Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 72
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Boosting TiO2 photocatalytic hydrogen production via silica-core engineering, optimized shell architecture, and Pd nanoparticles decoration

  • Diego-López, Ander|||0000-0001-5947-9579
  • Tamarit-Mayo, Lorena
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Bosca Mayans, Francisco
[EN] Photocatalytic wastewater photoreforming is recognized as a sustainable method for hydrogen generation. In this study, a SiO2@TiO2¿Pd photocatalyst was rationally designed to achieve a balance among high photocatalytic efficiency, ease of recovery, and recyclability. This work also addresses unexplored factors, including the role of the SiO2 core in H2 evolution and the influence of the TiO2 shell thickness on photocatalytic performance. To this end, several core@shell SiO2@TiO2 photocatalysts with controlled TiO2 shell thicknesses were synthesized. The experiments on H2 evolution from glycerol photoreforming revealed that the hydrogen evolution rate is strongly influenced by both the TiO2 shell thickness and the SiO2 core, with the optimum TiO2 shell thickness (ca. 28 nm) photocatalyst showing a hydrogen generation rate 7 times higher than that of P25 (based on hydrogen evolution reaction, HER, rates normalized to the photoactive component of the materials). Decoration of the surface of the optimized SiO2@TiO2 photocatalyst with Pd nanoparticles further increased the hydrogen production rate per photoactive gram by 54-fold (31.9 mmol·h¿1·g¿1). To understand the mechanisms underlying the improved photocatalytic performance, photophysical and (photo)electrochemical characterizations were performed using laser flash photolysis, photoluminescence spectroscopy, and photocurrent measurements. Overall, this study demonstrates that a SiO2 core not only facilitates easier photocatalyst recovery but also positively influences its H2 production performance, resulting in a material 371 times more active than P25. These findings pave the way for the development of SiO2-supported photocatalysts for simultaneous treatment of wastewater and hydrogen production in continuous-flow systems., The authors would like to acknowledge the Spanish Ministry of Science, Innovation and Universities (TED2021-131952B-I00 and PID2023-151872OB-I00, financed by MCIN/AEI/10.130 39/501100011033 and by European Union NextGenerationEU/PRTR) . Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.130 39/501100011033) is gratefully acknowledged. This research was supported by Generalitat Valenciana through CLEAN-LAGOON project (PROMETEO/CIPROM-2024-49) . A. Diego-Lopez is indebted to the Universitat Politecnica de Valencia for the corresponding Predoctoral FPI fellowship (FPI-UPV/Subprograma 1, PAID-01-22) . L. Tamarit is grateful to the Universitat Politecnica de Valencia for the corresponding co-financed postdoctoral grant (PAID-10-24) . The authors would like to acknowledge the Servei de Microscopia Electronica from the Universitat Politecnica de Valencia (UPV) for the support in the materials characterization and sample preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electron Channeling Contrast Imaging for the Characterization of Dislocations in III-V Thin Films on Silicon (001)

  • Monge-Bartolome, Laura
  • Mouriño-Miñambres, Paula|||0009-0003-6511-1246
  • Sinusia-Lozano, Miguel|||0000-0002-1744-4148
  • Gómez-Hernández, Víctor Jesús|||0000-0003-2364-8814
  • Peiro Codoñer, Alicia
  • Yan, Zhao
  • Garcia Vara, Ivan
  • Baron, Thierry
  • Li, Qiang
[EN] Characterization of defects is essential for the semiconductor industry, as they can be detrimental to device performance. Electron channeling contrast imaging(ECCI) is an electron diffraction technique performed in a scanning electron microscope that has emerged as a fast and nondestructive technique for defect characterization. Herein, ECCI is applied to the characterization of extended defects in the heteroepitaxy of III¿V semiconductor thin ¿lms on silicon. Thein¿uence of the electron-beam parameters (beam energy and current) is studied to optimize the ECCI micrographs. Additionally, the in¿uence of the diffraction condition on the visibility and contrast of two types of extended defects¿threading dislocations and stacking faults¿is studied. Moreover, the in¿uence of the diffraction conditions on the density of extended defects measured in the ECCI micrographs is studied, giving a lower limit of the extended defects density. This work shows that ECCI is a promising technique for deep study of extended defects in the heteroepitaxy of III¿V semiconductor thin ¿lms on Si, revealing a huge potential for wafer mapping, which is crucial for homogeneity testing and scalability., This work was supported in part by the project Zero-loss Energy harvesting Using nanowire solar cells in Space , funded by the European Union, Horizon Europe, EIC Project 101161465 (ZEUS). M.S.L. acknowledges financial support from the Generalitat Valenciana (Project: CIAPOS/2021/293). L.M.B. acknowledges Ayuda a Primeros Proyectos de Investigación (PAID-06-24), Vicerrectorado de Investigación de la Universitat Politècnica de València (UPV). V.J.G. acknowledges the Generalitat Valenciana (CDEIGENT/2020/009, and ESGENT/2024/17), the Conselleria de Educación, Universidades y Empleo under the NIRVANA Grant (PROMETEO Program, CIPROM/2022/14), and to the AGENCIA ESTATAL DE INVESTIGACIÓN of Ministerio de Ciencia, Innovacion y Universidades Grant CNS2023-145093 funded by MICIU/AEI/10.13039/ 501100011033 and by European Union NextGenerationEU/PRTR . All authors acknowledge AGENCIA ESTATAL DE INVESTIGACIÓN of Ministerio de Ciencia e Innovacion (PID2024-162261NB-I00 and EQC2021- 007244-P) and to the European Regional Development Fund (ERDF) (IDIFEDER/2020/041, IDIFEDER/2021/061), and the Quantum Communications program supported by Ministerio de Ciencia e Innovacion (MCIN) with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (COMCUANTICA/003).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Image database of synthetic capacitive Electrochemical Impedance Spectroscopy (EIS) spectra for system identification [Dataset]

  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • Giner-Sanz, Juan José|||0000-0003-0441-6102
  • Sáez-Pardo, Fermín|||0009-0000-0759-6781
The database comprises 48 000 different examples consisting in synthetic Nyquist plots generated using Voigt circuits with between one and four time constants. The examples are classified into 4 different classes acording to the number of time constants: class 1 corresponds to 1 time constant, class 2 to 2 time constants, class 3 to 3 time constants, and class 4 to 4 time constants., Espectroscopía de impedancias electroquímicas. Identificación de circuitos eléctricos equivalentes vía inteligencia artificial project. Project founded by Universidad Politécnica de Valencia (PAID 01-22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of Extrusion Compression Ratio and Particle Size of Rice on the Sectional Expansion Index of Third-Generation Snacks

  • Vicente-Jurado, Diana|||0009-0005-2326-5807
  • García-Segovia, Purificación|||0000-0002-4968-5050
  • Gutiérrez Cano, José Daniel
  • Martínez-Monzó, Javier|||0000-0002-1123-2304
  • Catalá Civera, José Manuel|||0000-0002-0617-1762
  • Igual Ramo, Marta|||0000-0001-5128-5489
[EN] Third-generation (3G) rice pellets were obtained using rice flour (RF) and rice grits (RG), raw materials of similar compositions but different particle sizes. The samples were mixed with water to 25% moisture and extruded using a laboratory single-screw extruder (Kompakt KE 19/25 extruder) and three compression ratios (1:1, 2:1, and 3:1). The pellets were expanded using a microwave oven subjected to 1000 W/g power. After evaluating the expansion kinetics and the sectional expansion index (SEI), it was observed that the 3:1 compression ratio allowed for greater expansion, while the particle difference showed no significant difference (p > 0.05) in the SEI., This research was funded by the FPI Ph.D. contract granted by Universitat Politècnica de València Subprograma 1 (PAID-01-22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cognitive Agents in Urban Mobility: Integrating LLM Reasoning into Multi-Agent Simulations

  • Calderón-Orellana, Christián Vladimir|||0009-0004-9199-6911
  • Martí, Pasqual|||0000-0001-6406-0641
  • Jordán, Jaume|||0000-0003-0400-9136
  • Palanca Cámara, Javier|||0000-0002-6209-9603
  • Julian, Vicente|||0000-0002-2743-6037
[EN] Urban mobility systems face escalating challenges associated with sustainability, equity, and resilience, further compounded by environmental pressures. Traditional agent-based models (ABMs) often fail to capture cognitively rich, adaptive behaviors, limiting their ability to simulate realistic user responses to disruptions. In this work, we propose a cognitive agent architecture based on Large Language Models (LLMs), featuring multi-horizon memory-driven planning, reflection, and adaptation. Integrated into the SimFleet agent-based simulator with realistic sociodemographic profiles, the agents dynamically generate, adjust, and reflect upon travel plans across a 20-day simulation involving over 320 individuals. Experimental results reveal emergent adaptation patterns under both stable and disrupted transport conditions, and an ablation study under severe service disruption quantifies the contributions of short-term and long-term memory modules to memory-driven reasoning, demonstrating the potential of LLM-driven agents to enhance the realism, flexibility, and interpretability of urban mobility simulations., This work was partially supported by the Spanish Government through grant PID2021-123673OB-C31 (MCIN/AEI/10.13039/501100011033) and the European Regional Development Fund (ERDF, "A way of making Europe"). Additional support was provided by grant TSI-100930-2023-9 from the "Secretaria de Estado de Digitalizacion e Inteligencia Artificial, Catedra ENIA-UPV", and by the PAID-01-22 programme for the recruitment of doctors within the Spanish Science and Technology System at the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of a reduced primary reference fuel-oxymethylene dimethyl ether (PRF-OMEx) mechanism for diesel engine applications

  • García-Oliver, José M|||0000-0002-2676-9681
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Micó, Carlos|||0000-0001-5787-6212
  • Khalid, Usama Bin
[EN] Oxymethylene dimethyl ethers (OMEx), having a chemical formula of CH3O-(CH2O)(x)-CH3 where x varies from 1 to 5, have been widely considered as a promising fuel to partially replace diesel in CI engines in terms of reducing soot emissions. This work is focused on developing a reduced primary reference fuel (PRF)-OMEx chemical mechanism to better describe the combustion and emission characteristics of gasoline/diesel blends with OMEx. The novelty of this work lies in the fact that the OMEx part of the mechanism is represented not only by OME3 as done in most studies found in literature, but also with other OME chain lengths that is, OME2-4 which are considered to be optimum and better represent the commercial OMEx blends. For this purpose, a detailed OMEx mechanism is reduced by applying different reduction techniques considering a wide range of operating conditions including pressure, temperatures, equivalence ratios and fuel compositions. The result is merged with an already validated PRF mechanism to form a reduced PRF-OMEx mechanism consisting of 213 species and 840 reactions. The newly formed mechanism is validated against a wide set of experimental data including ignition delay times, laminar flame speeds and species concentration profiles. Furthermore, a rigorous set of numerical simulations for various diesel-OMEx blends in a compression ignition engine are carried out at two different operating points to validate the developed mechanism. Simulation results highlight that the developed mechanism not only replicates the experimental behavior in terms of in-cylinder pressure and heat release rate but exhibits a better combustion phasing closer to experimental data when compared with other mechanisms where only OME3 is utilized to represent OMEx. Overall, the developed PRF-OMEx mechanism proves to be realistic and suitable for application in engine combustion simulations involving gasoline/diesel and OMEx blends., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This work has been partially funded by Universitat Politecnica de Valencia through grant agreement UPV-Subprograma 2 (PAID-01-22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mechanical characterization and ML-based prediction of 3D-printed PLA+: effects of infill pattern, infill density, and orientation

  • Llidó Barragán, Alexandra|||0009-0006-4847-8048
  • Unamuno-Garay, Aritz
  • Ferrándiz Bou, Santiago|||0000-0001-7137-9298
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Pavón-Vargas, Cristina Paola|||0000-0003-2902-0059
[EN] Additive manufacturing (AM) enables the fabrication of lightweight, customizable components. Among its technologies, Fused Filament Fabrication (FFF) stands out for simplicity, low cost, and versatility. This work investigates how infill pattern, density, and raster angle affect PLA+ specimens using a combined experimental¿computational approach that integrates mechanical testing, statistical analysis (ANOVA), and machine learning (ML). Specimens were printed with a Prusa i3 MK3+under FFF conditions, evaluating four infill patterns (Honeycomb, Grid, Triangles, Gyroid), four density levels (20¿80%), and three raster angles (0°, 45°, 90°) in a full factorial design. Tensile, impact, and stiffness tests showed infill density as the dominant factor, accounting for 61.7% of the variance in tensile strength and 57.1% in impact strength, followed by infill pattern and raster angle. Significant interactions (p < 0.05) confirmed that mechanical behaviour depends on parameter combinations rather than individual factors. The highest tensile strength (52.3 MPa) and elongation at break (9.8%) were obtained with the Honeycomb pattern at 80% density and 0° raster angle, while impact strength peaked at 45° raster angle. The main contribution is the integration of a systematic full-factorial experimental design with ML models (CatBoost and XGBoost) to analyze and predict the mechanical response of FFF-printed structures. The results establish a hierarchy of parameter influence: infill density governs mechanical performance, followed by infill pattern and raster angle. This framework identifies parameter combinations that balance strength, impact strength, and manufacturability, while predicting the mechanical properties of untested printing configurations., Alexandra Llidó Barragán gratefully acknowledges the Universitat Politècnica de València for the support provided through the predoctoral grant PAID-01-22. Cristina Pavon also acknowledges the postdoctoral grant PAID-10-23 from Universitat Politècnica de València. Funding for open access charge: CRUE Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Numerical and Optical Assessment of Different Solutions for Pollutant Emission Reduction in Compression Ignition Engines

  • Khalid, Usama Bin
[ES] La reducción de la huella de carbono de los motores de combustión interna así como de sus emisiones contaminantes es necesaria para la supervivencia de esta tecnología, especialmente para aplicaciones de uso medio y pesado. En la última década, investigadores y fabricantes han explorado diferentes enfoques para lograr este objetivo. En este sentido, el uso de combustibles alternativos y tecnologías alternativas se considera una vía potencial para alcanzarlo. Dentro del ámbito de los combustibles alternativos, los e-fuels y los biocombustibles están ganando relevancia, ya que pueden ser utilizados sin modificaciones importantes en la tecnología de motores de combustión interna. El primer término se refiere a combustibles que pueden ser tanto gaseosos como líquidos y que se producen a partir de electricidad renovable mediante un proceso sintético que consume dióxido de carbono y agua. El segundo se refiere a combustibles producidos a partir de biomasa y residuos orgánicos. Entre los e-fuels, destacan los éteres dimetílicos de oximetileno, y entre los biocombustibles, es particularmente notable el aceite vegetal hidrotratado. Por un lado, los primeros destacan por reducir drásticamente las emisiones contaminantes, aunque presentan problemas como una menor densidad energética y compatibilidad con los motores convencionales cuando se utilizan en estado puro. Por otro lado, el aceite vegetal hidrotratado presenta propiedades similares a las del diésel y se considera un buen sustituto de este a pesar de reducir menos las emisiones contaminantes que los éteres de dimetileno de oximetileno. Sin embargo, ambos combustibles, cuando se producen exclusivamente a partir de recursos renovables, pueden reducir drásticamente la huella de carbon. Otra forma de abordar la reducción de las emisiones contaminantes, que ha proporcionado grandes avances en el pasado, es el diseño de nuevo hardware directamente implicado en el proceso de combustión. Desde geometrías complejas del cuenco del pistón o de toberas de los inyectores hasta nuevos conceptos como la inyección de combustible por conductos para aplicaciones pesadas, que mejoran el proceso de mezcla aire-combustible aumentando la eficiencia y reduciendo la formación de contaminantes. No obstante, es necesario comprender mejor su impacto en el proceso de combustión y en el rendimiento del motor para su correcta aplicación en soluciones commercials. A la luz de lo anterior, la presente tesis se centra en avanzar en el conocimiento del comportamiento de los combustibles alternativos y los nuevos conceptos de hardware en las condiciones de funcionamiento de los motores de encendido por compresión y su impacto en el rendimiento de la combustión y la formación de contaminantes. Estas evaluaciones se realizan tanto mediante simulaciones numéricas detalladas como mediante experimentos llevados a cabo en un motor de encendido por compresión ópticamente accesible, utilizando diversas técnicas ópticas. Los resultados ponen de relieve que estos dos enfoques prometedores pueden reducir en gran medida la formación de contaminantes en el interior del motor de encendido por compresión y pueden ser una solución potencial al problema cada vez mayor de la huella de carbono y las emisiones contaminantes de los motores de encendido por compresión., [CA] La reducció de la petjada de carboni dels motors de combustió interna així com de les seues emissions contaminants és necessària per a la supervivència d'esta tecnologia, especialment per a aplicacions d'ús mitjà i pesat. En l'última dècada, investigadors i fabricants han explorat diferents enfocaments per a aconseguir este objectiu. En este sentit, l'ús de combustibles alternatius i tecnologies alternatives es considera una via potencial per a aconseguir-ho. Dins de l'àmbit dels combustibles alternatius, els e-fuels i els biocombustibles estan guanyant rellevància, ja que poden ser utilitzats sense modificacions importants en la tecnologia de motors de combustió interna. El primer terme es refereix a combustibles que poden ser tant gasosos com líquids i que es produeixen a partir d'electricitat renovable mitjançant un procés sintètic que consumeix diòxid de carboni i aigua. El segon es refereix a combustibles produïts a partir de biomassa i residus orgànics. Entre els e-fuels, destaquen els èters dimetílics d'oximetilè, i entre els biocombustibles, és particularment notable l'oli vegetal hidrotratat. D'una banda, els primers destaquen per reduir dràsticament les emissions contaminants, encara que presenten problemes com una menor densitat energètica i compatibilitat amb els motors convencionals quan s'utilitzen en estat pur. D'altra banda, l'oli vegetal hidrotratat presenta propietats similars a les del dièsel i es considera un bon substitut d'este malgrat reduir menys les emissions contaminants que els èters dimetílics d'oximetilé. No obstant això, tots dos combustibles, quan es produïxen exclusivament a partir de recursos renovables, poden reduir dràsticament la petjada de carboni. Una altra manera d'abordar la reducció de les emissions contaminants, que ha proporcionat grans avanços en el passat, és el disseny de nou maquinari directament implicat en el procés de combustió. Des de geometries complexes del bol del pistó o de toveres dels injectors fins a nous conceptes com la injecció de combustible per conductes per a aplicacions pesades, que milloren el procés de mescla aïre-combustible augmentant l'eficiència i reduint la formació de contaminants. No obstant això, és necessari comprendre millor el seu impacte en el procés de combustió i en el rendiment del motor per a la seua correcta aplicació en solucions comercials. A la llum de l'anterior, la present tesi se centra en avançar en el coneixement del comportament dels combustibles alternatius i els nous conceptes de maquinari en les condicions de funcionament dels motors d'encesa per compressió i el seu impacte en el rendiment de la combustió i la formació de contaminants. Estes avaluacions es realitzen tant mitjançant simulacions numèriques detallades com mitjançant experiments duts a terme en un motor d'encesa per compressió òpticament accessible, utilitzant diverses tècniques òptiques. Els resultats posen en relleu que estos dos enfocaments prometedors poden reduir en gran manera la formació de contaminants a l'interior del motor d'encesa per compressió i poden ser una solució potencial al problema cada vegada major de la petjada de carboni i les emissions contaminants dels motors d'encesa per compressió., [EN] The reduction of the carbon footprint of internal combustion engines and the pollutant emissions is mandatory for the survival of this technology, especially for medium and heavy-duty applications. In the last decade, researchers and manufacturers have explored different approaches to achieve this goal. In this sense, the use of alternative fuels and alternative technologies is considered as a potential pathway to reach this objective. Within the scope of alternative fuels, e-fuels and biofuels are gaining relevance as they can be utilized without major modifications of the internal combustion engine technology. The former term refers to fuels that can be both gaseous or liquid and are produced from renewable electricity in a synthetic process consuming carbon dioxide and water. The latter refers to fuels produced from biomass and organic waste. Among e-fuels, oxymethylene dimethyl ethers stand out, and among biofuels, hydrotreated vegetable oil is particularly notable. On the one hand, oxymethylene dimethyl ethers drastically reduce pollutant emissions however suffer challenges like lower energy density, and compatibility with conventional engines when utilized in pure form. On the other hand, hydrotreated vegetable oil presents similar properties as compared to diesel and is considered a good drop in fuel for fossil diesel despite providing a lesser pollutant reduction when compared with oxymethylene dimethyl ethers. However, these fuels, when produced solely from renewable resources, can drastically reduce the carbon footprint. Another way to address pollutant emission reduction, which has provided great advances in the past, is the design of new hardware directly involved with the combustion process. From complex piston bowl geometries or injector nozzles to new concepts like ducted fuel injection for heavy-duty applications, which improves the air-fuel mixing process increasing efficiency and reducing pollutant formation. Nevertheless, a better understanding of their impact on the combustion process and engine performance is required for proper implementation in commercial solutions. In light of the aforementioned text, the current thesis is focused on advancing the knowledge of the behaviour of alternative fuels and new hardware concepts under operating conditions of compression ignition engines and their impact on combustion performance and pollutant formation. These assessments are done both by detailed numerical simulations and experiments carried out in an optically accessible compression ignition engine, utilizing a variety of optical techniques. Results highlight that these two promising approaches can greatly reduce the pollutant formation inside the compression ignition engine and can be a potential solution to the ever-increasing carbon footprint and pollutant emissions problem of compression ignition engines., The author would like to acknowledge the financial support received through contract UPV - Subprograma 2 (PAID-01-22) del Vicerrectorado de Investigaciòn, which was incremental in the development of this thesis at I.U.I. CMT – Clean Mobility & Thermofluids, Universitat Politècnica de València. Furthermore, author also acknowledges the grant Ayudas Para Movilidad de Estudiantes de Doctorado de la Universitat Politècnica de València - 2022, which made his research stay possible at Sandia National Laboratories.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Monte Carlo simulation and unfolding of an extended Bonner sphere system for secondary neutron spectrometry in proton therapy facilities using conventional BSS experimental data

  • Díaz-Comeche, A.
  • Oliver-Gil, Sandra|||0000-0001-8258-3972
  • Juste-Vidal, Belen-Jeanne|||0000-0003-1978-3765
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
  • Jardin, Daniel
  • Zakhary, Mark
  • Mossahebi, Sina
  • Mille, Matthew M.
  • Lee, Choonsik
  • Morató-Rafet, Sergio
[EN] The extended-range Bonner Sphere Spectrometer (BSS) is a valuable tool for characterizing neutron fields in radiotherapy, including proton therapy facilities, where secondary neutrons contribute to the incidental dose received by the patient and staff. In this study we developed and validated a Monte Carlo (MC) model of an extended-range BSS by benchmarking against experimental measurements performed using a conventional BSS in a proton therapy facility. The extendedrange system, which includes four additional spheres with aluminum and lead layers, was not available for this work; instead, simulations were validated against conventional BSS data and then applied to extrapolate the high-energy portion of the neutron spectrum. The MC simulations were performed usingMCNP version 6.3 and include modelling of the BSS and using BSS response functions previously validated. The comparison in data trends between simulations and measurements confirms the reliability of the simulation model. The acquired neutron spectra show the characteristic shape, but also noticeable differences between the measurement locations in the intensity and width of the direct, evaporation, and thermal peaks. These differences are consistent with the changingmeasurement conditions in each case. The obtained spectra show similarity with other spectra available in literature. This work demonstrates that MC-modeled extended-range BSS can accurately characterize secondary neutron spectra in proton therapy facilities, providing a foundation for improved radiation protection and dose optimization studies., The author(s) declared that financial support was received for this work and/or its publication. This work was partially supported by a grant from the Mobility Sub-programme within the Spanish Programme for the Promotion of Talent and its Employability, within the framework of the State Plan for Scientific, Technical and Innovation Research (PEICTI) 2021-2023, reference PRX22/00379, and also the Ministry of Science, Innovation and Universities of the Government of Spain. This research was supported in part by the Intramural Research Program of the National Institute of Health (NIH) and the National Institute of Standards and Technology (NIST). The contributions of the NIH and NIST author(s) were made as part of their official duties as federal employees, are in compliance with agency policy requirements, and are considered Works of the United States Government. However, the findings and conclusions presented in this paper are those of the author(s) and do not necessarily reflect the views of the NIH, NIST, the U.S. Department of Health and Human Services, or the U.S. Department of Commerce. This study was partially supported by IRAMED (CIPROM/2022/38) from "Conselleria d'Innovacio, Universitats, Ciencia i Societat Digital" funded by "Generalitat Valenciana", under the program PROMETEO 2023.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

3D Point Cloud and GIS Approach to Assess Street Physical Attributes

  • Orozco-Carpio, Patricio Rodrigo|||0009-0007-3437-7390
  • Viñals, Mª José|||0000-0002-7589-7815
  • López González, María Concepción|||0000-0001-7542-3559
[EN] The present research explores an innovative approach to objectively assessing urban streets attributes using 3D point clouds and Geographic Information Systems (GIS). Urban streets are vital components of cities, playing a significant role in the lives of their residents. Usually, the evaluation of some of their physical attributes has been subjective, but this study leverages 3D point clouds and digital terrain models (DTM) to provide a more objective perspective. This article undertakes a microurban analysis of basic physical characteristics (slope, width, and human scale) of a representative street in the historic centre of Valencia (Spain), utilizing 3D laser-scanned point clouds and GIS tools. Applying the proposed methodology, thematic maps were generated, facilitating the objective identification of areas with physical attributes more conducive to suitable pedestrian dynamics. This approach provides a comprehensive understanding of urban street attributes, emphasizing the importance of addressing their assessment through advanced digital technologies. Moreover, this versatile methodology has diverse applications, contributing to social sustainability by enhancing the quality of urban streets and open spaces., This research was funded by the project "Analysis and Development of HBIM Integration into GIS for Creating a Cultural Heritage Tourism Planning Protocol" (ref. PID2020-119088RB-I00), funded by the Ministry of Science and Innovation, Government of Spain, and the "Programa de Ayudas de Investigacion y Desarrollo (PAID-01-22)" by the Universitat Politecnica de Valencia. The APC will be funded by Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Definición de una estrategia metodológica para el análisis multidimensional de los espacios públicos en centros históricos. Estudio del caso: Valencia - España

  • Orozco-Carpio, Patricio Rodrigo
[ES] Los espacios públicos en centros históricos enfrentan el desafío de equilibrar las dinámicas urbanas contemporáneas y la presión turística. Esta complejidad hace que su análisis sea especialmente relevante; sin embargo, los enfoques existentes suelen presentar limitaciones relacionadas con la consistencia en la recolección e interpretación de datos, la escasa consideración de la multidimensionalidad y la falta de atención a la escala humana, lo que deriva en lecturas fragmentadas y dificulta la toma de decisiones. En respuesta, esta investigación tiene como objetivo desarrollar una estrategia metodológica que optimice y haga más fiable el análisis de los espacios públicos mediante el uso de tecnologías digitales, como los Sistemas de Información Geográfica (SIG), modelos tridimensionales de alta resolución y sistemas de mallas o grillas globales, utilizadas para la recopilación, medición y análisis de datos en espacios públicos de centros históricos. Dicha metodología además aborda aspectos multidimensionales en los espacios públicos, como el publicness, mediante la revisión y adecuación de distintos enfoques y estrategias de medición. Así mismo, incorpora una perspectiva centrada en la escala humana, considerando elementos propios de la configuración microurbana que influyen en la experiencia de los usuarios. Para ello, se realiza una revisión de conceptos y herramientas existentes, los cuales se adaptan en función de los objetivos de la investigación, permitiendo su integración en un mismo entorno digital y metodológico. Finalmente se aplica la estrategia propuesta en el caso concreto de un conjunto de espacios públicos en el centro histórico de Valencia, España. El principal resultado de esta investigación es la propia metodología, en conjunto con las diversas herramientas desarrolladas para analizar los espacios públicos a microescala mediante el uso de tecnologías digitales. Producto de esto, se generan mapas que integran datos asociados a características multidimensionales, los cuales permiten una comprensión más completa y minuciosa de los espacios públicos al alejarse de representaciones simplificadas que se limitan al inventariado de componentes urbanos. Esto facilita la identificación de dinámicas y elementos que suelen pasar desapercibidos en análisis tradicionales. Así mismo, la incorporación del turismo como variable clave refuerza la aplicabilidad de la metodología en contextos históricos. En conjunto, la investigación propone un marco metodológico transferible y replicable que contribuye a mejorar el análisis y la gestión de los espacios públicos en centros históricos, promoviendo un equilibrio entre la vida urbana y el uso turístico, basado en una toma de decisiones informada., [EN] Public spaces in historic city centres face the challenge of balancing contemporary urban dynamics and tourism pressure. This complexity makes their analysis particularly relevant; however, existing approaches often present limitations related to consistency and interpretation in data collection, limited consideration of multidimensionality, and insufficient attention to the human scale, resulting in fragmented interpretations that hinder decision-making. In response, this research aims to develop a methodological strategy that optimizes and improves the reliability of public space analysis through the use of digital technologies, such as Geographic Information Systems (GIS), high-resolution 3D models, and global grid systems, applied to the collection, measurement, and analysis of data in public spaces within historic centres. The methodology also addresses multidimensional aspects of public space, such as publicness, through the review and adaptation of different measurement approaches and strategies. It further incorporates a humanscale perspective, considering micro-urban configuration elements that shape users' experiences. To achieve this, existing concepts and tools are reviewed and adapted to align with the research objectives, enabling their integration within a unified digital and methodological framework. The proposed strategy is then applied to a set of public spaces in the historic centre of Valencia, Spain. The main result of this research is the methodology itself, together with the set of tools developed to analyse public spaces at the micro scale using digital technologies. As an outcome, maps that integrate data related to multidimensional characteristics are produced, allowing for a more detailed and comprehensive understanding of public spaces by moving beyond simplified representations limited to the inventory of urban elements. This facilitates the identification of dynamics and features that are often overlooked in traditional analyses. Additionally, the inclusion of tourism as a key variable enhances the applicability of the methodology in historic contexts. Overall, the research proposes a transferable and replicable methodological framework that contributes to improving the analysis and management of public spaces in historic city centres, promoting a balance between urban life and tourism use based on informed decision-making., [CA] Els espais públics en centres històrics enfronten el desafiament d'equilibrar les dinàmiques urbanes contemporànies i la pressió turística. Esta complexitat fa que la seua anàlisi siga especialment rellevant; no obstant això, els enfocaments existents solen presentar limitacions relacionades amb la consistència i la interpretació en la recol·lecció de dades, l'escassa consideració de la multidimensionalitat i la falta d'atenció a l'escala humana, la qual cosa deriva en lectures fragmentades i dificulta la presa de decisions. En resposta, esta investigació té com a objectiu desenrotllar una estratègia metodològica que optimitze i fiabilice l'anàlisi dels espais públics mitjançant l'ús de tecnologies digitals, com els Sistemes d'Informació Geogràfica (SIG), models tridimensionals d'alta resolució i sistemes de malles globals, utilitzades per a la recopilació, mesurament i anàlisi de dades en espais públics de centres històrics. Esta metodologia a més aborda aspectes multidimensionals en els espais públics, com el publicness, mitjançant la revisió i adequació de diferents enfocaments i estratègies de mesurament. Així mateix, incorpora una perspectiva centrada en l'escala humana, considerant elements propis de la configuració microurbana que influïxen en l'experiència dels usuaris. Per a això, es realitza una revisió de conceptes i ferramentes existents, els quals s'adapten en funció dels objectius de la investigació, permetent la seua integració en un mateix entorn digital i metodològic. Finalment s'aplica l'estratègia proposada en el cas concret d'un conjunt d'espais públics en el centre històric de València, Espanya. El principal resultat d'esta investigació és la pròpia metodologia, en conjunt amb les diverses ferramentes desenrotllades per a analitzar els espais públics a microescala mitjançant l'ús de tecnologies digitals. Producte d'això, es generen mapes que integren dades associades a característiques multidimensionals, els quals permeten una comprensió més completa i minuciosa dels espais públics en allunyar-se de representacions simplificades que es limiten a l'inventariat de components urbans. Això facilita la identificació de dinàmiques i elements que solen passar desapercebuts en anàlisis tradicionals. Així mateix, la incorporació del turisme com a variable clau reforça l'aplicabilitat de la metodologia en contextos històrics. En conjunt, la investigació proposa un marc metodològic transferible i replicable que contribuïx a millorar l'anàlisi i la gestió dels espais públics en centres històrics, promovent un equilibri entre la vida urbana i l'ús turístic, sobre la base d'una presa de decisions informada., Esta investigación ha sido financiada por el proyecto “Definición de una estrategia para la gestión eficiente de los recursos culturales en los espacios públicos de los centros históricos. Estudio del caso: Valencia” como parte del “Programa de Ayudas de Investigación y Desarrollo (PAID-01-22)” por la Universitat Politècnica de València, y dentro del proyecto “Análisis y desarrollo de la integración HBIM en SIG para la creación de un protocolo de planificación turística del patrimonio cultural de un destino” (ref. PID2020-119088RB-I00), financiado por la Agencia Estatal de Investigación (AEI), Ministerio de Ciencia e Innovación, Gobierno de España
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Digestibility and Microbiota Modulation by Nuts and Sunflower Seeds in Cystic Fibrosis: An In Vitro Approach

  • Viteri-Echeverría, Jazmín Dayumara
  • Heredia Gutiérrez, Ana Belén|||0000-0001-6629-9779
  • Andrés Grau, Ana María|||0000-0002-6132-3167
  • Calvo-Lerma, Joaquim
  • Asensio-Grau, Andrea
[EN] Purpose: This study evaluated the lipid and protein digestibility and the prebiotic potential of almonds, hazelnuts, peanuts, and sunflower seeds through static in vitro gastrointestinal digestion and colonic fermentation, comparing healthy and cystic fibrosis (CF) conditions. Methods: The CF model included reduced pH, low bile salt concentration, and pancreatic enzyme replacement therapy. Digestibility was assessed via matrix degradation, proteolysis, and lipolysis, while microbiota composition and metabolic activity were analysed using faecal inoculum from paediatric CF donors. Results: Sunflower seeds and peanuts showed the highest lipolysis under CF conditions (46%), with sunflower seeds also achieving the highest proteolysis (457 mg tyrosine/g food). Beta-diversity analyses revealed significant differences in microbiota composition after simulated colonic fermentation between the four food samples, with sunflower seeds uniquely reducing Acidaminococcus and increasing the production of linear-chain short-chain fatty acids and lactate. In contrast, almonds exhibited notably low proteolysis, potentially due to antinutritional factors. Conclusion: These findings highlight the differential digestibility and microbiota modulation of nuts and seeds under CF-specific conditions, with sunflower seeds emerging as a promising dietary component for children with CF., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work was supported by Universitat Politècnica de València, (First Project Grant, ref. PAID-06- 22). We acknowledged to Universitat Politècnica de València for the pre-doctoral grant (PAID-01-22) awarded to Jazmín Viteri-Echeverría. We also thank the Juan de la Cierva formation post-doctoral contract awarded to Andrea Asensio-Grau by the Spanish Ministry of Science and Innovation (JDC2022-048768-I).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Future role of heavy-duty fuel cell vehicles in the decarbonization of the freight transport

  • López-Juárez, Marcos|||0000-0001-9886-4728
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • I. Nidaguila
  • Zacharof, N.
  • Guillaume, A.
  • Evangelos, B.
  • Fontaras, G.
[EN] As the world shifts towards cleaner and more sustainable transportation solutions, understanding the require ments and implications of hydrogen fuel cell technology in heavy-duty vehicles is crucial for informing industry developments and policy decisions. The objective of this paper is to investigate the hydrogen consumption and powertrain efficiency of heavy-duty fuel cell vehicles (HDFCVs) in various vehicle segments and powertrain de signs. To achieve this, a comprehensive methodology was employed, involving the integration of reference HDFCV models into the VECTO platform, simulation of different powertrain architectures using MATLAB Simulink, and estimation of current and future hydrogen demand for the heavy-duty vehicle fleet. The key results of this study indicate that the design spaces presented can serve as a baseline for industry stakeholders to select optimal battery sizes, fuel cell system powers, and hydrogen tank sizes, thereby accelerating vehicle development. Furthermore, policymakers can utilize the data on hydrogen consumption and powertrain efficiency to define key performance indicators, estimate future hydrogen demands, and compare the environmental impact of HDFCVs with other propulsion systems. In terms of HDFCV fleet H2 demand, addressing all the uncertainties raised in this work, it may vary from 1.6 to 2.8 Mt of H2 yearly, implying up to 3% of the current H2 production. Therefore, the H2 production infrastructure is able to accommodate more ambitious H2-related scenarios for the HDV sector. Finally, the H2 consumption ranges per vehicle class and powertrain design, together with the H2 tank capacity values sized on the basis of official VECTO cycles, constitute an original reference dataset-grounded in a math ematically guaranteed minimum consumption via an optimal energy management strategy-that can be directly used by vehicle manufacturers as a baseline for preliminary powertrain and hydrogen storage system design., This research was performed within the framework of the ALL-IN Zero project, which is funded by the European Union's Horizon Europe research and innovation program under grant agreement No 101069888. This research has also been partially funded by Universitat Politecnica de Valencia through the support program for research and develop ment (PAID-01-22) . Funding for open access charges: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental Assessment of the Influence of Drywall Infills on the Seismic Behaviour of RC Frame Buildings

  • Garcés-Arroyo, Jorge Ignacio
  • Pallarés Rubio, Francisco Javier|||0000-0003-4298-2287
  • Perelló Roso, Ricardo|||0000-0001-8037-9425
  • Pallarés Rubio, Luis|||0000-0003-2126-2387
[EN] The use of drywall as a non-structural infill has grown significantly due to its rapid and economical installation. Despite this widespread use, a common assumption in structural design is that these elements do not significantly affect seismic performance and are often ignored in analysis. This assumption, however, is increasingly questioned. This study presents a full-scale experimental evaluation of the influence of drywall infill on the seismic response of reinforced concrete frames under cyclic loading. The results quantify how the inclusion of these non-structural elements alters the dynamic properties and structural response of the frame. The infill increased the initial lateral stiffness by approximately three times with respect to the bare frame, thus modifying the structure's fundamental period. The infill also altered the failure mechanism, initiating with a transient compression strut action at very low drifts, which rapidly and concurrently transitioned into a dominant membrane behavior. This membrane contribution ceased abruptly at a drift of 0.89%, prior to the life-safety limits specified by Eurocode 8. The study's findings demonstrate the necessity of incorporating the non-linear stiffness and energy dissipation of drywall into structural models to ensure reliable and accurate predictions in seismic design methodologies., This research was funded by Instituto Valenciano de Competitividad e Innovacion (IVACE+i), grant number INNVA1/2023/97-SISPYL and entitled Validacion En Condiciones Reales De Funcionamiento Y Reduccion De Incertidumbres Del Diseno De Un Sistema De Aislamiento Sismico Para Tabiques Formados Por Placas De Yeso Laminado in the frame of Programa Fondo Europeo de Desarrollo Regional (FEDER) Comunitat Valenciana 2021-2027.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

New materials with advanced properties for label-free optical biosensing

  • Cubells-Gómez, Aitor|||0000-0001-6844-3439
[ES] La tesis doctoral titulada "Nuevos materiales con propiedades avanzadas para biosensado óptico sin marcaje" aborda el desarrollo de biosensores ópticos sin marcaje basados en hidrogeles biofuncionalizados transformados en redes difractivas que actúan como transductores ópticos, respondiendo a las demandas del diagnóstico in vitro, la medicina personalizada y las tecnologías portátiles para monitoreo en tiempo real. En el Capítulo 1 se presentan los conceptos fundamentales sobre biosensores, sus tipos, componentes y funcionamiento, destacando los biosensores holográficos y los hidrogeles como matrices de soporte, y proponiendo el uso de hidrogeles con anillos deslizantes para biosensado holográfico. El Capítulo 2 define los objetivos generales y específicos de la investigación, desarrollados en los capítulos experimentales. El Capítulo 3 ofrece una revisión crítica del estado del arte de biosensores holográficos basados en hidrogeles, sus principios de fabricación, métodos de detección y aplicaciones biomédicas, justificando la combinación de redes difractivas y polímeros sensibles como enfoque experimental. En el Capítulo 4 se presentan biosensores con redes de relieve superficial sobre hidrogeles de acrilamida biofuncionalizados con albúmina sérica bovina, demostrando detección directa de anticuerpos anti-BSA sin marcadores, optimizando transparencia y capacidad de hinchamiento, y logrando detecciones en niveles sub-mg L-1, además de validar detección de inmunoglobulinas G. El Capítulo 5 introduce hidrogeles tipo slide-ring con polirotaxanos, mejorando sensibilidad y estabilidad, reduciendo bioreceptores y validando clínicamente el sistema con sueros reales con recuperaciones del 70-75%. El Capítulo 6 se enfoca en la detección de la proteína C reactiva, biomarcador clave en inflamación y riesgo cardiovascular, mediante un hidrogel con fosforilcolina y polirotaxanos metilados, alcanzando límites de detección de 0,3 mg L-¹ y recuperaciones del 91-99%, demostrando alta sensibilidad y especificidad con ensayos de una hora. El Capítulo 7 desarrolla redes holográficas de volumen en hidrogeles biofuncionalizados mediante interferencia de doble haz, obteniendo biosensores portátiles, sensibles y estables, validados en el Centre for Industrial and Engineering Optics de la TU Dublin, consolidando bases para futuras aplicaciones clínicas. El Capítulo 8 compara metodologías de grabación con máscaras de fase y estrategias de incorporación del biorreceptor, demostrando que la unión dinámica mediante ciclodextrinas móviles mejora notablemente la biodisponibilidad y sensibilidad del sistema, aportando una innovación relevante en el control dinámico de elementos bioactivos en materiales blandos. Finalmente, el Capítulo 9 resume las conclusiones generales, confirmando el éxito en el desarrollo de hidrogeles biofuncionalizados aplicables a biosensores ópticos sin marcaje, caracterizados por especificidad, reproducibilidad, bajo coste y viabilidad para aplicaciones reales. En conjunto, la tesis aporta un recorrido integral desde la teoría hasta la validación experimental, demostrando la viabilidad de biosensores regenerables, adaptativos y portátiles para diagnóstico temprano y personalizado, abriendo nuevas perspectivas para la biomedicina, los dispositivos wearables y las tecnologías de atención primaria., [CA] La tesi doctoral titulada «Nous materials amb propietats avançades per al biosensat òptic sense marcadors» se centra en el desenvolupament de biosensors òptics sense marcadors basats en hidrogels biofuncionalitzats que es transformen en xarxes difractives que actuen com a transductors òptics, responent a les demandes actuals en diagnòstic in vitro (IVD), medicina personalitzada i tecnologies portàtils per al monitoratge en temps real. El Capítol 1 presenta els conceptes fonamentals dels biosensors, els seus tipus, components i funcionament, destacant els biosensors hologràfics i els hidrogels com a matrius de suport, i proposant l'ús d'hidrogels d'anells lliscants per al biosensat hologràfic. El Capítol 2 defineix els objectius generals i específics de la investigació, desenvolupats al llarg dels capítols experimentals. El Capítol 3 ofereix una revisió crítica de l'estat de l'art dels biosensors hologràfics basats en hidrogels, els seus principis de fabricació, mètodes de detecció i aplicacions biomèdiques, justificant la combinació de xarxes difractives i polímers sensibles com a enfocament experimental. El Capítol 4 presenta biosensors amb xarxes de relleu superficial (SRGs) sobre hidrogels d'acrilamida biofuncionalitzats amb albúmina sèrica bovina (BSA), demostrant la detecció directa d'anticossos anti-BSA sense marcadors, optimitzant la transparència i la capacitat d'inflament, aconseguint deteccions en nivells sub-mg L¿¹, i validant la detecció d'immunoglobulina G (IgG). El Capítol 5 introdueix hidrogels d'anells lliscants amb polirotaxans, millorant la sensibilitat i estabilitat, reduint la quantitat de bioreceptors necessaris i validant clínicament el sistema amb sèrums reals, obtenint recuperacions entre el 70 i el 75%. El Capítol 6 se centra en la detecció de la proteïna C reactiva (CRP), biomarcador clau d'inflamació i risc cardiovascular, mitjançant un hidrogel amb fosforilcolina i polirotaxans metilats, assolint límits de detecció de 0,3 mg L¿¹ i recuperacions entre el 91 i el 99%, demostrant alta sensibilitat i especificitat amb assaigs d'una hora. El Capítol 7 desenvolupa xarxes hologràfiques de volum (VHGs) en hidrogels biofuncionalitzats mitjançant interferència de doble feix, obtenint biosensors portàtils i estables, validats al Centre for Industrial and Engineering Optics de la TU Dublin, establint les bases per a futures aplicacions clíniques. El Capítol 8 compara metodologies d'enregistrament hologràfic amb màscares de fase i estratègies d'incorporació de bioreceptors, demostrant que la unió dinàmica mitjançant ciclodextrines mòbils millora significativament la biodisponibilitat i sensibilitat del sistema, aportant una innovació rellevant en el control dinàmic d'elements bioactius en materials tous. Finalment, el Capítol 9 resumeix les principals conclusions, confirmant l'èxit en el desenvolupament d'hidrogels biofuncionalitzats aplicables a biosensors òptics sense marcadors, caracteritzats per especificitat, reproductibilitat, baix cost i viabilitat pràctica. En conjunt, la tesi ofereix un recorregut complet des de les bases teòriques fins a la validació experimental, demostrant la viabilitat de biosensors regenerables, adaptatius i portàtils per al diagnòstic primerenc i personalitzat, obrint noves perspectives en biomedicina, dispositius portables i tecnologies d'atenció primària., [EN] The doctoral thesis entitled "New Materials with Advanced Properties for Label-Free Optical Biosensing" focuses on the development of label-free optical biosensors based on biofunctionalized hydrogels that transform into diffractive networks acting as optical transducers, addressing current demands in in vitro diagnostics (IVD), personalized medicine, and portable technologies for real-time monitoring. Chapter 1 presents the fundamental concepts of biosensors, their types, components, and operation, emphasizing holographic biosensors and hydrogels as support matrices, and proposing the use of slide-ring hydrogels for holographic biosensing. Chapter 2 defines the general and specific objectives of the research, developed throughout the experimental chapters. Chapter 3 provides a critical review of the state of the art in holographic biosensors based on hydrogels, their fabrication principles, detection methods, and biomedical applications, justifying the combination of diffractive networks and responsive polymers as an experimental approach. Chapter 4 presents biosensors with surface relief gratings (SRGs) on acrylamide hydrogels biofunctionalized with bovine serum albumin (BSA), demonstrating direct detection of anti-BSA antibodies without markers, optimizing transparency and swelling capacity, achieving detections in sub-mg L¿¹ ranges, and validating the detection of immunoglobulin G (IgG). Chapter 5 introduces slide-ring hydrogels with polyrotaxanes, improving sensitivity and stability, reducing the amount of bioreceptors required, and clinically validating the system with real serum samples, obtaining recoveries between 70-75%. Chapter 6 focuses on the detection of C-reactive protein (CRP), a key biomarker of inflammation and cardiovascular risk, through a hydrogel incorporating phosphorylcholine units and methylated polyrotaxanes, achieving detection limits of 0.3 mg L¿¹ and recoveries between 91-99%, demonstrating high sensitivity and specificity with one-hour assays. Chapter 7 develops volume holographic gratings (VHGs) in biofunctionalized hydrogels through double-beam interference, obtaining portable and stable biosensors, validated at the Centre for Industrial and Engineering Optics of TU Dublin, establishing foundations for future clinical applications. Chapter 8 compares holographic recording methodologies using phase masks and bioreceptor incorporation strategies, demonstrating that dynamic binding through mobile cyclodextrins significantly improves bioreceptor bioavailability and system sensitivity, offering a relevant innovation in the dynamic control of bioactive elements in soft materials. Finally, Chapter 9 summarizes the main conclusions, confirming the successful development of biofunctionalized hydrogels applicable to label-free optical biosensors, characterized by specificity, reproducibility, low cost, and practical feasibility. Overall, the thesis provides a comprehensive journey from theoretical foundations to experimental validation, demonstrating the feasibility of regenerable, adaptive, and portable biosensors for early and personalized diagnosis, opening new perspectives in biomedicine, wearable devices, and primary care technologies., This work was supported by ADBIHOL (PID2019-110713RB-I00) from MINECO and PROMETEO/2020/094 from Generalitat Valenciana. M. I. Lucío acknowledges MINECO for her Juan de la Cierva Incorporación grant (IJC 2018-035355-I). A. Cubells-Gómez acknowledges the FPI-UPV 2022 grant program (PAID-01-22). The authors acknowledge the assistance and advice from the Electron Microscopy Service of the Universitat Politècnica de València. This work was supported by project WEAROPSENS PID2022-140653OB-I00 funded by MICIU/AEI/ 10.13039/501100011033 and by “ERDF/EU” and PROGRAMA PROMETEO 2024 - CIPROM/2023/18 from Generalitat Valenciana. A. Cubells-Gómez acknowledges the FPI-UPV 2022 grant program (PAID-01-22). The authors acknowledge the assistance and advice from the Electron Microscopy Service of the Universitat Politècnica de València. This work was supported by project WEAROPSENS PID2022-140653OB-I00 funded by MICIU/AEI/ 10.13039/501100011033 and by “ERDF/EU” and PROMETEO CIPROM/2023/18. A. Cubells-Gómez acknowledges the FPI-UPV 2022 grant program (PAID-01-22) and the “Ayudas para movilidad de estudiantes de doctorado de la UPV – 2023”. Michael Murray is supported by Research Ireland Grant SFI 20/FFP-P/8851 (LIGHTSHAPE). The authors acknowledge the assistance and advice from the Electron Microscopy Service of the Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Robustness under noise: assessing the impact of perturbed key attributes on machine learning models

  • Padró-Ferragut, Cristina
  • Martínez-Plumed, Fernando|||0000-0003-2902-6477
  • Ramírez Quintana, María José|||0000-0002-0559-3568
[EN] Machine learning models often struggle when confronted with the complexities of real-world data, such as noise and incomplete information, which pose significant challenges for practical applications. This paper presents a systematic framework for assessing the robustness of machine learning models against these adversities. In particular, we investigate how noise affecting the most critical attribute of a dataset impacts on model predictions. Our methodology uses a variety of datasets, a wide range of machine learning models, and a customizable noise induction function, allowing for comprehensive evaluations tailored to specific application needs. Through an extensive experimental analysis, we identify the vulnerabilities of models when their critical attributes are perturbed. In addition, by applying hierarchical clustering, we categorise machine learning families based on their robustness, establishing a taxonomy that highlights the susceptibility of different models to noise. Our findings provide important insights into the interplay between model performance and noise levels and improve the understanding of model behaviour under adverse conditions., We acknowledge support from: CIPROM/2022/6 (FASSLOW) funded by Generalitat Valenciana; and Spanish grant PID2024-162030OB-I00 (ROBIN) funded by MCIN/AEI/10.13039/ 501100011033 and ERDF A way of making Europe", Cátedra ENIA-UPV in Sustainable AI Development, TSI-100930-2023-9, and INCIBE s Chair funded by the EU-NextGenerationEU through the Spanish government s Plan de Recuperación, Transformación y Resiliencia. CPF is supported by UPV under FPI grant PAID-01-22. Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Potential of 2-ethylhexyl nitrate (EHN) and di-tert-butyl peroxide (DTBP) to enhance the cetane number of ethanol, a detailed chemical kinetic study

  • Khalid, Usama Bin
  • López-Pintor, Darío
  • Lee, Sanguk
  • Micó, Carlos|||0000-0001-5787-6212
[EN] Ethanol is one of the most promising renewable liquid fuels to decarbonize the internal combustion engine due to its high production capacity, reasonable cost and low carbon intensity. At the same time, diesel engines are preferred over other powertrain technologies in most hard-to-electrify applications, such as heavy-duty, off-road, marine and rail. However, ethanol¿s properties are not suitable for modern diesel engines with ignitability being the main technical barrier for ethanol compression-ignition combustion. Cetane improvers, such as 2-ethylhexyl nitrate (EHN) or di-tert-butyl peroxide (DTBP) may be a solution to enable diesel-like ethanol combustion, but the potential of those additives to increase the cetane number of ethanol is still unclear. In this investigation, detailed chemical kinetic simulations were performed to better understand the mechanisms by which EHN and DTBP affect the ignition reactivity of ethanol. Sub-models of EHN and DTBP chemistry were merged with a chemical kinetic mechanism for ethanol and validated against experimental data. Rate of production analyses and sensitivity analyses were performed to better understand the reactions and species that control the autoignition of ethanol additized with EHN or DTBP. The formation and accumulation of acetaldehyde from ethanol-derived radicals is the bottleneck for ignition, since the remaining ethanol acts as a sink of the OH radicals required for the decomposition of acetaldehyde. A simple model to predict the derived cetane number of fuel blends is proposed and used to estimate the effectiveness of EHN and DTBP in improving the reactivity of ethanol. EHN works better as an additive as compared to DTBP, as it speeds up the main decomposition reactions of the fuel by providing the necessary OH radicals as compared to CH3 provided by DTBP., This work has been partially funded by Universitat Politecnica de Valencia through grant agreement "UPV -Subprograma 2 (PAID-01-22)" and through grant "Ayudas Para Movilidad de Estudiantes de Doctorado de la Universitat Polit` ecnica de Val` encia - 2022.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluación de la coloración por impregnación de tejidos de algodón con agentes auxiliares naturales

  • Martínez-González, Inés|||0000-0002-7681-2879
  • Bou-Belda, Eva|||0000-0003-1461-9296
  • Díaz-García, Pablo|||0000-0002-7093-6061
  • Capablanca, L.
[ES] La problemática que genera la baja solidez de los colorantes de bajo peso molecular despierta especial interés por buscar productos auxiliares que consigan mejorar esta característica. El quitosano y las ciclodextrinas son dos compuestos cuyo uso en la industria textil está en auge dadas sus propiedades de sorción y su origen natural. En este estudio se realizan diferentes impregnaciones de un tejido de algodón con el colorante Basic Blue 3, tanto solo como en combinación con quitosano y ciclodextrinas para comprobar si mejora su solidez al lavado. Además, se diferencia si el proceso de impregnación se realiza en un paso o en dos. Con la metodología empleada, la solidez al lavado no parece mejorar significativamente, sin embargo, sí que se observa que realizando la impregnación en una fase se obtiene mayor intensidad de color que dividiendo el procedimiento en dos fases, lo cual consigue una reducción en el tiempo y una reducción del consumo de agua en la elaboración, La autora quiere expresar su agradecimiento al Programa de Ayudas de Investigación y Desarrollo (PAID01-22) de la Universitat Politècnica de València por su contrato como investigadora predoctoral en formación.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical analysis of quad-rotor aerodynamic and aeroacoustic performance with automated trimming algorithm

  • García-Cuevas González, Luis Miguel|||0000-0001-9340-0617
  • García-Tíscar, Jorge|||0000-0003-4934-4587
  • Varela-Martínez, Pau
  • Brendan Hannu Patrick
[EN] The current work introduces a novel and affordable Computational Fluid Dynamics (CFD) methodology for the purpose of assessing the aerodynamic and aero-acoustic performance of multi-rotor systems under trimmed flight conditions. The approach couples a simple Proportional-Integral (P-I) based trim algorithm and steady state CFD solver to automate the process of determining the set of control variables that results in balanced flight conditions. The methodology¿s low computational cost is primarily achieved by including the rotors¿ effects on the flow field with actuator models. A partial validation of the rotor modeling approach in isolated hover conditions reveals slight discrepancies in the computed aerodynamic loads but good agreement with experimental results in terms of the prediction of tonal noise. The CFD procedure is subsequently applied to evaluate a quad-rotor Unmanned Aerial Vehicle¿s (UAV) performance in varied flight scenarios. The obtained results demonstrate that this automated approach effectively predicts quad-rotor performance trends, aligning with previously published data. Key findings include the fact that a hybrid over-mounted fore rotor and under-mounted aft rotor configuration negatively affects forward flight performance, and that the airframe¿s geometry and distribution around the Center of Gravity can have a significant impact on flight characteristics. Finally, comparisons between the automated trim procedure and manually imposed trim parameters in transient aero-acoustic simulations reveal a more accurate approximation of trim when using the automated method. The comparison additionally highlights the importance of simulating multi-rotor systems in physically representative flight conditions as notable differences in the UAV¿s acoustic footprint are observed between cases., The automatic trimming algorithm development was partly sponsored by grant PID2023-150573OB-I00 Design of advanced hydrogen fuel-cell powered aircraft targeting the deployment of sustainable and decarbonised air mobility (AURORA [40]) funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU and by grant TED2021-131087A-I00 Digital models for the evaluation and reduction of acoustic pollution generated by UAS in urban environments (MODERA [20]) funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. The acoustic study performed in this work was partly sponsored by grant TED2021-131087A-I00 Digital models for the evaluation and reduction of acoustic pollution generated by UAS in urban environments (MODERA [20]) funded by MCIN/AEI/10.13039- /501100011033 and by the European Union NextGenerationEU/PRTR, as well as by grant PID2022-142018OA-I00 Experimental and Numerical Optimization to Lower UAV Acoustical pollution (ENOLA [41]) funded by MCIN/AEI/10.13039/501100011033 and by ERDF, EU. The work was also partially funded by the Universitat Politècnica de València through the Grant FPI-2022-S2-85552. The authors are grateful for the computational resources provided by the Sirius Scientific Computing Cluster at UPV. The authors also wish to acknowledge Mrs. Ada García-Cuevas for christening the aircraft. The authors additionally thank Mathys Ridet, Federico Nahuel Ramírez, José ángel Jarabo Ruiz, and Daniel Velasco Pérez for their help.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Polyrotaxane-containing hydrogels for label-free detection of C-reactive protein (CRP) via diffraction gratings

  • Cubells-Gómez, Aitor|||0000-0001-6844-3439
  • Lucío, María Isabel|||0000-0001-7404-352X
  • Maquieira, Angel|||0000-0003-4641-4957
  • Bañuls Polo, María-José|||0000-0002-2422-7731
[EN] Hydrogels have been investigated as label-free (LF) holographic biosensors thanks to their ability to change the hydrogel structure when interacting with specific analytes. In this work, we report the development of hydrogelbased holographic diffraction gratings incorporating polyrotaxanes as crosslinkers and phosphorylcholine for the selective and label-free detection of C-reactive protein (CRP), which is a key biomarker for cardiovascular disease, sepsis, and inflammatory disorders. Phosphorylcholine-functionalized monomers were added to the hydrogel composition for specific CRP recognition, while methylated polyrotaxanes (PR-Met) were incorporated to enhance mechanical stability and elasticity. The materials were characterized via scanning electron microscopy (SEM), swelling studies, and mechanical compression tests, demonstrating improved robustness compared to conventional hydrogels. Fluorescence-based assays confirmed the specificity of CRP binding, and diffraction efficiency measurements enabled direct quantification with a limit of detection (LOD) of 0.3 mg L- 1. The system was successfully tested using certified human serum samples, achieving recovery rates within the clinically accepted range. This study highlights the potential of polyrotaxane-mediated mechanically enhanced hydrogels as a promising platform for biomolecular sensing, offering improved sensitivity, selectivity, and mechanical resilience for future clinical applications., This work was supported by project WEAROPSENS PID2022-140653OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by "ERDF/EU" and PROGRAMA PROMETEO 2024-CIPROM/2023/18 from Generalitat Valenciana. A. Cubells-Gomez acknowledges the FPI-UPV 2022 grant program (PAID-01-22) . The authors acknowledge the assistance and advice from the Electron Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Decoupling Formulation and Processing Effects in Thermoplastic Starch Through a Data-Driven Structure-Property Framework

  • Pavón-Vargas, Cristina Paola|||0000-0003-2902-0059
  • Llidó Barragán, Alexandra|||0009-0006-4847-8048
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Martínez-Romera, Nerea
[EN] Thermoplastic starch (TPS) is a melt-processable biopolymer whose properties depend strongly on formulation and processing. This work analyzes the combined influence of starch origin (corn, potato, rice), plasticizer system (glycerol, glycerol-triethyl citrate), and processing temperature (125 degrees C-135 degrees C) on the microstructure, mechanical, water-interaction, thermal and rheological behavior of extruded and injection-molded TPS. Potato TPS forms the strongest matrices (approximate to 2.0-3.4 MPa), corn TPS attains an intermediate strength level (approximate to 1.3-1.5 MPa), and rice TPS becomes highly ductile but less strong when plasticized with Gly-TEC (elongation approximate to 58%-82%, strength approximate to 0.5-0.8 MPa). Replacing glycerol with Gly-TEC increases ductility in all starches while shifting water uptake within a 32-59 wt.% window, decreasing it in corn and potato TPS and increasing it in rice TPS. All formulations exhibit pronounced shear-thinning, and Gly-TEC lowers melt viscosity and enhances processability. Principal component analysis and random forest modeling reveal a hierarchy among the governing parameters, decoupling formulation and processing contributions within a structure-property framework: starch origin defines the intrinsic property baseline, plasticizer composition controls the mechanical-hydrophilic response, and processing temperature fine-tunes ductility, while the model's accuracy (R 2 approximate to 0.94 for strength, 0.90 for elongation) confirms reliable TPS property prediction., This research was funded by MCIN/AEI/10.13039/501100011033 through grant PID2023-152869OB-C22 by the European Union "NextGenerationEU"/PRTR and Universitat Politecnica de Valencia (PAID-10-23, PAID-01-22). Funding for open access charge:CRUE-Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimizing the use of light in supported TiO2 photocatalysts: Relevance of the shell thickness

  • Cabezuelo-Gandia, Oscar
  • Diego-López, Ander|||0000-0001-5947-9579
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Bosca Mayans, Francisco
[EN] Heterogeneous photocatalysts have attracted significant interest over the last few years. In this sense, improved photocatalytic properties for SiO2@TiO2 materials have been correlated with higher semiconductor's specific surface area and adsorption capability. However, the reported TiO2 shell optimizations did not consider the percentage of the photo-excited electron-hole (e¿-h+) pairs occurring in the inaccessible surface of the TiO2 shell. The present study aimed to find the best TiO2 shell thickness for the optimal harvest of light. For this purpose, the sol¿gel method was modified by applying a precise humid airflow to get a uniform deposition of titania on the surface of the SiO2 particles. As a result, photocatalysts with a robust and homogeneous TiO2 shell of different thicknesses (from 14 to 42 nm) with well-defined particle size for TiO2 crystals (ca. 12 nm) were obtained. The SiO2@TiO2 materials were extensively characterized. Finally, their photocatalytic activity was evaluated against methylene blue under irradiation by UVA light. Analysis of the results revealed that the most efficient photocatalyst has a TiO2 shell thickness of ca. 30 nm. Emission and photocurrent studies also agreed with the photocatalytic results suggesting a reduced e¿-h+ recombination rate. Thereby, for the first time, the relevance of shell thickness in supported photocatalysts has been demonstrated., The authors would like to acknowledge the Spanish Ministry of Science, Innovation, and Universities (PID2019-110441RB-C33 financed by MCIN/AEI/10.13039/501100011033 and TED2021-131952B-I00 financed by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR). O. Cabezuelo and A. Diego-Lopez are indebted to the Universitat Politecnica de Valencia for the corresponding Predoctoral FPI fellowship (FPI-UPV/Subprograma 1). The authors would like to acknowledge the Servei de Microscopia Electronica from the Universitat Politecnica de Valencia (UPV) for the support on the composite characterization and sample preparation.Funding for the open access charge provided by CRUE-Universitat Politecnica de Valencia is acknowledged.r Funding for the open access charge provided by CRUE-Universitat Politècnica de València is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Activation of H2O2, PMS, and PDS over anatase TiO2-supported photocatalysts for efficient pollutant mineralization in water

  • Diego-López, Ander|||0000-0001-5947-9579
  • Tamarit-Mayo, Lorena
  • Bosca Mayans, Francisco
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Cabezuelo, Oscar
[EN] Mineralization efficiency is a key performance descriptor for heterogeneous photocatalysts in the removal of organic pollutants from water. Although the use of radical promoters can enhance the mineralization process, their effectiveness is highly dependent on the nature of the reactive species generated and, in some cases, may even lead to reduced mineralization efficiency. In this work, a supported anatase-TiO2 photocatalyst was used to investigate the mineralization of ortho-phenylphenol (OPP) under UVA irradiation in the presence of three radical promoters: H2O2, peroxymonosulfate (PMS), and peroxydisulfate (PDS). For this purpose, a core@shell SiO2@TiO2 photocatalyst was synthesized and thoroughly characterized to relate its structural and surface properties to its ability to activate these radical promoters. Notably, photocatalytic experiments showed that OPP photodegradation and total organic carbon (TOC) removal were not directly correlated, indicating that fast pollutant degradation does not necessarily imply efficient mineralization. Accordingly, only PMS significantly improved OPP mineralization efficiency of bare SiO2@TiO2, achieving a conversion of ~95¿% within 2¿h. Electron paramagnetic resonance (EPR) experiments revealed the main radicals generated in each system, providing mechanistic insights that were further corroborated by the differing reactivity of the visible-light-responsive ligand-to-metal charge-transfer (LMCT) complexes formed on the SiO2@TiO2 photocatalyst surface. This study provides valuable guidelines for future research on the characterization and design of photocatalytic systems that utilize radical promoters., The authors would like to acknowledge the Spanish Ministry of Science, Innovation, and Universities (PID2023-151872OB-I00, PID2019 110441RB-C33 and TED2021 131952B-I00, funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR). This research was supported by the CLEAN- LAGOON project (PROMETEO/CIPROM622 2024 49). Financial support by the Spanish Ministry of Science and Innovation (CEX2021 001230-S grant funded by MCIN/AEI/10.13039/ 501100011033) is gratefully acknowledged. A. Diego-Lopez and O. Cabezuelo are indebted to the Universitat Politecnica de Valencia for the corresponding Predoctoral FPI fellowship (FPI-UPV/Subprograma 1). L. Tamarit acknowledges Universitat Politecnica de Valencia for her postdoctoral contract (PAID-10-24). The authors would like to acknowledge the Servei de Microscopia Electronica from the Universitat Politecnica de Valencia (UPV) for their support in materials characterization and sample preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Carbonyl-Olefin/Alkyne Metathesis Reactions Catalyzed by Bifunctional H-USY Zeolites

  • Mingueza-Verdejo, Paloma
  • Velázquez-Ojeda, David
  • Bilanin-Artigado, Cristina
  • Garnes-Portoles, Francisco
  • Rodríguez-Nuévalos, Silvia|||0000-0002-5361-1169
  • Pérez-Ruiz, Raúl|||0000-0003-1136-3598
  • Oliver-Meseguer, Judit|||0000-0003-1555-3583
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] Metal-, organo-, and proton-catalyzed carbonyl-olefin/alkyne metathesis reactions have gained relevance in organic synthesis during the past decade, but their potential implementation in high-volume processes (i.e., in flow) is severely hampered by the lack of a general, robust, easily separable, and nontoxic solid catalyst. Both Brønsted and Lewis acid sites inside molecular-sized soluble cages seem to be involved during the catalytic process in solution; thus, a similar bifunctional acid solid catalyst, in a confined space, could play the desired catalytic role. We show here that commercially available, ultrastabilized aluminosilicate acid faujasites (H-USY zeolites), containing Brønsted and Lewis acid sites in microporous channels and cavities, catalyze a variety of intra- and intermolecular metathesis reactions between aldehydes/ketones and alkenes/alkynes, with diverse structural patterns, in reasonable yields and under mild reaction conditions. The zeolite can be easily recovered after the reaction in batch and reused or implemented in in-flow processes for continuous synthesis of the metathesis products. These results open the way to designing carbonyl¿olefin/ alkyne metathesis reactions with simple solid catalysts., Grants PID2023-148441NB-I00, PID2023-148367OB-I00, RYC2022-036154-I and Severo Ochoa program CEX2021-001230-S funded by MICIU/AEI/10.13039/501100011033 are gratefully acknowledged. The work has also been funded by Generalitat Valenciana (INNEST/2022/20 from Agencia Valenciana de la Innovació). P.M.-V. thanks ITQ, UPV-CSIC, for a contract (PAID 01-20). F.G.-P., S.R.-N., and C.B. thank Agencia Valenciana de la Innovació for a contract (INNEST/2022/20 and UCIE/2022). The authors also thank the Electron Microscopy Service of the UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Study of thermal and electrical characteristics of potential e-thermal fluids: assessment procedures and degradation effects

  • Alvis Sánchez, Jorge Andrés
[ES] Con la rápida electrificación del sector de transporte a nivel global y el crecimiento proyectado de su cuota de mercado en los próximos años, están surgiendo nuevas tecnologías que buscan mejorar la eficiencia, incrementar la seguridad, reducir costos y adaptarse a los desarrollos acelerados del sector. A medida que el mercado de vehículos eléctricos (EV) se expande, los vehículos híbridos eléctricos (HEV) y los vehículos eléctricos de batería (BEV) enfrentan demandas crecientes para optimizar la autonomía de conducción y permitir capacidades de carga rápida. Lograr estos objetivos requiere el desarrollo de soluciones avanzadas de gestión térmica capaces de mantener el rango de temperatura deseado para maximizar la eficiencia y evitar la generación excesiva de calor durante la carga rápida. En este contexto, los métodos convencionales de gestión térmica, como la refrigeración por aire o la refrigeración líquida indirecta, no cumplen con estos exigentes requisitos. Por ello, investigadores están explorando enfoques alternativos, como la refrigeración por inmersión, donde los paquetes de baterías y los componentes electrónicos se sumergen completamente en un líquido dieléctrico y refrigerante. Aunque esta tecnología ya se ha implementado en otros sectores, su desarrollo en aplicaciones automotrices sigue siendo limitado, lo que representa una oportunidad significativa para la innovación. Un componente clave de la refrigeración por inmersión son los e-fluids. El desarrollo de e-fluids adecuados para la refrigeración por inmersión en vehículos eléctricos de batería es fundamental para el avance de los futuros sistemas de gestión térmica. Estos fluidos deben poseer excelentes propiedades aislantes, un desempeño térmico robusto y una alta compatibilidad con los materiales, particularmente con el cobre. Esta tesis doctoral se centra en evaluar las características eléctricas, térmicas y de compatibilidad con el cobre, así como otras propiedades fundamentales, de 4 aceites base (aceite mineral API GIII, Polyalfaolefina, Diester y Polyolester) y 8 fluidos potencialmente formulados (C1 a C8). Adicionalmente, se analiza el impacto de la degradación durante el ciclo de vida de estos fluidos para garantizar su eficacia a largo plazo en la gestión de las demandas térmicas de las baterías de los vehículos eléctricos. La evaluación de los fluidos incluyó la medición de sus propiedades físicas, químicas, térmicas y eléctricas, así como la realización de pruebas de degradación para evaluar su durabilidad a lo largo del ciclo de vida de la batería. También se llevó a cabo una prueba de compatibilidad con el cobre, conocida como ensayo de corrosión por resistencia de hilo de cobre (CWRCT). La prueba de degradación consistió en calentar los fluidos a 150°C durante 120 horas con una tira de cobre como catalizador. La degradación eléctrica se evaluó sometiendo los fluidos a 1.000 descargas de voltaje de ruptura. La prueba CWRCT monitoreó la resistencia de un hilo de cobre en contacto con el fluido o su vapor, indicando corrosión si la resistencia aumentaba. Los resultados de estas pruebas revelaron que, entre los aceites base, la Polyalfaolefina y el Polyolester mostraron las características más favorables para las formulaciones de e-fluids. Además, entre los fluidos formulados, los candidatos C4 y C7 demostraron el mejor desempeño general, posicionándolos como las opciones más prometedoras para la refrigeración por inmersión en vehículos eléctricos de batería., [CA] Amb la ràpida electrificació del sector del transport a nivell global i el creixement projectat de la seva quota de mercat en els pròxims anys, estan sorgint noves tecnologies que busquen millorar l'eficiència, incrementar la seguretat, reduir costos i adaptar-se als desenvolupaments accelerats del sector. A mesura que el mercat de vehicles elèctrics (EV) s'expandeix, els vehicles híbrids elèctrics (HEV) i els vehicles elèctrics de bateria (BEV) s'enfronten a demandes creixents per optimitzar l'autonomia de conducció i permetre capacitats de càrrega ràpida. Aconseguir aquests objectius requereix el desenvolupament de solucions avançades de gestió tèrmica capaces de mantenir el rang de temperatura desitjat per maximitzar l'eficiència i evitar la generació excessiva de calor durant la càrrega ràpida. En aquest context, els mètodes convencionals de gestió tèrmica, com la refrigeració per aire o la refrigeració líquida indirecta, no compleixen aquests exigents requisits. Per això, els investigadors estan explorant enfocaments alternatius, com ara la refrigeració per immersió, on els paquets de bateries i els components electrònics se submergeixen completament en un líquid dielèctric i refrigerant. Tot i que aquesta tecnologia ja s'ha implementat en altres sectors, el seu desenvolupament en aplicacions automobilístiques continua sent limitat, fet que representa una oportunitat significativa per a la innovació. Un component clau de la refrigeració per immersió són els e-fluids. El desenvolupament d'e-fluids adequats per a la refrigeració per immersió en vehicles elèctrics de bateria és fonamental per al progrés dels futurs sistemes de gestió tèrmica. Aquests fluids han de presentar excel·lents propietats aïllants, un rendiment tèrmic robust i una alta compatibilitat amb els materials, especialment amb el coure. Aquesta tesi doctoral se centra a avaluar les característiques elèctriques, tèrmiques i de compatibilitat amb el coure, així com altres propietats fonamentals, de 4 olis base (oli mineral API GIII, Polialfaolefina, Dièster i Polièster) i 8 fluids potencialment formulats (C1 a C8). Addicionalment, s'analitza l'impacte de la degradació durant el cicle de vida d'aquests fluids per garantir la seva eficàcia a llarg termini en la gestió de les demandes tèrmiques de les bateries dels vehicles elèctrics. L'avaluació dels fluids va incloure la mesura de les seves propietats físiques, químiques, tèrmiques i elèctriques, així com la realització de proves de degradació per avaluar la seva durabilitat al llarg del cicle de vida de la bateria. També es va dur a terme una prova de compatibilitat amb el coure, coneguda com a assaig de corrosió per resistència del fil de coure (CWRCT). La prova de degradació va consistir a escalfar els fluids a 150 °C durant 120 hores amb una tira de coure com a catalitzador. La degradació elèctrica es va avaluar sotmetent els fluids a 1.000 descàrregues de tensió de trencament. La prova CWRCT va monitorar la resistència d'un fil de coure en contacte amb el fluid o el seu vapor, indicant corrosió si la resistència augmentava. Els resultats d'aquestes proves van revelar que, entre els olis base, la Polialfaolefina i el Polièster van mostrar les característiques més favorables per a les formulacions d'e-fluids. A més, entre els fluids formulats, els candidats C4 i C7 van demostrar el millor rendiment general, posicionant-se com les opcions més prometedores per a la refrigeració per immersió en vehicles elèctrics de bateria., [EN] With the rapid electrification of the global transport sector and the projected growth in market share over the coming years, new technologies are emerging to enhance efficiency, improve safety, and reduce costs in response to rapidly evolving developments. As the electric vehicle (EV) market experiences significant growth, hybrid electric vehicles (HEVs) and battery electric vehicles (BEVs) are facing increasing demands to optimize driving range and enable fast charging capabilities. Achieving these objectives necessitates the development of advanced thermal management solutions capable of maintaining the desired temperature range to maximize efficiency and prevent excessive heat generation during fast charging. In this context, conventional thermal management methods such as air cooling and indirect liquid cooling fall short of meeting these stringent requirements. As a result, researchers are exploring alternative approaches, including immersion cooling, in which battery packs and power electronics are fully submerged in a dielectric liquid with cooling capabilities. While this technology has already been implemented in other industries, it remains underdeveloped for automotive applications, thereby highlighting a significant opportunity for innovation. A critical component of immersion cooling is the refrigerant, which is referred to as an e-thermal fluid. The development of suitable e-thermal fluids for immersion cooling in battery electric vehicles is imperative for the advancement of future thermal management systems. These fluids must exhibit excellent insulating properties, robust thermal performance, and strong material compatibility, particularly with components like copper. This PhD thesis focuses on evaluating the electrical, thermal, and copper compatibility characteristics, as well as other fundamental properties, of 4 base oils (API GIII mineral oil, polyalphaolefin, diester, and polyolester) and 8 potential fully formulated fluids (C1 to C8). Additionally, the research investigates the impact of degradation over the life cycle of these fluids to ensure their long-term effectiveness in managing the thermal demands of electric vehicle batteries. The evaluation of the fluids involved measuring their physical, chemical, thermal, and electrical properties, as well as conducting degradation tests to assess their durability over the battery's lifecycle. A copper compatibility test, known as the Copper Wire Resistance Corrosion Test (CWRCT), was also performed. The degradation test involved heating the fluids at 150°C for 120 hours with a copper strip serving as a catalyst. Electrical degradation was assessed by subjecting the fluids to 1,000 breakdown voltage discharges. The CWRCT monitored the resistance of a copper wire in contact with the fluid or its vapor, with any increase in resistance indicating corrosion. The results of these tests revealed that, among the base oils, polyalphaolefin and polyolester exhibited the most favorable characteristics for e-thermal fluid formulations. Furthermore, among the formulated candidates, fluids C4 and C7 demonstrated the best overall performance, making them the most promising options for immersion cooling in battery electric vehicles., The author would like to sincerely acknowledge the funding support provided by “Programa de Apoyo para la Investigación y Desarrollo” (PAID-01-22) at Universitat Politècnica de València. Additionally the author would also acknowledge the support and partial funding of projectCIAICO/2021/013 from GVA, Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Mejora del proceso de coloración para la obtención de textiles biocidas

  • Martínez-González, Inés|||0000-0002-7681-2879
[ES] La presente tesis doctoral se centra en el desarrollo, optimización y evaluación de procesos de coloración textil para obtener tejidos fotoactivos con funcionalidad biocida. El trabajo parte de la hipótesis de que determinados fotosensibilizadores, además de aportar color, pueden incorporarse a sustratos textiles mediante procesos convencionales de tintura y acabado, generando materiales capaces de producir especies reactivas de oxígeno bajo luz visible y reducir la carga microbiana. Se estudiaron tres compuestos fotoactivos de distinta naturaleza iónica: Azul de Metileno (MB), Rosa de Bengala (RB) y Riboflavina (RF), aplicados sobre tejidos de algodón y poliamida por su interés en aplicaciones textiles y sanitarias. En los tejidos tratados se evaluaron la solidez del color, el comportamiento fotofísico, la morfología superficial y la actividad antimicrobiana frente a distintos modelos microbiológicos. Inicialmente se caracterizó el comportamiento de los fotosensibilizadores en condiciones de tintura. La RB mostró halocromía, mientras que el MB presentó cambios espectrales y cromáticos en condiciones de pH muy alcalino y temperatura elevada, asociados a su inestabilidad química. Estos resultados permitieron establecer protocolos de medida adecuados para evitar errores en la determinación espectrofotométrica de la concentración. La aplicación de RB sobre poliamida permitió obtener materiales fotoactivos mediante un proceso de tintura convencional, compatible con tecnologías industriales. La incorporación de un fijador catiónico comercial mejoró la solidez y modificó la interacción entre tejido, fotosensibilizador y microorganismos. Los tejidos desarrollados mostraron elevada eficacia antimicrobiana bajo luz visible frente a bacterias Gram-positivas y Gram-negativas, hongos y virus, demostrando el potencial de la tintura convencional como vía sencilla y escalable para producir textiles fotodinámicos. En algodón, la incorporación de MB resultó más compleja por su baja afinidad por la celulosa y su limitada solidez al lavado. Por ello, se evaluaron distintas condiciones de tintura y pretratamientos superficiales, incluidos quitosano, ácido tánico y polietilenimina. El quitosano favoreció la actividad antibacteriana fotoactivada, especialmente a bajas concentraciones de MB y pH 6, mientras que el ácido tánico proporcionó mejores resultados de agotamiento y solidez. Esta comparación evidenció que maximizar la solidez del color no siempre coincide con maximizar la eficacia fotodinámica. Además, el estudio de fijadores comerciales mostró que el aniónico fue el más eficaz para mejorar la solidez, aunque sin una mejora sustancial respecto al catiónico. La estrategia más prometedora fue la obtención de un tejido multifuncional de algodón mediante la incorporación secuencial de MB y RB en una estructura multicapa. Este método permitió combinar fotosensibilizadores de distinta naturaleza, ampliar la absorción de luz visible y mejorar la actividad biocida. El tejido mostró elevada eficacia frente a bacterias, hongos y virus, mantuvo una notable actividad antibacteriana tras lavados repetidos y fue validado en un entorno hospitalario real, donde evidenció reducción microbiana. Finalmente, se evaluó la incorporación de RF como compuesto fotoactivo de origen natural. Aunque su actividad antibacteriana individual fue limitada en las condiciones estudiadas, permitió modular la tonalidad final de los tejidos basados en MB y RB, aportando una funcionalidad óptica complementaria. En conjunto, esta tesis demuestra que la adaptación de procesos textiles convencionales mediante fotosensibilizadores permite obtener tejidos coloreados con funcionalidad biocida fotoactivada. Los resultados contribuyen al desarrollo de textiles funcionales para aplicaciones sanitarias, especialmente orientados a la prevención de contagios.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Deep Learning algorithm, based on convolutional neural networks, for equivalent electrical circuit recommendation for Electrochemical Impedance Spectroscopy

  • Sáez-Pardo, Fermín|||0009-0000-0759-6781
  • Giner-Sanz, Juan José|||0000-0003-0441-6102
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
[EN] Electrochemical Impedance Spectroscopy (EIS) is a technique widely used in the field of electrochemistry, due to its ability to probe the dynamics of electrochemical systems. Commonly, EIS spectra are analysed using Equivalent Electrical Circuits (EECs). The EEC selection is not trivial. For this reason, Digby D. Macdonald proposed the Electrochemical Genome Project, which would consist of a large database of EIS spectra and an Artificial Intelligence able to recommend EECs given an experimental EIS spectrum. In this work, we developed a Deep Learning algorithm, based on Convolutional Neural Networks (CNNs), for EEC recommendation for EIS spectra. To achieve this, we optimized the CNN in 3 sequential stages: first, the convolutional architecture was optimized; then, the Initial Learn Rate was selected; and finally, the dense network architecture was optimized. At the end of this process, we obtained a CNN model with a maximum test accuracy of 61.11 %. The obtained results show that CNNs are good candidates for EEC recommendation tools for EIS spectra., This work was funded by an "Ayuda a Primeros Proyectos de Investigacion" project (PAID-06-23) of the research vice-rectorate of Universitat Politecnica de Valencia and the Grant PID2023-147511OB-C21 funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU. F.S.P. acknowledges the support of Universitat Politecnica de Valencia through a predoctoral fellowship (PAID-01-22) . J.J.G.S. is very grateful to the Ministerio de Ciencia e Innovacion, to the Next Generation EU, and to the Agencia Estatal de Investigacion, for their support by a Juan de la Cierva-Incorporacion fellowship (IJC2020-044087-I) funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. Authors thank Universitat Politecnica de Valencia for funding for open access charge (PAID-12-25) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Copper Wire Resistance Corrosion Test for Assessing Copper Compatibility of E-Thermal Fluids for Battery Electric Vehicles (BEVs)

  • Tormos, B.|||0000-0002-8852-3783
  • Ruiz-Rosales, Santiago|||0000-0001-9536-3696
  • Alvis-Sanchez, Jorge
  • Farfan-Cabrera, Leonardo Israel
[EN] This study aims to assess the compatibility of various e-thermal fluids for immersion cooling in battery electric vehicles through a copper wire resistance corrosion test. The tested fluids include a polyalphaolefin, diester, mineral oil API G-III, transformer oil, and a fully formulated dielectric coolant. The test was conducted at 130 degrees C for 336 h, and the resistance of the copper wires was monitored in vapor and oil phases. By comparing the resistance variation and analyzing portions of the wires through scanning electron microscopy, it was found that the vapor phase of PAO and diester in one of the tests exhibited significant corrosion, while the dielectric coolant showed minimal corrosive effects, implying better compatibility. These results provide insights into the corrosion behavior and compatibility of the fluids with copper, which are essential for selecting suitable dielectric fluids for immersion cooling applications in electric vehicles., This research was partly funded by project CIAICO/2021/013 from GVA, Generalitat Valenciana. The authors also want to acknowledge "Programa de Apoyo para la Investigacion y Desarrollo" (PAID-01-22) for financing the PhD. studies of J. Alvis-Sanchez at Universitat Politecnica de Valencia. L.I.F.-C. acknowledges the financial support given by Tecnologico de Monterrey within the challenge-based research project IJST070-23EG68001 (call 2023) to partially fund this research work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Statistical benchmarking of chloride and sulphate posolytes for all-iron redox flow batteries

  • Cifre-Herrando, Mireia|||0000-0002-8800-3585
  • C. Escoms-Espert
  • Sáez-Pardo, Fermín|||0009-0000-0759-6781
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • Giner-Sanz, Juan José|||0000-0003-0441-6102
[EN] All-iron Redox Flow Batteries (AIRFBs) are promising large-scale energy storage systems due to their low cost and chemical symmetry. However, their performance is largely limited by the slow kinetics of the Fe3+|Fe2+ redox couple in the posolyte, and the posolyte's stability window. A good electrolyte for AIRFBs must combine fast and reversible charge-transfer kinetics, high selectivity toward the Fe3+|Fe2+ reaction, high ionic conductivity, and efficient mass transport. This study systematically investigates how the electrolyte type (chloride and sulphate) and acidity affect the key electrochemical parameters of the Fe3+|Fe2+ redox couple, namely the standard heterogenous rate constant (¿0), the charge transfer coefficient (¿), the diffusion coefficient (¿), and the conductivity (¿). A multifactorial experimental design was employed, and an ANalysis Of VAriance (ANOVA) was used to identify the statistically significant effects of both factors and their interaction on the aforementioned electrochemical parameters. The ANOVA results show a statistically significant difference in the charge-transfer process between chloride- and sulphate-based electrolytes: the electrolyte type primarily controls electron-transfer kinetics, with chloride medium markedly enhancing ¿0; while acid concentration mainly affects ¿ and ¿. Among the tested formulations, 1 M HCl exhibited the best compromise between Fe3+|Fe2+ kinetics, mass transport, and an adequate stability window. These insights provide a quantitative basis for electrolyte optimization and support the rational design of improved AIRFB posolytes., This work was funded by an Ayuda a Primeros Proyectos de Investigacion project (PAID-06 23) of the research vice-rectorate of Universitat Politecnica de Valencia and the Grant PID2023-147511OBC21 funded by MICIU/AEI/10.13039/ 501100011033 997 and by ERDF/EU. M.C.H is grateful to UPV for the post-doctoral grant (PAID10 24). F.S.P. acknowledges the support of Universitat Politecnica de Valencia through a predoctoral fellowship (PAID-01 22). J.J.G.S. is very grateful to the Ministerio de Ciencia e Innovacion, to the Next Generation EU, and to the Agencia Estatal de Investigacion, for their support by a Juan de la Cierva-Incorporacion fellowship (IJC2020-044087-I) funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. The Article Processing Charges (APCs) were covered by the transformative agreements between CRUE Universitat Politecnica de Valencia and Elsevier.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of hemicellulose and lignin on the fibrillation efficiency and properties of cellulose nanofibrils from native and oxidized Eucalyptus nitens and Pinus radiata pulps

  • Albornoz-Palma, Gregory Piero Horacio|||0000-0002-1194-976X
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • Henríquez-Gallegos, Sergio
  • Ortega-Sanhueza, Isidora
  • Pereira, Miguel
[EN] Comprehending how raw materials, pretreatments, and treatments affect the properties of cellulose nanofibrils (CNFs) is crucial for their use. This study aims to understand the effect that alkaline treatment has on the characteristics of pulps, the mechanical processes of CNF production, and the characteristics of CNFs from Pinus radiata and Eucalyptus nitens pulps with native and oxidized lignin. For this purpose, Pinus radiata and Eucalyptus nitens pulps with different lignin contents produced by oxidative pretreatment were used as raw material. From these, pulps with different hemicellulose and lignin contents were produced by alkaline treatment. Furthermore, CNFs were prepared by refining and homogenization processes. The chemical composition analysis of pulps containing native lignin, before and after alkaline treatment, revealed distinct behaviors of hemicellulose. In Pinus radiata pulp, hemicellulose remained insoluble under alkaline conditions. In contrast, the hemicellulose from Eucalyptus nitens pulp was partially soluble. Morphological characteristics of CNFs revealed that removing 41.8% of total hemicellulose by alkaline treatment promoted the mechanical fibrillation of Eucalyptus nitens pulp with native lignin, decreasing the average width by 30%. Furthermore, a very low lignin content in this species (~ 1.3%) hindered the mechanical fibrillation of fibers. Finally, the dielectric spectra of CNFs showed that the alkaline treatment increased the activation energies of the relaxations associated with the molecular motions of the hemicellulose and lignin groups, evidencing changes in their structures. These changes were related to the deacetylation of hemicellulose, and the deprotonation of hydroxy groups and the formation of carboxyl groups in lignin., The experimental activities carried out at the Universitat Politecnica de Valencia have been funded by the Spanish Ministry of Science and Innovation for the research Project POLYELMETH (PID2020-116322RB-C31) and Grant PAID-01-22 SUB. The experimental activities carried out at the Universidad de Concepcion have been funded by the Agencia Nacional de Investigacion y Desarrollo (ANID) under Grant No. FB210015 (CENAMAD).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Holographic Surface Relief Diffraction gratings made of hydrogels for direct label-free biosensing of IgGs

  • Cubells-Gómez, Aitor|||0000-0001-6844-3439
  • Lucío, María Isabel|||0000-0001-7404-352X
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] This work describes the development of a label-free (LF) biosensing platform for the direct detection of targets based on diffractive structures fabricated with acrylamide-based hydrogels biofunctionalized with proteins and antibodies. Hydrogels containing Bovine Serum Albumin protein (BSA) with different crosslinking degrees were synthesized and characterized to find the optimal conditions for the suitable fabrication of surface relief gratings (SRGs). The bioavailability of BSA-functionalized hydrogels for the specific recognition of anti-BSA antibodies was verified by fluorescence detection. After the hydrogel-based SRG fabrication, diffraction efficiency measures at two different laser wavelengths were used for the direct LF detection of anti-BSA antibodies. The limit of detection in the sub mg L-1 range was read. Additionally, SRGs were prepared with hydrogels biofunctionalized with anti-rabbit antibodies for the direct detection of IgGs from rabbit serum, obtaining similar analytical performance without the necessity of labeling or applying amplification strategies., This work was supported by project ADBIHOL PID2019-110713RB-I00 funded by MICIU/AEI/10.13039/501100011033, project WEAR-OPSENS PID2022-140653OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by "ERDF/EU", and PROMETEO/2020/094 from Generalitat Valenciana. M. I. Lucio acknowledges MINECO for her Juan de la Cierva Incorporacion grant (IJC 2018-035355-I) . A. Cubells-Gomez acknowledges the FPI-UPV 2022 grant program (PAID-01-22) . The authors acknowledge the assistance and advice from the Electron Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Estudio con simulaciones Monte Carlo del espectro de neutrones en una sala de tratamiento de protonterapia

  • Díaz-Comeche, A.
  • Oliver-Gil, Sandra|||0000-0001-8258-3972
  • Juste-Vidal, Belen-Jeanne|||0000-0003-1978-3765
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[ES] La protonterapia es una técnica radioterapéutica que consiste en acelerar protones hasta energías de entre 70 y 250 MeV. Su principal ventaja frente a las terapias que emplean fotones o electrones es que la dosis radiactiva se deposita de manera más localizada, por lo que aparecen menos efectos secundarios. Durante este proceso se generan neutrones con energías de hasta 230 MeV, como producto de reacciones (p,n) en el cabezal del acelerador. Estos neutrones contribuyen a la dosis recibida por el paciente, pero normalmente no se tienen en cuenta al planificar el tratamiento. Determinar el espectro energético de los neutrones es fundamental debido a que la dosis que depositan depende, en mayor medida, de su energía. En este trabajo se ha empleado un algoritmo MLEM (Maximum Likelihood Expectation-Maximization) para determinar el espectro neutrónico producido en un cabezal de protonterapia. Dicho espectro se ha reconstruido a partir de simulaciones Monte Carlo en MCNP6.3 que recrean las medidas obtenidas por un espectrómetro de esferas Bonner situado en la salida del cabezal. Las simulaciones Monte Carlo realizadas sirven como primer paso para la medición de un espectro de neutrones experimental en una instalación de protonterapia, así como para la futura validación de modelos que intenten representar las condiciones propias de dichas instalaciones. El espectro obtenido mediante el procedimiento descrito se ajusta al proporcionado por otros trabajos publicados previamente, en los cuales también se han empleado métodos de Monte Carlo. Así, queda demostrada la fiabilidad de la metodología seguida. Se ha estudiado también la variación del espectro resultado de cambiar los parámetros de entrada del algoritmo MLEM, determinando los más eficaces para reconstrucción de espectros de estas características. Así, con este trabajo se abre la puerta a futuras investigaciones en el área de la protonterapia, técnica de especial interés y que ha experimentado un gran auge en los últimos años.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of the ducted fuel injection concept for medium duty engines and multi-hole nozzles: An optical analysis

  • Pastor, José V.|||0000-0003-4113-4681
  • Micó, Carlos|||0000-0001-5787-6212
  • De Vargas Lewiski, Felipe
  • Khalid, Usama Bin
[EN] Ducted Fuel Injection (DFI) is a strategy still in development, which has proved to be effective in reducing soot emissions in compression ignition engines. It works by driving the spray, formed by a high-pressure fuel injection, through a small duct co-axial to the spray itself, which is expected to affect the mixture formation and combustion process, in turn leading to noticeable reduction in soot formation. This strategy has been mostly deployed in spray vessels or in some cases in heavy duty engines consisting of mostly 2-to-4-hole nozzle injectors. For this reason, the work here is aimed to study the potential of DFI in a medium-duty single-cylinder optical engine fueled with conventional diesel having an 8-hole nozzle injector. Two different optical techniques including OH* chemiluminescence and 2-color pyrometry have been utilized to perform the analysis regarding combustion evolution and soot formation. A parametric analysis regarding different geometrical parameters including stand-off distance, diameter and length of duct has been carried out regarding the DFI performance. Results indicate that DFI does decrease the soot emissions in the context of this study and the duct geometrical parameters influence combustion evolution and soot formation ultimately affecting the device's performance. However, the scale of soot reduction is not as high as reported in previous studies, which is limited by specific boundary conditions including combustion chamber design, piston geometry utilized in this study., This work has been partially funded by Universitat Politecnica de Valencia through grant agreement UPV Subprograma 2 (PAID-01-22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Selective cycloaddition of ethylene oxide to CO2 within the confined space of an amino acid-based metal-organic framework

  • Bilanin-Artigado, Cristina
  • Escamilla, Paula
  • Ferrando-Soria, Jesus
  • Armentano, Donatella
  • Pardo, Emilio
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] Host-guest chemistry within the confined space of metal-organic frameworks (MOFs) offers an almost unlimited myriad of possibilities, hardly accessible with other materials. Here we report the synthesis and physical characterization, with atomic resolution by single-crystal X-ray diffraction, of a novel water-stable tridimensional MOF, derived from the amino acid S-methyl-l-cysteine, {SrZn6[(S,S)-Mecysmox](3)(OH)(2)(H2O)}9H(2)O (1), and its application as a robust and efficient solid catalyst for the cycloaddition reaction of ethylene/propylene oxide with CO2 to afford ethylene/propylene carbonate with yields of up to 95% and selectivity of up to 100%. These results nicely illustrate the great potential of MOFs to be game changers for the selective synthesis of industrially relevant products, representing a powerful alternative to the current heterogeneous catalysts., We acknowledge MCIN (PID2019-104778GB-I00, PID2020-115100GB-I00, CEX2019-000919-M and CEX2021-001230-S), the Generalitat Valenciana (SEJI/2020/034 and PROMETEO/2021/054), the Ministero dell'Istruzione, dell'Università e della Ricerca and the Fondazione CARIPLO (2019 2090). E. P. acknowledges the financial support from the European Research Council under the European Union's Horizon 2020 Research and Innovation Programme/ERC Grant Agreement No. 814804, MOF-reactors. D. A. also acknowledges the financial support from the European Union NextGenerationEU under the National Recovery and Resilience Plan (NRRP) of Ministero dell'Università e della Ricerca (MUR) (Project Code PE0000021, Network 4 Energy Sustainable Transition NEST). C. B. thanks ITQ for a contract. C. B. thanks ITQ and UPV (PAID-01-22) for a contract. J. F.-S. thanks the Ramón y Cajal program (RYC2019-027940-I). This study forms part of the Advanced Materials programme (MFA/2022/048) and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Methodology for the assessment of the risk of failure of metastatic vertebrae through ROM-based patient-specific simulations

  • García-Andrés, Francesc Xavier
  • Arana Fernandez de Moya, Estanislao
  • Nadal, Enrique|||0000-0002-2808-298X
  • Gandía-Vañó, Blai|||0000-0001-7243-624X
  • Ródenas, Juan José|||0000-0003-2195-7920
[EN] The structural performance of a vertebra can be significantly undermined if it develops a tumour, that could even lead to the vertebra's structural collapse. In cancers with a high prevalence of spinal metastasis, like prostate and breast cancer, this supposes an additional problem to account for on top of the regular treatment. In this work, we propose a patient-specific methodology capable of immediately predicting the structural behaviour and risk of failure of a vertebra with a spherical tumour of arbitrary characteristics. This immediate evaluation of the results, together with the ease of use of the proposed methodology, that includes the creation of a personalized computational model from a CT scan of the patient's vertebra, makes this methodology suitable for its use in clinical practice. By running several personalized structural analyses of vertebrae with simulated tumours, using the Cartesian grid FEM (cgFEM) in combination with the Sparse Subspace Learning (SSL) technique, we generate a surrogate model of the vertebra. This model is able to predict the vertebra's behaviour for different tumour growth scenarios, and could be useful as a clinical decision support tool., The authors gratefully acknowledge the financial support of the Agencia Estatal de Investigación (PEJ2018-003672-A-AR), Generalitat Valenciana (Prometeo/2021/046), Ministerio de Universidades, Universitat Politècnica de València and European Union-Next generation EU (Margarita Salas, MS/35), Vicerrectorado de Investigación de la Universitat Politècnica de València (PAID-11-22) and Universitat Politècnica de València for the Programa de Ayudas de Investigación y Desarrollo (PAID-01-22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of hydrogen substitution for stable lean operation on spark ignition engines fueled by compressed natural gas

  • Molina, Santiago|||0000-0001-7879-2421
  • Ruiz-Rosales, Santiago|||0000-0001-9536-3696
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
  • Olcina-Girona, Miguel
[EN] Compressed Natural Gas (CNG) appears as a midterm solution to conventional fuels, such as gasoline and diesel. The low carbon content and the possibility of being obtained from renewable sources (animal or agriculture waste, landfills, waste of the industry food or aquatic biomass) make CNG an attractive option to reduce Greenhouse Gases (GHG) emission. Applying lean combustion strategies on CNG improves efficiency levels while reducing pollutant emissions. In these conditions, heat transfer losses are reduced, and the thermal efficiency increased, especially at partial loads where increasing air dilution is one of the main strategies to reduce pumping losses. Hydrogen (H2) addition helps to enhance combustion in these diluted conditions and to reduce the combustion instability. This combustion concept has been widely studied over the last years, however further research is still needed. This investigation focuses on how hydrogen substitution affects the performance and emissions (both CO2 and pollutant) of a port fuel injection (PFI) spark ignition (SI) engine fueled by CNG. Thus, the main objective of this investigation is to contribute to the existent knowledge about dual-fuel combustion strategies based on CNG and H2 blends. Results demonstrated that hydrogen substitution helps to reduce the CO2 emissions by two ways: improving the engine efficiency and substituting part of the main carbon-based fuel. Despite of this advantage, NOx emissions are not reduced, and they will require after-treatment systems to deal with current pollutant regulations., This research has been partially funded by FEDER, Spain and the Spanish Government through project RTI2018-102025-B-I00 (CLEANFUEL). M. Olcina-Girona is partly supported by an FPI contract (FPI S2-22-37816) of the Programa de Apoyo para la Investigacion y Desarrollo (PAID 01 22) of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

A Numerical and Experimental Analysis of Battery Thermal Runaway Phenomena to Enhance the Development of Hybrid and Electric Vehicles

  • Golke, Diego
[ES] Los efectos del calentamiento global son evidentes hoy en día debido al aumento de la intensidad de las catástrofes ambientales que ocurren en todo el mundo. Las fuentes de energía limpias y renovables son fundamentales para mitigar este fenómeno y reducir las emisiones de CO¿. En este contexto, las baterías de iones de litio son esenciales, ya que pueden mejorar los sistemas de almacenamiento de energía al minimizar los problemas de producción intermitente y promover sistemas de propulsión limpia, como los trenes motrices híbridos y eléctricos. Sin embargo, las baterías aún presentan algunas limitaciones, como la densidad de energía limitada y la necesidad de carga rápida para garantizar su aplicación a gran escala. Además, a medida que se logran avances en densidad de energía y carga rápida, han surgido preocupaciones sobre la seguridad en relación con problemas térmicos que pueden derivar en fuga térmica (TR). Por esta razón, la presente tesis se centra en comprender la variabilidad entre celdas mediante el análisis de la liberación de calor tanto de las principales reacciones en cadena como de la celda en su conjunto, utilizando modelado electroquímico y técnicas ópticas. Se propone un modelo de TR para predecir el comportamiento térmico en condiciones de abuso bajo diferentes estados de la batería. Las baterías fueron caracterizadas eléctricamente y modeladas utilizando un enfoque P2D en condiciones tanto prístinas como envejecidas, y se estudió su impacto en la autonomía del vehículo. Con los datos del modelo, se evaluó la influencia de los diferentes componentes de la batería a través de reacciones escalonadas para predecir el comportamiento de la fuga térmica. Las baterías fueron ensayadas en un sistema ARC acoplado con técnicas ópticas bajo activaciones térmicas y mecánicas para evaluar la variabilidad entre celdas mediante análisis estadístico. Finalmente, se propuso un modelo basado en el comportamiento de la batería, considerando diferentes parámetros de entrada, como el estado de carga (SOC), el estado de salud (SOH) y la densidad de energía. Los resultados muestran que la masa final de la batería desempeña un papel significativo en la determinación de la temperatura máxima en la superficie de la batería. Una mayor masa puede almacenar más energía y transferir calor a través de la carcasa de la batería. Este efecto explica por qué baterías con diferentes niveles de SOC y SOH pueden alcanzar temperaturas similares. En el caso de la penetración por clavo como activación, las rupturas laterales y la combustión localizada llevaron a mediciones de temperatura engañosas, como se demostró mediante las técnicas ópticas y el análisis estadístico aplicados. Se desarrolló un modelo basado en los resultados de esta tesis, que predice el comportamiento de la fuga térmica al considerar diferentes condiciones de la batería y la masa atrapada durante el evento. Además, se debe considerar como parámetro de entrada la velocidad de aumento de temperatura en la temperatura de inicio del proceso exotérmico, ya que varía respecto a los valores originales dependiendo de las limitaciones del sistema experimental. El principal efecto de este parámetro es influir en la duración del proceso de fuga térmica en condiciones adiabáticas., [CA] Els efectes de l'escalfament global són evidents hui en dia a causa de la creixent intensitat de les catàstrofes ambientals que ocorren arreu del món. Les fonts d'energia netes i renovables són fonamentals per a mitigar aquest fenomen i reduir les emissions de CO¿. En aquest context, les bateries d'ions de liti són essencials, ja que poden millorar els sistemes d'emmagatzematge d'energia en minimitzar els problemes de producció intermitent i impulsar sistemes de propulsió neta, com els trens de potència híbrids i elèctrics. Tanmateix, les bateries encara presenten algunes limitacions, com la densitat energètica limitada i la necessitat de càrrega ràpida per a garantir la seua aplicació a gran escala. A més, a mesura que s'aconsegueixen avanços en densitat energètica i càrrega ràpida, han sorgit preocupacions sobre la seguretat en relació amb problemes tèrmics que poden derivar en fuga tèrmica (TR). Per aquesta raó, la present tesi se centra a comprendre la variabilitat entre cel·les mitjançant l'anàlisi de l'alliberament de calor tant de les principals reaccions en cadena com de la cel·la en el seu conjunt, utilitzant modelatge electroquímic i tècniques òptiques. Es proposa un model de TR per a predir el comportament tèrmic en condicions d'abús sota diferents estats de la bateria. Les bateries van ser caracteritzades elèctricament i modelades utilitzant un enfocament P2D en condicions tant prístines com envellides, i es va estudiar el seu impacte en l'autonomia del vehicle. Amb les dades del model, es va avaluar la influència dels diferents components de la bateria a través de reaccions escalonades per a predir el comportament de la fuga tèrmica. Les bateries van ser assajades en un sistema ARC acoblat amb tècniques òptiques sota activacions tèrmiques i mecàniques per a avaluar la variabilitat entre cel·les mitjançant anàlisi estadística. Finalment, es va proposar un model basat en el comportament de la bateria, considerant diferents paràmetres d'entrada, com l'estat de càrrega (SOC), l'estat de salut (SOH) i la densitat energètica. Els resultats mostren que la massa final de la bateria té un paper significatiu en la determinació de la temperatura màxima en la superfície de la bateria. Una massa major pot emmagatzemar més energia i transferir calor a través de la carcassa de la bateria. Aquest efecte explica per què bateries amb diferents nivells de SOC i SOH poden assolir temperatures similars. En el cas de la penetració per clau com a activació, les ruptures laterals i la combustió localitzada van donar lloc a mesures de temperatura enganyoses, com es va demostrar mitjançant les tècniques òptiques i l'anàlisi estadística aplicades. Es va desenvolupar un model basat en les troballes d'aquesta tesi, que prediu correctament el comportament de la fuga tèrmica en considerar diferents condicions de la bateria i la massa atrapada durant l'esdeveniment. A més, cal considerar com a paràmetre d'entrada la velocitat d'augment de temperatura en la temperatura d'inici del procés exotèrmic, ja que varia respecte als valors originals depenent de les limitacions del sistema experimental. L'efecte principal d'aquest paràmetre és influir en la duració del procés de fuga tèrmica en condicions adiabàtiques., [EN] The effects of global warming are evident nowadays due to the increasing intensity of environmental catastrophes occurring worldwide. Clean and renewable energy sources are crucial for mitigating this phenomenon in order to reduce CO¿ emissions. In this context, lithium-ion batteries are essential as they can enhance energy storage systems by minimising intermittent energy production problems and spreading clean propulsion systems such as hybrid and electric powertrains. However, batteries still face some drawbacks, such as limited energy density and the need for fast charging to ensure widespread applicability. Moreover, as advancements in energy density and fast charging are achieved, safety concerns regarding thermal issues that can lead to thermal runaway (TR) have been raised. For this reason, the present thesis focuses on understanding cell-to-cell variability by analysing heat release from both the main chain reactions and the entire cell using electrochemical modelling and optical techniques. A TR model is proposed to predict abuse thermal behaviour under different battery conditions. Batteries were electrically characterised and modelled using a P2D approach in both pristine and aged conditions, and their impact on vehicle range was studied. Using data from the model, the influence of different battery components was evaluated through stepwise reactions to predict thermal runaway behaviour. The batteries were tested using an ARC system coupled with optical techniques under thermal and mechanical triggers to assess cell-to-cell variability through statistical analysis. Finally, a model was proposed based on battery behaviour, considering different inputs such as state of charge (SOC), state of health (SOH), and energy density. The results show that the final battery mass plays a significant role in determining the maximum surface temperature of the battery. A higher mass can store more energy and transfer heat through the battery casing. This effect explains why batteries with different SOC and SOH levels can reach similar temperatures. In the case of nail penetration as a trigger, lateral ruptures and local combustion led to misleading temperature measurements, as demonstrated by the applied optical techniques and statistical analysis. A model was developed based on the findings of this thesis, correctly predicting thermal runaway behaviour while accounting for different battery conditions and the mass trapped during the event. Additionally, the temperature rise rate at the onset temperature of the exothermic process needs to be considered as a model input. The reason is that it varies from the original settings, depending on the experimental setup constraints. The main effect of this parameter is to influence the duration of the thermal runaway process under adiabatic conditions., I would like to acknowledge the Universitat Politècnica de València for supporting this doctoral thesis through the predoctoral contract UPV SUBP1 (PAID-01-22)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modeling and Evaluation of Oxy-Combustion and In Situ Oxygen Production in a Two-Stroke Marine Engine

  • Serrano, J.R.|||0000-0003-0692-3917
  • Arnau Martínez, Francisco José|||0000-0003-2902-0630
  • Calvo, Alejandro
  • Burgos, Rossana
[EN] Considering the concerns for emissions reduction in the maritime sector, the present paper evaluates, through modeling and simulation, oxy-fuel combustion in a two-stroke ship engine (2SE) and the best production system configuration to obtain the required oxygen (O2). An initial model of a ship engine is calibrated with the engine manufacturer's data and then adapted to work with O2 as the oxidant to eliminate nitrogen oxide (NOx) emissions and with exhaust gas recirculation (EGR) to control the in-cylinder combustion temperature. Mixed Ionic-Electronic Conducting (MIEC) membranes produce the necessary O2 from the ambient air, which is heated up and pressurized by a heat exchanger and turbocharging coupled system to provide the air conditions required for the proper operation of the MIEC. Several layouts of this system are evaluated for the full load engine operating point to find the optimum O2 production system configuration. Results reveal that the engine operating under oxy-fuel combustion conditions avoids NOx emissions at the expense of higher brake-specific fuel consumption (BSFC) to obtain the original brake torque, and also expels a stream composed exclusively of CO2 and H2O, which facilitates the separation of CO2 from exhaust gases., This research has been partially supported by Grant CIPROM/2021/061 funded by Generalitat Valenciana. Also partially supported by Grant PID2021-123351OB-I00 funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by ERDF A way of making Europe . And also partially funded by Programa de Ayudas de Investigación y Desarrollo PAID-01-22, from Universitat Politècnica de València (UPV) which granted the Rossana s pre-doctoral contract.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Urban Historiography and Graphic Reconstruction of a Historic Area in Valencia, Spain

  • López González, María Concepción|||0000-0001-7542-3559
  • Orozco-Carpio, Patricio Rodrigo|||0009-0007-3437-7390
  • Romaní López, Conxeta
[EN] The conservation of cultural heritage is a well-established fact recognized by public administrations, the scientific community, and society at large. Understanding this heritage strengthens the historical memory of communities. However, there is a type of heritage that, as it disappears or evolves over time, cannot be physically recovered: the urban fabric of historic cores. This article aims to implement a system for integrating historical urban data into a Geographic Information System (GIS) to enable the graphic recovery of urban evolution within a territory. This system facilitates the storage of alphanumeric and graphic data in a centralized database, providing a holistic view of the transformation process of a historic center¿s landscape. This case study focuses on an area in the historic center of Valencia, a territory influenced by multiple cultures since the city was founded by the Romans. Each culture has altered the spatial structures within the area. Georeferenced documents from historical archives, historical cartography, and the scientific literature were utilized for this study. The results have been integrated into the current cartography of Valencia in the GIS, producing plans of successive urban stages through the overlay of historical maps and current cartography., This research was funded by the project Analysis and Development of HBIM Integration into GIS for Creating a Cultural Heritage Tourism Planning Protocol (ref. PID2020-119088RB-I00), funded by the Ministry of Science and Innovation, Government of Spain, and the Programa de Ayudas de Investigación y Desarrollo (PAID-01-22) by the Universitat Politècnica de València
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental assessment of a heavy-duty fuel cell system in relevant operating conditions

  • Desantes J.M.|||0000-0002-4124-9393
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • López-Juárez, Marcos|||0000-0001-9886-4728
  • I. Nidaguila
[EN] During the past few years, the research interest in fuel cell systems (FCS) has increased significantly. Thus, this kind of powertrain is now at high Technology Readiness Levels (TRLs) and even starting to be commercialized. However, the currently available technology still has room for optimization. The existing bibliography shows studies mainly related to stack-level characterization or FCS studies with a poor level of detail. The present paper focuses on producing a detailed database about the performance of a specific FCS designed for heavyduty vehicle (HDV) applications. The obtained dataset provides information about the influence of ambient conditions on the performance of the system, plus information about the anode and cathode circuits. These factors represent an important novelty with respect to other pieces of literature present in the actual research framework. Additionally, the obtained data regarding the performance of an FCS is highly significant for HDV manufacturers in the transportation sector and eases the pathway to the optimization of these technologies. The written piece of research proves the importance of studying the ambient conditions. The experimental campaign has shown that increasing relative humidity can improve the performance of the membrane up to a 2% for a 25% change in the humidity level. Additionally, the study shows the importance of implementing an appropriate supply gas strategy, both for anode and cathode, and designing the right purging mechanisms for H2 2 at the anode inlet. The obtained results show how there exist a relation between the optimal efficiency operating point and a H2 2 excess from the supply strategy., This research has been partially funded by Universitat Politecnica de Valencia through the support program for research and development (PAID-01-22) and was performed in the frame of the ALL-IN Zero project, which is funded by the European Union's Horizon Europe research and innovation program under grant agreement No 101069888. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessment of the Isolated and Combined Impact of beta-Glucan and Lacticaseibacillus rhamnosus on Cystic Fibrosis Gut Microbiota Using a SHIME® System

  • Viteri-Echeverría, Jazmín Dayumara|||0000-0002-7692-9161
  • García Hernández, Jorge|||0000-0003-1258-6128
  • Heredia Gutiérrez, Ana Belén|||0000-0001-6629-9779
  • Andrés Grau, Ana María|||0000-0002-6132-3167
  • Calvo-Lerma, Joaquim
  • Asensio-Grau, Andrea
[EN] Background: Cystic fibrosis (CF) is a genetic disorder that disrupts gut microbiota com position, promoting dysbiosis associated with chronic inflammation, impaired nutrient absorption, and poor clinical outcomes. While modulation of the intestinal microbiota through prebiotics, probiotics, and synbiotics has been proposed as a therapeutic strategy, clinical evidence remains limited, especially in children. Objective: This study aimed to evaluate the impact of three supplementation strategies (a prebiotic (ß-glucan), a probiotic (Lacticaseibacillus rhamnosus GG), and their synbiotic combination) on the gut microbiota and metabolic activity of a CF child faecal donor using a dynamic in vitro colonic fermenta tion model (SHIME®). Methods: Microbial composition (16S rRNA gene sequencing), and metabolic activity (quantification of short-chain fatty acids (SCFAs), ammonia, and lactate) were analysed. Results: Results showed that the prebiotic increased alpha diversity; while both the prebiotic and probiotic treatments significantly reduced Bacillota and increased Bacteroidota, modulating the Bacillota/Bacteroidota ratio. The synbiotic treatment showed the most beneficial overall profile, including enhanced production of SCFAs, particularly butyrate and propionate, and increased abundance of Faecalibacterium and Agathobacter, which are two bacterial genera generally associated with gut health. Notably, the synbiotic also reduced the relative abundance of potentially pathogenic genera such as Veillonella, Megasphaera, and Stenotrophomonas, but paralleled with an increase in Clostridium ss 1. Although the probiotic alone showed some positive effects, it was less effective overall compared to the prebiotic and synbiotic approaches. Conclusions: These findings support the potential of synbiotic supplementation as a promising strategy to modulate gut dys biosis in CF, though in vivo studies are needed to confirm the translational relevance of these results., This work was funded by the Universitat Politècnica de València within the framework of the grant awarded to Andrea Asensio-Grau (Grants for First Research Projects 2022, ref. PAID-06-22). The authors also thank the Universitat Politècnica de València for the support granted to Jazmín Viteri-Echeverría [Predoctoral Contract Grants-SUBPR 1, ref. PAID-01-22]. Andrea Asensio-Grau acknowledges the Juan de la Cierva postdoctoral research grant awarded by the Spanish Ministry of Science and Innovation (JDC2022-048768-I).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Association between Dietary Intake and Faecal Microbiota in Children with Cystic Fibrosis

  • Viteri-Echeverría, Jazmín Dayumara|||0000-0002-7692-9161
  • Ferriz-Jordán, Miguel
  • García Hernández, Jorge|||0000-0003-1258-6128
  • Heredia Gutiérrez, Ana Belén|||0000-0001-6629-9779
  • Andrés Grau, Ana María|||0000-0002-6132-3167
  • Calvo-Lerma, Joaquim
  • Garriga, María
  • Ribes-Koninckx, Carmen
  • Asensio-Grau, Andrea
[EN] A "high-fat, high-energy diet" is commonly recommended for children with cystic fibrosis (CF), leading to negative consequences on dietary patterns that could contribute to altered colonic microbiota. The aim of this study was to assess dietary intake and to identify possible associations with the composition of faecal microbiota in a cohort of children with CF. A cross-sectional observational study was conducted, including a 3-day food record simultaneously with the collection of faecal samples. The results showed a high fat intake (43.9% of total energy intake) and a mean dietary fibre intake of 10.6 g/day. The faecal microbiota was characterised at the phylum level as 54.5% Firmicutes and revealed an altered proportion between Proteobacteria (32%) and Bacteroidota (2.2%). Significant associations were found, including a negative association between protein, meat, and fish intake and Bifidobacterium, a positive association between lipids and Escherichia/Shigella and Streptococcus, a negative association between carbohydrates and Veillonella and Klebsiella, and a positive association between total dietary fibre and Bacteroides and Roseburia. The results reveal that a "high-fat, high-energy" diet does not satisfy dietary fibre intake from healthy food sources in children with CF. Further interventional studies are encouraged to explore the potential of shifting to a high-fibre or standard healthy diet to improve colonic microbiota., The authors would like to thank the Universitat Politècnica de València for the pre-doctoral contract from Vicerrectorado de Investigación given to Jazmín Viteri Echeverría (PAID-01-22). This project was funded with the First Project Grant (PAID-06-22) and Postdoctoral Research Fostering Grant (PAIDPD-22) from Vicerrectorado de Investigación (Universitat Politècnica de València) awarded to Andrea Asensio-Grau.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A modeling study on the combustion characteristics of alcohol/diesel dual fuel counterflow flame

  • Rahnama, Pourya
  • Somers, Bart
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
[EN] This study combines a 0D Well Stirred Reactor (WSR), 1D counterflow flame, experimental data, and a 1D gas dynamic model to create an integrated modeling tool to study the dual fuel combustion behavior in engine-relevant conditions, fueled with E85 and diesel fuels. First, the performance of a reduced chemical kinetic mechanism is studied, and the most important reactions are identified. Subsequently, the validated mechanism is utilized to investigate ignition and flame propagation characteristics, and to analyze the combustion mode in different thermal and compositional stratification levels. The results reveal that under the studied operating conditions, auto-ignition of the background mixture was unlikely due to long ignition delay times compared to experimental combustion durations. Instead, the combustion mode is more of a partially premixed flame and diffusive combustion influenced by reactivity and thermal stratification. The effects of thermal stratification revealed that at higher temperatures of the background mixture, the location of the most reactive mixture fractions moves to the richer sides. Notably, low-temperature ignition behavior reflects the existence of cool flame chemistry near the stoichiometric zone, where intermediate species like formaldehyde form before full heat release occurs. When the oxidizer temperature increases further, a secondary, most reactive mixture fraction can be observed on the oxidizer (lean) side. Temperature and heat release rate profiles also revealed that at lower oxidizer temperatures, the heat release rate shows more traditional diffusive combustion behavior. However, at elevated temperatures, the secondary heat release rate, which corresponds to flame propagation, becomes more prominent. Increasing the ratio of E85 to diesel also influences the partially premixed flame propagation and its heat release. When the oxidizer temperature or E85 content is increased, the location of the secondary heat release moves further away to the oxidizer side, away from the stoichiometric region., The authors would like to thank the financial support received through contract UPV-Subprograma 2 (PAID-01-22) del Vicerrectorado de Investigacion and Nederlandse Organisatie voor Wetenschappelijk Onderzoek (NWO) project number HiEff, 10022252, which was incremental in the development of this thesis at the Technical University of Eindhoven (TU/e) and I.U.I. CMT-Clean Mobility & Thermofluids, Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Uncovering the mesoporous secrets of Ti/Al2O3 3-D gels: Fine-tuning morphology engineering for enhancing catalytic ozonation efficacy of environmental contaminants

  • Ostovar, Somayeh
  • Moussavi, Gholamreza
  • Mohammadi, Samira
  • Giannakis, Stefanos
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Bosca Mayans, Francisco
  • Diego-López, Ander|||0000-0001-5947-9579
[EN] Herein, we optimized the catalytic ozonation process (COP) by engineering the morphology of versatile mesoporous Ti-doped gamma Al2O3 materials. Ti/gamma Al2O3 catalysts were synthesized as xerogels, ambigels, and aerogels for pchlorobenzoic acid (pCBA) degradation by catalytic ozonation. The roles of Lewis acids and basic sites in Ti/ gamma Al2O3 were investigated along with the synthesis parameters affecting the morphology, structure, and surface acidity. The incorporation of Ti4+ increased the surface acidity, resulting in an effective COP. Full characterization confirmed the uniform Ti distribution and well-defined acidic properties. The sole ozonation process was insufficient, while 0.5 g/L catalyst addition rapidly degraded 50 mg/L pCBA (xerogel: 30 min, ambigel/aerogel: 60 min) while showing excellent reusability and robustness under ions' presence. EPR analysis suggested that pCBA removal occurs via bulk HO center dot and less by O3 and O2 center dot --mediated reactions, without 1O2 generation. Based on the above findings, we proposed an integrated pCBA degradation pathway, providing insights into enhancing the COP for organic pollutant degradation via novel, cheap, and sustainable mesoporous materials., The authors are grateful to the Ministry of Health and Medical Education, Iran, for providing financial support under the Elite Grant No. EG-402002. The authors also thank Tarbiat Modares University, Iran, for providing technical and financial support. The authors would also like to acknowledge the Spanish Ministry of Science, Innovation, and Universities (PID2019-110441RB-C33 financed by MCIN/AEI/10.13039/501100011033 and TED2021-131952B-I00 financed by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR). A. Diego-Lopez is indebted to the Universitat Politecnica de Valencia for the Predoctoral FPI fellowship (FPI-UPV/Subprograma 1).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Personal Data Flows and Privacy Policy Traceability in Third-party LLM Apps in the GPT Ecosystem

  • Carrillo-Moraga, Juan Carlos
  • Martin-Navarro, Jose Luis|||0000-0002-4503-4189
  • Such Aparicio, José Miguel|||0000-0002-6041-178X
  • Ma, Rongjun
[EN] The rapid growth of platforms for customizing Large Language Models (LLMs), such as OpenAI's GPTs, has raised new privacy and security concerns, particularly related to the exposure of user data via third-party API integrations in LLM apps. To assess privacy risks and data practices, we conducted a large-scale analysis of OpenAI¿s GPTs ecosystem. Through the analysis of 5,286 GPTs and the 44,102 parameters they use through API calls to external services, we systematically investigated the types of user data collected, as well as the completeness and discrepancies between actual data flows and GPTs' stated privacy policies. Our results highlight that approximately 35% of API parameters enable the sharing of sensitive or personally identifiable information, yet only 15% of corresponding privacy policies provide complete disclosure. By quantifying these discrepancies, our study exposes critical privacy risks and underscores the need for stronger oversight and support tools in LLM-based application development. Furthermore, we uncover widespread problematic practices among GPT creators, such as missing or inaccurate privacy policies and a misunderstanding of their privacy responsibilities. Building on these insights, we propose design recommendations that include actionable measurements to improve transparency and informed consent, enhance creator responsibility, and strengthen regulation., This research was partially funded by the INCIBE s strategic SPRINT (Seguridad y Privacidad en Sistemas con Inteligencia Artificial) C063/23 project with funds from the EU-NextGenerationEU through the Spanish government s Plan de Recuperación, Transformación y Resiliencia; by the Spanish Government via project PID2023- 151536OB-I0; and by the Generalitat Valenciana via project PROMETEO CIPROM/2023/23.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Light-Driven Antimicrobial Cotton Fabric: Multilayer Dye-Finishing Design and Hospital Environment Validation

  • Martínez-González, Inés|||0000-0002-7681-2879
  • Gisbert Paya, Jaime|||0000-0002-0950-8965
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Bonet-Aracil, Marilés|||0000-0002-8743-560X
  • Bosca Mayans, Francisco
  • Ayala Mingol, Ildefonso|||0000-0003-1132-9189
  • Moya Sanz, Mª Del Pilar|||0000-0001-9631-3084
  • Blázquez-Moraleja, Alberto|||0000-0003-1375-930X
  • Andreu, Inmaculada|||0000-0003-3409-9443
  • Delgado Villar, Sonia
  • García-Laínez, Guillermo
  • Mateos-Pujante, Alejandro
[EN] A sequential ionic multilayer finishing strategy enabled the stable co-immobilization of two photosensitizing dyes-cationic methylene blue (MB) and anionic Rose Bengal (RB)-onto cotton fabrics, overcoming cellulose-dye incompatibility through chitosan interlayers and cyanoguanidine fixation. The resulting multifunctional fabric (MF) preserved fiber integrity, while the dual-dye assembly broadened visible-light absorption and maintained the independent photosensitizing activity of each dye, enabling rapid and broadband antimicrobial action under white light. The material achieved complete inactivation of E. coli and E. faecalis within 60 and 20 min, respectively, ~6-log suppression of C. albicans after 3 h, and ~6-log inactivation of rAd5 within 60 min. Antimicrobial performance remained durable after repeated washing, consistently exceeding standard antimicrobial benchmarks. A pilot hospital validation further confirmed its translational potential, showing a 75% reduction in microbial load under ambient lighting, particularly against Gram-positive species (77.5%), and outperforming dark controls. Taken together, this architecture provides durable, resistance-free, self-disinfecting performance compatible with clinical workflows, offering a promising strategy to reduce microbial persistence in healthcare environments., The authors acknowledge the Universitat Politecnica de Valencia for financial support through the Research and Development Grants Programme (PAID-01-22), which funded the predoctoral contract of I.M.G. The authors are also grateful to the Agencia Valenciana de la Innovacion (AVI) for funding the strategic cooperative projects INNEST/2021/75 and INNEST/2021/28 and to the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital for CIAPOT/2021/33, which supported the contract of P. Norina. Additional financial support from the Spanish Ministry of Science and Innovation under grant CEX2021-001230-S (MCIN/AEI/10.13039/501100011033) is also gratefully acknowledged. A.B.M. acknowledges financial support through the postdoctoral contract CIAPOS/2023/201, co-funded by the Generalitat Valenciana and the European Union. Additional support was provided by the Universitat Politecnica de Valencia through the "Ayuda a Primeros Proyectos de Investigacion" programme (PAID-06-24). The authors acknowledge Pascual y Bernabeu S.A. and AITEX for their support in the pre-industrial development and scale-up of the textile substrates.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Highly effective CNT-based magnetic pn-junction nanocomposite photocatalyst/solar-energy material for hazmat conversion to hydrogen fuel

  • Ghanimati, Majid
  • Lashgari, Mohsen
  • Diego-López, Ander|||0000-0001-5947-9579
  • Bosca Mayans, Francisco
  • Marín García, Mª Luisa|||0000-0002-9789-8894
[EN] Hazmat conversion to hydrogen using low-cost effective eco-friendly solar energy active materials is a sustainable strategy for environmental remediation and provision of future green fuel. In this paper, a novel magnetic pn-junction nanocomposite was rationally designed and synthesized through a facile hydrothermal route using affordable chemicals in the absence and presence of CNT (carbon nanotube). The easy recyclable/re-collectable CNT-based magnetic materials with the scaling up capability synthesized here were applied as effective nanoenergy materials for photocatalytic conversion of H2S feed to hydrogen fuel. The maximum hydrogen production was attained for the pn-junction nanocomposite photocatalyst at the molar ratio 1:2 of p to n (rate: 5652 umolH2/g/h) and boosted 60% by adding CNT. Transient photocurrent, impedance, fluorescence and electron paramagnetic resonance (EPR) investigations revealed that the charge recombination is reduced in the presence of CNT and hence the photogenerated pairs can more effectively be utilized in the hazmat-to-fuel conversion process. The junction formation was approved at an atomistic scale through HRTEM observation. Furthermore, the magnetic property of the synthesized nanocomposite photocatalyst was improved in the presence of CNT and discussed in detail from physicochemical standpoint using VSM (vibrating sample magnetometric) and XPS (X-ray photoelectron spectroscopic) evidence., The authors wish to express their gratitude to the editor and reviewers of the manuscript, and to the Research council of IASBS for the financial support of this project. F. Bosca and M. Luisa Marin would like to acknowledge the Spanish Ministry of Science, Innovation, and Universities (PID2019-110441RB-C33 financed by MCIN/AEI/10.13039/501100011033 and TED2021-131952B-I00 financed by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR) . A. Diego -Lopez is grateful to the Universitat Politecnica de Valencia for the Predoctoral FPI fellowship (FPI-UPV/Subprograma 1).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Monte Carlo study of neutron spectra unfolding for a proton beam using MLEM

  • Díaz-Comeche, A.
  • Oliver-Gil, Sandra|||0000-0001-8258-3972
  • Juste-Vidal, Belen-Jeanne|||0000-0003-1978-3765
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
  • Morató, S.
[EN] Secondary neutrons are generated during proton therapy treatments, being a source of stray dose to the patient and personnel. Since the dose deposited by neutrons is directly related to their energy, determining their energy spectrum is crucial for the correct assessment of neutron doses. The aim of this work is to use Monte Carlo (MC) simulations to reproduce the generation of secondary stray neutrons in a proton therapy accelerator head and deconvolute their fluence energy spectrum using a Maximum Likelihood Expectation Maximization (MLEM) algorithm. This unfolding code utilizes a detector response to deconvolute spectra. Therefore, the response of a newly designed Extended Bonner Sphere Spectrometer (EBSS) mesh model, capable of detecting high-energy neutrons, has been evaluated by means of MC simulations. To deconvolute the neutron fluence energy spectrum with MLEM, the EBSS has been placed at 30 and 115 cm distance from the accelerator head in the direction of the proton beamline, and the secondary neutron fluence has been calculated in the volume of the detector. These measures served to unfold the MC simulated neutron fluence spectrum with absence of treatment room elements, by using the self-developed MLEM algorithm. The results indicate that a MLEM algorithm and MC simulations can be used as tools to assess neutron spectra in radiation therapies using protons., This study was partially supported by IRAMED (CIPROM/2022/38) from "Conselleria d'Innovacio, Universitats, Ciencia i Societat Digital" funded by "Generalitat Valenciana", under the program PROMETEO 2023.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A numerical analysis of hydrotreated vegetable oil and dimethoxymethane (OME1) blends combustion and pollutant formation through the development of a reduced reaction mechanism

  • García-Oliver, José M|||0000-0002-2676-9681
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Micó, Carlos|||0000-0001-5787-6212
  • Khalid, Usama Bin
  • López-Pintor, Darío
[EN] The solution to the dilemma of carbon footprint of internal combustion engines and pollutant emissions is necessary for the survival of this technology. In this context, alternative fuels have shown great potential in terms of achieving cleaner combustion and compliance with ever increasing pollutant emissions regulations. This work is focused on the study of two promising alternative fuels as Hydrotreated vegetable oil (HVO), which is a biofuel and Dimethoxymethane also termed as OME1, which is an e-fuel. A comprehensive numerical approach has been followed to study these fuels. Primarily a compact reaction mechanism having 121 species and 678 reactions has been developed which can be utilized to perform 3D CFD simulations of blends of these fuels. Secondly, a detailed numerical investigation including combustion and emissions analysis has been carried out. Results show that the developed mechanism is able to offer predictions, which match the experimental behavior observed in various combustion parameters and thus can be utilized for compression ignition engine applications involving these promising fuels. In addition, the numerical analysis also highlights that a reduction of 50% and 37% in terms soot and NOx emissions respectively can be achieved by addition of 30% OME1 in the blend containing HVO, suggesting that these blends can be utilized in unmodified CI engines to break the soot-NOx tradeoff without significantly penalizing the energy loss., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This work has been partially funded by Universitat Politecnica de Valencia through grant agreement UPV-Sub programa 2 (PAID-01-22)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development and validation of a reduced-order control-oriented model for hydrogen proton-exchange membrane fuel cells

  • Piqueras, P.|||0000-0002-3767-0839
  • De La Morena, Joaquín|||0000-0003-0208-508X
  • Sanchis, Enrique José|||0000-0002-6856-8992
  • Lalangui-Gallegos, José Andrés
[EN] Hydrogen proton-exchange membrane fuel cells are one of the technologies that can contribute to achieve the decarbonization targets set in the transport sector. However, such systems suffer from long-term degradation when subjected to highly dynamic operation, especially if low oxygen concentration conditions are reached internally in the cathode stream. Model-based control strategies can help to detect in advance and prevent the appearance of local low oxygen concentration conditions, enlarging the fuel cell stack durability. The purpose of the current research is to develop and validate a reduced-order control-oriented model for proton exchange membrane fuel cells. The model is structured to provide detailed one-dimensional resolution in the axial direction of the advective flow (along the gas feeding channels), so that local composition and electrochemical performance can be evaluated. Instead, mean values are considered in the transversal direction for each characteristic layer of the membrane electrode assembly (bipolar plates, gas diffusion layers, catalyst layers and membrane) to reduce computational cost. Moreover, the main novelty from this model is the development of explicit solutions for mass and species conservation equations, enabling faster than real time computation that is required for model-based control purposes. Once defined, the model is calibrated and validated against a set of data extracted from the literature. The results show that the model reproduces the polarization curves at different working conditions, and also resolves the local inhomogeneities along the cell in active species concentration and electrochemical losses that appear under low cathode stoichiometry. As these local phenomena drive both degradation and efficiency, the physics-based, reduced-order formulation with explicit local-property solution proposed avoids the cause-conflation issues associated to 0D models commonly used in control platforms., This research has been partially funded by the Advanced Materials programme and was supported by the Spanish Ministry of Science and Innovation with funding from the European Union NextGenerationEU (PRTR-C17.11) and by the Generalitat Valenciana as project INNOMAT-H2 (MFA/2022/041) Additionally, the Ph.D. student Jose Andres Lalangui has also been funded by a grant from Universitat Politecnica de Valencia, Spain with reference FPI (PAID-01-22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cell-to-cell dispersion impact on zero-dimensional models for predicting thermal runaway parameters of NCA and NMC811

  • García Martínez, Antonio|||0000-0001-5783-4936
  • Pastor, José V.|||0000-0003-4113-4681
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Golke, Diego
[EN] The battery electric vehicle is the leading technology for reducing greenhouse gas emissions using clean and renewable energy. However, concerns due to battery thermal runaway are becoming more severe as the battery energy density increases. Fast-calculation models capable of predicting the heat released during the thermal runaway phenomenon can help to develop safety mechanisms according to the battery chemistry. The current study assesses the battery thermal runaway variability for two different battery chemistries, nickel cobalt aluminium oxides and nickel manganese cobalt oxides, for 3 different states of charge (100%, 80% and 50%), two different battery sizes (18,650 and 21,700), and two different battery health (pristine and aged). The tests are performed in the accelerating rate calorimeter using the heat-wait-seek protocol and repeated 5 times (each battery condition) for statistical analysis of the main thermal runaway parameters. A model using the Arrhenius equation was developed, calibrated, and validated. The model was developed considering 5 steps during temperature evolution to the reliable prediction of thermal runaway characteristics, considering inputs as states of charge, capacity fade (solid electrolyte interface growth), energy density, battery end mass and initial voltage. The experimental tests show that temperature rise rate, when the exothermic is detected, and battery end mass play an important role in the self-heating duration and maximum temperature, respectively, which are key parameters to understanding scattering behaviour. Considering these effects during modelling, the model can forecast the primary features of a thermal runaway, including maximum temperature, onset temperature, and duration of the whole battery thermal runaway process, all within the average difference of no more than 3%. For this reason, the model proposed seems to be a suitable tool for battery safety mechanism design as it considers the state of charge, energy density and ageing effects., The authors acknowledge the Vicerrectorado de investigacion de la Universitat Politecnica de Valencia for supporting this research through Programa de Ayudas de Investigacion y desarrollo (PAID-01-22). This research is part of the projects TED2021-132220B-C21 and TED2021-130488 A-I00, funded by the MCIN/AEI/10.13039/501100011033 and the European Union "NextGenerationEU"/PRTR. This research is part of the project PID2021-124696OB-C21, funded by Ministerio de Ciencia e Innovacion, Agencia Estatal de Investigacion and FEDER (MCIN/AEI/1 0.13039/501100011033/FEDER, UE).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mechanistic insights into E. coli inactivation by MnOx-anode electrochlorination: coupled Fenton-like, active-chlorine and 1O2-pathways

  • Espinosa-Barrera, Paula Andrea
  • Calvo-Arroyo, Sara
  • Martínez-Pachón, Diana
  • Moncayo-Lasso, Alejandro
  • Giannakis, Stefanos
  • Diego-López, Ander|||0000-0001-5947-9579
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Bosca Mayans, Francisco
[EN] Our study explored E. coli inactivation by electrochemical chlorination using MnOx anodes, and the results support a multi-oxidant mechanism involving active chlorine species (ACS), cathodically generated H2O2, downstream 1O2 formation, and Fenton-like oxidative stress. E. coli inactivation was elucidated using assays with scavengers (catalase, tBuOH, bicarbonate), kinetic isotope experiments, and gene knockout mutants (catalases, superoxide dismutases, Mn2+ transport, and DNA repair). The experiments were conducted at a current density of 11.67 mA/cm2 and an electrolyte concentration of 0.05 mol/L NaCl, measuring complete inactivation of 108 CFU/mL within 90 min using a MnO anode (MnOx-A). The delay period prior to cell death was consistent with the intracellular generation of HO¿ and Cl¿ through Fenton-like reactions with electrochemically produced HOCl/OCl¿ and H2O2, supporting 1O2 generation and O2¿¿ participation in the disinfection process. Subsequently, cell death was triggered by combined intra- and extracellular oxidation, comprising damage to the cell membrane, cytoplasmic components, and DNA. Interestingly, as validated by XPS, when preparing the MnO2 anode (MnOx-B), the inactivation time decreased to 20 min, attributed to the further 1.69-to-1.81-fold increase in ACS generation (Current efficiency = 21.4%). Discerning the differences between MnOx anodes impulses innovation in electrochemical disinfection technologies, creating opportunities for metal-oxide-facilitated bacterial control., Paula Andrea Espinosa-Barrera thanks the Asociación Universitaria Iberoamericana de Postgrado (AUIP) for the scholarship within the Programa de Becas de Movilidad Académica entre Instituciones Asociadas a la AUIP 2023 (Second Term). A. Diego-Lopez is indebted to the Universitat Politècnica de València for the corresponding Predoctoral FPI fellowship (FPI-UPV/Subprograma 1). ML Marin and F. Bosca acknowledge the Spanish Ministry of Science, Innovation, and Universities (TED2021-131952B-I00 financed by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033). The authors would like to acknowledge Servei de Microscopia Electrònica from the Universitat Politècnica de València (UPV) for their support in the material characterization and sample preparation. Stefanos Giannakis acknowledges the REDDIS project, Procesos reductivos como el Talón de Aquiles bacteriano en la desinfección de aguas residuales y en aguas naturales , which received funding from the Agencia Estatal de Investigación (Spain), Proyectos Consolidación Investigadora 2022 (CNS2022-135728).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparative analysis of powertrain architectures for fuel cell light commercial vehicles in terms of performance and durability

  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • López-Juárez, Marcos|||0000-0001-9886-4728
  • González-Domínguez, David
  • I. Nidaguila
[EN] At the present time, the critical climate situation has raised awareness about the importance of developing carbon-free technologies. In this context, fuel cell systems (FCS) have become one of the key technologies in the pathway to decarbonization. Given that road transport is a major contributor to greenhouse gas (GHG) emissions, this paper focuses on a specific segment of this sector: light commercial vehicles (LCVs). The current market situation shows that LCV manufacturers have not yet decided what is the appropriate powertrain architecture for this kind of vehicle. Thus, the current paper studies a wide range of possible FCS-based propulsive system designs, changing the size of the FCS, electric battery and H2 tank. These propulsive system architectures are analyzed concerning the performance of the vehicle, in terms of consumption and range, and the durability of its FCS. The evaluation of these different designs will be highly valuable for the LCV industry and manufacturers, as it allows to understand the optimal powertrain solution. The study demonstrates that a significant increase in range can be achieved with only a minor penalty in hydrogen consumption. Additionally, the research indicates that it is feasible to employ one of the most durable FCS designs while meeting LCV mission requirements with minimal consumption penalty. In conclusion, this paper provides valuable data to the ongoing research in this field, offering a detailed analysis of the impact of H2 consumption, autonomy, and durability of the FCS across various vehicle architectures under typical LCV driving conditions., This research has been partially funded by Universitat Politecnica de Valencia through the support program for research and de-velopment (PAID-01-22) and by the Generalitat Valenciana (Conselleria d'Innovacio, Universitats, Ciencia i Societat Digital) as a part of the DEFIANCE research project (CIPROM/2021/039) through the PROMETEO funding program. The activities of this work are also part of TED2021-131463B-I00 (DIVERGENT) funded by MCIN/AEI/10.13039/501100011033 and the European Union "NextGenerationEU"/PRTR .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Real-Time Monitoring of Visitor Carrying Capacity in Crowded Historic Streets Through Digital Technologies

  • Viñals, Mª José|||0000-0002-7589-7815
  • Orozco-Carpio, Patricio Rodrigo|||0009-0007-3437-7390
  • Gandía-Romero, Jose M.|||0000-0003-0257-3286
  • Teruel, Penelope
[EN] This paper addresses methodological issues related to the identification and monitoring of visitor overcrowding and congestion situations in historic centres. Once the visitor carrying capacity was estimated for public spaces, taking into consideration the standards of quality and comfort for visitor experience and those related to the desired conditions for heritage assets¿ conservation, digital real-time monitoring tools were implemented in an experimental urban area in Valencia, Spain, in order to know, through the establishment of proxemic triggers, when the standards were violated (or may soon be violated); then, the carrying capacity was exceeded, and management actions may be required. The results show that these digital monitoring tools are very efficient and accurate in micro-scale public spaces, user-friendly and affordably priced., This research was funded by the project Analysis and Development of HBIM Integration into GIS for Creating a Cultural Heritage Tourism Planning Protocol (ref. PID2020-119088RB-I00), funded by the Ministry of Science and Innovation, Government of Spain, and the Programa de Ayudas de Investigación y Desarrollo (PAID-01-22) by the Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mineralization of pollutants in water at neutral pH through a heterogeneous photo-Fenton-like process generated by SiO2@TiO2@Fe3O4 in the presence of PMS

  • Cabezuelo-Gandia, Oscar
  • Diego-López, Ander|||0000-0001-5947-9579
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Bosca Mayans, Francisco
[EN] The photo-Fenton process has been proposed as a suitable strategy for efficiently oxidizing organic contaminants in water. However, its applicability is limited by pH and homogeneous medium requirements. In this sense, the present study aimed to surpass those limitations through a novel heterogenous SiO2@TiO2@Fe3O4 photocatalyst, which combines a core-support of SiO2 with an internal semiconductor shell of TiO2 and an external shell of magnetic Fe3O4 nanocrystals. Photocatalytic ortho-phenylphenol (OPP) degradation using this photocatalyst in the presence of H2O2 or PMS at a neutral pH showed a much faster OPP mineralization in the presence of PMS than when H2O2 was used as the oxidant. To understand this finding, EPR assays were performed, and their results revealed that a photo-Fenton-like oxidation process occurs when SiO2@TiO2@Fe3O4 photocatalyst is irradiated in the presence of PMS at neutral pH aqueous media. Thus ·OH and SO4·- radicals are generated during this process. However, the main reactive intermediate detected changing PMS by H2O2 was ·OOH radical. Hence, the high oxidation capability of ·OH and SO4·- radicals justify the fast OPP mineralization observed in the presence of PMS. Furthermore, an extensive evaluation of the new magnetic photocatalyst confirmed its robustness, showing consistent performance over multiple cycles without detecting significant iron leaching. Lastly, it is worth highlighting that the magnetic properties of Fe3O4 of this new photocatalyst, coupled with the core@shell technology, offer a technical improvement in efficiently separating inorganic photocatalysts from the reaction medium by applying an appropriate magnetic field., Predoctoral FPI fellowships (FPI-UPV/Subprograma 1) for O.C. and A.D., the Spanish Ministry of Science and Innovation (PDC2022 133426-I00 and TED2021 131952B-I00 financed by MCIN/AEI/10.13039/501100011033 and European Union Next Generation/PRTR), and CRUE-Universitat Politecnica de Valencia (open access charge) are gratefully acknowledged. Financial support by the Spanish Ministry of Science and Innovation (CEX2021 001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of pristine and aged NMC lithium-ion battery thermal runaway using ARC experiments coupled with optical techniques

  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Golke, Diego
  • De Vargas Lewiski, Felipe
[EN] Battery thermal runaway (TR) challenges battery applications due to safety considerations, potentially endangering consumers. Understanding the process is crucial to defining first alarm strategies that indicate the risk of TR and designing systems to mitigate this problem. For this reason, the present paper aims to characterise key variables of the venting and thermal runaway processes. Experimental tests were conducted in an accelerating rate calorimeter (ARC) using the heat wait seek (HWS) protocol, which tracks the battery temperature after detecting an exothermic reaction during the seek period. The maximum temperature rise rate and peak temperature that the calorimeter can achieve are 15 °C/min and 300 °C. Two optical accesses in the ARC were modified to use optical techniques such as Schlieren double pass and infrared. The results cover 3 different cell conditions: Pristine cells at state of charge (SOC) 100 %, pristine cells at SOC 50 %, and aged cells at SOC 100 %. For statical purposes, each cell condition was repeated 5 times. The aged battery was cycled to boost solid electrolyte interface growth. The images obtained were post-processed, with a specific methodology for each optical technique, and according to the parameters intended to be obtained. The main result shows that for higher SOC, the exothermic reaction is detected earlier than for SOC 50 %, which was only detected in an advanced TR stage (higher temperature rise rate). Therefore, the battery system capability to detect plays a crucial role in safety. Safety actuation time is reduced by ~ 40 % for SOC 50 %. However, the energy to manage during this situation is lower (~42 %), depending on the mass inside the battery, revealing the importance of a good venting cap design. Infrared images have shown higher particle temperatures for higher SOC, about 150 °C higher than the SOC 50 %. The particle velocity, in this case, achieved 30 m/s., This research is part of the projects TED2021-132220B-C21 and TED2021-130488A-I00, funded by the MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU /PRTR, and PID2021-124696OB-C21, funded by Ministerio de Ciencia e Innovación, Spain, Agencia Estatal de Investigación, Spain, and FEDER (MCIN/AEI/10.13039/501100011033/FEDER,UE), European Union. The authors acknowledge the Vicerrectorado de investigación de la Universitat Politècnica de València, Spain, for supporting this research through Programa de Ayudas de Investigacion y desarrollo (PAID-01-22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modeling of a solution polymerization reactor operating in semi-batch mode for polymethyl methacrylate production

  • Sáez-Pardo, Fermín|||0009-0000-0759-6781
  • Giner-Sanz, Juan José|||0000-0003-0441-6102
  • García Gabaldón, Montserrat|||0000-0003-4254-6733
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
[EN] The severe consequences of thermal runaways, make process optimization of paramount importance for free radical polymerization reactors, in order to maximize in an integrated way their safety and productivity. Generally, this optimization is performed by simulation, for the sake of safety and cost. Today, the literature contains several models of free radical polymerization reactors in general; and methyl methacrylate (MMA) polymerization reactors, in particular. Although, MMA polymerization is commonly performed in semi-batch reactors at industrial level, most of the available models focus on batch reactors; while, the semi-batch reactor models are much scarcer. In this work, a model of a MMA solution polymerization batch reactor was modified in order to generalize it to semi-batch operation. The developed semi-batch model was used here for studying the effect of different operation conditions (feeding flow rate, initiator load, monomer initial load, and reactor temperature) on the quality characteristics of the produced polymer and on the safety and productivity of the polymerization reactor. The developed model can be used to optimize the operation conditions of a semibatch reactor so that the final product quality meets the application requirements, while maintaining the reactor within its safe-operation envelope, and maximizing its productivity., F.S.P. acknowledges the support of Universitat Politecnica de Valencia through a predoctoral fellowship (PAID-01-22) . J.J.G.S. is very grateful to the Ministerio de Ciencia e Innovacion, to the Next Generation EU, and to the Agencia Estatal de Investigacion, for their support by a Juan de la Cierva-Incorporacio n fellowship IJC2020-044087-I funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. Funding for open access was provided by CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparative life cycle assessment of oxy-fuel combustion utilization across various fuels in the maritime sector

  • Serrano, J.R.|||0000-0003-0692-3917
  • Piqueras, P.|||0000-0002-3767-0839
  • Sanchis, Enrique José|||0000-0002-6856-8992
  • Francisco Javier
[EN] This paper, aligned with the International Maritime Organization's 2050 decarbonization goals, examines the lifecycle assessment (LCA) of marine fuels - both conventional and alternative - used in oxy-fuel combustion (OFC) technology with onboard CO2 capture. It offers a novel analysis of OFC in the maritime sector, utilizing stored O2 for combustion to eliminate nitrogen oxides (NOx) and capture CO2. The study also explores producing e-fuels (e-diesel and e-methanol) from H2 and captured CO2 to establish a closed-loop carbon cycle. In addition to e-fuels, biodiesel is evaluated as an alternative fuel, with heavy fuel oil (HFO) and liquefied natural gas (LNG) serving as conventional benchmarks. Ammonia is assessed as a non-carbon-based fuel for comparison. Using GREET 2024 for LCA inventory, this research compares CO2 emissions from carbon-based fuels under both conventional combustion and OFC in current and 2050 scenarios. Results show that OFC reduces CO2 HFO emissions from 90,000 mg/MJ to 25,000 mg/MJ. Biodiesel with OFC and CO2 capture achieves net-negative emissions (-37,841 mg/MJ). Ammonia achieves emission reductions over conventional fuels if CO2 is captured in the Steam Methane Reforming (SMR) process. By 2050, with H2 produced through electrolysis, e-fuel emissions are expected to decrease by up to 6,042 mg/MJ, a decrease of 84% compared to traditional combustion. Combining biodiesel and e-fuels with OFC emerges as the optimal solution for achieving net-negative emissions and advancing maritime decarbonization by 2050., This research has been partially funded by MCIN/AEI/10.13039/5 01100011033 and the European Union "NextGenerationEU"/PRTR as part of the project DIGIAMMONIA TED2021-129379A-I00 and by Grant CIPROM/2021/061 funded by Generalitat Valenciana, Spain. Additionally, the Ph.D. student Francisco Javier Garcia has also been funded by a grant from Universitat Politecnica de Valencia, Spain with reference FPI (PAID-01-22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of the thermal runaway phenomenon of Nickel-Manganese-Cobalt cells induced by nail penetration through high-speed infrared imaging

  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Golke, Diego
  • De Vargas Lewiski, Felipe
[EN] Gradual replacement of fossil fuels by clean and renewable energies is crucial to minimize the greenhouse effect from the transport sector. The electric vehicle is intended to be the leading technology for this purpose, for which clean and renewable energy must be stored as chemical energy in the battery. From the safety point of view, the main issue of this technology is related to the risk of thermal runaway. Among other factors, a collision can be one of the causes of a battery electric vehicle explosion, as damage to the surface of the battery can generate a short circuit, resulting in a battery thermal runaway. To replicate this situation at a system level, the nail penetration test is reproduced in laboratories. In this work, the effect of the nail penetration position, battery state of charge (SOC) and initial ambient temperature on the thermal runaway behavior of a Nickel-Manganese-Cobalt 811 cell is investigated. Infrared images were used to evaluate the temperature distribution in the battery surface, revealing the root causes for the scattering observed in the surface temperature when measured through thermocouples. Furthermore, a methodology to correct the thermographic images is described, abording the main uncertainties related to the characteristics of the optical access. The results show that the battery state of charge has a strong effect on the heat release than nail position and initial ambient temperature, increasing in 20 % from SOC 50 % to SOC 100 %. Regarding the position, nail penetration tests at the top of the battery lead to lower temperatures when compared to the other positions, representing 10 % less heat release than middle and bottom nail position. Furthermore, the thermographic images showed a variability in the spatial distribution of temperature between the test cells of up to 40 degrees C, with case rupture being mainly responsible for the higher values., The authors acknowledge the Vicerrectorado de investigacion de la Universitat Politecnica de Valencia for supporting this research through Ayuda a primeros proyectos de investigacion (PAID -06-22) y Programa de Ayudas de Investigacion y desarrollo (PAID -01-22). This research is part of the projects TED2021-132220B-C21 and TED2021-130488A-I00, funded by the MCIN/AEI/10.13039/501100011033 and the European Union "NextGenerationEU"/PRTR. Operacion financiada por la Union Europea a traves del Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) de la Comunitat Valenciana 2014-2020 con el objetivo de promover el desarrollo tecnologico, la innovacion y una investigacion de calidad. Proyecto IDIFEDER/2021/053, Equi pamiento para el estudio del fenomeno de combustion no controlada en baterias de vehiculos electricos, entidad beneficiaria Universitat Poliecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Modeling of Advanced Combustion Concepts in Engines with FGM

  • Rahnama, Pourya
[ES] Los motores diésel alcanzan mayor eficiencia que los motores de encendido provocado debido a su alta relación de compresión y a la ausencia de pérdidas por estrangulamiento, pero presentan retos relacionados con las emisiones de NOx y hollín. Los conceptos de combustión a baja temperatura (LTC) buscan reducir estos contaminantes y las pérdidas de calor. Los nuevos conceptos de combustión (HCCI o LTC) son de gran interés, aunque su adopción comercial se ve limitada por las dificultades en el control de la combustión y de los gradientes de presión. El concepto de encendido por compresión controlado por reactividad (RCCI) ha surgido como una alternativa prometedora. Utiliza dos combustibles de distinta reactividad, uno de baja reactividad inyectado en el conducto de admisión y otro de alta reactividad inyectado directamente en el cilindro, permitiendo un control preciso de la tasa de liberación de calor, el centrado de la combustión y su duración. Los motores RCCI presentan menores emisiones de NOx y hollín, y mayor eficiencia en comparación con los motores diésel convencionales. No obstante, la simulación de la combustión RCCI es muy compleja debido al uso simultáneo de dos combustibles y la formación de numerosas especies intermedias. La simulación de la cinética detallada requiere resolver sistemas rígidos de ecuaciones diferenciales acoplados con ecuaciones de transporte, lo que demanda métodos de resolución avanzados y un gran coste computacional, por lo que resulta impracticable. Los enfoques basados en tabular la química, como FGM, ofrecen una alternativa práctica al representar llamas turbulentas como conjuntos de flamelets laminares unidimensionales, cuyas soluciones se proyectan en un espacio de baja dimensionalidad. Esta tesis estudia la aplicabilidad del FGM en simulaciones de motores RCCI, centrándose en dos desafíos principales. En primer lugar, la elección de una variable de progreso (PV) adecuada resulta crítica, ya que influye de forma decisiva en la precisión del modelo. Se propone un enfoque generalizado mediante Algoritmos Genéticos (GA) que define automáticamente la PV maximizando su monotonicidad a lo largo del dominio de fracción de mezcla. Este método elimina la selección manual, mejora el rendimiento frente a definiciones tradicionales y ha sido validado frente a cinética detallada y datos experimentales del ECN Spray A. Los resultados muestran una predicción más precisa del tiempo de retraso, la longitud de despegue de llama y la distribución de especies. En segundo lugar, FGM presenta limitaciones de elevado consumo de memoria/almacenamiento y errores de interpolación, especialmente cuando la dimensionalidad de la tabulación aumenta en aplicaciones RCCI. Para solventar esto, se integran técnicas de Aprendizaje Automático (ML), Redes Neuronales Artificiales (ANNs), Random Forests (RF) y Gradient Boosted Trees (GBT), con FGM. Estos modelos predicen directamente parámetros de combustión a partir de variables de control con un coste menor de memoria y tiempo de cálculo. Entre ellos, las ANNs poco profundas ofrecen mayor precisión, en particular para parámetros complejos como el término fuente de la PV. Aunque requieren mayor tiempo de entrenamiento, sus predicciones son robustas y precisas, garantizando la validez de la simulación de la combustión. La validación muestra que el modelo ML-FGM iguala la precisión obtenida con cinética detallada, siendo más eficiente. Además, los métodos de ML se generalizan con éxito para predecir propiedades de transporte como conductividad térmica, viscosidad y difusividad, aumentando la compacidad y robustez del FGM. Esta tesis demuestra que la definición de PV basada en GA y el enfoque ML-FGM mejoran la aplicabilidad del FGM en simulaciones de conceptos de combustión avanzados. Estas innovaciones permiten simulaciones precisas y eficientes de motores RCCI, contribuyendo al desarrollo de sistemas de combustión de próxima generación eficientes y de bajas emisiones., [CA] Els motors dièsel aconseguixen major eficiència que els motors d'encesa provocada a causa de la seua alta relació de compressió i a l'absència de pèrdues per estrangulament, però presenten reptes relacionats amb les emissions de NOx i sutge. Els conceptes de combustió a baixa temperatura (LTC) busquen reduir estos contaminants i les pèrdues de calor. Els nous conceptes de combustió (HCCI o LTC) són de gran interés, encara que la seua adopció comercial es veu limitada per les dificultats en el control de la combustió i dels gradients de pressió. El concepte d'encesa per compressió controlat per reactivitat (RCCI) ha sorgit com una alternativa prometedora. Utilitza dos combustibles de distinta reactivitat, un de baixa reactivitat injectat en el conducte d'admissió i un altre d'alta reactivitat injectat directament en el cilindre, permetent un control precís de la taxa d'alliberament de calor, el centrat de la combustió i la seua duració. Els motors RCCI presenten menors emissions de NOx i sutge, i major eficiència en comparació amb els motors dièsel convencionals. No obstant això, la simulació de la combustió RCCI és molt complexa a causa de l'ús simultani de dos combustibles i la formació de nombroses espècies intermèdies. La simulació de la cinètica detallada requerix resoldre sistemes rígids d'equacions diferencials acoblats amb equacions de transport, la qual cosa demanda mètodes de resolució avançats i un gran cost computacional, per la qual cosa resulta impracticable. Les aproximacions basades en tabular la química, com FGM, oferixen una alternativa pràctica en representar flames turbulentes com a conjunts de flames laminars unidimensionals, les solucions dels quals es projecten en un espai de baixa dimensionalitat. Esta tesi estudia l'aplicabilitat del FGM en simulacions de motors RCCI, centrant-se en dos desafiaments principals. En primer lloc, l'elecció d'una variable de progrés (PV) adequada resulta crítica, ja que influïx de manera decisiva en la precisió del model. Es proposa una aproximació generalitzada mitjançant Algorismes Genètics (GA) que definix automàticament la PV maximitzant la seua tasa de creixement al llarg del domini de fracció de mescla. Este mètode elimina la selecció manual, millora el rendiment enfront de definicions tradicionals i ha sigut validat enfront de la cinètica detallada i dades experimentals del ECN Spray A. Els resultats mostren una predicció més precisa del temps de retard, la longitud d'enlairament de flama i la distribució d'espècies. En segon lloc, FGM presenta limitacions d'elevat consum de memòria/emmagatzematge i errors d'interpolació, especialment quan la dimensionalitat de la tabulació augmenta en aplicacions RCCI. Per a solucionar això, s'integren tècniques d'Aprenentatge Automàtic (ML), Xarxes Neuronals Artificials (ANNs), Random Forests (RF) i Gradient Boosted Trees (GBT), amb FGM. Estos models prediuen directament paràmetres de combustió a partir de variables de control amb un cost menor de memòria i temps de càlcul. Entre ells, les ANNs poc profundes oferixen major precisió, en particular per a paràmetres complexos com el terme font de la PV. Encara que requerixen major temps d'entrenament, les seues prediccions són robustes i precises, garantint la validesa de la simulació de la combustió. La validació mostra que el model ML-FGM iguala la precisió obtinguda amb cinètica detallada, sent més eficient. A més, els mètodes de ML es generalitzen amb èxit per a predir propietats de transport com a conductivitat tèrmica, viscositat i difusivitat, augmentant la eficiència i robustesa del FGM. Esta tesi demostra que la definició de PV basada en GA i l'aproximació ML-FGM milloren l'aplicabilitat del FGM en simulacions de conceptes de combustió avançats. Estes innovacions permeten simulacions precises i eficients de motors RCCI, contribuint al desenvolupament de sistemes de combustió de pròxima generació eficients i de baixes emissions., [EN] Diesel engines achieve higher efficiency than spark ignition engines due to their high compression ratio and absence of throttling losses, but face challenges with NOx and soot emissions. Low-temperature combustion (LTC) concepts aim to reduce these pollutants and heat losses. Homogeneous Charge Compression Ignition (HCCI) is a notable LTC method, yet commercial adoption is hindered by difficulties in controlling combustion phasing and pressure rise rate. Reactivity Controlled Compression Ignition (RCCI) has emerged as a promising alternative. It uses two fuels of different reactivity, low-reactivity fuel injected in the intake port and high-reactivity fuel directly injected in-cylinder, allowing precise control of heat release rate, combustion phasing, and duration. RCCI engines show lower NOx and soot emissions and higher efficiency compared to conventional diesel engines. However, RCCI combustion modeling is highly complex due to the involvement of two fuels and numerous intermediate species. Detailed chemical kinetics simulations require solving stiff systems of differential equations coupled with transport equations, demanding advanced solvers and prohibitive computational cost. With mechanisms often exceeding a thousand species, direct simulations remain impractical. Tabulated chemistry approaches, such as the Flamelet-Generated Manifold (FGM), have long provided a practical alternative by representing turbulent flames as sets of 1D laminar flamelets, whose solutions are mapped into low-dimensional manifolds. This thesis investigates FGM applicability to RCCI simulations, focusing on two major challenges. First, the choice of a suitable progress variable (PV) is crucial, as it strongly influences model accuracy. A generalized approach is proposed using Genetic Algorithms (GA) to automatically define PV by maximizing monotonicity across the mixture fraction domain. This method removes manual selection, improves performance over traditional PV definitions, and has been validated against detailed kinetics and ECN Spray A experimental data. Results demonstrate improved prediction of ignition delay, flame lift-off length, and species distributions across operating conditions. Second, FGM faces limitations of high memory/storage demand and interpolation errors, especially when manifold dimensionality increases in RCCI applications. To address this, Machine Learning (ML) techniques, Artificial Neural Networks (ANNs), Random Forests (RF), and Gradient Boosted Trees (GBT), are integrated with FGM. These models directly predict combustion parameters from control variables with far lower memory and runtime costs. Among them, shallow ANNs achieve the best predictive accuracy, particularly for complex parameters such as the PV source term. While ANNs require longer training time, their predictions remain accurate and robust, ensuring credibility in combustion modeling. Benchmark studies show ML-FGM performs on par with detailed kinetics while being more computationally efficient. Furthermore, ML methods are successfully generalized to predict transport properties such as thermal conductivity, viscosity, and diffusivity, improving compactness and robustness of the FGM framework. Overall, this thesis demonstrates that GA-based PV definition and ML-FGM substantially enhance the applicability of FGM for advanced dual-fuel combustion simulations. These innovations enable computationally efficient and accurate modeling of RCCI engines, contributing to the development of next-generation high-efficiency, low-emission combustion systems., I would like to sincerely thank the financial support received through Nederlandse Organisatie voor Wetenschappelijk Onderzoek (NWO) and contract UPV - Subprograma 2 (PAID-01-22) del Vicerrectorado de Investigación, which was incremental in the development of this thesis at the Technical University of Eindhoven (TU/e) and I.U.I. CMT – Clean Mobility & Thermofluids, Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Rapid degradation of Omeprazole and highly effective inactivation of E. coli in the UVA-light photocatalytic process with Cu-doped in spinel-structured Al2O3 as a stable catalyst

  • Ostovar, Somayeh
  • Moussavi, Gholamreza
  • Mohammadi, Samira
  • Giannakis, Stefanos
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Bosca Mayans, Francisco
  • Diego-López, Ander|||0000-0001-5947-9579
[EN] Herein, a spinel alumina structure photocatalyst was prepared by a one-pot modified sol¿gel technique with rational design and unique electronic structure evolution by Cu doping in the ¿Al2O3 lattice. Based on the obtained results of a full material characterization (incl. NH3-TPD, 27Al solid-state NMR, XPS, HAADF-STEM), the Cu-¿Al2O3 xerogel nanomaterial displayed high dispersion of copper, significant quantities of high-density acid sites, an increase of the oxygen vacancies (OVs) on its surface, and high light absorption efficiency. This mesoporous Cu-¿Al2O xerogel displayed brilliant photocatalytic performance under UVA-LED, owing to its suitable band gap, degrading around 92 % of 20 mg/L Omeprazole (OMP) in 30 min (pH = 7, catalyst = 50 mg/L). The effect of operating parameters was investigated, such as pH, concentration of Cu-¿Al2O3/OMP, water matrix, and stability; the synthesized nanomaterial has shown outstanding stability and recyclability for four runs. The reaction mechanism was proposed using scavenging experiments, and EPR spectroscopy, Cu-doping-induced oxygen vacancies to promote charge separation and molecular oxygen activation, generating mainly ·OH. The OMP degradation pathway was proposed (LC-MS), while the produced Cu-¿Al2O3 nanomaterial effectively catalyzed the inactivation of >99.99 % E. coli., This work is based upon research funded by Iran National Science Foundation (INSF) under project No. 4024503. This work was technically and financially supported by the Tarbiat Modares University, Iran, under the Research Group grant No. IG-39801. The authors would also like to acknowledge the Spanish Ministry of Science, Innovation, and Universities (PID2019-110441RB-C33 financed by MCIN/AEI/10.13039/501100011033 and TED2021-131952B-I00 financed by MCIN/AEI/10.13039/501100011033 and by European Union Next-GenerationEU/PRTR). A. Diego-Lopez is indebted to the Universitat Politecnica de Valencia for the Predoctoral FPI fellowship (FPI-UPV/Subprograma 1).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Surface Relief Gratings of Slide-Ring Hydrogels for Label-Free Biosensing

  • Cubells-Gómez, Aitor|||0000-0001-6844-3439
  • Lucío, María Isabel|||0000-0001-7404-352X
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
This work was supported by project WEAROPSENS PID2022-140653OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by "ERDF/EU" and PROGRAMA PROMETEO 2024-CIPROM/2023/18 from Generalitat Valenciana. A. Cubells-Gomez acknowledges the FPI-UPV 2022 grant program (PAID-01-22) from Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Advanced hydrogel-based volume holographic gratings for label-free biosensing

  • Cubells-Gómez, Aitor|||0000-0001-6844-3439
  • Lucío, María Isabel|||0000-0001-7404-352X
  • Maquieira, Angel|||0000-0003-4641-4957
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Murray, Michael
  • Martin, Suzanne
  • Naydenova, Izabela
[EN] Hydrogels have been investigated as materials for the fabrication of label-free (LF) holographic sensors, given their ability to undergo structural changes upon interaction with specific analytes [1]. Hydrogel-based holographic biosensors are emerging as a new technology for the development of portable or wearable analytical devices of clinical interest, leveraging their biocompatibility and capacity to mimic biological environments. Despite their potential, their use is still in its infancy as the materials developed so far have some drawbacks, such as brittleness or mechanical instability. Slide-ring (SR) gels, developed by Ito [2] informed the development of the new biosensitive hydrogels with advanced properties presented here. This work focuses on the optimization of the recording process of volume holographic gratings (VHGs) in hydrogel films based on SR aimed at LF detection. Hydrogels containing phosphorylcholine and methylated polyrotaxanes were synthesized and characterized by scanning electron microscopy (SEM) and swelling kinetics studies. The bioavailability of hydrogels for the specific recognition of C-reactive protein (CRP) was verified by fluorescence detection. Then, the formation of VHGs in the films was achieved initially by holographic recording using two-beam interference at 532nm [3] and further optimized for high Diffraction Efficiency by contact copying a master grating [4]. Diffraction efficiency measurements were then used for the direct LF detection of CRP. This research paves the way for future applications of VHGs in clinical analysis and provides a basis for a forward-thinking approach to biomolecular detection., This work was supported by project WEAROPSENS PID2022-140653OB-I00 funded by MICIU/AEI/ 10.13039/501100011033 and by ERDF/EU and PROMETEO CIPROM/2023/18. A. Cubells-Gómez acknowledges the FPI-UPV 2022 grant program (PAID-01-22) and the Ayudas para movilidad de estudiantes de doctorado de la UPV 2023 Michael Murray is supported by Research Ireland Grant SFI 20/FFP-P/8851 (LIGHTSHAPE).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A random mathematical model to describe the antibiotic resistance depending on the antibiotic consumption: the Acinetobacter baumannii colistin-resistant case in Valencia, Spain

  • Aledo, Juan A.
  • Orengo, Juan C.
  • Andreu-Vilarroig, C.|||0000-0001-5083-4837
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
[EN] The increase in antibiotic resistance in recent years, mainly due to the non-rational use of antibiotics, is one of the most important global public health threats. In this paper, we propose a mathematical dynamic random model describing the antibiotic resistance evolution of a bacteria and where antibiotic consumption is included is the main driving force in the resistance increase. The random model is solved using the Random Variable Transformation technique and is applied to study the case of Acinetobacter baumannii bacterium resistant to the antibiotic colistin in Valencia, Spain. Using the Multi-Objective Particle Swarm Optimization algorithm, the model has been calibrated with the A. baumannii colistin-resistance and colistin consumption data series. With the optimal model, four possible 7-year future scenarios with different antibiotic consumption trends have been simulated. The model results show how reducing antibiotic consumption does not easily stop the increase in resistance., This work has been funded by the project SBPLY/21/180225/000062 funded by the Government of Castilla-La Mancha and ERDF A way of making Europe. It is also partially funded by MCIN/AEI/10.13039/501100011033 and "ESF Investing your future" through the projects PID2019-106758GB-C33 and PID2020-115270GB-I00. Additionally, it has been funded by the Universitat Politecnica de Valencia PAID-01-22 program under grant 20230185.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

In vitro screening of the impact of dietary prebiotic components, probiotic strains, and their symbiotic combinations on colonic microbiota in children with cystic fibrosis

  • Viteri-Echeverría, Jazmín Dayumara|||0000-0002-7692-9161
  • Andrés Grau, Ana María|||0000-0002-6132-3167
  • Heredia Gutiérrez, Ana Belén|||0000-0001-6629-9779
  • García Hernández, Jorge|||0000-0003-1258-6128
  • Calvo-Lerma, Joaquim
  • Asensio-Grau, Andrea
[EN] Children with Cystic Fibrosis (CF) are more likely to have intestinal dysbiosis due to recurrent antibiotic therapy and the conventional hypercaloric diet administered to them. This study aimed at evaluating the effect of isolated prebiotic components and probiotic strains, and their combinations as potential synbiotics, on the intestinal microbiota of CF children. A static in vitro colonic fermentation model was used by colonizing vials with faecal inoculum, a culture medium, and the substrates to be tested. Post treatment, aliquots were taken to determine ammonium, lactate, and short-chain fatty acids production and to profile the microbiota composition by 16s rRNA sequencing. At genus level, Escherichia-Shigella decreased (15.8%) with the treatment pectin + L. rhamnosus, followed by the beta-glucan + L. salivarius (15.5%). Inversely, the most increase in Bacteroides (44%) was obtained by the treatment with Pectin + L. reuteri. Lactate and acetic acid production was significantly increased with prebiotics and their combinations with L. rhamnosus and L. salivarius. In conclusion, the use of beta-glucan and pectin in combination with probiotic strains from the Lactobacillaceae family suggest potential to modulate dysbiosis and metabolic activity on CF colonic microbiota, encouraging further studies in animal studies or clinical settings to confirm the findings in vivo., This work was supported by Universitat Politecnica de Valencia, (First Project Grant, ref. PAID-06-22). The authors also acknowledge Universitat Politecnica de Valencia for the pre-doctoral contract given to Jazmin Viteri-Echeverria, ref. PAID-01-22, and for the post-doctoral research fostering grant awarded to Andrea Asensio-Grau, ref. PAIDPD-22. The authors also thank the families of the children with CF for their participation in the study.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influencia de la combinación de pH y temperatura en el color del Azul de Metileno

  • Martínez-González, Inés|||0000-0002-7681-2879
  • Bou-Belda, Eva|||0000-0003-1461-9296
  • Díaz-García, Pablo|||0000-0002-7093-6061
  • Montava-Seguí, Ignacio|||0000-0001-6564-813X
  • Bonet-Aracil, Marilés|||0000-0002-8743-560X
[EN] In exhaustion dyeing processes, optimising parameters such as temperature and pH is essential. The dye Basic Blue 9 or Methylene Blue has widely described antimicrobial properties that generate significant interest in its use for textile dyeing. However, the optimum conditions for its application have not yet been defined. This study will analyse how temperature and pH parameters affect the colour of methylene blue individually and in combination. From the results obtained so far, it has been observed that a shift of the maximum wavelength from blue to purple occurs in very alkaline media with high temperatures. The importance of this preliminary analysis is emphasised since it is necessary to determine the concentrations of the waters by absorbance correctly., [ES] En procesos de tintura por agotamiento es imprescindible la optimización de los parámetros como pueden ser la temperatura y el pH. El colorante Basic Blue 9 o Azul de Metileno posee propiedades antimicrobianas ampliamente descritas que genera un gran interés en su utilización para coloración de textiles, no obstante, no se ha definido todavía cuáles son las condiciones óptimas para su aplicación. En este estudio se analizará cómo afectan los parámetros de temperatura y pH al color del azul de metileno tanto individualmente como en combinación. Con los resultados obtenidos hasta el momento se ha observado que en medios muy alcalinos a los que se les aplica altas temperaturas se produce un desplazamiento de la longitud de onda máxima de un tono azul a otro morado. Se destaca la importancia de este análisis previo, puesto que es necesario para poder determinar correctamente las concentraciones de las aguas mediante absorbancia., La autora quiere expresar su agradecimiento al Programa de Ayudas de Investigación y Desarrollo (PAID01-22) de la Universitat Politècnica de València por su contrato como investigadora predoctoral en formación.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Equivalent Electrical Circuit recommendation for Electrochemical Impedance Spectroscopy: A benchmark of different Machine Learning algorithms

  • Sáez-Pardo, Fermín|||0009-0000-0759-6781
  • Giner-Sanz, Juan José|||0000-0003-0441-6102
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
[EN] Electrochemical Impedance Spectroscopy (EIS) is a technique widely used in the electrochemistry field that allows assessing the kinetic parameters of electrochemical systems. In general, EIS spectra are analyzed using 2 methodologies: the physical¿mathematical methodology and the Equivalent Electrical Circuit (EEC) methodology. The physical¿mathematical methodology consists in developing and solving the set of differential equations that govern the system. In contrast, the EEC methodology describes EIS data in terms of EEC models, decreasing the math complexity and democratizing the use of the EIS technique. In the EEC methodology, the most critical task is selecting a physically sound EEC model. To help with the EEC model selection, Prof. Digby D. Macdonald proposed creating the Electrochemistry¿s Genome Project, which would consist of a large database and an Artificial Intelligence (AI) able to suggest plausible EEC models given an EIS spectrum. Until now, several works have explored the idea of using Machine Learning (ML) for recommending an EEC for a given EIS spectrum. Indeed, several authors have benchmarked different ML algorithms for this task. However, these benchmarks generally report point estimates of the accuracy achieved by each algorithm, but do not assess its uncertainty. In this work, we benchmarked different ML EEC recommendation algorithms. To achieve this, we refined a preexistent database, obtaining a new database. Then, the new database was used to train different ML algorithms, optimize their hyperparameters, and assess their accuracy. Finally, the performance of the different optimized algorithms were compared. Whereas most of the other benchmarks available in literature work with point estimates of the accuracies, in this work, the accuracy distributions have been estimated. This methodology allows to compare the performance of the different algorithms in a much more reliable and robust way., F.S.P. acknowledges the support of Universitat Politecnica de Valencia through a predoctoral fellowship (PAID-01-22). J.J.G.S. is very grateful to the Ministerio de Ciencia e Innovacion, to the Next Generation EU, and to the Agencia Estatal de Investigacion, for their support by a Juan de la Cierva-Incorporacion fellowship IJC2020-044087-I funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Image database for the scientific paper: Deep Learning Algorithm, Based on Convolutional Neural Networks, for Equivalent Electrical Circuit Recommendation for Electrochemical Impedance Spectroscopy

  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • Giner-Sanz, Juan José|||0000-0003-0441-6102
  • Sáez-Pardo, Fermín|||0009-0000-0759-6781
[EN] The present dataset is the database and image database used to train and test the Convolutional Neural Network models of the scientific paper: Deep Learning algorithm, based on convolutional neural networks, for electrical equivalent electrical circuit recommendation for Electrochemical Impedance Spectroscopy
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Momentum flux-based model to estimate injection rate of an ammonia injector

  • Bracho Leon, Gabriela|||0000-0002-9198-7044
  • De La Morena, Joaquín|||0000-0003-0208-508X
  • Daniel
  • Martino, Manuel
  • Postrioti, Lucio
[EN] Ammonia emerges as a feasible candidate to replace fossil fuels to avoid in-field CO2 emissions while operating low-speed internal combustion engines. An in-depth analysis of the injection process is necessary to enable the use of this fuel. The injection rate is a fundamental characteristic of the injection process, which describes the timing and instantaneous quantity of fuel mass introduced into the combustion chamber. However, the direct experimental evaluation of the injection rate is generally not possible due to the incompatibility of ammonia with existing measurement hardware. This study proposes a methodology to estimate the ammonia injection rate curve of high-pressure injectors for compression ignition engines based on momentum flux data, obtained using equipment suitable for ammonia properties. In this regard, two single-hole injectors were investigated using ammonia and, as a reference fuel, diesel. A comparison between the injection rate and momentum flux operating on diesel allows the derivation of a transfer function for extrapolating the injection rate curve from the momentum flux signal. After validating the model, it was applied to the case of ammonia injections for which only momentum flux data were available. The proposed methodology offers a viable alternative to obtain the injection rate measurement, particularly in challenging scenarios where only momentum flux data is available and direct measurement of the injection rate is not feasible., This research has been partially funded by MCIN/AEI/10.13039/501100011033 and the European Union "NextGenerationEU"/PRTR as part of the project DIGIAMMONIA TED2021-129379A-I00. The author D. Pinilla thanks the Universitat Politecnica de Valencia for his pre-doctoral contract (FPI-2022-S2-64225) , which is included within the framework of Programa de Apoyo para la Investigacion y Desarrollo (PAID-01-22) . Also, the authors would like to thank Jose Enrique del Rey and Omar Huerta for their valuable support during the experimental campaign.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis and mechanistic insights of SiO2@WO3@Fe3O4 as a Novel Supported Photocatalyst for Wastewater Remediation under Visible Light

  • Diego-López, Ander|||0000-0001-5947-9579
  • Vidal Moya, José Alejandro
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Bosca Mayans, Francisco
  • Cabezuelo, Oscar
[EN] A new optimized photocatalyst for wastewater remediation at neutral pH has been developed and fully characterized. The catalyst features microparticles of SiO2 as a supporting substrate and a uniform shell of WO3 nanoparticles externally decorated with Fe3O4 nanocrystals. The photocatalytic activity of SiO2@WO3@Fe3O4 was evaluated and compared to its SiO2@WO3 counterpart on the photodegradation of methylene blue (MB) under visible light, with and without H2O2. Best results were obtained for SiO2@WO3@Fe3O4 in the presence of H2O2, whose potential for wastewater remediation was further evaluated on the photodegradation and mineralization of a contaminant of emerging concern such as diclofenac (DCF). Furthermore, a photocatalytic mechanism was proposed based on the performed electron paramagnetic resonance (EPR) experiments, which provided evidence for the intermediates generated in all the involved photocatalytic processes. Hence it was proven that .OH is the species responsible for the photocatalyzed oxidation of MB and DCF. The generation of .OH is boosted by a synergistic effect between Fe3O4 and WO3 in the presence of light and H2O2., The authors would like to acknowledge the Spanish Ministry of Science, Innovation, and Universities (PID2019-110441RB-C33 financed by MCIN/AEI/10.13039/501100011033 and TED2021-131952B-I00 financed by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR) . A. Diego-Lopez and O. Cabezuelo are indebted to the Universitat Politecnica de Valencia for the Predoctoral FPI fellowship (FPI-UPV/Subprograma 1) . The authors would like to acknowledge the Servei de Microscopia Electronica from the Universitat Politecnica de Valencia (UPV) for the support on the composite characterization and sample preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Towards scalable broad-spectrum photodynamic antimicrobial textiles: synergistic effect of Rose Bengal and commercial cationic fixative on polyamide fabrics

  • Martínez-González, Inés|||0000-0002-7681-2879
  • Moya Sanz, Mª Del Pilar|||0000-0001-9631-3084
  • Andreu, Inmaculada|||0000-0003-3409-9443
  • Díaz-García, Pablo|||0000-0002-7093-6061
  • Blázquez-Moraleja, Alberto|||0000-0003-1375-930X
  • Ayala Mingol, Ildefonso|||0000-0003-1132-9189
  • Bonet-Aracil, Marilés|||0000-0002-8743-560X
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Bosca Mayans, Francisco
  • Delgado Villar, Sonia Guadalupe
  • Mateos-Pujante, Alejandro
[EN] The use of photoactive textiles to reduce infection transmission in healthcare facilities and hospitals is not on the market due to the lack of scalable and cost-effective processes to prepare these materials. To address this issue, a new photodynamic antimicrobial fabric of polyamide with Rose Bengal (RB) and a commercial cationic fixative (CF) was prepared with a simple and scalable procedure using a conventional and industrialized process for incorporating dyes into textiles. Both fabrics (with and without CF) produced more than 99% inactivation of Gram-positive and Gram-negative bacteria (Enterococcus faecalis and Escherichia coli, respectively), as well as viruses such as adenovirus rAd5. Nevertheless, it is worth highlighting that the RB fabric with CF achieved 99.9999% inactivation of E. coli and 99.9% inactivation of fungi such as Candida albicans. The study was performed upon typical indoor illumination with visible light (400¿700 nm, 11.3 ± 0.2 mW cm¿2) during periods covering between 30 and 120 min, according to the tested microorganism. Tests performed with textiles to evaluate the persistence of the RB color in them and their capability to photosensitize the inactivation of microorganisms revealed that the CF improves the robustness of the fabric. Furthermore, the photophysical and photodynamic properties of the fabrics were evaluated by direct and indirect methods. In this context, the formation of photoactivable complexes was observed through the association of RB with CF. Moreover, it was established that the remarkable photodynamic efficiency using the fabric with CF is produced through an electron transfer from microorganisms to an excited RB¿CF complex (Type I) and singlet oxygen generated from the triplet excited state of free RB (Type II)., The authors would like to express their gratitude to the Research and Development Grants Programme (PAID-01-22) of the Universitat Politecnica de Valencia for the contract as a pre-doctoral researcher in training (Ines Martinez-Gonzalez), and are also grateful to the Agencia Valenciana de Innovacion for the funding on the strategic projects in cooperation, reference INNEST/2021/75, INNEST/2021/28 and the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital for CIAPOT/2021/33 to contract P. Norina. We also extend our gratitude to the Generalitat Valenciana and the European Union for co-funding the A.B.M. postdoctoral contract (CIAPOS/2023/201) through the European Social Fund Plus Operational Program 2021-2027 (FSE +). We would also like to extend our thanks to the Spanish Ministry of Science, Innovation and Universities and the State Research Agency (TED2021-131952B-I00 funded by MCIN/AEI/10.13039/501100011033), European Union NextGenerationEU/PRTR. Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is also gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical Assessment of OME3 Combustion and Emission Reduction Under Oxy-Fuel Conditions in a CI Engine

  • Bruerre, Mathys
  • Bracho Leon, Gabriela|||0000-0002-9198-7044
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
  • Fernandes, Cássio S.
  • Lucchini, Tommaso
[EN] The use of renewable synthetic fuels is a suitable alternative for combustion-based systems. Their implementation can reduce pollutant emissions such as soot, CO and CO2, but NOx remains difficult to abate. The objective of this study is to evaluate the combination of Oxymethylene Ether-3 (OME3) with the oxy-fuel concept, hence operating without N2 and minimizing nitrogen oxides formation. For this purpose, advanced numerical simulations were used to investigate the effects of this strategy on combustion thermodynamics, efficiencies, and exhaust products. This model was adapted for the OME3 use, obtaining a reduction in soot production due to the fuel characteristics, but an increment of NOx emission. To overcome this issue, the oxy-fuel concept was implemented to remove N2 from the combustion process. The numerical analysis provides insights into combustion performance to enhance the comprehension of the factors responsible for emission reductions. Preliminary results have shown the feasibility to eliminate NOx while maintaining a near-zero soot production. Further evaluations pointed out a reduction of 90% and 30% of CO and HC, respectively, with a slight improvement (1%) of the combustion efficiency (98%) and Gross Indicated Efficiency (GIE) (36%). Overall, the present study demonstrates the feasibility of the concept and highlights its potential for further optimization and experimental validation., This research has been partly supported by grant PAID-11-25 by Vicerrectorado de Investigación de la Universitat Politècnica de València, (UPV). The author M. Bruerre thanks the Universitat Politècnica de València for his predoctoral contract, which is included within the framework of Programa de Apoyo para la Investigación y Desarrollo (PAID-01-22) del Vicerrectorado de Investigación.