Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 127
Encontrada(s) 2 página(s)

DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

J-PLUS: Discovery and characterisation of ultracool dwarfs using Virtual Observatory tools

  • Solano, Enrique
  • Martín, Eduardo L.
  • Caballero, J. A.
  • Rodrigo, C.
  • Angulo, R. E.
  • Alcaniz, J. S.
  • Borges Fernandes, M.
  • Cenarro, A. J.
  • Cristóbal Hornillos, D.
  • Dupke, R. A.
  • Alfaro, Emilio J.
  • Ederoclite, A.
  • Jiménez Esteban, F. M.
  • Hernández Jiménez, J. A.
  • Hernández Monteagudo, C.
  • Lopes de Oliveira, R.
  • López Sanjuan, C.
  • Marín Franch, A.
  • Mendes de Oliveira, Claudia L.
  • Moles, M.
  • Orsi, Álvaro A.
  • Schmidtobreick, L.
  • Sobral, D.
  • Sodré, L.
  • Varela, J.
  • Vázquez Ramió, H.
Context. Ultracool dwarfs are objects with spectral types equal to or later than M7. Most of them have been discovered using wide-field imaging surveys. The Virtual Observatory has proven to be very useful for efficiently exploiting these astronomical resources. Aims. We aim to validate a Virtual Observatory methodology designed to discover and characterise ultracool dwarfs in the J-PLUS photometric survey. J-PLUS is a multiband survey carried out with the wide-angle T80Cam optical camera mounted on the 0.83 m telescope JAST/T80 in the Observatorio Astrofísico de Javalambre. We make use of the Internal Data Release covering 528 deg2. Methods. We complemented J-PLUS photometry with other catalogues in the optical and infrared using VOSA, a Virtual Observatory tool that estimates physical parameters from the spectral energy distribution fitting to collections of theoretical models. Objects identified as ultracool dwarfs were distinguished from background M giants and highly reddened stars using parallaxes and proper motions from Gaia DR2. Results. We identify 559 ultracool dwarfs, ranging from i = 16.2 mag to i = 22.4 mag, of which 187 are candidate ultracool dwarfs not previously reported in the literature. This represents an increase in the number of known ultracool dwarfs of about 50% in the region of the sky we studied, particularly at the faint end of our sensitivity, which is interesting as reference for future wide and deep surveys such as Euclid. Three candidates are interesting targets for exoplanet surveys because of their proximity (distances less than 40 pc). We also analysed the kinematics of ultracool dwarfs in our catalogue and found evidence that it is consistent with a Galactic thin-disc population, except for six objects that might be members of the thick disc. Conclusion. The results we obtained validate the proposed methodology, which will be used in future J-PLUS and J-PAS releases. Considering the region of the sky covered by the Internal Data Release used in this work, we estimate that 3000–3500 new ultracool dwarfs will be discovered at the end of the J-PLUS project., We thank our referee, Zenghua Zhang, for his constructive suggestions. We warmly thank the J-PLUS collaboration, in particular, S. Akras, A. Alvarez, P. Coelho, and V. Placco for constructive comments that helped to improve the presentation of the results. We acknowledge use of the ADS bibliographic services. This research has made use of the Aladin sky atlas developed at CDS, Strasbourg Observatory, France. This publication makes use of VOSA, developed under the Spanish Virtual Observatory project supported from the Spanish MINECO through grant AyA2017-84089. This work has made use of data from the European Space Agency (ESA) mission Gaia, processed by the Gaia Data Processing and Analysis Consortium (DPAC). We also extensively made use of the Vizier and SIMBAD services, both operated at CDS, Strasbourg, France. Funding for the J-PLUS Project has been provided by the Governments of Spain and Aragón through the Fondo de Inversiones de Teruel, the Spanish Ministry of Economy and Competitiveness (MINECO; under grants AYA2015-66211-C2-1-P, AYA2015-66211-C2-2, AyA2012-30789 and ICTS-2009-14), and European FEDER funding (FCDD10-4E-867, FCDD13-4E-2685). The Brazilian agencies FAPERJ and FAPESP as well as the National Observatory of Brazil have also contributed to this project. RAD acknowledges support from CNPq through BP grant 312307/2015-2, CSIC through grant COOPB20263, FINEP grants REF. R 1217/13 – 01.13.0279.00 and REF 0859/10 – 01.10.0663.00 for hardware support for the J-PLUS project through the National Observatory of Brazil. E. L. Martín acknowledges support from project AYA2015-69350-C3-1-P. J. A. Hernandez-Jimenez thanks to Brazilian institution CNPq (project 150237/2017-0) and Chilean institution CONICYT through Programa de Astronomía, Fondo ALMA-CONICYT 2017 (project 31170038). R. Lopes was partially supported by the Brazilian agency CNPq (PQ 302037/2015-2 and PDE 200289/2017-9). F. J. E. acknowledges financial support from the ASTERICS project (ID:653477, H2020-EU.1.4.1.1. Developing new world-class research infrastructures). This work is based on observations made with the JAST/ T80 telescope at the Observatorio Astrofísico de Javalambre (OAJ) in Teruel, owned, managed and operated by the Centro de Estudios de Física del Cosmos de Aragón. We thank the OAJ Data Processing and Archiving Unit (UPAD) for reducing and calibrating the OAJ data used in this work; With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (MDM-2017-0737)., Peer review
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

J-PLUS: The Javalambre Photometric Local Universe Survey

  • Cenarro, A. J.
  • Moles, M.
  • Cristóbal Hornillos, D.
  • Marín Franch, A.
  • Ederoclite, A.
  • Varela, J.
  • López Sanjuan, C.
  • Hernández Monteagudo, C.
  • Angulo, R. E.
  • Vázquez Ramió, H.
  • Viironen, K.
  • Díaz Martín, M. C.
  • Beers, T. C.
  • Domínguez Martínez, M.
  • Rueda Teruel, F.
  • Garzarán Calderaro, J.
  • Iñiguez, C.
  • Tilve, V.
  • Jiménez Ruiz, J. M.
  • Lasso Cabrera, N.
  • Alcaniz, J. S.
  • Mendes de Oliveira, Claudia L.
  • López Alegre, G.
  • Muniesa, D. J.
  • Lopes de Oliveira, R.
  • Tamm, A.
  • Rodríguez Llano, S.
  • Rueda Teruel, S.
  • Akras, S.
  • Alfaro, Emilio J.
  • Soriano Laguía, I.
  • Valdivielso, L.
  • Lyman, J. D.
  • Beasley, M. A.
  • Borges Fernandes, M.
  • Yanes Díaz, A.
  • Sodré, L.
  • Carrasco, J. M.
  • Coelho, P. R. T.
  • Xavier, H. S.
  • Costa Duarte, M. V.
  • Abramo, L. R.
  • Álvarez Candal, A.
  • Galarza, A.
  • Galbany, L.
  • Ascaso, B.
  • Bruzual, G.
  • González Serrano, J. I.
  • Gutiérrez Soto, L. A.
  • Buzzo, M. L.
  • Cepa, J.
  • Kuncarayakti, H.
  • Landim, R. C. G.
  • Cortesi, A.
  • De Prá, M.
  • Orsi, Álvaro A.
  • Lima Neto, G. B.
  • Maíz Apellániz, J.
  • Favole, G.
  • García, K.
  • Nogueira Cavalcante, J. P.
  • González Delgado, R. M.
  • Hernández Jiménez, J. A.
  • Oteo Gómez, I.
  • Kanaan, A.
  • Laur, J.
  • Rebassa-Mansergas, A.
  • Reis, R. R. R.
  • Lincandro, J.
  • Miralda Escudé, J.
  • Salvador Rusiñol, N.
  • Sampedro, L.
  • Morate, D.
  • Novais, P. M.
  • Schmidtobreick, L.
  • Siffert, B. B.
  • Oncins, M.
  • Overzier, R. A.
  • Molino, A.
  • Bonoli, S.
  • Hurier, G.
  • Pereira, C. B.
  • Roig, F.
  • Vilella-Rojo, G.
  • Sako, M.
  • Sánchez Blázquez, Patricia
  • Gurung López, S.
  • Santos, W. A.
  • Telles, E.
  • Allende Prieto, C.
  • Bonatto, C.
  • Vilchez, J. M.
  • San Roman, I.
  • Daflon, S.
  • Dupke, R. A.
  • Greisel, N.
  • Díaz García, L. A.
  • Jiménez Teja, Y.
  • Placco, V. M.
  • Logroño García, R.
  • Spinoso, D.
  • Maícas, N.
  • Izquierdo Villalba, D.
  • Abril, J.
  • Aguerri, J. A. L.
  • Carvano, J. M.
  • Bielsa de Toledo, S.
  • Chies Santos, A. L.
  • Falcón Barroso, J.
  • Civera, T.
  • Gonçalves, D. R.
  • Solano, Enrique
  • Hernández Fuertes, J.
  • Iglesias Marzoa, R.
  • Whitten, D. D.
  • Antón, J. L.
  • Kruuse, K.
  • Lamadrid, J. L.
  • Bello, R.
  • Castillo Ramírez, J.
  • López Sainz, A.
  • Moreno Signes, A.
  • Chueca, S.
The Javalambre Photometric Local Universe Survey (J-PLUS ) is an ongoing 12-band photometric optical survey, observing thousands of square degrees of the Northern Hemisphere from the dedicated JAST/T80 telescope at the Observatorio Astrofísico de Javalambre (OAJ). The T80Cam is a camera with a field of view of 2 deg2 mounted on a telescope with a diameter of 83 cm, and is equipped with a unique system of filters spanning the entire optical range (3500–10 000 Å). This filter system is a combination of broad-, medium-, and narrow-band filters, optimally designed to extract the rest-frame spectral features (the 3700–4000 Å Balmer break region, Hδ, Ca H+K, the G band, and the Mg b and Ca triplets) that are key to characterizing stellar types and delivering a low-resolution photospectrum for each pixel of the observed sky. With a typical depth of AB ∼21.25 mag per band, this filter set thus allows for an unbiased and accurate characterization of the stellar population in our Galaxy, it provides an unprecedented 2D photospectral information for all resolved galaxies in the local Universe, as well as accurate photo-z estimates (at the δ z/(1 + z)∼0.005–0.03 precision level) for moderately bright (up to r ∼ 20 mag) extragalactic sources. While some narrow-band filters are designed for the study of particular emission features ([O II]/λ3727, Hα/λ6563) up to z <  0.017, they also provide well-defined windows for the analysis of other emission lines at higher redshifts. As a result, J-PLUS has the potential to contribute to a wide range of fields in Astrophysics, both in the nearby Universe (Milky Way structure, globular clusters, 2D IFU-like studies, stellar populations of nearby and moderate-redshift galaxies, clusters of galaxies) and at high redshifts (emission-line galaxies at z ≈ 0.77, 2.2, and 4.4, quasi-stellar objects, etc.). With this paper, we release the first ∼1000 deg2 of J-PLUS data, containing about 4.3 million stars and 3.0 million galaxies at r <  21 mag. With a goal of 8500 deg2 for the total J-PLUS footprint, these numbers are expected to rise to about 35 million stars and 24 million galaxies by the end of the survey., Funding for the J-PLUS Project has been provided by the Governments of Spain and Aragon through the Fondo de Inversiones de Teruel, by the Spanish Ministry of Economy and Competitiveness (MINECO; under grants AYA2012-30789, AYA2013-40611-P, AYA2015-66211-C2-1-P, AYA2015-66211-C2-2, AYA2016-77846-P, AYA2016-77237-C3-1-P, AYA2016-75931-C2-1-P, AYA2017-86274-P, AGAURgrantSGR-661/2017, andICTS-2009-14), byFAPERJ the Government of Aragon, through the Grupo de Investigacion E16_17R, and by European FEDER funding (FCDD10-4E-867, FCDD13-4E-2685). Further support has been provided by the Ramon y Cajal programmes RYC-2016-20254, RYC-2011-08262 and RYC-2011-08529. This research has made use of the Spanish Virtual Observatory (http://svo.cab.inta-csic.es) supported from the Spanish MINECO through grant AYA2014-55216. We also acknowledge Spanish CSIC (I-COOP+ 2016 program) through grant COOPB20263. The Brazilian agencies FAPESP and the National Observatory of Brazil have also contributed to this project. We acknowledge financial support from the Fundacao Carlos Chagas Filho de Amparo a Pesquisa do Estado do Rio de Janeiro - FAPERJ (fellowship Nota 10, PDR-10), from CNPq through BP grant 312307/2015-2 and Universal Grants 459553/20143, PQ 302037/2015-2, and PDE 200289/2017-9), FINEP grants REF. 1217/13 -01.13.0279.00 and REF 0859/10 -01.10.0663.00, from FAPERJ grant E-26/202.835/2016, and CAPES (Science without Borders program, Young Talent Fellowship, BJT) through grants A062/2013 and CAPES-PNPD 2940/2011. The FAPESP grants no. 2015/12745-6, 2014/11338-5, 2014/07684-5, 2013/04582-4 and 2009/54202-8 are also acknowledged. Finally, the authors acknowledge partial support from grant PHY 14-30152; Physics Frontier Center/JINA Center for the Evolution of the Elements (JINA-CEE), awarded by the US National Science Foundation.With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (MDM-2017-0737), Peer review
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

The miniJPAS survey: star-galaxy classification using machine learning

  • Baqui, P. O.
  • Marra, V.
  • Casarini, L.
  • Angulo, R.
  • Díaz García, L. A.
  • Hernández Monteagudo, C.
  • Lopes, P. A. A.
  • López Sanjuan, C.
  • Muniesa, D. J.
  • Placco, V. M.
  • Quartin, M.
  • Queiroz, C.
  • Sobral, D.
  • Solano, Enrique
  • Tempel, E.
  • Varela, J.
  • Vílchez, J. M.
  • Abramo, L. R.
  • Alcaniz, J. S.
  • Benítez, N.
  • Bonoli, S.
  • Carneiro, S.
  • Cenarro, A. J.
  • Cristóbal Hornillos, D.
  • De Amorim, A. L.
  • De Oliveira, C. M.
  • Dupke, R. A.
  • Ederoclite, A.
  • González Delgado, R. M.
  • Marín Franch, A.
  • Moles, M.
  • Vázquez Ramió, H.
  • Sodré, L.
  • Taylor, K.
Full Table 2 is only available at the CDS via anonymous ftp to cdsarc.u-strasbg.fr (130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/cat/J/A+A/645/A87. The catalog is available at http://j-pas.org/datareleases via the ADQL table minijpas.StarGalClass. The ML models are available at github.com/J-PAS-collaboration/StarGalClass-MachineLearning.These authors contributed equally to this work., Context. Future astrophysical surveys such as J-PAS will produce very large datasets, the so-called “big data”, which will require the deployment of accurate and efficient machine-learning (ML) methods. In this work, we analyze the miniJPAS survey, which observed about ∼1 deg2 of the AEGIS field with 56 narrow-band filters and 4 ugri broad-band filters. The miniJPAS primary catalog contains approximately 64 000 objects in the r detection band (magAB ≲ 24), with forced-photometry in all other filters. Aims. We discuss the classification of miniJPAS sources into extended (galaxies) and point-like (e.g., stars) objects, which is a step required for the subsequent scientific analyses. We aim at developing an ML classifier that is complementary to traditional tools that are based on explicit modeling. In particular, our goal is to release a value-added catalog with our best classification. Methods. In order to train and test our classifiers, we cross-matched the miniJPAS dataset with SDSS and HSC-SSP data, whose classification is trustworthy within the intervals 15 ≤ r ≤ 20 and 18.5 ≤ r ≤ 23.5, respectively. We trained and tested six different ML algorithms on the two cross-matched catalogs: K-nearest neighbors, decision trees, random forest (RF), artificial neural networks, extremely randomized trees (ERT), and an ensemble classifier. This last is a hybrid algorithm that combines artificial neural networks and RF with the J-PAS stellar and galactic loci classifier. As input for the ML algorithms we used the magnitudes from the 60 filters together with their errors, with and without the morphological parameters. We also used the mean point spread function in the r detection band for each pointing. Results. We find that the RF and ERT algorithms perform best in all scenarios. When the full magnitude range of 15 ≤ r ≤ 23.5 is analyzed, we find an area under the curve AUC = 0.957 with RF when photometric information alone is used, and AUC = 0.986 with ERT when photometric and morphological information is used together. When morphological parameters are used, the full width at half maximum is the most important feature. When photometric information is used alone, we observe that broad bands are not necessarily more important than narrow bands, and errors (the width of the distribution) are as important as the measurements (central value of the distribution). In other words, it is apparently important to fully characterize the measurement. Conclusions. ML algorithms can compete with traditional star and galaxy classifiers; they outperform the latter at fainter magnitudes (r ≳ 21). We use our best classifiers, with and without morphology, in order to produce a value-added catalog., POB thanks, for financial support, the Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior - Brasil (CAPES) - Finance Code 001. VM thanks CNPq (Brazil) and FAPES (Brazil) for partial financial support. This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 888258. LADG is supported by the Ministry of Science and Technology of Taiwan (grant MOST 106-2628-M-001-003-MY3), and by the Academia Sinica (grant AS-IA-107-M01). ES has been partly supported by the Spanish State Research Agency (AEI) Projects AYA2017-84089 and MDM-2017-0737 at Centro de Astrobiologia (CSIC-INTA), Unidad de Excelencia Maria de Maeztu. MQ is supported by the Brazilian research agencies CNPq and FAPERJ. RGD acknowledges financial support from the State Agency for Research of the Spanish MCIU through the "Center of Excellence Severo Ochoa" award to the Instituto de Astrofisica de Andalucia (SEV-2017-0709) and through the projects AyA2016-77846-P and PID2019-109067GB-100. LS acknowledges support from Brazilian agencies CNPq (grant 304819/2017-4) and FAPESP (grant 2012/00800-4). This work made use of the Virgo Cluster at Cosmo-ufes/UFES, which is funded by FAPES and administrated by Renan Alves de Oliveira. Based on observations made with the JST/T250 telescope and PathFinder camera for the miniJPAS project at the Observatorio Astrofisico de Javalambre (OAJ), in Teruel, owned, managed, and operated by the Centro de Estudios de Fisica del Cosmos de Aragon (CEFCA). We acknowledge the OAJ Data Processing and Archiving Unit (UPAD) for reducing and calibrating the OAJ data used in this work. Funding for OAJ, UPAD, and CEFCA has been provided by the Governments of Spain and Aragon through the Fondo de Inversiones de Teruel; the Aragon Government through the Research Groups E96, E103, and E16_17R; the Spanish Ministry of Science, Innovation and Universities (MCIU/AEI/FEDER, UE) with grant PGC2018-097585-B-C21; the Spanish Ministry of Economy and Competitiveness (MINECO/FEDER, UE) under AYA2015-66211-C2-1-P, AYA2015-66211-C2-2, AYA2012-30789, and ICTS-2009-14; and European FEDER funding (FCDD10-4E-867, FCDD13-4E2685). Based on data from ALHAMBRA Data Access Service the at CAB (CSIC-INTA). Funding for the DEEP2 Galaxy Redshift Survey has been provided by NSF grants AST-95-09298, AST-0071048, AST-0507428, and AST0507483 as well as NASA LTSA grant NNG04GC89G. The Hyper SuprimeCam (HSC) collaboration includes the astronomical communities of Japan and Taiwan, and Princeton University. The HSC instrumentation and software were developed by the National Astronomical Observatory of Japan (NAOJ), the Kavli Institute for the Physics and Mathematics of the Universe (Kavli IPMU), the University of Tokyo, the High Energy Accelerator Research Organization (KEK), the Academia Sinica Institute for Astronomy and Astrophysics in Taiwan (ASIAA), and Princeton University. Funding was contributed by the FIRST program from the Japanese Cabinet O ffice, the Ministry of Education, Culture, Sports, Science and Technology (MEXT), the Japan Society for the Promotion of Science (JSPS), Japan Science and Technology Agency (JST), the Toray Science Foundation, NAOJ, Kavli IPMU, KEK, ASIAA, and Princeton University. This paper makes use of software developed for the Large Synoptic Survey Telescope. We thank the LSST Project for making their code available as free software at dm.lsst.org. This paper is based [in part] on data collected at the Subaru Telescope and retrieved from the HSC data archive system, which is operated by Subaru Telescope and Astronomy Data Center (ADC) at National Astronomical Observatory of Japan. Dpart carried out with the cooperation of Center for Computational Astrophysics (CfCA), National Astronomical Observatory of Japan. Funding for SDSS-III has been provided by the Alfred P. Sloan Foundation, the Participating Institutions, the National Science Foundation, and the U.S. Department of Energy Office of Science. The SDSS-III website is sdss3.org. SDSS-III is managed by the Astrophysical Research Consortium for the Participating Institutions of the SDSS-III Collaboration including the University of Arizona, the Brazilian Participation Group, Brookhaven National Laboratory, Carnegie Mellon University, University of Florida, the French Participation Group, the German Participation Group, Harvard University, the Instituto de Astrofisica de Canarias, the Michigan State/Notre Dame/JINA Participation Group, Johns Hopkins University, Lawrence Berkeley National Laboratory, Max Planck Institute for Astrophysics, Max Planck Institute for Extraterrestrial Physics, New Mexico State University, New York University, Ohio State University, Pennsylvania State University, University of Portsmouth, Princeton University, the Spanish Participation Group, University of Tokyo, University of Utah, Vanderbilt University, University of Virginia, University of Washington, and Yale University., Peerreview
Docta Complutense
Publicación Artículo científico (JournalArticle)

Thin film nanostructuring at oblique angles by substrate patterning

  • Muñoz Piña, S.
  • Alcaide, A.M.
  • Limones Ahijón, B.
  • Oliva Ramírez, M.
  • Rico, V.
  • Alcalá Penadés, Germán
  • González, M.U.
  • García Martín, J.M.
  • Álvarez, R.
  • Wang, D.
  • Schaaf, P.
  • González Elipe, A.R.
  • Palmero, A.
It is demonstrated that, besides classical nanocolumnar arrays, the oblique angle geometry induces the growth of singular structures in the nanoscale when using wisely designed patterned substrates. Well-ordered array of crosses, cylindrical nanorods or hole structures arranged in square or hexagonal regular geometries are reported as examples, among others. The fundamental framework connecting substrate topography and film growth at oblique angles is presented, allowing the use of substrate patterning as a feasible thin film nanostructuring technique. A systematic analysis of the growth of TiO2 thin films on 4 different lithographic patterned substrates in 4 different scale lengths is also presented. A first conclusion is the existence of a height-based selective growth in the initial stages of the deposition, by which the film preferentially develops on top of the tallest substrate features. This behavior is maintained until the film reaches a critical thickness, the so-called Oblivion Thickness, above which the film topography becomes gradually independent of the substrate features. A general formula relating the spatial features of the pattern, the coarsening exponent and the Oblivion Thickness has been deduced.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Digging deeper: deep joint species distribution modeling reveals environmental drivers of Earthworm Communities

  • Sara, Si-moussi
  • Wilfried, Thuiller
  • Esther, Galbrun
  • Thibaud, Decaëns
  • Sylvain, Gérard
  • Fernández Marchán, Daniel
  • Claire, Marsden
  • Yvan, Capowiez
  • Mickaël, Hedde
Earthworms are key drivers of soil function, influencing organic matter turnover, nutrient cycling, and soil structure. Understanding the environmental controls on their distribution is essential for predicting the impacts of land use and climate change on soil ecosystems. While local studies have identified abiotic drivers of earthworm communities, broad-scale spatial patterns remain underexplored. We developed a multi-species, multi-task deep learning model to jointly predict the distribution of 77 earthworm species across metropolitan France, using historical (1960–1970) and contemporary (1990–2020) records. The model integrates climate, soil, and land cover variables to estimate habitat suitability. We applied SHapley Additive exPlanations (SHAP) to identify key environmental drivers and used species clustering to reveal ecological response groups. The joint model achieved high predictive performance (TSS >0.7) and improved predictions for rare species compared to traditional species distribution models. Shared feature extraction across species allowed for more robust identification of common and contrasting environmental responses. Precipitation variability, temperature seasonality, and land cover emerged as dominant predictors of earthworm distribution but differed in ranking across species and functional groups. Species clustering into response groups to climatic, land use and soil revealed distinct ecological strategies including a gradient of sensitivity to precipitation seasonality, differential habitat preferences in terms of vegetation cover and wetness and trade-offs between soil acidity and organic matter quality. Our study advances both the methodological and ecological understanding of soil biodiversity. We demonstrate the utility of interpretable deep learning approaches for large-scale soil fauna modeling and provide new insights into earthworm habitat specialization. These findings highlight land cover and seasonal climate variability as efficient proxies for soil biodiversity, providing actionable indicators for global monitoring initiatives and helping to identify habitat requirements of earthworm species to guide emerging earthworm conservation strategies in the face of global environmental change.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Global phase portraits of kukles differential systems with homogenous polynomial nonlinearities of degree 5 having a center

RIUMA. Repositorio Institucional de la Universidad de Málaga
Publicación Otros (Other)

Pensamiento Computacional con la Máquina de Turing Tumble: Propuestas Desenchufadas para el Aula (Ed. Primaria), Computational Thinking with the Turing Tumble Machine: Unplugged Classroom Activities – Teacher’s Guide and Student Workbook

  • Arjona-Aranda, Gregorio
  • Ayala-Altamirano, Cristina
  • Sánchez-Cruzado, Cristina
  • Moral-Sánchez, Silvia Natividad
  • Sánchez-Compaña, María Teresa
El resultado consiste en el desarrollo de una metodología didáctica para la enseñanza del pensamiento computacional en Educación Primaria, materializada en una guía docente y un cuaderno de trabajo para el alumnado, diseñados para su implementación en el área de matemáticas mediante tareas desenchufadas y recursos manipulativos. El material propone una secuencia estructurada de tareas (predicción, creación y optimización) orientada al desarrollo de destrezas del pensamiento computacional, e incorpora como elemento diferenciador el sentido socioafectivo de las matemáticas, a través de la contextualización en las figuras de Alan Turing y Joan Clarke, promoviendo la reflexión sobre el valor del conocimiento científico, el trabajo colaborativo y la superación de limitaciones sociales. El resultado se encuadra en el ámbito de la Didáctica de la Matemática con aplicación directa en el sistema educativo, particularmente en el desarrollo curricular del pensamiento computacional en Educación Primaria mediante enfoques accesibles, sin dependencia tecnológica y basados en evidencia empírica., Este proyecto presenta una metodología didáctica (compuesta por una guía docente y un cuaderno para el alumno) para fomentar pensamiento computacional en matemáticas de Educación Primaria. Utiliza un enfoque "desenchufado" (sin ordenadores) y manipulativo, estructurando las tareas en predicción, creación y optimización. Su principal innovación es la inclusión del ámbito socioafectivo a través de las figuras de Alan Turing y Joan Clarke, promoviendo el trabajo en equipo, la valoración de la ciencia y la superación de barreras sociales. Es una propuesta accesible, práctica y basada en evidencia para el aula. This project presents a didactic methodology (comprising a teacher's guide and a student workbook) designed to foster computational thinking in Primary Education mathematics. It utilizes an "unplugged" (tech-free) and hands-on approach, structuring tasks around predicting, creating, and optimizing. Its main innovation is the inclusion of a socio-affective perspective through the historical figures of Alan Turing and Joan Clarke, which promotes teamwork, scientific appreciation, and the overcoming of social barriers. It is an accessible, practical, and evidence-based resource for the classroom.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The use of glyphosate for Carpobrotus eradication in sand dune ecosystems: evaluation of the potential effects on the reintroduction of native plants

  • Fos Causera, Mariano|||0000-0002-1355-0349
  • Sanz Vidal, Francisco de Borja
  • Sanchís Duato, Enrique José
[EN] Glyphosate application avoids some problems associated with manually controlling Carpobrotus. However, before it can be extended, we must understand whether residual glyphosate affects the restoration of natural vegetation by sowing or planting. Thus, we sprayed glyphosate on plots with 100% Carpobrotus coverage at 10 times the maximum recommended dose (4 g/m(2)) and directly on sand at 0.3 and 4 g/m(2). Sand, sifted sand without Carpobrotus litter and sand with Carpobrotus litter were subsequently collected 15, 30, and 60 days after applications, and were used as substrates to evaluate seedling emergence of four native dune species sown in trays. We also assessed the development of two species when grown in pots. Seedling emergence of M. marina, L. creticus and O. ramosissima was not affected in sand without Carpobrotus litter; A. arenaria emergence was reduced by 35%. Seedling emergence of four dune species was inhibited when glyphosate had been directly sprayed on sand. Effect of dose and time after spraying was observed. The presence of Carpobrotus litter reduced the emergence of L. creticus, O. ramosissima and A. arenaria, and inhibition seemed be caused by the allelopathic properties of the Carpobrotus litter. No significant effects of glyphosate spraying were observed in growth tests., This study was made possible through significant support from the Conselleria de Territori i Habitatge, Generalitat Valenciana (grant Number T621700) and from the Conselleria d'Educacio, Generalitat Valenciana (project GVPRE/2008/134).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

HBIM: Background, Current Trends, and Future Prospects

  • Ávila, Fernando|||0000-0003-1576-5826
  • Blanca-Hoyos, Álvaro
  • Puertas, Esther
  • Gallego, Rafael
[EN] Historic building information modeling (HBIM) represents an emerging field that extends traditional building information modeling (BIM) to the preservation, management, and analysis of heritage structures. This paper provides a comprehensive overview of HBIM, tracing its evolution from its origins and early applications to its current state and future prospects. The processes of data collection and modeling are thoroughly examined, addressing levels of detail, digitization methods, and commonly used software and data formats. Attention is also given to existing BIM standards and protocols and their potential application to HBIM. The paper emphasizes the importance of appropriate data selection and management, both for geometrical and non-geometrical (historical and architectural) information. Furthermore, it explores the integration of HBIM with structural analysis tools, a subject of growing interest, particularly in light of its potential for integration with structural health monitoring systems and advanced computational models. The results of this review highlight the increasing role of HBIM in heritage preventive preservation and management, a topic that accounted for 40% of the articles on this subject in 2023. These findings demonstrate that HBIM offers significant potential for managing and preserving heritage buildings, but to fully realize its capabilities, advancements in data interoperability, standardized protocols, and real-time structural analysis are essential to make it a widely effective tool in conservation efforts., This research is part of the project "Evaluacion de la vulnerabilidad estructural de patrimonio construido en tapia-VulTapia" (Evaluation of the structural vulnerability of heritage built in rammed earth), C-ING-134-UGR23, funded by Consejeria de Universidad, Investigacion e Innovacion and by ERDF Andalusia Program 2021-2027. This study was partially supported by a doctoral grant to & Aacute;lvaro Blanca-Hoyos within the program "Formacion de Investigadores-Contratos Predoctorales (FPU) Universidad de Granada-Banco Santander".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Gypsum stabilization for enhancing the compressive behavior of rammed earth: experimental and statistical assessment

  • Ávila, Fernando|||0000-0003-1576-5826
  • Fagone, Mario
  • Gallego, Rafael
  • Puertas, Esther
  • Ranocchiai, Giovanna
[EN] Gypsum has historically been used as an additive in rammed earth construction to enhance its mechanical properties. However, its application has declined in modern practice, and scientific literature on gypsum-stabilized rammed earth remains limited. This study investigates the effectiveness of gypsum as a stabilizer to improve the compressive behavior of rammed earth, presenting it as a sustainable alternative to Portland cement, which, despite its widespread use, entails higher environmental and economic costs. To assess the influence of gypsum, uniaxial compression tests were performed on rammed earth specimens with varying gypsum contents (0%-15%). The results demonstrate significant increases in compressive strength (up to 130%) and elastic modulus (up to 262%) with gypsum inclusion, with the highest values recorded for the 15% gypsum-stabilized mixture (3.2 MPa and 267 MPa, respectively). Statistical analysis, including analysis of variance (ANOVA), confirmed the significance of these enhancements, with only the difference in elastic modulus between the 10% and 15% mixtures showing no statistical significance. These findings highlight gypsum as a viable eco-friendly solution for improving the mechanical performance of rammed earth construction., The author(s) declare that financial support was received for the research and/or publication of this article. This research is part of the project "Evaluacion de la vulnerabilidad estructural de patrimonio construido en tapia-VulTapia" (Evaluation of the structural vulnerability of heritage built in rammed earth), funded by Consejeria de Universidad, Investigacion e Innovacion and by ERDF Andalusia Program 2021-2027 (grant number C-ING-134-UGR23). The laboratory tests were carried out thanks to the founds assigned by the Italian Ministry of Universities and Research (MUR) to the University of Florence.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fully Vacuum Deposited Perovskite Solar Cells in Substrate Configuration

  • Abhyuday, Paliwal
  • Zanoni, Kassio P. S.
  • Roldán-Carmona, Cristina
  • Bolink, H.J.
  • Hernández Fenollosa, María De Los Ángeles|||0000-0001-8003-3651
[EN] This work demonstrates the fabrication of perovskite solar cells in substrate configuration by vacuum-deposition methods. The resultant solar cells demonstrate high efficiency of 19% and thermal stability of more than 550 h. The use of mature and industry-friendly vacuum-deposition methods as well as the demonstrated approach of fabricating the perovskite solar cell may help in the upscaling and future commercialization of perovskite solar cells, The research leading to these results has received funding from the European Research Council (ERC) under the European Union s Horizon 2020 research and innovation programme (grant agreement no. 834431). The authors acknowledge support from the Comunitat Valenciana: H.J.B. and M.A.H.-F. for project PROMETEU/2020/077 and A.P. for grant GRISOLIAP/2020/134. The authors also acknowledge support by the Ministry of Science and Innovation (MCIN) and the Spanish State Research Agency (AEI) project PID2021-126444OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union; project CEX2019-000919-M funded by MCIN/AEI/10.13039/501100011033; K.P.S.Z. for grant IJC2019-039851-I funded by MCIN/AEI/10.13039/501100011033; and C.R.-C. for grant RYC2019-027187-I funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Carpobrotus Management in a Mediterranean Sand Dune Ecosystem: Minimum Effective Glyphosate Dose and an Evaluation of Tarping

  • Fos Causera, Mariano|||0000-0002-1355-0349
  • Sanz Vidal, Francisco de Borja
  • Sanchís Duato, Enrique
[EN] At a global scale, biological invasions represent one of the most important threats to biodiversity conservation. The Carpobrotus (Aizoaceae) genus, which is native to South Africa, has been introduced into five different continents and is particularly invasive in many coastal habitats. The application of glyphosate avoids some problems associated with manually controlling Carpobrotus over large spatial scales. However, before this practice can be extended and its impact minimized, its effectiveness under different application conditions must be assessed first. Thus, glyphosate was sprayed at different concentrations (0.5, 0.4, 0.3, 0.2, 0.1, and 0.05 g/m(2)) on experimental plots with 100% Carpobrotus coverage to determine the minimum effective dose. Tarping was also evaluated as an alternative method for Carpobrotus management over reduced areas. Thus, four different weed-control fabric types were tested: black anti-weed fabric, sewn felt, black G-300 polyethylene, and Fijavert coconut-anti-weed matting on experimental plots with 100% Carpobrotus coverage. The obtained results showed that the minimum effective dose of glyphosate which prevents Carpobrotus regrowth in dune ecosystems was 0.4 g/m(2). It was also shown that at least three months of tarping were required under winter conditions to produce complete-Carpobrotus plant wilting and thus, prevent their regrowth. No significant effect on Carpobrotus growth was observed in terms of the fabric type used for the tarping tests. The presence of native species seedlings in the experimental plots after the death of the Carpobrotus plants following the application of herbicides or tarping was also monitored., This study was made possible by significant support from the Conselleria de Territori i Habitatge, Generalitat Valenciana (grant Number T621700) and from the Conselleria d'Educacio, Generalitat Valenciana (project GVPRE/2008/134). The authors would also like to thank the Valencian Regional Government environmental officers, Gabriel Ballester and Vicente Deltoro for their logistical support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Geometry and Gâteaux smoothness in separable Banach spaces

  • Hajek, P.
  • Zizler, Vaclav
  • Montesinos Santalucia, Vicente
[EN] It is a classical fact, due to Day, that every separable Banach space admits an equivalent Gateaux smooth renorming. In fact, it admits an equivalent uniformly Gateaux smooth norm, as was shown later by Day, James, Swaminathan, and independently by the third named author. It is therefore rather unexpected that the existence of Gateaux smooth renormings satisfying various quantitative estimates on the directional derivative has rather strong structural and geometrical implications for the space. For example, by a result of Vanderwerff, if the directional derivatives satisfy a p-estimate, where p varies arbitrarily with respect to the point and the direction in question, then the Banach space must be an Asplund space. In the present survey paper, we discuss the interplay between various types of Gateaux differentiability of norms and extreme points with the geometry of separable Banach spaces. In particular, we present various characterizations of Asplund, reflexive, superreflexive, and other classes of separable Banach spaces, via smooth as well as rotund renormings. We also include open problems of various levels of difficulty, which may foster research in the area of smoothness and renormings of Banach spaces., Supported in part by GACR P201/11/0345. Supported in part by Proyecto MTM2008-03211. Ministerio de Ciencia e Innovaci ´on, by a grant BEST 2010-134 of the Generalitat Valenciana, and by a grant from the Universidad Polit´ecnica de Valencia, PAID 2009, Spain. Supported in part by a grant AVOZ 101 905 03 and IAA 100190901 (Czech Republic).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Gamificación en la evaluación dinámica de contenidos de la materia básica del Grado en Criminología

  • Sainz de Abajo, Beatriz
  • De la Torre Díez, Isabel
  • López Coronado, Miguel
  • Couto, Celso
  • De Castro Lozano, Carlos
[EN] This study aims to motivate the students, transforming the learning process through gamification as a pedagogical tool, seeking to arouse students' interest in the subject, and encouraging them through a system of rewards that add up to the grade end of the course. In order to evaluate the level of previous knowledge that the student has, on the subject, we can apply this technique at the beginning of the lesson, adjusting the contents anticipated in the development of the session at this level, focusing on aspects where there are more problems of understanding. Applying the gamification in the final minutes of the lesson will allow us to evaluate the comprehension of the contents of the subject and to improve the level of attention of the student, who knows that what was presented in the session will be immediately tested at the end of the presentation., [ES] El objetivo de este trabajo es motivar a los alumnos, convirtiendo en lúdico el proceso de aprendizaje a través de la gamificación como herramienta pedagógica, buscando interesar a los alumnos por la materia, e incentivándoles a través de un sistema de recompensas que se sumen en la nota final del curso. Para evaluar el nivel de conocimientos previo que el alumno tiene sobre la materia, podemos aplicar esta técnica al inicio de la clase, ajustando los contenidos previstos en el desarrollo de la sesión a ese nivel, enfocándonos en los aspectos donde muestran más problemas de comprensión. Aplicar la gamificación en los minutos finales de la clase, nos permite evaluar el alcance de comprensión de los contenidos del tema y mejorar el nivel de atención del alumno, que sabe que lo expuesto en la sesión será inmediatamente testeado al finalizar la exposición., Este trabajo no hubiera sido posible sin el apoyo proporcionado por el Vicerrectorado de Docencia de la Universidad de Valladolid (Proyecto de Innovación Docente Nº 134).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Squaramide-Tethered Sulfonamides and Coumarins: Synthesis, Inhibition of Tumor-Associated CAs IX and XII and Docking Simulations

  • Arrighi, Giulia
  • Puerta, Adrián
  • Petrini, Andrea
  • Nocentini, Alessio
  • Fernandes, Miguel X.
  • Padrón, José M.
  • Supuran, Claudiu T.
  • Fernández-Bolaños, José G.
  • López, Óscar
  • Hicke-García, Francisco Javier|||0000-0002-8419-0467
[EN] (1) Background: carbonic anhydrases (CAs) are attractive targets for the development of new anticancer therapies; in particular, CAs IX and XII isoforms are overexpressed in numerous tumors. (2) Methods: following the tail approach, we have appended a hydrophobic aromatic tail to a pharmacophore responsible for the CA inhibition (aryl sulfonamide, coumarin). As a linker, we have used squaramides, featured with strong hydrogen bond acceptor and donor capacities. (3) Results: Starting from easily accessible dimethyl squarate, the title compounds were successfully obtained as crystalline solids, avoiding the use of chromatographic purifications. Interesting and valuable SARs could be obtained upon modification of the length of the hydrocarbon chain, position of the sulfonamido moiety, distance of the aryl sulfonamide scaffold to the squaramide, stereoelectronic effects on the aromatic ring, as well as the number and type of substituents on C-3 and C-4 positions of the coumarin. (4) Conclusions: For sulfonamides, the best profile was achieved for the m-substituted derivative 11 (K-i = 29.4, 9.15 nM, CA IX and XII, respectively), with improved selectivity compared to acetazolamide, a standard drug. Coumarin derivatives afforded an outstanding selectivity (K-i > 10,000 nM for CA I, II); the lead compound (16c) was a strong CA IX and XII inhibitor (K-i = 19.2, 7.23 nM, respectively). Docking simulations revealed the key ligand-enzyme interactions., This research was funded by the Spanish Ministry for Science and Innovation, MCIN/AEI/10.13039/501100011033 (grant number PID2020-116460RB-I00), the Junta de Andalucia (FQM-134), the Canary Islands Government (ACIISI/FEDER, UE, grant number ProID2020010101) and by the Italian Ministry for University and Research (MIUR), grant PRIN: prot. 2017XYBP2R (CTS).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Perovskite/Perovskite Tandem Solar Cells in the Substrate Configuration with Potential for Bifacial Operation

  • Gil-Escrig, Lidón
  • Hu, Shuaifeng
  • Zanoni, Kassio P. S.
  • Paliwal, Abhyuday
  • Roldán-Carmona, Cristina
  • Sessolo, Michele
  • Wakamiya, Atsushi
  • Bolink, H.J.
  • Hernández Fenollosa, María De Los Ángeles|||0000-0001-8003-3651
[EN] Perovskite/perovskite tandem solar cells have recently exceeded the record power conversion efficiency (PCE) of single-junction perovskite solar cells. They are typically built in the superstrate configuration, in which the device is illuminated from the substrate side. This limits the fabrication of the solar cell to transparent substrates, typically glass coated with a transparent conductive oxide (TCO), and adds constraints because the first subcell that is deposited on the substrate must contain the wide-bandgap perovskite. However, devices in the substrate configuration could potentially be fabricated on a large variety of opaque and inexpensive substrates, such as plastic and metal foils. Importantly, in the substrate configuration the narrow-bandgap subcell is deposited first, which allows for more freedom in the device design. In this work, we report perovskite/perovskite tandem solar cells fabricated in the substrate configuration. As the substrate we use TCO-coated glass on which a solution-processed narrow-bandgap perovskite solar cell is deposited. All of the other layers are then processed using vacuum sublimation, starting with the charge recombination layers, then the wide-bandgap perovskite subcell, and finishing with the transparent top TCO electrode. Proof-of-concept tandem solar cells show a maximum PCE of 20%, which is still moderate compared to those of best-in-class devices realized in the superstrate configuration yet higher than those of the corresponding single-junction devices in the substrate configuration. As both the top and bottom electrodes are semitransparent, these devices also have the potential to be used as bifacial tandem solar cells., The research leading to these results received funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Programme (Grant Agreement 834431). The authors acknowledge support from the Comunitat Valenciana: H.J.B. and M.A.H.-F. for Projects IDIFEDER/2018/061 and PROME-TEU/2020/077; A.P. for Grant GRISOLIAP/2020/134; K.P.S.Z. for Grant APOSTD/2021/368; C.R.-C. for Project CIDEGENT/2020/046; M.S. for Project CISEJI/2022/43. The authors also acknowledge support by the Ministry of Science and Innovation (MCIN) and the Spanish State Research Agency (AEI): Project PCI2019-111829-2 funded by MCIN/AEI/10.13039/501100011033 and by the European Union; Project CEX2019-000919-M funded by MCIN/AEI/10.13039/501100011033; L.G.-E. for Grant IJC2019-039851-I funded by MCIN/AEI/10.13039/501100011033; M.S. for Grant RYC-2016-21316 funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in Your Future". This work was also supported by the JST-Mirai Program (JPMJMI22E2), NEDO, the International Collaborative Research Program of ICR, Kyoto University, a Grant-in-Aid for Scientific Research (A) (21H04699), JSPS (Research Fellowship for Young Scientists 21J14762), and the Chinese Scholarship Council (CSC).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Preventive Preservation of Rammed Earth Historical Heritage Through Continuous Monitoring, Architectural Inspections, and Data Fusion

  • Puertas, Esther
  • García-Macías, Enrique
  • Gallego, Rafael
  • Ávila, Fernando|||0000-0003-1576-5826
[EN] Rammed earth construction, an ancient and sustainable building technique, faces significant preservation challenges, particularly in historical contexts. This study aims to enhance the preventive preservation of rammed earth historical heritage through a comprehensive methodology combining continuous monitoring, architectural inspections, and data fusion. By integrating nondestructive testing techniques such as ultrasound, thermography, and ground-penetrating radar with operational modal analysis and modeling, the proposed approach allows for early detection and assessment of structural vulnerabilities. This methodology was applied to the Tower of Muhammad in the Alhambra of Granada, Spain, demonstrating its effectiveness in identifying and quantifying damage and predicting structural health. Using multi-source data (documentation, inspections, nondestructive tests, and continuous monitoring), a finite element model was built, calibrated (achieving an avg. error in modal frequencies of 1.28% and a minimum modal assurance criterion value of 0.94), and used to develop a surrogate model able to predict the modal properties of the tower in 0.02 s, becoming compatible with continuous system identification. The presented results highlight the importance of continuous data acquisition and advanced diagnostic tools for safeguarding rammed earth structures against environmental and anthropogenic threats. This study advocates for the adoption of digital twins in historical preservation, facilitating informed decision-making and sustainable management of cultural heritage., This research is part of the project "Evaluacion de la Vulnerabilidad Estructural de Patrimonio Construido en Tapia - VulTapia" (Evaluation of the Structural Vulnerability of Heritage Built in Rammed Earth), grant number C-ING-134-UGR23, funded by Consejeria de Universidad, Investigacion e Innovacion and by ERDF Andalusia Program 2021-2027.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Identification and profiling of microRNA between back and belly Skin in Rex rabbits (Oryctolagus cuniculus)

  • Zhao, Bohao
  • Chen, Yang
  • Mu, Lin
  • Hu, Shuaishuai
  • Wu, Xinsheng
[EN] Skin is an important trait for Rex rabbits and skin development is influenced by many processes, including hair follicle cycling, keratinocyte differentiation and formation of coat colour and skin morphogenesis. We identified differentially expressed microRNAs (miRNAs) between the back and belly skin in Rex rabbits. In total, 211 miRNAs (90 upregulated miRNAs and 121 downregulated miRNAs) were identified with a |log2 (fold change)|>1 and P-value<0.05. Using target gene prediction for the miRNAs, differentially expressed predicted target genes were identified and the functional enrichment and signalling pathways of these target genes were processed to reveal their biological functions. A number of differentially expressed miRNAs were found to be involved in regulation of the cell cycle, skin epithelium differentiation, keratinocyte proliferation, hair follicle development and melanogenesis. In addition, target genes regulated by miRNAs play key roles in the activities of the Hedgehog signalling pathway, Wnt signalling pathway, Osteoclast differentiation and MAPK pathway, revealing mechanisms of skin development. Nine candidate miRNAs and 5 predicted target genes were selected for verification of their expression by quantitative reverse transcription polymerase chain reaction. A regulation network of miRNA and their target genes was constructed by analysing the GO enrichment and signalling pathways. Further studies should be carried out to validate the regulatory relationships between candidate miRNAs and their target genes., This study was supported by the Modern Agricultural Industrial System Special Funding (CARS-44-A-1), the Priority Academic Programme Development of Jiangsu Higher Education Institutions (2014-134) and the General Programme of Natural Science Foundation of the Higher Education Institutions of Jiangsu Province (16KJB230001).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of clay content on the fracture behavior of rammed earth: Experimental and nondestructive assessment

  • Ávila, Fernando|||0000-0003-1576-5826
  • Castro, Ricardo
  • Blanca-Hoyos, Álvaro
  • Gallego, Rafael
  • Puertas, Esther
[EN] Understanding the fracture behavior of rammed earth (RE) is critical, as cracking and brittle failure often govern the structural performance and durability of rammed earth elements, particularly under extreme loading conditions. The present study investigates the fracture behavior of unstabilized rammed earth as a function of clay content, using both destructive and nondestructive testing approaches. Three-point bending tests were conducted on four unstabilized RE mixtures, with increasing clay contents of 25%, 40%, 65% and 100%, to characterize fracture behavior. Results demonstrate that increasing clay content improves stiffness, peak load and fracture energy. Despite the inherent heterogeneity of RE, results showed consistent trends and variability levels comparable to those reported in the literature. Maximum average fracture energy of 26 N/m was obtained for 65 %-clay specimens. A piecewise linear-exponential model was fitted to the load-displacement curves, with its parameters expressed as functions of clay content, enabling extrapolation to other mix designs. Nondestructive techniques (free-free resonant column and ultrasonic pulse velocity) showed good correlation with fracture energy, particularly through longitudinal natural frequency. A multivariable regression combining parameters from both nondestructive tests improved prediction accuracy (R-2 = 0.80), supporting the combined use of nondestructive methods for reliable assessment of rammed earth behavior. These findings contribute to improved diagnostics of existing RE structures and more effective mix design and quality control in new RE construction., This research is part of the project "Evaluacion de la vulnerabilidad estructural de patrimonio construido en tapia-VulTapia" (Evaluation of the structural vulnerability of heritage built in rammed earth), funded by Consejeria de Universidad, Investigacion e Innovacion, Spain and by ERDF Andalusia Program 2021-2027 [grant number C-ING-134-UGR23], developed in the Sustainable Engineering Structures Laboratory (SES-Lab) of the University of Granada. This study was partially supported by a doctoral grant to Alvaro Blanca-Hoyos within the program "Formacion de Investigadores - Contratos Predoctorales (FPU) Universidad de Granada-Banco Santander". Special thanks are extended to Juan Blanco, MSc, for his valuable contributions to the conduction of the tests and the initial processing of the experimental data.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

ITO Top-Electrodes via Industrial-Scale PLD for Efficient Buffer-Layer-Free Semitransparent Perovskite Solar Cells

  • Zanoni, Kassio P. S.
  • Paliwal, Abhyuday
  • Repecau, Pierre-Alexis
  • Morales-Masis, Monica
  • Bolink, H.J.
  • Hernández Fenollosa, María De Los Ángeles|||0000-0001-8003-3651
[EN] The deposition of transparent conductive oxides (TCO) usually employs harsh conditions that are frequently harmful to soft/organic underlayers. Herein, successful use of an industrial pulsed laser deposition (PLD) tool to directly deposit indium tin oxide (ITO) films on semitransparent vacuum-deposited perovskite solar cells without damage to the device stack is demonstrated. The morphological, electronic, and optical properties of the PLD deposited ITO films are optimized. A direct relation between the PLD chamber pressure and the solar cell performance is obtained. The semitransparent perovskite solar cells prepared exclusively by vacuum-assisted techniques had fill factors of 78% and exceeded 18% in power conversion efficiencies. This demonstrates that the direct deposition of TCO-based top electrodes without protective buffer layers is possible and leads to efficient devices., The research leading to these results has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Programme (Grant agreement No. 834431). The authors acknowledged support from the Comunitat Valenciana (IDIFEDER/2018/061 and PROMETEU/2020/077), as well as by the Ministry of Science and Innovation (MCIN), and the Spanish State Research Agency (AEI): Project PCI2019-111829-2 funded by MCIN/AEI/10.13039/501100011033 and by the European Union; Project CEX2019-000919-M funded by MCIN/AEI/10.13039/501100011033, and the King Abdullah University of Science and Technology (KAUST) Office of Sponsored Research (OSR-2019-CRG8-4093.2). K.P.S.Z. acknowledged funding from Comunitat Valenciana (APOSTD/2021/368). AP acknowledged his Grisolia grant from the Comunitat Valenciana (GRISOLIAP/2020/134). P-A.R. and M.M.M. acknowledged the financial support from the Netherlands Enterprise Agency under contract SOL18001 of the SOLAR ERA NET CUSTCO project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

One-step decomposition pathway for solution-derived metal oxide layers driven by hydroxyl radical atmospheres

  • Rivas, Y. A.
  • Echaniz-Cintora, M.
  • Barreto, A.
  • Molina-Calzada, J. A.
  • Serrano, M. C.
  • Jimenez, R.
  • Bretos, I.
  • Calzada, M. L.
  • Vidal Moya, José Alejandro
[EN] Solution deposition of high-performance oxide films has attracted intense research interest driven by the need for sustainable synthesis strategies that simplify key processes such as ligand removal, oxidation of organic residues, and the formation of amorphous and crystalline oxide phases. These approaches aim not only to reduce the carbon footprint but also to lower the thermal budget required for oxide film formation, thereby enabling direct, large-area deposition on low-cost, temperature-sensitive substrates required for emerging applications in thin-film electronics. In this work, we elucidate the chemical mechanism underlying the crystallization of solution-processed metal oxide films under highly reactive hydroxyl ((OH)-O-center dot) radical atmospheres. These radicals promote a simple, rapid, one-step decomposition of solution-derived films, directly yielding crystalline oxide films with substantially reduced energy input compared with conventional solution-deposition processes. Because this mechanism is independent of solution chemistry and oxide formulation, the platform is broadly applicable to diverse solution chemistries, crystalline oxides, and substrates. As a representative demonstration, BiFeO3 perovskite films are fabricated on flexible polyimide substrates, producing biocompatible, multifunctional flexible films., This work was supported by the Spanish projects PID2022-136790OB-I00, PID2021, CNS2022-135743 and TED2021-130871BC21 funded by MCIN/AEI/10.13039/501100011033 and the European Union through the "NextGeneration EU"/PRTR initiative. The Severo Ochoa Centres of Excellence program is acknowledged through Grant CEX2024-001445-S. A. B acknowledges financial support of the CAM PhD grant from the Comunidad de Madrid (PIPF-2024ECO-33982). The authors acknowledge Teresa Blasco Ibanez for contributing to the interpretation and discussion of the Electron Paramagnetic Resonance (EPR) results of the samples obtained at the Instituto de Tecnologia Quimica (UPV-CSIC), Universitat Politecnica de Valencia - Consejo Superior de Investigaciones Cientificas. The Advanced Light Microscopy Service at the Centro Nacional de Biotecnologia (CNB-CSIC) is acknowledged for assistance with confocal microscopy studies. The Scanning Electron Microscopy Service at the Instituto de Micro y Nanotecnologia (IMN-CSIC) is acknowledged for support with SEM studies. The MiNa Laboratory at IMN acknowledges its funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794), and EU (FEDER, FSE)".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Straightforward access to novel mitochondriotropics derived from 2-arylethanol as potent and selective antiproliferative agents

  • Hicke-García, Francisco Javier|||0000-0002-8419-0467
  • Puerta, Adrián
  • Dinic, Jelena
  • Pesic, Milica
  • Padrón, José M.
  • López, Óscar
  • Fernández-Bolaños, José G.
[EN] The necessity for developing novel cytostatic agents with improved activities and reduced side-effects to tackle cancer prompted us to investigate mitochondria-targeted compounds, an approach that is gaining attention for the selective transportation of cytotoxic agents. We envisioned the possibility of conjugating a phenethyl alcohol motif, decorated with a series of phenol-based substituents on the aryl moiety, with a triphenyl phosphonium scaffold (a mitochondria directed vector), through a hydrocarbon chain of different lengths. Thus, such compounds that incorporate the phenethyl skeleton can be considered as masked phenolic compounds derived from relevant natural counterparts found in olive tree (e.g. tyrosol, hydroxytyrosol). Title compounds exhibited very strong in vitro antiproliferative activities against the panel of six human tumor cell lines tested, with GI50 values ranging from the nanomolar (0.026 ± 0.010 mM for 36) to the submicromolar range in most of the cases; this represents an improvement of up to 350-fold compared to classical chemotherapeutic agents, like 5-fluorouracil or cisplatin. Interestingly, decrease in the linker length led to an increase of GI50 values against non-tumor cells, thus allowing a remarkable improvement of selectivity (SI up to 269). The very promising antiproliferative activities prompted us to further investigate their behaviour against multidrug resistant cell lines (MDR). The results indicated a reduced sensitivity of the multidrug resistant cells to compounds, probably due to P-gp-mediated efflux of these antiproliferative agents. Interestingly, activities were completely restored to the same levels by co-administration of tariquidar, a well-known inhibitor of P-gp. Flow cytometry analysis on sensitive cell lines revealed a decrease in the percentage of cells in G1 phase accompanied by increase in S and G2/M phases. In addition, a significant increase in subG1 area, was observed. These results are compatible with the necrotic and apoptotic cell death detected in the Annexin V assay, and with the depolarization of the mitochondria membrane. Thus, the new mitochondriotropic agents reported herein can be considered as promising antiproliferative agents, endowed with remarkable potency and selectivity, including MDR cells, upon coadministration with a pump-efflux inhibitor., We thank Grant PID2020-116460RB-I00 funded by MCIN/AEI/10.13039/501100011033, and Junta de Andalucia (FQM134) for financial support. A.P. and J.M.P. thank the Spanish Government (PGC2018-094503-B-C22, MCIU/AEI/FEDER, UE) and the Canary Islands Government (ProID2020010101, ACIISI/FEDER, UE) for financial support. A.P. thanks the EU Social Fund (FSE) and the Canary Islands ACIISI for a predoctoral grant TESIS2020010055. J.D. and M.P thank the Ministry of Education, Science and Technological Development of the Republic of Serbia for financial support (451-03-9/2021e14/200007). This work was performed within the framework of COST Action CA17104 STRATAGEM -"New diagnostic and therapeutic tools against multidrug resistant tumors". We would also like to thank the Servicio de Resonancia Magnética Nuclear, CITIUS (University of Seville) for the performance of NMR experiments.
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Dynamic Combinatorial Optimization of In Vitro and In Vivo Heparin Antidotes

  • Carbajo López, Daniel
  • Guerra-Rebollo, Marta
  • Bujons, Jordi
  • Alfonso, Ignacio
  • Prats, Eva
Heparin-like macromolecules are widely used in clinics as anticoagulant, antiviral, and anticancer drugs. However, the search of heparin antidotes based on small synthetic molecules to control blood coagulation still remains a challenging task due to the physicochemical properties of this anionic polysaccharide. Here, we use a dynamic combinatorial chemistry approach to optimize heparin binders with submicromolar affinity. The recognition of heparin by the most amplified members of the dynamic library has been studied with different experimental (SPR, fluorescence, NMR) and theoretical approaches, rendering a detailed interaction model. The enzymatic assays with selected library members confirm the correlation between the dynamic covalent screening and the in vitro heparin inhibition. Moreover, both ex vivo and in vivo blood coagulation assays with mice show that the optimized molecules are potent antidotes with potential use as heparin reversal drugs. Overall, these results underscore the power of dynamic combinatorial chemistry targeting complex and elusive biopolymers., info:eu-repo/semantics/publishedVersion
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comparative analysis of 1 H NMR and 1 H- 13 C HSQC NMR metabolomics to understand the effects of medium composition in yeast growth

  • Puig-Castellví, Francesc
  • Pérez, Yolanda
  • Piña, Benjamín
  • Tauler, Romà
  • Alfonso, Ignacio
In nuclear magnetic resonance (NMR) metabolomics, most of the studies have been focused on the analysis of one-dimensional proton (1D 1 H) NMR, whereas the analysis of other nuclei, such as 13 C, or other NMR experiments are still underrepresented. The preference of 1D 1 H NMR metabolomics lies on the fact that it has good sensitivity and a short acquisition time, but it lacks spectral resolution because it presents a high degree of overlap. In this study, the growth metabolism of yeast (Saccharomyces cerevisiae) was analyzed by 1D 1 H NMR and by two-dimensional (2D) 1 H- 13 C heteronuclear single quantum coherence (HSQC) NMR spectroscopy, leading to the detection of more than 50 metabolites with both analytical approaches. These two analyses allow for a better understanding of the strengths and intrinsic limitations of the two types of NMR approaches. The two data sets (1D and 2D NMR) were investigated with PCA, ASCA, and PLS DA chemometric methods, and similar results were obtained regardless of the data type used. However, data-analysis time for the 2D NMR data set was substantially reduced when compared with the data analysis of the corresponding 1 H NMR data set because, for the 2D NMR data, signal overlap was not a major problem and deconvolution was not required. The comparative study described in this work can be useful for the future design of metabolomics workflows, to assist in the selection of the most convenient NMR platform and to guide the posterior data analysis of biomarker selection. © 2018 American Chemical Society., The research leading to these results has received funding from the European Research Council under the European Union’s Seventh Framework Programme (FP/2007-2013)/ERC Grant Agreement no. 320737. The 500 MHz spectrometer was purchased in part through a Research Infrastructure MINECO-FEDER fund (Grant CSIC13-4E-2076)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pseudopeptidic compounds for the generation of dynamic combinatorial libraries of chemically diverse macrocycles in aqueous media

  • Atcher, Joan
  • Solà Oller, Jordi
  • Alfonso, Ignacio
A straightforward four-step synthesis leads to the preparation of C2-symmetric dithiols containing a central aromatic core and amino acid side chains. These building blocks allow the preparation of dynamic covalent libraries of pseudopeptidic macrocycles in aqueous media that cover a broad range of polarities, functional groups and bulkiness mirroring the diversity found in natural peptides. The versatility of the generated dynamic libraries has been illustrated by the amplification of two different members from the same library upon the action of two biologically relevant templates. © The Royal Society of Chemistry, This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO/FEDER, CTQ2012-38543-C03-03, CTQ2015-70117-R and CSIC13-4E-2076), EU (FP7-PEOPLE-2012-CIG-321659) and Generalitat de Catalunya (2014 SGR 231). Personal financial support for J. S. (MINECO, Ramon y Cajal contract) and J. A. (CSIC and European Social Fund, JAE-predoc fellowship) are gratefully acknowledged. We also thank Dr Yolanda Perez for the helpful assistance in the acquisition of the water-suppression NMR experiments., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dynamic Covalent Identification of an Efficient Heparin Ligand

  • Corredor, Miriam
  • Carbajo, Daniel
  • Domingo, Cecilia
  • Pérez, Yolanda
  • Bujons, Jordi
  • Messeguer, Àngel
  • Alfonso, Ignacio
Despite heparin being the most widely used macromolecular drug, the design of small-molecule ligands to modulate its effects has been hampered by the structural properties of this polyanionic polysaccharide. Now a dynamic covalent selection approach is used to identify a new ligand for heparin, assembled from extremely simple building blocks. The amplified molecule strongly binds to heparin (K D in the low μm range, ITC) by a combination of electrostatic, hydrogen bonding, and CH–π interactions as shown by NMR and molecular modeling. Moreover, this ligand reverts the inhibitory effect of heparin within an enzymatic cascade reaction related to blood coagulation. This study demonstrates the power of dynamic covalent chemistry for the discovery of new modulators of biologically relevant glycosaminoglycans. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, Financial Support from the Spanish Ministry of Economy, Industry and Competitiveness (MINECO/FEDER, CTQ2015-70117-R) and AGAUR (2017 SGR 208) is gratefully acknowledged. The 500 MHz spectrometer and cryoprobe in the IQAC NMR facility were funded by the CSIC13-4E2076 MINECO-FEDER grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dynamic Stereoselection of Peptide Helicates and Their Selective Labeling of DNA Replication Foci in Cells

  • Gómez-González, Jacobo
  • Pérez, Yolanda
  • Sciortino, Giuseppe
  • Roldan-Martín, Lorena
  • Martínez-Costas, José
  • Didier Maréchal, Jean
  • Alfonso, Ignacio
  • Vázquez, Miguel
  • Vázquez, M. Eugenio
Although largely overlooked in peptide engineering, coordination chemistry offers a new set of interactions that opens unexplored design opportunities for developing complex molecular structures. In this context, we report new artificial peptide ligands that fold into chiral helicates in the presence of labile metal ions such as Fe(II) and Co(II). Heterochiral β turn promoting sequences encode the stereoselective folding of the peptide ligands and define the physicochemical properties of their corresponding metal complexes. CD and NMR spectroscopy in combination with computational methods allowed us to identify and determine the structure of two isochiral ΛΛ‐helicates, folded as topological isomers. Finally, in addition to the in vitro characterization of their selective binding to DNA three‐way junctions, cell microscopy experiments demonstrated that a rhodamine‐labeled Fe(II) helicate was internalized and selectively stains DNA replication factories in functional cells., Financial support from the Spanish grant RTI2018-099877-B-I00, the Xunta de Galicia (grupos con potencial de crecemento ED431B 2018/04, Centro singular de investigación de Galicia accreditation 2016–2019, ED431G/09, and ED431B 2018/04) and the European Union (European Regional Development Fund - ERDF) are gratefully acknowledged. J. G.-G. thanks the Spanish Ministry of Science and Innovation/Spanish Research Agency for his FPI fellowship. We also wish to express our gratitude to Soraya Learte-Aymamí for her assistance in the optimization of the EMSA assays. I. A. thanks Spanish Ministry of Science and Innovation/Spanish Research Agency (MCI/AEI/FEDER, RTI218- 096182-B-I00, CSIC13-4E-2076) and AGAUR (2017 SGR 208). G.S. L.R.-M. and J.-D.M. thank Spanish MINECO (grant CTQ2017-87889-P) and the Generalitat de Catalunya (2017SGR1323). G.S., thanks Regione Autonoma della Sardegna (grant RASSR79857) for his postdoctoral fellowship. L. R.-M. thanks the Generalitat de Catalunya for her FI fellowship. plasmid GFP-PCNAL2 was generously provided by Dr. Cristina Cardoso. Molecular graphics with UCSF Chimera, developed by the Resource for Biocomputing, Visualization, and Informatics at the University of California, San Francisco, with support from NIH P41-GM103311. 43 We are also grateful to Prof. Peter Scott of the IAS at the University of Warwick for his insights and advice during the preparation of this manuscript., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High Dynamic Range Nanowire Resonators

  • Molina Fernández, Juan
  • Escobar, Javier Enrique
  • Ramos Vega, Daniel
  • Gil-Santos, Eduardo
  • Ruz Martínez, José Jaime
  • Tamayo de Miguel, Francisco Javier
  • San Paulo, Álvaro
  • Calleja, Montserrat
Dynamic range quantifies the linear operation regime available in nanomechanical resonators. Nonlinearities dominate the response of flexural beams in the limit of very high aspect ratio and very small diameter, which leads to expectation of low dynamic range for nanowire resonators in general. However, the highest achievable dynamic range for nanowire resonators with practical dimensions remains to be determined. We report dynamic range measurements on singly clamped silicon nanowire resonators reaching remarkably high values of up to 90 dB obtained with a simple harmonic actuation scheme. We explain these measurements by a comprehensive theoretical examination of dynamic range in singly clamped flexural beams including the effect of tapering, a usual feature of semiconductor nanowires. Our analysis reveals the nanowire characteristics required for broad linear operation, and given the relationship between dynamic range and mass sensing performance, it also enables analytical determination of mass detection limits, reaching atomic-scale resolution for feasible nanowires., This work was supported by the ERC CoG Grant 681275 “LIQUIDMASS” and by the Spanish Science, Innovation and Universities Ministry through Projects “EXOFLUX” (PGC2018-101762-B-I00) and “MOMPs” (TEC2017-89765- R). E.G.-S. acknowledges financial support by Fundación General CSIC through the ComFuturo program. We acknowledge the service from the Micro and Nanofabrication Laboratory at IMN-CNM, funded by the Comunidad de Madrid (Project S2018/NMT-4291 TEC2SPACE) and by MINECO (Project CSIC13-4E-1794 with support from FEDER, FSE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High thermoelectric efficiency in electrodeposited silver selenide films: from Pourbaix diagram to a flexible thermoelectric module

  • Manzano, Cristina V.
  • Caballero-Calero, Olga
  • Martín-González, Marisol
In the last few years, the exploration of new thermoelectric materials with low-toxicity, earth-abundance, and high-efficiency has become essential. Following this trend, sustainable, easily scalable, and costeffective fabrication methods, such as electrochemical deposition, are also desirable. In this work, the Pourbaix diagram of silver¿selenium¿water was developed to find an adequate pH and reduction potential for the electrodeposition of stable silver selenide. Based on this diagram, a solution without the incorporation of additives was developed. Silver selenide films were electrodeposited at different reduction potentials, and after the deposition, the compositional, morphological, and structural characterizations of the silver selenide thin films were analyzed. The thermoelectric properties of the electrodeposited silver selenide films were measured at room temperature. The maximum power factor was found for the films grown at 0.071 V with a value of 3421 705 mW m1 K2 and a thermal conductivity of 0.56 0.06 W m1 K1. Even better, when it can be done by employing a technique that is easily scalable to an industrial level and allows large areas to be obtained, such as electrodeposition. Finally, films with similar properties were deposited on a flexible Kapton substrate. A unileg thermoelectric power generator was produced with maximum output powers of 14.7, 29.4, and 37 mW under temperature differences of 10, 15, and 19 K, respectively; and maximum power densities of 55.1, 110.1, and 138.6 mW m2 under temperature differences of 10, 15, and 19 K, respectively., The authors would like to acknowledge financial support from MAT2017-86450-C4-3-R and CSIC PIF 2D-MESES. Cristina V. Manzano would like to acknowledge funding from “Atracci´on de Talento Investigador” de la Comunidad de Madrid, contract 2019- T1/IND-13541. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI). We acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project SpaceTec, S2013/ICE2822), MINECO (project CSIC13-4E-1794), and the EU (FEDER, FSE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic modulation of mid and far-infrared plasmon resonances using the orientational magneto optical effect

  • Armelles Reig, Gaspar
  • Cebollada, Alfonso
Arrays of in plane randomly placed aligned slits were engraved on an anisotropic magneto resistance Ni81Fe19 film, a material whose optical properties depend on the relative orientation of the light polarization and the magnetization direction (orientational magneto optical effect). In the 3-14 μm spectral range and for light polarized perpendicular to the slit axis, the reflectivity of the arrays presents a dip related to the excitation of the slit plasmon longitudinal resonance. We show that the intensity of this feature is different if the direction of the magnetization is parallel or perpendicular to the light polarization that excites this resonance. By varying the slit length, the spectral dependence of this magnetic modulation of the plasmon resonance has been analyzed. The results suggest that the orientational magneto optical effect could be used for magnetic modulation of plasmon resonances from the mid-infrared to the far-infrared spectral ranges., We acknowledge the MiNa Laboratory at IMN for the fabrication of the slits arrays and funding from MINECO under Project No. CSIC13-4E-1794 and from CM under Project No. S2013/ICE-2822 (Space-Tec), both with the support from EU (FEDER, FSE). This work has been also supported by MINECO through projects AMES (MAT 2014-58860-P), Quantum Spin Plasmonics (FIS2015-72035-EXP), MIRRAS(MAT2017-84009-R), and Comunidad de Madrid through project SINOXPHOS-CM (S2018/BAA-4403).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Micro-Kelvin Resolution at Room Temperature Using Nanomechanical Thermometry

  • Ferreiro-Vila, Elías
  • Molina Fernández, Juan
  • Weituschat, Lukas Max
  • Gil-Santos, Eduardo
  • Postigo, Pablo Aitor
  • Ramos Vega, Daniel
Ultrahigh sensitivity temperature measurement is becoming increasingly relevant for different scientific and technological fields from fundamental physics to high-precision engineering applications. Here, we demonstrate the use of a nanomechanical resonator - free standing silicon nitride membranes with thicknesses in the nanoscale - for room temperature thermometry reaching an unprecedented resolution of 15 μK. These devices were characterized by using an interferometric system at high vacuum, where there are only two possible mechanisms for heat transfer: thermal conductivity and radiation. While the expected behavior should be to decrease the frequency of the mechanical resonance due to the thermoelastic effect, we observe that the nanomechanical response can be both positive and negative depending on the thermal flux: a heat point source always shifts the mechanical resonance to lower frequencies, while a distributed heat source shifts the resonance to higher frequencies., This research is funded by the Spanish Ministry of Science under project MOMPs reference TEC2017-89765-R and the European Association of National Metrology Institutes (JRP f14 PhotOQuanT17FUN05). E.G.-S acknowledges financial support by the Spanish Ministry of Science under the project MicroBIOMS, reference PID2019-109765RA-I00. This project has received funding from the EMPIR program co-financed by the Participating States and from the European Union’s Horizon 2020 research and innovation program. The service from the Micro and Nanofabrication Laboratory (MiNa) and X-SEM Laboratory is funded by MCIU (CSIC13-4E-1794) and EU (FEDER, FSE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermal conductivity reduction by nanostructuration in electrodeposited CuNi alloys

  • Manzano, Cristina V.
  • Caballero-Calero, Olga
  • Martín-González, Marisol
In the last few years, the use of inexpensive and scalable materials in industry for thermoelectric applications has received great interest, such as CuNi alloys. In this work, nanocrystalline CuNi alloys with different compositions were grown by pulsed electrodeposition. The incorporation of saccharine in the electrolyte allowed reduction of the crystallite size of CuNi down to 30¿40 nm. The thermoelectric properties, such as the electrical conductivity, Seebeck coefficient, and thermal conductivity of these nanocrystalline alloys, were studied. The maximum figure of merit obtained at room temperature was (6.1 1.4) 102 for nanocrystalline Cu0.55Ni0.45. The thermal conductivity of CuNi alloys was reduced by the nanostructuration to a value of 9.0 0.9 W m1 K1, making these nanocrystalline CuNi alloys more competitive than other more classical thermoelectric materials. This work opens a new field to be investigated, that can be described as the use of commercial alloys such as CuNi for thermoelectric applications and shows the use of a new approach to enhance the thermoelectric properties of inexpensive and/or fewer pollutant materials, The authors would like to acknowledge financial support from MAT2017-86450-C4-3-R. C. V. M. acknowledges financial support from Juan de la Cierva Incorporacio´n grants (IJCI-2017-31350) and P. C.-S. acknowledges financial support from CSIC JAEINT19_EX_0606 grant. We acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project SpaceTec, S2013/ICE2822), MINECO (project CSIC13-4E-1794), and EU (FEDER, FSE). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3D Bi2Te3 Interconnected Nanowire Networks to Increase Thermoelectric Efficiency

  • Ruiz-Clavijo, Alejandra
  • Caballero-Calero, Olga
  • Manzano, Cristina V.
  • Maeder, Xavier
  • Beardo, Albert
  • Cartoixà, Xavier
  • Álvarez, F. Xavier
  • Martín-González, Marisol
3D interconnected nanowire scaffoldings are shown to increase the thermoelectric efficiency in comparison to similar diameter 1D nanowires and films grown under similar electrodeposition conditions. Bi2Te3 3D nanonetworks offer a reduction in thermal conductivity (¿T) while preserving the high electrical conductivity of the films. The reduction in ¿T is modeled using the hydrodynamic heat transport equation, and it can be understood as a heat viscosity effect due to the 3D nanostructuration. In addition, the Seebeck coefficient is twice that of nanowires and films, and up to 50% higher than in a single crystal. This increase is interpreted as a nonequilibrium effect that the geometry of the structure induces on the distribution function of the phonons, producing an enhanced phonon drag. These thermoelectric metamaterials have higher performance and are fabricated with large areas by a cost-effective method, which makes them suitable for up-scale production, The authors acknowledge financial support from Spanish Ministerio de Ciencia, Innovación y Universidades under Grants [PID2020-118430GB-100, RTI2018-097876-B-C22 (MCIU/AEI/FEDER, UE), and RTI2018-097876-B-C21 (MCIU/AEI/FEDER, UE)] and the CSIC project 2DMESES. Cristina V. Manzano acknowledges funding from “Atracción de Talento Investigador” de la Comunidad de Madrid, contract [2019-T1/IND-13541]. The authors ac knowledge the service from the MiNa Laboratory at IMN and funding from CM (project SpaceTec, [S2013/ICE2822]), MINECO (project [CSIC13-4E-1794]), and EU (FEDER, FSE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Resonadores Microcapilares Transparentes para la Caracterización Multiparamétrica de Células

  • Martín-Pérez, Alberto
Tesis Doctoral inédita leída en la Universidad Autónoma de Madrid, Facultad de Ciencias, Departamento de Física de Materiales. Fecha de Lectura: 23-07-2021, Los microcanales suspendidos resonantes han demostrado ser una técnica muy útil para la detección y caracterización de partículas suspendidas en medios líquidos (especialmente células) a través de la medida de su masa. Gracias a la integración de un canal microfluídico dentro de un resonador mecánico, estos dispositivos permiten aprovechar la gran sensibilidad en masa de un resonador mecánico oscilando en vacío (o atmósfera gaseosa) mientras se trabaja con partículas o células suspendidas en un medio líquido (que fluye a través del microcanal integrado en el dispositivo). En los trabajos previos al desarrollo de esta tesis doctoral en este tipo de dispositivos, sólo podían medir la masa boyante de las partículas (diferencia entre la masa de la partícula y del líquido desplazado por la misma), no obstante, este parámetro no permite una distinción unívoca entre distintos tipos de partículas ya que, partículas distintas en tamaño y material pueden presentar el mismo valor de masa boyante. Para superar este problema, en la presente tesis doctoral, Resonadores Microcapilares Transparentes para la Caracterización Multiparamétrica de Células, se proponen nuevos conceptos para el desarrollo de microcanales suspendidos resonantes a fin de conseguir la medida simultánea de múltiples parámetros físicos de estas partículas coloidales, poniendo especial interés en su aplicación a la caracterización de células en entornos fisiológicos. Para ello, se ha desarrollado un proceso de fabricación de microcanales suspendidos resonantes basado en la integración de un capilar de sílice sobre un sustrato reflectante (resonador microcapilar transparente, RMT). Para la transducción de estos dispositivos se ha empleado un sistema interferométrico, que permite medir simultáneamente y en tiempo real la frecuencia de resonancia (señal mecánica) y la potencia de luz reflejada (señal óptica) por estos dispositivos., Este trabajo ha sido apoyado por el programa de investigación e innovación de la Unión Europea Horizon 2020 del European Research Council a través del proyecto Liquidmass (681275-LIQUIDMASS-ERC-CoG-2015). Así mismo, este trabajo ha contado con el apoyo del servicio de Micro y Nanofabricación (MiNa) del IMN, el cual está financiado por la Comunidad de Madrid a través del proyecto S2013/ICE-2822 (Space-Tec) con soporte de la UE (FEDER, FSE). También se ha contado con el apoyo del laboratorio X-SEM del IMN, el cual está financiado por el MINECO a través del proyecto CSIC13-4E-1794 con soporte de la Unión Europea (FEDER, FSE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Metallic Nanostructured Electrodes for in vivo and in vitro Electrical Stimulation

  • Mobini, Sahba
  • González Sagardoy, María Ujué
  • Caballero-Calero, Olga
  • Patrick, Erin E.
  • Martín-González, Marisol
  • García Martínez, Jorge Manuel
  • García-Martín, José Miguel
Trabajo presentado en la 31st Annual Conference of the European Society for Biomaterials, celebrada virtualmente del 5 al 9 de septiembre de 2021, The use of electricity in interaction with biological systems for therapeutic and diagnostic purposes become a prominent research topic. Electrodes are key components of electrical stimulation and recording devices for in vivo and in vitro usages. Bioelectrodes should present excellent electroconductivity to be able to transfer the electrical current efficiently (charge mobility inside the device). Moreover, they need to provide excellent electroactivity to convert electronic current to ionic current at the electrode/extracellular fluid (ECF) interphase. The use of nanostructures in fabrication of bioelectrodes is beneficial, since nanostructures offer superior effective surface area that decreases impedance (Z) and increases charge storage capacity (CSC) of the electrodes. Low Z prevents irreversible faradic reactions that are harmful for biological systems (safe stimulation), and decreases thermal noises that interfere recording bioelectrical signals. Higher CSC ensures effective charge transfer (effective stimulation)1. Here we developed highly pure metallic nanostructured electrodes from Ti, Au and Pt and characterized their electrochemical properties. Electrical stimulation (ES) modes for both in vitro and in vivo applications were simulated. Finally, we present the design of an in vitro ES platform incorporating nanostructured electrodes.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Reactive Accelerated Aging Test, A Time Machine to Evaluate the Durability of Biomaterials for Neural Implants

  • Limones-Ahijón, Blanca
  • García-Martín, José Miguel
  • González Sagardoy, María Ujué
  • Mobini, Sahba
Resumen del trabajo presentado en la 31st Annual Conference of the European Society for Biomaterials, celebrada virtualmente del 5 al 9 de septiembre de 2021, Neural implants are increasingly investigated to assist patients with defects or pathologies in nervous system. There is a growing research about developing new biomaterials to improve the effectiveness and biocompatibility of neural implants. For example, inflammatory responses to implantation of these devices, also called foreign body reactions (FBR), are still a challenge for their performance. During FBR, immune cells such as monocytes and macrophages are recruited and activated, leading to several consequences. One of those is the increased amount of reactive oxygen species (ROS) due to differentiation and phagocytosis of macrophages. ROS affects the performance of neural implants in the long-term by increasing corrosion and delamination. Reactive accelerated aging tests (RAAT) are used as a tool to test the durability of bioelectrodes and neural implants, mimicking the presence of ROS in vivo. In RAAT, an H2O2 solution with high temperature can mimic several years of implantation during a few weeks due to the increased reaction rate provided by temperature. A RAAT protocol for testing neural implants has been recently approved by FDA. In this work, we have built a RAAT setup based on this protocol. We have studied different parameters that affect the stability of the system and we have employed RAAT to analyse the durability of different flat and nanostructured metallic layers.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Coexisting magnetic orders and concomitant Morin-like transition and relaxor behavior in multiferroic Aurivillius Bi4Ti3 - 2xNbxFexO12compounds

  • Algueró, Miguel
  • Pérez del Real, Rafael
  • Amorín, Harvey
  • Castro, Alicia
[EN] Aurivillius layered oxides with general formula (Bi2O2)(Am-1BmO3m+1) stand out among room-temperature magnetoelectric multiferroics for their large magnetization. However, despite extensive research, there is an obvious lack of understanding of their magnetism. The chemical design strategy for obtaining multiferroism involves the incorporation of M3+ magnetic cations at the B-site of well-known ferroelectric compounds such as Bi4Ti3O12 (m = 3). We report here a study of the magnetism and dielectric properties of Aurivillius Bi4Ti3 - 2xNbxFexO12 phases with x ≥ 1 up to 1.2, which correspond to magnetic cation fractions at the B site between 0.33 and 0.4 above the threshold for percolation. This is a three-layer system, less prone to the formation of intergrowths, which nominally contains Fe3+ as single magnetic species. Despite that, a rich phenomenology is uncovered. Coexisting magnetic orders are present in the Aurivillius compounds, and a Morin-like transition takes place at low temperatures. The dielectric characterization does not show any associated anomaly that could indicate a polymorphic phase transition but the appearance of relaxor-like characteristics. Possible scenarios are discussed, which involve the presence of Fe2+, cation partitioning between nonequivalent B-sites, and the development of polar nanodomains within a ferroelectric phase at a spin reorientation transition., Research funded by Spanish MICINN through Project No. MAT2017-88788-R. Technical support by Ms. I. Martínez at ICMM-CSIC was also recognized. Part of the FEG-SEM experiments were carried out as service from the MiNa Laboratory at IMN, which acknowledges funding from CM (Project No. S2018/NMT-4291 TEC2SPACE), MINECO (Project No. CSIC13-4E-1794), and EU (FEDER, FSE), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pepper-Mediated Green Synthesis of Selenium and Tellurium Nanoparticles with Antibacterial and Anticancer Potential

  • Shah, Veer
  • Medina Cruz, David
  • Vernet Crua, Ada
  • Truong, Linh B.
  • Sotelo, Eduardo
  • Mostafavi, Ebrahim
  • González Sagardoy, María Ujué
  • García-Martín, José Miguel
  • Cholula-Díaz, Jorge L.
  • Webster, Thomas J.
This article belongs to the Special Issue Functional Biomaterials and Biomaterial Composites with Antimicrobial Properties., The production of nanoparticles for biomedical applications (namely with antimicrobial and anticancer properties) has been significantly hampered using traditional physicochemical approaches, which often produce nanostructures with poor biocompatibility properties requiring post-synthesis functionalization to implement features that such biomedical applications require. As an alternative, green nanotechnology and the synthesis of environmentally friendly nanomaterials have been gaining attention over the last few decades, using living organisms or biomolecules derived from them, as the main raw materials to produce cost-effective, environmentally friendly, and ready-to-be-used nanomaterials. In this article and building upon previous knowledge, we have designed and implemented the synthesis of selenium and tellurium nanoparticles using extracts from fresh jalapeño and habanero peppers. After characterization, in this study, the nanoparticles were tested for both their antimicrobial and anticancer features against isolates of antibiotic-resistant bacterial strains and skin cancer cell lines, respectively. The nanosystems produced nanoparticles via a fast, eco-friendly, and cost-effective method showing different antimicrobial profiles between elements. While selenium nanoparticles lacked an antimicrobial effect at the concentrations tested, those made of tellurium produced a significant antibacterial effect even at the lowest concentration tested. These effects were correlated when the nanoparticles were tested for their cytocompatibility and anticancer properties. While selenium nanoparticles were biocompatible and had a dose-dependent anticancer effect, tellurium-based nanoparticles lacked such biocompatibility while exerting a powerful anti-cancer effect. Further, this study demonstrated a suitable mechanism of action for killing bacteria and cancer cells involving reactive oxygen species (ROS) generation. In summary, this study introduces a new green nanomedicine synthesis approach to create novel selenium and tellurium nanoparticles with attractive properties for numerous biomedical applications., The groups at CSIC and Tecnologico de Monterrey acknowledge the i-Link+2019 program (ref. LINKB20024 “NANOBIO-ROJA”) for financial support. CSIC authors thank the service from the MiNa Laboratory at IMN, funded from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794), and EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lipid biomarkers and metal pollution in the Holocene record of Cartagena Bay (SE Spain): Coupled natural and human induced environmental history in Punic and Roman times

  • Ortiz, José E.
  • Torres, Trinidad
  • Sánchez-Palencia, Yolanda
  • Ros, Milagros
  • Ramallo, Sebastián
  • López-Cilla, Ignacio
  • Galán, Luis A
  • Manteca, Ignacio
  • Rodríguez-Estrella, Tomás
  • Blázquez, Ana
  • Gómez Borrego, Ángeles
  • Ruiz-Zapata, Blanca
  • Gil, María José
We reconstructed the palaeoenvironmental conditions of Cartagena Bay during the Holocene after a multidisciplinary study to identify natural variations and the anthropic processes of this coastal area. A total of 119 samples were recovered for amino acid racemization dating, 3 for radiocarbon dating (14C), and four sets of 80 samples for sedimentological and palaeontological determination, mineralogical content, biomarker and trace elements quantification. Two natural scenarios were identified from the variations of n-alkane indices and palaeobiological content. The first period (6650-5750 yr cal BP) was marked by the development of euhaline marine conditions with strong inputs from aquatic macrophytes and high biodiversity. After a hiatus, the area underwent a profound change, becoming a paucispecific brackish marsh environment with increasing inputs from land plants, with possible episodes of emersion with a greater presence from terrestrial gastropods (3600-300 cal yr BP). By combining trace element abundance and stanol distributions, our study also provides a novel approach to identify the predominant influence of anthropogenic factors in the last three millennia in the coastal record of Cartagena Bay. Findings confirmed that Pb mining and metallurgy began during the Bronze Age, with considerable inputs of this heavy metal into the atmosphere during Phoenician, Punic and particularly Roman times compared to the Middle Ages. Pollution by Cu and Zn was also observed during Punic and Roman times, and was first documented in the Middle Ages. In addition, faecal stanols, such as coprostanol, derived mainly from humans, and 24-ethylcoprostanol from herbivores were present, thereby indicating for the first time a continuous presence of human populations and significant pollution input since 3600 yr cal BP, this being greater in the late Bronze Age and Phoenician, Punic and Roman times than during Late Antiquity and the Middle Ages, when the city was in decline., This paper was made possible by Grant HAR2017-85726-C2-2-P (Cambios ambientales y ocupación humana en el sector central del sureste ibérico) funded by MCIN/AEI/10.13039/501100011033 and by Grant HAR2017-85726-C2-1-P (Carthago Nova desde su entorno litoral: Paleotopografía y evolución medioambiental del Sector central del Sureste Ibérico. Dinámica poblacional y productiva) funded by MCIN/AEI/10.13039/501100011033. XRF core scanner equipment was co-financed by the European Regional Development Fund via the Spanish National Plan for Scientific and Technical Research and Innovation 2013–2016 (IGME13-4E-2576)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-throughput determination of dry mass of single bacterial cells by ultrathin membrane resonators

  • Sanz-Jiménez, Adrián
  • Malvar, Óscar
  • Ruz Martínez, José Jaime
  • García-López, Sergio
  • Kosaka, Priscila M.
  • Gil-Santos, Eduardo
  • Cano-Tortajada, Álvaro
  • San Paulo, Álvaro
  • Calleja, Montserrat
  • Tamayo de Miguel, Francisco Javier
How bacteria are able to maintain their size remains an open question. Techniques that can measure the biomass (dry mass) of single cells with high precision and high-throughput are demanded to elucidate this question. Here, we present a technological approach that combines the transport, guiding and focusing of individual bacteria from solution to the surface of an ultrathin silicon nitride membrane resonator in vacuum. The resonance frequencies of the membrane undergo abrupt variations at the instants where single cells land on the membrane surface. The resonator design displays a quasi-symmetric rectangular shape with an extraordinary capture area of 0.14 mm2, while maintaining a high mass resolution of 0.7 fg (1 fg = 10−15 g) to precisely resolve the dry mass of single cells. The small rectangularity of the membrane provides unprecedented frequency density of vibration modes that enables to retrieve the mass of individual cells with high accuracy by specially developed inverse problem theory. We apply this approach for profiling the dry mass distribution in Staphylococcus epidermidis and Escherichia coli cells. The technique allows the determination of the dry mass of single bacterial cells with an accuracy of about 1% at an unparalleled throughput of 20 cells/min. Finally, we revisit Koch & Schaechter model developed during 60 s to assess the intrinsic sources of stochasticity that originate cell size heterogeneity in steady-state populations. The results reveal the importance of mass resolution to correctly describe these mechanisms., This work was supported by the European Union’s Horizon 2020 Research and Innovation Program under Grant Agreement No. 731868—VIRUSCAN and by the ERC CoG Grant 681275 “LIQUIDMASS”. We acknowledge the service from the Micro and Nanofabrication Laboratory an X-SEM laboratory at IMN-CNM funded by the Comunidad de Madrid (Project S2018/NMT-4291 TEC2SPACE) and by MINECO (Project CSIC13-4E-1794 with support from FEDER, FSE). E.G.S. acknowledges financial support by the Spanish Science and Innovation Ministry through Ramón y Cajal grant RYC-2019-026626-I.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bacterial-mediated Selenium Nanoparticles as Highly Selective Antimicrobial Agents with Anticancer Properties

  • Medina Cruz, David
  • Truong, Linh B.
  • Sotelo, Eduardo
  • Martínez Orellana, Lidia
  • González Sagardoy, María Ujué
  • Huttel, Yves
  • Webster, Thomas J.
  • García-Martín, José Miguel
  • Cholula-Díaz, Jorge L.
The green synthesis of nanomaterials offers advantages over traditional chemical methods, such as the production of biocompatible nanostructures in an environmentally friendly and cost-effective manner. Among all of the available green synthesis routes, the use of bacteria offers a high-throughput and versatile synthesis of nanoparticles that can be used in a wide range of biomedical approaches. In this article, we present a controllable and versatile synthesis of selenium nanoparticles (SeNPs) using bacterial isolates of both Gram negative and Gram positive bacteria. The SeNPs were characterized in terms of their physicochemical properties and tested in both antimicrobial and cytotoxicity assays, showing a selective dose-dependent antibacterial activity in a selected range of concentrations (especially when SeNPs synthesized by a particular bacterial isolate were exposed to that isolate) and a mild cytotoxicity when exposed to human dermal fibroblasts. Furthermore, the SeNPs were tested for their anticancer activity by exposure to melanoma cells (skin cancer) in in vitro models, showing a significant dose¿response cytotoxic behavior that was associated to the production of reactive oxygen species. Therefore, this work presents a robust and versatile method to produce SeNPs using selected bacterial isolates for numerous biomedical applications., The authors from Tecnologico de Monterrey and CSIC thank the bilateral project BILTC22001 for funding. The authors from Tecnologico de Monterrey also thank the Department of Sciences – Chemistry and Nanotechnology at Tecnologico de Monterrey, campus Monterrey. TJW thanks Art Zaropoulo for funding. The authors acknowledge the service from the MiNa Laboratory at IMN, funded from CM (project SpaceTec, S2018/ NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794), and EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Spherical gallium nanodroplets

  • García Martínez, Jorge Manuel
  • Fuster, David
  • Dotor-Castilla, María Luisa
  • Méndez, Javier
  • González Díez, Yolanda
Trabajo presentado en el 21st European Workshop on Molecular Beam Epitaxy (EuroMBE 2023), celebrado en Madrid (España), del 16 al 19 de abril de 2023, Gallium (Ga) nanoparticles has unique characteristics that could enable new devices based on phase changes, such as optical switches and memories and active plasmonic platforms [1]. Gallium is also a very interesting material for its biocompatibility properties and many other applications [2]. We show the fabrication by MBE of gallium nanodroplets on GaAs(001) by droplet epitaxy [3, 4]. Furthermore, it is possible to control the shape of the nanodroplets by changing the wettability of Ga over the surface by evaporation of one monolayer of carbon [3] prior to the droplet formation. This effect is used for obtaining almost perfectly spherical Ga nanodroplets on GaAs and could be used in many other substrates. We acknowledge the following projects: MAT2015-67021-R, S2018/NMT-4291 TEC2SPACE, CSIC13- 4E-1794, RTI2018-096937-B-C22, PID2021-124193OB-C22 and P2018/EMT-4308. References [1] Maria Losurdo, et al., ¿Thermally stable coexistence of liquid and solid phases in gallium nanoparticles¿, Nature Mat., Vol. 15, pp. 995-1002, 2016. [2] Michael D. Dickey, ¿Liquid metals at room temperature¿, Physics Today Vol. 74, 4, pp. 30- 36, 2021. [3] D. Fuster et al., ¿Optimization of a carbon evaporator cell for MBE growth¿, Vacuum, Vol. 181, pp. 109653(1)-109653(8), 2020. [4] D. Fuster, et al., ¿Fundamental role of arsenic flux in nanohole formation by Ga droplet etching on GaAs (001),¿ Nanoscale Res Lett. Vol. 9, pp. 309(1)-309(6), 2014., Service from the MiNa Laboratory at IMN (funding from CM), X-SEM Laboratory and funding projects MAT2015-67021-R, S2018/NMT-4291, TEC2SPACE, CSIC13-4E-1794, RTI2018-096937-B-C22, PID2021-124193OB-C22 and P2018/EMT-4308
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Domain wall propagation and pinning induced by current pulses in cylindrical modulated nanowires

  • Bran, Cristina
  • Fernández-Roldán, José A.
  • Moreno, J. A.
  • Fraile Rodríguez, A.
  • Pérez del Real, Rafael
  • Asenjo Barahona, Agustina
  • Saugar, Elías
  • Marqués-Marchán, Jorge
  • Foerster, Michael
  • Aballe, Lucía
  • Kosel, J.
  • Vázquez Villalabeitia, Manuel
  • Chubykalo-Fesenko, O.
The future developments in 3D magnetic nanotechnology require the control of domain wall dynamics by means of current pulses. While this has been extensively studied in 2D magnetic strips (planar nanowires), few reports on this exist in cylindrical geometry, where Bloch point domain walls are expected to have intriguing properties. Here, we report an investigation on cylindrical magnetic Ni nanowires with geometrical notches. An experimental work based on synchrotron X-ray magnetic circular dichroism (XMCD) combined with photoemission electron microscopy (PEEM) indicates that large current densities induce domain wall nucleation, while smaller currents move domain walls preferably antiparallel to the current direction. In the region where no pinning centers are present, we found a domain wall velocity of about 1 km s. Thermal modelling indicates that large current densities temporarily raise the temperature in the nanowire above the Curie temperature, leading to nucleation of domain walls during the system cooling. Micromagnetic modelling with a spin-torque effect shows that for intermediate current densities, Bloch point domain walls with chirality parallel to the Oersted field propagate antiparallel to the current direction. In other cases, domain walls can be bounced from the notches and/or get pinned outside their positions. We thus found that current is not only responsible for domain wall propagation, but also is a source of pinning due to the Oersted field action., Grants PID2019-108075RB-C31 funded by the Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033 and S2018/NMT-4321 NANOMAGCOST-CM funded by the Government of Madrid Region, Spain. We acknowledge the service from the MiNa Laboratory at IMN and the funding from CM (project SpaceTec, S2013/ICE2822), MINECO (project CSIC13-4E-1794), and EU (FEDER, FSE)., Electronic supplementary information (ESI) available. See DOI: https://doi.org/10.1039/d3nr00455d, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanomechanical Sensing for Mass Flow Control in Nanowire-Based Open Nanofluidic Systems

  • Escobar, Javier Enrique
  • Molina Fernández, Juan
  • Gil-Santos, Eduardo
  • Ruz Martínez, José Jaime
  • Malvar, Óscar
  • Kosaka, Priscila M.
  • Tamayo de Miguel, Francisco Javier
  • San Paulo, Álvaro
  • Calleja, Montserrat
Open nanofluidic systems, where liquids flow along the outer surface of nanoscale structures, provide otherwise unfeasible capabilities for extremely miniaturized liquid handling applications. A critical step toward fully functional applications is to obtain quantitative mass flow control. We demonstrate the application of nanomechanical sensing for this purpose by integrating voltage-driven liquid flow along nanowire open channels with mass detection based on flexural resonators. This approach is validated by assembling the nanowires with microcantilever resonators, enabling high-precision control of larger flows, and by using the nanowires as resonators themselves, allowing extremely small liquid volume handling. Both implementations are demonstrated by characterizing voltage-driven flow of ionic liquids along the surface of the nanowires. We find a voltage range where mass flow rate follows a nonlinear monotonic increase, establishing a steady flow regime for which we show mass flow control at rates from below 1 ag/s to above 100 fg/s and precise liquid handling down to the zeptoliter scale. The observed behavior of mass flow rate is consistent with a voltage-induced transition from static wetting to dynamic spreading as the mechanism underlying liquid transport along the nanowires., This work was supported by European Research Council through ERC CoG Grant 681275; project PID2021- 128395OB-I00 funded by MCIN/AEI/10.13039/ 501100011033/FEDER, UE; Projects PDC2022-133944-I00 and PLEC2021-007892 funded by MCIN/AEI/10.13039/ 501100011033 and European Union “NextGenerationEU”/ PRTR; Project Y2020/BIO-65194 funded by Comunidad de Madrid; Grant RYC-2019-026626-I funded by MCIN; Project AES (DTS21/00136) funded by ISCIII/Unión Europea/ FEDER. We acknowledge the service from the Micro and Nanofabrication Laboratory at IMN-CNM, funded by the Comunidad de Madrid (Project S2018/NMT-4291 TEC2- SPACE) and by MINECO (project CSIC13-4E-1794 with support from FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybrid hydrogels support neural cell culture development under magnetic actuation at high frequency

  • Martínez-Ramírez, Julia
  • Toldos-Torres, Marta
  • Benayas, Esther
  • Villar-Gómez, Natalia
  • Fernández-Méndez, Laura
  • Espinosa, Francisco M.
  • García García, Ricardo
  • Veintemillas-Verdaguer, S.
  • Morales, María Del Puerto
  • Serrano, María C.
The combination of hydrogels and magnetic nanoparticles, scarcely explored to date, offers a wide range of possibilities for innovative therapies. Herein, we have designed hybrid 3D matrices integrating natural polymers, such as collagen, chitosan (CHI) and hyaluronic acid (HA), to provide soft and flexible 3D networks mimicking the extracellular matrix of natural tissues, and iron oxide nanoparticles (IONPs) that deliver localized heat when exposed to an alternating magnetic field (AMF). First, colloidally stable nanoparticles with a hydrodynamic radius of ∼20 nm were synthesized and coated with either CHI (NPCHI) or HA (NPHA). Then, collagen hydrogels were homogeneously loaded with these coated-IONPs resulting in soft (E0 ∼ 2.6 kPa), biodegradable and magnetically responsive matrices. Polymer-coated IONPs in suspension preserved primary neural cell viability and neural differentiation even at the highest dose (0.1 mg Fe/mL), regardless of the coating, even boosting neuronal interconnectivity at lower doses. Magnetic hydrogels maintained high neural cell viability and sustained the formation of highly interconnected and differentiated neuronal networks. Interestingly, those hydrogels loaded with the highest dose of NPHA (0.25 mgFe/mg polymer) significantly impaired non-neuronal differentiation with respect to those with NPCHI. When evaluated under AMF, cell viability slightly diminished in comparison with control hydrogels magnetically stimulated, but not compared to their counterparts without stimulation. Neuronal differentiation under AMF was only affected on collagen hydrogels with the highest dose of NPHA, while non-neuronal differentiation regained control values. Taken together, NPCHI-loaded hydrogels displayed a superior performance, maybe benefited from their higher nanomechanical fluidity. STATEMENT OF SIGNIFICANCE: Hydrogels and magnetic nanoparticles are undoubtedly useful biomaterials for biomedical applications. Nonetheless, the combination of both has been scarcely explored to date. In this study, we have designed hybrid 3D matrices integrating both components as promising magnetically responsive platforms for neural therapeutics. The resulting collagen scaffolds were soft (E0 ∼ 2.6 kPa) and biodegradable hydrogels with capacity to respond to external magnetic stimuli. Primary neural cells proved to grow on these substrates, preserving high viability and neuronal differentiation percentages even under the application of a high-frequency alternating magnetic field. Importantly, those hydrogels loaded with chitosan-coated iron oxide nanoparticles displayed a superior performance, likely related to their higher nanomechanical fluidity., The MiNa Laboratory at IMN-CSIC acknowledges its funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE). Authors are grateful to Inmaculada Aranaz from the Universidad Complutense de Madrid for assistance with chitosan characterization studies. EB acknowledges Ministerio de Ciencia e Innovación of Spain for an FPI fellowship associated to grant PID2020-113480RB-I00. MTT acknowledges Comunidad de Madrid for a contract from the Programa Investigo and NVG and JMR acknowledge CSIC for a JAE-Intro ICU and a JAE-Intro ICU Nanomed CSIC Hub fellowships, respectively., This work has received funding from the European Union's Horizon Europe research and Innovation Programme under grant agreement No. 101098597. It has been also supported by grant PID2020-113480RB-I00 funded by MCIN/AEI/10.13039/501100011033/., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ether cleavage and chemical removal of SU-8

  • Ripalda, José María
  • Álvaro Bruna, Raquel
  • Dotor-Castilla, María Luisa
The high chemical stability of SU-8 makes it irreplaceable for a wide range of applications, most notably as a lithography photoresist for micro and nanotechnology. This advantage becomes a problem when there is a need to remove SU-8 from the fabricated devices. Researchers have been struggling for two decades with this problem, and although a number of partial solutions have been found, this difficulty has limited the applications of SU-8. Here we demonstrate a fast, reproducible, and comparatively gentle method to chemically remove SU-8 photoresist. An ether cleavage mechanism for the observed reaction is proposed, and the hypothesis is tested with ab initio quantum chemical calculations. We also describe a complementary removal method based on atomic hydrogen inductively coupled plasma., Funding was provided by the Comunidad de Madrid (P2018/EMT- 4308), the Spanish Ministerio de Ciencia e Innovación (MCIU-AEI) and the European Union (FEDER) through projects PID2021-124193OB-C22 and TED2021-130623B-I00. We acknowledge the service from the MiNa Laboratory at IMN made possible by funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Detección de Modos de Vibración de Células Tumorales mediante Resonadores Micromecánicos

  • Puerto Belda, Verónica
Trabajo presentado para lograr el título de Doctor por la Universidad Autónoma de Madrid, Departamentos de Física de la Materia Condensada y Física Teórica de la Materia Condensada, Programa de Doctorado en Física de la Materia Condensada, Nanociencia y Biofísica.--2023-10-27.--©2023 Verónica Puerto Belda Todos los derechos reservados / All rights reserved, Todos los objetos presentan modos de vibración que dependen de sus propiedades mecánicas, densidad, tamaño y forma. Un caso práctico en el que se emplean estos modos son los resonadores micro y nanomecánicos, los cuales han demostrado ser una herramienta muy útil para la detección y caracterización de entidades biológicas. En concreto, en los últimos años se ha logrado medir la masa, las propiedades mecánicas y vibracionales de entidades biológicas muy variadas. Al centrarse en las propiedades vibracionales de entidades biológicas, se ha conseguido medir la frecuencia de resonancia y el factor de calidad de modos de vibración de bacterias en aire. Desde hace más de medio siglo se cuestiona si las células exhiben modos de vibración. Ahora bien, la dificultad de medir las propiedades vibracionales de una célula viva en sus condiciones fisiológicas ha generado dificultades a la hora de responder esa cuestión. La necesidad de sumergir el dispositivo de medida y la célula en el medio de cultivo correspondiente, produce una gran disipación de energía debido a la presión hidrodinámica, dificultando la obtención de una respuesta concluyente. Por otra parte, las células eucariotas son estructuras extremadamente complejas que contienen múltiples estructuras internas. En su interior coexisten las fases sólida y líquida, y su respuesta ante estímulos mecánicos muestra un comportamiento viscoelástico. En consecuencia, en el caso de que las células vivas eucariotas puedan manifestar modos de vibración, su huella sería sumamente sutil debido a la importante disipación de energía que se produce como resultado de la viscoelasticidad celular y el amortiguamiento hidrodinámico del fluido circundante., En la presente tesis doctoral, se han observado esas huellas sutiles y se ha conseguido determinar las propiedades vibracionales de células humanas epiteliales de mama vivas en sus condiciones fisiológicas, confirmando la existencia de modos de vibración en la célula eucariota. Para ello, se ha medido el espectro de frecuencia de las fluctuaciones térmicas de las deflexiones de una micropalanca, en el medio de cultivo correspondiente, antes y después de adherir una única célula a la superficie funcionalizada del resonador. Al analizar las fluctuaciones térmicas de la palanca con la célula adherida en el rango de altas frecuencias, 5 − 800 kHz, se han observado anomalías que están relacionadas con la existencia de modos de vibración de la célula. Para poder entender estas anomalías, ha sido necesario el desarrollo de un modelo teórico que explique la interacción mecánica entre la célula viva (material viscoelástico) y el resonador en un amplio rango de frecuencias. A partir del modelo se consigue obtener la frecuencia de resonancia y la disipación de los dos modos de vibración principales de la célula viva adherida al resonador durante el proceso de adhesión, además de otros parámetros físicos. El método aplica para una célula viva individual adherida a un resonador. Adicionalmente, se han utilizado células humanas epiteliales de mama con distinto grado de malignidad: sanas (MCF-10A), tumorales no invasivas (MCF-7) y metastásicas (MDA-MB-231). Curiosamente, al analizar cada línea celular de forma individual, se han logrado observar diferencias entre las propiedades vibracionales de las células humanas epiteliales de mama sanas y tumorales, abriendo muchas vías para la comprensión de la mecanobiología de una única célula, el fingerprinting físico, así como terapias de ultrasonido., Este trabajo se ha llevado a cabo gracias a la beca predoctoral para la formación de investigadores (FPI, PRE2019-087448) a través del proyecto RTI2018-099369-B-I00. Y ha sido apoyada por el programa de investigación e innovación de la Unión Europea Horizon 2020 mediante el proyecto European Research Council 731868-VIRUSCAN y la Asociación Elena Torres por la investigación contra el cáncer. Agradecer el servicio del laboratorio X-SEM del IMN-CNM financiado por la Comunidad de Madrid (Proyecto S2018/NMT- 4291 TEC2SPACE) y por el MINECO (Proyecto CSIC13-4E- 1794 con apoyo de FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rapid and simple viral protein detection by functionalized 2D MoS2/graphene electrochemiluminescence aptasensor

  • Gutiérrez-Gálvez, Laura
  • El Hajioui-El Ghalbzouri, Hanaa
  • Enebral-Romero, Estefanía
  • Garrido, Marina
  • Naranjo, Alicia
  • López-Diego, David
  • Luna, Mónica
  • Pérez, Emilio M.
  • García-Mendiola, Tania
  • Lorenzo, Encarnación
In this work we present the development of an electrochemiluminescence aptasensor based on electrografting molybdenum disulphide nanosheets functionalized with diazonium salt (MoS2-N2+) upon screen-printed electrodes of graphene (SPEs GPH) for viral proteins detection. In brief, this aptasensor consists of SPEs GPH electrografted with MoS2-N2+ and modified with a thiolated aptamer, which can specifically recognize the target protein analyte. In this case, we have used SARS-CoV-2 spike protein as model protein. Electrochemiluminescence detection was performed by using the [Ru(bpy)3]2+/TPRA (tripropylamine) system, which allows the specific detection of the SARS-CoV-2 spike protein easily and rapidly with a detection limit of 9.74 fg/mL and a linear range from 32.5 fg/mL to 50.0 pg/mL. Moreover, the applicability of the aptasensor has been confirmed by the detection of the protein directly in human saliva samples. Comparing our device with a traditional saliva antigen test, our aptasensor can detect the spike protein even when the saliva antigen test gives a negative result., This work has been financially supported by the Spanish Ministry of Economy and Competitiveness (PID2020-116728RB-I00, RED2022-134120-T) and Community of Madrid (TRANSNANOAVANSENS (S2018/NMT-4349) and FotoArt (P2018/NMT-4367)). E.M.P. acknowledges funding from the Ministerio de Ciencia, Innovación y Universidades (PID2020-116661RB-I00), and Comunidad de Madrid “Materiales Disruptivos Bidimensionales (2D)” (MAD2D-CM)-UAM and (MAD2D-CM)-IMDEA-NC funded by the Recovery, Transformation and Resilience Plan, and by NextGenerationEU from the European Union. IMDEA Nanoscience acknowledges support from the ‘‘Severo Ochoa’’ Programme for Centres of Excellence in R&D CEX2020-001039-S. We also acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Performance and Relative Humidity Impact of Cellulose-Derivative Networks in All-Day Passive Radiative Cooling

  • Manzano, Cristina V.
  • Díaz-Lobo, Alba
  • Gil-García, Marta
  • Rodríguez de la Fuente, Óscar
  • Morales-Sabio, Ángel
  • Martín-González, Marisol
All-day passive daytime radiative coolers (PDRC) offer a promising solution for energy-free cooling of buildings and devices. This study investigates the use of various cellulose-derivative networks to achieve optimal and stable cooling performance. These results showed that the mixed cellulose ester network has a maximum solar reflectance of 97%. While cellulose acetate network has a maximum infrared emissivity of 96% in the atmospheric transparency window band, which is a near-perfect infrared emitter, the nitrocellulose network shows the highest cooling temperature, with a significant reduction of 14 °C from the ambient temperature and a power of 124 W·m−2 during the daytime and at night of 7.7 °C and 72.8 W·m−2. This study also analyzes the dampness's effect on the cooling performance of cellulose-derivative networks. The cooling performance of the nitrocellulose network drops ≈ 3 °C (from 14 to 11.3 °C) when the relative humidity of the day exceeds ≈ 30% is observed. These findings indicate that the capacity of a material to absorb water from the surrounding air significantly influences its performance as a passive cooler, primarily due to changes in its optical properties. This is an important insight, as it highlights the need to consider environmental factors like relative humidity and sample hydrophobicity for PDRC systems., C.V.M acknowledges financial support from “ERC Consolidator Grant No.101087974 COOLed” and from “Atracción de Talento Investigador” de la Comunidad de Madrid, contract 2019-T1/IND-13541. M.S.M.G acknowl-edge the MERGE project PID2020-118430GB-100. The authors acknowl-edge the service from the MiNa Laboratory at IMN, and funding from CM(project SpaceTec, S2013/ICE2822), MINECO (project CSIC13-4E-1794)and EU (FEDER, FSE). And the CSIC for the article processing charges., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metallic Coatings Boost the Cooling Power of Nanoporous Alumina

  • Díaz-Lobo, Alba
  • Martín-González, Marisol
  • Song, Qimeng
  • Morales-Sabio, Ángel
  • Retsch, Markus
  • Manzano, Cristina V.
Passive daytime radiative cooling (PDRC) has emerged as a promising strategy to mitigate the increasing impact of heat waves. However, achieving effective PDRCs requires cost-effective, ecofriendly, and industrially scalable materials. In this study, we investigate the potential of anodic aluminum oxide (AAO) nanostructures coated with metals as passive radiative coolers. We explore the effects of different metallic coatings (Al and Au) with varying thicknesses (ranging from 20 to 100 nm) on the cooling performance of the AAO nanostructures. Our finding reveals a maximum temperature reduction (ΔT) of 12.5 °C for 60 nm of Au coating. Furthermore, we demonstrate the dependence of the cooling performance on ambient temperature, emphasizing the practical benefits of these enhanced AAO-based radiative coolers for real-world applications. Notably, our results surpass previous works, offering an avenue to enhance the PDRC capability., The authors would like to acknowledge financial support from“Atracción de Talento Investigador” de la Comunidad deMadrid, contract 2019-T1/IND-13541 and the iMOVE23088CSIC grant. We acknowledge the service from the MiNaLaboratory at IMN and funding from CM (project SpaceTec,S2013/ICE2822), MINECO (project CSIC13-4E-1794), andEU (FEDER, FSE). Q.S. and M.R. acknowledge financialsupport from the European Research Council (ERC) underthe European Union’s Horizon 2020 research and innovationprogram (grant agreement no. 101082087). We also acknowl-edge support of the publication fee by the CSIC Open AccessPublication Support Initiative through its Unit of InformationResources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bismuthene - Tetrahedral DNA nanobioconjugate for virus detection

  • Enebral-Romero, Estefanía
  • García-Fernández, Daniel
  • Gutiérrez-Gálvez, Laura
  • López-Diego, David
  • Luna, Mónica
  • García-Martín, Adrián
  • Salagre, Elena
  • Michel, Enrique G.
  • Torres, Íñigo
  • Zamora, Félix
  • García-Mendiola, Tania
  • Lorenzo, Encarnación
In this work, we present an electrochemical sensor for fast, low-cost, and easy detection of the SARS-CoV-2 spike protein in infected patients. The sensor is based on a selected combination of nanomaterials with a specific purpose. A bioconjugate formed by Few-layer bismuthene nanosheets (FLB) and tetrahedral DNA nanostructures (TDNs) is immobilized on Carbon Screen-Printed Electrodes (CSPE). The TDNs contain on the top vertex an aptamer that specifically binds to the SARS-CoV-2 spike protein, and a thiol group at the three basal vertices to anchor to the FLB. The TDNs are also marked with a redox indicator, Azure A (AA), which allows the direct detection of SARS-CoV-2 spike protein through changes in the current intensity of its electrolysis before and after the biorecognition reaction. The developed sensor can detect SARS-CoV-2 spike protein with a detection limit of 1.74 fg mL-1 directly in nasopharyngeal swab human samples. Therefore, this study offers a new strategy for rapid virus detection since it is versatile enough for different viruses and pathogens., This work has been financially supported by the Spanish Ministry of Economy and Competitiveness (PID2020-116728RB-I00, RED2022-134120-T), Spanish Ministry of Science, Innovation and Universities (TED2021-129738B–I00) and Community of Madrid (REACT-UE NANOCOV-CM, TRANSNANOAVANSENS, S2018/NMT-4349). Estefanía Enebral-Romero thanks the financial support of “Nanotecnología para detección del SARS-CoV-2 y sus variantes. NANOCOV” project and a contract as a predoctoral researcher funded by grant CEX2020-001039-S, supported by MCIN/AEI/10.13039/501100011033. Laura Gutiérrez-Gálvez was supported by a Formación del Profesorado Universitario (FPU) grant from the Spanish Ministry of Universities (FPU19/06309). Daniel García-Fernández and Adrián García-Martín were supported by a Programa Investigo grant from Autonomous Community of Madrid in the framework of the Plan de Recuperación, Transformación y Resiliencia financed by the European Union – NextGenerationEU (09-PIN1-00013.4/2022- 83rd and 66rd place, respectively). The authors acknowledge the support of the European Union (EU) and Horizon 2020 through Instruct Proposal PID: 21859, and the CRIOMECORR project (ESFRI-2019-01-CSIC-16) to the cryoEM CNB-CSIC facility. F. Z. acknowledges financial support from the Spanish Ministry of Science and Innovation, through the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2023-001316-M, PDC2021-120782-C21, and PID2022-138908NB-C31), the “(MAD2D-CM)-UAM” project funded by Comunidad de Madrid, by the Recovery, Transformation and Resilience Plan, and by NextGenerationEU from the European Union. F.Z. also acknowledge support from the European Innovation Council under grant Agreement 101047081 (EVA). EGM acknowledges financial support from the Spanish Ministry of Science and Innovation, through the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2018-000805-M) and through grant PID2021-123295NB-I00. We also acknowledge María U. González help with Fluorescence Microscopy and the service from the MiNa Laboratory at IMN, and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

All-Optical Domain Inversion in LiNbO3 Crystals by Visible Continuous-Wave Laser Irradiation

  • Sebastián-Vicente, Carlos
  • Imbrock, Jörg
  • Laubrock, Simon
  • Caballero-Calero, Olga
  • García-Cabañes, Ángel
  • Carrascosa, Mercedes
LiNbO3 is a distinguished multifunctional material where ferroelectric domain engineering is of paramount importance. This degree of freedom of the spontaneous polarization remarkably enhances the applicability of LiNbO3, for instance, in photonics. In this work, we report the first method for all-optical domain inversion of LiNbO3 crystals using continuous-wave visible light. While we focus mainly on iron-doped LiNbO3, the applicability of the method is also showcased in undoped congruent LiNbO3. The technique is simple, cheap, and readily accessible. It relies on ubiquitous elements: a light source with low/moderate intensity, basic optics, and a conductive surrounding medium, e.g., water. Light-induced domain inversion is unequivocally demonstrated and characterized by combination of several experimental techniques: selective chemical etching, surface topography profilometry, pyroelectric trapping of charged microparticles, scanning electron microscopy, and 3D Čerenkov microscopy. The influence of light intensity, exposure time, laser spot size, and surrounding medium is thoroughly studied. To explain all-optical domain inversion, we propose a novel physical mechanism based on an anomalous interplay between the bulk photovoltaic effect and external electrostatic screening. Overall, our all-optical method offers straightforward implementation of LiNbO3 ferroelectric domain engineering, potentially sparking new research endeavors aimed at novel optoelectronic applications of photovoltaic LiNbO3 platforms., Financial support for this research project is gratefullyacknowledged: grant PID2020-116192RB-I00 by MCIN/AEI/10.13039/501100011033 and grant TED2021-129937B−I00by MCIN/AEI/10.13039/501100011033 and EU (FEDER,FSE). C.S.-V. also thanks financial support through his FPUcontract (FPU19/03940) and his grant for a research stay inMü nster (EST23/00644). Also, the authors acknowledge theservice from the MiNa Laboratory at IMN, and funding fromCM (project S2018/NMT-4291 TEC2SPACE), MINECO(project CSIC13-4E-1794), and EU (FEDER, FSE). Likewise,the authors express their gratitude to Fernando Moreno forkindly conducting the surface profilometry measurements, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rapid mechanical phenotyping of breast cancer cells based on stochastic intracellular fluctuations

  • Cano-Tortajada, Álvaro
  • Yubero, Marina L.
  • Millá, Carmen
  • Puerto Belda, Verónica
  • Ruz Martínez, José Jaime
  • Kosaka, Priscila M.
  • Calleja, Montserrat
  • Malumbres, Marcos
  • Tamayo de Miguel, Francisco Javier
Predicting the phenotypic impact of genetic variants and treatments is crucial in cancer genetics and precision oncology. Here, we have developed a noise decorrelation method that enables quantitative phase imaging (QPI) with the capability for label-free noninvasive mapping of intracellular dry mass fluctuations within the millisecond-to-second timescale regime, previously inaccessible due to temporal phase noise. Applied to breast cancer cells, this method revealed regions driven by thermal forces and regions of intense activity fueled by ATP hydrolysis. Intriguingly, as malignancy increases, the cells strategically expand these active regions to satisfy increasing energy demands. We propose parameters encapsulating key information about the spatiotemporal distribution of intracellular fluctuations, enabling precise phenotyping. This technique addresses the need for accurate, rapid functional screening methods in cancer medicine., This work was partially supported by the Spanish Science and Innovation Ministry through projects RTI2018-099369-B-I00 (related doctoral fellowship [FPI] PRE2019-087448), AES (DTS21/00136)/ISCIII/EU/FEDER, “CELLBIOPHYS” (PID2021-126993OB-I00/MCIN/AEI/10.13039/501100011033/FEDER, UE), “ONCOLIGHT” (PDC2022-133503- I00/MCIN/AEI/10.13039/501100011033/European Union/Next Generation EU/PRTR), and “ONCODEEPLASM” (PLEC2021- 007892/MCIN/AEI/10.13039/501100011033/European Union/Next Generation EU/PRTR) and by Comunidad Autónoma de Madrid (Y2020/BIO- 65194 scCANCER-CM). This work has also been supported by private FERO Foundation and Elena Torres Cancer Association funding. We acknowledge the service from the Micro and Nanofabrication Laboratory and X-SEM laboratory at IMN-CNM funded by the Comunidad Autónoma de Madrid (project S2018/NMT-4291 TEC2SPACE) and by MINECO (project CSIC13-4E-1794 with support from FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermoelectric bismuth telluride nanostructures fabricated by electrodeposition within flexible templates

  • Cerviño Solana, Pablo
  • Ramírez-Peral, María Jesús
  • Martín-González, Marisol
  • Caballero-Calero, Olga
Bismuth telluride, a highly efficient thermoelectric material, stands out for applications around room temperature in wearable devices. By harnessing the thermal gradient established between the human body and ambient temperature, we can generate useable electricity. Notably, bismuth telluride nanostructures exhibit significantly lower thermal conductivities compared to their bulk counterparts. As a result, the thermoelectric efficiency achieved is notably higher. Our research focuses on developing efficient nanostructured materials based on bismuth telluride inside a flexible substrate made of polyester. We employ scalable methods, such as template-assisted electrochemical deposition, to fabricate these nanostructures. In this study, we present an approach to the development of flexible nanostructured thermoelectric materials. Despite using a reduced quantity of active material, our electrochemically deposited nanostructures inside a flexible template demonstrate a remarkable performance. They exhibit 24 % of the Power Factor reported for conventional electrochemically fabricated Bi2Te3 thin films, and notably, they even surpass the Power Factor reported for flexible Bi2Te3-based inks used in the creation of flexible generators. This achievement underscores the potential of our method in the advancement of efficient, flexible thermoelectric devices., This work has been supported by the Ramon Areces Foundation through the micro-TENERGY project. The authors would like to acknowledge the service from the MiNa Laboratory at IMN, and its funding from CM (project SpaceTec, S2013/ICE2822), MINECO (project CSIC13-4E-1794), and EU (FEDER, FSE). We also acknowledge the funding by the MINECO under grant number PID2020-118430 GB-100. O.C–C would also like to acknowledge fruitful discussions with David López Romero and the assistance with the SEM microscope from Raquel Álvaro Bruna., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polylactic acid 3D interconnected nanonetworks as high reflectance distributed Bragg reflectors

  • Resende, Pedro M.
  • Martín-González, Marisol
Natural systems found ways to exploit light at the nanoscale, devising complex 3D structures that behave as photonic crystals, able to produce structural coloration. Distributed Bragg reflectors are a particular example of 1D photonic crystals, used in different applications, including structural coloration. Currently distributed Bragg reflectors rely on multi-material deposition or material doping to achieve high refractive index contrast, unlike the biological counterparts that often rely on single-materials through structural variations. In this work, we report single-material polymeric distributed Bragg reflectors fabricated from the infiltration of polylactic acid into 3D anodic aluminium oxide templates. These templates act as sacrificial scaffolds for the nanostructuration of the polymeric material, generating a 3D polymer network with periodic modulations. The obtained structures present very high reflectance, above 95%, with a low number of periods around 20 repeating layers. These structures offer a new approach to the generation of flexible single-material DBRs with high reflectance, an important issue in all-polymer photonic systems., M. S. M. G wants to acknowledge the MINECO project PID2020- 118430GB-100 for financial support. The authors acknowledge also the service from the MiNa Laboratory at IMN, and funding CM (project SpaceTec, S2013/ICE2822), MINECO (Project CSIC13-4E-1794), and EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Shedding Light on the Mid-Infrared Complex Refractive Index of Anodic Aluminum Oxide

  • Díaz-Lobo, Alba
  • Castro-Fernández, Irene
  • Blanco, Eduardo
  • Ramos Vega, Daniel
  • Martín-González, Marisol
  • Manzano, Cristina V.
In the current scientific landscape, the understanding of optical properties in the mid-infrared (mid-IR) range (3–30 µm) is crucial in simulations and models to explore the potential of materials for various applications. However, due to the challenges associated with mid-IR characterization, accurate refractive index (n) and extinction coefficient (κ) data are often lacking in the literature. This study addresses this gap by investigating the mid-IR n and κ spectra of anodic aluminum oxide (AAO) nanostructures anodized under different conditions, using two distinct approaches: IR ellipsometry and a theoretical model based on multilayer reflection and effective medium. The results demonstrate a strong agreement: the anodizing conditions have a significant influence on the optical properties of the AAO nanostructures. These differences enable accurate simulations of the emissivity spectra of AAO nanostructures on Al foils, which align closely with experimental measurements. This theoretical approximation is versatile and extensible to a broad range of materials. Different materials are tested, namely, a sapphire, a polycarbonate film, and a polyethylene terephthalate (PET) film achieving a useful qualitative description. This study paves the way for a novel approach in the engineering of new micro and nano-optical materials, facilitating their evaluation for suitability in mid-IR applications., C.V.M. acknowledges financial support from “Atracción de Talento Investigador” de la Comunidad de Madrid, contract 2019-T1/IND-13541. The authors acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project SpaceTec, S2013/ICE2822), MINECO (project CSIC13-4E-1794), and EU (FEDER, FSE). This study was partially supported by the Spanish Ministry of Science under project OMNIPATH (reference PID2020-119587RB-I00. I.C. acknowledges the funded by Formación de Profesorado Universitario (FPU) grant from the Spanish Ministry of Universities, reference FPU21/03180. M.M.G. acknowledged the Ministerio de Ciencia e Innovación with the Merge Project (PID2020118430GB-I00). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tetrahedral DNA nanostructures, graphene and carbon nanodots-based electrochemiluminescent biosensor for BRCA1 gene mutation detection

  • García-Fernández, Daniel
  • Gutiérrez-Gálvez, Laura
  • López-Diego, David
  • Luna, Mónica
  • Torres, Íñigo
  • Zamora, Félix
  • Solera, Jesús
  • García-Mendiola, Tania
  • Lorenzo, Encarnación
In this study, we present a novel electrochemiluminescent DNA biosensor designed for detecting breast cancer type 1 (BRCA1) gene mutations. The biosensor integrates graphene nanosheets (Graph-NS), tetrahedral DNA nanostructures (TDNs), and carbon nanodots (CNDs) to enhance sensitivity and specificity. Graph-NS are employed to structure the transducer and serve as a platform for DNA immobilization. TDNs are engineered with a BRCA1 gene-specific capture probe located at the apex (TDN-BRCA1), facilitating efficient biorecognition. Additionally, the basal vertices of TDNs are functionalized with amino groups, enabling their attachment to the CSPE/Graph-NS surface via amino-graphene interaction. This platform effectively identifies single-base mutations in the BRCA1 gene utilizing synthesized CNDs as a coreactant and [Ru(bpy)3]2+ as the luminophore through the coreactant pathway. The developed biosensor demonstrates exceptional sensitivity and can detect a single mutation in the BRCA1 gene. Furthermore, it has been successfully validated in real samples obtained from breast cancer patients, showcasing a remarkable detection limit of 1.41 aM., The Spanish Ministry of Economy and Competitiveness has financially supported this work (PID2020-116728RB-I00, PID2023-150844OB-I00, RED2022-134120-T and TED2021-129738B–I00). Spanish Ministry of Universities supported Laura Gutiérrez-Gálvez with a FPU (FPU19/06309). European Union, through Autonomous Community of Madrid supported Daniel García-Fernández with a Programa Investigo grant in from the Plan de Recuperación, Transformación y Resiliencia– NextGenerationEU (09-PIN1-00013.4/2022-Puesto 83). The authors acknowledge the support of the EU and Horizon 2020 through Instruct Proposal PID: 21859, and the CRIOMECORR project (ESFRI-2019-01-CSIC-16) to the cryoEM CNB-CSIC facility. The authors also appreciate the service from the MiNa Laboratory at IMN, and funding from EU (FEDER, FSE), MINECO (project CSIC13-4E-1794) and CM (project S2018/NMT-4291 TEC2SPACE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

J-PLUS: The fraction of calcium white dwarfs along the cooling sequence

  • López-Sanjuan, Carlos
  • Carrasco, J. M.
  • Rebassa-Mansergas, Alberto
  • Jiménez-Esteban, Francisco M.
The catalog with the parameters of the analyzed white dwarfs is available both on the jplus.WhiteDwarf table at J-PLUS database and at the CDS via anonymous ftp to cdsarc.cds.unistra.fr (130.79.128.5) or via https://cdsarc.cds.unistra.fr/viz-bin/cat/J/A+A/691/A211., This work has made use of data from the European Space Agency (ESA) mission Gaia (https://www. cosmos.esa.int/gaia), processed by the Gaia Data Processing and Anal ysis Consortium (DPAC, https://www.cosmos.esa.int/web/gaia/dpac/ consortium)., López-Sanjuan, Carlos et al., [Aims] We used the Javalambre Photometric Local Universe Survey (J-PLUS) second data release (DR2) photometry in 12 optical bands over 2176 deg2 to estimate the fraction of white dwarfs with the presence of Ca II H+K absorption along the cooling sequence., [Methods] We compared the J-PLUS photometry against metal-free theoretical models to estimate the equivalent width in the J0395 passband of 10 nm centered at 395 nm (EWJ0395), a proxy to detect calcium absorption. A total of 4399 white dwarfs with effective temperatures within 30 000 > Teff > 5500 K and masses of M > 0.45 M⊙ were analyzed. Their EWJ0395 distribution was modeled using two populations, corresponding to polluted and non-polluted systems, to estimate the fraction of calcium white dwarfs (fCa) as a function of Teff. The probability of each individual white dwarf presenting calcium absorption, pCa, was also computed., [Results] The comparison of EWJ0395 with both the measured Ca/He abundance and the identification of metal pollution from spectroscopy shows that EWJ0395 correlates with the presence of Ca II H+K absorption. The fraction of calcium white dwarfs changes along the cooling sequence, increasing from fCa ≈ 0 at Teff = 13 500 K to fCa ≈ 0.15 at Teff = 5500 K. This trend reflects the selection function of calcium white dwarfs in the optical. We compare our results with the fractions derived from the 40 pc spectroscopic sample and from Sloan Digital Sky Survey (SDSS) spectra. The trend found in J-PLUS observations is also present in the 40 pc sample; however, SDSS shows a deficit of metal-polluted objects at Teff < 12 000 K. Finally, we found 39 white dwarfs with pCa > 0.99. Twenty of them have spectra presented in previous studies, whereas we obtained follow-up spectroscopic observations for six additional targets. These 26 objects were all confirmed as metal-polluted systems., [Conclusions] The J-PLUS optical data provide a robust statistical measurement for the presence of Ca II H+K absorption in white dwarfs. We find a 15 ± 3% increase in the fraction of calcium white dwarfs from Teff = 13 500 K to 5500 K, which reflects their selection function in the optical from the total population of metal-polluted systems., OSIRIS was funded by GRANTECAN and the National Plan of Astronomy and Astrophysics of the Spanish Government. Funding for the J-PLUS Project has been provided by the Governments of Spain and Aragón through the Fondo de Inversiones de Teruel; the Aragonese Government through the Research Groups E96, E103, E16_17R, E16_20R, and E16_23R; the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033 y FEDER, Una manera de hacer Europa) with grants PID2021-124918NB-C41, PID2021-124918NB-C42, PID2021-124918NA-C43, and PID2021-124918NB-C44; the Spanish Ministry of Science, Innovation and Universities (MCIU/AEI/FEDER, UE) with grants PGC2018-097585-B-C21 and PGC2018-097585-B-C22; the Spanish Ministry of Economy and Competitiveness (MINECO) under AYA2015-66211-C2-1-P, AYA2015-66211-C2-2, AYA2012-30789, and ICTS-2009-14; and European FEDER funding (FCDD10-4E-867, FCDD13-4E-2685). The Brazilian agencies FINEP, FAPESP, and the National Observatory of Brazil have also contributed to this project. P.-E. T. and M. W. O. have received funding from the European Research Council under the European Union’s Horizon 2020 research and innovation programme number 101002408 (MOS100PC). The work by J.M. Carrasco was (partially) supported by the Spanish MICIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” by the “European Union” through grant PID2021-122842OB-C21, and the Institute of Cosmos Sciences University of Barcelona (ICCUB, Unidad de Excelencia 'María de Maeztu') through grant CEX2019-000918-M. A. E., A. d. P., H. D. S., and J. A. F. O. acknowledge the financial support from the Spanish Ministry of Science and Innovation and the European Union - NextGenerationEU through the Recovery and Resilience Facility project ICTS-MRR-2021-03-CEFCA. F. J. E acknowledge financial support from MCIN/AEI/10.13039/501100011033 through grant PID2020-112949GB-I00. A. R. M. acknowledges support by the Spanish MINECO grant PID2020-117252GB-I00 and by the AGAUR/Generalitat de Catalunya grant SGR-386/2021. J. V. acknowledges the technical members of the UPAD for their invaluable work: Juan Castillo, Javier Hernandez, Ángel López, Alberto Moreno, David Muniesa, and Hector Vives. This work has made use of data from the European Space Agency (ESA) mission Gaia (https://www.cosmos.esa.int/gaia), processed by the Gaia Data Processing and Analysis Consortium (DPAC, https://www.cosmos.esa.int/web/gaia/dpac/consortium). Funding for the DPAC has been provided by national institutions, in particular the institutions participating in the Gaia Multilateral Agreement. Funding for SDSS-III has been provided by the Alfred P. Sloan Foundation, the Participating Institutions, the National Science Foundation, and the U.S. Department of Energy Office of Science., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2019-000918-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Espectrometría de masas nanomecánica de alta eficiencia para la caracterización de poblaciones bacterianas

  • Sanz Jiménez, Adrián
Trabajo presentado para lograr el título de Doctor por la Universidad Autónoma de Madrid, Departamentos de Física de la Materia Condensada y Física Teórica de la Materia Condensada, Facultad de Ciencias, Programa de Doctorado en Física de la Materia Condensada, Nanociencia y Biofísica, Este trabajo ha sido apoyado por el programa de investigación e innovación de la Unión Europea Horizon 2020 a través del proyecto ViruScan (731868-VIRUSCAN-FETPROACT) y mediante el proyecto de investigación VIROMECH (PDC2022- 133944-100), financiado por MCIN/AEI/10.13039/501100011033 y Unión Europea “NextGeneration EU”/PRTR. Así mismo, este trabajo ha contado con el apoyo del laboratorio X-SEM del IMN, el cual está financiado por la Comunidad de Madrid (Proyecto S2018/NMT-4291 TEC2SPACE) y por el MINECO (Proyecto CSIC13-4E-1794 con apoyo de FEDER, FSE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advancing diagnostics with BODIPY-bismuthene DNA biosensors

  • Gutiérrez-Gálvez, Laura
  • Enebral-Romero, Estefanía
  • Valle Amores, Miguel Ángel
  • Pina Coronado, Clara
  • Torres, Iñigo
  • López-Diego, David
  • Luna, Mónica
  • Fraile, Alberto
  • Zamora, Félix
  • Alemán, José
  • Álvarez, Jesús
  • Capitán, M. J.
  • Lorenzo, Encarnación
  • García-Mendiola, Tania
In this work, an electrochemical biosensor is prepared based on few-layer bismuthene hexagons (FLBHs) and a water-soluble BODIPY (BDP) derivative (BDP-NaSO3) for early infection diagnosis. In particular, the detection in advance of a virus sequence in nasopharyngeal swab samples was developed. The combination of the FLBHs and BDP-NaSO3 facilitates the direct, sensitive, and specific detection of gene viruses without the need for any prior amplification step. This work demonstrates that the FLBHs provide an improved electrochemical platform for immobilizing thiolated DNA capture probes that increase the sensitivity of the biosensor, while BDP-NaSO3 serves as a newly powerful electrochemical indicator of the hybridization event. As a proof of concept, SARS-CoV-2 was selected as the model virus. The developed biosensor demonstrated selective, rapid, and straightforward detection of the specific sequence RNA-dependent RNA-polymerase (RdRp) of SARS-CoV-2 with a detection limit of 4.97 fM and a linear range from 16.6 fM to 100 fM. Furthermore, this platform successfully detects the virus directly in nasopharyngeal swab samples with a viral load of at least 19 Cts without being subjected to any prior amplification stage. Finally, the high stability of the biosensor response, which has been working under ambient conditions for over one month, the selectivity and rapidity for specific virus detection, and the requirement of low-volume samples for the determination are remarkable characteristics that make it ideal for its potential application in clinical diagnosis in point-of-care settings., This work was financially supported by the Spanish Ministry of Economy and Competitiveness (PID2020-116728RB-I00, RED2022-134120-T, PID2023-150844OB-I00, PID2022- 138908NB-C31, and PID2021-122299NB-I00), the Community of Madrid (REACT-UE NANOCOV-CM and Y2020/NMT6469), the Spanish Ministry of Science, Innovation and Universities (TED2021-129738B-I00, TED2021-130470B-I00, and TED2021- 129999B-C32) and the “María de Maeztu” Programme for Units of Excellence in R&D, CEX2023-001316-M. Laura Gutiérrez-Gálvez gratefully acknowledges the financial support of a Formación del Profesorado Universitario (FPU) grant from the Spanish Ministry of Universities (FPU19/06309). Estefanía Enebral-Romero received financial support from the “Nanotecnología para detección del SARS-CoV-2 y sus variantes, NANOCOV” project and a contract as a pre-doctoral researcher funded by a grant CEX2020-001039-S, supported by MCIN/AEI/10.13039/501100011033. We also acknowledge María U. González and Raquel Alvaro for their help with fluorescence microscopy and EDAX mapping, respectively, and the services of the MiNa Laboratory at IMN and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and the EU (FEDER, FSE). We also acknowledge the “Servicio de Microbiología, Hospital Universitario Ramón y Cajal and Instituto Ramón y Cajal de Investigación Sanitaria (IRYCIS)” for providing the clinical samples. We acknowledge the support from the “(MAD2D-CM)-UAM” project funded by Comunidad de Madrid by the Recovery, Transformation and Resilience Plan and by NextGenerationEU from the European Union., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

MoS₂-DNA tetrahedral bioconjugate for high-performance DNA biosensors: application in viral infection diagnostics

  • Enebral-Romero, Estefanía
  • Martínez-Periñán, Emiliano
  • López-Diego, David
  • Luna, Mónica
  • Garrido, Marina
  • Navío, Cristina
  • Pérez, Emilio M.
  • Lorenzo, Encarnación
  • García-Mendiola, Tania
An electrochemical DNA biosensor is presented for early viral infection detection, integrating molybdenum disulphide (MoS₂), tetrahedral DNA nanostructures (TDNs), and thionine-modified carbon nanodots (CNDsTy). The innovation of this work lies in the first-time integration of these nanomaterials for the preparation of a bioconjugate, whose synergy enables the biosensor's functionality. MoS₂ anchors the TDNs, which carry the capture probe for virus identification via genetic code recognition. CNDsTy allow the electrochemical detection based on their different affinity for single-stranded (ssDNA) and double-stranded DNA (dsDNA), enabling hybridization event identification. The biosensor achieves high sensitivity (detection limit of 5.00 fM) and can distinguish viral loads, validated with the SARS-CoV-2 ORF1ab sequence in human nasopharyngeal samples., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. The research leading to these results received funding from Spanish Ministry of Economy and Competitiveness (PID2020-116728RB-I00, RED2022-134120-T, and PID2023-150844OB-I00), Community of Madrid (REACT-UE NANOCOV-CM, (MAD2D-CM)-IMDEA and S2018/NMT-4291 TEC2SPACE), Spanish Ministry of Science, Innovation and Universities (TED2021-129738B-I00, PID2020-116661RB-I00, and CEX2020-001039-S), the Recovery, Transformation and Resilience Plan, the European Union (NextGenerationEU and FEDER, FSE), and by MINECO (CSIC13-4E-1794)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

∼5-Fold enhancement in the thermoelectric figure of merit of sustainable 3D-CuNi interconnected nanonetworks due to ultralow lattice thermal conductivity

  • Manzano, Cristina V.
  • Caballero-Calero, Olga
  • Casari, Daniele
  • Sharma, Amit
  • Díaz-Lobo, Alba
  • Maeder, Xavier
  • Martín-González, Marisol
The pursuit of efficient thermoelectric materials, particularly those composed of low-toxicity and Earth-abundant elements, has intensified in recent years. This study introduces an approach to increase the thermoelectric properties of CuNi alloys through the synergistic application of two nanostructuring techniques: the incorporation of saccharine into the electrolyte to achieve a crystallite size reduction to 23-26 nm and the utilization of three-dimensional (3D) anodic aluminum oxide (3D-AAO) templates to fabricate nanowire networks. For comparison purposes, we successfully electrodeposited CuNi films, one-dimensional (1D) nanowire arrays, and modulated nanowire arrays, together with 3D-nanonetworks, maintaining a consistent composition of Cu0.60Ni0.40 across all samples. Notably, while the electrical conductivity and Seebeck coefficient remained consistent between the nanocrystalline CuNi films and the 3D-nanonetworks, a significant reduction in thermal conductivity was observed, decreasing from 29 W m-1 K-1 for the bulk material to 10.9 ± 1.1 W m-1 K-1 for nanocrystalline films, to 5.3 ± 0.5 W m-1 K-1 for the 3D nanonetworks, and to 4.9 ± 0.6 W m-1 K-1 for free-standing 3D CuNi nanonetworks. This reduction is attributed to enhanced phonon scattering within the 3D architecture together with the nanocrystalline size inside the nanowires. The figure of merit (zT) exhibited an impressive increase of more than four times (4.4) for 3D-CuNi nanonetworks within AAO templates and 4.8 times for free-standing 3D-CuNi nanonetworks, when compared to bulk. Our findings underscore the potential of dual nanostructuring strategies to optimize the thermoelectric performance of environmentally friendly, stable, and abundant materials like CuNi, paving the way for advancements in sustainable energy technologies., The authors would like to acknowledge financial support from MINECO under grant number PID2020-118430GB-100. C. V. M. acknowledges financial support from “Atracción de Talento Investigador” de la Comunidad de Madrid, contract 2019-T1/IND-13541. We acknowledge the service from the MiNa Laboratory at IMN and funding from CM (project SpaceTec, S2013/ICE2822), MINECO (project CSIC13-4E-1794), and EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetoelastic anisotropy drives localized magnetization reversal in 3D nanowire networks

  • Vivas, Laura G.
  • Ruiz-Clavijo, Alejandra
  • Caballero-Calero, Olga
  • Navas, David
  • Ordoñez-Cencerrado, Amanda A.
  • Manzano, Cristina V.
  • Sanz González, Ruy
  • Martín-González, Marisol
Three-dimensional magnetic nanowire networks (3DNNs) have shown promise for applications beyond those of their linear counterparts. However, understanding the underlying magnetization reversal mechanisms has been limited. In this study, we present a combined experimental and computational investigation on simplified 3DNNs to address this gap. Our findings reveal a previously unidentified in-plane magnetoelastic anisotropy, validated through comparisons between experimental and simulated magnetic data. Notably, we discovered that magnetization reversal in 3DNNs is driven by highly localized magnetic states, arising from the interplay of exchange and dipolar interactions, magnetoelastic anisotropy, and nanowire microstructure. This discovery challenges the prevailing understanding of magnetization reversal in nickel nanowires. Our work provides critical insights into the magnetic behavior of 3DNNs, opening doors for their tailored design and optimization., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Postdoctoral Fellowship (MIDAS) grant agreement no. 101107507. R. S. acknowledges financial support from grant PID2020-115325GB-C31 funded by MCIN/ AEI/10.13039/501100011033. D. N. acknowledges the financial support from the project CNS2022-135949 funded by the Spanish Ministry of Science and Innovation, MCIN/10.13039/ 501100011033, and by “ESF Investing in your future”. We acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project SpaceTec, S2013/ICE2822), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI). We acknowledge Nadia Pastor Jimenez for technical support. We thank Xavier Maeder from EMPA for conducting transmission electron backscattered diffraction on Ni nanowires shown in the ESI, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Magnetoelastic anisotropy drives localized magnetization reversal in 3D nanowire networks. Nanoscale [Dataset]

  • Vivas, Laura G.
  • Ruiz-Clavijo, Alejandra
  • Caballero-Calero, Olga
  • Navas, David
  • Ordoñez-Cencerrado, Amanda A.
  • Manzano, Cristina V.
  • Sanz, Ruy
  • Martín-González, Marisol
According to the open access nature and its exceptions in the datasets regulation of the Call HORIZON-MSCA-2022-PF-01, and having reflected the following statements in the Data Management Plan of such project (ID: 101107507; MIDAS; MSCA Postdoctoral Fellowship), the authors of the data associated with this publication state the following: The datasets associated with this publication will be available upon request, due to these datasets being subjected to Intellectual Property Restrictions; requests by externals for the use of these datasets will be approved by the principal investigators of the project Laura G. Vivas and Marisol Martin. Please, contact Dr. Laura G. Vivas and Prof. Martín-Gonzalez: laura.g.vivas@csic.es and marisol.martin@csic.es This modus operandi will remain in effect, at least until the end of the project., Three-dimensional magnetic nanowire networks (3DNNs) have shown promise for applications beyond those of their linear counterparts. However, understanding the underlying magnetization reversal mechanisms has been limited. This Dataset refers to the following study in which we present a combined experimental and computational investigation on simplified 3DNNs to address this gap. Our findings reveal a previously unidentified in-plane magnetoelastic anisotropy, validated through comparisons between experimental and simulated magnetic data. Notably, we discovered that magnetization reversal in 3DNNs is driven by highly localized magnetic states, arising from the interplay of exchange and dipolar interactions, magnetoelastic anisotropy, and nanowire microstructure. This discovery challenges the prevailing understanding of magnetization reversal in nickel nanowires. Our work provides critical insights into the magnetic behavior of 3DNNs, opening doors for their tailored design and optimization, This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Postdoctoral Fellowship (MIDAS) grant agreement no. 101107507. R. S. acknowledges financial support from grant PID2020-115325GB-C31 funded by MCIN/AEI/10.13039/501100011033. D. N. acknowledges the financial support from the project CNS2022-135949 funded by the Spanish Ministry of Science and Innovation, MCIN/10.13039/501100011033, and by “ESF Investing in your future”. We acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project SpaceTec, S2013/ICE2822), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI). We acknowledge Nadia Pastor Jimenez for technical support. We thank Xavier Maeder from EMPA for conducting transmission electron backscattered diffraction on Ni nanowires shown in the ESI., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring plasmonic hotspots of Au tilted nanocolumns and their application to the uracil detection by surface-enhanced Raman scattering

  • Barbillon, Grégory
  • Faure, Mathilde
  • Douillard, Ludovic
  • Caudron, Eric
  • Humbert, Christophe
  • García-Martín, José Miguel
In this work, an investigation on plasmonic hotspots of Au tilted nanocolumns and their application to the uracil detection by surface-enhanced Raman scattering (SERS) is addressed. These Au tilted nanocolumns are fabricated by employing a low-cost and easy-to-implement fabrication technique, which is the glancing angle deposition with magnetron sputtering. Moreover, these Au nanocolumns can generate a great density of highly confined electric field zones, called hotspots, located in the nanogaps between the nearest nanocolumns. The photoemission electron microscopy is employed to obtain the statistics on the distribution of these plasmonic hotspots with a high accuracy (spatial resolution of 10–20 nm) in the spectral range from 680 nm to 1080 nm. Thus, the SERS intensity can be correlated with the density and the intensity distribution of these plasmonic hotspots. Finally, the plasmonic hotspots of the Au nanocolumns are used to assess the limit of detection (LOD) of the uracil molecule by SERS. This LOD is determined at 6 nM demonstrating the good sensitivity of our Au nanocolumns compared to the existing literature., José Miguel García-Martín thanks grant PID2021-126524NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, and also acknowledges the service from the MiNa Laboratory at IMN, funded from CM (project SpaceTec, S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794), and EU (FEDER, FSE) ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The miniJPAS and J-NEP surveys: Machine learning for star-galaxy separation

  • Jeakel, Ana Paula
  • Vieira dos Santos, Gabriel
  • Marra, Valerio
  • Marttens, Rodrigo von
  • Gurung-López, Siddhartha
  • Abramo, Raul
  • Alcaniz, Jailson
  • Benítez, Narciso
  • Bonoli, Silvia
  • Cenarro, A. J.
  • Cristóbal-Hornillos, David
  • Daflon, S.
  • Dupke, Renato A.
  • Ederoclite, Alessandro
  • González Delgado, Rosa M.
  • Hernán-Caballero, Antonio
  • Hernández-Monteagudo, Carlos
  • Liu, Jifeng
  • López-Sanjuan, Carlos
  • Marín-Franch, Antonio
  • Mendes de Oliveira, Claudia
  • Moles, Mariano
  • Roig, Fernando
  • Sodré Jr., L.
  • Taylor, Keith
  • Varela, Jesús
  • Vázquez Ramió, H.
  • Vílchez Medina, José Manuel
  • Willmer, Christopher
  • Zaragoza-Cardiel, Javier
We present a supervised machine learning classification of sources from the Javalambre Physics of the Accelerating Universe Astrophysical Survey (J-PAS) Pathfinder datasets: miniJPAS and J-NEP. Leveraging crossmatches with spectroscopic and photometric catalogs, we construct a robust labeled dataset comprising 14,594 sources classified into extended (galaxies) and point-like (stars and quasars) objects. We assess dataset representativeness using UMAP analysis, confirming broad and consistent coverage of feature space. An XGBoost classifier, with hyperparameters tuned using automated optimization, is trained using purely photometric data (60-band J-PAS magnitudes) and combined photometric and morphological features, with performance thoroughly evaluated via ROC and purity–completeness metrics. Incorporating morphology significantly improves classification, outperforming the baseline classifications available in the catalogs. Permutation importance analysis reveals morphological parameters, particularly concentration, normalized peak surface brightness, and PSF, alongside photometric features around 4000 and 6900 Å, as crucial for accurate classifications. We release a value-added catalog with our models for star-galaxy classification, enhancing the utility of miniJPAS and J-NEP for subsequent cosmological and astrophysical analyses., A.P.J. acknowledges financial support from CAPES (Brazil). G.V.d.S. acknowledges financial support from UFES (Brazil). V.M. acknowledges partial support from CNPq (Brazil) and FAPES (Brazil). R.v.M. is suported by Fundação de Amparo à Pesquisa do Estado da Bahia (FAPESB) grant TO APP0039/2023. S.G.-L. acknowledge the financial support from the MICIU with funding from the European Union NextGenerationEU and Generalitat Valenciana in the call Programa de Planes Complementarios de I+D+i (PRTR 2022) Project (VAL-JPAS), reference ASFAE/2022/025. SGL also acknowledge the research Project PID2023-149420NB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU and the project of excellence PROMETEO CIPROM/2023/21 of the Conselleria de Educación, Universidades y Empleo (Generalitat Valenciana). RGD acknowledges financial support from the Severo Ochoa grant CEX2021-001131-S, funded by MICIU/AEI (10.13039/501100011033), and is also grateful for support from project PID2022-141755NB-I00., Funding for the J-PAS Project has been provided by the Governments of Spain and Aragón through the Fondo de Inversiones de Teruel; the Aragonese Government through the Research Groups E96, E103, E16_17R, E16_20R, and E16_23R; the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033 y FEDER, Una manera de hacer Europa) with grants PID2021-124918NB-C41, PID2021-124918NB-C42, PID2021-124918NA-C43, and PID2021-124918NB-C44; the Spanish Ministry of Science, Innovation and Universities (MCIU/AEI/FEDER, UE) with grants PGC2018-097585-B-C21 and PGC2018-097585-B-C22; the Spanish Ministry of Economy and Competitiveness (MINECO) under AYA2015-66211-C2-1-P, AYA2015-66211-C2-2, and AYA2012-30789; and European FEDER funding (FCDD10-4E-867, FCDD13-4E-2685). The Brazilian agencies FINEP, FAPESP, FAPERJ and the National Observatory of Brazil have also contributed to this project. Additional funding was provided by the Tartu Observatory and by the J-PAS Chinese Astronomical Consortium., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001131-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Emission of fine and ultrafine nanoparticle aerosols from composites functionalized with Multi-Wall Carbon Nano Tubes (MWCNTs) subjected to sliding wear: the influence of matrix material

  • Husanu, Francisca
  • Vélez Molina, Juan Camilo
  • Carlos Cornelio, Jesús Antonio
  • Santa Marín, Juan Felipe
  • Toro, Alejandro
  • Castellote, Marta
  • Nevshupa, Roman
While multi-wall carbon nanotube (MWCNT)-reinforced nanocomposites offer improved wear resistance, the health implications of released nanoparticle aerosols are a concern. This research aimed to understand the influence of matrix material on the tribological properties, microstructure, and triboemission of MWCNT-functionalized polymer and cement composites. Key findings reveal that aerosol emission cannot be predicted solely based on porosity and mechanical properties. The observed variations in MWCNT effects across different matrix materials are attributed to the distinct dominant wear mechanisms in each., This work was supported by Spanish National Research Council (Nos. COOPB20363, COOPA20495, and COOPB24043), Ministry of Science, Innovation and Universities of Spain (Nos. PID2019-111063RB-I00 and TED2021-129950B-I00) and the National Council of Science and Technology of Mexico - CONACYT (No. 740521). The authors acknowledge the FESEM service from the MiNa Laboratory at IMN funded by Madrid’s Community Government (No. S2013/ICE2822), Ministry of Science, Innovation and Universities of Spain (No. CSIC13-4E-1794) and EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advancing All-Day Passive Radiative Cooling Performance of 3D Anodized Aluminum Oxide Nanostructures on Aluminium

  • Díaz-Lobo, Alba
  • Martín-González, Marisol
  • Manzano, Cristina V.
Passive radiative cooling, which uses the cold sink of outer space for sub-ambient cooling, offers a sustainable alternative to energy-intensive conventional cooling methods. This study investigates the impact of transversal channel distances within three dimensional- 3D- anodic aluminum oxide (AAO) dielectric and inorganic nanostructures on their morphology, emissivity, and passive radiative cooling performance. 3D-AAO nanostructures with varying alumina thicknesses and transverse channel spacings are fabricated. 3D-AAO metamaterials on Aluminium - Al- bulk with larger transverse channel distances exhibit high solar reflectance and high mid-IR emissivity, since they act as Bragg reflectors. Their porosity is significantly higher than the more common 1D-AAO due to the periodically ordered transverse channels. Cooling power density calculations showed that greater transverse channel distances improve daytime cooling performance. Outdoor characterization under direct sunlight confirmed these findings, with a 3D-AAO nanostructure on Al bulk achieving a maximum temperature reduction of 10.2 °C. This research establishes the critical role of transverse nanochannels in tailoring the radiative cooling properties of durable, inorganic, all-dielectric 3D-AAO nanostructures and highlights their potential for multiple applications, including energy-efficient building cooling., The authors would like to acknowledge financial support from the “Atracción de Talento Investigador” de la Comunidad de Madrid, contract 2019-T1/IND-13541. The authors acknowledged the service from the MiNa Laboratory at IMN, and funding from CM (project SpaceTec, S2013/ICE2822),MINECO (project CSIC13-4E-1794), and EU (FEDER, FSE). The authorsalso acknowledged support of the publication fee by the CSIC Open AccessPublication Support Initiative through its Unit of Information Resourcesfor Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mid-infrared optical valve based on VO2

  • García-Martín, Antonio
  • Álvaro Bruna, Raquel
  • Fang, Zhuoqun
  • Zimmers, Alexandre
  • Chen, Zhuoying
  • Aigouy, Lionel
We demonstrate an efficient optical binary-switch effect in nanoslit arrays achieved via the temperature-induced phase transition of VO2. Experimental measurements reveal a polarization-dependent 60% reduction in reflectivity during the insulator-to-metal transition. Tuning a single parameter of the slit enables control over the "optical-valve"effect. Full numerical simulations support these findings, predicting a reflectivity reduction up to 90%. The nearly one-to-null transition in reflectivity mimics the operation of a digital switch, with the high-reflectivity and the low-reflectivity states providing a binary response much like digital electronics., The authors are deeply indebted to Prof. G. Armelles, for sharing with us his latest efforts in research, performing the FTIR measurements, the ellipsometry analysis of VO2, and discussing the results. A.G.-M. acknowledges financial support from Grants No. BICPLAN6G (TED2021-131417B-I00) and No. LIGHTCOMPAS (PID2022-137569NB-C41), funded by Grant No. MCIN/AEI/10.13039/501100011033, “ERDF A way of making Europe.” A.G.-M. and R.A. acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (Project No. S2018/NMT-4291 TEC2SPACE), MINECO (Project No. CSIC13-4E-1794), and EU (FEDER, FSE). Z.F. acknowledges the Chinese Scholarship Council (CSC) for the Ph.D. thesis grant. All authors acknowledge Paris Sciences & Lettres (PSL) and ESPCI for the Invited Professor Grant attributed to A.G.-M., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unveiling the small-scale web around galaxies with miniJPAS and DESI

  • Galárraga-Espinosa, Daniela
  • González Delgado, Rosa M.
  • Cenarro, Javier
  • Ederoclite, Alessandro
  • Hernán-Caballero, Antonio
  • López-Sanjuan, Carlos
  • Marín-Franch, Antonio
  • Vázquez Ramió, Héctor
Full list of authors: Galárraga-Espinosa, Daniela; Kauffmann, Guinevere; Bonoli, Silvia; Lucie-Smith, Luisa; González Delgado, Rosa M.; Tempel, Elmo; Abramo, Raul; Gurung-López, Siddharta; Marra, Valerio; Alcaniz, Jailson; Benitez, Narciso; Carneiro, Saulo; Cenarro, Javier; Cristóbal-Hornillos, David; Dupke, Renato; Ederoclite, Alessandro; Hernán-Caballero, Antonio; Hernández-Monteagudo, Carlos; López-Sanjuan, Carlos; Marín-Franch, Antonio; Mendes de Oliveira, Claudia; Moles, Mariano; Sodré, Laerte, Jr.; Taylor, Keith; Varela, Jesús; Vázquez Ramió, Hector, We present the first statistical observational study detecting filaments in the immediate surroundings of galaxies, i.e. The local web of galaxies. Simulations predict that cold gas, the fuel for star formation, is channeled through filamentary structures into galaxies. Yet, direct observational evidence for this process has been limited by the challenge of mapping the cosmic web at small scales. Using miniJPAS spectro-photometric data combined with spectroscopic DESI redshifts when available, we constructed a high-density observational galaxy sample spanning 0.2 < z < 0.8. Local filaments are detected within a 3 Mpc physical radius of each galaxy with stellar mass M∗ > 1010 M⊙ using all nearby galaxies as tracers, combined with a probabilistic adaptation of the DisPerSE algorithm designed to overcome limitations due to photometric redshift uncertainties. Our methodology was tested and validated using mock catalogues built with random forest models applied to a simulated lightcone. Besides recovering the expected increase in galaxy connectivity (defined as the number of filaments attached to a galaxy) with stellar mass, we show that our connectivity measurements agree with 3D reference estimates from the mock galaxies. Thanks to these filament reconstructions, we explore the relation between small-scale connectivity and galaxy star formation rate, finding a mild positive trend which needs to be confirmed by follow-up studies with larger sample sizes. We propose galaxy connectivity to local filaments as a powerful and physically motivated metric of environment, offering new insights into the role of cosmic structure in galaxy evolution. © The Authors 2026., We thank the anonymous referee for providing useful comments and suggestions that improved the paper. DGE thanks Khee-Gan Lee, and Mohammadreza Ayromlou for helpful discussions, and Clotilde Laigle for the useful and very thorough comments on the draft leading to the final version of the paper. SB acknowledge support from the Spanish Ministerio de Ciencia e Innovación through project PID2021-124243NB-C21. LLS acknowledges sup- port by the Deutsche Forschungsgemeinschaft (DFG, German Research Foun- dation) under Germany’s Excellence Strategy – EXC 2121 ’Quantum Universe’ – 390833306. RGD acknowledges financial support from the Severo Ochoa grant CEX2021-001131-S, funded by MICIU/AEI (10.13039/501100011033), and is also grateful for support from project PID2022-141755NB-I00. ET was funded by the HTM (grant TK202), ETAg (grant PRG1006) and the EU Hori- zon Europe (EXCOSM, grant No. 101159513). SGL acknowledges the financial support from the MICIU with funding from the European Union NextGenera- tionEU and Generalitat Valenciana in the call Programa de Planes Complemen- tarios de I+D+i (PRTR 2022) Project (VAL-JPAS), reference ASFAE/2022/025. VM thanks CNPq (Brazil) and FAPES (Brazil) for partial financial support. This work is part of the research Project PID2023-149420NB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU. This work is also supported by the project of excellence PROMETEO CIPROM/2023/21 of the Conselleria de Educación, Cultura, Universidades y Empleo (Generali- tat Valenciana). This work is based on observations made with the JST250 telescope and PathFinder camera for the miniJPAS project at the Observato- rio Astrofísico de Javalambre (OAJ), in Teruel, owned, managed, and oper- ated by the Centro de Estudios de Física del Cosmos de Aragón (CEFCA). We acknowledge the OAJ Data Processing and Archiving Unit (UPAD; Cristobal-Hornillos et al. 2012) for reducing and calibrating the OAJ data used in this work. Funding for the J-PAS Project has been provided by the Governments of Spain and Aragón through the Fondo de Inversiones de Teruel; the Aragonese Government through the Research Groups E96, E103, E16_17R, E16_20R, and E16_23R; the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033 y FEDER, Una manera de hacer Europa) with grants PID2021-124918NB-C41, PID2021-124918NB-C42, PID2021-124918NA-C43, and PID2021-124918NB-C44; the Spanish Ministry of Science, Innovation and Universities (MCIU/AEI/FEDER, UE) with grants PGC2018-097585-B-C21 and PGC2018-097585-B-C22; the Spanish Ministry of Economy and Competitiveness (MINECO) under AYA2015-66211-C2-1-P, AYA2015-66211-C2-2, and AYA2012-30789; and European FEDER funding (FCDD10-4E-867, FCDD13-4E-2685). The Brazilian agencies FINEP, FAPESP, FAPERJ and the National Observatory of Brazil have also contributed to this project. Additional funding was provided by the Tartu Observatory and by the J-PAS Chinese Astronomical Consortium. Author contributions: DGE: con- ceptualization; formal analysis; investigation; methodology; data curation; soft- ware; validation; visualization; writing – original draft, review & editing. GK: conceptualization; methodology; validation; writing – review & editing. SB: con- ceptualization; methodology; validation. LLS: methodology; writing – review & editing. RGD: resources; data curation; writing - review & editing. ET: method- ology; writing – review & editing. RA: resources; writing – review & editing. SGL: writing – review & editing. VM, JA, NB, SC, JC, DCH, RD, AE, AHC, CHM, CLS, AMF, CMO, MM, LS, KT, JV, HVR: resources., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001131-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

J-HERTz: J-PLUS Heritage Exploration of Radio Targets at z<5

  • Fernández Gil, D.
  • Fernández-Ontiveros, J. A.
  • López-Sanjuan, Carlos
  • Arizo-Borillo, F.
  • Pino, Andrés del
  • Hernán-Caballero, Antonio
  • Lumbreras-Calle, A.
  • Rahna, P. T.
  • Sobral, David
  • Vázquez Ramió, H.
  • Cenarro, A. J.
  • Marín-Franch, Antonio
  • Angulo, R.E.
  • Ederoclite, A.
  • Cristóbal-Hornillos, David
  • Dupke, R. A.
  • Hernández-Monteagudo, Carlos
  • Moles, Mariano
  • Sodré, L., Jr.
  • Varela, Jesús
We introduce J-HERTZ (J-PLUS Heritage Exploration of Radio Targets at z < 5), a new multiwavelength catalog that combines optical narrowband photometry from J-PLUS, infrared observations from the Wide-field Infrared Survey Explorer, and deep low-frequency radio data from LoTSS for nearly 0.5 million sources across 2100 deg2 of the northern sky. Key innovations of J-HERTZ include Bayesian neural network classifications for 390,000 galaxies, 31,000 quasars, and 20,000 stars, along with significantly improved photometric redshifts for 235,000 galaxies compared to previous J-PLUS DR3 and LoTSS DR2 estimates. We identify 831 candidate Galactic radio stars, which, if confirmed, would constitute a significant addition to the number of radio-emitting stars identified to date. Among radio-loud galaxies with spectroscopic observations, ≳20% lack Seyfert or LINER signatures, indicating a substantial population of optically quiescent radio galaxies, in agreement with previous works. Spectral energy distribution fitting of their host galaxies using J-PLUS photospectra reveals systematically low specific star formation rates, consistent with quenched stellar populations. J-HERTZ thus provides a powerful data set to exploit radio-optical synergies, enabling studies that span from the origin of stellar radio emission to the active galactic nucleus life cycle and the role of jet activity in shaping host galaxy evolution. © 2026. The Author(s)., We thank the anonymous referee for their constructive comments and suggestions, which helped improve the quality of this manuscript. D.F.G. acknowledges financial support by the Predoctoral Gobierno de Aragón fellowship 2023–2027. D.F.G., J.A.F.O., F.A.B., A.H.C., and A.L.C. acknowledge financial support by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033), by “ERDF A way of making Europe” and by “European Union NextGenerationEU/PRTR” through the grants PID2021- 124918NB-C44 and CNS2023-145339. J.A.F.O. acknowl- edges MCIN and the European Union—NextGenerationEU through the Recovery and Resilience Facility project ICTS- MRR-2021-03-CEFCA. A.d.P. acknowledges financial sup- port from the Severo Ochoa grant CEX2021-001131-S funded by MCIN/AEI/ 10.13039/501100011033. R.P.T. acknowl- edges the European Union - NextGenerationEU through the Recovery and Resilience Facility program (RRF) Planes Complementarios con las CCAA de Astrofísica y Física de Altas Energías - LA4. Based on observations made with the JAST80 telescope and T80Cam camera for the J-PLUS project at the Observatorio Astrofísico de Javalambre (OAJ), in Teruel, owned, managed, and operated by the Centro de Estudios de Física del Cosmos de Aragón (CEFCA). We acknowledge the OAJ Data Processing and Archiving Unit (UPAD. Cristobal-Hornillos et al. 2012) for reducing the OAJ data used in this work. Funding for the J-PLUS Project has been provided by the Governments of Spain and Aragón through the Fondo de Inversiones de Teruel; the Aragonese Government through the Research Groups E96, E103, E16_17R, E16_20R, and E16_23R; the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/ 501100011033 y FEDER, Una manera de hacer Europa) with grants PID2021-124918NB-C41, PID2021-124918NB-C42, PID2021-124918NA-C43, and PID2021-124918NB-C44; the Spanish Ministry of Science, Innovation and Universities (MCIU/AEI/FEDER, UE) with grants PGC2018-097585-B- C21 and PGC2018-097585-B-C22; the Spanish Ministry of Economy and Competitiveness (MINECO) under AYA2015- 66211-C2-1-P, AYA2015-66211-C2-2, AYA2012-30789, and ICTS-2009-14; and European FEDER funding (FCDD10-4E- 867, FCDD13-4E-2685). The Brazilian agencies FINEP, FAPESP, and the National Observatory of Brazil have also contributed to this project. LOFAR is the Low Frequency Array, designed and constructed by ASTRON. It has observing, data processing, and data storage facilities in several countries, which are owned by various parties (each with their own funding sources), and which are collectively operated by the ILT foundation under a joint scientific policy. The ILT resources have benefited from the following recent major funding sources: CNRS-INSU, Observatoire de Paris and Université d’Orléans, France; BMBF, MIWF-NRW, MPG, Germany; Science Foundation Ireland (SFI), Depart- ment of Business, Enterprise and Innovation (DBEI), Ireland; NWO, The Netherlands; The Science and Technology Facilities Council, UK; Ministry of Science and Higher Education, Poland; and The Istituto Nazionale di Astrofisica (INAF), Italy. This publication makes use of data products from the Wide-field Infrared Survey Explorer, which is a joint project of the University of California, Los Angeles, and the Jet Propulsion Laboratory/California Institute of Technology, and NEOWISE, which is a project of the Jet Propulsion Laboratory/California Institute of Technology. WISE and NEOWISE are funded by the National Aeronautics and Space Administration., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001131-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Generalized Automated Framework for Thermal Characterization: From Bulk Materials to Complex Heterostructures

  • Tenaguillo Arrese, Miguel Ángel
  • Pérez Picazo, Elena
  • Caballero-Calero, Olga
  • Manzano, Cristina V.
  • Martín-González, Marisol
Precise determination of thermal conductivity in multilayer structures remains a critical challenge for advancing thermoelectric technologies. Conventional techniques often struggle with surface roughness or require complex preparation, hindering the characterization of electrodeposited materials. To address this gap, a fully automated, MATLAB-based computational framework operationalizing the generalized photoacoustic theory for a robust inverse analysis is presented. The methodology is rigorously benchmarked against Bi2Te3/3D anodic aluminum oxide (3D-AAO) reference nanocomposites, reproducing established literature values with high fidelity. Subsequently, the capability of this framework is demonstrated through the characterization of electrodeposited copper selenide (CuxSe) films. Results reveal a systematic dependence of thermal conductivity on copper stoichiometry, offering insights into anharmonicity-driven phonon scattering mechanisms. Comprehensive sensitivity analyses confirm that the photoacoustic signal is predominantly dominated by the film's thermal conductivity. Thus, this work delivers an accessible, validated tool for in situ characterization of structurally non-ideal films, accelerating next-generation energy material development., The authors acknowledge financial support from “ERC Advanced Grant No. 101052603, PowerbyU”. We acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project SpaceTec, S2013/ICE2822), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

A Generalized Automated Framework for Thermal Characterization: From Bulk Materials to Complex Heterostructures [Dataset]

  • Tenaguillo Arrese, Miguel Ángel
  • Pérez Picazo, Elena
  • Caballero-Calero, Olga
  • Manzano, Cristina V.
  • Martín-González, Marisol
Precise determination of thermal conductivity in multilayer structures remains a critical challenge for advancing thermoelectric technologies. Conventional techniques often struggle with surface roughness or require complex preparation, hindering the characterization of electrodeposited materials. To address this gap, a fully automated, MATLAB-based computational framework operationalizing the generalized photoacoustic theory for a robust inverse analysis is presented. The methodology is rigorously benchmarked against Bi2Te3/3D anodic aluminum oxide (3D-AAO) reference nanocomposites, reproducing established literature values with high fidelity. Subsequently, the capability of this framework is demonstrated through the characterization of electrodeposited copper selenide (CuxSe) films. Results reveal a systematic dependence of thermal conductivity on copper stoichiometry, offering insights into anharmonicity-driven phonon scattering mechanisms. Comprehensive sensitivity analyses confirm that the photoacoustic signal is predominantly dominated by the film's thermal conductivity. Thus, this work delivers an accessible, validated tool for in situ characterization of structurally non-ideal films, accelerating next-generation energy material development., The authors acknowledge financial support from “ERC Advanced Grant No. 101052603, PowerbyU”. We acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project SpaceTec, S2013/ICE2822), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Analysis of twinning mechanisms of Mg–RE alloys using in situ synchrotron radiation diffraction and high-resolution digital image correlation

  • Garcés, Gerardo
  • Orozco-Caballero, A.
  • Medina, Judit
  • Pérez Zubiaur, Pablo
  • Stark, Andreas
  • Schell, Norbert
  • Adeva, Paloma
In situ synchrotron diffraction combined with high-resolution digital image correlation (HRDIC) were used to analyse the activation and spatial propagation of different twinning modes during compression deformation in an extruded Mg-6%Gd(wt%) alloy. Gadolinium atoms are in solid solution in the as-extruded state. Initially, the deformation process is controlled by the activation of tensile {101̅2}< 101̅1 > twinning (TTW). The volume fraction of TTWs evolves rapidly due to the twins transfer throughout neighbour grains and basal slip-assisted twin nucleation, as evidenced by HRDIC from the early development of localized deformation bands. TTW mode induces the rotation of the lattice with respect to the initial magnesium orientation and, therefore, a progressive increase in the intensity of the {0002} diffraction peak with increasing the strain in the axial direction, that reaches a maximum at around 6% of compression strain that also coincides with the maximum of the work-hardening curve. Above this strain, the compression (CTW) and double twinning (DTW) modes are also activated. This fact reduces the {0002} intensity along AD and increases the intensity of the {0002} diffraction peak in a direction between 15º to 45º from axial direction. The activation of non-basal dislocation-mediated slip modes within twins relaxes the localized stress concentration that DTWs generate. Therefore, gadolinium in solid solution enhances compressive plasticity in Mg alloys through the cooperative interaction between twinning and non-basal dislocation slip., This work was financially supported by the Spanish Ministry of Science, Innovation and Universities under project number TED2021–131235B-I00. The authors acknowledge the Deutsches Elektronen-Synchrotron (DESY) for providing beamtime at the P07 beamline of the PETRA III synchrotron facility. We would like to acknowledge support of the Electron Microscopy Laboratory at National Center for Metallurgical Research (CSIC) and National Center of Electron Microscopy (UCM) for access to their facilities and expert assistance. We acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project S2018/NMT−4291 TEC2SPACE), MINECO (project CSIC13–4E−1794) and EU (FEDER, FSE).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Rapid colorimetric detection of wound infection with a fluidic paper device

  • Hoyo, Javier
  • Bassegoda Puigdomenech, Arnau
  • Ferreres Cabanes, Guillem|||0000-0003-3138-8506
  • Hinojosa Caballero, Dolores
  • Gutierrez Capitan, Manuel
  • Baldi Coll, Antonio
  • Fernandez Sanchez, Cesar
  • Tzanov, Tzanko|||0000-0002-8568-1110
Current procedures for the assessment of chronic wound infection are time-consuming and require complex instruments and trained personnel. The incidence of chronic wounds worldwide, and the associated economic burden, urge for simple and cheap point-of-care testing (PoCT) devices for fast on-site diagnosis to enable appropriate early treatment. The enzyme myeloperoxidase (MPO), whose activity in infected wounds is about ten times higher than in non-infected wounds, appears to be a suitable biomarker for wound infection diagnosis. Herein, we develop a single-component foldable paper-based device for the detection of MPO in wound fluids. The analyte detection is achieved in two steps: (i) selective immunocapture of MPO, and (ii) reaction of a specific dye with the captured MPO, yielding a purple color with increasing intensity as a function of the MPO activity in infected wounds in the range of 20–85 U/mL. Ex vivo experiments with wound fluids validated the analytic efficiency of the paper-based device, and the results strongly correlate with a spectrophotometric assay., Peer Reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The Use of Fluoroproline in MUC1 Antigen Enables Efficient Detection of Antibodies in Patients with Prostate Cancer

  • Somovilla, V.J.
  • Bermejo, I.A.
  • Albuquerque, I.S.
  • Martínez-Sáez, N.
  • Castro-López, J.
  • García-Martín, F.
  • Compañón, I.
  • Hinou, H.
  • Nishimura, S.-I.
  • Jiménez-Barbero, J.
  • Asensio, J.L.
  • Avenoza, A.
  • Busto, J.H.
  • Hurtado-Guerrero, R.
  • Peregrina, J.M.
  • Bernardes, G.J.L.
  • Corzana, F.
A structure-based design of a new generation of tumor-associated glycopeptides with improved affinity against two anti-MUC1 antibodies is described. These unique antigens feature a fluorinated proline residue, such as a (4S)-4-fluoro-l-proline or 4, 4-difluoro-l-proline, at the most immunogenic domain. Binding assays using biolayer interferometry reveal 3-fold to 10-fold affinity improvement with respect to the natural (glyco)peptides. According to X-ray crystallography and MD simulations, the fluorinated residues stabilize the antigen-antibody complex by enhancing key CH/p interactions. Interestingly, a notable improvement in detection of cancer-associated anti-MUC1 antibodies from serum of patients with prostate cancer is achieved with the non-natural antigens, which proves that these derivatives can be considered better diagnostic tools than the natural antigen for prostate cancer.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Extensive gene content variation in the Brachypodium distachyon pan-genome correlates with population structure

  • Gordon, S.P.
  • Contreras-Moreira, B.
  • Woods, D.P.
  • Des Marais, D.L.
  • Burgess, D.
  • Shu, S.
  • Stritt, C.
  • Roulin, A.C.
  • Schackwitz, W.
  • Tyler, L.
  • Martin, J.
  • Lipzen, A.
  • Dochy, N.
  • Phillips, J.
  • Barry, K.
  • Geuten, K.
  • Budak, H.
  • Juenger, T.E.
  • Amasino, R.
  • Caicedo, A.L.
  • Goodstein, D.
  • Davidson, P.
  • Mur, L.A.J.
  • Figueroa, M.
  • Freeling, M.
  • Catalan, P.
  • Vogel, J.P.
While prokaryotic pan-genomes have been shown to contain many more genes than any individual organism, the prevalence and functional significance of differentially present genes in eukaryotes remains poorly understood. Whole-genome de novo assembly and annotation of 54 lines of the grass Brachypodium distachyon yield a pan-genome containing nearly twice the number of genes found in any individual genome. Genes present in all lines are enriched for essential biological functions, while genes present in only some lines are enriched for conditionally beneficial functions (e.g., defense and development), display faster evolutionary rates, lie closer to transposable elements and are less likely to be syntenic with orthologous genes in other grasses. Our data suggest that differentially present genes contribute substantially to phenotypic variation within a eukaryote species, these genes have a major influence in population genetics, and transposable elements play a key role in pan-genome evolution.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

MEBS, a software platform to evaluate large (meta)genomic collections according to their metabolic machinery: Unraveling the sulfur cycle

  • De Anda, V.
  • Zapata-Peñasco, I.
  • Poot-Hernandez, A.C.
  • Eguiarte, L.E.
  • Contreras-Moreira, B.
  • Souza, V.
The increasing number of metagenomic and genomic sequences has dramatically improved our understanding of microbial diversity, yet our ability to infer metabolic capabilities in such datasets remains challenging. We describe the Multigenomic Entropy Based Score pipeline (MEBS), a software platform designed to evaluate, compare, and infer complex metabolic pathways in large "omic" datasets, including entire biogeochemical cycles. MEBS is open source and available through https://github.com/eead-csic-compbio/metagenome Pfam score. To demonstrate its use, we modeled the sulfur cycle by exhaustively curating the molecular and ecological elements involved (compounds, genes, metabolic pathways, and microbial taxa). This information was reduced to a collection of 112 characteristic Pfam protein domains and a list of complete-sequenced sulfur genomes. Using the mathematical framework of relative entropy (H''), we quantitatively measured the enrichment of these domains among sulfur genomes. The entropy of each domain was used both to build up a final score that indicates whether a (meta)genomic sample contains the metabolic machinery of interest and to propose marker domains in metagenomic sequences such as DsrC (PF04358). MEBS was benchmarked with a dataset of 2107 non-redundant microbial genomes from RefSeq and 935 metagenomes from MG-RAST. Its performance, reproducibility, and robustness were evaluated using several approaches, including random sampling, linear regression models, receiver operator characteristic plots, and the area under the curve metric (AUC). Our results support the broad applicability of this algorithm to accurately classify (AUC = 0.985) hard-to-culture genomes (e.g., Candidatus Desulforudis audaxviator), previously characterized ones, and metagenomic environments such as hydrothermal vents, or deep-sea sediment. Our benchmark indicates that an entropy-based score can capture the metabolic machinery of interest and can be used to efficiently classify large genomic and metagenomic datasets, including uncultivated/unexplored taxa.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Design of alpha-S-Neoglycopeptides derived from MUC1 with a flexible and solvent-exposed sugar moiety

  • Rojas-Ocáriz, Víctor
  • Compañón, Ismael
  • Aydillo, Carlos
  • Castro-López, Jorge
  • Jiménez-Barbero, Jesús
  • Hurtado-Guerrero, Ramón
  • Avenoza, Alberto
  • Zurbano, María M.
  • Peregrina, Jesús M.
  • Busto, Jesús H.
  • Corzana, Francisco
The use of vaccines based on MUC1 glycopeptides is a promising approach to treat cancer. We present herein several sulfa-Tn antigens incorporated in MUC1 sequences that possess a variable linker between the carbohydrate (GalNAc) and the peptide backbone. The main conformations of these molecules in solution have been evaluated by combining NMR experiments and molecular dynamics simulations. The linker plays a key role in the modulation of the conformation of these compounds at different levels, blocking a direct contact between the sugar moiety and the backbone, promoting a helix-like conformation for the glycosylated residue and favoring the proper presentation of the sugar unit for molecular recognition events. The feasibility of these novel compounds as mimics of MUC1 antigens has been validated by the X-ray diffraction structure of one of these unnatural derivatives complexed to an anti-MUC1 monoclonal antibody. These features, together with potential lack of immune suppression, render these unnatural glycopeptides promising candidates for designing alternative therapeutic vaccines against cancer.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Comparative plastome genomics and phylogenomics of Brachypodium: flowering time signatures, introgression and recombination in recently diverged ecotypes

  • Sancho, R.
  • Cantalapiedra, C.P.
  • López-Alvarez, D.
  • Gordon, S.P.
  • Vogel, J.P.
  • Catalán, P.
  • Contreras-Moreira, B.
Few pan-genomic studies have been conducted in plants, and none of them have focused on the intraspecific diversity and evolution of their plastid genomes. We address this issue in Brachypodium distachyon and its close relatives B. stacei and B. hybridum, for which a large genomic data set has been compiled. We analyze inter- and intraspecific plastid comparative genomics and phylogenomic relationships within a family-wide framework. Major indel differences were detected between Brachypodium plastomes. Within B. distachyon, we detected two main lineages, a mostly Extremely Delayed Flowering (EDF+) clade and a mostly Spanish (S+) – Turkish (T+) clade, plus nine chloroplast capture and two plastid DNA (ptDNA) introgression and micro-recombination events. Early Oligocene (30.9 million yr ago (Ma)) and Late Miocene (10.1 Ma) divergence times were inferred for the respective stem and crown nodes of Brachypodium and a very recent Mid-Pleistocene (0.9 Ma) time for the B. distachyon split. Flowering time variation is a main factor driving rapid intraspecific divergence in B. distachyon, although it is counterbalanced by repeated introgression between previously isolated lineages. Swapping of plastomes between the three different genomic groups, EDF+, T+, S+, probably resulted from random backcrossing followed by stabilization through selection pressure.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Mycobacterium tuberculosis complex exhibits lineage-specific variations affecting protein ductility and epitope recognition

  • Yruela, Inmaculada
  • Contreras-Moreira, Bruno
  • Magalhães, Carlos
  • Osório, Nuno S.
  • Gonzalo-Asensio, Jesús
This work was supported by Gobierno de Aragón (DGA-GC B18 and B25), the Spanish Ministry of Science and Competitiveness (BIO2014-52580P, CSIC13-4E-2490), Instituto de Salud Carlos III (PI12/01970) and the European Commission Horizon 2020 (H2020-PHC-643381). Some of these grants were partially financed by the EU FEDER Program. This work was also supported by Fundação para a Ciência e Tecnologia, Portugal (IF/00474/2014) and cofunded by Programa Operacional Regional do Norte (ON.2—O Novo Norte), Quadro de Referência Estratégico Nacional (QREN), through the Fundo Europeu de Desenvolvimento Regional (FEDER).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Improved Flexibility and Economics of Combined Cycles by Power to Gas

  • Bailera, Manuel
  • Peña, Begoña
  • Lisbona, Pilar
  • Romeo, Luis M.
Massive penetration of renewable energy in the energy systems is required to comply with existing CO2 regulations. Considering current power pools, large shares of renewable energy sources imply strong efficiency and economic penalties in fossil fuel power plants as they are mainly operated to regulate the system and constant shutdowns are expected. Under this framework, the integration of a combined cycle power plant (CCPP) with an energy storage technology such as power to gas (PtG) is proposed to virtually reduce its minimum complaint load through the diversion of instantaneous excess electricity. Power to gas produces hydrogen through water electrolysis, which is later combined with CO2 to produce methane. The main novelty of this study relies in the improved flexibility and economics of combined cycles by means of using power to gas as a tool to reduce the minimum complaint load. The principal objective of the study is the quantification of cost reduction under different scenarios of shutdowns and conventional start-ups. The case study analyses a combined cycle of 400 MWe gross power with a minimum complaint load of 30% that can be virtually reduced to 20% by means of a 40- MWe power-to-gas plant. Eight scenarios are defined to compare the reference case of conventional operation under hot, warm, and cold start-ups with power-to-gas-assisted operation. Additionally, PtG-assisted operation scenarios are analyzed with different loads (30–50–70%). These scenarios also include the consideration of a temporary peak of demand occurring in a period in which dispatch is below the minimum complaint load. Under this situation, the response time of conventional plants is very limited, while PtG-assisted CCPP can rapidly satisfy the peak. The techno-economic model quantifies the required fuel, gross and net power, and emissions as well as total costs and incomes under each scenario and net differential profit in an hourly basis. The analysis of the obtained results does not recommend the operation of the PtG-assisted CCPP at minimum complaint load for hot, warm, or cold start-ups. However, important marginal profits are achieved with the proposed system for part-loads operation over 50% for every sort of start-up, avoiding shutdowns and extending the capacity factor.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Methodology for dimensioning the socio-economic impact of power-to-gas technologies in a circular economy scenario

  • Llera, E.
  • Romeo, L.M.
  • Scarpellini, S.
  • Portillo, P.
Innovative and sustainable energy technologies are needed in the transition of energy toward a circular economy. Because of the use of renewable energy and carbon utilization, power-to-gas could be a cutting-edge technology that supports the circular model in future sustainable energy markets. However, this technology faces new technical and socio-economic challenges. The use of power-to-gas is limited because of barriers that limit the mobilization of investment capital. In addition, social and economic impacts on the territories in which these facilities are located are under study. In this context, the aims of this paper are: (i) To explore the determinants and barriers for power-to-gas technology to enhance the understanding of investment in innovative energy technologies; and (ii) to support effective policymaking and energy companies’ decision-making processes. This study defines and measures, from a circular economy perspective, the main impacts of the deployment of this technology on a territory in terms of volume of investment, employment generation, and CO2 capture. The study also provides a simplified methodology to contribute to the analysis of the use of power-to-gas. Finally, it improves the knowledge of the socio-economic impact of this cutting-edge technology for the transition of energy to a zero-emission scenario.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A review on CO2 mitigation in the Iron and Steel industry through Power to X processes

  • Bailera, Manuel
  • Lisbona, Pilar
  • Peña, Begoña
  • Romeo, Luis M.
In this paper we present the first systematic review of Power to X processes applied to the iron and steel industry. These processes convert renewable electricity into valuable chemicals through an electrolysis stage that produces the final product or a necessary intermediate. We have classified them in five categories (Power to Iron, Power to Hydrogen, Power to Syngas, Power to Methane and Power to Methanol) to compare the results of the different studies published so far, gathering specific energy consumption, electrolysis power capacity, CO2 emissions, and technology readiness level. We also present, for the first time, novel concepts that integrate oxy-fuel ironmaking and Power to Gas. Lastly, we round the review off with a summary of the most important research projects on the topic, including relevant data on the largest pilot facilities (2–6 MW).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Radon Mitigation Applications at the Laboratorio Subterraneo de Canfranc (LSC)

  • Perez-Perez, Javier
  • Amare, Julio Cesar
  • Bandac, Iulian Catalin
  • Bayo, Alberto
  • Borjabad-Sanchez, Silvia
  • Calvo-Mozota, Jose Maria
  • Cid-Barrio, Laura
  • Hernandez-Antolin, Rebecca
  • Hernandez-Molinero, Beatriz
  • Novella, Pau
  • Pelczar, Krzysztof
  • Pena-Garay, Carlos
  • Romeo, Beatriz
  • Ortiz de Solorzano, Alfonso
  • Sorel, Michel
  • Torrent, Jordi
  • Uson, Alberto
  • Wojna-Pelczar, Anna
  • Zuzel, Grzegorz
The Laboratorio Subterraneo de Canfranc (LSC) is the Spanish national hub for low radioactivity techniques and the associated scientific and technological applications. The concentration of the airborne radon is a major component of the radioactive budget in the neighborhood of the detectors. The LSC hosts a Radon Abatement System, which delivers a radon suppressed air with 1.1 & PLUSMN;0.2 mBq/m(3) of Rn-222. The radon content in the air is continuously monitored with an Electrostatic Radon Monitor. Measurements with the double beta decay demonstrators NEXT-NEW and CROSS and the gamma HPGe detectors show the important reduction of the radioactive background due to the purified air in the vicinity of the detectors. We also discuss the use of this facility in the LSC current program which includes NEXT-100, low background biology experiments and radiopure copper electroformation equipment placed in the radon-free clean room.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Improved photoenergy properties of low-emissivity coatings deposited by sputtering with an ion gun treatment

  • Carretero, E.
  • Cueva, A.
  • Preciado-Garbayo, J.
  • Sevillano, P.
This work studies the effect of ion treatment on low-emissivity (low-e) coatings deposited by magnetron sputtering. Specifically, we have investigated the application of an ion treatment in the dielectric layer before deposition of a layer of silver. This reduces layer roughness which means the silver layer can be deposited with enhanced characteristics. We have also evaluated the etching rate on the SnOx layer due to the ion treatment on already deposit coatings of equal thicknesses. Subsequently, we studied the effects on the coating's photoenergy properties. For equivalent coatings, we found that those treated with ions were more transparent in the visible region, more reflective, and had a lower emissivity, which are essential requirements for low-e coatings applied in architectural glass.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Comunicando buenas prácticas territoriales en la Unión Europea

  • Angulo Egea, María
  • Hernández Navarro, María Luz
Esta investigación presenta los resultados de un proyecto de innovación que se basa en en el trabajo interdisciplinar entre los estudiantes de dos titulaciones que se imparten en la Universidad de Zaragoza, en los grados de Geografía y Ordenación del Territorio (Políticas y estrategias territoriales de la Unión Europea) y de Periodismo (Proyectos de comunicación especializada).Es una práctica colaborativa que aplica la metodología basada en proyectos para analizar y difundir buenas prácticas territoriales en la UE relacionadas con los Objetivos del Desarrollo Sostenible 2030. Supone reforzar la competencia de trabajo en equipo, compartir la experiencia de profesionales en ejercicio y ensayar la práctica profesional. This article presents the results of an innovation project based on an interdisciplinary work between students of two degrees taught at the University of Zaragoza: the Degree in Geography and Spatial Planning (Territorial Policies and Strategies of the European Union) and the Degree in Journalism (Specialized Communication Projects). This collaborative practice applies the project-based methodology to analyze and disseminate good territorial practices in the EU related to the Sustainable Development Goals 2030. It involves reinforcing teamwork skills, sharing the experience of practicing professionals and testing professional practiceAbstract in English.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Effect of a Ketogenic medium chain Triglyceride-enriched diet on the fecal microbiota in canine idiopathic epilepsy: a pilot study

  • García-Belenguer, Sylvia
  • Grasa, Laura
  • Palacio, Jorge
  • Moral, Jon
  • Rosado, Belén
Ketogenic diets have been successfully used in people and dogs with idiopathic epilepsy. This study examined the effect of a ketogenic medium chain triglycerides (MCT)- enriched diet administered for one month on the fecal microbiota of epileptic (n = 11) (six with drug-sensitive epilepsy, DSE; five with drug-refractory epilepsy, DRE) and non-epileptic beagle dogs (n = 12). A significant reduction after diet in the relative abundance of bacteria from the Actinobacteria phylum was observed in all dogs. Epileptic dogs showed a higher relative abundance of Lactobacillus compared with non-epileptic dogs at baseline but these differences disappeared after diet. Epileptic dogs also showed a significantly higher abundance of Negativicutes and Selenomonadales after dietary intervention. Baseline microbiota patterns were similar in non-epileptic beagles and dogs with DSE but significantly different from dogs with DRE. In non-epileptic and DSE groups, the MCT diet decreased the relative abundance of Firmicutes and increased that of Bacteroidetes and Fusobacteria, but the opposite effect was observed in dogs with DRE. These results suggest that the MCT diet effect would depend on individual baseline microbiota patterns and that ketogenic diets could help reduce gut microbiota differences between dogs with DRE and DSE.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Analysis of plasma-derived exosomal microRNAs as potential biomarkers for canine idiopathic epilepsy

  • García-Gracia, Mireya
  • Moreno-Martinez, Laura
  • Hernaiz, Adelaida
  • Usón, Sebastián
  • Moral, Jon
  • Sanz-Rubio, David
  • Zaragoza, Pilar
  • Palacio, Jorge
  • Rosado, Belén
  • Osta, Rosario
  • García-Belenguer, Sylvia
  • Martín Burriel, Inmaculada
Epilepsy is one of the most prevalent complex neurological diseases in both the canine and human species, with the idiopathic form as its most common diagnosis. MicroRNAs (miRNAs) are small, noncoding RNA molecules that play a role in gene regulation processes and appear to be a promising biological target for convulsion control. These molecules have been reported as constituents of the internal content of exosomes, which are small extracellular vesicles released by cells. In this study, exosome samples were isolated from the plasma of 23 dogs, including 9 dogs with epilepsy responsive to treatment, 6 dogs with drug-resistant epilepsy, and 8 control dogs. Plasma exosomes were then characterized by electron transmission microscopy, nanoparticle tracking analysis, and dot blotting. Afterwards, the microRNA-enriched RNA content of exosomes was isolated, and miRNA quantification was performed by quantitative real-time PCR. Seven circulating miRNAs that have been previously described in the literature as potential diagnostic or prognostic biomarkers for epilepsy were evaluated. We observed significant differences in miR-16 (p < 0.001), miR-93-5p (p < 0.001), miR-142 (p < 0.001), miR-574 (p < 0.01), and miR-27 (p < 0.05) levels in dogs with refractory epilepsy compared to the control group. In drug-sensitive epileptic dogs, miR-142 (p < 0.01) showed significant differences compared to healthy dogs. Moreover, distinct levels of miR-16 (p < 0.05), miR-93-5p (p < 0.01), miR-132 (p < 0.05), and miR-574 (p < 0.05) were also found between drug-sensitive and drug-resistant epileptic dogs. Our results present plasma-circulating exosomes as an advantageous source of epileptic biomarkers, highlighting the potential of miRNAs as prognostic and diagnostic biomarkers of canine idiopathic epilepsy.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Study of the optimal deposition conditions of Ag(O2) and Ag(N2) seed layers on ultrathin silver transparent conductive films

  • Cueva, Ana
  • Carretero, Enrique
In this study, ultrathin Ag layers were analyzed for their use as conductive films, which were fabricated via magnetron sputtering on a glass substrate and protected with aluminum-doped zinc oxide (AZO). These layers were obtained using seed layers made of silver deposited by adding small amounts of oxygen or nitrogen prior to the deposition of the metallic silver layer. This study aimed to determine the optimal amount of gas needed to maximize the conductivity and transparency properties of the conductive films with varied silver thicknesses. The optimal characteristics of the studied samples were verified using spectrophotometric, sheet resistance measurements, and surface morphology techniques. It was concluded that a smaller amount of silver required a higher amount of gas to be introduced into the seed layer. Besides, to fabricate an optimal conductive film, it is necessary to deposit 5.9 or 5.2 nm of silver with a seed layer obtained with a O2 partial pressure of 1.7 × 10−4 mbar, or 5.2 or 4.7 nm of silver with a seed layer obtained using a N2 partial pressure of 4.2 × 10−4 mbar. These samples provide sheet resistance values between 13.0 Ω/sq and 17.6 Ω/sq and transmission between 86.2 % and 87.3 % at 550 nm.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Effect of Lactobacillus supplementation on seizure control, gut microbiota, and blood neurotransmitters in dogs with idiopathic epilepsy

  • García-Belenguer, Sylvia
  • Rosado, Belén
  • Hernaiz, Adelaida
  • Moral, Jon
  • Martín-Burriel, Inmaculada
  • Palacio, Jorge
Idiopathic epilepsy is one of the most common neurological diseases in dogs; however, epileptogenesis and the mechanisms underlying drug resistance remain poorly understood. This study aimed to evaluate the effects of three months of supplementation with canine-derived Lactobacillaceae strains on seizure frequency in dogs with drug-sensitive epilepsy (DSE) and drug-refractory epilepsy (DRE). Additionally, gut microbiota profiles and plasma levels of GABA, L-glutamate, and serotonin were analysed and compared to those of healthy control dogs. The probiotic supplementation was associated with a reduction in both the number of seizures and seizure days in epileptic dogs. An increase in the relative abundance of gut Lactobacillus and plasma GABA levels did not accompany clinical improvement. However, it was associated with a significant decrease in the GABA/L-Glutamate ratio in dogs with DSE but not in those with DRE. At baseline, heterogeneity of the fecal microbial community (β-diversity) was higher in epileptic compared to controls. Following probiotic supplementation, the differences in β-diversity between control and DSE dogs were no longer observed. The probiotic had no notable effect on the control group but was associated with a significant reduction in β-diversity in dogs with DRE. While the relative abundance of Lactobacillus remained unchanged after probiotic administration, some changes in gut microbiota were observed in epileptic dogs. Numerous associations were identified between seizure frequency and specific bacterial taxa with potential protective effects (e.g.,Prevotella_9, Ligilactobacillus) or risk effects (e.g.,Parasutterella, Helicobacter). These findings suggest that long-term use of Lactobacillus may serve as a promising adjuvant strategy for seizure control.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Rapid colorimetric detection of wound infection with a fluidic paper device

  • Hoyo, Javier
  • Bassegoda Puigdomenech, Arnau
  • Ferreres Cabanes, Guillem
  • Hinojosa Caballero, Dolores
  • Gutierrez Capitan, Manuel
  • Baldi Coll, Antonio
  • Fernandez Sanchez, Cesar
  • Tzanov, Tzanko
Current procedures for the assessment of chronic wound infection are time-consuming and require complex instruments and trained personnel. The incidence of chronic wounds worldwide, and the associated economic burden, urge for simple and cheap point-of-care testing (PoCT) devices for fast on-site diagnosis to enable appropriate early treatment. The enzyme myeloperoxidase (MPO), whose activity in infected wounds is about ten times higher than in non-infected wounds, appears to be a suitable biomarker for wound infection diagnosis. Herein, we develop a single-component foldable paper-based device for the detection of MPO in wound fluids. The analyte detection is achieved in two steps: (i) selective immunocapture of MPO, and (ii) reaction of a specific dye with the captured MPO, yielding a purple color with increasing intensity as a function of the MPO activity in infected wounds in the range of 20–85 U/mL. Ex vivo experiments with wound fluids validated the analytic efficiency of the paper-based device, and the results strongly correlate with a spectrophotometric assay., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

J-PLUS: The javalambre photometric local universe survey

  • Cenarro Lagunas, Andrés Javier
  • Moles Villamate, Mariano
  • Cristóbal Hornillos, David
  • Rebassa Mansergas, Alberto
The Javalambre-Photometric Local Universe Survey (J-PLUS ) is an ongoing 12-band photometric optical survey, observing thousands of square degrees of the Northern hemisphere from the dedicated JAST/T80 telescope at the Observatorio Astrofísico de Javalambre (OAJ). T80Cam is a 2 deg2 field-of-view camera mounted on this 83 cm-diameter telescope, and is equipped with a unique system of filters spanning the entire optical range (3 500–10 000 Å). This filter system is a combination of broad, medium and narrow-band filters, optimally designed to extract the rest-frame spectral features (the 3 700–4 000 Å Balmer break region, Hd, Ca H+K, the G-band, the Mgb and Ca triplets) that are key to both characterize stellar types and to deliver a low-resolution photospectrum for each pixel of the sky observed. With a typical depth of AB ~ 21.25 mag per band, this filter set thus allows for an indiscriminate and accurate characterization of the stellar population in our Galaxy, it provides an unprecedented 2D photo-spectral information for all resolved galaxies in the local universe, as well as accurate photo-z estimates (at the ¿ z ~ 0.01–0.03 precision level) for moderately bright (up to r ~ 20 mag) extragalactic sources. While some narrow band filters are designed for the study of particular emission features ([OII]/¿3727, Ha/¿6563) up to z < 0.015, they also provide well-defined windows for the analysis of other emission lines at higher redshifts. As a result, J-PLUS has the potential to contribute to a wide range of fields in Astrophysics, both in the nearby universe (Milky Way structure, globular clusters, 2D IFU-like studies, stellar populations of nearby and moderate redshift galaxies, clusters of galaxies) and at high redshifts (emission line galaxies at z ˜ 0.77, 2.2 and 4.4, quasi stellar objects, etc). With this paper, we release ~36 deg2 of J-PLUS data, containing about 1.5 × 105 stars and 105 galaxies at r < 21 mag. These numbers are expected to rise to about 35 million of stars and 24 million of galaxies by the end of the survey, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Dynamic Combinatorial Optimization of In Vitro and In Vivo Heparin Antidotes

  • Carbajo López, Daniel
  • Guerra-Rebollo, Marta
  • Bujons, Jordi
  • Alfonso, Ignacio
  • Prats, Eva
Heparin-like macromolecules are widely used in clinics as anticoagulant, antiviral, and anticancer drugs. However, the search of heparin antidotes based on small synthetic molecules to control blood coagulation still remains a challenging task due to the physicochemical properties of this anionic polysaccharide. Here, we use a dynamic combinatorial chemistry approach to optimize heparin binders with submicromolar affinity. The recognition of heparin by the most amplified members of the dynamic library has been studied with different experimental (SPR, fluorescence, NMR) and theoretical approaches, rendering a detailed interaction model. The enzymatic assays with selected library members confirm the correlation between the dynamic covalent screening and the in vitro heparin inhibition. Moreover, both ex vivo and in vivo blood coagulation assays with mice show that the optimized molecules are potent antidotes with potential use as heparin reversal drugs. Overall, these results underscore the power of dynamic combinatorial chemistry targeting complex and elusive biopolymers., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Electrical evaluation of bacterial virulence factors using nanopores

  • Escosura Muñiz, Alfredo de la
  • Ivanova, Kristina Dimitrova
  • Tzanov, Tzanko
In this work, we propose a novel methodology for electrical monitoring using nanoporous alumina membranes of virulence factors secreted by bacterial pathogens. Bacterial hyaluronidase (HYAL), which is produced by a number of invasive Gram-positive bacteria, is selected as a model compound to prove the concept. Our electrochemical setup takes advantage of the flat surface of indium tin oxide/poly(ethylene terephthalate) (ITO/PET) electrodes for their assembly with the nanoporous membrane. The proposed analytical method, based on the electrical monitoring of the steric/electrostatic nanochannels blocked upon formation of an antibody–HYAL immunocomplex, reached detection limits as low as 64 UI/mL (17.3 U/mg) HYAL. The inert surface of the ITO/PET electrodes together with the anti-biofilm properties of the 20 nm pore-sized alumina membranes allows for culturing the bacteria, capturing the secreted enzymes inside the nanochannels, and removing the cells before the electrochemical measurement. Secreted HYAL at levels of 1000 UI/mL (270 U/mg) are estimated in Gram-positive Staphylococcus aureus cultures, whereas low levels are detected for Gram-negative Pseudomonas aeruginosa (used as a negative control). Finally, HYAL secretion inhibition by RNAIII-inhibiting peptide (YSPWTNF-NH2) is also monitored, opening the way for further applications of the developed monitoring system for evaluation of the antivirulence potential of different compounds. This label-free method is rapid and cheap, avoiding the use of the time-consuming sandwich assays. We envisage future applications for monitoring of bacterial virulence/invasion as well as for testing of novel antimicrobial/antivirulence agents., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo preliminar (WorkingPaper)

Intervenció educativa eficaç en justícia juvenil

  • Alba Robles, José Luis
La recerca presenta el resultat de la segona aplicació del Programa del Pensament Prosocial, Versió Curta per a Joves en una mostra de menors que han complert mesures judicials en un equip de Medi Obert de Lleida. Aquest programa cognitiu-conductual entrena en l’aprenentatge d’habilitats sociocognitives i valors que es requereixen per la competència social i s’ha aplicat amb èxit a joves infractors i adults de 14 països de tot el món a més de quaranta mil subjectes. La recerca aplica el programa utilitzant com a mètode un disseny pre-test i post-test amb grup de control. Dels resultats es destaca que l’aplicació del programa incorpora en la intervenció en medi obert un canvi important en el plantejament de treball, ja que els instruments estan específicament dissenyats per a menors que s’han mostrat més resistents a altres intervencions., La investigación presenta los resultados de la aplicación de un Programa de intervención sobre jóvenes infractores en medio abierto en la ciudad de Lleida, para evaluar la validez de un programa cognitivo-conductual que ya se ha aplicado a más de cuarenta mil sujetos de 14 países de todo el mundo., The research presents the results of an Intervention program applied on young infractors who were under probation in the city of Lleida. The goal of the research was to validate a cognitive-behavioral program that has been applied to more than forty thousand people from 14 countries all over the world., info:eu-repo/semantics/publishedVersion
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Global configurations of singularities for quadratic differential systems with exactly three finite singularities of total multiplicity four

  • Artés, Joan C.|||0000-0003-4332-7495
  • Llibre, Jaume|||0000-0002-9511-5999
  • Schlomiuk, Dana
  • Vulpe, Nicolae
In this article we obtain the geometric classification of singularities, finite and infinite, for the two subclasses of quadratic differential systems with total finite multiplicity m_f=4 possessing exactly three finite singularities, namely: systems with one double real and two complex simple singularities (31 configurations) and (ii) systems with one double real and two simple real singularities (265 configurations). We also give here the global bifurcation diagrams of configurations of singularities, both finite and infinite, with respect to the geometric equivalence relation, for these classes of quadratic systems. The bifurcation diagram is done in the 12-dimensional space of parameters and it is expressed in terms of polynomial invariants. This gives an algorithm for determining the geometric configuration of singularities for any system in anyone of the two subclasses considered.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Parallelization of the Lyapunov constants and cyclicity for centers of planar polynomial vector fields

  • Liang, Haihua
  • Torregrosa, Joan|||0000-0002-2753-1827
Christopher in 2006 proved that under some assumptions the linear parts of the Lyapunov constants with respect to the parameters give the cyclicity of an elementary center. This paper is devote to establish a new approach, namely parallelization, to compute the linear parts of the Lyapunov constants. More concretely, it is showed that parallelization computes these linear parts in a shorter quantity of time than other traditional mechanisms. To show the power of this approach, we study the cyclicity of the holomorphic center =iz z^2 z^3 z^n under general polynomial perturbations of degree n, for n 13. We also exhibit that, from the point of view of computation, among the Hamiltonian, time-reversible, and Darboux centers, the holomorphic center is the best candidate to obtain high cyclicity examples of any degree. For n=4,5, 13, we prove that the cyclicity of the holomorphic center is at least n^2 n-2. This result give the highest lower bound for M(6), M(7), M(13) among the existing results, where M(n) is the maximum number of limit cycles bifurcating from an elementary monodromic singularity of polynomial systems of degree n. As a direct corollary we also obtain the highest lower bound for the Hilbert numbers H(6) 40, H(8) 70, and H(10) 108, because until now the best result was H(6) 39, H(8) 67, and H(10) 100.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Period sets of linear toral endomorphisms on T^2

  • Llibre, Jaume|||0000-0002-9511-5999
  • Neumärker, Natascha
The period set of a dynamical system is defined as the subset of all integers n such that the system has a periodic orbit of length n. Based on known results on the intersection of period sets of torus maps within a homotopy class, we give a complete classification of the period sets of (not necessarily invertible) toral endomorphisms on the 2-dimensional torus T^2.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Periodic orbits for a generalized Friedmann-Robertson-Walker Hamiltonian system in dimension 6