Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 150
Encontrada(s) 2 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Microalgae Chorella sp. in biofloc Penaeus vannamei culture [Dataset], Biofloc characterization after achieving a stable population of Chorella sp. for Penaeus vannamei culture (Bonne, 1931).

  • Cascales Martos, Tatiana
Biofloc systems improve water quality and add nutritional value to aquaculture production through complex microbial and planktonic communities, in which the inclusion of microalgae can enhance nutrient recycling and overall system functionality. This study evaluated the inoculation of microalgae in biofloc systems for Penaeus vannamei under different photoperiod regimes. In the first experiment, Chlorella sp. under 16:8 and, particularly, 12:12 photoperiods established stable populations, increased biofloc biodiversity, and improved the mineral profile of the system. In the second experiment, Chlorella sp. persisted for up to 32 days following a single inoculation, reduced nitrate accumulation, and enriched the biofloc with polyunsaturated fatty acids associated with immune function. Although no consistent effect on animal growth was observed, the results highlight the interaction between water quality, biofloc composition, and zootechnical performance. Overall, Chlorella sp. under a 12:12 photoperiod enhanced the ecological and nutritional quality of the biofloc, although further studies are required to optimize inoculation protocols and maximize productive benefits. Shrimp_growth include data on the animals’ growth performance. Water_quality corresponds to the monitoring of biofloc water quality in which the animals were reared. Chlorophyll _concentration include date to chlorophyll content estimate was used to estimate the quantification of the autotrophic population. Plankton_community refers to describe the evolution of biofloc planktonic composition. Nutritional_biofloc refers to dry matter, ash, crude lipid, crude protein anda fatty acid content analyses performed biofloc samples. Mineral_content refers to decribe major and trace mineral element dynamics of biofloc.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Cell prototype based on textile electrodes for dyestuff wastewater electrolysis [Dataset], Development and application of an electrolysis cell prototype based on textile electrodes: dyestuff wastewater electrolysis

  • Cases, Francisco|||0000-0001-8105-4489
  • Soler Micó, Ignacio
  • Orts Maiques, Francisco José|||0000-0001-8254-8042
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Micó-Vicent, B.|||0000-0001-8845-1495
[EN] This research work studies the development of an electrochemical cell prototype based on textile electrodes for treating wastewater via electrochemical processes. The present prototype proposes a system that offers greater efficiency regarding the size/surface of electrodes in electrolysis processes. This prototype enables the treatment of large volumes of dissolution. Moreover, this prototype could surface modify textile electrodes by an electrochemical process in the same cell, specifically, an electrochemically reduced graphene oxide intermediate layer and an outer layer of electrochemically reduced metal nanoparticles are proposed. Surface modification by reduced graphene oxide increase the textile electrode’s stability, conductivity, and specific surface, whilst Pt nanoparticles increase electroactivity. Amaranth was selected to validate the use of this prototype in treating emerging pollutants. This is an azoic dye with a simple structure. Various analytical techniques demonstrate that colour removal takes place with an electrical energy consumption of between 0.29 and 4.66 kWh m−3 (depending on the operational specifications of the electrolysis performed). Once the colour is removed, total organic carbon and chemical oxygen demand decreases by up to 49% and 37%, respectively., This research is part of the Spanish R+D+i contract (TED2021-130905B-I00 funded by MCIN/ AEI/10.13039/501100011033 and the “European Union NextGenerationEU/PRTR”). The authors wish to acknowledge the Spanish AEI Research Network (Contract RED2022-134552-T). Chemviron Carbon, who kindly donated the FlexzorbTM FM10 activated carbon fabrics and Funding for open access charge CRUE-Universitat Politècnica de València, are acknowledged too. The authors are grateful for the English revision by John Rawlins and Tim Vickers.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Early Physiological and Gut Microbiota Responses to Dietary Fishmeal Reduction in Mugil cephalus Under Biofloc Technology [Dataset]

  • Brol, Jéssica
  • Tomas-Vidal, A.|||0000-0002-2985-9324
  • Olivares-Perona, Ruben|||0009-0000-8374-5056
  • Rodilla, M|||0000-0001-6767-5676
  • Falco, S.|||0000-0002-8679-9153
  • Jover Cerda, Miguel|||0000-0001-9049-0573
  • Carbó, Ricard
  • Gisbert, Enric
  • Martínez-Llorens, Silvia|||0000-0002-9824-3267
  • Peñaranda, D.S.|||0000-0002-0861-976X
The early intestinal response of Mugil cephalus to fishmeal replacement with alternative protein sources under biofloc technology (BFT) was assessed. Juvenile mullet (82.68 ± 0.05 g) were distributed among three dietary treatments with decreasing fishmeal inclusion levels of 15%, 5%, and 0%, corresponding to FM15, FM5, and FM0, respectively. After 27 days of feeding, intestinal samples were analyzed for microbiota composition, transcriptomic responses and enzymatic activity. The FM0 group exhibited reduced intestinal enzyme activity, whereas no significant differences were observed in terms of gut microbiota among the diets. Furthermore, transcriptomic analysis revealed differentially expressed genes associated with enriched GO terms and KEGG pathways related to lipid metabolism. This response was consistent with the lower mesenteric fat indices and whole-body lipid content observed in fish fed the FM0 diet, suggesting an early metabolic adjustment associated with complete fishmeal replacement and the higher dietary protein content. All diets exhibited high protein efficiency ratios (9.98 ± 2.42) and low feed conversion ratios (0.40 ± 0.17), with no significant differences observed among them. However, complete fishmeal replacement negatively affected intestinal physiology and lipid storage, indicating that these alterations were not fully compensated for by the biofloc system and may not be physiologically sustainable over longer periods. Further studies over an extended period could be carried out to evaluate the long-term effects of these diets., This work was supported by Grant TED2021-129272B-C21, funded by MICIU/AEI/10.13039/501100011033, and by the European Union NextGenerationEU/PRTR and the Generalitat Valenciana (GVA AICO/2021/198). J. Brol has a predoctoral grant from Generalitat Valenciana (Programa Santiago Grisolía 2021; CIGRIS/2021/109). R. Olivares-Perona has a technician contract that was funded by TED2021-129272B-C21. Funding for open access charge: Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Electrooxidation of polystyrene nanoplastics by modified Ti-felt electrodes, High surface area modified Ti-felt electrodes for the degradation of polystyrene nanoplastics

  • Cases, Francisco|||0000-0001-8105-4489
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Rodrigo Roca, Rubén
[EN] Ti-felt electrodes with high surface area have been used as supports of electroactive coatings (Pt and SnO₂–Sb–Pt). The electrodes obtained have been employed for the electrochemical oxidation of polystyrene nanoplastics (NPs) (100 nm) in solution. Voltammetric characterization of the electrodes with Ru(NH₃)₆Cl₃ and K₃Fe(CN)₆ redox mediators showed a substantial increase in the redox peaks' current density compared to the boron‑doped diamond electrode. For example, this increase was >68‑fold for the SnO₂–Sb–Pt electrode when using the Ru(NH₃)₆Cl₃ redox mediator. This can be attributed to the enhanced surface area of Ti‑felt, composed of 20 μm diameter fibers, and the roughness of the electrocatalyst coatings. Voltammetric characterization of Ti‑Pt and Ti‑SnO₂–Sb–Pt in 0.03 M Na₂SO₄ media showed an increase in the anodic current density when adding NPs, which would account for a direct mechanism of electrooxidation of the electrode. •OH, S₂O₈²⁻, H₂O₂, and O₃ generation were also determined for both types of electrodes. The degradation of NPs was monitored by fluorescence spectroscopy, taking advantage of the fluorescence of styrene. In addition, it was observed that the dispersion of the second‑order diffraction light (this phenomenon takes place in the diffraction grating of the monochromator) by NPs could also be used to monitor the evolution of the NPs concentration in solution. The electrochemical degradation of polystyrene NPs was faster with SnO₂–Sb–Pt modified Ti‑felt‑based electrodes than with the Pt‑modified one (reaching 90 % degradation in 100 and 210 minutes at 25 mA·cm⁻², respectively). Electrochemical energy consumption per order was also lower for SnO₂–Sb–Pt‑modified electrodes., This research is part of the Spanish R+D+i contract TED2021-130905B-I00 funded by MCIN/AEI /10.13039/501100011033 and by the European Union NextGenerationEU/PRTR as well as the Red E3Tech Plus: Proyecto Redes de Investigación de la AEI Network E3Tech PLUS (RED2022-134552-T) project. Funding for open access charge: CRUE-Universitat Politècnica de València. The Electron Microscopy Service of the UPV (Universitat Politècnica de València) is gratefully acknowledged for its help with FESEM, EDX, and TEM characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Electrooxidation of polystyrene nanoplastics by BDD electrodes [Dataset], Influence of the doping level of boron-doped diamond electrodes in the electrooxidation of polystyrene nanoplastics

  • Cases, Francisco|||0000-0001-8105-4489
  • Rodrigo Roca, Rubén
  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Muñoz Ortuño, Lucía
[EN] Microplastics and nanoplastics have arisen as contaminants of emerging concern due to the wide use of plastics, and the application of boron-doped diamond (BDD) electrodes for their removal is promising. In this study, we report the influence of BDD doping levels (500, 2500, and 10000 ppm B doping) on the electrooxidation of polystyrene nanoplastics (100 nm, 20 mg⋅L-1). Different current densities (50, 25, 12.5, and 5 mA⋅cm-2) have been applied to determine the best electrolysis conditions for each electrode type. In addition, hydroxyl radical (•OH), persulphate (S2O82-), and hydrogen peroxide (H2O2) reactive species have been determined to understand the influence of the species generated on the degradation of NPs. BDD500 electrode presents the fastest degradation of PS NPs at low current densities (12.5 and 5 mA⋅cm-2), BDD2500 at 25 mA⋅cm-2, and BDD10000 at 50 mA⋅cm-2. Among oxidative species determined, S2O82- is the one generated with the highest concentration and seems to command the degradation of PS NPs, since at 25, 12.5, and 5 mA⋅cm-2, the electrodes that produce more S2O82- degrade faster PS NPs. At 50 mA⋅cm-2, the differences between the different electrodes were minimal. The highest mineralization (as measured by non-purgeable organic carbon measurements) was obtained for BDD500 at 50, 25, and 12.5 mA⋅cm-2, and BDD2500 at 5 mA⋅cm-2., This research is part of the Spanish R +D +i contract TED2021-130905B-I00 funded by MCIN/AEI /10.13039/501100011033 and by the European Union NextGenerationEU/PRTR as well as the Red E3Tech Plus: Proyecto Redes de Investigación de la AEI Network E3Tech PLUS (RED2022-134552-T) project. Funding for open access charge: CRUE- Universitat Politècnica de València. The Electron Microscopy Service of the UPV (Universitat Politècnica de València) is gratefully acknowledged for help with TEM and FESEM characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Effects of Chlorella sp. and bacterial probiotics in biofloc systems for white shrimp [Dataset], Combined and Individual Effects of Chlorella sp. and Bacterial Probiotics in Biofloc Systems for White Shrimp (Penaeus vannamei)

  • Cascales Martos, Tatiana
Biofloc technology is an increasingly used strategy for more sustainable shrimp farming. However, new approaches are still needed to improve water quality and animal health. In this study, we evaluated the effects of the green microalga Chlorella sp. and a commercial probiotic, applied separately or in combination, in a biofloc system for Pacific white shrimp culture. A single inoculation of Chlorella sp. maintained a stable population for approximately 40 days. The microalga contributed to nutrient bioremediation in water and increased the nutritional value of the biofloc, a natural food source for shrimp. However, shrimp reared in microalgae treatments showed lower growth performance and survival, which may have been associated with prolonged exposure to the elevated nitrate levels associated with microalgae inoculation. In contrast, the probiotic and control treatments showed comparable zootechnical performance, and both outperformed the microalgae treatments. Probiotic supplementation also reduced the abundance of Flavobacteriaceae, a bacterial family proposed as a bioindicator of White Feces Syndrome (WFS). Overall, these findings suggest that microalgae have considerable potential to improve the sustainability of biofloc systems, provided that the inoculation protocol should be optimized, and confirm the probiotic as an effective strategy to enhance shrimp productivity and health., The authors would like to thank the technical staff of the Aquaculture Laboratory of the Universitat Politècnica de València for their assistance during the experimental work. We would also like to sincerely thank João Rito for his invaluable help and support throughout the entire experimental process.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Electrochemical removal of polystyrene nanoplastics in a filter-press reactor using modified Ti-felt anodes [Dataset]

  • Cases, Francisco|||0000-0001-8105-4489
  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Rodrigo Roca, Rubén
Ti-felt anodes, with high surface area, have been used as supports of Pt and SnO2-Sb-Pt electrocatalysts. Anodes have been applied in a filter-press electrochemical reactor for the electrooxidation of polystyrene nanoplastics (NPs) (100 mg·L-1). Two types of configurations have been used. In the first, the solution with NPs flows through the anode, taking advantage of its porosity (acting as a sort of membrane) to enhance the contact of NPs with the anode and the oxidative species generated. In the second configuration, the solution of NPs flows parallel to the anode, and the NPs flow parallel to it. Comparing both configurations at 25 mA·cm-2, for the Ti-Pt anode, the flow-through configuration decreases energy consumption by ~7-fold and treatment time by ~15-fold when compared to the flow-by configuration. For Ti-SnO2-Sb-Pt anode, ratios of ~6.5-fold and ~13-fold were obtained, respectively. Moreover, the effect of the current density (50, 25, 12.5, and 5 mA·cm-2) was studied. For the Ti-Pt electrode, a treatment time of only 40 minutes was achieved at a current density of 25 mA·cm-2 with the F-T configuration, with a faradaic efficiency of 62.09 %, and electrochemical energy per order (EEO) of 21.91 kW·h·m-3·order-1. In the case of the F-B configuration at 25 mA·cm-2 the treatment time increases until 600 min, with a faradaic efficiency of 8.27 % and EEO of 156.57 kW·h·m- 3·order-1., This research is part of the Spanish R+D+i contract TED2021-130905B-I00 funded by MCIN/AEI /10.13039/501100011033 and by the European Union NextGenerationEU/PRTR as well as the Red E3Tech Plus: Proyecto Redes de Investigación de la AEI Network E3Tech PLUS (RED2022-134552-T) project. Funding for open access charge: CRUE-Universitat Politècnica de València. The Electron Microscopy Service of the UPV (Universitat Politècnica de València) is gratefully acknowledged for its help with FESEM, EDX, TEM, and XRM characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Liza aurata for sustainable aquaculture: Effects of dietary fishmeal levels on growth and quality traits [Dataset]

  • Olivares Perona, Ruben
  • Tomas-Vidal, A.|||0000-0002-2985-9324
  • Brol, Jessica
  • Jauralde García, Ignacio|||0000-0002-8867-2834
  • Jover Cerda, Miguel|||0000-0001-9049-0573
  • Peñaranda, D.S.|||0000-0002-0861-976X
  • Martínez-Llorens, Silvia|||0000-0002-9824-3267
[EN]Considering the increasing demand for sustainable aquafeeds, the present study aimed to evaluate the potential of dietary fishmeal inclusion in diets for Liza aurata with alternative protein sources of animal, plant, and unicellular origin. Four experimental diets were formulated with varying levels of fishmeal inclusion (FM15, FM10, FM5, and FM0, representing 15%, 10%, 5%, and 0% fishmeal, respectively) to assess their effects on growth performance, body composition, and economic viability in juvenile Liza aurata (9.14 ± 1.52 g). After three months, there were no significant differences in the survival rates or growth parameters among diets. Nonetheless, fish fed diet without fishmeal showed the lowest condition factor and mesenteric fat. The results on body composition indicated similarities among treatments in terms of amino acid and fatty acid profiles. Fish fed the diet without fishmeal obtained the lowest values of the Fish in–Fish out ratio for fishmeal (FIFO FM), the Marine protein dependency ratio (MPDR), and the Marine oil dependency ratio (MODR). Finally, polynomial regressions demonstrated a negative trend in some indices as fishmeal content was reduced. In conclusion, the findings suggest that while Liza aurata can be reared on low level of dietary fishmeal, but a minimum inclusion level of 9% fishmeal is needed to maintain optimal growth, filet quality, and the economic profitability., Funding for open access charge: Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Electrochemical degradation of Naproxen by carbon paper electrodes coated by RGO and Pt, Naproxen electrooxidation using carbon paper electrodes modified with reduced graphene oxide and platinum nanoparticles

  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Cases, Francisco|||0000-0001-8105-4489
  • Olcina Doménech, Laura
This research study investigates the electrooxidation of naproxen (NPX), an anti-inflammatory pharmaceutical, on modified carbon paper (CP) electrodes. Electrochemical modification of CP electrodes was accomplished with Pt or reduced graphene oxide (RGO)-Pt coatings, resulting in the production of electroactive electrodes. RGO coatings synthesized by cyclic voltammetry (CV) for 10 scans provided the optimal coverage for the CP electrode surface. The deposition of Pt nanoparticles (Pt NPs) on the electrodes (CP or CP-RGO) by CV produced a good electrode surface coverage with 20 synthesis scans. The voltammetric analysis of the electrodes in 230 mg/L NPX solution showed oxidation peaks around 1.0 to 1.2 V. Moreover, the inclusion of RGO in the coating led to an increase in the current density of these oxidation peaks and a decrease of the electrode electron transfer resistance as measured by electrochemical impedance spectroscopy. The electrolysis of NPX in different electrolytes (Na2SO4 and Na2SO4/NaCl) was conducted at 1.4 V, and the removal of NPX was analyzed using high-performance liquid chromatography. The CP-RGO-Pt electrode in Na2SO4/NaCl media showed the fastest NPX degradation kinetics, resulting in a 90 % degradation in only 90 min with low charge consumption (0.07 A⋅h⋅L-1). The smaller size of Pt NPs deposited on CP-RGO, as observed by field emission scanning electron microscopy and transmission electron microscopy, contributed to the higher electrochemical response in CV and a faster kinetic degradation of NPX., This research is part of the Spanish R + D + i contract TED2021-130905B-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR as well as the Red E3Tech Plus: Proyecto Redes de Investigaci´on de la AEI Network E3Tech PLUS (RED2022-134552-T) project. Funding for open access charge: CRUE Universitat Polit`ecnica de Val`encia. The Electron Microscopy Service of the UPV (Universitat Polit`ecnica de Val`encia) is gratefully acknowledged for help with FESEM and EDX characterization.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Tectonic map of the Iberian continental margins and abyssal plains: Tectonic features and Main Map references

  • Druet Vélez, María
  • Bohoyo, Fernando
  • Maestro González, Adolfo
  • Mink Proeck, Sandra Martina
  • García Senz, Jesús María
  • Pedrera Parias, Antonio
  • Rodríguez Fernández, Luis Roberto
[Description of methods used for collection/generation of data] This map has been elaborated based on a compilation of different tectonic features described by other authors in scientific publications, books and PhD theses developed in different sectors of the continental margins of Iberia. The tectonic feature mapping derived from this compilation has been implemented in a Geographic Information System (GIS). In some cases, the structures shown have been redrawn or directly interpreted from the available geophysical information (bathymetry, seismic profiles, and potential fields)., The tectonic features included in this dataset were compiled for a tectonic map at scale 1:1,750,000. This work shows an update of the existing knowledge of the main tectonic and volcanic structures along the Iberian continental margins and abyssal plains. The morphotectonic trends around Iberia recorded superposed geodynamic processes linked to the opening of the North Atlantic Ocean since the Mesozoic and the evolution of the Mediterranean Sea during the Cenozoic, as well as the reactivation of Hercynian faults and the formation of new tectonic structures during the Alpine orogeny. The delineation of the different tectonic features included in the dataset is based on the interpretation of the digital bathymetric model and other geophysical data from our own studies, and those from other authors. Accompanying the dataset, a PDF document with the bibliographical references used is also included., This work was supported by the C.N. Instituto Geológico y Minero de España-CSIC via SEGYBAS and 3D Vasco Cantábrica own projects, and the Spanish Ministry of Science and Innovation projects SEASTORAGE (TED2021-129816B-I00) and ALGEMAR (PID2021-123825OB-I00)., Shapefile "Interpret_L". Shapefile "Interpret_P". MainMapReferences.pdf, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset for the paper: Fernández, Ricardo; Papanikolaou, Stefanos; Bruno, Giovanni; González-Doncel, Gaspar; Alava, Mikko. 2023. Creep in polycrystalline metals as a phase transition: experiments and a minimal random-field Ising model

  • Fernández, Ricardo
  • Papanikolaou, Stefanos
  • Bruno, Giovanni
  • González-Doncel, Gaspar
  • Alava, Mikko
Experimental tests have been carried out by applying a constant stress to the materials under study (Al-99.8% as well as AA6061alloy) and increasing the temperature from room temperature to 800K. The heating rate used was 2K/min. We implemented the three-dimensional random-field Ising model, both as function of stress and as a function of temperature for cubic supercells of 16×16×16 sites. We also investigated the behavior of the secondary creep strain rate ε ˙_SS as a function of temperature at different disorder strength ∆ = 0, 0.5, 1, 1.5, 2, i.e. different applied stress., This work was funded by Ministerio de Asuntos Económicos y Transformación Digital (TED2021-129580B-100 (ECOAUTO) and MAT2017-83825-C4-1-R ()., ThermalZeroField_T-M-DataSet_RFvariance_000000_1.ascii ThermalZeroField_T-M-DataSet_RFvariance_000000_5.ascii ThermalZeroField_T-M-DataSet_RFvariance_000001_0.ascii ThermalZeroField_T-M-DataSet_RFvariance_000001_5.ascii ThermalZeroField_T-M-DataSet_RFvariance_000002_0.ascii AthermalField_sigma-M-DataSet_RFvariance_000000_1.ascii AthermalField_sigma-M-DataSet_RFvariance_000000_5.ascii AthermalField_sigma-M-DataSet_RFvariance_000001_0.ascii AthermalField_sigma-M-DataSet_RFvariance_000001_5.ascii AthermalField_sigma-M-DataSet_RFvariance_000000_1.ascii strain_rate-vs-temp-pureAl-11MPa.ascii strain_rate-vs-temp-pureAl-17MPa.ascii strain_rate-vs-temp-pureAl-32MPa.ascii strain_rate-vs-temp-AA6061-17MPa.ascii strain_rate-vs-temp-AA6061-32MPa.ascii strain_rate-vs-temp-AA6061-38MPa.ascii strain_rate-vs-temp-AA6061-45MPa.ascii, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting information of: Effect of the effective refractive index on the radiative decay rate in nanoparticle thin films [Dataset]

  • Romero Aguilar, Manuel
  • Sánchez-Valencia, J. R.
  • Lozano, Gabriel
  • Míguez, Hernán
In this work, we theoretically and experimentally study the influence of the optical environment on the radiative decay rate of luminescent nanoparticles forming a thin film. We use electric dipole sources in finite-difference time-domain simulations to analyze the effect of modifying the effective refractive index of transparent layers made of phosphor nanocrystals doped with rare earth cations, and propose a significant correction to previously reported analytical models for calculating the radiative decay rate. Our predictions are tested against an experimental realization of such films, in which we manage to vary the effective refractive index in a gradual and controllable manner. Our model accurately accounts for the measurements attained, allows us discriminating the radiative and non-radiative contributions to the time-resolved photoluminescence, and provides a way to rationally tune the spontaneous decay rate and hence the photoluminescence quantum yield of an ensemble of nanoparticles., This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Programme (NANOPHOM, grant agreement no. 715832), from the BBVA Foundation Leonardo Grant for Physics Researchers 2023, and from MCIN/AEI/ 10.13039/501100011033 by European Union NextGeneration EU/PRTR under grant TED2021-129679B-C22., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary Material for: Modelling and operation strategy approaches for on-site Hydrogen Refuelling Stations [Dataset]

  • Cardona, Pol
  • Costa Castelló, Ramon
  • Roda, Vicente
  • Carroquino, Javier
  • Valiño García, Luis
  • Ocampo-Martínez, Carlos
  • Serra-Prat, María
S1. Operational strategy flow chart: The operational strategy simplified flow chart of the main filling and refuelling events logic is shown in Figure S.1. Operational strategy simplified flow chart concerning the cascaded filling and refuelling processes of the HRS. Compressor C1 and the battery operational strategy is not shown. S2. One-day long simulation supplementary results: This section complementary results for the same simulation configuration of 8 daily HDFVs and 60 kg/day of demand and case c) of Figure 3 of the manuscript. Figure S.2: Compressors flow and power consumption. Simulation configuration: case c) with 60 kg/day and 8 HDFV per day. Results for the first day of January, 2016. Figure S.3: (A) left: direct beam irradiance. (A) right: photovoltaic power generation. (B) left: direct beam irradiance. (C) right: electrolyzer H2 flow rate production. (D) left: power balance of the HRS. (D) right: power balance of the HRS without the battery participation. (D) left: State-of-Charge of the battery. (D) right: power charging/discharging rate applied to the battery. Simulation configuration: case c) with 60 kg/day and 8 HDFV per day. Results for the first day of January, 2016. S3. One-year long simulation results: Figure S.4: H2 tanks pressure dynamic results of case c) with 60 kg/day and 8 HDFV per day. Results for one year of simulation (2016). Figure S.5: (A) left: direct beam irradiance. (A) right: photovoltaic power generation. (B) left: direct beam irradiance. (C) right: electrolyzer H2 flow rate production. (D) left: power balance of the HRS. (D) right: power balance of the HRS without the battery participation. (D) left: State-of-Charge of the battery. (D) right: power charging/discharging rate applied to the battery. Simulation configuration: case c) with 60 kg/day and 8 HDFV per day. Results for one year of simulation (2016). Figure S.6: (A) left: cumulative H2 production emissions in Spain [51]. (A) right: equivalent emissions of the photovoltaic generation in Spain [51]. (B) left: cumulative greenhouse gas emission intensity of H2 production in Spain [51]. (B) right: emission savings according to [51]. Simulation configuration: case c) with 60 kg/day and 8 HDFV per day. Results for one year of simulation (2016). Figure S.7: (A): cumulative HRS operation emissions due to power consumption/injection to the utility grid in Spain [51]. (B) left: cumulative greenhouse gas emission intensity of HRS operation in Spain [51]. (B) right: emission savings according to [51] considering all power loads and the photovoltaic and battery inputs of the model. Simulation configuration: case c) with 60 kg/day and 8 HDFV per day. Results for one year of simulation (2016).-- The ambient temperature is considered constant at 298 K..-- Under a Creative Commons license BY-NC-ND 4.0., S1 Operational strategy flow chart. S2 One-day long simulation supplementary results. S3 One-year long simulation results.-- S2: Results for the first day of January, 2016, in Zaragoza (Spain).-- S3: Results for one year of simulation (2016).-- MATLAB/SimulinkⓇ has been employed as the simulation platform., This research has been developed within the CSIC Interdisciplinary Thematic Platform (PTI+) Transición Energética Sostenible+ (PTI-TRANSENER+)[TRE2103000] as part of the CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094; project MASHED [TED2021-129927B–I00] funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR; and the project MAFALDA [PID2021-126001OB-C31] funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Data set for "Optimal wave reflection as mechanism for seagrass self-organization"

  • van de Vijsel, Roeland C.
  • Hernández-García, Emilio
  • Orfila, Alejandro
  • Gomila, Damià
All methodological information is in the paper "Optimal wave reflection as mechanism for seagrass self-organization" by Roeland C. van de Vijsel, Emilio Hernández-García, Alejandro Orfila, Damià Gomila to appear in Scientific Reports., Whenever you use any part of the data (scripts, figures, raw and processed data) described in this README-file, please make sure to correctly refer to this dataset, the manuscript described above and its authors., Full data set used for the following manuscript: Optimal wave reflection as mechanism for seagrass self-organization by R.C. van de Vijsel, E. Hernández-García, A. Orfila, D. Gomila, to appear in Scientific Reports (2023). The data set contains all the necessary codes and simulation and raw data to reproduce the results discussed in the associated manuscript. Folder "Figure scripts" contains the Matlab codes and associate raw data to generates all the figures of the manuscript. Folder "v28" contains the Matlab scripts that calculate uniform basic state for a given set of model parameters and numerically time-integrate the perturbation equations. It also contains all simulation results and figures, generated with the above Matlab scripts. Folders "v33" to "v39" contain variations of the codes in "v28"., Project CYCLE (PID2021-123723OB-C22) funded by MCIN/AEI/10.13039/501100011033 and ERDF “A way of making Europe”; María de Maeztu project CEX2021-001164-M618 funded by the MCIN/AEI/10.13039/501100011033; European Union’s Horizon 2020 research and innovation programme (Grant agreement ID: 101093910, Ocean Citizen). Project LAMARCA (PID2021-123352OB-C31 and PID2021-123352OB-C32) funded by MICIN/AEI621/FEDER, UE; Project Tech2Coast (TED2021-130949B-I00) funded by MCIN/AEI,EU “NextGenerationEU/PRTR”., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001164-M618)., Please, see data_description.pdf file., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary data for Nanoparticles of poly(3-hexylthiophene): Toward a solvent-independent performance of electrochromic films [Dataset]

  • Canovas Saura, Antonio
  • Colom, E.
  • Padilla Martínez, Javier
  • Urbina, Antonio
  • Maser, Wolfgang K.
  • Benito, Ana M.
S2. Redox charge density & thickness: Figure S2. Cyclic voltamogramms of the different P3HT film series with different film thicknesses (indicated by different colors) taken at a scan rate of 20 mV/s. A) P3HT-CHCl3 B) P3HT-THF C) P3HT-CHCl3(NP) D) P3HT-THF(NP). Respective figures E), F) ,G) and H) represent the linear relations found between resulting redox charge densities and measured thicknesses (colors of each film thickness according to the corresponding cyclic voltammogram). Redox charge density values in units of mCcm-2 are calculated by the integration of the anodic and cathodic CV curves for each thickness followed by dividing the obtained values by the scan rate and the probed surface area.-- Figure S3. Transmittance values at 520 nm for the P3HT film series taken in their A) oxidized transparent states and B) neutral colored states as a function of the calculated redox charge density. Symbols represent experimental data points. Lines represent the fitted curves according to exponential decay functions. Regression coefficients r2 are indicated for all the film series. The transmittance curve for P3HT-CHCl3 in the neutral state not only shows overall higher transmittance values but also its exponential fitting curve with lowest regression coefficient strongly deviates from the behavior of all the other films. The different and rather poor transmittance behavior reflects the non-continuous island-like coating of the ITO substrate obtained for this sample by the employed spray-coating process, as demonstrated by the SEM and profilometry results in the main manuscript (Figure 5D and 6D, respectively). The poor transmittance behavior of the spray-coated P3HT-CHCl3 sample in the neutral state thus accounts for the largely different contrast behavior compared to the other P3HT samples, with an apparent shift of the optimum contrast range towards rather high, i.e. out-of-range redox charge density values, as a consequence of unsatisfying fitting results.--, Figure S4. Transmittance spectra of a P3HT film in its neutral and oxidized states.-- Figure S5. A) Transmittance vs. time plot a P3HT-THF film. B) Contrast vs. pulse length extracted from the previous data and corresponding fitting function from which τ values can be obtained.-- Figure S6. A) Transmittance vs. time plot for a P3HT-THF film. B) Contrast vs. number of cycles extracted from the previous data and corresponding fitting function from which N80 values can be obtained.-- Figure S7. Characterization of spin-coated P3HT films deposited from chloroform. A) SEM image obtained at 30 kX magnification (scale bar 200 nm). B) Profilometry of a representative film with average thickness of 77 nm. C) Transmittance in transparent and colored states, together with resulting contrast, versus redox charge density. D) Switching speeds, represented by t90 values versus redox charge density. E) Cycling stability, represented by the number of cycles corresponding to a 20 % loss of the initial contrast value, i.e. N80 value. F) Images of delaminated films after cycling stability tests. Table S1. Electrochromic performance parameters for spin-coated P3HT-CHCl3 series.--, Under a Creative Commons license BY-NC-ND 4.0., S1. UV-vis absorption spectra. S2. Redox charge density & thickness. S3. Stationary transmittance at 520 nm. S4. Transmittance spectra. S5. Switching speed. S6. Stability test. S7. Spin-coated P3HT-CHCl3 film. References., S1. UV-vis absorption spectra: The UV-vis spectra (Figure S1) of P3HT-THF and CHCl3 solutions show a featureless broad π-π* transition absorption band with its maximum at 445 nm, typical for amorphous P3HT. This band is red-shifted to 510 nm for the nanoparticle polymer P3HT (NP) dispersions. The spectra for these dispersions also show the appearance of peaks at 520 nm, 560 nm, and 620 nm, which indicate the existence of vibronic transitions caused by the internal aggregation of the P3HT chains inside the nanoparticles.[1,2] The acquired aggregate structure with its electronic transitions of the P3HT (NPs) in dispersion is maintained when deposited in the form of films onto substrates.-- S2. Redox charge density & thickness: Figure S2 shows the cyclic voltammograms of the different P3HT film probed for different film thicknesses at a scan rate of 20 mV/s in the potential window from -0.3 to 1.1 V vs. Ag/AgCl reference electrode (RE), calibrated at 0.45 V vs. ferrocene. The surface area exposed to the electrolyte is about 1 cm2.-- S3. Stationary Transmittance: Figure S4 show the stationary transmittance curves of the P3HT film series taken at 520 nm in the oxidized and neutral state as a function of the calculated redox charge densities. Experimental data points are fitted by exponential decay functions. The P3HT film series show similar transmittance curves in the oxidized state (Figure S3A), while those in the neutral state (Figure S3B) exhibit larger deviations. The difference between transmittance values in the oxidized and neutral state then provides the contrast curve as a function of the redox charge density as shown in Figure 2 of the main manuscript.--, S4. Transmittance spectra: Figure S4 shows the transmittance spectra of P3HT-THF film acquired in its neutral and oxidized states, reflecting its magenta and transparent pale blue colors, respectively. The transmittance minimum is obtained at 520 nm for the neutral state and provides the reference value at which maximum contrast, i.e. transmittance differences between the oxidized and neutral state is calculated for the different P3HT film series.-- S5. Switching speed: The switching speed of the P3HT films has been determined following the experimental procedure described in the experimental section of the main manuscript. Here the films are submitted to potential steps of variable pulse lengths of 15, 10, 5, 2, 1, 0.5 and 0.25 s between -0.3 and 1.1 V. A representative case study for a P3HT-THF film is depicted in Figure S5.-- S6. Cycling stability: The cycling stability of the P3HT films has been determined following the experimental procedure described in the experimental section of the main manuscript. Here the films are submitted to a number of potential steps between -0.3 and 1.1 V: 300 cycles of 10 s for each step were applied. A representative case study for a P3HT-THF film is depicted in Figure S6.-- S7. Spin-coated P3HT-CHCl3 film: Spin-coating of non-nanostructured P3HT-CHCl3 dispersions, provides a continuous film coverage of the ITO substrate, as can be seen by SEM (Figure S7A) and the profilometry curve of a representative film with average film thickness of 77 nm (Figure S7B). Therefore, the electrochromic transmittance and contrast behavior at 520 nm (Figure S7C) now shows more consistent results, comparable to those of the spray-coated films of the other P3HT series. This especially refers to the optimum redox charge density and maximum contrast being achieved. Equally, t90 switching speed (Figure S7D), as well as the cycling stability (Figure S7E) in the optimum redox window reveal a behavior close to the ones of the other spray-coated film series. However, the spin-coated P3HT-CHCl3 film is prone to delamination issues (Figure S7F), compromising the mechanical integrity of the film, and thus as well the contact to the underlying substrate. This results in the non-linear enhancement of the t90 switching and the decrease of the cycle stability, beyond the established optimum redox charge densities window, as can be seen in Figure S7D and S7E, respectively. The overall electrochromic performance parameters for the spin-coated P3HT-CHCl3 series are summarized in Table S1., This work was funded by Ministerio de Ciencia e Innovación-Agencia Estatal de Investigación (MCIN-AEI, Spain) under Grant numbers PID2019-104272RB-C55/AEI/10.13039/501100011033, PID2019-104272RB-C51/AEI/10.13039/501100011033 and TED2021-129609B-I00/MCIN/AEI/10.13039/501100011033 (co-funded by European Union NextGenerationEU/PRTR). A.C-S acknowledges financial support from UPCT-Banco Santander through a research grant (“Iniciación en investigacion” Program 2021). W.M. and A.M.B acknowledge financial support from Gobierno de Aragon (DGA) under project “Grupos de Investigación Reconocidos” T03_23R. E.C. is grateful for his PhD grant from MINECO (FPI BES2017-080020) and associated European Social Funds (ESF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset of Operando Exploration of Tribochemical Decomposition in Synthetic FeS2 thin film and Mineral Iron Pyrite

  • Muñoz-Cortés, Esmeralda
  • Sánchez-Prieto, Jesús
  • Zabala, Borja
  • Sánchez, Carlos
  • Flores, Eduardo
  • Flores, Araceli
  • Román García, Elisa Leonor
  • Ares, José R.
  • Nevshupa, Roman
FeS2 thin films were obtained by sulfuration of Fe coatings, which were deposited by thermal evaporation of iron powder (Goodfellow, 99.99%) on soda lime glass substrates under high vacuum. The initial thickness of the Fe coatings was 300±20 nm as measured using quartz crystal microbalance. The Fe coating was transferred into a glass ampoule, which contained a small amount of sulfur powder (Merck, 99.99%) placed at one end. The ampoule was evacuated down to 10-5 mbar and sealed. Then, sulfur was sublimated by heating to 300ºC for 20 h, while sulfur vapour at a pressure of about 0.065 bar reacted with the Fe film. After sulfuration, the coatings were kept in the same sealed ampoules at room temperature until they were characterized. Natural pyrite was used to contrast the results obtained for artificial FeS2 thin film. A sheet of iron pyrite was cut from a native crystal proceeding from Peru mines and polished. X-ray diffraction analysis showed a typical cubic crystal structure of the mineral sample. The iron coatings' crystal structure was analyzed both before and after sulfuration using grazing-angle X-ray diffraction (XRD). This was accomplished by employing Cu Kα radiation and maintaining a fixed incidence angle of 1.7°. To determine the mean crystallite size, the Scherrer formalism was applied to the main diffraction band (200). Film thickness measurements were conducted at the film edge utilizing a stylus profilometer, achieving an accuracy of 10 nm. The mechanical properties of the FeS2 coatings were investigated through nanoindentation (G200, KLA Corp.), utilizing a Berkovich diamond tip in dynamic contact mode. The maximum indentation depth was 100 nm constrained to remain below 10% of the total coating thickness. The loading cycle was carried out at a constant indentation strain rate of 0.1 s-1 and a small oscillating force was superimposed to this loading ramp (75 Hz of frequency, amplitude of 2 nm). Continuous measurement of the contact stiffness was achieved on the basis of the phase lag between the sinusoidal force and the penetration produced. X-ray Photoemission Spectrometry (XPS) was used to obtain information on chemical state of various elements under ultra-high vacuum (UHV) with a pressure below 10-8 Pa. Mg Kα radiation with an energy of 1253.6 eV was employed. To eliminate any airborne adsorbed contaminants from the sample surface, ensuring a pristine surface for subsequent XPS analysis, the samples underwent Ar+ ion sputtering with an energy of 1 keV and an incident angle of 60° with respect to the sample normal. The sputtering depth was around 1.3 Å. It should be noted that Ar+ ions for sputtering can potentially alter the chemical oxidation state of Fe and/or S and/or change the surface composition due to preferential sputtering. No additional treatment was performed. High-resolution XPS analysis of Fe 2p, S 2p, O 1s, and C 1s was conducted through the fitting process employing the minimum possible number of components compatible with the expected chemistry. For instance, both the Fe 2p3/2 and Fe 2 p1/2 spin-orbit peaks were fitted to ensure the coherence of the procedure, while assuming a Shirley background. For the sake of simplicity, only the Fe 2p3/2 bands are discussed here. The S 2p peak was fitted employing a S 2p3/2 S 2p1/2 doublet, considering the theoretical spin-orbit coupling ratio of 1:2. A fixed separation of 1.2 eV between the S 2p3/2 and S 2p1/2 was maintained based on literature for data processing., Electron Stimulated Desorption (ESD) coupled with mass spectrometry was used to examine the chemical composition of the adsorbed layers and the surface chemical groups. The sample was bombarded with electrons using an electron gun positioned at a 60° angle to the surface normal. Unless otherwise mentioned, the electron energy used was 600 eV. The ions, which were generated on the surface due to electron bombardment, released from the sample and were detected using a quadrupole mass spectrometer, situated in front of the sample. More details about the setup and process of the ESD experimental system can be found elsewhere. Thermal Gravimetric analysis of thin films was used to analyse the gases emitted during progressive heating under both Ar and dry air flows using a mass spectrometer. The rate of linear heating was set at 5, 10, and 20 °C/min. The emitted gases were analysed in the range of 1-90 a.m.u. The Rutherford Backscattering Spectrometry (RBS) and Elastic Recoil Detection Analysis (ERDA) techniques, available at the Centre of Microanalysis of Materials of Autonomous University of Madrid, were employed to determine the elemental composition of the sample surfaces. Its 5MV linear tandem accelerator facility provides the ion beams to carry out the characterization with these techniques. In this study, a collimated He+ beam with energies of 3.035 or 4.260 MeV extracted from the accelerator was used, while choice of these energies’ values justified under resonant conditions for oxygen and carbon respectively. For RBS analysis, the backscattered ions were detected at an angle of 170° with respect to the direction of the incident ion beam. In the case of ERDA, the ions were directed to the surface at an incident angle of 75° with respect to the surface normal. Recoiled particles were collected at 30°. To filter out heavier ions, a 19 µm thick mylar film was placed in front of the detector to obtain the hydrogen depth profile. The total ion dose in each measurement was set to 15 µC with a particle flux of 5.5x1012 cm-2 s-1 and a probe size of 1.5x1.5 mm2. The spectra were taken with the samples at random orientations. For energy-to-depth conversion, common SRIM (Stopping and Range of Ions in Matter) energy loss data were used, along with reference samples of MgH2 Er-doped TiO2 coatings. The RBS-ERDA spectra were fitted using SIMNRA simulation software. The gases emitted during mechanical activation of the materials were analysed using an original UHV experimental system equipped with a quadrupole mass spectrometer (Hiden HALO), a reciprocating motion UHV-grade friction cell, and a dynamic gas expansion system. Such a configuration allows accurate quantification of minute emission rates down to 1 pmol s-1. The samples were rubbed under UHV using alumina spheres, 3 mm in diameter. The rubbing conditions, unless otherwise stated, were as follows: the normal load of 0.44 N, the frequency of reciprocating motion of 1 s-1, and the mean rubbing velocity of 0.18 m s-1. The experimental system is schematically shown in Figure 1 and described in detail elsewhere. Before the tests, the alumina spheres were thoroughly degreased consecutively in acetone and isopropanol ultrasonic baths. After drying, they were submerged in a hot Piranha solution to remove carbon and metal residues, rinsed with ultrapure water, and dried in an N2 stream. The differential mass spectra (DMS) were derived by subtracting the mean steady background mass spectra from the mean mass spectra recorded during the application of the mechanical stimulus. Only statistically significant changes (α=0.05) in DMS were analysed among the channels within the 1 – 100 a.m.u. range. To ensure comparability, the mass spectra were normalized by dividing by the total ion current in each spectrum. The tentative identification of ion species was based on reference cracking patterns from the NIST Webbook (NIST Webbook). The gas composition was determined through a backward stepwise regression method, in which we utilized reference mass spectra of various potential gas precursors. These spectra were fitted in various combinations to the experimental DMS with the aim of identifying the combination that included the fewest precursors and achieved a high R2adj value. Behavioural analysis (BA) was employed to develop better understanding of the mechanisms of underlying tribochemical processes. BA allows to explore the short- and long-term trends of highly dynamic emission time series, to establish the degree of correlation between the mass spectrometer signals, and to trace them back to the possible emission sources in the mechanically affected bulk material and/or on the mechanically affected surfaces. Chemical changes in the Mechanically Affected Zones (MAZ) were studied using vibrational spectroscopy (Raman and FTIR). All the results were benchmarked against the spectra obtained from neighbouring pristine surfaces. Raman spectra were measured using a 532 nm laser in air. Infrared micro-reflectance spectra were obtained using a micro-FTIR spectrometer., Datasets of mass-spectrometry signals were obtained in the experiments with non-thermal tribochemical decomposition of synthetic thin-film iron sulphide and mineral iron pyrite. Tribochemical reactions were studied on a micrometre scale using localized rubbing under ultrahigh vacuum. Mechanically Stimulated Gas Emission Mass-Spectrometry (MSGE-MS) including the Dynamic gas expansion method was used to determine the kinetic parameters of gas emission and the composition of the emitted gases. The study was complemented by structural, morphological, tribological, mechanical and surface analyses. It was found that carbon-containing gases were dominating. The sulfur-containing gases comprised H2S, COS and CS2. The latter two were unexpected. The emission of these gases was traced back to solid-state chemical reactions kinetically controlled by the precursor concentrations and driven through non-thermal mechanisms, which we tentatively assigned to formation of sulfur radicals., This study was co-funded by Spanish Ministry for Science and Innovation (grants PID2019-111063RB-I00, PID2020-112770RB-C22, PID2020-117573GB-I00, RTI2018-099794-B-I00, and TED2021-129950B-I00) and funding from Madrid Community (project S2018/NMT-4291 TEC2SPACE), Ministry of Science and Innovation of Spain (project CSIC13-4E-1794) and EU (FEDER, FSE)., 1. Dataset of mass-spectrometry time series of mechanically stimulated gas emission from sodium alanate (NaAlH4) pellets under vacuum.-- 2. Dataset of Thermal Programmed Desorption – Mass-Spectrometry (TPD-MS) analysis of sodium alanate.-- 3. Dataset of X-ray diffraction of sodium alanate.-- 4. Dataset of micro-FTIR spectra of pristine and mechanically activated surfaces of pellets of sodium alanate.-- 5. Dataset of Raman spectra measured on the surfaces of pellets of sodium alanate., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Strong light-matter coupling in lead halide perovskite quantum dot solids [Dataset]

  • Bujalance, Clara
  • Calió, Laura
  • Dirin, Dmitry N.
  • Tiede, David O.
  • Galisteo-López, Juan F.
  • Feist, Johannes
  • García-Vidal, Francisco J.
  • Kovalenko, Maksym V.
  • Míguez, Hernán
Strong coupling between lead halide perovskite materials and optical resonators enables both the polaritonic control of the photophysical properties of these emerging semiconductors and the observation of novel fundamental physical phenomena. However, the difficulty to achieve optical-quality perovskite quantum dot (PQD) films showing well-defined excitonic transitions has prevented the study of strong light-matter coupling in these materials, central to the field of optoelectronics. Herein we demonstrate the formation at room temperature of multiple cavity exciton-polaritons in metallic resonators embedding highly transparent Cesium Lead Bromide quantum dot (CsPbBr3-QD) solids, revealed by a significant reconfiguration of the absorption and emission properties of the system. Our results indicate that the effects of biexciton interaction or large polaron formation, frequently invoked to explain the properties of PQDs, are seemingly absent or compensated by other more conspicuous effects in the CsPbBr3-QD optical cavity. We observe that strong coupling enables a significant reduction of the photoemission linewidth, as well as the ultrafast modulation of the optical absorption, controllable by means of the excitation fluence. We find that the interplay of the polariton states with the large dark state reservoir play a decisive role in determining the dynamics of the emission and transient absorption properties of the hybridized light-quantum dot solid system. Our results open the route for the investigation of PQD solids as polaritonic optoelectronic materials., This project has received funding from the Spanish Ministry of Science and Innovation-Agencia Estatal de Investigación (MICIN-AEI) under grants PID2020-116593RB-I00 and TED2021-129679B-C22, funded by MCIN/AEI/ 10.13039/501100011033 and by Unión Europea NextGenerationEU/PRTR, by the Junta de Andalucía under grant P18-RT-2291 (FEDER/UE) and the Innovative Training Network (ITN) Persephone, funded by the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 956270. M. V. K. and D.D.; from the Air Force Office of Scientific Research and the Office of Naval Research (award number FA8655-21-1-7013); from the Spanish MICIN–AEI under grants PID2021-125894NB-I00 and CEX2018-000805-M (through the María de Maeztu program for Units of Excellence in Research and Development); from Junta de Andalucía and the European Regional Development Funds (EU-FEDER) under program (DOC_00220)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2018-000805-M)., Folder List: 1. Figure_1 - Figure1_d: Absorptance; PL (counts) dispersion QDs - Figure1_e: Absorptance; PL (counts) film QDs - Figure1_f: Absorptance cavity QDs 26º, 36º, 46º - Figure1_g: Absorptance; second derivative dispersion QDs - Figure1_h: Absorptance; second derivative film QDs - Figure1_i: Absorptance; second derivative cavity QDs 2. Figure_2 -Figure2_a_experimental_map_right: experimental dispersion A vs. k|| s-polarised -Figure2_a_theoretical_map_left: theoretical dispersion A vs. k|| s-polarised -Figure2_a_experimental_maxima: experimental A maxima s-polarised -Figure2_a_JCmodel: theoretical polaritonic dispersion from JC model s-polarised -Figure2_b_experimental_map_right: experimental dispersion A vs. k|| p-polarised -Figure2_b_theoretical_map_left: theoretical dispersion A vs. k|| p-polarised -Figure2_b_experimental_maxima: experimental A maxima p-polarised -Figure2_b_JCmodel: theoretical polaritonic dispersion from JC model p-polarised -Figure2_c: Hopfield coeffcients lower polariton -Figure2_d: Hopfield coeffcients middle polariton -Figure2_e: Hopfield coeffcients upper polariton 3. Figure_3 -Figure3_a: transient absorption map of the cavity vs. wavelength -Figure3_b: delta A at 0.4 and 10ps vs. wavelength -Figure3_c: |delta A| vs. time -Figure3_d: transient absorptance (delta A + A) of the cavity vs. wavelength -Figure3_e: deconvoluted delta A -Figure3_f: deconvoluted delta A + A -Figure3_g: dinamics of I_PIA, Area_overlap MP-LP, and energy splitting vs. time 4. Figure_4 -Figure4_a: PL of QDs film vs. angle of collection -Figure4_b: Pl of QDs cavity vs. angle of collection -Figure4_c: experimental dispersion A vs. k|| -Figure4_d: PL dispersion vs. k|| -Figure4_e_data: PL decay data vs.time of colloidal dispersion, film and cavity -Figure4_e_fits: lognormal fit of PL decay data vs.time -Figure4_f: distribution of decay rates, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

[Dataset] Interchain Expanded Extra-Large Pore Zeolites

  • Gao, Zihao Rei
  • Yu, Huajian
  • Chen, Fei-Jian
  • Mayoral, Álvaro
  • Niu, Zijian
  • Niu, Ziwen
  • Li, Xintong
  • Deng, Hua
  • Márquez Álvarez, Carlos
  • He, Hong
  • Xu, Shutao
  • Zhou, Yida
  • Xu, Jun
  • Xu, Hao
  • Fan, Wei
  • Balestra, Salvador R. G.
  • Ma, Chao
  • Hao, Jiazheng
  • Li, Jian
  • Wu, Peng
  • Yu, Jihong
  • Camblor, Miguel Ángel
Source data for the article entitle "Interchain Expanded Extra-Large Pore Zeolites", Nature 2024, including the detailed structural and physicochemical and chemical characterization of those zeolites, [EN] 1. Description of methods used for collection/generation of data: Diffraction (electron, synchrotron X-ray, neutron). Infrared spectroscopy multinuclear MAS NMR gas adsorption electron paramagnetic resonance DFT calculations Catalytic reaction 2. Methods for processing the data: Those needed depending on the type of data (SHELX, Rietveld refinement, fast Fourier Transform...). Please, check the paper., Spanish Ministry of Science Innovation, PID2019-105479RB-I00, TED2021-131223B-I00 projects, and RYC2018-024561-I and FJC2018-035697-I National Natural Science Foundation of China, 22371121, 22288101, 21920102005, 21835002, 22271115 and 52270111 National Key Research and Development Program of China, 2022YFA1503600, 2021YFA1501202, 2021YFA1501401 the 111 project, B17020 Fundamental Research Funds for the Central Universities of China, 020514380306 Consejería de Universidades, Investigación e Innovación, Junta de Andalucía, POSTDOC_21_00069 Knut and Alice Wallenberg Foundation, KAW, 2012-0112 European Union’s Horizon 2020 research and innovation program, 823717-ESTEEM3 regional government of Aragon, DGA E13_20R China Spallation Neutron Source, P1823060200002, Fig-2.xlsx; Ex-Fig1.xlsx; Ex-Fig. 3.xlsx; Ex-Fig. 6.xlsx; Ex-Fig. 7.xlsx; Ex-Fig. 8.xlsx; Fig-S8.xlsx; Fig-S9.xlss; Fig-S10.xlsx Fig-S11.xlsx Fig-S12.xlsx Fig-S13.xlsx Fig-S14.xlsx Fig-S15.xlsx Fig-S16a.csv Fig-S16b.csv Fig-S17.csv Fig-S18.xlsx; Fig-S19.csv; Fig-S20.xlsx; Fig-S21.xlsx; Fig-S22a.csv; Fig-S22b.csv; Fig-S23.xlsx; Fig-S24.xlsx; Fig-S25.xlsx, No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

TSEB implementation for the manuscript 'Evaluating the precise grapevine water stress detection using unmanned aerial vehicles and evapotranspiration-based metrics'

  • Burchard-Levine, Vicente
  • Borra-Serrano, Irene
  • Peña Barragán, José Manuel
  • Kustas, William P.
  • Guerra, José G.
  • Dorado, José
  • Mesías-Ruiz, Gustavo A.
  • Herrezuelo, Miguel
  • Mary, Benjamin
  • McKee, Lynn M.
  • Castro, Ana Isabel de
  • Sanchez-Élez, Sara
  • Nieto, Héctor
This dataset was used to run the remote sensing-based two-source energy balance (TSEB) model to estimate evapotranspiration and related crop stress indicators using high-resolution imagery from unmanned aerial vehicles (UAVs) over a a vineyard experimental site in Madrid, Spain ('El Socorro', Belmonte de Tajo, Madrid, Spain). The dataset includes an example script to run the python implementation of TSEB (pyTSEB, https://github.com/hectornieto/pyTSEB) forced with UAV imagery and meteorological data acquired over the study site. The model outputs are also provided for the different TSEB version (TSEB-PT and TSEB-2T). These results are associated with the manuscript titled 'Evaluating the precise grapevine water stress detection using unmanned aerial vehicles and evapotranspiration-based metrics' published in Irrigation Science., The experiment was undertaken under the Digital Agriculture Technologies for Irrigation efficiency (DATI) project (2020-2024) funded by the Spanish Ministry of Science and Innovation (AEI/10.13039/501100011033) and the PRIMA EU program. It additionally received support from the EO4WUE research project (TED2021-129814B-I00) funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. We also would like to thank Dr. Bill Kustas and USDA for helping with research infrastructure and scientific support., All the inputs and outputs of the two-source energy balance (TSEB) model are in the 'inputs' and 'outputs folder. Another readme file explicitely describes this data. Also described below: ## inputs ### meteo A csv file with meterological and EC measurements during UAV overpass time. ### UAV UAV imagery are stored in seperate folders for each date (in YYYYMMDD). Each input is available over the study site at 2m spatial resolution. ## outputs The model outputs are available for both TSEB-PT and TSEB-2T versions using pyTSEB (https://github.com/hectornieto/pyTSEB). In each folder, both Main ('Main') and ancillary ('Anc') output data is made available., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Quantitative Study of Triboemission Kinetics from Polymer Fiber-Reinforced Mortar Paving Blocks: Unraveling the Dynamics of Nanoparticle Aerosol Release

  • Husanu, Francisca
  • Alonso, Álvaro
  • Calderón, Verónica
  • Castellote, Marta
  • Nevshupa, Roman
Triboemission_data.xlsx DVS_data.xlsx N2_isotherm_data.xlsx He pycnometry_data.xlsx Raman_data.xlsx, Mortar blocks with addition of recycled polyurethane fibers (PUF) were subjected to abrasion using an original pin-on-disk tribometer in order to investigate the kinetic parameters and emission mechanisms of fine and ultrafine aerosol nanoparticles and the effect of the fiber concentration on the mechanical, tribological, and triboemission properties. Three different samples, referred as A (20% substitution level), B (40%), and C (60%) and a reference sample (Ref.) were analyzed for this study. The abrasion was performed in an environment chamber with filtered air using a stationary alumina sphere, 20 mm in diameter, which was pressed against the rotating sample using a dead weight of 1.3 kg. The sliding speed was 1 m s-1. A quantitative methodology was employed to assess the deposition rate, particle size distribution, and emissivity. The triboemission properties were correlated with the pore structure, morphology and tribochemical transformations of the particles and worn surfaces. The specific surface area, distribution of micro- and mesopore sizes, and skeleton density were evaluated through a comprehensive analysis involving three distinct methods: dynamic water adsorption, N2 adsorption, and He pycnometry. The mechanically affected zones were characterized using white-light confocal microscopy and Raman spectroscopy. The function of the particle size distribution exhibited two modes, with the most probable particle size falling within the range of 115-156 nm. Interestingly, the PUFs addition did not changed considerably the size of the particles. The aggregation of PUFs resulted in a gradual increase in the volume of pores, particularly mesopores, as well as an increase in the specific surface area. The study's results demonstrated a decline in the deposition rate of aerosol particles within the 10 to 60 nm aerodynamic diameter range as the concentration of PUFs increased. This observation strongly suggested the occurrence of direct emission of polymeric aerosol particles resulting from the abrasion of PUFs. The findings of this research provide valuable insights into the intricate relationship between material composition, particle size distribution, porosity, and emission kinetics., The work was funded by the Ministry of Science and Innovation of Spain with the contribution from the European Regional Development Fund and the European Union NextGenerationEU / PRTR through the contracts PID2019-111063RB-I00, TED2021-129950B-I00 and PDC2022-134014-I00. Also, the support was provided by the Regional Government of Castilla y León (BU070P20)., Triboemission_data.xlsx DVS_data.xlsx N2_isotherm_data.xlsx He pycnometry_data.xlsx Raman_data.xlsx, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Geomorphology of the Maladeta massif (Central Pyrenees): the traces of the last remaining glaciers [Dataset]

  • Vidaller, Ixeia
  • Moreno Caballud, Ana
  • Izagirre, Eñaut
  • Belmonte, Ánchel
  • Carcavilla Urquí, Luis
  • López-Moreno, Juan I.
We present a 1:15,000 geomorphological map of the Maladeta massif in the Central Pyrenees. Our methodology includes fieldwork, the analysis of aerial photographs from 1956 to 2015, and the use of drone flights from 2020 to 2023. The study area consists mainly of granodiorite but also has outcrops of limestone, shales, and quartzites at lower elevations. The landscape of the Maladeta massif is primarily shaped by glacial and periglacial processes, with fluvial, karstic, and hillslope dynamics manifesting in the lower regions. The assessment of moraine thickness has facilitated the determination of maximum glacier thickness during the Little Ice Age (LIA) and has shown that there is no correlation between ice thickness and glacier extent. After the LIA, the massif experienced a continuous glacier retreat. Currently, only 21.4% of the glacier area observed in 1956 remains., This research was made possible through the support of the Interreg-POCTEFA project OPCC ADAPYR, as well as the projects MARGISNOW (ref PID2021-124220OB-I00) and SNOWDUST (ref TED2021-130114B-I00). Ixeia Vidaller acknowledges financial support from the grant FPU18/04978., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Long-range molecular energy transfer mediated by strong coupling to plasmonic topological edge states (dataset)

  • Buendía, Álvaro
  • Giannini, V.
  • Sánchez-Gil, José A.
  • Barnes, William L.
  • Rider, Marie S.
Strong coupling between light and molecular matter is currently attracting interest both in chemistry and physics, in the fast-growing field of molecular polaritonics. The large near-field enhancement of the electric field of plasmonic surfaces and their high tunability make arrays of metallic nanoparticles an interesting platform to achieve and control strong coupling. Two dimensional plasmonic arrays with several nanoparticles per unit cell and crystalline symmetries can host topological edge and corner states. Here we explore the coupling of molecular materials to these edge states using a coupled-dipole framework including long-range interactions. We study both the weak and strong coupling regimes and demonstrate that coupling to topological edge states can be employed to enhance highly-directional long-range energy transfer between molecules., We.acknowledge financial support from the grants BICPLAN6G (TED2021-131417B-I00) and LIGHTCOMPAS (PID2022-137569NB-C41), funded by MCIU/AEI/10.13039/501100011033, “ERDF A way of making Europe”, and European Union NextGenerationEU/PRTR and from MCIU through predoctoral fellowship PRE2019-090689., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset of Exploring Tribochemical Transduction Pathways for Dehydrogenation of Molecular Hydrides

  • Muñoz-Cortés, Esmeralda
  • Leardini, Fabrice
  • Conte, Marcello
  • Campo, Ángel Adolfo del
  • Flores, Eduardo
  • Ares, José R.
  • Nevshupa, Roman
Cylindrical pellets 13 mm in diameter and ca. 2 mm thick were obtained by compacting, under uniaxial pressure of 65 MPa, of commercial powder of EDAB (Boron Specialties, 97% purity). The pellets were prepared and conserved under a static Ar atmosphere before and after the tests. X-ray diffraction (Cu Kα radiation, θ/2θ configuration, 10° - 60° 2θ range) was used to analyze the pellet structure. Thermal gravimetric analysis coupled with mass spectrometry (TGA-MS) under argon flow (heating rate: 10°C/min) was used to evaluate thermal stability and the composition of emitted gases. During the isothermal test the required temperature was attained at a heating rate 10 ºC/min and then maintained constant for 90-380 min depending on the temperature. The ion currents were measured in the range of mass-to-charge ratios from 1 to 90. Micro-Raman confocal spectrometry (incident laser: 532 nm, power: 5.6 mW) and FTIR microscopy was used to analyze the chemical structure of mechanically affected zones compared to pristine areas. It was conducted under normal atmosphere. In-plane thermal conductivity of EDAB pellets was determined using van der Pauw method. Nanoindentation with a Berkovich diamond tip (load: 5-20 mN, peak load hold time: 120 s, loading/unloading rates: 4-40 mN/min, 10 measurements for each load) was used to characterize mechanical properties. Tribochemical reactions under vacuum were studied in real time using Mechanically Stimulated Gas Emission Mass Spectrometry (MSGE-MS) which was described in detail elsewhere. This technique combines a mass-spectrometry, a nearly zero-emission ultrahigh vacuum friction cell and a dynamic gas expansion system. The latter allows for accurate quantification of emitted gas rates with the detection limit around 1 pmol/s. The tribostimulation of the pellets was done using an alumina ball, 3 mm in diameter, under normal load 0.44-1.1 N and the frequency of reciprocating motion 1 full cycle (forward and backward strokes) per second. The additional arrangements which were made to avoid undesirable gas emission sources other than triboemission from mechanically affected zones of the sample are described in ESI. The tribostimulated gas emission was determined from the mass-spectrometry signal and benchmarked against the steady background gas pressure with the indenter standing still. The Differential Mass-Spectra (DMS) were derived by subtracting the reference spectrum from the mass-spectra measured during tribostimulation. A separate experiment to investigate possible chemical changes in the EDAB under applied mechanical deformation was conducted using Nuclear Magnetic Resonance (NMR). For this experiment about 0.5 g of EDAB powder was grounded in a porcelain mortar just prior to the NMR analysis. A portion of the ground EDAB was analyzed using solid state Magic Angle Spinning (MAS) 1H and 11B NMR, while the other one was analyzed using 1H and 11B solution RMN using deuterated dimethyl sulfoxide (DMSO-d6) as a solvent., Datasets of mass-spectrometry signals were obtained in the experiments with non-thermal dehydrogenation of ethane 1,2-diamineborane through the application of mechanical energy. This study investigates whether the tribochemical approach can also be effective to release hydrogen from molecular hydrides such as ethane 1,2-diamineborane (EDAB). Surprisingly, despite dehydrogenating at a lower temperature than metal and complex hydrides, EDAB exhibited faint hydrogen release under mechanical stress. To understand this behavior, the tribochemical decomposition pathways of EDAB were investigated using operando Mechanically Stimulated Gas Emission Mass Spectrometry in combination with other surface and material characterization techniques. The lack of hydrogen emission from EDAB is attributed to a combination of strong intramolecular bonds (covalent and dative bonds) within the molecule, and weak intermolecular interactions (hydrogen bonds and van der Waals forces) between EDAB molecules., This study was co-funded by the Ministry of Science and Innovation of Spain (grants PID2019-111063RB-I00, PID2020-112770RB-C22, PID2020-117573GB-I00, RTI2018-099794-B-I00, and TED2021-129950B-I00)., 1.Dataset of mass-spectrometry time series of mechanically stimulated gas emission from ethane 1,2 dimineborane pellets under vacuum.-- 2. Dataset of Thermal Gravimetry – Mass-Spectrometry (TGA-MS) analysis of ethane 1,2 diamineborane.-- 3. Dataset of X-ray diffraction of ethane 1,2-diamineborane.-- 4. Dataset of micro-FTIR spectra of pristine and mechanically activated surfaces of pellets of ethane 1,2-diamineborane.-- 5. Dataset of Raman spectra measured on the surfaces of pellets of ethane 1,2-diamineborane.-- 6. Dataset of microindentation of pellets of ethane 1,2-diamineborane.-- 7. Dataset of friction force time-series measured during reciprocating rubbing of pellets of ethane 1,2-diamineborane under vacuum.-- 8. Dataset of Nuclear Magnetic Resonance (RMN EDAB) solid and liquid., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary material for Pursuing the circularity of wind turbine blades: Thermochemical recycling by pyrolysis and recovery of valuable resources [Dataset]

  • Royuela García, David
  • Martínez Ángel, Juan Daniel
  • López Sebastián, José Manuel
  • Callén Romero, M. Soledad
  • García Martínez, Tomás
  • Verdejo, Raquel
  • Murillo Villuendas, Ramón
  • Veses Roda, Alberto
Under a Creative Commons BY-NC-ND 4.0 license., GC/MS chromatogram for the oil at 400-450 °C.-- SEM micrographs and EDS analysis for WTBs..-- SEM micrographs and EDS analysis for the RFs resulting from pyrolysis.-- SEM micrographs and EDS analysis for the RFs resulting from pyrolysis + oxidation (both in fixed-bed)., The authors thank the Regional Government of Aragon (DGA) for the support provided under the research group support program and MINECO for their financial support (Project PID2021–123759OB-I00 and Project TED2021–130093B-C21). Authors also thank CSIC for the interdisciplinary thematic platforms SusPlast and SosEcoCir., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Raw data behind tables and figures- cocoa carob blend miRNA insulin sensitivity [Dataset]

  • Villalva, Marisol
  • García-Díez, Esther
  • López de las Hazas, María-Carmen
  • Iacono, Oreste Lo
  • Vicente-Díez, Ignacio
  • García-Cabrera, Sara
  • Alonso-Bernáldez, Marta
  • Dávalos, Alberto
  • Martín, M. Ángeles
  • Ramos, Sonia
  • Pérez-Jiménez, Jara
Whole dataset corresponding to a pilot controlled, acute, randomized, cross-over nutritional clinical trial in participants with T2D. This study evaluated the effects of a cocoa-carob blend (CCB) in the regulation of postprandial alterations., This work was supported by the grant RTI2018-095059-B-I00, funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”. Partially funded by TED2021-130962B-C21, financed by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/ PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary Information for Valorization of carbonaceous co-product obtained from iron ore-catalyzed methane cracking as support for Pd catalysts in toluene hydrogenation reaction [Dataset]

  • López de los Ríos, Jaime
  • Torres Gamarra, Daniel
  • Di Stasi, Christian
  • Ayala Cortés, Alejandro
  • Suelves Laiglesia, Isabel
  • Pinilla Ibarz, José Luis
11 figures, 7 tables.-- Under a Creative Commons BY-NC-ND 4.0 license, https://creativecommons.org/licenses/by-nc-nd/4.0/, Appendix A. Materials analysis: The XRD analysis of the iron from the ore used as a precursor to generated carbon nanomaterial shows that this iron is conformed only by hematite as shown in Figure S.1. XRD analysis also showed the presence of other metallic oxides such as MgO, SiO2 and CaO. A posterior analysis to the iron ore with N2 physisorption showed that the isotherm of the ore shown in Figure S2 corresponds to a solid with no porosity. XPS results of the catalyst’s surface analyses generated through the synthesis ways are shown in Figure S3. Analysis of the catalysts with N2 physisorption shown in Figure S4 revealed that the catalysts could be fitted to type IV isotherms, characteristic of mesoporous solids and the BJH pore size distribution. Oxidized catalysts have achieved high Pd dispersions with Pd nanoparticle sizes of a few nanometers as can be seen in the STEM images of high resolution in Figure S5. Table S1 shows the conversion and the hydrogenation capacity of the hybrid materials used as supports without Pd. As it can be seen supports did not possess activity in these reaction conditions., This research was funded by MCIN/AEI/10.13039/501100011033 and EU “NextGenerationEU”/PRTR” through project TED2021- 131416B-I00. The authors also acknowledge Gobierno de Aragón (DGA) for the financial support to Grupo de Conversión de Combustibles (T06_20R). J L-d.l.R. acknowledges Diputación General de Aragón (DGA) for the predoctoral fellowship. DT is grateful for the Juan de la Cierva Incorporación (JdC-I) fellowship (Grant Number: IJC2020-045553-I) funded by MCIN/AEI/ 10.13039/501100011033 and by “European Union NextGenerationEU/PRTR. C.D.S is grateful for the Juan de la Cierva (JdC) fellowship (Grant Number: JDC2022-048765-I) funded by MICIU/AEI /10.13039/501100011033 and by FSE+., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

A review of indicators for the characterization of urban food systems using a socio-ecological and urban indicator framework [DATASET]

  • Zerbian, Tanya
  • Berti, Lorenzo
  • Flomesta, José
  • Moragues-Faus, Ana
  • López-García, Daniel
[EN] This dataset compiles the results of a literature review and analysis that enabled the development of an indicator framework for the characterization of urban systems from a socio-ecological and urban perspective. It is part of the project FOODTRANSITIONS - Transitions towards Global Sustainability and Food Security: Assembling Sustainable and Just Cities TED2021-129660A-I00, funded by the MCIN/AEI/10.13039/501100011033 y and the European Union under “NextGenerationEU”/PRTR. It contains 38 documents analyzed, identified through Boolean searches on Scopus and grey literature complemented by the professional experience of the authors. The selected indicators were organised and prioritised based on their frequency and relevance, allowing their subsequent validation through a Delphi process. The files include the list of reviewed documents, the analysis results in Atlas.ti, and the first iteration of the indicator framework., [ES] Este conjunto de datos recopila los resultados de una revisión bibliográfica y análisis que permitieron desarrollar un marco de indicadores para la caracterización de sistemas urbanos desde una perspectiva socio-ecológica y urbana. Es parte del proyecto de investigación "FOODTRANSITIONS - Transiciones hacia la Sostenibilidad y Seguridad alimentarias Globales: Ensamblando ciudades sostenibles y justas" con código TED2021-129660A-I00, financiado por la Agencia Estatal de Investigación con número de referencia MCIN/AEI/10.13039/501100011033 y por la Unión Europea bajo el programa “NextGenerationEU”/PRTR. Contiene 38 documentos analizados, identificados a través de búsquedas Booleanas en Scopus y literatura gris complementada con la experiencia profesional de lxs autorxs. Los indicadores seleccionados fueron organizados y priorizados en base a su frecuencia y relevancia, permitiendo su validación posterior mediante un proceso Delphi. Los archivos incluyen la lista de documentos revisados, los resultados del análisis en Atlas.ti y la primera iteración del marco de indicadores., "NextGenerationEU"/PRTR, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Literature for developing the development of the Socio-ecological Urban Food Systems (SUFOS) framework [DATASET]

  • Zerbian, Tanya
  • López-García, Daniel
  • Moragues-Faus, Ana
[EN] This dataset compiles the literature used to develop the Socio-ecological Urban Food Systems (SUFOS) framework, designed to evaluate and analyse urban systems from a socio-ecological and urban perspective. It is part of the project FOODTRANSITIONS - Transitions towards Global Sustainability and Food Security: Assembling Sustainable and Just Cities TED2021-129660A-I00, funded by the MCIN/AEI/10.13039/501100011033 y and the European Union under “NextGenerationEU”/PRTR. The available file includes a RIS-format document titled "20241111_Theoretical_Framework_FT.ris," which contains the selected bibliography for the theoretical framework., [ES] Este conjunto de datos reúne la literatura utilizada para desarrollar el marco Socio-ecológico de Sistemas Alimentarios Urbanos (SUFOS), diseñado para evaluar y analizar sistemas urbanos desde una perspectiva socio-ecológica y urbana. Es parte del proyecto de investigación "FOODTRANSITIONS - Transiciones hacia la Sostenibilidad y Seguridad alimentarias Globales: Ensamblando ciudades sostenibles y justas" con código TED2021-129660A-I00, financiado por la Agencia Estatal de Investigación con número de referencia MCIN/AEI/10.13039/501100011033 y por la Unión Europea bajo el programa “NextGenerationEU”/PRTR. El archivo disponible incluye un documento en formato RIS titulado "20241111_Theoretical_Framework_FT.ris", que contiene la bibliografía seleccionada para el marco teórico., This research is part of the project "FOODTRANSITIONS, Ecological Transitions to Sustainable Food Security: Creating Sustainable and Just Cities", code TED2021-129660A-I00, funded by the MCIN/AEI/10.13039/501100011033 and the European Union "NextGenerationEU"/PRTR, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Emission of nanoparticle aerosols from composites functionalized with Multi-Wall Carbon Nano Tubes (MWCNTs) subjected to sliding wear: the influence of matrix material

  • Husanu, Francisca
  • Vélez Molina, Juan Camilo
  • Cornelio, Jesus Antonio Carlos
  • Santa Marin, Juan Felipe
  • Toro, Alejandro
  • Castellote, Marta
  • Nevshupa, Roman
[Description of methods used for collection/generation of data] Triboemission_data, the files contains nanoparticles concentration data acquired during abrasion experiments (triboemission), using a Scanning Mobility Particle Sizer (SMPS)., [Methods for processing the data] The data was procesed using data analysis and scientific programming software., A comprehensive investigation was conducted to evaluate the impact of the matrix material on the mechanical properties, microstructure, and triboemission of nanoparticle aerosols in polymer-matrix and cement-matrix composites functionalized with multi-walled carbon nanotubes (MWCNTs). The cementitious specimens were subjected to abrasion using a 20 mm diameter alumina ceramic ball, which was pressed against the sample using a constant dead load of 2.94 N. For the polymer composites, an inverse configuration was utilized to simulate the sliding conditions of a top-of-rail friction modifier, wherein a stationary composite specimen was pressed against a rotating steel disk under a constant dead load of 10 N. The sliding velocity was maintained at 1 m/s for the cement composite, while for the polymer materials, it ranged between 3.0 and 3.5 m/s. A systematic quantitative methodology was implemented to evaluate the deposition rate, emission rate, and emissivity. For cementitious materials, characterized by more pronounced porosity compared to polymers, the pore structure was analyzed using a Dynamic Vapor Sorption (DVS) system and mercury intrusion porosimetry. Raman spectroscopic analysis, utilizing a 780 nm excitation laser wavelength, was performed on both the worn surfaces and the adjacent pristine areas. The matrix material plays a critical role in nanoparticle aerosol generation and triboemission from MWCNT-functionalized composites. In polymer-matrix composites, MWCNT incorporation reduces surface damage and promotes transfer layer formation. While MWCNT addition has no impact on triboemission kinetics, it slightly modifies the aerodynamic characteristics of aerosol particles by narrowing the range of relaxation times across particle sizes. In the cement-matrix composite, the addition of MWCNT significantly increased crystallite size, reduced surface damage, and improved wear resistance. The observed differences in triboemission behaviors can likely be attributed to the primary wear mechanisms: abrasion in the cement-matrix composite and adhesion in the polymer-matrix composite, rather than any direct mechanical or structural changes induced by the MWCNT additive., This work was supported by the Spanish National Research Council (projects COOPB20363, COOPA20495, COOPB24043), Ministry of Science, Innovation and Universities of Spain (projects PID2019-111063RB-I00 and TED2021-129950B-I00) and the National Council of Science and Technology of Mexico - CONACYT (grant 740521). The authors acknowledge the FESEM service from the MiNa Laboratory at IMN funded by Madrid’s Community Government (project S2013/ICE2822), Ministry of Science, Innovation and Universities of Spain (project CSIC13-4E-1794) and EU (FEDER, FSE)., File List: Triboemission_data.xlsx DVS_data_cement.xlsx MIP_isotherm_data.xlsx He pycnometry_data.xlsx Raman_data.xlsx, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Data for in situ modification of the magnetocrystalline anisotropy in cobalt-ferrite microcrystals

  • Mandziak, Anna
  • Prieto, J. E.
  • Dávalos, J.Z.
  • Prieto, Pilar
  • Foerster, Michael
  • Aballe, Lucía
  • de la Figuera, Juan
[Description of methods used for collection/generation of data: ] X-ray absorption spectroscopy and X-ray magnetic circular dichroism in photoemission electron microscopy., [Methods for processing the data] Intensity extracted from sequence of images at different photon energies, after manual drift correction. Vector magnetization extracted using the protocol described in https://surfmoss.iqf.csic.es/en/2013-04-02-10-34-02/manuals-howtos/90-vector-xcmd-peem-spleem, We present the in situ modification of the magnetocrystalline anisotropy of iron-rich cobalt-ferrite epitaxial islands by changing their composition. Crystalline cobalt-ferrite spinel islands have been grown by oxygen-assisted molecular beam epitaxy on a Ru(0001) single crystal. The micro-crystals are several micrometers wide with heights of tens of nanometers. Their spatially-resolved vector magnetization is mapped by x-ray magnetic circular dichroism in photoemission microscopy at the L3 absorption edges of Co and Fe. Thick islands present a closure-like magnetic domain structure with the magnetization directions predominantly aligned along the projections of the easy magnetic axes onto the (111) surface plane. Thinner islands are more affected by growth defects and present a more complex domain structure. Upon deposition of additional Fe in an oxygen background pressure, Co is found to segregate out of the spinel islands, while their Fe content increases. This produces a reduction in the magnetocrystalline anisotropy, which manifests as a reorientation of the magnetization directions towards the edges of the islands, reflecting an increased contribution of the shape anisotropy, AMADEUS PID2021-124585NB-C31, PID2021-124585NB-C32), Nanobond (TED2021-130196B-C22, TED2021-130957B-C54), PID2020-117024GB-C43, TED2021-130957B-C54., File List: - Characterization of as-grown sample - XAS PEEM Images: Fe, Co, O folders - XAS XMCD Images at 0, 60, and 120 degrees azimuthal rotation: Fe - Growth sequence of LEEM images - Characterization of modified sample - XAS PEEM Images: Fe, Co - XAS XMCD Images at 0, 60, 120 degrees azimuthal rotation: Fe, Co - Micromagnetic simulations - Input files - Auxiliary data - Calibration of counts vs. Channel plates voltage - Logbook of experiments, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Daily maximum, minimum, range and deviation of time series of pH and oxygen concentration in the water column and benthic compartment in the Spanish littoral

  • Hendriks, Iris E.
  • Iuculano, Francesca
  • Vaquer-Sunyer, Raquel
  • Mayol, Elvira
  • González-Dávila, Melchor
  • Santana-Casiano, Juana Magdalena
  • Velo, Antón
  • Padín, X. A.
  • Pérez, Fiz F.
  • Flecha, Susana
  • Ricart, Aurora M.
  • Steckbauer, Alexandra
  • Duarte, Carlos M.
[Description of methods used for collection/generation of data] Water column: Water column data were acquired at 1 m depth in the Bay of Palma, at 4 m depth in Cabrera PN and at 12 m in CanOA buoy by using a SAMI-pH (Sunburst Sensors LCC) sensors attached to a mooring line. The pH sensors were measuring pH, in the total scale (pH??), hourly, since December 2018 in the Bay of Palma and since October 2019 in Cabrera, and every three hours since March 2020 in the CanOA buoy. Monthly maintenance of the sensors including data download and surface cleaning for Palma Bay and Cabrera PN and every two-three months for Gran Canaria. Since the SAMI sensor failed due to bubbles in the tubing, the pH was calculated in the total scale (pHT) with alkalinity determined from salinity and pCO2 variables for CanOA buoy data. Data were acquired at 0.8 m depth in the Ria de Arousa using a prototype instrument called SURCOM from pH Honeywell Durafet III ISFET technology. The pH sensor was measuring pH, in the total scale (pH??), every 10-5 minutes since July 2020. Monthly maintenance and cleaning of the complete mooring was performed. Temperature and conductivity data for the Cabrera PN and Palma Bay mooring line were obtained starting October 2019 and December respectively, with a CT SBE37 (SBE37SMP-ODO-RS232 Sea-Bird Scientific ©). Additionally, dissolved oxygen (DO) data from a SBE 63(Sea-Bird Scientific ©) sensor attached to the CT in Cabrera and Palma Bay were used. Sea surface temperature and salinity data for the CanOA buoy were obtained hourly starting March 2020, with a SBE 37-SI/SIP Thermosalinometer MicroCAT sensor (Sea-Bird Scientific ©). Despite the fact that the oxygen sensor was installed on the buoy, oxygen data have not been used due to their low stability and biofouling problems. Salinity data for the Ria Arousa station was obtained starting July 2020 every 10 minutes through the INTECMAR website (http://www.intecmar.gal/Plataformas/platInfo.aspx?idEst=15001) with a CTD model SBE 37-SIP. No oxygen data was provided for this dataset. Multiparametric sensors: Multiparametric sensors data were acquired by sensors located within meadow (see 5) at a height approx. 0.20 from the sediment. As multiparametric sensors a Hydrolab HL4, Hydrolab DSX5, YSI EXO2, Eureka Manta¨, SeapHOx and SAMI-pH were used. Additionally, a custom build array was used courtesy by Dr. Tommy Moore. This array was built to monitor pH variation within a 1m3 area within marine vegetation, the custom built multi-sensor array consisted of an autonomous data logger (Datataker DT85) in a water-tight housing with 16 pre-amplified pH electrodes (Omega, PHE-1304-NB) attached by 5 m long cables, for more information see (Krause-Jensen et al. 2015). The sensors were configured in-situ in a three-dimensional array on the metal frame with 1m between each side (replica), with 4 sensors at 0.1 m from the bottom, 4 sensors at 0.2 m, 4 sensors just underneath the canopy and 4 above the canopy.Ê All pH sensors were calibrated, allowing ample time between each reading for the sensors to stabilize, using NIST buffers of pHNBS 4.0, 7.0 and 10.0. Krause-Jensen D, Duarte CM, Hendriks IE, Meire L, Blicher ME, Marbˆ N, Sejr MK. 2015. Macroalgae contribute to nested mosaics of pH variability in a subarctic fjord. Biogeosciences 12:4895-4911. Data from SURCOM-pH system were acquired by a Honeywell Durafet III sensor with custom electronics described in Velo and Padin (2022). The sensor was located at about 0.8m depth on the same wire as INTECMAR CTDs. Raw data was transmitted every 10.5 min in near-real-time to IIM servers through LoRA/SIGFOX network, where itÕs calibrated by discrete spectrophotometric samples taken by CETMAR and analysed by PEACHESEA CT service at IIM-CSIC., [Methods for processing the data] Raw data was recorded with a frequency between 5 and 30 minutes for multiparametric sensors and 60 to 180 minutes for water column data. Minimum, maximum and average values for all variables were calculated by extrapolating the averages from 24 hours of measurements starting from midnight (local time), unless specified otherwise. Ranges over 24 hours of pH and DO (where data available) were calculated as the differences between maximum and minimum values within the 24 hours period., This research was funded by the European Union Ð NextGeneration EU Ð as part of the MITECO program for the Spanish Recovery, Transformation and Resilience Plan (Recovery and Resilience Facility of the European Union established by the Regulation (EU) 2020/2094), and was entrusted to CSIC, AZTI, SOCIB, and the universities of Vigo and Cadiz. Funding for the BOATS time series: CYCLE project PID2021-123723OB-C21 ÒComplex DYnamics of CoastaL Ecosystems: Resilience to Climate Change of the Spanish Ministery of Science, innovation and Universities. Project: SAMI -Adquisici—n de sensor oceanogr‡fico de medida de pH (AAEE111/2017), Govern de les Illes Balears. Project: Servicios ecosistŽmicos; Sumideros de carbono y oxigenaci—n del agua como incentivo para conservaci—n de praderas de Posidonia oceanica (Posi-COIN), Fundaci—n BBVA. Funding for the Cortegada system comes from REDEIRA(TED2021-132188B-I00) project funded by MICIU/AEI/10.13039/501100011033 and Uni—n Europea NextGenerationEU/PRTR. Fundings for CanOA-CanBIO Project from Gobierno de Canarias and Fundaci—n Loro Parque 2019-2027. SumaEco project RTI2018-095441-BC21 Sostenibilidad de ecosistemas marinos costeros en el contexto del cambio global en el Mar Mediterr‡neoÓ. Funding for Portlligat, Delta de l'Ebre and Menorca, Sa Nitja time series came from "la Caixa" Foundation (fellowship Junior Leader LCF/BQ/PI23/11970014)Ó and project CNS2023-145492 funded by MCIN/AEI/10.13039/ 501100011033 y European Union ÒNextGenerationEUÓ/PRTR., This work contributes to the Institut de Ciències del Mar "Severo Ochoa Centre of Excellence" accreditation CEX2024-001494-S funded by AEI 10.13039/501100011033 of the Spanish Ministry of Science and Innovation., File List: H4.2_database_pH_T_Watercolumn.csv H4.2_database_pH_T_sensors.csv readme.txt, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

2D MoS2/Cu2O on 3D mesoporous silica as visible-NIR nanophotocatalysts for environmental and biomedical applications

  • Shahnazarova, Gubakhanim
  • Ramírez, Jéssica Casandra
  • Al Hoda Al Bast, Nour
  • Fraxedas, J.
  • Nogués, Carme
  • Nogués, Josep
  • Serrà, Albert
  • Sepúlveda, Borja
  • Esplandiú, María J.
[Description of methods used for collection/generation of data] - Experimental UV-VIS spectroscopy (Figure_3a.opju). Data acquired with a Cary 4000 spectrophotometer without data processing. - Experimental Photoluminescence spectroscopy (Figure_3b.opju): Data acquired with a Horiba T64000 spectrometer without data processing - Experimental Raman spectroscopy (Figure_3c.opju): Data acquired with a Horiba T64000 spectrometer without data processing - Experimental Diffraction spectroscopy (Figure_3d.opju): Data were acquired using a Malvern PANanlytical X´pert Pro MDP, without data processing. - Experimental determination of the band-gap (Figure_S3a.opju and Figure_S3b.opju): Data were acquired using UV-VIS diffuse reflectance spectroscopy (Cary 4000 spectrophotometer) in combination with Kubelka-Munk Analysis. - Experimental XPS data (Figure_4.opju and Figure S2.opju): XPS data: Data acquired with a SPECS PHOIBOS150 hemispherical analyser with a monochromatic X-ray source (1486.6 eV) operated at 300W. The overall experimental resolution, including the contribution from the hemispherical analyser (energy and angle) and the monochromatic X-ray source, is better than 0.6 eV for a pass energy of 20 eV. The reported binding energies have been determined with an error of ±0.1 eV and are referred to the Fermi level of the analyser, which is periodically determined by measuring the photoelectron energies from an atomically clean reference Au(111) sample. No correction to the measured binding energies has been applied to the spectra. - Experimental Data for photodegradation of Tetracycline (Figure_5a.opju, Figure_5b.opju, Figure_5c.opju Figure_5d.opju). The photocatalyst, either MoS2 or MoS2-Cu2O, (4 cm²), was immersed in a solution containing 5 ppm tetracycline (TC) (pH=6 and pH=8). The system was kept in the dark for 30 min to reach adsorption equilibrium. Afterward, the nanoreactors were irradiated with visible light using a warm LED (λ > 420 nm, max. 600 nm, 52 × 10⁻³ W·cm⁻²). The photoreaction progress was monitored via absorbance measurements using a Cary 4000 spectrophotometer and the Lambert-Beer law (supported files: Figure_data_support_photodegradation_TC-MoS₂_Cu₂O_pH6.opju, Figure_data_support_photodegradation_TC-MoS₂_pH8.opju, Figure_data_support_photodegradation_TC-MoS₂_pH6.opju). By observing the decay of TC absorbance over time from its initial value in presence of light, the variation in TC concentration was determined using the Lambert-Beer law, enabling the generation of the plots in Figs. 5a and 5c, as well as part of Fig. 5b. The rate constant of the photodegradation process was obtained by performing a linear fit of the plot Ln(C/C₀) vs. time using the Origin program for data processing. Additionally, the total organic content (TOC) analysis (Figure_5b.opju) was conducted using a TOC-VCSH instrument. - The experimental data corresponding to reactive oxygen species identification and photocatalyst recyclability of MoS2-Cu2O (Figure_6a.opju and Figure_6b.opju), were extracted by observing the changes of TC absorbance over time from its initial value with the spectrophotometer Cary 4000. In the case of Figure_6a, the experiments were performed in presence and in absence of ROS quenchers and in Figure_6b.opju, the same photocatalysts was re-used 10 times and evaluated its performance through the absorbance decay of TC in presence of light. - Experimental Data for photodegradation of Anatoxin (Figure_7a.opju, Figure_7b.opju, Figure_7c.opju). The MoS₂/Cu₂O photocatalyst (4 cm²) was immersed in a solution containing 20 ppm of Anatoxin-A. The system was kept in the dark for 30 min to reach adsorption equilibrium. Afterward, the nanoreactors were irradiated with visible light using a warm LED (λ > 420 nm, max. 600 nm, 52 × 10⁻³ W·cm⁻²). The anatoxin photodegradation was analyzed via high-performance liquid chromatography (HPLC) using a Waters Alliance 2795 instrument equipped with a PDA detector (Waters 2996) and a mass detector (Waters ZQ 2000). The changes of Absorbance of Anatoxin through HPLC measurements were collected in Figure_7a.opju. The degradation and kinetics evaluation was similar to the case of TC. The kinetics of the photodegradation process was obtained by performing a linear fit of the plot Ln(C/C₀) vs. time using the Origin program for data processing. Additionally, the total organic content (TOC) analysis (Figure_7b.opju) was conducted using a TOC-VCSH instrument., [Methods for processing the data] - XPS experimental data: CasaXPS software version 2.3.16 PR 1.6 - Experimental determination of the band-gap: data were processed for extracting the Kubelka-Munk function using Origin program tools. - Experimental Data for photodegradation of Tetracycline: the kinetics of the photodegradation reaction was evaluated by linear fits to the curves Ln(C/C0) vs time, using Origin software tools. - Experimental Data for photodegradation of Anatoxin-A: the HPLC measurements were smoothed with Origin program tools and the kinetics of the photodegradation reaction was evaluated by performing linear fits to the Ln(C/C0) vs time curves, also using Origin software tools., - The Ministerio de Ciencia e Innovación (MICIN). Grants DIN2021-011916, TED2021-129898B-C22, TED 2021-129898B-C21, PID 2020-116844RB-C21, PID2022-138588OB-C31, PID2022-138588OB-C32 and PID 2021-124568NB-I00 funded by NextGenerationEU and MICIU/AEI/10.13039/501100011033. - Departament de Recerca i Universitats, particularly the Departament d'Acció Climàtica, Alimentació i Agenda Rural, as well as the Fons Climàtic de la Generalitat de Catalunya (project 2023 CLIMA 00009 AGAUR) - CERCA program/Generalitat de Catalunya. - Severo Ochoa Centres of Excellence program, Grant CEX2021-001214-S (ICN2) and Maria de Maeztu Centres of Excellence program Grant CEX2023-001397-M (IMB-CNM), both funded by MCIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001397-M)., File List: Figure_3a.opju, Figure_3b.opju, Fig_4_right.opju; Fig_4_right.opju; Fig_4_inset_a_VBM.opju , Fig_4_inset_c_VBM.opju, Figure_5a.opju, Figure_5b.opju; Figure_5c.opju; Figure_5d.opju; Figure_6a.opju, Figure_6b.opju; Figure_7a.opju; Figure_7b.opju; Figure_7c.opju; Figure_S2.opju, Figure_S3a.opju; Figure_S3b.opju, Figure_data_support_photodegradtion_TC-MoS2_Cu2O_pH8.opju, Figure_data_support_photodegradtion_TC-MoS2_Cu2O_pH6.opju, Figure_data_support_photodegradtion_TC-MoS2_pH8.opju, Figure_data_support_photodegradtion_TC-MoS2_pH6.opju., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

The DeQuDy Dataset. Deciphering Qur’anic Dynamics in Spain v-1 [DATASET]

  • Guerrero Enterría, Arturo
  • Rodríguez Mediano, Fernando
  • Madrid Álvarez-Piñer, Teresa
  • Boyano Guerra, Isabel
  • Arias Torres, Juan Pablo
  • Rodríguez Iglesias, Adrián
  • Rodríguez, Laura
  • Vicente, Irene
  • Díaz, Patricia
  • Santana, Marina
  • Franco, Cristina
  • Morales, Jairo
  • Roza Candás, Pablo
Esta es la v 1 del dataset. La segunda versión puede verse en este mismo repositorio http://hdl.handle.net/10261/409397, Los datasets del proyecto DeQuDy son datos en brutos que permiten el análisis de las características codicológicas y textuales del libro sagrado musulmán en la península ibérica. Este conjunto de datos está formado por las características más relevantes de cada obra coránica. Estos datos pueden verse en relación a los datos del proyecto ERC Synergy Grant, The European Qur’an, liderado por Mercedes García-Arenal, ya que son Aquí publicamos cinco tablas. Cada una representa bloques de características de los manuscritos estudiados. Las tablas siguientes propiedades: Typology, Current location, Institution, Collection, Present shelfmark /signature, Former shelfmarks/signature, Total pages/fols, Folio measures, Material composition, Codicological unit I, Writing support, Textual composition, Textual interval, Title on the manuscipt specimen, Title position, Attributed title, Language (Main), Script Incipit, Incipit position, Explicit, Explicit position, State of preservation, Released date, Released place, Other dates, Other places, Colophon, Colophon position, General decoration, Quranic structure decoration, Quranic reading, Illustrations, Marginalia, Bibliographical references, Link to library catalogue, Descriptive card, Type of relationship, Bookbinding type, Origin of the bookbinding, Bookbinding measures, Covering material Claps, Covering decoration, Writing support colour Watermark, Watermark identification, Catchwords, Presence of numeration, Numeration system, Origin of the numeration, Writing area measures, Number columns, Number of lines, Hands, Position, Text calligraphic style, Text vocalisation, Text ductus colour, Text vowels colour, Text alif elongation (madd colour), Text sukun colour, Text tashid colour, Text wasla colour, Text hamza colour, Headings calligraphic style, Headings vocalisation, Headings ductus colour, Headings vowels colour, Headings alif elongation colour, Headings sukun colour, Headings tashdid colour, Headings hamza colour, Colophon calligraphic style, Colophon vocalisation, Colophon ductus colour, Colophon vowels colour, Colophon alif elongation madd colour, Colophon sukun colour, Colophon tashdid colour, Decorations, Decoration position, Decoration colours, Illustrations, Illustration position, Marginalia, About the text, Hands of marginalia, Location, Position, Released date, Released place, Language, Script, Calligraphic style, Decoration Colour, Writing baseline orientation, Transcription, About the use and transmission of the specimen, Hands of marginalia, Location, Position, Date, Place, Language, Script, Calligraphic style, Decoration Colour, Writing baseline orientation, Transcription, Initial formula, Fol., 1 ayat division, Numbered, 1 ayat markers, 1 ayat calligraphic style, 1 ayat colour, 5 ayats division, 5 ayats markers, 5 ayats calligraphic style, 5 ayats colour, 10 ayats division, 10 ayats markers, 10 ayats calligraphic style, 10 ayats colour, Ayat al-arsh (throne) mark, Ayat al-arsh marker, Ayat al-arsh calligraphic style, Ayat al-arsh colours, Other ayats marks, Ayat number, Other ayats marker, Other ayats mark calligraphic style, Other ayats mark colour, Recitation marks, Recitation marks colour, Surah headings decoration, Surah headings deco colour, Surah headings deco remarks, HIZB location, HIZB decoration, HIZB decoration calligraphic style, HIZB decoration colours, Hizb subdivision location, Hizb subdivision deco, Hizb subdivision calligraphic, Hizb subdivision colour, 30 YUZ location, 30 YUZ decoration no-tipo, 30 YUZ decoration calligraphic, 30 YUZ decoration colours, 27 YUZ location , 27 YUZ decoration, 27 YUZ decoration calligraphic 27 YUZ decoration colours, Others divisions location, Others division decoration, Others deco calligraphic style, Others deco colours, SAYDA location, SAYDA decoration SAYDA deco calligrapic style, SAYDA deco colours, [EN] The project “Deciphering Qur’anic Dynamics in Spain" (DeQuDy) is a technological development proposal whose objective is the creation, analysis and management of the data extracted from the cataloguing, description and analysis of the more than two hundred manuscripts that can be considered as the Qur’anic corpus of the Iberian Peninsula. The processing and management of these data will be developed as a behavioural propagation model of information regarding the transmission of the Qur’an in the Iberian Peninsula, [ES] Deciphering Qur’anic Dynamics in Spain (DeQuDy) es una propuesta de desarrollo tecnológico cuyo objetivo es la creación, análisis y gestión de los datos extraídos de la catalogación, descripción y análisis de los más de doscientos manuscritos que pueden considerarse como el corpus coránico de la Península Ibérica. El tratamiento y gestión de estos datos se desarrollará como un modelo de propagación de la información relativa a la transmisión del Corán en la Península Ibérica., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Enhanced magnetoelastic stress in disordered iron-gallium alloy thin films revealed by direct measurement [Dataset]

  • Begué Gracia, Adrián
  • Proietti, M. G.
  • Arnaudas, José I.
  • Ciria, Miguel
[Description of methods used for collection/generation of data] RHEED images (files starting with Fig1b) were collected using a digital camera UK1117m equipped with a Sony ICX415AL sensor. The pixel type is gray with a pixel width of 8 bits and a variable exposure time and gain was used. Film thickness was obtained with a Discover D8 diffractometer with Cu Ka1 radiation (files starting with Fig1c). Bragg-Bentano scans were conducted with a Rigaku X-ray diffraction at Cu Ka radiation. (files starting with Fig1d). Composition was determined using energy-dispersive X-ray spectroscopy (EDX) using a INSPECT-F50 SEM (https://lma.unizar.es/sem-inspect/) and Wavelength Dispersive Spectroscopy (WDS) in an electron probe micro-analyzer (EPMA) instrument (JXA-iHP200F at the Universidad of Zaragoza). Synchrotron X-ray diffraction measurements were conducted at the BM25 beamline of the ESRF synchrotron at room temperature. A monochromatic beam with a wavelength of 0.7 Å was used. (files starting with Fig2). The reference grid is obtained using the MgO reflections of the monocrystalline substrate used to grow the films. Several non-collinear reflections are requested to calculate the matrix elements. Synchrotron XAS measurements were conducted at the Fe and Ga K-edges at beamline I18 of the Diamond UK’s National Light Source at beamline I18 of the Diamond UK’s National Light Source. Magnetization measurements were obtained using nanoMOKE3 magnetometer using laser beam with p-polarization and red (650 nm wavelength) light. High-field lineal correction is applied. Cantilever beam measurements. The magnetoelastic stress was obtained using a cantilever beam method. The sample is clamped by one end, and a constant magnetic field of 100 mT is rotated. The magnetic field is generated by a homemade dipole mounted on a motorized rotatory stage(Standa 8MR190-90-4247). Several turns are performed to correct drifts and other errors. The capacitor is built with the sample that covers a second smaller electrode. The capacitance is measured using an Andeen Hagerling 2500A capacitance bridge at 1kHz. The difference in capacitance with the magnetic field along the beam and forming 90 degrees is used to obtain the magnetoelastic stress. That value is multiplied by the factor indicated in the Appendix. Files starting with Fig6 include the capacitance recollected, Cap, the capacitance with a correction (using a 4-degree polynomial) to eliminate drift, deltaC, the magnetoelastic stress, ME. and the angular position, angle, starting with H along the beam length., [Methods for processing the data] XAS data. The experimental spectra were fitted by theoretical EXAFS signals calculated by ab initio theoretical phase and amplitudes generated for a cluster of 78 atoms with a radius of 6.1 Å-1, by the TKAtoms code. The central absorber was a Ga or Fe atom with only one kind of Ga (Fe) scatterer. The alloying FeGa effect was obtained by combining the pure Ga-Fe(Ga) and Fe-Fe(Ga)systems at the Ga and Fe K-edge, respectively. The 8.01 Feff code generated the theoretical phase-shifts and amplitudes taking into account beam polarization. The ATHENA and ARTEMIS packages were used for extraction and best-fit procedure of the EXAFS spectra. The best-fit analysis for the two polarizations was performed simultaneously in q-space, in the range 2 - 11 Å-1, by Fourier Filtering of the first peak contribution of the FT spectra that is due to the first and second coordination shells. The contributions of next neighbor (NN) and next-nearest-neighbor (NNN) atoms are merged into a single FT peak due to the proximity of the interatomic distances values (2.48 Å and 2.87 Å respectively in pure bcc Fe). The best-fit parameters were the origin of the photoelectron energy E0, the Ga population in NN and NNN environments, the interatomic distances of first and second coordination shells, and the Debye-Waller factors. The FDMNES code is used to perform \textit{ab initio} simulations of the XANES spectra., The large magnetostriction in FeGa alloys is relevant for manifold applications, but for thin films, it can play a prominent role in controlling the strength of the magnetic anisotropy. Bulk samples show values depending on the extensive preparation procedure compendium, which is limited in its temperature range for high-quality thin-film synthesis. Here, we present a study of the magnetoelastic coupling coefficients B1 and B2 in epitaxial FeGa thin films below 50 nm deposited on the MgO(001) surface at 150 ºC by the cantilever method. Series of films with 22, 28, and 33 at. % Ga do not show thickness-dependent variations for B1 and B2, but -B1 for the 22 at. % Ga composition is 10 MPa, roughly 2 times the bulk value and smaller than the bulk-like value of -B1=12.1 MPa obtained for a film with 17 at. % Ga. This enhancement is correlated with the A2 crystal structure for the film rather than the coexistence with D03 or other ordered nanometric precipitates proposed for bulk samples. Synchrotron diffraction excludes the formation of long-range L60, or D03 precipitates in samples with (001)A2 peaks at concentrations around 25 at. % Ga, which implies partial chemical disorder. The analysis of extended x-ray absorption fine structure measurements points to a D03 local order with a residual number of Ga-Ga pairs. Considering that the substrate quenches the movable strain in the A2 phase described in dual-phase structures, our results point to the important role of the electronic structure of the iron atoms modified by the presence of Ga in the alloy. This effect enlarges B1 in films with the A2 phase, stabilized using epitaxial growth., This work was funded by MICIU/AEI/10.13039/501100011033, ERDF/UE, and NextGenerationEU/PRTR (PID2021-124734OB-C21, CEX2023-001286-S, TED2021-131064B-I00), Gobierno de Aragón (E12-23R) and Ministry of Universities and the European Union-Next Generation for the Margarita Salas fellowship., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., File List: Fig1b_33_13[100].png Fig1b_33_13[110].png Fig1b_17_48[110].png Fig1b_17-48[100].png Fig1b_MgO_[110].png Fig1b_MgO_[100].png Fig1c28_11.cvs Fig1c28_20.cvs Fig1c28_41.cvs Fig1d33_17.cvs Fig1d28_41.cvs Fig1d21_19.cvs Fig2b_l1.cvs Fig2b_l05.cvs Fig2b_l0.cvs Fig2c_l1.cvs Fig2c_l05.cvs Fig2c_l0.cvs Fig3a_21_10par.cvs Fig3a_21_10perp.cvs Fig3a_28_11par.cvs Fig3a_28_11perp.cvs Fig3a_33_13par.cvs Fig3a_33_13perp.cvs Fig3b_21_10par.cvs Fig3b_21_10perp.cvs Fig3b_28_11par.cvs Fig3b_28_11perp.cvs Fig3b_33_13par.cvs Fig3b_33_13perp.cvs Fig3c_33_13parData.cvs Fig3c_33_13parFit.cvs Fig3c_33_13perpData.cvs Fig3c_33_13perpFit.cvs Fig4a_22_10.cvs Fig4a_22_33.cvs Fig4a_28_41.cvs Fig4a_33_13.cvs Fig4a_33_25.cvs Fig4b_22_12.cvs Fig4b_B2.cvs Fig4b_D03.cvs Fig4c_22_12.cvs Fig4c_B2.cvs Fig4c_D03.cvs Fig5aFe100.cvs Fig5aFe110.cvs Fig5b21_19_100.cvs Fig5b21_19_110.cvs Fig6_B1_22_10.cvs Fig6_B1_22_19.cvs Fig6_B1_22_33.cvs Fig6_B1_28_11.cvs Fig6_B1_28_20.cvs Fig6_B1_28_31.cvs Fig6_B1_33_13.cvs Fig6_B1_33_25.cvs Fig6_B1_33_36.cvs Fig6_B2_22_10.cvs Fig6_B2_22_19.cvs Fig6_B2_22_33.cvs Fig6_B2_28_11.cvs Fig6_B2_28_20.cvs Fig6_B2_28_31.cvs Fig6_B2_33_13.cvs Fig6_B2_33_25.cvs Fig6_B2_33_36.cvs Fig6d.cvs, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary information for High-energy milling of iron ore into an efficient catalyst for cracking of methane and biogas [Dataset]

  • López de los Ríos, Jaime
  • Torres Gamarra, Daniel
  • Di Stasi, Christian
  • Ayala Cortés, Alejandro
  • Suelves Laiglesia, Isabel
  • Pinilla Ibarz, José Luis
Under a Creative Commons BY-NC-ND 4.0 license., Fig. A.1 Diffractograms of iron ores obtained after reduction in thermobalance in H2 at 900 ºC. Fig. A.2. Evolution of the acummulated carbon thourghout the CCM, a) WHSV = 2 NL gcat -1 h-1 and 900 ºC, b) WHSV = 2 NL gcat -1 h-1.Fig. A.3 N2 adsorption isotherm of the hybrid materials produced at the CCM at 900 ºC and a) 2 NL h-1 gcat -1, b) 4 NL h-1 gcat -1. Fig. A.4 SEM images with direct electrons (top) and backscattered electrons (bottom) of the hybrid materials produced at the CCM at 900 ºC and 2 NL h-1 gcat -1. Fig. A.5 TEM images of the hybrid materials produced at the CCM at 900 ºC and 2 NL h-1 gcat -1. Fig. A.6 TEM images of the hybrid materials produced at the CCM at 900 ºC and 4 NL h-1 gcat -1. Fig. A.7 TEM images of the hybrid materials produced at the CCM at 800, 850 and 900 ºC and 2 NL h-1 gcat -1. Fig. A.8. Evolution of the concentrations of the outlet gases in the CCB at 900 ºC and 2 NL h-1 gcat -1 with a) WT-ore, b) SM-ore, c) MM-ore and d) LM-ore. Fig. A.9. TEM images of the solid product at the CCB at 900 ºC and 2 NL h-1 gcat., This research was funded by MCIN/AEI/10.13039/501100011033 and EU “NextGenerationEU”/PRTR” through project TED2021-131416B-I00 and by MCIN/AEI/10.13039/501100011033 and FEDER, UE through project PID2023-147514OB-I00. The authors also acknowledge Gobierno de Aragón (DGA) for the financial support to Grupo de Conversión de Combustibles (T06_20R). Jaime López-De Los Ríos acknowledges Diputación General de Aragón (DGA) for the predoctoral fellowship (CPT_01_23). C.D.S is grateful for the Juan de la Cierva (JdC) fellowship (Grant Number: JDC2022-048765-I) funded by MICIU/AEI/10.13039/501100011033 and by FSE+. DT is grateful for the Juan de la Cierva Incorporación (JdC-I) fellowship (Grant Number: IJC2020–045553-I) funded by MCIN/AEI/10.13039/501100011033 and by “European Union NextGenerationEU/PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Database with measurements of reflectance and transmittance of glazing systems and materials for energy efficiency evaluation in building

  • Álvarez-Pérez, Jorge Omar
  • Santafé, Pablo
  • Ferrero, Alejandro
[Description of methods used for collection/generation of data] The measurements were obtained using a goniophotometer. A Xe lamp was used as the light source. A Köhler system located in the beam path allows for the regulation of both the intensity and the size of the light spot on the sample. The samples were positioned in the required geometries using a robotic arm located at the center of the system. This is ring-shaped and enables two spectroradiometers (VIS and NIR) to rotate around the sample at the necessary collection angles. The incident beam is not obstructed by the spectroradiometers due to the periscopic arrangement of the equipment, which allows for measurements in retroreflection., [Methods for processing the data] Matlab., This database contains data of reflectance and transmittance measurements of glazing systems and materials. The evaluted spectral ranges are [380 nm - 780 nm] and [900 nm -2500 nm]. In the case of transparent glazing samples, the reflectance and transmittance coeffcients are given for different angles of incidence (0º - 70º), whereas for diffuse glazing samples the bidirectional reflectance distribution function (BRDF) and the bidirectional transmitted distribution function (BTDF) are the relevant quantities given in the database., This database is part of the project TED2021-129661B-C21, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRT, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Lack of AtMC1 catalytic activity triggers autoimmunity dependent on NLR stability

  • Salguero-Linares, José Manuel
  • Armengot, Laia
  • Ayet, Joel
  • Ruiz-Solani, Nerea
  • Saile, Svenja C.
  • Salas-Gómez, Marta
  • Denolf, Lode
  • Navarrete, Fernando
  • Krumbach, Jenna
  • Kaiser, Markus
  • Stael, Simon
  • Breusegem, Frank Van
  • Gevaert, Kris
  • Kaschani, Farnusch
  • Petersen, Morten
  • El Kasmi, Farid
  • Valls, Marc
  • Coll, Núria S.
  • Fernandez, Esperanza
Plants utilize cell surface-localized pattern recognition receptors (PRRs) and intracellular nucleotide-binding leucine-rich repeat (NLR) receptors to detect non-self and elicit robust immune responses. During plant development and especially during aging, fine-tuning the homeostasis of these receptors is critical to prevent their hyperactivation. Here, we show that Arabidopsis plants lacking metacaspase 1 (AtMC1) display autoimmunity dependent on immune signalling components downstream of NLR and PRR activation. Overexpression of catalytically inactive AtMC1 in an atmc1 background triggers severe autoimmunity partially dependent on the same immune signalling components. Although individual mutations in NLRs, PRRs or other immune-related components that interact with catalytically inactive AtMC1 do not rescue the autoimmune phenotype, overexpression of SNIPER1, a master regulator of NLR homeostasis, fully attenuates the phenotype, inferring that a broad defect in NLR turnover may underlie the severe autoimmunity observed. As opposed to Wt AtMC1 which exhibits a nucleocytoplasmic localization, catalytically inactive AtMC1 localizes to puncta structures that are degraded through autophagy. We infer that the phenotypes observed in plants overexpressing catalytically inactive AtMC1 may represent an additive phenotype to the relatively milder autoimmunity observed in atmc1 mutants. Altogether and considering previous evidence on the proteostatic functions of AtMC1, we speculate that Wt AtMC1 may either directly or indirectly control NLR protein levels as plants approach adulthood, thus preventing autoimmunity., Ministerio de Ciencia e Innovación (MCIN): PID2022-136922NB-I00,PID2019-108595RB-I00,TED2021-131457B-I00 BES-2017-080210 PREP2022-000557 CEX2019-000902-S FJC2021-046667 MCIN/AEI/10.13039/501100011033; Ministerio de Ciencia, Innovación y Universidades (MCIU): FPU19/03778 EC | H2020 | PRIORITY 'Excellent science' | H2020 Marie Skłodowska-Curie Actions (MSCA): 945043 rePLANT-GA101081581 GA#101068121 GA#945043; Deutsche Forschungsgemeinschaft (DFG): CRC1101 D09 Reinhard-Frank Stiftung: helperless plant Centres de Recerca de Catalunya (CERCA): No grant number, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Enhanced magnetoelastic stress in disordered iron-gallium alloy thin films revealed by direct measurement

  • Begué Gracia, Adrián
  • Proietti, M. G.
  • Arnaudas, José I.
  • Ciria, Miguel
The large magnetostriction in FeGa alloys is relevant for manifold applications, but for thin films, it can play a prominent role in controlling the strength of the magnetic anisotropy. Bulk samples show values depending on the extensive preparation procedure compendium, which is limited in its temperature range for high-quality thin-film synthesis. Here, we present a study of the magnetoelastic coupling coefficients B1 and B2 in epitaxial FeGa thin films below 50 nm deposited on the MgO(001) surface at 150 ºC by the cantilever method. Series of films with 22, 28, and 33 at. % Ga do not show thickness-dependent variations for B1 and B2, but -B1 for the 22 at. % Ga composition is 10 MPa, roughly 2 times the bulk value and smaller than the bulk-like value of -B1=12.1 MPa obtained for a film with 17 at. % Ga. This enhancement is correlated with the A2 crystal structure for the film rather than the coexistence with D03 or other ordered nanometric precipitates proposed for bulk samples. Synchrotron diffraction excludes the formation of long-range L60, or D03 precipitates in samples with (001)A2 peaks at concentrations around 25 at. % Ga, which implies partial chemical disorder. The analysis of extended x-ray absorption fine structure measurements points to a D03 local order with a residual number of Ga-Ga pairs. Considering that the substrate quenches the movable strain in the A2 phase described in dual-phase structures, our results point to the important role of the electronic structure of the iron atoms modified by the presence of Ga in the alloy. This effect enlarges B1 in films with the A2 phase, stabilized using epitaxial growth., We thanks grant TED2021-131064B-I00 funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR, grant PID2021-124734OB-C21 funded by MCIN /AEI /10.13039/501100011033 and by “ERDF A way of making Europe” and grant CEX2023-001286-S funded by MICIU/AEI /10.13039/501100011033 and Gobierno de Aragón, Spain (grant E12-23R). A. B. would like to acknowledge the funding received from the Ministry of Universities and the European Union-Next Generation for the Margarita Salas fellowship . We are grateful to the staff of beamline I18 at Diamond UK’s National Synchrotron Light source and BM25 Spain Beamline at ESRF for their strong support in performing the experiments. Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza. Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node Laboratorio de Microscopias Avanzadas (LMA) at Universidad de Zaragoza., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

DATASET A low-coordinate platinum(0)-germylene for E-H bond activation and catalytic hydrodehalogenation

  • Bajo, Sonia
  • Soto, Enrique
  • Fernández-Buenestado, Marta
  • López-Serrano, Joaquín
  • Campos, Jesús
This file contains all reviewer reports in order by version, followed by all author rebuttals in order by version. Version 0: Reviewer comments: Reviewer #1 (Remarks to the Author) The manuscript entitled “An Exceedingly Low-Coordinate Platinum(0)-Germylene for E–H Bond Activation and Catalytic Hydrodehalogenation” by Jesús Campos describes the E‒H bond activation facilitated by Platinum(0)-Germylene cooperation, resulting in the formation of Pt(II)-germyl compounds. The Pt/Ge complex 1 reacts with alkynes to form 1,2platinogermacyclobutadiene compounds (compound 7), which also serve as efficient catalysts in hydrodehalogenation reactions. The structural symmetry of these compounds has been analyzed using NMR, X-ray single crystal data, and computational studies. Overall, the chemistry is well-executed and well-described, with some improvements suggested below. I am pleased to support its acceptance in this journal. General Comments: Compound 1 has successfully catalyzed the dehalogenation reaction. Can the stoichiometric reaction product of 1 with aliphatic or aromatic halides be obtained? This might help in understanding the reaction mechanism better. The authors have investigated the catalytic potential of compound 1 in the hydrodehalogenation of aliphatic and aromatic halides. What about the hydrodefluorination of organic fluorides? All yields of reactions are reported in spectroscopic form and were performed at room temperature. Can the authors attempt to separate and purify the products at low temperature to confirm the actual isolation yield of each reaction? Page 4, Line 9: “consistent with reactivity studies …” needs correction. Page 6, Figure 4: States 5 equivalents of methanol. Supplementary Information S7, Compound 4: States 2 equivalents and 1 equivalent of methanol. The authors need further confirmation and correction. Page 5, Line 10: “[ArDippGeCl]2 reacts with water, methanol, and ammonia to yield mixtures of products.” The structural information of these mixtures is not provided. Page 8, Line 12: The structural formula “κ1 interaction” of compound 3 is not consistent with “the π-interaction with the flanking aryl ring is now closer to a κ2-coordination”. Page 12, Figure 9: Change “RCCH” on the arrow to “2 RCCH”. Reviewer #2 (Remarks to the Author) The manuscript by Campos and colleagues describes an intriguing Pt germylene species (1) which was prepared by substitution of tBu-ethylene with a germylene source (a germylene dimer). Unfortunately, complex 1 is thermally unstable, and accordingly, was not isolated as an analytically pure material, nor was it characterized by X-ray crystallography. When generated in situ, complex 1 reacts with bonds in various small molecules (including the N-H of NH3). The authors refer to this as "cooperative activation", though addition of bonds across metal-main group multiple bonds is well known and usually not described as cooperative activation. Related work by Tilley (e.g. Organometallics 2009 5082) was not referenced. Complex 1 also inserts alkynes into the Pt=Ge bond. While these complexes and related reaction chemistry are interesting, they are not particularly novel. The highest impact of this work, in my opinion, is the catalytic dehydrohalogenation, particularly the fact that alkyl substrates were used. In addition, chlorides worked reasonably well. The manuscript would benefit from additional computational work to elucidate the mechanism of the catalytic cycle. If that were included, I would support publication of this manuscript in Nature Chemistry. One final comment: the authors refer to complex 1 as "exceedingly low coordinate". Given that no X-ray crystal structure was obtained, and the aryl groups on both the P and Gemight interact with the metal centre, this is perhaps somewhat of an over-reach. Why not simply call it "low coordinate"? Reviewer #3 (Remarks to the Author) This manuscript by Campos and coworkers deals with a Pt(0)-germylene complex. It is coordinately unsaturated at both Pt and Ge, which makes it proned to E-H bond activation. H2, H2O, MeOH and NH3 are shown to readily add across the formal Pt=Ge linkage. Catalytic hydrodehalogenation is also reported, with both alkyl and aryl substrates. This is a very important and original piece of work. Small molecule activation by transition metal / main group compounds has several precedents and is no longer a big surprise, but applying such systems to synthetically useful catalytic transformations is rare and remarkable. All the more so that the Pt(0)-germylene complex works with alkyl and aryl substrates with H2 as reductant. The manuscript is pleasant to read, the work is of high scientific and technic quality. All compounds have been fully characterized. I for sure recommend publication of this work in Nature Communications but there is one point that requires consideration and should be addressed before publication. It is the link between the stoechiometric studies of E-H bond activation and the catalytic hydrodehalogenation. I agree with the authors that « a thorough mechanistic picture lies out of the scope of the present contribution », but the relevance of the cooperative activation of H2 by the Pt(0)-germylene complex to the catalytic transformation should be substantiated. All the more so that the authors point some observations suggesting the involvement of radical pathways. It would also be nice to extend the stoechiometric studies to the RX substrates as some of them may compete with H2 upon reaction with the Pt(0)-germylene complex. Minor corrections : - Some phrasings are inappropriate and require polishing. For example on page 4 : « … suggesting that this atom partly retains its Z-type character ». - I also recommend careful proofreading. I noticed several typos. Version 1: Reviewer comments: Reviewer #1 (Remarks to the Author) The authors have systematically introduced the E‒H bond activation and catalytic hydrodehalogenation applications of lowcoordinate platinum(0)-germylene, elucidating the catalytic reaction mechanism through detailed experimental and theoretical calculations. The authors have also addressed my questions regarding this work, and the manuscript has been thoroughly revised and is now suitable for acceptance. Reviewer #2 (Remarks to the Author) After carefully scrutinizing the revised version of the manuscript by Campos and colleagues, as well as the responses to all reviewer comments, I fully endorse its publication in Nature Communications. Every single comment was addressed in depth and a great deal of additional work was performed. The result is substantial improvement to an already excellent contribution. Reviewer #3 (Remarks to the Author) The authors have carefully revised their manuscript. They have taken into account and convincingly addressed all the comments raised by the reviewers. In my opinion, the paper can be published in Nature Communications as is., Pairing transition metals and heavier tetrylenes (Si, Ge, Sn, Pb) holds great potential for cooperative bond activation and catalysis. In this work, we investigate the reactivity of a low-coordinate Pt(0)/Ge(II) system that emerges from the reaction between the monoligated platinum(0) precursor [(PMe2ArDipp2)Pt(olefin)] with germylene dimer [ArDipp2GeCl]2 (where ArDipp2 = C6H3-2,6-(C6H3-2,6-iPr2)2). The resulting complex reveals ability for cooperative bond activation. Stoichiometric reactions with dihydrogen, water, methanol, ammonia and alkynes unveil the formation of Pt(II)-germyl compounds, characterized by distinct isomeric forms, whose flexibility derives from the particularly low-coordination. We explore its catalytic potential in the hydrodehalogenation of aliphatic, aromatic and main-group halides under dihydrogen atmosphere using both thermal and photochemical conditions, demonstrating promising conversions even for more challenging alkyl chlorides. Pairing transition metals and heavier tetrylenes holds potential for cooperative bond activation. Here, the authors investigate the reactivity of a low-coordinate Pt(0)/Ge(II) system that emerges from the reaction between a monoligated platinum(0) precursor with a germylene dimer and explore its application as a hydrodehalogenation catalyst., This work has been supported by the European Research Council (ERC Starting Grant, CoopCat, 756575; JC), the Spanish Ministry of Science and Innovation (PID2022-139782NB-I00; JC, and TED2021-132225B-I00; JC) and Junta de Andalucia (P18-FR-4688; JC). We also acknowledge the European Commission for a MSCA fellowship (101023461; SB), and the use of computational resources of the CSIRC of the Universidad de Granada -cluster Albaicín-. We thank Lamin Keita for his assistance on ligand and precursor synthesis., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Metabarcoding-based characterization of soil nematode communities to assess soil health in viticulture [Dataset]

  • Blanco-Pérez, Rubén
  • Toro, María de
  • Álvarez-Ortega, Sergio
  • Pou, Alicia
  • Sánchez-Moreno, Sara
  • Campos-Herrera, Raquel
Samples were taen in the field and processed in the laboratory following details described in the publication, The MCIN/AEI/10.13039/501100011033 and the “European Unión NextGenerationEU/PRTR supported the grant TED2021-129169B-I00. This study was also financed by the Instituto de Estudios Riojanos (IER, Government of La Rioja, ref. Resolución 17/2019) and the Consejería de Agricultura, Ganaderia, Mundo Rural, Territiorio y Población (Government of La Rioja, ref. P.R.-06-22). The MCIN/AEI/10.13039/501100011033 and the “European Unión NextGenerationEU/PRTR supported RBP Juan de la Cierva contract ref. JDC2022-048978-I, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

DATASET Lipid turnover through lipophagy in the newly identified extremophilic green microalga Chlamydomonas urium

  • Pérez-Pérez, María Esther
  • Mallén-Ponce, Manuel J.
  • Odriozola-Gil, Yosu
  • Salas, Joaquín J.
  • Martínez-Force, Enrique
  • Pérez-Pulido, Antonio J.
  • Crespo, José L.
  • Rubio, Alejandro
File List: Fig. S1 Exposure of Chlamydomonas urium and Chlamydomonas reinhardtii cells to low pH, toxic concentrations of heavy metals or organic carbon. Fig. S2 Growth rate of Chlamydomonas urium and Chlamydomonas reinhardtii cells grown in HSM liquid medium at pH 7 under normal light or high light. Fig. S3 Total chlorophyll levels of Chlamydomonas urium and Chlamydomonas reinhardtii. Fig. S4 Photosynthetic parameters of Chlamydomonas urium and Chlamydomonas reinhardtii cells. Fig. S5 ATG8 proteins from Chlamydomonas urium and Chlamydomonas reinhardtii. Fig. S6 Electron microscopy images of Chlamydomonas urium cells subjected to nitrogen starvation in the presence of ConcA. Fig. S7 Comparative metabolic analysis of Chlamydomonas urium and Chlamydomonas reinhardtii cells grown in HSM medium under normal conditions. Fig. S8 Oxygen production and relative electron transport rate in Chlamydomonas urium and Chlamydomonas reinhardtii in the absence or presence of ConcA. Table S1 List of species used in the study. Table S2 Genes involved in lipid degradation in Chlamydomonas reinhardtii and Chlamydomonas urium. Table S3 Statistical analysis from main figures., Autophagy is a central degradative pathway highly conserved among eukaryotes, includingmicroalgae, which remains unexplored in extremophilic organisms. In this study, we describedand characterized autophagy in the newly identified extremophilic green microalga Chlamy-domonas urium, which was isolated from an acidic environment. The nuclear genome of C. urium was sequenced, assembled and annotated in order toidentify autophagy-related genes. Transmission electron microscopy, immunoblotting, meta-bolomic and photosynthetic analyses were performed to investigate autophagy in this extre-mophilic microalga. The analysis of the C. urium genome revealed the conservation of core autophagy-relatedgenes. We investigated the role of autophagy in C. urium by blocking autophagic flux withthe vacuolar ATPase inhibitor concanamycin A. Our results indicated that inhibition of autop-hagic flux in this microalga resulted in a pronounced accumulation of triacylglycerols and lipiddroplets (LDs). Metabolomic and photosynthetic analyses indicated that C. urium cells withimpaired vacuolar function maintained an active metabolism. Such effects were not observedin the neutrophilic microalga Chlamydomonas reinhardtii. Inhibition of autophagic flux in C. urium uncovered an active recycling of LDs through lipo-phagy, a selective autophagy pathway for lipid turnover. This study provided the metabolicbasis by which extremophilic algae are able to catabolize lipids in the vacuole, This work was supported in part by the Ministerio de Ciencia, Innovación y Universidades (grants PID2021-123500NB-I00 to JLC, PID2019-110080GB-I00 to MEPP and TED2021-130912B-I00 to JLC and MEPP), CSIC (grant 2023AEP102 to MEPP) and Junta de Andalucía (grant P20_00057 to JLC), a Juan de la Cierva postdoctoral contract (FJC2021-048000-I) to MJMP, and a predoctoral contract (PRE2022-102797) to YOG., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Drone-based RGB, thermal, and multispectral datasets for application with MosaicSeadron

  • Román, Alejandro
  • Heredia, Sergio
  • Windle, Anna E.
  • Tovar-Sánchez, Antonio
  • Navarro, Gabriel
[Description of methods used for collection/generation of data] Three different drones were used for data acquisition, equipped with different sensors: i) The quadcopter DJI Matrice 300 (M300) is equipped with both the MicaSense RedEdge-MX dual multispectral sensor and the DJI Zenmuse H20T sensor. The multispectral sensor has ten bands that capture information from the visible to near-infrared (NIR) range, with wavelengths centered, respectively, at the blue (444 and 475 nm), green (531 and 560 nm), red (650 and 668 nm), red edge (705, 717 and 740 nm), and NIR (842 nm) regions. In addition, it includes a Downwelling Light Sensor (DLS2) to account for changes in solar angle and illumination during flight. A calibration panel (RP04-1924106-0B) was used before each UAV flight for radiometric calibration. The DJI Zenmuse H20T sensor includes a 20-megapixel (MP) optical RGB Zoom sensor with a complementary metal oxide semiconductor (CMOS) 1/2.7″, a 12 MP optical RGB wide angle sensor with a CMOS 1/2.3″, and an Uncooled VOx Microbolometer thermal sensor with a focal length of 13.5 mm, capturing 640 × 512 pixel image resolution. The M300 has on-board real-time kinematic (RTK) technology to enhance georeferencing accuracy, achieving 1 cm ± 1 ppm (horizontal) and 1.5 cm ± 1 ppm (vertical) accuracies when RTK is enabled and fixed. ii) The DJI Phantom 4 Pro (P4P) is equipped with the MicaSense RedEdge-MX sensor, including five bands on the electromagnetic spectrum, namely, in the blue (475 nm), green (560 nm), red (668 nm), red edge (717 nm), and NIR (842 nm) regions. This sensor also includes the DLS and is mounted using a 10° 3D-printed mount, resulting in a direct nadir viewing angle while in flight. The P4P does not have RTK technology on board, so the vertical and horizontal georeferencing accuracies are ±0.1 m and ±0.3 m (with vision positioning) and ±0.5 m and ±1.5 m (with GPS positioning), respectively. iii) The DJI Mavic 2 Enterprise Advanced (M2EA) is equipped with an extra RTK module to ensure accurate georeferencing. It features a 48 MP, 1/2″ CMOS optical RGB sensor and a 640 × 512 px Uncooled VOx Microbolometer thermal sensor. This RTK quadcopter achieves a horizontal accuracy of 1 cm ± 1 ppm and a vertical accuracy of 1.5 cm ± 1 ppm, without the requirement of ground control points (GCPs)., [Environmental/experimental conditions] Data acquisition was attempted to be carried out during spring tide and clear sky weather conditions. In the vast majority of study areas, this was possible except in the Antarctic locations where cloudiness and wind conditions prevailed during the sampling days. In the flights conducted over the San Pedro River and Estepona, strong winds also hindered the execution of the intended UAV surveys. Flight missions were planned using the Universal Ground Control System (UgCS) client mission planning software (SPH Engineering, Riga, Latvia, v.4.2.156) and Pix4D Capture Pro software (Pix4D SA, Lausanne, Switzerland, v.4.12), taking into account different overlapping settings, altitudes, and flight orientations, which are displayed in Table 1 along with the dates of drone survey execution. To support RTK measurements and improve georeferencing accuracies, a Reach RS2+ RTK GNSS antenna (EMLID) was set as the base station for all drone surveys. Spanish (Spanish Agency for Aviation Safety, AESA), European (European Agency for Aviation Safety, EASA), and U.S. (Federal Aviation Administration, FAA) civil aviation regulations were followed during all UAV operations., This repository contains the original RAW data captured by a drone equipped with RGB, thermal, and multispectral sensors, which were used to obtain the results published in Román et al. 2024 (DOI: https://doi.org/10.3390/rs16020290). The repository also aims to make drone‑acquired datasets from various regions of the world - namely Antarctica, southern Europe, and the United States - readily available for running the pioneering georeferencing and mosaicking algorithm "MosaicSeadron" (https://github.com/SeadroneICMAN/MosaicSeadron/). This open‑source Python algorithm overcomes the main limitations of traditional photogrammetric techniques when working with drones over water surfaces. Indeed, it represents a significant advance in monitoring marine and coastal processes by introducing an innovative, efficient, and accurate workflow that improves local‑scale remote observation of aquatic environments., This research has been funded by the European Union’s Horizon 2020 research and innovation programme REWRITE project (grant number 101081357), PY20-00244 (SAT4ALGAE) PROJECT and TURISDRON (PROYEXCEL 00052) project by Junta de Andalucía, RTI2018-098048B-100 (PiMetAn), PID2021-1257830B-100 (DICHOSO), and EQC2018-004275-P and TED2021-129230B-I00 funded by MCIN/AEI/10.13039/501100011033 and by ‘ERDF A way of making Europe’. The research that led to this publication was conducted with the support of a US–Spain Fulbright grant and of the Junta de Andalucía. A.R. is supported by grant FPU19/04557 funded by Ministry of Universities of the Spanish Government. This research has been financially supported by the agreement between the Spanish Ministry for Ecological Transition and Demographic Challenge and CSIC, funded by the European Union-Next Generation Program to contribute to the MSFD. This work represents a contribution to CSIC Thematic Interdisciplinary Platform PTI TELEDETECT., File List: 6 folders: Dataset 1 - San Pedro river_20230621; Dataset 2 - San Pedro river_20230724; Dataset 3 - Estepona_20230128; Dataset 4 - Guadalquivir river_20230322; Dataset 5 - Whalers Bay_20220130; Dataset 6 - Fumarole Bay_20220201, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Thermoelectric performance boost by chemical order in epitaxial L21 (100) and (110) oriented undoped Fe2VAl thin films: an experimental and theoretical study [Dataset]

  • Domínguez-Vázquez, José María
  • Caballero-Calero, Olga
  • Lohani, Ketan
  • Plata, José J.
  • Marquez, Antonio M.
  • Manzano, Cristina V.
  • Tenaguillo Arrese, Miguel Ángel
  • Ohta, Hiromichi
  • Cebollada, Alfonso
  • Conca, André
  • Martín-González, Marisol
According to the open access nature and its exceptions in the datasets regulation of the Call ERC-2021-ADG, and having reflected the following statements in the Data Management Plan of such project (ID: 101052603; POWERbyU; ERC-2021-ADG), the authors of the data associated with this publication state the following: The datasets associated with this publication will be available upon request, due to these datasets being subjected to Intellectual Property Restrictions; requests by externals for the use of these datasets will be approved by the project coordinator. Please, contact Prof. Marisol Martín-González: marisol.martin@csic.es This modus operandi will remain in effect, at least until the end of the project., This Dataset refers to the following study which demonstrates the direct correlation between the presence of the L21 ordered phase and the significant enhancement in the thermoelectric performance of Fe2VAl thin films deposited on MgO and Al2O3 substrates at temperatures varying between room temperature and 950 °C. The researchers employ both experimental techniques and computational modeling to analyze the influence of crystallographic orientation and deposition temperature on the thermoelectric properties, including the Seebeck coefficient, electrical conductivity, and thermal conductivity. Their findings indicate that the presence of the L21 phase significantly enhances the power factor (PF) and figure of merit (zT), surpassing previously reported values for both bulk and thin film forms of Fe2VAl, achieving a PF of 480 μW m−1 K−2 and a zT of 0.025., The authors would also like to acknowledge the service from the MiNa Laboratory at IMN, and its funding from EU (FEDER, FSE), MCIN/AEI/10.13039/501100011033 and Next Generation EU/PRTR (EQC2021-006944-P). This work was funded by projects THERMHEUS grant TED2021-131746B-I00 funded by MICIU/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” and ERC Adv. POWERbyU grant agreements ID: 101052603 funded by European Research Council (ERC), and grant PID2022-138063OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by FEDER, UE. We gratefully acknowledge the computer resources at Lusitania (Cenits-COMPUTAEX), Red Española de Supercomputación, RES (QHS-2023-1-0028) and Albaicín (Centro de Servicios de Informática y Redes de Comunicaciones – CSIRC, Universidad de Granada)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Discrete choice data on tourists’ preferences for boat trips to an offshore wind farm in north-western Spain, Datos de elección discreta sobre preferencias de turistas para viajes en barco a un parque eólico marino en el noroeste de España

  • Cerdá, Emilio
  • López, Xiral
  • Quiroga, Sonia
  • Soliño, Mario
1 file.-- Data from a discrete choice experiment collected through face-to-face surveys at the city of Vigo (Pontevedra, Spain), Discrete choice data for 402 individuals, 6 choices by individual, 3 alternatives each choice card, Grant TED2021-130267B-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union and the European Union NextGenerationEU/PRTR, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Ground composition data for the southernmost area of Lérida province, NE Spain [Dataset]

  • Herrero Isern, Juan
More than 3000 physical, chemical and morphological data of soils described between December 1980 and July 1981 in the southernmost part of the province of Lérida, NE Spain, are collected in this dataset. The soils are located between the coordinates 41.62°N 1.06°E, and 41.28°N 0.34°E. Most of the soil samples were taken in backhoe dug pits where their profiles were described. The data —presented here in an Excel spreadsheet— come from the book by J. Porta & R. Julià (eds.) published in 1982 with I.S.B.N. 84-5008771-6. Moreover, two chapters were scanned from this book and included in this dataset as “Description.pdf” and “FormationClassification.pdf”. The author did not proofread the galley proofs of these chapters. The data contained in “Description.pdf” were manually transcribed in 2025 to the excel file “ProfilesLerida04clas.xlsx”. Care must be taken with the location coordinates given the non-correction of the galley proofs and because the resources available to us 45 years ago were quite rudimentary. The excel file “ProfilesLerida04clas.xlsx” incorporates the correction of obvious errors in the coordinates and their transformation to ETRS89 from the notations used in 1980-81. The help of Ms. Rosa Gómez-Báguena with the coordinates is greatly appreciated. We also present the file "1989 XVI Reun.SECS Lérida suelos secano", a report including discussion and data about the studied soils., This research was possible thanks to the grant PID2021-127170OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, and the grant TED2021-130303B-I00 funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGeneration EU/PRTR”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset for the paper "Bravo, T., Maury, C. Broadband sound attenuation and absorption by duct silencers based on the acoustic black hole effect: Simulations and experiments. Journal of Sound and Vibration 561, 117825 (2023). http://doi.org/10.1016/j.jsv.2023.117825"

  • Bravo, Teresa
  • Maury, Cédric
[Description of methods used for collection/generation of data] The analytical simulated results have been done using Matlab simulations. The numerical simulations have been performed using Finite Element Method in Comsol Multiphysics. The schemas and photos have been based on the printed prototype muffler and the experimental set-up. The experimental data have been adquired in a standing wave tube test rig onto which was mounted the silencer. The measurement method uses four microphones and two-sources to estimate, in plane wave regime, the scattering matrix of the test partition from which the reflected, transmitted and dissipated powers are calculated. A complete description is provided in the corresponding publication., Each data file corresponds to the figure with the same name by order of appearance in the publication: Bravo, T., Maury, C. Broadband sound attenuation and absorption by duct silencers based on the acoustic black hole effect: Simulations and experiments. Journal of Sound and Vibration 561, 117825 (2023). http://doi.org/10.1016/j.jsv.2023.117825, This dataset corresponds to the figures included in the article: Bravo, T., Maury, C. Broadband sound attenuation and absorption by duct silencers based on the acoustic black hole effect: Simulations and experiments. Journal of Sound and Vibration 561, 117825 (2023). http://doi.org/10.1016/j.jsv.2023.117825, This work has been funded by the project TED2021-130103B-I00, MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR. It has also received support from the French government under the France 2030 investment plan, as part of the Initiative d'Excellence d'Aix-Marseille Université - A*MIDEX (AMX-19-IET-010), FIG1.tiff, FIG2.csv, FIG3.csv, FIG4.csv, FIG5.csv, FIG6.csv, FIG7.csv, FIG8.csv, FIG9.tiff, FIG10.csv, FIG11.tiff, FIG12.csv, FIG13.csv, FIG14.csv, FIG15.csv, FIG16.csv, FIG17.csv,README_DATA_JSV2023.txt, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Data for Growth of MnWO4 Nanowires on W(110) by High- Temperature Oxygen-Assisted Molecular Beam Epitaxy

  • Fornal, Kalina
  • Gutiérrez-Cuesta, Clara
  • Campo, Ángel Adolfo del
  • Mandziak, Anna
  • Nita, Pawel
  • Prieto, J. E.
  • Marco, J.F.
  • de la Figuera, Juan
[Description of methods used for collection/generation of data] X-ray absorption spectroscopy and X-ray magnetic circular dichroism in photoemission electron microscopy, low-energy electron microscopy, Raman spectroscopy, Optical microscopy, Atomic Force Microscopy, [Methods for processing the data] Intensity extracted from areas of interest from sequence of images at different photon energies, or different start voltage., Dataset for the growth of synthetic hübnerite (MnWO4) by high-temperature oxygen-assisted molecular beam epitaxy on W(110). The hübnerite nanowires have widths of hundreds of nanometers, heights of tens of nanometers and lengths in the range of millimeters. The growth was followed in real time by low-energy electron microscopy (LEEM). The nanowires are characterized in situ by low-energy electron microscopy, x-ray absorption and x-ray photoelectron spectroscopy in photoemission microscopy, as well as ex situ by atomic force microscopy, optical microscopy and Raman spectroscopy. Hübnerite can be grown on W(110) by dosing only manganese in a molecular oxygen environment, likely due to the formation of highly mobile WOx species with diffusion lengths of the order of hundreds of micrometers. The dataset comprises the original LEEM data for the growth movie, the PEEM data for the Mn, the O XAS spectra and the W XPS spectra (all of them reduced in size by half), and the Raman spectrum and the AFM image., AMADEUS (AEI PID2021-124585NB-C31), Nanobond (AEI TED2021-130957B-C54), BEETHOVEN (EU 101129912), Polish (1/SOL/2021/2)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset for the paper "Bravo, T., Maury, C. Converging rainbow trapping silencers for broadband sound dissipation in a low-speed ducted flow. Journal of Sound and Vibration 589, 118524 (2024). https://doi.org/10.1016/j.jsv.2024.118524"

  • Bravo, Teresa
  • Maury, Cédric
The analytical simulated results have been done using Matlab simulations. The numerical simulations have been performed using Finite Element Method in Comsol Multiphysics. The schemas and photos have been based on the printed prototype muffler and the experimental set-up. The experimental data have been adquired in a aero-acoustic test bench. The metasilencer has been located between two rigid duct sections, 1m long, with outlet cross-sectional area 0.075 m x 0.075 m. The two-source and eight-microphone method has been used to determine the scattering matrix of the silencer in the general case of grazing flow. A complete description is provided in the corresponding publication., Each data file corresponds to the figure with the same name by order of appearance in the publication: Bravo, T., Maury, C. Converging rainbow trapping silencers for broadband sound dissipation in a low-speed ducted flow. Journal of Sound and Vibration 589, 118524 (2024). https://doi.org/10.1016/j.jsv.2024.118524, This dataset corresponds to the figures included in the article: "Bravo, T., Maury, C. Converging rainbow trapping silencers for broadband sound dissipation in a low-speed ducted flow. Journal of Sound and Vibration 589, 118524 (2024). https://doi.org/10.1016/j.jsv.2024.118524", This work is part of the project TED2021-130103B-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union “Next Generation EU”/PRTR, and the project PID2022-139414OB-I00, funded by MCIN/AEI/10.13039/501100011033/ and by"ERDF A way of making Europe". It has also received support from the French government under the France 2030 investment plan, as part of the Initiative d’Excellence d’Aix-Marseille Universit´e - A*MIDEX (AMX-22-RE-AB-157)., FIG1.tiff, FIG2.csv, FIG3.csv, FIG4.csv, FIG5.csv, FIG6.csv, FIG7.csv, FIG8.csv, FIG9.csv, FIG10.csv, FIG11.tiff, FIG12.csv, FIG13.tiff, FIG14a.csv,FIG14b.csv,FIG14c.csv,FIGB1.csv, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Data for Magnetic Circular Dichroism at the Oxygen K edge in Microcrystals of Spinels Grown on Ru(0001) (arxiv 2505.24439)

  • Mandziak, Anna
  • Sosa, V.
  • Nita, Pawel
  • Martín-García, Laura
  • Prieto, J. E.
  • Foerster, Michael
  • Niño, Miguel Ángel
  • Aballe, Lucía
  • Granados-Miralles, Cecilia
  • Quesada, Adrián
  • Tejera-Centeno, César
  • Gallego, Silvia
  • de la Figuera, Juan
[Description of methods used for collection/generation of data] X-ray absorption spectroscopy and X-ray magnetic circular dichroism in photoemission electron microscopy., We have measured the circular magnetic dichroism in the x-ray absorption at the K-edge of oxygen in microcrystals of different spinel oxides. The microcrystals are islands of micrometric size and nanometric thickness, grown on Ru(0001) substrates using high-temperature oxygen-assisted molecular beam epitaxy. The domains observed in the oxygen K-edge dichroism have the same distribution and orientation as those observed in x-ray magnetic circular dichroism at the L3 edge of the octahedral cations. Integrating the area from a single domain, x-ray magnetic circular dichroic spectra of oxygen were measured and, by the application of the K-edge sum rule, non vanishing orbital magnetic moments aligned with the octahedral cations were found. The work is described in arXiv:2505.24439. The dataset comprises the original raw PEEM data for the XMCD images and the XAS spectra in both the cobalt ferrite and the nickel ferrite. The PEEM images have only been reduced in size by half in each direction to reduce the size (and saved in a single TIFF file for each measurement)., AMADEUS (PID2021-124585NB-C31, PID2021-124585NB-C33), Nanobond (TED2021-130196B-C22, TED2021-130957B-C54)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Experimental dataset for https://github.com/1aviervargas/Semantic_Segmentation_Picker

  • Vargas, Javier
  • Martín-Benito, Jaime
  • Modrego, Andrea
Ministerio de Ciencia, Innovación y Universidades: Cryo-electron microscopy: from the resolution revolution to the new drug design revolution PID2022-137548OB-I00; Ministerio de Ciencia, Innovación y Universidades: Digital image processing in cryomicroscopy: breaking down barriers (DigitalBreak) TED2021-132748B-I00, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Designing conservation networks to ensure connectivity in a changing climate: application to Spanish forests

  • Goicolea, Teresa
[Aim:] Assess the potential effects of climate change on different forest habitats, and outline a climate-wise conservation network to sustain forest connectivity under current and future climates., [Location:] Mainland Spain., [Time period:] Current and future (2071-2100)., [Major taxa studied:] Forest species associated with different vegetation types and dispersal abilities., [Methods:] We fitted a Random Forest model to predict the distribution of six vegetation types under current and four future climate scenarios. We then assessed forest availability and connectivity for each climate scenario and vegetation type. To define the conservation network we identified the key habitat patches and corridors for dynamic connectivity using multi-temporal habitat availability indices. Finally, we analyzed how much of this conservation network is expected to change due to climate shifts and how this aligns with existing protected areas., [Results:] Forests across all vegetation types exhibited substantial northward, eastward, and upward shifts. Forests adapted to cold or wet conditions (e.g., deciduous, mountain conifers, and high-mountain vegetation) declined in area and connectivity. Warm- and dry-adapted forests (e.g., sclerophyllous, subsclerophyllous, and hyperxerophilous vegetation) increased their ranges and connectivity. The increase in subsclerophyllous area tripled in connectivity gain, whereas other vegetation increased area and connectivity at similar rates (differences below 15%). 53% of the proposed conservation network shifted vegetation types. Current protected areas covered 45% of the conservation patches across Spain but less than 7% within the deciduous vegetation type., [Main conclusions:] Projected shifts highlight the need for dynamic connectivity analyses to guide effective conservation under changing climates. Forest types exhibited distinct trends, underscoring the need for tailored strategies for each type. The proposed conservation network provides guidance for a proactive enhancement of forest species resilience, and serve as reference for other countries with similar conservation targets, such as the international EU Restoration Law and Biodiversity Strategy., Ministerio de Ciencia e Innovación (Agencia Estatal de Investigación) and FEDER Una manera de hacer Europa: PID2021-124187NB-I00 Ministerio de Ciencia e Innovación (Agencia Estatal de Investigación) and Unión Europea NextGenerationEU/PRTR: TED2021-129589B-I00, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Hydrological, physicochemical, and microbial characterization of the Mar Menor lagoon and its groundwater sources - General dataset [Dataset]

  • Rodríguez-Puig, Júlia
  • Romano Gude, Daniel
  • Rodellas, Valentí
  • Ruiz-González, Clara
  • Bravo, Andrea G.
  • García-Orellana, Jordi
  • Alorda-Montiel, Irene
  • Diego-Feliu, Marc
  • Alorda-Kleinglass, Aaron
  • Dordal Soriano, Júlia
  • Gilabert, Javier
  • Manzano Arellano, Marisol
  • Lavergne, Céline
  • Montero Curiel, María
  • Romera-Castillo, Cristina
First release of the Mar Menor SGD general dataset. This dataset contains detailed information on groundwater and lagoon water collected in the Mar Menor coastal lagoon (SE Spain) from March 2021 to May 2022. This dataset contains detailed information on stream water, groundwater, lagoon water, and soils collected in the Mar Menor coastal lagoon (SE Spain) from March 2021 to May 2022. The data includes physicochemical parameters (e.g., temperature, salinity, pH, dissolved oxygen), radionuclide activities (e.g., Ra-223, Ra-224, Ra-226, Ra-228), dissolved nutrient concentrations (NO3-, NO2-, NH4+, Si(OH)4, PO43-, TDN), dissolved organic carbon concentrations (DOC), microbial parameters (e.g., total bacterial abundance, HNA fraction, 3H-leucine incorporation rates), and mercury chemical species (total dissolved mercury and dissolved methylmercury). This dataset was used to estimate the magnitude of different SGD pathways, including pollutant fluxes to the lagoon, and interpret their impact on microbial communities, J. Rodriguez-Puig acknowledges financial support from FPU grant FPU20/01369, and the institutional support of the María de Maeztu Programme (CEX2019-000940-M) for Units of Excellence of the Spanish Ministry of Science and Innovation. M. Montero-Curiel acknowledges the funding from the FPI grant (PRE2020-096147), with the institutional support of the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S-20-5). D. Romano-Gude acknowledges the funding from the FPI grant (PRE2020-095468), with the institutional support of the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S-20-2). [...] This work acknowledges the Severo Ochoa Centre of Excellence accreditation (CEX2024-001494-S) funded by AEI 10.13039/501100011033, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

BEETHOVEN CSIC experimental data SFO recycling [Dataset]

  • Berja, Alba
  • Casaleiz, Daniel
  • Granados-Miralles, Cecilia
  • Kosmač, Karla
  • Saje, Boris
  • Frangež, Tina
  • Dvoršak, Slavko
  • Samardžija, Zoran
  • Podmiljšak, Benjamin
  • Fernández Lozano, José Francisco
  • Quesada, Adrián
The demand for hexaferrite (BaFe12O19/SrFe12O19) permanent magnets is expected to rise in the next 5–10 years due to their potential as a sustainable alternative to rare-earth magnets. Currently, less than 1 % of recycling of permanent magnets occurs worldwide. This study presents a successful method for recycling strontium ferrite magnets from end-of-life household appliances, fabricating recycled bonded magnets as a first step to implement a circular economy in the value chain. This industrially scalable method optimizes comminution and annealing of recovered ceramic magnets, yielding powders with particle sizes below 2 µm. Thermal treatment at 900–1000 °C recovers competitive magnetic properties. A pilot batch of recycled hexaferrite bonded magnets, produced via injection moulding, exhibited excellent mechanical and magnetic properties, with coercivity Hcj of 190.1 kA/m, remanent polarization Jr of 234.3 mT, and maximum energy product (BH)max of 10.4 kJ/m³, comparable to commercial ferrite bonded magnets., This work has been supported by the JECS Trust, Fund Contract no. 2022319, the INSPIRES project funded by the EIT RawMaterials under grant number 20090, BEETHOVEN project funded by the European Comission under grant agreement 101129912, grants TED2021–130957B-C51, CNS2022–135876 and RYC2021–031181-I funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR, and grants PID2021–124585NB-C33 and PID2023–151036OA-I00 funded by MICIU/AEI/10.13039/ 501100011033 and by ERDF, EU. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Education and Culture Executive Agency (EACEA). Neither the European Union nor EACEA can be held responsible for them., - Powder X-ray diffraction (PXRD) 1D-diffraction patterns in *.dat format. 2 tab-separated columns: 2theta angle (degree), Diffracted Intensity (arbitrary units) - Vibrating sample magnetometry (VSM) Hysteresis loops: Magnetic moment as a function of a variable applied field in *.dat format. 2 tab-separated columns: Magnetic Field (Oe), Moment (emu). - Hysteresisgraph Demagnetization curves in *.dat format. 2 tab-separated columns: H[kA/m], J[T]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Light-induced adaptive laboratory evolution enhances bioactive aromatic amino acid-derived compound profile in a wine strain of Saccharomyces cerevisiae [DATASET]

  • Bisquert, Ricardo
  • Guillén, Alba
  • Quintas, Guillermo
  • Guillamón, José Manuel
Four CSV files that constitute complementary data to the manuscript "Light-induced adaptive laboratory evolution enhances bioactive aromatic amino acid-derived compound profile in a wine strain of Saccharomyces cerevisiae" (Bisquert et al .), Yeast metabolism plays a key role in the synthesis of bioactive compounds in fermented foods and beverages. Among these, aromatic amino acid-derived compounds (AADCs) such as tryptophol, 2-phenylethanol, and tyrosol, along with indolic compounds like melatonin, serotonin, and 3-indoleacetic acid, contribute to the quality and stability of wine. This study aimed to enhance the production of these compounds in Saccharomyces cerevisiae through adaptive laboratory evolution (ALE) using white light as a selective pressure. The hypothesis was that oxidative stress induced by light would stimulate non-enzymatic antioxidant responses, increasing the synthesis of indolic compounds. A wine yeast strain was subjected to ALE, and the evolved strain was analyzed for genotypic, phenotypic, and metabolomic changes. Results showed significant genomic and transcriptomic differences, leading to a marked increase in AADC production. These findings demonstrate the potential of white light as a selective pressure and highlight this approach as a promising non-GMO strategy for improving yeast strains in the food industry., This work was funded by MCIN/AEI/10.13039/501100011033, grant number PID2022-142748OB-I00 and TED2021-132386B-I00, and by Generalitat Valenciana, grant number AGROALNEXT/2022/049. RB and AG thank their respective BES-2017-079640 and PRE2020-093597 grants funded by MCIN/AEI. Authors acknowledge the award of the Spanish government MCIN/AEI to the IATA-CSIC as Center of Excellence (CEX2021-001189-S/ MICIU/AEI / 10.13039/501100011033)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset for A low-cost optofluidic threaded microreactor (OTM) for water treatment

  • Fernández Pérez, Amparo
  • Marbán Calzón, Gregorio
The financial support for this research work was provided by Principado de Asturias (IDI/2021/000096) and MCIN/AEI/10.13039/501100011033 [PID2020-113558RB-C44 and European Union NextGeneration EU/PRTR (TED2021-129234B-I00)]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset Soil Biogeochemical and Microbial Data from Organic Farming Systems with Compost and Cover Vegetation

  • Gil Martínez, Marta
  • Madejón, Paula
  • Madejón, Engracia
  • Lozano de Sosa, Laura
Dataset of artícle : "Compost and vegetation cover drive soil fertility, microbial activity, and community in organic farming soils", Funded by project from the Ministerio de Ciencia e Innovación of Spain Agencia especial de investigación (AEI) and European Union NextGenerationEU/ PRTR under the project “Biocompost and cover crops: linking soil health, circular economy and cost effectiveness in ecological mediterranean orchards” (Bioecover) TED2021-130964B-I00, No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset for the paper "Enhancing Calcium-Looping Materials for Thermochemical Energy Storage: Alkali Chloride Modification for Improved Cycling Stability and Moisture Resistance"

  • Robles-Solano, Esther
  • Perejón, Antonio
  • Pérez-Maqueda, Luis A.
  • Sánchez-Jiménez, Pedro E.
This study explores the impact of alkali chloride additives on the performance and durability of CaO-based materials obtained from natural limestone for thermochemical energy storage through the calcium-looping process. The investigation was carried out using CaCO3 of different particle sizes derived from natural limestone as the base material. An alkali mixture, extracted from biomass ash and predominantly composed of KCl, was used as additive. The composite materials were prepared in varying proportions (1 and 5 wt%) and tested in thermal cycling experiments that simulate energy storage operation conditions, in order to assess their multicycle reactivity and storage behavior. Key experimental findings demonstrate that a limited alkali addition (1 wt%) slightly decreases conversion during the fast carbonation stage but significantly enhances multicycle stability, achieving conversion values up to 0.40 after 20 cycles for fine particles (60-100 µm) compared to 0.25-0.30 for unmodified materials. This improvement is attributed to accelerated diffusion-controlled carbonation. Furthermore, the use of alkaline salts has a positive effect on inter-cycle storage stability by preventing moisture-induced degradation, as the salts inhibit hydroxylation of CaO under humid conditions, which would otherwise reduce the stored energy. Thus, it has been observed that alkali modification extends the time to full conversion to Ca(OH)2 by up to 700% under 32% relative humidity conditions. The optimized composition (1 wt% alkali) effectively balances conversion efficiency, cyclic and storage stability, making this approach particularly viable for industrial energy storage applications such as concentrated solar power systems where materials may undergo extended storage periods between operational cycles., MCIN/AEI/10.13039/501100011033 and European Union Next Generation EU/PRTR: TED2021-131839B-C22; MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe: PID2022-140815OB-C22, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset for TED2021 AEI Project: Green chemistry for a membrane-free electrolitic flow battery for large scale energy storage (GreenFloBat)

  • Khabazian, Siavash
  • Liu, Cheng
  • Gao, Yan
  • Vallejo, Victor
  • Martin Diaconescu, Vlad
  • Stievano, Lorenzo
  • Tonti, Dino
Fecha de finalización del proyecto: 2025-08-31 This dataset contains the experimental and computational data generated during the TED2021 project TED2021-132707B-I00 Metodología detallada: ¿Cómo se generaron los datos, incluidos los equipos o el software utilizado, el protocolo experimental, etc? For XAS measurements, the synchrotron radiation emitted by a wiggler source was monochromatized using a double-crystal Si(311) monochromator with an appropriate beam size of 1 mm × 1 mm. Higher harmonics were rejected by choosing the proper angles and coatings for the collimating and focusing mirrors. The absorption data of the Mn and Zn references were collected in transmission mode using three ionization chambers for simultaneous measurements of the sample and the Mn foil used as a reference, within an incoming energy resolution below 0.3 eV. For XES experiments, the incoming beam was monochromatized using a double-crystal Si(311) monochromator and the emission data were collected in back scattering geometry with a beam size of 0.2 mm × 0.1 mm, (parallel to the linear polarization vector of the incoming X-ray beam) by means of the CLEAR emission spectrometer. The spectrometer was based on a dynamically bent diced Si(333) crystal analyzer (bending radius R = 1 m) and a 1D position-sensitive Mythen detector. The emission spectra were acquired by exciting the sample well above the Mn K edge and detecting the emitted Mn Kβ1,3 emission lines, with a total energy resolution of approximately 0.6 eV. Repeated X-ray absorption and emission scans were measured to ensure the reproducibility of the spectra and obtain a high signal-to-noise ratio. The measurements were performed at ambient temperature under vacuum conditions. Operando XAS was operated with a similar configuration to the operando cell in Fig. S1, but the cathode was moved from the center to partly expose the separator, as shown in Fig. 2c, where both Zn and Mn K-edge XAS data were acquired synchronously in both the electrolyte and electrode, respectively. The cell was filled with ca. 60 μL 0.5 M ZnSO4 and 0.2 M MnSO4 electrolyte and operated under a C/10 rate and with a low voltage cut-off of 0.9 V vs. Zn/Zn2+, after being maintained for one hour at Open Circle Voltage (OCV) state. The duration of data acquisition was approximately 30 minutes per batch, including a total of 10 spectra (Zn and Mn spectra in both the electrolyte and cathode), along with a short resting time. In situ STXM. 2 μL of a 20 ppm (w/w) suspension of α-MnO2 in H2O was dropped onto a MEMS chip (HUMMINGBIRD). The chip was then mounted on its flow-cell microscope holder, introduced into the STXM chamber, and connected to a BioLogic SP200 potentiostat. The electrolyte (1 M ZnSO4 and 0.2 M MnSO4) was injected from a 1 mL syringe at a speed of 0.2 mL per hour. During cycling, an energy of 1010 eV near the Zn L-edge was selected to acquire the STXM images to provide an optimal image contrast. Galvanostatic cycling tests were conducted using a LANHE M340A cycler. Remaining electrochemical tests were conducted using a BioLogic VSP potentiostat. X-ray Diffraction (XRD) patterns were collected by a Siemens D-5000 diffractometer of Cu K𝛼 radiation. Operando XRD data were acquired by a Bruker D8 Advance A25 diffractometer in a Debye-Scherrer geometry equipped with a Johansson monochromator of the Mo K𝛼 radiation and its standard transmission diffraction collection mode. Scanning Electron Microscopy (SEM) was performed using a FEI Quanta 200 FEG-ESEM equipment (10 – 15 kV). X-Ray Photoelectron Spectroscopy (XPS) data were recorded by a SPECS EA10P hemispherical analyzer with a monochromatic Al K𝛼 radiation. (Scanning) Transmission Electron Microscopy ((S)TEM) and Transmission Electron Microscopy-Energy Dispersive X-Ray (TEM–EDX) and Scanning Transmission Electron Microscopy–Electron Energy Loss Spectroscopy (STEM–EELS) were acquired with a Super-X EDX spectrometer and a Gatan Continuum K3 EELS spectrometer, or a ThermoFisher Scientific Spectra 300. Spectra were collected at a beam energy of 200 keV with an energy step of 0.9 eV. Mn K-edge X-ray Absorption Spectroscopy (XAS) was carried out at the CLÆSS beamline of ALBA CELLS synchrotron, Spain. Ex situ energy-resolved full-field soft X-ray Transmission Microscopy (TXM) was performed at the MISTRAL beamline of ALBA CELLS Synchrotron, Spain.84 In situ Scanning X-ray Transmission Microscopy (STXM) was carried out at the DEMETER beamline of SOLARIS Synchrotron, Poland. The STXM images were obtained at the energy of ca. 1010 eV to optimize the compromise between contrast and radiation damage. XPS fitting was carried out with CasaXPS for Mn 2p3/2, K 2p, and O 1s lines following the procedure described in our previous report.56 For XAS techniques, the Zn and Mn mole evolutions in the electrode and electrolyte of the operando cell were calculated from the X-ray Absorption Near Edge Structure (XANES) edge jumps with a self-built model detailed in the Supporting Information. The EXAFS portion of the operando XAS data was analyzed using ATHENA and ARTEMIS. For the fitting of the pre-edge, the baseline was modeled with the Larch package. The MnO2 and Mn2O3 reference spectra were taken as models of Mn(IV) and Mn(III) components, respectively, using the Hyperspy package. For XES measurements, a linear background was subtracted in SpectroChemPy,93 considering 0.5 – 2 eV of the low- and high-energy tails. Subsequently, each spectrum was normalized to its area. The Integrated Absolute Difference (IAD) with respect to a low-spin reference method was utilized to extract the local magnetic moment quantitatively. The ex situ TXM data were processed following previous work. In situ STXM images and Mn spectra were obtained in aXis2000.99 (S)TEM-related dataset (HRTEM, STEM–HAADF images, TEM–EDX, and STEM–EELS) were treated with eXSpy., Affordable Zn and safe aqueous electrolytes make Zn/MnO₂ batteries promising, but common test conditions hide reversibility issues. Recent work shows Mn(IV) can reduce to Mn(II) in flow cells, and Zn/MnO₂ can be deposited during charging from Zn²⁺/Mn²⁺ solutions, achieving high energy density without ion-selective membranes—cutting cost and risk. The mechanism is complex and poorly understood, involving intercalation, precipitation, and dissolution driven by pH, plus side reactions like corrosion and Zn dendrites. We propose advanced techniques (e.g., X-ray absorption) to identify chemical species and compare main vs. undesired processes under varying electrode designs, additives, and conditions. This will guide development of sustainable, low-cost, scalable Zn-MnO₂ flow batteries., Proyecto TED2021-132707B-I00 financiado por AEI/MCIN, - /data/raw: Original unprocessed data - /data/processed: Derived results - /code: Scripts used for analysis and for simulations - /other: Supplementary files, No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

The DeQuDy Dataset. Deciphering Qur’anic Dynamics in Spain v 2 [DATASET]

  • Guerrero Enterría, Arturo
  • Rodríguez Mediano, Fernando
  • Madrid Álvarez-Piñer, Teresa
  • Boyano Guerra, Isabel
  • Arias Torres, Juan Pablo
  • Rodríguez Iglesias, Adrián
  • Rodríguez, Laura
  • Vicente, Irene
  • Díaz, Patricia
  • Santana, Marina
  • Franco, Cristina
  • Morales, Jairo
  • Roza Candás, Pablo
Esta es la v 2 del dataset The DeQuDy Dataset. Deciphering Qur’anic Dynamics in Spain. La V1 se puede ver en este mismo repositorio en http://hdl.handle.net/10261/380741, Los datasets del proyecto DeQuDy son datos en brutos que permiten el análisis de las características codicológicas y textuales del libro sagrado musulmán en la península ibérica. Este conjunto de datos está formado por las características más relevantes de cada obra coránica. Estos datos pueden verse en relación a los datos del proyecto ERC Synergy Grant, The European Qur’an, liderado por Mercedes García-Arenal, ya que son Aquí publicamos cinco tablas. Cada una representa bloques de características de los manuscritos estudiados. Las tablas siguientes propiedades: Typology, Current location, Institution, Collection, Present shelfmark /signature, Former shelfmarks/signature, Total pages/fols, Folio measures, Material composition, Codicological unit I, Writing support, Textual composition, Textual interval, Title on the manuscipt specimen, Title position, Attributed title, Language (Main), Script Incipit, Incipit position, Explicit, Explicit position, State of preservation, Released date, Released place, Other dates, Other places, Colophon, Colophon position, General decoration, Quranic structure decoration, Quranic reading, Illustrations, Marginalia, Bibliographical references, Link to library catalogue, Descriptive card, Type of relationship, Bookbinding type, Origin of the bookbinding, Bookbinding measures, Covering material Claps, Covering decoration, Writing support colour Watermark, Watermark identification, Catchwords, Presence of numeration, Numeration system, Origin of the numeration, Writing area measures, Number columns, Number of lines, Hands, Position, Text calligraphic style, Text vocalisation, Text ductus colour, Text vowels colour, Text alif elongation (madd colour), Text sukun colour, Text tashid colour, Text wasla colour, Text hamza colour, Headings calligraphic style, Headings vocalisation, Headings ductus colour, Headings vowels colour, Headings alif elongation colour, Headings sukun colour, Headings tashdid colour, Headings hamza colour, Colophon calligraphic style, Colophon vocalisation, Colophon ductus colour, Colophon vowels colour, Colophon alif elongation madd colour, Colophon sukun colour, Colophon tashdid colour, Decorations, Decoration position, Decoration colours, Illustrations, Illustration position, Marginalia, About the text, Hands of marginalia, Location, Position, Released date, Released place, Language, Script, Calligraphic style, Decoration Colour, Writing baseline orientation, Transcription, About the use and transmission of the specimen, Hands of marginalia, Location, Position, Date, Place, Language, Script, Calligraphic style, Decoration Colour, Writing baseline orientation, Transcription, Initial formula, Fol., 1 ayat division, Numbered, 1 ayat markers, 1 ayat calligraphic style, 1 ayat colour, 5 ayats division, 5 ayats markers, 5 ayats calligraphic style, 5 ayats colour, 10 ayats division, 10 ayats markers, 10 ayats calligraphic style, 10 ayats colour, Ayat al-arsh (throne) mark, Ayat al-arsh marker, Ayat al-arsh calligraphic style, Ayat al-arsh colours, Other ayats marks, Ayat number, Other ayats marker, Other ayats mark calligraphic style, Other ayats mark colour, Recitation marks, Recitation marks colour, Surah headings decoration, Surah headings deco colour, Surah headings deco remarks, HIZB location, HIZB decoration, HIZB decoration calligraphic style, HIZB decoration colours, Hizb subdivision location, Hizb subdivision deco, Hizb subdivision calligraphic, Hizb subdivision colour, 30 YUZ location, 30 YUZ decoration no-tipo, 30 YUZ decoration calligraphic, 30 YUZ decoration colours, 27 YUZ location , 27 YUZ decoration, 27 YUZ decoration calligraphic 27 YUZ decoration colours, Others divisions location, Others division decoration, Others deco calligraphic style, Others deco colours, SAYDA location, SAYDA decoration SAYDA deco calligrapic style, SAYDA deco colours, [EN] The project “Deciphering Qur’anic Dynamics in Spain" (DeQuDy) is a technological development proposal whose objective is the creation, analysis and management of the data extracted from the cataloguing, description and analysis of the more than two hundred manuscripts that can be considered as the Qur’anic corpus of the Iberian Peninsula. The processing and management of these data will be developed as a behavioural propagation model of information regarding the transmission of the Qur’an in the Iberian Peninsula, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

IsmaSA/Iberia_NNS

  • Soto, Ismael
  • Oficialdegui, Francisco J.
  • Bedmar, Sergio
  • Capinha, César
  • Sousa, Ronaldo
  • García-Berthou, Emili
  • Muniz, Carolina Mendes
  • Oscoz, Javier
  • Cano-Barbacil, Carlos
  • Anastácio, Pedro M.
  • Angulo, Elena
  • Arnanz, Christian
  • Florencio, Margarita
  • Kouba, Antonín
  • Miranda, Rafael
  • Oliva-Paterna, Francisco J.
  • Ribeiro, Filipe
  • López-Pujol, Jordi
  • Dalmau, Meritxell
  • Pladevall, Clara
  • Porto, Miguel
  • Haubrock, Phillip J.
  • Briski, Elizabeta
[Aim] As a consequence of globalisation, biological invasions have become an increasing concern due to multifaceted ecological and socio-economic impacts on biodiversity and ecosystem services. Despite the increasing availability and accessibility of data, a comprehensive assessment of established non-native species and their distribution in the Iberian Peninsula has not been conducted so far., [Location] Iberian Peninsula, including Spain, Portugal, Andorra, and Gibraltar., [Methods] We compiled a harmonised dataset of 1273 established non-native species from multiple regional, national, and global sources. We analysed taxonomic composition, introduction pathways, and native biogeographic realms. Temporal patterns were assessed using first-record data, while spatial patterns were mapped using high-resolution occurrence data from GBIF and national databases., [Results] The majority of established non-native species are vascular plants and insects, specifically of the classes Magnoliopsida and Insecta and the families Asteraceae and Formicidae, respectively. Overall, the most common pathways of introduction were escapes from human facilities and transport-related mechanisms (contaminant and stowaway), but their importance varies among countries. Established non-native species were mostly native to the other regions within the Palearctic, followed by the Nearctic and Neotropical realms. Regarding the time of introduction, first records increased steadily until the last decades of the 20th century, when the introduction rate slowed down; yet new introductions persist. Finally, our spatial analysis identified that areas with high human population density and coastal zones recorded the highest number of established non-native species., [Main Conclusion] The Iberian Peninsula hosts a high number and diversity of established non-native species. Given the ongoing rise in cumulative introductions and the role of unintentional human-driven pathways, strengthening prevention measures is vital to reduce future invasions. However, with many non-native species already established, effective management efforts are equally crucial to curb further spread and mitigate consequent impacts, especially in areas of conservation interest., RS was supported by the Portuguese Foundation for Science and Technology (FCT) through national funds under the project MULTI-CRASH: Multi-dimensional ecological cascades triggered by an invasive species in pristine habitats (PTDC/CTA-AMB/0510/2021) (https://doi.org/10.54499/PTDC/CTA-AMB/0510/2021). FR is supported by an individual contract from FCT (CEEC/0482/2020) and by the project MEGAPREDATOR: A giant on the water: from predation pressure to population control of the European catfish (Silurus glanis) (https://doi.org/10.54499/PTDC/ASP-PES/4181/2021). EGB and CMM received financial support from the Spanish Ministry of Science, Innovation, and Universities (MICIU/AEI/ https://doi.org/10.13039/501100011033) and the European Union (NextGenerationEU/PRTR) through projects PID2019-103936GB-C21, FJC2021-047559-I, TED2021-129889B-I00, and RED2022-134338-T. CCB benefited from a postdoctoral contract Ref. JDC2023-052358-I, funded by the Spanish Ministry of Science, Innovation, and Universities, the Agencia Estatal de Investigación (MICIU/AEI/10.13039/501100011033) and the FSE+., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Shoreline position and emerged/submerged beach profiles at Castell beach (2019–2022) [Dataset]

  • Marco Peretó, Candela
  • Durán, Ruth
  • Simarro, Gonzalo
  • Guillén, Jorge
In this study, repeated topographic and bathymetric surveys were conducted to characterise shoreline position and beach morphology at Castell Beach (Catalonia, Spain) between 2019 and 2022. Six RTK-GNSS field campaigns were carried out to measure shoreline position and emerged beach topography, complemented by three echo-sounder bathymetric surveys to characterise the submerged beach. RTK-GNSS data were collected across the subaerial beach and swash zone, while single-beam and multibeam echo-sounder measurements were used to measure the shoreface. The resulting dataset includes shoreline positions and representative emerged and submerged beach profiles, which can be used to analyse coastal morphological changes. The data were used to calculate volume variations and shoreline displacements following two extreme storm events, as well as the subsequent recovery, Morphological variability on Mediterranean embayed sandy beaches is largely driven by wave storms and episodic sediment inputs from local streams during intense rainfall. While storm impacts are well documented, the combined influence of stream discharge, wave forcing and morphological response remains poorly understood. This study examines these interactions at Castell beach, one of the few non-urbanised, stream-fed embayed beaches on the northwestern Mediterranean, during two high-energy storms with heavy rainfall: December 2019 and January 2020 (Storm Gloria). Morphological changes in the subaerial and submerged beach, and stream dynamics were assessed using repeated RTK-GNSS surveys, orthophotos and echo-sounder bathymetry. Results show the stream mouth shifted along the beach (east, central or west) during heavy rainfall episodes depending on wave direction and pre-existing topography, tending toward more wave-sheltered zones. The storms induced contrasting responses: the first caused slight subaerial accretion, whereas Storm Gloria produced subaerial erosion and nearshore sediment deposition from both beach and stream sources. This material was subsequently reworked and reincorporated into the subaerial beach under calmer conditions, with full recovery by February 2022. These findings highlight the role of stream–wave interactions in sediment dynamics and the capacity of highly protected embayed beaches to adapt to extreme events, This work has been carried out in the framework of the MOLLY (PID2021-124272) and SOLDEMOR (TED2021-130321B-I00) research projects funded by the Spanish Ministry of Science, Innovation and Universities and the Catalan Government Excellent Research Groups (2021-SGR-00433). It contributes to the Severo Ochoa Centre of Excellence program through Grant CEX2024-001494-S funded by AEI 10.13039/501100011033. C. Marco-Peretó is supported by Spanish FPI grant (PRE2022-101492), With funding form the Spanish government through the "Severa Ochoa Centre of Excellence" accreditation (CEX2024-001494-S)., - readme.txt - castell_shorelineposition_ETRS89_UTM31N.txt - castell_emergedprofiles_ETRS89_UTM31N_EGM08D595.txt - castell_submergedprofiles_ETRS89_UTM31N_EGM08D595.txt, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Reproductive parameters of the European roller (Coracias garrulus)

  • Valera, Francisco
  • Václav, Radovan
  • Veiga, Jesús
  • Castaño-Vázquez, Francisco
[EN] Reproductive parameters of the European roller (Coracias garrulus) in Almería. The data are linked to the article Vaclav et al. Reproductive flexibility in a single-brooded migrant: Can the European roller (Coracias garrulus) adapt to extreme weather events? Journal of Avian Biology: in press., [ES] Parámetros reproductores de Carraca europea (Coracias garrulus) en Almería. Los datos están vinculados al artículo Vaclav et al. Reproductive flexibility in a single-brooded migrant: Can the European roller (Coracias garrulus) adapt to extreme weather events? Journal of Avian Biology: en prensa., - VEGA grant from the Ministry of Education of the Slovak Republic (No. 2/0111/24). - Projects CGL2008-00562, CGL2014-55969, PGC2018-097426-B-C22 and TED2021-130035B-100 (funded by MCIN/AEI/ 10.13039/501100011033/FEDER, “ERDF A way of making Europe”, and the European Union “NextGenerationEU”/PRTR). - Juan de la Cierva program (FJC2021-048057-I) funded by MICIU/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Mountain speciation driven by high rates of lineage formation and rapid evolution of partial reproductive isolation: Insights from a recent radiation of grasshoppers (Orthoptera: Gomphocerinae) [Dataset]

  • Ortego, Joaquín
  • Noguerales, Víctor
Mountains contribute disproportionately to global biodiversity, yet the ecological and evolutionary processes that make them important centers of speciation remain poorly understood. Here, we use a complex of Gomphocerinae grasshoppers distributed across the Pyrenees as a model system to investigate the process of speciation in mountain regions. Clustering analyses revealed a marked genetic fragmentation of populations and divergence time estimates indicated that all lineages split during the Pleistocene (<0.9 Ma). Although all taxa currently exhibit allopatric distributions, fine-scale temporal distribution modeling suggested that their ranges likely overlapped across extensive areas during glacial periods. Despite ample opportunities for historical hybridization, introgression tests indicated that gene flow was restricted to peripheral populations and only one population exhibited a high degree of admixed ancestry. Accordingly, our analyses revealed abrupt genetic discontinuities corresponding to the distributional boundaries of each taxon. Although taxa have probably not achieved complete reproductive isolation, semi-permeable species boundaries do not appear to have compromised their evolutionary independence. These results emphasize the interplay between high rates of lineage formation and the rapid evolution of reproductive barriers in promoting microgeographic speciation in topographically complex landscapes, shedding light on the proximate processes underlying the high levels of neo-endemism observed across mountain ranges worldwide., TED2021-129328B-I00; PID2021-123298NB-I00; Viera y Clavijo postdoctoral fellowship, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary material for Tuning hydroconversion performance of n-hexadecane over Ni/silica-alumina catalysts: Role of Si/Al ratio and nickel loading [Dataset]

  • Andrades García, María
  • Di Stasi, Christian
  • Ayala Cortés, Alejandro
  • Torres Gamarra, Daniel
  • Suelves Laiglesia, Isabel
  • Pinilla Ibarz, José Luis
Under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International license., Table S1. Composition and textural properties of Siral series (hydrated silica-alumina) prior and after calcination at 550 °C. Information obtained from the official Sasol website. Figure S1. TPR pattern of calcined Ni10/Siral40. Figure S2. N2 adsorption-desorption isotherms for NiX/SiralY catalysts. Figure S3. SEM images (top panel) and EDX elemental mappings (bottom panel) for Siral40, Ni10/Siral40 and Ni25/Siral40. Figure S4. Particle size distributions for NiX/SiralY catalysts calculated from TEM images. Figure S5 Liquid (a) and gaseous in H2-free basis (b) products distribution obtained with Ni10/Siral40 at 300 °C and 30, 60, 90 bar of H2. Figure S6. Liquid (a) and gaseous in H2-free basis (b) products distribution obtained with Ni10/Siral40 at 60 bar of H2 and 300, 350 and 400 °C. Figure S7. Liquid (a) and gaseous in H2-free basis (b) products distribution obtained with different supports and with a Ni loading of 10 wt.% at 350 °C and 60 bar of H2. Figure S8. Liquid (a) and gaseous in H2-free basis (b) products distribution obtained with Siral40 as support and different Ni loadings at 350 °C and 60 bar of H2., Research Agency MCIN/AEI/10.13039/501100011033 and EU “NextGenerationEU”/PRTR” through project TED2021- 131416B-I00, and by the MCIN with “NextGenerationEU” funds from the European Union (PRTR-C17-I1) within the Energy and Green Hydrogen-CSIC program, as part of the Interdisciplinary Thematic Platform of the CSIC (PTI+) Sustainable Energy Transition+ (PTI-TRANSENER+). Authors acknowledge the Government of Aragon for the grant awarded to the Fuel Conversion Group (T06_23R). C.D.S is grateful for the Juan de la Cierva (JdC) fellowship (Grant Number: JDC2022-048765-I) funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting information for Continuous production of γ-valerolactone from furfural using optimized catalysts containing Zr and Nb [Dataset]

  • García Moreno, Adrián
  • Saotta, Anna
  • Da Silva, Elianny
  • Miguel, P.J.
  • Allegri, Alessandro
  • Sánchez-Tovar, Rita
  • Morin, Jean-Charles
  • Gardoll, Olivier
  • García Martínez, Tomás
  • López Sebastián, José Manuel
  • Albonetti, Stefania
  • Dimitratos, Nikolaos
  • Solsona, Benjamín
Under a Creative Commons Attribution-NonCommercial 4.0 International licence., Table S1. Comparison between the GVL yield (%) achieved in this work in comparison to the results published in literature for the same reaction in batch mode. GC-FID calibration for continuous flow reactions: In order to obtain the moles of the various compounds actually present at the end of the reaction, it is necessary to calibrate the instrument. Calibrations were carried out on the individual compounds, obtaining the standards by diluting the stock solution in 25mL flasks and adding 20μl of octane as an internal standard in each. The theoretical concentrations of the stock solution and the various standards have been reported in Tables S2 and S3. The compounds used for the calibrations were: furfural (FUR), furfuryl alcohol (FAL), α-angelic lactone (AnL), propyl levulinate (PL), furfuryl ethyl ether (FEE) and γ-valerolactone (GVL). It was not possible to calibrate isopropyl levulinate (which is the molecule that is actually formed during the reaction) as it is not a commercial molecule. It was therefore decided to use its isomer (propyl levulinate) assuming that the two response factors are equal. Furfuryl isopropyl ether (FPE) is also a compound absent on the market and its response factor has been assumed to be the same as that of FEE since it was the closest molecule of those commercially available. The chromatogram obtained from the calibration of the species described is shown in Figure S1. Table S2. List of compounds used and their quantities for the preparation of stock solutions using iPrOH as a solvent Table S3. Concentrations of the standards prepared for each individual compound from their own stock solutions Table S4. XPS results for the different O1s spectral region contributions, The authors would like to acknowledge the Generalitat Valenciana for CIAICO/2024/087 and CIGRIS/2022/198. The authors also thank the Ministerio de Ciencia e Innovación-Agencia Estatal de Investigación and European Union NextGeneration EU through the projects PID2021–126235OB-C33 MCIN/AEI/10.13039/ 501100011033/FEDER Una manera de hacer Europa, UE and TED2021–129555B–I00/AEI/10.13039/501100011033/Unión Europea NextGenerationEU/PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Trachymela sloanei in southeastern Spain

  • Valera, Francisco
  • Castaño-Vázquez, Francisco
  • Marchioro, César Augusto
  • Veiga, Jesús
Data for the paper Valera et al. (2026). Analyzing the ecological requirements of an invasive species the Australian tortoise beetle Trachymela sloanei (Blackburn, 1897) (Coleoptera: Chrysomelidae), to determine the prospects for its invasion process. Journal of Applied Entomology (in press)., [EN] Data about the occurrence of Trachymela sloanei in Almería. The data are linked to the article de Valera et al. (2026). Analyzing the ecological requirements of an invasive species the Australian tortoise beetle Trachymela sloanei (Blackburn, 1897), [ES] Datos sobre la presencia de Trachymela sloanei en Almería. Los datos están vinculados al artículo de Valera et al. (2026). Analyzing the ecological requirements of an invasive species the Australian tortoise beetle Trachymela sloanei (Blackburn, 1897), - Project TED2021-130035B-100, funded by MCIN/AEI/10.13039/501100011033 and by the European Union “NextGenerationEU”/PRTR. - Posdoctoral contract Margarita Salas (CT18/22) from MCIU. - Juan de la Cierva program (FJC2021-048057-I) funded by MICIU/AEI/10.13039/501100011033 and the European Union «NextGenerationEU»/PRTR». - Productivity scholarship (307852/2021-0) from the Brazilian National Council for Scientific and Technological Development (CNPq)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Data for: Limited adaptive responses in safety traits support greater hydraulic risk under drier conditions

  • Ramírez Valiente, José Alberto
  • Poyatos, Rafael
  • Cabon, Antoine
  • Blackman, Chris J.
  • Castells, Eva
  • Cochard, Hervé
  • Creek, Danielle
  • Delzon, Sylvain
  • García-Valdés, Raúl
  • Limousin, Jean-Marc
  • López, Rosana
  • Martín-StPaul, Nicolás
  • Moreno, Myriam
  • Santiago, Louis S.
  • Schuldt, Bernhard
  • Torres Ruiz, José Manuel
  • Valade, Aude
  • Martínez-Vilalta, Jordi
  • Mencuccini, Maurizio
Understanding how plants adjust their hydraulic system to the environment is essential to predict how these organisms will respond to global change. Here, we compiled a dataset of 223 studies on plastic and evolutionary adjustments of hydraulic traits to air temperature, CO2 concentration, irradiance, soil nutrient and water availability. On average, species plastically increased embolism resistance and sapwood area per leaf area under drier conditions, with a decrease in stem-specific hydraulic conductivity and water potential at the turgor loss point, which are consistent with adaptive responses. However, the average increased embolism resistance was not sufficient to compensate the reduction in the minimum water potential implying lower safety margin from lethal hydraulic failure under drought. These results point towards a general critical increase in the risk of hydraulic failure in future drier environments. Plastic responses to increased soil nutrient content and irradiance not always aligned with those to drought underscoring the potential of changes in irradiance and nutrition levels to modify plant hydraulic responses to climate change-driven droughts. Overall, our findings revealed that species exhibit phenotypic plasticity in hydraulic and drought tolerance traits that will be key to accommodating plant phenotypes to the new environmental conditions arising from ongoing global change., M.M. acknowledges support by the Spanish Ministry of Economy and Competitiveness (MINECO) via grant CGL2017-89149-C2-1-R (DRESS) and EU-2020 programme via grant 862221 (FORGENIUS). J.A.R.-V. was supported by a research contract financed by the AEI (Spanish Research Agency) and Ministry of Science through the Severo Ochoa Program for Centres of Excellence in R+D+I (CEX2018-000828-S) and competitive grants TED2021-129570B-I00 and PID2021-126399NB-I00. J.M.-V. acknowledges support from competitive grants CGL2017-89149-C2-1-R and PID2021-127452NB-I00 funded by MCIN/AEI (https://doi.org/10.13039/501100011033), by grant 2021 SGR 00849 funded by AGAUR and by an ICREA Academia award., With funding form the Spanish government through the "Severa Ochoa Centre of Excellence" accreditation (CEX2018-000828-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Disentangling seed availability and establishment filters at alpine treelines through a decade-long field manipulation [Dataset]

  • Lin, Wentao
  • Liang, Eryuan
  • Camarero, Jesús Julio
This study was funded by projects PID2021-123675OB-C43 and TED2021-129770B-C21 (Spanish Ministry of Science and Innovation). We thank the help during sampling and plot establishment of Gabriel Sangüesa-Barreda and Michele Colangelo., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Raw data and analysis of the results corresponding to the manuscript Comparative characterization of copper tolerance in the Saccharomyces genus [DATASET]

  • Sorribes Dauden, Raquel
  • Peris Navarro, David
  • Martínez-Pastor, María Teresa
  • Puig, Sergi
Figure1_rawdata1: This folder contains the raw data distributed as 8 .xlsx files from growth experiments performed with Saccharomyces strains cultured in SC medium supplemented with increasing copper concentrations. It includes time course OD600 measurements, growth parameters generated with GCAT, fractional areas and calculated NIC, MIC, and R² values, as well as the script used to compute NIC and MIC (.Rmd extension). -- Figure2_rawdata2: This .xlsx file contains the raw data used to calculate CUP1 copy number for the Saccharomyces strains analyzed in this study. Ct values obtained through qPCR using genomic DNA and measured on a LightCycler® 480 Instrument II (Roche) were processed and transformed to generate the data presented in Figure 2.-- Figure3_rawdata3: This .zip file contains an .xlsx file showing data transformation for elaboration of figure 3 and raw data (.pdf file) directly obtained from the flow cytometer Muse Cell Analyzer (Millipore, United States).-- Figure4,5,6_rawdata4: This .xlsx file contains the raw data used to obtain mRNA levels of ACT, CUP1, CRS5, SOD1 and TRX2 genes used to create scatterplots, PCAs and Heatmaps of figures 4, 5 and 6., Copper is an essential redox-active metal that serves as a cofactor in fundamental biological processes, including mitochondrial respiration and iron homeostasis. However, excess copper promotes the formation of reactive oxygen species, leading to cellular damage and death. Owing to its antimicrobial properties, copper is widely used in winemaking. Saccharomyces cerevisiae, the primary fermentative yeast, responds to copper excess by transcriptionally inducing the expression of metallothioneins CUP1 and CRS5, along with antioxidant defenses. In this study, we examined copper tolerance across the Saccharomyces genus. Consistent with previous work, CUP1 copy number variation (CNV) and expression was the main determinant of copper tolerance in wine S. cerevisiae strains. In contrast, wild Saccharomyces species, harboring only a single CUP1 copy, showed no correlation between copper tolerance and CUP1 expression levels. Notably, species within the Saccharomyces clade closely related to S. cerevisiae predominantly expressed CUP1, whereas more distantly related species preferentially expressed CRS5. These findings highlight a substantial role for Crs5 metallothionein in copper detoxification when CUP1 amplification is absent and suggest that additional Cup1-independent mechanisms contribute to copper tolerance in non-domesticated Saccharomyces species., This research was supported by MCIN/AEI/10.13039/501100011033 under grants PID2020-116940RB-I00, PID2023-148124OB-I00, TED2021-131349B-I00, CEX2021-001189-S, CIDEGENT/2021/039, and CIESGT/2024/012. Grant TED2021-131349B-I00 was also funded by the European Union “Next Generation EU”/PRTR. Grants CIDEGENT/2021/039 and CIESGT/2024/012 are funded by the Generalitat Valenciana plan GenT program. DP is also supported by the Research Council of Norway (RCN) grant No. RCN 324253, and CSIC programs COOPA24016, FUNDS2024023 and AGAIN25019., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Dinámica de Dinophysis spp. y cierres de bateas por DSP bajo variabilidad ambiental modelada y observada por satélite en las Rías Baixas (costa de Galicia, 2013–2019), Dinámica de Dinophysis spp. e peches de bateas por DSP baixo variabilidade ambiental modelada e observada por satélite nas Rías Baixas (costa de Galicia, 2013–2019), Dynamics of Dinophysis spp. and mussel raft closures due to DSP under modeled and satellite-observed environmental variability in the Rías Baixas (NW Iberian Peninsula, 2013–2019)

  • Padín, X. A.
  • Rodríguez Cruz, Elisabet
  • Nolasco, Rita
  • Cacabelos, Jesús
  • Longa, Ángeles
  • Pazos, Yolanda
  • Otero, Pablo
  • Babarro, José M. F.
  • Dubert, Jesús
  • Velo, Antón
14:08 minutos de duración, calidad 3840x2160px (4k), relación de aspecto 16:9, en color, sin sonido, bitrate 2kbps, Este vídeo muestra la evolución diaria de los contajes de Dinophysis spp. y los cierres de los polígonos de cultivo de mejillón por toxinas lipofílicas asociados a estos dinoflagelados publicados por INTECMAR en las Rías Baixas entre el 2013 y el 2019. El vídeo también incluye mapas superficiales de variables ambientales procesadas específicamente para este estudio: temperatura, salinidad y corrientes (estimadas unificando los modelos hidrodinámicos Regional Ocean Modeling System, ROMS y Coastal and Regional Ocean COmmunity model, CROCO), y clorofila a del producto Atlantic Ocean Colour BGC L4 del Servicio de Monitorización del Medio Marino de Copernicus, índice de afloramiento y viento procedentes de www.indicedeafloramiento.ieo.es; el sumatorio de la descarga fluvial de los ríos Ulla y Umia calculado por Meteogalicia; y un indicador de disponibilidad de alimento resultado del producto de la velocidad de la corriente y la clorofila. Para mejorar la legibilidad de los datos, la descarga fluvial se muestra en una escala logarítmica que permite apreciar tanto los caudales bajos como las grandes riadas. El viento se representa mediante una rosa de los vientos dinámica en coordenadas polares y el índice de afloramiento utiliza una escala simétrica personalizada para resaltar tanto los eventos de upwelling como de downwelling. Finalmente, la disponibilidad de alimento se visualiza a través de un campo de vectores o flechas que indica la dirección y fuerza de la corriente sobre los mapas de clorofila. Esta animación permite visualizar la evolución en el tiempo y las relaciones entre las condiciones del entorno marino y atmosférico. El vídeo no solo ayuda a detectar patrones estacionales y eventos climáticos extremos, sino que ofrece una perspectiva unificada de cómo los factores físicos y biológicos, junto con las decisiones de gestión, condicionan el día a día del cultivo de mejillón en las Rías Baixas. En la web del proyecto REDEIRA (www.redeira.iim.csic.es), el vídeo está disponible en una versión interactiva, que permite seleccionar eventos concretos de la línea temporal, así como ajustar la velocidad de reproducción y su resolución, Este vídeo fue financiado por el proyecto REDEIRA (Proyecto Estratégico Orientado a la Transición Ecológica y a la Transición Digital; Ref: TED2021-132188B-I00), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Data from: High metabolic sensitivity to hot drought in two declining pine species with constrained physiology

  • Gea-Izquierdo, Guillermo
  • Fernández De Simón, María Brígida
  • Sánchez-Gómez, David
  • Martín-Benito, Darío
  • Pérez-Luque, Antonio J.
  • Muiño, Iria
  • Aranda García, Ismael
This dataset includes metabolic data and different functional traits of two different pine species including trees in decline and healthy trees. One dataset includes all different shared metabolites identified in the two species and individuals sampled under peak drought stress. The second dataset includes functional traits from gas exchange, hydraulics and osmotic relationships. These functional traits were assessed during two study years with contrasting summer drought., MCIN/AEI /10.13039/501100011033: PID2019-110273RB-I00 MCIN/AEI /10.13039/501100011033: PID2022-142746NB-I00 EU NextGenerationEU/PRTR: TED2021-131947B-100, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Data from:Quantitative wood anatomical characteristics, basal area increments (BAI) and tree-ring derived intrinsic water-use efficiency (iWUE) for three coniferous tree species in Central Spain

  • Martín-Benito, Darío
  • Férriz, Macarena
  • Conde-García, María
  • Gea-Izquierdo, Guillermo
Increasing aridity is a major threat to forests worldwide. Understanding tree functional constraints under drought and their impacts on resilience and mortality among species is crucial to assess global change on forests. We analyzed the long-term drought and atmospheric CO₂ responses in three Mediterranean co-occurring species with differing drought tolerances (Pinus pinaster < Pinus pinea < Juniperus oxycedrus). In this mixed forest, P. pinaster exhibited widespread mortality and mistletoe infection, P. pinea showed scattered mortality, and J. oxycedrus showed no decline. Using tree-ring data (1978–2016), we compared intrinsic water-use efficiency (iWUE) and xylem hydraulic traits in healthy and non-healthy individuals of both pine species and healthy junipers. Healthy P. pinaster trees produced a more hydraulically efficient xylem, with wider lumen tracheids, than non-healthy trees, whereas P. pinea showed no anatomical differences between health status. Healthy P. pinaster displayed greater anatomical plasticity, adjusting hydraulic conductivity and cell-wall thickness to water availability. Despite small differences in average iWUE, the response of iWUE to rising CO2 and drought differed between species and health status. J. oxycedrus and P. pinea showed steady iWUE increases, but P. pinea experienced periods of stagnation following an extreme drought, later recovering regardless of health status. In contrast, iWUE in P. pinaster plateaued for over 20 years after a drought-inducing drought, particularly in non-healthy, mistletoe-infected trees. Differences in iWUE response to CO2 and anatomical plasticity to drought may explain the contrasting mortality patterns among these coniferous species. Our results suggest a long-term decline spiral in P. pinaster induced by low hydraulic efficiency in drought-induced defoliated trees and limited physiological response to rising CO₂ and drought. Increasing drought stress makes pine recovery increasingly unlikely., Ministerio de Ciencia, Innovación y Universidades: PID2019-110273RB-I00 Ministerio de Ciencia, Innovación y Universidades: PID2022-142746NB-I00 Ministerio de Ciencia, Innovación y Universidades: AGL2015-73190-JIN Ministerio de Ciencia, Innovación y Universidades: RYC-2017-23389 Ministerio de Ciencia, Innovación y Universidades: AGL2014-61175-JIN Ministerio de Ciencia, Innovación y Universidades: RyC-2014-15864 Ministerio de Ciencia, Innovación y Universidades: TED2021-131947B-100 Swiss National Science Foundation: CALEIDOSCOPE (212902), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Water-resistant hybrid perovskite solar cell -- drop triboelectric energy harvester [Dataset]

  • Núñez-Gálvez, Fernando
  • García-Casas, Xabier
  • Contreras-Bernal, Lidia
  • Descalzo, Alejandro
  • Obrero-Pérez, José M.
  • Castillo-Seoane, Javier
  • Ginés, Antonio J.
  • Leger, Gildas
  • Sánchez-López, J.C.
  • Espinós, J.P.
  • Barranco, Ángel
  • Borrás, Ana
  • Sánchez-Valencia, J. R.
  • López-Santos, Carmen
Hybrid energy-harvesting systems that combine perovskite solar cells (PSCs) with drop-driven triboelectric nanogenerators (D-TENGs) offer a compelling solution for continuous power generation under diverse weather conditions. Yet, the inherent vulnerability of halide perovskites to moisture and environmental stressors remains a critical barrier to their widespread deployment. To overcome this bottleneck, we introduce plasma-deposited fluorinated polymers (CFₓ) films as multifunctional encapsulation layers that simultaneously provide water resistance, triboelectric functionality, and optical transparency (>90 %). Plasma deposition enables conformal, room temperature, and solvent-free coating of complex surfaces, ensuring uniform protection without compromising photovoltaic performance. After encapsulation of PSCs with CFx films, power conversion efficiency remained virtually unchanged, and champion cells preserved a PCE of 17.9 %. More importantly, the devices exhibited high environmental stability, retaining over 50 % of their initial PCE for 10 days under high humidity and temperature. Furthermore, CFx layers enabled Spiro-OMeTAD compatibility with commercial UV-curable resins, leading to a thin-film hybrid PSC/D-TENG device capable of simultaneous solar and rain energy harvesting. This device maintained 80 % of its initial performance after 300 h of continuous illumination under humid conditions and demonstrated stability under continuous dripping and illumination for more than 5 h. We demonstrated that optimizing the chemical composition of CFx layers significantly enhances their triboelectric performance. In standalone operation, the optimized CFₓ-based D-TENG, enriched with 36.4 % of (CF2 + CF3) functional species, delivered open-circuit voltage peaks up to 110 V and a maximum power density of ∼4 mW/cm2 under rainwater droplets, while retaining over 85 % of its initial output after more than 17,000 droplet impacts. As a proof of concept, using the same CFx layer for both encapsulation and triboelectric functionality, the hybrid PSC/D-TENG device achieved short-circuit current densities of 11.6 mA/cm2 under 0.5 sun illumination and peak voltages of 12 V per raindrop, enabling simultaneous solar and rain energy harvesting. A self-charging prototype powered LED arrays via a custom boost converter, demonstrating practical multisource energy harvesting for low-power electronics., The authors thank the projects PID2022–143120OB-I00, PCI2024–153451 and TED2021–130916B-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe", Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia. We also thank the Consejería de Universidad, Investigación e Innovación of Junta de Andalucía through project DGP_PIDI_2024_02239. Project ANGSTROM was selected in the Joint Transnational Call 2023 of M-ERA.NET 3, an EU-funded network of about 49 funding organizations (Horizon 2020 grant agreement No 958174). XGC acknowledges the FPU program under the grant number FPU19/01864. FNG and CLS acknowledges the “VII Plan Propio de Investigación y Transferencia” of the Universidad de Sevilla. The project leading to this article has received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers)., Fig 1a; Fig 1b; Fig 1e; Fig 2b; Fig 2c; Fig 2d; Fig 2e; Fig 3a; Fig 3b; Fig 3c; Fig 3d; Fig 3f; Fig 4a; Fig 4b; Fig 4c Fig 5a; Fig 5b; Fig 5c; Fig 5d; Fig 5e; Fig 5f; Fig 5g; Fig 5h; Fig 6e; Fig 7a; Fig 7d; Fig 7e; Fig 7f, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Raw data and analysis of the results corresponding to the manuscript Excess copper causes repression of global translation in Saccharomyces cerevisiae

  • Andrés Bordería, Amparo
  • Romero, Antonia
  • Sorribes Dauden, Raquel
  • Peñarrubia, Lola
  • Martínez-Pastor, María Teresa
  • Puig, Sergi
  • Perea García, Ana
Figure 1. Growth and viability of cells constitutively expressing CTR1(300) in copper-containing media. -- Figure 2. Copper status of CTR1(300)-expressing cells. -- Figure 3. Analysis of oxidative damage in cells expressing the CTR1(300) copper transporter. -- Figure 4. Growth of CTR1(300)-expressing cells in lysine-limiting conditions. -- Figure 5. Oxygen consumption of the cells expressing CTR1(300) copper transporter. -- Figure 6. Characterization of global translation levels in wild-type cells and in the CTR1(300) mutant in response to copper excess., Copper is an essential cofactor for numerous metabolic pathways; however, excess intracellular copper is cytotoxic. Under conditions of copper overload, copper enters the cell as Cu2+ through low affinity divalent metal transporters, thereby inducing oxidative stress that damages cellular components, leading to cellular disfunction. In this study, we investigated the consequences of deregulated Cu+ uptake mediated by the high-affinity copper transport Ctr1 in Saccharomyces cerevisiae. Constitutive expression of a carboxy-terminally truncated Ctr1 variant, CTR1(300), resulted in elevated intracellular copper levels, increased oxidative stress, and reduced oxygen consumption, likely due to impairment of iron-sulfur cluster-containing proteins. Notably, CTR1(300)-expressing cells exhibited a pronounced repression of a global protein synthesis translation at very low copper concentrations, a phenotype that was recapitulated in wild-type cells exposed to higher copper levels. These findings reveal that excessive copper accumulation negatively impacts cellular respiration and translation, identifying protein synthesis as a sensitive target of copper toxicity., This research was supported by MCIN/AEI/10.13039/501100011033 under grants PID2020-116940RB-I00, PID2023-148124OB-I00, TED2021-131349B-I00 and CEX2021-001189-S. Grant TED2021-131349B-I00 was also funded by the European Union “Next Generation EU”/PRTR., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Enhanced thermoelectric performance in Fe2V0.8W0.2Al thin films: synergistic effects of chemical ordering and tungsten substitution [DATASET]

  • Domínguez-Vázquez, José María
  • Tenaguillo Arrese, Miguel Ángel
  • Lohani, Ketan
  • Caballero-Calero, Olga
  • Manzano, Cristina V.
  • Plata, José J.
  • Márquez, Antonio M.
  • Cebollada, Alfonso
  • Conca, André
  • Martín-González, Marisol
This is the Dataset from the study in which we systematically investigate the combined effect of chemical ordering and W substitution on the thermoelectric properties of Fe2V0.8W0.2Al thin films. Through controlled sputter deposition on MgO (100) and Al2O3 (11[2 with combining macron]0) substrates at temperatures ranging from 350 °C to 950 °C, we achieve varying degrees of crystalline and chemical order. Films deposited between 750 °C and 950 °C adopt the highly ordered L21 phase, exhibiting a dramatic enhancement in Seebeck coefficient and substantial reduction in thermal conductivity compared to isostructural Fe2VAl thin films without tungsten substitution. These synergistic improvements, attributed to electronic structure modifications and enhanced phonon scattering mechanisms, yield exceptional thermoelectric performance with maximum power factors of 730 ± 70 µW m−1 K−2 and figure of merit zT = 0.12 ± 0.03 at room temperature, representing a more than four-fold enhancement over undoped Fe2VAl and demonstrating the potential for sustainable energy harvesting applications, The authors would also like to acknowledge the service from the MiNa Laboratory at IMN, and its funding from CM (project SpaceTec, S2013/ICE2822), MINECO (project CSIC13-4E-1794), and EU (FEDER, FSE). This work was funded by projects THERMHEUS grant TED2021-131746B-I00 funded by MICIU/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” and ERC Adv. POWERbyU grant agreements ID: 101052603 Founded by European Research Council (ERC), grant PID2022-138063OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by FEDER, UE. We thankfully acknowledge the computer resources at Lusitania (Cenits-COMPUTAEX), Red Española de Supercomputación, RES (QHS-2023-1-0028) and Albaicín (Centro de Servicios de Informática y Redes de Comunicaciones - CSIRC, Universidad de Granada). KL acknowledges Aid JDC2023-050703-I funded by MICIU/AEI/10.13039/501100011033 and by the ESF+., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Geometry-driven plasmonic heating in Bi₂Te₃ nanostructures: Intrinsic surface plasmons enable enhanced thermoelectric voltage [DATASET]

  • Caballero-Calero, Olga
  • Manzano, Cristina V.
  • Cantarero, Andrés
  • Martín-González, Marisol
Plasmonic heating in geometrically optimized bismuth telluride (Bi₂Te₃) nanostructures enables efficient thermoelectric energy harvesting by reducing interfacial losses compared to metal nanoparticle-dependent systems. This Dataset is from this study in which we demonstrate that 3D Bi₂Te₃ nanowire networks, fabricated via template-assisted electrochemical deposition, achieve a localized temperature rise of 14 °C under 650 nm illumination, which is twice the heating obtained in 1D nanowire arrays and three times higher than Bi₂Te₃ films, through intrinsic plasmonic resonance. Raman thermometry and wavelength-dependent analysis reveal that this geometric enhancement correlates with a 250 % increase in thermoelectric voltage output compared to conventional designs. By leveraging Bi₂Te₃’s dual functionality as a topological insulator and plasmonic material, our work establishes a scalable, cost-effective platform for advanced energy harvesting devices, with immediate applications in wearable IoT systems and sustainable thermal management technologies., The authors would like to express our gratitude to Professor Gaspar Armelles for his guidance at the onset of this research. This work was funded under project ERC ADG Grant PowerbyU (ERC-2021-ADG contract number 101052603). The authors would also like to acknowledge the service from the MiNa Laboratory at IMN, and its funding from CM (project SpaceTec, S2013/ICE2822), MINECO (project CSIC13-4E-1794 and TED2021-129298B-I00), and EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Late Glacial–Holocene fossil pollen record from N'Harcha (Middle Atlas, Morocco) documenting forest dynamics with focus on Cedrus atlantica

  • Alba Sánchez, Francisca
  • Abel Schaad, Daniel
  • Iriarte, Eneko
  • López Sáez, José Antonio
  • Pérez Díaz, Sebastián
  • Cheddadi, Rachid
  • González Hernández, Antonio
This dataset provides the fossil pollen record from the N’Harcha site (Middle Atlas, Morocco), spanning the Late Glacial–Holocene transition (~12,960 cal yr BP to present). It includes percentage data for individual taxa, summary categories (Trees, Shrubs, Herbs, Ferns, Hygrophytes), non-pollen palynomorphs, total pollen concentration, and charcoal counts (>125 μm). These variables allow the reconstruction of postglacial vegetation dynamics with particular focus on Cedrus atlantica, a key Mediterranean conifer sensitive to climatic variability and human disturbance., This publication is part of the project I + D + i TED2021-132631B-I00 funded by MICIU/AEI/10.13039/501100011033 and by NextGenerationEU/PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Data and stadistical Analysis for Electrochromic polyoxometalates for sensing abiotic stress in plants

  • González Garnica, Ana Isabel
  • Pérez-Gordillo, Felipe L.
  • Alarcón-Guijo, Pablo
  • Romero-Puertas, María C.
  • Sandalio, Luisa M.
  • Domínguez-Vera, José M.
Ministerio de Ciencia, Innovación y Universidades TED2021-130392A-I00 Ministerio de Ciencia, Innovación y Universidades PID2021-122280NB-I00, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Holocene Fossil Pollen Record from Merj Lkhil (Western Rif Mountains, Morocco): A 7000-Year Reconstruction of Cedrus atlantica Forest Dynamics

  • Alba Sánchez, Francisca
  • Abel Schaad, Daniel
  • López Sáez, José Antonio
  • Romera Romera, Daniel
  • Pérez Díaz, Sebastián
  • González Hernández, Antonio
This dataset presents the Holocene fossil pollen record from the Merj Lkhil site in the Western Rif Mountains (Morocco), documenting ~7000 years of Cedrus atlantica forest dynamics at the northwestern distribution margin of the species. The 2.3 m sediment core spans from the early Northgrippian (~7118 cal yr BP) to the present and provides percentage data for individual taxa, functional groups (Trees, Shrubs, Herbs, Ferns, Hygrophytes), non-pollen palynomorphs, total pollen concentration, and charcoal counts (>100 μm). Located at higher elevation than other previously studied sequences in Jbel Bou Hachem, this record offers new insights into long-term forest composition, resilience, and ecological thresholds, and allows assessment of vegetation responses to Holocene climate variability, increasing aridity, and anthropogenic disturbance in the western Mediterranean., This publication is part of the project I + D + i TED2021-132631B-I00 funded by MICIU/AEI/10.13039/501100011033 and by NextGenerationEU/PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

TAPPINESS_CapturasTIV_N2

  • Galera-Notario, Claudia
  • Mas, Hugo
  • Zas Arregui, Rafael
  • Sampedro Pérez, Luis
  • Lema Márquez, Margarita
TAPPINESS_CapturasTIV_N2 (xlsx), TAPPINESS “Disentangling the effects of resin TAPPINg to Ensure the resilience and Sustainable provision of Ecosystem Services by Maritime pine forests” (MCIN/AEI/10.13039/501100011033 and “NextGenerationEU”/PRTR, reference TED2021–132456B-I00), Peer reviewed, Modelo experimental animal, Organismos alternativos no vertebrados - Invertebrados
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Database of the blue carbon inventory in Spain and Portugal. Organic carbon biomass and soil stocks and sequestration rates to the soil.

  • Piñeiro Juncal, Nerea
  • Serrano, Oscar
  • Santos, Carmen B. de los
  • Marbà, Núria
  • Díaz-Almela, Elena
  • Tuya, Fernando
  • Mazarrasa, Inés
  • Garmendia, Joxe Mikel
  • Otero, Xosé Luis
  • Inostroza, Karina
  • Pagès, Jordi F.
  • Méndez Martínez, Gonzalo
  • Fernández, E.
  • Sousa, Ana I.
  • Camacho, A.
  • Ballesteros, Enric
  • Barañano, Carlota
  • Belshe, E. Fay
  • Bernabeu, Irene
  • Brun, Fernando G.
  • Camacho-Santamaría, Alba
  • Delgado Huertas, Antonio
  • Dahl, Martin
  • Duarte, Carlos M.
  • Espino, Fernando
  • Franco, Javier
  • Freitas, Maria de Conceiçao
  • García-Orellana, Jordi
  • Garrigos, Bernat
  • Gomis, Enric
  • Haroun, Ricardo
  • Hernández, Ignacio
  • Juanes, José A.
  • Leiva-Dueñas, Carmen
  • Lavery, Paul S.
  • Lilebo, Ana
  • Lopes, Vera
  • Majténti-Hill, Claudia
  • Marco-Méndez, Candela
  • Martins, Marcio
  • Monnier, Briac
  • Morant, Daniel
  • Montero, Natalia
  • Neto, Joao M.
  • Ondiviela, Bárbara
  • Peralta González, Gloria
  • Picazo Mozo, Antonio
  • Reithmaier, Gloria Maria Susanne
  • Rochera, Carlos
  • Román, Marta
  • Santos, Isaac
  • Santos, Rui
  • Serrano, Eduard
  • Soler Roig, Montserrat
  • Yau Yau, Yu
  • Weitzmann, Boris
  • Zribi, Imen
  • Mateo, Miguel Ángel
This database is a compilation of published and unpublished data used to estimate (i) the organic carbon biomass stocks, (ii) the soil organic carbon stock, and (iii) the rates of organic carbon sequestration to the soil associated to Spanish and Portuguese seagrass meadows and salt marshes., This work is a contribution of the groups Group of Benthic Ecology (SGR-00405), Group of Aquatic Macrophyte Ecology (GAME-CSIC-632711), the Spanish Group of Experts in Blue Carbon Ecosystems (G3ECA - RED2024-153711-E), and the CSIC Interdisciplinary Thematic Platform OCEANS+, funded by the European Union-Next Generation EU Agreement between MITECO, CSIC, AZTI, SOCIB, and the universities of Vigo and Cadiz, to promote research and generate scientific knowledge in the field of marine sustainability. This work has received financial support from the Xunta de Galicia (Centro de Investigación de Galicia accreditation 2019-2022), the European Union (European Regional Development Fund - ERDF) and the FCT-Foundation for Science and Technology for the financial support to CESAM (UIDB/50017/2020 + UIDP/50017/2020 + LA/P/0094/2020). NPJ was supported by a Juan de la Cierva fellowship (JDC2022-048342-I, funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR”). CBdlS received Portuguese national funds from FCT - Foundation for Science and Technology through projects UIDB/04326/2020 (DOI:10.54499/UIDB/04326/2020) and LA/P/0101/2020 (DOI:10.54499/LA/P/0101/2020) and 2020.03825.CEECIND (DOI:10.54499/2020.03825.CEECIND/CP1597/CT0005). MM was funded through an FCT PhD grant (DOI:10.54499/2020.06996.BD). JFP acknowledges funding by the project PID2023-151732OA-I00 and contract RYC2022-036196-I, awarded by MCIN/AEI/10.13039/501100011033 and the FSE+. MR was supported by a post-doc fellowship from the Xunta de Galicia (ED481A-2020/199). A.C-S was supported by a FPU Predoctoral Scholarship by the Spanish Ministry of Science Innovation and Universities under Grant FPU21/04314. This work was supported by projects LIFE BLUE NATURA (LIFE14CCM/ES/000957), funded by European Union; CLIMAWET-CONS (PID2019-104742RB-I00) and WETCARVER (PDC2022–133205–I00), funded by MICINN and/or AEI, of the Spanish Government, supported with FEDER–EU and MRR–EU Funds, respectively; project SEAFRONT (TED2021-132132B-C22, Spanish Ministry of Science and Innovation) and the framework of the activities of the Spanish Government through the "Maria de Maeztu Centre of Excellence" accreditation to IMEDEA (CSIC-UIB) (CEX2021-001198). We acknowledge the support of the Spanish MICIU/AEI /10.13039/501100011033 and the European Union NextGenerationEU/ PRTR (TED2021-129973B-I00; Restoration beyond biodiversity: How to integrate estuarine ecosystem services into nature-based management (MarshA) to B.O); and the Portuguese Fundação para a Ciência e Tecnologia, FCT, I.P./MCTES through national funds (PIDDAC): UID/50019/2025 and LA/P/0068/2020 https://doi.org/10.54499/LA/P/0068/2020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Indoor Energy Harvesting Enhancement: Pb-Free Perovskite Solar Cell with Nanostructured Grating Contact

  • Vergaz, Ricardo
  • Sarcanean, Daniel
  • Barreda, Angela
  • López-Fraguas, Eduardo
  • García Cámara, Braulio
  • Mora-Sero, Iván
  • García-Martín, Antonio
Halide perovskite materials have spread in solar cells and photodetectors because of their excellent possibilities in tuning their absorption wavelengths, ease of fabrication, and low carbon footprint. However, their main drawbacks are related to their short device lifetime and stability problems in addition to limited efficiency at certain wavelength. For this reason, in this letter, we design a metasurface that can be integrated into a particularly long-life, stable and sustainable perovskite solar cell with the aim of enhancing its performance under indoor conditions. The metasurface has been designed and numerically simulated to enhance the halide perovskite response at the typical emission wavelengths of indoor LEDs. Adjusting the response of these solar cells to those specific spectral ranges by metasurfaces may create novel energy harvesting devices., Agencia Estatal de Investigación (España): TED2021-131600BC31 (STEP-UP), Agencia Estatal de Investigación (España): TED2021-131600BC33 (STEP-UP), Agencia Estatal de Investigación (España): PID2022-140090OBC21 (PLEDs), Agencia Estatal de Investigación (España): PID2022-140090OBC22 (PLEDs), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Replication Code and Data for "Organisational Attitudes and Preferences towards Forest Carbon Offsets in Spain's Carbon Footprint Registry" (PLS-SEM and Mixed Logit Analysis)

  • Morales, Brenda
  • Ovando Pol, Paola
This repository contains the RStudio code used to estimate Structural Equation Models via Partial Least Squares (PLS-SEM), based on a Theory of Planned Behaviour survey, as well as the loop developed to stabilise the estimation of a Discrete Choice Experiment using mixed logit models. The code has been specifically developed for this study and enables full replication of the results reported in Ecological Economics. The dataset used in the analysis is also included in this repository to ensure transparency and reproducibility., This dataset contains the empirical data underlying the analysis of organisational attitudes, behavioural drivers, and preferences for forest carbon offset projects in Spain, as examined in the associated article published in Ecological Economics. The data combine two complementary components: (i) a structured survey grounded in the Theory of Planned Behaviour (TPB), capturing organisational perceptions, motivations, and prior behaviour regarding carbon offsetting, and (ii) a Discrete Choice Experiment (DCE) designed to elicit stated preferences over key attributes of forest carbon projects, including project type, species composition, geographic location, and price., The survey data (dataset_RHCOffset.csv) include 249 observations and approximately 40 variables measuring attitudes, subjective norms, perceived behavioural control, trust, risk perceptions, and organisational characteristics such as size, sector, and past offsetting behaviour. The experimental dataset (dataset_choice.csv), structured in long format (3,984 observations), records individual choices across repeated choice tasks and incorporates both project attributes and latent variable scores derived from the structural model., Data were collected from organisations registered in Spain’s Carbon Footprint Registry (Registro de Huella de Carbono, MITECO) through an anonymised survey administered using unique access links. Each respondent evaluated a random block of eight choice cards describing hypothetical carbon sequestration projects with varying attributes and price levels., The dataset is provided in CSV format and is accompanied by a detailed codebook describing all variables, coding schemes, and transformations. It enables full replication of the structural equation modelling (PLS-SEM) and mixed logit estimations presented in the article, as well as further research on organisational behaviour in voluntary carbon markets., The data are released under a Creative Commons Attribution 4.0 (CC BY 4.0) license to promote transparency, reproducibility, and reuse in environmental economics research., FOREWAY:Finding Viable Pathways for Forest Carbon Offsetting in Europe. (PID2021-125340OA-I00).Funded by: MCIN/AEI /10.13039/501100011033/ and FEDER/EU, FORCARBON: Understanding business preferences for forest carbon offsets. (Ref. TED2021-130910A-I00). Funded by: MCIN/AEI /10.13039/501100011033/ and European Union – NextGenerationEU/ PRTR), Organisational_forest_carbon_offsets.pdf; dataset_RHCOffset.csv; dataset_choice.csv; questionnaire.pdf; codebook.pdf, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Figures of the publication entitled "Recycling and reutilization of metals aided by deep eutectic solvents: from NMC cathodes of spent Li-ion batteries to electrolytes for supercapacitors" resulting from project PID2021-125357OB-I00 [Dataset]

  • Xu, Boren
  • Díez Nogués, Noel
  • Sevilla Solís, Marta
  • Ferrer, M. Luisa
  • Gutiérrez, María C.
  • Monte, Francisco del
Dataset corresponding to the figures of articles: Recycling and reutilization of metals aided by deep eutectic solvents: from NMC cathodes of spent Li-ion batteries to electrolytes for supercapacitors; Xu, Boren et al.; ChemSusChem 2025, 18, e202401128; https://doi.org/10.1002/cssc.202401128, This work was supported by MCIN/AEI/10.13039/501100011033 (TED2021-130372B-C42, TED2021-131812B-I00, IDI/2018/000148 and PID2021-123648OB-I00), by “ERDF A way of making Europe” (PID2021-123648OB-I00 and IDI/2018/000148) and by “European Union Next Generation EU/PRTR” (TED2021-130372B-C42 and TED2021-131812B-I00). B.X. acknowledges the China Scholarship Council for a Ph.D. research fellowship (CSC No. 20210842007)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset of Olive seed protein hydrolysates possess antioxidant and anti-inflammatory activities in mice and human cells

  • Cruz-Chamorro, Iván
  • Bartolomei, Martina
  • Santos-Sánchez, Guillermo
  • Ponce-España, Eduardo
  • Álvarez-López, Ana Isabel
  • Blázquez Nieto, Yaiza
  • García Rodríguez, Carlos
  • Bollati, Carlotta
  • d'Adduzio, Lorenza
  • Fanzaga, Melissa
  • Lammi, Carmen
  • Carrillo-Vico, Antonio
The dataset includes the raw data carried out in the work titled "Olive seed protein hydrolysates possess antioxidant and anti-inflammatory activities in mice and human cells". The olive seed protein hydrolysates (OSPHs) demonstrated antioxidant and immunomodulatory effects on RAW 246.7 cells and human peripheral blood mononuclear cells, suggesting their potential for use in developing new functional foods or nutraceuticals. The aim of this work was to deepen the study of multifunctional behavior of OSPHs obtained from the Frantoio cultivar of Olea europaea L., prepared using two food-grade enzymes, namely Alcalase® (AH) and Papain (PH), studying their antioxidant capacity and possible immunomodulatory activity on a murine monocyte/macrophage cell line (RAW 246.7) and on the human peripheric blood mononuclear cells (PBMCs)., TED2021-131108B-I00, The data set titled “OliveSeedProteinHydrolysates_Dataset.xlsx” includes raw data from in vitro experiments., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Integrating qPCR and Next-Generation Sequencing to assess plant-parasitic nematodes under different vineyard management practices [Dataset]

  • González-Trujillo, María del Mar
  • Blanco-Pérez, Rubén
  • Palomares Rius, Juan E.
  • Ramos-Saez De Ojer, José Luis
  • Álvarez-Ortega, Sergio
  • Campos-Herrera, Raquel
Analysis from field derived data described in the material and method section in the article, P.R.11-23 and P.R.14-24 from the Government of La Rioja, co-financed with FEDER 2021-2027 funds from the La Rioja Program (political objective 1 - research line 1 viticulture and enology) grant TED2021-129169B-I00 funded by MCIN/AEI/10.13039/501100011033 and the “European Union NextGenerationEU/PRTR. Support for researchers: RBP is funded by the Consejería de Innovación (Government of La Rioja, Spain, (Resolution 198/2025, call 2025–2028) MMGT was awarded a FPI-CAR-2022 fellowship (University of La Rioja, Spain), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Mountain speciation driven by high rates of lineage formation and rapid evolution of partial reproductive isolation: Insights from a recent radiation of grasshoppers (Orthoptera: Gomphocerinae) (Version 1)

  • Ortego, Joaquín
  • Noguerales, Víctor
All versions are available at DOI 10.6084/m9.figshare.29046218, Mountains contribute disproportionately to global biodiversity, yet the ecological and evolutionary processes that make them important centers of speciation remain poorly understood. Here, we use a complex of Gomphocerinae grasshoppers distributed across the Pyrenees as a model system to investigate the process of speciation in mountain regions. Clustering analyses revealed a marked genetic fragmentation of populations and divergence time estimates indicated that all lineages split during the Pleistocene (<0.9 Ma). Although all taxa currently exhibit allopatric distributions, fine-scale temporal distribution modeling suggested that their ranges likely overlapped across extensive areas during glacial periods. Despite ample opportunities for historical hybridization, introgression tests indicated that gene flow was restricted to peripheral populations and only one population exhibited a high degree of admixed ancestry. Accordingly, our analyses revealed abrupt genetic discontinuities corresponding to the distributional boundaries of each taxon. Although taxa have probably not achieved complete reproductive isolation, semi-permeable species boundaries do not appear to have compromised their evolutionary independence. These results emphasize the interplay between high rates of lineage formation and the rapid evolution of reproductive barriers in promoting microgeographic speciation in topographically complex landscapes, shedding light on the proximate processes underlying the high levels of neo-endemism observed across mountain ranges worldwide., TED2021-129328B-I00; PID2021-123298NB-I00; Viera y Clavijo postdoctoral fellowship, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Inferring seagrass meadow resilience from self-organized spatial patterns (Version v1.0.0)

  • Giménez-Romero, Alex
  • Campo, Elena del
  • Matías, Manuel A.
All versions are available at DOI 10.5281/zenodo.18977493, This archive contains the code, trained models, and derived datasets associated with the study “Inferring seagrass meadow resilience from self-organized spatial patterns”. The archive provides a self-contained companion resource to the manuscript. It includes the computational workflow used to generate synthetic seascapes from a mechanistic model of seagrass self-organization, preprocess the simulated patterns, train convolutional neural network (CNN) models, and apply the trained models to empirical habitat cartography from the Balearic Islands. The archive contains: the full code repository used in the study; trained deep-learning models for pattern classification and effective mortality estimation; geospatial outputs of predicted meadow states and inferred effective mortality for each region; summary tables of predicted pattern classes; a pixel-level table of inferred effective mortality and predicted pattern type; a patch-level dataset of structural descriptors, inferred mortality, and predicted pattern type; a text file mapping the numerical pattern labels to their ecological class names. The central aim of the study is to infer the condition of Posidonia oceanica meadows from self-organized spatial patterns. To do so, the workflow combines ecological theory, machine learning and empirical benthic cartography. The resulting models are used to predict discrete meadow states and a continuous effective mortality parameter from spatial pattern alone. This archive is intended to facilitate reproducibility, reuse of the trained models, and inspection of the derived spatial products. Notes on archive contents: models/ contains the trained models in HDF5 (.h5) format together with metadata files. patterns_summary.csv summarizes the number of predicted patterns of each type in each region. patterns_mortalities_all.parquet contains pixel-level predictions, including inferred effective mortality and predicted pattern type. measures_dataset.csv contains patch-level structural descriptors together with inferred mortality and predicted pattern type. patterns/ contains GeoTIFF and GeoJSON files of predicted pattern classes for each region. mortality/ contains GeoTIFF files of inferred effective mortality for each region. pattern_label_mapping.txt provides the translation between numerical class labels and ecological pattern names. The empirical habitat cartography used in the study was obtained from regional data sources from the Balearic Islands. Access to the original raw habitat data depends on the corresponding providers., Ministerio de Ciencia, Innovación y Universidades PID2021-123723OB-C22 Ministerio de Ciencia, Innovación y Universidades TED2021-131836B-I00 Ministerio de Ciencia, Innovación y Universidades PID2024-156062OB-I00 Ministerio de Ciencia, Innovación y Universidades CEX2021-001164-M Ministerio de Ciencia, Innovación y Universidades JDC2024-053275-I, With funding from the Spanish government through the "Maria de Maeztu Centre of Excellence" accreditation (CEX2021-001164-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Human disturbance, prey availability and refuge cover shape wolf movements in anthropized landscapes (Version v1)

  • Ferreiro-Arias, Iago
  • Martínez Rueda, Iris
  • García, Emilio J.
  • Palacios, Vicente
  • Sazatornil, Víctor
  • Rodríguez, Alejandro
  • López-Bao, José V.
  • Llaneza, Luis
All versions are available at DOI 10.5281/zenodo.18656863, This repository contains the cleaned dataset and R scripts necessary to reproduce the analyses presented in the study "Human disturbance, prey availability and refuge cover shape wolf movements in anthropized landscapes", accepted in Behavioral Ecology., The dataset includes processed movement data of wolves in human-dominated landscapes, specifically prepared for the analysis of daily movement patterns. It contains descriptive variables and environmental predictors used in the statistical models, but does not include sensitive information such as raw GPS coordinates (latitude/longitude) of wolf locations, in compliance with Spanish legislation protecting this endangered species (Spanish Royal Decree 139/2011 and Ministerial Order TED/980/2021). Raw data supporting the findings of this study are available upon request from A.RE.NA. Asesores en Recursos Naturales, S.L., but are not publicly available due to their sensitive nature, as they contain precise locations of wolves and packs., Junta de Andalucía Predoctoral Research Grant PREDOC_01122; Consejo Superior de Investigaciones Científicas 202130E006; Ministerio de Ciencia, Innovación y Universidades TED2021-132519B-I00; Gobierno del Principado de Asturias GRUPIN research grant AYUD/2021/51314, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

PRIO LLUV Radial Metrics Dataset Computed Using SeaSondeR R Package

  • Herrera, Juan L.
  • Fernández Baladrón, Adrián
  • Rosón, Gabriel
  • Gilcoto, Miguel
  • Dubert, Jesús
  • Montero, Pedro
  • Varela, Ramiro
4 files.-- Access to the zip files: https://doi.org/10.5281/zenodo.16528653, This repository collects the Radial Metrics in CODAR's LLUV format obtained from the SeaSondeR package of the PRIO HF-Radar station maintained by INTECMAR. For more details on the processing of these data, please check: Herrera Cortijo, J. L., Fernández-Baladrón, A., Rosón, G., Gil Coto, M., Dubert, J., Montero, P., & Varela Benvenuto, R. (2025). Project HF-EOLUS. Task 2. Obtaining Radial Metrics from INTECMAR's VILA and PRIO Stations' Spectra. (v1.0.0). Zenodo. https://doi.org/10.5281/zenodo.16679609, This work has been funded by the HF-EOLUS project (TED2021-129551B-I00), financed by MICIU/AEI /10.13039/501100011033 and by the European Union NextGenerationEU/PRTR - BDNS 598843 - Component 17 - Investment I3, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

VILA LLUV Radial Metrics Dataset Computed Using SeaSondeR R Package

  • Herrera, Juan L.
  • Fernández Baladrón, Adrián
  • Rosón, Gabriel
  • Gilcoto, Miguel
  • Dubert, Jesús
  • Montero, Pedro
  • Varela, Ramiro
8 files.-- Access to zip files https://zenodo.org/records/16458694, This repository collects the Radial Metrics in CODAR's LLUV format obtained from the SeaSondeR package of the VILA HF-Radar station maintained by INTECMAR between 2011-09-30 and 2023-05-10. For more details on the processing of these data, please check: Herrera Cortijo, J. L., Fernández-Baladrón, A., Rosón, G., Gil Coto, M., Dubert, J., Montero, P., & Varela Benvenuto, R. (2025). Project HF-EOLUS. Task 2. Obtaining Radial Metrics from INTECMAR's VILA and PRIO Stations' Spectra. (v1.0.0). Zenodo. https://doi.org/10.5281/zenodo.16679609, This work has been funded by the HF-EOLUS project (TED2021-129551B-I00), financed by MICIU/AEI /10.13039/501100011033 and by the European Union NextGenerationEU/PRTR - BDNS 598843 - Component 17 - Investment I3, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Project HF‑EOLUS. Task 2. Sentinel‑1 SAR Derived Data Bundle (GeoParquet + STAC) (Version 1)

  • Herrera, Juan L.
  • Fernández Baladrón, Adrián
  • Rosón, Gabriel
  • Gilcoto, Miguel
  • Dubert, Jesús
  • Varela, Ramiro
[Contents of this record] - hf_eolus_sar.tar.gz: Tarball containing the processed data outputs. It includes the partitioned GeoParquet dataset (OGC GeoParquet v1.1 metadata) and a static STAC catalog (Collection and Items with the STAC Table Extension and Processing metadata) describing the Parquet assets. - pipeline.sh: The exact sequence of commands used to generate this dataset (download and ingestion), serving as an executable provenance log for reproducibility. - stac_properties_collection.json: STAC property definitions/templates applied at Collection level during catalog generation. - stac_properties_item.json: STAC property definitions/templates applied at Item level during catalog generation. - scripts/*.sql (e.g., scripts/athena_create_table.sql): SQL statements used for registering the resulting Parquet dataset as an external table (e.g., in AWS Athena) and for validating schema/partitions. - scripts/downloaded_files.txt: Manifest listing the Sentinel‑1 OCN product identifiers that were downloaded and used as inputs. - scripts/area_boundary.geojson: Area of Interest (AOI) polygon used to spatially constrain the search and download of Sentinel‑1 scenes. - scripts/files_to_download.csv: Input list and/or search results for Sentinel‑1 OCN products targeted by the download stage (includes product IDs and acquisition metadata), [Reproducibility and re‑execution] - Software pipeline: HF‑EOLUS Sentinel‑1 SAR Ingestion Pipeline (https://doi.org/10.5281/zenodo.17011823). The pipeline uses Dockerized R and Python environments for deterministic runs (no manual dependency setup required). - How to re‑run: Review pipeline.sh to see the exact commands, arguments, and environment variables used. If desired, clone the referenced pipeline repository, ensure Docker is available, and re‑execute the same steps. The AOI and time range used are captured in scripts/area_boundary.geojson and scripts/files_to_download.csv; the precise upstream inputs are listed in scripts/downloaded_files.txt. - Optional cloud registration: The SQL files in scripts/ can be used to register the resulting Parquet dataset in AWS Athena (or adapted for other engines like Trino/Spark). This step is optional and not required to read the Parquet files directly with tools such as Python (pyarrow/GeoPandas), R (arrow), or DuckDB. - Copernicus credentials: To re‑download Sentinel‑1 OCN data, provide your own Copernicus Data Space Ecosystem account credentials. Create a plain‑text file (e.g., `credentials`) with one line containing your key and pass its path via `--credentials-file` to `scripts/download_sar.sh`. For account and API access information, see https://dataspace.copernicus.eu and the documentation at https://documentation.dataspace.copernicus.eu/, [Data format and standards] - GeoParquet: Columnar, compressed Parquet files with OGC GeoParquet v1.1 geospatial metadata (geometry column, CRS, encoding). Files are partitioned to support efficient filtering and scalable analytics. - STAC: A static STAC Collection with Items describes each Parquet asset, including schema via the STAC Table Extension and lineage via Processing metadata. The catalog is suitable for static hosting and is interoperable with common STAC tooling., [Provenance and upstream data] - Upstream source: Copernicus Sentinel‑1 SAR Level‑2 OCN (OWI) products provided by the European Space Agency (ESA) under the Copernicus Programme. The list of specific input products for this dataset is included in scripts/downloaded_files.txt. - Processing: All derivations (extraction of ocean wind variables, conversion to GeoParquet, and STAC catalog creation) were performed by the HF‑EOLUS pipeline referenced above. The sequence is captured verbatim in pipeline.sh. - Credit line: Contains modified Copernicus Sentinel‑1 data; we gratefully acknowledge the Copernicus Programme and the European Space Agency (ESA) for providing free and open Sentinel‑1 data., [Usage notes] - Local analysis: The GeoParquet files can be opened directly with Python (pyarrow, pandas/GeoPandas), R (arrow), or SQL engines (DuckDB/Trino) without additional ingestion steps. - Catalog discovery: The STAC catalog in the tarball is static and can be browsed with STAC tools or published on object storage or a simple web server. - AWS/Athena setup (optional): To use the GeoParquet in AWS, upload the dataset to Amazon S3 and adjust the SQL to your paths and names, then execute in Athena: 1) Upload the GeoParquet (and optionally the STAC catalog) to `s3://<your-bucket>/<your-prefix>/` preserving the folder structure. 2) Edit `scripts/athena_create_table.sql` to set the `LOCATION` to your S3 path and customize the database and table (e.g., change `SAR_INGEST.SAR` to `MY_DB.MY_TABLE`). 3) In Athena, run the SQL to create the database (if needed) and the external table. 4) Load partitions with `MSCK REPAIR TABLE MY_DB.MY_TABLE;` (or add partitions explicitly) and validate with a quick query such as `SELECT COUNT(*) FROM MY_DB.MY_TABLE;`., This record packages a reproducible bundle of derived ocean wind data and auxiliary materials produced from Copernicus Sentinel‑1 SAR Level‑2 OCN (OWI) products. The bundle contains the processed dataset as a GeoParquet data lake with a static STAC catalog, together with the exact scripts, configuration, SQL statements, and inputs used to generate it. It is intended to enable full transparency, re‑use, and re‑execution of the data generation workflow. The dataset was generated using the HF‑EOLUS Sentinel‑1 SAR Ingestion Pipeline (software record DOI: https://doi.org/10.5281/zenodo.17011823), which automates download and ingestion into partitioned GeoParquet, and builds a STAC Collection and Items describing the outputs. This record includes all relevant artifacts so that other researchers can verify the steps, inspect lineage, and rerun the pipeline if needed, This work has been funded by the HF‑EOLUS project (TED2021‑129551B‑I00), financed by MICIU/AEI /10.13039/501100011033 and by the European Union NextGenerationEU/PRTR - BDNS 598843 - Component 17 - Investment I3, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Project HF‑EOLUS. Task 1. Sentinel‑1 SAR Derived Data Bundle (GeoParquet + STAC) (Version 2)

  • Herrera, Juan L.
  • Fernández Baladrón, Adrián
  • Rosón, Gabriel
  • Gilcoto, Miguel
  • Dubert, Jesús
  • Varela, Ramiro
[Contents of this record] - hf_eolus_sar.tar.gz: Tarball containing the processed data outputs. It includes the partitioned GeoParquet dataset (OGC GeoParquet v1.1 metadata) and a static STAC catalog (Collection and Items with the STAC Table Extension and Processing metadata) describing the Parquet assets. - pipeline.sh: The exact sequence of commands used to generate this dataset (download and ingestion), serving as an executable provenance log for reproducibility. - stac_properties_collection.json: STAC property definitions/templates applied at Collection level during catalog generation. - stac_properties_item.json: STAC property definitions/templates applied at Item level during catalog generation. - scripts/*.sql (e.g., scripts/athena_create_table.sql): SQL statements used for registering the resulting Parquet dataset as an external table (e.g., in AWS Athena) and for validating schema/partitions. - scripts/downloaded_files.txt: Manifest listing the Sentinel‑1 OCN product identifiers that were downloaded and used as inputs. - scripts/VILA_PRIO_hull.json: Area of Interest (AOI) polygon used to constrain the search and download of Sentinel‑1 scenes spatially. This file defines a convex hull bounding the intersection between the areas covering the echos of VILA and PRIO stations. - scripts/files_to_download.csv: Input list and/or search results for Sentinel‑1 OCN products targeted by the download stage (includes product IDs and acquisition metadata)., [Reproducibility and re‑execution] - Software pipeline: HF‑EOLUS Sentinel‑1 SAR Ingestion Pipeline (https://doi.org/10.5281/zenodo.17011823). The pipeline uses Dockerized R and Python environments for deterministic runs (no manual dependency setup required). - How to re‑run: Review pipeline.sh to see the exact commands, arguments, and environment variables used. If desired, clone the referenced pipeline repository, ensure Docker is available, and re‑execute the same steps. The AOI and time range used are captured in scripts/area_boundary.geojson and scripts/files_to_download.csv; the precise upstream inputs are listed in scripts/downloaded_files.txt. - Optional cloud registration: The SQL files in scripts/ can be used to register the resulting Parquet dataset in AWS Athena (or adapted for other engines like Trino/Spark). This step is optional and not required to read the Parquet files directly with tools such as Python (pyarrow/GeoPandas), R (arrow), or DuckDB. - Copernicus credentials: To re‑download Sentinel‑1 OCN data, provide your own Copernicus Data Space Ecosystem account credentials. Create a plain‑text file (e.g., `credentials`) with one line containing your key and pass its path via `--credentials-file` to `scripts/download_sar.sh`. For account and API access information, see https://dataspace.copernicus.eu and the documentation at https://documentation.dataspace.copernicus.eu/, [Data format and standards] - GeoParquet: Columnar, compressed Parquet files with OGC GeoParquet v1.1 geospatial metadata (geometry column, CRS, encoding). Files are partitioned to support efficient filtering and scalable analytics. - STAC: A static STAC Collection with Items describes each Parquet asset, including schema via the STAC Table Extension and lineage via Processing metadata. The catalog is suitable for static hosting and is interoperable with common STAC tooling., [Provenance and upstream data] - Upstream source: Copernicus Sentinel‑1 SAR Level‑2 OCN (OWI) products provided by the European Space Agency (ESA) under the Copernicus Programme. The list of specific input products for this dataset is included in scripts/downloaded_files.txt. - Processing: All derivations (extraction of ocean wind variables, conversion to GeoParquet, and STAC catalog creation) were performed by the HF‑EOLUS pipeline referenced above. The sequence is captured verbatim in pipeline.sh. - Credit line: Contains modified Copernicus Sentinel‑1 data; we gratefully acknowledge the Copernicus Programme and the European Space Agency (ESA) for providing free and open Sentinel‑1 data., [Usage notes] - Local analysis: The GeoParquet files can be opened directly with Python (pyarrow, pandas/GeoPandas), R (arrow), or SQL engines (DuckDB/Trino) without additional ingestion steps. - Catalog discovery: The STAC catalog in the tarball is static and can be browsed with STAC tools or published on object storage or a simple web server. - AWS/Athena setup (optional): To use the GeoParquet in AWS, upload the dataset to Amazon S3 and adjust the SQL to your paths and names, then execute in Athena: 1) Upload the GeoParquet (and optionally the STAC catalog) to `s3://<your-bucket>/<your-prefix>/` preserving the folder structure. 2) Edit `scripts/athena_create_table.sql` to set the `LOCATION` to your S3 path and customize the database and table (e.g., change `SAR_INGEST.SAR` to `MY_DB.MY_TABLE`). 3) In Athena, run the SQL to create the database (if needed) and the external table. 4) Load partitions with `MSCK REPAIR TABLE MY_DB.MY_TABLE;` (or add partitions explicitly) and validate with a quick query such as `SELECT COUNT(*) FROM MY_DB.MY_TABLE;`., This record packages a reproducible bundle of derived ocean wind data and auxiliary materials produced from Copernicus Sentinel‑1 SAR Level‑2 OCN (OWI) products. The bundle contains the processed dataset as a GeoParquet data lake with a static STAC catalog, together with the exact scripts, configuration, SQL statements, and inputs used to generate it. It is intended to enable full transparency, re‑use, and re‑execution of the data generation workflow. The dataset was generated using the HF‑EOLUS Sentinel‑1 SAR Ingestion Pipeline (software record DOI: https://doi.org/10.5281/zenodo.17011823), which automates download and ingestion into partitioned GeoParquet, and builds a STAC Collection and Items describing the outputs. This record includes all relevant artifacts so that other researchers can verify the steps, inspect lineage, and rerun the pipeline if needed, This work has been funded by the HF‑EOLUS project (TED2021‑129551B‑I00), financed by MICIU/AEI /10.13039/501100011033 and by the European Union NextGenerationEU/PRTR - BDNS 598843 - Component 17 - Investment I3, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Project HF‑EOLUS. Task 1. Sentinel‑1 SAR Derived Data Bundle (GeoParquet + STAC) (Version 3)

  • Herrera, Juan L.
  • Fernández Baladrón, Adrián
  • Rosón, Gabriel
  • Gilcoto, Miguel
  • Dubert, Jesús
  • Varela, Ramiro
[Contents of this record] - hf_eolus_sar.tar.gz: Tarball containing the processed data outputs. It includes the partitioned GeoParquet dataset (OGC GeoParquet v1.1 metadata) and a static STAC catalog (Collection and Items with the STAC Table Extension and Processing metadata) describing the Parquet assets. - pipeline.sh: The exact sequence of commands used to generate this dataset (download and ingestion), serving as an executable provenance log for reproducibility. - stac_properties_collection.json: STAC property definitions/templates applied at Collection level during catalog generation. - stac_properties_item.json: STAC property definitions/templates applied at Item level during catalog generation. - scripts/*.sql (e.g., scripts/athena_create_table.sql): SQL statements used for registering the resulting Parquet dataset as an external table (e.g., in AWS Athena) and for validating schema/partitions. - scripts/downloaded_files.txt: Manifest listing the Sentinel‑1 OCN product identifiers that were downloaded and used as inputs. - scripts/VILA_PRIO_hull.json: Area of Interest (AOI) polygon used to constrain the search and download of Sentinel‑1 scenes spatially. This file defines a convex hull bounding the intersection between the areas covering the echos of VILA and PRIO stations. - scripts/files_to_download.csv: Input list and/or search results for Sentinel‑1 OCN products targeted by the download stage (includes product IDs and acquisition metadata)., [Reproducibility and re‑execution] - Software pipeline: HF‑EOLUS Sentinel‑1 SAR Ingestion Pipeline (https://doi.org/10.5281/zenodo.17011823). The pipeline uses Dockerized R and Python environments for deterministic runs (no manual dependency setup required). - How to re‑run: Review pipeline.sh to see the exact commands, arguments, and environment variables used. If desired, clone the referenced pipeline repository, ensure Docker is available, and re‑execute the same steps. The AOI and time range used are captured in scripts/area_boundary.geojson and scripts/files_to_download.csv; the precise upstream inputs are listed in scripts/downloaded_files.txt. - Optional cloud registration: The SQL files in scripts/ can be used to register the resulting Parquet dataset in AWS Athena (or adapted for other engines like Trino/Spark). This step is optional and not required to read the Parquet files directly with tools such as Python (pyarrow/GeoPandas), R (arrow), or DuckDB. - Copernicus credentials: To re‑download Sentinel‑1 OCN data, provide your own Copernicus Data Space Ecosystem account credentials. Create a plain‑text file (e.g., `credentials`) with one line containing your key and pass its path via `--credentials-file` to `scripts/download_sar.sh`. For account and API access information, see https://dataspace.copernicus.eu and the documentation at https://documentation.dataspace.copernicus.eu/, [Data format and standards] - GeoParquet: Columnar, compressed Parquet files with OGC GeoParquet v1.1 geospatial metadata (geometry column, CRS, encoding). Files are partitioned to support efficient filtering and scalable analytics. - STAC: A static STAC Collection with Items describes each Parquet asset, including schema via the STAC Table Extension and lineage via Processing metadata. The catalog is suitable for static hosting and is interoperable with common STAC tooling., [Provenance and upstream data] - Upstream source: Copernicus Sentinel‑1 SAR Level‑2 OCN (OWI) products provided by the European Space Agency (ESA) under the Copernicus Programme. The list of specific input products for this dataset is included in scripts/downloaded_files.txt. - Processing: All derivations (extraction of ocean wind variables, conversion to GeoParquet, and STAC catalog creation) were performed by the HF‑EOLUS pipeline referenced above. The sequence is captured verbatim in pipeline.sh. - Credit line: Contains modified Copernicus Sentinel‑1 data; we gratefully acknowledge the Copernicus Programme and the European Space Agency (ESA) for providing free and open Sentinel‑1 data., This record packages a reproducible bundle of derived ocean wind data and auxiliary materials produced from Copernicus Sentinel‑1 SAR Level‑2 OCN (OWI) products. The bundle contains the processed dataset as a GeoParquet data lake with a static STAC catalog, together with the exact scripts, configuration, SQL statements, and inputs used to generate it. It is intended to enable full transparency, re‑use, and re‑execution of the data generation workflow. The dataset was generated using the HF‑EOLUS Sentinel‑1 SAR Ingestion Pipeline (software record DOI: https://doi.org/10.5281/zenodo.17011823), which automates download and ingestion into partitioned GeoParquet, and builds a STAC Collection and Items describing the outputs. This record includes all relevant artifacts so that other researchers can verify the steps, inspect lineage, and rerun the pipeline if needed, This work has been funded by the HF‑EOLUS project (TED2021‑129551B‑I00), financed by MICIU/AEI /10.13039/501100011033 and by the European Union NextGenerationEU/PRTR - BDNS 598843 - Component 17 - Investment I3, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Project HF-EOLUS. Task 2. Aggregated SAR and HF-Radar Radial Metrics for Wind-Inversion Model Training (Version 1)

  • Herrera, Juan L.
  • Fernández Baladrón, Adrián
  • Rosón, Gabriel
  • Gilcoto, Miguel
  • Dubert, Jesús
  • Varela, Ramiro
18 files, This record presents the results obtained by applying the open, reproducible workflow described in HF-EOLUS Geospatial Processing Tools to the HF-EOLUS Sentinel‑1 SAR Derived Data Bundle and to the VILA & PRIO Radial Metrics GeoParquet datasets. It provides analysis-ready geospatial data products generated to train HF-Radar wind-inversion models. HF-EOLUS Geospatial Processing Tools documents the methodology, software environment, and parameterization; the dataset records contain the data used as input. This record includes the concrete outputs for reuse and citation. Wind-inversion models are trained using supervised learning methods. In the HF-EOLUS project, we tackle this task as a regression problem where, given a set of features (HF-Radar data), we train a model to predict a numerical output (wind speed and direction). Due to the dense nature of the SAR and HF-Radar data and that they are not initially co-located, we need to aggregate them into a grid that allows us to get paired time-series of HF-Radar input <-> SAR output on a grid. HF-EOLUS Geospatial Processing Tools provides a workflow that we use here to 1) compute the coverage area of the HF-Radar data, 2) build a regular grid inside that area, 3) map each SAR and HF-Radar record into that grid, 4) aggregate the features and outputs into time-series for each node in the grid, 5) standarize the result for easy access and downstream analysis, This work has been funded by the HF-EOLUS project (TED2021-129551B-I00), financed by MICIU/AEI /10.13039/501100011033 and by the European Union NextGenerationEU/PRTR - BDNS 598843 - Component 17 - Investment I3, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Project HF-EOLUS. Task 2. Aggregated SAR and HF-Radar Radial Metrics for Wind-Inversion Model Training (Version 2)

  • Herrera, Juan L.
  • Fernández Baladrón, Adrián
  • Rosón, Gabriel
  • Gilcoto, Miguel
  • Dubert, Jesús
  • Varela, Ramiro
21 files, This record presents the results obtained by applying the open, reproducible workflow described in HF-EOLUS Geospatial Processing Tools to the HF-EOLUS Sentinel‑1 SAR Derived Data Bundle and to the VILA & PRIO Radial Metrics GeoParquet datasets. It provides analysis-ready geospatial data products generated to train HF-Radar wind-inversion models. HF-EOLUS Geospatial Processing Tools documents the methodology, software environment, and parameterization; the dataset records contain the data used as input. This record includes the concrete outputs for reuse and citation., Wind-inversion models are trained using supervised learning methods. In the HF-EOLUS project, we tackle this task as a regression problem where, given a set of features (HF-Radar data), we train a model to predict a numerical output (wind speed and direction). Due to the dense nature of the SAR and HF-Radar data and that they are not initially co-located, we need to aggregate them into a grid that allows us to get paired time-series of HF-Radar input <-> SAR output on a grid. HF-EOLUS Geospatial Processing Tools provides a workflow that we use here to 1) compute the coverage area of the HF-Radar data, 2) build a regular grid inside that area, 3) map each SAR and HF-Radar record into that grid, 4) aggregate the features and outputs into time-series for each node in the grid, 5) standarize the result for easy access and downstream analysis. For convenience, the pipeline.sh script implements all the steps described below, This work has been funded by the HF-EOLUS project (TED2021-129551B-I00), financed by MICIU/AEI /10.13039/501100011033 and by the European Union NextGenerationEU/PRTR - BDNS 598843 - Component 17 - Investment I3, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Project HF-EOLUS. Task 2. VILA & PRIO Radial Metrics GeoParquet Dataset, Derived from LLUV datasets and ingested in GeoParquet format

  • Herrera, Juan L.
  • Fernández Baladrón, Adrián
  • Rosón, Gabriel
  • Gilcoto, Miguel
  • Dubert, Jesús
  • Varela, Ramiro
The LLUV inputs used for ingestion are archived at https://doi.org/10.5281/zenodo.16528652 and https://doi.org/10.5281/zenodo.16458693. First, these LLUV files were uploaded to AWS S3; the included pipeline.sh then orchestrates their processing: AWS Glue parses LLUV into partitioned Parquet, Athena registers external tables, and STAC JSON is generated. The STAC property templates applied during generation, stac_properties_collection.json and stac_properties_item.json, are bundled for transparency and reuse. After unpacking, open hf_ingestion/catalog.json with a STAC client to browse collections and items. Parquet assets are partitioned by pos_bragg and hourly timestamp; geometries are WKB points in WGS84 stored in the geometry column (example fields include Pwr and VELO). Total number of rows (radar echoes) in the radial_metrics datasets: VILA: 347,275,384 PRIO: 240,847,334, Access to zip file: https://zenodo.org/records/16892223, This record publishes the outputs of the HF‑EOLUS HF‑radar radial metrics ingestion pipeline, produced with the HF‑EOLUS ingestion code (https://doi.org/10.5281/zenodo.17071947), as a single archive: hf_eolus_hf_ingestion.tar.gz. It contains a STAC 1.1 catalog for stations VILA and PRIO (collections HF‑Radar‑VILA1..4 and HF‑Radar‑PRIO1..2; VILA: 2011‑09–2023‑05; PRIO: 2011‑08–2015‑04 and 2018‑05–2023‑11) and GeoParquet v1.1 datasets for radial metrics (radial_metrics/), header (header/), and range summaries (rng_info/)., This work has been funded by the HF-EOLUS project (TED2021-129551B-I00), financed by MICIU/AEI /10.13039/501100011033 and by the European Union NextGenerationEU/PRTR - BDNS 598843 - Component 17 - Investment I3, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

HF-EOLUS. Task 3. MeteoGalicia Wind Interpolation Outputs (Version 1)

  • Herrera, Juan L.
  • Fernández Baladrón, Adrián
  • Rosón, Gabriel
  • Gilcoto, Miguel
  • Dubert, Jesús
  • Varela, Ramiro
This record packages the reference outputs for the HF-EOLUS Task 3 interpolation experiment over the Vilano HF-radar footprint (open Atlantic, NW Iberia). The dataset was produced with the hf-eolus-interpolation-toolkit (Herrera Cortijo et al., 2025) by ingesting MeteoGalicia's historical WRF_HIST d03 (4 km) winds, refining the grid by a factor of eight, fitting kriging/IDW models and exporting the resulting GeoParquet layers together with metadata, plots and buoy comparisons. All counts and metrics below were recomputed with duckdb/duckdb:latest (Docker) over the committed assets in March 2025 so the README reflects the current state of the case study, This work has been funded by the HF-EOLUS project (TED2021-129551B-I00), financed by MICIU/AEI /10.13039/501100011033 and by the European Union NextGenerationEU/PRTR - BDNS 598843 - Component 17 - Investment I3, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

HF-EOLUS. Task 3. MeteoGalicia Wind Interpolation Outputs (Version 2)

  • Herrera, Juan L.
  • Fernández Baladrón, Adrián
  • Rosón, Gabriel
  • Gilcoto, Miguel
  • Dubert, Jesús
  • Varela, Ramiro
Due to file size and number-of-files restrictions, the dataset has not been uploaded as a single zipped folder. Please copy all the files into a folder and decompress them, then move catalog.json and the contents of the buoy file into a catalogs folder to reproduce the original dataset layout, This record packages the reference outputs for the HF-EOLUS Task 3 interpolation experiment over the Vilano HF-radar footprint (open Atlantic, NW Iberia). The dataset was produced with the hf-eolus-interpolation-toolkit (Herrera Cortijo et al., 2025) by ingesting MeteoGalicia's historical WRF_HIST d03 (4 km) winds, refining the grid by a factor of eight, fitting kriging/IDW models and exporting the resulting GeoParquet layers together with metadata, plots and buoy comparisons. All counts and metrics below were recomputed with duckdb/duckdb:latest (Docker) over the committed assets in March 2025 so the README reflects the current state of the case stud, This work has been funded by the HF-EOLUS project (TED2021-129551B-I00), financed by MICIU/AEI /10.13039/501100011033 and by the European Union NextGenerationEU/PRTR - BDNS 598843 - Component 17 - Investment I3, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

HF-EOLUS. Task 3. MeteoGalicia Wind Interpolation Outputs (Version 3)

  • Herrera, Juan L.
  • Fernández Baladrón, Adrián
  • Rosón, Gabriel
  • Gilcoto, Miguel
  • Dubert, Jesús
  • Varela, Ramiro
2 files, This record packages inputs, documentation, scripts and results for the HF-EOLUS Task 3 interpolation experiment over the Vilano HF-radar footprint (open Atlantic, NW Iberia; radar context in [1]). The dataset was produced with the hf-eolus-interpolation-toolkit [2] by ingesting MeteoGalicia's historical WRF_HIST d03 (4 km) winds, refining the grid by a factor of four (native 4 km → ~1 km effective resolution), fitting kriging/IDW models and exporting the resulting GeoParquet layers together with metadata, plots and comparisons against the Puertos del Estado Vilano buoy. Due to size, the interpolation outputs live in two Zenodo supplements; this record points to those packages while keeping the case assets, This work has been funded by the HF-EOLUS project (TED2021-129551B-I00), financed by MICIU/AEI /10.13039/501100011033 and by the European Union NextGenerationEU/PRTR - BDNS 598843 - Component 17 - Investment I3, Peer reviewed