Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 197
Encontrada(s) 2 página(s)

Docta Complutense
Datos de investigación Set de datos (Dataset)

Data: In vitro corrosion-assisted cracking of AZ31B Mg alloy with a hybrid PEO+MWCNTs/PCL coating

  • Daavari, Morteza
  • Conde, Ana
  • Atapour, Masoud
  • HosseinpourRokni, Mohsen
  • Mora Sánchez, Hugo
  • Mohedano Sánchez, Marta
  • Matykina, Endzhe
  • Arrabal Durán, Raúl
The effects of multi-walled carbon nanotubes (MWCNTs) incorporation and polycaprolactone (PCL) post-treatment on the environmental-assisted cracking behaviour of a plasma electrolytic oxidation (PEO) coated AZ31B Mg alloy were elucidated in this study. Slow strain rate tensile (SSRT) experiments were carried out in simulated body fluid (SBF) for the bare material and different coating systems with and without MWCNTs and PCL overlay. Electrochemical impedance spectroscopy (EIS) and microscopic examinations (SEM and optical) were also conducted to reveal the role of corrosion on the mechanical response. In spite of the significant positive influence of the PEO coatings (with and without MWCNTs) on the bio-electrochemical behaviour of the AZ31B alloy, the environmental-assisted cracking performance was only marginally improved. Furthermore, PEO+MWCNTs/PCL coating system increased the fracture strain of the specimens by 7% compared to the uncoated specimens. Based on the SEM and optical micrographs, hydrogen embrittlement was suggested as the main cause of failure of the coated specimens under the in vitro slow strain rate test conditions.
Docta Complutense
Datos de investigación Set de datos (Dataset)

Data: Flash-PEO of magnesium: phosphate precursor driven functionalization

  • Guerra-Mutis, Marlon Hernando
  • Vega Vega, Jesus Manuel
  • Barrena Pérez, María Isabel
  • Matykina, Endzhe
  • Arrabal Durán, Raúl
In this study, a phosphate-based conversion coating (PCC) was applied as a precursor before forming silicate-fluoride (SiF) and silicate-phosphate-fluoride (SiPF) based flash-plasma electrolytic oxidation (Flash-PEO) coatings on AZ31B magnesium alloy. The main novelty is the successful incorporation of calcium, zinc, manganese and phosphate species into the Flash-PEO coatings via a precursor layer rather than using the electrolyte. The precursor also led to longer lasting and more intense discharges during the PEO process, resulting in increased pore size. Corrosion studies revealed similar short-term performance for all coatings, with impedance modulus at low frequencies above 107 Ωcm2, and slightly better performance for the SiPF-based coating. Nonetheless, the enlarged pores in the PEO coatings functionalized with the PCC precursor compromised the effectiveness of self-healing mechanisms by creating diffusion pathways for corrosive species, leading to earlier failure. These phenomena were effectively monitored by recording the open circuit potential during immersion in 0.5 wt.% NaCl solution. In summary, this study demonstrates that conversion coatings are a viable option for the functionalization of PEO coatings on magnesium alloys, as they allow for the incorporation of cationic and other species. However, it is crucial to maintain a small pore size to facilitate effective blockage through self-healing mechanisms.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Synthesis and Characterisation of TiO2/ZnO2 hybrid nanostructures formed by electrodeposition with different Zn(NO3)2 concentrations and used in photoelectrochemical applications [Dataset], Influence of Zn(NO3)2 concentration during the ZnO electrodeposition on TiO2 nanosponges used in photoelectrochemical applications

  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Muñoz-Portero, María-José|||0000-0002-7407-2598
  • Navarro-Gázquez, Pedro José
  • Solsona-Espriu, Benjamín
  • Fernández-Domene, Ramón Manuel
  • Sánchez Tovar, Rita
The dataset contains the data that have been obtained during the synthesis and the characterization (structural, compositional, and electrochemical) of TiO2/ZnO2 hybrid nanostructures used in photoelectrochemical applications. TiO2/ZnO hybrid nanostructures were synthetized by electrochemical anodization of titanium to form TiO2 nanosponges with crystalline structure and subsequently ZnO electrodeposition. Different Zn(NO3)2 concentrations were used for electrodeposition (10–60 mM). A structural and compositional characterisation was performed using X-Ray Diffraction (XRD). Electrochemical characterisation of nanostructures was performed by Photoelectrochemical Water Splitting (PWS), stability to photocorrosion, Electrochemical Impedance Spectroscopy (EIS), and Mott-Schottky tests.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Surface modification of jute fabrics by rGO-ICP for eco-friendly supercapacitors, Journal of Energy Storage 2023, Surface modification of jute fabrics by reduced graphene oxide-conducting polymer coatings for their application in low-cost and eco-friendly supercapacitors

  • Cases, Francisco|||0000-0001-8105-4489
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Molina Puerto, Javier|||0000-0003-3378-8271
[EN] In this study, flexible textile supercapacitors were obtained on jute fabrics. Insulating jute fibers were converted into electrically conducting using an optimized reduced graphene oxide (rGO) deposition method. Supercapacitors were made of jute fabric and polypyrrole (PPy) as conducting polymer. rGO improved the electrical behavior of PPy-jute supercapacitors obtained by chemical polymerization. These chemical PPy-jute supercapacitors presented a low surface resistivity (6 Ω/sq) suitable for subsequent electrochemical polymerization. The best results were obtained for rGO-PPy-jute supercapacitors synthesized by electrochemical polymerization, with capacitance values of 5127 mF cm-2 (117 F g-1) in a 3-electrode system; and 1770 mF cm-2, 39.9 F g-1, 250 μW h cm-2 and 1100 μW cm-2 in a 2-electrode system. It is essential to highlight that the jute supercapacitors obtained are eco-friendly, low cost, flexible and with very competitive energy-storage values compared to recent investigations., This research is part of the Spanish R + D + i contract PDC2021-121617-C22 funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” as well as the Red E3Tech Plus: Proyecto Redes de Investigación de la AEI Network E3Tech PLUS (RED2022-134552-T) project. Funding for open access charge: CRUE-Universitat Politècnica de València. Electron Microscopy Service of Universitat Politècnica de València is gratefully acknowledged for help with FESEM microscope.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Experiment 5 REMOTEWEAK Control Scheme Surpress Circulating Currents Parallel 3Phase Inverters [Dataset]

  • Liberos, Marian|||0000-0001-6574-1158
  • González-Medina, Raúl|||0000-0003-0378-5045
  • Patrao Herrero, Iván|||0000-0003-4412-0365
  • Garcerá, Gabriel|||0000-0002-5507-4379
  • Figueres Amorós, Emilio|||0000-0002-0716-3916
This dataset is about the experimental results obtained and published in the article "A Control Scheme to Suppress Circulating Currents in Parallel-Connected Three-Phase Inverters": Liberos, M.; Gonzalez-Medina, R.; Patrao, I.; Garcera , G.; Figueres, E. Electronics 2022, 11, 3720. DOI: 10.3390/electronics11223720 The parallel operation of inverters has many benefits, such as modularity and redundancy. However, the parallel connection of inverters produces circulating currents that may result in malfunctions of the system. In this work, a control technique for the elimination of the low-frequency components of the circulating currents in grid-connected inverters is presented. The proposed control structure contains n - 1 zero-sequence control loops, with n being the number of inverters connected in parallel. Simulation and experimental results have been carried out on a prototype composed of two 5 kW inverters connected in parallel. The results have been obtained by considering the following mismatches between both inverters: inductance values of the grid filters, unbalance of the delivered power, and the use of different modulation techniques.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Experiment 8 REMOTEWEAK: Study of the Dynamics of a Grid-Connected B4 Photovoltaic Inverter [Dataset]

  • Torán, Enric|||0000-0002-0868-9856
  • Liberos, Marian|||0000-0001-6574-1158
  • Patrao Herrero, Iván|||0000-0003-4412-0365
  • González-Medina, Raúl|||0000-0003-0378-5045
  • Garcerá, Gabriel|||0000-0002-5507-4379
  • Figueres Amorós, Emilio|||0000-0002-0716-3916
A theoretical analysis of a three-phase grid-connected B4 photovoltaic inverter was carried out, including modeling, control design, and stability assessment of the current and voltage control loops. The influence of photovoltaic voltage and grid inductance variations was analyzed through a parametric stability study. Finally, simulation-based evaluations were performed under ideal and distorted grid conditions to assess harmonic behavior, DC bus voltage ripple, and overall system performance., Funded by the Ministerio de Ciencia e Innovacion of Spain and the European Regional Development Fund (ERDF) under Grant PID2021-122835OB-C22
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Experiment 1 REMOTEWEAK: Performance Evaluation B4 Topology Grid Inverters [Dataset]

  • Torán, Enric|||0000-0002-0868-9856
  • Garcerá, Gabriel|||0000-0002-5507-4379
  • Figueres Amorós, Emilio|||0000-0002-0716-3916
  • Liberos, Marian|||0000-0001-6574-1158
  • Patrao Herrero, Iván|||0000-0003-4412-0365
  • González-Medina, Raúl|||0000-0003-0378-5045
[EN] This dataset comprises the experimental measurements acquired using a versatile 7 kW inverter prototype configurable as B4 and B6, tested under grid-connected operation in a laboratory microgrid setup. The data support the comparative evaluation of both topologies in terms of efficiency, line-current total harmonic distortion (THD), and current unbalance, among other performance indicators reported in the associated publication. Associated publication: Torán, E.; Liberos, M.; Patrao, I.; González-Medina, R.; Garcerá, G.; Figueres, E. Performance Evaluation of the B4 Topology for Implementing Grid-Connected Inverters in Microgrids. Electronics 2024, 13(9), 1755. DOI: 10.3390/electronics13091755., Project REMOTEWEAK, Mejora de la calidad de potencia en sistemas de potencia remotos con conexión a red débil y elevada penetración de convertidores electrónicos de potencia, funded by the Spanish Ministerio de Ciencia e Innovación and the European Regional Development Fund (ERDF) under Grant PID2021-122835OB-C22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Al Guefoams protected against corrosion by RGO

  • Rodrigo, Rubén
  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Maiorano, Lucila P
  • Molina, José M
  • Cases, Francisco|||0000-0001-8105-4489
To enhance their corrosion protection, Guefoams were coated with RGO using both potentiostatic and potentiodynamic methods. The potentiodynamic method produced the thickest RGO coating and the lowest Cl, O, and Al content, as observed using FESEM and EDX. The Guefoams were exposed to a 3.5% NaCl solution and steam. The polarization resistance was examined, electro-chemical impedance spectroscopy was performed, and polarization curves were constructed to monitor the corrosion process. After 28 days, the Al concentrations in the solutions were meas-ured, and were found to be 145 mg/L (bare Guefoam), 70 mg/L (RGO-coated, potentiostatic), and 35 mg/L (RGO-coated, potentiodynamic). The potentiodynamic RGO coating also showed the best corrosion protection values., Thanks to the projects PDC2021-121617-C21 and PDC2021-121617-C22, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. and Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital (Generalitat Valenciana) (GVA-COVID19/2021/097).The Electron Microscopy Service of the UPV (Universitat Politècnica de València) is gratefully acknowledged for their help with the FESEM and EDX characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Experiment 6 REMOTEWEAK Experimental Study of the Parameter Mismatch Effects on the Low Frequency Circulating Currents of Parallel Three Phase Inverters [Dataset]

  • Liberos, Marian|||0000-0001-6574-1158
  • González-Medina, Raúl|||0000-0003-0378-5045
  • Patrao Herrero, Iván|||0000-0003-4412-0365
  • Torán, Enric|||0000-0002-0868-9856
  • Garcerá, Gabriel|||0000-0002-5507-4379
  • Figueres Amorós, Emilio|||0000-0002-0716-3916
This dataset is about the experimental results obtained and published in the article "Experimental Study of the Parameter Mismatch Effects on the Low Frequency Circulating Currents of Parallel Three Phase Inverters":Liberos, M.; González-Medina, R.; Patrao, I.; Torán, E.; Garcerá, G.; Figueres, E. Eng 2023, 4, 1356-1376. DOI: 10.3390/eng4020079 When converters are connected in parallel, a system with some benefits, including modularity and redundancy, is obtained. However, in these circumstances, circulating currents can appear that produce some adverse effects. In this work, a study of the low-frequency circulating currents that appear in three-phase inverters connected in parallel is performed. The study is focused on the effects produced by the parameter mismatch, namely inductance mismatches, power imbalance, and the use of different pulse with modulation (PWM) techniques. The nature of the circulating current produced by each of these factors were analyzed separately. Both simulation and experimental results are shown, which were obtained using a three-phase 10-kW prototype composed of two 5-kW inverters connected in parallel
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Experiment 7 REMOTEWEAK: Active Power Filter with Selective Harmonic Compensation and Reduced switching Losses [Dataset]

  • Liberos, Marian|||0000-0001-6574-1158
  • González-Medina, Raúl|||0000-0003-0378-5045
  • Patrao Herrero, Iván|||0000-0003-4412-0365
  • Torán, Enric|||0000-0002-0868-9856
  • Garcerá, Gabriel|||0000-0002-5507-4379
  • Figueres Amorós, Emilio|||0000-0002-0716-3916
Active Power Filters (APF) for reducing current harmonic distortion have been widely used in both grids and microgrids. This work proposes a topology for an APF consisting of two Voltage Source Inverters (VSIs) connected in parallel to the same DC-link, which saves space and reduces cost compared to independent APFs. One inverter operates at a low switching frequency and compensates for low-order harmonics. The second inverter operates at a high switching frequency to target high-frequency harmonics. As the high-frequency inverter handles only around 25% of the total RMS current managed by the overall APF, switching losses are significantly reduced. However, connecting inverters in parallel produces circulating currents that can have an adverse effect on the system. In this work, circulating currents are cancelled by controlling the zero-sequence component of the currents in the two inverters.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Experiment 9 REMOTEWEAK: Comparative Analysis B4 and B6 Grid Connected Inverters [Dataset]

  • Torán, Enric|||0000-0002-0868-9856
  • Liberos, Marian|||0000-0001-6574-1158
  • Patrao Herrero, Iván|||0000-0003-4412-0365
  • González-Medina, Raúl|||0000-0003-0378-5045
  • Garcerá, Gabriel|||0000-0002-5507-4379
  • Figueres Amorós, Emilio|||0000-0002-0716-3916
A theoretical analysis of a three-phase grid-connected B4 photovoltaic inverter was carried out, including modeling, control design, and stability assessment of the current and voltage control loops. The influence of photovoltaic voltage and grid inductance variations was analyzed through a parametric stability study. Finally, simulation-based evaluations were performed under ideal and distorted grid conditions to assess harmonic behavior, DC bus voltage ripple, and overall system performance., Funded by the Ministerio de Ciencia e Innovacion of Spain and the European Regional Development Fund (ERDF) under Grant RTI2018-100732-B-C21-AR. Funded by the Ministerio de Ciencia e Innovacion of Spain and the European Regional Development Fund (ERDF) under Grant PID2021-122835OB-C22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Experiment 3 REMOTEWEAK DC Bus Signaling DC Microgrids Renewable Sources [Dataset]

  • Garcerá, Gabriel|||0000-0002-5507-4379
  • Figueres Amorós, Emilio|||0000-0002-0716-3916
  • Patrao Herrero, Iván|||0000-0003-4412-0365
  • Torán, Enric|||0000-0002-0868-9856
  • González-Medina, Raúl|||0000-0003-0378-5045
  • Liberos, Marian|||0000-0001-6574-1158
This dataset is about the experimental results obtained and published in the article by the authors I. Patrao, E. Tor n, R. Gonz lez-Medina, M. Liberos, E. Figueres and G. Garcer , "DC-Bus Signaling Control Laws for the Operation of DC-Microgrids With Renewable Power Sources," in IEEE Journal of Emerging and Selected Topics in Industrial Electronics, vol. 5, no. 3, pp. 1120-1131, July 2024, doi: 10.1109/JESTIE.2023.3345797. The behaviour of the different agents in a microgrid is managed by using the voltage at each node of the microgrid as the DBS signal. The technique proposed in this paper uses an improved DBS technique to coordinate interlinking converters, photovoltaic generators, Energy Storage Systems and loads in a microgrid. The DBS technique proposed in this paper is adapted to integrate renewable power sources in the microgrid. The DBS-controlled Energy Storage Systems (ESS) will store the surplus energy if the generated power exceeds consumption. In the case of fully charged ESS, the renewable generators will limit their output power to those demanded by the loads. The proposed control laws have been tested in an experimental microgrid.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Experiment 2 REMOTEWEAK Control Parallel Interlinking Inverters Hybrid ACDC Microgrid [Dataset]

  • Liberos, Marian|||0000-0001-6574-1158
  • González-Medina, Raúl|||0000-0003-0378-5045
  • Patrao Herrero, Iván|||0000-0003-4412-0365
  • Torán, Enric|||0000-0002-0868-9856
  • Garcerá, Gabriel|||0000-0002-5507-4379
  • Figueres Amorós, Emilio|||0000-0002-0716-3916
Having two or more interlinking converters connected in parallel in hybrid microgrids with AC and DC buses has some benefits, like modularity, flexibility, and redundancy. However, the parallelization of the inverters leads to circulating currents that can cause system malfunctions. This work uses a method for suppressing low-frequency circulating currents in interlinking converters by controlling the zero-sequence component of the phase currents, showing that the control structure is valid for interlinking converters. The proposed control scheme has been applied to two parallel interlinking inverters of 5 kW and 2.5 kW, respectively. The interlinking inverters are connected to the grid, and they control the voltage in the DC bus of the hybrid microgrid. To validate the concept, simulation and experimental results are shown.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Experiment 4 REMOTEWEAK: Small Signal Model NPC GCC Multilevel Inverter PV [Dataset]

  • Patrao Herrero, Iván|||0000-0003-4412-0365
  • Garcerá, Gabriel|||0000-0002-5507-4379
  • Figueres Amorós, Emilio|||0000-0002-0716-3916
  • Liberos, Marian|||0000-0001-6574-1158
  • González-Medina, Raúl|||0000-0003-0378-5045
  • Torán, Enric|||0000-0002-0868-9856
[EN] Experimental results about the control structure and the dynamic modelling of the NPC+GCC transformerless inverter used in single phase Photovoltaic power systems. The high capacitance to ground of the photovoltaic generator leads to undesirable high-leakage currents. Using half-bridge topologies dramatically reduces the leakage to ground, and using a multilevel half-bridge inverters improves the output quality compared with classical inverters. The neutral point clamped + generation control circuit (NPC + GCC) topology is a multilevel single-phase transformerless inverter capable of tracking the maximum power point of two photovoltaic sources at the same time. The Pulse-Width Modulated (PWM) switch model in continuous conduction mode (CCM) has been used to obtain the small-signal model of the two switching converters that make up the inverter. The resulting dynamic model is used to quantify the stability margins of both converters' current and voltage loops., Project REMOTEWEAK, Mejora de la calidad de potencia en sistemas de potencia remotos con conexión a red débil y elevada penetración de convertidores electrónicos de potencia. Funded by the Ministerio de Ciencia e Innovación of Spain and the European Regional Development Fund (ERDF) under Grant PID2021-122835OB-C22
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

OVS-SCM Modulation (raw data)

  • Pérez Pascual, Mª Asunción|||0000-0002-6925-6878
This dataset contains the raw data of the measurements presented in the paper: "A Computational Efficient Nyquist Shaping Approach for Short-Reach Optical Communications" (https://doi.org/10.1109/JLT.2019.2961506). - Medidas_BER_EVM.xls: contains BER and EVM measurements made for different types of modulations for both the HC-SCM modulator and the OVS-SCM, varying the following parameters: oversampling factor, transmitter filter span, rolloff factor, receiver filter span, receiver equalizer order, pre-emphasis filter (in transmission) - Medidas_Potencia.xls: contains BER and EVM values varying the received power for HC-SCM and OVS-SCM modulations; for all QAM modulations under study.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Experiment Algorithm Emulating Photovoltaic Strings [Dataset]

  • Patrao Herrero, Iván|||0000-0003-4412-0365
  • González-Medina, Raúl|||0000-0003-0378-5045
  • Figueres Amorós, Emilio|||0000-0002-0716-3916
  • Garcerá, Gabriel|||0000-0002-5507-4379
This dataset is about the experimental results obtained and published in the article by authors Iván Patrao, Raul González-Medina, Gabriel Garcerá and Emilio Figueres Amorós, "An Algorithm for Emulating Photovoltaic Strings With Dynamic Partial Shadowing Capability: A Practical Study". IEEE Industrial Electronics Magazine. 17, pp. 61 - 69. 2023. ISSN 1932-4529. DOI: 10.1109/MIE.2022.3151017 In this paper a low computational cost algorithm for emulating PV strings with dynamic partial shadowing capability is presented, suitable for microcontroller-based emulators. It is based on the emulator proposed in reference [16]. The developed algorithm rebuilds the I-V curve of the whole string on-the-fly, according to an irradiance and temperature time-varying profile for each panel.
RUA. Repositorio Institucional de la Universidad de Alicante
Datos de investigación Set de datos (Dataset)

Data for: "H2 production by celulose photoreforming with TiO2-Cu photocatalysts bearing different Cu species"

  • Belda-Marco, Sergio
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
El fichero incluye los datos obtenidos del trabajo experimental que ha dado lugar a la publicación. El resumen del contenido de la misma es: TiO2-Cu photocatalysts (1 wt% Cu) containing different copper species have been prepared and used for the generation of hydrogen by photoreforming of cellulose (the major component of biomass) in water at room temperature using UV light. A positive effect of copper has been clearly observed, and the analysis of the role of the Cu species present shows that a mixture of Cu(I) and Cu(II) favors the process. Among the TiO2-Cu photocatalysts, the one prepared by a simple impregnation method and not heat-treated, which shows small and well dispersed copper species particles, gives the highest hydrogen production.
RUA. Repositorio Institucional de la Universidad de Alicante
Datos de investigación Set de datos (Dataset)

Dataset del Artículo Publicidad programática y desinformación en España

  • Castellanos-Trujillo, Vianny Geraldine
  • Rodríguez-Ferrándiz, Raúl
  • Rodríguez-Ferrándiz, Raúl|||/items/394f3621-8267-41df-9ee4-903977b014d3
Tabla resumen en Excel que incluye los anunciantes detectados en los ocho pseudo-medios monitorizados durante el periodo de la muestra, así como los proveedores de servicio de publicidad programática.
RUA. Repositorio Institucional de la Universidad de Alicante
Datos de investigación Set de datos (Dataset)

Data for the regular article "Exploring the Effects Behind the Outstanding Catalytic Performance of PdAg Catalysts Supported on Almond Shell-Derived Activated Carbon Towards the Dehydrogenation of Formic Acid"

  • Riquelme-García, Paula
  • Chaparro-Garnica, Jessica
  • Navlani-García, Miriam
  • Cazorla-Amorós, Diego
  • Chaparro-Garnica, Jessica|||/items/ef0cb7bf-ab19-4397-9276-686b1829395e
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Riquelme-García, Paula|||/items/eaa40ff9-6931-43ac-9865-2c13ac4a77c9
This file contains data of the figures of the experiments performed and of the microscopy images.
RUA. Repositorio Institucional de la Universidad de Alicante
Datos de investigación Set de datos (Dataset)

Proposal for an indicator of interactivity for the top YouTuber content in Spanish, Research material

  • Tur-Viñes, Victoria
  • González-Río, María-José
  • González-Río, María-José|||/items/f5703e1f-0891-45b0-8476-79b731646100
  • Tur-Viñes, Victoria|||/items/bf844414-3ea4-4124-8aa5-47487acd2a53
Data base of the article titled Is YouTube being used to its full potential? Proposal for an indicator of interactivity for the top YouTuber content in Spanish
RUA. Repositorio Institucional de la Universidad de Alicante
Datos de investigación Set de datos (Dataset)

The food sector in YouTube content aimed at children: obesogenic features, El sector alimentación en contenidos de YouTube dirigidos a la audiencia infantil: rasgos obesogénicos

  • Castello-Martinez, Araceli
  • Tur-Viñes, Victoria
  • Castello-Martinez, Araceli|||/items/3c876f7f-aa32-41bc-8bc8-2aebe89651fa
  • Tur-Viñes, Victoria|||/items/bf844414-3ea4-4124-8aa5-47487acd2a53
We analyze and compare the advertising by food brands on regular TV networks (traditional advertising) with videos by child YouTubers (influencing) in Spanish. An exploratory study is conducted by means of a content analysis of 304 videos, with 22 variables grouped into 4 categories: obesogenic features, innovative trends, prevalence of ultra-processed vs. healthy products in advertising, and marketing style.
RUA. Repositorio Institucional de la Universidad de Alicante
Datos de investigación Set de datos (Dataset)

Bases de datos relacionados con el proyecto Pobreza Hídrica (PID2019-104456RB-C22)

  • Hernández-Hernández, María
  • Rico, Antonio
  • Zapana-Churata, Luis
  • Villar Navascués, Rubén Alejandro
  • Hernández-Hernández, María|||/items/fe2d50cb-e80f-478c-abae-8a9b860777dc
  • Rico, Antonio|||/items/8ae27656-76fc-4d62-99dd-1dd8ba97634e
RUA. Repositorio Institucional de la Universidad de Alicante
Datos de investigación Set de datos (Dataset)

Data for the regular article "Enhanced electrocatalytic performance of SrMn1-xCoxO3 perovskite metal oxides for oxygen reactions in Zn-air batteries: Influence of Mn/Co ratio"

  • Riquelme-García, Paula
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Flores-Lasluisa, Jhony Xavier
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Riquelme-García, Paula|||/items/eaa40ff9-6931-43ac-9865-2c13ac4a77c9
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
This file contains data of the figures of the experiments performed and of the microscopy images.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Datos de investigación Set de datos (Dataset)

Entropy-engineered 2D layered double hydroxides as efficient single-component visible-light photocatalysts for selective NOx removal [Dataset]

  • Ruz Luna, Antonio Manuel
  • Gámiz Ruiz, Beatriz María
  • Marín Toral, Laura
  • Pavlovic Milicevic, Ivana
  • Sánchez Granados, Luis
Datos de investigación asociados al artículo: http://hdl.handle.net/10396/36725
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset of the article entitled Dietary canthaxanthin reduces xanthophyll uptake and red coloration in adult red-legged partridges

  • Alonso-Álvarez, Carlos
  • García-de Blas, Esther
  • Mateo, Rafael
Excel Dataset including "initial" and "final" values for red coloration, plasma carotenoids and vitamins of partridges treated with diquat or control (diquat row) and receiving different carotenoids in the diet (group). The dataset also includes values from terminal tissue samples (ornaments, liver, heart and fat) and the carotenoid and vitamin content in the egg yolk. Finally, it also includes initial values as residuals from mixed models controlling for random factors (e.g. lab session) and confounding covariates (red chip hue in leg pictures). These residuals were used as covariates in model testing experimental treatment effects on final values., Esther García-de Blas was supported by a predoctoral grant (JAE-PRE) from the Consejo Superior de Investigaciones Científicas (CSIC) co-financed by Fondo Social Europeo (EU). This study was funded by Consejería de Educación y Ciencia, Junta de Comunidades de Castilla la Mancha (project ref.: PII1I09-0271-5037) and Ministerio de Economía y Competitividad (CGL2009-10883-C02-02 and CGL2015-69338-C2-2-P) from the Spanish Government., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Cantarero et al 2019 carotenoid-based coloration PLOSONE

  • Cantarero, Alejandro
  • Pérez-Rodríguez, Lorenzo
  • Romero-Haro, Ana A.
  • Chastel, Olivier
  • Alonso-Álvarez, Carlos
Dataset of the scientific article "Carotenoid-based coloration predicts both longevity and lifetime fecundity in male birds, but testosterone disrupts signal reliability"., Financial support was obtained from the projects PII1I09-0271-5037, PII1C09-0128-4724, SBPLY/17/180501/000468 from the JCCM (co-financed with European Regional Development Fund –ERDF) and CGL2009-10883-C02-02 and CGL2015-69338-C2-2-P from Ministerio de Ciencia e Innovación (MICIN, Spain). AC and LP-R were supported by a “Juan de la Cierva-formación” postdoctoral grant from Ministerio de Economía, Industria y Competitividad (MINECO, FJCI-2015-23536) and a SECTI postdoctoral contract from the University of Castilla-La Mancha (UCLM), respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Laboratory study of rate coefficients for H2:H2 inelastic collisions between 295 and 20 K: Supplemental Material, Supplemental Material to Laboratory study of rate coefficients for H2:H2 inelastic collisions between 295 and 20 K

  • Montero, Salvador
  • Tejeda, Guzmán
  • Fernández Sánchez, José María
This data set contains the Supplemental Material to the paper "Laboratory study of rate coefficients for H2:H2 inelastic collisions between 295 and 20 K" by S. Montero, G. Tejeda, and J.M. Fernandez, to be published in Astrophysical Journal Supplement Series (2019)., This data set contains several topics related with the structure and properties of the Master Equation (MEQ) employed in the main article, owing to its potential interest for the detailed understanding of thermal non-equilibrium in H2 media. These topics include: 1) The general structure of the MEQ. 2) The importance of "up-down" inelastic collision processes for the correct interpretation of H2 rarefi ed media. 3) The influence of the medium onto the e ficiency of the inelastic collision processes. 4) The detailed structure of the MEQ, in the form of three Tables containing all the experimental data on the local gas-dynamic variables and on the collision rates at three selected points of the supersonic jet., Spanish Ministerio de Ciencia e Innovación (MICINN) and Spanish Ministerio de Economia y Competitividad (MINECO), grants CONSOLIDER-ASTROMOL CSD2009-0038, FIS2010-22064-C01, FIS2013-48275-C2-2-P, and FIS2017-84391-C2-1-P., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Cantarero et al 2020 Evolution repository data

  • Cantarero, Alejandro
  • Mateo, Rafael
  • Camarero, Pablo R.
  • Alonso, Daniel
  • Fernández-Eslava, Blanca
  • Alonso-Álvarez, Carlos
Dataset (excel) containing the data used in the analyses of the accepted manuscript entitled: Testing the shared-pathway hypothesis in the carotenoid-based coloration of red crossbills. The article will be published in Evolution., Descriptions of each variable are included as comments on the name of the variable (first row). Readme file added., This is a dataset that allowed testing the shared-pathway hypothesis on the honest signaling based on animal colorations created by red ketocarotenoid pigments. The dataset includes levels of pigments and vitamins in blood and feathers as well as feather coloration in captive Eurasian crossbills under captivity., Ministerio de Economía y Competitividad, Ministerio de Ciencia e Innovación, Fundación Ramón Areces, Spain., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Cantarero et al CYP2J19 manipulation in zebra finches

  • Cantarero, Alejandro
  • Andrade, Pedro
  • Carneiro, Miguel
  • Moreno-Borralbo, Adrián
  • Alonso-Álvarez, Carlos
Descriptions of each variable are included as comments on the name of the variable (first row). Readme file added., This is a dataset that allows testing the effect of a mito-targeted antioxidant (mitoTEMPO) and a thyroid hormone (T3) on the level of expression of the gene CYP2J19 in the bill tissue of male zebra finches, and also their impact on bill redness and circulating carotenoid levels., Ministerio de Economía y Competitividad, Ministerio de Ciencia e Innovación, Fundación Ramón Areces, Spain., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Litospheric Structure of the North Iberian Margin: MARCONI-WA reflection profiles

  • Gallart Muset, Josep
  • Pulgar, J. A.
  • Muñoz, Josep A.
  • Diaz, J.
  • Ruiz Fernández, Mario
An onshore-offshore network of 24 Ocean-Bottom Seismometers or Hydrophones (12 OBS and 8 OBH) and 35 land stations deployed in 46 different sites. The OBS/OBH network remained fixed during all the experiment and covered on place all the profile intersections, with an average spacing of 30–40 km. The land seismic stations were deployed with an average spacing of 10–15 km extending the N-S profiles onshore, with some additional instruments following the shoreline. The seismic source consisted of a Bolt airgun array fired every 40 s, resulting in a shot spacing of 100 m. The shooting pressure was set constant at 140 bars., Ruiz Fernández, Mario; mruiz@geo3bcn.csic.es, MARCONI (MARgen COntinental Nord Iberico - North Iberian Continental Margin) is a deep seismic reflection survey carried out in the southeastern part of the Bay of Biscay in September 2003. It included the acquisition of 11 multichannel (http://dx.doi.org/10.20350/digitalCSIC/8972) and wide-angle deep seismic reflection profiles covering a total length of 2000 km., MARCONI (MARgen COntinental Nord Iberico - North Iberian Continental Margin) is a deep seismic reflection survey carried out in the southeastern part of the Bay of Biscay in September 2003. It included the acquisition of 11 multichannel (http://dx.doi.org/10.20350/digitalCSIC/8972) and wide-angle deep seismic reflection profiles covering a total length of 2000 km, Ministerio de Ciencia y Tecnología, REN2001-1734, MARCONI; CDS2006-0041, Consolider-Ingenio 2010 Programme Topo-Iberia; Ministerio de Ciencia e Innovación, CGL2008-03474-E/BTE, TopoMed; Ministerio de Economía y Competitividad, CGL2013-48601-C2-2-R, MISTERIOS, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Experimental data files of manuscript Protein biomarkers of bovine defective meats at a Glance: Gel-Free Hybrid Quadrupole-Orbitrap Analysis for Rapid Screening

  • Sentandreu, Enrique
  • Fuente García, Claudia
  • Pardo, Olga
  • Oliván, Mamen
  • León, Núria
  • Aldai, Noelia
  • Yusà, Vicent
  • Sentandreu, Miguel Angel
The dataset is made available under the Open Database License. Any rights in individual contents of the database are licensed under the Database Contents License. Please, read the full ODbL 1.0 license text for the exact terms that apply. Users of the dataset are free to: Share: copy, distribute and use the database, either commercially or non-commercially. Create: produce derivative works from the database. Adapt: modify, transform and build upon the database. Under the following conditions: Attribution: You must attribute any public use of the database, or works produced from the database. For any use or redistribution of the database, or works produced from it, you must make clear to others the license of the original database. Share-Alike: If you publicly use any adapted version of this database, or works produced from an adapted database, you must also offer that adapted database under the ODbL., Department of Economic Development and Infrastructures of the Basque Government is acknowledged for the doctoral fellowship of C.F.G. Funding from Project RTA2014-00034-C04 (Spanish Instituto Nacional de Investigación y Tecnología Agraria, INIA), funding and contract of E. Sentandreu from project RTI2018-096162-R-C22 (Spanish Agencia Estatal de Investigación) and FEDER founds are also fully acknowledged., List of experimental data: A-Original raw LC-MS datafiles in mzXML format: -Merged MS1-MS/MS analyses: QexNORMALhesiOFFMS1MS2 QexHIGHhesiOFFhesiOFFMS1MS2 -Isolated MS1 analysis: QexNORMALhesiOFFMS1 QexHIGHhesiOFFMS1 B-Mascot Generic Format (.mgf) files from ddMS2 data to be interrogated by MASCOT search engine. -QexHIGHhesiOFF.mgf -QexNORMALhesiOFF.mgf, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Gravity data from the GeoPiri3D project (2.5D and 3D characterization of the crustal structure of the Catalan Pyrenees with special attention to granitic bodies and Permocarboniferous volcano-sedimentary basins

  • Ayala, C.
  • Rey Moral, María del Carmen
  • Rubio Sánchez-Aguililla, Félix Manuel
  • Martín León, Juliana
  • Llorente, José M.
  • González Durán, Agustín
  • Bellmunt, Fabian
  • Gabàs, Anna
  • Macau, Albert
Gravity data on the Central Pyrenees: a step forward to help a better understanding of the Pyrenean structures http://hdl.handle.net/10261/256413, This database corresponds to the new Bouguer and residual Bouguer anomaly gravity data of the Central Pyrenees calculated from 3588 stations, of which 1140 are new observations acquired from surveys performed between 2018 and 2019. The processing, calculations and interpretations can be found in Gravity data on the Central Pyrenees: a step forward to help a better understanding of the Pyrenean structures (Ayala et al., 2020, DOI … ). Please note that there is a difference of one data from this database respect the number that appears on the paper. This is due to the identification of a duplicated point after the publication of the paper. The duplicated point has been deleted from this database., This database is part of the project CGL2017-84901-C2-2-P funded by MCIN/AEI/10.13039/501100011033 and "ERDF A way of making Europe", Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

WineGut_BrainUp laboratory images [Dataset]

  • Bartolomé, Begoña
  • Moreno-Arribas, M. Victoria
  • Lloret Iglesias, Lara
  • Aguilar, Fernando
  • Cobo Cano, Miriam
  • García Díaz, Daniel
  • Heredia, Ignacio
  • Yuste, Silvia
  • Pérez-Matute, Patricia
  • Motilva, María-José
The DATASET compiles 24.305 files corresponding to individual images of glasses containing red wine. Each file name is unique and contains information of the parameters under which the photograph was taken (see DATA-SPECIFIC INFORMATION for details). The photographs of glasses containing wine were acquired with different smartphones equipped with high-resolution cameras (12 or 48 MP). Photographs were previously designed considering usual photographic parameters (see DATA-SPECIFIC INFORMATION for details)., This study was financially supported by Grants PID2019-108851RB-C21 and PID2019- 108851RB-C22 (Spanish Ministry of Science and Innovation), and co-funded by the European Social Fund (“FEDER Una manera de hacer Europa”), European Union., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Numerical_Model_WM_Peral_et_al_2022

  • Peral, M.
  • Fernández Ortiga, Manel
  • Vergés Masip, Jaume
  • Zlotnik, Sergio
  • Jimenez-Munt, Ivone
The geodynamic evolution of the Western Mediterranean related to the closure of the Ligurian-Tethys ocean is not yet fully resolved. We present a new 3D numerical model of double subduction with opposite polarities fostered by the inherited segmentation of the Ligurian-Tethys margins and rifting system between Iberia and NW Africa. The model is constrained by plate kinematic reconstructions and assumes that both Alboran-Tethys and Algerian-Tethys plate segments are separated by a NW-SE transform zone enabling that subduction polarity changes from SE-dipping in the Alboran-Tethys segment to NW-dipping in the Algerian-Tethys segment. The model starts about late Eocene times at 36.5 Ma and the temporal evolution of the simulation is tied to the geological evolution by comparing the rates of convergence and trench retreat, and the onset and end of opening in the Alboran Basin. Curvature of the Alboran- Tethys slab is imposed by the pinning of its western edge when reaching the end of the transform zone in the adjacent west-Africa continental block. The progressive curvature of the trench explains the observed regional stress reorientation changing from N-S to NW-SE and to E-W in the central and western regions of the Alboran Basin. The increase of the retreat rates from the Alboran- Tethys to the Algerian-Tethys slabs is compatible with the west-to-east transition from continental-to-magmatic-to-oceanic crustal nature and with the massive and partially synchronous calc-alkaline and alkaline magmatism. Alkaline magmatism is related to the induced sublithospheric mantle flow by the double subduction system depicting a NE-SW upwelling trend., This work is funded by the SUBTETIS (PIE-CSIC-201830E039, CSIC), ALORBE (PIE- CSIC-202030E310), GeoCAM (PGC2018-095154-B-I00, Spanish Government), Equinor R&T Fornebu (Norway), and the Generalitat de Catalunya grant (AGAUR 2017 SGR 847). We also thank the computer resources at MareNostrum and the technical support provided by the Barcelona Supercomputing Center (BSC) through several projects (AECT-2019-1-0013 and AECT-2019-2-0005). S. Z. has been funded by the Spanish Ministry through Grant DPI2017-85139-C2-2-R, by the Catalan Government through Grant 2017-SGR-1278, and by the EU's Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie Grant Agreement 777778. This work has been done in the framework of the Unidad Asociada of LACAN-UPC with CSIC and using the facilities of the Laboratory of Geodynamic Modeling from Geo3BCN-CSIC., Numerical experiments are named M1 and M2. M1: Alboran-Algerian system; M2: Alboran system, according to Figure S2 in Peral et al., 2022. Increasing numbers indicate different timesteps of each experiment., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Tracking the evolution of the quality parameters in four monovarietal virgin olive oils during 27 months of storage simulating market conditions [Dataset]

  • Lobo Prieto, Ana
  • Tena, Noelia
  • Aparicio-Ruiz, R.
  • Morales-Millán, María Teresa
  • García-González, Diego L.
This data set contains the underlying data of two scientific publications: Lobo Prieto, Ana; Tena, Noelia; Aparicio-Ruiz, Ramón; Morales, María T.; García-González, Diego L.; 2020; Tracking sensory characteristics of virgin olive oils during storage: Interpretation of their changes from a multiparametric perspective. Molecules 25, 1686. Food Control 123, 107823. https://doi.org/10.3390/molecules25071686. Lobo-Prieto, Ana; Tena, Noelia; Aparicio-Ruiz, Ramón; García-González, Diego L.; Sikorska, Ewa; 2020. Monitoring virgin olive oil shelf-life by fluorescence spectroscopy and sensory characteristics: A multidimensional study carried out under simulated market conditions. Foods 9, 1846. https://doi.org/10.3390/foods9121846. Virgin olive oil is inevitably subject to an oxidation process during storage that can affect its quality due to off-flavors that develop before the oil surpasses its ‘best before’ date. Due to the complexity of the oxidation process at moderate conditions, where many parameters are involved, a multiparametric study is necessary to understand globally the physical-chemical changes and sensory quality degradation in a real storage experiment. In this context, a storage experiment of 27 months was performed for four monovarietal virgin olive oils, bottled in transparent 500-mL PET bottles and subjected to conditions close to a supermarket scenario (1000 lx with 12 hours of light/dark cycles and 25 °C). Physical-chemical quality parameters, phenolic compounds, α-tocopherol concentration and the degradation products of chlorophyll a were determined every month. Simultaneously, an accredited sensory panel assessed their sensory characteristics. The different physical-chemical quality parameters studied (peroxide value, free acidity, K232 and K270) were determined following the International Olive Council (COI) standard methods. The concentration of total phenols was determined by solid phase extraction and HPLC analysis, following the method described by Aparicio-Ruiz et al. (2016), and the α-tocopherol concentration was determined using the method ISO 9936:2016. Finally, the degradation compounds of chlorophyll a (pheophytin a and pyropheophytin a) were measured using the method specified by ISO 29841:2012. The dataset presents the results of all the parameters mentioned above for the four monovarietal virgin olive oils subjected to storage at moderate conditions during 27 months., Project Info: “Nuevas estrategias de verificación del tiempo de vida útil y la fecha de consumo preferente del aceite de oliva virgen mediante indicadores espectroscópicos” and “Materiales de referencia de notas sensoriales positivas de aceites de oliva vírgenes extra basado en marcadores volatiles y estudios de interacción aroma-aroma“, funded by State Research Agency. Proyectos AGL2015-69320-R and RTI2018-101546-B-C21/22 financiado por MCIN/ AEI /10.13039/501100011033/ FEDER “Una manera de hacer Europa”., The dataset consists of: a numerical quantitative file saved both in .xlsx and .ods formats (“VOO_storage_xlsx.xlsx” - “VOO_storage _ods.ods”. A README file “VOO_storage_README_rtf.rtf”, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Coastal pH variability reconstructed through machine learning in the Balearic Sea

  • Hendriks, Iris E.
  • Flecha, Susana
  • Giménez-Romero, Alex
  • Tintoré, Joaquín
  • Pérez, Fiz F.
  • Alou-Font, Eva
  • Matías, Manuel A.
[Description of methods used for collection/generation of data] Data was acquired in both stations using a SAMI-pH (Sunburst Sensors LCC) was attached, at 1 m in the Bay of Palma and at 4 m depth in Cabrera. The pH sensors were measuring pH, in the total scale (pH𝑇), hourly since December 2018 in the Bay of Palma and since November 2019 in Cabrera. The sensor precision and accuracy are < 0.001 pH and ± 0.003 pH units, respectively. Monthly maintenance of the sensors was performed including data download and surface cleaning. Temperature and salinity for the Cabrera mooring line was obtained starting November 2019 with a CT SBE37 (Sea-Bird Scientific©). Accuracy of the CT is ± 0.002 ∘C for temperature and ± 0.003 mS cm−1−1 for conductivity. Additionally, oxygen data from a SBE 63 (Sea-Bird Scientific ©) sensor attached to the CT in Cabrera were used. Accuracy of oxygen sensors is ± 2% for the SBE 63., [Methods for processing the data] Once data (available at https://doi.org/XXX/DigitalCSIC/XXX) was validated, several processing steps were performed to ensure an optimal training process for the neural network models. First, all the data of the time series were re-sampled by averaging the data points obtaining a daily frequency. Afterwards, a standard feature-scaling procedure (min-max normalization) was applied to every feature (temperature, salinity and oxygen) and to pHT. Finally, we built our training and validations sets as tensors with dimensions (batchsize, windowsize, 𝑁features), where batchsize is the number of examples to train per iteration, windowsize is the number of past and future points considered and 𝑁features is the number of features used to predict the target series. Temperature values below 𝑇=12.5T=12.5 °C were discarded as they are considered outliers in sensor data outside the normal range in the study area. A BiDireccional Long Short-Term Memory (BD-LSTM) neural network was selected as the best architecture to reconstruct the pHT time series, with no signs of overfitting and achieving less than 1% error in both training and validation sets. Data corresponding to the Bay of Palma were used in the selection of the best neural network architecture. The code and data used to determine the best neural network architecture can be found in a GitHub repository mentioned in the context information., Funding for this work was provided by the projects RTI2018-095441-B-C21, RTI2018-095441-B-C22 (SuMaEco) and Grant MDM-2017-0711 (María de Maeztu Excellence Unit) funded by MCIN/AEI/10.13039/501100011033 and by the “ERDF A way of making Europe", the BBVA Foundation project Posi-COIN and the Balearic Islands Government projects AAEE111/2017 and SEPPO (2018). SF was supported by a “Margalida Comas” postdoctoral scholarship, also from the Balearic Islands Government. FFP was supported by the BOCATS2 (PID2019-104279GB-C21) project funded by MCIN/AEI/10.13039/501100011033.This work is a contribution to CSIC’s Thematic Interdisciplinary Platform PTI WATER:iOS (https://pti-waterios.csic.es/)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset of Mechanically stimulated gas emission from pellets of sodium alanate subjected to rubbing at room temperature under vacuum and related surface, structural, mechanical, and tribological characterization of the pellets

  • Muñoz-Cortés, Esmeralda
  • Ibryaeva, Olga
  • Manso Silván, Miguel
  • Zabala, Borja
  • Flores, Eduardo
  • Gutiérrez, Almudena
  • Ares, José R.
  • Nevshupa, Roman
The pellets were subjected to reciprocating rubbing under vacuum (10-7 mbar range) using an alumina sphere, 3 mm in diameter. A specially designed friction cell with nearly zero own gas emission was used. The motion frequency was 1 Hz. One motion cycle consisted of one forth and one back stroke, each of which lasted for about 40 ms. The indenter stood still for around 50 ms after the forth stroke and 870 ms after the back one. The stroke length was la = 7 mm, the mean sliding speed was Vs = 0.18 m s-1 and the normal load was in the range 0.22 – 0.88 N. The total and partial gas pressures were measured in the experimental vacuum chamber, where the pellets were rubbed, using an ionization Bayard-Alpert type vacuum gauge and a quadrupole mass-spectrometer, correspondingly. To quantify minute gas emission rates (<1 nmol/s) the experimental chamber was connected to a gas-expansion chamber through a diaphragm, which conductance under molecular gas flow was carefully measured. Before starting the experiments, the chamber was pumped out for at least 48 hours to achieve stable background pressure (the rate of change of low-pass filtered pressure signal ≤10-11 mbar s-1). The gas emission was evaluated from the pressure time series during the mechanical action and benchmarked against the stable background. The gas composition and the emission rates were determined using a previously developed statistical matrix method. X-ray diffraction (XRD) with Cu Kα (λ = 0.15418 nm) radiation was employed for the structural characterization of NaAlH4. To assess the thermal stability of NaAlH4 Temperature-Programmed Desorption Mass-Spectrometry (TPD-MS) was used. A portion of NaAlH4 powder was placed into an alumina crucible in a glove box under Ar atmosphere (MBraun, <1 ppm H2O, <10 ppm O2). Alumina crucible was used instead of a Pt one to avoid possible decomposition of NaAlH4 due to the catalytic effect of Pt. The crucible was transferred to the TPD-MS system, where it was set into another Pt crucible. During the transfer, the sample was briefly exposed to the atmospheric air (about 5 min). The test was carried out under an Ar flux of 50 ml/s and a heating rate of 5 ºC/min. The mechanically affected zones were characterized using FTIR spectrometry, Raman confocal spectroscopy (incident laser wavelength  = 532 nm and power 5.6 mW) and Scanning Electron Microscopy (Hitachi S 800) to contrast possible structural and chemical variations induced in the material by the mechanical action. All the results were benchmarked against the measurements on the pristine zones of the same pellets., Datasets of mass-spectrometry signals were obtained in the experiments with non-thermal dehydrogenation of sodium alanate through the application of mechanical energy. An application of mechanical energy was explored as a new non-thermal method to drive H2 emission from undoped sodium alanate at room temperature. Dehydrogenation reactions were studied on a micrometer scale using localized rubbing under ultrahigh vacuum. Mechanically Stimulated Gas Emission Mass-Spectrometry (MSGE-MS) including the Dynamic gas expansion method was used to determine the kinetic parameters of hydrogen emission as well as the composition and emission behaviour of trace gases. It was found that mild rubbing of NaAlH4 pellets under vacuum led to intensive and almost instantaneous gas emission. The dominating species in the emitted gases was H2 (>99%). Traces (~0.1%) of mono- and polyalanes, NaAlH4 vapours, CO2 and other no identified gases were registered. Several H2 emission modes, which characteristic time constants ranged widely from 0.6 to 465 s, were observed. None of the dehydrogenation reactions involved could be connected to either the thermal effect of friction or the direct coupling of mechanical forces to the energy landscape of chemical reactions. The study was complemented by structural, morphological, tribological, mechanical and surface analyses. It was suggested that the tribochemical reactions can be triggered by plastic deformation and shearing., This study was co-funded by Spanish Ministry for Science and Innovation (grants PID2019-111063RB-I00, PID2020-112770RB-C22 and RTI2018-099794-B-I00) and the Basque Government via the EMAITEK Plus 2020 programme., 1.Dataset of mass-spectrometry time series of mechanically stimulated gas emission from sodium alanate (NaAlH4) pellets under vacuum.-- 2. Dataset of Thermal Programmed Desorption – Mass-Spectrometry (TPD-MS) analysis of sodium alanate.-- 3. Dataset of X-ray diffraction of sodium alanate.-- 4. Dataset of micro-FTIR spectra of pristine and mechanically activated surfaces of pellets of sodium alanate.-- 5. Dataset of Raman spectra measured on the surfaces of pellets of sodium alanate., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

BrainGut_WineUp daily lifelike images [Dataset]

  • Bartolomé, Begoña
  • Moreno-Arribas, M. Victoria
  • Lloret Iglesias, Lara
  • Aguilar, Fernando
  • Cobo Cano, Miriam
  • García Díaz, Daniel
  • Heredia, Ignacio
  • Yuste, Silvia
  • Pérez-Matute, Patricia
  • Motilva, María-José
The photographs of glasses containing wine were acquired by researchers with different smartphones equipped with high-resolution cameras (12 or 48 MP). Photographs were previously designed considering usual photographic parameters (see DATA-SPECIFIC INFORMATION for details).-- The data have not been processed., The DATASET compiles 1.945 files corresponding to individual images of glasses containing red wine. The photographs of glasses containing wine were acquired by researchers with different smartphones equipped with high-resolution cameras (12 or 48 MP). Photographs were previously designed considering usual photographic parameters. Each file name is unique and contains information of the parameters under which the photograph was taken., This study was supported by MCIN (Ministerio de Ciencia e Innovación)/AEI (Agencia Estatal de Investigación)/10 .13039 /501100011033through the projects PID2019-108851RB-C21 & PID2019-108851RB-C22. The authors would like to thank CSIC Interdisciplinary Thematic Platform (PTI+) Digital Science and Innovation., The DATASET compiles 1.945 files corresponding to individual images of glasses containing red wine. Each file name is unique and contains information of the parameters under which the photograph was taken (see DATA-SPECIFIC INFOR-MATION for details). For example: The file Rea_Rio_C_Bor_175_nd_nd_fr10_nd_nd_ar2 corresponds to an almost real image (Rea), taken in La Rioja (Rio), of a “crianza wine”(C), in a Bourgogne wine glass (Bor), with a volume of 175 mL (175), taken at none defined time (nd) and undefined lighting (nd), with a real back-ground (fr10) and without reference (nd) nor distance (nd) considerations, and upper angle (ar2)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

BrainGut_WineUp real images [Dataset]

  • Relaño de la Guía, Edgard
  • Lloret Iglesias, Lara
  • Aguilar, Fernando
  • Cobo Cano, Miriam
  • García Díaz, Daniel
  • Heredia, Ignacio
  • Yuste, Silvia
  • Pérez-Matute, Patricia
  • Motilva, María-José
  • Bartolomé, Begoña
  • Moreno-Arribas, M. Victoria
The photographs of glasses containing wine were acquired by wine consumers with different smartphones equipped with high-resolution cameras (12 or 48 MP). Photographs were previously designed considering usual photographic parameters (see DATA-SPECIFIC INFORMATION for details).-- The data have not been processed., The DATASET compiles 229 files corresponding to individual images of glasses containing red wine. The photographs of glasses containing wine were acquired by wine consumers with different smartphones equipped with high-resolution cameras (12 or 48 MP). Each file name is unique and contains information of the parameters under which the photo-graph was taken., This study was supported by MCIN (Ministerio de Ciencia e Innovación)/AEI (Agencia Estatal de Investigación)/10 .13039 /501100011033through the projects PID2019-108851RB-C21 & PID2019-108851RB-C22. The authors would like to thank CSIC Interdisciplinary Thematic Platform (PTI+) Digital Science and Innovation., The DATASET compiles 229 files corresponding to individual images of glasses containing red wine. Each file name is unique and contains information of the parameters under which the photograph was taken (see DATA-SPECIFIC INFOR-MATION for details). For example: The file Vol_Mad_C_Bor_175_Cena_nd_nd_nd_nd_nd corresponds to a real image taken by a consumer(#Vol), taken in Madrid (Mad), of a “crianza wine”(C), in a Bourgogne wine glass (Bor), with a volume of 175 mL (175), taken at dinner (Cena) with undefined lighting (nd) and a random real background (nd), and without reference (nd) nor distance (nd), nor angle (nd) considerations., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset from Overwinter users of nest cavities affect breeding birds via nest-dwelling ectoparasites

  • García-Núñez, Antonio José
  • Tomás, Gustavo
  • Zamora-Muñoz, Carmen
  • Valera, Francisco
  • Soler, Juan José
Dataset 1 includes weekly estimations of median, maximum, minimum and range values of temperature and humidity in nest boxes, for three locations, two experimental treatments and in relation to dormice presence in February., Dataset 2 includes daily differences (between 9:00 am and 3:00 am) in temperature and humidity of open nest boxes occupied or not by dormice., Dataset 3 describes Carnus emergence patterns from each sample of nest material, including number of emerged flies (Carnus abundance), date of first emergence and emergence duration., Dataset 4 includes intensity of parasitism suffered by hoopoe nestlings during the breeding season after the experiment, showing number of Carnus, hatching date, brood size and nestling age., The dataset contains data collected in Guadix, Granada (southeast Spain) in 2020, in the framework of a research to evaluate the effects of overwinter occupancy of nest cavities on the incidence of ectoparasitism suffered by hoopoes (Upupa epops) in the next breeding season., The research group benefited from grants CGL2017-83103-P, CGL2017-89063-P, PGC2018-097426-B-C22, and PID2020-117429GB-C21 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”. AJGN was funded by the Spanish Ministerio de Ciencia, Innovación y Universidades (Programa de Formación de Personal Investigador JAE Intro). GT was supported by the Ramón y Cajal Programme (RYC-2013-13040)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

MOPREDAScentury: a long-term monthly precipitation grid for the Spanish mainland, v.2.0.0 [Dataset], MOPREDAScentury_PP_1916-2020_zero-inflated

  • Beguería, Santiago
  • Peña-Angulo, Dhais
  • Trullenque Blanco, Víctor
  • González Hidalgo, José Carlos
[EN] A monthly precipitation gridded data set over mainland Spain between December 1915 and December 2020. The dataset combines ground observations from the National Climate Data Bank (NCDB) of the Spanish national climate and weather service (AEMET) and new data rescued from meteorological yearbooks published prior to 1951 that was never incorporated into the NCDB. The yearbooks data represented a significant improvement of the dataset, as it almost doubled the number of weather stations available during the first decades of the 20th century, the period when the dataset was more scarce. The final dataset contains records from 11,312 stations. Spatial interpolation was performed using geostatistical techniques over a regular 0.1° × 0.1° grid, using a two-stage process: estimation of the probability of zero-precipitation (dry month), and estimation of precipitation magnitude., [ES] Conjunto de datos en rejilla de precipitación mensual en la España peninsular, entre diciembre de 1915 y diciembre de 2020. El conjunto de datos utilizado combina observaciones del Banco Nacional de Datos de AEMET y nuevos datos rescatados de los anuarios climáticos publicados con anterioridad a 1951, y que casi duplican la información existente sobre la primera mitad del siglo 20. El conjunto final contiene información de un total de 11.312 observatorios. Se utilizaron técnicas geoestadísticas para interpolar espacialmente las observaciones sobre una rejilla regular de 0.1° × 0.1°, utilizando un proceso en dos pasos: en primer lugar se interpoló la probabilidad de mes seco (precipitación igual a cero), y en un segundo paso la magnitud de la precipitación., Projects CGL2017-83866-C3-3-R (CLICES: Climate of the last Century in the Spanish mainland) and PID2020-116860RB-C22 EXE: Extremos térmicos y pluviométricos en la España peninsular 1916-2020), funded by the Spanish Ministry of Science., Mean grid; standard deviation grid; netCDF., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Relationship between telomere length and early glutathione levels in the erythrocytes of zebra finches

DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Modeled deep structure of the South Orkney Microcontinent (SOM): sedimentary cover thickness, geometry of the intruded batholith causing the Pacific Margin Anomaly (PMA) and depth of the Moho

  • Morales-Ocaña, Cecilia
  • Bohoyo, Fernando
  • Escutia, Carlota
  • Marín-Lechado, Carlos
  • Rey-Moral, Carmen
  • Druet Vélez, María
  • Galindo-Zaldívar, Jesús
  • Maestro González, Adolfo
The opening of the Scotia Arc resulted in the final breakup of the land bridge between South America and the Antarctic Peninsula. The South Orkney Microcontinent (SOM) constituted part of this former connection and it is now the largest continental block in the Southern Scotia Arc. We present the first 3D model of the SOM that, given its strategic position and characteristics, allows us to advance the knowledge of the tectonic processes involved in the development of the Scotia Arc. Due to the scarcity of reliable geological data, the initial approximation of the deep structure of the SOM was supported by the calculation of three main geological boundaries from geophysical data: the acoustic basement, the boundary of the magnetic anomaly source and the Moho depth. The 3D model was built, refined and validated by forward modeling and joint inversion of gravity and magnetic data. We have accurately defined the geometry of the sedimentary cover, determined the geometry of the intrusive igneous body causing the Pacific Margin Anomaly (PMA) and mapped the heterogeneity of the crustal thickness. These structural features show a clear relationship to each other and are consistent with an important E-W extension to the east of the SOM during early stages of the Scotia Arc formation, prior to the opening of the Powell Basin., This research was funded by the Spanish Ministry of Science and Innovation through the coordinated project TASDRACC (CTM2017-89711-C2-1P and CTM2017-89711-C2-2P), cofounded by the European Union through FEDER funds, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset for Present-day accommodation of Caribbean-North American oblique plate convergence through the Ocoa-Bonao-La Guacara fault zone, southern central Hispaniola: a transition zone between oceanic subduction and arc-oceanic plateau collision

  • Escuder Viruete, Javier
  • Fernández Rodríguez, Francisco José
  • Pérez Valera, Fernando
  • Medialdea, Alicia
The description of methods used for collection/generation of data is included in Supporting Information S1 file: Summary of analytical techniques and methods. - The methods for processing the data are included in Supporting Information S1 file: Summary of analytical techniques and methods. - The instrument- or software-specific information needed to interpret/reproduce the data is included in Supporting Information S1 file: Summary of analytical techniques and methods., [EN] This dataset present methodological, seismic, structural and geochronological (optically stimulated luminescence) data collected in southern central Hispaniola Island to better understand the regional process of collision between the Beata Ridge and the back-arc margin of the Caribbean island-arc. In particular, the role played by the Ocoa-Bonao-La Guacara fault zone (OBGFZ), which is an active, NNE to NE-striking large-scale fault system that crosses the southern central sector of Hispaniola in the Dominican Republic along more than 250 km., The research was funded through PID2019-105625RB-C22 project of the 940 MCIN/AEI/10.13039/501100011033 of the Spanish Government, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

LC-MS and LC-MS/MS dataset for the paper “Cao A, Gesteiro N, Santiago R, Malvar RA and Butrón A (2023) Maize kernel metabolome involved in resistance to fusarium ear rot and fumonisin contamination. Front. Plant Sci. 14:1160092"

  • Cao Caamaño, Ana
  • Gesteiro Portas, Noemí
  • Santiago Carabelos, Rogelio
  • Malvar Pintos, Rosa Ana
  • Butrón Gómez, Ana María
[Description of methods used for collection/generation of data] The untargeted metabolomic analysis was conducted by ultra-high-performance liquid chromatography (UHPLC) (Ultimate3000 LC; Thermo Scientific) coupled to a quadrupole-time-of-flight mass spectrometer (QTOF-MS) equipped with an electrospray ionization source (ESI) (Bruker Compact; Bruker Daltonics). Samples (5 μl injection volume) were separated in an Intensity Solo 2 C18 column (1.7 μm, 2.1× 100 mm; Bruker Daltonics) at 35°C. A binary solvent system consisted of 0.1% of formic acid on water (solvent A) and acetonitrile (solvent B) with a 0.4 ml/min flow rate was used with the following gradient conditions: 0 min, 3% B; 4 min, 3% B; 16 min, 25% B; 25min, 80% B; 30 min, 100% B; 32 min, 100% B; return to initial conditions at 33 min (3% B) and maintain until 36 min. The MS acquisition was performed in both negative and positive ionization modes for full scan and auto MS/MS, in a mass scan range of m/z 100-1200. Specific conditions used were: gas flow 9 L/min, nebulizer pressure 38 psi, dry gas 9 L/min, and dry temperature 220°C; capillary and end plate offset were set to 4500 and 500 V, respectively. MS/MS analysis was performed by using different collision energy ramps to cover a range from 15 to 50 eV. The instrument was calibrated externally with a solution of 1mM sodium formate/acetate in 2-propanol:water 50:50 with 0.2% formic acid directly infused to the source. A calibration solution of formate and acetate clusters was injected at the beginning of each run., The present dataset belongs to an untargeted metabolomic study proposed to uncover pathways implicated in resistance to Fusarium ear rot (FER) and fumonisin contamination in the maize kernel and to look for possible biomarkers, using maize inbreds genetically related but with contrasting levels of resistance. The dataset are LC-MS and LC-MS/MS experimental data for untargeted metabolomics of maize immature kernels extracts from eight recombinant inbred lines (RILs) with different level of resistance to FER and fumonisin accumulation at two sampling dates (3 and 10 days) after Fusarium verticillioides inoculation (dat). Spectral data were adquired in a LC-ESI-QTOF mass spectrometer (Bruker Daltonics). MS acquisition was performed in both negative and positive ionization modes for full scan and auto MS/MS, in a mass scan range of m/z 100-1200 with Bruker OTOF Control and DataAnalisys software (Bruker Daltonics). Raw data were converted to .mzML format with ProteoWizard MSConvert tool (Version: 3.0.23163-09bc765). FER and fumonisin resistant RILs are labeled as 1758, 1762, 1766, 1768; susceptible RILs are labeled as 1757, 1759, 1761, 1763. For each combination of RIL and sampling date three biological replicates were analized and can be found inside each RIL MS data .zip file. MS/MS data were obtained from a bulk of the 3 replicates for each RIL-sampling date combination and can be found in the MS/MS data .zip files. Discriminant metabolites between resistant and susceptible RILs were rather found at 10 than 3 dat. Differences for membrane lipid homeostasis, methionine metabolism, and indolacetic acid conjugation seemed highly relevant to distinguish between resistant and susceptible inbreds, confirming the polygenic nature of resistance to FER and fumonisin contamination in the maize kernels. Some specific metabolites such as the polyamine spermidine and/or the alkaloid isoquinoline seemed to be promising indirect selection traits to improve resistance to FER and reduce fumonisin accumulation., FER and fumonisin resistant RILs are labeled as 1758 (RIL125), 1762 (RIL128), 1766 (RIL114), 1768 (RIL279); susceptible RILs are labeled as 1757 (RIL14), 1759 (RIL348), 1761 (RIL319), 1763 (RIL152)., This research was funded by subsequent coordinated projects financed by MCIU/AEI/FEDER, UE (RTI2018-096776-B-C21, RTI2018-096776-B-C22, PID2021-122196OB-C21 and PID2021-122196OB-C22). We also used funds of the CSIC project 2021AEP132., BLANK_MS_Negative.zip BLANK_MS_Positive.zip RIL_1757_10d_MS_Negative.zip RIL_1757_10d_MS_Positive.zip RIL_1758_10d_MS_Negative.zip RIL_1758_10d_MS_Positive.zip RIL_1758_3d_MS_Negative.zip RIL_1758_3d_MS_Positive.zip RIL_1759_10d_MS_Negative.zip RIL_1759_10d_MS_Positive.zip RIL_1759_3d_MS_Negative.zip RIL_1759_3d_MS_Positive.zip RIL_1761_10d_MS_Negative.zip RIL_1761_10d_MS_Positive.zip RIL_1761_3d_MS_Negative.zip RIL_1761_3d_MS_Positive.zip RIL_1762_10d_MS_Negative.zip RIL_1762_10d_MS_Positive.zip RIL_1762_3d_MS_Negative.zip RIL_1762_3d_MS_Positive.zip RIL_1763_10d_MS_Negative.zip RIL_1763_10d_MS_Positive.zip RIL_1763_3d_MS_Negative.zip RIL_1763_3d_MS_Positive.zip RIL_1766_10d_MS_Negative.zip RIL_1766_10d_MS_Positive.zip RIL_1766_3d_MS_Negative.zip RIL_1766_3d_MS_Positive.zip RIL_1768_10d_MS_Negative.zip RIL_1768_10d_MS_Positive.zip RIL_1768_3d_MS_Negative.zip RIL_1768_3d_MS_Positive.zip RILs_10d_MSMS_Negative.zip RILs_10d_MSMS_Positive.zip RILs_3d_MSMS_Negative.zip RILs_3d_MSMS_Positive.zip, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Spanish Drought Catalogue, v1.0.0. [Dataset]

  • González Hidalgo, José Carlos
  • Beguería, Santiago
  • Trullenque Blanco, Víctor
  • Vicente Serrano, Sergio M.
  • Peña-Angulo, Dhais
[EN] 1. Compressed folder ('Spanish_Drought_Catalogue_v1.0.0-Drought_episodes.zip'): 40 folders with the graphic description of each event, numbered from 1 to 40 and with their respective start and end dates (e.g. '19_1973_oct-1974_feb'). In each of them, three folders: 'maps' with the integral maps of duration and intensity (.png format), 'seq_ano' with the maps of the spatial spread (.png format) and 'ts' with the averages of SPI01 and SPI12 and the area affected by the drought (SPI12 =< -0.84) (.png format). Map legends (.png format). .xlsx file showing the identification and characterization of the events. 2. Compressed folder ('Drought_events_characterization_code.zip'): project, script and folder with the data necessary to generate the descriptive analysis material in R. 3. netCDF file ('Spanish_Drought_Catalogue_v1.0.0-SPI_grids.nc'). Variables (6): 'SPI-01' (1-month Standardized Precipitation Index), 'SPI-03' (3-month Standardized Precipitation Index), 'SPI-06' (6-month Standardized Precipitation Index), 'SPI-12' (12-month Standardized Precipitation Index), 'SPI-36' (36-month Standardized Precipitation Index) and 'evnt' (Drought episodes). Temporal extent: 1272 (months from 1915-01 to 2020-01). Spatial extent: longitude = 125, latitude: 77, units = 0.1 degrees. Reference system: EPSG 4326, WGS84 projection, geographic coordinates. Open Data Commons Attribution (ODC-By 1.0)., [EN] The database consists of a netCDF ('Spanish_Drought_Catalogue_v1.0.0-SPI_grids.nc') and two zipped folders ('Spanish_Drought_Catalogue_v1.0.0-Drought_episodes.zip' and 'Drought_events_characterization_code.zip'). The first folder includes a descriptive analysis of the 40 drought episodes identified according to the criteria of drought intensity (SPI12 =< -0.84) and area affected (>20 % of the grid area). For each episode, the time series of the SPI01 and SPI12 average of the whole grid (expressed in anomalies); the area of the grid under drought conditions (SPI12 =< -0.84) (expressed in percent per one); the integral maps of the episode according to its duration (expressed in number of months) and intensity (average of the cells under drought conditions); and the maps representing the spatial propagation of the episode are included. The second folder includes the code necessary to generate the descriptive analysis material. The netCDF consists of six variables. The first five are the precipitation anomalies (Standardized Precipitation Index at 1 month, 3, 6, 12 and 36 time scales: 'SPI-01', 'SPI-03', 'SPI-06', 'SPI-12' and 'SPI-36'), these have been obtained from the monthly data of the MOPREDAScentury precipitation grid (https://doi.org/10.20350/digitalCSIC/15136). The sixth variable is the drought events themselves ('evnt'), numbered from 1 to 40. These six variables refer to the Spanish peninsular territory and the time period 1915/01-2020/01. This record corresponds to version 1.0.0 of the dataset. The database is distributed under an open license (Open Data Commons Attribution, ODC-By)., [ES] La base de datos consta de un netCDF ('Spanish_Drought_Catalogue_v1.0.0-SPI_grids.nc') y dos carpetas comprimidas ('Spanish_Drought_Catalogue_v1.0.0-Drought_episodes.zip' y 'Drought_events_characterization_code.zip'). En la primera carpeta se incluye un análisis descriptivo de los 40 episodios de sequía identificados según los criterios de intensidad de la sequía (SPI12 =< -0.84) y superficie afectada (>20 % de la superficie de la malla). Para cada episodio se incluyen las series temporales del SPI01 y SPI12 promedio de toda la malla (expresadas en anomalías); el área de la malla en condiciones de sequía (SPI12 =< -0.84) (expresada en tanto por uno); los mapas integrales del episodio atendiendo a su duración (expresada en número de meses) e intensidad (promedio de las celdas en condiciones de sequía); y los mapas que representan la propagación espacial del episodio. En la segunda carpeta se incluye el código necesario para generar el material del análisis descriptivo. El netCDF consta de seis variables. Las cinco primeras son las anomalías de precipitación (Standardized Precipitation Index a escala temporal de 1 mes, 3, 6, 12 y 36: ‘SPI-01’, ‘SPI-03’, ‘SPI-06’, ‘SPI-12’ y ‘SPI-36’), estas han sido obtenidas a partir de los datos mensuales de la malla de precipitación MOPREDAScentury (https://doi.org/10.20350/digitalCSIC/15136). La sexta variable son los eventos de sequía propiamente dichos (‘evnt’), numerados del 1 al 40. Estas seis variables están referidas al territorio peninsular español y el periodo temporal 1915/01-2020/01. Este registro se corresponde con la versión 1.0.0 del conjunto de datos. La base de datos se distribuye bajo una licencia abierta (Open Data Commons Attribution, ODC-By)., Project PID2020-116860RB-C22: Extremos térmicos y pluviométricos en la España peninsular 1916-2020), funded by the Spanish Ministry of Science., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Data of carcass monitoring in rewilding mountain landscapes

  • Oliva-Vidal, Pilar
  • Sebastián-González, Esther
  • Margalida, Antoni
From October 2017 to August 2019, we monitored 178 carcasses (herbivores, n = 154; carnivores, n = 24) of different species ranging in size from 1–100 kg, placed across three landscape types (open, n = 70; shrubland, n = 71; and forest, n = 37). Herbivore carcasses consisted of sheep/goat Ovis aries/Capra hircus (n = 60, mean ± SD = 47.65 ± 12.53 kg, including lambs/kids: n = 31, 9.34 ± 6.33 kg); wild boar Sus scrofa (n = 40, 53.20 ± 22.47 kg); roe deer (n = 8, 22.04 ± 3.60 kg); and European rabbit Oryctolagus cuniculus (n = 15, 1.48 ± 0.29 kg). Carnivore carcasses (mean weight ± SD = 5.71 ± 3.14 kg) consisted of red fox Vulpes vulpes (n = 6), European badger Meles meles (n = 9), stone marten Martes foina (n = 2) and domestic cat Felis silvestris catus (n = 7). Carcasses were placed between 600 and 1750 m a.s.l., Rural abandonment and subsequent vegetation regeneration (‘passive rewilding’) are expected to increase worldwide, producing cascades of dynamic socioeconomic, landscape and biological changes. Although landscape characteristics strongly influence the structure and functioning of scavengers, little is known about the ecological consequences of passive rewilding due to woody encroachment (i.e., ‘landscape closure’) on scavenging assemblages. We investigated differences in ‘scavenger assemblage composition’ (species richness and abundances) and ‘scavenging efficiency’ (scavenging frequency, detection and consumption times and consumption rates) in a mountain agroecosystem (Pyrenees) undergoing passive rewilding. We monitored 178 carcasses in three landscapes: ‘open’, ‘shrubland’ and ‘forest’, and evaluated the effects of landscape type on ‘scavenger assemblage composition’ and ‘scavenging efficiency’ at the community and species levels, while accounting for the influences of carcass size, type and placement time. We also examined whether the locally most abundant and efficient scavenger (i.e., the griffon vulture Gyps fulvus) affects scavenging patterns. We found that landscape type was the main factor governing scavenging dynamics. Overall and average scavenger richness were similar in open and shrubland landscapes, while forests contained the lowest number of scavengers, mainly comprising mammals. Unlike mammals, avian scavenging frequency decreased as vegetation cover increased, especially for obligate scavengers (i.e., vultures). Scavenger abundances were highest in open landscapes, and carcasses were detected and consumed more rapidly in these landscapes. Carcass size did not influence detection and consumption times, although it did affect average scavenger richness, abundances and consumption rates. Consumption rates were higher in open landscapes and were strongly associated with the presence of griffon vultures. Interestingly, we found that griffon vultures influenced scavenging dynamics via facilitation processes. However, woody encroachment could reduce the scavenging role of this species, while favoring mammalian facultative scavengers. Finally, our findings highlight the pivotal role of griffon vultures, mediated by landscape characteristics, in reducing carcass persistence., Ministerio de Ciencia, Innovación y Universidades, Award: RTI2018- 099609-B-C22, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Data for: Extra nestlings that are condemned to die increase reproductive success in hoopoes

  • Barón, M. Dolores
  • Martín-Vivaldi, Manuel
  • Martínez-Renau, Ester
  • Soler, Juan José
[How to contribute] For any problems downloading the data or for additional information, please send us an email and we will provide you with the necessary information. We would also appreciate your feedback regarding potential errors., [Ethics statement] All procedures were conducted according to relevant Spanish national (Decreto 105/2011, 19 de abril) and regional guidelines. Necessary permits for hoopoe manipulation were provided by Consejería de Medio Ambiente de la Junta de Andalucía, Spain (Ref: SGYB/FOA/AFR/CFS and SGMN/GyB/JMIF). All applicable guidelines for the care and use of animals were followed., The research group received funds from the projects PID2020-117429GB-C21 and PID2020-117429GB-C22, funded by the Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación/10.13039/501100011033 and by “Fondo Europeo de Desarrollo Regional, a way of making Europe”. We also benefited from facilities, including an apartment, provided by the city authorities of Guadix., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting Information for Transformation of CoFe2O4 spinel structure into active and robust CoFe alloy/N-doped carbon electrocatalyst for oxygen evolution reaction [Dataset]

  • Gebreslase, Gebrehiwet Abrham
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
Under a Creative Commons license CC-BY 4.0, Figure S 1. SEM images of (a) CoFe/NC10% , (b) CoFe/NC20% , and (c) CoFe/NC40%. Figure S 2.TEM images of (a) CoFe/NC10% , (b) CoFe/NC20% , and (c) CoFe/NC40%. Figure S 3. Particle size distribution of the various electrocatalyst: (a) CoFe2O4, (b) CoFe/NC10% , (c) CoFe/NC20% ,(d) CoFe/NC30% , and (e) CoFe/NC40% . Table S 1. Amount of CoFe alloys and oxides in the composite samples, determined from the XRD analysis. Figure S 4. XPS high resolution spectra of (a) Fe 2p, (b) Co 2p, for all electrocatalysts. Table S 2. XPS analysis results of the electrocatalysts. Table S 3. Elemental composition of the prepared electrocatalysts. Table S 4. Specific capacitance and ECSA values for the various eletrocataysts. Table S 5. Charge transfer resistance (Rct) and solution resistance (Rs) determined from EIS measurement. Figure S 5. ECSA-normalized polarization curve., Financial support from the European Union's Horizon 2020 Research and Innovation programme under the Marie Skłodowska-Curie Actions-Innovative Training Networks (MSCA-ITN) Grant Agreement 813748 are gratefully acknowledged. The authors wish to acknowledge the grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting information of: Effect of the effective refractive index on the radiative decay rate in nanoparticle thin films [Dataset]

  • Romero Aguilar, Manuel
  • Sánchez-Valencia, J. R.
  • Lozano, Gabriel
  • Míguez, Hernán
In this work, we theoretically and experimentally study the influence of the optical environment on the radiative decay rate of luminescent nanoparticles forming a thin film. We use electric dipole sources in finite-difference time-domain simulations to analyze the effect of modifying the effective refractive index of transparent layers made of phosphor nanocrystals doped with rare earth cations, and propose a significant correction to previously reported analytical models for calculating the radiative decay rate. Our predictions are tested against an experimental realization of such films, in which we manage to vary the effective refractive index in a gradual and controllable manner. Our model accurately accounts for the measurements attained, allows us discriminating the radiative and non-radiative contributions to the time-resolved photoluminescence, and provides a way to rationally tune the spontaneous decay rate and hence the photoluminescence quantum yield of an ensemble of nanoparticles., This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Programme (NANOPHOM, grant agreement no. 715832), from the BBVA Foundation Leonardo Grant for Physics Researchers 2023, and from MCIN/AEI/ 10.13039/501100011033 by European Union NextGeneration EU/PRTR under grant TED2021-129679B-C22., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Appendix A. Supplementary data for Dual functional materials based on Ni and different alkaline metals on alumina for the cyclic stepwise CO2 capture and methanation [Dataset]

  • García-Bordejé, José Enrique
  • Dongil, Ana Belén
  • Conesa, José María
  • Guerrero-Ruiz, Antonio
  • Rodríguez-Ramos, Inmaculada
XPS alkaline: The Na 1s XPS peak (Figure S13) can be fitted to two main contributions one at 1071.6 eV which can be ascribed to sodium carbonates and bicarbonates and other at 1073.1 eV which can be ascribed to sodium oxides and hydroxides. The ratio of carbonate species to alumina (Table 1) do not vary significantly or decreases slightly after reaction in agreement with C 1s fitting. Therefore, there is no building up of stable carbonates at 450 ºC, which are comparable to those formed from atmospheric CO2 adsorption at room temperature.-- We have fitted the Ba 3d5/2 peak to two peaks separated by around 2 eV (Figure S14). One peak at 779.0 eV which can be ascribed to barium oxide (BaO).The other peak at 781.0 eV that can be ascribed to Ba atoms in a decomposed barium carbonate layer. [5–8] In contrast to other materials, the Ba-containing materials contains less total carbon, nickel carbide and carbonates after CO2 reaction than before reaction (Table 1). In fact, the spectra of passivated material and reacted material are quite similar (Figure S15). This suggests that no stable carbonates or carbide species different from CO2 adsorbed at room temperature are formed. Some authors also found the carbonate localized in the outermost 20 A of passivated Ba titanate. The authors related this carbonate formation to possible contamination by atmosphere.-- Under a Creative Commons license BY-NC 4.0., Figure S1. Cyclic CO2 capture and hydrogenation at 250 ºC for the different catalysts: (a) Na-Ni/Al; (b) K-Ni/Al; (c) Ba-Ni/Al. Figure S2. Cyclic CO2 capture and hydrogenation at 350 ºC for the different catalysts: (a) Na-Ni/Al; (b) K-Ni/Al; (c) Ba-Ni/Al. Figure S3. Cyclic CO2 capture and hydrogenation at 400 ºC for the different catalysts: (a) Na-Ni/Al; (b) K-Ni/Al; (c) Ba-Ni/Al. Figure S4. Cyclic CO2 capture and hydrogenation at 450 ºC for the different catalysts: (a) Na-Ni/Al; (b) K-Ni/Al; (c) Ba-Ni/Al. Figure S5. produced CH4 (a) and CO (b) and released CO2 (c) within 100 s upon H2 admission at 250 ºC. Figure S6. Produced CH4 (a) and CO (b) and released CO2 (c) within 100 s upon H2 admission at 300 ºC. Figure S7. Produced CH4 (a) and CO (b) and released CO2 (c) within 100 s upon H2 admission at 350 ºC. Figure S8. Produced CH4 (a) and CO (b) and released CO2 (c) within 100 s upon H2 admission at 400 ºC. Figure S9. Produced CH4 (a) and CO (b) and released CO2 (c) within 100 s upon H2 admission at 450 ºC. Figure S10. HAADF-STEM images (a,c,e) and particle size distribution (b,d,f) of DFMs: (a,b) K-Ni/al; (c,d) Na-Ni/Al; (e,f) Ba-Ni/Al. Figure S11. Cyclic CO2 capture and hydrogenation at 350 ºC for the different catalysts using feed B (5% CO2, 11% H2O, 4.5% O2 in Ar): (a) K-Ni/Al; (b) Na-Ni/Al; (c) Ba-Ni/Al. Figure S12. Comparison of productivity switching the composition of the capture gas between feed A (5% CO2 in Ar), feed B (5% CO2, 11% H2O, 4.5% O2 in Ar) and feed A again. (a) cyclic CH4 productivity with feed B;Figure S13. Temperature programmed reaction of 15%Ni on alumina. Fitting of Ni 2p3/2: Table S1. Result of the Fitting of Ni 2p3/2 peaks for Ba-Ni. Table S2. Result of the Fitting of Ni 2p3/2 peaks for K-Ni. Table S3. Result of the Fitting of Ni 2p3/2 peaks for Na-Ni. Fitting of C 1s: Table S4. Result of the Fitting of C1s peaks for Ba-Ni. Table S5. Result of the Fitting of C1s and K2p peaks for K-Ni. Table S4. Result of the Fitting of C1s peaks for Na-Ni. XPS alkaline: Figure S14. Fitting of XPS Na 1s peak for Na-Ni/Al after passivation, after CO2 capture at 350 ºC and this latter material reduced in-situ at 250 ºC and 350 ºC. Figure S15. Fitting of XPS Ba 3d5/2 peak for Ba-Ni/Al after passivation, after CO2 capture at 350 ºC and this latter material reduced in-situ at 250 ºC and 350 ºC., The authors are very grateful to the Grants PID2020-119160RB-C21 and -C22 funded by MCIN/AEI/10.13039/501100011033 and Aragón Government (Aragón T03_20R), and associated EU Regional Development Funds are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

MOPREDAScentury: a long-term monthly precipitation grid for the Spanish mainland

  • Beguería, Santiago
  • Peña-Angulo, Dhais
  • Trullenque Blanco, Víctor
  • González-Hidalgo, José Carlos
29 Pags.-, 24 Figs.- 15 Tabls. © Author(s) 2023. This work is distributed under the Creative Commons Attribution 4.0 License., This article describes the development of a monthly precipitation dataset for the Spanish mainland, covering the period between December 1915 and December 2020. The dataset combines ground observational data from the National Climate Data Bank (NCDB) of the Spanish meteorological service (AEMET) and new data rescued from meteorological yearbooks published prior to 1951 that were never incorporated into the NCDB. The yearbooks’ data represented a significant improvement of the dataset, as it almost doubled the number of weather stations available during the first decades of the 20th century, the period when the data were more scarce. The final dataset contains records from 11 312 stations, although the number of stations with data in a given month varies largely between 674 in 1939 and a maximum of 5234 in 1975. Spatial interpolation was used on the resulting dataset to create monthly precipitation grids. The process involved a two-stage process: estimation of the probability of zero precipitation (dry month) and estimation of precipitation magnitude. Interpolation was carried out using universal kriging, using anomalies (ratios with respect to the 1961–2000 monthly climatology) as dependent variables and several geographic variates as independent variables. Cross-validation results showed that the resulting grids are spatially and temporally unbiased, although the mean error and the variance deflation effect are highest during the first decades of the 20th century, when the observational data were more scarce. The dataset is available at https://doi.org/10.20350/digitalCSIC/15136 under an open license and can be cited as Beguería et al. (2023)., . This research has been supported by research grants PID2020-116860RB-C22, CGL2017-83866-C1-3-R, and CGL2017-83866-C3-3-R by the Spanish Ministry of Science and Innovation and by the European Commission – NextGenerationEU (Regulation EU 2020/2094), through CSIC’s Interdisciplinary Thematic Platform Clima (PTI Clima)/Development of Operational Climate Services., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

MOSSAIC: MOSS Analysis Image Collection

  • Molina-Bustamante, Manuel
  • Castro, Indradatta de
  • Ronquillo, Cristina
  • Hurtado, Fernando
  • Leo, María
  • Estébanez, Belén
  • Hortal, Joaquín
  • Santos, Ana Margarida C.
  • Medina, Nagore G.
[Material and methods] In this experiment six ground moss species were utilized. • Ptychostomum capillare (Hedw.) D.T. Holyoak & N. Pedersen [== Bryum capillare Hedw.] • Dicranum scoparium Hedw. • Homalothecium aureum H. Rob. • Hypnum cupressiforme Hedw. • Tortella squarrosa (Brid.) Limpr. [== Pleurochaete squarrosa (Brid.) Lindb.] • Syntrichia ruralis (Hedw.) F. Weber & D. Moh. For the moss stand inoculation, seedbed pots with synthetic wadding as the growth substrate were used. The experimental units were placed in three different locations along a 100-kilometer altitudinal gradient in Central Spain, specifically at: • Estación Biológica “El Ventorrillo” (VENT), Madrid, Spain (1482 meters above sea level - m.a.s.l.) • Universidad Autónoma de Madrid (UAM), Madrid, Spain (717 m.a.s.l.) • Finca Experimental “La Higueruela” (HIG), Toledo, Spain (455 m.a.s.l.) The pictures were captured using two Mapir Survey 2 cameras (https://www.mapir.camera/). One camera had an RGB sensor for visual wavelengths, while the other had a Red + NIR sensor for near-infrared. The manufacturer adjusted the focal distance to approximately 25 cm from the samples. Both cameras were equipped with a 16MP Sony Exmor IMX206 sensor, featuring a Bayer RGB pattern. The red absorption occurred at 660 nm, and near-infrared was captured at 850 nm. We employed a transparent plastic light diffuser box with an interior lining of white paper, such as filter paper. This setup served to even out the lighting and reduce the appearance of harsh shadows. Each image included the samples, a colour chart (specifically, the X-Rite ColorChecker® Classic) for calibration, as detailed in prior works (Ritchie et al., 2008; Fischer et al., 2012), and a millimetre scale for calculating the pixel-to-millimetre ratio. Moss samples were labelled in each hollow. The cameras saved the images in raw format and we converted it to tif format without compression using Darktable 2.6.1 software (https://www.darktable.org/) (‘Darktable’, 2019). Then we used ImageJ software (Schindelin et al., 2012) to align each pair of NIR-VIS images and to homogenize colour histograms for each VIS and NIR image series in each locality. The ImageJ scripts are provided by Photomoss protocol (Molina-Bustamante et al., 2022)., This dataset contains a set of images that display moss samples from six distinct species over seedling trays from a common garden experimental set-up. We grow these moss samples on a background of white synthetic material. The capture of the images was in both near-infrared and visible light wavelengths. We provide additional files to fit the main dataset objective: use it as a test platform for evaluating the PhotomossR package. In this repository, you will discover images taken in both the near-infrared and visible light spectrums. These images offer comprehensive data for testing different spectral indices using the PhotomossR package (Molina-Bustamante, DeCastro-Arrazola, Doherty, & Medina, 2022)., This work is part of the projects UNITED (CGL2016-78070-P, funded by Spanish Agencia Estatal de Investigación [AEI] and Fondo Europeo de Desarrollo Regional [FEDER] European Union) and SCENIC (PID2019-106840GA-C21 and PID2019-106840GA-C22, funded by Spanish Ministerio de Ciencia e Innovación [MCIN] and AEI), M. M-B was funded by the Comunidad de Madrid, and the European Social Fund that co-financed through the Youth Employment Operational Program and the Youth Employment Initiative (YEI) grant PEJ-2017-AI/AMB-6504., Contains 5 folders based on the locality and date of image capture. Within each locality folder, there are 4 subfolders (nir, vis, rois, mask) and a 'names.csv' file that provides label names for the samples. • "nir" folder with images in the infrared spectrum. Images named by the date of capture. • "vis" folder with images in the visible spectrum. Images named by the date of capture. • "rois" folder that includes roi files. Inside this folder, there are as many subfolders as images in “nir” and “vis” folders. Each subfolder containing the roi files corresponding to the samples we want to analyse in each of the images. • "mask" folder with binary images of moss samples. Files are numerically named.in the order PhotomossR will analyse it., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Data set for "Optimal wave reflection as mechanism for seagrass self-organization"

  • van de Vijsel, Roeland C.
  • Hernández-García, Emilio
  • Orfila, Alejandro
  • Gomila, Damià
All methodological information is in the paper "Optimal wave reflection as mechanism for seagrass self-organization" by Roeland C. van de Vijsel, Emilio Hernández-García, Alejandro Orfila, Damià Gomila to appear in Scientific Reports., Whenever you use any part of the data (scripts, figures, raw and processed data) described in this README-file, please make sure to correctly refer to this dataset, the manuscript described above and its authors., Full data set used for the following manuscript: Optimal wave reflection as mechanism for seagrass self-organization by R.C. van de Vijsel, E. Hernández-García, A. Orfila, D. Gomila, to appear in Scientific Reports (2023). The data set contains all the necessary codes and simulation and raw data to reproduce the results discussed in the associated manuscript. Folder "Figure scripts" contains the Matlab codes and associate raw data to generates all the figures of the manuscript. Folder "v28" contains the Matlab scripts that calculate uniform basic state for a given set of model parameters and numerically time-integrate the perturbation equations. It also contains all simulation results and figures, generated with the above Matlab scripts. Folders "v33" to "v39" contain variations of the codes in "v28"., Project CYCLE (PID2021-123723OB-C22) funded by MCIN/AEI/10.13039/501100011033 and ERDF “A way of making Europe”; María de Maeztu project CEX2021-001164-M618 funded by the MCIN/AEI/10.13039/501100011033; European Union’s Horizon 2020 research and innovation programme (Grant agreement ID: 101093910, Ocean Citizen). Project LAMARCA (PID2021-123352OB-C31 and PID2021-123352OB-C32) funded by MICIN/AEI621/FEDER, UE; Project Tech2Coast (TED2021-130949B-I00) funded by MCIN/AEI,EU “NextGenerationEU/PRTR”., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001164-M618)., Please, see data_description.pdf file., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset of Operando Exploration of Tribochemical Decomposition in Synthetic FeS2 thin film and Mineral Iron Pyrite

  • Muñoz-Cortés, Esmeralda
  • Sánchez-Prieto, Jesús
  • Zabala, Borja
  • Sánchez, Carlos
  • Flores, Eduardo
  • Flores, Araceli
  • Román García, Elisa Leonor
  • Ares, José R.
  • Nevshupa, Roman
FeS2 thin films were obtained by sulfuration of Fe coatings, which were deposited by thermal evaporation of iron powder (Goodfellow, 99.99%) on soda lime glass substrates under high vacuum. The initial thickness of the Fe coatings was 300±20 nm as measured using quartz crystal microbalance. The Fe coating was transferred into a glass ampoule, which contained a small amount of sulfur powder (Merck, 99.99%) placed at one end. The ampoule was evacuated down to 10-5 mbar and sealed. Then, sulfur was sublimated by heating to 300ºC for 20 h, while sulfur vapour at a pressure of about 0.065 bar reacted with the Fe film. After sulfuration, the coatings were kept in the same sealed ampoules at room temperature until they were characterized. Natural pyrite was used to contrast the results obtained for artificial FeS2 thin film. A sheet of iron pyrite was cut from a native crystal proceeding from Peru mines and polished. X-ray diffraction analysis showed a typical cubic crystal structure of the mineral sample. The iron coatings' crystal structure was analyzed both before and after sulfuration using grazing-angle X-ray diffraction (XRD). This was accomplished by employing Cu Kα radiation and maintaining a fixed incidence angle of 1.7°. To determine the mean crystallite size, the Scherrer formalism was applied to the main diffraction band (200). Film thickness measurements were conducted at the film edge utilizing a stylus profilometer, achieving an accuracy of 10 nm. The mechanical properties of the FeS2 coatings were investigated through nanoindentation (G200, KLA Corp.), utilizing a Berkovich diamond tip in dynamic contact mode. The maximum indentation depth was 100 nm constrained to remain below 10% of the total coating thickness. The loading cycle was carried out at a constant indentation strain rate of 0.1 s-1 and a small oscillating force was superimposed to this loading ramp (75 Hz of frequency, amplitude of 2 nm). Continuous measurement of the contact stiffness was achieved on the basis of the phase lag between the sinusoidal force and the penetration produced. X-ray Photoemission Spectrometry (XPS) was used to obtain information on chemical state of various elements under ultra-high vacuum (UHV) with a pressure below 10-8 Pa. Mg Kα radiation with an energy of 1253.6 eV was employed. To eliminate any airborne adsorbed contaminants from the sample surface, ensuring a pristine surface for subsequent XPS analysis, the samples underwent Ar+ ion sputtering with an energy of 1 keV and an incident angle of 60° with respect to the sample normal. The sputtering depth was around 1.3 Å. It should be noted that Ar+ ions for sputtering can potentially alter the chemical oxidation state of Fe and/or S and/or change the surface composition due to preferential sputtering. No additional treatment was performed. High-resolution XPS analysis of Fe 2p, S 2p, O 1s, and C 1s was conducted through the fitting process employing the minimum possible number of components compatible with the expected chemistry. For instance, both the Fe 2p3/2 and Fe 2 p1/2 spin-orbit peaks were fitted to ensure the coherence of the procedure, while assuming a Shirley background. For the sake of simplicity, only the Fe 2p3/2 bands are discussed here. The S 2p peak was fitted employing a S 2p3/2 S 2p1/2 doublet, considering the theoretical spin-orbit coupling ratio of 1:2. A fixed separation of 1.2 eV between the S 2p3/2 and S 2p1/2 was maintained based on literature for data processing., Electron Stimulated Desorption (ESD) coupled with mass spectrometry was used to examine the chemical composition of the adsorbed layers and the surface chemical groups. The sample was bombarded with electrons using an electron gun positioned at a 60° angle to the surface normal. Unless otherwise mentioned, the electron energy used was 600 eV. The ions, which were generated on the surface due to electron bombardment, released from the sample and were detected using a quadrupole mass spectrometer, situated in front of the sample. More details about the setup and process of the ESD experimental system can be found elsewhere. Thermal Gravimetric analysis of thin films was used to analyse the gases emitted during progressive heating under both Ar and dry air flows using a mass spectrometer. The rate of linear heating was set at 5, 10, and 20 °C/min. The emitted gases were analysed in the range of 1-90 a.m.u. The Rutherford Backscattering Spectrometry (RBS) and Elastic Recoil Detection Analysis (ERDA) techniques, available at the Centre of Microanalysis of Materials of Autonomous University of Madrid, were employed to determine the elemental composition of the sample surfaces. Its 5MV linear tandem accelerator facility provides the ion beams to carry out the characterization with these techniques. In this study, a collimated He+ beam with energies of 3.035 or 4.260 MeV extracted from the accelerator was used, while choice of these energies’ values justified under resonant conditions for oxygen and carbon respectively. For RBS analysis, the backscattered ions were detected at an angle of 170° with respect to the direction of the incident ion beam. In the case of ERDA, the ions were directed to the surface at an incident angle of 75° with respect to the surface normal. Recoiled particles were collected at 30°. To filter out heavier ions, a 19 µm thick mylar film was placed in front of the detector to obtain the hydrogen depth profile. The total ion dose in each measurement was set to 15 µC with a particle flux of 5.5x1012 cm-2 s-1 and a probe size of 1.5x1.5 mm2. The spectra were taken with the samples at random orientations. For energy-to-depth conversion, common SRIM (Stopping and Range of Ions in Matter) energy loss data were used, along with reference samples of MgH2 Er-doped TiO2 coatings. The RBS-ERDA spectra were fitted using SIMNRA simulation software. The gases emitted during mechanical activation of the materials were analysed using an original UHV experimental system equipped with a quadrupole mass spectrometer (Hiden HALO), a reciprocating motion UHV-grade friction cell, and a dynamic gas expansion system. Such a configuration allows accurate quantification of minute emission rates down to 1 pmol s-1. The samples were rubbed under UHV using alumina spheres, 3 mm in diameter. The rubbing conditions, unless otherwise stated, were as follows: the normal load of 0.44 N, the frequency of reciprocating motion of 1 s-1, and the mean rubbing velocity of 0.18 m s-1. The experimental system is schematically shown in Figure 1 and described in detail elsewhere. Before the tests, the alumina spheres were thoroughly degreased consecutively in acetone and isopropanol ultrasonic baths. After drying, they were submerged in a hot Piranha solution to remove carbon and metal residues, rinsed with ultrapure water, and dried in an N2 stream. The differential mass spectra (DMS) were derived by subtracting the mean steady background mass spectra from the mean mass spectra recorded during the application of the mechanical stimulus. Only statistically significant changes (α=0.05) in DMS were analysed among the channels within the 1 – 100 a.m.u. range. To ensure comparability, the mass spectra were normalized by dividing by the total ion current in each spectrum. The tentative identification of ion species was based on reference cracking patterns from the NIST Webbook (NIST Webbook). The gas composition was determined through a backward stepwise regression method, in which we utilized reference mass spectra of various potential gas precursors. These spectra were fitted in various combinations to the experimental DMS with the aim of identifying the combination that included the fewest precursors and achieved a high R2adj value. Behavioural analysis (BA) was employed to develop better understanding of the mechanisms of underlying tribochemical processes. BA allows to explore the short- and long-term trends of highly dynamic emission time series, to establish the degree of correlation between the mass spectrometer signals, and to trace them back to the possible emission sources in the mechanically affected bulk material and/or on the mechanically affected surfaces. Chemical changes in the Mechanically Affected Zones (MAZ) were studied using vibrational spectroscopy (Raman and FTIR). All the results were benchmarked against the spectra obtained from neighbouring pristine surfaces. Raman spectra were measured using a 532 nm laser in air. Infrared micro-reflectance spectra were obtained using a micro-FTIR spectrometer., Datasets of mass-spectrometry signals were obtained in the experiments with non-thermal tribochemical decomposition of synthetic thin-film iron sulphide and mineral iron pyrite. Tribochemical reactions were studied on a micrometre scale using localized rubbing under ultrahigh vacuum. Mechanically Stimulated Gas Emission Mass-Spectrometry (MSGE-MS) including the Dynamic gas expansion method was used to determine the kinetic parameters of gas emission and the composition of the emitted gases. The study was complemented by structural, morphological, tribological, mechanical and surface analyses. It was found that carbon-containing gases were dominating. The sulfur-containing gases comprised H2S, COS and CS2. The latter two were unexpected. The emission of these gases was traced back to solid-state chemical reactions kinetically controlled by the precursor concentrations and driven through non-thermal mechanisms, which we tentatively assigned to formation of sulfur radicals., This study was co-funded by Spanish Ministry for Science and Innovation (grants PID2019-111063RB-I00, PID2020-112770RB-C22, PID2020-117573GB-I00, RTI2018-099794-B-I00, and TED2021-129950B-I00) and funding from Madrid Community (project S2018/NMT-4291 TEC2SPACE), Ministry of Science and Innovation of Spain (project CSIC13-4E-1794) and EU (FEDER, FSE)., 1. Dataset of mass-spectrometry time series of mechanically stimulated gas emission from sodium alanate (NaAlH4) pellets under vacuum.-- 2. Dataset of Thermal Programmed Desorption – Mass-Spectrometry (TPD-MS) analysis of sodium alanate.-- 3. Dataset of X-ray diffraction of sodium alanate.-- 4. Dataset of micro-FTIR spectra of pristine and mechanically activated surfaces of pellets of sodium alanate.-- 5. Dataset of Raman spectra measured on the surfaces of pellets of sodium alanate., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Appendix A. Supplementary data for Bifunctional TiCo electrocatalysts based on N-doped graphene cryogels for the oxygen evolution and reduction reactions [Dataset]

  • Luque-Centeno, José Manuel
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Baglio, Vincenzo
  • Lázaro Elorri, María Jesús
Under a Creative Commons license BY 4.0 deed., Table S1. Raman shift (cm-1) of the G, D, D’ and D’’ from Raman spectra deconvolution and ID/IG intensity ratio. Table S2. Surface carbon, oxygen, nitrogen, cobalt and titanium contents and C/N, Co/N and Ti/N ratios calculated by XPS of the electrocatalysts and the relative content (%) of the deconvoluted peaks for N1s, Co2p and Ti2p. Figure S1. High-resolution C1s core level of NGC, Ti/NGC, Co/NGC and TiCo/NGC composites. Figure S2. LSV at 0.005 V s−1 in an O2-saturated 0.1 M NaOH solution, recorded using different electrode rotating rates indicated in the legend (rpm). (A) NGC, (B) Ti/NGC, (C) Co/NGC, (D) TiCo/NGC. Figure S3. Koutecky−Levich diagrams obtained between 0.3 and 0.56 V vs RHE for each composite. (A) NGC, (B) Ti/NGC, (C) Co/NGC, (D) TiCo/NGC. Figure S4. Koutecky−Levich diagrams obtained between 0.6 and 0.78 V vs RHE for each composite. (A) NGC, (B) Ti/NGC, (C) Co/NGC, (D) TiCo/NGC., The authors wish to acknowledge the grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033, and the Spanish National Research Council (CSIC) through the i-LINK + Programme (i-LINK1106)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

MOPREDAScentury: a long-term monthly precipitation grid for the Spanish mainland v.1.1.0 [Dataset], MOPREDAScentury_PP_1916-2020

  • Beguería, Santiago
  • Peña-Angulo, Dhais
  • Trullenque Blanco, Víctor
  • González-Hidalgo, José Carlos
[ES] Dos archivos en formato .csv ('Infogeo_Spain10.csv' y 'MOPREDAScentury_PP_1916-2020.csv'). El primero de ellos contiene los metadatos de los puntos del grid, la primera columna es el ID (Point), la segunda es la latitud (lon), la tercera es la latitud (lat) y la cuarta es la elevación del punto respecto al nivel del mar (alt.). En el segundo archivo queda recogida la información climática, en la primera columna queda recogido el ID (Point), en la segunda el año al que van referidos los datos (Year) y las 12 columnas siguientes se muestran las precipitaciones acumuladas a nivel mensual de enero a diciembre (Jan a Dec) y expresadas en décimas de mm. [EN] Two files in .csv format ('Infogeo_Spain10.csv' and 'MOPREDAScentury_PP_1916-2020.csv'). The first one contains the metadata of the grid points, the first column is the ID (Point), the second is the latitude (lon), the third is the latitude (lat) and the fourth is the elevation of the point with respect to sea level (alt.). In the second file the climatic information is collected, in the first column is the ID (Point), in the second column the year to which the data refer (Year) and the following 12 columns show the accumulated precipitation at monthly level from January to December (Jan to Dec) and expressed in tenths of mm., [EN] A monthly precipitation gridded data set over mainland Spain between December 1915 and December 2020. The dataset combines ground observations from the National Climate Data Bank (NCDB) of the Spanish national climate and weather service (AEMET) and new data rescued from meteorological yearbooks published prior to 1951 that was never incorporated into the NCDB. The yearbooks data represented a significant improvement of the dataset, as it almost doubled the number of weather stations available during the first decades of the 20th century, the period when the dataset was more scarce. The final dataset contains records from 11,312 stations. Spatial interpolation was performed using geostatistical techniques over a regular 0.1° × 0.1° km grid, using a two-stage process: estimation of the probability of zero-precipitation (dry month), and estimation of precipitation magnitude., [ES] Conjunto de datos en rejilla de precipitación mensual en la España peninsular, entre diciembre de 1915 y diciembre de 2020. El conjunto de datos utilizado combina observaciones del Banco Nacional de Datos de AEMET y nuevos datos rescatados de los anuarios climáticos publicados con anterioridad a 1951, y que casi duplican la información existente sobre la primera mitad del siglo 20. El conjunto final contiene información de un total de 11.312 observatorios. Se utilizaron técnicas geoestadísticas para interpolar espacialmente las observaciones sobre una rejilla regular de 0.1° × 0.1°, utilizando un proceso en dos pasos: en primer lugar se interpoló la probabilidad de mes seco (precipitación igual a cero), y en un segundo paso la magnitud de la precipitación., Projects CGL2017-83866-C3-3-R (CLICES: Climate of the last Century in the Spanish mainland) and PID2020-116860RB-C22 EXE: Extremos térmicos y pluviométricos en la España peninsular 1916-2020), funded by the Spanish Ministry of Science., Infofile, grid., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Data from airborne hyperspectral and Sentinel imagery to quantify winter wheat traits through ensemble modeling approaches

  • Quemada, Miguel
  • Camino, Carlos
  • Pancorbo, J. L.
  • Raya-Sereno, María D.
  • Zarco-Tejada, Pablo J.
  • Alonso-Ayuso, María
  • Gabriel, José Luis
[Detailed description] The file ‘dataset_crop_VIs.xlsx’ contains treatment factors, agronomic variables of wheat at flowering and harvest (aboveground biomass dry weight, N concentration, yield and others defined in the key spreadsheet), vegetation indices calculated from the hyperspectral airborne imagery, water deficit index, vegetation indices calculated from Sentinel-2 satellite imagery, solar induce fluorescence and Sentinel-2 bands convolved with the hyperspectral airborne information. The file “airborne_reflectance_1nm.xlsx” contains treatment factors and the average spectra of each plot resampled to 1 nm measured extracted from the airborne hyperspectral imagery acquired in two different dates., [Value of the data] The present dataset could help researchers and farmers to identify suitable genotypes and their responses to nitrogen and water stress. +The original images used are available under request to the authors. More detailed information about the dataset and methodology can be found in the article entitled “Airborne hyperspectral and Sentinel imagery to quantify winter wheat traits through ensemble modeling approaches” published in Precision Agriculture by Pancorbo et al. in 2023., The dataset includes agronomical, spectral and thermal information derived from a field experiment sowed with winter wheat (Triticum aestivum L.) at La Chimenea farm station (40º04’N, 03º32’W, 550 m a.s.l.), near Aranjuez (Madrid, Spain) during two consecutive growing seasons: 2017/2018 and 2018/2019. Each year, it was established 32 plots that were randomly divided into 4 N levels (N0, N1, N2, N3) and two water levels (w1 and W2) with four replications. The N levels ranged from non-fertilized (N0) to over-fertilized (N3). The two water levels were established at the beginning of flowering by irrigating half of the plots (W2). Spectral and thermal measurements were collected from a hyperspectral and a thermal sensors onboard an aircraft. The hyperspectral imager covering the VNIR region (Hyperspec VNIR model, Headwall Photonics, Fitchburg, MA, USA) captured the reflected light between 400 and 850 nm., Ministerio de Economía e Innovación, España. Ref.PID2021-124041OB-C21/22; PRE2018-084215; AGL2017-83283-C2-1-R. Ministerio de Educación, España. Ref. FPU17/01251. Comunidad de Madrid. Ref. AGRISOST-CM S2018/BAA-4330. Structural Funds 2014-2020 (ERDF and ESF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Strong light-matter coupling in lead halide perovskite quantum dot solids [Dataset]

  • Bujalance, Clara
  • Calió, Laura
  • Dirin, Dmitry N.
  • Tiede, David O.
  • Galisteo-López, Juan F.
  • Feist, Johannes
  • García-Vidal, Francisco J.
  • Kovalenko, Maksym V.
  • Míguez, Hernán
Strong coupling between lead halide perovskite materials and optical resonators enables both the polaritonic control of the photophysical properties of these emerging semiconductors and the observation of novel fundamental physical phenomena. However, the difficulty to achieve optical-quality perovskite quantum dot (PQD) films showing well-defined excitonic transitions has prevented the study of strong light-matter coupling in these materials, central to the field of optoelectronics. Herein we demonstrate the formation at room temperature of multiple cavity exciton-polaritons in metallic resonators embedding highly transparent Cesium Lead Bromide quantum dot (CsPbBr3-QD) solids, revealed by a significant reconfiguration of the absorption and emission properties of the system. Our results indicate that the effects of biexciton interaction or large polaron formation, frequently invoked to explain the properties of PQDs, are seemingly absent or compensated by other more conspicuous effects in the CsPbBr3-QD optical cavity. We observe that strong coupling enables a significant reduction of the photoemission linewidth, as well as the ultrafast modulation of the optical absorption, controllable by means of the excitation fluence. We find that the interplay of the polariton states with the large dark state reservoir play a decisive role in determining the dynamics of the emission and transient absorption properties of the hybridized light-quantum dot solid system. Our results open the route for the investigation of PQD solids as polaritonic optoelectronic materials., This project has received funding from the Spanish Ministry of Science and Innovation-Agencia Estatal de Investigación (MICIN-AEI) under grants PID2020-116593RB-I00 and TED2021-129679B-C22, funded by MCIN/AEI/ 10.13039/501100011033 and by Unión Europea NextGenerationEU/PRTR, by the Junta de Andalucía under grant P18-RT-2291 (FEDER/UE) and the Innovative Training Network (ITN) Persephone, funded by the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 956270. M. V. K. and D.D.; from the Air Force Office of Scientific Research and the Office of Naval Research (award number FA8655-21-1-7013); from the Spanish MICIN–AEI under grants PID2021-125894NB-I00 and CEX2018-000805-M (through the María de Maeztu program for Units of Excellence in Research and Development); from Junta de Andalucía and the European Regional Development Funds (EU-FEDER) under program (DOC_00220)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2018-000805-M)., Folder List: 1. Figure_1 - Figure1_d: Absorptance; PL (counts) dispersion QDs - Figure1_e: Absorptance; PL (counts) film QDs - Figure1_f: Absorptance cavity QDs 26º, 36º, 46º - Figure1_g: Absorptance; second derivative dispersion QDs - Figure1_h: Absorptance; second derivative film QDs - Figure1_i: Absorptance; second derivative cavity QDs 2. Figure_2 -Figure2_a_experimental_map_right: experimental dispersion A vs. k|| s-polarised -Figure2_a_theoretical_map_left: theoretical dispersion A vs. k|| s-polarised -Figure2_a_experimental_maxima: experimental A maxima s-polarised -Figure2_a_JCmodel: theoretical polaritonic dispersion from JC model s-polarised -Figure2_b_experimental_map_right: experimental dispersion A vs. k|| p-polarised -Figure2_b_theoretical_map_left: theoretical dispersion A vs. k|| p-polarised -Figure2_b_experimental_maxima: experimental A maxima p-polarised -Figure2_b_JCmodel: theoretical polaritonic dispersion from JC model p-polarised -Figure2_c: Hopfield coeffcients lower polariton -Figure2_d: Hopfield coeffcients middle polariton -Figure2_e: Hopfield coeffcients upper polariton 3. Figure_3 -Figure3_a: transient absorption map of the cavity vs. wavelength -Figure3_b: delta A at 0.4 and 10ps vs. wavelength -Figure3_c: |delta A| vs. time -Figure3_d: transient absorptance (delta A + A) of the cavity vs. wavelength -Figure3_e: deconvoluted delta A -Figure3_f: deconvoluted delta A + A -Figure3_g: dinamics of I_PIA, Area_overlap MP-LP, and energy splitting vs. time 4. Figure_4 -Figure4_a: PL of QDs film vs. angle of collection -Figure4_b: Pl of QDs cavity vs. angle of collection -Figure4_c: experimental dispersion A vs. k|| -Figure4_d: PL dispersion vs. k|| -Figure4_e_data: PL decay data vs.time of colloidal dispersion, film and cavity -Figure4_e_fits: lognormal fit of PL decay data vs.time -Figure4_f: distribution of decay rates, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Data Set for Active tectonics, Quaternary stress regime evolution and seismotectonic faults in southern central Hispaniola: implications for the quantitative seismic hazard assessment

  • Escuder Viruete, Javier
  • Fernández Rodríguez, Francisco José
  • Pérez Valera, Fernando
  • McDermott, Frank
[EN] These supporting information files provides a Figure with the graphic representation of the catalogue of earthquakes and focal mechanisms compiled for southern central Hispaniola (S1), a Table including the U-Th geochronological results of coral samples (S2), a Text describing the methodology of dynamic fault-slip analysis (S3), a Table describing the sites used to obtain stress tensors from the analysis of fault-slip data sets (S4), a Table including the stress tensors obtained by methods of inversion of fault-slip data (S5), and a Table showing the maximum horizontal stresses and tectonic regimes obtained by inversion methods (S6). Supporting Information S1. Catalogue of earthquakes and focal mechanisms compiled for southern central Hispaniola. Supporting Information S2. U-Th geochronological results of coral samples. Supporting Information S3. Methodology of dynamic fault-slip analysis. Supporting Information S4. Sites used to obtain stress tensors from the analysis of fault-slip data sets. Supporting Information S5. Stress tensors obtained by methods of inversion of fault-slip data. Supporting Information S6. Maximum horizontal stresses and tectonic regimes obtained by inversion methods., The research was funded through PID2019-105625RB-C22 project of the MCIN/AEI/10.13039/501100011033 of the Spanish Government. Some works also received funding from the DR-T 1190 Project of the Banco Interamericano de Desarrollo (World Bank) and the FONDOCYT project 2015-1b3-118 of the MESCyT of the Dominican Republic Government., These supporting information files provides a Figure with the graphic representation of the catalogue of earthquakes and focal mechanisms compiled for southern central Hispaniola (S1), a Table including the U-Th geochronological results of coral samples (S2), a Text describing the methodology of dynamic fault-slip analysis (S3), a Table describing the sites used to obtain stress tensors from the analysis of fault-slip data sets (S4), a Table including the stress tensors obtained by methods of inversion of fault-slip data (S5), and a Table showing the maximum horizontal stresses and tectonic regimes obtained by inversion methods (S6). Figuras, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

The structure and ecological function of the interactions between plants and arbuscular mycorrhizal fungi through multilayer networks [Dataset]

  • Garrido Sánchez, José Luis
  • Alcántara, Julio M.
  • López García, Álvaro
  • Ozuna, Carmen
  • Perea, Antonio J.
  • Prieto-Rubio, Jorge
  • Rincón, Ana
  • Azcón González de Aguilar, Concepción
Description of the data and file structure: pamf.jaen.csv: Plant-AMF interaction matrix of Jaén. It represents number of samples of a given plant species in which a certain VT appears, relative to the total number of samples of that species at each sampling site in Jaén.-- pamf.segura.csv: Plant-AMF interaction matrix of Segura. It represents number of samples of a given plant species in which a certain VT appears, relative to the total number of samples of that species at each sampling site in Segura.-- rec.jaen.csv: Plant-plant interaction matrix (i.e. Recruitment matrix) of Jaén. It represents the recruitment frequency in Jaén, i.e. number of individuals of a given plant species recruiting beneath a given canopy plant in Jaén.-- rec.segura.csv: Plant-plant interaction matrix (i.e. Recruitment matrix) of Segura. It represents the recruitment frequency in Segura, i.e. number of individuals of a given plant species recruiting beneath a given canopy plant in Segura.-- ASV_VT.xlsx: List of Amplicon Sequence Variants (ASV) and their corresponding Virtual Taxa (VT) assignment by blasting against MaarjAM database. First four columns show genebank accession numbers, ASV ID, VT assigment and the used representative ASV per VT. Seven last columns show blast results against MaarjAM database.-- VT_table.csv: Number of reads of the VTs analysed across samples., 1. Arbuscular mycorrhizas are one of the most frequent mutualisms in terrestrial ecosystems. Although studies on plant mutualistic interaction networks suggest that they may leave their imprint on plant community structure and dynamics, this has not been explicitly assessed. Thus, in the context of plant-fungi interactions, studies explicitly linking plant-mycorrhizal fungi interaction networks with key ecological functions of plant communities, such as recruitment, are lacking., 2. In this study, we analyse, in two Mediterranean forest communities of southern Iberian Peninsula, how plant-AMF networks modulate plant-plant recruitment interaction networks. We use a new approach integrating plant-AMF and plant recruitment networks into a single multilayer structure. We also develop a new metric (Interlayer Node Neighbourhood Integration, INNI) to explore the impact of a given node on the structure across layers., 3. Similarity of plant species in their AMF communities is positively related to the observed frequency of recruitment interactions in the field. Results reveal that properties of plant-AMF networks, such as plant degree and centrality, contribute to explaining properties of the plant recruitment network, such as in- and out-degree (i.e. sapling bank and canopy service) and its modular structure. However, these relationships differed between the two forest communities. Finally, we identify particular AMF that contribute to integrating the neighbourhood of recruitment interactions between plants., 4. This multilayer network approach is useful to explore the role of plant-AMF interactions on recruitment, a key ecosystem function enhanced by fungi. Results provide evidence that the complex structure of plant-AMF interactions impacts functional and structurally plant-plant interactions, which in turn may potentially influence plant community dynamics, through their effects on the structure of the recruitment network., Ministerio de Ciencia e Innovación, Award: CGL2015-69118-C2-2-P; Ministerio de Ciencia e Innovación, Award: PGC2018-100966-B-I00; European Commission, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

resPrf

  • Padullés, Ramon
  • Cardellach, Estel
  • Oliveras, Santiago
[Description of methods used for collection/generation of data] Polarimetric Radio Occultation measurement technique., The Polarimetric Radio Ocultation (PRO) Research Dataset (resPrf) provides the PRO observable Delta Phi as a function of height along with the corresponding standard RO wet thermodynamic profiles. The Delta Phi observable contained in this dataset is created from the processing of the H and V ports of the polarimetric antenna aboard PAZ, that provide information about precipitation and clouds encountered along the ray-paths. The thermodynamics is obtained from the merge of UCAR's atmPrf and wetPf2 level2 retrievals. The aim of the dataset is to foster the scientfic use of the PRO data, which provide unique simultaneous measurements of precipitation and the thermodynamics of the associated environment. In addition, the dataset provides detailed collocated information from independent precipitation sources, as well as radiances from the radiometers aboard the satellites in the Global Precipitation Mission (GPM) constellation. These collocated data are used for validation but also to provide the user with additional context on meteorological events., The creation of this dataset has been supported by the project PID2021-1264436OB-C22 funded by the MCIN/AEI (10.13039/501100011033) and the European Union “ERDF A way of making Europe”. Work performed at the ICE-CSIC was also partially supported by the program Unidad de Excelencia María de Maeztu CEX2020-001058-M., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2020-001058-M)., One file per observation. Approximately between 100-200 observations per day. The individual files are packed in daily zipped tar files. Upon unpacking, the individual files are placed in a folder named after the date., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary figures: Orai1α and Orai1β support calcium entry and mammosphere formation in breast cancer stem cells

  • Jardín, Isaac
  • Alvarado, Sandra
  • Jiménez-Velarde, Vanesa
  • Nieto-Felipe, Joel
  • López, José J.
  • Salido, Ginés M.
  • Smani, Tarik
  • Rosado, Juan A.
Supplementary figures: 1-3, Orai1 is the pore-forming subunit of the Ca2+-release activated Ca2+ channels that mediate store-operated Ca2+ entry (SOCE) in excitable and non-excitable cells. Two Orai1 forms have been identified in mammalian cells, the full-length variant Orai1α, and the short form Orai1β, lacking the N-terminal 63 amino acids. Stem cells were isolated from non-tumoral breast epithelial cells of the MCF10A cell line, and the most representative ER+ , HER2 or triple negative breast cancer cell lines MCF7, SKBR3 and MDA-MB-231, respectively. Orai and TRPC family members expression was detected by RT-PCR and Western blotting. Changes in cytosolic Ca2+ concentration were analyzed by confocal microscopy using Fluo 4 and the spheroid-forming ability and self-renewal was estimated in culture plates coated with pHEMA using a cell imaging system. Here, we have characterized the expression of Orai family members and several TRPC channels at the transcript level in breast stem cells (BSC) derived from the non-tumoral breast epithelial cell line MCF10A and breast cancer stem cells (BCSC) derived from the well-known estrogen receptor positive (ER+), HER2 and triple negative cell lines MCF7, SKBR3 and MDA-MB-231, respectively. Furthermore, we have evaluated the mammosphere formation efficiency and self-renewal of the BSC and BCSC. Next, through a combination of Orai1 knockdown by iRNA and the use of MDA-MB-231 KO cells, missing the native Orai1, transfected with plasmids encoding for either Orai1α or Orai1β, we show that Orai1 is essential for mammosphere formation and self-renewal efficiency in BCSC derived from triple negative and HER2 subtypes cell cultures, while this channel has a negligible effect in BCSC derived from ER+ cells as well as in non-tumoral BSC. Both, Orai1α, and Orai1β support SOCE in MDA-MB-231-derived BCSC with similar efficiency, as well as COX activation and mammosphere formation. These findings provide evidence of the functional role of Orai1α and Orai1β in spheroid forming efficiency and self-renewal in breast cancer stem cells., This research was supported by PID2019-104084 GB-C21, PID2019-104084 GB-C22 and PID2022-136279NB-C21 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, and Junta de Extremadura-Fondo Europeo de Desarrollo Regional (FEDER; Grant IB20007 and GR21008) to JAR. J.N.-F. and S.A. are supported by a contract from Ministry of Science, Innovation, and Universities, Spain and PID2019-104084 GB-C21 funded by MCIN/AEI/10.13039/501100011033, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Data for Dimensionality-driven metal-insulator transition in spin-orbit-coupled IrO2

  • Laguna-Marco, M. A.
  • Arias-Egido, Eduardo
  • Piquer, Cristina
  • Jiménez-Cavero, Pilar
  • Lucas, Irene
  • Gallego, Fernando
  • Rivera-Calzada, Alberto
  • Cabero-Piris, Mariona
  • Santamaría, Jacobo
  • Fabbris, Gilberto
  • Boada, Roberto
  • Proyecto: PID2020-115159GB-I00
All the experiments have been carried out on thin films of IrO2, the thickness and crystallinity of the each film being specified in each file. X-ray reflectivity (XRR) and X-ray diffraction measurements (XRD) were performed by using Bruker D8 and Rigaku D/max-2500 diffractometers, respectively, by using the Ka radiation line of copper. The electrical resistivity was measured using the four points van der Pauw method by means of a Quantum Design PPMS-9T with no applied magnetic field and with a small electric current (0.1 mA). Magnetization measurements were carried out by using a commercial SQUID magnetometer from Quantum Design. Magnetization versus temperature data were collected from 5 to 350 K with a heating rate of 5 K/min at 1000 Oe. High-energy resolution fluorescence detected X-ray absorption spectroscopy (HERFD-XANES) measurements were carried out at RT by using a beamline I20-Scanning at Diamond Light Source. More informacion can be found in https://doi.org/10.1107/S1600577518008974. X-ray magnetic circular dichroism (XMCD) measurements were carried out at beamline 4-ID-D of the Advanced Photon Source, Argonne National Laboratory. Measurements were done in a cryomagnet with the sample cooled with 4He vapor. A 500 micron thick diamond phase plate was used to generate circularly polarized X-rays and XMCD measurements were carried out in helicity-switching mode. Measurements were done in fluorescence mode using a grazing incidence geometry and an energy dispersive 4-element Si drift diode detector placed at 90 degrees relative to the incident beam direction. XMCD Data were collected at 10 K with the magnetic fields along and opposite the X-ray propagation direction to remove any artifacts of nonmagnetic origin., Spanish MINECO projects MAT2014-54425-R (MINECO/FEDER, UE), MAT2017-82970-C2-R (AEI/FEDER, UE), MAT2017-83468-R (AEI/FEDER,UE), MAT2017-87134-C02-01-R (AEI/FEDER, UE) and MAT2017-87134-C02-02-R (AEI/FEDER, UE); Spanish MICINN project PID2020-115159GB-I00 / AEI / 10.13039/501100011033; Aragon Regional Government (Projects No. E12-20R and E28-20R); European Union’s Horizon 2020 program Marie Sklodowska-Curie grant agreement no. 665919; European Union’s Horizon 2020 Programme project Quantox of QuantERA ERA-NET Cofund of Quantum Technologies (Grant Agreement No. 731473)., XRD_IrO2_001epitaxy.dat XRD_IrO2_100epitaxy.dat XRD_IrO2_110epitaxy.dat XRD_IrO2_110textured.dat AFM_2d2nm_thick_001epitaxy.tif STEM_5d7_nm_thick_001epitaxy.tif XAS_IrO2_001epitaxy_5d7nm.dat XAS_IrO2_001epitaxy_96nm.dat XAS_IrO2_100epitaxy_1d7nm.dat XAS_IrO2_100epitaxy_5d1nm.dat XAS_IrO2_100epitaxy_89nm.dat XAS_IrO2_110epitaxy_5d3nm.dat XAS_IrO2_110epitaxy_92d2nm.dat XAS_IrO2_polycrystalline_films resistivity_IrO2_ 001epitaxy.dat resistivity_IrO2_ 100epitaxy.dat resistivity_IrO2_ 110epitaxy.dat resistivity_IrO2_ 110texture.dat MvsT_IrO2_001epitaxy_1d5nmthick.dat MvsT_IrO2_100epitaxy_1d5nmthick.dat XAS_XMCD_IrO2_100epitaxy_1d5nmthick.dat XAS_XMCD_powderIrO2.dat XRR_IrO2_5nmthick.dat XRR_IrO2_100nmthick.dat XAS_polycrystalline_vs_amorphous.dat rockingcurves_IrO2.dat RSM_IrO2_001epitaxy_5d7nm.dat RSM_IrO2_001epitaxy_96nm.dat RSM_IrO2_100epitaxy_5d1nm.dat RSM_IrO2_100epitaxy_89nm.dat, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Experimental data files of manuscript A comparative study of vegetable flours as alternative protein sources of interest for food industry

  • Badia Olmos, Celia
  • Sentandreu, Miguel Ángel
  • Laguna, Laura
  • Tárrega, Amparo
  • Sentandreu, Enrique
LC-MS data files in .mgf format of bands listed in Table S1 and Table S2 of manuscript., IATA-CSIC (DESPEGA IATA-4 internal project); Spanish government MCIN/AEI for projects RTI2018-096162-R-C22 and PID2019-107723RB-C21 and Center of Excellence Accreditation Severo Ochoa (CEX2021-001189-S/MCIN/AEI/10.13039/501100011033), A-MGF_TableS1: LC-MS data files in .mgf format of bands (from 1 to 50) listed in Table S1; B-MGF_TableS2: LC-MS data files in .mgf format of bands (from 1 to 15) listed in Table S2, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

NEIGRA - North-East Iberian Granitoids Database. Geochemistry of granitoids and orthogneisses from the Pyrenees and the Catalan Coastal Ranges

  • González-Esvertit, Eloi
  • Canals, Ángels
  • Prieto-Torrell, Claudia
  • Bons, Paul Dirk
  • Llorens, Maria-Gema
  • Casas, Josep Maria
  • Aguilar, Carmen
  • Neilson, Joyce
  • Elburg, Marlina A.
  • Gomez-Rivas, Enrique
Geochemical data of the Variscan gneisses derived from pre-Variscan intrusives and late-Variscan granitoids in the Pyrenees and the Catalan Coastal Ranges were obtained from two main sources: (1) individually mined from published articles and unpublished PhD theses (Autran et al., 1970; Guitard, 1970; Enrique, 1989; Soler and Enrique, 1989; Enrique, 1990; Soler, 1990; Gleizes, 1992; Debon et al., 1996; Arranz, 1997; Guitard et al., 1998b, 1998b; Roberts et al., 2000; Vilà et al., 2005; Casas et al., 2010; Navidad et al., 2010; Druguet et al., 2014; Laumonier et al., 2015; Navidad et al., 2018; Lemirre et al., 2019; Álvaro et al., 2021; Liesa et al., 2021; Casas et al., 2024), and (2) the GEOROC Database (Geochemistry of Rocks of the Oceans and Continents, Göttingen University, https://georoc.eu/; last access: 03/2024; Lehnert et al., 2000). Other Findable, Accessible, Interoperable, and Reusable (FAIR; Wilkinson et al., 2016) databases were searched using geographic and lithogeochemical constrains, yielding no results. The mined data were curated and classified based on the analysed rock types, ages, regional tectonic setting, and mode of occurrence in outcrop, resulting in more than 600 entries that are associated with up to 66 data fields. Associated with each entry are generic, descriptive and informative fields (Sample ID, Unit/Massif, Rock category, Rock details, Outcrop description, and References), major element oxide abundances (SiO2, Al2O3, FeOT, Fe2O3T, MnO, MgO, CaO, Na2O, K2O, TiO2, P2O5, and LOI), and trace element concentrations (Ag, As, Ba, Be, Bi, Co, Cr, Cs, Cu, Ga, Ge, Hf, In, Mo, Nb, Ni, Pb, Rb, Sb, Sc, Sn, Sr, Ta, Th, Tl, U, V, W, Y, Zn, Zr, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, and Lu). The resulting database, named NEIGRA (North-East Iberian GRAnitoids), represents the first Open-Access compilation of granite and orthogneiss geochemical data in the Pyrenees and the Catalan Coastal Ranges., This work was funded by DGICYT Projects PID2021-122467NB-C22 and PID2021-125585NB-I00 (MCIN/AEI/FEDER-UE/10.13039/501100011033) and PID2020-118999GB-I00 (MCIN/AEI/10.13039/501100011033), and by the Sedimentary Geology Research Group (2021 SGR 00349). EGE acknowledges the funding provided by the Geological Society of London (GSL) Student Research Grants and the PhD grants funded by Generalitat de Catalunya and the European Social Fund (2021 FI_B 00165 and 2022 FI_B1 00043). CPT acknowledges the PhD grant 2021 FISDU 00347 funded by Generalitat de Catalunya. EGR acknowledges funding provided by the Spanish Ministry of Science, Innovation and Universities (“Ramón y Cajal” fellowship RYC2018-026335-I). CA is grateful to the GEOXis Reseach Group (2021 SGR 00262) and the projects PID2020-117332GB-C21 (USAL) and PID2020-117332GB-C22 (UCM) funded by MCIN/AEI/10.13039/501100011033., 00_NEIGRA_Readme; NEIGRA_North-East Iberian GRAnitoids Database, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset of Pollination effectiveness affects the level of generalisation of a plant species with phenotypically plastic flowers

  • Gómez Reyes, José M.
  • Navarro, Luis
  • González-Megías, Adela
  • Armas, Cristina
  • Perfectti, Francisco
  • Alcamar, Ángel
  • Sánchez, Raquel
[Description of methods used for collection/generation of data] Pollinator surveys, experimental determination of pollinator preference and effectiveness. [Methods for processing the data] R Statistical Software., The datasets include the information of the survays made during more than seven years in six populations of Moricandia arvensis (Brassicaceae) of the SE Spain during spring and summer (Dataset S1), the results of an experiment testing the preference of pollinators for both types of floral morphs of M. arvensis (spring floral morph and summer floral morph) done in field conditions both in spring and summer time (Dataset 2) and the results of an experiment testing the effectiveness of the pollinators of M. arvensis when visiting single flowers, both at the level of fruit production (Dataset 3) and seed production (Dataset 4)., Spanish Ministry of Science and Innovation (PID2021-126456NB, including EU FEDER funds), Junta de Andalucía (IE19_238 CSIC-EEZA) and LIFE4 Pollinators project (LIFE18 GIE/IT/000755), Dataset 1-4, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset of Exploring Tribochemical Transduction Pathways for Dehydrogenation of Molecular Hydrides

  • Muñoz-Cortés, Esmeralda
  • Leardini, Fabrice
  • Conte, Marcello
  • Campo, Ángel Adolfo del
  • Flores, Eduardo
  • Ares, José R.
  • Nevshupa, Roman
Cylindrical pellets 13 mm in diameter and ca. 2 mm thick were obtained by compacting, under uniaxial pressure of 65 MPa, of commercial powder of EDAB (Boron Specialties, 97% purity). The pellets were prepared and conserved under a static Ar atmosphere before and after the tests. X-ray diffraction (Cu Kα radiation, θ/2θ configuration, 10° - 60° 2θ range) was used to analyze the pellet structure. Thermal gravimetric analysis coupled with mass spectrometry (TGA-MS) under argon flow (heating rate: 10°C/min) was used to evaluate thermal stability and the composition of emitted gases. During the isothermal test the required temperature was attained at a heating rate 10 ºC/min and then maintained constant for 90-380 min depending on the temperature. The ion currents were measured in the range of mass-to-charge ratios from 1 to 90. Micro-Raman confocal spectrometry (incident laser: 532 nm, power: 5.6 mW) and FTIR microscopy was used to analyze the chemical structure of mechanically affected zones compared to pristine areas. It was conducted under normal atmosphere. In-plane thermal conductivity of EDAB pellets was determined using van der Pauw method. Nanoindentation with a Berkovich diamond tip (load: 5-20 mN, peak load hold time: 120 s, loading/unloading rates: 4-40 mN/min, 10 measurements for each load) was used to characterize mechanical properties. Tribochemical reactions under vacuum were studied in real time using Mechanically Stimulated Gas Emission Mass Spectrometry (MSGE-MS) which was described in detail elsewhere. This technique combines a mass-spectrometry, a nearly zero-emission ultrahigh vacuum friction cell and a dynamic gas expansion system. The latter allows for accurate quantification of emitted gas rates with the detection limit around 1 pmol/s. The tribostimulation of the pellets was done using an alumina ball, 3 mm in diameter, under normal load 0.44-1.1 N and the frequency of reciprocating motion 1 full cycle (forward and backward strokes) per second. The additional arrangements which were made to avoid undesirable gas emission sources other than triboemission from mechanically affected zones of the sample are described in ESI. The tribostimulated gas emission was determined from the mass-spectrometry signal and benchmarked against the steady background gas pressure with the indenter standing still. The Differential Mass-Spectra (DMS) were derived by subtracting the reference spectrum from the mass-spectra measured during tribostimulation. A separate experiment to investigate possible chemical changes in the EDAB under applied mechanical deformation was conducted using Nuclear Magnetic Resonance (NMR). For this experiment about 0.5 g of EDAB powder was grounded in a porcelain mortar just prior to the NMR analysis. A portion of the ground EDAB was analyzed using solid state Magic Angle Spinning (MAS) 1H and 11B NMR, while the other one was analyzed using 1H and 11B solution RMN using deuterated dimethyl sulfoxide (DMSO-d6) as a solvent., Datasets of mass-spectrometry signals were obtained in the experiments with non-thermal dehydrogenation of ethane 1,2-diamineborane through the application of mechanical energy. This study investigates whether the tribochemical approach can also be effective to release hydrogen from molecular hydrides such as ethane 1,2-diamineborane (EDAB). Surprisingly, despite dehydrogenating at a lower temperature than metal and complex hydrides, EDAB exhibited faint hydrogen release under mechanical stress. To understand this behavior, the tribochemical decomposition pathways of EDAB were investigated using operando Mechanically Stimulated Gas Emission Mass Spectrometry in combination with other surface and material characterization techniques. The lack of hydrogen emission from EDAB is attributed to a combination of strong intramolecular bonds (covalent and dative bonds) within the molecule, and weak intermolecular interactions (hydrogen bonds and van der Waals forces) between EDAB molecules., This study was co-funded by the Ministry of Science and Innovation of Spain (grants PID2019-111063RB-I00, PID2020-112770RB-C22, PID2020-117573GB-I00, RTI2018-099794-B-I00, and TED2021-129950B-I00)., 1.Dataset of mass-spectrometry time series of mechanically stimulated gas emission from ethane 1,2 dimineborane pellets under vacuum.-- 2. Dataset of Thermal Gravimetry – Mass-Spectrometry (TGA-MS) analysis of ethane 1,2 diamineborane.-- 3. Dataset of X-ray diffraction of ethane 1,2-diamineborane.-- 4. Dataset of micro-FTIR spectra of pristine and mechanically activated surfaces of pellets of ethane 1,2-diamineborane.-- 5. Dataset of Raman spectra measured on the surfaces of pellets of ethane 1,2-diamineborane.-- 6. Dataset of microindentation of pellets of ethane 1,2-diamineborane.-- 7. Dataset of friction force time-series measured during reciprocating rubbing of pellets of ethane 1,2-diamineborane under vacuum.-- 8. Dataset of Nuclear Magnetic Resonance (RMN EDAB) solid and liquid., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary Material to “Rapid immunochemical methods for the analysis of proquinazid in strawberry QuEChERS extracts”

  • Gimeno Alcañiz, José Vicente
  • Esteve Turrillas, Francesc A.
  • Abad Fuentes, Antonio
  • Agulló, Consuelo
  • Navarro Fuertes, Ismael
  • Abad Somovilla, Antonio
  • Mercader, Josep Vicent
Synthesis and structural characterization of intermediates ; --Structural characterization data of haptens and the corresponding active esters; --MALDI mass spectrometra of bioconjugates (Figs. S1-S3); --Immunoassay characterization (Fig. S4) ; --Influence of methanol and acetonitrile on the Amax and IC50 values of the selected d-cELISA and i-cELISA (Fig. S5); --Strawberry matrix effects over the selected d-cELISA and i-cELISA (Fig. S6) ; --Proquinazid contents found in blind strawberry samples extracted by QuEChERS (Table S1); --NMR spectra of the haptens and the corresponding N-hydoxysuccinimidyl esters, This document contains the structural characterization data of intermediates, haptens and the corresponding active esters. Additionally, the MALDI mass spectra of bioconjugates (Figs. S1-S3) are provided. Immunoassay characterization (Fig. S4), influence of methanol and acetonitrile on the Amax and IC50 values of the selected d-cELISA and i-cELISA (Fig. S5), and strawberry matrix effects over the selected d-cELISA and i-cELISA (Fig. S6). Moreover, data of proquinazid contents found in blind strawberry samples extracted by QuEChERS (Table S1) and the NMR spectra of the haptens and the corresponding N-hydoxysuccinimidyl esters are included., Funded by MCIU/AEI/10.13039/501100011033 [grant numbers PID2021-125721OB-C21/C22 and PDC2022-133559-C21/C22], and cofinanced by “ERDF A way of making Europe” and by the “European Union NextGenerationEU/PRTR”. The Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S also funded by MCIU/AEI/10.13039/501100011033 is fully acknowledged, With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Variable relationships between trait diversity and avian ecological functions in agroecosystems [Dataset]

  • Peña García, Rocío
  • Schleuning, Matthias
  • Miñarro, Marcos
  • García, Daniel
dataset: SeedDispersal_data_Pastures.csv: It contains data of the resource and forest cover availability, FDis and MPD standardized values for each frugivorous local assemblage, frugivorous bird abundances, and the dispersed seeds by birds, in different sampling plots in woodland pastures. Below we describe the contents of each column: plot_code: code for plot identity. year: sampling year. id_station: code for seed-trap identity. disp_seeds_m2: dispersed seeds/m2 Forest_cover: forest cover availability in each plot. Fruit_abundance: resource availability in each plot. FDis: Trait-based functional diversity estimated as the standardized Functional Dispersion in each local assemblage. Frug_abundance: abundance of all present frugivorous birds per plot. MPD: Phylogenetic Diversity estimated as the standardized Mean Pairwise Distance in each local assemblage., dataset: Insectivory_data_Pastures.csv: It contains data of the resource and forest cover availability, FDis and MPD standardized values for each insectivorous local assemblage, insectivorous bird abundances, and the dispersed seeds by frugivorous birds, in different sampling plots in woodland pastures. Below we describe the contents of each column: plot_code: code for plot identity year: sampling year tree_identity: code for focal tree identity. Attacked_success: pecked caterpillar. Intact_failure: intact caterpillar. n_models: number of caterpillar models placed on each focal tree. Forest_cover: forest cover availability in each plot. arthropod_g: resource availability in each plot. FDis: Trait-based functional diversity estimated as the standardized Functional Dispersion in each local assemblage. FI_bird_abundance: abundance of all forest insectivorous birds per plot. MPD: Phylogenetic Diversity estimated as the standardized Mean Pairwise Distance in each local assemblage., dataset: Insectivory_data_Orchards.csv: It contains data of the resource and forest cover availability, FDis and MPD standardized values for each insectivorous local assemblage, insectivorous bird abundance, and the dispersed seeds by frugivorous birds, in different sampling plots in apple orchards. Below we describe the contents of each column: plot_code: code for plot identity year: sampling year tree_identity: code for focal tree identity Attacked_success: pecked caterpillar Intact_failure: intact caterpillar n_models: number of caterpillar models placed on each focal tree Forest_cover: forest cover availability in each plot. arthropod_g: resource availability in each plot. FDis: Trait-based functional diversity estimated as the standardized Functional Dispersion in each local assemblage. FI_bird_abundance: abundance of all forest insectivorous birds per plot. MPD: Phylogenetic Diversity estimated as the standardized Mean Pairwise Distance in each local assemblage., 1) The diversity of traits within animal assemblages has been shown to affect the magnitude of animal-provided ecological functions. However, little is known about how consistent trait diversity effects are across ecological functions and ecosystems. More importantly, the importance of trait diversity in driving ecosystem functioning, relative to other components of biodiversity, has rarely been assessed. It also remains unclear how environmental gradients filter trait diversity and, ultimately, modulate ecological functions. 2) Here we test how different biodiversity components (i.e., trait diversity, phylogenetic diversity and abundance) affect the magnitude of avian seed dispersal and insect predation along large environmental gradients. We sampled frugivorous and insectivorous birds and their ecological functions across gradients of forest cover and fruit and insect abundances in woodland pastures and apple orchards in Northern Spain. We measured 6 morphological traits and compiled phylogenetic information on 43 bird species. We used Structural Equation Models to disentangle the effects of environmental gradients and biodiversity components on ecological functions. 3) We found that different avian functions in the same agroecosystem were controlled by different biodiversity components. While seed dispersal was positively driven by bird abundance in woodland pastures, insect predation responded positively to trait and phylogenetic diversity. The positive effects of trait diversity on insect predation were, on the other hand, consistent across woodland pastures and apple orchards. 4) Our results also pinpointed forest cover and resource availability as filters of the different components of avian diversity, suggesting that environmental gradients condition the effects of biodiversity on avian ecological functions. 5) Our findings reveal variable effects of trait diversity on two different avian ecological functions, but consistent effects on the same function across agroecosystems. Consolidating the generalities of trait diversity effects will require further multi-function studies, as well as a unifying framework for animal-driven functions that integrates the causal links between environmental gradients, the different biodiversity components, and ecological functions., MinECo/FEDER, Award: CGL2015-68963-C2-2-R, MinECo/FEDER, Award: BES-2016-078260, Fundación BBVA, Award: 044-2019 ClaveSER, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Annotated genes Aphanius iberus genome as part of "De novo genome hybrid assembly and annotation of the endangered and euryhaline fish Aphanius iberus (Valenciennes, 1846) reveals critical genes on salinity adaptation"

  • López-Solano, Alfonso
  • Doadrio, Ignacio
  • Nester, Tessa Lynn
  • Perea, Silvia
[Description of methods used for collection/generation of data] A hybrid assembly approach was employed, integrating PacBio long-read sequencing with Illumina short-read data, an extensive functional annotation of the genome is provided by using AUGUSTUS with InterProScan and Sma3s., [Methods for processing the data] Software MaSuRCA and HASLR. Also Transdecoder to predict candidate coding regions., The sequencing of non-model species has increased exponentially in recent years, largely due to the advent of novel sequencing technologies. In this study, we construct the reference genome of the Spanish toothcarp (Aphanius iberus (Valenciennes, 1846)), a renowned freshwater fish species. A hybrid assembly approach was employed, integrating PacBio long-read sequencing with Illumina short-read data. In addition to the assembly, an extensive functional annotation of the genome is provided by using AUGUSTUS, and two different approaches (InterProScan and Sma3s). The integration of genomic data with predicted genes presents future research opportunities across multiple disciplines, such us physiology, reproduction, disease, and opens up new avenues for future studies in comparative genomic studies., PID2019-103936GB-C22, Project Aphanius., Annotation_Aphanius_iberus.xlxs, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Summaries_of_meteorological_observations_from_the_Spanish_Meteorological_Service, v.2.0.0. [Dataset], Resúmenes de las observaciones meteorológicas del Servicio Meteorológico Nacional (1915-1950): precipitación máxima y precipitación acumulada a nivel mensual y temperaturas diarias máximas y mínimas medias y absolutas mensuales

  • González Hidalgo, José Carlos
  • Peña-Angulo, Dhais
  • Beguería, Santiago
  • Trullenque Blanco, Víctor
[ES] "Summaries_of_meteorological_observations_from_the_Spanish_Meteorological_Service, v.2.0.0. [Dataset]" se compone de los datos de precipitación (total mensual y maximo diario mensual) y temperatura (media mensual de las maximas diarias, media mensual de las minimas diarias, maximo diario mensual, minimo diario mensual) de los Libros Resúmenes Anuales editados por los sucesivos Servicios Meteorológicos de España en el periodo 1915-1950. No se ha aplicado ningún procedimiento de tratamiento a los datos, son datos brutos lo más exactos posible procedentes de los Anuarios. El procedimiento de cotejo entre las observaciones de los Anuarios (LRAs) y las de la Base Nacional de Datos del Clima (BNDC) consistió en determinar, para cada estación que aparece en los LRAs, la estación a la que corresponde en la BNDC. No se trata de una tarea sencilla, ya que el nombre de un mismo observatorio en los LRAs puede aparecer de forma diferente en años sucesivos, mientras que, por otra parte, la fiabilidad de las coordenadas es escasa. En consecuencia, el cotejo en su primera fase se convirtió en una combinación de identificación de nombres de observatorio similares entre ambas fuentes junto con la búsqueda de cadenas de registros idénticas en la secuencia mensual de cada año. En las series anuales así identificadas como idénticas (o muy similares), se comprobó que tenían la misma localización provincial y que el nombre del observatorio era similar en ambas fuentes, teniendo en cuenta que su nombre puede aparecer de forma diferente a lo largo de los años. En una segunda fase, la información no emparejada por el proceso anterior se trató individualmente para cada caso (registro anual), buscando similitud de nombre y provincia si ampliaba series ya emparejadas, o si podía considerarse una nueva serie no incluida en la BNDC, en cuyo caso se estimaron sus coordenadas con precisión de 1 minuto de latitud y longitud. [EN] "Summaries_of_meteorological_observations_from_the_Spanish_Meteorological_Service, v.2.0.0. [Dataset]" is composed of precipitation (monthly total and monthly daily maximum) and temperature (monthly mean daily maximum, monthly mean daily minimum, monthly daily maximum, monthly daily minimum) data from the Annual Summary Books published by the successive Spanish Meteorological Services in the period 1915-1950. No processing procedure has been applied to the data, they are raw data as accurate as possible from the Annual Books (ABs). The matching procedure between the observations of the ABs and those of the National Climate Database (NCDB) consisted in determining, for each station appearing in the ABs, the station to which it corresponds in the NCDB. This is not a simple task, since the name of the same observatory in the ABs may appear differently in successive years, while, on the other hand, the reliability of the coordinates is poor. Consequently, the matching in its first phase became a combination of identification of similar observatory names between both sources together with the search for identical record strings in the monthly sequence of each year. In the annual series thus identified as identical (or very similar), it was found that they had the same provincial location and that the observatory name was similar in both sources, taking into account that its name may appear differently over the years. In a second phase, the information not matched by the previous process was treated individually for each case (annual record), looking for similarity of name and province if it extended series already matched, or if it could be considered a new series not included in the NCBD, in which case its coordinates were estimated with 1-minute precision of latitude and longitude., [ES] El conjunto de datos "Summaries_of_meteorological_observations_from_the_Spanish_Meteorological_Service" es el resultado de un proceso de digitalización de los datos publicados en los Resúmenes de las Observaciones Meteorológicas -realizados a nivel anual- y editados por el Servicios Meteorológico Español, periodo 1915-1950. Concretamente, la información digitalizada es la precipitación mensual y la precipitación máxima diaria mensual junto a la media mensual de las temperaturas máximas diarias, la media mensual de las temperaturas mínimas diarias y el valor máximo y el valor mínimo diario de temperatura a nivel mensual. Estos datos, combinados con los incluidos en el BNDC, han sido empleados para el desarrollo de las mallas de alta resolución denominadas MOPREDAS y MOTEDAS_1916-2015 y subsiguientes versiones, [EN] The data set "Summaries_of_meteorological_observations_from_the_Spanish_Meteorological_Service" is the result of a digitization process of the data published in the Summaries of Meteorological Observations -made at annual level- and edited by the Spanish Meteorological Service, period 1915-1950. Specifically, the digitized information is the monthly precipitation and the maximum daily monthly precipitation together with the monthly mean of the maximum daily temperatures, the monthly mean of the minimum daily temperatures and the maximum and minimum daily values of temperature at monthly level. These data, combined with those included in the BNDC, have been used for the development of the high-resolution grids called MOPREDAS and MOTEDAS_1916-2015 and subsequent versions., Project PID2020-116860RB-C22: Extremos térmicos y pluviométricos en la España peninsular 1916-2020), funded by the Spanish Ministry of Science., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Extraordinary_Daily_Precipitation_Catalogue_of_Spain_1916-2022, v.1.0.0. [Dataset], Catálogo de los eventos extraordinarios de precipitación diaria en España (periodo 1916-2022)

  • González Hidalgo, José Carlos
  • Beguería, Santiago
  • PeñaAngulo, Dhais
  • Trullenque Blanco, Víctor
[ES] El catálogo incluye tantos las fechas de los eventos como las del día previo y posterior en un listado junto al mapeado de cada uno de ellos en cartografías individuales (3 por cada evento) donde se incluyen todos los observatorios en la misma fecha que registraron el máximo mensual de precipitación, fuese cual fuese su magnitud. [ES] The catalogue includes the dates of the events as well as those of the previous and following day in a list together with the mapping of each of them in individual cartographies (3 for each event) where all the observatories on the same date that recorded the maximum monthly precipitation, whatever its magnitude, are included., [ES] "Extraordnary_Daily_Precipitation_Catalogue_of_Spain_1916-2022, v.1.0.0. [Dataset]" es un catálogo de eventos de lluvia extraordinaria sucedidos a escala diaria superiores a 100 mm y 200 mm obtenido a partir de los Libros Resúmenes Anuales, editados por los sucesivos Servicios Meteorológicos de España en el periodo 1916-1950 y los fondos documetales del Banco Nacional de Datos Climáticos de AEMET., [EN] “Extraordinary_Daily_Precipitation_Catalogue_of_Spain_1916-2022, v.1.0.0. [Dataset]” is a catalog of daily extraordinary rainfall events greater than 100 mm and 200 mm obtained from the Annual Summary Books, edited by the successive Meteorological Services of Spain in the period 1916-1950 and the documentary collections of the National Climatic Data Bank of AEMET., Project PID2020-116860RB-C22: Extremos térmicos y pluviométricos en la España peninsular 1916-2020), funded by the Spanish Ministry of Science, No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

DATA from research paper "Hyperbolic Bloch points in ferrimagnetic exchange spring"

  • Hermosa, Javier
  • Hierro-Rodríguez, Aurelio
  • Sorrentino, Andrea
  • Martín, José Ignacio
  • Álvarez-Prado, L. M.
  • Pereiro, Eva
  • Quirós, Carlos
  • Vélez, María
  • Ferrer, Salvador
The ALBA Synchrotron is funded by the Ministry of Research and Innovation of Spain, by the Generalitat de Catalunya and by European FEDER funds. This work has been supported by Spanish MCIN/AEI/10.13039/501100011033/FEDER,UE under grants PID2019-104604RB and PID2022-136784NB and by Asturias FICYT under grant AYUD/2021/51185 with the support of FEDER funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Interaction networks plants-arbuscular mycorrhizal fungi in Mediterranean ecosystems [Dataset]

  • Garrido Sánchez, José Luis
  • Alcántara, Julio M.
  • López García, Álvaro
  • Ozuna, Carmen
  • Perea, A.
  • Prieto-Rubio, Jorge
  • Rincón, Ana
  • Azcón González de Aguilar, Concepción
Arbuscular mycorrhizas (AM) are one of the most frequent mutualisms in terrestrial ecosystems where fungi colonized plant roots. This dataset comprises information on the presence and abundance of different AM fungal taxa, in the form of virtual taxa, in woody plant species of two Mediterranean natural areas of South Spain. The data was generated by meta-barcoding the 18S rDNA of AM fungi in plant roots via MiSeq sequencing. This dataset contains more information regarding sampling source regarding the previous version stored in Dryad repository, Ministerio de Ciencia e Innovación: CGL2015-69118-C2-2-P Ministerio de Ciencia e Innovación: PGC2018-100966-B-I00 European Commission, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

LC-MS dataset for the paper “Gesteiro, N.; Cao, A.; Santiago, R.; Lobagueira, P.; González-Prieto, S.J.; Malvar, R. A.; Butrón, A. Effects of seed infection by Fusarium verticillioides on maize performance against Sesamia nonagrioides attack. Physiologia Plantarum

  • Gesteiro Portas, Noemí
  • Cao Caamaño, Ana
  • Santiago Carabelos, Rogelio
  • Lobagueira, Paula
  • González Prieto, Serafín Jesús
  • Malvar Pintos, Rosa Ana
  • Butrón Gómez, Ana María
[Description of methods used for collection/generation of data] Stem pith tissue samples were extracted with 80% methanol and filtered through a 0.22 µm PTFE membrane to an Eppendorf tube. An aliquot was transferred to a HPLC certified vial. Balanced pools of the total sample extracts were prepared as quality control (QC). Blank extractions were used. All samples were evaporated to dryness, stored at 4° C until analysis, and then dissolved in 80% methanol. Metabolomics profiles were acquired using an ultra‐high‐performance liquid chromatography (UHPLC) system (Thermo Dionex Ultimate 3000 LC) coupled to a quadrupole-time-of-flight mass spectrometer (QTOF-MS) equipped with an electrospray ionization source (ESI) (Bruker Compact; Bruker Daltonics). We measured the analytical samples using three analytical batches, each one con-taining 6 blocks of 10 analytical samples. The analytical samples were randomly assigned to batches and blocks within batches. Blanks were placed at the initial and final positions of each batch and QC samples were evenly distributed bordering the blocks. UHPLC separation was performed with a Inten-sity Solo 2 C18 column (1.7 µm, 2.1× 100 mm; Bruker Daltonics) in gradient elution consisted of 0.1% of formic acid on water (solvent A) and acetonitrile (solvent B) as mobile phase in a 0.4 ml/min flow rate. The elution conditions were: 0 min, 3 % B; 4 min, 3 % B; 16 min, 25 % B; 25min, 80% B; 30 min, 100% B; 32 min, 100% B; and return to initial conditions at 33 min (3% B) for 3 min. Full scan MS data were acquired in both positive and negative ionization modes over the mass range of 100–1200 m/z, and under the following specific conditions: gas flow 9 L min−1; nebuliser pressure 2.6 bar; dry gas 9 L min−1; dry temperature 220 °C. Auto MS/MS fragmentation was performed in pooled samples to facilitate compound identification. After each batch, the MS ion source was cleaned, and the MS was recalibrated. [Methods for processing the data:] We pre-processed the raw MS spectra using the algorithm T-Rex 3D in MetaboScape 4.0 software (Bruker Daltoniks, Germany). Parameters were set to separate measured peaks from background noise and features were grouped across samples and corrected for retention time shifts. After this pre-processing, data were prepared for statistical analysis using Metaboanalyst (Chong et al. 2019). Fea-tures with > 75 % missing data were eliminated and missing data imputation was performed using the KNN (feature-wise) method. Afterwards ANCOVA method was used for batch correction and contam-inants present in blanks were removed. Features with percent relative standard deviation (RSD = SD/mean) > 25 % across QCs samples were removed, as well as uninformative features that presented near-constant values detected by the interquartile range filter (IQR). Then, Pareto scaling was applied to adjust for the disparities in fold differences between the analytes., This dataset belongs to an untargeted metabolomic study to investigate i) the responses in maize pith to the attack of the insect Sesamia nonagrioides under plant colonization by the fungus Fusarium verticillioides; ii) if the response differences could depend on genotype resistance to Fusarium; and iii) to determine metabolites associated to beneficial/detrimental changes of on maize performance. The dataset are LC-MS experimental data for untargeted metabolomics of pith tissues extracts from 8 maize inbred lines genetically diverse with different level of resistance to F. verticillioides infection. Inbred lines were PB130, EP77, A509, EP125, EP42, A637, A630, A239. Experimental treatments were four and labeled as: - Control-Control (CC): no seed inoculation with F. verticillioides and no infestation with S. nonagrioides; - Fusarium-Control (FC): seed inoculation with F. verticillioides and no infestation with S. nonagrioides; - Fusarium-Sesamia (FS): seed inoculation with F. verticillioides and plant infestation with S. nonagrioides; - Control-Sesamia (CS): no seed inoculation with F. verticillioides and plant infestation with S. nonagrioides. Up to six plant per genotype-treatment combination were used as biological replicates. Because of the large number of analytical samples were grouped in 3 analytical batches for LC-MS analyses. Each batch contains 6 blocks of 10 analytical samples. The analytical samples were randomly assigned to batches and blocks within batches. Blanks were placed at the initial and final positions of each batch and QC samples were evenly distributed bordering blocks. QCs were balanced pools of the total sample extracts. Spectral data were acquired in a LC-ESI-QTOF mass spectrometer (Bruker Daltonics). MS acquisition was performed in both negative and positive ionization modes for full scan in a mass scan range of m/z 100-1200 with Bruker OTOF Control and DataAnalisys software (Bruker Daltonics).The dataset raw data were converted to mzML format with ProteoWizard MSConvert tool (Version: 3.0.24261). Biosynthesis of unsaturated fatty acids and linolenic acid metabolism were downregulated in susceptible inbreds under the FS treatment compared to CS treatment, and glutathione metabolism and aminoacyl-tRNA biosynthesis upregulated. Phenylalanine, tyrosine and tryptophan biosynthesis (PTTB) pathway was enriched in the comparison FS versus CS in resistant inbreds, as well as other pathways highly related with PTTB pathway such as isoquinoline alkaloid biosynthesis and ubiquinone and other-terpenoid-quinone biosynthesis pathways., This research was funded by subsequent coordinated projects financed by MCIU/AEI/FEDER, UE (RTI2018-096776-B-C21, RTI2018-096776-B-C22, PID2021-122196OB-C21 and PID2021-122196OB-C22)., File List: MS NEG Batch 1.zip MS NEG Batch 2.zip MS NEG Batch 3.zip MS POS Batch 1.zip.001 MS POS Batch 1.zip.002 MS POS Batch 1.zip.003 MS POS Batch 2.zip.001 MS POS Batch 2.zip.002 MS POS Batch 3.zip.001 MS POS Batch 3.zip.002, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary data for Building robust copper nanostructures via carbon coating derived from polydopamine for oxygen reduction reaction [Dataset]

  • Cebollada Borao, Jesús
  • Sebastián del Río, David
  • Yamasaki, Jun
  • Agúndez Rodríguez, Javier
  • Lázaro Elorri, María Jesús
  • Martínez Huerta, M. Victoria
6 figures, 2 tables.-- Under a Creative Commons license CC BY 4.0, https://creativecommons.org/licenses/by/4.0/, Figure S1. TEM images and diffraction patterns of copper, cuprite and graphite for Cu-150-NC. Figure S2. Raman Spectrum of Cu-X-NC (X= 0, 120, 150, 180). Figure S3. High resolution N1s spectra of Cu-X-NC (X= 0, 120, 150, 180). Figure S4. Nyquist plot from EIS experiments at 0.78 V vs RHE for the catalysts Cu-X-NC (X = 0, 120, 150 and 180). Figure S5. ORR polarization curves before and after accelerated stability test of catalysts Cu-0-NC, Cu-120-NC and Cu 180-NC. Figure S6. SEM images of Cu-150-NC (A) before and (B) after acceleration stability test. Table S1. Surface chemical composition (wt%) of the catalysts obtained by XPS. Table S2 Double Layer capacitance, Electrochemical Surface Area, Mass Activity and Specific Activity of the catalyst Cu-X-NC (X= 0, 120, 150 and 180) and after Accelerated stability test Cu-X-NC 10000 (X=0, 120, 150 and 180)., The authors wish to acknowledge the grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033. J. Cebollada also thanks the grant PRE2018-084842 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Controls of focused fluid release in subduction zones: insights from experimental dehydration of brucite vein networks in serpentinite [Dataset 1: Electron microscopy]

  • Menzel, Manuel D.
  • Eberhard, Lisa
  • Arias, Austin
  • Padrón-Navarta, José Alberto
  • Plümper, Oliver
This data repository contains the full-resolution scanning electron microscopy (SEM-EDX, SEM-BSE and SEM-EBSD) data of (A) the starting material and (B) the post-experiment analysis, of the article: Menzel, Manuel D.; Eberhard, Lisa; Arias, Austin; Padrón-Navarta, José Alberto; Plümper, Oliver; 2025. Controls of focused fluid release in subduction zones: insights from experimental dehydration of brucite vein networks in serpentinite (in review in Contributions to Mineralogy and Petrology)., The collection of data included in this repository was funded by RUSTED projects PID2022-136471NB-C21 & PID2022-136471NB-C22 funded by the Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033), Spain, co-financed by the European Union ERDF – a way of making Europe. The authors further acknowledge: EXCITE Network Transnational Access TNA-C3-2023-13 under European Union’s Horizon 2020 grant agreement No 101005611 & Horizon Europe grant agreement No 101131765 (L.E.; M.D.M). M.D.M acknowledges a postdoctoral fellowship (Postdoc_21_00791) funded by the Junta de Andalucía (Consejeria de Conocimiento y Universidades) and cofunded by ERDF. J.A.P-N. acknowledges additional support from the Junta de Andalucía through the ProyExcel 00757 research project. L.E., A.A. and O.P. acknowledge funding by the Nederlandse Organisatie voor Wetenschappelijk Onderzoek (NWO), grant VI.Vidi.193.030, the Netherlands., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting information for Present-day shortening accommodated by folding, thrusting and strike-slip faulting in the Enriquillo basin of southern central Hispaniola: implications for the regional seismic hazard [Dataset]

  • Escuder Viruete, Javier
  • Fernández Rodríguez, Francisco José
  • Pérez Valera, Fernando
  • Medialdea, Alicia
  • Castillo-Carrión, Mercedes
Methods are described in the publication: Escuder‐Viruete, J., Fernández, F. J., Valera, F. P., Medialdea, A., & Castillo‐Carrión, M. (2025). Present‐day shortening accommodated by folding, thrusting and strike‐slip faulting in the Enriquillo basin of southern central Hispaniola: Implications for the regional seismic hazard. Tectonics, 44, e2024TC008376. https://doi.org/10.1029/2024TC008376, Methods for procesing the data are described in the publication: Escuder‐Viruete, J., Fernández, F. J., Valera, F. P., Medialdea, A., & Castillo‐Carrión, M. (2025). Present‐day shortening accommodated by folding, thrusting and strike‐slip faulting in the Enriquillo basin of southern central Hispaniola: Implications for the regional seismic hazard. Tectonics, 44, e2024TC008376. https://doi.org/10.1029/2024TC008376, Instrument- or software-specific information needed to interpret/reproduce the data is described in the Supporting Information 4. Methodology of dynamic fault-slip analysis., Estructura: Data Set_digital.csic.docx Supporting Information 1. GPS site velocities relative to Caribbean plate fixed frame. Supporting Information 2. Results of optically stimulated luminescence dating. Supporting Information 3. Results of radiocarbon dating. Supporting Information 4. Methodology of dynamic fault-slip analysis. Supporting Information 5. Earthquake focal mechanisms for southern central Hispaniola. Supporting Information 6. Geological characteristics of sites used to obtain stress tensors from fault and fracture data. Supporting Information 7. Stress tensors obtained by methods of inversion of fault-slip data. Supporting Information 8. Stress tensors obtained from mixed Bingham distribution of fault and fracture planes. Supporting Information 9. Maximum horizontal stresses and tectonic regimes obtained by inversion methods Supporting Information 10. Characteristics of the main seismotectonic structures in the Enriquillo basin and adjacent regions., [EN] This dataset present GPS geodetic, geochronological (optically stimulated luminescence and radiocarbon) methodological, seismic, structural and seismotectonic data collected in southern central Hispaniola Island in the Dominican Republic. These data collectively allow us to better understand how Hispaniola accommodates a significant portion of the present-day convergence between Caribbean and North American plates. In particular, the role played by the of active individual faults and fault systems in the Neogene Enriquillo basin and adjacent Neiba and Bahoruco mountain ranges. This information is important to characterize the active deformation pattern in southern Hispaniola, but it is also crucial to quantitatively estimate the regional seismic hazard., The research was funded through DR-T 1190 project of the Banco Interamericano de Desarrollo (World Bank), 2015-1b3-118 FONDOCYT project of the Dominican Republic Government and PID2019-105625RB-C22 MCIN/AEI/10.13039/501100011033 project of the Spanish Government., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Data for in situ modification of the magnetocrystalline anisotropy in cobalt-ferrite microcrystals

  • Mandziak, Anna
  • Prieto, J. E.
  • Dávalos, J.Z.
  • Prieto, Pilar
  • Foerster, Michael
  • Aballe, Lucía
  • de la Figuera, Juan
[Description of methods used for collection/generation of data: ] X-ray absorption spectroscopy and X-ray magnetic circular dichroism in photoemission electron microscopy., [Methods for processing the data] Intensity extracted from sequence of images at different photon energies, after manual drift correction. Vector magnetization extracted using the protocol described in https://surfmoss.iqf.csic.es/en/2013-04-02-10-34-02/manuals-howtos/90-vector-xcmd-peem-spleem, We present the in situ modification of the magnetocrystalline anisotropy of iron-rich cobalt-ferrite epitaxial islands by changing their composition. Crystalline cobalt-ferrite spinel islands have been grown by oxygen-assisted molecular beam epitaxy on a Ru(0001) single crystal. The micro-crystals are several micrometers wide with heights of tens of nanometers. Their spatially-resolved vector magnetization is mapped by x-ray magnetic circular dichroism in photoemission microscopy at the L3 absorption edges of Co and Fe. Thick islands present a closure-like magnetic domain structure with the magnetization directions predominantly aligned along the projections of the easy magnetic axes onto the (111) surface plane. Thinner islands are more affected by growth defects and present a more complex domain structure. Upon deposition of additional Fe in an oxygen background pressure, Co is found to segregate out of the spinel islands, while their Fe content increases. This produces a reduction in the magnetocrystalline anisotropy, which manifests as a reorientation of the magnetization directions towards the edges of the islands, reflecting an increased contribution of the shape anisotropy, AMADEUS PID2021-124585NB-C31, PID2021-124585NB-C32), Nanobond (TED2021-130196B-C22, TED2021-130957B-C54), PID2020-117024GB-C43, TED2021-130957B-C54., File List: - Characterization of as-grown sample - XAS PEEM Images: Fe, Co, O folders - XAS XMCD Images at 0, 60, and 120 degrees azimuthal rotation: Fe - Growth sequence of LEEM images - Characterization of modified sample - XAS PEEM Images: Fe, Co - XAS XMCD Images at 0, 60, 120 degrees azimuthal rotation: Fe, Co - Micromagnetic simulations - Input files - Auxiliary data - Calibration of counts vs. Channel plates voltage - Logbook of experiments, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

2D MoS2/Cu2O on 3D mesoporous silica as visible-NIR nanophotocatalysts for environmental and biomedical applications

  • Shahnazarova, Gubakhanim
  • Ramírez, Jéssica Casandra
  • Al Hoda Al Bast, Nour
  • Fraxedas, J.
  • Nogués, Carme
  • Nogués, Josep
  • Serrà, Albert
  • Sepúlveda, Borja
  • Esplandiú, María J.
[Description of methods used for collection/generation of data] - Experimental UV-VIS spectroscopy (Figure_3a.opju). Data acquired with a Cary 4000 spectrophotometer without data processing. - Experimental Photoluminescence spectroscopy (Figure_3b.opju): Data acquired with a Horiba T64000 spectrometer without data processing - Experimental Raman spectroscopy (Figure_3c.opju): Data acquired with a Horiba T64000 spectrometer without data processing - Experimental Diffraction spectroscopy (Figure_3d.opju): Data were acquired using a Malvern PANanlytical X´pert Pro MDP, without data processing. - Experimental determination of the band-gap (Figure_S3a.opju and Figure_S3b.opju): Data were acquired using UV-VIS diffuse reflectance spectroscopy (Cary 4000 spectrophotometer) in combination with Kubelka-Munk Analysis. - Experimental XPS data (Figure_4.opju and Figure S2.opju): XPS data: Data acquired with a SPECS PHOIBOS150 hemispherical analyser with a monochromatic X-ray source (1486.6 eV) operated at 300W. The overall experimental resolution, including the contribution from the hemispherical analyser (energy and angle) and the monochromatic X-ray source, is better than 0.6 eV for a pass energy of 20 eV. The reported binding energies have been determined with an error of ±0.1 eV and are referred to the Fermi level of the analyser, which is periodically determined by measuring the photoelectron energies from an atomically clean reference Au(111) sample. No correction to the measured binding energies has been applied to the spectra. - Experimental Data for photodegradation of Tetracycline (Figure_5a.opju, Figure_5b.opju, Figure_5c.opju Figure_5d.opju). The photocatalyst, either MoS2 or MoS2-Cu2O, (4 cm²), was immersed in a solution containing 5 ppm tetracycline (TC) (pH=6 and pH=8). The system was kept in the dark for 30 min to reach adsorption equilibrium. Afterward, the nanoreactors were irradiated with visible light using a warm LED (λ > 420 nm, max. 600 nm, 52 × 10⁻³ W·cm⁻²). The photoreaction progress was monitored via absorbance measurements using a Cary 4000 spectrophotometer and the Lambert-Beer law (supported files: Figure_data_support_photodegradation_TC-MoS₂_Cu₂O_pH6.opju, Figure_data_support_photodegradation_TC-MoS₂_pH8.opju, Figure_data_support_photodegradation_TC-MoS₂_pH6.opju). By observing the decay of TC absorbance over time from its initial value in presence of light, the variation in TC concentration was determined using the Lambert-Beer law, enabling the generation of the plots in Figs. 5a and 5c, as well as part of Fig. 5b. The rate constant of the photodegradation process was obtained by performing a linear fit of the plot Ln(C/C₀) vs. time using the Origin program for data processing. Additionally, the total organic content (TOC) analysis (Figure_5b.opju) was conducted using a TOC-VCSH instrument. - The experimental data corresponding to reactive oxygen species identification and photocatalyst recyclability of MoS2-Cu2O (Figure_6a.opju and Figure_6b.opju), were extracted by observing the changes of TC absorbance over time from its initial value with the spectrophotometer Cary 4000. In the case of Figure_6a, the experiments were performed in presence and in absence of ROS quenchers and in Figure_6b.opju, the same photocatalysts was re-used 10 times and evaluated its performance through the absorbance decay of TC in presence of light. - Experimental Data for photodegradation of Anatoxin (Figure_7a.opju, Figure_7b.opju, Figure_7c.opju). The MoS₂/Cu₂O photocatalyst (4 cm²) was immersed in a solution containing 20 ppm of Anatoxin-A. The system was kept in the dark for 30 min to reach adsorption equilibrium. Afterward, the nanoreactors were irradiated with visible light using a warm LED (λ > 420 nm, max. 600 nm, 52 × 10⁻³ W·cm⁻²). The anatoxin photodegradation was analyzed via high-performance liquid chromatography (HPLC) using a Waters Alliance 2795 instrument equipped with a PDA detector (Waters 2996) and a mass detector (Waters ZQ 2000). The changes of Absorbance of Anatoxin through HPLC measurements were collected in Figure_7a.opju. The degradation and kinetics evaluation was similar to the case of TC. The kinetics of the photodegradation process was obtained by performing a linear fit of the plot Ln(C/C₀) vs. time using the Origin program for data processing. Additionally, the total organic content (TOC) analysis (Figure_7b.opju) was conducted using a TOC-VCSH instrument., [Methods for processing the data] - XPS experimental data: CasaXPS software version 2.3.16 PR 1.6 - Experimental determination of the band-gap: data were processed for extracting the Kubelka-Munk function using Origin program tools. - Experimental Data for photodegradation of Tetracycline: the kinetics of the photodegradation reaction was evaluated by linear fits to the curves Ln(C/C0) vs time, using Origin software tools. - Experimental Data for photodegradation of Anatoxin-A: the HPLC measurements were smoothed with Origin program tools and the kinetics of the photodegradation reaction was evaluated by performing linear fits to the Ln(C/C0) vs time curves, also using Origin software tools., - The Ministerio de Ciencia e Innovación (MICIN). Grants DIN2021-011916, TED2021-129898B-C22, TED 2021-129898B-C21, PID 2020-116844RB-C21, PID2022-138588OB-C31, PID2022-138588OB-C32 and PID 2021-124568NB-I00 funded by NextGenerationEU and MICIU/AEI/10.13039/501100011033. - Departament de Recerca i Universitats, particularly the Departament d'Acció Climàtica, Alimentació i Agenda Rural, as well as the Fons Climàtic de la Generalitat de Catalunya (project 2023 CLIMA 00009 AGAUR) - CERCA program/Generalitat de Catalunya. - Severo Ochoa Centres of Excellence program, Grant CEX2021-001214-S (ICN2) and Maria de Maeztu Centres of Excellence program Grant CEX2023-001397-M (IMB-CNM), both funded by MCIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001397-M)., File List: Figure_3a.opju, Figure_3b.opju, Fig_4_right.opju; Fig_4_right.opju; Fig_4_inset_a_VBM.opju , Fig_4_inset_c_VBM.opju, Figure_5a.opju, Figure_5b.opju; Figure_5c.opju; Figure_5d.opju; Figure_6a.opju, Figure_6b.opju; Figure_7a.opju; Figure_7b.opju; Figure_7c.opju; Figure_S2.opju, Figure_S3a.opju; Figure_S3b.opju, Figure_data_support_photodegradtion_TC-MoS2_Cu2O_pH8.opju, Figure_data_support_photodegradtion_TC-MoS2_Cu2O_pH6.opju, Figure_data_support_photodegradtion_TC-MoS2_pH8.opju, Figure_data_support_photodegradtion_TC-MoS2_pH6.opju., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Monitor de Aridez [Dataset], Monitor de la aridez climática en España

  • Arretxea Iriarte, Manuel
  • Simón Celada, Marta
  • Beguería, Santiago
  • Trullenque Blanco, Víctor
  • Rondón Velasco, María del Mar
  • Latorre Garcés, Borja
  • Vicente Serrano, Sergio M.
[ES] Esta base de datos climática presenta un conjunto de información representado en forma de cuadrícula a escalas mensual, estacional y anual sobre la aridez en España (territorios de la Península Ibérica, islas Baleares e islas Canarias) entre enero de 1961 y la actualidad. El Índice de Aridez es una medida del carácter seco o húmedo del clima de una región, y junto con la temperatura media es uno de los factores climáticos que mejor explican la distribución de los diferentes biomas en el planeta o la potencialidad para el cultivo. Aquí, se ha elaborado una base de datos reticular del Índice de Aridez definido por el Programa de Naciones Unidas para el Medio Ambiente: (IA, mm / mm) como el cociente entre la precipitación (P, mm) y la evapotranspiración potencial (PET, mm): AI = P / PET. En lugar de PET se ha utilizando la ETo (evapotranspiración de referencia), calculada mediante la ecuación Penman-Monteith de la FAO-56, y que ofrece una medida más adecuada de la evaporación potencial. Los datos de P y ETo se han obtenido de la Base de Datos Histórica de la Sequía en España (https://monitordesequia.csic.es/historico), desarrollada a partir de los datos de observación meteorológica del Banco Nacional de Datos Climáticos de AEMET, interpolados espacialmente para cubrir la totalidad del territorio. Se han calculado tanto las series temporales como las climatologías mensuales, estacionales y anuales del Índice de Aridez. Para el cálculo de climatologías (valores medios) se ha considerado el periodo 1961-2020, cubriendo 60 años. Este marco temporal se ha subdivido además en dos periodos iguales de 30 años, conocidos como periodos normales: 1961-1990 y 1991-2020, lo que permite analizar cambios en el valor del Índice de Aridez. Este índice se puede consultar de forma cuantitativa o bien categorizado en clases, siendo esta la forma de visualización por defecto. Junto a la información histórica y la actualizada anualmente, se incluyen las proyecciones futuras de la aridez climática en España (territorios de la Península Ibérica, Baleares y Canarias) para las Trayectorias socioeconómicas compartidas (SSP, por sus siglas en inglés) SSP 126, SSP 245, SSP 370 y SSP 585 y los niveles de calentamiento global (GWL, por sus siglas en inglés) +1,5 ºC, +2 ºC, +3 ºC y +4 °C. Los productos generados incluyen las climatologías (promedios y medianas de los modelos), el grado de acuerdo (considerándolo solamente cuando más 80 % de los modelos presenten el mismo signo de cambio) y los cambios relativos (diferencias entre los periodos de 20 años alrededor de cada GWL y la climatología del periodo de referencia 1986-2014). [EN] This climatic database presents a set of information represented in a grid form at monthly, seasonal and annual scales on aridity in Spain (territories of the Iberian Peninsula, Balearic Islands and Canary Islands) between January 1961 and the present. The Aridity Index is a measure of the dry or humid character of the climate of a region, and together with the average temperature is one of the climatic factors that best explain the distribution of the different biomes on the planet or the potential for cultivation. Here, a grid database of the Aridity Index defined by the United Nations Environment Program (AI, mm / mm) has been elaborated as the quotient between precipitation (P, mm) and potential evapotranspiration (PET, mm): AI = P / PET. Instead of PET, ETo (reference evapotranspiration), calculated using the Penman-Monteith equation of FAO-56, has been used, which provides a more adequate measure of potential evaporation. The P and ETo data were obtained from the Historical Database of Drought in Spain (https://monitordesequia.csic.es/historico), developed from the meteorological observation data of the National Climatic Data Bank of AEMET, spatially interpolated to cover the entire territory. Both the time series and the monthly, seasonal and annual climatologies of the Aridity Index have been calculated. For the calculation of climatologies (average values), the period 1961-2020 has been considered, covering 60 years. This time frame has been further subdivided into two equal periods of 30 years, known as normal periods: 1961-1990 and 1991-2020, which allows us to analyze changes in the value of the Aridity Index. This index can be consulted quantitatively or categorized into classes, this being the default display. Along with the historical and annually updated information, future projections of climate aridity in Spain (territories of the Iberian Peninsula, Balearic Islands and Canary Islands) are included for the Shared Socioeconomic Pathways (SSP) SSP 126, SSP 245, SSP 370 and SSP 585, and the Global Warming Levels (GWL) +1.5 ºC, +2 ºC, +3 ºC and +4 °C. The products generated include the climatologies (averages and medians of the models), the degree of consensus (only considering it when at least 80% of the models show the same sign of change) and the relative changes (differences between the periods of 20 years around each GWL and the climatology of the reference period 1986-2014)., [ES] Este conjunto de datos proporciona información en tiempo cuasi real (actualización anual) de las condiciones de aridez climática en España a resolución espacial de 1.1 km. Proporciona los valores del Índice de Aridez de la FAO a diferentes escalas temporales (resolución temporal mensual, estacional y anual) desde el año 1961 hasta la actualidad junto a las proyecciones futuras de este índice asociadas a distintos niveles de calentamiento global (GWLs) y escenarios de emisión (SSPs)., [EN] This dataset provides near real-time information (annual update) of climatic aridity conditions in Spain at a spatial resolution of 1.1 km. It provides the FAO Aridity Index values at different time scales (monthly, seasonal and annual temporal resolution) from 1961 to the present, along with future projections of this index associated with various Global Warming Levels (GWLs) and Shared Socieconomic Pathways (SSPs)., This work has been supported by the Biodiversity Foundation of the Ministry for the Ecological Transition and the Demographic Challenge (MITECO) of the Government of Spain, within the framework of the Recovery, Transformation and Resilience Plan (PRTR), funded by the European Union - NextGenerationEU: Project I023, Analysis and monitoring of climatic aridity in Spain (ARIDESP). We also acknowledge financial support from the Ministry of Science, Innovation and Universities of the Government of Spain through research project PID2020-116860RB-C22, and from the Government of Aragón through grant E02-17R., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Scattering amplitude matrix co-polar components for GNSS Polarimetric Radio Occultations observation geometry [Dataset]

  • Padullés, Ramon
  • Cardellach, Estel
  • Paz, Antía
  • Turk, F. Joseph
The data has been generated using the Discrete Dipole Approximation (DDA) implementation by Yurkin & Hoekstra, 2011, using the habit shape files provided in the ARTS database (Ekelund, et al. 2020, Eriksson, et al. 2018). The frequency is set to 1.57542 GHz, the habits are forced to be fully horizontally oriented to begin with, and the incidence is kept fixed at tangential-to-surface, maximizing the difference between the co-polar components of the scattering amplitude matrix., The dataset includes two different types of files: $habit_Id#.txt : Contain the results of the difference between the real part of the co-polar component of the scattering amplitude matrix by the habit indicated in the name. The full habit population is described using particle shapes with different mass and sizes. The results are computed for different tilt angles ranging from 0º to 180º, e.g. "fhv_$tiltangle". It also contains the result of averaging the values for a gaussian distribution of canting angles centered at 0º with a standard deviation of 10, 20, and 40º, e.g. fhv^$std. Note that when the standard deviation is 0 the result is the same as in "fhv_0", so it is not repeated. See results in Figure 1 in [4]. The units for the fhv are consistent with: Kdp = \int{ fhv N(D) dD } in mm/km, where N(D) units are in m^-4 and D in m. The columns in the files are: Id | mass (kg) | eff_rad (m) | max_diam (m) | size_param | fhv_## | fhv^## summaryWCKDP.txt : this file contains the relationship between water content (g/m^3) and Kdp (mm/km) for the different habits, for the cases with a distribution of canting angles described above. See table 1 in [4]. The columns in the files are: habit | $K_{dp}$/WC | $K_{dp}^{10}$/WC | $K_{dp}^{20}$/WC | $K_{dp}^{40}$/WC, This dataset contains the results for the difference of the co-polar components of the scattering amplitude matrix (f_hv) resulting from the interaction of propagating L-band electromagnetic waves with the icy habits contained in the Atmospheric Radiative Transfer Simulation (ARTS) database. The results are generated using ADDA, accounting for full horizontal orientation of the habits and with the focus on the simulation of the Polarimetric Radio Occultation observables. For this, the necessary magnitude is the specific differential phase shift (Kdp), that can be derived form the f_hv through the particle size distribution. The data provided here can be used as input for a PRO forward operator that accounts for realistic ice particle shapes and it is consistent with the extinction and scattering parameters used to perform microwave radiative transfer simulations at common radiometer channels., Funding: MCIN/AEI (10.13039/501100011033): RYC2021-033309-I, PID2021-1264436OB-C22, CEX2020-001058-M; EUMETSAT ROM SAF CDOP4, With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2020-001058-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting information for In situ growth of nickel phosphide on carbon felt as a promising electrocatalyst for the alkaline hydrogen evolution reaction [Dataset]

  • Gebreslase, Gebrehiwet Abrham
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
Under a Creative Commons BY 4.0 license: https://creativecommons.org/licenses/by/4.0/, 1. Physicochemical characterization; Figure S1. (a)TEM image of NiP@CF, and (b,c)HAADF-EDX of NiP@CF; Figure S2. XPS survey spectra of the various samples; Figure S3. HER polarization curves comparison of NiP@CF sample at different thermal treatments; Figure S4. Cyclic voltammograms at different scan rates: (a) CF, (b) P@CF, (c)NiO@CF, (d)NiO@CF-T, and (e)NiP@CF; Figure S5. (a) SEM and (b )EDX of NiP@CF after stability measurements, Scanning electron microscopy (SEM-EDX) was conducted using an SEM Hitachi 3400N and an EDX Röntec XFlash of Si (Li). For detailed morphology observation, a high-resolution transmission electron microscope (TEM) (Tecnai F30) was utilized, operating at an accelerating voltage of 200 kV. X-ray diffraction (XRD) analyses were performed using a Bruker D8 Advance diffractometer with Cu Kα as the X-ray source, generating 1600 W. X-ray photoelectron spectra (XPS) were acquired using a VG Escalab 200R spectrometer equipped with a hemispherical electron analyzer. The XPS measurements employed Mg Kα (1253.6 eV) at 100 W with passing energy of 50 eV for the survey analysis and 20 eV for the high-resolution regions. The C 1s line at 284.6 eV was used for charge correction in all XPS spectra. Peak fitting and quantification were performed using CasaXPS software, and a Shirley-type background was applied to all peaks. A 70%/30% Gaussian/Lorentzian line shape was employed to deconvolute the high-resolution data for each component., The authors acknowledge the Grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Lifetime fecundity and size in the Mediterranean shrub Lavandula latifolia (Lamiaceae)

  • Herrera, Carlos M.
A study was undertaken between 1986-2023 were plant size and inflorescence production were monitored for the whole reproductive lifespans of N = 128 individuals of the Mediterranean woody shrub Lavandula latifolia (Lamiaceae) to address the following questions: Did individuals vary in lifetime trajectories of size and fecundity?, and Were parameters describing individual trajectories significant predictors of cumulative lifetime reproduction? The study site was in a mixed woodland of Pinus nigra and Quercus rotundifolia in the Sierra de Cazorla, Jaén province, southeastern Spain (site coordinates 37.9612ºN, 2.8847ºW). All plants were checked every summer (August-September) between 1987-2023. On each occasion, individuals found dead were digged up, collected, and their age at the time of death determined by ring counting. For each individual that remained alive, the number of inflorescences produced in the current year was counted and, on the even years, their size was assessed by measuring the two major axes of the canopy and then computing the area of the horizontal projection by assimilating the shape to an ellipse. The birth year of every monitored individual was determined by substracting the age at death from the year of death, and this information was then used to retrospectively compute the age of every plant in each study year. These data were then merged with those on yearly plant fecundity (number of inflorescences) and plant size measurements (estimated canopy area) to obtain individual lifetime profiles of size and fecundity in relation to current age., PID2022-141530NB-C22, DISTEPIC; PROMETEO-2021/040, FocScales, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary information for Graphene-nanofiber hybrid carbon composites as support boosting tantalum oxides activity of bifunctional oxygen reduction/evolution catalysts [Dataset]

  • Sebastián del Río, David
  • Ruiz Cornejo, Juan Carlos
  • Martínez Huerta, M. Victoria
  • Lázaro Elorri, María Jesús
Under a Creative Commons BY 4.0 license., Figure S1. Particle size distribution of Ni-based particles (from CNF growth catalyst) in the rGO-CNF1.0 nanocomposite; Figure S2. Pore size distribution curves obtained by applying BJH method to the desorption branches; Figure S3. XPS signals for Ta 4f for the different TaOx-based catalysts; Figure S4. XRD patterns for the TaOx catalysts supported on rGO-CNF composites as well as rGO and CNF (* line with multiple indexes). The dotted lines (shown only those at Bragg angles above 35º 2theta for the sake of clarity) indicate the position of different reflections and Miller indexes according to ICDD reference patterns (Na2Ta8O21 PDF#28-1137, Ta2O5 PDF#89-2843, TaO PDF#89-4772, Ni PDF#87-0712); Table S1. Lattice parameters from XRD patterns for the tantalum-related phases. The values written in bold correspond to the main component of the tantalum-based formulation., The authors acknowledge Grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MICIU/AEI/10.13039/501100011033, and to the Gobierno de Aragón (DGA) for the funding to Grupo de Investigación Conversión de Combustibles (T06_23R). J.C. Ruiz-Cornejo acknowledges also DGA for his PhD grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

ECESIS. TAREA 4.2_Biological sampling from comercial catch

  • Guijarro-García, Elena
  • Barcala-Bellod, Elena
  • Gil, Emma
  • Escudero-Lozano, Pedro
  • Falco, Silvia
  • Rodilla, Miguel
  • Gil, Alberto
  • Barberá, Carmen
  • Esteso, Isabel
  • Fernández-Tejedor, Margarita
  • Gairín, Joan Ignasi
  • López, Verónica
  • Prado, Patricia
  • Ramos-Esplá, A.A.
[Description of methods used for collection/generation of data] Atlantic blue crab (Callinectes sapidus) sampling was carried out quarterly during 2022 and 2023 to collect fishery-dependent data that would allow us to investigate the presence and distribution of Atlantic blue crab in the Mar menor lagoon. The crabs were caught in diverse artesanal fishing gears used in the lagoon, all of them being set gears. Several data were collected from each individual., Results of seasonal trap sampling of Callinectes sapidus during two years in four Mediterranean localities: Ebro Delta, Albufera, coastal ecosystems in Alicante and Mar Menor lagoon. The data set includes coordinates of the sampled sites, sampling dates, salinity and temperature data registered during sampling events, biometric data from the captured crabs and information on granulometry and organic matter content from the sampling sites., Agencia Estatal de Investigación, PID2020-118476RR-C22., ECESIS_Task_4_2_seasonal_commercial_catch_sampling_CRB, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

ECESIS. TAREA 4.3_Biological sampling from comercial catch

  • Guijarro-García, Elena
  • Barcala-Bellod, Elena
  • Gil, Emma
  • Escudero-Lozano, Pedro
  • Falco, Silvia
  • Rodilla, Miguel
  • Gil, Alberto
  • Barberá, Carmen
  • Esteso, Isabel
  • Fernández-Tejedor, Margarita
  • Gairín, Joan Ignasi
  • López, Verónica
  • Prado, Patricia
  • Ramos-Esplá, A.A.
[Description of methods used for collection/generation of data] Atlantic blue crab (Callinectes sapidus) sampling was carried out quarterly during 2022 and 2023 to collect fishery-dependent data that would allow us to investigate the presence and distribution of Atlantic blue crab in the Mar menor lagoon. The crabs were caught in diverse artesanal fishing gears used in the lagoon, all of them being set gears. Several data were collected from each individual., Biometric individual data from Atlantic blue crab caught in artisanal fishing gear in the Mar Menor lagoon between March 2022 and January 2024., Agencia Estatal de Investigación, PID2020-118476RR-C22., File List: ECESIS_Task_4_3_seasonal_commercial_catch_sampling_CRB, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

High-pressure carbon sequestration in hot subduction zones during deserpentinization driven by CO2-CH4 fluid infiltration

  • Bukała, Michał
  • Padrón-Navarta, José Alberto
  • Menzel, Manuel D.
  • López Sánchez-Vizcaíno, Vicente
  • Garrido, Carlos J.
This dataset is used in an original research article submitted to Journal of Petrology: Michał Bukała, José Alberto Padrón-Navarta, Manuel D. Menzel, Vicente López Sánchez-Vizcaíno , Carlos J. Garrido; 2025. High-pressure carbon sequestration in hot subduction zones during deserpentinization driven by CO2-CH4 fluid infiltration (in review). Link to be added once available., The collection of data included in this repository was funded by RUSTED projects PID2022-136471NB-C21 & PID2022-136471NB-C22 funded by the Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033), Spain, co-financed by the European Union ERDF – a way of making Europe. M.B acknowledges "Juan de la Cierva" Fellowship (JFJC2021-047505-I) awarded by MCIN/AEI/10.13039/501100011033 and CSIC. M.D.M acknowledges a postdoctoral fellowship (Postdoc_21_00791) funded by the Junta de Andalucía (Consejeria de Conocimiento y Universidades) and cofunded by ERDF., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

ECESIS.TAREA 5.4. Reproductive phenology and adult migration

  • Barcala-Bellod, Elena
  • Guijarro-García, Elena
  • Escudero-Lozano, Pedro
  • FIkret, Öndes
  • Gil, Emma
  • Falco, Silvia
  • Barberá, Carmen
  • Esteso, Isabel
  • Fernández-Tejedor, Margarita
  • Prado, Patricia
  • Ramos-Esplá, A.A.
[Description of methods used for collection/generation of data] Atlantic blue crab (Callinectes sapidus) sampling was carried out monthly during 2022 and 2023 to collect a representative number of females of different sizes, to investigate the blue crab's gonadal macroscopic and microscopic developrment of four different ecosistems with differents environmental conditions. The relationship betwen the gonadal development and other biological variables collected from each individual and environmental vaiables were established. The crabs were caught in diverse artesanal fishing gears used in the lagoon, all of them being set gears., [Methods for processing the data] All sampled crabs (nº=705) were stored at freezer for the laboratory analysis. Carapace Width Without Spines (CWWS mm) and Total body Weight (TW g) were recorded. Sex and sexual maturity were determined according to the shape of the telson. Later, crabs were dissected and gonads, hepatopancreas and egg mass weight using an electronic balance (0.001 g). Total fecundity were estimated by counting eggs from subsamples of the eggs sponge, and the results extrapolate to total sponge weight. For the microscopic study, gonads were stored in Davidson solution for the first 24 hours, then move and locate to cassettes with 70% ethanol. The gonads were subsequently processed for histological study using sections stained with hematoxylin and eosin.The maturity development status fwere stablished following Brown (2009)., The blue crab (Callinectes sapidus) is an invasive species originating from the east coast of the United States, that has established itself in various parts of the Mediterranean, including the Spanish coast. The available information on the biology and ecology of this species in our waters remains very limited, especially considering the potential negative impact on protected and commercial species, as well as on the overall functioning of the invaded ecosystems. The complex life cycle of C. sapidus will be studied simultaneously in five different environments: freshwater (Ebro River, Albufera de Valencia); hypersaline lagoons (Santa Pola Salinas and Mar Menor); a transitional estuarine zone (mouth of the Segura River, Alfacs Bay, and Encanyissada lagoon in the Ebro Delta); oligohaline and freshwater areas in El Hondo; and marine zones (Cullera, Gandia, Guardamar, and marine waters off the Ebro Delta and San Pedro del Pinatar). This will allow us to compare how different blue crab populations behave based on various environmental abiotic factors and human pressures, and to determine which conditions are most favorable for the species in western Mediterranean. The collected data have been used to conduct a study on the reproductive phenology in the mentioned ecosystems. Blue crab sampling was carried out monthly during 2022 and 2023, aiming to collect a representative number of females of different sizes for studying the macroscopic and microscopic gonadal development. The relationship between gonadal development and other biological and environmental variables recorded from each individual was established. The crabs were captured using different artisanal fishing methods, all of which are artisanal types. All sampled crabs (n=705) were stored in a freezer for laboratory analysis. The carapace width with and without spines (CWS, CWWS, mm) and total body weight (TW, g) were recorded. Sex and sexual maturity were determined based on the shape of the telson. Subsequently, the crabs were dissected, and the gonads, hepatopancreas, and egg mass were weighed with an electronic balance (0.001 g) to calculate the Gonad Index (IGS), Hepatopancreas Index (HIS), and fecundity. For histological study, the gonads were stored in Davidson’s solution for the first 24 hours, then transferred to 70% ethanol. The gonads were processed for histological examination through sections stained with hematoxylin and eosin. The results show that the proportion of ovigerous females is similar to that found in the eastern Mediterranean but lower than that in the Atlantic. The reproductive season peaks in September, as observed in other studies conducted in the Mediterranean. Considering the inverse relationship between the IGS and the HSI, it is suggested that part of the energy stored in the liver (glycogen) is used for gonadal tissue synthesis. On the other hand, salinity and temperature could be used as predictors of maturity development status as has been found in others studies (Mente, 2008). In further researches it will be included new explicative variables in order to improve the adjustment of the models., Agencia Estatal de Investigación, PID2020-118476RR-C22., File List: ECESIS WP5- SP2 Reproductive phenology and adult migration. Task 5.4. Macroscopic and microscopic study of female gonads, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Ultrasound Breast images denoising using Generative Adversarial Networks (GANs) [Dataset]

  • Jiménez-Gaona, Yuliana
  • Rodríguez-Álvarez, María José
  • Escudero, Líder
  • Sandoval, Carlos
  • Lakshminarayanan, Vasudevan
Ultrasound imaging plays an important role in screening early detection and breast cancer diagnosis. However, speckle noise affects medical ultrasound images and degrades the visual radiologic evaluation, which generally causes several difficulties in identifying the malignant and benignant regions. Denoising is an important step in preprocessing medical images, because it restores the maximum details preserving edges and all information of the images, achieving successful accuracy in anomalies classification. To reduce the speckle noise and retain image features well, we proposed two GANs models to breast ultrasound speckle denoising as preprocessing image, (i) Conditional GAN and (ii) WGAN. The better denoising image quality was measured by peak signal to noise ratio (PSNR) and structural similarity index (SSIM). The experimental analysis clearly shows that the CGAN method achieves better visual image quality in terms of PSNR=38.18 dB and SSIM= 0.96 with respect to WGAN model (PSNR=33.0068 dB and SSIM=0.91) on the small Ultrasound training datasets. Thus, we conclude that GANs can help in denoising ultrasound medical imaging, and as a future work these data can be used as computer system input for image segmentation and classification, reducing the hand-dependence and helping radiologists to improve breast cancer detection., Ministerio de Educación y Formación Profesional PID2019-107790RB-C22 MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Untargeted metabolomics analysis of RPE cells during six month in culture

  • González-Iglesias, Héctor
Primary RPE cell cultures were established with human fetal RPE cells acquired from ScienCell (Cat. No, 6540) seeded at passage 3 (P3) in 12-well Transwell® inserts (Corning Inc., Cat. No. CLSS3460) coated with 2% v/v Geltrex® matrix (Thermo Fisher Scientific; Cat. No. A1413202). Cells were cultured for a total time of 6 months (25 weeks), following the same protocol as previous works (16,59). Samples were acquired for protein immunolocalization, transcriptomic and metabolomics analysis from independent cell cultures along the total 6 months culture time (specifically at 4, 12, 17 and 25 weeks in culture), collecting 3 biological replicates per type of analysis and time point. Cell metabolites were quenched and extracted using MeOH:H2O (80:20, -20ºC) containing a spiked solution of isotopically enriched low molecular mass internal standard. Quality control (QC) samples were prepared by creating a pool of equal volumes from each biological replicate and were analyzed after a blank solution every fifth sample to monitor the performance, stability, and reproducibility of the LC-MS run. A liquid chromatography (LC) system 1290 Infinity II (Agilent Technologies) was coupled to an Agilent 6560B Ion Mobility quadrupole-time-of-flight mass spectrometer (IM-QTOF-MS) equipped with an Agilent G1607A dual jetstream ESI source and the MassHunter WorkSation 11.0. A reference solution containing purine and hexakis(1H,1H,3H-tetrafluoropropoxy)phosphazene for mass correction was added using the second ESI source. Chromatographic, ion source and MS conditions were optimized using QCs and selected parameters are shown in Supporting Information. MS analysis was conducted with an untargeted approach, operating the instrument in both positive and negative ionization modes. All samples were analysed in a randomized order. Raw data was processed using the software Profinder B10.00 (Agilent) and refined data were exported as CEF files. Data were converted to mzml files using MS convert., Ministerio de Ciencia, Innovación y Universidades MCIN/AEI/ 10.13039/501100011033 PID2022-137319OB-C2, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Raw data employed in the study: 'Hexadecylamine addition promotes crystallization-driven functionalities in freezing-thawing PVA hydrogels'

  • Alvear-Jiménez, Alexis
  • Fernández, Mercedes
  • Müller, Alejandro J.
  • Hernández, Rebeca
[Description of methods used for collection/generation of data] All measurements were performed under standard conditions, except for those experiments involving temperature ramps., [Methods for processing the data] The data have been organized to improve visualization. Each .dat file in the WAXS dataset corresponds to one degree in the temperature ramp, e.g., 0000 = 10°C, 0001 = 11°C, ..., 0070 = 80°C, This dataset contains raw data from hydrogels obtained through freeze-thawing cycles of aqueous solutions of polyvinyl alcohol (PVA) and its blends with hexadecylamine. The data were collected using a range of experimental techniques including Wide Angle X-ray Scattering (WAXS), Raman spectroscopy, Differential Scanning Calorimetry (DSC), and rheological measurements., This research was financially supported by the projects PID2020-113045GB-C21 and C22 and PID2023-149734NB-C21 and C22 funded by MCIU/ AEI/10.13039/501100011033. FPI contract (PRE2021-100838) and ALBA synchrotron granted proposal AV-2023097792, -WAXS_PVA_ASPREPARED -WAXS_PVA_PARTIALLYDRIED -WAXS_PVAC16_3_ASPREPARED - WAXS_PVAC16_3_PARTIALLYDRIED - ADHESION - DSC - RAMAN_SPECTRA - RHEOLOGY_STRAINFREQUENCY_ANNEALED - RHEOLOGY_STRAINFREQUENCY_ASPREPARED - RHEOLOGY_TEMPERATURE_ANNEALED - RHEOLOGY_TEMPERATURE_ASPREPARED, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Replication data for Characterization of new silicon carbide neutron detectors with thermal and fast neutrons, Pérez, M., Zamorano, F., Fleta, C., Fernández, B., Guerrero, C., Godignon, P.,Pellegrini, G., Pérez-Maroto, P., Guardiola, C. (2024, December). Characterization of new silicon carbide neutron detectors with thermal and fast neutrons [Data management plan]; versión 1

  • Pérez, Martín
  • Zamorano, Felipe
  • Fleta, Celeste
  • Fernández, Begoña
  • Guerrero, Carlos
  • Godignon, Philippe
  • Pellegrini, Giulio
  • Pérez-Maroto, Pablo
  • Guardiola Salmerón, Consuelo
There will not be restrictions to use the generated data after its publication, but external users will be asked to cite the source and/or the papers properly, and the redistribution of the data must be authorized by the researcher/supervisor. The identity of the person accessing the data will be ascertained with the following questionnaire, there won't be a need for a data access committee., Raw data obtained with SiC neutron detectors for the paper: "Characterization of new silicon carbide neutron detectors with thermal and fast neutrons”, European Union Horizon 2022 research and innovation programme under the Marie Sklodowska Curie grant agreement N◦ 101106191 [SiCNeutronFlash]. Consejo de Seguridad Nuclear (CSN) under the project Subvenciones 2022 SUB-08. Spanish Ministry of Science, Innovation and Universities grant number CEX2023-001397-M, and by the European Union’s ERDF program (MCIN/AEI/10.13039/501100011033/) ‘‘A way of making Europe’’ under grant references RTC-2017-6369-3 (FEDER/EU), and PID2021-124660OB-C22., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Replication data for The effects in fabrication and performance of carbon doping on IMB-CNM manufactured LGADs, Jairo Villegas, Viveka Gautam, Neil Moffat, Lucía Castillo, Giulio Pellegrini, Sebastian Grinstein, Salvador Hidalgo, The effects in fabrication and performance of carbon doping on IMB-CNM manufactured LGADs [Data management plan]; versión 1

DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Replication data for nLGAD gain response to low-penetrating particles, Villegas, J., Torres, C., Manojlovic, M., Jimenez-Ramos, M. C., Moffat, N., Lopez, J. G., & Hidalgo, S. (2025, March). nLGAD gain response to low-penetrating particles [Data management plan]; versión 1

  • Villegas, Jairo
  • Torres Muñoz, Carmen
  • Manojlovic, Milos
  • Jiménez-Ramos, M. C
  • Moffat, Neil
  • García López, J.
  • Hidalgo, Salvador
There will not be restrictions to use the generated data after its publication, but external users will be asked to cite the source and/or the papers properly, and the redistribution of the data must be authorized by the researcher/supervisor. The identity of the person accessing the data will be ascertained with the following questionnaire, there won't be a need for a data access committee., Raw data obtained with nLGAD silicon detectors fabricated at IMB-CNM-CSIC for the paper: "nLGAD gain response to low-penetrating particles”, Spanish Ministry of Science, Innovation and Universities (MICIU/AEI/10.13039/501100011033/) and by the European Union’s ERDF program “A way of making Europe”. Grant references: CEX2023-001397-M, PID2020-113705RB-C32, PID2021-124660OB-C22, PDC2021-121718-C32 and PDC2023-145925-C32 European Union’s Horizon 2020 Research and Innovation. Grant Agreement No. 101004761 (AIDAInnova) NextGenerationEU, Spain (PRTR-C17.I1). CNA is also partially funded by the ASTRO21/1.1/1 (European Union- NextGenerationEU, the Ministry of Science, Innovation and Universities, Recovery Plan, Transformation and Resilience, Spain, the Department of University, Research and Innovation of the Junta de Andalucia and the University of Sevilla)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Replication data for Gain measurements on NLGAD detectors, Jairo Villegas, Neil Moffat, Dzmitry Maneuski, Oscar Ferrer, Giulio Pellegrini, Salvador Hidalgo, Gain measurements on NLGAD detectors [Data management plan]; versión 1

  • Villegas, Jairo
  • Moffat, Neil
  • Manueski, Dzmitry
  • Ferrer, Oscar
  • Pellegrini, Giulio
  • Hidalgo, Salvador
There will not be restrictions to use the generated data after its publication, but external users will be asked to cite the source and/or the papers properly, and the redistribution of the data must be authorized by the researcher/supervisor. The identity of the person accessing the data will be ascertained with the following questionnaire, there won't be a need for a data access committee, Raw data obtained with nLGAD silicon detectors fabricated at IMB-CNM-CSIC for the paper: "Gain measurements on NLGAD detectors”, Spanish Ministry of Science, Innovation and Universities (MICIU/AEI/10.13039/501100011033/) and by the European Union’s ERDF program “A way of making Europe”. Grant references: RTI2018-094906-B-C22 and PID2020-113705RB-C32. European Union’s Horizon 2020 Research and Innovation. Grant Agreement No. 101004761 (AIDAInnova)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

DATASET Atroposelective Synthesis of 2-(Quinolin-8-yl)benzyl Alcohols by Biocatalytic Dynamic Kinetic Resolutions

  • Coto-Cid, Juan M.
  • de Gonzalo, Gonzalo
  • Carmona, José A.
  • Iglesias-Sigüenza, Javier
  • Rodríguez-Salamanca, Patricia
  • Fernández, Rosario
  • Hornillos, Valentín
  • Lassaletta, José M.
Crystallographic data, spectroscopic data and experimental details, A highly enantioselective biocatalytic dynamic kinetic resolution (DKR) of 2-(quinoline-8-yl) 3-methylbenzaldehydes and 1-naphthaldehydes is described. The reaction proceeds by atroposelective carbonyl reduction catalyzed by commercial ketoreductases (KREDs), generally reaching high conversions and excellent enantiomeric excesses. Both atropoisomers of the final alcohols can be obtained by a proper selection of the biocatalyst. The DKR strategy relies in the racemization of the stereogenic axis that takes place thanks to a transient Lewis acid-base interaction (LABI) between the nitrogen in the quinoline and the carbonyl group. © 2024 The Authors. Advanced Synthesis & Catalysis published by Wiley-VCH GmbH., PID2019-106358GB C21, PID2019-106358GB C22,RYC-2017-22294 (AEI), P18-FR-3531, P18- FR-644, US-1262867, and US-1260906 (Junta de Andalucía), Funding Acquisition: Rosario Fernández, Valentín Hornillos, and José M. Lassaletta;, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

DATASET Axially Chiral N-Oxide Catalysts for the Allylation and Crotylation of Aromatic Aldehydes: Exploiting Nonlinear Effects

  • Romero-Arenas, Antonio
  • Ramírez-López, Pedro
  • Iglesias-Sigüenza, Javier
  • Fernández, Rosario
  • Ros, Abel
  • Lassaletta, José M.
Crystallographic data, spectroscopic data and experimental details, PID2019–106358GB- C21, PID2019–106358GB-C22, PID2022–137888NB-I00, PID2022–143230NB-I00 (AEI) and P18-FR-3531, P18-FR-644, and US-1262867 (Junta de Andalucía), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Replication data for Position-resolved charge collection of silicon carbide detectors with an epitaxially-grown graphene layer, Lopez Paz, I., Godignon, P., Moffat, N. et al. Position-resolved charge collection of silicon carbide detectors with an epitaxially-grown graphene layer. Sci Rep 14, 10376 (2024)

  • Lopez Paz, Ivan
  • Godignon, Philippe
  • Moffat, Neil
  • Pellegrini, Giulio
  • Rafí, Joan Marc
  • Rius, Gemma
Silicon carbide (SiC) has outstanding physical properties therefore, diodes based on SiC are being considered for many radiation detection applications such as particle accelerator experiments and medical dosimetry. Moreover, by reducing the metal on the surface of the diode there is the potential to enhance its performance in some fields where the presence of metal is detrimental. To this end, SiC detectors with an epitaxially-grown graphene layer (EG), that substitutes the metallic contact, in the sensitive region were produced at IMB-CNM, profiting from the conductivity of the mono-atomic layer material. To isolate the effect of the graphene on the charge collection, samples without graphene were produced in parallel. In this paper, the effect of EG on Silicon Carbide p-in-n radiation detectors is studied in terms of charge collection with a radioactive source and by means of the transient current technique (TCT), which allows for position-dependent signal formation analysis. As a result of the former, we show the capability of the EG-SiC sensor for charge collection after signal integration, to a resolution close to that of a sensor fully metallised. Moreover, from the TCT studies, we observe uniform charge collection across the active region, as well as an up-to ∼40% transient amplitude damping which, compared with the ∼90% on the sample containing no metallic contact, proves that the presence of graphene benefits the performance of the device and that the technology is viable for radiation detection as an alternative to metal. © The Author(s) 2024., This work has been funded by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033/) and by the European Union\u2019s ERDF program \u201CA way of making Europe\u201D.Grant references: PID2021-124660OB-C22 and by the European Union\u2019s Horizon 2020 Research and Innovation funding program, under Grant Agreement No. 101004761 (AIDAInnova). Support from Ayudas Ramon y Cajal Ref. RYC-2016-21412 is also acknowledged., The transient signals obtained under the triple-alpha radioactive source set-up are shown in Fig. 5. The waveforms obtained from all samples showcase a dip after the main transient pulse attributed to an impedance mismatch, causing a reflection. The integration window in Sample-1M was chosen before this undershoot, since the pulses from charge collection are faster. However, as the signals are longer in the other samples, the integration window for the charge determination is chosen longer, which in turn results in an under-estimation of the charge collection. Amplitude distribution for all samples under a bias voltage of -500 V are shown in Fig. 6 (left). Notably, Sample-1 has an overall lower amplitude distribution, although Sample-1M is the only detector showcasing the three peaks expected from the three alpha particle energies from the radioactive source. However - after integration - the same features appear in Sample-1G, as shown in Fig. 6 (right). As it will be observed in the following sections in more detail, the apparent charge collection loss in Sample-1 is a result of the higher resistance observed by the transient signal before reaching the bias ring with respect to the other samples, which reduces the waveform amplitudes away from it, to the point where noise is a large contribution in the integration. A 30 ns extra integration window was used in Sample-1 in order to recover charge levels comparable to Samples-1G and -1M. The same damping effect is seen in Sample-1G to a lesser degree., No