Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 47
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Latest advances in in situ and operando X-ray-based techniques for the characterisation of photoelectrocatalytic systems

  • Barawi, Mariam|||0000-0001-5719-9872
  • Mesa, Camilo A|||0000-0002-8450-2563
  • Collado, Laura|||0000-0003-0216-3797
  • Villar-García, Ignacio J.
  • Oropeza, Freddy|||0000-0001-7222-9603
  • de la Peña O'Shea, Victor|||0000-0001-5762-4787
  • García-Tecedor, Miguel|||0000-0002-9664-4665
In situ and operando X-ray techniques have emerged as powerful tools for unravelling the complex mechanisms underlying photoelectrochemical transformations. These techniques offer real-time insights into the dynamic processes occurring at the electrode-electrolyte interface during solar-driven water splitting and other PEC reactions. The present work aims to summarise the latest advances in in situ and operando X-ray absorption spectroscopy (XAS), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) for the characterisation of photoelectrocatalytic systems and materials for the generation of solar fuels and value-added chemicals. This review highlights the recent advancements achieved using these techniques for elucidating the structural, chemical, and electronic properties of photoelectrocatalytic materials and interfaces during operation. Besides, this review provides technical guidance for performing these measurements, considering the experimental requirements for each of these spectroscopies. Further, we provide an overview of different state-of-the-art synchrotron-based techniques employed for the characterisation of photoelectrocatalytic materials, focusing on the possibilities of the studied techniques, cell designs and more relevant results.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Plasmonic nanoparticle sensors, current progress, challenges, and future prospects

  • Kant, Krishna
  • Beeram, Reshma
  • Cao, Yi
  • dos Santos, Paulo S. S.
  • González-Cabaleiro, Lara
  • García-Lojo, Daniel|||0000-0002-5477-6299
  • Guo, Heng
  • Joung, Younju
  • Kothadiya, Siddhant
  • Lafuente, Marta|||0000-0003-2660-3726
  • Leong, Yong Xiang
  • Liu, Yiyi
  • Liu, Yuxiong
  • Moram, Sree Satya Bharati
  • Mahasivam, Sanje|||0000-0001-9975-3659
  • Maniappan, Sonia
  • Quesada-González, Daniel|||0000-0003-3064-2146
  • Raj, Divakar
  • Weerathunge, Pabudi
  • Xia, Xinyue
  • Yu, Qian
  • Abalde-Cela, Sara
  • Álvarez Puebla, Ramon A.|||0000-0003-4770-5756
  • Bardhan, Rizia|||0000-0002-5854-652X
  • Bansal, Vipul|||0000-0002-3354-4317
  • Choo, Jaebum|||0000-0003-3864-6459
  • Coelho, Luis C. C.
  • de Almeida, José M. M. M.|||0000-0003-3810-5943
  • Gómez-Graña, Sergio
  • Grzelczak, Marek
  • Herves, Pablo
  • Kumar, Jatish|||0000-0003-3078-6297
  • Lohmueller, Theobald|||0000-0003-2699-7067
  • Merkoçi, Arben|||0000-0003-2486-8085
  • Montaño-Priede, José Luis
  • Ling, Xing Yi|||0000-0001-5495-6428
  • Mallada, Reyes
  • Pérez-Juste, Jorge|||0000-0002-4614-1699
  • Pina, María P.|||0000-0001-9897-6527
  • Singamaneni, Srikanth|||0000-0002-7203-2613
  • Soma, Venugopal Rao
  • Sun, Mengtao|||0000-0002-8153-2679
  • Tian, Limei|||0000-0002-1931-8567
  • Wang, Jianfang|||0000-0002-2467-8751
  • Polavarapu, Lakshminarayana
  • Santos, Isabel Pastoriza|||0000-0002-1091-1364
Plasmonic nanoparticles (NPs) have played a significant role in the evolution of modern nanoscience and nanotechnology in terms of colloidal synthesis, general understanding of nanocrystal growth mechanisms, and their impact in a wide range of applications. They exhibit strong visible colors due to localized surface plasmon resonance (LSPR) that depends on their size, shape, composition, and the surrounding dielectric environment. Under resonant excitation, the LSPR of plasmonic NPs leads to a strong field enhancement near their surfaces and thus enhances various light-matter interactions. These unique optical properties of plasmonic NPs have been used to design chemical and biological sensors. Over the last few decades, colloidal plasmonic NPs have been greatly exploited in sensing applications through LSPR shifts (colorimetry), surface-enhanced Raman scattering, surface-enhanced fluorescence, and chiroptical activity. Although colloidal plasmonic NPs have emerged at the forefront of nanobiosensors, there are still several important challenges to be addressed for the realization of plasmonic NP-based sensor kits for routine use in daily life. In this comprehensive review, researchers of different disciplines (colloidal and analytical chemistry, biology, physics, and medicine) have joined together to summarize the past, present, and future of plasmonic NP-based sensors in terms of different sensing platforms, understanding of the sensing mechanisms, different chemical and biological analytes, and the expected future technologies. This review is expected to guide the researchers currently working in this field and inspire future generations of scientists to join this compelling research field and its branches.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Regulation of climacteric fruit ripening in melon, recent advances and future challenges

  • Pujol, Marta|||0000-0002-3595-5363
  • Garcia-Mas, Jordi|||0000-0001-7101-9049
Fruit ripening is a complex and highly regulated process where tomato and strawberry have been the model species classically used for studying climacteric and non-climacteric fleshy fruit ripening types, respectively. Melon has emerged as an alternative ripening model because climacteric and non-climacteric cultivars exist, which makes it possible to dissect the regulation of ripening using a genetic approach. Several quantitative trait loci that regulate climacteric fruit ripening have been identified to date, and their combination in both climacteric and non-climacteric genetic backgrounds resulted in lines with different ripening behaviors, demonstrating that the climacteric intensity can be genetically modulated. This review discusses our current knowledge of the physiological changes observed during melon climacteric fruit ripening such as ethylene production, fruit abscission, chlorophyll degradation, firmness, and aroma, as well as their complex genetic control. From pioneer experiments in which ethylene biosynthesis was silenced, to the recent genetic edition of ripening regulators, current data suggest that the climacteric response is determined by the interaction of several loci under quantitative inheritance. The exploitation of the rich genetic diversity of melon will enable the discovery of additional genes involved in the regulation of the climacteric response, ultimately leading to breeding aromatic melon fruits with extended shelf life.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

After silencing suppression, miRNA targets strike back

  • Silvestri, Alessandro
  • Bansal, Chandni
  • Rubio-Somoza, Ignacio|||0000-0003-0754-816X
Within the continuous tug-of-war between plants and microbes, RNA silencing stands out as a key battleground. Pathogens, in their quest to colonize host plants, have evolved a diverse arsenal of silencing suppressors as a common strategy to undermine the host's RNA silencing-based defenses. When RNA silencing malfunctions in the host, genes that are usually targeted and silenced by microRNAs (miRNAs) become active and can contribute to the reprogramming of host cells, providing an additional defense mechanism. A growing body of evidence suggests that miRNAs may act as intracellular sensors to enable a rapid response to pathogen threats. Herein we review how plant miRNA targets play a crucial role in immune responses against different pathogens.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Applied Artificial Intelligence in Materials Science and Material Design

  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
  • Eriksen, Martin|||0000-0003-0601-0990
  • Castro-Alvarez, Alejandro|||0000-0001-8360-8027
  • Garcia, José H.|||0000-0002-5752-4759
  • Botifoll, Marc|||0000-0002-4876-6393
  • Avalos-Ovando, Oscar
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Mugarza, Aitor|||0000-0002-2698-885X
Materials science has traditionally relied on a combination of experimental techniques and theoretical modeling to discover and develop new materials with desired properties. However, these processes can be time-consuming, resource-intensive, and often limited by the complexity of material systems. The advent of artificial intelligence (AI), particularly machine learning, has revolutionized materials science by offering powerful tools to accelerate the discovery, design, and characterization of novel materials. AI not only enhances the predictive modeling of material properties but also streamlines data analysis in techniques like X-Ray diffraction, Raman spectroscopy, scanning probe microscopy, and electron microscopy. By leveraging large datasets, AI algorithms can identify patterns, reduce noise, and predict material behavior with unprecedented accuracy. In this review, recent advancements in AI applications across various domains of materials science, including spectroscopy, synchrotron studies, scanning probe and electron microscopies, metamaterials, atomistic modeling, molecular design, and drug discovery, are highlighted. It is discussed how AI-driven methods are reshaping the field, making material discovery more efficient, and paving the way for breakthroughs in material design and real-time experimental analysis.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enzymes for consumer products to achieve climate neutrality

  • Molina-Espeja, Patricia
  • Sanz-Aparicio, J.
  • Golyshin, Peter N.
  • Robles-Martín, Ana
  • Guallar, Victor
  • Beltrametti, Fabrizio
  • Müller, Markus
  • Yakimov, Mikhail
  • Modregger, Jan
  • Logchem, Moniec van
  • Corvini, Philippe
  • Shahgaldian, Patrick
  • Degering, Christian
  • Wieland, Susanne
  • Timm, Anne
  • Carvalho, Carla C.C.R. de
  • Re,Ilaria
  • Daniotti, Sara
  • Thies, Stephan
  • Jaeger, Karl-Erich
  • chow, Jennifer
  • Streit, Wolfgang R.
  • Lottenbach, Roland
  • Rösch, Rainer
  • Ansari, Nazanin
  • Ferrer, Manuel
29 pags., 4 figs., 3 tabs., 1 graf., Accumulated greenhouse gas emissions are expected to increase from 36.2 Giga-tons (Gt) to 60 Gt over the next three decades. The global surface temperature has increased by¿+¿1.09¿°C since 2001, and might increase by¿+¿2.2¿°C in 2100, +3.6¿°C in 2200 and +4.6¿°C in 2500. These emissions and temperature rises cannot be reduced in their entirety, but they can be lowered by using enzymes. Enzymes are proteins that catalyze biochemical reactions that make life possible since 3.8 billion years ago. Scientists have been able to "domesticate" them in such a way that enzymes, and their engineered variants, are now key players of the circular economy. With a world production of 117 Kilo-tons and a trade of 14.5 Billion-dollars, they have the potential to annually decrease CO2 emissions by 1 to 2.5 Billion-tons (Bt), the carbon demand to synthesise chemicals by 200 Million tons (Mt), the amount of chemicals by 90¿Mt, and the economic losses derived from global warming by 0.5%, while promoting biodiversity and our planet¿s health. Our success to increase these benefits will depend on better integration of enzymatic solutions in different sectors., This study was conducted under the auspices of the FuturEnzyme Project funded by the European Union’s Horizon 2020 Research and Innovation Programme under Grant Agreement No. 101000327. MF also acknowledges Grants PID2020-112758RB-I00, PDC2021-121534-I00, and TED2021-130544B-I00 from the MCIN/AEI/10.13039/501100011033 and the European Union (“NextGenerationEU/PRTR”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A claim for a ‘next generation’ of multisite range-wide forest genetic trials built on the legacy of ecological genetics to anticipate responses to climate

  • Sampedro Pérez, Luis
  • Alía Miranda, Ricardo
The authors thank the support received from agencies MCIU/AEI/FEDER, UE (grant RESILPINE, RTI2018-094691-B-C33), CSIC (grant AEPP-2022AEP013) and MCIN/10.13039/501100011033-Next Generation EU/PRTR (grant TAPPINESS, TED2021-132456B-I00), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Regulation of climacteric fruit ripening in melon: recent advances and future challenges

  • Pujol, Marta
  • García-Mas, Jordi
Fruit ripening is a complex and highly regulated process where tomato and strawberry have been the model species classically used for studying climacteric and non-climacteric fleshy fruit ripening types, respectively. Melon has emerged as an alternative ripening model because climacteric and non-climacteric cultivars exist, which makes it possible to dissect the regulation of ripening using a genetic approach. Several quantitative trait loci that regulate climacteric fruit ripening have been identified to date, and their combination in both climacteric and non-climacteric genetic backgrounds resulted in lines with different ripening behaviors, demonstrating that the climacteric intensity can be genetically modulated. This review discusses our current knowledge of the physiological changes observed during melon climacteric fruit ripening such as ethylene production, fruit abscission, chlorophyll degradation, firmness, and aroma, as well as their complex genetic control. From pioneer experiments in which ethylene biosynthesis was silenced, to the recent genetic edition of ripening regulators, current data suggest that the climacteric response is determined by the interaction of several loci under quantitative inheritance. The exploitation of the rich genetic diversity of melon will enable the discovery of additional genes involved in the regulation of the climacteric response, ultimately leading to breeding aromatic melon fruits with extended shelf life., This work was supported by grants PID2021-125998OB-C21, TED2021-131955B-I00, and CEX2019-000902-S funded by Ministerio de Ciencia e Innovación MCIN/AEI/10.13039/501100011033 and FEDER, and by the CERCA Programme/Generalitat de Catalunya and 2021-SGR-00075 grant from the Generalitat de Catalunya to MP and JGM., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000902-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Contributions of Intraspecific Variation to Drought Tolerance in Trees

  • Gazol Burgos, Antonio
  • Fajardo, Alex
  • Camarero, Jesús Julio
[Purpose of Review] The capacity of woody plants to cope with climate change depends on their adjustments to changing environmental conditions by phenotypic plasticity or by genotypic changes (i.e., local adaptation). To determine whether intraspecific trait variation (ITV) translates into resistance or tolerance to drought and eventually how it relates to performance when facing drought, we reviewed the recent literature on the intraspecific variation in woody plant functional traits along aridity gradients., [Recent Findings] At the intraspecific level, functional traits vary along aridity gradients, but this variation depends on the considered trait and species. While ITV is ubiquitous and of relevant magnitude, its relationship with tree performance in the case of growth or survival is unclear and very idiosyncratic., [Summary] ITV varies along aridity gradients and, for several traits, is of comparable magnitude as interspecific trait variation. However, the relationship between ITV and tree performance is not consistent among species. This makes the use of ITV challenging when quantifying its contribution to drought tolerance., pen Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. AG is supported by the “Ramón y Cajal” Program of the Spanish MICINN under Grant RyC2020-030647-I and by CSIC under grant PIE-20223AT003. This research was funded by the Science and Innovation Ministry and the AEI with projects PID2021-123675OB-C43 and TED2021-129770B-C21. AF thanks ANID PIA/BASAL FB210006., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis, characterization & catalysis of ITQ 2D metal-organic frameworks and spectroscopic & photodynamic properties of their composites with organic dyes

  • Gutierrez, Mario
  • Díaz Morales, Urbano
  • Cohen, Boiko
  • Douhal, Abderrazzak
Metal-organic frameworks (MOFs) have gained significant attention for their broad range of applications in a variety of scientific and technological fields. These materials are crystalline in nature and are formed through the self-assembly of metal ions or clusters with organic linkers via coordination bonds. Typically, MOFs adopt three-dimensional (3D) structures by assembling the subunits in all three spatial directions forming a relatively rigid network. However, in recent years, low-dimensional 2D-MOFs have garnered considerable interest due to their distinctive properties, particularly in gas adsorption/separation, sensing, catalysis, and chemical release applications. 2D-MOFs are created through the assembly of a single layer, resulting in sheet-like structures that provide larger active surface areas, thereby enhancing the diffusion of guest molecules. A notable example of this is the ITQ family of 2D-MOFs, which are formed through the assembly of 1D organic-inorganic structural subunits. The resulting mesoscopic lamellar structure of these MOFs favors interactions with organic molecules and hence improves the catalytic performance. Here, we provide a comprehensive overview of the available synthesis, structural characterization, physico-chemical properties, and specific catalytic performance of ITQ 2D MOF hybrid materials. We examine available strategies to obtain tuneable Lewis and Brønsted acid active sites from the 1D sub-domains as well as provide examples for the application of these MOFs in specific reactions. We also review studies on the effect of the nature of organic spacers as well as that of the metal clusters on the spectroscopic and photodynamical properties of composites formed by these MOFs as hosts with well-known organic fluorescent dyes (guests)., This work is dedicated to Prof. Avelino Corma for his 72nd birthday. This research was supported by grants: PID2020-116519RB-I00 and TED2021–131650B–I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union (EU); SBPLY/19/180501/000212 and SBPLY/21/180501/000108 funded by JCCM and by the EU through “Fondo Europeo de Desarollo Regional” (FEDER). M. G. also thanks the EU for financial support through Fondo Social Europeo Plus (FSE+). U. D. acknowledges support from Grant PID2020-112590GB-C21 and from Severo Ochoa excellence program CEX2021-001230-S, both funded by MCIN/AEI/10.13039/501100011033. This study forms part of the Advanced Materials program and was supported by MICIN with funding from European Union NextGeneration (PRTR-C17.I1) and by Generalitat Valenciana (MFA/2022/003)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001230-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Insights into the Methodological, Biotic and Abiotic Factors Influencing the Characterization of Xylem-Inhabiting Microbial Communities of Olive Trees

  • Anguita-Maeso, Manuel
  • Navas Cortés, Juan Antonio
  • Landa, Blanca B.
Vascular pathogens are the causal agents of some of the most devastating plant diseases in the world, which can cause, under specific conditions, the destruction of entire crops. These plant pathogens activate a range of physiological and immune reactions in the host plant following infection, which may trigger the proliferation of a specific microbiome to combat them by, among others, inhibiting their growth and/or competing for space. Nowadays, it has been demonstrated that the plant microbiome can be modified by transplanting specific members of the microbiome, with exciting results for the control of plant diseases. However, its practical application in agriculture for the control of vascular plant pathogens is hampered by the limited knowledge of the plant endosphere, and, in particular, of the xylem niche. In this review, we present a comprehensive overview of how research on the plant microbiome has evolved during the last decades to unravel the factors and complex interactions that affect the associated microbial communities and their surrounding environment, focusing on the microbial communities inhabiting the xylem vessels of olive trees (Olea europaea subsp. europaea), the most ancient and important woody crop in the Mediterranean Basin. For that purpose, we have highlighted the role of xylem composition and its associated microorganisms in plants by describing the methodological approaches explored to study xylem microbiota, starting from the methods used to extract xylem microbial communities to their assessment by culture-dependent and next-generation sequencing approaches. Additionally, we have categorized some of the key biotic and abiotic factors, such as the host plant niche and genotype, the environment and the infection with vascular pathogens, that can be potential determinants to critically affect olive physiology and health status in a holobiont context (host and its associated organisms). Finally, we have outlined future directions and challenges for xylem microbiome studies based on the recent advances in molecular biology, focusing on metagenomics and culturomics, and bioinformatics network analysis. A better understanding of the xylem olive microbiome will contribute to facilitate the exploration and selection of specific keystone microorganisms that can live in close association with olives under a range of environmental/agronomic conditions. These microorganisms could be ideal targets for the design of microbial consortia that can be applied by endotherapy treatments to prevent or control diseases caused by vascular pathogens or modify the physiology and growth of olive trees., This research was funded by projects AGL2016-75606-R, PID2020-114917RB-I00 (Programa Estatal de I + D Orientado a los Retos de la Sociedad from Spanish Government, the Spanish State Research Agency and FEDER-EU); TED2021-130110B-C41 (Proyectos Orientados a la Transición Ecológica y a la Transición Digital-Plan de Recuperación, Transformación y Resiliencia from Spanish Government, the Spanish State Research Agency) and XF-ACTORS (Xylella fastidiosa Active Containment Through a Multidisciplinary Oriented Research Strategy; grant 727987 from the European Union’s Horizon 2020 Framework Research Programme). MA-M acknowledges the research fellowship BES-2017-082361 from the Spanish Ministry of Economy and Competitiveness., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Silver-Exchanged Zeolite Y Catalyzes a Selective Insertion of Carbenes into C–H and O–H Bonds

  • Zheng, Yongkun
  • Vidal-Moya, Alejandro
  • Hernández-Garrido, Juan Carlos
  • Mon, Marta
  • Leyva, Antonio
Commercially available zeolite Y modulates the catalytic activity and selectivity of ultrasmall silver species during the Buchner reaction and the carbene addition to methylene and hydroxyl bonds, by simply exchanging the counter cations of the zeolite framework. The zeolite acts as a macroligand to tune the silver catalytic site, enabling the use of this cheap and recyclable solid catalyst for the in situ formation of carbenes from diazoacetate and selective insertion in different C¿H (i.e., cyclohexane) and C¿O (i.e., water) bonds. The amount of catalyst in the reaction can be as low as ¿0.1 mol % silver. Besides, this reactivity allows deeply drying the HY zeolite framework by making the strongly adsorbed water molecules react with the in situ formed carbenes., This work is part of the project PID2020-115100GB-I00 funded by MCIN/AEI/10.13039/501100011033MICIIN (Spain). Thanks are extended to the TED2021-130465B-I00 project of the MICIIN. Financial support by the Severo Ochoa Centre of Excellence Program (CEX2021-001230-S) is gratefully acknowledged. M.M. thanks MICIIN for a contract under the Juan de la Cierva program (FJC2019-040523-I). Y.Z. thanks the China Scholarship Council (CSC No. 202009350009) for a Ph.D. fellowship. The AC-STEM data were obtained at the DME-UCA node of the Spanish Unique Scientific and Technological Infrastructure (ICTS) of Electron Microscopy of Materials, ELECMIM., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001230-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Silica based Janus nanoparticles: Synthesis methods, characterization, and applications

  • Milian, Yanio E.
  • Claros, Martha
  • Ushak, Svetlana
  • Vallejos, Stella
Janus nanoparticles (JNPs) represent a singular group of functional materials that exhibit an asymmetrical structure, namely two hemispheres of different chemical compositions. Currently, several raw materials are employed to develop Janus nanoparticles. Among them, silica nanoparticles exhibit significant advantages over other starting materials due to their relatively simple synthesis and modification, high porosity, excellent adsorption capacity, extraordinary colloidal stability, and biocompatibility. Therefore, this review aims to offer a systematic assessment of silica-based Janus nanoparticles, providing a clear description and illustration of the available synthesis methods, which for clarity have been classified into three main categories: masking, self-assembly, and phase separation. The review also discusses the most convenient paths for determining the amphiphilic character of these particles due to the relevance of this property, as well as their potential application in three main areas, including medicine, environment, and energy. Additionally, the reader can find an account of the SiO2-based JNPs shapes reported in the literature, which are summed up in tables to facilitate the identification of their properties and proved applications. The last section is dedicated to discussing the prospects for the synthesis methods of JNPs, the behavioral prediction, and approaches for their characterization and further application., This work was supported by “ FONDECYT Postdoctoral ” 2020 [grant number 3200786 ], Chile and also funded by the Lithium I+D+i Center of the Universidad Católica del Norte (lithium.ucn.cl). Milian and Ushak wish to thanks to “ FONDECYT Regular ” 2023 [grant number 1231721 ] project, Chile. S. Vallejos acknowledges the support of MCIN/AEI/10.13039/501100011033 and the EU “NextGenerationEU”/PRTR” via Grant TED2021-131058B-I00 . Part of the graphical abstract was adapted from the template “Cell-Mediated Drug Delivery for Cancer Treatment”, by BioRender.com (2023), Retrieved from https://app.biorender.com/biorender-templates ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A review on carbon materials for electrochemical energy storage applications: State of the art, implementation, and synergy with metallic compounds for supercapacitor and battery electrodes

  • Lobato Peralta, Diego Ramón
  • Okoye, Patrick U.
  • Alegre Gresa, Cinthia
9 figures, 2 tables., Carbon materials play a fundamental role in electrochemical energy storage due to their appealing properties, including low cost, high availability, low environmental impact, surface functional groups, high electrical conductivity, alongside thermal, mechanical, and chemical stability, among other factors. Currently, carbon materials can be considered the most extensively explored family in the field of supercapacitors and batteries, which are devices covering a wide range of applications demanding high power and high energy. However, as with all technologies, there is a process of adaptation and optimization; hence, carbon materials have been aligning with the advances that emerge. Similarly, over the years, new methods and processes have been discovered to produce carbons more suitable for energy storage, adapting them to present a good synergy with metal-based compounds to meet current standards. In this work, we present a compilation of advances in the field of carbon materials used in supercapacitors and batteries, from the inception of these technologies to the present day., This work was financially supported by Proyectos de Transición Ecológica y Digital, under the project FABSEE (Ref. TED2021-130279A-I00) Iron-air batteries as cost-effective and sustainable electrochemical energy storage, with funding from the Next Generation EU Programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

After silencing suppression: miRNA targets strike back

  • Silvestri, Alessandro
  • Bansal, Chandni
  • Rubio-Somoza, Ignacio
Within the continuous tug-of-war between plants and microbes, RNA silencing stands out as a key battleground. Pathogens, in their quest to colonize host plants, have evolved a diverse arsenal of silencing suppressors as a common strategy to undermine the host's RNA silencing-based defenses. When RNA silencing malfunctions in the host, genes that are usually targeted and silenced by microRNAs (miRNAs) become active and can contribute to the reprogramming of host cells, providing an additional defense mechanism. A growing body of evidence suggests that miRNAs may act as intracellular sensors to enable a rapid response to pathogen threats. Herein we review how plant miRNA targets play a crucial role in immune responses against different pathogens., Work at MoRE lab is funded by RTI2018-097262-B-I00 and TED2021-131955B-100 (both funded by MCIN/AEI/10.13039/501100011033 and by ‘ERDF A way of making Europe’ and ‘European Union NextGenerationEU/PTR’), and through the ‘Severo Ochoa Programme for Centres of Excellence in R&D’ 2016-2019 (SEV-2015-0533) and 2020-2023 (CEX2019-000902-S) funded by MCIN/AEI/ 10.13039/501100011033 and the CERCA program from the Generalitat de Catalunya to I-R-S. A.S. has received postdoctoral fellowship funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No 945043., With funding from the Spanish goverment through the "Severo Ochoa Centre of Excellence" accreditation (SEV-2015-0533 and CEX2019-000902-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A matter of smell: The complex regulation of aroma production in melon

  • Mayobre, Carlos
  • García-Mas, Jordi
  • Pujol, Marta
No data was used for the research described in the article., Melon fruit flavor is one of the most valuable traits for consumers. Aroma, formed by volatile organic compounds (VOCs), is a major component of flavor but has been neglected in breeding programs because of its complex regulation. Although the genetic regulation of VOCs biosynthesis is not fully understood, several advances have been recently achieved. VOCs originate from the degradation of fatty acids, aminoacids and terpenes, and the role of newly described enzymes, transcription factors and putative regulators is here discussed. Furthermore, ethylene plays a key role in fruit aroma production in melon, triggering the conversion of green-flavored aldehydes into fruity-flavored esters. A current challenge is to understand the ethylene-independent regulation of VOCs formation. Environmental conditions and human processing can also shape the melon volatile profile, and future research should focus on studying the effect of climate change in aroma formation., This work was supported by grants PID2021-125998OB-C21 funded by MICIU/AEI/ 10.13039/501100011033 and by “ERDF/EU”; and CEX2019–000902-S funded by MICIU/AEI/ 10.13039/501100011033; and TED2021-13955B-100 funded by MICIU/AEI/ 10.13039/501100011033 and by the “European Union NextGeneration EU/PRTR”; the CERCA Programme/Generalitat de Catalunya and the 2021 SGR 00075 grant from the Generalitat de Catalunya to JG-M and MP. CM was supported by grant 2021FI_B2_00180 from the Secretaria d'Universitats i Recerca del Departament d'Empresa i Coneixement de la Generalitat de Catalunya and by “ESF investing in your future”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

How effective are interventions to reduce attacks on people from large carnivores? A systematic review protocol

  • Eklund, Ann
  • Frank, Jens
  • López-Bao, José V.
Instances of attacks from large carnivores that lead to human injury or death are increasingly reported worldwide. Ensuring human safety when people and carnivores co-occur is central to minimizing human suffering but is also essential to support sustainable carnivore conservation. Various interventions are available intended to alter either the behavior of large carnivores or people, in order to reduce the likelihood of a risky encounter and an attack. Collated evidence on best practices is still lacking, and this protocol outlines a systematic review of evidence for intervention effectiveness to reduce the risk or severity of direct attacks on humans by large carnivores. Specifically, the review seeks to answer the question: How effective are evaluated interventions in reducing large carnivore attacks on people?, Open access funding provided by Swedish University of Agricultural Sciences. A.E. and J.F. were funded by the LIFE Wild Wolf project. J.V.L.B. was part of the Scientific Committee of the LIFE Wild Wolf and was funded by the Regional Government of Asturias (GRUPIN research grant), Grant/Award Number: IDI/2021/000075 and the Spanish Ministry of Science and Innovation (TED2021-132519B-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single and basal crop coefficients for estimation of water requirements of subtropical and tropical orchards and plantations with consideration of fraction of ground cover, height, and training system

  • Paredes, Paula
  • Petry, Mirta T.
  • Oliveira, Cristina M.
  • Montoya, F.
  • López-Urrea, Ramón
  • Pereira, Luis S.
© The Author(s) 2024., This paper provides an overview of the research carried out over the last 25 years on the FAO56 single and basal crop coefficients of subtropical and tropical orchards and plantations of cactus pear, dragon fruit, fig, jujube, passion fruit, pomegranate, cape gooseberry, cherimoya, guava, longan, lychee, mango, papaya, acerola, carambola, cashew, cacao, coffee, jaboticaba, jatropha, macadamia, açai palm, coconut, date palm, guayule, oil palm, peach palm, ramie and rubber tree. The main objective of this review is to update standard single crop coefficients (Kc) and basal crop coefficients (Kcb) and complete the Kc and Kcb values tabulated in FAO56. Kc is the ratio between the non-stressed crop evapotranspiration (ETc) and the grass reference evapotranspiration (ETo), and Kcb is the ratio between the crop transpiration (Tc) and the ETo. When selecting and analysing the literature, only studies that used the FAO Penman–Monteith equation, or another equation well related to the former to compute ETo were considered, while ETc or Tc were obtained from accurate field measurements on crops under pristine (non-stress cropping conditions) or eustress (“good stress”) conditions. Articles meeting these conditions were selected to provide data for updating Kc and Kcb under standard conditions. The related description of orchards and plantations refers to crop cultivar and rootstock, irrigation systems and scheduling, planting spacing, fraction of ground cover (fc) by the crops, crop height (h), crop age and training systems, as Kc and Kcb values depend on these characteristics. To define the standard Kc and Kcb values of the selected crops, the values collected in the literature were compared with previously tabulated standard Kc and Kcb values. The updated tabulated values are transferable to other locations and climates and can be used to calculate and model crop water requirements, primarily for irrigation planning and scheduling, and thereby supporting of improved water use and savings, which is the overall aim of the current review., The support of the FCT—Fundação para a Ciência e a Tecnologia, I.P., under the project UIDB/04129/2020 of LEAF-Linking Landscape, Environment, Agriculture and Food, Research Unit, and to P. Paredes (https://doi.org/10.54499/DL57/2016/CP1382/CT0022) are acknowledged. R. López-Urrea and F. Montoya thank the support from the Education, Culture and Sports Council (JCCM, Spain) (Award numbers SBPLY/21/180501/000070 and SBPLY/21/180501/000152) and the Agencia Estatal de Investigación with FEDER (grant numbers PID2021–123305OB-C31, and PID2020–113498RB-C21), and NextGenerationEU (TED2021–130405B-I00) co-financing. The study was also funded through the agreement FAO-ISA-RP- 355071 between FAO and the Instituto Superior de Agronomia, Universidade de Lisboa., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single and basal crop coefficients for estimation of water use of tree and vine woody crops with consideration of fraction of ground cover, height, and training system for Mediterranean and warm temperate fruit and leaf crops

  • Pereira, Luis S.
  • Paredes, Paula
  • Oliveira, Cristina M.
  • Montoya, F.
  • López-Urrea, Ramón
  • Salman, Maher
This paper reviews the research on the FAO56 single and basal crop coefficients of fruit trees and vines performed over the past twenty-five years and focus on Mediterranean and warm temperate trees and vines. Two companion papers (López-Urrea et al., (2023) Single and basal crop coefficients for estimation of water use of tree and vine woody crops with consideration of fraction of ground cover, height, and training system for temperate climate fruit crops. Irrig Sci (submitted); Paredes et al. (2023) Single and basal crop coefficients for estimation of water use of tree and vine woody crops with consideration of fraction of ground cover, height, and training system for tropical and subtropical fruit crops. Irrig Sci (submitted)) are dedicated, respectively, to Temperate and to Tropical and Subtropical trees and vines. The main objective of the paper is to update available information on single (Kc) and basal (Kcb) standard crop coefficients, and to provide for updating and completing the FAO56 tabulated Kc and Kcb. The Kc is the ratio between non-stressed crop evapotranspiration (ETc) and the grass reference evapotranspiration (ETo), while Kcb is the ratio between crop transpiration (Tc) and ETo. The selection and analysis of the literature were performed considering only studies that adhere to the FAO56 method, thus computing ETo with the FAO Penman–Monteith ETo equation, the ASCE grass ETo, or another equation that could be properly related with the former, and ETc, or Tc, was obtained using properly accurate field measurements on crops under pristine or eustress conditions. The crops considered refer to Mediterranean (grapes and olive) and warm temperate areas (avocado, citrus, persimmon, loquat, and tea) fruit and leaf crops. Papers satisfying the above conditions were selected to provide for standard Kc and Kcb data. Preferably, studies should report on the crop cultivar and rootstock, planting density or plant spacing, fraction of ground cover (fc), crop height (h), crop age and training systems. Additional information was collected on pruning and irrigation method and strategy. The ranges of reported Kc and Kcb values were grouped according to crop density in relation with fc, h, and the training system, namely vase, hedgerow, or trellis systems. Literature collected Kc or Kcb values were compared with previously tabulated Kc and Kcb values, namely in FAO56, to define the standard Kc and Kcb values for the referred selected crops. The tabulated values are, therefore, transferable to other locations and aimed for use in crop water requirement computations and modeling, mainly for irrigation planning and scheduling, and for supporting improved water use and saving in orchards and vineyards., The support of the FCT—Fundação para a Ciência e a Tecnologia, I.P., under the project UIDB/04129/2020 of LEAF-Linking Landscape, Environment, Agriculture and Food, Research Unit, and to P. Paredes (DL 57/2016/CP1382/CT0022) are acknowledged, as well as the FAO LoA FAO-ISA-RP- 355071. R. López-Urrea and F. Montoya thank the support from the Education, Culture and Sports Council (JCCM, Spain) (Award numbers SBPLY/21/180501/000070 and SBPLY/21/180501/000152) and the Agencia Estatal de Investigación with FEDER (grant numbers PID2021–123305OB-C31, and PID2020–113498RB-C21), and NextGenerationEU (TED2021–130405B-I00) co-financing. R. López-Urrea also thanks all the support from his former workplace (Instituto Técnico Agronómico Provincial, ITAP) while this study was being carried out., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single and basal crop coefficients for temperate climate fruit trees, vines and shrubs with consideration of fraction of ground cover, height, and training system

  • López-Urrea, Ramón
  • Oliveira, Cristina M.
  • Montoya, F.
  • Paredes, Paula
  • Pereira, Luis S.
The objective of the present review article was to update the standard single (Kc) and basal (Kcb) crop coefficients published in the FAO Irrigation and Drainage Paper No. 56 (FAO56), focusing on temperate climate fruit trees (pome, stone and nut fruit trees), vines and shrubs (kiwi, hop and blue- and blackberries). Standard conditions refer to crops grown in medium to large fields, having enough fetch for non-impeding accurate use of flux measuring equipment to represent non-limiting conditions of crop evapotranspiration, ETc. Moreover, the crop needs to be managed without soil water deficit, free of pests and diseases, and must be able to reach full production under the given environmental conditions. For this purpose, more than 150 articles published over the last 25 years were reviewed. Of these, we selected 76 that refer to case studies that reporting on appropriate yield conditions, describe adequate ETc measurement and adopt the FAO reference evapotranspiration or another method closely related to it. The selection of papers to be analysed followed the same methods as the companion papers on Mediterranean woody fruit crops (Pereira et al. 2023), and on tropical and subtropical ones (Paredes et al. 2024). The literature review focused on articles that are in line with the FAO56 methodology; that is, where the grass reference evapotranspiration (ETo) was computed with the FAO Penman–Monteith ETo, the ASCE Penman–Monteith ETo equations, or other equations whose results relate well to the former. In addition, where the crop evapotranspiration (ETc) and/or crop transpiration (Tc) were determined with sufficient accuracy from field observations in crops grown under standard, well-watered conditions, i.e., under pristine (i.e., non-stress cropping conditions) or eustress (i.e., “good stress”) conditions. Information collected from the selected studies included cultivar and rootstock, plant density and spacing, training system, fraction of ground cover or intercepted PAR radiation, crop height and age. Additional data were gathered on irrigation system and strategy for full or deficit irrigation. The Kc and Kcb values reported were recomputed and grouped according to the degree of ground cover, training system and plant density. Thus, the proposed tabulated standard Kc and Kcb values for initial, mid- and end-season are based on the values obtained from field observations reported in the selected papers, and on the ranges of Kc/Kcb values previously tabulated, mainly in FAO56. The currently tabulated values are updated, with the aim being their use in orchard management. They should consist of the upper limit of Kc/Kcb application, and take into account the general awareness of water scarcity and water conservation, thus helping improve the accuracy in estimating crop water requirements and optimizing irrigation scheduling., R. López-Urrea and F. Montoya are grateful for the support from the Education, Culture and Sports Council (JCCM, Spain) (Award numbers SBPLY/21/180501/000070 and SBPLY/21/180501/000152) and the Agencia Estatal de Investigación with FEDER (grant numbers PID2021–123305OB-C31, and PID2020–113498RB-C21), and NextGenerationEU (TED2021–130405B-I00) co-financing. The study was also funded through an agreement between FAO and the Instituto Superior de Agronomia, Universidade de Lisboa (LoA FAO-ISA-RP- 355071). Finally, this work was supported by national funds through FCT—Fundação para a Ciência e a Tecnologia, I.P., under the project UIDB/04129/2020 of LEAF-Linking Landscape, Environment, Agriculture and Food, Research Unit. R. López-Urrea is grateful for all the support from his former workplace (Instituto Técnico Agronómico Provincial, ITAP, Albacete, Castilla-La Mancha) while this study was being carried out., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ant colony optimization: a bibliometric review

  • Blum, Christian
This paper is a follow-up of one of the most-cited articles published in the first 20 years of the existence of Physics of Life Reviews. The specific topic is “ant colony optimization”, which is a metaheuristic for solving challenging optimization problems. Due to its inspiration from natural ant colonies' shortest path-finding behavior, this optimization technique forms part of a larger field known as swarm intelligence. After a short introduction to ant colony optimization, we first provide a chronology focusing on algorithmic developments rather than applications. The main part of the paper deals with a bibliometric study of the ant colony optimization literature. Interesting trends concerning, for example, the geographic origin of publications and the change in research focus over time, can be learned from the presented graphs and numbers., The research presented in this paper was supported by grants TED2021-129319B-I00 and PID2022-136787NB-I00 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unlocking a Key Residue in a Lipase for Efficient Polyethylene Terephthalate (PET) Hydrolysis and Influencing Depolymerization Product Profiles

  • Vidal Ramón, Paula
  • Robles-Martín, Ana
  • Fernández-López, Laura
  • González-Alfonso, José L.
  • Almendral, David
  • Muñoz Tafalla, Rubén
  • Plou Gasca, Francisco José
  • Guallar, Víctor
  • Ferrer, Manuel
Polyethylene terephthalate (PET) pollution is a global challenge. Advancing the bioprospecting of PET-degrading enzymes through metagenomics and using computational and functional methods to identify key positions influencing the catalytic rate and selectivity are part of the solution. Here, we report PETase activity in the metagenomic lipase LipMRD9, which exhibits peak activity at 30 °C and pH 9.0 and has a denaturation temperature of 42 °C. In addition to acting on long-chain triglycerides (up to ∼13 units (U)/mg, pH 8.0, 30 °C) and a wide range of 34 other esters (up to ∼228 U/g), LipMRD9 hydrolyses mono(2-hydroxyethyl) terephthalate (∼57 U/g) and bis(2-hydroxyethyl) terephthalate (∼131 U/g). It also efficiently deconstructs GoodFellow amorphous submicro- and nanosized PET particles (∼984/2238 μM degradation products at 30/40 °C, pH 7.0, 21.5 h) and films (∼112/198 μM degradation products at 30/40 °C, pH 7.0, 7 days). Through molecular modelling and experimental analysis, the active site of LipMRD9 was revealed, identifying a key residue contributing to its PETase activity compared with those of its closest homologues. This residue plays a crucial role in determining the distinct profiles of degradation products from PET hydrolysis and should be studied in other PETases for its influence on the catalytic process., This study was conducted under the auspices of the FuturEnzyme Project, funded by the European Union's Horizon 2020 Research and Innovation Program (grant agreement no. 101000327), and the Horizon Europe Research and Innovation Program (Nymphe project, grant agreement no. GA101060625). We also acknowledge financial support under grants PID2020-112758RB-I00 (M.F.), PDC2021-121534-I00 (M.F.), TED2021–130544B-I00 (M.F.), PID2019-106370RB-I00 (V.G.) and PID2022-136367OB-C31 (F.J.P.) from the Ministerio de Ciencia, Innovación y Universidades, Agencia Estatal de Investigación (AEI) (Digital Object Identifier MCIN/AEI/10.13039/501100011033), Fondo Europeo de Desarrollo Regional (ERDF) A way of making Europe and the European Union NextGenerationEU/PRTR). A.R.-M. thanks the Spanish Ministry of Science and Innovation for a PhD fellowship (PRE2020-091825)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Market as a factor in soil erosion: the expansion of new and old crops into marginal Mediterranean lands

  • Nadal-Romero, Estela
  • García-Ruiz, José María
The expansion of international markets for some agricultural products explains the growth in marginal areas of the surface occupied by subtropical crops (especially avocado and mango) and the rapid penetration of pistachio plantations in the Mediterranean regions of the world. The traditional Mediterranean crops (vineyards, and olive and almond orchards) have also experienced remarkable locational changes. In most cases, this expansion has taken place towards marginal slopes, generally very steep, many of them cultivated decades ago and already abandoned. The consequence is an increased risk of erosion, which can only be counteracted by planting herbaceous plants or native shrubs between the rows of trees. Thus, changes in international markets for agricultural products can have important environmental consequences in terms of runoff generation and sediment yield, as well as disturbances in the spatial organization of rural landscapes., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This research was supported by the MANMOUNT project (PID2019-105983RB-100/AEI/https://doi.org/10.13039/501100011033) funded by the MICINN-FEDER, and the MOUNTWATER project (TED2021-131982B-I00 MCIN/AEI/https://doi.org/10.13039/501100011033) funded by the MICCN and NextGeneration EU/PRTR. The “Geoenvironmental Processes and Global Change” (E02_17E) research group was financed by the Aragón Government and the European Social Fund (ESF-FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The importance of tropical tree-ring chronologies for global change research

  • Groenendijk, Peter
  • Babst, Flurin
  • Trouet, Valerie
  • Fan, Ze Xin
  • Granato-Souza, Daniela
  • Locosselli, Giuliano Maselli
  • Mokria, Mulugeta
  • Panthi, Shankar
  • Pumijumnong, Nathsuda
  • Abiyu, Abrham
  • Acuña-Soto, Rodolfo
  • Adenesky-Filho, Eduardo
  • Alfaro-Sánchez, Raquel
  • Anholetto Junior, Claudio Roberto
  • Aragão, José Roberto Vieira
  • Assis-Pereira, Gabriel
  • Astudillo-Sánchez, Claudia C.
  • Carolina Barbosa, Ana
  • Barreto, Nathan de Oliveira
  • Battipaglia, Giovanna
  • Beeckman, Hans
  • Botosso, Paulo Cesar
  • Bourland, Nils
  • Bräuning, Achim
  • Brienen, Roel
  • Brookhouse, Matthew
  • Buajan, Supaporn
  • Buckley, Brendan M.
  • Camarero, Jesús Julio
  • Carrillo-Parra, Artemio
  • Ceccantini, Gregório
  • Centeno-Erguera, Librado R.
  • Cerano-Paredes, Julián
  • Cervantes-Martínez, Rosalinda
  • Chanthorn, Wirong
  • Chen, Ya Jun
  • Cintra, Bruno Barçante Ladvocat
  • Cornejo-Oviedo, Eladio Heriberto
  • Cortés-Cortés, Otoniel
  • Costa, Clayane Matos
  • Couralet, Camille
  • Crispin-DelaCruz, Doris Bianca
  • D'Arrigo, Rosanne
  • David, Diego A.
  • De Ridder, Maaike
  • Del Valle, Jorge Ignacio
  • Díaz-Carrillo, Oscar A.
  • Dobner, Mário
  • Doucet, Jean Louis
  • Dünisch, Oliver
  • Enquist, Brian J.
  • Esemann-Quadros, Karin
  • Esquivel-Arriaga, Gerardo
  • Fayolle, Adeline
  • Fenilli, Tatiele Anete Bergamo
  • Ferrero, M. Eugenia
  • Fichtler, Esther
  • Finnegan, Patrick M.
  • Fontana, Claudia
  • Francisco, Kainana S.
  • Fu, Pei Li
  • Galvão, Franklin
  • Gebrekirstos, Aster
  • Giraldo, Jorge A.
  • Gloor, Emanuel
  • Godoy-Veiga, Milena
  • Guerra, Anthony
  • Haneca, Kristof
  • Harley, Grant Logan
  • Heinrich, Ingo
  • Helle, Gerhard
  • Hernández-Díaz, José Ciro
  • Hornink, Bruna
  • Hubau, Wannes
  • Inga, Janet G.
  • Islam, Mahmuda
  • Jiang, Yu mei
  • Kaib, Mark
  • Hassan Khamisi, Zakia
  • Koprowski, Marcin
  • Layme, Eva
  • Leffler, A. Joshua
  • Ligot, Gauthier
  • Lisi, Claudio Sergio
  • Loader, Neil J.
  • Lobo, Francisco de Almeida
  • Longhi-Santos, Tomaz
  • Lopez, Lidio
  • López-Hernández, María I.
  • Lousada, José Luís Penetra Cerveira
  • Manzanedo, Rubén D.
  • Marcon, Amanda K.
  • Maxwell, Justin T.
  • Mendivelso, Hooz A.
  • Mendoza-Villa, Omar N.
  • Menezes, Ítallo Romany Nunes
  • Montóia, Valdinez Ribeiro
  • Moors, Eddy
  • Moreno, Miyer
  • Muñiz-Castro, Miguel Angel
A large share of the raw tree-ring data (99 chronologies) have previously been uploaded to the International Tree-Ring Data Bank - ITRDB (https://www.ncei.noaa.gov/products/paleoclimatology/tree-ring) following Zuidema et al. 2022. We are processing the remaining datasets to also be uploaded to the ITRDB. Analysis scripts will be made available via the main author's Github page: https://github.com/groenendijk., Tropical forests and woodlands are key components of the global carbon and water cycles. Yet, how climate change affects these biogeochemical cycles is poorly understood because of scarce long-term observations of tropical tree growth. The recent rise in tropical tree-ring studies may help to fill this gap, but a large-scale quantitative analysis of their potential in global change research is missing. We compiled a list of all tropical tree species known to form annual tree rings and built a network encompassing 492 tropical ring-width chronologies to evaluate the potential to generate insights on climate sensitivity of woody productivity and to build centuries-long reconstructions of climate variability. We assess chronology quality, length, and climatic representativeness and explore how these change along climatic gradients. Finally, we applied species-distribution modeling to identify regions with potential for tree-ring studies in ecological and climatic studies. The number of tropical chronologies has rapidly increased, with ∼400 added over the past two decades. Yet, tree-ring studies are biased towards high-elevation locations, with gaps in warmer and wetter climates, on the African continent, and for angiosperm species. The longest chronologies with strongest climate signals (i.e., synchronous growth variations among trees) are from cool regions. In wet regions, climate signals and precipitation sensitivity decrease. Most tropical regions harbor 5–15 (and up to 80) species with proven potential to generate chronologies. The potential for long climate reconstructions is particularly high in drier high elevation sites. Our findings support strategies to effectively expand tree-ring research in the tropics, by targeting specific species and regions. Tropical dendrochronology can importantly contribute to global change research by generating historical context of climate extremes, quantifying climate sensitivity of woody productivity and benchmarking vegetation models., AECID grant 11-CAP2-1730 (JJC & HM) Agencia Nacional de Promoción Científica y Tecnológica, Argentina grant PICT 2014-2797 (MEF) Agencia Nacional de Promoción Científica y Tecnológica, Argentina grant PICT 2019-01336 (MEF) BBVA Foundation (JJC & HM) Belspo BRAIN grant BR/143/A3/HERBAXYLAREDD (HB) CAPES - Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (TLS & EAF) CAPES grant 88887.199858/2018-00 (GAP) CAPES grant 88887.495294/2020-00 (BH) CAPES/PDSE grant 15011/13-5 (MAP) CGIAR (MM) CNPq (CRA, FG, CSL, FAL, ASR) CNPq 140849/2015-7 (AKM) CNPq ENV grant FRG 0339638 (OD) CNPq grant 1009/4785031-2 (GC) CNPq grant 140277/2024-2 (DBCC) CNPq grant 311247/2021-0 (JS) CNPq grant 405923/2021-0 (MCS) CNPq grant 406062/2023-4 (MCS) CNPq grant 441811/2020-5 (JS) CNPq grant PQ 313129/2022-3 (ACB) CONACYT Consejo Nacional de Ciencia y Tecnología México. Master fellowship (MILH) CONACYT Consejo Nacional de Ciencia y Tecnología México grant CB2016-283134 (JVD & LRCE) CONAFOR-CONACYT grant C01-234547 (JCP) CONAFOR-CONACYT grant CONAFOR-2014 (LRCE) CONCYTEC Peru & World Bank grants FONDECYT-BM-INC.INV 043-2019 (to JGI) and BM-INC.INV 039–2019 (to MEF) CONICET (FAR) CONICET grant PIP-11220200102929CO (MEF) Copel Geração e Transmisão S.A. grant PD-06491-0405-2015 (AKM) CUOMO Foundation (MM) German Academic Exchange Service (DAAD) (MR & MI) Deutsche Forschungsgemeinschaft (DFG) (AA) DFG grant BR 1895/15-1 (AB) DFG grant BR 1895/23-1 (AB) DFG grant BR 1895/29-1 (AB) Dirección de Investigación de la Universidad Nacional de Loja (DPC) Dirección General de Asuntos del Personal Académico of the UNAM (Mexico) (RB) Estudios dendrocronológicos en las Sierras Madre Occidental, Oriental y del Sur de México, grant 38111-4251030012346 (ECO) FACEPE grant IBPG-1418-5.00/21 (DBCC) FAPEAM grant 01.02.016301.02630/2022-76 (JS) FAPEMAT (FAL) FAPEMIG grant APQ-01544-22 (ACB) FAPEMIG grant APQ-02541-14 (GAP) FAPESC grant 2019TR65 (TABF) FAPESP grant 2012/50457-4 (GC) FAPESP grant 2009/53951-7 (MTF) FAPESP grant 2018/01847-0 (PG) FAPESP grant 2018/07632-6 (MGV) FAPESP grant 2018/22914-8 (DROR & NB) FAPESP grant 2019/08783-0 (GML) FAPESP grant 2019/09813-0 (MGV) FAPESP grant 2020/04608-7 (DROR) FAPESP grant 2019/26350-4 (NB) FAPESP-NERC grant 2018/50080-4 (GC) FAPITEC (CSL & ASR) FAPITEC/SE/FUNTEC grant 01/2011 (MAP) FCT - Portuguese Foundation for Science and Technology grant UIDB/04033/2020 (JLPCL) FONDECYT grant BM-INC.INV 039–2019 (MEF) Fulbright Fellowship (BJE) German Research Council (MM) HELVETAS Swiss Intercooperation (MEF) IAI-SGP-CRA grant 2047 (JVD) IFS grant D/5466-1 (JHS & JN) Inter-American Institute for Global Change Research IAI (FAR) ITTO Fellowship Award grant 046/12S (EJRR) Lamont Climate Center (BMB) Mahidol University grant FRB660042/0185 (NP) María Zambrano postdoctoral research program MZ2021 (RaAS) Colciencias grant 1118-714-51372 (IRNM) Ministerio Ciencia grant TED2021-129770B-C22 (RSS) National Geographic Global Exploration Fund grant GEFNE80-13 (IR) National Natural Science Foundation of China grant 31870591 (PF) National Research Council of Thailand (NRCT) grant N42A660392 (PT) NSF grant AGS-1501321 (DGS & GAP) NSF (BMB) NSF CREST grant 0833211 (KSF) NSF grant IBN-9801287 (AJL) NSF grant AGS-2102888 (JM) NSF grant AGS-2102938 (GLH) NSF grant GER-9553623 (BJE) NSF Postdoctoral Fellowship (BJE) NSF-FAPESP PIRE grant 2017/50085-3 (CF, MTF, GC, GML, MGV & DROR) NSF-FAPESP PIRE grant 2019/27110-7 (CF) NUFFIC (JHS & JN) NUFFIC-NICHE (EM) PROCAD-AM grant 88887.625854/2021-00 (BH) Agencia Estatal de Investigación – Spain, Proyectos de generacion de conocimiento grant PID2021-123675OB-C44 (RSS) Schlumberger Foundation (JHS & JN) Short-term fellowship from the Smithsonian Tropical Research Institute (RaAS) Sigma Xi (AJL) Spanish Agency for International Development Cooperation (KPV) Thailand Science Research and Innovation Fund Chulalongkorn University (PT) The Copperbelt University (JHS & JN) Instituto Nacional de Ciência e Tecnologia em Fisiologia de Plantas em Condições de Estresse (INCT Fisiologia do Estresse) grant 406455/2022-8 (FAL) UK NERC grant NE/K01353X/1 (EG) UKRI grant EP/X025098/1 (NJL) UKRI grant NE/B501504 (NJL) UNAM-PAPIIT grant IN110223 (LVS) Universidad Autónoma Agraria Antonio Narro (ECO) World Wildlife Fund (WWF) (KPV) Xunta de Galicia grant ED431C 2023/19 (GPL) Xunta de Galicia grant ED481D 2023/012 (GPL), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic Nanoparticles and Radio Frequency Induction: From Specific Heating to Magnetically Induced Catalysis

  • Mazarío, Jaime
  • Ghosh, Sourav
  • Varela-Izquierdo, Víctor
  • Martínez-Prieto, Luis M.
  • Chaudret, Bruno
This comprehensive review explores the potential of radio frequency (RF) induction heating in chemical reactions, explicitly focusing on magnetically induced catalysis using magnetic nanoparticles (NPs). We trace the recent historical progress of induction heating and highlight the advancements in liquid and gas-phase reactions, particularly in its integration with heterogeneous catalysis. The review finds that induction heating profoundly impacts reaction kinetics, and selectivity, and can even reduce overpotentials in electrocatalytic processes. A final outlook unveils the challenges and opportunities associated with aspects such as fundamental research and reactor design, with a particular focus on expanding its use to higher pressures and necessary optimizations to improve energy efficiency. Moreover, it highlights the pressing need for standardized reporting in induction-heated catalysis. The study underscores the significance of this brand-new field in developing efficient and sustainable catalytic processes, which are essential for meeting the growing demand for clean energy and sustainable chemical production., The authors thank Instituto de Investigaciones Químicas (IIQ), Consejo Superior de Investigaciones Científicas (CSIC), Universidad de Sevilla (US), CNRS, UPS-Toulouse and INSA. The authors also acknowledge Junta de Andalucía (ProyExcel_00706) for financial support. Grants PID2021-126080OA-I00, TED2021-132087A-I00, and CNS2023-145078 funded by MICIU/AEI/10.13039/501100011033 and by “ERDF/EU” and “European Union NextGenerationEU/PRTR”. The authors would like to acknowledge the funding from the ECOCHEM and POWERCO2 PEPR-Spleen projects. Jaime Mazario acknowledges his MSCA individual postdoctoral fellowship from the Horizon Europe research and innovation program (Project 101109254 – BIOCATMAG) for funding. The authors extend their gratitude to J. Carrey and S. Daccache for providing valuable advice and engaging in productive discussions regarding magnetism. Institute and/or researcher Twitter usernames: @fisco51; @IIQ_US_CSIC; and @LPCNO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Plasma catalysis for gas conversion – Impact of catalyst on the plasma behavior

  • Ruiz-Martín, M.
  • Oliva-Ramírez, M.
  • González-Elipe, Agustín R.
  • Gómez-Ramírez, Ana
How does a catalyst influence plasma behavior? What is the true role of a catalyst in a plasma environment? The observed synergies in plasma–catalysis processes have been usually attributed to conventional surface catalytic interactions. However, recent studies demonstrate that metallic catalysts may induce alterations in plasma behavior that substantially influence the overall process efficiency. This work reviews the latest advances in the field, proposing the term Plasma-Catalysis Promoter (PCP) to designate compounds that facilitate reactions not only at the catalyst surface but also within the plasma phase. It also highlights that advancing in the field requires a holistic approach capable of unraveling the multifunctional role of PCPs in plasma–catalysis processes., Authors acknowledge projects PID2020-114270RA-I00, PID2023-147916NAI00, and PID2020-112620GB-I00 funded by MICIU/AEI/10.13039/501100011033 and project TED2021-130124 A-I00 funded by AEI/10.13039/501100011033/Unión Europea Next Generation EU/PRTR. M. Oliva-Ramírez acknowledges financial support from Grant IJC2020-045087-I funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGeneration EU/PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advances in Hybrid Icing and Frosting Protection Strategies for Optics, Lens, and Photonics in Cold Environments Using Thin-Film Acoustic Waves

  • Ong, Hui Ling
  • Ji, Zhangbin
  • Haworth, Luke
  • Guo, Yihao
  • del Moral, Jaime
  • Jacob, Stefan
  • Borrás, Ana
  • González-Elipe, Agustín R.
  • Zhang, Jikai
  • Zhou, Jian
  • McHale, Glen
  • Fu, Yong Qing
Fogging, icing, or frosting on optical lenses, optics/photonics, windshields, vehicle/airplane windows, and solar panel surfaces have often shown serious safety concerns with hazardous conditions and impaired sight. Various active techniques, such as resistive heating, and passive techniques, such as icephobic treatments, are widely employed for their prevention and elimination. However, these methods are not always suitable, effective, or efficient. This review provides a comprehensive overview of the fundamentals and recent advances of transparent thin-film surface acoustic wave (SAW) technologies on glass substrates for monitoring and prevention/elimination of fogging, frosting, and icing. Key challenges related to fogging and icing on glass substrates are discussed, along with fundamental mechanisms that establish thin-film SAWs as optimal solution for these issues. Various types of thin-film acoustic wave technologies are discussed, including recent wearable and flexible SAW devices integrated onto glass substrates for expanding future applications. The focus of this review is on the principles and strategies for hybrid or integrated de-fogging/de-icing and sensing/monitoring functions. Finally, critical issues and future outlooks for thin-film-based SAW technology on glass substrates in industry applications are presented., This work was supported by the UK Fluids Network Special Interest Group of Acoustofluidics (EP/N032861/1), EPSRC Centre for Doctoral Training in Renewable Energy Northeast Universities (ReNU) for funding through grant EP/S023836/1, International Exchange Grant (IEC/NSFC/201078) through Royal Society and the Natural Science Foundation of China (NSFC), the EU H2020 program under grant agreement 899352 (FETOPEN-01-2018-2019-2020 – SOUNDofICE), PID2022-143120OB-I00, PCI2024-153451 (m-era.net 3, GA 958174), and TED2021-130916B-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER),” A way of making Europe, Fondos NextgenerationEU, and Plan de Recuperación, Transformación y Resiliencia.”, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dual photoacoustic/ultrasound technologies for preclinical research: current status and future trends

  • Pérez-Liva, Mailyn
  • Alonso de Leciñana, María
  • Gutiérrez-Fernández, María
  • Camacho Sosa-Días, Jorge
  • Fernández Cruza, Jorge
  • Rodríguez-Pardo, Jorge
  • García-Suárez, Iván
  • Laso-García, Fernando
  • L. Herraiz, Joaquín
  • Elvira Segura, Luis
30 páginas, 6 figuras, 2 tablas., Photoacoustic (PA) imaging, by integrating optical and ultrasound (US) modalities, combines high spatial resolution with deep tissue penetration, making it a transformative tool in biomedical research. This review presents a comprehensive analysis of the current status of dual PA/US imaging technologies, emphasising their applications in preclinical research. It details advancements in light excitation strategies, including tomographic and microscopic modalities, innovations in pulsed laser and alternative light sources, and US instrumentation. The review further explores preclinical methodologies, encompassing dedicated instrumentation, signal processing, and data analysis techniques essential for PA/US systems. Key applications discussed include the visualisation of blood vessels, micro-circulation, and tissue perfusion; diagnosis and monitoring of inflammation; evaluation of infections, atherosclerosis, burn injuries, healing, and scar formation; assessment of liver and renal diseases; monitoring of epilepsy and neurodegenerative conditions; studies on brain disorders and preeclampsia; cell therapy monitoring; and tumour detection, staging, and recurrence monitoring. Challenges related to imaging depth, resolution, cost, and the translation of contrast agents to clinical practice are analysed, alongside advancements in high-speed acquisition, artificial intelligence-driven reconstruction, and innovative light-delivery methods. While clinical translation remains complex, this review underscores the crucial role of preclinical studies in unravelling fundamental biomedical questions and assessing novel imaging strategies. Ultimately, this review delves into the future trends of dual PA/US imaging, highlighting its potential to bridge preclinical discoveries with clinical applications and drive advances in diagnostics, therapeutic monitoring, and personalised medicine., The work of Mailyn Pérez-Liva was supported in part by the Program Ramón y Cajal under Grant RYC2021-032739-I, MCIN/AEI/10.13039/501100011033, by the European Union ‘NextGenerationEU’/PRTR and by INVENTOR PID2022-137114OA-I00. Joaquin L Herraiz acknowledges support from TED2021-130592B-I00 funded by MCIN/AEI/10.13039/501100011033 and TARTAGLIA MIA.2021.M02.0005, funded by the Spanish Ministry of EADT, with funds nextGenerationEU/PRTR. Luis Elvira was supported by PID2022-138013OB-I00/ AEI/10.13039/501100011033/FEDER. María Gutiérrez-Fernández was supported by the Program Miguel Servet under Grant CPII20/00002, Carlos III Health Institute (ISCIII). Fernando Laso-García was supported by the Spanish Ministry of Health- (ISCIII) under Grant FI18/00026., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polysaccharides: The Sustainable Foreground in Energy Storage Systems

  • Thomas, Sharin Maria
  • Gómez-Romero, P.
  • González-Gil, Rosa M.
Polysaccharides offer a perfect option as raw materials for the development of a new generation of sustainable batteries and supercapacitors. This is due to their abundance and inherent structural characteristics. Polysaccharides can be chemically functionalized and engineered, offering a wide range of possibilities as electrode materials (as precursors of porous nanocarbons), binders and separators. Their hierarchical morphology also enables their exploitation as aerogel and hydrogel structures for quasi-solid and solid polymer electrolytes with high conductivity and wide voltage stability windows. In this review, we discuss how different polysaccharides, such as lignocellulosic biomass, starch, chitosan, natural gums, sugars and marine polysaccharides, can be applied in different components of energy storage systems (ESSs). An overview of the recent research work adhering to each functionality of different polysaccharides in various storage systems is provided., This research was funded by Ministerio de Ciencia Innovacion y Universidades (MCIU), Agencia Estatal de Investigación (AEI) and the European Regional Development Fund (FEDER) (grants PID2021-128390OB-I00, TED2021-130205B-C21, and PLEC2022-009328). The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, grant CEX2021-001214-S, funded by MCIU/AEI/10.13039.501100011033. The ICN2 is also funded by the CERCA programme/Generalitat de Catalunya. This work has been carried out within the framework of the doctoral program (PhD) of Material Science (Department of Physics) of Universitat Autònoma de Barcelona (UAB) and supported by the grant PRE2021-097210 from the call Ayudas para contratos predoctorales para la formación de doctores/as 2021 from the Agencia Estatal de Investigación, with the support of the Severo Ochoa Centres of Excellente programme, grant CEX2021-001214-S funded by MCIU/AEI/10.13039/501100011033 and FSE+., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Breeding Alnus species for resistance to Phytophthora disease in the Iberian Peninsula

  • Cordeiro, Daniela
  • Pizarro, Alberto
  • Vélez, M. Dolores
  • Guevara, M. Ángeles
  • María, Nuria de
  • Ramos, Paula
  • Cobo-Simón, Irene
  • Diez-Galán, Alba
  • Benavente, Alfredo
  • Ferreira, Verónica
  • Martín, M Ángela
  • Rodríguez-González, Patricia M.
  • Solla, Alejandro
  • Cervera, María Teresa
  • Diez-Casero, Julio Javier
  • Cabezas, José Antonio
  • Díaz-Sala, Carmen
Alders are widely distributed riparian trees in Europe, North Africa and Western Asia. Recently, a strong reduction of alder stands has been detected in Europe due to infection by Phytophthora species (Stramenopila kingdom). This infection causes a disease known as alder dieback, characterized by leaf yellowing, dieback of branches, increased fruit production, and bark necrosis in the collar and basal part of the stem. In the Iberian Peninsula, the drastic alder decline has been confirmed in the Spanish Ulla and Ebro basins, the Portuguese Mondego and Sado basins and the Northern and Western transboundary hydrographic basins of Miño and Sil, Limia, Douro and Tagus. The damaging effects of alder decline require management solutions that promote forest resilience while keeping genetic diversity. Breeding programs involve phenotypic selection of asymptomatic individuals in populations where severe damage is observed, confirmation of tree resistance via inoculation trials under controlled conditions, vegetative propagation of selected trees, further planting and assessment in areas with high disease pressure and different environmental conditions and conservation of germplasm of tolerant genotypes for reforestation. In this way, forest biotechnology provides essential tools for the conservation and sustainable management of forest genetic resources, including material characterization for tolerance, propagation for conservation purposes, and genetic resource traceability, as well as identification and characterization of Phytophthora species. The advancement of biotechnological techniques enables improved monitoring and management of natural resources by studying genetic variability and function through molecular biology methods. In addition, in vitro culture techniques make possible large-scale plant propagation and long-term conservation within breeding programs to preserve selected outstanding genotypes., The author(s) declare financial support was received for the research, authorship, and/or publication of this article. This work has been funded by MCIN/AEI/10.13039/501100011033/European Union “NextGenerationEU”/PRTR (TED2021-130790B-C31 and TED2021-130790B-C32), by Junta de Comunidades de Castilla-La Mancha/EU-FEDER (SBPLY/21/180501/000258), by the Directorate General of Biodiversity Forest and Desertification from the Ministry for the Ecological Transition and the Demographic Challenge through the National Rural Development Program 2014-2020 which is co-financed by 75% from the European Agricultural Fund for Rural Development (FEADER) and by the Portuguese Foundation for Science and Technology (Forest Research Centre by UIDP/00239/2020 and UIDB/00239/2020; Associate Laboratory TERRA by LA/P/0092/2020; MARE by UIDP/04292/2020 and UIDB/04292/2020, ARNET by LA/P/0069/2020, and VF by CEECIND/02484/2018)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The German cockroach as a model in insect development and reproduction in an endocrine context

  • Bellés, Xavier
  • Maestro, José L.
  • Piulachs, Maria-Dolors
Biology requires comparisons between species to infer general concepts. In insects, most of the information comes from a few species, notably from the fly Drosophila melanogaster. Here, we propose the German cockroach, Blattella germanica, as a model for comparative studies, given the abundant information available on its biology. Most data refer to development and reproduction in an endocrine context. This review is based, therefore, on those topics. The main hormones involved and their functions are described, from juvenile hormones and ecdysteroids to peptide hormones, such as allatostatins, orcokinins, and insulin-like peptides. Two types of non-coding RNAs, namely miRNAs and piRNAs, are also commented regarding identification and biological functions. Concerning development, we review data on embryogenesis, nymphal growth, molting, wing morphogenesis, and metamorphosis. About reproduction, after describing the reproductive system, we review the most important functional processes, with emphasis on oogenesis, vitellogenesis, and choriogenesis. The data available has been obtained with diverse tools and resources. Thus, the sequenced genome, systems to measure the most important hormones, RNAi and CRISPR methodologies, several mRNA and ncRNA libraries, and a cell line are available to work with B. germanica., The work was supported by the Spanish Agencia Estatal de Investigación (grants number TED2021-130489B-I00; PID2021-122316OBI00 from the MCIN/AEI/10.13039/501100011033 and by ERDF, a way of making Europe; PID2019-104483GB-I00/AEI/10.13039/501100011033 and CGL2016-76011-R), the Catalan Government (2021 SGR 00419), and the European Fund for Economic and Regional Development (FEDER funds)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Technology Roadmap of Micro/Nanorobots

  • Ju, Xiaohui
  • Chen, Chuanrui
  • Oral, Cagatay M.
  • Sevim, Semih
  • Golestanian, Ramin
  • Sun, Mengmeng
  • Bouzari, Negin
  • Lin, Xiankun
  • Urso, Mario
  • Nam, Jong Seok
  • Cho, Yujang
  • Peng, Xia
  • Landers, Fabian C.
  • Yang, Shihao
  • Adibi, Azin
  • Taz, Nahid
  • Wittkowski, Raphael
  • Ahmed, Daniel
  • Wang, Wei
  • Magdanz, Veronika
  • Medina-Sánchez, Mariana
  • Guix, María
  • Bari, Naimat
  • Behkam, Bahareh
  • Kapral, Raymond
  • Huang, Yaxin
  • Tang, Jinyao
  • Wang, Ben
  • Morozov, Konstantin
  • Leshansky, Alexander
  • Abbasi, Sarmad Ahmad
  • Choi, Hongsoo
  • Ghosh, Subhadip
  • Borges Fernandes, Bárbara
  • Battaglia, Giuseppe
  • Fischer, Peer
  • Ghosh, Ambarish
  • Jurado Sánchez, Beatriz
  • Escarpa, Alberto
  • Martinet, Quentin
  • Palacci, Jérémie
  • Lauga, Eric
  • Moran, Jeffrey
  • Ramos, Miguel A.
  • Städler, Brigitte
  • Herrera Restrepo, Ramón Santiago
  • Yossifon, Gilad
  • Nicholas, James D.
  • Ignés-Mullol, Jordi
  • Puigmartí Luis, Josep
  • Liu, Yutong
  • Zarzar, Lauren D.
  • Shields, C. Wyatt
  • Li, Longqiu
  • Li, Shanshan
  • Ma, Xing
  • Gracias, David H.
  • Velev, Orlin
  • Sánchez, Samuel
  • Esplandiú, María J.
  • Simmchen, Juliane
  • Lobosco, Antonio
  • Misra, Sarthak
  • Wu, Zhiguang
  • Li, Jinxing
  • Kuhn, Alexander
  • Nourhani, Amir
  • Maric, Tijana
  • Xiong, Ze
  • Aghakhani, Amirreza
  • Mei, Yongfeng
  • Tu, Yingfeng
  • Peng, Fei
  • Diller, Eric
  • Sakar, Mahmut Selman
  • Sen, Ayusman
  • Law, Junhui
  • Sun, Yu
  • Pena-Francesch, Abdon
  • Villa, Katherine
  • Li, Huaizhi
  • Fan, Donglei Emma
  • Liang, Kang
  • Huang, Tony Jun
  • Chen, Xiang-Zhong
  • Tang, Songsong
  • Zhang, Xueji
  • Cui, Jizhai
  • Wang, Hong
  • Gao, Wei
  • Kumar Bandari, Vineeth
  • Schmidt, Oliver G.
  • Wu, Xianghua
  • Guan, Jianguo
  • Sitti, Metin
  • Nelson, Bradley J.
  • Pané, Salvador
  • Zhang, Li
  • Shahsavan, Hamed
  • He, Qiang
  • Kim, Il-Doo
  • Wang, Joseph
  • Pumera, Martin
Inspired by Richard Feynman's 1959 lecture and the 1966 film Fantastic Voyage, the field of micro/nanorobots has evolved from science fiction to reality, with significant advancements in biomedical and environmental applications. Despite the rapid progress, the deployment of functional micro/nanorobots remains limited. This review of the technology roadmap identifies key challenges hindering their widespread use, focusing on propulsion mechanisms, fundamental theoretical aspects, collective behavior, material design, and embodied intelligence. We explore the current state of micro/nanorobot technology, with an emphasis on applications in biomedicine, environmental remediation, analytical sensing, and other industrial technological aspects. Additionally, we analyze issues related to scaling up production, commercialization, and regulatory frameworks that are crucial for transitioning from research to practical applications. We also emphasize the need for interdisciplinary collaboration to address both technical and nontechnical challenges, such as sustainability, ethics, and business considerations. Finally, we propose a roadmap for future research to accelerate the development of micro/nanorobots, positioning them as essential tools for addressing grand challenges and enhancing the quality of life., The content is solely the responsibility of the authors and does not necessarily represent the official views of the funding agencies. Martin Pumera acknowledges the financial support of Grant Agency of the Czech Republic (EXPRO: 25-15484X). Xiaohui Ju, Xia Peng and Cagatay M. Oral acknowledge ERDF/ESF project TECHSCALE (No. CZ.02.01.01/00/22_008/0004587) for financial support. Xiaohui Ju acknowledges the financial support from Czech Grant Agency GACR standard grant No. 25-15996S. Salvador Pane, Fabian Landers and Semih Sevim acknowledge funding from the European Union's Horizon 2020 Proactive Open program under FETPROACT-EIC-05-2019 ANGIE (No. 952152) and the European Union’s Horizon Europe Research and Innovation Programme under the EVA project (GA no. 101047081).Li Zhang acknowledges funding support from the Hong Kong Research Grants Council (RGC) with grant numbers R4015-2, RFS2122-4S03, and STG1/E-401/23-N. Hamed Shahsavan acknowledges Natural Sciences and Engineering Research Council of Canada (NSERC). Cagatay M. Oral and Hamed Shahsavan were in part funded by the WIN-CEITEC BUT Joint Seed Funding Program. Qiang He and Xiankun Lin acknowledge the National Natural Science Foundation of China (22193033, U22A20346) and Heilongjiang Provincial Key R&D Program (2022ZX02C23) for providing financial support. Il-Doo Kim acknowledges the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) (No. RS-2024-00435493). Ramin Golestanian acknowledges support from the Max Planck School Matter to Life and the MaxSynBio Consortium which are jointly funded by the Federal Ministry of Education and Research (BMBF) of Germany and the Max Planck Society. Bradley J. Nelson and Semih Sevim acknowledge funding from the Swiss National Science Foundation under SNSF-Sinergia project no. 198643. Raphael Wittkowski is funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) − 535275785. Daniel Ahmed acknowledges the support provided by the European Research Council, as part of the European Union’s Horizon 2020 research and innovation program (grant agreement 853309, SONOBOTS) and Swiss National Science Foundation (SNSF) under the SNSF Project funding MINT 2022 grant agreement No. 213058. Daniel Ahmed also extends thanks to Zhiyuan Zhang, Mahmoud Medany, and Prajwal Agrawal for helpful discussions. Wei Wang acknowledges the National Natural Science Foundation of China (T2322006) and the Shenzhen Science and Technology Program (RCYX20210609103122038). Mariana Medina-Sánchez acknowledges the financial support received from the European Union’s Horizon 2020 research and innovation program (ERC Starting Grant Nr. 853609), the HORIZON-MSCA-2022-COFUND-101126600-SmartBRAIN3, and the Grant PID2023-148899OA-I00 funded by MICIU/AEI/ 10.13039/501100011033. Maria Guix acknowledges the financial support from the Spanish Ministry of Science (grants RYC2020-945030119-I and PID2023-151682NA-I00 funded by MCIN/ AEI /10.13039/501100011033/ and FEDER) and Unidades de Excelencia María de Maeztu 2021 CEX2021-001202-M. Bahareh Behkam and Naimat Kalim Bari acknowledge support from the National Science Foundation (CBET-2318093). Naimat Kalim Bari also gratefully acknowledges financial support from the Virginia Tech Presidential Postdoctoral Fellowship. Raymond Kapral acknowledges the Natural Sciences and Engineering Research Council of Canada. Giuseppe Battaglia, Subhadip Ghosh and Bárbara Borges Fernandes thank the European Research Council ChessTaG grant 769798 (G.B.); Ministry of Science and Innovation of Spain, Proyectos I+D+I PID2020-119914RBI00 and Proyectos I+D+I PID2023-149206OB-I00 and the Agencia de Gestión de Ayudas Universitarias y de Investigación (AGAUR) for the grant SGR 01538 and for SG fellowship (2022 BP 00214). Alexander Leshansky and Konstantin Morozov acknowledge the support of the Israel Science Foundation (ISF) via grant no. 2899/21. Alberto Escarpa and Beatriz Jurado Sánchez acknowledge support from The Spanish Ministry of Science, Innovation and Universities [Grant PID2023-152298NB-I00 funded by MCIN/AEI/10.13039/501100011033 and FEDER, UE (A.E, B. J. S), grant TED2021-132720B-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR (A.E, B. J. S); grant CNS2023-144653 funded by MCIN/AEI/10.13039/ 501100011033 and the European Union “NextGenerationEU”/PRTR] and Junta de Comunidades de Castilla la Mancha (grant number SBPLY/23/180225/000058). Jeremie Palacci acknowledges support from the European Union through ERC grant (VULCAN, 101086998). Josep Puigmartí-Luis acknowledges the Agencia Estatal de Investigación (AEI) for the María de Maeztu, project no. CEX2021-001202-M, the Ministerio de Ciencia, Innovación y Universidades (Grant No. PID2020-116612RB-C33 funded by MCIN/AEI/10.13039/501100011033) and the Generalitat de Catalunya (2021 SGR 00270). James D. Nicholas, Jordi Ignés-Mullol, and Josep Puigmartí-Luis acknowledge support from the European Union’s Horizon Europe Research and Innovation Programme under the EVA project (GA no: 101047081). Josep Puigmartí-Luis and Jordi Ignés-Mullol acknowledge support from the European Union’s Horizon 2020 Proactive Open program under FETPROACT-EIC-05-2019 ANGIE (No. 952152). Jordi Ignés-Mullol also acknowledges the Ministerio de Ciencia, Innovación y Universidades (Grant No. PID2022-137713NB-C21 funded by MICIU/AEI/10.13039/501100011033). Lauren Zarzar and Yutong Liu acknowledge support from the US Army Research Office (Grant W911NF-18-1-0414). Longqiu Li acknowledges the National Natural Science Foundation of China (52125505, U23A20637) for providing financial support. Wyatt Shields acknowledges support from the National Science Foundation (NSF) through a CAREER grant (CBET 2143419). Xing Ma acknowledges the support from Shenzhen Science and Technology Program (RCJC20231211090000001). David H. Gracias acknowledges support from the NIH-NIBIB (R01EB017742). The content is solely the responsibility of the authors and does not necessarily represent the official views of the NIH. Samuel Sánchez acknowledges funding from the European Research Council (ERC) under the European Union’s Horizon 2020 and Horizon Europe research and innovation programmes (grants agreement No 866348, i-NanoSwarms), the CERCA program by the Generalitat de Catalunya, the project 2021 SGR 01606, and the "Centro de Excelencia Severo Ochoa" (Grant CEX2023-001282-S). Maria Jose Esplandiu acknowledges the Ministerio de Ciencia e Innovación of Spain (MICIN) through PID 2021-124568NB-I00 and TED2021-129898B-C21 project. Sarthak Misra and Antonio Lobosco acknowledge funding from European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Programme (Grant Nr. 866494, project-MAESTRO). Jinxing Li acknowledges support from the National Science Foundation under Award Nos. CMMI 2323917, ECCS-2216131, ECCS 2339495, ECCS-2334134, NIH NIBIB Trailblazer R21 Award, and Henry Ford Hospital + MSU Cancer Research Pilot Award. Ze Xiong acknowledges the financial support from the International S&T Cooperation Program of Shanghai (24490710900) and the start-up grant from ShanghaiTech University (2023F0209-000-02). Yongfeng Mei acknowledges the National Natural Science Foundation of China (62375054), Science and Technology Commission of Shanghai Municipality (24520750200, 24CL2900200), and Shanghai Talent Programs. Ayusman Sen thanks the National Science Foundation, the Air Force Office of Scientific Research, and the Sloan Foundation for their financial support. Abdon Pena-Francesch acknowledges support from the Air Force Office of Scientific Research under award number FA9550-24-1-0185. Katherine Villa acknowledges funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (GA no. 101076680; PhotoSwim) and the support from the Spanish Ministry of Science (MCIN/AEI/10.13039/501100011033) and the European Union (Next generation EU/PRTR) through the Ramón y Cajal grant, RYC2021-031075-I. Kang Liang acknowledges support from the Australian Research Council (DP250101401 and FT220100479) and the National Breast Cancer Foundation, Australia (IIRS-22–104). Jizhai Cui acknowledges the National Key Technologies R&D Program of China (2022YFA1207000) and Shanghai Rising-Star Program (24QA2700700). Xiang-Zhong Chen acknowledges the National Natural Science Foundation of China (52473254) and the National Key Research and Development Program of China (2023YFB35070003)., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2021-001202-M), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2023-001282-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Protein persulfidation: A ubiquitous modification regulating a broad spectrum of biological processes

  • Romero González, Luis Carlos
  • Carrillo, Reyes
  • Montesinos-Pereira, David
  • Luque, Carmen
  • Aroca, Ángeles
  • Gotor, Cecilia
Hydrogen sulfide signaling occurs mainly through protein persulfidation, which is an important post-translational modification and a highly dynamic process in plants. Beyond enzyme activity, persulfidation affects protein localization, structure, and interactions. This review provides an overview of the mechanisms governing this modification and, particularly, the pivotal role of the thioredoxin (TRX) system mediating depersulfidation, which is essential for maintaining redox homeostasis. Proteomic studies in Arabidopsis thaliana and other crops reveal that protein persulfidation is a widespread post-translational modification in plants, with over 11,700 polypeptides identified as susceptible. Functional analysis shows a high proportion of these proteins are involved in primary metabolic pathways and secondary metabolism. Gene Ontology analysis highlights additional processes regulated by persulfidation, underscoring its broad regulatory role in plant biology. These processes are mainly related to proteolysis, defense response, embryo development, protein transport, and response to cold. In addition, other processes regulated by H2S, which have been widely studied, also stand out, such as response to abscisic acid (ABA), response to oxidative stress, and response to water deprivation. A comprehensive description of the persulfidated proteins implicated in the processes highlighted by the Gene Ontology analysis is provided. This integrated role of H2S with other molecules offers a panoramic overview of its importance in plant biology which also helps to raise new questions and working directions for the future research., This work was supported by ERDF A way of making Europe and MCIN/AEI/10.13039/501100011033 and NextGenerationEU/PRTR (grant No. TED2021- 131443B-I00 and PID2022-141885NB-I00), and Junta de Andalucía (grant No PROYEXCEL_00177). Reyes Carrillo was supported by AEI through the predoctoral contract PREP2022-000606, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A multidimensional review of the cash management problem

  • Salas-Molina, Francisco
  • Rodríguez-Aguilar, Juan Antonio
  • Guillén, Montserrat
In this paper, we summarize and analyze the relevant research on the cash management problem appearing in the literature. First, we identify the main dimensions of the cash management problem. Next, we review the most relevant contributions in this field and present a multidimensional analysis of these contributions, according to the dimensions of the problem. From this analysis, several open research questions are highlighted., Research supported by projects: Crowd4SDG (H2020-872944); CI-SUSTAIN (PID 2019-104156GB-I00); TAILOR (H2020-952215); TED2021-131295B-C31; TED2021-130187B-I00; PID2019-105986GB-C21 (funded by MCIN/AEI /10.13039/501100011033 and by the “European Union NextGeneration EU/PRTR”); VALAWAI (funded by the European Commission under Grant 101070930); 2021 SGR 00299; 2021 SGR 00754., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

How Warmer and Drier Conditions Drive Forest Dieback and Tree Death: A Review and Conceptual Model for Silver Fir

  • Gil-Pelegrín, Eustaquio
  • Peguero-Pina, José Javier
  • Sancho-Knapik, Domingo
  • Arrechea, Enrique
  • Camarero, Jesús Julio
This article belongs to the Special Issue Plant Stress Physiology and Molecular Biology (3rd Edition)., Agricultural and ecological systems are threatened by extreme and compound climate extremes such as hotter droughts. These events are characterized by elevated maximum temperatures, leading to atmospheric drought, and reduced precipitation, leading to soil drought. Such conditions reduce plant productivity and are increasing mortality trees in forests worldwide. Some forest types are particularly vulnerable to hotter droughts such as some European mountain silver fir (Abies alba) forests. However, we still lack conceptual frameworks linking hotter droughts and rising VPD with growth decline and tree death. This review elucidates physiological responses to drought in conifers with a focus on silver fir. In silver fir declining populations, prolonged stomatal closure under elevated VPD can lead to reduced growth, and impaired xylem development, potentially triggering positive feedback that exacerbates hydraulic limitations. We also review the ecological significance of xylem vulnerability to embolism, identifying the critical water potential thresholds that determine silver fir survival and hydraulic failure risk under soil water deficit. These findings underscore the importance of both atmospheric and soil drought as physiological stressors causing forest decline, and highlight the need for further research into adaptive strategies and early warning indicators in tree species., This research was funded by Spanish Ministry of Science and Innovation, grant numbers PID2021-123675OB-C43 and TED2021-129770B-C21. We also acknowledge funding by Government of Aragón contract 20244097 and S74_23R research group., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Recent Advances in Snow Monitoring from Local to Global Scales

  • Revuelto, Jesús
  • Alonso-González, Esteban
  • Deschamps-Berger, César
  • Gutmann, Ethan
  • López-Moreno, Juan I.
[Purpose of Review] Snow-related processes occur over a large range of spatial scales. Studying these processes therefore requires observation techniques with different spatial coverages, from short-range (up to several meters) to medium-range (several meters to several kilometers) and long-range (several kilometers to hundreds of kilometers). However, integration of observations with different coverages remains challenging because these have different spatial resolutions, making it difficult to ensure the representativeness across distinct techniques. Although snow observations have become more accurate in recent years, many challenges still prevent the retrieval of detailed and robust snow observations in mountainous and high-latitude regions. This review provides an overview of the most recent advances in techniques used to improve snow monitoring at different spatial coverages during the last 5 years., [Recent Findings] Although the use of in-situ methods has improved observations of the Snow Water Equivalent (SWE), these observations are still limited by the presence of liquid water and the need for secondary variables. Promising developments include Global Navigation Satellite Systems (GNSS) -based antennas for measurement of SWE and microwave permittivity for measurement of snow density. Similarly, further studies are needed to examine the impact of the forest canopy on snow detection and the presence of Light-Absorbing Particles (LAP) on the snow surface and their effect on snowpack albedo. Airborne technologies, including unmanned aerial vehicles (UAVs) with Light Detection and Ranging (LiDAR) or stereo optical imagery, have provided better observations of snow depth over large areas and have higher reliability than earlier technologies. Space-borne sensors can also provide advanced monitoring of snow, including measurements of snow depth distribution using satellite photogrammetry and monitoring of SWE using radar technologies., [Summary] Future efforts should focus on measurements of SWE and snow density from local to global scales, improve observations in forested areas, develop distributed data for snowpack variables, and integrate observations from techniques with different coverages. We also underscore that long-term monitoring from satellites must be maintained to achieve better forecasts of changes in snow, improve the management of snow resources, and provide a deeper understanding of the dynamics of climate change. Machine learning offers new opportunities for refining the techniques used for snow observations and integration of different techniques., This work was supported by the projects: SNOW SCALE (CNS2023-145107), MARGISNOW (PID2021-124220OB-100) and SNOWDUST (TED-2021-130114B-I00), all funded by the Spanish Ministry of Science and Innovation, and the excellence group of the Aragon Government “Procesos Geoambientales y Cambio Global (E02_23R)”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Introduction to special issue: floral ecology, genetics, and evolution in an unprecedentedly fast changing world

  • Picó, F. Xavier
  • Traveset, Anna
  • Vallejo-Marín, Mario
  • Arroyo, Juan M.
The study of floral biology has long attracted the attention of plant biologists because of its enormous basic and applied implications, spanning from identification of the ecological and genetic drivers of flowering plant evolution to the performance of crop yields in agricultural systems. In a rapidly changing planet, floral biology studies acquire an utmost importance to comprehend the multiple ecological, economical, and social challenges ahead for humanity. In this special issue, we gathered a collection of papers dealing with various ecological, genetic, and evolutionary aspects of floral biology. This special issue encompasses 12 papers showcasing theoretical and empirical research on plant-pollinator communities, pollinators and pollination modes, floral ecology and genetics at various spatial scales, and the effects of warming-induced abiotic stress on floral biology. Overall, this special issue highlights the importance of long-term spatial and temporal studies, which require a collaborative effort of the research community, and the development of experimental approaches to quantify in detail the effects of human-induced abiotic stress, such as droughts and heatwaves, on plant reproduction., This research was funded by grant PID2023-147962NB-I00 from Agencia Estatal de Investigación of Spain (AEI/10.13039/501100011033) and Fondo Europeo de Desarrollo Regional (FEDER, UE) to F.X.P., grants PID2021-122715NB-I00 and TED2021-131037B-I00 (MCIN/AEI/10.13039/501100011033, FEDER/UE) to J.A., and European Research Council (ERC AdG grant 101054177) to A.T., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Progress on quantum transport engineering in atomically precise anisotropic nanoporous graphene

  • Alcón, Isaac
  • Cummings, Aron W.
  • Ribas, Esteve
  • Roche, Stephan
  • Mugarza, Aitor
Bottom-up on-surface synthesis has demonstrated an impressive capability to realize desired carbon nanomaterials with atomic precision, also referred to as carbon nanoarchitectures. By using chemically tailored organic building blocks, it is possible to obtain virtually any carbon nanoarchitecture, with equally tunable electronic and magnetic properties. Among all known carbon nanoarchitectures, graphene nanoribbons (GNRs) have become the most extensively studied for nanoelectronics, due to their conductive π-conjugated structure and semiconducting nature. In this review, we summarize the progress made on a particular type of nanoporous graphenes (NPGs), conceived as 2D arrays of laterally bonded GNRs. Due to their relative novelty, these GNR-based NPGs have not yet acquired the same global attention as their predecessors (GNRs). However, recent progress suggests that these nanomaterials may play a central role in future carbon nanoelectronics and spintronics. This is due in large part to the ability to fine tune, both by chemical design and by external means, the electronic coupling between neighbouring GNRs within the NPG, thereby enabling precise control over the anisotropic properties of these materials, as demonstrated by various theoretical studies. In this review, we summarize the different approaches that have been proposed to tune such inter-ribbon coupling and, thus, the anisotropy. Overall, these studies underscore the unique platform that GNR-based NPGs provide for tailoring quantum electronic properties and two-dimensional anisotropy. As the field progresses, this capability could be harnessed for targeted applications at the molecular scale or even the atomic scale., IQTC is supported by the María de Maeztu program for Spanish Structures of Excellence (CEX2021-001202-M). ICN2 is funded by the CERCA Programme/Generalitat de Catalunya and supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039/501100011033. The authors acknowledge funding from Grant No. TED2021-132388B-C41 funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR, and Grant No. PID2022-140845OB-C63 funded by MICIU/AEI/10.13039/501100011033 and by FEDER, the European Union (EU)., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2021-001202-M), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Applied Artificial Intelligence in Materials Science and Material Design

  • Chávez-Angel, Emigdio
  • Eriksen, Martin Børstad
  • Castro-Álvarez, Alejandro
  • Garcia, Jose H.
  • Botifoll, Marc
  • Avalos-Ovando, Oscar
  • Arbiol, Jordi
  • Mugarza, Aitor
Materials science has traditionally relied on a combination of experimental techniques and theoretical modeling to discover and develop new materials with desired properties. However, these processes can be time-consuming, resource-intensive, and often limited by the complexity of material systems. The advent of artificial intelligence (AI), particularly machine learning, has revolutionized materials science by offering powerful tools to accelerate the discovery, design, and characterization of novel materials. AI not only enhances the predictive modeling of material properties but also streamlines data analysis in techniques like X-Ray diffraction, Raman spectroscopy, scanning probe microscopy, and electron microscopy. By leveraging large datasets, AI algorithms can identify patterns, reduce noise, and predict material behavior with unprecedented accuracy. In this review, recent advancements in AI applications across various domains of materials science, including spectroscopy, synchrotron studies, scanning probe and electron microscopies, metamaterials, atomistic modeling, molecular design, and drug discovery, are highlighted. It is discussed how AI-driven methods are reshaping the field, making material discovery more efficient, and paving the way for breakthroughs in material design and real-time experimental analysis., ICN2 was funded by the CERCA program/Generalitat de Catalunya and by the Severo Ochoa program of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, grant no. 2021SGR00457). This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). A.C.A. acknowledges support from Chilean National Fund for Scientific and Technological Development (FONDECYT) N° 11200620. O.A.-O. acknowledges the United States-Israel Binational Science Foundation BSF (grant no. 2018050) and the NQPI at Ohio University. M.B.M and J.A. acknowledge support from CSIC Interdisciplinary Thematic Platform (PTI+) on Quantum Technologies (PTI-QTEP+), European Commission—NextGenerationEU (Regulation EU 2020/2094), through CSIC's Quantum Technologies Platform (QTEP). Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science Ph.D. program. M.B.M acknowledges support from SUR Generalitat de Catalunya and the EU Social Fund; project ref. 2020 FI 00103. This study was supported by the EU HORIZON INFRA TECH 2022 project IMPRESS (Ref.: 101094299). This research was part of grant no. TED2021-132388B-C41, funded by MICIU/AEI/10.13039/ 501100011033 and the European Union NextGenerationEU/PRTR. ICN2 acknowledges funding from Grant IU16-014206 (METCAM FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is founding member of e-DREAM., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic hyperthermia in focus: emerging non-cancer applications of magnetic nanoparticles

  • Gavilán, Helena
  • Gallo-Cordova, Álvaro
  • Rábade-Chediak, Maura
  • Páez-Rodríguez, Amira
  • Morales, María Del Puerto
  • Gutiérrez, Lucía
This article is part of the themed collection: Recent Review Articles., Magnetic hyperthermia (MH), which leverages the ability of magnetic nanoparticles (MNPs), located in the tumor, to generate heat upon exposure to an alternating magnetic field (AMF), has long been synonymous with cancer therapy. However, recent advancements highlight emerging applications of MH beyond oncology, including neuromodulation, tissue engineering, biosensing, catalysis, and environmental remediation. All these applications intelligently harness the same principle to achieve a wide range of new functionalities in MNPs besides local heating, including drug release, eradication of pathogens, manipulation of cell membranes, mechanical responses for novel non-invasive therapies, boosting chemical reactions, intensifying processes and degrading or desorbing pollutants like CO<inf>2</inf>, just to name a few. This review provides a comprehensive overview of the latest breakthroughs in non-cancer applications of MH. While some fields, ranging from infection control and organ cryopreservation to nanorobotics in biomedicine, require non-toxic biocompatible and biodegradable MNPs (iron oxides) and AMFs restricted to radiofrequencies in the range of 100–300 kHz and an appropriate field intensity (few tens of kA m−1) to avoid tissue damage, some other areas, like sustainable catalysis, sensing, etc., open up the possibility of using diverse chemical elements besides iron (e.g., cobalt, nickel, carbon) mainly in the form of alloys, and AMFs of higher frequencies (well above 300 kHz) and amplitudes (well above 10–20 kA m−1). Indeed, engineering of MNPs with suitable catalytically active elements (gold, nickel, ruthenium, palladium, etc.), support materials (silica, aluminium/magnesium oxide, etc.) or surface coating with appropriate (bio)molecules (enzymes, RNA/DNA fragments, etc.) is crucial for each application, as well as considering the effect of local temperature (for instance, achieving the Curie temperature, T<inf>c</inf>, of the nanomaterial, provoking the de-swelling of polymers, activating/deactivating enzymes or boosting the efficiency of a catalytic process). Furthermore, this work discusses the current limitations and future directions required to expand the reach of MH. Finally, this review serves as a critical resource for researchers seeking to harness MH beyond cancer treatment and integrate it into novel scientific and technological frontiers. This journal is © 2025 The Royal Society of Chemistry, The authors would like to acknowledge funding from the “Plan de Recuperación, Transformación y Resiliencia” financed by the European Union–NextGenerationEU under H2umidity-Plus project; the Spanish Ministry of Science and Innovation through Project TED2021-130191B-C43, a Ramón y Cajal Research Fellowship (RYC2021-032448-I), and Project PID2023-150760NA-100; Project CNS2023-144321 funded by MICIU/AEI/10.13039/501100011033 and NextGenerationEU/PRTR; Fondo Social del Gobierno de Aragón (grupo DGA E15-23R); and the Severo Ochoa Centres of Excellence program through Grants CEX2023-001286-S and CEX2024-001445-S funded by MICIU/AEI/10.13039/501100011033. This publication is based upon work from COST Action CA23132 “MagneticParticle Imaging for next-generation theranostics and medical research” (NexMPI), supported by COST (European Cooperation in Science and Technology); and within the framework of the Una Europa Seed Funding Project DREAM-Nano (SF2405). A. P.-R. acknowledges funding from Beca Santander-Universidad de Zaragoza. Finally, the authors would like to thank the referees for their meticulous review, which contributed to improving this work., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2024-001445-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stimuli-Responsive Chemical Systems That Mimic Biological Dynamics

  • Aguanell, Antonio
  • Sarabia-Vallejo, Álvaro
  • Hennebelle, Marc
  • Pérez-Fernández, Ruth
Living systems achieve adaptability, motion, and self-regulation through chemical networks operating out of equilibrium. Reproducing these dynamics synthetically demands precise control over kinetics, thermodynamics, and molecular design to convert energy inputs into time-programmed function. Recent advances in stimuli-responsive and chemically powered systems show how life-like behaviors such as oscillations, autonomous motion, adaptive responses, and compartmentalization can be encoded using fuel-driven cycles and stimulus-gated switches powered by chemical, photonic, or enzymatic inputs. This mini-review highlights molecular assemblies that sustain transient states, molecular machines powered by specific chemical inputs, responsive materials that reconfigure in response to environmental triggers, nucleic acid-based networks for sensing and regulation, and artificial cells that exhibit compartmentalization and signaling. Together, these developments bridge systems chemistry and biomimicry, expanding the chemical toolkit for engineering matter that can adapt and respond. Beyond mimicking biology, such systems deepen our understanding of the molecular foundations of living matter and open new routes to technology. Self-powered systems, molecular motors, smart materials, and artificial cells now form a rapidly growing toolbox with the potential to impact drug discovery, biosensing, energy, food production, and materials science. The field's future lies in integrating multiple life-essential functions into a single construct, ultimately enabling synthetic systems that replicate the complex network behaviors of living organisms and inspire next-generation innovation., This work was supported by the Spanish Ministry of Science and Innova tion grants PID2022-142565OB-I00 and TED2021-132094B-I00, along with additional support from Fundación “La Caixa” (GReat, HR24-00445), the ERC Consolidator Grant under the Horizon Europe research and innovation program (Chem2Sense, GA No. 101125580). However, the views and opinions expressed are those of the authors only and do not necessarily reflect those of the Europea nUnion or the European Research Council. Neither the European Union nor the granting authority can be heldresponsible.AA also acknowledges funding from the FPI predoctoral fellowship associated with PID2022-142565OB-I00, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advances in the circular economy of polystyrene: A critical review of pyrolysis in pilot-scale systems, distillation, and re-polymerization

  • Royuela García, David
  • Veses Roda, Alberto
  • García Martínez, Tomás
  • Murillo Villuendas, Ramón
  • Martínez Ángel, Juan Daniel
16 figures, 5 tables., The widespread use of plastics in many sectors has resulted in the generation of a significant amount of waste, causing major environmental issues. Polystyrene (PS) is one of the most demanded polymers nowadays. Therefore, a consistent recycling pathway must be established to transition to a circular economy strategy. Pyrolysis of PS can recover styrene monomer (SM) in a liquid fraction that can be used to make new plastics. This replaces the need for fossil-based styrene and creates a circular economy. Although literature on this technology exists at the laboratory scale, advancing it to the pilot scale and beyond is crucial for its near-term deployment. Thus, this review compiles pilot-scale pyrolysis studies of PS and provides the industrial potential of each examined technology. It also emphasizes the need to implement a pyro-oil purification process via distillation, which has been demonstrated to achieve a purity level of over 99 wt% for SM. The potential for producing new PS products with comparable properties to conventional ones using the recovered styrene (r-styrene) in the so-called re-polymerization process is also addressed. Some research gaps, challenges and future perspectives are also outlined. Among others, distillation and re-polimerization on pilot-scales are necessary to be demonstrated to endorse the potential benefits of PS pyrolysis-based recycling. In-depth life cycle assessments (LCAs) using industrially relevant data are also expected in the future. This comprehensive analysis of the PS circular economy cycle through pyrolysis, distillation and re-polymerization is expected to boost the deployment of industrial-scale plants., The authors would like to acknowledge the support provided for the following projects: PLEC2021–007793 (Suschempool), funded by Ministry of Science and Innovation; PID2021-123759OB-I00 funded by MICIU/AEI/10.13039/501100011033 and “ESF Investing in your future” and TED2021-130093B-C21 funded by MICIU/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. The authors also thank the Regional Government of Aragon (DGA) for the support provided under the research group support program, as well as the interdisciplinary CSIC platforms SusPlast (Sustainable Plastics) and SosEcoCir (Sustainability and Circular Economy)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nano-patterning using ultra-thin alumina membranes

  • Fernández-González, C.
  • Ruiz-Gómez, S.
  • Arché-Núñez, A.
  • Pérez, L.
  • Tavares de Sousa, C.T.
With the mass production of well-controlled and low-cost nanostructures on the horizon, considerable attention has been given to porous anodic alumina (PAA) templates to assist in the fabrication of both individual and ordered nanostructured objects – particles, rods, wires, and holes – with applications in electronics, data storage, bioengineering, and nanomedicine. The fabrication of free-standing PAA templates, several microns thick, as well as their applications, have been largely described in the literature. In recent years, research has focused on the synthesis of ultra-thin anodic alumina membranes (UTAMs), making them compatible with top-down fabrication and large-scale production. The ability to obtain these nanostructures on different surfaces, including glass, silicon wafers, or flexible substrates, extends their range of applications, enabling the integration of nanostructured materials on top of thin layers and allowing for the precise tuning of the physical and chemical properties of the materials. This review focuses on this new and promising nanopatterning approach to fabricate large areas of ordered nanostructures using UTAMs as patterning masks. We report the most recent advances in the synthesis of UTAMs, focusing on two different approaches: in-situ anodization of thin aluminum films on various substrates and deterministic transfer of UTAMs onto a desired substrate. In the first case, we collect information regarding substrates, buffer layers, growth of Al films, anodization, and the post-treatment of the UTAMs. In the second case, we focus the review on the synthesis of UTAMs and, especially, on the transfer process to the substrate. For both methods, we compare the results regarding the nanostructure's self-organization and the control of size, shape, and spacing. Finally, we will review several applications in which the use of UTAMs plays a key role in the performance of nanostructured devices. © 2024 The Authors, Funded by the European Union through project BEETHOVEN (101129912). Partially funded also by MCIN/AEI, Spain/10.13039/501100011033 through Projects PID2020-117024GB-C43, PID2022-141080OB-C22 and TED2021-130957B-C52. IMDEA Nanociencia acknowledges support from the Severo Ochoa Programme for Centres of Excellence in R&D, Spain (Grant SEV-2016-0686). A. A.-N. and S. R.-G. acknowledge funding through the Advanced Materials programme supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by the Generalitat de Catalunya, Spain . C.T.S. acknowledges the program Atraccion de Talento (CAM), ref. 2020-T1/IND-19889. Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or the other granting authorities. Neither the European Union nor the granting authorities can be held responsible for them., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spatio-temporal tensor-network approaches to out-of-equilibrium dynamics bridging open and closed systems

  • Cerezo-Roquebrún
  • Bou-Comas, Aleix
  • Schneider, Jan T.
  • López, Esperanza
  • Tagliacozzo, Luca
  • Carignano, Stefano
16 pages, 10 figures, The study of many-body quantum systems out of equilibrium remains a significant challenge, with complexity barriers arising in both state- and operator-based representations. Here, we review the recent approaches based on finding better contraction strategies for the full spatiotemporal tensor networks that encode the path integral of the dynamics, as well as the conceptual integration of influence functionals, process tensors, and transfer matrices within the tensor network formalism. We discuss recent algorithmic developments, highlight the complexity of influence functionals in various dynamical regimes, and present consistent results of different communities, showing how ergodic dynamics render these functionals exponentially difficult to compress. Finally, we provide an outlook on strategies to encode complementary influence functional overlaps, paving the way for accurate descriptions of open and closed quantum systems with tensor networks., The author(s) declare that financial support was received for the research and/or publication of this article. We acknowledge support fromthe Proyecto Sinérgico CAMY2020/TCS-6545NanoQuCo-CM, the CSIC Research Platform on Quantum Technologies PTI-001, the Grant TED2021-130552B-C22 funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR,” and Grant PID2021-127968NB-I00 funded by MCIN/AEI/10.13039/501100011033. ABC is supported by GrantMMT24-IFF-01, and SC is supported by Grant C005/24-ED CV1. The funding for these actions/grants and contracts comes from the European Union’s Recovery and Resilience Facility-Next Generation, in the framework of the General Invitation of the Spanish Government’s public business entity Red.es to participate in talent attraction and retention programs within Investment 4 of Component 19 of the Recovery, Transformation and Resilience Plan
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ecological roles, climate-driven responses, and critical knowledge gaps of krill in the global ocean

  • Bernard, Kim S.
  • Tarling, Geraint A.
  • Atkinson, Angus
  • Cavan, Emma L.
  • Cleary, Alison
  • Dalpadado, Padmini
  • Díaz-Astudillo, Macarena
  • Dorman, Jeffrey
  • Edwards, Martin
  • Färber-Lorda, Jaime
  • García-Fernández, Franklin
  • Gómez-Gutiérrez, Jaime
  • Hill, Simeon L.
  • Kane, Mary
  • Kawaguchi, So
  • Manno, Clara
  • Meyer, Bettina
  • Riquelme-Bugueño, Ramiro
  • Schmidt, Katrin
  • Seco, José
  • Silva, Teresa
  • Sperfeld, Erik
  • Tremblay, Nelly
[Data availability] No new data were generated or analysed., Human-induced global climate change and other anthropogenic stressors are fundamentally altering our oceans. Understanding the ecological and societal implications of these changes is critical for developing mitigation strategies and conservation measures. However, major components of the marine pelagic ecosystem remain poorly understood. This is true for euphausiids (“krill”), which are a crucial part of marine food webs and play an important role in elemental cycling, including in the biological carbon pump, but for which we know surprisingly little. In this review, we first provide an overview of the ecological and socio-economic value of krill, highlighting their function in marine food webs and biogeochemical cycling. Next, we describe what is currently known regarding the response of krill to climate change and other anthropogenic stressors, focusing on changes in their biogeography, physiology, life history, as well as the impacts of krill fishing and their association with pathogens and parasites. We identify five key gaps in our current knowledge of krill: (1) the effects of krill on food web dynamics and stability, (2) the effects of changing predator and/or prey communities on krill populations, (3) the identification of important krill habitats, (4) the understanding of vertical and horizontal range shifts, and (5) the combined effects of multiple climate change and other anthropogenic stressors on krill. We also highlight the krill species, regions, and habitats that are understudied. Finally, we propose strategies to improve our understanding of this ecologically important taxonomic group, including the sustained funding for time series; implementation of novel research technologies; expanding research on understudied species and regions; and creating a global community of krill researchers., K.S.B. was supported by grants from the National Science Foundation (grant numbers 1753101, 2038145, and 2308300) and the National Geographic Society (grant numbers NGS-112184R-24 and NGS-169146SC-25). G.A.T. was supported by the Ecosystems CONSEC programme as part of National Capability support for Antarctic Logistics and Infrastructure by the Natural Environment Research Council (NERC), UK. A.A.’s contribution was funded through the UK Natural Environment Research Council through its National Capability Long-term Single Centre Science Programme, Atlantic Climate and Environment Strategic Science (AtlantiS), grant number NE/Y005589/1. E.L.C. was supported by a UK NERC grant NE/Y004515/1 and a WWF research grant (GB085708). A.C.C. was supported by the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement number 887760 (ParaKrill). Funding for J.G.G. is through Instituto Politécnico Nacional SIP-IPN 20250136. M.K.K. acknowledges funding from grant TED2021-132886B-I00 (including “EU NextGenerationEU/PRTR”) funds and from an individual postdoctoral fellowship “Vicenç Mut” (PD/027/2022) from Govern de les Illes Balears and Fondo Social Europeo, and the “María de Maeztu Unit of Excellence” grant to IMEDEA (UIB-CSIC) (CEX2021-001198/MICIU/AEI/10.13039/501100011033). C.M. was supported by UKRI-FLF project CUPIDO (MR/T020962/1). K.S. was funded through the UK NERC (grant number NE/P021409/1, PICCOLO project)., With funding from the Spanish government through the ‘María de Maeztu Unit of Excelence’ accreditation (CEX2021-001198), Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Surface-Functionalized Nanoparticles as Catalysts for Artificial Photosynthesis

  • Martí Balaguer, Gerard|||0000-0002-5888-6671
  • Mallón Pernia, Laura|||0000-0002-7738-0844
  • Romero Fernández, Nuria|||0000-0002-2704-7779
  • Francàs, Laia|||0000-0001-9171-6247
  • Bofill, Roger|||0000-0002-8888-1871
  • Philippot, Karine|||0000-0002-8965-825X
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Sala, Xavier|||0000-0002-7779-6313
Analogously to enzymatic catalysis, where the active metal sites and their environment are controlled by protein residues, the catalytic properties of metal nanoparticles (NPs) can be tuned by carefully selecting their surface-coordinated species. In artificial photosynthesis, surface-functionalization emerged in the last decade, grounded on the development of reliable methods for tailored synthesis, advanced characterization and theoretical modeling of metal NPs, altogether with the aim of transferring to the nanoscale the mechanistic knowledge acquired from molecular complexes. Metal NPs surface-functionalization modulates the energetics of key catalytic intermediates, introduces second coordination sphere effects, influences the catalyst-electrolyte interface, and determines the metal NPs surface coverage and, accordingly, the number of accessible active sites. In photoactivated systems, metal NPs surface-functionalization may play a key role in modulating the charge transfers and recombination processes between the light absorber and the active sites and in the light absorber itself. Thus, after a presentation of the most relevant synthetic methods to produce well-defined surface-functionalized metal NPs, a critical analysis of why the above effects are the cornerstone in enhancing their catalytic performance in the key processes of artificial photosynthesis, namely the oxygen evolution reaction, the hydrogen evolution reaction, and the CO2 reduction reaction, is given.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

A review on the management of rinse wastewater in the agricultural sector

  • Beltrán Flores, Eduardo|||0000-0002-3506-2899
  • Sarrà, Montserrat|||0000-0002-3447-6328
  • Blánquez, Paqui|||0000-0003-2443-9977
Pesticides have become indispensable compounds to sustain global food production. However, a series of sustainable agricultural practices must be ensured to minimize health and environmental risks, such as eco-friendly cultivation techniques, the transition to biopesticides, appropriate hygiene measures, etc. Hygiene measures should include the management of rinse wastewater (RWW) produced when cleaning agricultural equipment and machinery contaminated with pesticides (among other pollutants), such as sprayers or containers. Although some technical guidelines encourage the reuse of RWW in agricultural fields, in many cases the application of specialized treatments is a more environmentally friendly option. Solar photocatalysis was found to be the most widely studied physical-chemical method, especially in regions with intense solar radiation, generally using catalysts such as TiO, NaSO, and HO, operating for relatively short treatment periods (usually from 10 min to 9 h) and requiring accumulated radiation levels typically ranging from 3000 to 10000 kJ m. Biological treatments seem to be particularly suitable for this application. Among them, biobed is a well-established and robust technology for the treatment of pesticide-concentrated water in some countries, with operating periods that typically range from 1 to 24 months, and with temperatures preferably close to 20 °C; but further research is required for its implementation in other regions and/or conditions. Solar photocatalysis and biobeds are the only two systems that have been tested in full-scale treatments. Alternatively, fungal bioremediation using white rot fungi has shown excellent efficiencies in the degradation of pesticides from agricultural wastewater. However, greater efforts should be invested in gathering more information to consolidate these technologies and expand their use in the agricultural sector.