rational description and modelling of the separation of nanotubes from solid nanoparticles in centrifugation processes

  • Ciria J.C.
  • Ansón-Casaos A.
  • Benito A.M.
  • Maser W.K.
Centrifugation of liquid dispersions is a typical technique being employed to separate single-walled carbon nanotubes (SWCNTs) from big aggregates and impurities. Shining light on the underlying mechanism contributes to a more efficient preparation of corresponding suspensions or inks with improved properties. In this work, we model the sedimentation process by applying fundamental equations and a mathematical algorithm for the centrifugation routine, which takes into account centrifugation parameters and the geometry of nanoparticles. The model is fed with experimental data, namely, the centrifugation mass yield, the SWCNT purity index, metal contents, and nanoparticle sizes measured for pristine, thermally-oxidized, and chemically functionalized SWCNT samples. Particle aggregation, including SWCNT bundling, and changes due to physicochemical pretreatments are taken into account. It is shown that the complete experimental data set can be quantitatively well understood in terms of the particle sedimentation coefficient. The proposed model thus provides a rational concept to optimize centrifugation protocols for the separation of mixtures containing nanoparticles of different shapes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Fabrication of α-Fe<sub>2</sub>O<sub>3</sub> Nanoparticles/g-C<sub>3</sub>N<sub>4</sub> Direct Z-Scheme Heterojunction of Durable Photocatalytic Activity

  • Galán-González, Alejandro
  • Fernández, Isaías
  • Zaluzec, Nestor J.
  • Cambré, Sofie
  • Arenal, Raul
  • Benito, Ana M.
  • Maser, Wolfgang K.
The fabrication of a nanohybrid photocatalyst that combines α-Fe2O3 nanoparticles with graphitic carbon nitride (g-C3N4) is reported. The ensuing direct Z-scheme heterojunction greatly boosts the photocatalytic activity of the α-Fe2O3/g-C3N4 nanohybrids. This results in organic dye degradation rates more than two times higher than its individual components, promoted by the efficient charge separation and transfer of the Z-scheme heterojunction mechanism of the nanohybrid photocatalyst. In addition, recyclability tests show an outstanding stability of the nanohybrids spanning five consecutive dye degradation experiments, during which the degradation rate is slightly improved. The origin of the improved photocatalytic performance of the nanohybrid lies in the intimate interaction between α-Fe2O3 and g-C3N4 afforded by the two-step fabrication process, which enables the direct and controlled growth of α-Fe2O3 nanoparticles on g-C3N4. A first ultrasound impregnation step promotes the effective anchoring of stable Fe species via Fe−N and C−N/C−O bonding, while a second microwave phase conversion step induces the subsequent growth of α-Fe2O3 nanoparticles on the g-C3N4 sheets. Careful control of the FeCl3 precursor concentration up to a threshold value of 0.25 M during impregnation enables complete control over their size and phase. This approach clearly highlights the benefits of microwave reactor systems in the fabrication of hematite-based Z-scheme photocatalytic, overcoming the limitations of conventional thermal treatment technology.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Novel Methodology to Assess Salt Movement Between Mortar and Stones from Heritage in Spain

  • Pollet, Linde
  • Antolín-Rodríguez, Andrea
  • Gisbert-Aguilar, Josep
  • Búrdalo-Salcedo, Gabriel
  • Juan-Valdés, Andrés
  • García-Álvarez, César
  • Raga-Martín, Angel
  • Schroeyers, Wouter
  • Calvo, Víctor
  • Fernández-Raga, María
The development of sustainable cementitious materials is crucial to reduce the environmental footprint of the construction industry. Alkali-activated materials (AAMs) have emerged as promising environmentally friendly alternatives; however, their compatibility with natural stone in heritage structures remains poorly understood, especially regarding salt migration and related damage to stones. This study presents a novel methodology for assessing salt movement in solid materials between two types of stones—Boñar and Silos—and two types of binders: blended Portland cement (BPC) and an AAM. The samples underwent capillarity and immersion tests to evaluate water absorption, salt transport, and efflorescence behavior. The capillarity of the Silos stone was 0.148 kg·m−2·t−0.5, whereas this was 0.0166 kg·m−2·t−0.5 for the Boñar stone, a ninefold difference. Conductivity mapping and XRD analysis revealed that AAM-based mortars exhibit a significantly higher release of salts, primarily sodium sulfate, which may pose a risk to adjacent porous stones. In contrast, BPC showed lower salt mobility and different salt compositions. These findings highlight the importance of evaluating the compatibility between alternative binders and heritage stones. The use of AAMs may pose significant risks due to their tendency to release soluble salts. Although, in the current experiments, no pore damage or mechanical degradation was observed, additional studies are required to confirm this. A thorough understanding of salt transport mechanisms is therefore essential to ensure that sustainable restoration materials do not inadvertently accelerate the deterioration of structures, a process more problematic when the deterioration affects heritage monuments.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Novel Egg White Protein–Chitin Nanocrystal Biocomposite Films with Enhanced Functional Properties

  • Baquero-Aznar, Víctor
  • Calvo, Víctor
  • González-Domínguez, José Miguel
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • Salvador, María Luisa
  • González-Buesa, Jaime
This study aims to develop egg white protein (EWP) biocomposite films reinforced with chitin nanocrystals (ChNCs, 1–5 wt.%) by compression molding to overcome the mechanical and barrier limitations of protein-based films for sustainable packaging. ChNC incorporation may modulate film microstructure, crystallinity, and thermal stability, thereby enhancing functional performance. Films were prepared by adding ChNCs either as aqueous suspensions or lyophilized powder, and their structural, thermal, mechanical, optical, and barrier properties were systematically evaluated. Scanning electron microscopy confirmed a more homogeneous dispersion of ChNCs when added as suspensions, while powder addition promoted partial aggregation. X-ray diffraction revealed increased crystallinity with ChNC reinforcement. Mechanical tests showed that films with 2 wt.% ChNCs in suspension exhibited the highest tensile strength, whereas those with 5 wt.% in powder form became stiffer but less extensible. Oxygen permeability was not significantly affected, while water vapor permeability decreased by up to 14.5% at 2 wt.% ChNCs incorporated as powder. Transparency and color remained largely unchanged by ChNC addition, except for a slight increase in yellowness. Overall, these findings demonstrate that the incorporation method and concentration of ChNCs play a crucial role in tailoring the physicochemical performance of EWP films. The results provide new insights into the design of EWP-based nanocomposites and support their potential as bio-derived materials for advanced food packaging applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Large-strain anisotropic behavior of meat during cooking: A finite element study

  • Grasa, Jorge
  • Teresi, Luciano
  • van der Sman, Ruud
This paper investigates the role of anisotropy in the deformation of meat during cooking, and how it influences transport properties such as diffusion and thermal conductivity. To address this multiphysics problem a Finite Element model was developed, coupling mass transfer of water with thermal energy transport and large-strain solid mechanics. To account for fiber directionality, an anisotropic constitutive model with swelling-driven deformation is implemented. Particular emphasis is given to the definition of the reference configuration. Numerical simulations reveal that fiber orientation significantly influences the local stretch and overall shape evolution during pan frying. The magnitude and anisotropy of the deformation are sensitive to the swelling parameters and the fiber stiffness. These findings offer insights into the physical origin of cooking-induced texture transformations in meat and provide a framework for modeling fibrous biological materials undergoing thermal and fluid-driven processes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

3-component (N, Fe, Co) atomically dispersed ORR catalysts prepared by laser-driven decomposition of organic precursors

  • Pakrieva, Ekaterina
  • Hernandez-Ferrer, Javier
  • Martinez, Gema
  • Balas, Francisco
  • García-Bordeje, Enrique
  • Anson-Casaos, Alejandro
  • Simonelli, Laura
  • Bartolome, Fernando
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Hueso, Jose L.
  • Santamaria, Jesus
The sluggish kinetics of the oxygen reduction reaction (ORR) remain a key bottleneck for the commercialization of proton exchange membrane fuel cells (PEMFCs), driving the search for efficient, non-precious metal catalysts. Herein, we present a laser-assisted pyrolysis strategy for the synthesis of nitrogen-doped carbon (NC) materials, both metal-free and containing atomically dispersed Fe and Co, using aerosolized phthalocyanine precursors and a near-instantaneous rapid decomposition under a high-energy laser beam, while preventing metal aggregation. A single-step post-synthetic thermal activation under an NH₃/N₂ atmosphere further tailors the textural and surface properties, without requiring ammonia co-feeding during laser pyrolysis, acid etching, or multiple treatments, marking a significant improvement over our previously reported single atom (Fe-N/C) protocols. The resulting Fe_Co/NC_tr catalyst exhibits high specific surface area, enhanced microporosity, improved graphitization, and increased abundance of electrochemically beneficial nitrogen sites. Compared to our earlier reported Fe–N/C catalysts, Fe_Co/NC_tr delivers significantly higher limiting current densities and enhanced durability in alkaline media. Overall, the developed Fe_Co/NC catalyst exhibits good ORR catalytic activity and outstanding long-term stability in alkaline media, comparable to the state-of-the-art commercial Pt/C catalysts. Cyanide poisoning tests confirm the essential role of atomically dispersed Fe2+ and Co2+ as active ORR sites.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

FEM modeling of hamburger pan cooking: Fat content influence and neural network-based prediction of fat loss

  • Hernández-Alhambra, E.
  • Guiu, P.
  • Ferrer-Mairal, A.
  • Martínez, M.A.
  • Calvo, B.
  • Grasa, J.
  • Salvador, M.L.
In this study, we developed an improved contact-cooking model that incorporates variations in fat content and its retention capacity, aiming to accurately simulate products with different compositions. The proposed approach incorporates the structural heterogeneity of meat by distinguishing between muscle fibers and interstitial fluid, and simulates the transport of water and fat between these regions. The model also accounts for heat transfer and meat deformation, representing the tissue as a hyperelastic material. The computational framework was implemented for the pan-cooking of hamburgers with different fat contents (ranging from 3% to 24%) and periodic flipping during the process. To validate the model, cooking experiments were performed. Although increasing fat content did not significantly affect water loss or core temperature (p>0.05), it strongly influenced other critical aspects of cooking performance and product quality, such as surface temperature, fat loss, total cooking losses, and shrinkage. These changes are relevant because they impact texture and consumer perception. In addition, hamburgers with a higher fat content exhibited lower hardness, cohesiveness, gumminess, and chewiness. The model successfully predicted these trends, demonstrating its potential to capture fat-related effects beyond thermal behavior and enabling the use of model-generated data for the training, validation, and testing of a simple neural network to predict fat loss during the cooking of hamburgers with varying water, fat, and protein contents.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

The role of mild microwave irradiation in liquid-phase graphene oxide reduction toward aqueous dispersions and conductive films

  • Benito, A.M.
  • Galán-González, A.
  • Arenal, R.
  • Ansón-Casaos, A.
  • Maser, W.K.
The scalable and sustainable production of high-quality, solution-processable graphene materials remains a central challenge in nanomaterial research. This study investigates the reduction of graphene oxide (GO) in aqueous dispersions using low-power microwave (MW) irradiation and conventional thermal reflux, comparing four common chemical reductants, ascorbic acid, glucose, hydrazine, and sodium borohydride, alongside a reductant-free route. MW irradiation at 200 W induces rapid deoxygenation and enhancement of sp2-domain signatures within seconds, whereas reflux requires extended heating to achieve comparable effects. XPS and Raman analyses reveal that MW treatment promotes a more uniform reduction across reductants and leads to significantly larger apparent crystallite sizes (La) than reflux. Importantly, although chemical reductants remain active under MW conditions, their influence on structural reorganization and electrical performance is considerably diminished, demonstrating that MW field itself governs defect elimination and sp2-domain enrichment under these mild aqueous conditions. The reductant-free MW route yields the highest conductivity (88.4 S/m for 150 nm films) and the largest sp2-domains among all samples. Combined spectroscopic, electrical, and electronic microscopy evidence supports a mechanism in which MW irradiation selectively removes highly defective, oxygen-rich, and sp3-hybridized regions rather than reconstructing the graphene lattice, thereby enriching the remaining framework in extended sp2 networks. Overall, these results position mild MW irradiation as a rapid, and scalable strategy for producing structurally enhanced, water-dispersible rGO dispersions suitable for solution-processed graphene films.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Modification of Physicochemical Properties and Boosting Electrical Conductivity of Reduced Graphene Oxide Aerogels by Postsynthesis Treatment

  • Carrera, C
  • Gonzalez-Dominguez, JM
  • Pascual, FJ
  • Anson-Casaos, A
  • Benito, AM
  • Maser, WK
  • Garcia-Bordeje, E
Electrically conductive graphene aerogels are attracting great interest as functional materials. Nevertheless, graphene aerogels synthesized from graphene oxide usually exhibit low electrical conductivity. In order to increase conductivity, herein a postsynthesis thermal treatment at several temperatures (from 300 to 1000 degrees C) has been applied to pristine reduced graphene oxide aerogels under two different atmospheres, namely, inert Ar flow and isopropanol+H-2 flow. Upon thermal treatment under Ar flow, the electrical conductivity of aerogel upscales with the treatment temperature. More remarkably, the electrical conductivity becomes 1 order of magnitude larger when the thermal treatment is carried out under isopropanol+H-2 instead of under Ar, while maintaining a very low density and porous structure. The electrical conductivity achieved is exceptionally high for such a lightweight and porous material. The exhaustive characterization allowed disclosing that the generation of carbon links between the reduced graphene oxide nanosheets is the reason for this enhancement. The electrically conductive aerogels have excellent prospects for application as scaffolds for energy storage or biomedical applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Carbon nanotube film electrodes enabled by nanostructured biopolymers through aqueous processing

  • Martínez-Barón, Carlos
  • Calvo, Víctor
  • Álvarez-Sánchez, Miguel Ángel
  • Pascual, F. Javier
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • Ansón-Casaos, Alejandro
  • González-Domínguez, José Miguel
Processing carbon nanotubes (CNTs) into conductive films via liquid-phase is highly attractive for the fabrication of electronic and electrochemical device components. However, conventional deposition methods usually suffer from several limitations, including environmental concerns, loss of intrinsic properties, and poor reproducibility. Nanostructured biopolymers (NBs), such as cellulose (CNCs) and chitin (ChNCs) nanocrystals, offer an environmentally friendly strategy for dispersing CNTs in water alternative to organic solvents, surfactants or chemical functionalization. In this work, we present the first direct comparison of conductive and electroactive films resulting from using CNCs and ChNCs as dispersing agents for both single-walled and multi-walled CNTs. The as-made aqueous dispersions are used as inks to fabricate CNT/NB films via spray coating, achieving excellent homogeneity, controllable film thickness, and sheet resistances mostly below 130 Ohm Sq-1. Furthermore, we demonstrate that postdeposition thermal treatment at 450 1C in an inert atmosphere effectively pyrolyzes the non-conductive NB matrix while increasing contacts between CNTs in the network, leading to enhanced electrical conductivities and lectrochemically active surface areas. These findings highlight NBs as greener processing agents for the formulation of waterborne CNT inks and emphasize their relevance for the controlled and sustainable fabrication of conductive films and electrodes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Tuning 2e− and 4e− oxygen reduction pathways in laser-driven FeC electrocatalysts for H2O2 production and Zn–air batteries

  • Pakrieva, Ekaterina
  • Hernández-Ferrer, Javier
  • Rueda-Flores, Ana
  • Balas, Francisco
  • García-Bordeje, Enrique
  • Ansón-Casaos, Alejandro
  • Usoltsev, Oleg
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Hueso, Jose L.
Electrocatalytic oxygen reduction plays a central role in electrochemical energy technologies and in the production of hydrogen peroxide. Achieving selective control over the two-electron (2e−) and four-electron (4e−) oxygen reduction reaction (ORR) pathways within a single catalyst platform remains challenging. Here, we report a laser-driven synthesis of Fesingle bondC nanostructures that enables tunable ORR selectivity through controlled post-treatment. Air annealing at 300 °C yields high H2O2 selectivity (~75% at 0.65 V vs RHE), attributed to oxygen-rich groups and well-developed mesoporosity. Notably, with an optimized 2-electron catalyst, 80 ppm of H2O2 with 94% faradaic efficiency was achieved after 24 h of electrolysis. In contrast, an ammonia based (NH3/N2) treatment at 900 °C promotes the formation of a microporous structure and the incorporation of nitrogen species, resulting in selective water production (~86% at 0.65 V vs RHE). The 4-electron catalyst delivers power and stability comparable to Pt/GC in a primary zinc–air battery. These findings demonstrate a practical approach for tuning ORR selectivity within a Fe-containing carbon-based platform, using scalable processing and trace Fe contents (<0.1 wt%) with Fe present as atomically dispersed sites, limiting leaching and Fenton-type reactions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Quantitative correlation between cyclic voltammetry and electrochemical impedance spectroscopy models on TiO2 film electrodes

  • Ansón-Casaos, Alejandro
  • Ciria, José C.
  • Esteban-Tello, Pedro
  • Galán-González, Alejandro
  • Hernández-Ferrer, Javier
  • Maser, Wolfgang K.
  • Benito, Ana M.
Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) are widely used to characterize semiconductor electrodes, yet their quantitative equivalence is not often established. Here, we introduce a model framework that clarifies when CV and EIS probe the same physical processes and when they diverge on TiO2 film photoelectrodes with controlled thickness and morphology. EIS measurements are registered at different potentials, covering the whole CV window, and show a progressive evolution. In the general case, outside the charge-accumulation regime, the low-frequency limit of EIS converges quantitatively with a density-of-states-based CV description, demonstrating that both techniques capture identical electronic responses. At more cathodic potentials, systematic deviations arise: EIS yields larger capacitances and lower Faradaic resistances than CV. These discrepancies possibly originate from the different timescales of the techniques, as the longer polarization of EIS may activate slow electrochemical processes that are kinetically inaccessible during CV. The divergence between CV and EIS therefore suggests an onset for different charge transport regimes. In this way, the proposed framework provides a predictive diagnostic tool for TiO2 film electrodes, supporting a consistent interpretation and cross-validation of classical CV and EIS data.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Bottom-up assembly of cellulose nanocrystals as a green entry to structured functional carbons

  • Güemes, Lucas
  • Calvo, Víctor
  • Maya-Segura, Vanessa B.
  • Pires, Elísabet
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • García-Bordejé, Enrique
  • González-Domínguez, José M.
The bottom-up assembly of cellulose nanocrystals (CNCs) into porous scaffolds offers a sustainable route to translate their intrinsic properties into functional 3D materials. This strategy enables precise control over porous architectures, unlocking opportunities for high-performance materials tailored to specific applications. Here, we present the fabrication of structured carbons derived from nanocellulose precursors. CNCs are isolated from cellulosic feedstock in type-I and type-II crystalline allomorphs via a one-pot synthesis process followed by minimal processing steps. The resulting aqueous CNC colloids self-assemble into cross-linked hydrogels through controlled hydrothermal aggregation, followed by lyophilization to produce macroporous aerogels (bulk porosities up to 98%). Each allomorph exhibits distinct aggregation behavior, explored for the first time with type-II CNCs. As proof of concept, these aerogels undergo pyrolysis at varying temperatures and subsequent sulfonation, yielding highly porous carbons functionalized with sulfonic acid groups (functionalization degree of ca. 2400 μmol·g−1). The resulting materials combine macroporosity from hydrothermal assembly with microporosity generated during pyrolysis and sulfonation, forming a hierarchical structure ideal for catalytic applications. Their performance is demonstrated in solketal synthesis (yielding ∼90% of solketal in consecutive cycles after 4 h at room temperature) positioning CNC-based sulfonated aerogels as a greener alternative to conventional Brønsted acid catalysts and surpassing classical activated carbons in sustainability and design.
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Effect of nanocellulose polymorphism on electrochemical analytical performance in hybrid nanocomposites with non-oxidized single-walled carbon nanotubes

  • Dortez Herranz, Silvia|||0000-0002-1999-5605
  • Sierra Gómez, Tania|||0000-0003-3019-2026
  • Álvarez Sánchez, Miguel A.
  • González Domínguez, José L.
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Crevillen, Agustín G.
  • Escarpa Miguel, Jesús Alberto|||0000-0002-7302-0948
10 p., Two cellulose nanocrystals/single-walled carbon nanotube (CNC/SW) hybrids, using two cellulose polymorphs, were evaluated as electrochemical transducers: CNC type I (CNC-I/SW) and CNC type II (CNC-II/SW). They were synthesized and fully characterized, and their analytical performance as electrochemical sensors was carefully studied. In comparison with SWCNT-based and screen-printed carbon electrodes, CNC/SW sensors showed superior electroanalytical performance in terms of sensitivity and selectivity, not only in the detection of small metabolites (uric acid, dopamine, and tyrosine) but also in the detection of complex glycoproteins (alpha-1-acid glycoprotein (AGP)). More importantly, CNC-II/SW exhibited 20 times higher sensitivity than CNC-I/SW for AGP determination, yielding a LOD of 7 mg L?1.These results demonstrate the critical role played by nanocellulose polymorphism in the electrochemical performance of CNC/SW hybrid materials, opening new directions in the electrochemical sensing of these complex molecules. In general, these high-active-surface hybrids smartly exploited the preserved non-oxidized SW conductivity with the high aqueous dispersibility of the CNC, avoiding the use of organic solvents or the incorporation of toxic surfactants during their processing, making the CNC/SW hybrids promising nanomaterials for electrochemical detection following greener approaches., Comunidad de Madrid; Ministerio de Economía y Competitividad de España; CRUE-CSIC; Gobierno de Aragon, Comunidad de Madrid, Ministerio de Economía y Competitividad, Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, Gobierno de Aragón