Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 129
Encontrada(s) 2 página(s)

BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Effect of dietary phenolic compounds intake on mortality in the “Seguimiento Universidad De Navarra” (SUN) Mediterranean cohort

  • Vázquez Ruiz, Zenaida
  • Toledo, Estefanía
  • Vitelli Storelli, Facundo Ezequiel
  • Bes Rastrollo, Maira
  • Martínez González, Miguel Ángel
[EN] Plant-based dietary patterns have been demonstrated to reduce the risk of non-communicable disease (NCD), including cardiovascular disease (CVD), type 2 diabetes, cancer, and all-cause mortality. Phenolic compounds (PC), abundant in plant-based foods, have been considered as instrumental in this attenuation of NCD risk. We evaluated the association between dietary intake of PC and the risk of all-cause mortality in a relatively young Mediterranean cohort of 18,173 Spanish participants in the “Seguimiento Universidad de Navarra” (SUN) project, after a median follow-up of 12.7 years. Intake of PC was estimated at baseline and repeatedly after 10-year follow-up using a 136-item validated food frequency questionnaire and the Phenol-Explorer database. During 236,329 person-years, 544 deaths were confirmed. Cox regression models compared low intake (lowest quintile) vs. high intake (the four upper quintiles merged, as a reference category) of total energy-adjusted PC intake. Adjusted hazard ratios (HR) for low PC intake among those participants aged over 45 years during follow-up were 1.32; 95% CI 1.02–1.71 for all-cause mortality, HR:1.44; 95% CI 1.02–2.02 for cancer mortality; HR: 0.88; 95% CI 0.47–1.66 for CVD mortality and HR: 1.69 95% CI 1.04–2.74 for causes of death other than cancer or CVD. In conclusion, a low intake of total PC was associated with a significantly higher risk of all-cause mortality, and, specifically, a higher risk for cancer in a relatively young cohort. Among PC classes a low intake of flavonoids and phenolic acids showed significant effects for non-cancer/non-CVD mortality. Cherries, chocolate, apples and pears, olives, and coffee, were the major sources of between-person variability for total PC intake in our Mediterranean cohort, SI, Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. The project SUN has received funding from the Spanish Government - Instituto de Salud Carlos III, and the European Regional Develop- ment Fund (FEDER) (RD 06/0045, CIBER-OBN, Grants PI10/02658, PI10/02293, PI13/00615, PI14/01668, PI14/01798, PI14/01764, PI17/01795, PI20/00564 and G03/140), the Government of Navarra (27/2011, 45/2011, 122/2014), the National Plan on Drugs (2020 / 021) as well as the University of Navarra
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Bio-Nanocomposite Hydrogel Based on Zinc Alginate/Graphene Oxide: Morphology, Structural Conformation, Thermal Behavior/Degradation, and Dielectric Properties

  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Molina Mateo, José|||0000-0002-0531-9876
  • Torregrosa Cabanilles, Constantino|||0000-0002-2786-3549
  • Meseguer Dueñas, José María|||0000-0001-7518-7971
  • Andrio-Balado, Andreu
  • Serrano-Aroca, Ángel
[EN] Bio-nanocomposite hydrogels based on sodium alginate (SA) as polymer matrix and graphene oxide (GO) nanosheets with zinc as crosslinking agent were synthesized with the aim of incorporating the intrinsic properties of their constituents (bioactivity and antimicrobial activity). Thus, stable and highly interconnected networks were obtained from GO nanosheets dispersed in SA matrices through interactions with low amounts of zinc. The GO nanosheets were successfully incorporated into the alginate matrix in the form of a complex nano-network involving different interactions: Bonds between alginate chains induced by Zn ions (egg box structure), interactions between GO nanosheets through Zn ions and hydrogen bonds between alginate chains, and GO nanosheets. The molecular interactions and morphology were confirmed by Fourier-transform infrared spectroscopy and transmission electron microscopy. The composite's structural organization showed enhanced thermal stability. The glass transition temperature shifted to a higher temperature due to the reduced mobility induced by additional crosslinking bonds after incorporating the GO nanosheets and Zn into the polymer matrix. Finally, the dielectric behavior revealed that charge carrier mobility was hampered by the compact structure of the nanonetwork, which reduced conductivity. The combined properties of these nanocomposite hydrogels make them attractive biomaterials in the field of regenerative medicine and wound care since both surface bioactivity and antibacterial behavior are two critical factors involved in the success of a biomaterial., This research was funded by the Spanish Ministry of Science, Innovations and Universities through the RTI2018-097862-B-C21 Project (including the FEDER financial support). A.S.-A. also acknowledges the Fundacion Universidad Catolica de Valencia San Vicente Martir though Grant No 2019-231-003UCV. CIBER-BBN (Centro de Investigacion Biomedica en Red, Bioingenieria, Biomateriales y Nanomedicina) is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Obtention and Study of Polyurethane-Based Active Packaging with Curcumin and/or Chitosan Additives for Fruits and Vegetables¿Part I: Analysis of Morphological, Mechanical, Barrier, and Migration Properties

  • Ruiz, David
  • Uscátegui, Yomaira L.
  • Diaz, Luis
  • Arrieta-Pérez, Rodinson R.
  • Valero, Manuel F.
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
[EN] Several polyurethane-formulated films with curcumin and/or chitosan additives for food packaging have been previously obtained. The study examines the effect of the additives on the film¿s morphological, mechanical, barrier, and migration properties. Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), water contact angle, thermogravimetric and differential thermal analysis (TGA and DTGA), differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), oxygen transmission rate (OTR), water vapor transmission rate (WVTR), and the overall and specific migration tests were conducted. The results show that the presence of chitosan significantly increased the overall migration and mechanical properties, such as the elongation at break, tensile strength, and Young¿s modulus of most polyurethane formulations, while curcumin had a minor influence on the mechanical performance. Based on the results, formulations with curcumin but without chitosan are suitable for food packaging., This research was funded by Universidad de La Sabana, grant number ING-289-2021. The APC was funded by Universidad de La Sabana and the Centre for Biomaterials and Tissue Engineering at Universitat Politècnica de València. CIBER-BBN, Biomedical Research Networking Center in Bioengineering, Biomaterials, and Nano-medicine is an initiative funded by the VI National R&D&I Plan 2008¿2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions were financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. J.A.G.-T thanks MCIN/AEI/10.13039/501100011033 grant number PID2020-114894RB-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Regional conduction velocities determined by noninvasive mapping are associated with arrhythmia-free survival after atrial fibrillation ablation

  • Invers-Rubio, Eric
  • Hernández-Romero, Ismael
  • Reventós-Presmanes, Jana
  • Ferró, Elisenda
  • Guichard, Jean Baptiste
  • Regany-Closa, Mariona
  • Pellicer-Sendra, Berta
  • Borrás, Roger
  • Tolosana, José María
  • Prat-Gonzalez, Susanna
  • Porta-Sanchez, Andreu
  • Arbelo, Elena
  • Guasch, Eduard
  • Sitges, Marta
  • Brugada, Josep
  • Roca-Luque, Ivo
  • Lluís Mont
  • TF Althoff
  • Guillem Sánchez, María Salud|||0000-0001-5660-3693
  • Andreu M. Climent|||0000-0002-7260-8811
[EN] BACKGROUND Atrial arrhythmogenic substrate is a key determinant of atrial fibrillation (AF) recurrence after pulmonary vein isolation (PVI), and reduced conduction velocities have been linked to adverse outcome. However, a noninvasive method to assess such electrophysiologic substrate is not available to date. OBJECTIVE This study aimed to noninvasively assess regional conduction velocities and their association with arrhythmia-free survival after PVI. METHODS A consecutive 52 patients scheduled for AF ablation (PVI only) and 19 healthy controls were prospectively included and received electrocardiographic imaging (ECGi) to noninvasively determine regional atrial conduction velocities in sinus rhythm. A novel ECGi technology obviating the need of additional computed tomography or cardiac magnetic resonance imaging was applied and validated by invasive mapping. RESULTS Mean ECGi-determined atrial conduction velocities were significantly lower in AF patients than in healthy controls (1.45 6 0.15 m/s vs 1.64 6 0.15 m/s; P < .0001). Differences were particularly pronounced in a regional analysis considering only the segment with the lowest average conduction velocity in each patient (0.8 6 0.22 m/s vs 1.08 6 0.26 m/s; P < .0001). This average conduction velocity of the ¿slowest¿ segment was independently associated with arrhythmia recurrence and better discriminated between PVI responders and nonresponders than previously proposed predictors, including left atrial size and late gadolinium enhancement (magnetic resonance imaging). Patients without slow-conduction areas (mean conduction velocity <0.78 m/s) showed significantly higher 12-month arrhythmia-free survival than those with 1 or more slow-conduction areas (88.9% vs 48.0%; P 5 .002). CONCLUSION This is the first study to investigate regional atrial conduction velocities noninvasively. The absence of ECGi-determined slow-conduction areas well discriminates PVI responders from nonresponders. Such noninvasive assessment of electrical arrhythmogenic substrate may guide treatment strategies and be a step toward personalized AF therapy., This work is supported in part by grants from the European Union s Horizon Research and Innovation Programme under the Marie Sk1odowska-Curie Grant Agreement (860974; to M.S.G.); Instituto de Salud Carlos III, Spanish Government, Madrid, Spain (FIS_PI16/00435 FIS_CIBER16; to L.M.); Ministerio de Ciencia e Innovación (supported by FEDER Fondo Europeo de Desarrollo Regional PI17/01106, PEJ2018-003617, and RYC2018-024346-I; to A.M.C.), EIT Health (SAVE-COR Activity code 220385, EIT Health is supported by EIT, a body of the European Union), Generalitat Valenciana Conselleria d Educació, Investigació, Cultura i Esport (ACIF/2020/265; to A.C.), and Spanish Agencia Estatal de Investigación (AEI), part of the Ministerio de Ciencia e Innovación, reference PID2020-119364RB-I00 (to A.C.).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Borax-loaded injectable alginate hydrogels promote muscle regeneration in vivo after an injury

  • Ciriza, Jesús
  • Rodriguez-Romano, Ana
  • Nogueroles, Ignacio
  • Pedraz, José Luis
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
  • Martín-Cabezuelo, Rubén|||0000-0002-5642-4692
  • Rico Tortosa, Patricia María
[EN] Muscle tissue possess an innate regenerative potential that involves an extremely complicated and synchronized process on which resident muscle stem cells play a major role: activate after an injury, differentiate and fuse originating new myofibers for muscle repair. Considerable efforts have been made to design new approaches based on material systems to potentiate muscle repair by engineering muscle extracellular matrix and/or including soluble factors/cells in the media, trying to recapitulate the key biophysical and biochemical cues present in the muscle niche. This work proposes a different and simple approach to potentiate muscle regeneration exploiting the interplay between specific cell membrane receptors. The simultaneous stimulation of borate transporter, NaBC1 (encoded by SLC4A11gene), and fibronectin-binding integrins induced higher number and size of focal adhesions, major cell spreading and actin stress fibers, strengthening myoblast attachment and providing an enhanced response in terms of myotube fusion and maturation. The stimulated NaBC1 generated an adhesion-driven state through a mechanism that involves simultaneous NaBC1/?5?1/?v?3 co-localization. We engineered and characterized borax-loaded alginate hydrogels for an effective activation of NaBC1 in vivo. After inducing an acute injury with cardiotoxin in mice, active-NaBC1 accelerated the muscle regeneration process. Our results put forward a new biomaterial approach for muscle repair., PR acknowledges support from the Spanish Ministry of Science, Innovation and Universities (RTI2018096794) , and Fondo Europeo de Desarrollo Regional (FEDER) . CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. The authors wish to thank also the intellectual and technical assistance from the ICTS "NANBIOSIS", more specifically by the Drug Formulation Unit (U10) of the CIBER in Bioengineering, Biomaterials & Nanomedicine (CIBER-BBN) at the University of Basque Country (UPV/EHU) . The authors are grateful to A. Miralles for the credit of image of the mouse included in the graphical abstract.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Mechanical, structural, and biological evaluation of multilayer HA-Ag/ TiO2/TiN/Ti coatings on Ti6Al4V obtained by magnetron sputtering for implant applications

  • Lenis, J.A.
  • Contreras Romero, Elbert
  • Hurtado Macías, Abel
  • Pacha-Olivenza, M.A.
  • González-Martín, M.L.
  • Bolívar, F.J.
  • Rico Tortosa, Patricia María
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] In the present work the surface of Ti6Al4V alloy, widely used for the fabrication of implants, was modified by incorporating a novel biocompatible and antibacterial coating composed of multiple layers of hydroxyapatite (HA) and Ag deposited on a TiO2/TiN/Ti trilayer. During the characterization of the coatings, their chemical and phase compositions were evaluated by energy dispersive X-ray spectroscopy and X-ray diffraction. Structural, topographical, and morphological studies were performed by focused ion beam, field emission scanning electron microscopy, transmission electron microscopy and atomic force microscopy. Mechanical properties were determined by nano indentation and micro scratch test. Finally, the in vitro biological response was evaluated by cell viability tests with mouse mesenchymal stem cells, while bacterial viability was evaluated with Staphylo-coccus aureus strain. The results obtained show great chemical and compositional control, identifying HA (Ca/P close to 1.67) and anatase phases for TiO2. Additionally, an architecture composed of nanometric layers forming a HA-Ag/TiO2/TiN/Ti coating with granular morphology was obtained. The incorporation of multiple Ag layers in the HA structure led to a decrease of about 44 % in its hardness, obtaining values of up to 6.3 GPa. Meanwhile, there was a relief in the residual stresses of >50 %, which generated increases of up to 74 % in the adhesion of the coatings to the substrate The biological tests showed that biocompatible coatings with high antibacterial potential were obtained., We thank the University of Antioquia, the Centro de Investigacion, Innovacion y Desarrollo de materiales (CIDEMAT) group, the Departamento Administrativo de Ciencia, Tecnologia e Innovacion (COLCIENCIAS) for financing the Project 15-1696, the scholarship program of Enlazamundos, the Agencia de Educacion Superior de Medellin (Sapiencia). The experimental work performed at the CBIT was funded by the Spanish State Research Agency (AEI) through the PID2019-106099RBC41/AEI/10.13039/501100011033 and RTI2018-096794-B-I00 projects. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions were financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. The Microscopy Service of the UPV (Universitat Politècnica de València) is gratefully acknowledged. The authors are grateful to Junta de Extremadura and FEDER for grants GR18153 and IB20092. The project RTI2018-096862B-I00, supported by MCIN/AEI/10.13039/501100011033/and by FEDER "Una manera de hacer Europa", is also highly appreciated.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Role of Electrospinning Parameters on Poly(Lactic-co-Glycolic Acid) and Poly(Caprolactone-co-Glycolic acid) Membranes

  • Herrero-Herrero, María
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
  • Vallés Lluch, Ana|||0000-0002-7896-8666
[EN] Poly(lactic-co-glycolic acid) (PLGA) and poly(caprolactone-co-glycolic acid) (PCLGA) solutions were electrospun into membranes with tailored fiber diameter of 1.8 mu m. This particular fiber diameter was tuned depending on the used co-polymer by adjusting the electrospinning parameters that mainly influence the fiber diameter. The greatest setting of the fiber diameter was achieved by varying the polymer solution parameters (polymer concentration, solvents and solvents ratio). PLGA was adequately electrospun with 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP), whereas PCLGA required a polar solvent (such as chloroform) with a lower dielectric constant. Moreover, due to the amorphous morphology of PCLGA, pyridine as salt had to be added to the starting solution to increase its conductivity and make it electrospinnable. Indeed, the electrospinning of this co-polymer presents notable difficulties due to its amorphous structure. Interestingly, PCLGA, having a higher glycolic acid molar fraction than commonly electrospun co-polymers (caprolactone:glycolic acid ratio of 45:55 instead of 90:10), could be successfully electrospun, which has not been reported to date. To an accurate setting of fiber diameter, the voltage and the distance from needle to collector were varied. Finally, the study of the surface tension, conductivity and viscosity of the polymer solutions allowed to correlate these particular characteristics of the solutions with the electrospinning variables so that prior knowledge of them enables predicting the required processing conditions., M. Herrero acknowledges the Spanish Ministerio de Economia y Competitividad for the BES-2016-078024 grant. A.Valles acknowledges the support of the Generalitat Valenciana, Conselleria de Educacion, Investigacion, Cultura y Deporte through project AEST/2020/052. CIBER-BBN is an initiative funded by the VI National R&D & I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

In vivo and in vitro biocompatible alginate film crosslinked with Ca2+ and Co2+ manifests antiviral, antibacterial and anticancer activity

  • Cano-Vicent, Alba
  • Martínez-Agut, Andrea
  • Tuñón-Molina, Alberto
  • Bakshi, Hamid
  • Alfagih, Iman M.
  • Serrano-Aroca, Ángel
  • Tambuwala, Murtaza M.
  • Sabater i Serra, Roser|||0000-0002-5550-7066
[EN] Alginate crosslinked with calcium cations is a promising hydrogel for biomedical applications as it is non-toxic, has suitable mechanical properties and is insoluble in water. Cobalt has been shown to possess antibacterial capacity against Gram-positive and Gram-negative bacteria, and has an angiogenesis effect. In this study, alginate films were crosslinked with Ca2+ and Co2+ ions to explore their biological properties in terms of antiviral capacity, antibacterial properties, anticancer activity and their toxicity. The results show that the hydrogel with a very small amount of cobalt was biocompatible in vivo using the Caenorhabditis elegans model and in vitro on human keratinocyte cells and it also exhibited antibacterial activity against the life-threatening methicillinresistant Staphylococcus aureus. Furthermore, this hydrogel showed antiviral activity against a surrogate of SARSCoV-2 and anticancer properties against melanoma and colon cancer cells, which render it a promising material for biomedical applications such as wound healing and tissue engineering. Water sorption experiments, Fourier transform infrared spectroscopy, electron microscopy with Energy Dispersive X-ray Spectrometry and degradation analysis in acid aqueous medium were performed to complete the characterization of these new materials., The authors would like to express their gratitude to the Fundacion Universidad Catolica de Valencia San Vicente Martir and to the Spanish Ministry of Science and Innovation for their financial support through Grant 2020-231-006UCV and PID2020-119333RB-I00 / AEI / 10.13039/501100011033, respectively. The CIBER-BBN initiative is funded by the VI National R&D&I Plan 2008 - 2011, Iniciativa Ingenio 2010, Consolider Program. CIBER actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development. Funding support also from Researchers Supporting Project number (RSP-2023R782), King Saud University, Riyadh, Saudi Arabia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optimization of a decellularized protocol of porcine tracheas. Long-term effects of cryopreservation. A histological study

  • Milián, Lara
  • Sancho-Tello, María
  • Roig-Soriano, Joan
  • Foschini, Giovanna
  • Martínez-Hernández, Néstor J.
  • Ruiz-Sauri, Amparo
  • Zurriaga, Javier
  • Carda, Carmen
  • Mata, Manuel
  • Más Estellés, Jorge|||0000-0001-8446-6737
[EN] Objective: The aim of this study was to optimize a decellularization protocol in the trachea of Sus scrofa domestica (pig) as well as to study the effects of long-term cryopreservation on the extracellular matrix of decellularized tracheas. Methods: Porcine tracheas were decellularized using Triton X-100, SDC, and SDS alone or in combination. The effect of these detergents on the extracellular matrix characteristics of decellularized porcine tracheas was evaluated at the histological, biomechanical, and biocompatibility level. Morphometric approaches were used to estimate the effect of detergents on the collagen and elastic fibers content as well as on the removal of chondrocytes from decellularized organs. Moreover, the long-term structural, ultrastructural, and biomechanical effect of cryopreservation of decellularized tracheas were also estimated. Results: Two percent SDS was the most effective detergent tested concerning cell removal and preservation of the histological and biomechanical properties of the tracheal wall. However, long-term cryopreservation had no an appreciable effect on the structure, ultrastructure, and biomechanics of decellularized tracheal rings. Conclusion: The results presented here reinforce the use of SDS as a valuable decellularizing agent for porcine tracheas. Furthermore, a cryogenic preservation protocol is described, which has minimal impact on the histological and biomechanical properties of decellularized porcine tracheas., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This work was supported by grants MAT2016-76039-C4-2-R (MST) and PID2019-106099RB-C42 (MM) from the Ministry of Economy and Competitiveness of the Spanish Government, by grant PI16-01315 from the ISCIII (Ministerio de Ciencia, Innovacion y Universidades, Spain), and by grant PROMETEO/2020/069 (CC) from the local government of the Comunitat Valenciana (Spain), CIBER-BBN and CIBERER are funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions, and the Instituto de Salud Carlos III, with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Association of miR-126-3p, miR-1260b and miR-374a-5p with the incidence of heart failure in a population-based cohort: the Hortega Follow-Up Study

  • Grau-Perez, Maria
  • Martinez-Arroyo, Olga
  • Rubia-Martinez, Marta
  • Flores-Chova, Ana
  • Rodríguez-Hernández, Zulema
  • Fernández-Navarro, Pablo
  • Gonzalez-Neira, Anna
  • Alonso, María Rosario
  • Pita, Guillermo
  • Pineda, Silvia
  • Martin-Escudero, Juan C.
  • Redon, Josep
  • Tellez-Plaza, Maria
  • Cortes, Raquel
  • Guasque Ortega, Ana|||0000-0002-2900-8466
[EN] Background: Circulating microRNAs (miRNAs) are emerging markers for cardiovascular prevention and control. miRNAs associated to vascular damage are candidates to play a causal role in the microvascular dysfunction of heart failure (HF). The aim was to evaluate the observational and causal (Mendelian randomization) association of miRNAs related with vascular alterations (miR-126-3p, miR-1260b and miR-374a-5p) with HF incidence in a sample from the general population. Methods: Plasma miRNAs levels were measured in 985 Hortega Study participants using real time quantitative polymerase chain reaction (RT-qPCR). Single nucleotide polymorphisms (SNPs) were genotyped with the TOPMED imputable Illumina GSA array. We identified genetic instrumental variables for miR-126-3p (33 SNPs), miR-1260b (22 SNPs) and miR-374a-5p (35 SNPs) and run several Mendelian randomization approaches. Results: The hazard ratio (95 % confidence interval) of HF by a 10-fold increase in miR-126-3p, miR-1260b and miR-374a-5p was 1.53 (1.09, 2.14), 1.38 (1.03, 1.86), and1.30 (1.09, 1.57), respectively. The corresponding rate differences were 9.7 (-0.1, 19.5), 12.0 (0.4, 23.6) and 9.1 (1.2, 17.1) per 10000 person-years. In flexible dose-response analysis, increased miRNAs levels were associated with higher HF risk, both in the relative and additive scale. In Mendelian randomization analysis, consistently suggestive positive causal associations were found with HF for increased miR-126-3p and miR-1260b levels, but not for miR-374a-5p. Conclusions: In observational analysis, miR-126-3p, miR-1260b and miR-374a-5p levels were positively associ-ated with HF incidence. Mendelian randomization analysis supported a causal role for miR-126-3p and miR-1260b, thus suggesting a potential use as prognostic and therapeutic targets for HF prevention and control., We thank Nuria Alvarez y Belen Herraez, from the Human Genotyping-CEGEN Unit, at the National Center for Cancer Research from the Carlos III Health Institutes, in Madrid (Spain) , for their contribution in the genotyping procedure. This research was funded by health sciences research grants from the Carlos III Health Institute (grant numbers PI19/01796 to J.R.; PI21/00249 and CP22/00069 to R.C.; PI23/01179 to A.O.; FI20/00096 to O.M.-A; and FI22/00032 to A.F.-C.; PI15/00071 and PI22CIII/00029 to M.T.-P.) . This work was also sup-ported by the State Agency for Research (PID2019-108973RB-C21 to M. T.-P.) . Grant IJC2020-045308-I, Juan de la Cierva Incorporacion funded by MCIN/AEI/10.13039/501100011033 and by ESF-Investing in Your Future (to A.O.) ; CNS2022-136175, Research Consolidation Grants, funded by MCIN/AEI/10.13039/501100011033 and European Union "Next Generation EU"/PRTR" (to R.C) .; FP7-HEALTH 11 (grant number no 278249) . It was co-funded by the European Union (the European Regional Development Fund (ERDF) and the European Social Fund (FSE) ) ; CIBER of Obesity and Nutrition Physiopathology (CIBEROBN) (grant numbers CIBER-02-08-2009, CB06/03 and CB12/03/30016) . CIBER of Cardiovascular diseases (CIBERCV) (grant number CB16/11/00261) . CIBEROBN and CIBERCV are co-funded with European Funds for Regional Development (FEDER) , and IDIFEDER/2021/072, CIAICO/2022/181 and INVEST/2023/180 from the Generalitat Valenciana of Spain. Z.R.-H. received a fellowship associated to a Spain National Investigation Agency project (PRE2020-093926) . The genotyping service was carried out at the Genotyping Unit-CEGEN in the Spanish Na-tional Cancer Research Centre (CNIO) , supported by Instituto de Salud Carlos III (ISCIII) , Ministerio de Ciencia e Innovacion. CEGEN is part of the initiative IMPaCT GEN oMICA (IMP/00009) cofunded by ISCIII and the European Regional Development Fund (ERDF)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Determination of synergistic effect between roughness and surface chemistry on cell adhesion of a multilayer Si- Hydroxyapatite coating on Ti6Al4V obtained by magnetron sputtering

  • Pérez Zapata, K.
  • Lenis, J.A.
  • Bolívar, F.J.
  • Rico Tortosa, Patricia María
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Ti alloys are widely used in the biomedical field because they have an adequate balance between mechanical properties, corrosion resistance and biocompatibility. However, when this material is incorporated in the human body, unfavorable reactions can be obtained which do not allow a good osseointegration due to the formation of a fibrous and non-adherent layer between the biomaterial and the bone, which can lead to failure or rejection of the implant. In this study, the influence of surface modification of Ti6Al4V alloy with a hydroxyapatite (HA) and silicon (Si) coating on its biological response in vitro was evaluated. The deposition process was performed by sputtering on two Ti6Al4V surfaces with different root mean square roughness values, the first one with 3.8 nm and the second one with 48.7 nm. The surface morphology of the coatings was observed by Scanning Electron Microscopy and Atomic Force Microscopy, the chemical composition was evaluated by X-ray Energy Dispersive Spectrometry and micro-Raman Spectroscopy. The in vitro biological response of the coatings was evaluated by cell metabolic activity assay and cell adhesion tests, using mouse mesenchymal stem cells. The control of the process parameters allowed obtaining a multilayer HA-Si coating with good compositional balance (Ca/P ratio very close to 1.67 and characteristic vibrations of the HA phase). Roughness values of 27 +/- 5 nm and 52 +/- 6 nm were obtained for the multilayer coatings obtained on Ti6Al4V (smooth surface) and Ti6Al4V (rough surface), respectively. Biological assays indicated a potentially non-toxic character of the coatings, moreover, the cell adhesion of Ti6Al4V was favored both by the incorporation of the HA-Si multilayer coating and by the increase in the roughness of the substrate., We thank the University of Antioquia, the Centro de Investigacion, Innovacion y Desarrollo de materiales (CIDEMAT) group, the Departamento Administrativo de Ciencia, Tecnologia e Innovacion (COLCIEN-CIAS) for financing the Project 15-1696, the scholarship program of Enlazamundos, the Agencia de Educacion Superior de Medellin (Sapiencia), JLGR acknowledges financial support from the Spanish Ministry of Economy and Competitiveness (MINECO) through the project MAT2016-76039-C4-1-R and MAT 2015-63974-C4-3-R (AEI/FEDER, UE) (including the FEDER financial support). PR acknowledges support from the Spanish Ministry of Science, Innovation and Universities (RTI2018-096794), and Fondo Europeo de Desarrollo Regional (FEDER). CIBER-BBN is an initiative funded by the VI National R & D & I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Covalent functionalization of decellularized tissues accelerates endothelialization

  • Dal Sasso, Eleonora
  • Zamuner, Annj
  • Filippi, Andrea
  • Romanato, Filippo
  • Palmosi, Tiziana
  • Vedovelli, Luca
  • Gregori, Dario
  • Russo, Teresa
  • Gloria, Antonio
  • Iop, Laura
  • Gerosa, Gino
  • Dettin, Monica
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] In the field of tissue regeneration, the lack of a stable endothelial lining may affect the hemocompatibility of both synthetic and biological replacements. These drawbacks might be prevented by specific biomaterial functionalization to induce selective endothelial cell (EC) adhesion. Decellularized bovine pericardia and porcine aortas were selectively functionalized with a REDV tetrapeptide at 10(-5) M and 10(-6) M working concentrations. The scaffold-bound peptide was quantified and REDV potential EC adhesion enhancement was evaluated in vitro by static seeding of human umbilical vein ECs. The viable cells and MTS production were statistically higher in functionalized tissues than in control. Scaffold histoarchitecture, geometrical features, and mechanical properties were unaffected by peptide anchoring. The selective immobilization of REDV was effective in accelerating ECs adhesion while promoting proliferation in functionalized decellularized tissues intended for blood-contacting applications., JLGR acknowledges financial support from the Spanish State Research Agency (AEI) through the PID2019-106099RB-C41/AEI/10.13039/501100011033 project. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Non-Markovian Methods in Glass Transition

  • Torregrosa Cabanilles, Constantino|||0000-0002-2786-3549
  • Molina Mateo, José|||0000-0002-0531-9876
  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Meseguer Dueñas, José María|||0000-0001-7518-7971
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] A model for the heterogeneity of local dynamics in polymer and other glass-forming materials is provided here. The fundamental characteristics of the glass transition phenomenology emerge when simulating a condensed matter open cluster that has a strong interaction with its heterogeneous environment. General glass transition features, such as non-exponential structural relaxations, the slowing down of relaxation times with temperature and specific off-equilibrium glassy dynamics can be reproduced by non-Markovian dynamics simulations with the minimum computer resources. Non-Markovian models are shown to be useful tools for obtaining insights into the complex dynamics involved in the glass transition phenomenon, including whether or not there is a need for a growing correlation length or the relationship between the non-exponentiality of structural relaxations and dynamic heterogeneity., The APC was funded by the Spanish Ministry of Science, Innovations, and Universities through the RTI2018-097862-B-C21 Project (including the FEDER financial support). CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008¿2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Zinc Chloride: Time-Dependent Cytotoxicity, Proliferation and Promotion of Glycoprotein Synthesis and Antioxidant Gene Expression in Human Keratinocytes

  • Salesa, Beatriz
  • Serrano-Aroca, Ángel
  • Sabater i Serra, Roser|||0000-0002-5550-7066
[EN] Zinc ions are involved in the biology of cell growth, proliferation, differentiation or apoptosis by regulating many biological molecules, such as transcription factors, enzymes and growth factors. In this study, the time-dependent cytotoxicity, cell proliferation and gene expression in human keratinocytes HaCaT cells were evaluated when exposed to ZnCl2. The results of this study showed non-cytotoxic effects up to 10 mu g/mL after 24 h, no significant effect on cell proliferation when exposed to 5 or 1 mu g/mL ZnCl2 at 72 h and upregulation of eight genes, with great potential in the biomedical field, particularly for regenerative-medicine applications and wound healing. The use of ionic metals such as zinc (Zn2+) is providing promising results in regenerative medicine. In this study, human keratinocytes (HaCaT cells) were treated with different concentrations of zinc chloride (ZnCl2), ranging from 1 to 800 mu g/mL, for 3, 12 and 24 h. The results showed a time-concentration dependence with three non-cytotoxic concentrations (10, 5 and 1 mu g/mL) and a median effective concentration value of 13.5 mu g/mL at a cell exposure to ZnCl2 of 24 h. However, the zinc treatment with 5 or 1 mu g/mL had no effect on cell proliferation in HaCaT cells in relation to the control sample at 72 h. The effects of the Zn2+ treatment on the expression of several genes related to glycoprotein synthesis, oxidative stress, proliferation and differentiation were assessed at the two lowest non-cytotoxic concentrations after 24 h of treatment. Out of 13 analyzed genes (superoxide dismutase 1 (SOD1), catalase (CAT), matrix metallopeptidase 1 (MMP1), transforming growth factor beta 1 (TGFB1), glutathione peroxidase 1 (GPX1), fibronectin 1 (FN1), hyaluronan synthase 2 (HAS2), laminin subunit beta 1 (LAMB1), lumican (LUM), cadherin 1 (CDH1), collagen type IV alpha (COL4A1), fibrillin (FBN) and versican (VCAN)), Zn2+ was able to upregulate SOD1, CAT, TGFB1, GPX1, LUM, CDH1, FBN and VCAN, with relative expression levels of at least 1.9-fold with respect to controls. We found that ZnCl2 promoted glycoprotein synthesis and antioxidant gene expression, thus confirming its great potential in biomedicine., This study was founded by the Fundacion Universidad Catolica de Valencia San Vicente Martir, Grant 2020-231-006UCV, the Spanish Ministry of Science and Innovation (PID2020-119333RB-I00/AEI/10.13039/501100011033) (awarded to A.S.-A.) and the FEDER/Spanish Ministry of Science and Innovation-Agencia Estatal de Investigacion) through the Project RTI2018-097862-B-C21 (awarded to R.S.i.S). CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Crystallization Monitoring of Semicrystalline Poly(vinylidene fluoride)/1-Ethyl-3-methylimidazolium Hexafluorophosphate [Emim][PF6] Ionic Liquid Blends

  • Correia, Daniela M.
  • Costa, Carlos M.
  • Krakovsky, Ivan
  • Lanceros-Méndez, Senentxu
  • Rodriguez-Hernandez, Jose-Carlos|||0000-0002-1735-824X
  • Tort-Ausina, Isabel|||0000-0002-1900-914X
  • Teruel Biosca, Laura|||0000-0002-0943-9031
  • Torregrosa Cabanilles, Constantino|||0000-0002-2786-3549
  • Meseguer Dueñas, José María|||0000-0001-7518-7971
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] The electroactive characteristics of poly(vinylidene fluoride) (PVDF) are widely and increasingly being used in technological applications, where controlling the crystallization of the PVDF is of utmost importance. The nucleation and growth of crystals in the beta or. electroactive phases, or in the nonelectroactive a phase, depends on a number of factors that, despite the studies carried out, are still to be properly understood, in particular, when blended with specific active fillers. In this context, the crystallization of PVDF blended with the ionic liquid (IL) 1-ethyl-3-methylimidazolium hexafluorophosphate ([Emim][PF6]) has been analyzed. Both components are capable of crystallizing from the melt. The growth of the crystalline phases of PVDF during isothermal crystallization at different temperatures has been monitored using Fourier transform infrared (FTIR) spectroscopy. The isothermal crystallization kinetics of PVDF and the melting temperatures of both PVDF and IL were characterized by differential scanning calorimetry, and the microstructures of the blends were analyzed by optical and electron microscopy. It is observed for [Emim][PF6]/PVDF blends that the isothermal crystallization from the melt between 120 and 162 degrees C produces PVDF crystallites in the beta and. electroactive phases, while the formation of a-phase crystals is nearly suppressed. The morphology of the blends is altered by the addition of IL, which results in the separation of solid phases at room temperature. In addition, [Emim][PF6] remains liquid when mixed with the amorphous PVDF chains due to the cryoscopic descent., This work was supported by the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Funding UID/FIS/04650/2019. The authors thank FEDER funds through the COMPETE 2020 Program and National Funds through FCT under the projects PTDC/BTM-MAT/28237/2017, PTDC/EEI-SII/5582/2014, and PTDC/FIS-MAC/28157/2017. D.M.C. thank the FCT for grant SFRH/BPD/121526/2016 and C.M.C. for the Investigator FCT Contract 2020.04028.CEECIND. The work of the Spanish groups has been funded by the Spanish State Research Agency (AEI) through the PID2019-106099RB-C41/AEI/10.13039/501100011033 project and from the Basque Government Industry and Education Departments under the ELKARTEK and PIBA (PIBA-2018-06) programs, respectively. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Gene-environment interaction analysis of redox-related metals and genetic variants with plasma metabolic patterns in a general population from Spain: The Hortega Study

  • Galvez-Fernandez, Marta
  • Domingo-Relloso, Arce
  • Rodríguez-Hernández, Zulema
  • Gonzalez-Marrachelli, Vannina
  • Grau-Perez, Maria
  • Morales-Tatay, José M.
  • Amigo, Nuria
  • Garcia-Barrera, Tamara
  • Gomez-Ariza, Jose L.
  • Chaves, F. Javier
  • Garcia-Garcia, Ana Barbara
  • Melero, Rebeca
  • Tellez-Plaza, Maria
  • Sanchez Saez, Francisco|||0000-0002-3011-9884
  • Tarazona, Sonia|||0000-0001-5346-1407
[EN] Background: Limited studies have evaluated the joint influence of redox-related metals and genetic variation on metabolic pathways. We analyzed the association of 11 metals with metabolic patterns, and the interacting role of candidate genetic variants, in 1145 participants from the Hortega Study, a population-based sample from Spain. Methods: Urine antimony (Sb), arsenic, barium (Ba), cadmium (Cd), chromium (Cr), cobalt (Co), molybdenum (Mo) and vanadium (V), and plasma copper (Cu), selenium (Se) and zinc (Zn) were measured by ICP-MS and AAS, respectively. We summarized 54 plasma metabolites, measured with targeted NMR, by estimating metabolic principal components (mPC). Redox-related SNPs (N = 291) were measured by oligo-ligation assay. Results: In our study, the association with metabolic principal component (mPC) 1 (reflecting non-essential and essential amino acids, including branched chain, and bacterial co-metabolism versus fatty acids and VLDL subclasses) was positive for Se , Zn, but inverse for Cu, arsenobetaine-corrected arsenic (As) and Sb. The association with mPC2 (reflecting essential amino acids, including aromatic , bacterial co-metabolism) was inverse for Se, Zn and Cd. The association with mPC3 (reflecting LDL subclasses) was positive for Cu, Se and Zn, but inverse for Co. The association for mPC4 (reflecting HDL subclasses) was positive for Sb, but inverse for plasma Zn. These associations were mainly driven by Cu and Sb for mPC1; Se, Zn and Cd for mPC2; Co, Se and Zn for mPC3; and Zn for mPC4. The most SNP-metal interacting genes were NOX1, GSR, GCLC, AGT and REN. Co and Zn showed the highest number of interactions with genetic variants associated to enriched endocrine, car-diovascular and neurological pathways. Conclusions: Exposures to Co, Cu, Se, Zn, As, Cd and Sb were associated with several metabolic patterns involved in chronic disease. Carriers of redox-related variants may have differential susceptibility to metabolic alterations associated to excessive exposure to metals., This work was supported by the Strategic Action for Research in Health sciences [CP12/03080, PI15/00071, PI10/0082, PI13/01848, PI14/00874, PI16/01402, PI21/00506 and PI11/00726] , CIBER Fisio-patologia Obesidad y Nutricion (CIBEROBN) (CIBER-02-08-2009, CB06/03 and CB12/03/30,016) , the State Agency for Research (PID2019-108973RB-C21 and C22) , the Valencia Government (GRU-POS 03/101; PROMETEO/2009/029 and ACOMP/2013/039, IDI-FEDER/2021/072 and GRISOLIAP/2021/119) , the Castilla-Leon Government (GRS/279/A/08) and European Network of Excellence Ingenious Hypercare (EPSS-037093) from the European Commission. The Strategic Action for Research in Health sciences, CIBERDEM and CIBEROBN are initiatives from Carlos III Health Institute Madrid and co-funded with European Funds for Regional Development (FEDER) . The State Agency for Research and Carlos III Health Institute belong to the Spanish Ministry of Science and Innovation. ADR received the support of a fellowship from "la Caixa"Foundation (ID 100010434) (fellowship code "LCF/BQ/DR19/11740016") . MGP received the support of a fellowship from "la Caixa" Foundation (ID 100010434, fellowship code LCFLCF/BQ/DI18/11660001) . The funding bodies had no role in the design of the study and collection, analysis, and interpretation of data and in writing the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Novel Semi-Interpenetrated Polymer Networks of Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate)/Poly (Vinyl Alcohol) with Incorporated Conductive Polypyrrole Nanoparticles

  • Aparicio-Collado, José Luís|||0000-0003-0874-9131
  • Molina Mateo, José|||0000-0002-0531-9876
  • Torregrosa Cabanilles, Constantino|||0000-0002-2786-3549
  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Novoa, Juan José
  • Serrano-Aroca, Ángel
[EN] This paper reports the preparation and characterization of semi-interpenetrating polymer networks (semi-IPN) of poly(3-hydroxybutirate-co-3-hydroxyvalerate), PHBV, and poly (vinyl alcohol), PVA, with conductive polypirrole (PPy) nanoparticles. Stable hybrid semi-IPN (PHBV/PVA 30/70 ratio) hydrogels were produced by solvent casting, dissolving each polymer in chloroform and 1-methyl-2-pyrrolidone respectively, and subsequent glutaraldehyde crosslinking of the PVA chains. The microstructure and physical properties of this novel polymeric system were analysed, including thermal behaviour and degradation, water sorption, wettability and electrical conductivity. The conductivity of these advanced networks rose significantly at higher PPy nanoparticles content. Fourier transform infrared spectroscopy (FTIR) and calorimetry characterization indicated good miscibility and compatibility between all the constituents, with no phase separation and strong interactions between phases. A single glass transition was observed between those of pure PHBV and PVA, although PVA was dominant in its contribution to the glass transition process. Incorporating PPy nanoparticles significantly reduced the hydrogel swelling, even at low concentrations, indicating molecular interactions between the PPy nanoparticles and the hydrogel matrix. The PHBV/PVA semi-IPN showed higher thermal stability than the neat polymers and PHBV/PVA blend, which also remained in the tertiary systems., This research was funded by the Spanish Ministry of Science, Innovation and Universities, grant number RTI2018-097862-B-C21, including the FEDER financial support, (awarded to R.S.i.S. and J.M.-M.) and by the Fundacion Universidad Catolica de Valencia San Vicente Martir, grant No 2019-231-003UCV (awarded to A.S.-A.). CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Broadband dielectric response of silk Fibroin/BaTiO3 composites: Influence of nanoparticle size and concentration

  • Costa, C.M.
  • Reizabal, A.
  • Andrio Balado, A.
  • Pérez-Álvarez, L.
  • Vilas-Vilela, J.L.
  • Lanceros-Méndez, S.
  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] In order to advance towards more sustainable electronics generation, natural polymers with tailored dielectric response are essential. In this search, the combination of bio-based materials with active fillers in composite form, suppose one of the most viable alternatives. To achieve it, this work has explored the ability to control dielectric response of Silk Fibroin, a protein polymer by its combination with ceramic barium titanate (BaTiO3) nanoparticles. Both the effect of filler concentration (0, 5, 10, 20 and 40 wt%) and size (100 and 200 nm) has been studied in composites processed by easily scalable techniques. Samples with a homogeneous distribution of nanoparticles have been obtained. Dielectric relaxation processes assessed by broadband dielectric relaxation spectroscopy (BDS) in wide frequency (0.1 Hz-1 MHz) and temperature ranges (- 40 to 220 degrees C), revealed a dielectric constant increasing with filler content and decreasing with filler size, ranging from 4.4 for SF up to 142 for the SF/BaTiO3 composite with 40 wt %, at room temperature and 1 kHz. Two relaxations processes are observed, the beta-relaxation and the conductivity relaxation, both with temperature-dependent behaviour. The activation energy of the conductivity process decreases with increasing nanoparticle content and decreasing size. A Maxwell-Wagner-Sillar process related to the interface between the silk fibroin matrix and the BaTiO3 nanoparticles was also identified., The authors thank the FCT (Fundacao para a Ciencia e Tecnologia) for financial support under the framework of Strategic Funding grants UID/FIS/04650/2019, and UID/EEA/04436/2019; and project PTDC/FIS-MAC/28157/2017. The author also thanks the FCT for financial support under grant SFRH/BPD/112547/2015 and Investigator FCT Contract 2020.04028.CEECIND (C.M.C.) as well POCH and European Union. Financial support from the Spanish Ministry of Science and Innovation (MCINN, Agencia Estatal de Investigacion) through the project RTI2018-097862-B-C21 and MAT2016-76039-C4-3-R (AEI/FEDER, UE) (including the FEDER financial support) and from the Basque Government Industry and Education Departments under the ELKARTEK, HAZITEK and PIBA (PIBA-2018-06) programs, respectively, are acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Kynurenic Acid Electrochemical Immunosensor: Blood-Based Diagnosis of Alzheimer’s Disease

  • Marrugo-Ramírez, José
  • Rodríguez-Núñez, Montserrat
  • Marco, María Pilar
  • Mir, Mònica
  • Samitier, Josep
Alzheimer’s disease (AD) is a neurodegenerative disorder, characterized by a functional deterioration of the brain. Currently, there are selected biomarkers for its diagnosis in cerebrospinal fluid. However, its extraction has several disadvantages for the patient. Therefore, there is an urgent need for a detection method using sensitive and selective blood-based biomarkers. Kynurenic acid (KYNA) is a potential biomarker candidate for this purpose. The alteration of the KYNA levels in blood has been related with inflammatory processes in the brain, produced as a protective function when neurons are damaged. This paper describes a novel electrochemical immunosensor for KYNA detection, based on successive functionalization multi-electrode array. The resultant sensor was characterized by cyclic voltammetry (CV), chronoamperometry (CA), and electrochemical impedance spectroscopy (EIS). The proposed biosensor detects KYNA within a linear calibration range from 10 pM to 100 nM using CA and EIS, obtaining a limit of detection (LOD) of 16.9 pM and 37.6 pM in buffer, respectively, being the lowest reported LOD for this biomarker. Moreover, to assess our device closer to the real application, the developed immunosensor was also tested under human serum matrix, obtaining an LOD of 391.71 pM for CA and 278.8 pM for EIS with diluted serum., The Nanobioengineering group has support from the Commission for Universities and Research of the Department of Innovation, Universities, and Enterprise of the Generalitat de Catalunya (2017 SGR 1079) and is part of the CERCA Programme/Generalitat de Catalunya. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008–2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund (CB06/01/0055). The work developed by the Nanobiotechnology for Diagnostics (Nb4D) group has been funded by the Ministry of Science and Innovation (TryKySeNS project, CTQ2011-29163-C03-01), and the Ministry of Economy and Competitiveness (Molecular links between diabetes and neurodegenerative disorders, Integrated Projects of Excellence in CIBER, PIE14/00061). The Nb4D group is a consolidated research group (Grup de Recerca) of the Generalitat de Catalunya and has support from the Departament d’Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya (expedient: 2017 SGR 1441)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cortical spreading depolarizations in stroke: Mechanisms, neuroprotective interventions, and monitoring techniques

  • Díaz-Pérez, Andrea
  • de Eulate, Nerea Alvarez
  • Masvidal Codina, Eduard
  • Illa, Xavi
  • Navarro, Xavier
  • Guimerà-Brunet, Anton
  • Jiménez-Altayó, Francesc
  • Penas, Clara
Cortical spreading depolarization (CSD) is a pathophysiological event critically implicated in ischemic stroke and other brain disorders. It consists of slowly propagating waves of massive neuronal and glial depolarization in cerebral gray matter, accompanied by spreading depression of cortical activity. CSD disrupts ion homeostasis, alters cerebral blood flow, and contributes to neuronal death in vulnerable tissue. This comprehensive review summarizes both classic and recent studies on CSD mechanisms and their role in brain damage progression after stroke. We also review potential neuroprotective strategies to mitigate CSD-induced damage and discuss available technologies for detecting CSD. Advancing our understanding of CSD mechanisms, combined with targeted neuroprotective strategies and improved monitoring techniques, holds promise for reducing stroke-related brain injury and guiding personalized recovery approaches., Open Access Funding provided by Universitat Autonoma de Barcelona. This work was supported by grant PID2021-126117NA-I00, CNS2023-144492, PID2022-140655OB-I00, PID2020–113634RB-C22, and PDC2023-145866-I00 funded by MCIU/AEI/https://doi. org/10.13039/501100011033and by the European Union NextGenerationEU/PRTR; by the European Union’s Horizon Europe research and innovation programme under grant agreement 101130650 (META-BRAIN) and 101136541 (GphT-BCI); through the Collaborative CIBERNED-CIBERBBN 2023 project GROKE and CIBERNED (CB06/05/1105) and CIBER-BBN (CB06/01/0049) funds from Instituto de Salud Carlos III of Spain, co-funded by European Union NextGenerationEU/PRTR; and funds from 2021-SGR-00495, 2021-SGR-004488, and 2021-SGR-00969 from Generalitat de Catalunya. The IMB-CNM (CSIC) is supported by the María de Maetzu Centres of Excellence programme ref. CEX2023-001397-M funded by MCINN-AEI., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Expectations among patients and health professionals regarding Web-based interventions for depression in primary care: A qualitative study

  • Montero-Marín, J.
  • Prado-Abril, J.
  • Botella, C.
  • Mayoral-Cleries, F.
  • Baños, R.
  • Herrera-Mercadal, P.
  • Romero-Sanchiz, P.
  • Gili, M.
  • Castro, A,
  • Nogueira, R.
  • García-Campayo, J
Background: One-quarter of the world’s population will suffer from depression symptoms at some point in their lives. Mental health services in developed countries are overburdened. Therefore, cost-effective interventions that provide mental health care solutions such as Web-based psychotherapy programs have been proposed. Objective: The intent of the study was to identify expectations regarding Web-based psychotherapy for the treatment of depression in primary care among patients and health professionals that might facilitate or hinder its effects. Methods: The expectations of untreated patients and health professionals were examined by means of interviews and focus groups. There were 43 participants (20 patients with mild and moderate levels of depression, 11 primary care physicians, and 12 managers; 22 of them for interviews and 21 for groups). A thematic content analysis from the grounded theory for interviews, and an analysis of the discursive positions of participants based on the sociological model for groups were performed. Interpretations were achieved by agreement between three independent analysts. Results: All participants showed a good general acceptance of Web-based psychotherapy, appreciating possible advantages and improvements. Patients, physicians, and managers shared the same conceptualization of their expectations, although highlighting different aspects. Patients focused on the need for individualized and personalized interaction, while professionals highlighted the need for the standardization of the program. Physicians were concerned with extra workload, while managers were worried about optimizing cost-effectiveness. Conclusions: Expectations of the different participants can conflict with each other. Finding a balanced position among them is needed if we are to harmoniously implement effective Web-based interventions for depression in routine clinical practice.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Low intensity vs. self-guided Internet-delivered psychotherapy for major depression: A multicenter, controlled, randomized study

  • López-del-Hoyo, Y.
  • Olivan, B.
  • Luciano, J.V.
  • Mayoral, F.
  • Roca, M.
  • Gili, M.
  • Andres, E.
  • Serrano-Blanco, A.
  • Collazo, F.
  • Araya, R.
  • Baños, R.
  • Botella, C.
  • Magallón, R.
  • García-Campayo, J.
Background: Major depression will become the second most important cause of disability in 2020. Computerized cognitive-behaviour therapy could be an efficacious and cost-effective option for its treatment. No studies on cost-effectiveness of low intensity vs self-guided psychotherapy has been carried out. The aim of this study is to assess the efficacy of low intensity vs self-guided psychotherapy for major depression in the Spanish health system. Methods: The study is made up of 3 phases: 1.- Development of a computerized cognitive-behaviour therapy for depression tailored to Spanish health system. 2.- Multicenter controlled, randomized study: A sample (N=450 patients) with mild/moderate depression recruited in primary care. They should have internet availability at home, not receive any previous psychological treatment, and not suffer from any other severe somatic or psychological disorder. They will be allocated to one of 3 treatments: a) Low intensity Internet-delivered psychotherapy + improved treatment as usual (ITAU) by GP, b) Self-guided Internet-delivered psychotherapy + ITAU or c) ITAU. Patients will be diagnosed with MINI psychiatric interview. Main outcome variable will be Beck Depression Inventory. It will be also administered EuroQol 5D (quality of life) and Client Service Receipt Inventory (consume of health and social services). Patients will be assessed at baseline, 3 and 12 months. An intention to treat and a per protocol analysis will be performed. Discussion: The comparisons between low intensity and self-guided are infrequent, and also a comparative economic evaluation between them and compared with usual treatment in primary. The strength of the study is that it is a multicenter, randomized, controlled trial of low intensity and self-guided Internet-delivered psychotherapy for depression in primary care, being the treatment completely integrated in primary care setting.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Expectations, experiences and attitudes of patients and primary care health professionals regarding online psychotherapeutic interventions for depression: Protocol for a qualitative study

  • Montero-Marín, J.
  • Carrasco, J.M.
  • Roca, M.
  • Serrano-Blanco, A.
  • Gili, M.
  • Mayoral, F.
  • Luciano, J.V.
  • Lopez-del-Hoyo, Y.
  • Olivan, B.
  • Collazo, F.
  • Araya, R.
  • Baños, R.
  • Botella, C.
  • García-Campayo, J.
Background: In the year 2020, depression will cause the second highest amount of disability worldwide. One quarter of the population will suffer from depression symptoms at some point in their lives. Mental health services in Western countries are overburdened. Therefore, cost-effective interventions that do not involve mental health services, such as online psychotherapy programs, have been proposed. These programs demonstrate satisfactory outcomes, but the completion rate for patients is low. Health professionals’ attitudes towards this type of psychotherapy are more negative than the attitudes of depressed patients themselves. The aim of this study is to describe the profile of depressed patients who would benefit most from online psychotherapy and to identify expectations, experiences, and attitudes about online psychotherapy among both patients and health professionals that can facilitate or hinder its effects. Methods: A parallel qualitative design will be used in a randomised controlled trial on the efficiency of online psychotherapeutic treatment for depression. Through interviews and focus groups, the experiences of treated patients, their reasons for abandoning the program, the expectations of untreated patients, and the attitudes of health professionals will be examined. Questions will be asked about training in new technologies, opinions of online psychotherapy, adjustment to therapy within the daily routine, the virtual and anonymous relationship with the therapist, the process of online communication, information necessary to make progress in therapy, process of working with the program, motivations and attitudes about treatment, expected consequences, normalisation of this type of therapy in primary care, changes in the physician-patient relationship, and resources and risks. A thematic content analysis from the grounded theory for interviews and an analysis of the discursive positions of participants based on the sociological model for focus groups will be performed. Discussion: Knowledge of the expectations, experiences, and attitudes of both patients and medical personnel regarding online interventions for depression can facilitate the implementation of this new psychotherapeutic tool. This qualitative investigation will provide thorough knowledge of the perceptions, beliefs, and values of patients and clinicians, which will be very useful for understanding how to implement this intervention method for depression.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Spatiotemporal Model-Based Estimation of High-Density Atrial Fibrillation Activation Map

  • Alcaine, Alejandro
  • de Groot, N.M.
  • Laguna, Pablo
  • Martínez, J.P.
  • Houben, R.P.
Examination of activation maps using multi-electrode array (MEA) sensors can help to understand the mechanisms underlying atrial fibrillation (AF). Classically, creation of activation maps starts with detection of local activation times (LAT) based on recorded unipolar electrograms. LAT detection has a limited robustness and accuracy, and generally requires manual edition. In general, LAT detection ignores spatiotemporal information of activation embedded in the relation between electrode signals on the MEA mapping sensor. In this work, a unified approach to construct activation maps by simultaneous analysis of activation patterns from overlapping clusters of MEA electrodes is proposed. An activation model fits on the measured data by iterative optimization of the model parameters based on a cost function. The accuracy of the estimated activation maps was evaluated by comparison with audited maps created by expertelectrophysiologists during sinus rhythm (SR) and AF. During SR recordings, 25 activation maps (3100 LATs) were automatically determined resulting in an average LAT estimation error of -0.66 ±2.00msand a correlation of ¿s=0.98compared to the expert reference. During AF recordings (235 maps, 28226 LATs), the estimation error was -0.83 ±6.02mswith only a slightly lower correlation (¿s=0.93). In conclusion, complex spatial activation patterns can be decomposed into local activation patterns derived from fitting an activation model, allowing the creation of smooth and comprehensive high-density activation maps.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

T-wave morphology restitution predicts sudden cardiac death in patients with chronic heart failure

  • Ramírez, J.
  • Orini, M.
  • Mincholé, A.
  • Monasterio, V.
  • Cygankiewicz, I.
  • de Luna, A.B.
  • Martínez, J.P.
  • Pueyo, E.
  • Laguna, P.
Background Patients with chronic heart failure are at high risk of sudden cardiac death (SCD). Increased dispersion of repolarization restitution has been associated with SCD, and we hypothesize that this should be reflected in the morphology of the T‐wave and its variations with heart rate. The aim of this study is to propose an electrocardiogram (ECG)‐based index characterizing T‐wave morphology restitution (TMR), and to assess its association with SCD risk in a population of chronic heart failure patients. Methods and Results Holter ECGs from 651 ambulatory patients with chronic heart failure from the MUSIC (MUerte Súbita en Insuficiencia Cardiaca) study were available for the analysis. TMR was quantified by measuring the morphological variation of the T‐wave per RR increment using time‐warping metrics, and its predictive power was compared to that of clinical variables such as the left ventricular ejection fraction and other ECG‐derived indices, such as T‐wave alternans and heart rate variability. TMR was significantly higher in SCD victims than in the rest of patients (median 0.046 versus 0.039, P<0.001). When TMR was dichotomized at TMR=0.040, the SCD rate was significantly higher in the TMR≥0.040 group (P<0.001). Cox analysis revealed that TMR≥0.040 was strongly associated with SCD, with a hazard ratio of 3.27 (P<0.001), independently of clinical and ECG‐derived variables. No association was found between TMR and pump failure death. Conclusions This study shows that TMR is specifically associated with SCD in a population of chronic heart failure patients, and it is a better predictor than clinical and ECG‐derived variables.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A multi-variate predictability framework to assess invasive cardiac activity and interactions during atrial fibrillation

  • Alcaine, Alejandro
  • Masè, Michela
  • Cristoforetti, Alessandro
  • Ravelli, Flavia
  • Nollo, Giandomenico
  • Laguna, Pablo
  • Martinez, Juan Pablo
  • Faes, Luca
Objective: This study introduces a predictability framework based on the concept of Granger causality (GC), in order to analyze the activity and interactions between different intracardiac sites during atrial fibrillation (AF). Methods: GC-based interactions were studied using a three-electrode analysis scheme with multi-variate autoregressive models of the involved preprocessed intracardiac signals. The method was evaluated in different scenarios covering simulations of complex atrial activity as well as endocardial signals acquired from patients. Results: The results illustrate the ability of the method to determine atrial rhythm complexity and to track and map propagation during AF. Conclusion: The proposed framework provides information on the underlying activation and regularity, does not require activation detection or postprocessing algorithms and is applicable for the analysis of any multielectrode catheter. Significance: The proposed framework can potentially help to guide catheter ablation interventions of AF.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Atrial fibrillation dynamics and ionic block effects in six heterogeneous human 3D virtual atria with distinct repolarization dynamics

  • Sánchez, Carlos
  • Bueno-Orovio, Alfonso
  • Pueyo, Esther
  • Rodríguez, Blanca
Atrial fibrillation (AF) usually manifests as reentrant circuits propagating through the whole atria creating chaotic activation patterns. Little is yet known about how differences in electrophysiological and ionic properties between patients modulate reentrant patterns in AF. The goal of this study is to quantify how variability in action potential duration (APD) at different stages of repolarization determines AF dynamics and their modulation by ionic block using a set of virtual whole-atria human models. Six human whole-atria models are constructed based on the same anatomical structure and fiber orientation, but with different electrophysiological phenotypes. Membrane kinetics for each whole-atria model are selected with distinct APD characteristics at 20, 50, and 90% repolarization, from an experimentally calibrated population of human atrial action potential models, including AF remodeling and acetylcholine parasympathetic effects. Our simulations show that in all whole-atria models, reentrant circuits tend to organize around the pulmonary veins and the right atrial appendage, thus leading to higher dominant frequency (DF) and more organized activation in the left atrium than in the right atrium. Differences in APD in all phases of repolarization (not only APD90) yielded quantitative differences in fibrillation patterns with long APD associated with slower and more regular dynamics. Long APD50 and APD20 were associated with increased interatrial conduction block and interatrial differences in DF and organization index, creating reentry instability and self-termination in some cases. Specific inhibitions of IK1, INaK, or INa reduce DF and organization of the arrhythmia by enlarging wave meandering, reducing the number of secondary wavelets, and promoting interatrial block in all six virtual patients, especially for the phenotypes with short APD at 20, 50, and/or 90% repolarization. This suggests that therapies aiming at prolonging the early phase of repolarization might constitute effective antiarrhythmic strategies for the pharmacological management of AF. In summary, simulations report significant differences in atrial fibrillatory dynamics resulting from differences in APD at all phases of repolarization.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Adaptive diffusion schemes for heterogeneous networks

  • Fernandez-Bes, Jesus
  • Arenas-García, Jerónimo
  • Silva, Magno T.M.
  • Azpicueta-Ruiz, Luis A.
In this paper, we deal with distributed estimation problems in diffusion networks with heterogeneous nodes, i.e., nodes that either implement different adaptive rules or differ in some other aspect such as the filter structure or length, or step size. Although such heterogeneous networks have been considered from the first works on diffusion networks, obtaining practical and robust schemes to adaptively adjust the combiners in different scenarios is still an open problem. In this paper, we study a diffusion strategy specially designed and suited to heterogeneous networks. Our approach is based on two key ingredients: 1) the adaptation and combination phases are completely decoupled, so that network nodes keep purely local estimations at all times and 2) combiners are adapted to minimize estimates of the network mean-square-error. Our scheme is compared with the standard adapt-Then-combine scheme and theoretically analyzed using energy conservation arguments. Several experiments involving networks with heterogeneous nodes show that the proposed decoupled adapt-Then-combine approach with adaptive combiners outperforms other state-of-The-Art techniques, becoming a competitive approach in these scenarios.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

3D fractals as SERS active platforms: Preparation and evaluation for gas phase detection of G-nerve agents

  • Lafuente, M.
  • Berenschot, E.J.W.
  • Tiggelaar, R.M.
  • Mallada, R.
  • Tas, N.R.
  • Pina, M.P.
One of the main limitations of the technique surface-enhanced Raman scattering (SERS) for chemical detection relies on the homogeneity, reproducibility and reusability of the substrates. In this work, SERS active platforms based on 3D-fractal microstructures is developed by combining corner lithography and anisotropic wet etching of silicon, to extend the SERS-active area into 3D, with electrostatically driven Au@citrate nanoparticles (NPs) assembly, to ensure homogeneous coating of SERS active NPs over the entire microstructured platforms. Strong SERS intensities are achieved using 3D-fractal structures compared to 2D-planar structures; leading to SERS enhancement factors for R6G superior than those merely predicted by the enlarged area effect. The SERS performance of Au monolayer-over-mirror configuration is demonstrated for the label-free real-time gas phase detection of 1.2 ppmV of dimethyl methylphosphonate (DMMP), a common surrogate of G-nerve agents. Thanks to the hot spot accumulation on the corners and tips of the 3D-fractal microstructures, the main vibrational modes of DMMP are clearly identified underlying the spectral selectivity of the SERS technique. The Raman acquisition conditions for SERS detection in gas phase have to be carefully chosen to avoid photo-thermal effects on the irradiated area.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

High-Precision Photothermal Ablation Using Biocompatible Palladium Nanoparticles and Laser Scanning Microscopy

  • Rubio-Ruiz, B.
  • Pérez-López, A.M.
  • Bray, T.L.
  • Lee, M.
  • Serrels, A.
  • Prieto, M.
  • Arruebo, M.
  • Carragher, N.O.
  • Sebastián, V.
  • Unciti-Broceta, A.
Herein, we report a straightforward method for the scalable preparation of Pd nanoparticles (Pd-NPs) with reduced inherent cytotoxicity and high photothermal conversion capacity. These Pd-NPs are rapidly taken up by cells and able to kill labeled cancer cells upon short exposure to near-infrared (NIR) light. Following cell treatment with Pd-NPs, ablated areas were patterned with high precision by laser scanning microscopy, allowing one to perform cell migration assays with unprecedented accuracy. Using coherent Raman microscopy, cells containing Pd-NPs were simultaneously ablated and imaged. This novel methodology was combined with intravital imaging to mediate microablation of cancerous tissue in tumor xenografts in mice.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Towards the mechanical characterization of abdominal wall by inverse analysis

  • Simón-Allué, R.
  • Calvo, B.
  • Oberai, A. A.
  • Barbone, P. E.
The aim of this study is to characterize the passive mechanical behaviour of abdominal wall in vivo in an animal model using only external cameras and numerical analysis. The main objective lies in defining a methodology that provides in vivo information of a specific patient without altering mechanical properties. It is demonstrated in the mechanical study of abdomen for hernia purposes. Mechanical tests consisted on pneumoperitoneum tests performed on New Zealand rabbits, where inner pressure was varied from 0 mmHg to 12 mmHg. Changes in the external abdominal surface were recorded and several points were tracked. Based on their coordinates we reconstructed a 3D finite element model of the abdominal wall, considering an incompressible hyperelastic material model defined by two parameters. The spatial distributions of these parameters (shear modulus and non linear parameter) were calculated by inverse analysis, using two different types of regularization: Total Variation Diminishing (TVD) and Tikhonov (H1). After solving the inverse problem, the distribution of the material parameters were obtained along the abdominal surface. Accuracy of the results was evaluated for the last level of pressure. Results revealed a higher value of the shear modulus in a wide stripe along the craneo-caudal direction, associated with the presence of linea alba in conjunction with fascias and rectus abdominis. Non linear parameter distribution was smoother and the location of higher values varied with the regularization type. Both regularizations proved to yield in an accurate predicted displacement field, but H1 obtained a smoother material parameter distribution while TVD included some discontinuities. The methodology here presented was able to characterize in vivo the passive non linear mechanical response of the abdominal wall.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Laser-assisted production of carbon-encapsulated Pt-Co alloy nanoparticles for preferential oxidation of carbon monoxide

  • Martinez, Gema
  • Malumbres, Ana
  • Lopez, Angela
  • Mallada, Reyes
  • Hueso, Jose L.
  • Santamaria, Jesus
C-encapsulated highly pure PtxCoy alloy nanoparticles have been synthesized by an innovative one-step in-situ laser pyrolysis. The obtained X-ray diffraction pattern and transmission electron microscopy images correspond to PtxCoy alloy nanoparticles with average diameters of 2.4 nm and well-established crystalline structure. The synthesized PtxCoy/C catalyst containing 1.5 wt% of PtxCoy nanoparticles can achieve complete CO conversion in the temperature range 125–175°C working at weight hourly space velocities (WHSV) of 30 L h-1g-1. This study shows the first example of bimetallic nanoalloys synthesized by laser pyrolysis and paves the way for a wide variety of potential applications and metal combinations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Stability Assessment of Regenerated Hierarchical ZSM-48 Zeolite Designed by Post-Synthesis Treatment for Catalytic Cracking of Light Naphtha

  • Ahmed, M. H. M.
  • Muraza, O.
  • Nakaoka, S.
  • Jamil, A. K.
  • Mayoral, A.
  • Sebastian, V.
  • Yamani, Z. H.
  • Masuda, T.
Hierarchical ZSM-48, a one-dimensional pore system zeolite with the presence of mesopores, was obtained by post-synthesis alkaline and acid treatments. Hierarchical ZSM-48 exhibited excellent hexane cracking activity compared to parent ZSM-48, which can be attributed to better diffusion as a result of the created mesoporosity. Moreover, the post-synthesis treatment allowed for manipulation of the distribution of active sites. Consequently, better stability and higher propylene selectivity were accomplished. The spent catalyst was regenerated by removing the deposited coke from the pores, and the regenerated catalyst was characterized again to investigate the recyclability of the hierarchical structure achieved. Parent ZSM-48 showed the same textural and acidic properties after regeneration, while the structure of the post-treated sample suffered from serious defects. The defects severely decreased the number of active sites as measured by pyridine Fourier transform infrared spectroscopy and caused major structural collapse as observed by scanning electron microscopy and transmission electron microscopy.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Arsenic exposure, diabetes-related genes and diabetes prevalence in a general population from Spain

  • Grau-Perez, M.
  • Navas-Acien, A.
  • Galan-Chilet, I.
  • Briongos-Figuero, L.S.
  • Morchon-Simon, D.
  • Bermudez, J.D.
  • Crainiceanu, C.M.
  • de Marco, G.
  • Rentero-Garrido, P.
  • Garcia-Barrera, T.
  • Gomez-Ariza, J.L.
  • Casasnovas, J.A.
  • Martin-Escudero, J.C.
  • Redon, J.
  • Chaves, F.J.
  • Tellez-Plaza, M.
Inorganic arsenic exposure may be associated with diabetes, but the evidence at low-moderate levels is not sufficient. Polymorphisms in diabetes-related genes have been involved in diabetes risk. We evaluated the association of inorganic arsenic exposure on diabetes in the Hortega Study, a representative sample of a general population from Valladolid, Spain. Total urine arsenic was measured in 1451 adults. Urine arsenic speciation was available in 295 randomly selected participants. To account for the confounding introduced by non-toxic seafood arsenicals, we designed a multiple imputation model to predict the missing arsenobetaine levels. The prevalence of diabetes was 8.3%. The geometric mean of total arsenic was 66.0 µg/g. The adjusted odds ratios (95% confidence interval) for diabetes comparing the highest with the lowest tertile of total arsenic were 1.76 (1.01, 3.09) and 2.14 (1.47, 3.11) before and after arsenobetaine adjustment, respectively. Polymorphisms in several genes including IL8RA, TXN, NR3C2, COX5A and GCLC showed suggestive differential associations of urine total arsenic with diabetes. The findings support the role of arsenic on diabetes and the importance of controlling for seafood arsenicals in populations with high seafood intake. Suggestive arsenic-gene interactions require confirmation in larger studies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Near infrared dye-labelled polymeric micro- and nanomaterials:: In vivo imaging and evaluation of their local persistence

  • Mendoza, Gracia
  • Ortiz De Solorzano, Isabel
  • Pintre, Inmaculada
  • García-Salinas, Sara
  • Sebastián, Víctor
  • Andreu, Vanesa
  • Gimeno, Marina
  • Arruebo, Manuel
The use of micro- and nanomaterials as carriers of therapeutic molecules can enhance the efficiency of treatments while avoiding side effects thanks to the development of controlled drug delivery systems. The binding of a dye to a drug or to a drug carrier has opened up a wide range of possibilities for an effective in vivo optical tracing of drug biodistribution by using non-invasive real-time technologies prior to their potential use as therapeutic vectors. Here, we describe the fluorescent tagging of polymeric micro- and nanomaterials based on poly(lactic-co-glycolic) acid and on the thermoresponsive poly(N-isopropylacrylamide) with the fluorescent probe IR-820 which was chemically modified for its covalent coupling to the materials. The chemical modification of the dye and the polymers yielded micro- and nanoparticulated labelled materials to be potentially used as drug depots of different therapeutic molecules. In vitro biological studies revealed their reduced cytotoxicity. A spatiotemporal in vivo micro- and nanoparticle tracking allowed the evaluation of the biodistribution of materials showing their local persistence and high biocompatibility after pathological studies. These results underline the suitability of these materials for the local, sustained, not harmful and/or on-demand drug delivery and the remarkable importance of evaluating the biodistribution of materials and tissue persistence for their use as local drug depots.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Eigenvalue-based time delay estimation of repetitive biomedical signals

  • Laguna, P.
  • Garde, A.
  • Giraldo, B.F.
  • Meste, O.
  • Jané, R.
  • Sörnmo, L.
The time delay estimation problem associated with an ensemble of misaligned, repetitive signals is revisited. Each observed signal is assumed to be composed of an unknown, deterministic signal corrupted by Gaussian, white noise. This paper shows that maximum likelihood (ML) time delay estimation can be viewed as the maximization of an eigenvalue ratio, where the eigenvalues are obtained from the ensemble correlation matrix. A suboptimal, one-step time delay estimate is proposed for initialization of the ML estimator, based on one of the eigenvectors of the inter-signal correlation matrix. With this approach, the ML estimates can be determined without the need for an intermediate estimate of the underlying, unknown signal. Based on respiratory flow signals, simulations show that the variance of the time delay estimation error for the eigenvalue-based method is almost the same as that of the ML estimator. Initializing the maximization with the one-step estimates, rather than using the ML estimator alone, the computation time is reduced by a factor of 5M when using brute force maximization (M denoting the number of signals in the ensemble), and a factor of about 1.5 when using particle swarm maximization. It is concluded that eigenanalysis of the ensemble correlation matrix not only provides valuable insight on how signal energy, jitter, and noise influence the estimation process, but it also leads to a one-step estimator which can make the way for a substantial reduction in computation time.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Exosome origin determines cell targeting and the transfer of therapeutic nanoparticles towards target cells

  • Sancho-Albero, M.
  • Navascués, N.
  • Mendoza, G.
  • Sebastián, V.
  • Arruebo, M.
  • Martín-Duque, P.
  • Santamaría, J.
Background: Exosomes are considered key elements for communication between cells, but very little is known about the mechanisms and selectivity of the transference processes involving exosomes released from different cells. Results: In this study we have investigated the transfer of hollow gold nanoparticles (HGNs) between different cells when these HGNs were loaded within exosomes secreted by human placental mesenchymal stem cells (MSCs). These HGNs were successfully incorporated in the MSCs exosome biogenesis pathway and released as HGNs-loaded exosomes. Time-lapse microscopy and atomic emission spectroscopy allowed us to demonstrate the selective transfer of the secreted exosomes only to the cell type of origin when studying different cell types including cancer, metastatic, stem or immunological cells. Conclusions: In this study we demonstrate the selectivity of in vitro exosomal transfer between certain cell types and how this phenomenon can be exploited to develop new specific vectors for advanced therapies. Specifically, we show how this preferential uptake can be leveraged to selectively induce cell death by light-induced hyperthermia only in cells of the same type as those producing the corresponding loaded exosomes. We describe how the exosomes are preferentially transferred to some cell types but not to others, thus providing a better understanding to design selective therapies for different diseases.[Figure not available: see fulltext.]
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Understanding blood oxygenation in a microfluidic meander double side membrane contactor

  • Malankowska, M.
  • Julian, I.
  • Pellejero, I.
  • Rho, H.S.
  • Schlautmann, S.
  • Tiggelaar, R.M.
  • Pina, M.P.
  • Gardeniers, H.J.G.E.
  • Mallada, R.
Lung disease is one of the most important causes of high morbidity in preterm infants. In this work, we study a simple and easy to fabricate microfluidic device that demonstrates a great potential for blood oxygenation. A meander type architecture with double side vertical membrane arrangement has been selected as reference model to investigate the oxygenation process. The design criteria for the fabricated devices has been to maximize the oxygen saturation level while ensuring the physiological blood flow in order to avoid thrombus formation and channel blockage during operation. A mathematical model for the oxygen transfer has been developed and validated by the experimental study. The obtained results demonstrate that blood was successfully oxygenated up to approximately 98% of O2 saturation and that the oxygen transfer rate at 1 mL/min blood flow rate was approximately 92 mL/min·m2. Finally, a sensitivity analysis of the key parameters, i.e. size of the channel, oxygen concentration in the gas phase and oxygen permeation properties of the membrane, is carried out to discuss the performance limits and to settle the guidelines for future developments.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

SPIONs' Enhancer Effect on Cell Transfection: An Unexpected Advantage for an Improved Gene Delivery System

  • Balcells, L.
  • Fornaguera, C.
  • Brugada-Vilà, P.
  • Guerra-Rebollo, M.
  • Meca-Cortés, Ó.
  • Martínez, G.
  • Rubio, N.
  • Blanco, J.
  • Santamaría, J.
  • Cascante, A.
  • Borrós, S.
The clinical implantation of gene therapy is hindered by the limitations of current gene delivery vectors, namely, safety issues regarding viral vectors and low transfection efficacy regarding nonviral vectors. Thus, the design of safe and efficient gene carriers is a key point for the success of such therapies. In addition, when employing genetically modified cells for further applications, the selection of successfully modified cells becomes crucial. To address these issues, we have developed multicomponent nanoparticles composed of poly(ß-amino ester) (pBAE) polymers, plasmid DNA, and superparamagnetic iron oxide nanoparticles (SPIONs). Whereas pBAEs were initially employed as safe and biocompatible carriers with improved transfection efficiency, as compared to commercial vectors, SPIONs were used because of their magnetic character that enables cell selection. Surprisingly, the results presented here revealed an unexpected enhancer effect of SPIONs on the transfection efficiency of pBAE/pDNA polyplexes in both permissive and reluctant to transfection cell lines. This unanticipated outcome, together with the allowance to perform a selective magnetic sorting of genetically modified cells without interfering in cell transfection, opens the door to SPION-containing nanoparticles as promising tools for cell therapy approaches.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Miniaturized multiparametric flexible platform for the simultaneous monitoring of ionic: Application in real urine

  • Moya, Ana
  • Illa, Xavi
  • Giménez, Ignacio
  • Lazo-Fernández, Yoskaly
  • Villa, Rosa
  • Errachid, Abdelhamid
  • Gabriel, Gemma
Biomonitoring is a research topic that has largely relied on cell culture systems. Recently, the development of “Organ-on-a-Chip” (OC) platforms and the need for a continuous monitoring of these systems has increased its interest. However, the biomonitorization in these systems is still at its infancy due to the difficulty to adapt the sensors to microfluidic OC systems. In this work we have fabricated a modular, versatile, scalable, multi-analyte sensing platform, which integrates dissolved oxygen (DO), Na+, K+ and pH sensors for monitoring their concentrations in small volume of biological fluids. The platform is fabricated by means of rapid prototyping techniques using polymeric substrates, and incorporates all the necessary elements to measure the four analytes. It was designed with four gold sensing electrodes, and integrates a gold counter electrode and an Ag/AgCl pseudo-reference electrode for the electrochemical measurements in small volumes (0.83 µL) of samples. The sensors featured good sensitivities of 3.60 ± 0.2 nA (mg L-1) for DO and 69 ± 1 mV decade-1 for pH. Na+ and K+ µISE exhibited sensitivities of 57 ± 1 mV decade-1 and 52 ± 2 mV decade-1, and low limits of detection 5 × 10-6 M and 0.5 × 10-5 M respectively. This platform allows the dynamic measurement of the biological fluids parameters simultaneously, in real time and with a rapid response. The versatility of the platform allows its adaptation in any microfluidic cells culture systems. The novel multi-sensor platform has been validated in controlled buffers and with artificial urine (AU). A proof-of-concept using real mice urine (RU) has been carried out, demonstrating the good behaviour of the multi-sensing platform.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Reseña (Review)

Current progress and challenges of nanoparticle-based therapeutics in pain management

  • Andreu, V.
  • Arruebo, M.
Pain is a widespread and growing health problem worldwide that exerts a considerable social and economic impact on both patients and healthcare systems and, therefore, on society in general. Although current treatment modalities include a wide variety of pharmacological and non-pharmacological approaches, due to the complexity of pain and individual differences in clinical response these options are not always effective in mitigating and relieving pain. In addition, some pain drugs such as non-steroidal anti-inflammatory drugs (NSAIDs), local anesthetics and opioids show several unfavorable side effects. Therefore, current research advances in this medical field are based on the development of potential treatments to address many of the unmet needs and to overcome the existing limitations in pain management. Nanoparticle drug delivery systems present an exciting opportunity as alternative platforms to improve efficacy and safety of medications currently in use. Herein, we review a broad range of nanoparticle formulations (organic nanostructures and inorganic nanoparticles), which have been developed to encapsulate an array of painkillers, paying special attention to the key advantages that these systems offer, (compared to the use of the free drug), as well as to the more relevant results of preclinical studies in animal models. Additionally, we will briefly discuss the impact of some of these nanoformulations in clinical trials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Over length quantification of the multiaxial mechanical properties of the ascending, descending and abdominal aorta using Digital Image Correlation

  • Peña, Juan A.
  • Corral, Victoria
  • Martínez, Miguel A.
  • Peña, Estefanía
In this paper, we hypothesize that the biaxial mechanical properties of the aorta may be dependent on arterial location. To demonstrate any possible position-related difference, our study analyzed and compared the biaxial mechanical properties of the ascending thoracic aorta, descending thoracic aorta and infrarenal abdominal aorta stemming from the same porcine subjects, and reported values of constitutive parameters for well-known strain energy functions, showing how these mechanical properties are affected by location along the aorta. When comparing ascending thoracic aorta, descending thoracic aorta and infrarenal abdominal aorta, abdominal tissues were found to be stiffer and highly anisotropic. We found that the aorta changed from a more isotropic to a more anisotropic tissue and became progressively less compliant and stiffer with the distance to the heart. We observed substantial differences in the anisotropy parameter between aortic samples where abdominal samples were more anisotropic and nonlinear than the thoracic samples. The phenomenological model was not able to capture the passive biaxial properties of each specific porcine aorta over a wide range of biaxial deformations, showing the best prediction root mean square error e=0.2621 for ascending thoracic samples and, especially, the worst for the infrarenal abdominal samples e=0.3780. The micro-structured model with Bingham orientation density function was able to better predict biaxial deformations (e=0.1372 for ascending thoracic aorta samples). The root mean square error of the micro-structural model and the micro-structured model with von Mises orientation density function were similar for all positions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Mechanical behavior of surgical meshes for abdominal wall repair: In vivo versus biaxial characterization

  • Simón-Allué, R.
  • Ortillés, A.
  • Calvo, B.
Despite the widespread use of synthetic meshes in the surgical treatment of the hernia pathology, the election criteria of a suitable mesh for specific patient continues to be uncertain. Thus, in this work, we propose a methodology to determine in advance potential disadvantages on the use of certain meshes based on the patient-specific abdominal geometry and the mechanical features of the certain meshes. To that purpose, we have first characterized the mechanical behavior of four synthetic meshes through biaxial tests. Secondly, two of these meshes were implanted in several New Zealand rabbits with a total defect previously created on the center of the abdominal wall. After the surgical procedure, specimen were subjected to in vivo pneumoperitoneum tests to determine the immediate post-surgical response of those meshes after implanted in a healthy specimen. Experimental performance was recorded by a stereo rig with the aim of obtaining quantitative information about the pressure-displacement relation of the abdominal wall. Finally, following the procedure presented in prior works (Simón-Allué et al., 2015, 2017), a finite element model was reconstructed from the experimental measurements and tests were computationally reproduced for the healthy and herniated cases. Simulations were compared and validated with the in vivo behavior and results were given along the abdominal wall in terms of displacements, stresses and strain. Mechanical characterization of the meshes revealed Surgipro TM as the most rigid implant and Neomesh SuperSoft® as the softer, while other two meshes (Neomesh Soft® Neopore®) remained in between. These two meshes were employed in the experimental study and resulted in similar effect in the abdominal wall cavity and both were close to the healthy case. Simulations confirmed this result while showed potential objections in the case of the other two meshes, due to high values in stresses or elongation that may led to discomfort in real tissue. The use of this methodology on human surgery may provide the surgeons with reliable and useful information to avoid certain meshes on specific-patient treatment.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Controlled release of bupivacaine using hybrid thermoresponsive nanoparticles activated via photothermal heating

  • Alejo, T.
  • Andreu, V.
  • Mendoza, G.
  • Sebastian, V.
  • Arruebo, M.
Near-infrared (NIR) responsive nanoparticles are of great interest in the biomedical field as antennas for photothermal therapy and also as triggers for on-demand drug delivery. The present work reports the preparation of hollow gold nanoparticles (HGNPs) with plasmonic absorption in the NIR region covalently bound to a thermoresponsive polymeric shell that can be used as an on-demand drug delivery system for the release of analgesic drugs. The photothermal heating induced by the nanoparticles is able to produce the collapse of the polymeric shell thus generating the release of the local anesthetic bupivacaine in a spatiotemporally controlled way. Those HGNPs contain a 10 wt.% of polymer and present excellent reversible heating under NIR light excitation. Bupivacaine released at physiological temperature (37 °C) showed a pseudo-zero order release that could be spatiotemporally modified on-demand after applying several pulses of light/temperature above and below the lower critical solution temperature (LCST) of the polymeric shell. Furthermore, the nanomaterials obtained did not displayed detrimental effects on four mammalian cell lines at doses up to 0.2 mg/mL. From the results obtained it can be concluded than this type of hybrid thermoresponsive nanoparticle can be used as an externally activated on-demand drug delivery system.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Automatic diagnosis of strict left bundle branch block using a wavelet-based approach

  • Martín-Yebra, A.
  • Martínez, J.P.
Patients with left bundle branch block (LBBB) are known to have a good clinical response to cardiac resynchronization therapy. However, the high number of false positive diagnosis obtained with the conventional LBBB criteria limits the effectiveness of this therapy, which has yielded to the definition of new stricter criteria. They require prolonged QRS duration, a QS or rS pattern in the QRS complexes at leads V1 and V2 and the presence of mid-QRS notch/slurs in 2 leads within V1, V2, V5, V6, I and aVL. The aim of this work was to develop and assess a fully-automatic algorithm for strict LBBB diagnosis based on the wavelet transform. Twelve-lead, high-resolution, 10-second ECGs from 602 patients enrolled in the MADIT-CRT trial were available. Data were labelled for strict LBBB by 2 independent experts and divided into training (n = 300) and validation sets (n = 302) for assessing algorithm performance. After QRS detection, a wavelet-based delineator was used to detect individual QRS waves (Q, R, S), QRS onsets and ends, and to identify the morphological QRS pattern on each standard lead. Then, multilead QRS boundaries were defined in order to compute the global QRS duration. Finally, an automatic algorithm for notch/slur detection within the QRS complex was applied based on the same wavelet approach used for delineation. In the validation set, LBBB was diagnosed with a sensitivity and specificity of Se = 92.9% and Sp = 65.1% (Acc = 79.5%, PPV = 74% and NPV = 89.6%). The results confirmed that diagnosis of strict LBBB can be done based on a fully automatic extraction of temporal and morphological QRS features. However, it became evident that consensus in the definition of QRS duration as well as notch and slurs definitions is necessary in order to guarantee accurate and repeatable diagnosis of complete LBBB.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Baroreflex sensitivity measured by pulse photoplethysmography

  • Lázaro, Jesús
  • Gil, Eduardo
  • Orini, Michele
  • Laguna, Pablo
  • Bailón, Raquel
Novel methods for assessing baroreflex sensitivity (BRS) using only pulse photoplethysmography (PPG) signals are presented. Proposed methods were evaluated with a data set containing electrocardiogram (ECG), blood pressure (BP), and PPG signals from 17 healthy subjects during a tilt table test. The methods are based on a surrogate of a index, which is defined as the power ratio of RR interval variability (RRV) and that of systolic arterial pressure series variability (SAPV). The proposed a index surrogates use pulse-to-pulse interval series variability (PPV) as a surrogate of RRV, and different morphological features of the PPG pulse which have been hypothesized to be related to BP, as series surrogates of SAPV. A time-frequency technique was used to assess BRS, taking into account the non-stationarity of the protocol. This technique identifies two time-varying frequency bands where RRV and SAPV (or their surrogates) are expected to be coupled: the low frequency (LF, inside 0.04–0.15 Hz range), and the high frequency (HF, inside 0.15–0.4 Hz range) bands. Furthermore, time-frequency coherence is used to identify the time intervals when the RRV and SAPV (or their surrogates) are coupled. Conventional a index based on RRV and SAPV was used as Gold Standard. Spearman correlation coefficients between conventional a index and its PPG-based surrogates were computed and the paired Wilcoxon statistical test was applied in order to assess whether the indices can find significant differences (p < 0.05) between different stages of the protocol. The highest correlations with the conventional a index were obtained by the a-index-surrogate based on PPV and pulse up-slope (PUS), with 0.74 for LF band, and 0.81 for HF band. Furthermore, this index found significant differences between rest stages and tilt stage in both LF and HF bands according to the paired Wilcoxon test, as the conventional a index also did. These results suggest that BRS changes induced by the tilt test can be assessed with high correlation by only a PPG signal using PPV as RRV surrogate, and PPG morphological features as SAPV surrogates, being PUS the most convenient SAPV surrogate among the studied ones.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

CFD-based comparison study of a new flow diverting stent and commercially-available ones for the treatment of cerebral aneurysms

  • Catalán-Echeverría, B.
  • Kelly, M.E.
  • Peeling, L.
  • Bergstrom, D.
  • Chen, X.
  • Malvè, M.
Flow-diverting stents (FDSs) show considerable promise for the treatment of cerebral aneurysms by diverting blood flow away from the aneurysmal sacs, however, post-treatment complications such as failure of occlusion and subarachnoid haemorrhaging remain and vary with the FDS used. Based on computational fluid dynamics (CFD), this study aimed to investigate the performance of a new biodegradable stent as compared to two metallic commercially available FDSs. CFD models were developed for an idealized cerebral artery with a sidewall aneurysmal sac treated by deploying the aforementioned stents of different porosities (90, 80, and 70%) respectively. By using these models, the simulation and analysis were performed, with a focus on comparing the local hemodynamics or the blood flow in the stented arteries as compared to the one without the stent deployment. For the comparison, we computed and compared the flow velocity, wall shear stress (WSS) and pressure distributions, as well as the WSS related indices, all of which are of important parameters for studying the occlusion and potential rupture of the aneurysm. Our results illustrate that the WSS decreases within the aneurysmal sac on the treated arteries, which is more significant for the stents with lower porosity or finer mesh. Our results also show that the maximum WSS near the aneurysmal neck increases regardless of the stents used. In addition, the WSS related indices including the time-average WSS, oscillatory shear index and relative residence time show different distributions, depending on the FDSs. Together, we found that the finer mesh stents provide more flow reduction and smaller region characterized by high oscillatory shear index, while the new stent has a higher relative residence time.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Polymeric micelle-mediated delivery of half-sandwich ruthenium(II) complexes with phosphanes derived from fluoroloquinolones for lung adenocarcinoma treatment

  • Koloczek, P.
  • Skórska-Stania, A.
  • Cierniak, A.
  • Sebastian, V.
  • Komarnicka, U.K.
  • Plotek, M.
  • Kyziol, A.
Novel half-sandwich ruthenium(II) complexes with aminomethyl(diphenyl)phosphine derived from fluoroloquinolones (RuPCp, RuPSf, RuPLm, RuPNr) were being investigated as alternatives to well-established metal-based chemotherapeutics. All compounds were characterized by elemental analysis, selected spectroscopic methods (i.e., absorption and fluorescence spectroscopies, ESI-MS, NMR, circular dichroizm), X-ray diffractometry, ICP-MS, and electrochemical techniques. To overcome low solubility, serious side effects connected with systemic cytotoxicity of ruthenium complexes, and acquiring the resistance of cancer cells, polymeric nanoformulations based on Pluronic P-123 micelles loaded with selected Ru(II) complexes were prepared and characterized. Resulting micelles (RuPCp_M, RuPNr_M) enabled efficient drug accumulation inside human lung adenocarcinoma (A549 tumor cell line), proved by confocal microscopy and ICP-MS analysis, allowing cytotoxic action. Studied complexes exhibited promising cytotoxicity in vitro with IC50 values significantly lower than the reference drug – cisplatin. The fluorescence spectroscopic data (CT-DNA titration, in vitro cell staining) together with analysis of DNA fragmentation (pBR322 plasmid, comet assay) provided clear evidence for the interaction with DNA inducing apoptotic cell death.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Sustainable Production of Drug-Loaded Particles by Membrane Emulsification

  • Albisa, A.
  • Piacentini, E.
  • Arruebo, M.
  • Sebastian, V.
  • Giorno, L.
As the field of drug delivery is expanding into consumer products, it is essential to advance in the development of efficient synthesis technologies while preserving, at the same time, human health and the environment for future generations. Here, the sustainable development of polymeric particles for drug delivery is described. Poly(ethylene glycol) methyl ether-block-poly(lactide-co-glycolide) based particles containing dexamethasone were produced by membrane emulsification-solvent diffusion methods. The ability of the synthesis process to control particle-size distribution and morphology and its green impactful (energy consumption, simple (sEF) and complete (cEF) E factor) were evaluated. Particles with sufficiently narrow distribution in their droplet size and mean diameter similar to the membrane pore diameter were produced by increasing the dispersed phase flux to 12.84 L h-1 m-2, minimizing the maximum shear stress to 1.12 Pa and the energy consumption to 3.96 × 105 J m-3. The impact of the solvent used on size distribution, particles morphology and green performance scores was also studied. More uniform particles, with dense and slightly rough surface, high encapsulation efficiency and drug loading were obtained by replacing dichloromethane with ethyl acetate. The E factor was also decreased by 80%. Results demonstrated that membrane emulsification is an environmentally improved method for the production of drug delivery systems with enormous impact in terms of formulation quality, energy consumption reduction and waste minimization.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

The influence of SiO2 doping on the Ni/ZrO2 supported catalyst for hydrogen production through the glycerol steam reforming reaction

  • Charisiou, N.D.
  • Papageridis, K.N.
  • Siakavelas, G.
  • Sebastian, V.
  • Hinder, S.J.
  • Baker, M.A.
  • Polychronopoulou, K.
  • Goula, M.A.
The glycerol steam reforming (GSR) reaction for H2 production was studied comparing the performance of Ni supported on ZrO2 and SiO2-ZrO2 catalysts. The surface and bulk properties were determined by ICP, BET, XRD, TPD, TPR, TPO, XPS, SEM and STEM-HAADF. It was suggested that the addition of SiO2 stabilizes the ZrO2 monoclinic structure, restricts the sintering of nickel particles and strengthens the interaction between Ni2+ species and support. It also removes the weak acidic sites and increases the amount of the strong acidic sites, whereas it decreases the amount of the basic sites. Furthermore, it influences the gaseous products’ distribution by increasing H2 yield and not favouring the transformation of CO2 in CO. Thus, a high H2/CO ratio can be achieved accompanying by negligible value for CO/CO2. From the liquid products quantitative analysis, it was suggested that acetone and acetaldehyde were the main products for the Ni/Zr catalyst, for 750 °C, whereas for the Ni/SiZr catalyst allyl alcohol was the only liquid product for the same temperature. It was also concluded that the Ni/SiZr sample seems to be more resistant to deactivation however, for both catalysts a substantial amount of carbon exists on the catalytic surface in the shape of carbon nanotubes and amorphous carbon.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Investigating the correlation between deactivation and the carbon deposited on the surface of Ni/Al2O3 and Ni/La2O3-Al2O3 catalysts during the biogas reforming reaction

  • Charisiou, N.D.
  • Tzounis, L.
  • Sebastian, V.
  • Hinder, S.J.
  • Baker, M.A.
  • Polychronopoulou, K.
  • Goula, M.A.
Ni/Al2O3 and Ni/La2O-Al2O3 catalysts were investigated for the biogas reforming reaction using CH4/CO2 mixtures with minimal dilution. Stability tests at various reaction temperatures were conducted and TGA/DTG, Raman, STEM-HAADF, HR-TEM, XPS techniques were used to characterize the spent samples. Graphitized carbon allotrope structures, carbon nanotubes (CNTs) and amorphous carbon were formed on all samples. Metallic Ni0 was recorded for all (XPS), whereas a strong peak corresponding to Ni2O3/NiAl2O4, was observed for the Ni/Al sample (650–750 °C). Stability tests confirm that the Ni/LaAl catalyst deactivates at a more gradual rate and is more active and selective in comparison to the Ni/Al for all temperatures. The Ni/LaAl exhibits good durability in terms of conversion and selectivity, whereas the Ni/Al gradually loses its activity in CH4 and CO2 conversion, with a concomitant decrease of the H2 and CO yield. It can be concluded that doping Al2O3 with La2O3 stabilizes the catalyst by (a) maintaining the Ni0 phase during the reaction, due to higher dispersion and stronger active phase-support interactions, (b) leading to a less graphitic and more defective type of deposited carbon and (c) facilitating the deposited carbon gasification due to the enhanced CO2 adsorption on its increased surface basic sites.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Autonomic dysfunction increases cardiovascular risk in the presence of sleep apnea

  • Milagro, Javier
  • Deviaene, Margot
  • Gil, Eduardo
  • Lazaro, Jesús
  • Buyse, Bertien
  • Testelmans, Dries
  • Borzée, Pascal
  • Willems, Rik
  • Van Huffel, Sabine
  • Bailón, Raquel
  • Varon, Carolina
The high prevalence of sleep apnea syndrome (SAS) and its direct relationship with an augmented risk of cardiovascular disease (CVD) have raised SAS as a primary public health problem. For this reason, extensive research aiming to understand the interaction between both conditions has been conducted. The advances in non-invasive autonomic nervous system (ANS) monitoring through heart rate variability (HRV) analysis have revealed an increased sympathetic dominance in subjects suffering from SAS when compared with controls. Similarly, HRV analysis of subjects with CVD suggests altered autonomic activity. In this work, we investigated the altered autonomic control in subjects suffering from SAS and CVD simultaneously when compared with SAS patients, as well as the possibility that ANS assessment may be useful for the early stage identification of cardiovascular risk in subjects with SAS. The analysis was performed over 199 subjects from two independent datasets during night-time, and the effects of the physiological response following an apneic episode, sleep stages, and respiration on HRV were taken into account. Results, as measured by HRV, suggest a decreased sympathetic dominance in those subjects suffering from both conditions, as well as in subjects with SAS that will develop CVDs, which was reflected in a significantly reduced sympathovagal balance (p < 0.05). In this way, ANS monitoring could contribute to improve screening and diagnosis, and eventually aid in the phenotyping of patients, as an altered response might have direct implications on cardiovascular health.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Respiratory Rate Derived from Pulse Photoplethysmographic Signal by Pulse Decomposition Analysis

  • Lazaro, J.
  • Kontaxis, S.
  • Bailon, R.
  • Laguna, P.
  • Gil, E.
A novel technique to derive respiratory rate from pulse photoplethysmographic (PPG) signals is presented. It exploits some morphological features of the PPG pulse that are known to be modulated by respiration: amplitude, slope transit time, and width of the main wave, and time to the first reflected wave. A pulse decomposition analysis technique is proposed to measure these features. This technique allows to decompose the PPG pulse into its main wave and its subsequent reflected waves, improving the robustness against noise and morphological changes that usually occur in long-term recordings. Proposed methods were evaluated with a data base containing PPG and plethysmography-based respiratory signals simultaneously recorded during a paced-breathing experiment. Results suggest that normal ranges of spontaneous respiratory rate (0.1-0.5 Hz) can be accurately estimated (median and interquartile range of relative error less than 5%) from PPG signals by using the studied features.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Unconstrained estimation of HRV indices after removing respiratory influences from heart rate

  • Varon, Carolina
  • Lázaro Plaza, Jesús
  • Bolea, Juan
  • Hernando, Alberto
  • Aguiló, Jordi
  • Gil, Eduardo
  • Van Huffel, Sabine
  • Bailón, Raquel
Objective: This paper proposes an approach to better estimate the sympathovagal balance (SB) and the respiratory sinus arrhythmia (RSA) after separating respiratory influences from the heart rate (HR). Methods: The separation is performed using orthogonal subspace projections and the approach is first tested using simulated HR and respiratory signals with different spectral properties. Then, RSA and SB are estimated during autonomic blockade and stress using the proposed approach and the classical heart rate variability (HRV) analysis. Both real and ECG-derived respiration (EDR) are used and the reliability of the EDR is evaluated. Results: Mean absolute percentage errors lower than 1% were obtained after removing previously known respiratory signals from simulated HR. The proposed indices were able to improve the quantification of SB during autonomic withdrawal. In the stress data, differences ( $p < 0.003 ) among relaxed and stressful phases were found with the proposed approach, using both the real respiration and the EDR, but they disappeared when using the classical HRV. Conclusion: A better assessment of the autonomic nervous system' response to pharmacological blockade and stress can be achieved after removing respiratory influences from HR, and this can be done using either the real respiration or the EDR. Significance: This work can be used to better identify vagal withdrawal and increased sympathetic activation when the classical HRV analysis fails due to the respiratory influences on HR. Furthermore, it can be computed using only the ECG, which is an advantage when developing wearable systems with limited number of sensors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Composite scaffold obtained by electro-hydrodynamic technique for infection prevention and treatment in bone repair

  • Aragón, J.
  • Feoli, S.
  • Irusta, S.
  • Mendoza, G.
Bone infection is a devastating condition resulting from implant or orthopaedic surgery. Therapeutic strategies are extremely complicated and may result in serious side effects or disabilities. The development of enhanced 3D scaffolds, able to promote efficient bone regeneration, combined with targeted antibiotic release to prevent bacterial colonization, is a promising tool for the successful repair of bone defects. Herein, polymeric electrospun scaffolds composed of polycaprolactone (PCL) nanofibres decorated with poly(lactic-co-glycolic acid) (PLGA) particles loaded with rifampicin were fabricated to achieve local and sustained drug release for more efficient prevention and treatment of infection. The release profile showed an initial burst of rifampicin in the first six hours, enabling complete elimination of bacteria. Sustained and long-term release was observed until the end of the experiments (28 days), facilitating a prolonged effect on the inhibition of bacterial growth, which is in agreement with the common knowledge concerning the acidic degradation of the microparticles. In addition, bactericidal effects against gram negative (Escherichia coli) and gram positive (Staphylococcus aureus) bacteria were demonstrated at concentrations of released rifampicin up to 58 ppm after 24 h, with greater efficacy against S. aureus (13 ppm vs 58 ppm for E. coli). Cell morphology and cytocompatibility studies highlighted the suitability of the fabricated scaffolds to support cell growth, as well as their promising clinical application for bone regeneration combined with prevention or treatment of bacterial infection.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Triangular and prism-shaped gold-zinc oxide plasmonic nanostructures: in situ reduction, assembly and full-range photocatalytic performance

  • Bottega-Pergher, B
  • Graus, J.
  • Bueno-Alejo, C.B.
  • Hueso, Jose L.
Gold-based nanocatalysts have been traditionally selected for multiple homogeneous and heterogeneous reactions of interest involving redox processes. Likewise, greener routes involving more efficient reactors and the use of inexpensive and nature-mimicking excitation sources have boosted the research on photocatalysts able to drive these chemical reactions upon excitation with multiple wavelength sources beyond the UV range. In the present work we report on a multi-step synthesis approach that implies the in situ generation of triangular and prism-shaped gold nanostructures with a localized surface plasmon resonance effect and their direct assembly onto a ZnO nanostructured semiconductor support. Different LED excitation sources in the whole UV-Vis-NIR range have been systematically selected to activate these hybrid materials in the selective reduction of p-nitrophenol (4-NP), a wellknown contaminant by-product. While ZnO becomes preferentially active in the UV window, the anisotropic shape of these gold plasmonic nanostructures helps to broaden the photocatalytic response of ZnO towards the visible and NIR range, being especially active under 460 nm blue light irradiation and expanding their potential application in multiple solar-driven catalytic processes of interest for decontamination and upgrading of toxic chemicals.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Failure damage mechanical properties of thoracic and abdominal porcine aorta layers and related constitutive modeling: phenomenological and microstructural approach

  • Peña Baquedano, Juan Antonio
  • Martínez, Miguel A.
  • Peña, Estefanía
Despite increasing experimental and analytical efforts to investigate the irreversible effects of arterial tissue failure, the underlying mechanisms are still poorly understood. The goal of this study was to characterize the failure properties of the intact wall and each separated layer (intima, media, and adventitia) of the descending thoracic and infrarenal abdominal aorta and to test the hypothesis that the failure properties of layer-separated tissue depend on the location of the aorta. To test this hypothesis, we performed uniaxial tests to study the mechanical behavior of both intact and layer-separated porcine aortic tissue samples taken from descending thoracic and infrarenal abdominal aorta until complete failure. The fracture stress is higher in the infrarenal abdominal aorta than in the equivalent descending thoracic aorta. It was also found that the extrapolation of the elastic mechanical properties from the physiological to the supra-physiological regime for characterizing the mechanical response of the aorta would be inappropriate. Finally, we report values of constitutive parameters using phenomenological and microstructural damage models based on continuum damage mechanics theory. The phenomenological damage model gives an excellent fit to the experimental data compared to the microstructural damage model. Although the fitting results of the phenomenological model are better, the microstructural models can include physically motivated aspects obtained from experiments.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Data-Driven Identification of Stochastic Model Parameters and State Variables: Application to the Study of Cardiac Beat-to-Beat Variability

  • Sampedro-Puente, David Adolfo
  • Fernández-Bes, Jesús
  • Virág, László
  • Varró, András
  • Pueyo, Esther
Enhanced spatiotemporal ventricular repolarization variability has been associated with ventricular arrhythmias and sudden cardiac death, but the involved mechanisms remain elusive. In this paper, a methodology for estimation of parameters and state variables of stochastic human ventricular cell models from input voltage data is proposed for investigation of repolarization variability. Methods: The proposed methodology formulates state-space representations based on developed stochastic cell models and uses the unscented Kalman filter to perform joint parameter and state estimation. Evaluation over synthetic and experimental data is presented. Results: Results on synthetically generated data show the ability of the methodology to: first, filter out measurement noise from action potential (AP) traces; second, identify model parameters and state variables from each of those individual AP traces, thus allowing robust characterization of cell-to-cell variability; and, third, replicate statistical population''s distributions of input AP-based markers, including dynamic markers quantifying beat-to-beat variability. Application onto experimental data demonstrates the ability of the methodology to match input AP traces while concomitantly inferring the characteristics of underlying stochastic cell models. Conclusion: A novel methodology is presented for estimation of parameters and hidden variables of stochastic cardiac computational models, with the advantage of providing a one-to-one match between each individual AP trace and a corresponding set of model characteristics. Significance: The proposed methodology can greatly help in the characterization of temporal (beat-to-beat) and spatial (cell-to-cell) variability in human ventricular repolarization and in ascertaining the corresponding underlying mechanisms, particularly in scenarios with limited available experimental data.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

The Hemodynamics of Aneurysms Treated with Flow-Diverting Stents Considering both Stent and Aneurysm/Artery Geometries

  • Cillo-Velasco, P.R.
  • Luciano, R.D.
  • Kelly, M.E.
  • Peeling, L.
  • Bergstrom, D.J.
  • Chen, X.B.
  • Malve, M.
Flow diverting stents are deployed to reduce the blood flow into the aneurysm, which would thereby induce thrombosis in the aneurysm sac; the stents prevent its rupture. The present study aimed to examine and quantify the impacts of different flow stents on idealized configurations of the cerebral artery. In our study, we considered a spherical sidewall aneurysm located on curved and tortuous idealized artery vessels and three stents with different porosities (70, 80 and 90%) for deployment. Using computational fluid dynamics, the local hemodynamics in the presence and absence of the stents were simulated, respectively, under the assumption that the blood flow was unsteady and non-Newtonian. The hemodynamic parameters, such as the intra-aneurysmal flow, velocity field and wall shear stress and its related indices, were examined and compared among the 12 cases simulated. The results illustrated that with the stent deployment, the intra-aneurysmal flow and the wall shear stress and its related indices were considerably modified depending on both stent and aneurysm/artery geometries, and that the intra-aneurysmal relative residence time increased rapidly with decreasing stent porosity in all the vessel configurations. These results also inform the rationale for selecting stents for treating aneurysms of different configurations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Time Course of Low-Frequency Oscillatory Behavior in Human Ventricular Repolarization Following Enhanced Sympathetic Activity and Relation to Arrhythmogenesis

  • Sampedro-Puente, David Adolfo
  • Fernandez-Bes, Jesús
  • Szentandrassy, Norbert
  • Nanasi, Péter
  • Taggart, Peter
  • Pueyo, Esther
Background and Objectives: Recent studies in humans and dogs have shown that ventricular repolarization exhibits a low-frequency (LF) oscillatory pattern following enhanced sympathetic activity, which has been related to arrhythmic risk. The appearance of LF oscillations in ventricular repolarization is, however, not immediate, but it may take up to some minutes. This study seeks to characterize the time course of the action potential (AP) duration (APD) oscillatory behavior in response to sympathetic provocations, unveil its underlying mechanisms and establish a potential link to arrhythmogenesis under disease conditions. Materials and Methods: A representative set of human ventricular computational models coupling cellular electrophysiology, calcium dynamics, β-adrenergic signaling, and mechanics was built. Sympathetic provocation was modeled via phasic changes in β-adrenergic stimulation (β-AS) and mechanical stretch at Mayer wave frequencies within the 0.03–0.15 Hz band. Results: Our results show that there are large inter-individual differences in the time lapse for the development of LF oscillations in APD following sympathetic provocation, with some cells requiring just a few seconds and other cells needing more than 3 min. Whereas, the oscillatory response to phasic mechanical stretch is almost immediate, the response to β-AS is much more prolonged, in line with experimentally reported evidences, thus being this component the one driving the slow development of APD oscillations following enhanced sympathetic activity. If β-adrenoceptors are priorly stimulated, the time for APD oscillations to become apparent is remarkably reduced, with the oscillation time lapse being an exponential function of the pre-stimulation level. The major mechanism underlying the delay in APD oscillations appearance is related to the slow IKs phosphorylation kinetics, with its relevance being modulated by the IKs conductance of each individual cell. Cells presenting short oscillation time lapses are commonly associated with large APD oscillation magnitudes, which facilitate the occurrence of pro-arrhythmic events under disease conditions involving calcium overload and reduced repolarization reserve. Conclusions: The time course of LF oscillatory behavior of APD in response to increased sympathetic activity presents high inter-individual variability, which is associated with different expression and PKA phosphorylation kinetics of the IKs current. Short time lapses in the development of APD oscillations are associated with large oscillatory magnitudes and pro-arrhythmic risk under disease conditions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Contribución de congreso (ConferenceOutput)

The Effect of Hydrogen Peroxide on the synthesis of Terephthalate-Based metal-organic frameworks

  • Monteagudo-Olivan, Rebeca
  • Jiménez-Fernández, Isabel
  • López-Ram-de-Viu, Pilar
  • Sebastian, Víctor
  • Coronas, Joaquín
Metal-organic frameworks (MOFs) are versatile materials for applications in fields including the environment, energy and health. A synthetic route for improving the formation of MOFs has been developed and is triggered by hydrogen peroxide (H2O2) to promote the formation of terephthalate-based MOFs of MIL-53 and MIL-68 types, specifically those made from Fe3+ and Al3+ and mixtures of both. Different characterization techniques (TGA, XRD, SEM, TEM, N2 porosimetry and Raman, mass and NMR spectroscopies) gave insights into the effect of H2O2 on the MOF synthesis. The reaction yield was significantly improved (the highest yield being 74 % for MIL-53(Al)), while crystallinity and N2 adsorption properties were mostly maintained for phases based on Al and Al/Fe. Furthermore, a reaction mechanism was envisaged from the mass spectroscopic analysis of the reaction solutions, thus suggesting that H2O2 plays the role of a µ-hydroxo bridge promoter, favoring the link between terephthalate ligands and aluminum-containing species to give rise to the µ-carboxylate bridges, leading to a faster growth of the final MOF, and offering a novel MOF synthesis approach.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A one-pot route for the synthesis of Au@Pd/PMo12/rGO as a dual functional electrocatalyst for ethanol electro-oxidation and hydrogen evolution reaction

  • Ahmadpour, A.
  • Khadempir, S.
  • Ashraf, N.
  • Mitchell, S. G.
  • Ahangari, M. H.
An in situ one-pot synthetic route for the synthesis of a Au@Pd/PMo12/reduced graphene oxide (rGO) nanocomposite is presented, where the Keggin-type polyoxometalate phosphomolybdic acid (PMo12) is used as both reducing and stabilizing agent. High-angle annular dark-field scanning transmission electron microscopy (HAADT-STEM), transmission electron microscopy (TEM), and X-ray diffraction analysis were applied to fully characterize the core-shell structure of Au@Pd/PMo12 on the rGO matrix. Electrochemical studies showed how this nanocomposite acts as a dual electrocatalyst for the ethanol electro-oxidation reaction (EOR) and the hydrogen evolution reaction (HER). For the EOR, the Au@Pd/PMo12/rGO electrocatalyst offers a low onset potential of -0.77 V vs. Ag/AgCl and a high peak current density of 41 mA cm-2 in alkaline medium. This feature is discussed via detailed cyclic voltammetry (CV) studies illustrating how the superior performance of the synthetic nanocomposite could be attributed to the synergistic effect of Au, Pd, PMo12 and rGO. Moreover, it has been confirmed that the proposed electrocatalyst exhibits low overpotentials for 10 mA cm-2 current density (¿10) in different pH media. The values of ¿10 were -109, 300 and 250 mV vs. RHE in acidic, basic and neutral media, respectively. Also, the ability of the electrocatalyst to provide high HER current density and its remarkable stability have been confirmed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Mathematical formulation and parametric analysis of in vitro cell models in microfluidic devices: application to different stages of glioblastoma evolution

  • Ayensa-Jiménez, J.
  • Pérez-Aliacar, M.
  • Randelovic, T.
  • Oliván, S.
  • Fernández, L.
  • Sanz-Herrera, J.A.
  • Ochoa, I.
  • Doweidar, M.H.
  • Doblaré, M.
In silico models and computer simulation are invaluable tools to better understand complex biological processes such as cancer evolution. However, the complexity of the biological environment, with many cell mechanisms in response to changing physical and chemical external stimuli, makes the associated mathematical models highly non-linear and multiparametric. One of the main problems of these models is the determination of the parameters’ values, which are usually fitted for specific conditions, making the conclusions drawn difficult to generalise. We analyse here an important biological problem: the evolution of hypoxia-driven migratory structures in Glioblastoma Multiforme (GBM), the most aggressive and lethal primary brain tumour. We establish a mathematical model considering the interaction of the tumour cells with oxygen concentration in what is called the go or grow paradigm. We reproduce in this work three different experiments, showing the main GBM structures (pseudopalisade and necrotic core formation), only changing the initial and boundary conditions. We prove that it is possible to obtain versatile mathematical tools which, together with a sound parametric analysis, allow to explain complex biological phenomena. We show the utility of this hybrid “biomimetic in vitro-in silico” platform to help to elucidate the mechanisms involved in cancer processes, to better understand the role of the different phenomena, to test new scientific hypotheses and to design new data-driven experiments.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Influence of the Stimulation Current on the Differences between Cell and Tissue Electrophysiological Simulations

  • Monasterio, V.
  • Pueyo, E.
  • Rodríguez-Matas, J.F.
  • Carro, J.
This study compares stimulation waveforms for single-cell simulations. The alternatives include monophasic and biphasic current pulses, and a new waveform that resembles the transmembrane current responsible for conduction in tissue. Results indicate that the new stimulation produces the lowest mismatch between action potential markers simulated in cell and in tissue. In comparison with the monophasic stimulation, the new stimulation reduced cell-fiber differences by 99% for triangulation, by 95% for maximum transmembrane voltage, and by 76% for the maximum voltage slope. In conclusion, the new stimulation waveform could help to improve the trustworthiness of single-cell simulations in studies involving tissue-derived markers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Heart Rate Variability Monitoring Using a Wearable Armband

  • Lázaro, J.
  • Reljin, N.
  • Noh, Y.
  • Laguna, P.
  • Chon, K.H.
A wearable electrocardiogram (ECG) monitor is evaluated as heart rate variability (HRV) monitor. The device consists of an armband designed to be worn on the left upper arm which provides 3 ECG channels based on 3 pairs of dry (no hydrogel) electrodes. Armband-ECG and conventional-Holter-ECG signals were simultaneously recorded from 14 subjects during 5 minutes in supine position. Spacial principal component analysis was used to obtain a unique armband ECG signal in which the electromyogram contribution is attenuated. QRS complexes were automatically detected. Five traditional HRV parameters were derived: SDNN, RMSSD, pNN50, and powers within low frequency (LF, [0.04, 0.15] Hz) and high frequency (HF, [0.15, 0.4] Hz) bands. The Pearson''s correlation coefficient between the measurements from the armband device and the measures from the Holter device was computed. Results show very high correlations (1.0000, 0.9999, 0.9984, 1.0000, and 0.9999 for SDNN, RMSSD, pNN50, and powers at LF and HF, respectively), suggesting that the quality of armband-ECG signals is enough to estimate HRV parameters during stationary movement restricted conditions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Heart Rate Variability Analysis Assessment for Asthma Control Stratification

  • Milagro, J.
  • Soto, L.
  • Giner, J.
  • Varon, C.
  • Laguna, P.
  • Plaza, V.
  • Gil, E.
  • Bailón, R.
Autonomic nervous system (ANS) has been suggested to play a major role in the pathogenesis of asthma. This hypothesis has motivated large research, revealing a reduced modulation of the heart rate in subjects with uncontrolled asthma, when compared to asthmatics with controlled symptomatology. In this work, we assessed ANS activity through heart rate variability analysis in a group of asthmatics classified attending to the control of their symptoms. This information was later used for training a logistic regression classifier aiming at differentiating between the levels of control in asthmatic patients. The accuracy of the classifier improved when including ANS information (71.77%, versus 64.73% when only clinical parameters were considered), suggesting that ANS assessment could contribute to better non-invasive asthma monitoring.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Contribución de congreso (ConferenceOutput)

Cardiovascular Changes Induced by Acute Emotional Stress Estimated from the Pulse Transit Time Difference

  • Armañac, P.
  • Kontaxis, P.
  • Lázaro, J.
  • Laguna, P.
  • Bailón, R.
  • Gil, E.
In the present work, the difference between arrival times of photoplethysmographic (PPG) pulses from two different sites of the arterial tree (PTTD) is calculated. As the PTTD is considered to be related with arterial pulse wave velocity, an evaluation of it''s usefulness to identify states of acute mental stress is performed. A subset of fourteen healthy volunteers undergoing a stress protocol was analysed and a statistical test was carried out to evaluate the validity of the proposed method. The results showed that the standard deviation of the PTTD had sufficient statistical capacity to discern between states of stress and relaxation. Furthermore, a generalised descending trend of the mean PTTD can be seen from relaxation to stress.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Autonomic Nervous System Response to Heat Stress Exposure by Means of Heart Rate Variability

  • Kontaxis, S.
  • Bailon, R.
  • Rapalis, A.
  • Brazaitis, M.
  • Cernych, M.
  • Lazaro, J.
  • Laguna, P.
  • Gil, E.
  • Marozas, V.
In this study, a heart rate variability (HRV) analysis guided by respiration is conducted to assess changes in autonomic nervous system (ANS) regulation during pronounced heat stress induced by repetitive exposures to dry sauna in 13 young healthy subjects. The spectral power at the low frequency (LF) band [0.04, 0.15] Hz and at the high frequency band centered around the mean respiratory rate, estimated from ECG-derived respiration signals, are studied. The mean heart rate (HR), the total power of HRV, and the normalized LF power are also analyzed.Results show that mean HR and normalized LF power increase significantly after basal stage, not only during the sauna sessions, but also at the intermediate short rest stages and recovery phase after 30 min. A significant reduction in the total power of HRV during all sauna sessions is observed, while an increased power in LF band is shown only during recovery which might be related to improved cardiac function (increased cardiac output and reduced peripheral vascular resistance) after heat exposure. Respiratory rate does not change significantly during the protocol but a negative trend at stress stages may indicate a reverse reaction against an over-activation of the sympathetic branch. In conclusion, exposure to heat stress shifts sympathovagal balance of ANS toward sympathetic dominance that increases HR and diminishes HRV.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Cardiorespiratory Coupling in Asthmatic Children

  • Milagro, J.
  • Gracia, J.
  • Seppä, V.P.
  • Karjalainen, J.
  • Paassilta, M.
  • Orini, M.
  • Gil, E.
  • Bailón, R.
  • Viik, J.
The relationship between cardiac and respiratory autonomic control has been suggested to be altered in several respiratory disorders. However, and despite the increasing prevalence of asthma, there are not studies assessing the cardiorespiratory coupling (CRC) with respect to the asthmatic status. Since altered autonomic control has been suggested to play a major role in asthma, in this work overnight CRC was assessed in a group of 67 children who underwent a three-month inhaled corticosteroids treatment. After treatment completion, CRC was reduced (p < 0.005) in the subjects without or with a low risk of asthma, whereas it kept unchanged in those with a worse prognosis, suggesting that an altered interaction between cardiac and respiratory activity might be related with an increased risk of asthma.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Role of oxygen concentration in the osteoblasts behavior: A finite element model

  • Urdeitx, Pau
  • Farzaneh, Solmaz
  • Mousavi, S. Jamaleddin
  • Doweidar, Mohamed H.
Oxygen concentration plays a key role in cell survival and viability. Besides, it has important effects on essential cellular biological processes such as cell migration, differentiation, proliferation and apoptosis. Therefore, the prediction of the cellular response to the alterations of the oxygen concentration can help significantly in the advances of cell culture research. Here, we present a 3D computational mechanotactic model to simulate all the previously mentioned cell processes under different oxygen concentrations. With this model, three cases have been studied. Starting with mesenchymal stem cells within an extracellular matrix with mechanical properties suitable for its differentiation into osteoblasts, and under different oxygen conditions to evaluate their behavior under normoxia, hypoxia and anoxia. The obtained results, which are consistent with the experimental observations, indicate that cells tend to migrate toward zones with higher oxygen concentration where they accelerate their differentiation and proliferation. This technique can be employed to control cell migration toward fracture zones to accelerate the healing process. Besides, as expected, to avoid cell apoptosis under conditions of anoxia and to avoid the inhibition of the differentiation and proliferation processes under conditions of hypoxia, the state of normoxia should be maintained throughout the entire cell-culture process.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Analysis of the parametric correlation in mathematical modeling of in vitro glioblastoma evolution using copulas

  • Ayensa-Jiménez, J.
  • Pérez-Aliacar, M.
  • Randelovic, T.
  • Sanz-Herrera, J.A.
  • Hamdy Doweidar, M.
  • Doblaré, M.
Modeling and simulation are essential tools for better understanding complex biological processes, such as cancer evolution. However, the resulting mathematical models are often highly non-linear and include many parameters, which, in many cases, are difficult to estimate and present strong correlations. Therefore, a proper parametric analysis is mandatory. Following a previous work in which we modeled the in vitro evolution of Glioblastoma Multiforme (GBM) under hypoxic conditions, we analyze and solve here the problem found of parametric correlation. With this aim, we develop a methodology based on copulas to approximate the multidimensional probability density function of the correlated parameters. Once the model is defined, we analyze the experimental setting to optimize the utility of each configuration in terms of gathered information. We prove that experimental configurations with oxygen gradient and high cell concentration have the highest utility when we want to separate correlated effects in our experimental design. We demonstrate that copulas are an adequate tool to analyze highly-correlated multiparametric mathematical models such as those appearing in Biology, with the added value of providing key information for the optimal design of experiments, reducing time and cost in in vivo and in vitro experimental campaigns, like those required in microfluidic models of GBM evolution.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Use of computational fluid dynamics to compare upper airway pressures and airflow resistance in brachycephalic, mesocephalic, and dolichocephalic dogs

  • Fernández-Parra, R.
  • Pey, P.
  • Zilberstein, L.
  • Malvè, M.
Brachycephalic dog breeds are prone to breathing difficulties because of their upper airway anatomy. Several surgical techniques exist to correct anatomical pathologies and common surgical approaches aim to correct functional abnormalities in the nares and/or the soft palate. However, further research is needed to improve clinical outcomes. This study evaluated air pressure and airflow resistance in the upper airways and trachea in nine sedated, sternally recumbent dogs of different skull types (dolichocephalic, n = 3; mesocephalic, n = 3; brachycephalic, n = 3). CT images were acquired from the nostrils to the caudal border of the lungs and geometrical reconstruction of the upper airway and trachea was performed. Analysis of computational fluid dynamics was performed using inspiratory flow adapted to bodyweight for each dog. Flow (L/min) and pressure (cmH2O) were computed for the entire upper airway and trachea. Resistance (cmH2O/L/min) was calculated using pressure differences between the nose, larynx, and trachea. In this pilot study, statistical comparisons were not performed. Pressure maps, airflow, and resistance were similar in dolichocephalic and mesocephalic breeds. Median pressure difference (3.76 cmH2O) and resistance (0.154 cmH2O/L/min) between the nose and larynx were numerically higher in brachycephalic dogs than in other breeds (0.45 cmH2O and 0.016 cmH2O/L/min, respectively). Median pressure difference (0.205 cmH2O) and resistance (0.009 cmH2O/L/min) between the larynx and trachea was numerically similar in all dogs, except for the English bulldog. The methodology used in this preliminary study to quantify airflow characteristics such as pressure and resistance could improve the understanding of brachycephalic obstruction airway syndrome.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Feasibility of atrial fibrillation detection from a novel wearable armband device

  • Bashar, Syed Khairul
  • Hossain, Md-Billal
  • Lázaro Plaza, Jesús
  • Ding, Eric Y.
  • Noh, Yeonsik
  • Cho, Chae Ho
  • McManus, David D.
  • Fitzgibbons, Timothy P.
  • Chon, Ki H.
Background Atrial fibrillation (AF) is the world’s most common heart rhythm disorder and even several minutes of AF episodes can contribute to risk for complications, including stroke. However, AF often goes undiagnosed owing to the fact that it can be paroxysmal, brief, and asymptomatic. Objective To facilitate better AF monitoring, we studied the feasibility of AF detection using a continuous electrocardiogram (ECG) signal recorded from a novel wearable armband device. Methods In our 2-step algorithm, we first calculate the R-R interval variability–based features to capture randomness that can indicate a segment of data possibly containing AF, and subsequently discriminate normal sinus rhythm from the possible AF episodes. Next, we use density Poincaré plot-derived image domain features along with a support vector machine to separate premature atrial/ventricular contraction episodes from any AF episodes. We trained and validated our model using the ECG data obtained from a subset of the MIMIC-III (Medical Information Mart for Intensive Care III) database containing 30 subjects. Results When we tested our model using the novel wearable armband ECG dataset containing 12 subjects, the proposed method achieved sensitivity, specificity, accuracy, and F1 score of 99.89%, 99.99%, 99.98%, and 0.9989, respectively. Moreover, when compared with several existing methods with the armband data, our proposed method outperformed the others, which shows its efficacy. Conclusion Our study suggests that the novel wearable armband device and our algorithm can be used as a potential tool for continuous AF monitoring with high accuracy.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Electrocardiogram Derived Respiration for Tracking Changes in Tidal Volume from a Wearable Armband

  • Lazaro, Jesús
  • Reljin, N.
  • Bailón, Raquel
  • Gil, Eduardo
  • Noh, Y.
  • Laguna, Pablo
  • Chon, K.H.
A pilot study on tracking changes in tidal volume (TV) using ECG signals acquired by a wearable armband is presented. The wearable armband provides three ECG channels by using three pairs of dry electrodes, resulting in a device that is convenient for long-term daily monitoring. An additional ECG channel was derived by computing the first principal component of the three original channels (by means of principal component analysis). Armband and spirometer signals were simultaneously recorded from five healthy subjects who were instructed to breathe with varying TV. Three electrocardiogram derived respiration (EDR) methods based on QRS complex morphology were studied: the QRS slopes range (SR), the R-wave angle (), and the R-S amplitude (RS). The peak-to-peak amplitudes of these EDR signals were estimated as surrogates for TV, and their correlations with the reference TV (estimated from the spirometer signal) were computed. In addition, a multiple linear regression model was calculated for each subject, using the peak-to-peak amplitudes from the three EDR methods from the four ECG channels. Obtained correlations between TV and EDR peak-to-peak amplitude ranged from 0.0448 up to 0.8491. For every subject, a moderate correlation (>0.5) was obtained for at least one EDR method. Furthermore, the correlations obtained for the subject-specific multiple linear regression model ranged from 0.8234 up to 0.9154, and the goodness of fit was 0.73±0.07 (median ± standard deviation). These results suggest that the peak-to-peak amplitudes of the EDR methods are linearly related to the TV. opening the possibility of estimating TV directly from an armband ECG device.Clinical Relevance - This opens the door to possible continuous monitoring of TV from the armband by using EDR.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Antimicrobial Wound Dressings against Fluorescent and Methicillin-Sensitive Intracellular Pathogenic Bacteria

  • Garcia-Salinas, Sara
  • Gámez, Enrique
  • Landa, Guillermo
  • Arruebo, Manuel
  • Irusta, Silvia
  • Mendoza, Gracia
There is limited evidence indicating that drug-eluting dressings are clinically more effective than simple conventional dressings. To shed light on this concern, we have performed evidence-based research to evaluate the antimicrobial action of thymol (THY)-loaded antimicrobial dressings having antibiofilm forming ability, able to eradicate intracellular and extracellular pathogenic bacteria. We have used four different Staphylococcus aureus strains, including the ATCC 25923 strain, the Newman strain (methicillin-sensitive strain, MSSA) expressing the coral green fluorescent protein from the vector pCN47, and two clinical reference strains, Newman-(MSSA) and USA300-(methicillin-resistant strain), as traceable models of pathogenic bacteria commonly infecting skin and soft tissues. Compared to non-loaded dressings, THY-loaded polycaprolactone-based electrospun dressings were also able to eliminate pathogenic bacteria in coculture models based on infected murine macrophages. In addition, by using confocal microscopy and the conventional microdilution plating method, we corroborated the successful ability of THY in preventing also biofilm formation. Herein, we demonstrated that the use of wound dressings loaded with the natural monoterpenoid phenol derivative THY are able to eliminate biofilm formation and intracellular methicillin-sensitive S aureus more efficiently than with their corresponding THY-free counterparts.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Effect of haptic geometry in C-loop intraocular lenses on optical quality

  • Cabeza-Gil, I.
  • Pérez-Gracia, J.
  • Remón, L.
  • Calvo, B.
The biomechanical stability of intraocular lenses (IOLs) must achieve high-quality optical performance and clinical outcomes after cataract surgery. For this reason, the quality and performance features of the IOLs should be previously analysed following the Standard ISO 11979-2 and ISO 11979-3. The ISO 11979-3 tries to reproduce the behaviour of the IOL in the capsular bag by compressing the lens between two clamps. With this test, it has been demonstrated that the haptic design is a crucial factor to obtain biomechanical stability. Hence, the main goal of this study was to design an aberration-free aspheric IOL and to study the influence of haptic geometry on the optical quality. For that purpose, 5 hydrophobic IOLs with different haptic design were manufactured and their biomechanical stability was compared experimentally and numerically. The IOLs were classified as stiff and flexible designs depending on their haptic geometry. The biomechanical response was measured by means of the compression force, the axial displacement, the angle of contact or contact area, the decentration, the tilt and the strain energy. The results suggest that in vitro and in silico compression tests present similar responses for the IOLs analysed. Furthermore, the flexible IOL designs presented better biomechanical stability than stiff designs. These results were correlated with the optical performance, where the optical quality decreases with worst biomechanical stability. This numerical methodology provides an indisputable advance regarding IOL designs, leading to reduce costs by exploring a feasible space of solutions during the product design process and prior to manufacturing.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Experimental evaluation of the injection force exerted in intraocular lens delivery with syringe-type injectors

  • Cabeza-Gil, I.
  • Ríos-Ruiz, I.
  • Calvo, B.
The process of intraocular lens (IOL) delivery within the capsular bag during cataract surgery is crucial, as the integrity of the IOL, the injector and the ocular structures should be preserved at all times. This study aims to obtain the main parameters that affect the injection force exerted in the ejection of an intraocular lens (IOL) through syringe-type injectors. For that purpose, ejection tests were carried out in vitro, measuring the resistance force throughout the entire delivery process. The effect of IOL material, haptic design, IOL thickest area and ophthalmic viscosurgical device (OVD) was studied by ejecting seven IOLs with four syringe-type injectors of different sizes, 3.0, 2.2 and 1.8 mm. In all injectors, plate hydrophilic IOLs present the lowest resistance forces; hydrated C-loop hydrophobic IOLs present higher forces and the C-loop hydrophobic IOL in dry conditions presents the highest resistance forces. All IOLs could be properly delivered with an injector size of 2.2 mm, making injector sizes of 3.0 mm outdated. The injector size of 1.8 mm damaged several IOLs. IOL material and cartridge nozzle size were the most influential parameters in IOL delivery. IOL thickest area was also relevant but in a lesser extent whereas IOL haptic design was not as relevant.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A numerical investigation of changes in lens shape during accommodation

  • Cabeza-Gil, I.
  • Grasa, J.
  • Calvo, B.
The purpose of this study was to investigate how the mechanical properties and geometry of the lens influence the changes in lens shape during accommodation. To do so, ex vivo stretching tests of the isolated lens were simulated via finite element analysis. In these tests, the lens is stretched from the accommodated state to the non-accommodated state. Several key characteristics of the lens were studied: the stiffness gradient of the lens material, the distribution of the capsule thickness, the mechanical properties of the capsule and the material comprising the lens, nucleus and cortex, and the influence of two different age-related lens geometries (17 and 29 y/o subjects). To determine the effects on the changes in lens shape during accommodation, changes in the anterior and posterior radius, the lens and nucleus thicknesses and the equatorial lens diameter were analysed. The results suggest that multiple factors exert statistically significant influences on how the lens changes its shape, but two factors predominate over the rest: the stiffness ratio between the nucleus and cortex and the stiffness of the capsule, specifically the posterior surface.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

On-POM Ring-Opening Polymerisation of N-Carboxyanhydrides

  • Soria-Carrera, H.
  • Franco-Castillo, I.
  • Romero, P.
  • Martin, S.
  • de la Fuente, J.M.
  • Mitchell, S.G.
  • Martin-Rapun, R.
The ring-opening polymerisation of a-amino acid N-carboxyanhydrides (NCAs) offers a simple and scalable route to polypeptides with predicted and narrow molecular weight distributions. Here we show how polyoxometalates (POMs)-redox-active molecular metal-oxide anions-can serve as inorganic scaffold initiators for such NCA polymerisations. This "On-POM polymerisation" strategy serves as an innovative platform to design hybrid materials with additive or synergistic properties stemming from the inorganic and polypeptide component parts. We have used this synthetic approach to synthesise a library of bactericidal poly(lysine)-POM hybrid derivatives that can be used to prevent biofilm formation. This versatile "On-POM polymerisation" method provides a flexible synthetic approach for combining inorganic scaffolds with amino acids, and the potential to tailor and improve the specificity and performance of hybrid antimicrobial materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Influence of vessel curvature and plaque composition on drug transport in the arterial wall following drug-eluting stent implantation

  • Escuer, J.
  • Aznar, I.
  • McCormick, C.
  • Peña, E.
  • McGinty, S.
  • Martínez, M.A.
In the last decade, many computational models have been developed to describe the transport of drug eluted from stents and the subsequent uptake into arterial tissue. Each of these models has its own set of limitations: for example, models typically employ simplified stent and arterial geometries, some models assume a homogeneous arterial wall, and others neglect the influence of blood flow and plasma filtration on the drug transport process. In this study, we focus on two common limitations. Specifically, we provide a comprehensive investigation of the influence of arterial curvature and plaque composition on drug transport in the arterial wall following drug-eluting stent implantation. The arterial wall is considered as a three-layered structure including the subendothelial space, the media and the adventitia, with porous membranes separating them (endothelium, internal and external elastic lamina). Blood flow is modelled by the Navier–Stokes equations, while Darcy’s law is used to calculate plasma filtration through the porous layers. Our findings demonstrate that arterial curvature and plaque composition have important influences on the spatiotemporal distribution of drug, with potential implications in terms of effectiveness of the treatment. Since the majority of computational models tend to neglect these features, these models are likely to be under- or over-estimating drug uptake and redistribution in arterial tissue.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Product differentiation in the socially responsible mutual fund industry

  • Alda, M.
  • Muñoz, F.
  • Vargas, M.
In this study, we analyse the effect of product differentiation on prices and clients’ attraction in the socially responsible (SR) mutual fund industry. Using three proxies for differentiation, including a text-based indicator, a return-based indicator, and a portfolio-holding indicator, we analyse a sample of US SR equity mutual funds in the period 1999–2019. Our findings show that the text differentiation measure better explains the product differentiation impact on prices and flows than the measures based on funds’ characteristics. Our text differentiation results indicate that younger SR funds and funds belonging to smaller families are more differentiated. In addition, differentiation allows SR funds to charge higher fees and attract more money flows. Finally, our results indicate that SR fund investors are sensitive to differentiation regarding other funds implementing the same SR strategies, but not in relation to other funds in the same Morningstar financial style category.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Mechanical characterisation of hydrophobic and hydrophilic acrylates used in intraocular lenses through depth sensing indentation

  • Cabeza-Gil, I.
  • Calvo, B.
  • Rico, A.
  • Reinhards-Hervás, C.
  • Rodríguez, J.
In this work, the mechanical behaviour of hydrophilic and hydrophobic acrylates has been characterised by depth sensing indentation. Time-dependent behaviour has been studied using load-relaxation tests. Experiments have been simulated with a finite element software using a visco-hyperelastic material model. The parameters of this model have been determined using deep learning techniques. The developed material models have been used to mechanically simulate a standard compression test of a prototype intraocular lens.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Influence of material and haptic design on the mechanical stability of intraocular lenses by means of finite-element modeling

  • Remón, L.
  • Siedlecki, D.
  • Cabeza-Gil, I.
  • Calvo, B.
Intraocular lenses (IOLs) are used in the cataract treatment for surgical replacement of the opacified crystalline lens. Before being implanted they have to pass the strict quality control to guarantee a good biomechanical stability inside the capsular bag, avoiding the rotation, and to provide a good optical quality. The goal of this study was to investigate the influence of the material and haptic design on the behavior of the IOLs under dynamic compression condition. For this purpose, the strain-stress characteristics of the hydrophobic and hydrophilic materials were estimated experimentally. Next, these data were used as the input for a finite-element model (FEM) to analyze the stability of different IOL haptic designs, according to the procedure described by the ISO standards. Finally, the simulations of the effect of IOL tilt and decentration on the optical performance were performed in an eye model using a ray-tracing software. The results suggest the major importance of the haptic design rather than the material on the postoperative behavior of an IOL. FEM appears to be a powerful tool for numerical studies of the biomechanical properties of IOLs and it allows one to help in the design phase to the manufacturers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Prediction and identification of physical systems by means of physically-guided neural networks with meaningful internal layers

  • Ayensa-Jimenez, J
  • Hamdy Doweidar, M
  • Sanz-Herrera, JA
  • Doblare, M
Substitution of well-grounded theoretical models by data-driven predictions is not as simple in engineering and sciences as it is in social and economic fields. Scientific problems suffer many times from paucity of data, while they may involve a large number of variables and parameters that interact in complex and non-stationary ways, obeying certain physical laws. Moreover, a physically-based model is not only useful for making predictions, but to gain knowledge by the interpretation of its structure, parameters, and mathematical properties. The solution to these shortcomings seems to be the seamless blending of the tremendous predictive power of the data-driven approach with the scientific consistency and interpretability of physically-based models. We use here the concept of Physically-Guided Neural Networks (PGNN) to predict the input-output relation in a physical system, while, at the same time, fulfilling the physical constraints. With this goal, the internal hidden state variables of the system are associated with a set of internal neuron layers, whose values are constrained by known physical relations, as well as any additional knowledge on the system. Furthermore, when having enough data, it is possible to infer knowledge about the internal structure of the system and, if parameterized, to predict the state parameters for a particular input-output relation. We show that this approach, besides getting physically-based predictions, accelerates the training process, reduces the amount of data required to get similar accuracy, partly filters the intrinsic noise in the experimental data and improves its extrapolation capacity. (C) 2021 ElsevierB.V. All rights reserved.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Exosomes loaded with ultrasmall Pt nanoparticles: a novel low-toxicity alternative to cisplatin

  • Sancho Albero, María
  • Martín-Pardillos, Ana
  • Lujan, Lluís
  • Sebastian, Víctor
  • Santamaria, Jesús
  • Martín Duque, Pilar
Background: Platinum nanoparticles have been demonstrated to have excellent anticancer properties. However, because of the lack of specificity they must be delivered to the tumor in amounts sufficient to reach the desired therapeutic objectives. Interestingly, exosomes are considered as excellent natural selective delivery nanotools, but until know their targeting properties have not being combined with the anticancer properties of platinum nanoparticles. Results: In this work we combine the targeting capabilities of exosomes and the antitumoral properties of ultrasmall (< 2 nm) platinum nanoparticles as a novel, low toxicity alternative to the use of cisplatin. A mild methodology based on the room temperature CO-assisted in situ reduction of Pt2+ precursor was employed to preserve the integrity of exosomes, while generating ultrasmall therapeutic PtNPs directly inside the vesicles. The resulting PtNPs-loaded exosomes constitute a novel hybrid bioartificial system that was readily internalized by the target cells inducing antiproliferative response, as shown by flow cytometry and microscopy experiments in vitro. In vivo Pt-Exos showed antitumoral properties similar to that of cisplatin but with a strongly reduced or in some cases no toxic effect, highlighting the advantages of this approach and its potential for translation to the clinic. Conclusions: In this study, a nanoscale vector based on ultrasmall PtNPs and exosomes has been created exhibiting antitumoral properties comparable or higher to those of the FDA approved cisplatin. The preferential uptake of PtNPs mediated by exosomal transfer between certain cell types has been exploited to create a selective antitumoral novel bioartificial system. We have demonstrated their anticancer properties both in vitro and in vivo comparing the results obtained with the administration of equivalent amounts of cisplatin, and showing a spectacular reduction of toxicity. © 2022, The Author(s).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A detailed methodology to model the Non Contact Tonometry: a Fluid Structure Interaction study

  • Redaelli, Elena
  • Grasa, Jorge
  • Calvo, Begoña
  • Rodriguez Matas, Jose Felix
  • Luraghi, Giulia
Understanding the corneal mechanical properties has great importance in the study of corneal pathologies and the prediction of refractive surgery outcomes. Non-Contact Tonometry (NCT) is a non-invasive diagnostic tool intended to characterize the corneal tissue response in vivo by applying a defined air-pulse. The biomarkers inferred from this test can only be considered as indicators of the global biomechanical behaviour rather than the intrinsic biomechanical properties of the corneal tissue. A possibility to isolate the mechanical response of the corneal tissue is the use of an inverse finite element method, which is based on accurate and reliable modelling. Since a detailed methodology is still missing in the literature, this paper aims to construct a high-fidelity finite-element model of an idealized 3D eye for in silico NCT. A fluid-structure interaction (FSI) simulation is developed to virtually apply a defined air-pulse to a 3D idealized eye model comprising cornea, limbus, sclera, lens and humors. Then, a sensitivity analysis is performed to examine the influence of the intraocular pressure (IOP) and the structural material parameters on three biomarkers associated with corneal deformation. The analysis reveals the requirements for the in silico study linked to the correct reproduction of three main aspects: the air pressure over the cornea, the biomechanical properties of the tissues, and the IOP. The adoption of an FSI simulation is crucial to capture the correct air pressure profile over the cornea as a consequence of the air-jet. Regarding the parts of the eye, an anisotropic material should be used for the cornea. An important component is the sclera: the stiffer the sclera, the lower the corneal deformation due to the air-puff. Finally, the fluid-like behavior of the humors should be considered in order to account for the correct variation of the IOP during the test which will, otherwise, remain constant. The development of a strong FSI tool amenable to model coupled structures and fluids provides the basis to find the biomechanical properties of the corneal tissue in vivo.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Is location a significant parameter in the layer dependent dissection properties of the aorta?

  • Ríos-Ruiz, Itziar
  • Martínez, Miguel Ángel
  • Peña, Estefanía
Proper characterisation of biological tissue is key to understanding the effect of the biomechanical environment in the physiology and pathology of the cardiovascular system. Aortic dissection in particular is a prevalent and sometimes fatal disease that still lacks a complete comprehension of its progression. Its development and outcome, however, depend on the location in the vessel. Dissection properties of arteries are frequently studied via delamination tests, such as the T-peel test and the mixed-mode peel test. So far, a study that performs both tests throughout different locations of the aorta, as well as dissecting several interfaces, is missing. This makes it difficult to extract conclusions in terms of vessel heterogeneity, as a standardised experimental procedure cannot be assured for different studies in literature. Therefore, both dissection tests have been here performed on healthy porcine aortas, dissecting three interfaces of the vessels, i.e., the intima-media, the media-adventitia and the media within itself, considering different locations of the aorta, the ascending thoracic aorta (ATA), the descending thoracic aorta and the infrarenal abdominal aorta (IAA). Significant differences were found for both, layers and location. In particular, dissection forces in the ATA were the highest and the separation of the intima-media interface required significantly the lowest force. Moreover, dissection in the longitudinal direction of the vessel generally required more force than in the circumferential one. These results emphasise the need to characterise aortic tissue considering the specific location and dissected layer of the vessel.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Blunted autonomic reactivity to mental stress in depression quantified by nonlinear cardiorespiratory coupling indices

  • Kontaxis, Spyridon
  • Laguna, Pablo
  • García Pages, Esther
  • Posadas-de Miguel, Mar
  • Siddi, Sara
  • Luisa Bernal, Maria
  • Maria Haro, Josep
  • Aguiló, Jordi
  • de la Camara, Concepción
  • Bailón, Raquel
  • Gil, Eduardo
In this study, differences in autonomic reactivity to mental stress between Major Depressive Disorder (MDD) patients and healthy control (HC) subjects are assessed by nonlinear cardiorespiratory coupling indices derived from the Real Wavelet Biphase. The degree and strength of Quadratic Phase Coupling (QPC) between interacting oscillations of Heart Rate Variability (HRV) and respiration are quantified before, during and after the execution of acognitive task. Results show that the QPC strength and QPC degree between the respiration and the respiratory sinus arrhythmia component of HRV were lower in HC compared to MDD during stress, suggesting that the parasympathetic branch was less inhibited in MDD patients. During recovery, only in HC group, this degree of QPC increased, while the respiratory rate was reduced, compared to the basal stage. The degree of QPC between the respiration and components of HRV in the low frequency band ([0.04, 0.15] Hz) increased in HC during stress, compared to the basal stage, while remained unchanged in MDD patients. These results imply that depression is associated with blunted autonomic reactivity to mental stress
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Crystal size dependence of dipolar ferromagnetic order between Mn6 molecular nanomagnets

  • Burzurí, E.
  • Martínez-Pérez, M. J.
  • Muntó, M.
  • Barrios, L. A.
  • Ventosa, N.
  • Roubeau, O.
  • Veciana, J.
  • Aromí, G.
  • Luis, F.
We study how crystal size influences magnetic ordering in arrays of molecular nanomagnets coupled by dipolar interactions. Compressed fluid techniques have been applied to synthesize crystals of Mn6 molecules (spin S = 12) with sizes ranging from 28 µm down to 220 nm. The onset of ferromagnetic order and the spin thermalization rates have been studied by means of ac susceptibility measurements. We find that the ordered phase remains ferromagnetic, as in the bulk, but the critical temperature Tc decreases with crystal size. Simple magnetostatic energy calculations, supported by Monte Carlo simulations, account for the observed drop in Tc in terms of the minimum attainable energy for finite-sized magnetic domains limited by the crystal boundaries. Frequency-dependent susceptibility measurements give access to the spin dynamics. Although magnetic relaxation remains dominated by individual spin flips, the onset of magnetic order leads to very long spin thermalization time scales. The results show that size influences the magnetism of dipolar systems with as many as 1011 spins and are relevant for the interpretation of quantum simulations performed on finite lattices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Synergistic assembly of gold and copper-iron oxide nanocatalysts to promote the simultaneous depletion of glucose and glutathione

  • Bonet-Aleta, J.
  • Hueso, J.L.
  • Sánchez-Uriel, L.
  • Encinas-Giménez, M.
  • Irusta, S.
  • Martín-Duque, P.
  • Martínez, G.
  • Santamaría, J.
Glucose and glutathione (GSH) are key biomolecules for the regulation and growth of tumor cells. The use of inorganic nanocatalysts in biomedicine to target and deplete such specific molecules represents a novel and promising strategy against cancer. In this work, we present a ternary assembled nanohybrid based on Au and CuFe2O4 with the capability to simultaneously deplete glucose and GSH and generate reactive oxidative species (ROS) in a cascade process. We describe an example of a synergistic heterogeneous nanoarchitecture able to maintain the glucose oxidase-like activity of Au while preventing its deactivation in the presence of GSH. Au sites remain active due to the rapid response of the Cu–Fe co-catalyst to deplete GSH levels. This example of hybrid heterostructure represents an appealing alternative with dual-activity within the tumor microenvironment (TME) for potential anticancer therapy.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Superfluorinated extracellular vesicles for in vivo imaging by 19f-mri

  • Sancho-Albero, María
  • Ayaz, Nazeeha
  • Sebastian, Victor
  • Chirizzi, Cristina
  • Encinas-Gimenez, Miguel
  • Neri, Giulia
  • Chaabane, Linda
  • Luján, Lluís
  • Martin-Duque, Pilar
  • Metrangolo, Pierangelo
  • Santamaría, Jesús
  • Baldelli Bombelli, Francesca
Extracellular vesicles (EVs) play a crucial role in cell-to-cell communication and have great potential as efficient delivery vectors. However, a better understanding of EV in vivo behavior is hampered by the limitations of current imaging tools. In addition, chemical labels present the risk of altering the EV membrane features and, thus, in vivo behavior. 19F-MRI is a safe bioimaging technique providing selective images of exogenous probes. Here, we present the first example of fluorinated EVs containing PERFECTA, a branched molecule with 36 magnetically equivalent 19F atoms. A PERFECTA emulsion is given to the cells, and PERFECTA-containing EVs are naturally produced. PERFECTA-EVs maintain the physicochemical features, morphology, and biological fingerprint as native EVs but exhibit an intense 19F-NMR signal and excellent 19F relaxation times. In vivo 19F-MRI and tumor-targeting capabilities of stem cell-derived PERFECTA-EVs are also proved. We propose PERFECTA-EVs as promising biohybrids for imaging biodistribution and delivery of EVs throughout the body.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

CO2 separation using thin film composite membranes of acid-hydrolyzed PIM-1

  • Yu, M.
  • Foster, A. B.
  • Alshurafa, M.
  • Luque-Alled, J. M.
  • Gorgojo, P.
  • Kentish, S. E.
  • Scholes, C. A.
  • Budd, P. M.
The polymer of intrinsic microporosity PIM-1 was synthesized with different topologies and negligible network content. A more rapid heating rate from room temperature yielded a predominantly di-substituted PIM-1 (D-PIM-1), whereas a marginally lower heating rate produced a more branched structure (B-PIM-1). Both polymers were acid-hydrolyzed to give carboxylic acid functionalization (cPIM-1), as indicated by FT-IR, 1H NMR, and elemental analysis. Both PIM-1 and cPIM-1 were processed into self-supported membranes and into thin film composite (TFC) membranes on a polyacrylonitrile support. For a 70% hydrolyzed polymer (D-cPIM-1-70%), the initial CO2 permeance reached 7700 GPU, with ideal selectivity of 56 for CO2/N2 and 37 for CO2/CH4. D-PIM-1 and D-cPIM-1-70% showed 85% and 52% CO2 permeance drop after 60 days’ aging, respectively. B-PIM-1, with initial CO2 permeance of 3100 GPU and ideal selectivity of 19 for CO2/N2 and 11 for CO2/CH4, showed only a 65% decrease. Polymer that was both branched and hydrolyzed (B-cPIM-1-73&81%), with CO2 permeance of 3200 GPU and selectivity of 64 for CO2/N2 and 45 for CO2/CH4, showed no decrease of CO2 permeance after 60 days. The branched structure is crucial for reducing membrane aging. Plasticization gave rise to reduced selectivity in mixed gas experiments, but nevertheless TFC membranes prepared from B-cPIM-1-81% were able to concentrate CO2 to 38% from a 10% CO2/90% N2 mixture at 4.8 bar.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Evaluating the durability and performance of polyoxometalate-ionic liquid coatings on calcareous stones: Preventing biocolonisation in outdoor environments

  • Eyssautier-Chuine, S.
  • Franco-Castillo, I.
  • Misra, A.
  • Hubert, J.
  • Vaillant-Gaveau, N.
  • Streb, C.
  • Mitchell, S. G.
Rock-based materials exposed to outdoor environments are naturally colonised by an array of microorganisms, which can cause dissolution and fracturing of the natural stone. Biocolonisation of monuments and architectures of important cultural heritage therefore represents an expensive and recurring problem for local authorities and private owners alike. In this area, preventive strategies to mitigate biocolonisation are generally preferred to curative approaches, such as mechanical cleaning by brush or high-pressure cleaning, to remove pre-existing patina. The aim of this work was to study the interaction between biocidal polyoxometalate-ionic liquid (POM-IL) coatings and calcareous stones and evaluate the capacity of these coatings to prevent biocolonisation through a series of accelerated ageing studies in climate chambers, carried out in parallel with a two-year period of outdoor exposure in north-eastern France. Our experiments show that POM-IL coatings did not affect water vapour transfer nor significantly alter the total porosity of the calcareous stones. Simulated weathering studies replicating harsh (hot and wet) climatic weather conditions demonstrated that the colour variation of POM-IL-coated stones did not vary significantly with respect to the natural uncoated stones. Accelerated biocolonisation studies performed on the weathered POM-IL-coated stones proved that the coatings were still capable of preventing colonisation by an algal biofilm. However, a combination of colour measurements, chlorophyll fluorescence data, and scanning electron microscopy imaging of stones aged outdoors in northern France for two years showed that coated and uncoated stone samples showed signs of colonisation by fungal mycelium and phototrophs. Altogether, our results demonstrate that POM-ILs are suitable as preventative biocidal coatings for calcareous stones, but the correct concentrations must be chosen to achieve a balance between porosity of the stone, the resulting colour variation and the desired duration of the biocidal effect over longer periods of time, particularly in outdoor environments.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

The Role of Mechanical Properties and Structure of Type I Collagen Hydrogels on Colorectal Cancer Cell Migration

  • Castro-Abril, Hector
  • Heras, Jónathan
  • del Barrio, Jesús
  • Paz, Laura
  • Alcaine, Clara
  • Pérez Aliácar, Marina
  • Garzón-Alvarado, Diego
  • Doblaré, Manuel
  • Ochoa, Ignacio
Mechanical interactions between cells and their microenvironment play an important role in determining cell fate, which is particularly relevant in metastasis, a process where cells invade tissue matrices with different mechanical properties. In vitro, type I collagen hydrogels have been commonly used for modeling the microenvironment due to its ubiquity in the human body. In this work, the combined influence of the stiffness of these hydrogels and their ultrastructure on the migration patterns of HCT-116 and HT-29 spheroids are analyzed. For this, six different types of pure type I collagen hydrogels by changing the collagen concentration and the gelation temperature are prepared. The stiffness of each sample is measured and its ultrastructure is characterized. Cell migration studies are then performed by seeding the spheroids in three different spatial conditions. It is shown that changes in the aforementioned parameters lead to differences in the mechanical stiffness of the matrices as well as the ultrastructure. These differences, in turn, lead to distinct cell migration patterns of HCT-116 and HT-29 spheroids in either of the spatial conditions tested. Based on these results, it is concluded that the stiffness and the ultrastructural organization of the matrix can actively modulate cell migration behavior in colorectal cancer spheroids. Las interacciones mecánicas entre las células y su microambiente juegan un papel importante en la determinación del destino celular, lo cual es particularmente relevante en la metástasis, un proceso en el que las células invaden matrices tisulares con diferentes propiedades mecánicas. In vitro, los hidrogeles de colágeno tipo I se han utilizado comúnmente para modelar el microambiente debido a su ubicuidad en el cuerpo humano. En este trabajo se analiza la influencia combinada de la rigidez de estos hidrogeles y su ultraestructura en los patrones de migración de los esferoides HCT-116 y HT-29. Para ello se preparan seis tipos diferentes de hidrogeles de colágeno puro tipo I cambiando la concentración de colágeno y la temperatura de gelificación. Se mide la rigidez de cada muestra y se caracteriza su ultraestructura. Luego se realizan estudios de migración celular sembrando los esferoides en tres condiciones espaciales diferentes. Se muestra que los cambios en los parámetros antes mencionados conducen a diferencias en la rigidez mecánica de las matrices así como en la ultraestructura. Estas diferencias, a su vez, conducen a distintos patrones de migración celular de los esferoides HCT-116 y HT-29 en cualquiera de las condiciones espaciales probadas. Con base en estos resultados, se concluye que la rigidez y la organización ultraestructural de la matriz pueden modular activamente el comportamiento de migración celular en esferoides de cáncer colorrectal.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Performance in Kahoot! activities as predictive of exam performance

  • Garza, MC
  • Olivan, S
  • Monleón, E
  • Cisneros, Ana Isabel
  • García-Barrios, A
  • Ochoa, I
  • Whyte, J
  • Lamiquiz-Moneo, I
Background: Game-based learning (GBL) is effective for increasing participation, creativity, and student motivation. However, the discriminative value of GBL for knowledge acquisition has not yet been proven. The aim of this study is to assess the value of Kahoot! as a discriminative tool for formative assessment in medical education in two different subjects. Methods:A prospective experimental study was conducted on a sample of 173 students enrolled in neuroanatomy (2021–2022). One hundred twenty-five students individually completed the Kahoot! prior to the final exam. In addition, students enrolled in human histology during two academic courses were included in the study. The control group course (2018–2019) received a traditional teaching methodology (N = 211), while Kahoot! was implemented during 2020–2021 (N = 200). All students completed similar final exams for neuroanatomy and human histology based on theory tests and image exams. Results:The correlation between the Kahoot score and the final grade was analyzed for all students enrolled in neuroanatomy who completed both exercises. The correlation between the Kahoot exercise and the theory test, image exam and final grade was significantly positive in all cases (r = 0.334 p < 0.001, r = 0.278 p = 0.002 and r = 0.355 p < 0.001, respectively). Moreover, students who completed the Kahoot! exercise obtained significantly higher grades in all parts of the exam. Regarding human histology, the theory tests, image exams and final grades were significantly higher when using Kahoot! versus the “traditional” methodology (p < 0.001, p < 0.001 and p = 0.014, respectively).Conclusions: Our study demonstrates for the first time that Kahoot! can be used to improve and predict the final grade in medical education subjects.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Gas-solid contactors and catalytic reactors with direct microwave heating: current status and perspectives

  • Hueso, José L.
  • Mallada, Reyes
  • Santamaría, Jesús
Microwave heating (MWH) transforms energy from an electromagnetic wave to heat. In contrast to conventional heating (CH) mechanisms that use slower heat transfer processes via conduction, convection or radiation, microwaves (MW) directly interact with MW susceptor materials and induce a rapid conversion of the electromagnetic energy into heat. This rapid heating provides MWH with distinct features that can be leveraged to increase conversion, selectivity and/or energy efficiency of chemical processes. Here we discuss recent significant advances reported in MWH processes involving gas-solid interactions. Special attention is devoted to key aspects such as the methodologies to accurately determine local temperatures under the influence of electromagnetic (EM). Other relevant aspects such as the consideration of the solid catalyst dielectric properties or the design of novel gas-solid contactor configurations will be discussed. Emerging aspects such as the potential of MWH to minimize secondary by-products in high temperature reactions or to efficiently perform in transient processes, e.g. adsorption-desorption cycles, are highlighted. Finally, current challenges and perspectives towards a wide application of MWH in gas solid contactors will be critically discussed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Dry powder formulation for pulmonary infections: Ciprofloxacin loaded in chitosan sub-micron particles generated by electrospray

  • Arauzo, Beatriz
  • Lobera, M. Pilar
  • Monzon, Antonio
  • Santamaria, Jesús
Electrospray was used as a one-step technique to generate inhalable ciprofloxacin-loaded chitosan sub-micron particles with potential use in the treatment of pulmonary infections. The effect of operating parameters was studied and the preparation method optimized. The final sizes of ciprofloxacin-loaded particles were 386.1 +/- 248.5 nm and 501.1 +/- 276.3 nm for high and low molecular weight chitosan, respectively. The high surface charge of the particles formed, around +45 mV, enhances their mucoadhesive properties. The particles were biocompatible with alveolar cell line (A549), and showed a high antimicrobial activity against two of the most common respiratory pathogens Staphylococcus aureus and Pseudomonas aeruginosa.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Improving early detection of keratoconus by Non Contact Tonometry. A computational study and new biomarkers proposal

  • Redaelli, Elena
  • Nana, Michael
  • Calvo, Begoña
  • Rodríguez Matas, José Félix
  • Luraghi, Giulia
  • Rozema, Jos
  • Grasa, Jorge
Keratoconus is a progressive ocular disorder affecting the corneal tissue, leading to irregular astigmatism and decreased visual acuity. The architectural organization of corneal tissue is altered in keratoconus, however, data from ex vivo testing of biomechanical properties of keratoconic corneas are limited and it is unclear how their results relate to true mechanical properties in vivo. This study explores the mechanical properties of keratoconic corneas through numerical simulations of non-contact tonometry (NCT) reproducing the clinical test of the Corvis ST device. Three sensitivity analyses were conducted to assess the impact of corneal material properties, size, and location of the pathological area on NCT results. Additionally, novel asymmetry-based indices were proposed to better characterize corneal deformations and improve the diagnosis of keratoconus. Our results show that the weakening of corneal material properties leads to increased deformation amplitude and altered biomechanical response. Furthermore, asymmetry indices offer valuable information for locating the pathological tissue. These findings suggest that adjusting the Corvis ST operation, such as a camera rotation, could enhance keratoconus detection and provide insights into the relative position of the affected area. Future research could explore the application of these indices in detecting early-stage keratoconus and assessing the fellow eye's risk for developing the pathology
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Exploring the muscle architecture effect on the mechanical behaviour of mouse rotator cuff muscles

  • Heras-Sádaba, A.
  • Pérez-Ruiz, A.
  • Martins, P.
  • Ederra, C.
  • Ortiz de Solórzano, C.
  • Abizanda, G.
  • Pons-Villanueva, J.
  • Calvo, B.
  • Grasa, J.
Incorporating detailed muscle architecture aspects into computational models can enable researchers to gain deeper insights into the complexity of muscle function, movement, and performance. In this study, we employed histological, multiphoton image processing, and finite element method techniques to characterise the mechanical dependency on the architectural behaviour of supraspinatus and infraspinatus mouse muscles. While mechanical tests revealed a stiffer passive behaviour in the supraspinatus muscle, the collagen content was found to be two times higher in the infraspinatus. This effect was unveiled by analysing the alignment of fibres during muscle stretch with the 3D models and the parameters obtained in the fitting. Therefore, a strong dependence of muscle behaviour, both active and passive, was found on fibre orientation rather than collagen content.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Nanomedicine targeting cuproplasia in cancer: labile copper sequestration using polydopamine particles blocks tumor growth in vivo through altering metabolism and redox homeostasis

  • Bonet-Aleta, Javier
  • Encinas-Giménez, Miguel
  • Oi, Miku
  • Pezacki, Aidan T.
  • Sebastián, Víctor
  • de Martino, Alba
  • Martín-Pardillos, Ana
  • Martín-Duque, Pilar
  • Hueso, José L.
  • Chang, Christopher J.
  • Santamaría, Jesús
Copper plays critical roles as a metal active site cofactor and metallo-allosteric signal for enzymes involved in cell proliferation and metabolism, making it an attractive target for cancer therapy. In this study, we investigated the efficacy of polydopamine nanoparticles (PDA NPs), classically applied for metal removal from water, as a therapeutic strategy for depleting intracellular labile copper pools in triple negative breast cancer models through the metal-chelating groups present on PDA surface. By using the activity-based sensing probe FCP-1, we could track the PDA-induced labile copper depletion while leaving total copper levels unchanged, and link it to the selective MDA-MB-231 cell death. Further mechanistic investigations revealed that PDA NPs increased reactive oxygen species (ROS) levels, potentially through the inactivation of superoxide dismutase 1 (SOD1), a copper-dependent antioxidant enzyme. Additionally, PDA NPs were found to interact with the mitochondrial membrane, resulting in an increase in mitochondrial membrane potential, which may contribute to enhanced ROS production. We employed an in vivo tumor model to validate the therapeutic efficacy of PDA NPs. Remarkably, in the absence of any additional treatment, the presence of PDA NPs alone led to a significant reduction in tumor volume by a factor of 1.66 after 22 days of tumor growth. Our findings highlight the potential of PDA NPs as a promising therapeutic approach for selectively targeting cancer by modulating copper levels and inducing oxidative stress, leading to tumor growth inhibition as shown in these triple negative breast cancer models.