Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 453
Encontrada(s) 5 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of virtual running with exercise on functionality in pre-frail and frail elderly people: randomized clinical trial

  • Mollà-Casanova, Sara
  • Muñoz-Gómez, Elena
  • Sempere-Rubio, Núria
  • Inglés, Marta
  • Aguilar-Rodríguez, Marta
  • Lopez Pascual, Juan
  • Serra Añó, Pilar
  • Page Del Pozo, Alvaro Felipe|||0000-0002-5432-310X
[EN] Background Virtual mirror therapies could increase the results of exercise, since the mirror neuron system produces an activation of motor execution cortical areas by observing actions performed by others. In this way, pre-frail and frail people could use this system to reach an exercise capacity threshold and obtain health benefits. Aim The aim of this study is to evaluate the effects of a virtual running (VR) treatment combined with specific physical gait exercise (PE) compared to placebo VR treatment combined with PE on functionality, pain, and muscular tone in pre-frail and frail older persons. Methods A single blinded, two-arm, randomised controlled trial design was employed. Thirty-eight participants were divided into two intervention arms: Experimental Intervention (EI) group, in which VR and gait-specific physical exercises were administered and Control Intervention (CI) group, in which a placebo virtual gait and the same exercise programme was administered. Functionality, pain, and tone were assessed. Results EI group improved in aerobic capacity, functional lower-limb strength, reaction time, and pain, while CI group remained the same. Regarding static balance and muscle tone, no differences were found for either group. Further analysis is needed to asses VR effectiveness for improving gait, stand-up and sit-down performance and velocity. Conclusions Virtual running therapy appears to enhance capacities related with voluntary movements (i.e., aerobic capacity, functional lower-limb strength, and reaction time) and reduce pain., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work was supported by La Generalitat Valenciana, Conselleria d'Innovació, Universitats, Ciència i Societat (CIAICO/2021/215); and by La Universitat de València (INV19-01-13-07).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Spark plasma sintering of beta-Eucryptite/alumina nanocomposites with low thermal expansion and improved mechanical properties obtained by colloidal route

  • López-Santos, N.
  • Díaz, L.A.
  • Fernández, A.
  • Suárez, M.
  • Benavente Martínez, Rut|||0000-0002-4566-9475
[EN] In this study, (3-Eucryptite/alumina nanocomposites were synthesized using colloidal methods and sintered by Spark Plasma Sintering (SPS). Nanocomposites with three different alumina contents (2.5, 5 and 10 wt%) were prepared, with pure (3-Eucryptite serving as a reference material. The microstructural characteristics of the nanocomposites were analyzed, and their mechanical properties (Young's modulus, hardness, flexural strength, fracture toughness) were evaluated. The incorporation of alumina nanoparticles effectively controlled the grain growth of (3-Eucryptite during the sintering process, resulting in a fine-grained structure. Compared to monolithic (3-Eucryptite, the nanocomposites exhibited significant enhancements in mechanical performance: hardness increased by at least 25 %, fracture toughness improved by 30 %, and mechanical strength rose by more than 40 %. Furthermore, the composites demonstrated a very low thermal expansion coefficient, making them promising candidates for a wide range of industrial applications., Authors acknowledges the financial support received through projects 3D-BoneWhey (PID2023-147490OB-I00) financed by MICIU/AEI/10.13039/501100011033, FreeSin (PID2021-128548OB-C21 & C22) , financed by MCIN/AEI/10.13039/501100011033, and MiLi (ID.101082451) financed by Horizon-CL4-2022-Space-01. The authors also thank Generalitat Valenciana for the funding CIAICO/2023/264.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Validation of an imageless electrocardiographic imaging technique for the non-invasive mapping of regular atrial tachyarrhythmias

  • Reventós-Presmanes, Jana
  • Cano-Cabañero, Andrea
  • Invers-Rubio, Eric
  • Pellicer-Sendra, Berta
  • Serrano-Campaner, Jaume
  • Zacur, Ernesto
  • Althoff, Till F
  • Hernández-Romero, Ismael
  • Borràs, Roger
  • Regany-Closa, Mariona
  • Arbelo, Elena
  • Guasch, Eduard
  • Tolosana, Jose María
  • Porta-Sánchez, Andreu
  • Herrero-Martín, Clara|||0000-0001-5053-296X
  • Andreu M. Climent|||0000-0002-7260-8811
  • Guillem Sánchez, María Salud|||0000-0001-5660-3693
[EN] This study validates the clinical performance of an imageless ECGi system for the characterization of regular atrial tachyarrhythmias. Its ability to provide rapid, full-chamber activation maps from a single beat may make it a potential solution for mapping transient arrhythmias or rhythm changes during ablation procedures., This project has been funded by grants PID2023-149812OB-I00, DIN2024-013365, PTQ2023-013018, PTQ2022-012632, RYC2018-024346-I, CNS2022-135512, and CPP2023-010504 funded by Ministerio de Ciencia, Innovacion y Universidades MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/Plan de Recuperacion, Transformacion y Resiliencia. This project has been funded by Generalitat Valenciana by grants ACIF/2021/205 and CIAICO/2022/020 and by European Social Fund Investing in Your Future. This project also received funding from European Institute of Innovation and Technology (EIT Health) (activity codes 220385, 230129, and 250027). Additionally, this work was supported by a research grant from Instituto de Salud Carlos III, which is co-funded by the European Union (grant PI22/00441). J.-B.G. acknowledges support from the grants 'Contractes d'Investigacio Avancada Fundacio BBVA' - Hospital Clinic Barcelona Joan Rodes-Josep Baselga 2022' (HCB_BIO_001/2) and the 'Daniel Bravo Andreu Private Foundation 2024 Grants' for short stays abroad in biomedical research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Complexity and recurrence of body surface electrocardiograms correlate with estimated reentrant atrial activity using electrocardiographic imaging in atrial fibrillation patients

  • Molero-Alabau, Rubén
  • Meste, Olivier
  • Peeters, Ralf
  • Karel, Joël
  • Bonizzi, Pietro
  • Guillem Sánchez, María Salud|||0000-0001-5660-3693
[EN] Background Complexity and signal recurrence metrics obtained from body surface potential mapping (BSPM) allow quantifying atrial fibrillation (AF) substrate complexity. This study aims to correlate electrocardiographic imaging (ECGI) detected reentrant patterns with BSPM-calculated signal complexity and recurrence metrics. Methods BSPM signals were recorded from 28 AF patients (17 male, 11 women, 62.69 +/- 8.09 y.o.), followed by ECGI calculation. Signal complexity and recurrence metrics were computed on BSPM and ECGI signals. Rotors per second and rotor duration were computed on ECGI signals for each atrium and the whole atrial surface. Correlation between BSPM metrics and ECGI reentrant patterns for the entire atrial surface and for left atrium (LA) and right atrium (RA) were analyzed. Results Atrial complexity and recurrence metrics strongly correlated when computed on BSPM and ECGI. Higher sample entropy and relative harmonic energy (RHE) correlated with rotors of short duration. The highest dominant frequency of the ECGI signals did not correlate with the reentrant activity of the ECGI. Higher short- and long-term recurrence of BSPM signals correlated with longer duration rotors, particularly for long-term recurrence (r(LA)=0.74 vs. r(RA)=0.42). Only ECGI-based reentrant parameters showed higher LA complexity compared to RA (p < 0.05). Conclusions BSPM metrics strongly correlate with metrics measured on ECGI signals. BSPM metrics indicate a more elevated atrial electro-structural remodeling aligned with more short-duration rotors from ECGI computations. Although BSPM delivers qualitative AF reentry data, ECGI remains essential for identifying regional substrate complexity., This work was supported by: Instituto de Salud Carlos III (supported by FEDER Fondo Europeo de Desarrollo Regional PI17/01106), Generalitat Valenciana and European Social Fund (ACIF/2020/265, BEFPI/2021/062, CIAICO/2022/020), Agencia Estatal de Investigacion PID2020-119364RB-I00, PID2023-149812OB-I00 and CPP2021-008562 by "European Union NextGenerationEU/PRTR". This research has received funding from the European Institute of Innovation and Technology (EIT) under grant agreement No 220385. This European body receives support from the Horizon 2020 research and innovation programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Biased-Randomized Algorithm for the Bi-Objective Capacitated Dispersion Problem with Symmetries

  • Gómez, Juan F.
  • Calvet, Laura
  • Ammouriova, Majsa
  • Wenwen, Chen
  • Juan, Angel A.|||0000-0003-1392-1776
[EN] Given a network of nodes and a certain demand that needs to be satisfied, the capacitated dispersion problem (CDP) involves selecting a subset of nodes to maximize dispersion between them. In many practical instances, symmetry in the structure of the selected nodes (e.g., using nodes of the same type) can lead to synergies. Hence, this paper studies a bi-objective variant of the CDP to account for these symmetries. The first goal seeks to maximize the minimum distance between opened nodes, while the second goal accounts for symmetry by penalizing the use of nodes of different types (in our case, represented by different colors). We formalize the problem as a bi-objective mathematical program and address it through a classical multiobjective strategy, the & varepsilon;-constraint method. Exact methods are used when the problem size allows, even though the problem is NP-hard. To tackle larger instances, we design a biased-randomized algorithm based on a constructive heuristic. Computational experiments show that our biased-randomized algorithm provides high-quality approximations of the Pareto frontier., This work has been partially supported by the Spanish Ministry of Science, Innovation and Universities/AEI (PID2022-138860NB-I00, AIA2025-163553-C44) and the Generalitat Valenciana (2024 CIAICO 117).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evolution of the microstructure and mechanical properties of zirconia-based composites sintered by microwave technology

  • Bonilla-Molina, Ashley
  • Penaranda-Foix, Felipe L.|||0000-0003-4012-0763
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Moreno, Rodrigo
[EN] This work aims to produce zirconia-based materials by microwave sintering process for dental and prosthetic applications. Two compositions were evaluated: alumina-toughened-zirconia with 25 wt.% Al2O3, stabilized with 10.5 wt.%(Ce, Y), and yttria-stabilized-zirconia (5.4 wt.% Y2O3). The microstructural evolution and its influence on their mechanical properties were analyzed. The composites were sintered by conventional sintering at 1400 and 1500 ¿C with 2 h dwelling, and by microwave sintering at 1200 and 1300 ¿C with 10- and 15-min dwell times, resulting in fully densified ceramics. Relative densities are > 97% and HV higher than 11 GPa for all compositions and sintering conditions. The FESEM images confirm the formation of platelets at higher temperatures, which results in an increase in fracture toughness from 5.0 to 8.2 MPa¿m1/2. The low-thermal-degradation indicates that the composite performs well and that the tetragonal-to-monoclinic transformation is absent after 40 h of ageing, making this material suitable for dental and prosthetic applications., This publication is part of the grant CNS2023 144190 funded by MICIU/AEI/ 10.13039/501,100,011,033 and by the European Union NextGenerationEU/PRTR . CIGRIS/2022/077 and CIAICO/2023/264 projects funded by Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Monitoring Cloud Services through Models at Runtime: A Case in an Ambient Assisted Living Environment

  • Cedillo, Priscila
  • Insfran, Emilio|||0000-0003-0855-5564
  • Abrahao Gonzales, Silvia Mara|||0000-0003-3580-2014
[EN] Ambient Assisted Living (AAL) has become an important domain that provides software systems and services to support and improve people¿s daily quality of life. Yet, it has not achieved large market penetration. Existing works suggest that this is primarily due to not sufficiently addressing the quality requirements posed by healthcare organizations. In particular, there is a lack of comprehensive frameworks that allow the assessment of the quality of AAL systems. In previous work, we introduced a method for monitoring cloud services using models at runtime (MoS@RT), which allows the monitoring requirements or the metric operationalizations of these requirements to be changed at runtime without the modification of the underlying infrastructure. The method and its supporting infrastructure have been successfully applied in the monitoring of cloud services, but further evaluation in other domains is needed. In this paper, we report a case study on the use of MoS@RT to monitor cloud services in an AAL environment aimed at supporting the elderly¿s well-being. The results suggest that relevant quality attributes of AAL systems can be adequately monitored using MoS@RT and that the report generated by the monitoring infrastructure is useful for service providers and customers to help them ensure that cloud services meet the required levels of quality., We thank to Fundación Carolina, Universidad de Cuenca, and Universitat Politècnica de València for their support. This research is supported by the project Fog Computing applied to monitoring devices used in AAL environments: platform for the elderly (Research Projects DIUC XVII).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modified Active Disturbance Rejection Predictive Control: A fixed-order state-space formulation for SISO systems

  • Martínez-Carvajal, Blanca Viviana
  • Sanchís Saez, Javier|||0000-0001-9697-2696
  • Garcia-Nieto, Sergio|||0000-0002-2722-742X
  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
[EN] This paper presents a novel control strategy that provides active disturbance rejection predictive control on constrained systems with no nominal identified model. The proposed loop relaxes the modelling requirement to a fixed discrete-time state¿space realisation of a first-order plus integrator plant despite the nature of the controlled process. A third-order discrete Extended State Observer (ESO) estimates the model mismatch and assumed plant states. Moreover, the constraints handling is tackled by incorporating the compensation term related to the total perturbation in the definition of the optimisation problem constraints. The proposal merges in a new way state¿space Model Predictive Control (MPC) and Active Disturbance Rejection Control (ADRC) into an architecture suitable for the servo-regulatory operation of linear and non-linear systems, as shown through validation examples., This work has been supported by MCIN/AEI/10.13039/501100011033 [Project PID2020-120087GB-C21] , MCIN/AEI/10.13039/501100011033 [Project PID2020-119468O-I00] , the Generalitat Valenciana regional government, Spain [Project CIAICO/2021/064] , and the Ministry of Science, Technology and Innovation of Colombia [scholarship programme 885] .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Evaluación de la edad de razonamiento de LLMs en las Pruebas Cangur de la Comunitat Valenciana

  • Igualde-Sáez, Arnau|||0009-0009-0824-6957
  • Rhomrassi-Amhar, Lamyae
  • Hoyas, Sergio|||0000-0002-8458-7288
  • García Sabater, José Pedro|||0000-0002-9097-2852
  • Fullana Alfonso, Màrius Josep|||0000-0002-0196-7876
  • Conejero, J. Alberto|||0000-0003-3681-7533
  • Ahsini, Y.
  • Vinuesa, R.
[CA] Aquest estudi analitza l'eficàcia dels models de llenguatge profund (LLMs) de IA per a resoldre problemes de matemàtiques mitjançant una avaluació d'una bateria de preguntes en valencià, avaluant tant la precisió com la coherència dels raonaments generats. Per a això, s'ha generat un dataset amb els enunciats extrets per OCR de les edicions 2014/2024 de les Proves Cangur, normalitzat en CSV i avaluat mitjançant prompts sistemàtics idèntics per a tots els models. DeepSeek, GPT-4o i LLaMA 3.3-70B lideren la taxa d'encert, aconseguint un rendiment superior al 90% en preguntes de purament textuals sense igualar completament la precisió humana, la qual cosa subratlla àrees clau per a la innovació pedagògica i futurs desenvolupaments en entrenament multilingüe i adaptatiu., [ES] Este estudio analiza la eficacia de los modelos de lenguaje profundo (LLMs) de IA para resolver problemas de matemáticas mediante una evaluación de una batería de preguntas en valenciano, evaluando tanto la precisión como la coherencia de los razonamientos generados. Para ello, se ha generado un dataset con los enunciados extraídos por OCR de las ediciones 2014/2024 de las Pruebas Cangur, normalizado en CSV y evaluado mediante prompts sistemáticos idénticos para todos los modelos. DeepSeek, GPT-4o y LLaMA 3.3-70B lideran la tasa de acierto, alcanzando un rendimiento superior al 90 % en preguntas de puramente textuales sin igualar completamente la precisión humana, lo que subraya áreas clave para la innovación pedagógica y futuros desarrollos en entrenamiento multilingüe y adaptativo.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Integrated membrane process in organic media: combining organic solvent ultrafiltration, nanofiltration, and reverse osmosis to purify and concentrate the phenolic compounds from wet olive pomace.

  • Sánchez-Arévalo, Carmen María|||0000-0001-6357-8107
  • Vincent Vela, Maria Cinta|||0000-0001-8493-0165
  • Alvarez Blanco, Silvia
  • Aldegheri, Fausto
[EN] Phenolic compounds from a hydroalcoholic extract of wet olive pomace were purified and concentrated by an integrated membrane process in organic media. First, UF010104 (Solsep BV) and UP005 (Microdyn Nadir) membranes were tested to be implemented in the ultrafiltration stage, with the aim of purifying the extract and obtaining a permeate enriched in phenolic compounds. Despite the high flux observed with the UF010104 membrane (20.4 ± 0.7 L·h¿1·m¿2, at 2 bar), the UP005 membrane was selected because of a more suitable selectivity. Even though some secoiridoids were rejected, the permeate stream obtained with this embrane contained high concentrations of valuable simple phenols and phenolic acids, whereas sugars and macromolecules were retained. Then, the ultrafiltration permeate was ubjected to a nanofiltration step employing an NF270 membrane (DuPont) for a further purification and fractionation of the phenolic compounds. The permeate flux was 50.2 ± 0.2 L·h¿1·m¿2, working at 15 ar. Hydroxytyrosol and some phenolic acids (such as vanillic acid, caffeic acid, and ferulic acid) were recovered in the permeate, which was later concentrated by reverse osmosis employing an F90 membrane. The permeate flux obtained with this membrane was 15.3 ± 0.3 L·h¿1·m¿2. The concentrated phenolic mixture that was obtained may have important applications as a powerful ntioxidant and for the prevention of diabetes and neurodegenerative diseases., This research was funded by Generalitat Valencia, grant number CIAICO/2021/333. Additionally, a predoctoral grant PRE2018-08524 was funded by the Spanish Ministerio de Ciencia e Innovación (MCIN) /Agencia Estatal de Investigación (AEI)/10.13039/501100011033 and by European Social Fund (ESF) Investing in your future.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Topological effects in ultrafast photoinduced processes between flurbiprofen and tryptophan in linked dyads and within human serum albumin

  • Tamarit-Mayo, Lorena
  • Jiménez, M Consuelo|||0000-0002-8057-4316
  • Vayá Pérez, Ignacio|||0000-0003-1682-9342
  • García-Gabarda, Laura
  • Miranda, Miguel A.
[EN] The interaction dynamics between flurbiprofen (FBP) and tryptophan (Trp) has been studied in covalently linked dyads and within human serum albumin (HSA) by means of fluorescence and ultrafast transient absorption spectroscopy. The dyads have proven to be excellent models to investigate photoinduced processes such as energy and/or electron transfer that may occur in proteins and other biological media. Since the relative spatial arrangement of the interacting units may affect the yield and kinetics of the photoinduced processes, two spacers consisting of amino and carboxylic groups separated by a cyclic or a long linear hydrocarbon chain (1 and 2, respectively) have been used to link the (S)- or (R)-FBP with the (S)-Trp moieties. The main feature observed in the dyads was a strong intramolecular quenching of the fluorescence, which was more important for the (S,S)- than for the (R,S)- diastereomer in dyads 1, whereas the reverse was true for dyads 2. This was consistent with the results obtained by simple molecular modelling (PM3). The observed stereodifferentiation in (S,S)-1 and (R,S)-1 arises from the deactivation of (1)Trp*, while in (S,S)-2 and (R,S)-2 it is associated with (FBP)-F-1*. The mechanistic nature of (FBP)-F-1* quenching is ascribed to energy transfer, while for (1)Trp* it is attributed to electron transfer and/or exciplex formation. These results are consistent with those obtained by ultrafast transient absorption spectroscopy, where (FBP)-F-1* was detected as a band with a maximum at ca. 425 nm and a shoulder at similar to 375 nm, whereas Trp did not give rise to any noticeable transient. Interestingly, similar photoprocesses were observed in the dyads and in the supramolecular FBP@HSA complexes. Overall, these results may aid to gain a deeper understanding of the photoinduced processes occurring in protein-bound drugs, which may shed light on the mechanistic pathways involved in photobiological damage., Grant PID2020-115010RB-I00 funded by MCIN/AEI/10.13039/501100011033 and grant from Conselleria d'Innovacio, Universitats, Ciencia i Societat Digital (CIAICO/2021/061) are gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficiency of financial cooperatives. A structured review of the literature, Eficiencia de las cooperativas financieras. Una revisión estructurada de la literatura

  • Polo-Garrido, Fernando|||0000-0003-0158-5736
  • Vargas-Ulloa, Diana Evelyn
[ES] El objetivo de este estudio es proporcionar una completa panorámica de los modelos, las metodologías, las variables empleadas en la medición de la eficiencia financiera-social en estas entidades, sus factores determinantes, de las grandes temáticas sobre las que giran los estudios, así como de sus posibles gaps, por medio de una revisión estructurada de literatura. Se localizaron 67 fuentes bibliográficas multipaís (1992-2023) en las bases de datos WOS y SCOPUS. La revisión de los artículos permitió identificar diez temas: propiedad, eficiencia social, crisis, riesgo, determinantes, tamaño, fusiones y adquisiciones, metodologías, entradas-salidas y otros. Dentro de los principales hallazgos está el tipo de propiedad, se evidencia que la eficiencia varía según el contexto institucional (bancos, cooperativas, instituciones microfinancieras). La evidencia indica hasta el momento que las Cooperativas y las organizaciones no gubernamentales (ONG, en adelante) son menos eficientes que los Bancos e Instituciones Financieras no Bancarias (IFNB en adelante). El desempeño social y financiero pueden producir sinergias, sin embargo, las cooperativas que presentan mayor eficiencia financiera no son eficientes en su dimensión social o viceversa. La eficiencia en tiempos de crisis ha sido un factor de interés en los estudios de las cooperativas y estas han demostrado ser resilientes en estos tiempos. Los riesgos refiriéndose a los préstamos morosos (NPL, en adelante) reducen la eficiencia como también los riesgos de liquidez y solvencia. Respecto a los determinantes de eficiencia, la competencia, el territorio y los indicadores financieros: Capital, Activos, Administración, Rentabilidad y Liquidez (CAMEL, en adelante) son significativos en los estudios. El tamaño ha sido un factor característico, las cooperativas más grandes tienden a ser más eficientes no sólo económicamente si no también desde el punto de vista social. El Análisis Envolvente de Datos (DEA, en adelante) es la metodología más empleada para determinar la eficiencia de las cooperativas financieras a partir de unas entradas y salidas empleadas. Las fusiones y adquisiciones no mejoran la eficiencia y el factor que determina formar parte de estos procesos, es el menor tamaño de activos. Este estudio reveló la importancia de la eficiencia financiera y social, así como de sus factores determinantes en las cooperativas financieras. También se añaden líneas de investigación futura al detectarse lagunas en la literatura., [EN] The objective of this study is to provide a complete overview of models, methodologies, and variables used in the measurement of financial and social efficiency in financial entities, their determining factors, the main topics on which the studies revolve, as well as their possible gaps, through a structured literature review. Researched was done in 67 multi-country bibliographic sources (1992-2023) identified in the WOS and SCOPUS databases. The studies focused on ten topics: ownership, social efficiency, crisis, risk, determinants, size, mergers and acquisitions, methodologies, input-output and others. Among the main findings is the type of ownership, it is evident that efficiency varies according to the institutional context (banks, cooperatives, microfinance institutions). The evidence so far indicates that cooperatives and non-governmental organizations (hereafter NGOs) are less efficient than banks and Non-Banking Financial Institutions (hereafter, NBFIs). Social and financial performance can produce synergies; however, cooperatives that are more financially efficient are not efficient in their social dimension or vice versa. Efficiency in times of crisis has been a factor of interest in studies of cooperatives and they have proven to be resilient in these times. Non-Performing Loans (hereafter NPL) risks reduce efficiency as well as liquidity and solvency risks. With respect to the determinants of efficiency, competition, territory, and financial indicators: Capital, Asset, Management, Earning and Liquidity (hereafter CAMEL) are significant in the studies. Size has been a characteristic factor due to economies of scale; larger cooperatives tend to be more efficient not only economically but also from a social point of view. Data Envelopment Analysis (hereafter DEA) is the most used methodology to determine the efficiency of financial cooperatives based on the inputs and outputs used. Mergers and acquisitions do not improve efficiency and the determining in being part of these processes is the smaller asset size. This study revealed the importance of the financial efficiency and social efficiency as factors in financial cooperatives. Future lines of research are also added when gaps in the literature are detected., Fernando Polo-Garrido gratefully acknowledges financial support from Conselleria d Educacio, Universitats i Ocupacio, Generalitat Valenciana CIAICO/2022/075 (Spain) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An approach for the indirect determination of 238U and 232Th content in ceramic products based on gross alpha and gross beta measurement

  • Sáez-Muñoz, Marina|||0000-0003-0180-7167
  • Sánchez Galdón, Ana Isabel|||0000-0002-3159-8020
  • Pérez-Baeza, Mireia
  • Martorell Alsina, Sebastián Salvador|||0000-0003-1706-4740
  • Sevilla, A. J.
  • Ortiz Moragón, Josefina
[EN] The aim of this work was the development of a procedure for the indirect characterization of 238U and 232Th in ceramic products using the quantification of gross alpha and gross beta activities in a low background proportional counter, which is less time consuming and cheaper than the direct radiochemical methods and gamma spectrometry. The procedure was applied, first, to a reference material used to fine-tune the procedure and statistical techniques, and then, for two types of ceramic products: micronized zircon and zircon flour samples, and spray-dried ceramic powders (atomized). This procedure requires obtaining linear regression models for estimating the activity of 238U and 232Th as a function of specific gross alpha and gross beta measurements. Regression models must be obtained for each type of ceramic material together with the range of application of the model, which depend primarily on the ratio between 238U and 232Th activities. The applications to micronized zircon and zircon flours, and spray-dried ceramic powders demonstrated that the models obtained for the indirect characterization of 238U and 232Th activities explain more than 95% of the variability in the data. In addition, those models were used for predicting the results of new validation samples. Regarding the micronized zircon and zircon flours, predictions were good for the 238U activity with a relative bias of less than 10%, while they were not so accurate for the 232Th activity, with a relative bias of less than 15% for most of the samples. For spray-dried ceramic powders, the predictions were quite good for the 238U activity with a relative bias of less than 20% irrespective of the cluster to which the validation sample belongs, and similarly for the 232Th activity., The authors are grateful to the Generalitat Valenciana for the financial support received by funding the projects "Characterization and radiological measurement of suspended dust in the ceramic industry of the Valencian Region" (AICO/2020/106) and "Assessment of the radiological impact due to the presence of radioactive material in sus- pension in activities of the Valencian ceramic industry" (CIAICO/2021/290) . As well as to the FEDER funds (IDIFER/2021/047) for the support through grants for R & D & I infrastructure and equipment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Groups with triangle-free graphs on p-regular classes

  • Felipe Román, María Josefa|||0000-0002-6699-3135
  • Jean-Philippe, M.K.
  • Sotomayor, V.
[EN] Let p be a prime. In this paper, we classify the p-structure of those finite p-separable groups such that, given any three non-central conjugacy classes of p-regular elements, two of them necessarily have coprime lengths., The first and last authors are supported by Ayuda a Primeros Proyectos de Investigación (PAID-06-23) from Vicerrectorado de Investigación de la Universitat Politècnica de València (UPV), and by Proyecto CIAICO/2021/163 from Generalitat Valenciana (Spain). The results in this paper are part of the second author s Ph.D. thesis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Otros (Other)

Manual de usuario de la app lalaby-Glio: Monitorización de calidad de vida de pacientes con Tumor cerebral, Manual de usuario de la app lalaby-Glio

  • Asensio-Cuesta, Sabina|||0000-0003-0246-3773
  • Fuster García, Elíes|||0000-0002-0716-8960
  • Garcia-Gomez, Juan M
  • Sánchez-García, Daniel
  • Sánchez-García, Ángel|||0000-0003-1843-9209
  • Sáez Silvestre, Carlos|||0000-0003-2678-8249
  • Maestu, Inmaculada
  • Soria-Comes, Teresa
  • Soler, Jorge
  • De Julián-Campayo, María
[ES] La app Lalaby-Glio permite monitorizar en tiempo real la calidad de vida de pacientes con tumores cerebrales, recopilando datos objetivos y subjetivos que conforman el "Fenotipo Digital" (FD). A través de sensores del móvil, la app evalúa la actividad física (movimiento, desplazamientos, pasos), interacción social (frecuencia de voz) y exposición al ruido y la luz. Además, incluye un cuestionario diario que recoge horas de sueño, síntomas y su frecuencia, y limitaciones al caminar, diseñado por oncólogos expertos en tumores cerebrales. La app también integra los cuestionarios estandarizados EORTC QLQ-C30, que mide la calidad de vida general, y BN20, específico para pacientes con tumores cerebrales. Un sistema de notificaciones recuerda al paciente completar los cuestionarios diarios y semanales. La información recopilada se muestra en un cuadro de mandos (dashboard), que presenta de manera gráfica indicadores de calidad de vida derivados de los sensores y cuestionarios. Los oncólogos pueden introducir puntos de control y rangos de alarma basados en escalas de calidad de vida y la experiencia del paciente, evaluada mediante una escala de 1 a 5. Todo el sistema está diseñado para proporcionar a los oncólogos información adicional que facilite la toma de decisiones clínicas.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

In Vitro Effect of Ferruginol, Tanshinone, and Carnosol Analogues on the Proliferation of Three Breast Cancer Cell Lines

  • González-Cardenete, Miguel A|||0000-0002-8762-0426
  • Mendoza-Hernández, William Ernesto
  • Lawson, Sydney L.
  • Rivas, Fatima
[EN] Ferruginol, tanshinones and carnosol are considered privileged natural products due to their demonstrated diverse biological activities with relevance to cancer research. Globally, cancer continues to be a major contributor to mortality rates, making these compounds potentially valuable molecular scaffolds for further development as potential anticancer agents. In this work, a focused library of ferruginol, tanshinone IIA, and carnosol analogues was studied to examine their effectiveness against various solid tumor models. The compounds were efficiently synthesized from either methyl 12-hydroxy-dehydroabietate or 12-hydroxydehydroabietylamine in 1¿3 step processes with good chemical yields. The compounds that were synthesized underwent a methodical evaluation using multiple biological tests (including viability assays, clonogenic assays, and mitochondrial membrane polarization measurements) to determine their ability to inhibit in vitro the growth of three breast cancer cell linages. It was determined that while most compounds exhibited biological activity, compounds 10 and 11 demonstrated significant efficacy against triple negative breast cancer cells. These compounds continue to show promising biological activity, suggesting that additional studies to understand their mechanisms of action would be valuable., This research was partially funded by the Louisiana Board of Regents Support Fund Award LEQSF-RD-A-05, NIGMS grant number R15 GM148983 to F.R, and the Beckman Scholars Award to S.L.L. The authors thank the Spanish Government (Project CEX2021-001230-S funded by MCIN/AEI /10.13039/501100011033 /FEDER, UE) for its financial support. This research was supported by the regional government Generalitat Valenciana, Conselleria de Educación, Universidades y Empleo , grant number CIAICO/2022/220 to M.A.G.-C.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of internal printing pattern and infill on morphological and dimensional properties of gluten-free bread manufactured by 3D printing

  • Molina-Montero, María del Carmen|||0000-0002-0797-8111
  • Matas-Gil, Adrián|||0000-0002-4106-0590
  • Igual Ramo, Marta|||0000-0001-5128-5489
  • Martínez-Monzó, Javier|||0000-0002-1123-2304
  • García-Segovia, Purificación|||0000-0002-4968-5050
[EN] The design and control of the internal structure in food 3D printing is a critical factor that determines the final properties and quality of food products. This study investigated the influence of internal structure design parameters in gluten-free bread made by 3D printing, specifically evaluating two patterns (rectilinear and concentric) and four infill percentages (30 %, 40 %, 50 %, and 60 %). The rheological properties of the dough, dimensional changes during printing and baking, colorimetric characteristics, and crumb structure were analyzed. The results showed that the dough presented a predominantly elastic behavior suitable for 3D printing. The rectilinear pattern exhibited higher dimensional stability during printing, while the concentric pattern showed higher moisture losses and, consequently lower dimensional deformations during baking., Analysis of the crumb structure revealed that the concentric pattern produced higher total porosity than the rectilinear pattern, with a more irregular pore distribution. Color differences were more pronounced in samples with 60 % infill, particularly in the rectilinear pattern. The results suggest that the selection of the pattern and percentage of infill should be based on the specific requirements of the final product., This research was funded by Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital, Generalitat Valenciana, grant number CIAICO/2023/173, and from MCIN/AEI/10.13039/501100011033/through project PID2020-115973RB-C22 and the FPIPhD contract granted by the Universitat Politecnica de Valencia subprograma 1 (PAID 01 21) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Machine learning applied to global scale species distribution models

  • Fuster-Alonso, Alba
  • Mestre-Tomás, Jorge
  • Baez, Jose Carlos
  • Pennino, Maria Grazia
  • Barber, Xavier
  • Bellido, Jose Maria
  • Conesa, David
  • Lopez-Quilez, Antonio
  • Steenbeek, Jeroen
  • Christensen, Villy
  • Coll, Marta
[EN] Species Distribution Models (SDMs) are widely used in ecology to analyze historical and future patterns of marine species distributions. Given the growing impact of climate change, predicting potential shifts in species ranges has become a key challenge. In this study, we apply Bayesian Additive Regression Trees (BART), a non-parametric machine learning algorithm, to estimate and forecast the global distribution of marine turtle species under different climate change scenarios. We model both individual species and their combined functional group, assess their historical and future habitat suitability, and examine the contribution of key environmental predictors. To evaluate BART's performance, we conduct a simulation study under two contrasting distributional scenarios: a cosmopolitan and a persistent species. We also test the sensitivity of BART to pseudo-absence data and compare its performance with MaxEnt and Generalized Additive Models (GAMs). Results indicate that BART performs slightly better overall, particularly under pseudo-absence settings, showing higher accuracy and more stable sensitivity and specificity. These findings highlight BART as a reliable alternative for long-term, global-scale species distribution modeling in marine systems., This study is a contribution to the project ProOceans (Ministerio de Ciencia e Innovacion, Proyectos de I + D + I (RETOS PID2020-118097RB-I00)). AFA received funding from the Spanish project ProOceans through an FPI grant (Ministerio de Ciencia e Innovacion, Proyectos de I + D + I (RETOSPID2020-118097RB-I00)). AFA, MC, JMT and JS acknowledge funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No. 817578 (TRIATLAS project) and No. 869300 (FutureMares). XB, DC and ALQ acknowledge support by the grant PID2022-136455NB-I00, funded by Ministerio de Ciencia, Innovacion y Universidades of Spain (MCIN/AEI/10.13039/501100011033/FEDER, UE) and the European Regional Development Fund. DC and MGP also acknowledge funding provided by the Conselleria de Educacion, Universidades y Empleo de la Generalitat Valenciana via the project CIAICO/2022/165. Authors also acknowledge institutional support of the "Severo Ochoa Center of Excellence" accreditation (CEX2024-001494-S funded by AEI 10.13039/501100011033). This project was supported by the Catalan government through the iMARES research group (2021 SGR 00435) at the Institute of Marine Sciences (ICM-CSIC) in Barcelona.This work was supported by the project SOSPEN (Spanish National Plan for Scientific and Technical Research and Innovation, 2021, PID2021-124831OA-I00).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pterin-Thymidine Adducts: From Their Photochemical Synthesis to Their Photosensitizing Properties

  • Godoy Ortega, Gricelda
  • Lorente, Carolina
  • Thomas, Andrés H.
  • Rodríguez Muñiz, Gemma María|||0000-0001-8989-2401
  • Lhiaubet, Virginie Lyria|||0000-0002-8205-8892
[EN] Pterin (Ptr) is the model compound of aromatic pterins, which are efficient photosensitizers present in human skin and are able to oxidize biomolecules upon UVA irradiation. Photosensitization involves chemical alteration of a biomolecule as a result of the initial absorption of radiation by another chemical species, the photosensitizer. Under anaerobic conditions, Ptr reacts with thymine (T) to form photoadducts (T-Ptr). In this work, we present a method to prepare and purify T-Ptr adducts, using 2 '-deoxythymidine 5 '-monophosphate (dTMP) and single stranded oligonucleotide 5 '-d(TTTTT)-3 ' (dT5), and investigate their photosensitizing properties. Interestingly, the Ptr moiety, when attached to T, retains its photophysical properties. The adduct dTMP-Ptr, upon excitation, forms singlet and triplet excited states, the latter being capable of transferring energy to dissolved O2 and generating singlet oxygen, with an efficiency similar to Ptr. In air-equilibrated solutions, both dTMP-Ptr and dT5-Ptr adducts can photosensitize the oxidation of tryptophan and 2 '-deoxyguanosine 5 '-monophosphate, two of the main targets of photosensitization in biological systems, with efficiencies close to that of free Ptr. The mechanisms involved in the oxidation of biomolecules can be either type I (electron transfer) or type II (singlet oxygen)., The present work was partially supported by Consejo Nacional de Investigaciones Cientificas y Tecnicas (CONICET, Grants P-UE 2017 22920170100100CO, Grant PIP 2021-2023 GI 11220200100877CO), Agencia de Promocion de la Investigacion, el Desarrollo Tecnologico y la Innovacion (Agencia I+D+i, Grants PICT 2019-3416), Universidad Nacional de La Plata (UNLP, Grant 11/X840). The authors thank CONICET and CSIC for supporting their collaboration through a Project of International Cooperation (Programme 2023). Also, financial support from CSIC (i-COOP, ref COOPB22038) and the Spanish (project PID2021-128348NB-I00) funded by MCIN/AEI/10.13039/501100011033/and "FEDER a way of making Europe" and regional (CIAICO/2021/061) governments is acknowledged. G.G.-O. thanks CONICET for doctoral research fellowship. Authors thank Jesuan J. Farias for the preparation of the standard of NFKyn. C.L. and A.H.T. are research members of CONICET. V.L.-V. and G.M.R.-M. are research members of CSIC.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Manifold learning for coherent design interpolation based on geometrical and topological descriptors

  • Muñoz-Pellicer, David
  • Allix, O.
  • CHINESTA SORIA, FRANCISCO JOSE
  • Ródenas, Juan José|||0000-0003-2195-7920
  • Nadal, Enrique|||0000-0002-2808-298X
[EN] In the context of intellectual property in the manufacturing industry, know-how is referred to practical knowledge on how to accomplish a specific task. This know-how is often difficult to be synthesised in a set of rules or steps as it remains in the intuition and expertise of engineers, designers, and other professionals. Today, a new research line in this concern spot-up thanks to the explosion of Artificial Intelligence and Machine Learning algorithms and its alliance with Computational Mechanics and Optimisation tools. However, a key aspect with industrial design is the scarcity of available data, making it problematic to rely on deep-learning approaches. Assuming that the existing designs live in a manifold, in this paper, we propose a synergistic use of existing Machine Learning tools to infer a reduced manifold from the existing limited set of designs and, then, to use it to interpolate between the individuals, working as a generator basis, to create new and coherent designs. For this, a key aspect is to be able to properly interpolate in the reduced manifold, which requires a proper clustering of the individuals. From our experience, due to the scarcity of data, adding topological descriptors to geometrical ones considerably improves the quality of the clustering. Thus, a distance, mixing topology and geometry is proposed. This distance is used both, for the clustering and for the interpolation. For the interpolation, relying on optimal transport appear to be mandatory. Examples of growing complexity are proposed to illustrate the goodness of the method.(c) 2022 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)., The authors gratefully acknowledge the financial support of Ministerio de Educacion, Spain (FPU16/07121),Generalitat Valenciana, Spain (Prometeo/2021/046 and CIAICO/2021/226), Ministerio de Economia, Industriay Competitividad, Spain (DPI2017-89816-R) and FEDER. O. Allix would like to thank the French National University Council and ENS Paris-Saclay for supporting his sabbatical at UPV, which made it possible to closely interact with the colleagues from I2MB-UPV. Funding for open access charge: CRUE-Universitat Politecnica de Valencia
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A latent space-based multivariate capability index: A new paradigm for raw material supplier selection in industry 4.0

  • Borràs-Ferrís, Joan
  • Duchesne, Carl
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] We present a novel Latent Space-based Multivariate Capability Index (LSb-MCpk) aligned with the Quality by Design initiative and used as a criterion for ranking and selecting suppliers for a particular raw material used in a manufacturing process. The novelty of this new index is that, contrary to other multivariate capability indexes that are defined either in the raw material space or in the Critical Quality Attributes (CQAs) space of the product manufactured, this new LSb-MCpk is defined in the latent space connecting both spaces. This endows the new index with a clear advantage over classical ones as it quantifies the capacity of each raw material supplier of providing assurance of quality with a certain confidence level for the CQAs of the manufactured product before manufacturing a single unit of the product. All we need is a rich database with historical information of several raw material properties along with the CQAs. Besides, we present a novel methodology to carry out the diagnosis for assignable causes when a supplier does not score a good capability index. The proposed LSb-MCpk is based on Partial Least Squares (PLS) regression, and it is illustrated using data from both an industrial and a simulation study., This work was partially funded by the Valencian Regional Government: Consellería de Educacion, Universidades y Empleo (CIAICO/ 2023/189), the Spanish Ministry of Economy, Industry and Competitiveness (DPI2017-82896-C2-1-R), and the European Social Fund (ACIF/ 2018/165).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The crown in the tempest: Multimodal appraisal and gendered judgment of symbolic authority on X

  • Sikorskii, Sergei|||0009-0009-1874-4394
  • Carrió-Pastor, María Luisa|||0000-0002-3040-5362
[EN] This article examines how the Spanish monarchy¿s symbolic authority was contested in digital crisis discourse during the 2024 DANA flood. Based on 500 posts on X.com, the study analyzes gendered judgments of King Felipe VI and Queen Letizia across text, images, emojis, and hashtags. Using Appraisal Theory and multimodal discourse analysis, we identify four recurrent evaluative patterns: reinforcement, complementarity, contradiction, and specialization. Findings indicate a shift from competence- to morality-based judgments, with Queen Letizia receiving intensified scrutiny through Veracity and Propriety. Intersemiotic contradiction emerges as a key strategy for challenging authenticity. We also propose the notion of legitimacy layering to capture how gender, class, and ceremonial status intersect in evaluation. The study shows how crisis discourse foregrounds moral judgment and identitybased critique, offering a framework for understanding public responses to symbolic institutions in volatile contexts., The author disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This study has been financed by the Generalitat Valenciana, Project: CIAICO/2023/187, Elaboración de una base de datos multimodal y plurilingüe para la identificación y clasificación de los mecanismos de valoración hacia mujeres y hombres en TikTok, Instagram y X (Base de datos valoración MyH REDES); Conselleria d Innovació, Universitats, Ciència i Societat Digital .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient Scaling and Squaring Method for the Matrix Exponential

  • Blanes Zamora, Sergio|||0000-0001-5819-8898
  • Kopylov, Nikita|||0000-0002-5557-0858
  • Seydaoglu, Muaz
[EN] This work presents a new algorithm to compute the matrix exponential within a given tolerance. Combined with the scaling and squaring procedure, the algorithm incorporates Taylor, partitioned, and classical Pade'\ methods shown to be superior in performance to the approximants used in state-of-the-art software. The algorithm computes matrix--matrix products and also matrix inverses, but it can be implemented to avoid the computation of inverses, making it convenient for some problems. If the matrix A belongs to a Lie algebra, then eA belongs to its associated Lie group, being a property which is preserved by diagonal Pade'\ approximants, and the algorithm has another option to use only these. Numerical experiments show the superior performance with respect to state-of-the-art implementations., This work has been funded by Ministerio de Ciencia e Innovacion (Spain) through project PID2022-136585NB-C21, MCIN/AEI/10.13039/501100011033/FEDER, UE, and also by Generalitat Valenciana (Spain) through project CIAICO/2021/180.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Temporal Trajectories in EEG-Based Mental Workload: Effects of Workspace Type

  • Pérez-Martínez, María
  • Barranco-Merino, Robi|||0009-0005-8921-4316
  • Llinares Millán, María Del Carmen|||0000-0003-2270-807X
  • Higuera-Trujillo, Juan Luis
[EN] Open-plan offices are a common format in contemporary work environments, but their exposed nature may increase cognitive demands. Work pods and other enclosed microspaces have been proposed as an alternative. However, scientific evidence demonstrating that these isolated spaces effectively reduce cognitive load remains scarce. This study examines how workspace type influences mental workload by analyzing how cognitive load evolves across two spatial configurations (open-plan office and work pod) during typical office tasks. Twenty-six participants completed auditory, reading, and writing tasks while their brain activity was recorded using EEG. The results show that each spatial typology generates distinct patterns of cortical activation: in the open-plan office, neural activity progressively increased throughout the tasks, indicating a growing effort to maintain performance, whereas in the work pod activation levels decreased, suggesting reduced cortical effort required to sustain task. These findings provide neurophysiological evidence that spatial design directly influences the mental workload associated with office work., This research was funded by Generalitat Valenciana (Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital), grant number CIAICO/2022/031. The second author is supported by the PREP2022-000026 grant, funded by MCIU/AEI/10.13039/501100011033 and the European Social Fund Plus (FSE).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimisation of a laser-driven X-ray source operating in air

  • Reija-Vecino, Alicia
  • Coathup, Andrew
  • Alejo, Aarón
  • Bembibre, Adrián
  • Contreras-Martínez, Ramiro
  • Peñas, Juan
  • Ruiz, Camilo
  • Benlliure, Jose
  • Seimetz, Michael
[EN] X-ray sources with high photon fluxes and small source sizes have been widely pursued in the last decades. With synchrotron and XFEL facilities being complex, scarce and not easily accessible, laser-driven x-ray sources have emerged as a promising option because of their compactness, high photon yield and micrometric source size. In this work, we present the optimisation of an x-ray source driven by means of 0.8 mJ, 35 fs laser pulses focused on a solid Cu target in air. A detailed characterisation of the main x-ray beam parameters is included. A Cu K alpha flux of 2.3<middle dot>10(9) photons/s has been measured in 2 pi sr. Despite the simplicity of our setup, this flux is competitive with respect to that achieved with vacuum-based sources. A clear non-isotropic distribution of the x-ray continuum has been recorded, differing from the isotropic emission reported in dedicated studies. The beam is emitted within a cone with a semiangle of approximate to 14 degrees, directed primarily along the target normal. Given the achieved flux, this source stands as a competitive alternative to more complex laser-driven x-ray sources operating in vacuum or in a He environment. (c) 2025 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement, Funding. 'la Caixa' Foundation (LCF/BQ/PI20/11760027) ; Xunta de Galicia (ED431F2023/21, CIGUS Network of Research Centres) ; Agencia Estatal de Investigacion (PID2023-152894OA-I00, RYC2021-032654I, CEX2023-001318-M) ; Generalitat Valenciana (CIAICO/2022/008) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessing the Impact of Climate Change on Muscat of Alexandria Grapevines under Rain-Fed Conditions

  • Gisbert, Carmina|||0000-0002-4620-1065
  • Peiró Barber, Rosa Mª|||0000-0002-3009-2343
  • Fos Causera, Mariano|||0000-0002-1355-0349
  • Raigón Jiménez, Mª Dolores|||0000-0001-8055-2259
  • Jaume-Beltran, Mireia
  • Soler, Jaume X.
[EN] Vine growth and reproductive performance are shaped by rootstock–scion interactions, training system, site, and management, making locally tailored combinations essential. We evaluated two clones of Muscat of Alexandria grafted onto rootstocks 41B and 140Ru under rainfed conditions in La Marina Alta (Alicante, Spain), a representative area for this cultivar, during a dry year with anomalously high temperatures. Measurements included fertility, timing of budburst and flowering, phenological development, vigor, fruit set, and berry quality. Drought and heat significantly reduced fruit set and impaired fruit development across all rootstock–scion combinations, with the magnitude of effects differing by pairing. Berry analyses confirmed clone-dependent differences in ripening timing, consistent with previous observations. These findings underscore the importance of careful rootstock–scion selection to enhance acclimation under increasingly hot and dry conditions., [ES] El crecimiento y el rendimiento reproductivo de la vid dependen de la interacción patrón–injerto, el sistema de conducción, el sitio y el manejo, por lo que es esencial ajustar las combinaciones al contexto local. Evaluamos dos clones de Moscatel de Alejandría injertados sobre 41B y 140Ru en régimen de secano en la Marina Alta (Alicante, España), una zona representativa para este cultivar, durante un año seco con temperaturas anómalamente altas. Se midieron fertilidad, fechas de desborre y floración, desarrollo fenológico, vigor, cuajado y calidad de la baya. La sequía y el calor redujeron significativamente el cuajado y afectaron el desarrollo del fruto en todas las combinaciones patrón–injerto, con magnitud variable según el emparejamiento. Los análisis de bayas confirmaron diferencias entre clones en el momento de maduración, en línea con observaciones previas. Estos resultados subrayan la necesidad de una cuidadosa selección patrón–injerto para mejorar la aclimatación en condiciones cada vez más cálidas y secas., The authors would like to thank the funding received from CIAICO/2021/118 (Conselleria de Educacion, Universidades y Empleo, Generalitat Valenciana).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Leave me be, make me strong! Growing solo to innovate together. Results from machine learning techniques on the innovation performance in resource-constrained manufacturing industries

  • Peiró Signes, Angel|||0000-0002-1549-6972
  • Segarra-Oña, Marival|||0000-0001-9674-9056
  • TRULL DOMÍNGUEZ, OSCAR|||0000-0003-2896-8606
  • Labarcés-Ballestas, Carlos
[EN] Innovation drives economic growth and competitiveness, particularly for small and medium-sized enterprises; however, firms in countries with low innovation capacity face significant barriers, ranging from limited financial resources to inadequate technological infrastructure. This paper examines the drivers of innovation in a resourceconstrained and low-innovation ecosystem by using Colombian manufacturing industry data as a reference case, as it is a context characterized by low levels of innovation activity and underdeveloped innovation ecosystems. Using data from the 2020 Survey on Development and Technological Innovation in the Manufacturing Industry, this study employs machine learning techniques to identify the key internal and external factors influencing innovation outcomes, with results indicating that firms allocating proportionally more labor and investment to scientific, technological, and innovation activities are more likely to achieve innovative outcomes. In contrast to high-innovation regions, collaboration has a less significant effect on innovation, suggesting that the lack of ecosystem support may limit knowledge sharing and resource exchange. These findings highlight the need for targeted policies focused on strengthening financial access, promoting knowledge networks, and building collaborative frameworks. The study concludes by outlining policy recommendations aimed at enhancing innovation in low-innovation contexts and suggests paths for further research on the role of ecosystem support in emerging economies., This work was supported by the Conselleria de Educacion, Cultura, Universidades y Empleo de la Generalitat Valenciana through the Research Project CIAICO 2023/228 (Study of the drivers of cooperation and co-creation for innovation and eco-innovation/Estudio de los drivers de la cooperacion y la co-creacion para la innovacion y eco-innovacion) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thorough characterization of polyoxyethylene sorbitan monopalmitate plasticized PLA/pectin composites: Insights into material properties and thermomechanical performance

  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Montanes, Nestor|||0000-0001-6070-127X
  • Dominici, Franco
  • Puglia, Debora
  • Torre, Luigi
[EN] By using dual-screw extrusion and injection molding process, different polymeric composites based on the combination of polylactic acid and pectin were successfully developed. To enhance the performance of the developed materials, plasticization was carried out by using polyoxyethylene sorbitan monopalmitate. In the composite containing 15¿wt% (weight) of pectin along with the plasticizer in 20 phr (per hundred resin), the elongation at break reached 23.6¿%, accompanied by a limited reduction in tensile strength. The incorporation of the plasticizer played a crucial role in determining the outcome of the composites, as it effectively reduced the glass transition temperature (Tg), thereby promoting improvements in ductile properties at room temperature and also increasing the crystallization ability of the samples. The polymer composites underwent testing through various techniques, including assessments of thermomechanical, chemical, color, and water uptake properties., This research is a part of the grant PID2023 152869OB-C22, and the grant TED2021 131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. The authors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. L. Quiles-Carrillo would like to thank the Ministry of Science, Innovation and Universities of Spain for the Jos¿e Castillejo grant for the international mobility of early-career researchers, with reference CAS22/ 00024. N. Montanes would like to express his gratitude to the Ministry of Science, Innovation and Universities of Spain for the grant awarded under Modality A, Stays for senior teaching and/or research staff in foreign centers, with reference PRX22/00424. J. Ivorra-Martinez thanks Generalitat Valenciana - GVA for funding a postdoc position through the CIAPOS program co-funded by ESF Investing in your future, grant number CIAPOS/2023/362.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Conditional scenario-based energy management algorithm with uncertain correlated forecasts

  • Gonzalez-Querubin, Edwin
  • Sanchís Saez, Javier|||0000-0001-9697-2696
  • Salcedo-Romero-de-Ávila, José-Vicente|||0000-0003-1577-5039
  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
[EN] This paper introduces the application of the novel approach known as Conditional Scenario-Based Model Predictive Control (CSB-MPC) into energy management in a low voltage distribution system (LVDS). The LVDS comprises renewable energy sources (RES) and an energy storage system, with correlated power generation and demand under uncertainty. This correlation is leveraged to derive a reduced set of conditional scenarios and their associated probabilities. This reduced set retains the essential characteristics of a larger set of equiprobable scenarios generated based on information about uncertainties in power generation and demand forecasts. Instead of computationally demanding methods using the larger set, a feasible Scenario-Based Mixed-Integer Linear Program (MILP) is solved by employing the reduced set. This optimisation minimises costs associated with energy consumption from the main grid and the potential waste of generated power. In the objective function, the scenarios are weighted by their probabilities to mitigate the impact of less likely forecasts, leading to efficient LVDS component utilisation and reduced operating costs. Simulation results comparing the performance of the LVDS with CSB-MPC against other MPC approaches, including classic scenario-based, chance-constrained, and deterministic methods, reveal that CSB-MPC consistently exhibits higher probabilities of operational constraint satisfaction, with differences of up to 10% or even 30%. Notably, CSB-MPC achieves these results with similar solution times to classic scenario-based MPC but with lower LVDS operating costs, between 6.62% to 11.31% less., This work was supported in part by the GVA Regional Government, Spain through project CIAICO/2021/064, in part by the MCIN/ AEI/10.13039/501100011033, Spain under Grant PID2020-120087GB-C21, and in part by the Ministry of Science, Technology and Innovation of Colombia under scholarship programme 885.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Parameter uncertainty modeling for multiobjective robust control design. Application to a temperature control system in a proton exchange membrane fuel cell

  • Veyna-Robles, Uriel
  • Blasco, Xavier|||0000-0002-9737-2833
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Pajares-Ferrando, Alberto|||0000-0002-2036-2709
[EN] Advanced control systems are tuned using dynamic models and optimization techniques. This approach frequently involves satisfying multiple conflicting objectives. Tuning robust controllers requires considering a framework that represents the system uncertainties, and its definition is not a trivial task. When dealing with a nonlinear model with many parameters, a high-quality representation requires a massive sampling of variations. In many cases, this represents an inaccessible computational cost for the optimization process. This work presents a new methodology for parameter uncertainty modeling that is oriented to tuning robust controllers based on multiobjective optimization techniques. The uncertainty modeling formulated represents a feasible computational cost and leads to robust solutions without attributing excessive conservatism. The novelty of this process consists in using the multiobjective space to define a set of scenarios with highly representative properties of the global uncertainty framework that formulate the control problem under a predefined minimization strategy. To demonstrate the effectiveness of this methodology, we present a temperature control design in a micro-CHP system under worst-case minimization. Based on the results, particular interest is given to verifying the appropriate formulation of the uncertainty modeling, which represents a 92.8% reduction of the computational cost involved in solving the robust optimization problem under a global uncertainty framework., This work was supported in part by grant PID2021-124908NB-I00 founded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe"; by grant SP20200109 (PAID-10-20) funded by Universitat Politecnica de Valencia; and by grant PRE2019-087579 funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future"; and by the Generalitat Valenciana regional government through project CIAICO/2021/064. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nondestructive approach to evaluate strain changes in prestressed concrete by saw-cutting

  • Mateu-Sánchez, Juan Antonio|||0000-0001-6351-5886
  • Navarro-Gregori, Juan|||0000-0002-6319-7029
  • Martí Vargas, José Rocío|||0000-0003-1665-2348
[EN] Prestressed concrete members are designed to generate concrete pre-compressive states through the prestressing force. After casting, prestress losses reduce the prestressing force, whose evaluation requires indirect determinations for existing unmonitored members. Pioneer determinations have been made by applying non-destructive methods such as saw-cutting, with limitations related to the use of electric-resistance strain gauges. As an alternative measurement approach, this paper presents a new specific methodology for evaluating concrete strain changes based solely on the use of mechanical strain gauges. The feasibility of the methodology is experimentally assessed through redundant determinations to characterise the behaviour of the Isolated Concrete Block (ICB) generated by saw-cutting a post-tensioned concrete beam. The approach offers a consistent derivation of concrete strain changes and a clear identification of the decompression state. For the selected key parameters of 120 mm distance between the pair of cuts and progressive discretised cut depths until 50 mm, the ICB presented a clear evolutive behaviour and showed full prestress release between 30 and 35 mm cut depth. The robustness of the experimental results obtained from different measurement base lengths demonstrates the viability of the conceived methodology for future applications as a basis for assessing the residual prestressing force., This work forms part of the competitive research projects PID2020-118495RB-I00/AEI/10.13039/501100011033 and PID2023-149364OB-I00/AEI/10.13039/501100011033 and the human resources funding PRE2021-098777/AEI/10.13039/501100011033), all of them funded by the Agencia Estatal de Investigacion (State Research Agency) of Spain, and the competitive research project CIAICO/2022/045 funded by the Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Feasibility and Preliminary Psychological Outcomes of emoTIChealth, a Serious Game-Based Intervention for Adolescents with Food Allergy: A Pilot Study

  • Pérez Marín, María Antonia
  • Martín-Ávila, Javier
  • Rodriguez-Jimenez, Esther
  • Montoya-Castilla, Inmaculada
  • Valero-Moreno, Selene
  • Gil-Gómez, José-Antonio|||0000-0001-9954-2480
[EN] Food allergy (FA) is a chronic condition that can affect adolescents¿ emotional well-being, daily functioning, and psychosocial adjustment. Digital interventions based on serious games may support the development of socioemotional competencies in this population, although evidence remains limited. This study explored the psychological outcomes derived from emoTIChealth, a serious game designed to promote psychological adjustment and emotional competencies in adolescents with FA. A quasi-experimental longitudinal design with repeated measures and no parallel control group was conducted in 23 adolescents aged 11¿17 years diagnosed with FA. Participants completed assessments at two pre-intervention time points and one post-intervention assessment. Outcomes included health-related quality of life, emotional competencies, socioemotional skills, self-concept, healthy habits, psychopathological symptoms, and perceived disease threat. A significant decrease in emotional awareness-related dimensions was observed, particularly in attention to others¿ emotions and global emotional awareness. A significant decrease in Global Difficulties and the presence of psychopathology post-intervention was also observed. The participants¿ emotional state and perceived difficulties during the intervention were associated with changes in some psychological outcomes. These findings provide preliminary evidence that emoTIChealth may influence specific emotional processes in adolescents with FA, although its impact on broader psychosocial and health-related outcomes appears limited. Further controlled studies with larger samples are warranted., This project was funded by the Directorate General of Science and Research of the Generalitat Valenciana, Spain, through its grant program for consolidated research groups (CIAICO/2023/014)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thermal and Acoustic Characterization of Recycled Ground Tyre Rubber and Aggregate Seismic Isolator

  • Ruiz-Miguel, Álvaro|||0000-0002-3536-2357
  • Pallarés Rubio, Francisco Javier|||0000-0003-4298-2287
  • Alba, Jesus|||0000-0002-4188-854X
  • Aguero Ramón Llin, Antonio|||0000-0002-7046-3014
  • Pallarés Rubio, Luis|||0000-0003-2126-2387
[EN] Currently, large amounts of aggregate waste from the construction industry and ground tire rubber from the automotive sector are being generated. Enhancing and expanding recycling options for these materials is essential to support the transition toward a circular economy in both industries. This study proposes the use of recycled materials in the development of a seismic isolator designed for building partitions. As such, the new element must meet the performance requirements applicable to all materials used in building enclosures. Polyurethane is employed as a binder for the recycled components. The composite material is produced by combining polyurethane with varying proportions of recycled ground tire rubber and aggregates, expressed as a percentage of the polyurethane mass. The polyurethane is directly mixed with the recycled constituents. The resulting samples are subjected to thermal and acoustic testing to evaluate their suitability for partitions and enclosures in building construction in accordance with regulations. The results of the three tests indicate improvements in the measured properties, with the magnitude of enhancement depending on the ratio of ground tire rubber to aggregate. Overall, the developed composite materials exhibit characteristics and behavior compatible with the intended application., This work was made possible thanks to the following projects: 1. INNVA1/2023/97, titled Validation under Real Operating Conditions and Reduction in Uncertainties in the Design of a Seismic Isolation System for Partition Walls Made of Plasterboard Panels, within the framework of the European Regional Development Fund (ERDF) Programme of the Comunitat Valenciana 2021 2027. Funded by the Valencian Institute for Competitiveness and Innovation (IVACE+i). 2. INVEST/2022/426, titled Construcción circular, energéticamente eficiente y resiliente frente a sismo (CCEERS) , funded by Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital, Generalitat Valenciana, and co-funded by European Union through Mecanismo de Recuperación y Resiliencia (MRR) in the frame Plan de Recuperación, Transformación y Resiliencia. 3. Also funded by Conselleria de Educació, Cultura, Universitats i Ocupació, Direcció General de Ciència i Investigació, Direcció General de Ciència i Investigació, consolidated groups of research AICO 2024 (CIAICO 2023), grant number CIAICO/2023/246.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis de maestría (MasterThesis)

Redes neuronales informadas por la física para la estimación de propiedades materiales en problemas hiperelásticos, Physics-Informed Neural Networks for Estimating Material Properties in Hyperelastic Problems, Xarxes neuronals informades per la física per a l’estimació de propietats materials en problemes hiperelàstics

  • Rodrigo Barrio, Patricia
[ES] Este Trabajo Fin de Máster tiene como objetivo estudiar la aplicación de redes neuronales informadas por la física (Physics-Informed Neural Networks, PINNs) la estimación de propiedades materiales en problemas mecánicos hiperelásticos, utilizando como referencia el método de los elementos finitos (FEM). En particular, se plantea el estudio de un sólido tridimensional sometido a grandes deformaciones, con comportamiento constitutivo de tipo Mooney Rivlin y condiciones de contorno mixtas de Dirichlet y Neumann. El trabajo se estructurará en una primera fase centrada en el problema directo. Para ello, se resolverá el problema mediante FEM con el fin de disponer de una solución de referencia del campo de desplazamientos y, posteriormente, se desarrollará y entrenará una PINN capaz de aproximar dicha solución incorporando en la función de pérdida las ecuaciones físicas del problema y las condiciones de contorno impuestas. Asimismo, se analizará la influencia de distintos aspectos del entrenamiento, como la arquitectura de la red, la función de activación, el optimizador y la ponderación de los distintos términos de la función de pérdida. Finalmente, se extenderá la metodología al problema inverso de identificación de parámetros materiales, así como su aplicación a geometrías de mayor interés biomecánico. Con ello, se pretende evaluar el potencial de las PINNs como herramienta alternativa o complementaria a los métodos numéricos clásicos en el contexto de la hiperelasticidad.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biobased plasticizers derived from fumaric acid for ductility improvement in injection-molded polylactide

  • Vicente-Vinas, Maria del Puig|||0009-0005-0024-1503
  • Silvestre Botella, Jordi
  • Montanes, Nestor|||0000-0001-6070-127X
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
[EN] The intrinsic brittleness of poly(lactide) (PLA) remains a major limitation for applications requiring a suitable balance between stiffness and toughness. In this work, four bio-based fumaric acid esters with different alkyl-chain lengths and architectures, namely diethyl fumarate (DEF), diisopropyl fumarate (DPF), dibutyl fumarate (DBF), and bis(2-ethylhexyl) fumarate (DEHF), were evaluated as plasticizers for PLA. Formulations containing 10 and 20 wt% of each fumarate were prepared by melt extrusion followed by injection molding and characterized in terms of their mechanical, morphological, chemical, thermal, viscoelastic, thermomechanical, and migration behavior. At 10 wt%, none of the fumarates induced a brittle-to-ductile transition, and the formulations largely retained the rigid and brittle mechanical response of neat PLA. In contrast, the incorporation of 20 wt% of DEF, DPF, and DBF produced pronounced plasticization, with substantial reductions in stiffness and glass transition temperature and an increase in elongation at break from 6.7% for neat PLA to 212.9¿326.0%. Conversely, PLA formulations plasticized with DEHF exhibited a markedly different behavior. Even at 20 wt%, DEHF retained comparatively high stiffness, showed a smaller reduction in glass transition temperature, and maintained good dimensional stability, while improving Charpy impact strength from 4.8 to 8.5 kJ m¿2. Overall, the results demonstrate that the plasticization efficiency and retention of fumaric acid esters are strongly governed by their molecular architecture. Short- and medium-chain fumarates provide highly ductile PLA formulations, whereas the bulky and branched structure of DEHF promotes enhanced toughness while preserving comparatively high rigidity., This research is a part of the grant PID2023-152869OB-C22, funded by MCIN/AEI/10.13039/501100011033 (Spain) and by the European Union "NextGenerationEU"/PRTR and by ERDF A way of making Europe. The authors also thank Generalitat Valenciana-GVA (Spain) , grant numbers CIGE/2023/46 and CIAICO/2023/253, for supporting this work. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Unlocking the Role of C Doping in a RuO2 Matrix in CO2 Methanation from a Combined Theoretical and Experimental Approach

  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Gómez-Acosta, Daviel|||0000-0003-0010-4507
  • Tebar-Soler, Carmen|||0000-0001-7054-4503
  • Royo de Larios, Alvaro
[EN] A new type of ruthenium-based catalyst, labeled RuO x C y @C, consisting of a combination of metallic ruthenium (Ru0), ruthenium oxide (RuO2), and a ruthenium oxycarbonate phase (RuO2C y ) formed by interstitial carbon doped into RuO2, has been recently reported for low-temperature CO2 methanation. Its catalytic activity and long-term stability depend on two competing processes that take place under reaction conditions: RuO2 reduction with H2 to form inactive Ru0 nanoparticles, and C diffusion into RuO2 to form the active oxycarbonate phase. A combination of experimental and computational techniques is applied in this work to investigate the relative rate of both processes in order to identify possible modifications in the catalyst composition that might improve the overall catalytic performance., This work has been supported by the Spanish Government through TED2021-130739B-I00, funded by MCIN/AEI/10.13039/501100011033/EU/PRTR, and by Generalitat Valenciana (GVA) through the Prometeo Program (CIPROM/2023/34). Ministerio de Ciencia, Innovacion y Universidades, grant number PID2021-1262350B-C31, and Generalitat Valenciana (GVA), grant number CIAICO/2021/2138. This study forms part of the Advanced Materials program and was supported by MCIN with funding from the European Union Next Generation EU (PRTR-C17.11) and Generalitat Valenciana (ref MFA/2022/016 and TED2021-130756B-C32). The authors are also thankful for the Severo Ochoa financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S/funding by MCIN/AEI/10.13039/501100011033). D.G. thanks the Marie-Curie Postdoctoral (MSCA) Fellowship ID 101154019. A.R.D.L. thanks the Predoctoral Fellowship MMT24-ITQ-01-01 (NextGenerationEU). We thank Red Espanola de Supercomputacion (RES) for computational resources.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Explainability Across the Spectrum: Modeling Stakeholder Goals Based on AI Complexity Levels

  • Antoni Mestre
  • Albert Albiol, Manuela|||0000-0003-3747-400X
  • Pelechano Ferragud, Vicente|||0000-0003-1090-230X
  • Gil, Miriam
[EN] Explainability is a critical enabler of trust, usability, and regulatory compliance in artificial intelligence (AI) systems. In Hybrid Intelligence (HI) systems, where human expertise and AI collaborate to make decisions, the need for explainability becomes even more pronounced. However, the complexity of explainability requirements varies significantly depending on the role AI plays within the system. From human-dominant systems, where AI provides supportive insights, to AI-dominant systems, where AI assumes autonomous decision-making, the nature and depth of explanations required shift across this spectrum. Despite its importance, there is a lack of systematic approaches for tailoring explainability to meet stakeholder needs across these varying levels of AI complexity. This paper identifies the key components that shape explainability in HI systems, addressing the distinct roles and interactions of human and AI agents, as well as the diverse needs of stakeholders. In addition, the paper introduces a conceptual framework to assist designers in integrating explain-ability as a Non-Functional Requirement into HI systems. The framework leverages Goal-Oriented Requirements Engineering to facilitate the incorporation of suitable explainability NFRs into the design of HI systems, enabling designers to address challenges such as enhancing transparency, fostering trust, and meeting diverse stakeholder expectations. This research provides a first approach for advancing the design of adaptable, accountable, and trustworthy HI systems, contributing valuable insights to the fields of requirements engineering, human-AI collaboration, and regulatory compliance., This work has been developed with the financial support of the of the Generalitat Valenciana with TENTACLE (CIAICO/2023/089) and by the MINECO under project PRODIGIOUS PID2023-146224OB-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Recognition of Human Actions through Speech or Voice Using Machine Learning Techniques

  • Peña-Cáceres, Oscar
  • Silva-Marchan, Henry
  • Gil, Miriam
  • Albert Albiol, Manuela|||0000-0003-3747-400X
[EN] The development of artificial intelligence (AI) and smart home technologies has driven the need for speech recognition-based solutions. This demand stems from the quest for more intuitive and natural interaction between users and smart devices in their homes. Speech recognition allows users to control devices and perform everyday actions through spoken commands, eliminating the need for physical interfaces or touch screens and enabling specific tasks such as turning on or off the light, heating, or lowering the blinds. The purpose of this study is to develop a speech-based classification model for recognizing human actions in the smart home. It seeks to demonstrate the effectiveness and feasibility of using machine learning techniques in predicting categories, subcategories, and actions from sentences. A dataset labeled with relevant information about categories, subcategories, and actions related to human actions in the smart home is used. The methodology uses machine learning techniques implemented in Python, extracting features using CountVectorizer to convert sentences into numerical representations. The results show that the classification model is able to accurately predict categories, subcategories, and actions based on sentences, with 82.99% accuracy for category, 76.19% accuracy for subcategory, and 90.28% accuracy for action. The study concludes that using machine learning techniques is effective for recognizing and classifying human actions in the smart home, supporting its feasibility in various scenarios and opening new possibilities for advanced natural language processing systems in the field of AI and smart homes., This work was supported by Generalitat Valenciana with HAAS (CIAICO/2021/03 9) and the Spanish Ministry of Science and Innovation under the Project AVANTIA PID2020-114480RB-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Revisited Concept of Three-Phase Transformers Short-Circuit Resistances in Light of the Institute of Electric and Electronics Engineers (IEEE) Standard C57.110-2018

  • León-Martínez, Vicente|||0000-0002-1906-371X
  • Peñalvo-López, Elisa|||0000-0002-3143-822X
  • Saiz, Juan Ángel
  • Leon-Vinet, Amparo|||0000-0003-3773-8116
[EN] Short-circuit resistances are transformer parameters that characterize the electrical load losses and correct operation of these machines. However, the traditional concept of short-circuit resistance, independent of the harmonic frequencies, has been superseded by present transformer standards. Hence, new expressions for short-circuit resistances of three-phase transformers have been developed in this article based on the IEEE Standard C57.110-2018 and are presented jointly with the losses that these resistances characterize. These refer to the secondary effective short-circuit resistance of each phase (¿¿¿,¿ ), of each harmonic (¿¿¿,¿ ), and the non-fundamental frequency combined harmonics (¿¿¿,¿¿ ). Likewise, the harmonic loss factor (¿¿¿¿% ) has been established to determine the importance of the harmonics in each phase¿s load losses. The application of these short-circuit resistances to the calculation of the load losses for a 630 kVA transformer from an actual residential distribution network has shown that the same values are obtained as with the IEEE Standard C57.110-2018, and they are 48.75% higher than those recorded with the traditional short-circuit resistances when the current distortion rates are 36.47%., This research and APC was funded by the Generalitat Valenciana within the ValREM Project (CIAICO/2022/007).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of non-uniform grid-forming control techniques for the HVDC connection of renewable energy

  • Beneit-Barajas, Adrián
  • Martínez-Turégano, Jaime|||0000-0002-3483-8253
  • Penadés-Huesca, Patricia
[EN] Grid-forming control techniques are required to achieve a high penetration of power electronics- based renewable energy sources for decarbonized electric systems. However, different grid- forming control strategies can operate in the same grid, and grid stability shall be warranted. This paper analyses the use of different grid-forming control strategies for diode rectifier-based wind power plants. The analysed grid-forming controllers are the well-known droop control, an advanced droop control, and the virtual synchronous machine control. The controllers' analysis validates the three grid-forming controllers' interoperability, identifying each control parameter's contribution to the stability of each system state variable. Furthermore, the analysis allows a better tuning of the control parameters. Additionally, a fault-ride-through strategy that improves the system restoration after faults is proposed and validated. The proposed fault-ride-through strategy achieves a soft restoration of the active power., Authors would like to acknowledge the support of the Spanish Research Agency through grant PID2020-112943RB-I00 funded by MCIN/AEI/10.13039/501100011033, grant PDC2021-121077-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR, grant PRE2021-100779 funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future", the support of Generalitat Valenciana through grant CIAICO/2021/340, and grant INVEST/2022/439 funded by Generalitat Valenciana and the European Union Next GenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Innovative Famciclovir Eye Drop Formulations for Herpes Zoster Infections

  • Domenech-Monsell, Iris M.
  • Alambiaga-Caravaca, Adrián M.
  • Bernat-Just, Lucía
  • Merino Sanjuán, Virginia
  • Rodilla, Vicent
  • Balaguer-Fernández, Cristina
  • López-Castellano, Alicia
[EN] Purpose: Herpes zoster ophthalmicus, a manifestation of the varicella-zoster virus in the eye, presents significant clinical challenges. As there is no direct ocular treatment for this infection, new therapeutic options should be studied. Famciclovir, a widely used antiviral drug for herpes zoster, offers higher bioavailability than acyclovir (a common herpes zoster treatment). However, this drug is currently limited to oral dosage forms, which are associated with inherent limitations such as variable absorption or gastrointestinal side effects. This study aimed to formulate new famciclovir eye drops for controlled drug release and targeted delivery to the cornea and sclera.Method: Eye drop formulations containing various polymers (polyvinyl alcohol, hydroxypropyl methyl cellulose and chitosan) were developed and evaluated for physicochemical properties, irritation index and stability. The best performing formulation was used in ex-vivo diffusion and retention studies with rabbit cornea and sclera. The results were analyzed with a new HPLC validation method.Results:The formulation with polyvinyl alcohol exhibited superior properties regarding transparency, turbidity and absence of bubbles. It maintained a physiological pH over time and had an appropriate viscosity of 19.97 +/- 0.25 mPa.s. Non-irritancy was confirmed by the HET-CAM test, and the formulation was stable at room temperature (25 degrees C), fridge (4 degrees C) and freezer (-80 degrees C). Ex- vivo diffusion studies revealed higher diffusion through the sclera compared to the cornea, with greater drug accumulation in sclera.Conclusions: These findings suggest that famciclovir eye drops may offer a viable treatment for ocular herpes zoster infections. Famciclovir also diffuses and retains in targeted membranes, possibly enhancing its therapeutic effects., This research was supported by Generalitat Valenciana [CIAICO/2022/198], and predoctoral grants CEU Cardenal Herrera FPI CEU-UCH.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

State Shaping Model Predictive Control for Harmonic Compensation

  • Cateriano Yáñez, Carlos
[ES] Esta tesis está dedicada al desarrollo de conceptos de control predictivo basados en modelos para la compensación de armónicos en sistemas de potencia con fuentes de energía renovables. En concreto, estos conceptos proporcionan una corriente de compensación de referencia para un filtro activo de potencia conectado en el punto de acoplamiento común, mejorando así la calidad de potencia del sistema. No obstante, los resultados podrían aplicarse en general a problemas de control en los que el objetivo sea seguir la forma de una determinada señal. La tesis propone dos métodos principales de control basados en la teoría de control predictivo de modelos (MPC). El primer controlador, es decir, el control predictivo de modelos con conformación de señal de estado lineal (LS3MPC), se basa en la teoría MPC cuadrática estándar. Sin embargo, contrariamente a la práctica habitual de control de referencia fija, el LS3MPC incorpora la dinámica deseada del sistema directamente en su función de coste, utilizando los denominados residuos de clase de forma lineal. Este enfoque permite que la función de costes del LS3MPC sea más adaptable y ofrezca más compensaciones dinámicas, especialmente cuando está sometida a restricciones. Al utilizar los residuos de clase de forma, el problema MPC garantiza que la planta controlada siga la dinámica dada por la clase de forma. En este caso, la dinámica deseada está determinada por la clase de forma armónica lineal propuesta, es decir, la dinámica de una señal armónica fundamental de frecuencia fija. Desde el punto de vista de la implementación, se propone una formulación MPC explícita para el LS3MPC con el fin de mejorar su aplicabilidad en tiempo real. El LS3MPC explícito propuesto utiliza un enfoque de malla equidistante en formato tensorial para aproximar la solución MPC explícita con afinidad por partes. Usando la descomposición tensorial, el LS3MPC explícito puede romper la maldición de la dimensionalidad, reduciendo significativamente la carga de memoria y trivializando el problema en tiempo real de localización de puntos. El segundo controlador, es decir, el control predictivo de modelo de ciclo límite (LCMPC), se centra en resolver las deficiencias del LS3MPC. En concreto, el LCMPC aborda la falta de control directo de la amplitud recurriendo a la teoría MPC no lineal. El LCMPC introduce una clase de forma armónica no lineal basada en una forma normal de bifurcación supercrítica de Neimark-Sacker. Al igual que el LS3MPC, el LCMPC también incorpora el residual de su clase de forma armónica no lineal directamente en su función de coste, proporcionando las mismas ventajas mencionadas anteriormente. En cuanto a la estabilidad del sistema, se desarrollan condiciones suficientes, para un estado inicial predeterminado, que garanticen que el sistema de bucle cerrado permanece dentro de la región de atracción de la forma normal ante una perturbación suficientemente pequeña. Ambos controladores se someten a pruebas con estudios de simulación en múltiples escenarios, proporcionando resultados de compensación consistentemente satisfactorios., [CA] Aquesta tesi està dedicada al desenvolupament de conceptes de control predictiu basats en models per a la compensació d'harmònics en sistemes de potència amb fonts d'energia renovables. En concret, aquests conceptes proporcionen un corrent de compensació de referència per a un filtre actiu de potència connectat en el punt d'acoblament comú, millorant així la qualitat de potència del sistema. No obstant això, els resultats podrien aplicar-se en general a problemes de control en els quals l'objectiu siga seguir la forma d'un determinat senyal. La tesi proposa dos mètodes principals de control basats en la teoria de control predictiu de models (MPC). El primer controlador, és a dir, el control predictiu de models amb conformació de senyal d'estat lineal (LS3MPC), es basa en la teoria MPC quadràtica estàndard. No obstant això, contràriament a la pràctica habitual de control de referència fixa, el LS3MPC incorpora la dinàmica desitjada del sistema directament en la seua funció de cost, utilitzant els denominats residus de classe de manera lineal. Aquest enfocament permet que la funció de costos del LS3MPC siga més adaptable i oferisca més compensacions dinàmiques, especialment quan està sotmesa a restriccions. En utilitzar els residus de classe de forma, el problema MPC garanteix que la planta controlada seguisca la dinàmica donada per la classe de forma. En aquest cas, la dinàmica desitjada està determinada per la classe de manera harmònica lineal proposta, és a dir, la dinàmica d'un senyal harmònic fonamental de freqüència fixa. Des del punt de vista de la implementació, es proposa una formulació MPC explícita per al LS3MPC amb la finalitat de millorar la seua aplicabilitat en temps real. El LS3MPC explícit proposat utilitza un enfocament de malla equidistant en format tensorial per a aproximar la solució MPC explícita amb afinitat per parts. Usant la descomposició tensorial, el LS3MPC explícit pot trencar la maledicció de la dimensionalitat, reduint significativament la càrrega de memòria i trivialitzant el problema en temps real de localització de punts. El segon controlador, és a dir, el control predictiu de model de cicle límit (LCMPC), se centra en resoldre les deficiències del LS3MPC. En concret, el LCMPC aborda la falta de control directe de l'amplitud recorrent a la teoria MPC no lineal. El LCMPC introdueix una classe de manera harmònica no lineal basada en una forma normal de bifurcació supercrítica de Neimark-Sacker. Igual que el LS3MPC, el LCMPC també incorpora el residual de la seua classe de manera harmònica no lineal directament en la seua funció de cost, proporcionant els mateixos avantatges esmentats anteriorment. Quant a l'estabilitat del sistema, es desenvolupen condicions suficients, per a un estat inicial predeterminat, que garantisquen que el sistema de bucle tancat roman dins de la regió d'atracció de la forma normal davant una pertorbació prou xicoteta. Tots dos controladors se sotmeten a proves amb estudis de simulació en múltiples escenaris, proporcionant resultats de compensació consistentment satisfactoris., [EN] This thesis is dedicated to developing model-based predictive control concepts for harmonic compensation in power systems with renewable energy sources. Specifically, these concepts provide a reference compensation current for an active power filter connected at the point of common coupling, thereby enhancing the system's power quality. Nevertheless, results could be generically applied to control problems where the task is to follow a certain shape of a signal. The thesis proposes two main control approaches based on model predicitve control (MPC) theory. The first controller, i.e., the linear state signal shaping model predictive control (LS3MPC), relies on standard quadratic MPC theory. However, contrary to standard fixed reference control practice, the LS3MPC embeds the desired system dynamics directly into its cost function, using the so-called linear shape class residuals. This approach allows the LS3MPC' cost function to be more adaptive, providing more dynamic trade-offs, especially when constrained. By using shape class residuals, the MPC problem ensures that the controlled plant follows the desired dynamics given by the shape class. In this case, the target dynamics are given by the proposed linear harmonic shape class, i.e, the dynamics of a fundamental harmonic signal of fixed frequency. From an application perspective, an explicit MPC formulation for the LS3MPC is proposed to enhance its real-time applicability. The proposed explicit LS3MPC uses an equidistant mesh grid approach in tensor format to approximate the piecewise affine explicit MPC solution. Using tensor decomposition, the explicitLS3MPC can break the curse of dimensionality, significantly reducing memory burden and trivializing the online point localization problem. The second controller, i.e., the limit cycle model predictive control (LCMPC), focuses on addressing the shortcomings of the LS3MPC. Namely, the LCMPC addresses the lack of direct amplitude control by reaching into nonlinear MPC theory. The LCMPC introduces a nonlinear harmonic shape class based on a supercritical Neimark-Sacker bifurcation normal form. Similarly to theLS3MPC, the LCMPC also embeds its nonlinear harmonic shape class residual directly in its cost function, providing the same benefits mentioned before. Regarding system stability, sufficient conditions are developed for a given initial state to ensure that the closed-loop system remains inside the normal form region of attraction for a sufficiently small disturbance. Both controllers are tested with simulation studies in multiple scenarios, providing consistently satisfactory compensation results., The contributions on this doctoral thesis were partly developed at the Fraunhofer Institute for Silicon Technology ISIT within the project North German Energy Transition 4.0 (ger- man: Norddeutsche EnergieWende, NEW 4.0), which is funded by the German Federal Ministry for Economic Affairs and Energy (german: Bundesministerium für Wirtschaft und Energie, BMWi. This work was also partly funded with the project Northern German Living Lab (german: Norddeutsches Reallabor, NRL) by the Federal Ministry for Economic Affairs and Climate Action, by Generalitat Valenciana regional government through project CIAICO/2021/064, and by the Free and Hanseatic City of Hamburg (Hamburg City Parliament publication 20/11568).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Environmental monitoring of a climate change indicator (Vibrio vulnificus) in coastal wetland water samples based on field-deployable detection

  • Quintero-Campos, Pedro|||0000-0002-9398-5077
  • Tortajada-Genaro, Luis Antonio|||0000-0003-4021-5607
  • Maquieira, Angel|||0000-0003-4641-4957
  • Salvador-Clavell, Rubén
  • Martín-Urdiales, Blanca
  • Fouz, Belén
  • Amaro, Carmen
[EN] Global warming is driving rapid changes across all ecological scales, including shifts in the distribution patterns and virulence potential of some pathogenic bacteria. A relevant pathogen affected by climate change is Vibrio vulnificus, a species considered a valuable biomarker because rising temperatures and changes in salinity strongly influence its prevalence and distribution. Comprehensive surveillance at local scales is required to provide precise environmental understanding. However, current monitoring methods are often inaccessible or cost-prohibitive, highlighting the need for fast, field-deployable alternatives. This study hypothesized that combining lateral flow assay with isothermal DNA amplification can enable rapid, on-site detection with minimal instrumentation. To validate the approach, V. vulnificus was monitored in a Mediterranean coastal wetland, a sensitive ecosystem where changes impact biodiversity and may lead to waterborne diseases. The campaign was based on water sampling, an enrichment step, and a DNA-based assay integrated into a microfluidic chip. Species-specific vvhA gene was amplified through recombinase polymerase amplification (RPA), detected on a lateral flow strip, and quantified by a smartphone. The monitoring campaign identified locations within the wetland exhibiting a significant increase in bacterial concentrations, up to 300 times, depending on the sampling site. The bacterium was detected in brackish water areas and inflow/outflow points, showing excellent performance. These promising results suggest that the new procedure can help detect microenvironments that favor or inhibit bacterial growth. The surveillance strategy could be effectively applied on a global scale to assess risks, examine variations associated with climate change, and implement measures against Vibrio infections., This study forms part of the ThinkInAzul programme and was supported by MICIU with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana projects GVATHINKINAZUL/2021/010-UPV [PI: A. Maquieira, L.A. Tortajada, UPV] and GVA-THINKINAZUL/2021/027 [PI: C. Amaro, B. Fouz, UV]. Financial support was also received from projects PID2022-140653OBI00 funded by MCIN/AEI and CIAICO/2021/293 funded by Conselleria de Innovacion, ¿ Universidades, Ciencia y Sociedad Digital (GVA). Additional support was obtained through the INVESTIGO Program funded by the European Union NextGenerationEU and GVA
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessment of Load Losses Caused by Harmonic Currents in Distribution Transformers Using the Transformer Loss Calculator Software

  • León-Martínez, Vicente|||0000-0002-1906-371X
  • Peñalvo-López, Elisa|||0000-0002-3143-822X
  • Montañana-Romeu, Joaquín|||0000-0003-3331-9205
  • Andrada-Monrós, Clara|||0000-0001-6344-6649
  • Molina-Cañamero, Laura
[EN] Transformer load losses cause various adverse effects, such as derating, a decreased lifetime, and greenhouse gas emissions. In this paper, the load losses caused by non-linear loads on distribution transformers are analyzed. For this study, the load loss expressions provided by the IEEE Standard C57.110 and ANSI/UL 1561-1562 were adapted to the usual case where the transformer currents differ in each phase. The novel load loss expressions adapted from the IEEE Standard C57.110 were applied using the software known as the ¿Transformer Loss Calculator¿ (TLC), implemented with LabVIEW. For the application of new load loss expressions, carbon dioxide (CO2) emissions were determined by multiplying the load losses by the emission factors of each country. The experimental results are based on the recordings made by a FLUKE 435 Series II analyzer on the second of two 1000 kVA transformers, feeding real residential distribution networks with very differently distorted loads. An analysis of these transformers shows that the annual energy losses and CO2 emissions obtained from the adapted load loss expressions could be more than 5% of those determined by the original IEEE and ANSI Standard expressions. Due to these percentage loss and emission differences, it is advisable to use the TLC software in transformer monitoring instruments, This research and APC was funded by GENERA Project (grant number 101077073) under the LIFE Programme of the EUROPEAN COMMISSION, and the Generalitat Valenciana within the ValREM Project (CIAICO/2022/007).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photolytic splitting of homodimeric quinone-derived oxetanes studied by ultrafast transient absorption spectroscopy and quantum chemistry

  • Blasco-Brusola, Alejandro
  • Tamarit-Mayo, Lorena
  • Vayá Pérez, Ignacio|||0000-0003-1682-9342
  • Navarrete-Miguel, Miriam
  • Roca-Sanjuán, Daniel
  • Miranda, Miguel A.
[EN] The photoinduced cycloreversion of oxetane derivatives is of considerable biological interest since these compounds are involved in the photochemical formation and repair of the highly mutagenic pyrimidine (6-4) pyrimidone DNA photoproducts ((6-4)PPs). Previous reports have dealt with the photoreactivity of heterodimeric oxetanes composed mainly of benzophenone (BP) and thymine (Thy) or uracil (Ura) derivatives. However, these models are far from the non-isolable Thy <degrees > Thy dimers, which are the real precursors of (6-4)PPs. Thus, we have synthesized two chemically stable homodimeric oxetanes through the Patern & ograve;-B & uuml;chi reaction between two identical enone units, i.e. 1,4-benzoquinone (BQ) and 1,4-naphthoquinone (NQ), that led to formation of BQ-Ox and NQ-Ox, respectively. Their photoreactivity has been studied by means of steady-state photolysis and transient absorption spectroscopy from the femtosecond to the microsecond time scale. Thus, photolysis of BQ-Ox and NQ-Ox led to formation of the monomeric BQ or NQ, respectively, through ring opening in a "non-adiabatic" process. Accordingly, the transient absorption spectra of the triplet excited quinones (3BQ* and 3NQ*) were not observed as a result of direct photolysis of the quinone-derived oxetanes. In the case of NQ-Ox, a minor signal corresponding to 3NQ* was detected; its formation was ascribed to minor photodegradation of the oxetane during acquisitions of the spectra during the laser experiments. These results are supported by computational analyses based on density functional theory and multiconfigurational quantum chemistry (CASSCF/CASPT2); here, an accessible conical intersection between the ground and excited singlet states has been characterized as the main structure leading to deactivation of excited BQ-Ox or NQ-Ox. This behavior contrasts with those previously observed for heterodimeric thymine-derived oxetanes, where a certain degree of ring opening into the excited triplet state is observed.; The photocleavage of homodimeric quinone oxetanes evolves through a non-adiabatic process, the opposite of what has been observed with heterodimeric oxetanes. This is explained by ultrafast transient absorption spectroscopy and quantum chemistry., Grants PID2020-115010RB-I00 and PID2021-127199NB-I00 funded by MCIN/AEI/10.13039/501100011033 and grants from Conselleria d'Innovacio, Universitats, Ciencia i Societat Digital (CIAICO/2021/061, CIAICO/2022/121 and CIAPOS/2021/87) are gratefully acknowledged. M. N.-M. is thankful to the Universitat de Valencia for her ''Atraccio de Talent 2020'' predoctoral grant. The authors would like to thank the use of RIAIDT-USC analytical facilities for the X-ray crystallography analysis
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Emerging biomodels to understand the pathophysiology of sepsis and evaluate new therapeutic strategies targeting extracellular histones

  • Garcia-Gimenez, Jose Luis
  • Cervera, Marta Seco
  • Canovas-Cervera, Irene
  • Agundez, Ana Belen
  • Dolz-Andres, Enric
  • Mondaray-Munoz, Gonzalo
  • Calpe-Fortea, Rosa
  • Nacher-Sendra, Elena
  • Osca-Verdegal, Rebeca
  • Beltran-Garcia, Jesus
  • Sierra-Rivera, Antonio
  • Peiro-Chova, Lorena
  • Ibañez-Cabellos, J.S.
  • Aparicio-Collado, José Luís|||0000-0003-0874-9131
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Background: Extracellular histones (extH) have emerged as key damage-associated molecular patterns (DAMPs) driving multi-organ failure in sepsis. Despite their correlation with disease severity, organ-specific mechanisms of extH toxicity and targeted therapeutic strategies remain underexplored. Main body: This review dissects extH-mediated pathophysiology across vital organs including heart, lungs, kidneys, liver, and brain, through convergent pathways including TLR activation, NLRP3 inflammasome signaling, NETosis, oxidative stress, calcium influx, pyroptosis, and microvascular thrombosis. Conventional 2D cell cultures fail to recapitulate tissue architecture, multicellular interactions, and hemodynamic forces, while rodent models exhibit poor clinical translatability due to specific immune responses and physiology. Moreover, conventional 2D models and animal models do not usually cover the heterogenicity we can find in sepsis. In contrast, advanced human-relevant 3D biomodels offer transformative advantages: organoids faithfully recreate organ-specific cellular heterogeneity and developmental gradients; 3D-bioprinted biomodels provide precise spatial control of immune-endothelial-stromal interactions within biomimetic matrices; organ-on-chip platforms integrate physiological shear stress, dynamic flow, oxygen gradients, and real-time inter-organ communication, enabling study of extH-driven neutrophil adhesion, platelet aggregation, barrier dysfunction, and cytokine storms under clinically relevant conditions. Conclusion: Next-generation 3D biomodels overcome traditional translational barriers, facilitating the comprehension of the pathophysiological mechanisms occurring in tissues during sepsis. Moreover, these advanced biomodels enable high-throughput screening of extH-neutralizing agents (e.g., heparinoids, anti-histone antibodies) and hemoperfusion technologies, thereby advancing precision intensive care medicine. By bridging mechanistic insights to clinical strategies that mitigate inflammation, endothelial dysfunction, thrombosis and long-term sequelae, these platforms promise transformative advances in sepsis management and intensive care outcomes., We would like to thank all the funding bodies supporting our research projects, including the EIC Accelerator programme, supported by CDTI - NextGenerationEU (Ministerio de Ciencia, Innovacion y Universidades) , as well as the projects CPP2021/008643 and DTS24/00094 funded by the Spanish Ministry of Science and Innovation, projects PI22-00481 and PI25-00664 funded under the Accion Estrategica en Salud programme of the Instituto de Salud Carlos III (Spanish Ministry of Science and Innovation) and the CIAICO/2023/168, CIAPOT/2024/19 and CIPROM/2022/43 PROMETEO project from Generalitat Valenciana. I.Canovas-Cervera thanks the Ministry of Science, Innovation, and Universities for FPU grant (FPU23/02919) J. Aparici-Collado would like to thank Agencia Espanola de Investigacion for a grant Torres Quevedo (PTQ2024-013788) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A phylogenetic analysis of the CDKL protein family unravels its evolutionary history and supports the Drosophila model of CDKL5 deficiency disorder

  • María del Carmen
  • Galindo, Máximo Ibo|||0000-0001-8448-9760
  • Palacios-Martínez, Christian
[EN] The human CDK-like (CDKL) family of serine-threonine kinases has five members (CDKL1-5), with a conserved N-terminal kinase domain and variable C-termini. Among these, CDKL5 is of particular interest because of its involvement in CDKL5 deficiency disorder (CDD), a rare epileptic encephalopathy with several comorbidities for which there are no specific treatments. Current CDD vertebrate models are seizure resistant, which could be explained by the genetic background, including leaky expression of other CDKLs. Thus, phylogenetic analysis of the protein family would be valuable for understanding current models and developing new ones. Our phylogenetic studies revealed that ancestral CDKLs were present in all major eukaryotic clades and had ciliary/flagellar functions, which may have diversified throughout evolution. The original CDKL, which was likely similar to human CDKL5, gave rise to the remaining family members through successive duplications. In addition, particular clades have undergone further gene duplication and loss, a pattern that suggests some functional redundancy among them. A separate study focusing on the C-terminal tail of CDKL5 suggested that this domain is only functionally relevant in jawed vertebrates. We have developed a model of CDD in Drosophila based on downregulation of the single Cdkl gene by RNAi, which results in phenotypes similar to those of CDD patients, that are rescued by re-expression of fly Cdkl and human CDKL5. CDKL proteins contain a conserved kinase domain, originally involved in ciliary maintenance; therefore, invertebrate model organisms can be used to investigate CDKL functions that involve the aforementioned domain., The author(s) declare that financial support was received for the research and/or publication of this article. This work was funded by a CDKL5 Pilot Grant Program from the Orphan Disease Center (University of Pennsylvania) and the Loulou Foundation CDKL5 Program of Excellence (CDKL5-23-101-1). Work in the laboratory of MG was also funded by the PAID Program from Universitat Politecnica de Valencia (PAID-11-22) and by the CIAICO Program from Generalitat Valenciana (CIAICO/2022/204). MM-C was supported by a FPU doctoral grant from the Spanish Ministry of Science and Innovation (FPU23/03090). Some of the equipment employed in this work was funded by Generalitat Valenciana and co-financed with ERDF funds (OP ERDF of Comunitat Valenciana 2014-2020).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Strategies for the protection, conservation and dissemination of traditional architecture: the case of Formentera (Balearic Islands, Spain)

  • Mileto, Camilla|||0000-0002-6987-8802
  • Hueto-Escobar, Alicia|||0000-0003-4628-6545
  • Manzano-Fernández, Sergio|||0000-0001-7936-1324
  • Vegas López-Manzanares, Fernando|||0000-0003-0315-6839
[EN] Traditional architecture faces a series of risks of a very diverse nature, scope and origin, such as cultural homogenisation, industrialisation, the imposition of industrial techniques and materials, changes in lifestyles, the rural exodus, the pressure of tourism, the absence of specific regulations and the lack of appreciation. These risks require diverse actions that integrate research, multidisciplinary collaboration, community inclusion, sustainability, dissemination, normative regulation, compatibility between use, current standards and traditional architectural values, etc. The main objective of this text is to analyse various actions with different scales and scopes developed on the island of Formentera (Balearic Islands, Spain), as examples of a transversal vision and strategy focused on the protection, conservation and dissemination of its traditional architecture. On the one hand, as a result of the National Plan for Cultural Landscape and the National Plan for Traditional Architecture, a management plan model has been developed which establishes principles, criteria and strategies to make the protection of traditional architecture compatible with the impact of tourism and the resulting intervention dynamics. These principles have materialised specifically in the restoration projects of two traditional dwellings, specifically Can Ramon and Sa Senieta. On the other hand, the choice of the island and its traditional architecture as a research object within the European project Versus+ Heritage for People has made it possible to develop different dissemination actions such as exhibitions, workshops and conferences that have brought together researchers, teachers, students, artists, craftsmen, craftswomen and craftswomen from all over the world. From the global scale to the individual action, all these actions aim to highlight the importance of researching, documenting and disseminating the values of traditional architecture, identifying existing risks and, in particular, demonstrating the capacity of such architecture to be restored and inhabited today., This document is part of the research project “VerSus+ / Heritage for People” (Ref. 607593-CREA-1-2019-1-ES-CULTCOOP1) funded by the European Union and the research project “RE-HABITAT – Restauración y rehabilitación sostenible de viviendas tradicionales en contextos históricos” funded by Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital - Generalitat Valenciana (Ref. CIAICO/2022/035).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multifractal Spectrum and Complex Cepstrum Analysis of Armature Currents and Stray Flux Signals for Sparking Detection in DC Motors

  • Guerra-Carmenate, José
  • Iglesias-Martínez, Miguel Enrique|||0000-0003-1405-5099
  • J. Antonino-Daviu|||0000-0003-1898-2228
  • Dunai, Larisa|||0000-0002-5076-0695
  • Conejero, J. Alberto|||0000-0003-3681-7533
  • Fernández de Córdoba, Pedro|||0000-0002-0347-7280
  • Velasco-Pla, Pablo Marino
[EN] Sparking is a common phenomenon in brushed DC motors. Early detection of sparks can prevent their aggravation and promptly adopt appropriate maintenance actions. In this work, we propose the application of a multifractal analysis to armature currents and stray flux signals to detect the presence of sparks in the commutation system of DC motors. Two methodologies are proposed in the paper, the first one using the spectral kurtosis of armature currents and the second one using the flux signal envelope. We apply this method to signals captured both under starting and at steady state to compare their suitability and analyze their feasibility to be used as the basis of the sparking detection method. Additionally, we also propose a quantitative indicator based on the variance of the complex cepstrum to determine the severity of the failure based on the cepstral analysis of both considered signals. The results demonstrate the potential of the approach for sparking detection and sparking level assessment in DC motors and its suitability for potential future incorporation into autonomous systems., The work of Miguel Enrique Iglesias-Martínez was supported in part by the Postdoctoral Research Scholarship Ayudas para la recualificación del sistema universitario español 2021-2023, in part by Modalidad: Margarita Salas , in part by the Ministerio de Universidades, Spain, and in part by the European Union-Next Generation EU and Ayuda para potenciar la investigación postdoctoral (PAID-PD-22) from Universitat Politècnica de València. This work was supported by Generalitat Valenciana under Grant CIAICO/2021/020.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multiple threshold potentials in nanofluidic pores with negative differential resistance

  • Portillo, Sergio
  • Mafe, Salvador
  • Cervera Montesinos, Javier
  • Ramirez Hoyos, Patricio|||0000-0002-0067-4887
  • Bisquert, Juan|||0000-0003-4987-4887
[EN] Negative differential resistance (NDR) phenomena are characterized by a decrease in the electrical current caused by an increase in the applied voltage beyond a threshold value. They are of fundamental interest for nanofluidic sensing and actuating because small changes around the threshold voltage can be amplified under NDR conditions. We have considered here precipitation-induced NDR effects in nanopores bathed in aqueous electrolyte solutions. In the case of multipore membranes, different NDR regions with on and off conductances appear due to distinct threshold potentials. This phenomenon should be of interest for nanofluidic multiple-state memories and multivalued input/output functionalities. As a proof of concept, we implement Boolean (XOR) and reversible (Feynman) logical functions using all-electrical inputs and outputs signals (applied voltage and current) in an electrochemical cell., S.P., P.R., S.M., and J.C. acknowledge the support from the Conselleria d'Educació, Universitats i Ocupació (Generalitat Valenciana), Project No. CIAICO2022-247. J.B. acknowledges he support from the Ministerio de Ciencia, Innovacón y Universidades, Project No. EUR2022-134045/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

How do high temperatures affect rock properties? A comprehensive review of experimental thermal effects and underlying mechanisms

  • Tomás Jover, R.
  • Benavente, David
  • Martínez Ibáñez, Víctor|||0000-0003-4445-2896
  • Garrido De La Torre, Mª Elvira|||0000-0001-7804-3922
[EN] Understanding how rocks behave when exposed to high temperatures is of paramount importance in various geological engineering fields. The effect of temperature in these applications is typically simulated at the laboratory scale to evaluate its impact on both the micro and macro properties of rocks. This paper presents a comprehensive literature review on the practical applications, experimental methods, changes in properties, physical and mechanical processes, and the controlling factors in rocks exposed to high temperatures. To this end, a dataset was compiled comprising of 10,000 temperature-property pairs, leading to 1360 temperatureproperty evolution curves. The review first examines the main motivations behind these studies to identify the practical applications of studying rocks and the thermal effects of temperature. It then highlights the experimental methods, such as heating techniques, temperature gradients, duration of heating, cooling methods, and maximum temperatures, while noting a wide disparity of procedures. Subsequently, laboratory techniques are identified for evaluating the consequences of high temperatures, including visual and microstructural characterization, as well as the assessment of physical, mechanical, thermal, and hydraulic properties of rocks. The evolution of these properties for different rock types is described. Key thermal processes are then discussed, such as chemical reactions and physical changes. Additionally, techniques for estimating microstructural thermal damage and the conditioning factors that control the evolution of rock properties are reviewed. Finally, modelling techniques used to simulate heat transfer, stress-strain distribution, and thermal cracking, as well as the prediction of mechanical properties using numerical methods, particle-based approaches, and artificial intelligence are also reviewed., This work was partially funded by the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital within the framework of the project CIAICO/2021/335, the Spanish Ministry of Science, Innovation and Universities under the project PID2022-139990NB-I00, the Fundacion Espanola para la Ciencia y la Tecnología under the project FCT-24-20125 and by the University of Alicante (UASTI23-21).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multiple Negative Differential Resistances in Nanofluidic Conical Pores: A Phenomenological Model

  • Cervera, Javier
  • Portillo, Sergio
  • Nasir, Saima
  • Ali, Mubarak
  • Ensinger, Wolfgang
  • Mafe, Salvador
  • Ramirez Hoyos, Patricio|||0000-0002-0067-4887
[EN] Ionic flow nonlinear effects are helpful for sensing and signal processing in nanofluidic systems. Here, we develop a simple phenomenological model based on a distribution of Boltzmann-like electrical conductances to describe different forms of voltage-controlled negative differential resistance observed in charged conical nanopores. Multiple negative differential resistance phenomena show abrupt drops in the ionic current when the applied voltage exceeds a series of threshold voltages. We use the phenomenological model to describe the multiple states resulting from externally controlled salt precipitation at the conical pore tips. We consider both single- and multipore membranes, together with parallel and antiparallel arrangements of two membranes, as a function of the applied voltage, salt type, ionic concentration, and temperature., J.C., P.R., and S.M. acknowledge the support from the Conselleria d'Educacio, Universitats i Ocupacio (Generalitat Valenciana), Project CIAICO2022-247.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Otros (Other)

Fundamentals for the design of energy management strategies for smart grids based on predictive control techniques. Methodology and case studies (EMS validation test)

  • Pajares-Ferrando, Alberto|||0000-0002-2036-2709
  • Blasco, Xavier|||0000-0002-9737-2833
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Vivas Fernandez, Francisco José
  • Segura Manzano, Francisca
  • Andújar Márquez, José Manuel
This document compiles all the simulations performed to validate the EMS developed in the paper "Fundamentals for the design of energy management strategies for smart grids based on predictive control techniques. Methodology and case studies", This work was supported in part by grant PID2020-116616RB-C31 and grant PID2021-124908NB-I00 founded by MCIN/AEI/10.13039/501100011033 and by ‘‘ERDF A way of making Europe’’; by the Generalitat Valenciana regional government through project CIAICO/2021/064, by Andalusian Regional Program of R+D+i (P20- 00730), and by the project “The green hydrogen vector. Residential and mobility application”, approved in the call for research projects of the Cepsa Foundation Chair of the University of Huelva. Funding for open access charge: CRUE-Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Determining hypercentral Hall subgroups in finite groups

  • Sotomayor, Víctor|||0000-0001-8649-5742
[EN] Let G be a finite group, and let ¿ be a set of primes. The aim of this paper is to obtain some results concerning how much information about the ¿-structure of G can be gathered from the knowledge of the sizes of conjugacy classes of its ¿-elements and of their multiplicities. Among other results, we prove that this multiset of class sizes determines whether G has a hypercentral Hall ¿-subgroup., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This research is supported by Ayuda a Primeros Proyectos de Investigación (PAID-06 23), Vicerrectorado de Investigación de la Universitat Politècnica de València (UPV), and by Proyecto CIAICO/2021/163 from Generalitat Valenciana (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Antibiotic Resistance in Seawater Samples from East Coast of Spain

  • Dasí, Diego
  • Camaró-Sala. Maria Luisa
  • González Pellicer, Ana|||0000-0003-0173-6207
  • García-Ferrús, Miguel|||0000-0001-6171-5171
  • Jiménez Belenguer, Ana Isabel|||0000-0002-3329-7221
  • Castillo López, María-Ángeles|||0000-0002-8534-8940
[EN] Seawater has been proposed as a reservoir for antibiotic-resistant bacteria and antibiotic resistance genes, thus representing a risk to public health. In this study, we evaluated the presence of antibiotic resistance determinants (bacteria and genes) in 77 seawater samples collected at different points along the coast of the Gulf of Valencia (Spain). Specifically, indicators of fecal contamination bacteria, Escherichia coli and Enterococcus sp., were isolated, and their antibiotic resistance profiles were analyzed through the use of the Sensititre® system, followed by the detection of the main antibiotic resistance genes (blaTEM, qnrS, tetW, sulI, and ermB). The highest frequencies of resistance in the E. coli isolates were detected for ampicillin (35.1%) and ciprofloxacin (17.5%), followed by sulfamethoxazole and trimethoprim (15.7%), while 23% of enterococci isolates showed resistance to a single antibiotic, 20% against tetracycline and 3% against daptomycin. Through PCR analysis, 93% of the E. coli strains showed the blaTEM and sulI resistance genes. Among the enterococci, the presence of the blaTEM gene was detected in 40% of the isolates, while the rest of the genes were present at very low rates. Among the water samples, 57% were positive for at least one of the tested genes, italic format with blaTEM being the most commonly found gene (47%), followed by the qnrS (33%) and sulI (23%) genes. These results show that seawater, in addition to being subjected to a high rate of fecal contamination, can contribute to the spread of antibiotic resistance., This research was funded by CIAICO/2021/149. Generalitat Valenciana (Comunitat Valenciana, Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Demand-Side Management Method for Households with Self-Generation and Storage of Electricity

  • León-Martínez, Vicente|||0000-0002-1906-371X
  • Andrada-Monrós, Clara|||0000-0001-6344-6649
  • Saiz, Juan Ángel
  • Peñalvo-López, Elisa
[EN] The main objective is to propose a calculation method for assessing the benefits of individual domestic prosumers in self-consumption and economic savings when managing their own energy resources. The paper applies the demand-side management concept in the residential sector from the individual domestic perspective so that customers can understand the value of their own sustainable energy resources, conducting self-generation and demand management. The novelty lies in allowing the prosumer to manage their own energy resources to their benefit at a reasonable cost, instead of participating in automated large residential demand-side-management programmes that respond to the means of the grid system operator or other energy service companies, such as aggregators. A methodology for calculating the self-consumption rate and the economic benefit for the consumer is proposed, including three different cases: consumer demand is higher than self-generation, and consumer demand is equal to self-generation, and consumer demand is lower than self-generation. The methodology is validated with actual data from a household in Valencia (Spain) during a complete year, obtaining an average reduction in the annual electricity bill of 70% and a demand coverage with the self-renewable system reaching values of 80% throughout the year. The significance of this methodology goes beyond the economic revenue of the individual consumer; it also aims to guide consumers towards efficient practices in the use of their available energy resources and raise awareness on their energy behaviour., This research and APC were funded by Generalitat Valenciana, the regional government of Valencian Region, within the ValREM Project (CIAICO/2022/007).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A novel energy management system based on two-level hierarchical economic model predictive control for use in microgrid control

  • Vivas, F. J.
  • Segura, F.
  • Andújar, J.M.
  • Pajares-Ferrando, Alberto|||0000-0002-2036-2709
  • Blasco, Xavier|||0000-0002-9737-2833
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
[EN] This study proposes an innovative energy management system (EMS) based on two-level hierarchical model predictive control, designed for microgrid control. MPC-based EMS are economically efficient and beneficial, although the real-time implementation often requires hierarchical structures due to high computational costs. The high level defines a long-term economic optimisation, with a longer sampling period and prediction horizon. Traditionally, the lower level is based on a tracking index of the high-level reference with a shorter sampling period and prediction horizon. In this case, it is necessary to determine the optimisation index weights, a complex selection that depends on the specific characteristics of each microgrid. Generally, the weights are determined by trial and error, lacking a clear physical meaning. Therefore, in this work, a new approach is proposed where the low level performs economic optimisation (similar to high level) in a short-term. Both approaches were evaluated through a practical case in a microgrid. The results obtained show that the traditional tracking approach can generate undesirable effects (unnecessary energy transactions and frequent switching of devices) that produces economic losses, which can only be mitigated by a careful adjustment of the weights. In contrast, the proposed economic approach eliminates these undesirable behaviours, and the need for weight definition, achieving an economic improvement of 3-25%. Therefore, the results confirmed the effectiveness of the proposed new approach, which provides better economic results while overcoming the limitations of traditional tracking methods., This work was supported in part by grant PID2023-148456OB-C41 and grant PID2021-124908NB-I00 founded by the Spanish Ministry of Economy and Competitiveness, and RED2022-134588-T REDGENERA founded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe"; by the Generalitat Valenciana regional government through project CIAICO/2021/064.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synergistic In Vitro Antiviral Effect of Combinations of Ivermectin, Essential Oils, and 18-(Phthalimid-2-yl)ferruginol against Arboviruses and Herpesvirus

  • Betancur-Galvis, Liliana
  • Jimenez-Jarava, Orlando José
  • Rivas, Fatima
  • Mendoza-Hernández, William E.
  • González-Cardenete, Miguel A|||0000-0002-8762-0426
[EN] Combining antiviral drugs with different mechanisms of action can help prevent the development of resistance by attacking the infectious agent through multiple pathways. Additionally, by using faster and more economical screening methods, effective synergistic drug candidates can be rapidly identified, facilitating faster paths to clinical testing. In this work, a rapid method was standardized to identify possible synergisms from drug combinations. We analyzed the possible reduction in the antiviral effective concentration of drugs already approved by the FDA, such as ivermectin (IVM), ribavirin (RIBA), and acyclovir (ACV) against Zika virus (ZIKV), Chikungunya virus (CHIKV), and herpes virus type 2 (HHV-2). Essential oils (EOs) were also included in the study since they have been reported for more than a couple of decades to have broad-spectrum antiviral activity. We also continued studying the antiviral properties of one of our patented molecules with broad-spectrum antiviral activity, the ferruginol analog 18-(phthalimid-2-yl)ferruginol (phthFGL), which presented an IC99 of 25.6 mu M for the three types of virus. In general, the combination of IVM, phthFGL, and oregano EO showed the greatest synergism potential against CHIKV, ZIKV, and HHV-2. For instance, this combination achieved reductions in the IC99 value of each component up to similar to 8-, similar to 27-, and similar to 12-fold for CHIKV, respectively. The ternary combination of RIBA, phthFGL, and oregano EO was slightly more efficient than the binary combination RIBA/phthFGL but much less efficient than IVM, phthFGL, and oregano EO, which indicates that IVM could contribute more to the differentiation of cell targets (for example via the inhibition of the host heterodimeric importin IMP alpha/beta 1 complex) than ribavirin. Statistical analysis showed significant differences among the combination groups tested, especially in the HHV-2 and CHIKV models, with p = 0.0098. Additionally, phthFGL showed a good pharmacokinetic profile that should encourage future optimization studies., This research and the APC were funded by the regional government "Generalitat Valenciana, Conselleria de Educacion, Universidades y Empleo", grant number CIAICO/2022/220. The Universitat Politecnica de Valencia also funded this research under a cooperation "ADSIDEO"research grant (AD1902). Financial support was also provided by the Colombian government "Colciencias, Patrimonio Autonomo del Fondo Nacional de Financiamiento para la Ciencia, la Tecnologiay la Innovacion, Francisco Josede Caldas-Colombia", grant 7442016 (contract 648- 2017/project 111574455595), "CODI, Comitepara el Desarrollo de la Investigacion-Universidad de Antioquia",grant "Apoyo a la Internacionalizacion de la Ciencia, Vicerrectoria de Investigacion UdeA", and the Board of Regents Support Fund Award LEQSF-RD-A-05.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Morphological and genetic differences of CM59 Muscat of Alexandria clone: the whitest Muscat in La Marina Alta, Spain

  • Esteras Gómez, Cristina|||0000-0002-8789-4363
  • Picó Sirvent, María Belén|||0000-0001-7761-990X
  • Gisbert, Carmina|||0000-0002-4620-1065
  • Soler, JX
  • Martínez-Gil, F.
  • Ruiz Martínez, Juan José
[EN] La Marina Alta, a region in the Alicante province of Spain, exhibits significant variability in the grapevine cultivar `Muscat of Alexandria¿. Within the selected clones in this region, CM59 stands out for its medium-sized berries, which are notably whiter than those of other Muscat clones in the area. CM59 also distinguishes itself through various agronomical traits, including differences in maturity and resistance to pests. Grown in different old vineyards, this clone demonstrates a favorable compatibility with various rootstocks and is particularly valued for table consumption. Despite its significance, there are limited references to this specific type of Muscat of Alexandria in available bibliographic resources, underscoring the importance of its characterization. This study focuses on reporting ampelographic traits and general agronomic aspects of the CM59 clone. Additionally, by analyzing nearly 40,000 single nucleotide polymorphisms (SNPs) identified in a genotyping-by-sequencing (GBS) assay involving a small set of Muscat of Alexandria clones, approximately 2,600 SNPs were found to differ between CM59 and the other clones. In-depth analysis revealed those that could have a moderate impact (non-synonymous) or high impact, primarily involving start site loss or stop site gain. Noteworthy that among these later are genes associated with proteases controlling stomatal development, responses to abiotic and biotic stresses, expression regulation at pre- and post-translational levels, protein folding, transporters, grape pigmentation, apical development, regulation of flowering, growth, and signaling pathways. This comprehensive exploration of genetic variations provides valuable insights into the unique characteristics of the CM59 clone, contributing to our understanding of the genetic basis of its distinctive traits. This work was funded by Generalitat Valenciana (grant CIAICO/2021/118)., This work was funded by Generalitat Valenciana (grant CIAICO/2021/118).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Advancing Sustainable Plastics through the Optimization of Glycerolplasticized Gluten as a Renewable Polymer Alternative

  • Peñafiel-Alvarado, J. I.
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Balart, Rafael|||0000-0001-5670-7126
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
[EN] This study investigates the development of gluten-based samples through extrusion and injection molding, focusing on optimizing extrusion conditions to enhance material properties. During the extrusion process, the combined effect of shear and heat induces protein denaturation, promoting the formation of ß-sheets as confirmed by chemical characterization. Variations in extrusion parameters affect the torque evolution throughout processing, revealing their influence on structural behavior. A statistical analysis identified extrusion temperature, time, and screw speed as significant factors determining the mechanical performance of the samples. Thermal and thermo-mechanical analyses revealed that increasing extrusion severity resulted in an increase in tensile strength (from 2.80 to 4.14 MPa) and stiffness (from 133 to 280 MPa), along with an increase in elongation at break (from 11.7 to 29.8%). Additionally, the denaturation peak shifted from 93.1 °C to 78.2 °C, with a reduction in enthalpy from 170.6 to 57.2 J/g. Dynamic mechanical analysis showed an increase in storage modulus (from 30.2 to 45.1 MPa). Despite extensive prior research indicating that processing variables significantly influence protein denaturation and the resulting material characteristics, the distinct and synergistic impacts of critical extrusion parameters on thermoplastic gluten systems remain insufficiently understood. The present analysis underscores that precise regulation of extrusion conditions plays a fundamental role in modulating both the mechanical behavior and thermal stability of gluten-derived materials, thereby enabling the optimization of their functional performance., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This research is a part of the grant PID2023-152869OB-C22, and thegrant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. Theauthors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. J. Ivorra-Martinez thanks Generalitat Valenciana - GVA for funding a postdoc position through the CIAPOS program co-funded by ESF Investing in yourfuture, grant number CIAPOS/2023/362. Funding for open access charge: CRUE-Universitat Politècnica de València. J. Gomez-Caturla wants tothank FPU20/01732 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. Grant JDC2024-053063-Ifunded by MICIU/AEI /10.13039/501100011033 and by the FSE+. Grant JDC2024-053152-I funded by MICIU/AEI /10.13039/501100011033and by the FSE+.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Consumer subjective impressions in virtual reality environments: The role of the visualization technique in product evaluation

  • Palacios-Ibáñez, Almudena
  • Felip-Miralles, Francisco
  • Galán, Julia
  • García-García, Carlos
  • Contero, Manuel|||0000-0002-6081-9988
[EN] The availability and affordability of consumer virtual reality (VR) devices have fueled their adoption during the product design process. High fidelity virtual prototypes can be created more quickly and are more cost-effective than using traditional methods, but certain product features are still difficult to evaluate, resulting in perceptual differences when a product is assessed using different visualization techniques. In this paper, we report two case studies in which a group of participants evaluated different designs of a product typology (i.e., a watering can) as presented in VR, VR with passive haptics (VRPH) and in a real setting (R) for the first case study, and VR and R for the second case study. The semantic differential technique was used for product evaluation, and an inferential statistical method using aligned rank transform (ART) proceedings was applied to determine perceptual differences between groups. Our results showed that product characteristics assessed by touch are the most susceptible to being affected by the environment, while the user background can have an effect in some product features., This work was funded by: (1) Spanish Ministry of Education and Vocational Training [FPU19/03878]; (2) Generalitat Valenciana [CIAICO/2021/037], and (3) Universitat Jaume I [UJIB2019-39]. The APC was waived for this research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Monitoring holograms for therapeutic ultrasound using passive cavitation beamforming

  • Lamothe, Nathalie
  • Andrés-Bautista, Diana
  • Pineda-Pardo, J.A.
  • CARRIÓN GARCÍA, ALICIA|||0000-0002-0630-6065
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
  • Jimenez, Noe|||0000-0002-6539-670X
[EN] Acoustic holograms can generate cavitation patterns of complex spatial distribution by shaping and steering the focal spot of therapeutic ultrasound systems. However, when monitoring these systems by passive cavitation detection, off-axis therapeutical targets and the receiver directivity may not be aligned. In this paper, we present passive cavitation beamforming to monitor a therapeutical ultrasound system using holograms targeted to arbitrary locations, in which both therapeutic and passive cavitation monitoring systems use 3D-printed acoustic lenses. The therapeutic system uses an acoustic hologram to focus the ultrasound beam on the target, which is off-axis. Then, a second lens is designed to beamform the cavitation signals which emerge from the therapeutic target, steering the directivity of the passive cavitation detector in the direction of the therapeutic focus and, in addition, compensating for skull aberrations. The system is experimentally tested with an ex-vivo macaque skull and a blood vessel phantom with microbubbles. In addition, results are compared with a standard confocal configuration and an off-axis configuration in the absence of the monitor lens. A parametric study is performed by varying the amplitude of the emitted signal and the impact on the behaviour of the microbubbles is analysed based on the cavitation index values. Results show that monitoring holograms align the passive cavitation detector response with the focal spot of the targeted therapeutic transducer. These holograms encode a fixed beamformer for cavitation signals in reception, increasing the sensitivity of cavitation emission at the target. In this way, cavitation doses can be used to locally monitor the cavitation activity of microbubbles, thus opening a new path to low-cost monitoring of therapeutic ultrasound systems., This research has been supported by the Ministerio Español de Ciencia e Innovación and the Ministerio de Universidades grants FJC2019-040453-I, RYC2021-034920-I, FPU19/00601 and Agencia Estatal de Investigación grants PID2022-142719OB-C21 and CNS2023-145707 funded by MCIN/AEI/10.13039/501100011033; Agència Valenciana de la Innovació grants INNVA2/2022/11 and INNEST/2022/345; Generalitat Valenciana grants EDGJID/2021/189, CIGE/2021/175, CIAICO/2023/052, CIPROM/2021/003, FDEGENT/2019/004 and IDIFEDER/2021/004.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dispersion relations of generalized one-dimensional phononic crystals

  • Lázaro, Mario|||0000-0003-4949-8295
  • Romero-García, Vicente|||0000-0002-3798-6454
  • Wiltshaw, Richard
  • Craster, Richard V.
[EN] We present a comprehensive method for determining both exact and approximate dispersion relations for one-dimensional resonant phononic crystals, applicable to a wide range of structures, regardless of their specific characteristics. This general framework employs a unified mathematical model, referred to as generalized one-dimensional phononic crystal, in which different types of waves and scatterers/resonators can be considered by adjusting certain parameters. The generalized one-dimensional phononic crystal consists of both a host one-dimensional homogeneous elastic material with physical properties represented in matrix form and an arbitrary set of scatterers within the unit cell, including resonators (discrete and continuous), small material inclusions or variations in cross-sectional area. Based on general assumptions, and imposing the periodicity and Bloch solutions, we develop a matrix-based algorithm using the plane wave expansion method to derive the solution. Additionally, we propose an iterative procedure that provides analytical expressions for the first- and second-order terms, particularly useful in the context of weak scattering. The convergence conditions of the method are rigorously defined. The efficiency of the approach is demonstrated through several numerical examples, highlighting its versatility in different waveguide configurations and scattering scenarios., M.L. and V.R.-G. are grateful for the partial support (grant no. PID2020-112759GB-I00) funded by MCIN/AEI/10.13039/501100011033 and also for the partial support (grant no. PID2023-146237NB-I00) funded by MICIU/AEI/10.13039/501100011033. M.L. and V.R.-G. acknowledge support (grant nos. CIAICO/2022/052 and CIAICO/2024/318) of the 'Programa para la promocion de la investigacion cientifica, el desarrollo tecnologico y la innovacion en la Comunitat Valenciana' funded by Generalitat Valenciana. M.L. is grateful for support (grant no. UNI/551/2021): 'Programa de Recualificacion del Sistema Universitario Espanol para 2021-2023', funded by 'Instrumento Europeo de Recuperacion (Next Generation EU) en el marco del Plan de Recuperacion, Transformacion y Resiliencia de Espana', a traves del Ministerio de Universidades. R.W. and R.V.C. acknowledge financial support from the EU H2020FET-proactive project MetaVEH under grant agreement no. 952039.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Relationship between neck kinematics and neck dissability index. An approach based on functional regression

  • Aragón-Basanta, Elisa
  • Venegas, William
  • Ayala, Guillermo
  • Serra-Añó, Pilar
  • Page Del Pozo, Alvaro Felipe|||0000-0002-5432-310X
[EN] Numerous studies use numerical variables of neck movement to predict the level of severity of a pathology. However, the correlation between these numerical variables and disability levels is low, less than 0.4 in the best cases, even less in subjects with nonspecific neck pain. This work aims to use Functional Data Analysis (FDA), in particular scalar-on-function regression, to predict the Neck Disability Index (NDI) of subjects with nonspecific neck pain using the complete movement as predictors. Several functional regression models have been implemented, doubling the multiple correlation coefficient obtained when only scalar predictors are used. The best predictive model considers the angular velocity curves as a predictor, obtaining a multiple correlation coefficient of 0.64. In addition, functional models facilitate the interpretation of the relationship between the kinematic curves and the NDI since they allow identifying which parts of the curves most influence the differences in the predicted variable. In this case, the movement¿s braking phases contribute to a greater or lesser NDI. So, it is concluded that functional regression models have greater predictive capacity than usual ones by considering practically all the information in the curve while allowing a physical interpretation of the results.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Families of efficient low order processed composition methods

  • Blanes Zamora, Sergio|||0000-0001-5819-8898
  • Casas, Fernando
  • Escorihuela-Tomàs, A.
[EN] New families of composition methods with processing of order 4 and 6 are presented and analyzed. They are specifically designed to be used for the numerical integration of differential equations whose vector field is separated into three or more parts which are explicitly solvable. The new schemes are shown to be more efficient than previous state-of-the-art splitting methods., This work has been funded by Ministerio de Ciencia e Innovación (Spain) through project PID2022-136585NB-C21, MCIN/AEI/10.13039/501100011033/FEDER, UE, and also by Generalitat Valenciana (Spain) through project CIAICO/2021/180.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Towards the Recovery of Traditional Hot-Mixed Lime Techniques: Influence on the Construction Process and Structural Behaviour in Rammed Earth with Lime

  • Mileto, Camilla|||0000-0002-6987-8802
  • Vegas López-Manzanares, Fernando|||0000-0003-0315-6839
  • Hueto-Escobar, Alicia|||0000-0003-4628-6545
  • Manzano-Fernández, Sergio|||0000-0001-7936-1324
[EN] Despite the widespread imposition of other types of industrial lime, the recovery of hot-mixed lime techniques is of interest both in its application in historic heritage interventions and its possible application in contemporary constructions. This article aims to contribute to this recovery through an initial phase of application to construction through the execution of reinforced rammed earth walls and test samples, providing conclusions on the practical implications of this traditional lime-slaking method. These test samples executions were then followed by a second phase of compression tests, incorporating further tests on samples of hot-mixed lime, air lime and hydraulic lime at different points in time. Thus, initial conclusions were established on the effect of hotmixed lime on mechanical properties and their evolution over time compared to other industrial limes. Although the traditional method for slaking quicklime and its use in construction as hot-mixed lime is relatively straightforward, it is necessary to control its correct slaking and apply certain safety measures. The use of hot-mixed lime in reinforced rammed earth walls presents a slightly higher mean compressive strength than those which use slaked air lime and a mean compressive strength similar to that obtained with slaked hydraulic lime in initial phases, although it appears to be conditioned by the form of quicklime used. Based on these contributions the viable use of hot-mixed lime for construction or intervention in rammed earth walls is established and proves particularly advantageous in terms of structural advantages., This work was funded by Cátedra EMR-CPA. This research is included in the research project Earth4Future: Sustainable reuse of earthen architecture and its lessons for contemporary architecture (Reference PID2022-139154OB-I00), funded by the Spanish Ministry of Science, Innovation and University and in the research project Re-Habitat: Restauración y rehabilitación sostenible de viviendas tradicionales en contextos históricos (Reference CIAICO/2022/035) funded by the Regional Ministry for Innovation, Universities, Science and Digital Society of the Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modeling Physical Activity Profiles in COPD Patients: A Basis Expansion Approach to Variable Domain Functional Regression Models

  • Hernández-Amaro, Pavel
  • Durban, María
  • Esteban Gonzalez, Cristobal
  • Arostegui, Inmaculada
  • Aguilera-Morillo, M. Carmen|||0000-0003-1027-9773
[EN] Physical activity plays an important role in the well-being of patients with Chronic Obstructive Pulmonary Disease (COPD). The telEPOC program, developed at the Galdakao-Usansolo University Hospital (Vizcaya, Spain), provided a telemonitoring data set resulting in a variable domain functional data set. In this sense, the aim is to study the impact of physical activity (measured as daily steps collected in a time interval delimited by the patient's participation in the experiment) on the rate of hospitalizations. To address this challenge, a novel basis expansion approach is proposed to fit a variable-domain functional regression model, which assumes the functional nature of the covariate (daily steps) and incorporates the sample data into the model without alignment. This will enrich the interpretability of the model by incorporating the information provided by the domain through a two-dimensional regression coefficient. In addition, a penalized estimation of the model is proposed in terms of a 2D P-spline penalty, which allows considering different degree of smoothness for each dimension of the functional regression coefficient (anisotropic penalty). The performance of our methodology is also tested and compared with state-of-the-art methods by means of a simulation study. Software for our method can be found in the VDPO R package available in CRAN., This work is supported by the grants PID2022-137243OB-I00 from the Spanish Ministry of Science, Innovation and Universities MCIN/AEI/10.13039/501100011033 and by CIAICO/2023/189 from the Conselleria de Educacion, Universidades y Empleo de la Generalitat Valenciana. This support is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Transcription factor-based biosensors for screening and dynamic regulation

  • Tellechea-Luzardo, Jonathan
  • Stiebritz, Martin T.
  • Carbonell, Pablo|||0000-0002-0993-5625
[EN] Advances in synthetic biology and genetic engineering are bringing into the spotlight a wide range of bio-based applications that demand better sensing and control of biological behaviours. Transcription factor (TF)-based biosensors are promising tools that can be used to detect several types of chemical compounds and elicit a response according to the desired application. However, the wider use of this type of device is still hindered by several challenges, which can be addressed by increasing the current metabolite-activated transcription factor knowledge base, developing better methods to identify new transcription factors, and improving the overall workflow for the design of novel biosensor circuits. These improvements are particularly important in the bioproduction field, where researchers need better biosensor-based approaches for screening production-strains and precise dynamic regulation strategies. In this work, we summarize what is currently known about transcription factor-based biosensors, discuss recent experimental and computational approaches targeted at their modification and improvement, and suggest possible future research directions based on two applications: bioproduction screening and dynamic regulation of genetic circuits., JT-L was supported by European Union Marie Sklodowska-Curie Action Individual Postdoctoral Fellowship (Grant agreement ID: 101062593). JT-L was supported by the Next-Generation EU (NGEU) fund through the Spanish Recovery, Transformation and Resilience Plan via a Margarita Salas personal grant from the Spanish Ministry of Universities (UNI/551/2021). MS was supported by the NextGeneration EU (NGEU) fund through the Spanish Recovery, Transformation and Resilience Plan via a María Zambrano personal grant from the Spanish Ministry of Universities (UNI/551/2021). PC acknowledges MCIN/AEI/10.13039/501100011033 funding through PID2020-117271RB-C2 (BIODYNAMICS). PC was supported by the Spanish Ministry of Universities (UNI/551/2021), grant number UP 2021-036 funded by European Union - Next-generation EU. This research received financial support from Generalitat Valenciana through grant CIAICO/2021/159 (SmartBioFab). PC acknowledges MCIN/AEI/10.13039/501100011033 and NextGenerationEU/PRTR funding through grant TED 2021-131049 B-I00 (BioEcoDBTL). PC acknowledges MCIN/AEI/10.13039/501100011033 funding through grant PID 2021-127888NA-I00 (COMPSYNBIO).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Role of electric and magnetic fields in the densification and grain growth of CaMnO3 perovskite sintered by microwave

  • Martins Mansano Rosa , João Paulo
  • Borges da Hora, Lara Cristina
  • Thomazini, Daniel
  • Gelfuso, Maria Virginia
  • Penaranda-Foix, Felipe L.|||0000-0003-4012-0763
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
[EN] This study investigates how electric and/or magnetic fields influence the densification and microstructural evolution of microwave-sintered CaMnO3 (CMO) thermoelectric ceramics. Experiments used a maximum magnetic field microwave configuration (H-MW) from 900 °C to 1300 °C at various dwell times. Temperature and dwell time strongly influenced both densification and grain growth. Optimal densification (~90% relative density) occurred at 1300 °C for 15¿min. Longer dwell times reduced final density due to abnormal grain growth. Furthermore, grain growth mechanisms transitioned with temperature from grain boundary (n= 4) to lattice diffusion (n = 3), with activation energy increasing with dwell time, due to marokite consumption into the sintering process. Overall, the H-MW configuration enables efficient densification and microstructural control, demonstrating its effectiveness in tailoring CMO sintering kinetics for thermoelectric applications., This publication is part of the grants CNS2023-144190 funded by MICIU/AEI/10.13039/501100011033, "ERDF/EU" and the "European Union NextGenerationEU/PRTR", and Generalitat Valenciana of the grant CIAICO/2023/264. To National Council for Scientific and Technological Development of Brazil (CNPq-Grant (316730/2023-8) and Minas Gerais State Foundation of Support to the Research (FAPEMIG-Grant APQ-01856-22) for the financial grant. Joao Paulo Martins Mansano Rosa gratefully acknowledges the financial support of a doctoral fellowship provided by the Coordination for the Improvement of Higher Level or Education-Personnel (CAPES), under Grant No 23038.003930/2024-79.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Matheuristic Approach for the Bi-Objective and Multi-Source Team Orienteering Problem with Prioritized Nodes

  • Oltra Crespo, Sandra|||0000-0003-1995-2557
  • Agud Albesa, Lucia|||0000-0002-1222-7988
  • Garrido-Saez, Neus|||0000-0002-7903-8591
  • Juan, Angel A.|||0000-0003-1392-1776
[EN] This work proposes a matheuristic approach that combines heuristic techniques with mathematical optimization to address a bi-objective, multi-source team orienteering problem. During the exploration phase, nodes are assigned to depots using a biased-randomized round-robin heuristic, guided by a ranking criterion based on marginal distances. This step aims to generate diverse mappings and identify those that lead to promising solutions under a convex combination of the two objectives: total reward and number of priority nodes visited. In the exploitation phase, an intensive search is applied to a subset of elite mappings, further improving the quality of the solutions. The method produces a Pareto frontier, offering a range of trade-offs between the two objectives. Computational experiments on adapted benchmark instances confirm the method¿s ability to generate high-quality or near-optimal solutions, often outperforming exact methods under realistic time constraints., This work has been partially supported by the Spanish Ministry of Science, Innovation and Universities MICIU/AEI/10.13039/501100011033 (PID2025-169830NB-I00, AIA2025-163553-C44, PID2022-138860NB-I00), the Generalitat Valenciana (2024 CIAICO 117) and the Universitat Politècnica de València (PAID-06-25).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Automatic Classification of Field Winding Faults in Synchronous Motors based on Bicoherence Image Segmentation and Higher Order Statistics of Stray Flux Signals

  • Iglesias-Martínez, Miguel Enrique|||0000-0003-1405-5099
  • Guerra-Carmenate, José
  • J. Antonino-Daviu|||0000-0003-1898-2228
  • Dunai, Larisa|||0000-0002-5076-0695
  • Conejero, J. Alberto|||0000-0003-3681-7533
  • Fernández de Córdoba, Pedro|||0000-0002-0347-7280
  • Platero, Carlos A.
[EN] In this work, the application of the bicoherence (a squared normalized version of the bispectrum) of the stray flux signal is proposed as a way of detecting faults in the field winding of synchronous motors. These signals are analyzed both under the starting and at steady state regime. Likewise, two quantitative indicators are proposed, the first one based on the maximum values of the asymmetry and the kurtosis of the bicoherence matrix obtained from the flux signals and the second one relying on an algorithm based on the bicoherence image segmentation of the obtained pattern for each analyzed state. The results are analyzed through a comparative study for the two considered motor regimes, obtaining satisfactory results that sustain the potential application of the proposed methodology for the automatic field winding fault detection in real applications., Miguel E. Iglesias Martínez s work was supported by the postdoctoral research scholarship "Ayudas para la recualificación del sistema universitario español 2021-2023. Modalidad: Margarita Salas", UPV, Ministerio de Universidades, Plan de Recuperación, Transformación y Resiliencia, Spain. Funded by the European Union-Next Generation EU. This work is also supported by Generalitat Valenciana (reference CIAICO/2021/020)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Combined matrix of diagonally equipotent matrices

  • Bru García, Rafael
  • Gasso Matoses, María Teresa
  • Gimenez Manglano, María Isabel
  • Santana-De Asis, Máximo De Jesús
  • Scott-Guilleard, José Antonio
[EN] LetC(A) = A (sic) A(-T) be the combined matrix of an invertible matrix A, where (sic) means the Hadamard product of matrices. In this work, we study the combined matrix of a nonsingular matrix, which is an H-matrix whose comparison matrix is singular. In particular, we focus on C(A) when A is diagonally equipotent, and we study whether C(A) is an H-matrix and to which class it belongs. Moreover, we give some properties on the diagonal dominance of these matrices and on their comparison matrices., This work was partially supported by the Conselleria d Inovació, Universitats, Ciència i Societat Digital of the Generalitat Valenciana grant under the program CIAICO/2021/162 and by the Dominican Republic FONDOCYT grant 2020-2021-1D1-121.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mapping the social impact of menstrual stigma in Spain

  • Sánchez-López, S.|||0000-0001-7680-023X
  • Poveda Bautista, Rocio|||0000-0001-8904-5421
  • Moll López, Santiago Emmanuel|||0000-0003-3388-5135
  • Barrington, Dani Jeniffer
[EN] Background: This study investigates the social impact of menstrual stigma in Spain. Whilst menstruation is a biological process, it is shaped by cultural norms that influence how it is perceived, experienced, and managed. Methods: A nationwide cross-sectional mixed-methods survey was conducted with 4,028 participants aged 14 years and older. Quantitative items were analysed using descriptive statistics, while qualitative open-ended responses were thematically analysed through a constructivist lens to explore social perceptions, behavioural responses, and institutional dynamics related to menstruation. Results: Menstruation affects participation in everyday activities, particularly those involving physical exposure such as sports, swimming, or wearing certain types of clothing. While some respondents reported avoiding activities due to physical symptoms, others cited anxiety, fear of leakage, or social discomfort, reflecting internalised stigma. In professional and educational settings, participants described presenteeism, reluctance to take leave, and a sense of pressure to minimise or conceal menstrual needs. Experiences of exclusion, whether from religious rituals, traditional roles, or interpersonal interactions, were also reported. Despite these challenges, the study highlights the positive role of supportive social environments. Solidarity, peer empathy, and institutional flexibility were identified as protective factors that help counter the effects of stigma. However, gaps in menstrual education and limited integration of menstrual health in clinical contexts continue to pose barriers to well-being and equity. Conclusion: The findings underscore the need to recognise menstruation as a relevant factor in public health, education, and workplace inclusion. Addressing menstrual stigma requires structural attention and a shift from individual responsibility to collective and institutional support., This work was supported by the Generalitat Valenciana (GVA) under the project Modelo de gestion para la integracion de la investigacion e innovacion responsable en las estructuras de investigacion sanitaria y biomedica de la Comunidad Valenciana (RI-SABIO) (grant number CIAICO/2023/163).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modeling human embryo adhesion using a microfluidic platform

  • Zaragozano, Sofía
  • Pardo-Figuerez, María
  • Monteagudo-Sánchez, Ana
  • Quirant, Anna
  • Moncayo-Arlandi, Javier
  • Gonzalez-Fernandez, Javier
  • Llera-Oyola, Jaime
  • Volkov, Petr
  • Maggi, Sara
  • Quintero, Luis
  • Raga, Fransciso
  • Grases, Pablo
  • Santamaría, Xavier
  • Moreno, Inmaculada
  • Plachta, Nicolas
  • Simon, Carlos
  • Vilella, Felipe
[EN] Embryo adhesion represents a critical step of implantation, yet understanding this process has been hindered by the lackof human in vitro platforms that replicate endometrial physiology. Here, we present a dual-channel microfluidic plat-form containing organoid-derived endometrial epithelium and primary stromal cells. Our model recapitulates impor-tant endometrial hallmarks including epithelial polarization, stromal decidualization, extracellular vesicle release,and hormone-induced receptivity. We validated the model using mouse embryos and human blastocysts, where weshowed that embryos displayed features of initial adhesion. These included establishment of embryo-epithelial con-tacts initiated via the polar trophectoderm, inner cell mass repositioning, and lineage reorganization. Moreover, humanembryos secreted ßhCG indicating a functional trophoblast. Thus, this work provides a platform to study key featuresof embryo adhesion and endometrial receptivity and disorders affecting embryo-endometrium interactions., This work was supported by the Carlos III Institute of Health grants PI21/00235 (I.M.), PI24/00722 (I.M.), PI21/00528 (F.V.), and PI24/01784 (A.M.-S. and F.V.); Spanish State Research Agency (AEI) grant CNS2022-135696 (F.V.); Conselleria de Innovacion, Universidad y Ciencia CIAICO 2022/242 (F.V.); European Commission Grant Agreement 101080219-2 (C.S. and F.V.); Torres Quevedo Grant PTQ2022-012376 (M.P.-F.); and Conselleria d Educació, cultura, universitats i ocupació CIGE 2023 (CIGE/2023/217) (A.M.S.), and CIAPOS 2024 (CIAPOS/2024/226) (A.M.-S.).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Environmentally sensitive fluorescence of the topical retinoid adapalene

  • Soler-Orenes, Juan A.
  • Monari, Antonio
  • Miranda, Miguel A.
  • Hernández-Gil, Javier
  • Lhiaubet, Virginie Lyria|||0000-0002-8205-8892
[EN] Intrinsic fluorescence of drugs brings valuable information on their localization in the organism and their interaction with key biomolecules. In this work, we investigate the absorption and emission properties of the topical retinoid adapalene in different solvents and biological media. While the UVA/UVB absorption band does not exhibit any significant solvent-dependent behavior, a strong positive solvatochromism is observed for the emission. These results are in line with molecular modeling and simulations that show the presence of two quasi-degenerate states, i.e., a local pi-pi* and an intermolecular charge-transfer (ICT) state. However, molecular modeling also revealed that, whatever the solvent, at the corresponding equilibrium geometry the lowest and emissive excited state is the local pi-pi*. Finally, the potential of adapalene to act as a biological probe is demonstrated using albumin, DNA and micelles., The author(s) declare that financial support was received for the research, authorship, and/or publication of this article. Financial support from the Spanish (project PID 2021-128348NB-I00 funded by MCIN/AEI/10.13039/501100011033/and FEDER a way of making Europe, and Severo Ochoa centre of excellence program CEX 2021-001230-S) and regional (CIAICO/2021/061) governments is acknowledged. AM also thanks ANR and CGI for their financial support of this work through Labex SEAM ANR 11 LABX 086, ANR 11 IDEX 05 02. The support of the IdEx Université Paris 2019 ANR-18-IDEX-0001. JS-O is also thankful to the Spanish Government for the predoctoral grant (PRE 2019-089665). JH-G thanks the support of the Maria Zambrano Program of Excellence within the framework of grants for talent retaining of the Universitat Politecnica de Valencia and the Spanish Ministry of Universities, funded by the European Union-Next Generation (UPV Contract C16684).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tuned flexibility with phenethyl esters plasticized polylactic acid

  • Gazquez-Navarro, Jose Javier
  • Dominici, Franco
  • Puglia, Debora
  • Torre, Luigi
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
[EN] This study explores improving polylactic acid (PLA) by incorporating phenethyl-based plasticizers. PLA is a biobased polymer that tends to be rigid and has limited flexibility. To address this, 20¿wt% phenethyl esters were added through extrusion and injection molding. These esters are formed by esterifying carboxylic acids of various chain lengths with phenol, and both reactants can be sourced from nature, making this a sustainable approach. Including phenethyl plasticizers greatly increased PLA¿s elongation at break from 3.4¿% to over 130¿%, though tensile strength fell from 70.5¿MPa to between 20 and 25¿MPa. This change was evident in the fracture surfaces, which showed signs of plastic deformation. Thermal and thermomechanical tests revealed a lower glass transition temperature, improving chain mobility and allowing PLA to become ductile at room temperature. Although initial thermal degradation began at a lower temperature, the maximum degradation temperature rose slightly, suggesting enhanced thermal stability due to possible antioxidant effects of the plasticizers. Regarding shape memory, phenethyl plasticizers improved the recovery rate of the samples, expanding potential applications. Overall, these findings demonstrate the effectiveness of phenethyl-based plasticizers in improving PLA¿s flexibility and shape memory behavior, making it a more versatile material., This research is a part of the grant PID2023 152869OB-C22, and the grant TED2021 131762A-I00, funded by MCIN/AEI/10.13039/ 501100011033 and by the European Union NextGenerationEU /PRTR. The authors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. Juan Ivorra-Martinez thanks Generalitat Valenciana - GVA for funding a postdoc position through the CIAPOS program co-funded by ESF Investing in your future, grant number CIAPOS/2023/362. Franco Dominici, Debora Puglia and Luigi Torre acknowledge University of Perugia and MUR for support within the project Vitality. This work has been funded by the European Union&#9472;NextGenerationEU under the Italian Ministry of University and Research (MUR) National Innovation Ecosystem grant ECS00000041&#9472;VITALITY. Microscopy Services at UPV are also acknowledged for their help in collecting and analyzing images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An empirical experiment of a usability requirements elicitation method to design GUIs based on interviews

  • Ormeño Ayala, Yeshica Isela
  • Panach Navarrete, Jose Ignacio
  • Pastor López, Oscar|||0000-0002-1320-8471
[EN] Context: The usability requirements elicitation process is a difficult task that lacks methods to guide and help analysts, who are usually not experts at usability. Objective: This paper conducts an experiment with two replications to evaluate a method that elicits usability requirements based on structured interviews named UREM versus an unstructured method. The method consists of guided interviews by the analyst using decision trees. The tree is composed of questions and possible answers. Each question appears when there are different possible design alternatives, and each answer represents one of these alternatives. The tree also recommends the alternative that enhances the usability based on existing us ability guidelines. Method: We have conducted an experiment with two replications with 22 and 26 subjects playing two different roles in a within-subjects design. The analysts used a tree to guide the interview and elicit the requirements while the end users had to explain to the analyst the type of system to develop. During the interview, the analyst must design a paper prototype to be validated by the end user. For the analyst, the experiment measures the effec tiveness of usability requirements elicitation, the effectiveness of the use of the usability guidelines, the efficiency of the elicitation process, and the satisfaction with the entire elicitation process. For the end user, the experiment measures the satisfaction with the designed prototype at the end of the interview. Results: UREM yielded significantly better results for the effectiveness in the usability requirements elicitation process and for the effectiveness in the use of usability guidelines when compared to unstructured interviews. The use of UREM did not reduce the analysts¿ efficiency and both analyst and end user remained the same satisfaction. Conclusions: Eliciting usability requirements is a difficult task if it is done with unstructured interviews and without usability recommendations, This work was developed with the support of the National University of San Antonio Abad of Cusco under the program Yachayninchis Winarinanpaq CONCYTEC and FONDECYT, the support of Generalitat Valenciana with CoMoDID (CIPROM/2021/023) and GENI (CIAICO/2022/229), as well as the support of the Spanish Ministry of Science and Innovation co-financed by FEDER in the project SREC (PID2021 123824OB-I00).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Synthesis of anodized WO3 nanocatalysts using Melia azedarach leaves extract for energetic applications [Dataset]

  • Fernández Domene, Ramón Manuel
  • Solsona Espriu, Benjamin Eduardo
  • Erans Moreno, María
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Sánchez Tovar, Rita
This study reports the bio-mediated synthesis of tungsten trioxide nanostructures from aqueous extracts of Melia azedarach (L.) dry leaves. The synthesis was carried out by electrochemical anodization of tungsten foils in the presence of different volume percentages of leaves extracts. These nanostructures were afterwards characterized by X-Ray Diffraction (XRD), impedance measurements and linear sweep voltammetry in the presence of simulated solar light. Finally, these nanoelectrodes were used as (photo)electrocatalysts in the photoelectrochemical water splitting process to obtain green hydrogen and as anodes in Li-ion rechargeable batteries. Description of methods used for collection/generation of data: - Synthesis of WO3 nanostructures: The leaves of M. azedarach were randomly sampled from several mature trees from the surroundings of the Burjassot Campus of the University of Valencia (Spain). Fresh leaves were rinsed with tap and distilled water and subsequently air-dried indoors for 1 week, at room temperature. The extracts were obtained from dried leaves, by mixing 15 g of material with 150 mL of distilled water at 60 ºC. The infusion was maintained at that temperature for 20 min. After that, the solution, once cooled, was filtered through filter paper and used to prepare the different reaction media. Nanostructures of WO3 were synthesized by subjecting tungsten foils (1,3 cm2 of exposed area) to an anodization process with a cell potential of 20 V, for 4 h. A platinum foil served as the cathode within the cell. The anodization process employed an aqueous electrolyte composed of 1.5 M methanesulfonic acid (MSA) with varying proportions of M. azedarach leaves extract (from 0% to 10%, in volume), at a temperature of 50◦C. Anodization was performed under controlled hydrodynamic conditions, by means of a Rotating Disk Electrode (RDE) set a constant rotation speed of 750 rpm. Following anodization, a thermal treatment (annealing) was carried out in a tubular oven at 600◦C for 4 h in an air atmosphere to obtain crystalline WO3 nanostructures. - Morphological and structural characterization: X-Ray diffraction analyses (XRD) were performed to investigate the crystallinity of the WO3 samples. A D8AVANCE diffractometer (Bruker) equipped with a monochromatic Cu Kα1 source was used. -(Photo)electrochemical characterization: impedance measurements and photocurrent density vs potential curves: Electrochemical characterization of the WO3 nanostructures was conducted through impedance measurements, performing Electrochemical Impedance Spectroscopy (EIS) and Mott-Schottky (MS) analyses. All electrochemical tests were carried out using a three-electrode cell with the nanostructures acting as working electrodes, a silver/silver chloride (3 M KCl) electrode was the reference electrode and a platinum tip served as counterelectrode. Measurements were performed with a PalmSens4 potentiostat and 0.1 M H2SO4 was used as electrolyte. The sample area exposed to that electrolyte was 0.5 cm2. For EIS, a constant potential of 1 V was selected with an amplitude of 10 mV, scanning the frequency from 100 kHz to 10 mHz. For MS analysis, a constant frequency of 5 kHz was used, while the potential was scanned from 1 V to 0.2 V at a rate of 50 mV/s. For the photoelectrochemical characterization of the WO3 nanostructures, the same experimental set-up was used, with the addition of a solar simulator with AM 1.5 conditions (100 mW/cm2). Linear voltammetries to obtain photocurrent density – potential curves were conducted from 0.2 V to 1.05 V, by applying dark-light pulses (16 s in the dark followed by 4 s with illumination) while the potential was scanned. - Evaluation of WO3 nanostructures as Li-ion battery anodes: WO3 nanostructures were evaluated as anodes (negative electrodes) for Li-ion batteries. For that purpose, Swagelok-type cells were used, with WO3 nanostructures acting as working electrodes and a metallic lithium foil acting as both the counter and the reference electrodes. Batteries were assembled inside an Ar-filled glove box, using 1 M LiPF6 in ethylene carbonate/dimethyl carbonate/diethyl carbonate 1:1:1 (v/ v/v) as electrolyte (Sigma-Aldrich) and a Whatman glass microfiber separator. After sealing the cells, they were cycled outside the glove box at room temperature, using a Biologic BCS-815 cyclic station. Galvanostatic charge/discharge curves were recorded at different cycling rates (from C/10–1 C, and returning to C/10) within a potential window between 1 V and 3.5 V vs Li/Li+.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sustainable Knoevenagel condensation of lignin-derived aldehydes over basic mesoporous silica

  • Brito, Julio Cesar Fernandes P.
  • Ancora, Gioele
  • Gianotti, Enrica
  • Díaz, Urbano|||0000-0003-1472-8724
  • Velty, Alexandra|||0000-0002-8263-4570
[EN] The sustainable valorization of biomass-derived molecules requires efficient, robust, and recyclable catalytic systems. In this study, amine-functionalised mesoporous silica nanoparticles (APTES@MSNs) were developed and investigated as heterogeneous base catalysts for the Knoevenagel condensation of lignin-derived aromatic aldehydes. Mesoporous silica nanoparticles were selected as supports due to their high surface area, ordered mesoporous structure, and tunable surface chemistry, enabling the stable grafting of organic functionalities. Postsynthetic functionalisation with (3-aminopropyl)triethoxysilane introduced accessible primary amine groups that act as basic catalytic sites, yielding a hybrid organic-inorganic material with high structural stability. The catalytic performance of APTES@MSNs was evaluated using vanillin, syringaldehyde, and 4-hydroxybenzaldehyde as representative bio-based substrates. Key reaction parameters, including solvent, temperature, and catalyst loading, were systematically examined to identify mild and environmentally benign operating conditions. The potential of amine-functionalised mesoporous silicas as sustainable heterogeneous catalysts is highlighted for the upgrading lignin-derived platform molecules within a circular chemistry framework., Dr. Gioele Ancora holds a PhD career grant supported by Next Generation EU - MUR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Real-time ultrasound shear wave elastography using a local phase gradient

  • González-Mateo, Enrique
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
  • Jimenez, Noe|||0000-0002-6539-670X
[EN] Background and Objective: Current approaches for ultrasound spectral elastography make use of block processing, resulting in long computational times. This work describes a real-time, robust, and quantitative imaging modality to map the elastic and viscoelastic properties of soft tissues using ultrasound. Methods: This elastographic technique relies on the spectral estimation of the shear-wave phase speed by combining a local phase-gradient method and angular filtering. We first apply directional filtering in the spatio-temporal frequency domain for providing one-way, smooth, and harmonic displacement maps in the frequency range of interest. Thanks to this, we can apply a simple, fast, and local phase gradient approach to obtain the axial and lateral components of the wavevector, which are linked to phase velocity and soft-tissue elasticity and viscoelasticity. The technique is validated numerically and experimentally using a 7.6 MHz ultrasound probe, tested in calibrated soft-tissue phantoms and ex vivo liver tissues. The method is compared with state-of-the-art spectral methods. Results: The technique significantly reduces the computation time, e.g., the reconstruction time for a 155 × 315-pixel phase-velocity map was 0.16 s, while local-phase velocity-imaging techniques was 156.73 s for 2D implementation and 13.56 s for the 1D version, a reduction between two and three orders of magnitude, while showing a similar accuracy and resolution than standard methods. Conclusions: This approach eliminates the need for block processing that may limit the spatial resolution and computational time of the velocity map. In this way, the phase gradient elastography method is revealed as an efficient and robust approach for real-time spectral elastography., This research has been supported by the Ministerio de Ciencia, Innovacion y Universidades, Spain and Agencia Estatal de Investigacion, Spain grants RYC2021-034920-I, PID2022-142719OB-C21, PID2019- 111436RB-C22 and CNS2023-145707 funded by MCIN/AEI/10.13039/501100011033; Agencia Valenciana de la Innovacio, Spain grants INNVA2/2022/11, INNVA1/2022/37, INNVA1/2020/92, and Generalitat Valenciana, Spain grants CIAICO/2023/052 and IDIFEDER/2021/004.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development and Characterization of Ductile Polylactic Acid Blends with Plasticized Zein for Injection Molding Applications

  • Lázaro-Hernández, C.|||0009-0002-8250-9363
  • Mario Nicolás
  • Vicente-Vinas, Maria del Puig|||0009-0005-0024-1503
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
[EN] This study explores the development of polylactic acid (PLA) blends incorporating plasticized zein, a corn-derived protein, and dipropylene glycol (DPG) as a biobased plasticizer to enhance compatibility and processability. Blends were produced via twin-screw extrusion and injection molding, with plasticized zein content ranging from 10 to 50 wt%. Mechanical testing showed a significant increase in ductility, with elongation at break rising from 6.3% (neat PLA) to 56.3% (50 wt% zein), accompanied by reduced tensile strength (58.4 MPa to 22.7 MPa) and impact resistance (42.2 kJ/m2 to 11.5 kJ/m2), due to phase separation and limited compatibility. Shore D hardness slightly declined (from 82.9 to 77.4). Thermal analysis revealed the Tg decreasing from 59.5 °C to 39.9 °C as zein content increased. Thermogravimetric analysis showed reduced thermal stability with zein addition, dropping the initial degradation temperature from 360.0 °C to 188.2 °C. Morphological analysis indicated greater heterogeneity at higher zein levels due to partial miscibility. Colorimetric data showed visible changes, and FTIR spectra confirmed physical interactions and partial miscibility between PLA and zein., This research is a part of the grant PID2023-152869OB-C22, and the grant TED2021-131762 A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. The authors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. C. Lazaro-Hdez thanks Generalitat Valenciana - GVA for funding a predoc position through the CIACIF program co-funded by ESF Investing in your future, grant number CIACIF/2023/244. M. Miranda-Pinzon thanks Vice-rectorate for Research of the Universitat Politècnica de València (UPV) for funding a predoctoral contract in the PAID-01-24 program. J. IvorraMartinez thanks Generalitat Valenciana - GVA for funding a postdoc position through the CIAPOS program co-funded by ESF Investing in your future, grant number CIAPOS/2023/362. Microscopy services at UPV are also acknowledged for their help in collecting and analyzing FESEM images. Funding for open access charge: CRUE-Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Stability of a reactor with Niederlinski criterion using RGA matrices

  • Boix García, Macarena|||0000-0003-2046-6732
  • Cantó Colomina, Begoña|||0000-0002-9837-3926
  • Gasso Matoses, María Teresa
[EN] This paper considers a distillation column used in heavy crude oil separation where pairings exhibit negative Niederlinski Index values, potentially leading to system instability. In this study, we address this issue by constructing a Relative Gain Array matrix from a transfer matrix of order 3. We employ mathematical techniques to steer the system towards stability. Through subtle modifications to matrix entries, we achieve stable configurations., This research was partially supported by Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital de la Generalitat Valenciana under Spanish grant CIAICO/2021/162.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Conflict and Transformation: Historic Perspectives of Architectural Heritage in Achuar Communities (Ecuador)

  • Morocho-Jaramillo, David Eduardo|||0000-0002-5974-937X
  • Mileto, Camilla|||0000-0002-6987-8802
  • Sandoval-Gómez, Francisco
[EN] This article analyses the architectural elements and constructive techniques of the vernacular architecture of the Achuar people, focusing on the physical components of dwellings in response to social and cultural dynamics. A methodological approach based on source triangulation has enabled the comparison of 16th-century cartographic representations, 20th-century ethnographic records, and modern-day observations to evaluate the evolution and survival of tangible spatial and morphological representations characteristic of the Amazonia. The study covers topics ranging from the way in which these structures were documented and represented in early encounters with the Europeans and the Tupinambás, who created new forms of spatial negotiation, to the identification of the main architectural components which have survived, considering both their material dimension and cultural value. This article has contributed to a deeper understanding of architecture as an expression of different ways of life in constant transformation, highlighting the ontological differences between European territorial design and the original peoples., This research was funded by the Universitat Politècnica de València under grant FPI-UPV (PAID-01-21), and is part of the research project “RE-HABITAT—Restauración y rehabilitación sostenible de viviendas tradicionales en contextos históricos” funded by the R&D&i programme of the Department for Innovation, Universities, Science and Digital Society of the Generalitat Valenciana (CIAICO/2022/035).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Memristive switching of nanofluidic diodes by ionic concentration gradients

  • Ramirez Hoyos, Patricio|||0000-0002-0067-4887
  • Cervera, Javier
  • Nasir, Saima
  • Ali, Mubarak
  • Ensinger, Wolfgang
  • Mafé, Salvador
[EN] We demonstrate that nanofluidic diodes exhibit a memristive behavior that can be controlled not only by the amplitude and frequency of the driving oscillatory signal but also by changing the relative orientations of the externally imposed ionic concentration difference with respect to the pore charge density gradient. Because ionic concentration differences, memristive properties, and nanofluidic pores are of broad interest to electrochemical technology and membrane bioelectrochemistry, this study can be a useful contribution to the field. In our case, the memristor is a polymer membrane with current rectifying conical nanopores. The electrical interaction between the mobile ions in the aqueous solution and the pore surface charges leads to rich physico-chemical phenomena, including memory effects and the neuromorphic-like potentiation of the membrane conductance following voltage pulses (spikes). The multipore membrane can be used in the design of electrochemical circuits for signal conversion and information processing in iontronic hybrid devices, P.R., J.C., and S.M. acknowledge the support from the Conselleria dEducacio, Universitats i Ocupacio (Generalitat Valenciana), project CIAICO2022-247. S. N., M. A., and and W. E. acknowledge the funding from the Hessen State Ministry of Higher Education, Research and the Arts, Germany, under the LOEWE project iNAPO.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The range of combined matrices and doubly quasi-stochastic matrices of order 3

  • Boix García, Macarena|||0000-0003-2046-6732
  • Cantó Colomina, Begoña|||0000-0002-9837-3926
  • Cantó Colomina, Rafael|||0000-0002-1341-2800
  • Urbano Salvador, Ana María|||0000-0001-8590-1243
[EN] The combined matrix of a nonsingular matrix A is the matrix C(A)=A¿A^{¿t}, where ¿means the Hadamard (entrywise) product. Since the sum of the entries of each row and each column of C(A) is one, when the combined matrix is a real matrix, it is a doubly quasi-stochastic matrix. In this work, doubly quasi-stochastic combined matrices are studied. The characterization of all real matrices such that their combined matrix is doubly quasi-stochastic of order 3 is obtained, and the study of the class of totally positive matrices is given., This research was partially supported by Consellería de Innovación, Universidades, Ciencia y Sociedad Digital de la Generalitat Valenciana under Spanish grant CIAICO/2021/162.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Explorando el impacto de la reflexión cognitiva y la calibración sobre tareas creativas científicas en la educación secundaria, Exploring the impact of cognitive reflection and calibration on scientific creative tasks in secondary education

  • Cifre-Herrando, Mireia|||0000-0002-8800-3585
  • Solaz-Portolés, Joan J.
  • Sanjosé López, Vicente
[ES] ada la relevancia de la creatividad en educación y su relación con las estrategias metacognitivas, este estudio evaluó la creatividad científica convergente (CCC) y analizó la influencia de la calibración, la reflexión cognitiva, el nivel académico y el género. Se llevó a cabo una investigación cuantitativa transversal ex post facto con 153 estudiantes (86 chicos y 67 chicas) de tres cursos de educación secundaria en España. Se administraron tres instrumentos: una prueba de CCC (2 ítems), una prueba de calibración (2 ítems) y una prueba de reflexión cognitiva (8 ítems). Los resultados mostraron puntuaciones bajas en CCC. La CCC se correlacionó de forma significativa y positiva únicamente con la calibración y la reflexión cognitiva. El análisis de regresión identificó la calibración como el único predictor significativo de la CCC. Asimismo, el análisis de mediación indicó que la calibración medió la relación entre la reflexión cognitiva y la CCC. En conjunto, los hallazgos sugieren que el nivel académico tuvo un efecto limitado sobre la CCC, que la calibración fue la variable con mayor influencia, y que la reflexión cognitiva ejerció un efecto indirecto significativo sobre la CCC a través de la calibración., [EN] Given the importance of creativity in education and its links to metacognitive strategies, this study assessed convergent scientific creativity (CSC) and examined the influence of calibration, cognitive reflection, grade level, and gender. A quantitative, ex post facto, cross-sectional design was used with 153 Spanish secondary school students (86 boys and 67 girls) from three grade levels. Participants completed three instruments: a two-item CSC test, a two-item calibration test, and an eight-item cognitive reflection test. CSC scores were low. CSC correlated significantly and positively only with calibration and cognitive reflection. Regression analysis identified calibration as the only significant predictor of CSC. Mediation analysis further showed that calibration mediated the relationship between cognitive reflection and CSC. Overall, findings indicate that grade level had little effect on CSC, calibration exerted the strongest influence, and cognitive reflection had a significant indirect effect on CSC through calibration., Esta investigación ha sido financiada por MCIN/AEI/ 10.13039/501100011033 y por la subvención FEDER A way of making Europe número PID2021-124333NB-I00, y por la Generalitat Valenciana (Consellería de Innovación, Universidades y Empleo) subvención CIAICO/2022/228.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Exposure to social media pro-environmental campaigns and its impact on Generation Z&apos, s commitment to environmental sustainability actions

  • Peiró Signes, Angel|||0000-0002-1549-6972
  • Biondo, Adriano
  • Sakka, Georgia
  • Borsellino, Valeria
  • Galati, Antonino
[EN] The potential of social media to affect people's adoption of more responsible and sustainable behaviours has attracted growing interest from researchers. Few studies examined the influence of social media on Generation Z, the generation with the highest level of daily use of digital platforms. This study explores the influence of Gen Z's exposure to pro-environmental social media campaigns on the adoption of responsible and sustainable behaviours, and the role of environmental knowledge. Data were collected from 332 Generation Z youth in Italy and analysed with PLS-SEM and fsQCA. The results show that social media engagement significantly affects the environmental commitment of Generation Zers, especially when this behaviour is interpreted as a sense of care and responsibility, highlighting their role in promoting environmental awareness. Furthermore, knowledge of environmental issues emerges as an important mediator between the use of social media and the adoption of pro-environmental behaviours. Therefore, exposure to social media campaigns aimed at raising awareness and increasing young people's sense of responsibility leads to their intention to be involved in solving environmental issues, especially among those with a high level of environmental education and knowledge., The authors acknowledge the financial support from Generalitat Valenciana through the project CoopInn (CIAICO/2023/228).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

AI adoption in Spain (2023-2025): A web-derived dataset based on LLMs

  • Pastor-Merino, Ana
  • Martínez-Barbero, Xavier|||0000-0002-6040-8118
  • Domenech, Josep|||0000-0002-7302-5810
[EN] This article introduces a nationwide dataset that maps how 112,814 Spanish firms communicate and implement artificial intelligence (AI) on their corporate websites in 2023 and 2025, resulting in 225,628 firm-year observations. Using a systemic pipeline based on large language models (LLMs), website text is segmented, semantically filtered, and evaluated with a structured rubric to identify explicit evidence of AI use in internal processes and in products or services. The dataset offers a detailed portrait of AI adoption across regions (NUTS 3), industries, and firm size categories. For each province-sector-size combination, it reports whether firms adopt AI, whether they apply it internally, whether it is embedded in their offerings, and how many firms have valid website content. This multi-dimensional structure enables users to explore territorial patterns, sectoral differences, and size-related disparities in the uptake of AI. By providing indicators for two benchmark years, the dataset supports the study of how AI adoption evolves across the Spanish business landscape. It offers a reproducible and scalable foundation for research on technological diffusion, regional digitalisation, and industry-level transformation, and can be readily extended to future years or adapted to other countries., This work was supported by the Generalitat Valenciana, Spain under Grant CIAICO/2023/272; the Agencia Estatal de Investigacion, Spain (MCIN/AEI/10.13039/501 100 011 033 ) and ERDF/EU under Grant PID2023-152106OB-I00; and FPU24/01116, Ministerio de Ciencia e Innovacion (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Selective lignin conversion via flow photocatalysis for vanillin and bioplasticizers production

  • Marset, Xavier
  • Montilla-Verdú, Salvador
  • Pastor, Francisco J.
  • Rico, Elio
  • Bertella, Stefania
  • Ortuño, Manuel A.
  • Aschauer, Ulrich
  • Guijarro, Néstor
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Mario Nicolás
  • Lázaro-Hernández, C.|||0009-0002-8250-9363
  • Balart, Rafael|||0000-0001-5670-7126
[EN] Lignin valorization remains a roadblock in the development of green biorefineries. Currently, depolymerization strategies predominantly depend on energy- and resource-intensive thermochemical methods, while potential applications of the resulting bio-based products are often overlooked. Here, we show a scalable photocatalytic flow reactor for lignin deconstruction that operates at ambient conditions, along with a downstream process that yields commercially viable products at gram scale. An anthraquinone-based photocatalytic platform, when packed in a flow bed reactor, is demonstrated to selectively and nearly quantitatively cleave lignin¿s ß-O-4 moieties, achieving a benchmark yield of 7.1¿wt% for vanillin. The utilization of residual oligomers as plasticizers for biobased polylactic acid resulted in improved mechanical properties and shape memory effects, while maintaining its suitability for conventional 3D printing. This aldehyde-oriented platform represents a key advancement that complements existing ketone-oriented photocatalytic approaches targeting valuable chemicals from lignin conversion, and it ultimately contributes to the holistic utilization of lignin., This research is a part of the grant PID2023-152869OB-C22, and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. The authors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. J. G.-C. wants to thank FPU20/01732 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. M.M.-P. thanks Vice-rectorate for Research of the Universitat Politècnica de València (UPV) for funding a predoctoral contract in the PAID-01-24 program. M.A.O. thanks the Ramon y Cajal Program (RYC2022-035453-I) funded by MICIU/AEI/10.13039/501100011033 and FSE&#8201;+&#8201;. C.L.-H. wants to thank CIACIF/2023/244 grant funded by Generalitat Valenciana GVA. U.A thanks the supercomputer resources provided by the Vienna Scientific Cluster (VSC). N.G. thanks the Ramon y Cajal Program (RYC2018-023888-I) funded by MCIN/AEI/ 10.13039/501100011033. The authors also thank the support of the Generalitat Valenciana/FEDER (Spain) through the project IDIFEDER/2020/002. This research is also part of the project PID2021-128805NA-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. This project has received funding from the European Research Council (ERC) under the European Union s Horizon 2020 research and innovation programme (grant agreement no. 948829).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Plasma fibroblast activation protein is decreased in acute heart failure despite cardiac tissue upregulation

  • Delgado-Arija, Marta
  • Genovés, Patricia
  • Pérez-Carrillo, Lorena
  • González-Torrent, Irene
  • Giménez-Escamilla, Isaac
  • Martínez-Dolz, Luis
  • Portolés, Manuel
  • Tarazón, Estefanía
  • Roselló-Lletí, Esther
[EN] Background Cardiac fibroblast activation protein (FAP) has an emerging role in heart failure (HF). A paradoxical reduction in its levels in pathological conditions associated with acute processes has been observed. We aimed to identify FAP cardiac tissue expression and its relationship with the main cardiac fibrosis-related signaling pathways, and to compare plasma FAP levels in acute and chronic HF patients. Methods Transcriptomic changes were assessed via mRNA/ncRNA-seq in left ventricle tissue from HF patients (n¿=¿57) and controls (n¿=¿10). Western blotting and immunohistochemistry were used to explore FAP protein levels and localization in cardiac tissue. ELISA was performed to examine plasma FAP levels in acute HF (n¿=¿48), chronic HF (n¿=¿15) and control samples (n¿=¿7). Results FAP overexpression in cardiac tissue is related to the expression of molecules directly involved in cardiac fibrosis, such as POSTN, THBS4, MFAP5, COL1A2 and COL3A1 (P¿<¿0.001), and is directly and inversely related to pro- and antifibrotic microRNAs, respectively. The observed FAP overexpression is not reflected in plasma. Circulating FAP levels were lower in acute HF patients than in controls (P¿<¿0.05), while chronic HF patients did not show significant changes. The clinical variables analyzed, such as functional class or etiology, do not affect plasma FAP concentrations. Conclusions We determined that in HF cardiac tissue, FAP is related to the main cardiac fibrosis signaling pathways as well as to pro- and antifibrotic microRNAs. Additionally, an acute phase of HF decreases plasma FAP levels despite the upregulation observed in cardiac tissue and regardless of other clinical conditions., This work was supported by the National Institute of Health Fondo de Investigaciones Sanitarias del Instituto de Salud Carlos III [Projects: PI20/01469 and PI20/00071 co-funded by European Union; Miguel Servet contracts: CP18/00145 co-funded by European Union, European Social Fund (ESF) The ESF invests in your future and CP21/00041 co-funded by European Union; contract FI21/00186 and FI21/00034]; Consorcio Centro de Investi&#8209; gación Biomédica en Red [CIBERCV, under Grant CB16/11/00261]; Ministry of Universities and the European Recovery, Transformation and Resilience Plan (PRTR, Next Generation EU) [ Ayuda Margarita Salas para la formación de jóvenes doctores : contract: MS21-162]; Ministry of Science and Innovation (MCIN, 10.13039/501100011033) and State Investigation Agency (AEI) [Project CNS2022-135769] co-funded by European Union Next Generation EU and PRTR; Conselleria de educación, universidades y empleo [Project CIA&#8209; ICO/2022/246, contract CIACIF/2022/429].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Uncovering Companies Missing from the SABI Database: A Web Scraping Approach

  • Xin-Hui Huang
  • Domenech, Josep|||0000-0002-7302-5810
[EN] This study evaluates the completeness and representativeness of the SABI database, a widely used commercial source for firm-level data in Spain and Portugal, by comparing it to BORME, the official Spanish business register. Using web scraping techniques, we collected and processed approximately 100,000 BORME publications in PDF format, covering the period from 2010 to 2023. These were transformed into a structured dataset comprising over 1.2 million companies, which we then matched against SABI records from the same period. Our analysis reveals that SABI covers only 38.3\% of newly established companies, with significant underrepresentation of younger firms, small enterprises, specific sectors, and certain regions. Furthermore, we find clear evidence of survivorship bias: the longer a company has been dissolved, the less likely it is to appear in SABI. Sectoral and geographic disparities are also substantial, and the coverage is skewed toward firms with higher initial capital and specific legal forms. These findings suggest that SABI represents a non-random subset of the Spanish business population, and caution should be exercised when using it for empirical research. Adjustments for sample bias are recommended to improve the reliability of analyses based on this database., This work was partially supported by Grant PID2023-152106OB-I00 funded by MICIU/AEI/ 10.13039/501100011033 and by ERDF/EU; Grant CIAICO/2023/272 funded by Generalitat Valenciana; and by Ministerio de Educación y Formación Profesional.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Broad-spectrum antiviral ferruginol analog affects the viral proteins translation and actin remodeling during dengue virus infection

  • Roa-Linares, Vicky C.
  • Betancur-Galvis, Liliana A.
  • Garcia-Blanco, Mariano A.
  • Gallego-Gomez, Juan C.
  • González-Cardenete, Miguel A|||0000-0002-8762-0426
[EN] Dengue virus infection is the most important arbovirosis around the world. To date, no antiviral drugs have been approved for its treatment. Host-targeted antivirals (HTA) have emerged as a promising strategy, because of their high barrier to resistance. Using plaque-forming unit assays, molecular docking, fluorescence microscopy, image analysis, and molecular/cellular assays, it was found that 18-(phthalimide-2-yl)-ferruginol, a semi-synthetic analog of the bioactive diterpenoid ferruginol, couples with high affinity to RhoA GTPase. In addition, this molecule dramatically reduced actin filament formation and induced cellular morphological changes, when added to cell cultures before or after infection, without effect on microtubules or intermediate filaments. RhoA activation in infected cells was affected when the compound was added after 6 h.p.i. Furthermore, this compound decreased dengue virus-2 (DENV-2) E protein, NS3 protein, and dsRNA as measured by fluorescence microscopy, and changes in the distribution pattern of these viral components. 18-(phthalimide-2-yl)-ferruginol treatment at 6 and 12 h.p.i. reduces the virus yield. Western blot and RT-qPCR assays reveal that this analog decreased viral protein translation. Flow cytometry and wound-healing experiments also hint that cellular effects prompted for this compound do not relate to early apoptotic events and they could be reversible. Overall, our findings strongly suggest that 18-(phthalimide-2-yl)-ferruginol has an HTA mechanism, possibly disrupting the polyprotein translation of DENV-2 via alteration of RhoA-mediated actin remodeling and other related cellular and viral processes., VCR-L acknowledges Institutional funding from CODI (Comitepara el Desarrollo de la Investigacion-Universidad de Antioquia, grant code 2014-1041) and to Alejandro Elejalde for graphic design support. This research was supported by the regional government "Generalitat Valenciana, Conselleria de Educacion, Universidades y Empleo", grant number CIAICO/2022/220 and the Universitat Politecnica de Valencia under a cooperation "ADSIDEO" research grant (AD1902). Financial support by the Spanish Ministry of Science and Innovation (CEX2021- 001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. JCG-G acknowledges to Universidad de Antioquia Full-Professor position (Vice-Rectorate of Teaching, Resolution # 16235). MAG-B acknowledges start-up funds from the University of Texas Medical Branch.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

SUMOylation modulates eIF5A activities in both yeast and pancreatic ductal adenocarcinoma cells

  • Seoane, Rocío
  • Lama-Díaz, Tomás
  • Romero, Antonia María
  • El Motiam, Ahmed
  • Vidal, Santiago
  • Bouzaher, Yanis H.
  • Blanquer, María
  • Tolosa, Rocío M.
  • Castillo Mewa, Juan
  • Rodríguez, Manuel S.
  • García-Sastre, Adolfo
  • Xirodimas, Dimitris
  • Sutherland, James D.
  • Barrio, Rosa
  • Alepuz, Paula
  • Blanco, Miguel G.
  • Farràs, Rosa
  • Rivas, Carmen
  • Martínez-Férriz, Arantxa|||0000-0001-7193-2575
[EN] BackgroundThe eukaryotic translation initiation protein eIF5A is a highly conserved and essential factor that plays a critical role in different physiological and pathological processes including stress response and cancer. Different proteomic studies suggest that eIF5A may be a small ubiquitin-like modifier (SUMO) substrate, but whether eIF5A is indeed SUMOylated and how relevant is this modification for eIF5A activities are still unknown.MethodsSUMOylation was evaluated using in vitro SUMOylation assays, Histidine-tagged proteins purification from His6-SUMO2 transfected cells, and isolation of endogenously SUMOylated proteins using SUMO-binding entities (SUBES). Mutants were engineered by site-directed mutagenesis. Protein stability was measured by a cycloheximide chase assay. Protein localization was determined using immunofluorescence and cellular fractionation assays. The ability of eIF5A1 constructs to complement the growth of Saccharomyces cerevisiae strains harboring thermosensitive mutants of a yeast EIF5A homolog gene (HYP2) was analyzed. The polysome profile and the formation of stress granules in cells expressing Pab1-GFP (a stress granule marker) by immunofluorescence were determined in yeast cells subjected to heat shock. Cell growth and migration of pancreatic ductal adenocarcinoma PANC-1 cells overexpressing different eIF5A1 constructs were evaluated using crystal violet staining and transwell inserts, respectively. Statistical analysis was performed with GraphPad Software, using unpaired Student's t-test, or one-way or two-way analysis of variance (ANOVA).ResultsWe found that eIF5A is modified by SUMO2 in vitro, in transfected cells and under endogenous conditions, revealing its physiological relevance. We identified several SUMO sites in eIF5A and found that SUMOylation modulates both the stability and the localization of eIF5A in mammalian cells. Interestingly, the SUMOylation of eIF5A responds to specific stresses, indicating that it is a regulated process. SUMOylation of eIF5A is conserved in yeast, the eIF5A SUMOylation mutants are unable to completely suppress the defects of HYP2 mutants, and SUMOylation of eIF5A is important for both stress granules formation and disassembly of polysomes induced by heat-shock. Moreover, mutation of the SUMOylation sites in eIF5A abolishes its promigratory and proproliferative activities in PANC-1 cells.ConclusionsSUMO2 conjugation to eIF5A is a stress-induced response implicated in the adaptation of yeast cells to heat-shock stress and required to promote the growth and migration of pancreatic ductal adenocarcinoma cells., Open Access funding was provided thanks to the CRUE-CSIC agreement with Springer Nature. Funding at the laboratory of CR is provided by the Ministry of Science, Innovation and Universities and FEDER (BFU-2017-88880-P, PID2021-126510NBI00), and by the Xunta de Galicia (ED431G 2023/10). RS, SV and TLD are predoctoral fellows funded by the Xunta de Galicia – Consellería de Cultura, Educación y Ordenación Universitaria (ED481A-2020/160, ED481A-2018/110, and ED481A-2018/042, respectively). AMR is a postdoctoral fellow funded by the Generalitat Valenciana (CIAPOS2021/117). MB is a predoctoral fellow funded by Banco Santander and the University of Santiago de Compostela. RMT is a predoctoral fellow funded by the Instituto de Investigación Sanitaria de Santiago de Compostela. The Blanco lab is supported by MCIN/AEI/https://doi.org/10.13039/501100011033 (PID2020-115472GB-I00) and by the Xunta de Galicia/FEDER – Una manera de hacer Europa (ED431C 2019/013). The RF lab is supported by the Fondo de Investigación Sanitaria, ISCIII (PI20-00194). The PA lab is supported by MCIN/AEI/https://doi.org/10.13039/501100011033 (PID2020-120066RB-I00) and by GVA CIAICO/2022/237. AMF is a predoctoral fellow funded by the Asociación Española Contra el Cáncer (AECC APRO 2018). RB and JDS thank MCIN/AEI/https://doi.org/10.13039/501100011033 (PID2020-114178GB-I00, CEX2021-001136-S). Finally, CR, RF and RB acknowledge support from SAF2017-90900-REDT (UBIRed Program, Spain) and COST Action ProteoCure CA20113.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of Negative Differential Resistance in Asymmetric Nanopores Obtained from Two Soluble Electrolytes

  • Ramirez Hoyos, Patricio|||0000-0002-0067-4887
  • Portillo, Sergio
  • Mafe, Salvador
  • Siwy, Zuzanna S.
  • Cervera, Javier
[EN] Negative differential resistance (NDR) phenomena in nanofluidic diodes are characterized by a decrease in the electrical current with the increase in the transmembrane potential beyond a system-dependent threshold voltage. Here, we describe the NDR due to a nanoscale salt precipitation that occurs in a conical nanopore in contact with two highly soluble salts in the external solutions. The new experimental design permits tunable and reproducible NDR effects that can be characterized from the I¿V curves for different pairs of soluble salts reacting at the pore tip to form the salt precipitate. The effects of pH and salt concentration on the precipitation, together with the use of electrolytes with different temperature-dependent solubilities, provide a complete description of the chemical NDR mechanism. In addition, the good reproducibility and stability observed over different voltage cycles suggest that the threshold potential needed for precipitation can be used for Ca2+ sensing in the range 1¿1000 mM., S.P., J.C., S.M., and P.R. acknowledge the support from the Conselleria d'Educacio, Universitats i Ocupacio (Generalitat Valenciana), Project No. CIAICO2022-247. Z.S.S. was supported by the National Science Foundation CBET-2408924. We thank Dr. Saima Nasir and Dr. Mubarak Ali for preparing the membrane samples and Professor Wolfgang Ensinger for his assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effects of Thermal Annealing on the Structure Properties Relationship of Plasticized Polylactic Acid with Citrates

  • Lázaro-Hernández, C.|||0009-0002-8250-9363
  • Mario Nicolás
  • Balart, Rafael|||0000-0001-5670-7126
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
[EN] This study investigates the effect of annealing on neat polylactic acid (PLA) and PLA plasticized with 20 wt% triethyl citrate (TEC) and acetyl tributyl citrate (ATBC), processed by twin-screw extrusion followed by injection molding. Two annealing treatments were applied at a lower temperature (T1-located at 10% above the onset of cold crystallization) and a higher temperature (T2- located at 10% below the endset of cold crystallization). The employed temperatures were provided by a calorimetric pre-study to assess the crystallization behavior. Mechanical characterization showed that annealing increased stiffness and brittleness, as indicated by a reduction in elongation at break from 276.7% (T0-without annealing treatment) to 53.7% (T2) for plasticized PLA with 20 wt% TEC, and an increase in tensile strength from 17.3 MPa (T0) to 25.1 MPa (T2). Charpy impact testing revealed higher energy absorption in T1, while surface hardness improved after annealing, with Shore D values for PLA increasing from 78.2 (T0) to 82.0 (T1). Thermal analysis demonstrated that annealing suppressed cold crystallization and substantially increased crystallinity, in PLA plasticized with 20 wt% ATBC rising from 34.1% (T0) to 65.3% (T2), without significantly affecting thermal stability. Plasticization reduced the glass transition temperature, although annealing partially restored rigidity. X-ray diffraction confirmed the higher crystalline order, and colorimetric evaluation showed perceptible changes in brightness and tone. Scanning electron microscopy revealed rougher fracture surfaces in annealed samples, which suggests a possible relationship with greater degree of crystallinity. Gel permeation chromatography indicated slight molecular weight degradation in neat PLA, whereas plasticized formulations remained stable., This research is a part of the grant PID2023-152869OBC22, and the grant TED2021-131762 A-I00, funded by MCIN/AEI/ https://doi.org/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. The authors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. C. Lazaro-Hdez thanks Generalitat Valenciana - GVA for funding a predoc position through the CIACIF program co-funded by ESF Investing in your future, grant number CIACIF/2023/244. M. Miranda-Pinzon thanks Vice-rectorate for Research of the Universitat Politècnica de València (UPV) for funding a predoctoral contract in the PAID-01-24 program. J. Ivorra-Martinez thanks Generalitat Valenciana - GVA for funding a postdoc position through the CIAPOS program co-funded by ESF Investing in your future, grant number CIAPOS/2023/362. Funding for open access charge: Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Chamber-Specific Structural, Fibrotic, and Molecular Remodeling of the Heart in Experimental Metabolic Syndrome

  • Arias-Mutis, Oscar J.
  • Bizy, Alexandra
  • Genoves, Patricia
  • Ortiz-Guzman, Johan E.
  • Lucia-Garcia, Antonio
  • Ruiz-Sauri, Amparo
  • Rios-Navarro, César
  • Such-Miquel, Luis
  • Alberola, Antonio
  • Chorro, Francisco J.
  • Zarzoso, Manuel
  • Calvo Saiz, Conrado Javier
[EN] Metabolic syndrome (MetS) drives cardiac remodeling and fibrosis, contributing to diastolic dysfunction and heart failure with preserved ejection fraction, but chamber-specific mechanisms remain poorly defined. New Zealand White rabbits were fed a high-fat/high-sucrose diet for 28 weeks to induce experimental MetS. Systemic phenotype, cardiac structure (echocardiography), myocardial fibrosis (Picrosirius red histology), myosin/collagen gene expression (qRT-PCR), and chamber-specific proteomics were assessed across left/right atria and ventricles. The model reproduced central obesity, glucose intolerance, dyslipidemia, and mild hypertension, with concentric left ventricular hypertrophy and selective ventricular fibrosis, as follows: increased collagen in left ventricle (LV) and right ventricle (RV), unchanged in atria. Ventricular alpha-myosin heavy-chain gene expression was upregulated, while collagen I and alpha-smooth muscle actin transcripts showed ventricular-specific downregulation. Proteomics revealed atrial metabolic and cytoskeletal adaptations with minimal extracellular matrix involvement; ventricles displayed early profibrotic cues (galectin-3 in LV), metabolic inefficiency (impaired glycolysis/ATP production in LV; lipid oxidation shift in RV), and diminished provisional matrix support. Conclusions: concentric LV hypertrophy and great vessel enlargement occurred without systolic/diastolic dysfunction; ventricular-selective fibrosis, alpha-myosin heavy-chain upregulation, type I collagen/alpha-smooth muscle actin downregulation, and chamber-specific proteomic changes showed atrial adaptation versus ventricular early profibrotic/metabolic inefficiency., This research was funded by Generalitat Valenciana (GV2015-062 and CIAICO/2023/013) to M.Z. and Instituto de Salud Carlos III (CB16/11/00486, PI21/01984) to F.J.C. and M.Z.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Effects of Polypropylene Fibres on the Shear Behaviour of a Concrete Crack: An Experimental Study

  • Ortiz-Navas, Francisco Roberto
  • Navarro-Gregori, Juan|||0000-0002-6319-7029
  • Serna Ros, Pedro|||0000-0001-8754-1165
[EN] Highlights What are the main findings? Increasing the polypropylene fiber content from 8 kg/m3 to 12 kg/m3 significantly enhances both post-cracking flexural and shear strength. Larger initial crack openings reduce shear transfer efficiency, highlighting the critical role of fibers in maintaining stress transmission across cracks. What is the implication of the main findings? Polypropylene macro-fibers with properties equivalent to those used in this study (at doses above 8 kg/m3) show strong potential to improve shear performance in structural applications. The established correlations between normal and shear stresses, slip, and crack width provide a solid foundation for constitutive modeling of cracks in polypropylene fiber-reinforced concrete.Highlights What are the main findings? Increasing the polypropylene fiber content from 8 kg/m3 to 12 kg/m3 significantly enhances both post-cracking flexural and shear strength. Larger initial crack openings reduce shear transfer efficiency, highlighting the critical role of fibers in maintaining stress transmission across cracks. What is the implication of the main findings? Polypropylene macro-fibers with properties equivalent to those used in this study (at doses above 8 kg/m3) show strong potential to improve shear performance in structural applications. The established correlations between normal and shear stresses, slip, and crack width provide a solid foundation for constitutive modeling of cracks in polypropylene fiber-reinforced concrete.Abstract The objective of this study is to investigate the effects of macrosynthetic polypropylene fibres as shear reinforcement in a concrete crack. An experimental study was conducted using twenty push-off specimens with varying volumes of fibres, along with plain concrete specimens as a reference. The testing methodology allowed for the analysis of crack kinematics by measuring the evolution of normal and shear stresses in relation to slip and crack opening. This facilitated the creation of diagrams similar to those presented by Walraven (1980) for crack interface shear transfer, but in this case, applied to concrete reinforced with macrosynthetic polypropylene fibres. The findings demonstrate that macrosynthetic polypropylene fibres significantly enhance shear behaviour, particularly when their volume exceeds 8 kg/m3. This study provides valuable insights into the behaviour of macrosynthetic polypropylene fibres under shear loading conditions and highlights their potential benefits as effective shear reinforcement., This work is part of the project "CIAICO/2022/045" and has received support from the "Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital, Generalitat Valenciana (ES)".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Model-Driven Development of Web Augmenters for Facilitating Environmental Open Data Consumption

  • González-Martínez, Paula
  • González-Mora, Cesar
  • Garrigós, Irene
  • Mazón, Jose-Norberto
  • Cecilia-Canales, José María|||0000-0001-5648-214X
[EN] Citizens must consume open data published by public institutions to be aware of environmental issues of SDGs (Sustainable Development Goals). However, the existence of many related heterogeneous open data sets hampers citizens to access and consume them to raise environmental awareness. To overcome this scenario, in this paper, we introduce a model-driven development approach to automatically generate maps as web augmenters to allow citizens to surf the Web while they 1) homogeneously access environmental open data, and 2) easily visualize this data on the map. To show the feasibility of our approach, we focus on a case study of biodiversity maps, which are related to SDG 14 (life below water), and 15 (life on land). Through this case study, a web augmenter applied to Wikipedia is automatically generated from environmental open data related to "Mar Menor" coastal lagoon; a highly anthropized ecosystem located in Southeast Spain. A focus group is conducted to validate that our generated web augmenter is easy to use and useful for environmental open data consumption., This research has been supported by projects TED2021-130890B funded by the Ministerio de Ciencia, Innovacibn y Universidades (MCIN)/Agencia Estatal de Investigacibn (AEI)/10.13039/501100011033 and by the European Union NextGenerationEU/Plan de Recuperacibn, Transformacibn y Resiliencia (PRTR), CIAICO/2022/019 funded by Generalitat Valenciana, and by REMARKABLE project (HORIZON-Marie Sklodowska-Curie Actions (MSCA)-2021-SE-0 action number: 101086387). Also, this work has been supported by the European Union's Horizon 2020 research and innovation programme under grant agreement No 101017861. Authors are especially grateful to FauNatura for their support in validating the results of this research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

User Experience with Adaptive User Interfaces: Comparing Performance and Preferences

  • Gaspar-Figueiredo, Daniel
  • Vanderdonckt, Jean
  • Abrahao Gonzales, Silvia Mara|||0000-0003-3580-2014
  • Insfran, Emilio|||0000-0003-0855-5564
[EN] Adaptive user interfaces dynamically change their content, presentation, and behavior to optimize the user experience, which has been primarily evaluated using classic usability measures but to a lesser extent by using neurological measures. While the perceived preference of specific user interface elements, such as graphical adaptive menus, has already been studied, no consensus exists regarding their performance and how to substitute a static menu with an adaptive one. To gain insights into how graphical adaptive menus could influence the user experience and to identify any correlation between users¿ performance and their preferences, we conducted an experiment in which forty participants used twenty graphical adaptive menus while their brain activity was captured by employing electroencephalography to derive four measures (i.e., cog- nitive load, engagement, attraction, and memorization). User performance was measured using task completion time, specifically the time to select menu items. Statistical analysis suggested which graphical adaptive menus were significantly better or worse than the static menu, our baseline. These results are used as the basis to suggest implications for software developers and researchers to design more effective adaptive user interfaces., This research has been funded by the State Research Agency under grant no. PID2022-140106NB-I00 (UCI-Adapt project) and Generalitat Valenciana (GVA) under grant CIAICO-/2021/303 (AKILA project). Daniel Gaspar-Figueiredo is funded by the GVA through a research fellowship with reference ACIF/2021/172. Jean Vanderdonckt is supported by the EU EIC Pathfinder-Awareness Inside challenge Symbiotik project (1 Oct. 2022 30 Sep. 2026) under Grant no. 101071147. These actions are also co-funded by the European Union through the Operational Program of the European Social Fund (ESF). We would also like to thank Quentin Sellier for helping us in the experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Compatibility Study of Polyamide (PA6) with Lubricant Bases for Electric Vehicle Applications

  • Tormos, B.|||0000-0002-8852-3783
  • Bermúdez, Vicente|||0000-0002-2781-5598
  • Balaguer-Reyes, Adbeel Elienai
  • Giménez Torres, Enrique|||0000-0002-6330-0209
[EN] This study explored the crucial relationship between base fluids and polyamide, a prevalent polymer in electric vehicle (EV) components, with the aim of enhancing the longevity and performance of EVs in the context of thermal management by immersion cooling. Focusing on polyalphaolefin and polyol ester as base fluids, an immersion test was conducted to assess their interaction with polyamide 6 using adapted ASTM standards. The results revealed the significant influences of both fluids on the physical properties and chemical structure of polyamide. Polyol ester demonstrated a lesser impact on the chemical and mechanical properties of polyamide 6., This research was partly supported by the project CIAICO/2021/013 AICO 2022 funded by GVA, Generalitat Valenciana. Adbeel Balaguer is supported through the program Subvenciones para la contratación de personal investigador predoctoral of the Generalitat Valenciana and the European Social Fund Plus [grant number CIACIF/2021/241].