Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 116
Encontrada(s) 2 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The gut microbiota as a predictor of feed efficiency and feeding behavior in Iberian pigs

  • Nuñez, Pedro|||0000-0002-4223-2171
  • Casto-Rebollo, Cristina|||0000-0003-4646-345X
  • Martinez-Boggio, Guillermo|||0000-0003-3597-9426
  • Negro Rama, Sara|||0000-0002-2984-873X
  • Casellas Vidal, Joaquim|||0000-0002-4982-3556
  • Varona, Luis|||0000-0001-6256-5478
  • Pena, RN.|||0000-0002-3558-7302
  • Peñagaricano, Francisco|||0000-0001-6661-3991
  • Ibañez-Escriche, Noelia|||0000-0002-6221-3576
In recent years, the production system of Iberian pigs has been significantly intensified, with new technologies playing a crucial role in recording traits such as feed efficiency. These advances also allow the study of different traits related to feeding behavior. In addition, the composition of the gut microbiota has previously been associated with animal health and performance. This study evaluated the relationship between the host genetics, the gut microbiota, and traits of feed efficiency and feeding behavior up to 180 d of age. First, we quantified the phenotypic variance explained by the host genetics and the gut microbiota using fecal samples collected at 2-time points: 140 and 180 d. Second, we evaluated whether the microbiota at 140 d could serve as an early predictor of phenotypes measured at 180 d. Identifying accurate early predictors may serve as a valuable tool to support future strategies aimed at reducing testing duration in the nucleus of selection. Our results indicate that microbiota accounts for a low to moderate proportion of total phenotypic variance and improves model fit for feed efficiency traits when included. Furthermore, the inclusion of microbiota data at 140 d improved the prediction of feed efficiency traits at 180 d but did not improve predictions for feeding behavior. This study provides valuable insights into variance component estimation for feed efficiency and feeding behavior traits in Iberian pigs fed with automatic feeders and highlights new opportunities to explore the role of microbiota in feed efficiency. This research evaluates the influences of the host genetics and gut microbiota on feed efficiency and feeding behavior in Iberian pigs, highlighting the potential of gut microbiota to improve feed efficiency predictions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Inactivated Rothia nasimurium promotes a persistent antiviral immune status in porcine alveolar macrophages

  • Tort-Miró, Aida
  • Alonso, Uxía
  • Martín-Mur, Beatriz|||0000-0002-6006-3295
  • Muñoz-Basagoiti, Jordana|||0000-0002-0384-5928
  • Zeng, Yan
  • Marín Moraleda, David
  • Ezcurra, Enrique
  • Montaner Tarbes, Sergio|||0000-0002-7664-3382
  • Navas, María Jesús
  • Muñoz, Marta
  • Monleón, Paula
  • González-Oliver, Judith
  • Cano, Esmeralda
  • Vilalta, Carles|||0000-0002-9220-8620
  • Caballé, Marc
  • Criado Mesas, Lourdes|||0000-0002-1115-4131
  • Kochanowski, Karl|||0000-0002-1884-7694
  • Accensi Alemany, Francesc|||0000-0001-9068-0377
  • Aragón, Virginia|||0000-0002-3470-6015
  • Correa-Fiz, Florencia|||0000-0002-9459-5871
  • Esteve-Codina, Anna|||0000-0003-0361-2873
  • Rodríguez Rey, Fernando
  • Argilaguet, Jordi|||0000-0001-5924-2774
Globalization has increased the incidence of infectious diseases in livestock, further aggravated by the reduction of antibiotic usage. To minimize the resulting economic consequences to the meat production industry, as well as the risk of zoonotic events, the use of immunostimulants has emerged as a potential strategy to enhance animal resilience to diseases. In particular, the capability of bacterial-based immunostimulants to modulate innate immune cells functionality makes them cost-effective candidates as vaccine adjuvants, antimicrobials, or preventive immunostimulators inducing long-term innate immune memory in livestock. However, further research is required to identify novel bacterial strains with immunostimulatory properties. Here we characterized in vitro the immunostimulatory properties of Rothia nasimurium isolated from warthog fecal microbiota. Stimulation with heat-inactivated Rothia induced cytokine production by porcine immune cells, and a robust innate immune transcriptomic signature in porcine alveolar macrophages. Interestingly, the bacteria induced inflammasome activation and IL-1β production, thus confirming its pro-inflammatory properties, and suggesting its potential as vaccine adjuvant. Importantly, this immunostimulatory status functionally resulted in an antimicrobial state, enhancing the phagocytic capability of alveolar macrophages, and hampering the replication levels of two major porcine viral pathogens: the porcine reproductive and respiratory syndrome virus (PRRSV) and the African swine fever virus (ASFV). Moreover, macrophages showed an enhanced cytokine response upon ASFV infection several days after heat-inactivated Rothia stimulation, suggesting the induction of an innate immune memory phenotype. This nonspecific response resulted in a significant reduction of ASFV replication kinetics, demonstrating the capacity of the bacteria to induce a more resistant state in macrophages against a virus infection. Altogether, these results demonstrate the immunostimulatory capability of heat-inactivated R. nasimurium in porcine macrophages, showing potential to enhance animal resilience to diseases through the modulation of innate immune cells responsiveness to infections.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Early-Stage Breast Cancer Detection in Breast Milk

  • Saura Manich, Cristina|||0000-0001-8296-5065
  • Ortiz, Carolina|||0000-0002-5523-829X
  • Matito, Judit|||0000-0001-7560-7737
  • Arenas, Enrique J.|||0000-0001-7076-2666
  • Suñol Camas, Anna
  • Martín, Ágatha|||0000-0003-4818-6433
  • Cordoba Cardona, Octavi|||0000-0002-9591-7430
  • Martínez-Sabadell, Alex|||0000-0002-9477-1396
  • Garcia-Ruiz, Itziar|||0000-0002-0717-7795
  • Miranda, Ignacio|||0000-0002-4813-5946
  • Morales-Comas, Clara|||0000-0001-6771-6749
  • Carrasco, Estela|||0000-0003-1964-7675
  • Viaplana, Cristina|||0000-0001-8904-4330
  • Peg, Vicente|||0000-0002-5203-6166
  • Nuciforo, Paolo|||0000-0003-1380-0990
  • Bayó-Puxan, Neus|||0000-0001-9909-1499
  • González Medina, Alberto, 1990-|||0000-0002-2819-9053
  • Miquel, Josep M.|||0000-0002-9262-4464
  • Gómez-Rey, Marina|||0000-0002-9636-3281
  • Villacampa Javierre, Guillermo|||0000-0003-4868-6585
  • Arévalo, Silvia|||0000-0001-8169-1322
  • Espinosa-Bravo, Martín|||0000-0002-4293-3875
  • Balmaña Gelpí, Judith|||0000-0002-0762-6415
  • Dienstmann, Rodrigo|||0000-0001-5997-318X
  • Arribas, Joaquín V.|||0000-0002-0504-0664
  • Tabernero, Josep|||0000-0002-2495-8139
  • Vivancos, Ana|||0000-0003-2888-6512
  • Sansó, Miriam|||0000-0001-7155-4041
The presence of cell-free tumor DNA was reported in breast milk from patients with breast cancer, and its use as a screening method surpassed plasma liquid biopsy in terms of detecting and molecularly profiling early-stage tumors, even prior to diagnosis. For the first time, we show that BM obtained from patients with breast cancer carries ctDNA, surpassing plasma-based liquid biopsy for detection and molecular profiling of early-stage breast cancer, even prior to diagnosis by image.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Anti-SARS-CoV-2 antibodies from severe COVID-19 individuals or S2 immunizations do not worsen disease in hamsters

  • Pedreño López, Núria|||0000-0001-6927-2301
  • Tarrés-Freixas, Ferran|||0000-0002-1569-0126
  • Usai, Carla|||0000-0002-6373-2765
  • Raïch-Regué, Dàlia|||0000-0001-7656-5700
  • Benet, Susana|||0000-0002-2219-8826
  • Ainsua-Enrich, Erola|||0000-0001-7901-5798
  • Carabelli, Julieta|||0000-0003-2329-3996
  • Pradenas, Edwards|||0000-0001-5162-8920
  • Avila-Nieto, Carlos
  • Roca, Núria
  • Cantero, Guillermo|||0000-0003-4200-503X
  • Pérez, Mònica
  • Rodriguez de la Concepción, Maria Luisa|||0000-0002-6944-3462
  • Matilla, Marina
  • Revollo, Boris|||0000-0001-9245-2183
  • Hernández, Agnes
  • Abad Capa, Jorge|||0000-0002-8129-7859
  • Mothe, Beatriz|||0000-0001-9975-407X
  • Moltó, Jose
  • Mateu, Lourdes|||0000-0001-7223-7611
  • Massanella, Marta|||0000-0002-3326-151X
  • Izquierdo Useros, Nuria|||0000-0002-1039-1821
  • Blanco, Julià|||0000-0002-2225-0217
  • Clotet Sala, Bonaventura|||0000-0003-3232-4598
  • Segalés Coma, Joaquim|||0000-0002-1539-7261
  • Vergara-Alert, Júlia|||0000-0001-7484-444X
  • Carrillo, Jorge|||0000-0003-0221-5948
Severe COVID-19 associates with humoral immune response dysregulation. While antibodies confer protection against SARS-CoV-2, evidence also support their putative contribution to disease severity. Our study demonstrates that higher levels of S2-IgG, and S2-, RBD-, and Nucleocapsid-IgA differentiate severe and non-severe cases. However, no major antibody functional differences are found between both COVID-19 manifestations. Enhanced Fc-dependent functions in severe cases are primarily driven by increased antibody titers. No differences in antibody avidity are found between severe and non-severe cases, but a gradation in binding strength across specificities suggests that early anti-RBD, -S2, and -Nucleocapsid antibodies may originate from different pathways. In golden Syrian hamsters, S2 immunization or transfer of RBD-depleted antibodies isolated from severe and non-severe cases promote a faster clinical recovery after SARS-CoV-2 challenge, despite a transient initial weight loss. These findings indicate that antibodies are not major determinants of COVID-19 severity and suggest additional factors influencing disease outcomes. Functional analysis of antibody responses against SARS-CoV-2 shows their role in the development of SARS-CoV-2-induced severe disease in golden Syrian hamsters.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Intensive antibiotic treatment of sows with parenteral crystalline ceftiofur and tulathromycin alters the composition of the nasal microbiota of their offspring

  • Bonillo-Lopez, Laura
  • Obregon-Gutierrez, Pau|||0000-0002-6897-2792
  • Huerta, Eva
  • Correa-Fiz, Florencia|||0000-0002-9459-5871
  • Sibila Vidal, Rosa Marina|||0000-0003-3867-1988
  • Aragón, Virginia|||0000-0002-3470-6015
The nasal microbiota plays an important role in animal health and the use of antibiotics is a major factor that influences its composition. Here, we studied the consequences of an intensive antibiotic treatment, applied to sows and/or their offspring, on the piglets’ nasal microbiota. Four pregnant sows were treated with crystalline ceftiofur and tulathromycin (CTsows) while two other sows received only crystalline ceftiofur (Csows). Sow treatments were performed at D-4 (four days pre-farrowing), D3, D10 and D17 for ceftiofur and D-3, D4 and D11 for tulathromycin. Half of the piglets born to CTsows were treated at D1 with ceftiofur. Nasal swabs were taken from piglets at 22–24 days of age and bacterial load and nasal microbiota composition were defined by 16 s rRNA gene qPCR and amplicon sequencing. Antibiotic treatment of sows reduced their nasal bacterial load, as well as in their offspring, indicating a reduced bacterial transmission from the dams. In addition, nasal microbiota composition of the piglets exhibited signs of dysbiosis, showing unusual taxa. The addition of tulathromycin to the ceftiofur treatment seemed to enhance the deleterious effect on the microbiota diversity by diminishing some bacteria commonly found in the piglets’ nasal cavity, such as Glaesserella, Streptococcus, Prevotella, Staphylococcus and several members of the Ruminococcaceae and Lachnospiraceae families. On the other hand, the additional treatment of piglets with ceftiofur resulted in no further effect beyond the treatment of the sows. Altogether, these results suggest that intensive antibiotic treatments of sows, especially the double antibiotic treatment, disrupt the nasal microbiota of their offspring and highlight the importance of sow-to-piglet microbiota transmission.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Differential Release of β-Casomorphins from A1 and A2 Milk During Standardized Gastrointestinal Digestion Quantified by CE-MS, Liberación diferencial de β-casomorfinas de la leche A1 y A2 durante la digestión gastrointestinal estandarizada, cuantificada mediante CE-MS.

  • Tehrani, Tahereh|||0009-0009-2893-3033
  • Pont, Laura|||0000-0003-0520-0450
  • Vergara-Barberan, María
  • Juan Godoy, Bibiana|||0000-0002-6870-179X
  • Trujillo, Antonio-José|||0000-0003-1437-6060
  • Benavente, Fernando|||0000-0002-1688-1477
β-Casein A1 and A2 (β-CN-A1 and β-CN-A2) are the two predominant β-CN proteoforms in bovine milk. β-CN-A1 has been associated with a greater propensity to release opioid peptides, such as β-casomorphin-7 (β-CM-7) and β-casomorphin-5 (β-CM-5), during gastrointestinal (GI) digestion, which may have adverse biological effects. This has stimulated growing interest in milk from cows carrying the β-CN A2A2 genotype (A2 milk), which requires reliable characterization methods. In this work, we developed a rapid, selective, and sensitive capillary electrophoresis-mass spectrometry (CE-MS) method for the accurate identification and quantification of β-CM-7 and β-CM-5 in milk hydrolysates from in vitro GI digestion of bovine milk. The method showed good linearity (R2 > 0.99, over 0.5-100 mg/L for β-CM-7 and 0.25-100 mg/L for β-CM-5), limits of detection (0.25 and 0.10 mg/L), and repeatability (<0.2% for times and <1.4% for areas), and tandem mass spectrometry (MS/MS)allowed confirmation. The methodwasappliedtoA1A1andA2A2milk digested using the standardized INFOGEST protocol, followed by solid-phase extraction. β-CM-7 was detected and quantified only in A1A1 digests (0.98 mg/L), whereas β-CM-5 was not detected (<0.10 mg/L). These results indicate a differential release of β-CMs from A1andA2milkandsupport the method's suitability for β-CM profiling, which may help assess A2 milk quality control and β-CM health impact.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

ProAKAP4 as a predictor of semen freezability in Asturcon ponies

  • Dordas-Perpinyà, Marta|||0000-0002-5676-9009
  • Catalán, Jaime|||0000-0002-0878-7819
  • Sergeant, Nicolas|||0000-0003-1448-124X
  • Yánez-Ortiz, Iván|||0000-0002-3613-2481
  • Martínez-Hernández, J.|||0000-0003-1344-8333
  • Tamargo, Carolina|||0000-0002-4484-8981
  • Hidalgo Ordóñez, Carlos Olegario|||0000-0002-9810-1517
  • Briand-Amirat, Lamia|||0000-0003-1053-8077
  • Miró, Jordi|||0000-0002-1085-0039
Background Cryopreservation is a valuable tool in equine reproduction, although its success remains highly variable among stallions. The proAKAP4 protein has been proposed as a molecular marker of sperm quality and cryotolerance. Aims/objectives This study aimed to evaluate the relationship between proAKAP4 concentration and sperm cryotolerance in ejaculates from Asturcon ponies, and to assess whether proAKAP4 levels in fresh semen can predict post-thaw sperm quality parameters before and after cryopreservation. Methods Twenty-four ejaculates from eight different stallions were used (three ejaculates per animal). Fresh and thawed ejaculates, as well as those frozen with BotuCRIO and FAO extender, were classified into two groups based on proAKAP4 concentration (low or high) using complete linkage hierarchical cluster analysis. Sperm quality was assessed using computer-assisted sperm analysis and flow cytometry, including evaluations of motility, viability, morphology, acrosome integrity, and plasma membrane lipid disorder. ProAKAP4 concentration was measured using a commercial ELISA kit. Results Fresh and frozen ejaculates with high proAKAP4 concentrations exhibited higher total motility, progressive motility, and sperm membrane integrity (P < 0.05) than ejaculates with lower proAKAP4 concentrations. Ejaculates frozen with BotuCRIO and FAO extender and classified as having high proAKAP4 concentrations also displayed improved (P < 0.05) total and progressive motility. BotuCRIO samples with high proAKAP4 levels showed higher (P < 0.05) plasma and acrosomal membrane integrity, and lower (P < 0.05) membrane lipid disorder compared to those with lower proAKAP4 levels. A pre-freeze ProAKAP4 concentration threshold of 70.33 ng/10 spermatozoa was identified as predictive of good freezability, and a post-thaw threshold of 40 ng/10 spermatozoa was associated with acceptable quality. Conclusion These findings confirm that proAKAP4 is a promising biomarker for semen cryotolerance and support its integration into routine semen evaluation protocols for stallion selection.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Opportunistic commercial formation flights in continental airspace for greener aviation

  • Bracons Escarre, Oriol|||0009-0003-6882-708X
  • Verdonk Gallego, Christian Eduardo|||0000-0003-0504-0143
  • Piera, Miquel Àngel|||0000-0002-7227-7944
At a time of growing demand in commercial aviation, it is important to establish a trade-off between environmental impact, efficiency, and capacity. This is assessed through the study of Air Streams under a multi-criteria approach that pave the way for the deployment of commercial Formation Flights in continental airspace. This study describes a methodology to design Air Streams that could foster an efficient opportunistic Formation Flights pairing among aircraft. An evaluation of the main traffic flows that make up European airspace is conducted, followed by the design of two Air Streams. An study of potential use and savings is carried out, to evaluate Air Streams and Formation Flights synergy. The results of the heuristics applied show that Air Stream could manage around 10% of the aircraft flying in the airstream nearby area implementing Formation Flights. Significant savings could be achieved by the combination of Air Streams and Formation Flights concepts. The study estimates over 1600 tonnes of Fuel and over 5000 tonnes of CO2 savings annually, only with the use case scenario evaluated.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Energy, surplus and the economic process

  • Kallis, Giorgos|||0000-0003-0688-9552
  • Cattaneo, Claudio|||0000-0001-7049-9298
  • Varvarousis, Angelos|||0000-0003-4300-6456
  • Tsagkari, Marula|||0000-0002-7925-3769
  • Conde, Marta|||0000-0003-0220-6080
  • D'Alisa, Giacomo|||0000-0001-9472-2837
  • Hanacek, Ksenija|||0000-0001-5283-2309
  • Nogué-Algueró, Borja|||0000-0003-3376-9564
  • Sekulova, Filka Tsvetkova|||0000-0001-6827-5359
  • Slameršak, Aljoša|||0000-0001-5643-0331
This paper analyses the economic process through the concept of surplus, combining insights from ecological economics, Marxist political economy and anthropology. Humans, we argue, appropriate surplus energy with their labor from nature and apply it to transform matter into goods and services, with entropy increasing along the way. How societies distribute and expend their surpluses gives them some of their signature features. In hierarchical societies, the ruling classes control a great share of the surplus and expend it in ways that reproduce their power. Economic growth, a distinctive feature of capitalist civilization, is the result of the ruling capitalist class investing surplus in the means of production in order to make more surplus. Surplus is extracted both via technological innovation that increases productivity and by social domination that reduces the share of surplus that goes back to workers or nature. Growth, however, is not only a material process but also a hegemonic story told by the capitalist class to dress its private interest as general interest, legitimating control over the destiny of surplus. Our framework proposes a political, ecological-economic theory of growth, provides a foundation for analyzing degrowth, and sheds new light on longstanding debates between ecological economists and Marxists.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Structural and optical characteristics of epitaxially grown AlGaAsBi on GaAs for potential application in ultra-low noise avalanche photodiodes

  • Braza Blanco, María Verónica
  • Ben Fernández, Teresa
  • Fernández de los Reyes, Daniel
  • Bailey, Nicholas James
  • Carr, Matthew R.
  • Richards, RD
  • González Robledo, David
The recent addition of Bi to GaAs has been demonstrated to be an effective method for reducing excess noise in avalanche photodiodes (APDs), owing to the significant decrease in the hole ionization coefficient. It has been proposed that the incorporation of group III elements in GaAsBi alloys, such as Al, could facilitate the development of a novel class of ultra-low noise APDs utilizing GaAs substrates. However, the structural attributes of these novel alloys have not yet been comprehensively investigated, and the inclusion of Al can potentially exacerbate the significant challenges associated with the integration of Bi into GaAs. The influence of different parameters in AlGaAsBi alloys, such as the Bi flux and III/As ratio, was examined using transmission scanning electron microscopy, Nomarsky microscopy, and photoluminescence techniques. In addition to analyzing the quality of the interfaces, particular attention has been devoted to the occurrence of volcano-shaped surface nanomotifs. Two distinct types of nano-motifs associated with Bi-Al and Ga-Al-Bi droplet formation during AlGaAsBi deposition under different conditions were characterized. The growth regimes that govern the formation of surface droplets on AlGaAsBi were significantly altered by the concomitant presence of Al.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Individual pitch controller with static inverted decoupling for periodic blade load reduction on monopile offshore wind turbines

  • Lara, Manuel
  • Ruz Ruiz, Mario L.
  • Mulders, Sebastian Paul
  • Vázquez, Francisco
  • Garrido, J.
Embargado hasta 23/05/2027, Individual pitch control (IPC) is a technique used to reduce periodic blade loads in wind turbines. It generally uses the multiblade coordinate transformation to convert blade load measurements from a rotating frame into a two-axes non-rotating frame. Although these non-rotating axes are assumed to be decoupled, studies reveal persistent interactions. Reducing this coupling, such as by introducing an azimuth offset, enhances IPC performance. This study explores the impact of static inverted decoupling, which decouples the process in the steady state, on IPC performance. The proposed IPCs are adaptive, scheduling controller and decoupling gains based on operational conditions. In such IPC designs, the integral gains of the diagonal controllers and the decoupling elements can either be the same or different. These methods were validated on a simulated 15 MW wind turbine. Controller parameter optimization was accomplished through genetic algorithms to minimize blade fatigue loads, measured via the damage equivalent load (DEL). Results indicate that incorporating static inverted decoupling into IPC improves blade load reduction without increasing pitch actuator effort. IPCs with similar integral gains and matching absolute values in decoupling elements achieved the best balance between DEL reduction and complexity with minimal actuator effort, while additional optimization parameters provided negligible improvements.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Reseña (Review)

Living in drylands: Functional adaptations of trees and shrubs to cope with high temperatures and water scarcity

  • Peguero-Pina, J.J.
  • Vilagrosa, A.
  • Alonso-Forn, D.
  • Ferrio, J.P.
  • Sancho-Knapik, D.
  • Gil-Pelegrín, E.
Plant functioning and survival in drylands are affected by the combination of high solar radiation, high temperatures, low relative humidity, and the scarcity of available water. Many ecophysiological studies have dealt with the adaptation of plants to cope with these stresses in hot deserts, which are the territories that have better evoked the idea of a dryland. Nevertheless, drylands can also be found in some other areas of the Earth that are under the Mediterranean-type climates, which imposes a strong aridity during summer. In this review, plant species from hot deserts and Mediterranean-type climates serve as examples for describing and analyzing the different responses of trees and shrubs to aridity in drylands, with special emphasis on the structural and functional adaptations of plants to avoid the negative effects of high temperatures under drought conditions. First, we analyze the adaptations of plants to reduce the input of energy by diminishing the absorbed solar radiation through (i) modifications of leaf angle and (ii) changes in leaf optical properties. Afterwards, we analyze several strategies that enhance the ability for heat dissipation through (i) leaf size reduction and changes in leaf shape (e.g., through lobed leaves), and (ii) increased transpiration rates (i.e., water-spender strategy), with negative consequences in terms of photosynthetic capacity and water consumption, respectively. Finally, we also discuss the alternative strategy showed by water-saver plants, a common drought resistance strategy in hot and dry environments that reduces water consumption at the expense of diminishing the ability for leaf cooling. In conclusion, trees and shrubs living in drylands have developed effective functional adaptations to cope with the combination of high temperature and water scarcity, all of them with clear benefits for plant functioning and survival, but also with different costs concerning water use, carbon gain, and/or leaf cooling.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Sulfur-doped carbon nanohorn bifunctional electrocatalyst for water splitting

  • Kagkoura, A.
  • Arenal, R.
  • Tagmatarchis, N.
Sulfur-doped carbon nanohorns (S-CNHs) were prepared by an easy one-pot solvothermal process and were employed as efficient electrocatalysts towards water splitting. Initially, oxidation of CNHs followed by thermal treatment with the Lawesson’s reagent resulted in the formation of S-CNHs with the sulfur content determined as high as 3%. The S-CNHs were thoroughly characterized by spectroscopic, thermal and electron microscopy imaging means and then electrocatalytically screened. Specifically, S-CNHs showed excellent activity and durability for both O2 and H2 evolution reactions, by showing low overpotential at 1.63 and -0.2 V vs. RHE for oxygen and hydrogen evolution reaction, respectively. Additionally, S-CNHs showed significantly lower Tafel slope value and lower current resistance compared to oxidized and pristine CNHs for both electrocatalytic reactions. The outstanding electrocatalytic properties and high conductivity, along with the high S-doping level, render S-CNHs a promising bifunctional electrocatalyst for water splitting.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Microelectronic cmos implementation of a machine learning technique for sensor calibration

  • Martinez-Nieto, J.A.
  • Sanz-Pascual, M.T.
  • Medrano, N.
  • Calvo Lopez, B.
  • Antolín Cañada, D.
An integrated machine-learning based adaptive circuit for sensor calibration implemented in standard 0.18μm CMOS technology with 1.8V power supply is presented in this paper. In addition to linearizing the device response, the proposed system is also capable to correct offset and gain errors. The building blocks conforming the adaptive system are designed and experimentally characterized to generate numerical high-level models which are used to verify the proper performance of each analog block within a defined multilayer perceptron architecture. The network weights, obtained from the learning phase, are stored in a microcontroller EEPROM memory, and then loaded into each of the registers of the proposed integrated prototype. In order to verify the proposed system performance, the non-linear characteristic of a thermistor is compensated as an application example, achieving a relative error er below 3% within an input span of 130°C, which is almost 6 times less than the uncorrected response. The power consumption of the whole system is 1.4mW and it has an active area of 0.86mm 2 . The digital programmability of the network weights provides flexibility when a sensor change is required.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Southeastern rear edge populations of quercus suber l. Showed two alternative strategies to cope with water stress

  • Ghouil, H.
  • Sancho-Knapik, D.
  • Mna, A.B.
  • Amimi, N.
  • Ammari, Y.
  • Escribano, R.
  • Alonso-Forn, D.
  • Ferrio, J.P.
  • Peguero-Pina, J.J.
  • Gil-Pelegrín, E.
Climate change models predict an increase in aridity, especially in the regions under Mediterranean-type climates such as the Mediterranean Basin. However, there is a lack of ecophysiological studies supporting the selection of the more drought-adapted ecotypes for reforestation programs. In this study, we analyzed the anatomical and functional adaptations of 18-month-old seedlings to drought on 16 Quercus suber L. populations from the southeastern rear edge of the species distribution in northern Tunisia growing in a common garden, in order to identify the most appropriate material to use in reforestations. The results evidenced that populations from more xeric habitats displayed the highest leaf dry mass per area (LMA) and lowest leaf area (LA) values, together with the largest increase in the bulk modulus of elasticity (Δε) in response to drought (i.e., elastic adjustment). On the other hand, some populations with intermediate values of aridity, LMA and LA displayed the sharpest increase in proline concentration (ΔPro), with a concomitant increase in osmotic potential at full turgor (Δπo) (i.e., osmotic adjustment). Therefore, two different strategies seem to drive the within-species variation of the studied Q. suber populations in response to water scarcity: (i) a water saver strategy for improving water stress tolerance through the maximization of the elastic adjustment; and (ii) a water spender strategy for maintaining water absorption and photosynthetic activity under moderate water stress through the maximization of the osmotic adjustment. We concluded that the higher elastic adjustment, together with reduced LA and increased LMA, implied a better performance under drought stress in the populations of Q. suber from more xeric habitats, which can be considered the most drought-adapted ecotypes and, consequently, the most appropriate for reforestation programs under an eventual increase in aridity.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Analysis of the parametric correlation in mathematical modeling of in vitro glioblastoma evolution using copulas

  • Ayensa-Jiménez, J.
  • Pérez-Aliacar, M.
  • Randelovic, T.
  • Sanz-Herrera, J.A.
  • Hamdy Doweidar, M.
  • Doblaré, M.
Modeling and simulation are essential tools for better understanding complex biological processes, such as cancer evolution. However, the resulting mathematical models are often highly non-linear and include many parameters, which, in many cases, are difficult to estimate and present strong correlations. Therefore, a proper parametric analysis is mandatory. Following a previous work in which we modeled the in vitro evolution of Glioblastoma Multiforme (GBM) under hypoxic conditions, we analyze and solve here the problem found of parametric correlation. With this aim, we develop a methodology based on copulas to approximate the multidimensional probability density function of the correlated parameters. Once the model is defined, we analyze the experimental setting to optimize the utility of each configuration in terms of gathered information. We prove that experimental configurations with oxygen gradient and high cell concentration have the highest utility when we want to separate correlated effects in our experimental design. We demonstrate that copulas are an adequate tool to analyze highly-correlated multiparametric mathematical models such as those appearing in Biology, with the added value of providing key information for the optimal design of experiments, reducing time and cost in in vivo and in vitro experimental campaigns, like those required in microfluidic models of GBM evolution.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

1.0 v-0.18 µm CMOS tunable low pass filters with 73 db dr for on-chip sensing acquisition systems

  • Pérez-Bailón, Jorge
  • Calvo, Belén
  • Medrano, Nicolás
This paper presents a new approach based on the use of a Current Steering (CS) technique for the design of fully integrated Gm–C Low Pass Filters (LPF) with sub-Hz to kHz tunable cut-off frequencies and an enhanced power-area-dynamic range trade-off. The proposed approach has been experimentally validated by two different first-order single-ended LPFs designed in a 0.18 µm CMOS technology powered by a 1.0 V single supply: a folded-OTA based LPF and a mirrored-OTA based LPF. The first one exhibits a constant power consumption of 180 nW at 100 nA bias current with an active area of 0.00135 mm2 and a tunable cutoff frequency that spans over 4 orders of magnitude (~100 mHz–152 Hz @ CL = 50 pF) preserving dynamic figures greater than 78 dB. The second one exhibits a power consumption of 1.75 µW at 500 nA with an active area of 0.0137 mm2 and a tunable cutoff frequency that spans over 5 orders of magnitude (~80 mHz–~1.2 kHz @ CL = 50 pF) preserving a dynamic range greater than 73 dB. Compared with previously reported filters, this proposal is a competitive solution while satisfying the low-voltage low-power on-chip constraints, becoming a preferable choice for general-purpose reconfigurable front-end sensor interfaces.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enhanced piezoelectric fibered extracellular matrix to promote cardiomyocyte maturation and tissue formation: a 3d computational model

  • Urdeitx, P.
  • Doweidar, M.H.
Mechanical and electrical stimuli play a key role in tissue formation, guiding cell processes such as cell migration, differentiation, maturation, and apoptosis. Monitoring and controlling these stimuli on in vitro experiments is not straightforward due to the coupling of these different stimuli. In addition, active and reciprocal cell–cell and cell–extracellular matrix interactions are essential to be considered during formation of complex tissue such as myocardial tissue. In this sense, computational models can offer new perspectives and key information on the cell microenvironment. Thus, we present a new computational 3D model, based on the Finite Element Method, where a complex extracellular matrix with piezoelectric properties interacts with cardiac muscle cells during the first steps of tissue formation. This model includes collective behavior and cell processes such as cell migration, maturation, differentiation, proliferation, and apoptosis. The model has employed to study the initial stages of in vitro cardiac aggregate formation, considering cell–cell junctions, under different extracellular matrix configurations. Three different cases have been purposed to evaluate cell behavior in fibered, mechanically stimulated fibered, and mechanically stimulated piezoelectric fibered extra-cellular matrix. In this last case, the cells are guided by the coupling of mechanical and electrical stimuli. Accordingly, the obtained results show the formation of more elongated groups and enhancement in cell proliferation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Maximum rectilinear convex subsets

  • Gonzalez-Aguilar, H.
  • Orden, D.
  • Perez-Lantero, P.
  • Rappaport, D.
  • Seara, C.
  • Tejel, J.
  • Urrutia, J.
Let P be a set of n points in the plane. We consider a variation of the classical Erd\H os-Szekeres problem, presenting efficient algorithms with O(n3) running time and O(n2) space complexity that compute (1) a subset S of P such that the boundary of the rectilinear convex hull of S has the maximum number of points from P, (2) a subset S of P such that the boundary of the rectilinear convex hull of S has the maximum number of points from P and its interior contains no element of P, (3) a subset S of P such that the rectilinear convex hull of S has maximum area and its interior contains no element of P, and (4) when each point of P is assigned a weight, positive or negative, a subset S of P that maximizes the total weight of the points in the rectilinear convex hull of S. We also revisit the problems of computing a maximum area orthoconvex polygon and computing a maximum area staircase polygon, amidst a point set in a rectangular domain. We obtain new and simpler algorithms to solve both problems with the same complexity as in the state of the art.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A wireless instrumentation control system based on low-cost single board computer gateways

  • Enériz Orta, D.
  • Medrano, N.
  • Calvo, B.
Nowadays, most of the automatized measurement processes are carried out by VISA (Virtual Instrument Software Architecture) compatible instruments, that execute the instructions provided by a host computer connected through wired standard buses, as USB (Universal Serial Bus), GPIB (General-Purpose Instrumentation Bus), PXI (PCI eXtensions for Instrumentation) or Ethernet. To overcome the intrinsic limitations associated to these wired systems, this work presents an instrumentation control system based on the IEEE 802.11 wireless communications standard. Intended for instruments having a USB control port, this port is connected to a gateway based on a compact Raspberry Single Board Computer (SBC) and thus the instrument can be connected to the host computer via Wireless Fidelity (WiFi), easily allowing the deployment of an ad-hoc instruments communication network in the working area or its connection to a previously deployed general purpose WiFi network. Developed under Python, the operation commands, wireless link protocol, and USB connection allow two modes of operation to provide system flexibility: a live mode, where commands are sent individually from the host computer to the selected instrument; and a standalone mode, where a full measurement process can be entirely downloaded in the gateway to be autonomously executed on the instrumentation. The system performance in both operation modes, distance of operation, time latencies, and operating lifetime in battery operation have been characterized.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Maximizing utilization and minimizing migration in thermal-aware energy-efficient real-time multiprocessor scheduling

  • Rubio-Anguiano, L.E.
  • Chils Trabanco, A.
  • Briz Velasco, J.L.
  • Ramírez-Trevino, A.
This work proposes CAlECs, a clustered scheduling system for MPSoCs subject to thermal and energy constraints. It calculates off-line a cyclic executive honoring temporal and thermal constraints, for a hard real-time (HRT) task set at minimum frequency to reduce consumed energy, minimizing context switches and migrations. It also provides an on-line controller able to manage system and task parametric variations and soft real-time (SRT) tasks, always meeting the HRT task set constraints and the system thermal bound. CAlECS maximizes CPU utilization to help avoid overprovisioning contributing to a low SWaP factor. Its modular design allows the utilization of different modeling and scheduling approaches, and makes the off-line and on-line components independent from each other to better suit the requirements of a specific system. We experimentally show that the cyclic executive provided by CAlECS for HRT task sets outperforms RUN, a reference off-line algorithm in terms of optimal number of context switches.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Green Preparation of Thin Films of Polybenzimidazole on Flat and Hollow Fiber Supports: Application to Hydrogen Separation

  • Sanchez-Lainez, J.
  • Etxeberria-Benavides, M.
  • David, O.
  • Tellez, C.
  • Coronas, J.
This work shows the preparation of thin films, with thickness from 70 nm to 1 mu m, of meta-polybenzimidazole (m-PBI) on polyimide P84 supports. Ethanolic solutions of m-PBI were used to coat flat and hollow fiber supports of asymmetric P84 with m-PBI in a process where the coating and drying was performed at room temperature. A solution of NaOH in EtOH allowed the dissolution of the m-PBI powder, providing the perfect coating solution to build thin films of m-PBI without damaging the polymeric support. It also meant a green alternative, avoiding the use of toxic solvents, such as dimethylacetamide. The resulting membranes have been tested for the separation of H-2 mixtures at high temperature at different setups to allow checking their reproducibility. With 100 nm thickness the membranes showed their best gas separation performance. For flat membranes at 180 degrees C and 3 bar feed pressure a H-2 permeance of 48.5 GPU was obtained, with respective H-2/CO2 and H-2/N-2 selectivities of 33.3 and 55.8. Besides, the hollow fibers under a feed pressure of 6 bar and tested at the same temperature showed near 90 GPU of H-2 with a H-2/CO2 selectivity of 13.5 in the one-fiber module and over 39 GPU of H-2 with a H-2/CO2 selectivity of 20.2 in the five-fiber module. Finally, the stability of the membranes was proved for 22 days at 180 degrees C.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Analytical Model for Memory-Centric High Level Synthesis-Generated Applications

  • Dávila-Guzmán, María Angélica
  • Gran Tejero, Rubén
  • Villarroya-Gaudó, María
  • Suárez Gracia, Darío
High performance computing (HPC) demands huge memory bandwidth and computing resources to achieve maximum performance and energy efficiency. FPGAs can provide both, and with the help of High Level Synthesis, those HPC applications can be easily written in high level languages. However, the optimization process remains time-consuming, especially when based on trial-and-error bitstream generation. Model-based performance prediction is a practical and fast approach for kernel optimization, specially if done with information from pre-synthesis reports. This article presents an analytical model focused on memory intensive applications that captures the memory behavior and accurately predicts the kernel execution time within seconds rather than hours, as bitstream generation requires. The model has been validated with two DRAM technologies: DDR4 and HBM2, with a set of microbenchmarks and high performance computing applications showing an average error of 11% for DDR4 and 10% for HBM2. Compared with previous studies, our predictions at least halve the estimation error.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Complex free-space magnetic field textures induced by three-dimensional magnetic nanostructures

  • Donnelly, C
  • Hierro-Rodriguez, A
  • Abert, C
  • Witte, K
  • Skoric, L
  • Sanz-Hernandez, D
  • Finizio, S
  • Meng, FF
  • McVitie, S
  • Raabe, J
  • Suess, D
  • Cowburn, R
  • Fernandez-Pacheco, A
The design of complex, competing effects in magnetic systems-be it via the introduction of nonlinear interactions(1-4), or the patterning of three-dimensional geometriesm-is an emerging route to achieve new functionalities. In particular, through the design of three-dimensional geometries and curvature, intrastructure properties such as anisotropy and chirality, both geometry-induced and intrinsic, can be directly controlled, leading to a host of new physics and functionalities, such as three-dimensional chiral spin states(7), ultrafast chiral domain wall dynamicss(8-10) and spin textures with new spin topologies(7, 11). Here, we advance beyond the control of intrastructure properties in three dimensions and tailor the magnetostatic coupling of neighbouring magnetic structures, an interstructure property that allows us to generate complex textures in the magnetic stray field. For this, we harness direct write nanofabrication techniques, creating intertwined nanomagnetic cobalt double helices, where curvature, torsion, chirality and magnetic coupling are jointly exploited. By reconstructing the three-dimensional vectorial magnetic state of the double helices with soft-X-ray magnetic laminography(12, 13), we identify the presence of a regular array of highly coupled locked domain wall pairs in neighbouring helices. Micromagnetic simulations reveal that the magnetization configuration leads to the formation of an array of complex textures in the magnetic induction, consisting of vortices in the magnetization and antivortices in free space, which together form an effective B field cross-tie wall''s. The design and creation of complex three-dimensional magnetic field nanotextures opens new possibilities for smart materials(15), unconventional computing(2, 16), particle trapping(17, 18) and magnetic imaging(19).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A fully-integrated 180 nm CMOS 1.2 V low-dropout regulator for low-power portable applications

  • Pérez-Bailón, J.
  • Calvo, B.
  • Medrano, N.
This paper presents the design and postlayout simulation results of a capacitor-less low dropout (LDO) regulator fully integrated in a low-cost standard 180 nm Complementary Metal-Oxide-Semiconductor (CMOS) technology which regulates the output voltage at 1.2 V from a 3.3 to 1.3 V battery over a -40 to 120 degrees C temperature range. To meet with the constraints of system-on-chip (SoC) battery-operated devices, ultralow power (I-q = 8.6 mu A) and minimum area consumption (0.109 mm(2)) are maintained, including a reference voltage V-ref = 0.4 V. It uses a high-gain dynamically biased folded-based error amplifier topology optimized for low-voltage operation that achieves an enhanced regulation-fast transient performance trade-off.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Twisted One-Dimensional Charge Transfer and Related Y-Shaped Chromophores with a 4 H-Pyranylidene Donor: Synthesis and Optical Properties

  • Tejeda-Orusco, V.
  • Andreu, R.
  • Orduna, J.
  • Villacampa, B.
  • Franco, S.
  • Civera, A.
Three series of push-pull derivatives bearing 4H-pyranylidene as electron donor group and a variety of acceptors were designed. On one hand, one-dimensional chromophores with a thiophene ring (series 1H) or 5-dimethylaminothiophene moiety (series 1N) as an auxiliary donor, non-coplanar with the p-conjugated system, were synthesized. On the other hand, related two-dimensional (2D) Y-shaped chromophores (series 2) were also prepared to compare how the diverse architectures affect the electrochemical, linear, and second-order nonlinear optical (NLO) properties. The presence of the 5-dimethylaminothiophene moiety in the exocyclic C= C bond of the pyranylidene unit gives rise to oxidation potentials rarely low, and the protonation (with an excess of trifluoroacetic acid) of its derivatives results in the apparition of a new blue-shifted band in the UV-visible spectra. The analysis of the properties of derivatives with and without the additional thiophene ring shows that this auxiliary donor leads to a higher NLO response, accompanied by an enhanced transparency. Y-shaped chromophores of series 2 present a blue-shifted absorption, higher molar extinction coefficients, and higher Eox values compared to their linear twisted counterparts. As concerns NLO properties, 2D Y-shaped architecture gives rise to somewhat lower µß values (except for thiobarbiturate derivatives).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Optoelectronic properties of atomically thin moxw(1-x)s2 nanoflakes probed by spatially-resolved monochromated EELS

  • Pelaez-Fernandez, M.
  • Lin, Y.-C.
  • Suenaga, K.
  • Arenal, R.
Band gap engineering of atomically thin two-dimensional (2D) materials has attracted a huge amount of interest as a key aspect to the application of these materials in nanooptoelectronics and nanophotonics. Low-loss electron energy loss spectroscopy has been employed to perform a direct measurement of the band gap in atomically thin MoxW(1-x) S2 nanoflakes. The results show a bowing effect with the alloying degree, which fits previous studies focused on excitonic transitions. Additional properties regarding the Van Hove singularities in the density of states of these materials, as well as high energy excitonic transition, have been analysed as well. © 2021 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https:// creativecommons.org/licenses/by/ 4.0/).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

On plane subgraphs of complete topological drawings

  • García Olaverri A.
  • Tejel Altarriba J.
  • Pilz A.
Topological drawings are representations of graphs in the plane, where vertices are represented by points, and edges by simple curves connecting the points. A drawing is simple if two edges intersect at most in a single point, either at a common endpoint or at a proper crossing. In this paper we study properties of maximal plane subgraphs of simple drawings Dnof the complete graph Knon n vertices. Our main structural result is that maximal plane subgraphs are 2-connected and what we call essentially 3-edge-connected. Besides, any maximal plane subgraph contains at least [3n/2] edges. We also address the problem of obtaining a plane subgraph of Dnwith the maximum number of edges, proving that this problem is NP-complete. However, given a plane spanning connected subgraph of Dn, a maximum plane augmentation of this subgraph can be found in O(n3) time. As a side result, we also show that the problem of finding a largest compatible plane straight-line graph of two labeled point sets is NP-complete. © 2021 Society of Mathematicians, Physicists and Astronomers of Slovenia. All rights reserved.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Atmospheric pressure chemical vapor deposition growth of vertically aligned SnS2 and SnSe2 nanosheets

  • Sierra-Castillo, Ayrton
  • Haye, Emile
  • Acosta, Selene
  • Arenal, Raul
  • Bittencourt, Carla
  • Colomer, Jean-François
Laminated metal dichalcogenides are candidates for different potential applications ranging from catalysis to nanoelectronics. However, efforts are still needed to optimize synthesis methods aiming to control the number of layers, morphology, and crystallinity, parameters that govern the properties of the synthesized materials. Another important parameter is the thickness and the length of the samples with the possibility of large-scale growth of target homogeneous materials. Here, we report a chemical vapor deposition method at atmospheric pressure to produce vertically aligned tin dichalcogenide based-materials. Tin disulfide (SnS2) and tin diselenide (SnSe2) vertically aligned nanosheets have been synthesized and characterized by different methods showing their crystallinity and purity. Homogenous crystalline 2H-phase SnS2 nanosheets with high purity were synthesized with vertical orientation on substrates; sulfur vacancies were observed at the edges of the sheets. Similarly, in the crystalline 2H phase SnSe2 nanosheets selenium vacancies were observed at the edges. Moreover, these nanosheets are larger than the SnS2 nanosheets, show lower nanosheet homogeneity on substrates and contamination with selenium atoms from the synthesis was observed. The synthesized nanomaterials are interesting in various applications where the edge accessibility and/or directionality of the nanosheets play a major role as for example in gas sensing or field emission.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Rainbow polygons for colored point sets in the plane

  • Flores-Peñaloza D.
  • Kano M.
  • Martínez-Sandoval L.
  • Orden D.
  • Tejel J.
  • Tóth C.D.
  • Urrutia J.
  • Vogtenhuber B.
Given a colored point set in the plane, a perfect rainbow polygon is a simple polygon that contains exactly one point of each color, either in its interior or on its boundary. Let rb-index(S) denote the smallest size of a perfect rainbow polygon for a colored point set S, and let rb-index(k) be the maximum of rb-index(S) over all k-colored point sets in general position; that is, every k-colored point set S has a perfect rainbow polygon with at most rb-index(k) vertices. In this paper, we determine the values of rb-index(k) up to k=7, which is the first case where rb-index(k)¿k, and we prove that for k=5, [Formula presented] Furthermore, for a k-colored set of n points in the plane in general position, a perfect rainbow polygon with at most [Formula presented] vertices can be computed in O(nlogn) time. © 2021 Elsevier B.V.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Design and experimental validation of a magnetic device for stem cell culture

  • Salvador-Clavell, R.
  • Rodríguez-Fortún, J.M.
  • López, I.
  • Martín De Llano, J.J.
  • Orús, J.
  • Sancho-Tello, M.
  • Carda, C.
  • Hamdy Doweidar, M.
Cell culture of bone and tendon tissues requires mechanical stimulation of the cells in order to mimic their physiological state. In the present work, a device has been conceived and developed to generate a controlled magnetic field with a homogeneous gradient in the working space. The design requirement was to maximize the magnetic flux gradient, assuring a minimum magnetizing value in a 15 mm × 15 mm working area, which highly increases the normal operating range of this sort of devices. The objective is to use the machine for two types of biological tests: magnetic irradiation of biological samples and force generation on paramagnetic particles embedded in scaffolds for cell culture. The device has been manufactured and experimentally validated by evaluating the force exerted on magnetic particles in a viscous fluid. Apart from the magnetic validation, the device has been tested for irradiating biological samples. In this case, viability of human dental pulp stem cells has been studied in vitro after electromagnetic field exposition using the designed device. After three days of irradiation treatment, cellular microtissues showed a 59% increase in the viable cell number. Irradiated cells did not show morphological differences when compared with control cells.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Ruddlesden–Popper hybrid lead bromide perovskite nanosheets of phase pure n=2: Stabilized colloids stored in the solid state

  • Cevallos-Toledo R.B.
  • Rosa-Pardo I.
  • Arenal, R.
  • Oestreicher V.
  • Fickert M.
  • Abellán G.
  • Galian R.E.
  • Pérez-Prieto J.
Ruddlesden-Popper lead halide perovskite (RP-LHP) nano-nanostructures can be regarded as self-assembled quantum wells or superlattices of 3D perovskites with an intrinsic quantum well thickness of a single or a few (n=2-4) lead halide layers; the quantum wells are separated by organic layers. They can be scaled down to a single quantum well dimension. Here, the preparation of highly (photo)chemical and colloidal stable hybrid LHP nanosheets (NSs) of ca. 7.4 µm lateral size and 2.5 nm quantum well height (thereby presenting a deep blue emission at ca. 440 nm), is reported for the first time. The NSs are close-lying and they even interconnect when deposited on a substrate. Their synthesis is based on the use of the p-toluenesulfonic acid/dodecylamine (pTS/DDA) ligand pair and their (photo)chemical stability and photoluminescence is enhanced by adding EuBr2 nanodots (EuNDs). Strikingly, they can be preserved as a solid and stored for at least one year. The blue emissive colloid can be recovered from the solid as needed by simply dispersing the powder in toluene and then using it to prepare solid films, making them very promising candidates for manufacturing devices. © 2021 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

V-shaped pyranylidene/triphenylamine-based chromophores with enhanced photophysical, electrochemical and nonlinear optical properties

  • Gámez-Valenzuela S.
  • Neusser D.
  • Benitez-Martin C.
  • Najera F.
  • Guadix J.A.
  • Moreno-Yruela C.
  • Villacampa B.
  • Ponce Ortiz R.
  • Ludwigs S.
  • Andreu R.
  • Ruiz Delgado M.C.
We report the synthesis and comprehensive study of two chromophores based on 4H-pyranylidene moiety as a part of the p-conjugated spacer. Triphenylamine (TPA) acts as donor and tricarbonitrile-based electron-accepting groups complete these V-shaped D-A-D architectures (A, acceptor; D, donor). Their electrochemical, photophysical and nonlinear optical properties are analyzed in detail by using a joint experimental and theoretical approach. The two chromophores exhibit near-infrared fluorescence, large Stokes shift, enhanced emission in tetrahydrofuran/water mixtures and good photostability. Additionally, the dimerization of triphenylamine groups to tetraphenylbenzidine (TPB) takes place upon electrochemical and chemical oxidation showing their peculiar electrochemical behavior and film formation capabilities. Interestingly, high molecular first hyperpolarizabilities and two-photon absorption cross-sections were found, highlighting their potential applications in electro-optical devices. Overall, our work demonstrates that these near-infrared (NIR) fluorescent chromophores are versatile materials with a myriad of applications ranging from optoelectronics to biological applications. © 2021 The Royal Society of Chemistry.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Methylammonium lead bromide perovskite nano-crystals grown in a poly[styrene-co-(2-(dimethylamino)ethyl methacrylate)] matrix immobilized on exfoliated graphene nano-sheets

  • Stergiou, A.
  • Sideri, I. K.
  • Kafetzi, M.
  • Ioannou, A.
  • Arenal, R.
  • Mousdis, G.
  • Pispas, S.
  • Tagmatarchis, N.
Development of graphene/perovskite heterostructures mediated by polymeric materials may constitute a robust strategy to resolve the environmental instability of metal halide per-ovskites and provide barrierless charge transport. Herein, a straightforward approach for the growth of perovskite nano-crystals and their electronic communication with graphene is presented. Methylammonium lead bromide (CH3 NH3 PbBr3 ) nano-crystals were grown in a polystyrene-co-(2-(dimethylamino)ethyl methacrylate)], PSt-co-DMAEMA], bi-functional random co-polymer matrix and non-covalently immobilized on graphene. PSt-co-DMAEMA] was selected as a bi-modal polymer capable to stabilize the perovskite nano-crystals via electrostatic interactions between the tri-alkylamine amine sites of the co-polymer and the A-site vacancies of the perovskite and si-multaneously enable Van der Waals attractive interactions between the aromatic arene sites of the co-polymer and the surface of graphene. The newly synthesized CH3 NH3 PbBr3 /co-polymer and graphene/CH3 NH3 PbBr3 /co-polymer ensembles were formed by physical mixing of the components in organic media at room temperature. Complementary characterization by dynamic light scattering, microscopy, and energy-dispersive X-ray spectroscopy revealed the formation of uniform spherical perovskite nano-crystals immobilized on the graphene nano-sheets. Complementary photophysical characterization by UV-Vis absorption, steady-state, and time-resolved fluorescence spectroscopy unveiled the photophysical properties of the CH3 NH3 PbBr3 /co-polymer colloid perovskite solu-tion and verified the electronic communication within the graphene/CH3 NH3 PbBr3 /co-polymer ensembles at the ground and excited states. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Safe extended-range cycling of Li4Ti5O12-based anodes for ultra-high capacity thin-film batteries

  • Siller, V.
  • Gonzalez-Rosillo, J.
  • Nuñez Eroles, M.
  • Stchakovsky, M.
  • Arenal, R.
  • Morata, A.
  • Tarancón, A.
Lithium titanium oxide thin films are increasingly popular anode materials in microbatteries and hybrid supercapacitors, due to their improved safety, cost, and cycle lifetime. So far, research efforts have mainly focused on the pure spinel phase Li4Ti5O12 (LTO) and only a small fraction is dedicated to a broader spectrum of titanium-based metal oxide thin films. In this work, pulsed laser deposition is used in a multilayer approach by alternating LTO and Li2O ablations to create a heterogeneous landscape in the titania-based micro-anodes. This rich microstructure enables the safe extension of the accessible electrochemical window down to 0.2 V. This leads to extraordinary high specific capacities of 250–300 mAh/g at 1 C, maintaining a stable discharge capacity of 180 mAh/g at 16 C. Operando spectroscopic ellipsometry and Raman spectroscopy are used to track optical and structural changes as a function of the discharge voltage down to 0.01 V. A kinetically limited degradation mechanism based on the effective trapping of Li-ions at the octahedral 16c positions is proposed when cycling in the range of 0.2–0.01 V. In essence, our work contributes to titania-based nanoshapes as anodes of increased specific capacity due to a higher Li-site occupation, while maintaining their good stability and safety. © 2022 The Author(s)
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A novel approach for adapting the standard addition method to single particle-ICP-MS for the accurate determination of NP size and number concentration in complex matrices; 35414390

  • Aramendía, M.
  • García-Mesa, J. C.
  • Alonso, E. V.
  • Garde, R.
  • Bazo, A.
  • Resano, J.
  • Resano, M.
This paper presents a novel approach, based on the standard addition method, for overcoming the matrix effects that often hamper the accurate characterization of nanoparticles (NPs) in complex samples via single particle inductively coupled plasma mass spectrometry (SP-ICP-MS). In this approach, calibration of the particle size is performed by two different methods: (i) by spiking a suspension of NPs standards of known size containing the analyte, or (ii) by spiking the sample with ionic standards; either way, the measured sensitivity is used in combination with the transport efficiency (TE) for sizing the NPs. Moreover, such transport efficiency can be readily obtained from the data obtained via both calibration methods mentioned above, so that the particle number concentration can also be determined. The addition of both ionic and NP standards can be performed on-line, by using a T-piece with two inlet lines of different dimensions. The smaller of the two is used for the standards, thus ensuring a constant and minimal sample dilution. As a result of the spiking of the samples, mixed histograms including the signal of the sample and that of the standards are obtained. However, the use of signal deconvolution approaches permits to extract the information, even in cases of signal populations overlapping. For proofing the concept, characterization of a 50 nm AuNPs suspension prepared in three different media (i.e., deionized water, 5% ethanol, and 2.5% tetramethyl ammonium hydroxide-TMAH) was carried out. Accurate results were obtained in all cases, in spite of the matrix effects detected in some media. Overall, the approach proposed offers flexibility, so it can be adapted to different situations, but it might be specially indicated for samples for which the matrix is not fully known and/or dilution is not possible/recommended. © 2022 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Aberration-corrected transmission electron microscopy with Zernike phase plates

  • Hettler, S.
  • Arenal, R.
We explore the possibility of applying physical phase plates (PPs) in combination with aberration-corrected transmission electron microscopy. Phase-contrast transfer characteristics are calculated and compared for a thin-film based Zernike PP, a hole-free (HF) or Volta PP and an electrostatic Zach PP, considering their phase-shifting properties in combination with partial spatial coherence. The effect of slightly converging illumination conditions, often used in high-resolution applications, on imaging with PPs is discussed. Experiments with an unheated Zernike PP applied to various nanomaterial specimens and a qualitative analysis clearly demonstrates the general compatibility of PPs and aberration-corrected transmission electron microscopy. Calculations and experiments show the benefits of the approach, among which is a strong phase-contrast enhancement of a large range of spatial frequencies. This allows the simultaneous imaging of atomic-resolution structures and morphological features at the nanometer scale, with maximum phase contrast. The calculations can explain why the HFPP damps contrast transfer at higher spatial frequencies. © 2022 The Author(s)
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Synthesis of ZIF-94 from Recycled Mother Liquors: Study of the Influence of Its Loading on Postcombustion CO2 Capture with Pebax Based Mixed Matrix Membranes

  • Hasan, M.R.
  • Paseta, Lorena
  • Malankowska, M.
  • Téllez, Carlos
  • Coronas, Joaquín
Global energy demand is met in large part, by burning of fossil fuels, which is causing global warming. Mixed matrix membranes (MMMs) with metal organic frameworks (MOFs) as fillers are an interesting alternative for capturing post combustion CO2 which would make the energy sector sustainable. This research is focused on the synthesis of MOF ZIF-94 from the recycling of its mother liquors and the incorporation of synthesized MOF into a Pebax MH 1657 for MMM fabrication. The pH and the temperature of ZIF-94 synthesis are modified and monitored and this results in various nanoparticle diameters (average particle size in the range of 41 ± 8–180 ± 73 nm). Incorporation of ZIF-94 significantly improves the performance of the bare Pebax MH 1657 membrane. The maximum CO2/N2 selectivity and CO2 permeability are obtained for 10 wt% ZIF-94 loading in 9 wt% (polymer concentration in 70/30 (v/v) ethanol/water solution) Pebax MH 1657 matrix being 36 ± 7 (71% increment compared to bare membrane) and 137 ± 31 Barrer (80% improvement), respectively. © 2021 The Authors. Advanced Sustainable Systems published by Wiley-VCH GmbH
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A detailed investigation of the onion structure of exchanged coupled magnetic Fe3-dO4@CoFe2O4@Fe3-dO4 nanoparticles

  • Sartori K.
  • Musat A.
  • Choueikani F.
  • Grenèche J.-M.
  • Hettler S.
  • Bencok P.
  • Begin-Colin S.
  • Steadman P.
  • Arenal R.
  • Pichon B.P.
Nanoparticles that combine several magnetic phases offer wide perspectives for cutting edge applications because of the high modularity of their magnetic properties. Besides the addition of the magnetic characteristics intrinsic to each phase, the interface that results from core-shell and, further, from onion structures leads to synergistic properties such as magnetic exchange coupling. Such a phenomenon is of high interest to overcome the superparamagnetic limit of iron oxide nanoparticles which hampers potential applications such as data storage or sensors. In this manuscript, we report on the design of nanoparticles with an onion-like structure which has been scarcely reported yet. These nanoparticles consist of a Fe3-dO4 core covered by a first shell of CoFe2O4 and a second shell of Fe3-dO4, e.g., a Fe3-dO4@CoFe2O4@Fe3-dO4 onion-like structure. They were synthesized through a multistep seed-mediated growth approach which consists consists in performing three successive thermal decomposition of metal complexes in a high-boiling-point solvent (about 300 °C). Although TEM micrographs clearly show the growth of each shell from the iron oxide core, core sizes and shell thicknesses markedly differ from what is suggested by the size increasing. We investigated very precisely the structure of nanoparticles in performing high resolution (scanning) TEM imaging and geometrical phase analysis (GPA). The chemical composition and spatial distribution of atoms were studied by electron energy loss spectroscopy (EELS) mapping and spectroscopy. The chemical environment and oxidation state of cations were investigated by 57Fe Mössbauer spectrometry, soft X-ray absorption spectroscopy (XAS) and X-ray magnetic circular dichroism (XMCD). The combination of these techniques allowed us to estimate the increase of Fe2+ content in the iron oxide core of the core@shell structure and the increase of the cobalt ferrite shell thickness in the core@shell@shell one, whereas the iron oxide shell appears to be much thinner than expected. Thus, the modification of the chemical composition as well as the size of the Fe3-dO4 core and the thickness of the cobalt ferrite shell have a high impact on the magnetic properties. Furthermore, the growth of the iron oxide shell also markedly modifies the magnetic properties of the core-shell nanoparticles, thus demonstrating the high potential of onion-like nanoparticles to accurately tune the magnetic properties of nanoparticles according to the desired applications. © 2021 American Chemical Society.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Accounting for preemption and migration costs in the calculation of hard real-time cyclic executives for MPSoCs

  • Rubio-Anguiano, L.
  • Briz, J. L.
  • Ramirez-Trevino, A.
This work introduces a methodology to consider preemption and migration overhead in hard real-time cyclic executives on multicore architectures. The approach performs two iterative stages. The first stage takes a cyclic executive, from which the number and timing of all preemptions and migrations for every task is known. Then, it includes this overhead by updating the worst-case execution time (WCET) of the tasks. The second stage calculates a new cyclic executive considering the new WCET of tasks. The stages iterate until the preemption and migration overhead keeps constant. © 2016 IEEE.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Twisted Ways to Find Plane Structures in Simple Drawings of Complete Graphs

  • Aichholzer, Oswin
  • García, Alfredo
  • Tejel, Javier
  • Vogtenhuber, Birgit
  • Weinberger, Alexandra
Simple drawings are drawings of graphs in which the edges are Jordan arcs and each pair of edges share at most one point (a proper crossing or a common endpoint). We introduce a special kind of simple drawings that we call generalized twisted drawings. A simple drawing is generalized twisted if there is a point O such that every ray emanating from O crosses every edge of the drawing at most once and there is a ray emanating from O which crosses every edge exactly once. Via this new class of simple drawings, we show that every simple drawing of the complete graph with n vertices contains Ω(n^{1/2}) pairwise disjoint edges and a plane path of length Ω((log n)/(log log n)). Both results improve over previously known best lower bounds. On the way we show several structural results about and properties of generalized twisted drawings. We further present different characterizations of generalized twisted drawings, which might be of independent interest.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Pyranylidene/trifluoromethylbenzoic acid-based chromophores for dye-sensitized solar cells

  • Royo Sánchez, R.
  • Domínguez Celorrio, A.
  • Franco Ontaneda, S.
  • Andreu Solano, R.
  • Orduna, J.
The synthesis and photovoltaic study of five dyes based on 4H-pyranylidene moiety as donor moiety is reported. A thiophene unit conjugated with/without an ethynyl bond acts as the p-relay and benzoic acid as the anchor group with/without a trifluoromethyl group. Their electrochemical and optical properties are analyzed by using a joint experimental and theoretical approach. The presence of the trifluoromethyl group leads to an enhancement of the molar extinction coefficient, being slightly when a hexyl chain is introduced in the thiophene ring, but does not modify the oxidation potential. For the preparation of derived solar cells an antiaggregant is essential in all cases. The photovoltaic performance is sensitive to the structural modification of the dye: the CF3 group and the hexyl chain of the thiophene spacer were shown to improve the efficiency. The lack of a triple bond in the p-spacer involves a lower photovoltaic efficiency, and the trifluoromethyl group leads to a lower dye-load, but a decrease of the recombination processes. These results are in accordance with the electrochemistry impedance spectroscopy studies carried out. Moreover, the organic dyes have been also tested with a fluorescent lamp (indoor conditions), leading to an increase of the efficiency, reaching a 36% for the best dye. © 2022 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Sulfonamide-derived Dithiocarbamate Gold(i) complexes induce the apoptosis of colon cancer cells by the activation of Caspase 3 and redox imbalance

  • Quero, Javier
  • Royo, José Carlos
  • Fodor, Beatrice
  • Gimeno, María Concepción
  • Osada, Jesús
  • Rodríguez Yoldi, María Jesús
  • Cerrada, Elena
Two new families of dithiocarbamate gold(I) complexes derived from benzenesulfonamide with phosphine or carbene as ancillary ligands have been synthesized and characterized. In the screening of their in vitro activity on human colon carcinoma cells (Caco-2), we found that the more lipophilic complexes—those with the phosphine PPh3—exhibited the highest anticancer activity whilst also displaying significant cancer cell selectivity. Au(S2CNHSO2C6H5)(PPh3)] (1) and Au(S2CNHSO2-p-Me-C6H4)(IMePropargyl)] (8) produce cell death, probably by intrinsic apoptosis (mitochondrial membrane potential modification) and caspase 3 activation, causing cell cycle arrest in the G1 phase with p53 activation. Besides this, both complexes might act as multi-target anticancer drugs, as they inhibit the activity of the enzymes thioredoxin reductase (TrxR) and carbonic anhydrase (CA IX) with the alteration of the redox balance, and show a pro-oxidant effect.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A comparative study between single gas and mixed gas permeation of polyether-block-amide type copolymer membranes

  • Martínez-Izquierdo, L.
  • Perea-Cachero, A.
  • Malankowska, M.
  • Téllez, C.
  • Coronas, J.
We analyze the gas separation performance of five polyether-block-amide type copolymers (Pebax® 1657, Renew®, 2533, 3533 and 4533). These codes are composed of different hard and rubbery segments with different proportions. Dense membranes were prepared by the casting-solution method and studied by elemental, thermogravimetric and X-ray diffraction analyses, FTIR-ATR spectroscopy and single and mixed gas permeation. Codes with the best separation performance are those of polyethylene oxide as the soft phase (Pebax® 1657 and Renew®) due to the more intense interactions of this segment with CO2, which increases the CO2/N2 solubility selectivity (17.5 and 30.5 for Pebax® 1657 and Renew®, respectively) and hence the CO2/N2 separation selectivity of the membrane (36 and 37 for Pebax® 1657 and Renew®, respectively, obtained from mixed gas permeation). It is also noticeable that the proportion of the soft phase in the copolymer determines the permeability of CO2. It was found that the codes with a greater soft/hard segment ratio (Pebax® 2533 and 3533) have also a greater permeability value (239 and 220 Barrer for Pebax® 2533 and 3533, respectively, measured by mixed gas permeation). Pebax® Renew® was the polymer with the best separation performance with CO2 permeabilities of 167 and 164 Barrer and CO2/N2 selectivities of 41 and 37, measured by single and mixed gas permeation, respectively. The comparison between the single and mixture gas permeation results revealed a relatively good correspondence between both for most of the Pebax® codes tuned by the solubility and diffusion properties of the polymers. © 2022 The Authors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Gold-catalyzed 1, 3-Thiazine formation and uncommon tautomer isolation

  • Canudo-Barreras, G.
  • Salvador, D.
  • Herrera, R. P.
  • Gimeno, M. C.
This work represents the first example of a gold-catalyzed formation of 1, 3-thiazine/1, 3-thiazinane by means of a catalytic approach and further uncommon isolation of the two tautomers. The developed protocol gives rise to a broad scope of 1, 3-thiazine derivatives with excellent yields in short reaction times. Interestingly, different isomers could be obtained depending on the state of the compound, and in the crystal state the 1, 3-thiazinane isomer is obtained, while in solution the 1, 3-thiazine is the unique isomer. This work represents an interesting approach for the synthesis of potential biologically relevant molecules and a crucial precedent in tautomerism isolation and characterization. © 2022 American Chemical Society. All rights reserved.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tunable Emissive Ir(III) Benzimidazole-quinoline Hybrids as Promising Theranostic Lead Compounds

  • Redrado, Marta
  • Miñana, Miriam
  • Coogan, Michael P.
  • Gimeno, M. Concepción
  • Fernández Moreira, Vanesa
Bioactive and luminescent cyclometallated Ir(III) complexes Ir(ppy)2L1]Cl (1) and Ir(ppy)2L2]Cl (2) containing a benzimidazole derivative (L1/L2) as auxiliary mimic of a nucleotide have been synthesised. The emissive properties of both complexes are conditioned by the nature of L1 and L2, rendering an orange and a green emitter respectively. Both are highly emissive with quantum yield increasing in absence of oxygen up to 0.26 (1) and 0.36 (2), suggesting their phosphorescent character. Antiproliferative activity against lung cancer A549 cells increased up to 15 times upon irradiation conditions, reaching IC50 values in the nanomolar range (0.3±0.09 µM (1) and 0.26±0.14 µM (2)) and pointing them as good PSs candidates for photodynamic therapy via 1O2 generation. Cellular biodistribution analysis by fluorescence microscopy suggest the lysosomes as the preferential accumulation organelle. Time-resolved studies showed a greatly increased cellular emission lifetime compared to the solution values, indicating binding to macromolecules or cellular structures and restriction of collision and vibrational quenching.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High performance LATP thin film electrolytes for all-solid-state microbattery applications

  • Siller V.
  • Morata A.
  • Eroles M.N.
  • Arenal R.
  • Gonzalez-Rosillo J.C.
  • López Del Amo J.M.
  • Tarancón A.
The NASICON superionic solid electrolyte Li1+xAlxTi2-x(PO4)3 (LATP) with 0.3 = x = 0.5 remains one of the most promising solid electrolytes thanks to its good ionic conductivity and outstanding stability in ambient air. Despite the intensive research for bulk systems, there are only very few studies of LATP in a thin film form (thickness < 1 µm) and its implementation in all-solid-state batteries and microbatteries. The following study fills this gap by exploring the properties of high performance LATP thin films fabricated by large-area Pulsed Laser Deposition (PLD). The as-deposited thin films exhibit an ionic conductivity of around 0.5 µS cm-1 at room temperature (comparable to the state-of-the-art of LiPON) which increases to a remarkably high value of 0.1 mS cm-1 after an additional annealing at 800 °C. A possible cause for this significant enhancement in ionic conductivity by two orders of magnitude is the formation of a glassy, intergranular phase. The performance of both as-deposited and annealed LATP films makes them suitable as solid electrolytes, which opens the path to a new family of stable and high performance all-solid-state thin film batteries. This journal is © The Royal Society of Chemistry.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Highly stable Pebax® Renew® thin-film nanocomposite membranes with metal organic framework ZIF-94 and ionic liquid [Bmim][BF4] for CO2 capture

  • Martínez-Izquierdo, Lidia
  • Téllez, Carlos
  • Coronas, Joaquín
Ionic liquid [Bmim][BF4] and metal organic framework ZIF-8 and ZIF-94 nanoparticles were incorporated into polymer Pebax® Renew® 30R51 to obtain highly efficient thin-film nanocomposite membranes, ca. 300 nm thick.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Synthesis of Dipyridylaminoperylenediimide–Metal Complexes and Their Cytotoxicity Studies

  • Garcés-Garcés, José
  • Redrado, Marta
  • Sastre-Santos, Ángela
  • Gimeno, María Concepción
  • Fernández-Lázaro, Fernando
A new family of perylenediimide (PDI) silver and copper complexes has been successfully synthesized by reacting ortho- and bay-substituted (dipyrid-2′,2″-ylamino)perylenediimide ligands with metal phosphine fragments. The coordination of the metal center did not reveal a significant effect on the photophysical properties, which are mainly due to the PDI ligands, and in some cases quenching of the luminescence was observed. The antiproliferative effect of the free perylenediimide ligands and the metalloPDI complexes against the cervix cancer cell line HeLa was determined by MTT assay. The free perylenediimide ligands exhibited a moderate cytotoxic activity, but the coordination of silver or copper to the dypyridylamino fragment greatly enhanced the activity, suggesting a synergistic effect between the two fragments. In attempts to elucidate the cellular biodistribution of the PDIs and the complexes, a colocalization experiment using specific dyes for the lysosomes or mitochondria as internal standards revealed a major internalization inside the cell for the metal complexes, as well as a partial mitochondrial localization.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Wide-band compact 1.8 V-0.18 µm CMOS analog front-end for impedance spectroscopy

  • Perez-Bailon, J.
  • Sanz-Pascual, M. T.
  • Calvo, B.
  • Medrano, N.
In this letter, a fully integrated configurable front-end for Impedance Spectroscopy (IS) is presented. The circuit includes fully differential in-phase and quadrature channels, using a transconductor (TC)-transimpedance (TI) approach. The input TC, shared for both channels, is based on a programmable degenerated differential pair to attain low-noise programmable-gain, while identical TII/Q with embedded synchronous rectification provide both I, Q outputs, filtered through fc adjustable Gm-C integrators. It exhibits a programmable gain ranging from 0 dB to 40 dB with 87 MHz bandwidth, amplitude and phase recovery errors below 1.9% and 2.5&#x2218; respectively and an input referred noise floor of 16.7 nV/Hz. The result is a high-performance very compact topology with a total power consumption of 292 &#x03BC;W at a 1.8 V power supply, thus constituting an appropriate solution for full on chip multichannel IS systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Bayesian neural networks to analyze hyperspectral datasets using uncertainty metrics

  • Alcolea, Adrián
  • Resano, Javier
Machine learning techniques, and specifically neural networks, have proved to be very useful tools for image classification tasks. Nevertheless, measuring the reliability of these networks and calibrating them accurately are very complex. This is even more complex in a field like hyperspectral imaging, where labeled data are scarce and difficult to generate. Bayesian neural networks (BNNs) allow to obtain uncertainty metrics related to the data processed (aleatoric), and to the uncertainty generated by the model selected (epistemic). On this work, we will demonstrate the utility of BNNs by analyzing the uncertainty metrics obtained by a BNN over five of the most used hyperspectral images datasets. In addition, we will illustrate how these metrics can be used for several practical applications such as identifying predictions that do not reach the required level of accuracy, detecting mislabeling in the dataset, or identifying when the predictions are affected by the increase of the level of noise in the input data.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Double-Layered Pebax® 3533/ZIF-8 Membranes with Single-Walled Carbon Nanotube Buckypapers as Support for Gas Separation

  • Berned-Samatán, Víctor
  • Téllez, Carlos
  • Coronas, Joaquín
Single-walled carbon nanotube buckypapers (SWCNT-bps) coated with a metal–organic framework ZIF-8 layer were used as supports for the preparation of Pebax® 3533 TFC membranes by both phase inversion and spin coating techniques. Upon proper characterization of the materials by X-ray diffraction, IR spectroscopy, thermogravimetry and electron microscopy, the obtained membranes were tested in gas separation experiments with a 15:85 CO2/N2 mixture. These experiments proved that the ZIF-8 layer prevented from the penetration of the polymer selective film into the SWCNT-bp support, giving rise to a highly permeable selective membrane. The optimum membrane was achieved by the spin-coating method, with better permeation results than that prepared by the phase inversion method, obtaining a CO2 permeance of 566 GPU together with a CO2/N2 selectivity of 20.9.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Improving the configuration of the predictable ACDC data cache for real-time systems

  • Segarra, J.
  • Marti-Campoy, A.
In real-time systems, analyzing the worst-case execution time (WCET) of a task in the presence of data caches is hard. The ACDC is a data cache that provides predictability, facilitating WCET analysis. It works by granting data cache replacement permission to specific load/store instructions. Nonetheless, knowing how to select these instructions to minimize the WCET, i.e., configuring the ACDC, is not trivial. In this paper, we propose four new methods to configure the ACDC, and compare them with existing methods. Unlike those in previous studies, our proposed methods provide specific ACDC configurations for the different phases of a given task, instead of a single ACDC configuration per task. We evaluate the WCET bounds obtained when using different ACDC configuration methods on the TACLeBench benchmark suite. Our results show that the most complex benchmarks work better with multiple-content configurations, which indicates that realistic tasks may also benefit from this kind of configuration. The methods proposed in this study improve the WCET in more than 60% of cases, with an average WCET improvement of nearly 5% and up to 50% in some cases.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Nanofiltration with polyamide thin film composite membrane with ZIF-93/SWCNT intermediate layers on polyimide support

  • Berned-Samatán, Victor
  • Piantek, Marten
  • Coronas, Joaquín
  • Téllez, Carlos
Among current separation processes, nanofiltration (NF), besides its easy scalability, exhibits low energy consumption, environmental impact and footprint, being widely used for water treatment and solvent recovery. The development of membranes for NF involves perfecting the skin selective layer, the sublayers and the support. In this work, a multilayer structure membrane is presented where a selective layer of polyamide (PA, thickness 40–60 nm) was interfacially polymerized on a sub-layer of MOF ZIF-93 (thickness ∼ 50 nm) grown on another sub-layer of single-walled carbon nanotubes (SWCNT, thickness ∼ 400 nm) vacuum filtrated on an asymmetric polyimide P84® support (thickness ∼ 200 μm). The membrane with structure PA/ZIF-93/SWCNT/P84 showed excellent results in water NF and methanol organic solvent NF of different dyes (with the highest values of water and methanol permeances of up to 57.6 and 84.5 L·m−2·h−1·bar−1, respectively, with rejections usually greater than 99%). By means of a wide range of characterization techniques (contact angle, AFM, XRD, ATR-FTIR and FIB-SEM) the role of every component in the membrane was elucidated. In fact, the presence of the sublayer of ZIF-93 increased the roughness and hydrophilicity as well as decreased the thickness of the PA layer. These effects are related to the fact that the sublayers subordinate the interfacial polymerization as well as influence the properties of the PA film and therefore its NF performance, even showing chlorine resistance as well as ten-day cross-flow NF stability.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Stability of a pyrimidine-based dye-sensitized TiO2 photoanode in sacrificial electrolytes

  • Ansón-Casaos, A.
  • Martínez-Barón, C.
  • Angoy-Benabarre, S.
  • Hernández-Ferrer, J.
  • Benito, A.M.
  • Maser, W.K.
  • Blesa, M.J.
Dye sensitization of semiconductor metal oxides aims to extend the light absorption range into the visible region, of particular interest for their use as photoanodes in photoelectrochemical (PEC) water splitting. Organic dyes, however, suffer from limited chemical stability when they are exposed to constant potential and irradiation in aqueous media. Thus, in this work, we evaluate a novel metal-free donor-π-acceptor (D-π-A) dye (AT-Pyri), demonstrating significant sensitization of film photoanodes based on TiO2 nanoparticles. Among a series of tested sacrificial agents, the addition of triethanolamine (TEOA) to the sodium sulphate electrolyte prevents the degradation of AT-Pyri even after several hours of operation. Combining two sacrificial agents (methanol and TEOA) results in a synergetic improvement of the PEC water-splitting activity. Notably, the stabilization of the AT-Pyri photoanode is accompanied by a substantial increase in the photocurrent over the reference TiO2 photoanode, while the associated spikes in transient photocurrent measurements disappear.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Fast synthesis of zeolitic imidazolate framework ZIF-94 using NaOH and recycling reagents

  • Paseta, Lorena
  • Malankowska, Magdalena
  • Téllez, Carlos
  • Coronas, Joaquín
ZIF-94 is a zeolitic imidazolate framework with the same SOD type topology than ZIF-8 but with an aldehyde group functionalized organic ligand. This turns ZIF-94 less thermally stable than ZIF-8 but with interesting properties of water and carbon dioxide adsorption, making the former a material highly suitable for carbon capture technologies. In this work, an alternative procedure for the synthesis of ZIF-94 was developed based on the use of NaOH as deprotonator. Besides, the crystallization was carried out in a very short time (1–20 min) at room temperature while centrifuging at 10,000 rpm. This made possible the simultaneous crystallization and separation of the product material giving rise, together with the use of the inorganic deprotonator, to a very efficient process with crystallization yields higher than 65%. For the best conditions tested (crystallization-centrifugation time of 5 min), 66 ± 24 nm in particle size, highly crystalline ZIF-94 with 485 m2 g−1 of specific surface area was obtained at a crystallization yield of 66.9%. Similar properties were obtained for ZIF-94 when prepared from recycled reagents (solvent, ligand and Zn salt).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Balancer: bandwidth allocation and cache partitioning for multicore processors

  • Navarro-Torres, Agustín
  • Alastruey-Benedé, Jesús
  • Ibáñez, Pablo
  • Viñals-Yúfera, Víctor
The management of shared resources in multicore processors is an open problem due to the continuous evolution of these systems. The trend toward increasing the number of cores and organizing them in clusters sets out new challenges not considered in previous works. In this paper, we characterize the use of the shared cache and memory bandwidth of an AMD Rome processor executing multiprogrammed workloads and propose several mechanisms that control the use of these resources to improve the system performance and fairness. Our control mechanisms require no hardware or operating system modifications. We evaluate Balancer on a real system running SPEC CPU2006 and CPU2017 applications. Balancer tuned for performance shows an average increase of 7.1% in system performance and an unfairness reduction of 18.6% with respect to a system without any control mechanism. Balancer tuned for fairness decreases the performance by 1.3% in exchange for a 64.5% reduction of unfairness.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Accurate and efficient constrained molecular dynamics of polymers using Newton's method and special purpose code

  • López-Villellas, L.
  • Kjelgaard Mikkelsen C. Ch.
  • Galano-Frutos, J. J.
  • Marco-Sola, S.
  • Alastruey-Benedé, J.
  • Ibáñez, P.
  • Moretó, M.
  • Sancho, J.
  • García-Risueño, P.
In molecular dynamics simulations we can often increase the time step by imposing constraints on bond lengths and bond angles. This allows us to extend the length of the time interval and therefore the range of physical phenomena that we can afford to simulate. We examine the existing algorithms and software for solving nonlinear constraint equations in parallel and we explain why it is necessary to advance the state-of-the-art. We present ILVES-PC, a new algorithm for imposing bond constraints on proteins accurately and efficiently. It solves the same system of differential algebraic equations as the celebrated SHAKE algorithm, but ILVES-PC solves the nonlinear constraint equations using Newton’s method rather than the nonlinear Gauss-Seidel method. Moreover, ILVES-PC solves the necessary linear systems using a specialized linear solver that exploits the structure of the protein. ILVES-PC can rapidly solve constraint equations as accurately as the hardware will allow. The run-time of ILVES-PC is proportional to the number of constraints. We have integrated ILVES-PC into GROMACS and simulated proteins of different sizes. Compared with SHAKE, we have achieved speedups of up to 4.9× in single-threaded executions and up to 76× in shared-memory multi-threaded executions. Moreover, ILVES-PC is more accurate than P-LINCS algorithm. Our work is a proof-of-concept of the utility of software designed specifically for the simulation of polymers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Multiple myeloma cell simulation using an agent-based framework coupled with a continuous fluid model

  • Urdeitx, Pau
  • Clara-Trujillo, Sandra
  • Gomez Ribelles, Jose Luis
  • Doweidar, Mohamed H.
Bone marrow mechanical conditions play a key role in multiple myeloma cancer. The complex mechanical and chemical conditions, as well as the interactions with other resident cells, hinder the development of effective treatments. Agent-based computational models, capable of defining the specific conditions for every single cell, can be a useful tool to identify the specific tumor microenvironment. In this sense, we have developed a novel hybrid 3D agent-based model with coupled fluid and particle dynamics to study multiple myeloma cells’ growth. The model, which considers cell–cell interactions, cell maturation, and cell proliferation, has been implemented by employing user-defined functions in the commercial software Fluent. To validate and calibrate the model, cell sedimentation velocity and cell proliferation rates have been compared with in vitro results, as well as with another previously in-house developed model. The results show that cell proliferation increased as cell–cell, and cell–extracellular matrix interactions increased, as a result of the reduction n maturation time. Cells in contact form cell aggregates, increasing cell–cell interactions and thus cell proliferation. Saturation in cell proliferation was observed when cell aggregates increased in size and the lack of space inhibited internal cells’ proliferation. Compared with the previous model, a huge reduction in computational costs was obtained, allowing for an increase in the number of simulated cells.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Porting and optimizing BWA-MEM2 using the Fujitsu A64FX processor

  • Langarita, Rubén
  • Armejach, Adrià
  • Ibáñez, Pablo
  • Alastruey-Benedé, Jesús
  • Moretó, Miquel
Sequence alignment pipelines for human genomes are an emerging workload that will dominate in the precision medicine field. BWA-MEM2 is a tool widely used in the scientific community to perform read mapping studies. In this paper, we port BWA-MEM2 to the AArch64 architecture using the ARMv8-A specification, and we compare the resulting version against an Intel Skylake system both in performance and in energy-to-solution. The porting effort entails numerous code modifications, since BWA-MEM2 implements certain kernels using x86 64 specific intrinsics, e.g., AVX-512. To adapt this code we use the recently introduced Arm’s Scalable Vector Extensions (SVE). More specifically, we use Fujitsu’s A64FX processor, the first to implement SVE. The A64FX powers the Fugaku Supercomputer that led the Top500 ranking from June 2020 to November 2021. After porting BWA-MEM2 we define and implement a number of optimizations to improve performance in the A64FX target architecture. We show that while the A64FX performance is lower than that of the Skylake system, A64FX delivers 11.6% better energy-to-solution on average. All the code used for this article is available at https://gitlab.bsc.es/rlangari/bwa-a64fx.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Synthesis of Bis(amino acids) containing the Styryl-cyclobutane Core by Photosensitized [2+2]-Cross-cycloaddition of Allylidene-5(4H)-oxazolones

  • Sierra, S.
  • Dalmau, D.
  • Alegre-Requena, J. V.
  • Pop, A.
  • Silvestru, C.
  • Marín, M. L.
  • Boscá, F.
  • Urriolabeitia, E. P.
The irradiation of 2-aryl-4-(E-3′-aryl-allylidene)-5(4H)-oxazolones 1 with blue light (456 nm) in the presence of [Ru(bpy)3](BF4)2 (bpy = 2,2′-bipyridine, 5% mol) gives the unstable cyclobutane-bis(oxazolones) 2 by [2+2]-photocycloaddition of two oxazolones 1. Each oxazolone contributes to the formation of 2 with a different C=C bond, one of them reacting through the exocyclic C=C bond, while the other does so through the styryl group. Treatment of unstable cyclobutanes 2 with NaOMe/MeOH produces the oxazolone ring opening reaction, affording stable styryl-cyclobutane bis(amino acids) 3. The reaction starts with formation of the T1 excited state of the photosensitizer 3[Ru*(bpy)3]2+, which reacts with S0 of oxazolones 1 through energy transfer to give the oxazolone T1 state 3(oxa*)-1, which is the reactive species and was characterized by transient absorption spectroscopy. Measurement of the half-life of 3(oxa*)-1 for 1a, 1b and 1d shows large values for 1a and 1b (10–12 μs), while that of 1d is shorter (726 ns). Density functional theory (DFT) modeling displays strong structural differences in the T1 states of the three oxazolones. Moreover, study of the spin density of T1 state 3(oxa*)-1 provides clues to understanding the different reactivity of 4-allylidene-oxazolones described here with respect to the previously reported 4-arylidene-oxazolones.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Green and fast strategies for energy-efficient preparation of the covalent organic framework TpPa-1

  • Martínez-Visus, Íñigo
  • Ulcuango, Matías
  • Zornoza, Beatriz
  • Coronas, Joaquín
  • Téllez, Carlos
Three synthesis procedures for the covalent-organic framework (COF) TpPa-1 are studied with the purpose of setting up the most promising one in a fast and green way, leading to a more environmentally friendly and sustainable process. With conventional heating, good crystallinity and a high BET specific surface area (SSA) of up to 1007 m2 ⋅ g−1 are achieved at 170 °C for 3 days using water as the quintessential green solvent. However, the application of microwave radiation in the synthesis for this crystalline porous polymer allows reaction times to be shortened to 30 min while maintaining structural and textural properties (BET SSA of 928 m2 ⋅ g−1) and obtaining yields close to 98 % (vs. 90 % in the hydrothermal synthesis). The water-assisted mechanochemical synthesis is also an environmentally friendly synthetic approach; with heating at 170 °C in a two-step process (10+10 min), high crystallinity is achieved, a BET SSA of 960  m2 ⋅ g−1 and a yield of 98 % for TpPa-1.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The effect of sintering temperature on the properties of the BiOCl films for potential application in DSSC

  • Pizarro-Castillo, L.
  • Mera, Adriana C.
  • Cabello-Guzmán, G.
  • Bernal, C.
  • Bizarro, M.
  • Carrasco, C.
  • Blesa, María-Jesús
  • Rodríguez, C.A.
In this work, BiOCl films were obtained by tape casting using BiOCl powders synthesized by the co-precipitation method. The effect of the film's sintering temperature (300 °C–600 °C) on the morphology, chemical composition, crystalline phases and optical characteristics was studied. The obtained BiOCl powders showed a flake-like morphology, a tetragonal crystalline structure without secondary phases and a wide band gap of 3.53 eV. For BiOCl films, results indicated that as the sintering temperature increased the flake-like shaped particles changed to rectangular ones while the amount of chlorine in the films decreased. A phase transition from tetragonal BiOCl to monoclinic Bi24O31Cl10 was also observed as the sintering temperature increased. Consequently, optical studies revealed that the band gap of BiOCl films decreased from 3.03 eV to 2.82 eV. FTIR analysis demonstrated that the organic groups were removed from the films only for sintering temperatures above 400 °C. The Rhodamine B dye adsorption capacity of BiOCl films decreased with increasing sintering temperature. The results obtained allow us to conclude that BiOCl films are suitable for use in DSSC when the sintering temperature is in the range of 400–500 °C.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Core–shell Fe3O4@CoFe2O4 nanoparticles as high-performance anode catalysts for enhanced oxygen evolution reaction

  • Royer, Lisa
  • Makarchuk, Iryna
  • Hettler, Simon
  • Arenal, Raúl
  • Asset, Tristan
  • Rotonnelli, Benjamin
  • Bonnefont, Antoine
  • Savinova, Elena
  • Pichon, Benoit P.
Water electrolysis is a promising and environmentally friendly means for renewable energy storage. Recent progress in the development of anion exchange membranes (AEMs) has provided new perspectives for high-performance anode catalysts based on transition metal oxides (TMOs) for the sluggish anodic oxygen evolution reaction (OER). Here, we report on core–shell nanoparticles (Fe3O4@CoFe2O4) which allow combining an electrocatalytic shell (CoFe2O4) with a conductive core (Fe3O4). Such an original approach significantly minimizes critical Co content in the catalyst and avoids addition of unstable conductive carbon black. The core–shell nanoparticles outperform Co(1−x)Fe(2+x)O4 nanoparticles and show an exceptional OER activity per Co unit mass (2800 A gcobalt−1 at 1.65 V vs. RHE) suggesting synergistic interaction between the core and the shell. Along with the core–shell structure, the size of the Fe3O4 core is a critical parameter, with a large conductive Fe3O4 core being beneficial for OER enhancement.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Highly Efficient Photoninitiators Based on 4H-Pyranylidene Derivatives for Two-Photon Laser Printing

  • Royo, Raquel
  • Mainik, Philipp
  • Benitez-Martin, Carlos
  • Andreu, Raquel
  • Blasco, Eva
  • Najera, Francisco
  • Villacampa, Belén
A series of four donor–acceptor–donor derivatives bearing 4H-pyranylidene and 4-methylcyclohexan-1-one units as donor and acceptor groups respectively is designed, synthesized, and photophysically characterized. Both experimental and theoretical studies reveal good two-photon absorption (2PA) properties for these systems. Decoration of the exocyclic position of the 4H-pyranylidene moiety with a thiophene ring results in high 2PA cross-section values (σ2PA) ≈700 nm, and remarkably, in the region between 900 and 1000 nm. Furthermore, all chromophores are evaluated as photoinitiators (PIs) for two-photon-laser printing at 780 nm, showing superior performance compared to the commonly used commercially available PI, phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide. Among the studied PIs, the ones equipped with a thiophene unit at the exocyclic position of the 4H-pyranylidene moiety exhibit the highest efficiency, enabling fast printing using low laser powers with even lower concentrations of PI. Overall, this study shows the great potential of this new class of PIs for application in the field of 3D nanoprinting.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Novel spiro-core dopant-free hole transporting material for planar inverted Perovskite solar cells

  • Royo, Raquel
  • Sánchez, José G.
  • Li, Wenhui
  • Martinez-Ferrero, Eugenia
  • Palomares, Emilio
  • Andreu, Raquel
  • Franco, Santiago
Hole-transporting materials (HTMs) have demonstrated their crucial role in promoting charge extraction, interface recombination, and device stability in perovskite solar cells (PSCs). Herein, we present the synthesis of a novel dopant-free spiro-type fluorine core-based HTM with four ethoxytriisopropylsilane groups (Syl-SC) for inverted planar perovskite solar cells (iPSCs). The thickness of the Syl-SC influences the performance of iPSCs. The best-performing iPSC is achieved with a 0.8 mg/mL Syl-SC solution (ca. 15 nm thick) and exhibits a power conversion efficiency (PCE) of 15.77%, with Jsc = 20.00 mA/cm2, Voc = 1.006 V, and FF = 80.10%. As compared to devices based on PEDOT:PSS, the iPSCs based on Syl-SC exhibit a higher Voc, leading to a higher PCE. Additionally, it has been found that Syl-SC can more effectively suppress charge interfacial recombination in comparison to PEDOT:PSS, which results in an improvement in fill factor. Therefore, Syl-SC, a facilely processed and efficient hole-transporting material, presents a promising cost-effective alternative for inverted perovskite solar cells.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Didactic analysis of curricular materials by future teachers

  • Cotrado, Bethzabe
  • Burgos, María
  • Beltrán-Pellicer, Pablo
  • Castro, Alfredo
The design and implementation of a training experience with future Peruvian mathematics teachers is described, aimed at developing the competence of analyzing the didactic suitability of curricular materials on probability. From a qualitative approach and with the support of the guidelines of didactic engineering based on the Ontosemiotic Approach, the protocols of written responses of 38 participants are available. The results show limitations in the assessment of suitability indicators and difficulties to elaborate a reasoned judgment on it. It is concluded that there is a need to promote reflective practice on the use of curricular materials and proposals for improvement changes in all facets of didactic suitability in a joint manner.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Microfluidic preparation of thin film composite hollow fiber membrane modules for water nanofiltration: Up-scaling, reproducibility and MOF based layers

  • Esteras-Saz, Javier
  • Paseta, Lorena
  • Echaide-Górriz, Carlos
  • Malankowska, Magdalena
  • Luque-Alled, José M.
  • Zornoza, Beatriz
  • Téllez, Carlos
  • Coronas, Joaquín
Background The commercialization of thin film composite (TFC) hollow fiber (HF) membranes remains challenging owing to issues associated with membrane manufacturing. Methods TFC membranes were synthesized by microfluidic interfacial polymerization of polyamide (PA) on polysulfone hollow fiber (HF) membrane modules. A total of 33 HF membrane modules were prepared with different number of HFs (from 1 to 25) and different lengths (from 10 to 50 cm). They were evaluated in a nanofiltration operation in terms of water permeance and rose Bengal (RB) and MgSO4 rejections. Significant findings Among the 33 modules, 73% showed RB rejections higher than 95%, while 36% of the modules reached rejections above 99%. During the membrane synthesis, different parameters, such as PA monomer concentration, residence time and reaction time, were studied. As a result, the amount of monomer was reduced by ca. 80%. The versatility of microfluidics allowed incorporating hydrophilic metal-organic framework (MOF) ZIF-93 to produce HF modules with PA/MOF bilayered membranes (a continuous layer of MOF between the support and the PA film) which led to an important enhancement of the water permeance from 1.3 (bare PA membrane) to 5.3 L·m−2·h−1·bar−1 (PA/ZIF-93 HF membrane), maintaining RB rejection above 95%.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Organic solvent-free fabrication of thin film polyamide/zeolitic imidazolate framework membranes for removal of dyes from water

  • Luque-Alled, José Miguel
  • Martínez-Izquierdo, Lidia
  • Gorgojo, Patricia
  • Téllez, Carlos
  • Coronas, Joaquín
Thin film composite (TFC) polyamide (PA) membranes in combination with zeolitic imidazolate frameworks (ZIF), such as ZIF-8 and ZIF-93, have been fabricated using a novel approach based on vapor phase interfacial polymerization (VIP). These membranes have been investigated for nanofiltration (NF) of aqueous solutions of organic dyes, such as Rose Bengal (RB, 1017 Da), Sunset Yellow (SY, 452 Da) and Acridine Orange (AO, 265 Da). The preparation of the PA layer by VIP technique avoids the use of any organic solvent that is typically required in the conventional PA synthesis. Both ZIF-8 and ZIF-93 were initially synthesized using conventional procedures (methanol-based route) and incorporated to the PA layer in two different configurations: i) thin film nanocomposite with ZIF embedded within the PA film, and ii) bilayer membranes with a layer of ZIF between the support and the PA layer. The synthesis of ZIF-93 using a water-based route was developed for the bilayer configuration allowing for an organic solvent-free fabrication of PA/ZIF-93 bilayer VIP-TFC. These membranes showed the highest water permeances of 2.6, 3.4 and 2.2 L m-2h−1 bar−1 for RB, SY and AO, respectively. As compared to the control membrane VIP-TFC, this represents permeance increases of 69–117% and maintains high (greater than 99%) rejection of all the organic dyes. Membrane characterization demonstrated that the permeance enhancement for bilayer PA/ZIF-93 VIP-TFCs is related to an improved hydrophilicity, higher surface roughness and thinner selective layers. The prepared membranes demonstrated excellent cycle stability, maintaining their initial water permeance and dye rejection throughout 34 h of long-term operation, and being able to operate across the entire pH range studied (pH 3 to 9) without any detrimental effects on performance.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Poly(ether-block-amide) copolymer membranes in CO2 separation applications

  • Embaye, Alula Selomon
  • Martinez-Izquierdo, Lidia
  • Malankowska, Magdalena
  • Tellez, Carlos
  • Coronas, Joaqui´n
Poly(ether-block-amide) (PEBA, commercialized as Pebax) copolymer membranes show a highly promising platform for preparing high-performance membranes for CO2 capture from process streams containing CH4 and N2. Pebax combines high CO2 affinity with the desired mechanical strength for polymeric membranes thanks to its flexible polyether segment and hard polyamide block, respectively. Furthermore, researchers have been improving the performance of these membranes by preparing a thin Pebax selective layer on top of porous supports and by incorporating inorganic and organic nanofillers into the Pebax matrix to overcome the permeance-selectivity limit. The chemical and structural characteristics of Pebax membranes according to the different fabrication techniques and parameters are discussed first. Then, the recent developments in terms of both Pebax-based thin film composite and mixed matrix membranes are summarized. Finally, thermal and water stabilities of these membranes are addressed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Twitter y desarrollo profesional del futuro profesorado de matemáticas: percepciones de uso e intereses

  • Beltrán-Pellicer, Pablo
  • Martínez-Juste, Sergio
  • Muñoz-Escolano, José María
Diversos estudios señalan a Twitter como una red social interesante en el ámbito educativo. Numerosos usuarios comparten contenido, como recursos o actividades de aula, al mismo tiempo que se debate en torno a diversos temas. Así mismo, algunos autores sugieren que Twitter contribuye a la creación y desarrollo de comunidades de aprendizaje que repercuten positivamente en el desarrollo profesional del profesorado. Este artículo se plantea como objetivo explorar las percepciones de futuros profesores de matemáticas acerca del uso de Twitter como herramienta formativa. Para ello, se realiza una investigación con una muestra de 35 estudiantes de Máster de Profesorado de Educación Secundaria y Bachillerato de la especialidad de matemáticas. En primer lugar, se identifica mediante un cuestionario hasta qué punto los estudiantes son usuarios de esta red y, si lo hacen, con qué propósito. Posteriormente, se analizan los informes escritos elaborados por los estudiantes cuando se les solicita que describan dos hilos sobre un tema específico (probabilidad) y que analicen de forma argumentada su utilidad formativa. Finalmente, los participantes deben indicar qué cuentas consideran relevantes para su formación y por qué. Los resultados revelan que los participantes distinguen la diferente naturaleza de los hilos propuestos, pero prácticamente se limitan a mencionar aspectos epistémicos, cuando la diferencia radica en que un hilo versa sobre otras facetas del conocimiento didáctico-matemático. Además, observamos que siguen cuentas relacionadas con la materia, aduciendo motivos relacionados con la obtención de recursos educativos en torno a temas de divulgación matemática, conocimiento matemático escolar y del conocimiento didáctico-matemático.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Modelling TiO2 photoanodes for PEC water splitting: Decoupling the influence of intrinsic material properties and film thickness

  • Ansón-Casaos, A.
  • Ciria, J.C.
  • Martínez Barón, C.
  • Villacampa, B.
  • Benito, A.M.
  • Maser, W.K.
Semiconductor metal oxides are intensively studied in electrodes for photoelectrochemical (PEC) water splitting. On a series of nanoparticulate TiO2 photoanodes, we analyze specific fabrication variables by means of data fitting. First, the experimental outcome is gathered using PEC characterization techniques, mostly cyclic voltammetry and transient photocurrent measurements. Subsequently, we apply models to gain insights into the involved charge trapping and transfer phenomena. We find that capacitance coefficients and the switch-on transient kinetics depend on the TiO2 layer thickness, respectively indicating surface mechanisms and stationary regimes that are mediated by light accessibility. On the contrary, exponential factors of capacitance are independent of thickness, but reflect changes in the density of electron states with different sintering atmospheres. Also, the transfer resistance in the electrolyte side is indirectly influenced by sintering. Through meticulous quantitative analysis of trends, we stablish simple mathematical relationships that connect thickness-dependent parameters. This knowledge delves into fundamental mechanisms governing the TiO2 photoelectrode behaviour, and aims to facilitate further improvements in the efficiency of materials and electrodes for green hydrogen production.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Contribución de congreso (ConferenceOutput)

PeRISCVcope: a tiny teaching-oriented RISC-V interpreter

  • Suárez Gracia, D.
  • Valero, A.
  • Gran Tejero, R.
  • Villarroya, M.
  • Viñals, V.
The fast advances of computer systems translate into a growing demand of methodologies and tools to introduce those novelties into classes. Among the plethora of those advances, virtualization has become an essential technology in almost every relevant system stack, from connected cars to hyperscaled cloud servers. However, introducing those technologies into the classroom remains a challenging task because of the huge complexity of their software components that may hinder the learning process of students. peRISCVcope aims to help in this area by proposing a tiny yet powerful interpreter to dig into virtualization technologies, such as the implementation of trap&emulate hypervisors. With less than 2,000 lines of code, and thanks to the conciseness of the RV32I base instruction set of RISC-V, peRISCVcope enables students to make virtualization knowledge their own. This paper presents our experiences developing and testing a virtualization laboratory where students implement parts of an interpreter. After the practical experience, peRISCVcope has been proved as a useful pedagogical tool, and, most importantly, students have positively rated the experience.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Three-Stage CMOS LDO with Optimized Power and Dynamic Performance for Portable Devices

  • Serrano-Reyes, Andrés
  • Sanz-Pascual, María Teresa
  • Calvo-López, Belén
Low dropout (LDO) regulators are crucial components in power management systems for portable, i.e., battery-powered, devices. However, the design of LDO regulators presents a challenging trade-off between dynamic performance, power consumption, and area efficiency. This paper proposes a novel LDO regulator design that addresses these challenges by employing the reverse nested Miller compensation (RNMC) with current buffers embedded within the own class AB high gain error amplifier (EA) topology, and a time response enhancement circuit (TREC). High-gain (>120 dB) class AB EA renders good regulation performance with enhanced dynamic performance. The proposed compensation scheme improves the gain bandwidth product (GBW) and stability of the regulator, while the TREC reduces overshoot and undershoot during load transients without additional steady-state power consumption. Post-layout simulations confirm the robustness of the proposed 180 nm CMOS design across a wide range of operating conditions, achieving a regulated output voltage of 1.8 V with 100 mV dropout, good load and line regulating performance, and excellent load transient response with reduced undershoot and overshoot at minimum power (Iq = 13.8 μA) and area (314 μm × 150 μm) consumption. The proposed LDO regulator thus offers a compelling compromise between power consumption, area efficiency, and dynamic performance, making it highly suitable for portable applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Reevaluating Near-Infrared Reflectance as a Tool for the Study of Plant Water Status in Holm Oak (Quercus ilex subsp. rotundifolia)

  • Peguero-Pina, José Javier
  • Sancho-Knapik, Domingo
  • Ferrio, Juan Pedro
  • López-Ballesteros, Ana
  • Ruiz-Llata, Marta
  • Gil-Pelegrín, Eustaquio
Plant water status can be assessed through leaf spectral reflectance in the near-infrared (NIR), the “water bands”, considering indices that include the reflectance at a band absorbed by water over and another one as reference. We have assessed i/ the accuracy of reflectance at 1450, 1599 and 1940 nm without reference bands and ii/ the potential use of leaf water content index (LWCI) for the estimation of plant water status in holm oak, the main host plant for black truffle cultivation. We demonstrated that contact measurements of leaf reflectance in the “water bands” constitute an accurate and non-invasive estimator of relative water content (RWC) in holm oak, despite the absence of a reference wavelength, probably due to the low variation in leaf thickness under dehydration. The use of a reference wavelength, which is needed for remote sensing, diminished the accuracy of RWC estimation. Contrastingly, LWCI increased the accuracy of RWC estimation as well as a reference wavelength were used. However, LWCI required the reflectance value at full turgor, diminishing its potential for implementation at field level. In conclusion, this technique would allow the continuous monitoring of the physiological state of holm oak and intelligent water control in truffle cultivation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Formamidinium halide salts as precursors of carbon nitrides

  • Ciria-Ramos, Isabel
  • Navascués, Nuria
  • Diaw, Fatou
  • Furgeaud, Clarisse
  • Arenal, Raúl
  • Ansón-Casaos, Alejandro
  • Haro, Marta
  • Juarez-Perez, Emilio J.
Pyrolysis of formamidinium halide salts (FAI, FABr) results in a new type of amorphous carbon nitride materials with a mass fraction of 40–50% nitrogen content. Pyrolysis temperature drives final chemical composition, morphology, optical and electrical properties of the material independently of the halide precursor and identifying triazine ring, instead of typical heptazine unit, as the main building block of this material. We elaborated a temperature dependent mechanism of formation for these materials and foresee its potential value as native passivation layer in the field of perovskite solar cells. © 2022 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enhancing the temporal stability of DSSCs with novel vinylpyrimidine anchoring and accepting group

  • Duerto, I.
  • Sarasa, S.
  • Barrios, D.
  • Orduna, J.
  • Villacampa, B.
  • Blesa, M. -J
Three compounds based on aniline, thiophene and vinylpyrimidine as anchoring group have been prepared and studied as light harvesting units for dye-sensitized solar cells (DSSCs). They comprise thiophenyl p-spacer systems with one or two thiophenes (AT-Pyri, ATT-Pyri) and aniline as donor which is functionalized, in one case, with an hydroxyl group (HO-AT-Pyri). The bithiophene based dye (ATT-Pyri) shows higher extinction coefficients and smaller transition energy, as well as broader absorption spectrum. Thus, despite lower dye uptake, devices based on one thiophene and with the hydroxyl group (HO-AT-Pyri) have slightly higher power conversion efficiencies (¿) as compared with the analogous dye without this group (AT-Pyri). However, the best performing device is based on the dye with bithiophene bridge (ATT-Pyri) when a co-adsorbent is added to avoid the aggregation of the dye. The photovoltaic parameters of cells based on these vinylpyrimidine dyes are enhanced over 1000 h, especially for ATT-Pyri devices, which reach a ¿ = 6, 4%. © 2022 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Unlocking the catalytic potential of gold (II) complexes: a comprehensive reassessment

  • Pérez-Sánchez, Juan Carlos
  • Pérez Herrera, Raquel
  • Gimeno, M. Concepción
Gold(II) complexes, unlike their gold(I) and gold(III) counterparts, have been sparsely employed in the field of catalysis. This is primarily due to the challenges associated with isolating and characterising these open-shell species. However, these complexes offer a wide range of possibilities. On one hand, this intermediate oxidation state has proven to be more easily accessible through reduction and oxidation processes compared to the gold(I)/gold(III) redox couple, thereby facilitating potential homo-coupling and cross-coupling reactions. On the other hand, gold(II) exhibits Lewis acid behaviour, bridging the characteristics of the soft acid gold(I) and the hard acid gold(III). In this review, we focus on mono- and dinuclear gold(II) complexes, whether they are isolated and well-studied or proposed as intermediates in cross-coupling reactions induced by the action of oxidants or light. We delve into the unique reactivity and potential applications of these gold(II) species, shedding light on their role in this field. This comprehensive exploration aims to underscore the latent promise of gold(II) complexes in catalysis, offering insights into their structural and mechanistic aspects while highlighting their relevance in contemporary chemical transformations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Sustainable ß- and ¿-cyclodextrins for development of highly permeable thin film composite nanofiltration membranes

  • Pina-Vidal, Cristina
  • Luque-Alled, Jose Miguel
  • Coronas, Joaquín
  • Téllez, Carlos
The use of macromolecules, such as cyclodextrins (CDs), given their porosity and compatibility with organic materials, are very attractive for the progress of polymeric membranes in nanofiltration (NF) of aqueous dye solutions. Two types of membranes were fabricated. Firstly, β- and γ-CDs were incorporated to polyamide (PA) thin film composite (TFC) membranes. These membranes, named CD/MPD-TMC, were prepared by conventional interfacial polymerization —i.e., an aqueous solution of m-phenylenediamine (MPD) followed by a solution of trimesoyl chloride (TMC) in hexane— by replacing a certain amount of the MPD monomer with varying proportions of CDs. Secondly, two-step double-IP (TD-IP) membranes were fabricated as follows: CDs were deposited atop the polymer support, followed by addition of TMC —forming a polyester (PE) layer—, and subsequently the membrane surface was modified with MPD molecules. In both CD/MPD-TMC and TD-IP membranes, the presence of CDs improved the membrane performance, the latter configuration leading to much higher water permeances. The TD-IP membrane using β-CD achieved the highest water permeance of 10 L m−2 h−1·bar−1 (LMH bar−1) and a rejection of acridine orange dye (265 Da) greater than 98 %. This represents a 6-fold increase in water permeance compared to bare PA (1.6 LMH bar−1). The enhanced water transport was mainly attributed to the more hydrophilic nature of the membranes and the presence of a PE layer with a porous structure and high pore connectivity. High dye rejection resulted from electrostatic and Donnan repulsions due to surface modification with MPD molecules.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Twisted ways to find plane structures in simple drawings of complete graphs

  • Aichholzer, Oswin
  • García, Alfredo
  • Tejel, Javier
  • Vogtenhuber, Birgit
  • Weinberger, Alexandra
Simple drawings are drawings of graphs in which the edges are Jordan arcs and each pair of edges share at most one point (a proper crossing or a common endpoint). A simple drawing is c-monotone if there is a point O such that each ray emanating from O crosses each edge of the drawing at most once. We introduce a special kind of c-monotone drawings that we call generalized twisted drawings. A c-monotone drawing is generalized twisted if there is a ray emanating from O that crosses all the edges of the drawing. Via this class of drawings, we show that every simple drawing of the complete graph with n vertices contains [fórmula] pairwise disjoint edges and a plane cycle (and hence path) of length [fórmula]. Both results improve over best previously published lower bounds. On the way we show several structural results and properties of generalized twisted and c-monotone drawings, some of which we believe to be of independent interest. For example, we show that a drawing D is c-monotone if there exists a point O such that no edge of D is crossed more than once by any ray that emanates from O and passes through a vertex of D.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Ultrasmall Functionalized UiO-66 Nanoparticle/Polymer Pebax 1657 Thin-Film Nanocomposite Membranes for Optimal CO2 Separation

  • Martínez-Izquierdo, Lidia
  • García-Comas, Cristina
  • Dai, Shan
  • Navarro, Marta
  • Tissot, Antoine
  • Serre, Christian
  • Téllez, Carlos
  • Coronas, Joaquín
Ultrasmall 4 to 6 nm nanoparticles of the metal–organic framework (MOF) UiO-66 (University of Oslo-66) were successfully prepared and embedded into the polymer Pebax 1657 to fabricate thin-film nanocomposite (TFN) membranes for CO2/N2 and CO2/CH4 separations. Furthermore, it has been demonstrated that ligand functionalization with amino (−NH2) and nitro (−NO2) groups significantly enhances the gas separation performance of the membranes. For CO2/N2 separation, 7.5 wt % UiO-66-NH2 nanoparticles provided a 53% improvement in CO2 permeance over the pristine membrane (from 181 to 277 GPU). Regarding the CO2/N2 selectivity, the membranes prepared with 5 wt % UiO-66-NO2 nanoparticles provided an increment of 17% over the membrane without the MOF (from 43.5 to 51.0). However, the CO2 permeance of this membrane dropped to 155 GPU. The addition of 10 wt % ZIF-94 particles with an average particle size of ∼45 nm into the 5 wt % UiO-66-NO2 membrane allowed to increase the CO2 permeance to 192 GPU while maintaining the CO2/N2 selectivity at ca. 51 due to the synergistic interaction between the MOFs and the polymer matrix provided by the hydrophilic nature of ZIF-94. In the case of CO2/CH4 separation, the 7.5 wt % UiO-66-NH2 membrane exhibited the best performance with an increase of the CO2 permeance from 201 to 245 GPU.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Microwave-assisted synthesis of metal–organic frameworks UiO-66 and MOF-808 for enhanced CO2/CH4 separation in PIM-1 mixed matrix membranes

  • Yahia, Mohamed
  • Lozano, Luis A.
  • Zamaro, Juan M.
  • Téllez, Carlos
  • Coronas, Joaquín
This study presents a sustainable microwave-assisted synthesis, based on the use of acetone and a water/acetic acid mixture instead of typical harmful DMF, to fabricate Zr-metal–organic frameworks (MOFs) UiO-66 and MOF-808 as fillers in a PIM-1 matrix for gas separation application. The mixed matrix membranes (MMMs) were prepared with varying loadings (2.5–10 wt%) of MOFs. The physicochemical properties (1H NMR, FTIR, XRD, N2 adsorption, TGA and SEM) of the resulting PIM-1, MOFs and MMMs were analyzed. The CO2/CH4 separation performance and membrane aging characteristics of the MMMs were evaluated. The incorporation of MOF fillers significantly improved CO2 permeability and CO2/CH4 selectivity, attributed to their CO2-philicity and narrow pore size (UiO-66 ≈ 0.6 nm and MOF-808 ≈ 1.8 nm). The MMMs with higher filler loadings (7.5 and 10 wt%) exhibited the most favorable separation performance. Due to the better crystallinity and textural properties, MOF-808 produced the best separation results at 10 wt% filler loading (a CO2/CH4 separation selectivity of 16.2 at 9090 Barrer of CO2 permeability). Aging led to a decrease in CO2 permeability but a slight increase in CO2/CH4 selectivity for all MMMs. Overall, the study highlights the potential of PIM-1/UiO-66 and PIM-1/MOF-808 MMMs as efficient materials for (CO2/CH4) separation comparing with the pristine PIM-1.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Highly permeable ZIF-8 membranes for C2H4/C2H6 separation in a wide temperature range

  • Pérez Miana, Marta
  • Coronas, Joaquín
  • Hedlund, Jonas
  • Yu, Liang
Ethylene/ethane separation is a critical and energy-consuming process in the chemical industry due to the similar properties of the compounds and the great need of ethylene for e.g., polymer production. Many materials have been studied for their implementation as membranes as an energetically favorable alternative to conventional distillation and adsorption processes. Metal-organic frameworks (MOF) have revealed promising properties as highly permeable and selective membranes. Among the most studied and promising MOF candidates is ZIF-8, known for its thermal stability and small pores connected by narrow-sized windows. In this work, we present an analysis of the influence of parameters such as temperature, feed pressure and feed flowrate on the separation of ethylene/ethane through a thin ZIF-8/alumina disc membrane. We observed that the temperature has a significant effect on the separation. The ethylene permeance increased with decreased temperature and reached 8.1 × 10−7 mol/(m2·s·Pa) at −30 °C. At this temperature, the ethylene/ethane selectivity was 2.5. The study concluded with a considerable enhancement of the permeance of ZIF-8 membranes for ethylene/ethane separations, while maintaining a good selectivity compared to the reported values in the literature. The results have important implications for the development of more cost-effective and energy-efficient membrane-based separation technologies for ethylene purification.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Temporal negotiations and injustices in the energy transition: Perspectives from a Spanish coal region

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

El concepto de apariencia en Kant y la crítica a la metafísica dogmática

  • Ramas San Miguel, Clara
En este trabajo se investiga el concepto de apariencia [Schein] que Kant desarrolla en la Crítica de la razón pura y textos complementarios. Se sostendrá que la propuesta crítica de Kant ha de ser comprendida en relación con la tradición metafísica previa —«metafísica dogmática»— y que el concepto de apariencia constituye un punto de anclaje privilegiado para abordar esta relación, además de situar a Kant como pensador moderno. Asimismo, se ofrece, siguiendo a G. Lebrun, una propuesta de distinción entre apariencia lógica y trascendental. Finalmente se demarca el lugar de la ontología y la metafísica tras la operación crítica kantiana.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Marx y la estética marxista

  • Ramas San Miguel, Clara
El objetivo de este artículo es delimitar el sentido de lo estético moderno a partir de dos pensadores representativos de la llamada teoría marxista de la estética, Fredric Jameson y Terry Eagleton, en relación con los planteamientos de Marx. Para ello, se seleccionan algunos conceptos del pensamiento de Jameson y Eagleton –mapeo cognitivo, crítica dialéctica y lo estético como ideología– y se argumenta que pueden pensarse como un desarrollo del núcleo crítico de la crítica de la economía política de Marx, el concepto de apariencia. Se propone así completar el recorrido habitual, explícito en estos mismos pensadores, que encuentra en Marx la genealogía de sus aportaciones, con el camino inverso: qué podría decirse desde Marx a los problemas que sus trabajos plantean en el campo de la estética.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

ZIF-8 modified with 2-undecylimidazolate as filler for mixed matrix membranes for CO<sub>2</sub> separation

  • Pérez-Miana, Marta
  • Luque-Alled, José Miguel
  • Yahia, Mohamed
  • Mayoral, Álvaro
  • Coronas, Joaquín
A novel modification of zeolitic imidazolate framework-8 (ZIF-8) with 2-undecylimidazolate (umIm) was explored to enhance its hydrophobic character and improve its compatibility with polymer of intrinsic microporosity PIM-1 when incorporated as a filler in mixed matrix membranes (MMMs). In addition to the study of the best conditions to exchange the structural ligand of ZIF-8 by umIm and the characterization (by FTIR, RMN, XRD, TGA, N2 adsorption and TEM) of the obtained material, comparative analyses were conducted using MMMs containing the original ZIF-8 and the modified version. Different loadings were applied to study the impact on gas separation properties. Remarkably, the MMM with the modified ZIF-8 demonstrated superior performance surpassing the Robeson upper bound line of 2008 and revealing the effectiveness of this MOF modification strategy. In fact, with the 10 wt% ZIF-8-umIm loading MMM, the highest value of CO2/N2 selectivity was 15.4 (12% higher than that of bare PIM-1) at a CO2 permeability of 16 667 Barrer (52% higher than that of bare PIM-1). These findings highlight the promising potential of the ZIF-8 modification with umIm as a valuable filler material for MMMs in gas separation applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Outline of all potential Power to Gas integrations in blast furnace ironmaking: A systematic review

  • Perpiñán, Jorge
  • Bailera, Manuel
  • Peña, Begoña
This work presents the first systematic review analysis of potential Power to Gas integrations in blast furnace ironmaking. The primary objective of the paper is to evaluate the PtG technology implementation in both conventional air-blown and full oxygen blast furnaces, considering different BFG recycling routes (upper, shaft or tuyeres), and synthetic gases (SNG, H2 or syngas). Employing a systematic methodology, the paper compares all the studies using 14 Key Performance Indicators (KPI) and elaborates a discussion on the main findings and limitations, proposing areas for future research. PtG application enables air-blown blast furnaces to cut emissions to 1060 kgCO2/tHM. With PtG and top gas recycling, oxygen blast furnaces achieve a reduction to 747 kgCO2/tHM, and when combined with geological storage, the reduction further drops to 435 kgCO2/tHM. Additionally, the authors propose a novel PtG-ironmaking integration based on the findings of this paper.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Analysis of Varroa Mite Colony Infestation Level Using New Open Software Based on Deep Learning Techniques

  • Divasón, Jose
  • Romero, Ana
  • Martinez-de-Pison, Francisco Javier
  • Casalongue, Matías
  • Silvestre, Miguel A.
  • Santolaria, Pilar
  • Yániz, Jesús L.
Varroa mites, scientifically identified as Varroa destructor, pose a significant threat to beekeeping and cause one of the most destructive diseases affecting honey bee populations. These parasites attach to bees, feeding on their fat tissue, weakening their immune systems, reducing their lifespans, and even causing colony collapse. They also feed during the pre-imaginal stages of the honey bee in brood cells. Given the critical role of honey bees in pollination and the global food supply, controlling Varroa mites is imperative. One of the most common methods used to evaluate the level of Varroa mite infestation in a bee colony is to count all the mites that fall onto sticky boards placed at the bottom of a colony. However, this is usually a manual process that takes a considerable amount of time. This work proposes a deep learning approach for locating and counting Varroa mites using images of the sticky boards taken by smartphone cameras. To this end, a new realistic dataset has been built: it includes images containing numerous artifacts and blurred parts, which makes the task challenging. After testing various architectures (mainly based on two-stage detectors with feature pyramid networks), combination of hyperparameters and some image enhancement techniques, we have obtained a system that achieves a mean average precision (mAP) metric of 0.9073 on the validation set.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Organizational Context and Satisfaction of Basic Needs of Workers with Intellectual Disability as Sources of Well-Being

  • Fajardo-Castro, Leady V.
  • Martínez-Tur, Vicente
  • Moliner, Carolina
  • Plavsic, Aleksandar
  • Arbués, Jorge
The inclusion of persons with intellectual disabilities (ID) through integrated employment is essential for achieving the United Nations Sustainable Development Goals. This research study examines how organizational contextual factors facilitate or hinder the inclusion and positive contributions of workers with ID in their workplaces, as well as organizational practices that satisfy their basic needs (autonomy, competence, and relatedness), thus promoting their well-being. Semi-structured interviews were conducted with experts in integrated employment, workers with ID, and supervisors. Content analysis was then performed using the grounded theory methodology. Data analysis revealed three main categories: (1) organizational contextual factors that favor inclusion and positive contributions of workers with ID; (2) organizational contextual factors that hinder inclusion and positive contributions of workers with ID; and (3) organizational practices that satisfy basic needs of workers with ID. These findings underscore the importance of creating work environments that promote inclusion, positive contributions, and satisfaction of the basic needs of workers with ID, thus fostering their well-being and professional development.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enhancing CO2/CH4 separation performance in PIM-1 based MXene nanosheets mixed matrix membranes

  • Yahia, Mohamed
  • Refaat, Dalia
  • Coronas, Joaquín
  • Téllez, Carlos
This study presents an approach by integrating MXene nanosheets (Ti2C3Tx) into polymer of intrinsic microporosity (PIM-1) matrix to develop mixed matrix membranes (MMMs) for biogas upgrading. Different concentrations (1–5 wt%) of MXene were incorporated into PIM-1, and the resulting materials were characterized to 1H NMR, FTIR, XRD, TGA, nitrogen adsorption, SEM and EDS to assess their physicochemical properties. The research focused on evaluating the gas separation performance, particularly CO2/CH4 separation, as well as the aging behavior of the MMMs. The incorporating of MXene nanosheets significantly enhanced the CO2 permeability and selectivity of PIM-1 by enhancing gas solubility and diffusivity. The most promising results were observed at 5 wt% filler loading, achieving a 13.5 CO2/CH4 separation selectivity at 7652 Barrer of CO2 permeability. In all membranes with aging time (60 days), there was a decrease in CO2 permeability and a slight increase in CO2/CH4 selectivity, observing that the introduction of MXene slightly mitigates the physical aging process in the PIM-1 polymer. Additionally, the permeability tests revealed higher CO2 permeability and (CO2/CH4) selectivity values for mixed gases compared to single gases. Overall, the study highlights the potential of MXene/PIM-1 MMMs as effective materials for CO2/CH4 separation, outperforming pristine PIM-1.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Single-walled carbon nanotube buckypaper as support for highly permeable double layer polyamide/zeolitic imidazolate framework in nanofiltration processes

  • Berned-Samatán, V.
  • Rubio, C.
  • Galán-González, A.
  • Muñoz, E.
  • Benito, A. M.
  • Maser, W. K.
  • Coronas, J.
  • Téllez, C.
The development of membranes for nanofiltration applications requires not only selective layers but also suitable supports to control their synthesis as well as to enable efficient and competitive membrane performances. Single-walled carbon nanotube free-standing films (denoted as buckypaper) have been used as supports for the preparation of polyamide (PA) layers by interfacial polymerization (IP) and tested for dead-end nanofiltration for dyes removal (265–1017 Da) from water and organic solvents. The arrangement of the phases during the IP is essential, thus impregnation on the buckypaper support, first with the organic phase and then with the aqueous phase (denoted as inverse IP, iIP) leads to permeances (of up to 28.0 and 31.4 L m-2 h-1 bar-1 for water and methanol, respectively) and rejection values (>96%) that exceed those of the membranes prepared by reversing the impregnation order. Secondly, a double layer PA/zeolitic imidazolate framework (ZIF-8 or ZIF-93) was prepared on the buckypaper (bp). The design of this double layer led to superior membrane performance, in particular for the hydrophilic ZIF-93, as it changes the PA layer properties (increasing both hydrophilicity and surface roughness) providing higher permeances (up to 59.3 and 76.0 L m-2 h-1 bar-1 for water and methanol, respectively) and dye rejections (>98.5%) than the bare PA layer prepared by iIP. This attractive performance of the PA/ZIF-93/bp membrane has been corroborated with experiments in cross-flow nanofiltration and dead-end nanofiltration of aqueous salt solutions, long-term stability nanofiltration and the study the membrane separation performance after a chlorine treatment. The results reported here therefore show the enormous potential of these membrane architectures for a variety of selective separation processes. © 2022 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A Methodological Approach for Assessing the Post-Fire Resilience of Pinus halepensis Mill. Plant Communities Using UAV-LiDAR Data Across a Chronosequence

  • Larraz-Juan, Sergio
  • Pérez-Cabello, Fernando
  • Hoffrén Mansoa, Raúl
  • Iranzo Cubel, Cristian
  • Montorio, Raquel
The assessment of fire effects in Aleppo pine forests is crucial for guiding the recovery of burnt areas. This study presents a methodology using UAV-LiDAR data to quantify malleability and elasticity in four burnt areas (1970, 1995, 2008 and 2015) through the statistical analysis of different metrics related to height structure and diversity (Height mean, 99th percentile and Coefficient of Variation), coverage, relative shape and distribution strata (Canopy Cover, Canopy Relief Ratio and Strata Percent Coverage), and canopy complexity (Profile Area and Profile Area Change). In general terms, malleability decreases over time in forest ecosystems that have been affected by wildfires, whereas elasticity is higher than what has been determined in previous studies. However, a particular specificity has been detected from the 1995 fire, so we can assume that there are other situational factors that may be affecting ecosystem resilience. LiDAR metrics and uni-temporal sampling between burnt sectors and control aids are used to understand community resilience and to identify the different recovery stages in P. halepensis forests.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Influence of the delamination of zeolitic imidazolate framework ZIF-7-III on the conversion of sucrose into methyl lactate

  • Navarro, Marta
  • Iglesia, Óscar de la
  • Téllez, Carlos
  • Coronas, Joaquín
The catalytic conversion of sugars to methyl lactate has been in the spotlight of the scientific community in the last decades. In this context, delaminated materials can provide better catalytic performances than their precursors, since they have a better accessibility to their active sites. In order to improve the yield to methyl lactate (ML), new delaminated material ZIF-7-III_EX was synthesized from the exfoliation of the dense Zn-based zeolitic imidazolate framework ZIF-7-III. Different techniques, namely XRD, SEM, TEM, thermogravimetric analysis and CO2 adsorption, were carried out to characterize the obtained materials as well as to verify the exfoliation of the precursor. Regarding the catalytic results, as-synthesized ZIF-7 showed a promising yield to ML, 41.2 %, superior to that achieved by ZIF-9 (based on Co instead of Zn). In addition, the delaminated material ZIF-7-III_EX reached a ML yield of 69.1 %, which implies 67.7 % and 97.4 % of improvements with respect to ZIF-7 and to ZIF-7-III, respectively. The reuse of some selected catalyst materials derived from ZIF-7-III was also studied.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Controlled chemical functionalization toward 3D-2D carbon nanohorn-MoS2 heterostructures with enhanced electrocatalytic activity for protons reduction

  • Kagkoura, A.
  • Arenal, R.
  • Tagmatarchis, N.
The realization of novel heterostructures arising from the combination of nanomaterials is an effective way to modify their physicochemical and electrocatalytic properties, giving them enhanced characteristics stemming from their individual constituents. Interfacing carbon nanohorns (CNHs) possessing high porosity, large specific surface area, and good electrical conductivity, with MoS2 owning multiple electrocatalytic active sites but lacking significant conductivity, robust interactions, and effective structure, can be a strategy to boost the electrocatalytic reduction of protons to molecular hydrogen. Herein, in a stepwise approach, complementary functional groups are covalently introduced at the conical tips and sidewalls of CNHs, along with the basal plane of MoS2, en route the construction of 3D-2D CNH-MoS2 heterostructures. The increased MoS2 loading onto CNHs, improving and facilitating charge delocalization and transfer in neighboring CNHs, along with the plethora of active sites, results in excellent electrocatalytic activity for protons reduction, same as that of commercial Pt/C. Minute overpotential is registered, low Tafel slope and small charge-transfer resistance for electrocatalyzing the evolution of hydrogen from the newly prepared heterostructure of 0.029 V, 71 mV dec(-1), and 34.5 omega, respectively. Furthermore, the stability of the 3D-2D CNH-MoS2 heterostructure is validated after performing 10 000 ongoing electrocatalytic cycles.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Pre-combustion gas separation by ZIF-8-polybenzimidazole mixed matrix membranes in the form of hollow fibres - Long-term experimental study

  • Perea-Cachero A.
  • Etxeberría-Benavides M.
  • David O.
  • Deacon A.
  • Johnson T.
  • Malankowska M.
  • Téllez C.
  • Coronas J.
Polybenzimidazole (PBI) is a promising and suitable membrane polymer for the separation of the H 2 /CO 2 pre-combustion gas mixture due to its high performance in terms of chemical and thermal stability and intrinsic H 2 /CO 2 selectivity. However, there is a lack of long-term separation studies with this polymer, particularly when it is conformed as hollow fibre membrane. This work reports the continuous measurement of the H 2 /CO 2 separation properties of PBI hollow fibres, prepared as mixed matrix membranes with metal-organic framework (MOF) ZIF-8 as filler. To enhance the scope of the experimental approach, ZIF-8 was synthesized from the transformation of ZIF-L upon up-scaling the MOF synthesis into a 1 kg batch. The effects of membrane healing with poly(dimethylsiloxane), to avoid cracks and non-selective gaps, and operation conditions (use of sweep gas or not) were also examined at 200°C during approximately 51 days. In these conditions, for all the membrane samples studied, the H 2 permeance was in the 22-47 GPU range corresponding to 22-32 H 2 /CO 2 selectivity values. Finally, this work continues our previous report on this type of application (Etxeberria-Benavides et al. 2020 Sep. Purif. Technol. 237, 116347 (doi:10.1016/j.seppur.2019.116347)) with important novelties dealing with the use of ZIF-8 for the mixed matrix membrane coming from a green methodology, the long-term gas separation testing for more than 50 days and the study on the membrane operation under more realistic conditions (e.g. without the use of sweep gas).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Waterborne graphene-and nanocellulose-based inks for functional conductive films and 3d structures

  • González-Domínguez J.M.
  • Baigorri A.
  • Álvarez-Sánchez M.Á.
  • Colom E.
  • Villacampa B.
  • Ansón-Casaos A.
  • García-Bordejé E.
  • Benito A.M.
  • Maser W.K.
In the vast field of conductive inks, graphene-based nanomaterials, including chemical derivatives such as graphene oxide as well as carbon nanotubes, offer important advantages as per their excellent physical properties. However, inks filled with carbon nanostructures are usually based on toxic and contaminating organic solvents or surfactants, posing serious health and environmental risks. Water is the most desirable medium for any envisioned application, thus, in this context, nanocellulose, an emerging nanomaterial, enables the dispersion of carbon nanomaterials in aqueous media within a sustainable and environmentally friendly scenario. In this work, we present the development of water-based inks made of a ternary system (graphene oxide, carbon nanotubes and nanocellulose) employing an autoclave method. Upon controlling the experimental variables, low-viscosity inks, high-viscosity pastes or self-standing hydrogels can be obtained in a tailored way. The resulting inks and pastes are further processed by spray-or rod-coating technologies into conductive films, and the hydrogels can be turned into aerogels by freeze-drying. The film properties, with respect to electrical surface resistance, surface morphology and robustness, present favorable opportunities as metal-free conductive layers in liquid-phase processed electronic device structures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Reseña (Review)

Earth-abundant non-toxic perovskite nanocrystals for solution processed solar cells

  • Aina S.
  • Villacampa B.
  • Bernechea M.
Semiconductor nanocrystals, used in quantum dot solar cells, are interesting materials for photovoltaics because they can be obtained in solution and can be composed of abundant elements. Moreover, as compared to other photovoltaic materials, nanomaterials show unique features due to their novel size- and shape-dependent properties such as band gap tuning, multiple exciton generation, and modulation of n- or p-type behaviour by doping or by modifying the ligands on the surface of the nanocrystals. Quantum dot solar cells, together with perovskite solar cells, are the latest incorporation to photovoltaic technologies and have already shown impressive progress in efficiencies and great promise as alternatives to commercial solar cells. However, in all cases, the highest efficiencies are obtained with materials that contain lead in their composition. To solve the problem of toxicity, several materials have been proposed as substitutes. In this review, we summarize some of the non-toxic alternatives that have been synthesized as nanocrystals and incorporated in photovoltaic solar cells, specifically: tin (Sn), germanium (Ge), bismuth (Bi), and antimony (Sb)-based materials. Our findings show that this field has been scarcely covered; there are very few reports on non-toxic perovskite nanocrystals incorporated in solar cells and in general, the efficiencies are still modest. However, this area deserves more attention since some nanocrystal-based solar cells already outperform bulk counterparts. For each case, we also discuss factors limiting efficiency, the approaches followed to overcome these limitations, and the possible solutions to improve efficiency.