Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2912
Encontrada(s) 30 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Design and commissioning of the miniBELEN neutron counter for the study of (α,n) reactions

  • Mont-Geli, N.
  • Tarifeño-Saldivia, A.
  • Pallàs, M.
  • Perea, A.
  • Fraile Prieto, Luis Mario
  • Cortés, G.
  • Briz Monago, José Antonio
  • Illana Sisón, Andrés
  • Martínez Nouvilas, Víctor
  • Udías Moinelo, José Manuel
The miniBELEN detector is a moderated neutron counter based on the use of 3He tubes and high-density polyethylene as moderator. The detector has been designed to have a neutron detection efficiency that is nearly independent from the initial neutron energy for (α,n) reactions with alpha-particle energies up to 15 MeV. In order to achieve that an innovative design methodology based on the use of cadmium neutron filters has been used. Monte Carlo calculations of the detector response have been validated using a 252Cf fission source. Measurements of the relatively well-known (α,n) thick target yields on aluminum have been found to be consistent with data from previous works. A method has been developed to correlate the counting rate ring ratios with the mean neutron energy and validated using previous time-of-flight measurements of the aluminum (α,n) spectra and with a 252Cf fission source.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of railway curve squeal in the time domain using a high-frequency vehicle/track interaction model

  • Giner Navarro, Juan|||0000-0002-0513-3625
  • Martínez Casas, José|||0000-0001-5706-4951
  • F. D. Denia|||0000-0003-4536-8610
  • Baeza González, Luis Miguel|||0000-0002-3815-8706
[EN] Railway curve squeal is an intense tonal and annoying type of noise commonly attributed to self-excited vibrations during curving. The mechanisms for its generation remain unclear and it is still a subject of discussion among researchers. Most of them have considered the falling behaviour of the friction coefficient with the slip velocity essential for reenergising the system. Recently, some authors have found that squeal can also appear even for constant friction coefficient through the wheel modal coupling between the normal and tangential directions caused by the wheel/rail contact. This paper particularly evaluates whether the latter mechanism is sufficient to find squeal in curving conditions. The introduction of flexibility in the railway subsystems is required to widen the domain to the high-frequency range in which squeal occurs. One single flexible and rotatory wheelset is considered and suitable forces are prescribed at the primary suspension seats in the current investigation. The rails are modelled through the Moving Element Method (MEM), permitting to extend the range of validity of beam models usually utilised in the literature. This work extends the formulation to rails supported by a viscoelastic Winkler bedding. Both wheelset and track models are coupled by means of a non-linear and unsteady wheel/rail contact model based on Kalker¿s Variational Theory. Simulation results for different track curvatures and friction coefficients are presented and discussed, showing tonal peaks in the tangential contact forces of the inner wheel. These results can be associated with squeal according to the characterisation of this phenomenon, indicating that squeal can be found in curving conditions using advanced dynamic interaction models even with constant friction coefficient., The authors gratefully acknowledge the financial support of Spanish Ministry of Economy, Industry and Competitiveness and the European Regional Development Fund (project TRA2017-84701-R), as well as Generalitat Valenciana (project Prometeo/2016/007) and European Commission through the project "RUN2Rail - Innovative RUNning gear soluTiOns for new dependable, sustainable, intelligent and comfortable RAIL vehicles" (Horizon 2020 Shift2Rail JU call 2017, grant number 777564).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Implementation and testing of a CAM postprocessor for an industrial redundant workcell with evaluation of several fuzzified Redundancy Resolution Schemes

  • Andrés de la Esperanza, Francisco Javier
  • Gracia Calandin, Luis Ignacio|||0000-0001-9258-9286
  • Tornero Montserrat, Josep|||0000-0003-1571-0251
This paper describes the implementation of a postprocessor to adapt the toolpath generated by a CAM system (NXTM) to a complex workcell of eight joints (namely, a KUKA KR15/2 manipulator mounted on a linear track and synchronized with a rotary table), devoted to the rapid prototyping of 3D CAD-defined products. Previously, it evaluates several Redundancy Resolution Schemes at the joint-rate level for the configuration of the postprocessor, dealing not only with the additional joints but also with the redundancy due to the symmetry on the milling tool. The use of these redundancies is optimized by adjusting two performance criterion vectors related to both singularity avoidance and maintenance of a preferred reference posture, as secondary tasks to be done during the path tracking. In addition, two proper fuzzy inference engines actively adjust the weight of each joint in these tasks. The postprocessor is validated in a real prototyping of a Valencian Falla., This research is partially supported by the Technical University of Valencia (PAID-00-09), project PROMETEO 2009/063 of Generalitat Valenciana and research project DPI2009-14744-C03-01 of the Spanish Government.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tuning the Photocatalytic Activity of Ti-Based Metal-Organic Frameworks through Modulator Defect-Engineered Functionalization

  • Abánades Lázaro, Isabel
  • Szalad, Horatiu
  • Valiente, Pablo
  • Martí-Gastaldo, Carlos
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Defect engineering is a valuable tool to tune the photocatalytic activity of metal-organic frameworks (MOFs). Inducing defects through the attachment of functionalized modulators can introduce cooperative units that can tune the bandgap of the material and enhance their chemical, thermal, and photostabilities among other properties. However, the majority of defect engineering studies for photocatalytic applications are limited to Zr-based MOFs, and there is still a lack of interrelation between synthetic variables, the resultant MOF properties, and their effect on their photocatalytic performance. We report a comprehensive study on the defect engineering of the titanium heterometallic MOF MW-10 by fluoro- and hydroxy-isophthalic acid (Iso) modulators, rationalizing the effect of the materials' properties on their photocatalytic activity for hydrogen production. The Iso-OH modified MOFs present a volcano-type profile with a 2.3-fold increase in comparison to the pristine materials, whereas the Iso-F modified samples have a gradual increase with up to a 4.2-fold enhancement. It has been demonstrated that similar to 9% of Iso-OH modulator incorporation produces similar to 40% defects, inducing band gap reduction and longer excited states lifetime. Similar defect percentages have been generated upon near 40% Iso-F modulator incorporation; however, negligible band gap changes and shorter excited states lifetimes were determined. The higher photocatalytic activity in Iso-F modulator derived MOF has been attributed to the effect of the divergent defect-compensation modes on the materials' photostability and to the increase in the external surface area upon introduction of Iso-F modulator., This publication is part of a project that has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska (Grant Agreement No. 837804, DefTiMOFs, MSCA-IF-2018). I.A.L. thanks the European Union's Horizon 2020 research and innovation programme for the receipt of Marie Sklodowska-Curie Actions Individual Fellowship and thanks The University of Valencia and Functional Materials Research Group for research facilities and the Maria de Maeztu Units of Excellence Programme (CEX-2019-000919-M). H.S. also thanks the European Union's Horizon 2020 research and innovation programme Solar2Chem, under the Marie Sklodowska-Curie Grant Agreement No. 861151. H.G. and J.A. acknowledge financial support by the Spanish Ministry of Science and Innovation (RTI2018-98237-CO2-1) and Generalitat Valenciana (Prometeo 2017-083).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental observation of higher-order anapoles in individual silicon disks under in-plane illumination

  • Díaz-Escobar, Evelyn
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Barreda-Gómez, Ángela Inmaculada
[EN] Anapole states¿characterized by a strong suppression of far-field scattering¿naturally arise in high-index nanoparticles as a result of the interference between certain multipolar moments. Recently, the first-order electric anapole, resulting from the interference between the electric and toroidal dipoles, was characterized under in-plane illumination as required in on-chip photonics. Here, we go a step further and report on the observation of higher-order (magnetic and second-order electric) anapole states in individual silicon disks under in-plane illumination. To do so, we increase the disk dimensions (radius and thickness) so that such anapoles occur at telecom wavelengths. Experiments show dips in the far-field scattering perpendicular to the disk plane at the expected wavelengths and the selected polarizations, which we interpret as a signature of high-order anapoles. Some differences between normal and in-plane excitation are discussed, in particular, the non-cancelation of the sum of the Cartesian electric and toroidal moments for in-plane incidence. Our results pave the way toward the use of different anapole states in photonic integrated circuits either on silicon or other high-index dielectric materials., This work was supported by Generalitat Valenciana under Grant No. GRISOLIAP/2018/164, the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) through the International Research Training Group (IRTG) 2675 "Meta-ACTIVE," Project No. 437527638, and Generalitat Valenciana (Grant Nos. PROMETEO/2019/123, IDIFEDER/2020/041, and IDIFEDER/2021/061).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Factors Affecting Entrepreneurship and Business Sustainability

  • Tur-Porcar, Ana
  • Llorca Mestre, Anna
  • Roig-Tierno, Norat|||0000-0002-7980-3548
[EN] Sustainability is becoming increasingly important for society, and the creation of business ventures is one area where sustainability is critical. We examined the factors affecting actions that are designed to foster business sustainability. These factors are related to the environment, behavior, human relations, and business activity. Based on questionnaire responses from experts, the Analytic Hierarchy Process (AHP) method was used to rank sustainable business criteria according to their importance for entrepreneurs starting sustainable businesses. The results indicate that the most important drivers of sustainable entrepreneurship are behavioral factors and business factors. Ethical principles and values, together with competitive intelligence, are crucial for undertaking actions that lead to sustainability., Funding support was provided by an R&D project for Research Teams of Excellence, PROMETEO Program (reference: GVPROMETEO/2015/003), and an R&D project funded by the Ministry of Economy and Competitiveness (reference: PSI2016-78242-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bridging the Gap between Distance and Generalization

  • Estruch Gregori, Vicente
  • Ferri Ramírez, César|||0000-0002-8975-1120
  • Hernández-Orallo, José|||0000-0001-9746-7632
  • Ramírez Quintana, María José|||0000-0002-0559-3568
Distance-based and generalization-based methods are two families of artificial intelligence techniques that have been successfully used over a wide range of real-world problems. In the first case, general algorithms can be applied to any data representation by just changing the distance. The metric space sets the search and learning space, which is generally instance-oriented. In the second case, models can be obtained for a given pattern language, which can be comprehensible. The generality-ordered space sets the search and learning space, which is generally model-oriented. However, the concepts of distance and generalization clash in many different ways, especially when knowledge representation is complex (e.g., structured data). This work establishes a framework where these two fields can be integrated in a consistent way. We introduce the concept of distance-based generalization, which connects all the generalized examples in such a way that all of them are reachable inside the generalization by using straight paths in the metric space. This makes the metric space and the generality-ordered space coherent (or even dual). Additionally, we also introduce a definition of minimal distance-based generalization that can be seen as the first formulation of the Minimum Description Length (MDL)/Minimum Message Length (MML) principle in terms of a distance function. We instantiate and develop the framework for the most common data representations and distances, where we show that consistent instances can be found for numerical data, nominal data, sets, lists, tuples, graphs, first-order atoms, and clauses. As a result, general learning methods that integrate the best from distance-based and generalization-based methods can be defined and adapted to any specific problem by appropriately choosing the distance, the pattern language and the generalization operator., We would like to thank the anonymous reviewers for their insightful comments. This work has been partially supported by the EU (FEDER) and the Spanish MICINN, under grant TIN2010-21062-C02-02, the Spanish project "Agreement Technologies" (Consolider Ingenio CSD2007-00022) and the GVA project PROMETEO/2008/051.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Differentiation between acute and chronic myocardial infarction by means of texture analysis of late gadolinium enhancement and cine cardiac magnetic resonance imaging

  • Larroza, A
  • Materka, A
  • López-Lereu, MP
  • Monmeneu-Menadas, JV
  • Bodi, V
  • Moratal, David|||0000-0002-2825-3646
[EN] The purpose of this study was to differentiate acute from chronic myocardial infarction using machine learning techniques and texture features extracted from cardiac magnetic resonance imaging (MRI). The study group comprised 22 cases with acute myocardial infarction (AMI) and 22 cases with chronic myocardial infarction (CMI). Cine and late gadolinium enhancement (LGE) MRI were analyzed independently to differentiate AMI from CMI. A total of 279 texture features were extracted from predefined regions of interest (ROIs): the infarcted area on LGE MRI, and the entire myocardium on cine MRI. Classification performance was evaluated by a nested cross-validation approach combining a feature selection technique with three predictive models: random forest, support vector machine (SVM) with Gaussian Kernel, and SVM with polynomial kernel. The polynomial SVM yielded the best classification performance. Receiver operating characteristic curves provided area-under-thecurve (AUC) (mean +/- standard deviation) of 0.86 +/- 0.06 on LGE MRI using 72 features; AMI sensitivity = 0.81 +/- 0.08 and specificity = 0.84 +/- 0.09. On cine MRI, AUC = 0.82 +/- 0.06 using 75 features; AMI sensitivity = 0.79 +/- 0.10 and specificity = 0.80 +/- 0.10. We concluded that texture analysis can be used for differentiation of AMI from CMI on cardiac LGE MRI, and also on standard cine sequences in which the infarction is visually imperceptible in most cases., This work was supported in part by the Spanish Ministerio de Economia y Competitividad (MINECO) and FEDER funds under grant BFU2015-64380-C2-2-R, by Instituto de Salud Carlos III and FEDER funds under grants FIS PI14/00271 and PIE15/00013 and by the Generalitat Valenciana under grant PROMETEO/2013/007. The first author, Andres Larroza, was supported by grant FPU12/01140 from the Spanish Ministerio de Educacion, Cultura y Deporte (MECD).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Strategies in Case-Based Argumentation-Based Negotiation: An Application for the Tourism Domain

  • Bouslama, Rihab
  • Amor, Nahla Ben
  • Jordán, Jaume|||0000-0003-0400-9136
  • Heras, Stella|||0000-0001-6212-9377
[EN] Negotiation is a key solution to find an agreement between conflicting parties especially during the purchase journey. This paper treats the negotiations between a travel agency and its customers in the domain of tourism. Both automated negotiation and argumentation are gathered to create a framework for automated agents, presenting a travel agency and its customers, to negotiate a trip and exchange arguments. Agents take advantage of their past experiences and use Case-Based Reasoning to select the best strategy to follow. We represent agents using two types of profiles, Argumentative profile that represents agents¿ ways of reasoning and Preference profile that embodies customers¿ preferences in the domain of tourism.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Why do we take risks? Perception of the situation and risk proneness predict domain-specific risk taking

  • Juan-Ripoll, Carla De
  • Marín-Morales, Javier|||0000-0003-1271-2892
  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
  • CHICCHI-GIGLIOLI, IRENE ALICE
  • Llanes-Jurado, José
[EN] Risk taking (RT) is a component of the decision-making process in situations that involve uncertainty and in which the probability of each outcome - rewards and/or negative consequences - is already known. The influence of cognitive and emotional processes in decision making may affect how risky situations are addressed. First, inaccurate assessments of situations may constitute a perceptual bias in decision making, which might influence RT. Second, there seems to be consensus that a proneness bias exists, known as risk proneness, which can be defined as the propensity to be attracted to potentially risky activities. In the present study, we take the approach that risk perception and risk proneness affect RT behaviours. The study hypothesises that locus of control, emotion regulation, and executive control act as perceptual biases in RT, and that personality, sensation seeking, and impulsivity traits act as proneness biases in RT. The results suggest that locus of control, emotion regulation and executive control influence certain domains of RT, while personality influences in all domains except the recreational, and sensation seeking and impulsivity are involved in all domains of RT. The results of the study constitute a foundation upon which to build in this research area and can contribute to the increased understanding of human behaviour in risky situations., This work was supported by the European Union's Horizon 2020 funded project "Modelling and predicting human decision making using measures of subconscious brain processes through mixed reality interfaces and biometric signals (RHUMBO)" (No 813234), the Spanish Ministry of Economy, Industry and Competitiveness funded project "Assessment and training on decision making in risk environments (ATEMIN)" (RTC-20176523-6; MINECO/AEI/FEDER, UE), and by the Generalitat Valenciana funded project "Mixed reality and brain decision (REBRAND)" (PROMETEO/2019/105).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Factorization of weakly compact operators between Banach spaces and Fréchet or (LB)-spaces

  • Bonet Solves, José Antonio|||0000-0002-9096-6380
  • Wright, J.D. Maitland
[EN] In this note we show that weakly compact operators from a Banach space X into a complete (LB)-space E need not factorize through a reflexive Banach space. If E is a Fréchet space, then weakly compact operators from a Banach space X into E factorize through a reflexive Banach space. The factorization of operators from a Fréchet or a complete (LB)-space into a Banach space mapping bounded sets into relatively weakly compact sets is also investigated., The research of the first author was partially supported by MEC and FEDER Project MTM2010-15200 and by GV Project Prometeo/2008/101. The support of the University of Aberdeen and the Universidad Polit´ecnica of Valencia is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

R&amp, D studies for the development of a compact transmitter able to mimic the acousticsignature of a UHE neutrino interaction

  • Ardid, Miguel|||0000-0002-3199-594X
  • Espinosa Roselló, Víctor|||0000-0001-8882-866X
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
  • Ferri García, Marcelino
  • Adrián Martínez, Silvia
  • Bou Cabo, Manuel
  • Larosa, Giuseppina
  • Martínez Mora, Juan Antonio
[EN] Calibration of acoustic neutrino telescopes with neutrino-like signals is essential to evaluate the feasibility of the technique and to know the efficiency of the detectors. However, it is not straightforward to have acoustic transmitters that, on one hand, are able to mimic the signature of a UHE neutrino interaction, that is, a bipolar acoustic pulse with the 'pancake' directivity, and on the other hand, fulfil practical issues such as ease of deployment and operation. This is a non-trivial problem since it requires directive transducer with cylindrical symmetry for a broadband frequency range. Classical solutions using linear arrays of acoustic transducers result in long arrays with many elements, which increase the cost and the complexity for deployment and operation. In this paper we present the extension of our previous R&D studies using the parametric acoustic source technique by dealing with the cylindrical symmetry and demonstrating that it is possible to use this technique for having a compact solution that could be much more easily included in neutrino telescope infrastructures or used in specific sea campaigns for calibration. © 2010 Elsevier B.V., This work has been supported by the Ministerio de Ciencia e Innovacio´n (Spain Government), project references FPA2007- 63729, FPA2009-13983-C02-02, ACI2009-1067 and ConsoliderIngenio Multidark (CSD2009-00064). It has also being funded by Generalitat Valenciana, Prometeo/2009/26.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Accurate characterization of single track-etched, conical nanopores

  • Apel, Pavel Yu
  • Blonskaya, Irina V.
  • Orelovitch, Oleg L.
  • Sartowska, Bozena A.
  • Ramirez Hoyos, Patricio|||0000-0002-0067-4887
Single track-etched conical nanopores in polymer foils have attracted considerable attention in recent years due to their potential applications in biosensing, nanofluidics, information processing, and other fields. The performance of a nanopore critically depends on the size and shape of its narrowest, nanometer-sized region. In this paper, we reconstructed the profiles of both doubly-conical and conical pores, using an algorithm based on conductometric measurements performed in the course of etching, coupled with SEM data. We showed that pore constriction deviates from the conical shape, and the deviation depends on the energy loss of the particle that produced the track. Funnel-like profiles of tracks of four ions with different atomic numbers were derived from experimental data. The simulations, using a Poisson–Nernst–Planck model, demonstrated that the ion current rectification properties of the funnel-shaped asymmetrical pores significantly differ from those of conical ones if the tip radius of the pore is smaller than 10 nm. Upon subjecting to further etching, the pores gradually approach the ‘‘ideal’’ conical geometry, and the ion transport properties of these two pore configurations become almost indistinguishable., The authors are grateful to the Material Research group (GSI Darmstadt) for providing irradiated samples. The authors thank O. M. Ivanov for the irradiation of the polymer foils with accelerated ions. The help with SEM imaging provided by N. E. Lizunov is also appreciated. P. R. acknowledges financial support from the Generalitat Valenciana (project PROMETEO/GV/0069), Ministry of Science and Innovation of Spain, Materials Program (project MAT2012-32084), and FEDER. This research has been partially supported by the Cooperation Program between Polish scientific institutions and JINR (theme 04-5-1076-2009/2014, regulation number 62 of February 11, 2013).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Expression of xyloglucan endotransglucosylase/hydrolase (XTH) genes and XET activity in ethylene treated apple and tomato fruits

  • Muñoz Bertomeu, Jesús
  • Miedes, Eva
  • Lorences, E. P.
[EN] Xyloglucan endotransglucosylase/hydrolase (XTHs: EC 2.4.1.207 and/or EC 3.2.1.151), a xyloglucan modifying enzyme, has been proposed to have a role during tomato and apple fruit ripening by loosening the cell wall. Since the ripening of climacteric fruits is controlled by endogenous ethylene biosynthesis, we wanted to study whether XET activity was ethylene-regulated, and if so, which specific genes encoding ripening-regulated XTH genes were indeed ethylene-regulated. XET specific activity in tomato and apple fruits was significantly increased by the ethylene treatment, as compared with the control fruits, suggesting an increase in the XTH gene expression induced by ethylene. The 25 SlXTH protein sequences of tomato and the 11 sequences MdXTH of apple were phylogenetically analyzed and grouped into three major clades. The SlXTHs genes with highest expression during ripening were SlXTHS and SlXTHS from Group III-B, and in apple MdXTH2, from Group II, and MdXTH10, and MdXTH11 from Group III-B. Ethylene was involved in the regulation of the expression of different SlXTH and MdXTH genes during ripening. In tomato fruit fifteen different SlXTH genes showed an increase in expression after ethylene treatment, and the SlXTHs that were ripening associated were also ethylene dependent, and belong to Group III-B (SlXTHS and SlXTHS). In apple fruit, three MdXTH showed an increase in expression after the ethylene treatment and the only MdXTH that was ripening associated and ethylene dependent was MdXTH10 from Group III-B. The results indicate that XTH may play an important role in fruit ripening and a possible relationship between XTHs from Group III-B and fruit ripening, and ethylene regulation is suggested. (C) 2013 Elsevier GmbH. All rights reserved., This work was funded by GVA, PROMETEO/2009/075. We wish to thank Mr. D.A. Lindsay for correcting the English version of the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dirichlet series from the infinite dimensional point of view

  • Defant, A.
  • García, Domingo
  • Maestre, Manuel
  • Sevilla Peris, Pablo|||0000-0001-5222-4768
[EN] A classical result of Harald Bohr linked the study of convergent and bounded Dirichlet series on the right half plane with bounded holomorphic functions on the open unit ball of the space c(0) f complex null sequences. Our aim here is to show that many questions in Dirichlet series have very natural solutions when, following Bohr's idea, we translate these to the infinite dimensional setting. Some are new proofs and other new results obtained by using that point of view., The authors were supported by MINECO and FEDER Project MTM2017-83262-C2-1-P. The second and third authors were also supported by Project Prometeo/2017/102 of the Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ultrafast all-optical phase switching enabled by epsilon-near-zero materials in silicon

  • Navarro-Arenas, Juan
  • Parra Gomez, Jorge|||0000-0003-4610-3411
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] Transparent conducting oxides (TCOs) have emerged as both particularly appealing epsilon-near-zero (ENZ) materials and remarkable candidates for the design and fabrication of active silicon nanophotonic devices. However, the leverage of TCO's ultrafast nonlinearities requires precise control of the intricate physical mechanisms that take place upon excitation. Here we investigate such behavior for ultrafast all-optical phase switching in hybrid TCO-silicon waveguides through numerical simulation. The model is driven from the framework of intraband-transition-induced optical nonlinearity. Transient evolution is studied with a phenomenological two-temperature model. Our results reveal the best compromise between energy consumption, insertion losses and phase change per unit length for enabling ultrafast switching times below 100 fs and compact active lengths in the order of several micrometers., Generalitat Valenciana (PROMETEOProgram (Ref.2019/123)); Agencia Estatal de Investigacion (FPU17/04224, ICTS-2017-28-UPV-9, PID2019-111460GB-I00).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structure determination of as-made zeolite ITQ-52 by three-dimensional electron diffraction

  • Tirado-Castaño, Juan Ignacio
  • Das, Partha Pratim
  • Palatinus, Luká
  • Plana-Ruiz, Sergi
  • Simancas, Jorge
  • Simancas, Raquel
  • Nicolopoulos, Stavros
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] The complete crystal structures of two as-made zeolites with the ITQ-52 structure (IFW framework type), where an alkylphosphonium and an aminophosphonium dications have been used as their respective organic structure-directing agents, have been solved by three-dimensional electron diffraction. Both organic cations have also been located within the 10-ring that connects the cavities of the IFW framework using the diffraction data., Authors acknowledge financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S and PID2022-136934OB-I00 grants funded by MCIN/AEI/10.13039/501100011033 and "ERDF A way of making Europe", and grant TED2021-130191B-C41 funded by MCIN/AEI/10.13039/501100011033 and "European Union Next Generation EU/PRTR") . Authors acknowledge also financial support from Generalitat Valenciana (Project Prometeo 2021/077 and project MFA/2022/047 funded by "Advanced Materials Programme" of Generalitat Valenciana "European Union Next Generation EU/PRTR") . J.I.T. acknowledges grant PRE2018-083623 from project SEV-2016-0683-18-3. The authors acknowledge the Electron Microscopy Service of the Polytechnique University of Valencia (UPV) , the Scientific and Technological Centers of the University of Barcelona (CCiTUB) and the CzechNanoLab Research Infrastructure supported by MEYS CR (LM2023051) for assistance in electron microscopy characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Preparation of Tremorine and Gemini Surfactant Precursors with Cationic Ethynyl-Bridged Digold Catalysts

  • Grirrane, Abdessamad|||0000-0001-5388-3554
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Alvarez-González, Eleuterio
[EN] Tremorine and precursors of gemini surfactants were synthesised in a one-pot, three-step, double-catalytic A3 coupling reaction and characterised by structural and spectroscopic methods. The cationic [Au-I(L1)]SbF6 complex is a more active catalyst compared to neutral L2- and L3-Au-I bis(trifluoromethanesulfonyl) imidate complexes (L1, L2= Buchwald-type biaryl phosphane; L3= triphenylphosphine) in promoting the double A(3) coupling of ethynyltrimethylsilane, secondary amines (cyclic, aliphatic, or aromatic) and formaldehyde. The solvent influences the catalytic performance by desilylation of silyl acetylene or deactivation of the catalyst by a halide anion. Acetylide-bridged cationic di-gold(I) L1 and L2 complexes were isolated and characterised by means of single-crystal X-ray structure analysis and their spectroscopic properties. Iodine in the acetylene reagent deactivates the AuI catalyst by formation of the less active iodido-bridged cationic digold(I) L1 complex, which was fully characterised by single-crystal X-ray crystal structure analysis and spectroscopy. The nature of the phosphine ligand of the gold complexes used as catalyst affects the stability and activity of the formed cationic ethynyl-bridged Au-2(I)-L intermediates, isolation of which lends support to the proposed double A(3) coupling mechanism., Financial support by the Spanish Ministry of Economy and Competitiveness (Severo Ochoa and CTQ2015-69153-CO<INF>2</INF>-R1) and Generalidad Valenciana (Prometeo 2013-014) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of the Effect of Inorganic Particles on the Gas Transport Properties of Glassy Polyimides for Selective CO2 and H2O Separation

  • Escorihuela-Roca, Sara
  • Valero, Lucía
  • Tena, Alberto
  • Shishatskiy, Sergey
  • Brinkmann, Torsten
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Three polyimides and six inorganic fillers in a form of nanometer-sized particles were studied as thick film solution cast mixed matrix membranes (MMMs) for the transport of CO2, CH4, and H2O. Gas transport properties and electron microscopy images indicate good polymer-filler compatibility for all membranes. The only filler type thatdemonstrated good distribution throughout the membrane thickness at 10 wt.% loading was BaCe0.2Zr0.7Y0.1O3 (BCZY). The influence of this filler on MMM gas transport properties was studied in detail for 6FDA-6FpDA in a filler content range from one to 20 wt.% and for Matrimid((R)) and P84((R)) at 10 wt.% loading. The most promising result was obtained for Matrimid((R))10 wt.% BCZY MMM, which showed improvement in CO2 and H2O permeabilities accompanied by increased CO2/CH4 selectivity and high water selective membrane at elevated temperatures without H2O/permanent gas selectivity loss., This work was financially supported by the Spanish Government (SEV-2016-0683, SVP-2014-068356, Project ENE2014-57651-R and IJCI-2016-28330 grants) and GeneralitatValenciana (PROMETEO/2018/006 grant) and Helmholtz-Zentrum Geesthacht (HZG) through the technology transfer project program and by the Helmholtz Association of German Research Centers through the Helmholtz Portfolio MEMBRAIN.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Automatic Segmentation of Epidermis and Hair Follicles in Optical Coherence Tomography Images of Normal Skin by Convolutional Neural Networks

  • del Amor, Rocío
  • Morales, Sandra|||0000-0003-0763-1545
  • Colomer, Adrián|||0000-0002-7616-6029
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
  • Mogensen, Mette
  • Jensen, Mikkel
  • Israelsen, Niels M.
  • Bang, Ole
[EN] Optical coherence tomography (OCT) is a well-established bedside imaging modality that allows analysis of skin structures in a non-invasive way. Automated OCT analysis of skin layers is of great relevance to study dermatological diseases. In this paper, an approach to detect the epidermal layer along with the follicular structures in healthy human OCT images is presented. To the best of the authors' knowledge, the approach presented in this paper is the only epidermis detection algorithm that segments the pilosebaceous unit, which is of importance in the progression of several skin disorders such as folliculitis, acne, lupus erythematosus, and basal cell carcinoma. The proposed approach is composed of two main stages. The first stage is a Convolutional Neural Network based on U-Net architecture. The second stage is a robust post-processing composed by a Savitzky-Golay filter and Fourier Domain Filtering to fully define the borders belonging to the hair follicles. After validation, an average Dice of 0.83 +/- 0.06 and a thickness error of 10.25 mu mis obtained on 270 human skin OCT images. Based on these results, the proposed method outperforms other state-of-the-art methods for epidermis segmentation. It demonstrates that the proposed image segmentation method successfully detects the epidermal region in a fully automatic way in addition to defining the follicular skin structures as main novelty., This work has been partially supported by Horizon 2020, the European Union's Framework Programme for Research and Innovation, under grant agreement No. 732613 (GALAHAD Project), the Spanish Ministry of Economy and Competitiveness through project DPI2016-77869, and GVA through project PROMETEO/2019/109. The OCT system and the work of NI were funded by Innovation Fund Denmark, Grant No. 4107-00011A (ShapeOCT).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Headphone-Based virtual spatialization of sound with a GPU accelerator

  • Belloch Rodríguez, José Antonio
  • Ferrer Contreras, Miguel|||0000-0002-8743-1887
  • Gonzalez, Alberto|||0000-0002-6984-3212
  • Martínez Zaldívar, Francisco José|||0000-0002-7845-6273
  • Vidal Maciá, Antonio Manuel
[EN] Multichannel audio signal processing has undergone major development in recent years. The incorporation of spatial information into an immersive audiovisual virtual environment or into video games provides a better sense of ¿presence¿ to applications. In a binaural system, spatial sound consists of reproducing audio signals with spatial cues (spatial information embedded in the sound) through headphones. This spatial information allows the listener to identify the virtual positions of the sources corresponding to different sounds. Headphone-based spatial sound is obtained by filtering different sound sources through a collection of special filters (whose frequency responses are called Head-Related Transfer Functions) prior to rendering them through headphones. These filters belong to a database composed by a limited number of spatial fixed positions. A complete audio application that can render multiple sound sources in any position of the space and virtualize movements of sound sources in real time demands high computing needs. Graphics Processing Units (GPUs) are highly parallel programmable coprocessors that provide massive computation when the needed operations are properly parallelized. This paper presents the design of a headphone-based multisource spatial audio application whose main feature is that all required processing is carried out on the GPU. To this end, two solutions have been approached in order to synthesize sound sources in spatial positions that are not included in the database and to virtualize sound sources movements between different spatial positions. The results show that the proposed application is able to move up to 240 sources simultaneously ., This work has been partially funded by Spanish Ministerio de Economia (TEC2009-13741 and TEC2012-38142-C04-01) and EU through FEDER funds, Generalitat Valenciana PROMETEO 2009/2013, and Universitat Politecnica de Valencia through Programa de Apoyo a la Investigacion y Desarrollo (PAID-05-11 and PAID-05-12).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

MultiBaC: A strategy to remove batch effects between different omic data types

  • Ugidos, Manuel
  • Conesa, Ana
  • Tarazona, Sonia|||0000-0001-5346-1407
  • Prats-Montalbán, José Manuel|||0000-0001-6294-4486
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] Diversity of omic technologies has expanded in the last years together with the number of omic data integration strategies. However, multiomic data generation is costly, and many research groups cannot afford research projects where many different omic techniques are generated, at least at the same time. As most researchers share their data in public repositories, different omic datasets of the same biological system obtained at different labs can be combined to construct a multiomic study. However, data obtained at different labs or moments in time are typically subjected to batch effects that need to be removed for successful data integration. While there are methods to correct batch effects on the same data types obtained in different studies, they cannot be applied to correct lab or batch effects across omics. This impairs multiomic meta-analysis. Fortunately, in many cases, at least one omics platform-i.e. gene expression- is repeatedly measured across labs, together with the additional omic modalities that are specific to each study. This creates an opportunity for batch analysis. We have developed MultiBaC (multiomic Multiomics Batch-effect Correction correction), a strategy to correct batch effects from multiomic datasets distributed across different labs or data acquisition events. Our strategy is based on the existence of at least one shared data type which allows data prediction across omics. We validate this approach both on simulated data and on a case where the multiomic design is fully shared by two labs, hence batch effect correction within the same omic modality using traditional methods can be compared with the MultiBaC correction across data types. Finally, we apply MultiBaC to a true multiomic data integration problem to show that we are able to improve the detection of meaningful biological effects., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This work is part of a research project that is totally funded by Conselleria d'Educacio, Cultura i Esport (Generalitat Valenciana) through PROMETEO grants program for excellence research groups.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The 2D Dependency Pair Framework for Conditional Rewrite Systems¿Part II: Advanced Processors and Implementation Techniques

  • Lucas Alba, Salvador|||0000-0001-9923-2108
  • Gutiérrez Gil, Raúl|||0000-0002-3984-2868
  • Meseguer, José
[EN] Proving termination of programs in `real-life¿ rewriting-based languages like CafeOBJ, Haskell, Maude, etc., is an important subject of research. To advance this goal, faithfully cap- turing the impact in the termination behavior of the main language features (e.g., conditions in program rules) is essential. In Part I of this work, we have introduced a 2D Dependency Pair Framework for automatically proving termination properties of Conditional Term Rewriting Systems. Our framework relies on the notion of processor as the main practical device to deal with proofs of termination properties of conditional rewrite systems. Processors are used to decompose and simplify the proofs in a divide and conquer approach. With the basic proof framework defined in Part I, here we introduce new processors to further improve the abil- ity of the 2D Dependency Pair Framework to deal with proofs of termination properties of conditional rewrite systems. We also discuss relevant implementation techniques to use such processors in practice., Partially supported by the EU (FEDER) and projects RTI2018-094403-B-C32, PROMETEO/2019/098, SP20180225. Jose Meseguer was supported by grants NSF CNS 13-19109 and NRL N00173-17-1-G002. Salvador Lucas' research was partly developed during a sabbatical year at the UIUC.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Plant virus evolution under strong drought conditions results in a transition from parasitism to mutualism

  • González, Rubén
  • Butkovic, Anamarija
  • Escaray, Francisco J.
  • Martínez-Latorre, Javier
  • Melero, Izan
  • Pérez-Parets, Enric
  • Gómez-Cadenas, Aurelio
  • Carrasco, Pedro
  • Elena, Santiago F.
[EN] Environmental conditions are an important factor driving pathogens' evolution. Here, we explore the effects of drought stress in plant virus evolution. We evolved turnip mosaic potyvirus in well-watered and drought conditions in Arabidopsis thaliana accessions that differ in their response to virus infection. Virus adaptation occurred in all accessions independently of watering status. Drought-evolved viruses conferred a significantly higher drought tolerance to infected plants. By contrast, nonsignificant increases in tolerance were observed in plants infected with viruses evolved under standard watering. The magnitude of this effect was dependent on the plant accessions. Differences in tolerance were correlated to alterations in the expression of host genes, some involved in regulation of the circadian clock, as well as in deep changes in the balance of phytohormones regulating defense and growth signaling pathways. Our results show that viruses can promote host survival in situations of abiotic stress, with the magnitude of such benefit being a selectable trait., We thank Francisca de la Iglesia and Paula Agudo for excellent technical assistance. This work was supported by Grants PID2019103998GB-I00 and BES-2016-077078 (Agencia Estatal de Investigacion-Fondo Europeo de Desarrollo Regional) to S.F.E. and R.G., respectively; GRISOLIAP/2018/005 and PROMETEU2019/012 (Generalitat Valenciana) to S.F.E.; and AICO/2019/150 (Generalitat Valenciana) to A.G.-C. Phytohormone measurements were performed at the Servei Central d'Instrumentacio Cientifica of Universitat Jaume I.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Propene epoxidation with H2/H2O/O-2 mixtures over gold atoms supported on defective graphene: A theoretical study

  • Pulido, Angeles
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The mechanism of propene epoxidation by H-2/H2O/O-2 mixtures catalyzed by gold atoms supported on defective graphene has been investigated by means of periodic density functional theory (DFT) calculations. The fact of being isolated and yet strongly bound to the support gold atoms makes formation of gold hydroperoxide H-Au-OOH intermediates from H-2 and O-2 barrierless and the subsequent reaction with propene yielding propene oxide (PO) and H2O thermodynamically and kinetically favored. The main advantage of the Au/graphene material explored in this work is not related to catalyst activity but to the selectivity toward PO that is greatly enhanced due to suppression of the main competing routes. Thus, neither propene hydrogenation yielding propane nor O-2 dissociation finally resulting in acrolein formation and/or propene combustion can compete with the desired epoxidation. The present results suggest a promising route to prepare active and highly selective gold-based catalysts for propene epoxidation, The authors thank Spanish MINECO (MAT2011-28009 and Consolider Ingenio 2010-MULTICAT, CSD2009-00050) and Generalitat Valenciana (PROMETEO/2008/130) for financial support and Red Espanola de Supercomputacion (RES) and Centre de Calcul de la Universitat de Valencia for offering computing facilities and technical assistance. A. P. thanks Spanish MINECO (Juan de la Cierva program) for her grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Spin transition and symmetry-breaking in new mononuclear FeII tren-complexes with up to 38 K hysteresis around room temperature

  • Seredyuk, Maksym
  • Znovjyak, Kateryna
  • Valverde-Muñoz, Francisco Javier
  • Fritsky, Igor O.
  • Amirkhanov, Volodymyr
  • Real, Jose A.
  • Muñoz Roca, María Del Carmen|||0000-0003-2630-3897
[EN] The structurally simple complex {Fe-II[tren(6F-py)(3)]}(BF4)(2) [tren(6F-py)(3) = tris(3-aza-4-(6-fluoro-2-pyridyl)-3-butenyl)amine] undergoes an abrupt spin transition (ST) with the critical temperature T down arrow(1/2) = 243 K on cooling and T up arrow(1/2) = 281 K on heating, with a 38 K wide hysteresis, while the ClO4- congener shows ST spanning the room temperature region at T down arrow(1/2) = 267 K and T up arrow(1/2) = 295 K with a 28 K wide hysteresis. Calorimetric data confirm the occurrence of a highly energetic ST process, while multi-temperature single crystal X-ray structural studies identify a concerted symmetry-breaking P2(1)/n <-> P2(1)/c as the origin of the rare strong cooperativity and the large hysteresis loop. The analysis of the experimental data discloses two distinct interdependent events, namely, the combination of a gradual ST and an induced crystallographic phase transition, which endows the material with strong bistability and makes it an excellent platform for investigating new generations of ST based electronic and spintronic devices., This work was supported by grant PID2019-106147GB-I00 funded by MCIN/AEI/10.13039/501100011033, Unidad de Excelencia Maria de Maeztu (CEX2019-000919-M); the Generalitat Valenciana through PROMETEO/2016/147 and EU Framework FET-OPEN project COSMICS (grant agreement 766726), by the grant of the Ministry of Education and Science of Ukraine for perspective development of a scientific direction "Mathematical sciences and natural sciences" at Taras Shevchenko National University of Kyiv. We thank Prof. Dr Eric Collet for invaluable comments and suggestions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Invariant subspaces of the integration operators on Hörmander algebras and Korenblum type spaces

  • Bonet Solves, José Antonio|||0000-0002-9096-6380
  • Galbis, Antonio
[EN] We describe the proper closed invariant subspaces of the integration operator when it acts continuously on countable intersections and countable unions of weighted Banach spaces of holomorphic functions on the unit disc or the complex plane. Applications are given to the case of Korenblum type spaces and Hormander algebras of entire functions., This research was partially supported by the Projects MTM2016-76647-P and GV Prometeo/2017/102.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrophysiological and Structural Remodeling in Heart Failure Modulate Arrhythmogenesis. 1D Simulation Study

  • Gómez García, Juan Francisco
  • Cardona, Karen
  • Romero Pérez, Lucia|||0000-0003-4605-8630
  • Ferrero De Loma-Osorio, José María|||0000-0003-4200-9225
  • Trenor Gomis, Beatriz Ana|||0000-0001-9166-6112
Background: Heart failure is a final common pathway or descriptor for various cardiac pathologies. It is associated with sudden cardiac death, which is frequently caused by ventricular arrhythmias. Electrophysiological remodeling, intercellular uncoupling, fibrosis and autonomic imbalance have been identified as major arrhythmogenic factors in heart failure etiology and progression. Objective: In this study we investigate in silico the role of electrophysiological and structural heart failure remodeling on the modulation of key elements of the arrhythmogenic substrate, i.e., electrophysiological gradients and abnormal impulse propagation. Methods: Two different mathematical models of the human ventricular action potential were used to formulate models of the failing ventricular myocyte. This provided the basis for simulations of the electrical activity within a transmural ventricular strand. Our main goal was to elucidate the roles of electrophysiological and structural remodeling in setting the stage for malignant life-threatening arrhythmias. Results: Simulation results illustrate how the presence of M cells and heterogeneous electrophysiological remodeling in the human failing ventricle modulate the dispersion of action potential duration and repolarization time. Specifically, selective heterogeneous remodeling of expression levels for the Na+ /Ca2+ exchanger and SERCA pump decrease these heterogeneities. In contrast, fibroblast proliferation and cellular uncoupling both strongly increase repolarization heterogeneities. Conduction velocity and the safety factor for conduction are also reduced by the progressive structural remodeling during heart failure. Conclusion: An extensive literature now establishes that in human ventricle, as heart failure progresses, gradients for repolarization are changed significantly by protein specific electrophysiological remodeling (either homogeneous or heterogeneous). Our simulations illustrate and provide new insights into this. Furthermore, enhanced fibrosis in failing hearts, as well as reduced intercellular coupling, combine to increase electrophysiological gradients and reduce electrical propagation. In combination these changes set the stage for arrhythmias., This work was partially supported by (i) the "VI Plan Nacional de Investigacion Cientifica, Desarrollo e Innovacion Tecnologica" from the Ministerio de Economia y Competitividad of Spain (grant number TIN2012-37546-C03-01) and the European Commission (European Regional Development Funds - ERDF - FEDER), (ii) the Direccion General de Politica Cientifica de la Generalitat Valenciana (grant number GV/2013/119), and (iii) Programa Prometeo (PROMETEO/2012/030) de la Conselleria d'Educacio Formacio I Ocupacio, Generalitat Valenciana. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

FIWARE based low-cost wireless acoustic sensor network for monitoring and classification of urban soundscape

  • Arce Vila, Pau|||0000-0001-5726-9228
  • Piñero, Gema|||0000-0002-8719-8106
  • Gonzalez, Alberto|||0000-0002-6984-3212
  • Salvo, David
[EN] This work presents a wireless acoustic sensor network (WASN) that monitors urban environments by recognizing a given set of sound events or classes. The nodes of the WASN are Raspberry Pi devices that not only record the ambient sound, but also detect and recognize different sound events. All the signal processing tasks, from the recording to the classification carried out by a convolutional neural network (CNN), are run on Raspberry Pi devices. Due to the low cost of the proposed acoustic nodes, the system exhibits a very high potential scalability. Regarding the underlying WASN, it has been designed according to the open standard FIWARE, thus the whole system can be deployed without the need of proprietary software. Regarding the performance of the sound classifier, the proposed WASN achieves similar accuracy compared to other WASNs that make use of cloud computing. However, the proposed WASN significantly minimizes the network traffic since it does not exchange audio signals, but only contextual information in form of labels. On the other hand, most of the time the class reported by the WASN nodes is the "background'' soundscape, which usually contains no event of interest. This is the case when monitoring the soundscape of big avenues, where four events have been identified: "traffic'', "siren'', "horn'' and "noisy vehicles'', being the "traffic'' class associated to the background soundscape. In this paper, the use of a simple pre-detection stage prior to the CNN classification is proposed, with the aim of saving computation and power consumption at the nodes. The pre-detection stage is able to differentiate the other three relevant sounds from the "traffic'' and activates the classifier only when some of these three events is likely occurring. The proposed pre-detection stage has been validated through data recorded in the city of Valencia (Spain), achieving a reduction of the Raspberry Pi CPU's usage by a factor of six., This work has been partially supported by European Commission (EC) through GA 774477 -MAtchUP, EC together with Spanish Government through RTI2018-098085-B-C41 (MINECO/FEDER) and Generalitat Valenciana through PROMETEO/2019/109. Authors would like to thank Daniel Sanz Montrull for aid in data collection.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of morphology and composition of spherical layered double hydroxide particles and derived mixed oxides on photocatalytic CO 2 reduction

  • Molina-Muriel, Manuel
  • Eledath-Changarath, Mahesh
  • Dhingra, Archit
  • Sánchez-Royo, J. F.
  • Ribera, Antonio
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Considering the flexibility in the synthesis that allows the formation of materials with more than two metals, the present study reports the preparation of trimetallic layered double hydroxides (LDHs) having Al as structural tripositive cation, Ti as photocatalytically active d 0 transition metal and either Ni or Co as dipositive cation. In addition, these LDHs were used as precursors of the corresponding trimetallic mixed oxides (MO). LDH and MO materials in combination with Ru(bpy) 3 Cl 2 as photosensitizer and triethanolamine as sacrificial electron donor were used as catalysts for CO 2 reduction under solar light irradiation. A different product selectivity, either CH 4 for Ni-LDH or CO and H 2 for Co -MO, was observed with production rates for CH 4 or CO that are among the highest reported for these systems. The role of the inorganic materials in the photocatalytic process was supported by transient absorption spectroscopy that revealed the quenching of the Ru(bpy) 3 Cl 2 triplet excited state by Ni-LDH or Co -MO. An important finding was that the trimetallic Co -Ti -Al oxide with cobaltite structure is able to perform CO 2 reduction in spite that the reduction potential of its conduction band is not sufficient to perform the process, evidence by photoluminescence revealing the existence of an upper electronic state responsible for the reduction. These results show the interest in screening multimetallic materials in photocatalysis due to their improved performance and diverse properties., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S, PID2021-0126071-OB-CO21 and PID2021- 125907NB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER) and Generalitat Valenciana (Prometeo 2021-038, CIPROM- 2022-60 and Advanced Materials Program MFA-2022-023 and MFA- 2022-057 with funding from European Union Next Generation EU PRTR-C17.I1) are gratefully acknowledged. M. M. thanks the Universitat Politecnica de Valencia for a postgraduate scholarship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On Products of Generalised Supersoluble Finite Groups

  • Ballester-Bolinches, A.
  • Fakieh, W. M.
  • Pedraza Aguilera, María Carmen|||0000-0003-0888-9310
[EN] In this paper, mutually sn-permutable subgroups of groups belonging to a class of generalised supersoluble groups are studied. Some analogs of known theorems on mutually sn-permutable products are established., This research project was funded by the Deanship of Scientific Research (DSR) at King Abdulaziz University, under grant no.(RG-10-130-37). The first and second authors, therefore, acknowledge with thanks DSR for technical and financial support. The first and third authors are supported by Prometeo/2017/057 of Generalitat (Valencian Community, Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On sigma-subnormality criteria in finite sigma-soluble groups

  • Ballester-Bolinches, A.
  • Kamornikov, S. F.
  • Pérez-Calabuig, V.
  • Pedraza Aguilera, María Carmen|||0000-0003-0888-9310
[EN] Let sigma = {sigma(i) : i is an element of I} be a partition of the set P of all prime numbers. A subgroup X of a finite group G is called sigma-subnormal in G if there is a chain of subgroups X = X-0 subset of X-1 subset of center dot center dot center dot subset of X-n = G where for every j = 1,..., n the subgroup X j-1 is normal in X j or X j /CoreX j ( X j-1) is a si -group for some i. I. In the special case that s is the partition of P into sets containing exactly one prime each, the sigma-subnormality reduces to the familiar case of subnormality. In this paper some sigma-subnormality criteria for subgroups of s-soluble groups, or groups in which every chief factor is a sigma(i)-group, for some sigma(i) sigma s, are showed., The first and third authors are supported by the grant PGC2018-095140-B-I00 from the Ministerio de Ciencia, Innovacion y Universidades and the Agencia Estatal de Investigacion, Spain, and FEDER, European Union and Prometeo/2017/057 of Generalitat (Valencian Community, Spain). The second author was supported by the State Program of Science Researchers of the Republic of Belarus (Grant 19-54 "Convergence-2020").
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

From Simultaneous to Streaming Machine Translation by Leveraging Streaming History

  • Iranzo-Sánchez, Javier
  • Civera Saiz, Jorge|||0000-0002-0963-0143
  • Juan, Alfons|||0000-0002-9984-4072
[EN] Simultaneous Machine Translation is the task of incrementally translating an input sentence before it is fully available. Currently, simultaneous translation is carried out by translating each sentence independently of the previously translated text. More generally, Streaming MT can be understood as an extension of Simultaneous MT to the incremental translation of a continuous input text stream. In this work, a state-of-the-art simultaneous sentencelevel MT system is extended to the streaming setup by leveraging the streaming history. Extensive empirical results are reported on IWSLT Translation Tasks, showing that leveraging the streaming history leads to significant quality gains. In particular, the proposed system proves to compare favorably to the best performing systems., The research leading to these results has received funding from the European Union¿s Horizon 2020 research and innovation programme under grant agreements no. 761758 (X5Gon) and 952215 (TAILOR), and Erasmus+ Education programme under grant agreement no. 20-226-093604-SCH (EXPERT); the Government of Spain¿s grant RTI2018-094879-B-I00 (Multisub) funded by MCIN/AEI/10.13039/501100011033 & ¿ERDF A way of making Europe¿, and FPU scholarships FPU18/04135; and the Generalitat Valenciana¿s research project Classroom Activity Recognition (ref. PROMETEO/2019/111). The authors gratefully acknowledge the computer resources at Artemisa, funded by the European Union ERDF and Comunitat Valenciana as well as the technical support provided by the Instituto de Física Corpuscular, IFIC (CSIC-UV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A New Branch-and-Cut Algorithm for the Generalized Directed Rural Postman Problem

  • Ávila, Thais
  • Corberán, Ángel
  • Plana, Isaac
  • Sanchís Llopis, José María
The generalized directed rural postman problem, also known as the close-enough arc routing problem, is an arc routing problem with some interesting real-life applications, such as routing for meter reading. In this article we introduce two new formulations for this problem as well as various families of new valid inequalities that are used to design and implement a branch-and-cut algorithm. The computational results obtained on test bed instances from the literature show that this algorithm outperforms the existing exact methods, The authors wish to thank Minh Hoang Ha, Nathalie Bostel, Andre Langevin, and Louis-Martin Rousseau for providing their instances. The authors also thank the Spanish Ministerio de Economia y Competitividad [project MTM2012-36163-C06-02] and the Generalitat Valenciana [project GVPROMETEO2013-049] for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Silver Nanoparticles Supported on Diamond Nanoparticles as a Highly Efficient Photocatalyst for the Fenton Reaction under Natural Sunlight Irradiation

  • Espinosa López, Juan Carlos
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
Diamond nanoparticles (NPs) purified conveniently by Fenton oxidn. and modified by a subsequent H2 annealing redn. (D3) are an adequate support for small Ag NPs that are highly active as a (photo-&#8203;)&#8203;Fenton catalyst for phenol degrdn. The efficiency of the reaction is accelerated upon exposure to natural sunlight. Ag&#8203;/D3 is fairly stable under the reaction conditions and could be reused eight times with a marginal decrease in activity to reach an accumulated turnover no. of 472 000. Upon sunlight illumination, Ag&#8203;/D3 can be active even at quasineutral pH values, although an increase of the phenol degrdn. rate is obsd. if the initial pH value decreases to 4. Ag&#8203;/D3 was more efficient than Ag NPs supported on graphite, active carbon, or TiO2 and similar to Au&#8203;/D3. Thus, it seems that Ag&#8203;/D3 is one of most efficient heterogeneous (photo-&#8203;)&#8203;Fenton catalysts ever reported., Financial support by the Spanish Ministry of Economy and Competitiveness (Severo Ochoa and CTQ2012-32315) is gratefully acknowledged. Generalidad Valenciana is also thanked for funding (Prometeo 2012/013).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Selective aerobic oxidation of activated alkanes with MOFs and their use for epoxidation of olefins with oxygen in a tandem reaction

  • Luz Mínguez, Ignacio
  • Leon Peris, Adela
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] MOFs with Cu2+ centers linked to four nitrogen atoms from azaheterocyclic compounds, i.e., pyrimidine [Cu(2-pymo)(2)] and imidazole [Cu(im)(2)], are active catalysts for aerobic oxidation of activated alkanes, such as tetralin, cumene and ethylbenzene. Differences in activity among the two MOFs appear to be related to differences in their ability to decompose the hydroperoxide and to coordinate to the resulting radical (OH)-O-center dot species. Copper ions in [Cu(im)(2)] can coordinate by expanding their coordination sphere from 4 to 5 in a reversible way, while in the case of [Cu(2-pymo)(2)] it results in a displacement of one of the pyrimidine ligands. The MOFs can be used in combination with a silylated Ti-MCM-41 to catalyze the epoxidation of olefins with oxygen by means of a tandem reaction in which the MOF produces cumene hydroperoxide, which is used by Ti-MCM-41 to epoxidize the olefin., Financial support by Ministerio de Educacion y Ciencia e Innovacion (Project MIYCIN, CSD2009-00050; PROGRAMA CONSOLIDER. INGENIO 2009), Generalidad Valenciana (GV PROMETEO/2008/130) and CSIC (Proyectos Intramurales Especiales 201080I020) is gratefully acknowledged. CSIC and Fundacion Bancaja are gratefully acknowledged for a research contract to I.L. AL thanks the ITQ for a postgraduate scholarship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Floquet Phonon Lasing in Multimode Optomechanical Systems

  • Mercadé, Laura|||0000-0002-4994-7727
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Pelka, Karl
  • Burgwal, Roel
  • Xuereb, André
  • Verhagen, Ewold
[EN] Dynamical radiation pressure effects in cavity optomechanical systems give rise to self-sustained oscillations or 'phonon lasing' behavior, producing stable oscillators up to GHz frequencies in nanoscale devices. Like in photonic lasers, phonon lasing normally occurs in a single mechanical mode. We show here that mode-locked, multimode phonon lasing can be established in a multimode optomechanical system through Floquet dynamics induced by a temporally modulated laser drive. We demonstrate this concept in a suitably engineered silicon photonic nanocavity coupled to multiple GHz-frequency mechanical modes. We find that the long-term frequency stability is significantly improved in the multimode lasing state as a result of the mode locking. These results provide a path toward highly stable ultracompact oscillators, pulsed phonon lasing, coherent waveform synthesis, and emergent many-mode phenomena in oscillator arrays., The authors thank Javier del Pino for useful discussions. This work is supported by the European Union's Horizon 2020 research and innovation program under Grant Agreements No. 732894 (FET Proactive HOT), 713450 (FET-Open PHENOMEN), and 945915 (SIOMO), the Spanish State Research Agency (PGC2018-094490-BC21) and by the Juilan Schwinger Foundation project grant No. JSF-16-03-0000 (TOM). It is part of the research program of the Netherlands Organisation for Scientific Research (NWO). A. M. acknowledges funding from Generalitat Valenciana under Grants No. PROMETEO/2019/123, BEST/2020/178, and IDIFEDER/2018/033. E. V. acknowledges support from the European Research Council (ERC Starting Grant No. 759644-TOPP).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

First-principles design of highly active and selective catalysts for phosgene-free synthesis of aromatic polyurethanes

  • Laursen ., Siris Odin
  • Cómbita Merchán, Diego Fernando
  • Hungría, Ana B.
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
We thank the Generalitat Valenciana (GV/2009/063 and PROM-ETEO 2088/130) and the Spanish MICINN (MAT2011-28009, and Consolider Ingenio 2010-MULTICAT: CSD2009-00050) for financial support. We thank Red Espanola de Supercomputacion (RES) for computational resources. D.C. thanks Spanish MICINN for a postgraduate scholarship, and S.L. thanks ITQ for a post-doctoral fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Scalable UWB photonic generator based on the combination of doublet pulses

  • Moreno, Vanessa
  • Rius Mercado, Manuel
  • Muriel, Miguel A.
  • Mora Almerich, José|||0000-0002-2877-4118
  • Capmany Francoy, José|||0000-0002-6460-4167
We propose and experimentally demonstrate a scalable and reconfigurable optical scheme to generate high order UWB pulses. Firstly, various ultra wideband doublets are created through a process of phase-to-intensity conversion by means of a phase modulation and a dispersive media. In a second stage, doublets are combined in an optical processing unit that allows the reconfiguration of UWB high order pulses. Experimental results both in time and frequency domains are presented showing good performance related to the fractional bandwidth and spectral efficiency parameters., The research leading to these results has been funded by the national project TEC2010-21303-C04-02 and TEC2011-26642 funded by the Ministerio de Economia y Competitividad and the projects FEDER UPVOV08-3E-008 and UPVOV10-3E-492. Also, the authors wish to acknowledge the financial support given by the Generalitat Valenciana under the Research Excellency Award Program GVA PROMETEO 2013/012 Next Generation Microwave Photonic technologies.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

King-Type Derivative-Free Iterative Families: Real and Memory Dynamics

  • Chicharro, Francisco I.|||0000-0001-9116-2870
  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Vassileva, M.P.
[EN] A biparametric family of derivative-free optimal iterative methods of order four, for solving nonlinear equations, is presented. From the error equation of this class, different families of iterative schemes with memory can be designed increasing the order of convergence up to six. The real stability analysis of the biparametric family without memory is made on quadratic polynomials, finding areas in the parametric plane with good performance.Moreover, in order to study the real behavior of the parametric class with memory, we associate it with a discrete multidimensional dynamical system. By analyzing the fixed and critical points of its vectorial rational function, we can select those methods with best stability properties., This research was partially supported by Ministerio de Economia y Competitividad under Grants MTM2014-52016-C2-2-P, Generalitat Valenciana PROMETEO/2016/089, and FONDOCYT 2014-1C1-088 Republica Dominicana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A Deep Embedded Framework for Spitzoid Neoplasm Classification Using DNA Methylation Data

  • del Amor, Rocío
  • Colomer, Adrián|||0000-0002-7616-6029
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
  • Monteagudo, Carlos
  • Garzón, María José
  • García-Giménez, José Luis
[EN] Spitzoid melanocytic tumors (SMT) are a group of neoplasms that represent a formidable diagnostic challenge for dermatopathologists. DNA methylation (DNAm) is a welldefined epigenetic factor that has an important role in the development of these lesions. In this work, we propose different deep-learning-based approaches to address the Spitzoid neoplasms detection from DNAm. We use an autoencoder and a variational autoencoder for dimensionality reduction with a subsequently supervised classification. Additionally, we present a deep embedded refined clustering algorithm able to optimize the latent space at the same time that the non-supervised classification task is performed. This novel approach in DNAm supposes a step forward in the SMT detection as suggest the obtained results (acc = 0.9). Additionally, making use of the resulting model, we present a subspace-prototypical-based approach for the prognostic prediction of uncertain malignant potential samples, which is nowadays the hottest open area in SMT detection., This work has received funding from Horizon 2020, the European Union¿s Framework Programme for Research and Innovation, under grant agreement No. 860627 (CLARIFY), the Spanish Ministry of Economy and Competitiveness through project PID2019-105142RB-C21 (AI4SKIN) and SICAP (DPI2016-77869-C2-1-R) and GVA through project PROMETEO/2019/109
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Liquid phase laser ablation as a general green physical etching method to prepare MXene dots with arbitrary surface functionalization. Implications in overall water splitting photocatalysis

  • Ramírez-Grau, Rubén
  • Cabrero-Antonino, Maria
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • Rey Cortes, Francís
  • Mínguez-Vega, Gladys
  • Quesne, Matthew G.
  • Catlow, C. Richard A.
  • Mata, Jose A.
[EN] A novel green, fluoride-free etching method allowing installation of surface groups at will for the preparation 0D MXene dots with notable photocatalytic activity is reported. The method consists in the liquid-phase laser ablation using a pulsed Nd-YAG laser (532 nm, 7 ns fwhp, 30 mJ pulse(-1), 10 Hz) that produces the physical Al etching of the Ti3AlC2 precursor forming nanometric Ti3C2 particles. Simultaneously with etching, the surface of the MXene dots become functionalized with organic moieties inherited from the liquid phase as confirmed by XPS and in several cases by FT-IR spectroscopy. The lateral particle size of the Ti3C2 dots depends on the viscosity of the liquid medium and varies from a few nm to above 50 nm. Crystallinity and structure of the Ti3C2 dot is confirmed by high resolution TEM and by selected area electron diffraction of the samples. Ti3C2 dots promote photocatalytic overall water splitting into H-2 and O-2, the activity depending on the nature of the surface terminal groups. However, upon reuse the Ti3C2 dots become significantly degraded into amorphous material, decreasing gradually in photocatalytic activity. This degradation is proposed to be caused by self-oxidation of Ti3C2 dots by the photogenerated holes, as evidenced by the fact that the use of methanol as hole quencher stops deactivation during H-2 production. In sharp contrast with the decay in photocatalytic activity the presence of hole quenchers, the Ti3C2 dots even increase substantially their photocatalytic activity upon reuse, a fact that has been attributed to the optimization of the nature of the surface terminal groups during the photocatalytic process., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 and PDI2021-0126071-OB-CO22 funded by MCIN/AEI/10.13039/501100011033), Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1) and European Commission (ERC Discovery) are gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the local convergence study for an efficient k-step iterative method

  • Amat, Sergio
  • Argyros, Ioannis K.
  • Busquier Saez, Sonia
  • Hernández-Verón, Miguel Angel
  • Martínez Molada, Eulalia|||0000-0003-2869-4334
[EN] This paper is devoted to a family of Newton-like methods with frozen derivatives used to approximate a locally unique solution of an equation. The methods have high order of convergence but only using first order derivatives. Moreover only one LU decomposition is required in each iteration. In particular, the methods are real alternatives to the classical Newton method. We present a local convergence analysis based on hypotheses only on the first derivative. These types of local results were usually proved based on hypotheses on the derivative of order higher than two although only the first derivative appears in these types of methods (Bermficlez et al., 2012; Petkovic et al., 2013; Traub, 1964). We apply these methods to an equation related to the nonlinear complementarity problem. Finally, we find the most efficient method in the family for this problem and we perform a theoretical and a numerical study for it. (C) 2018 Elsevier B.V. All rights reserved., Research was supported in part by Programa de Apoyo a Ia investigacion de Ia fundacion Seneca-Agencia de Ciencia y Tecnologia de la Region de Murcia 19374/PI/14, by the project of Generalitat Valenciana Prometeo/2016/089 and the projects MTM2015-64382-P (MINECO/FEDER), MTM2014-52016-C2-1-P and MTM2014-52016-C2-2-P of the Spanish Ministry of Science and Innovation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Aryl carbinols as nerve agent probes. Influence of the conjugation on the sensing properties

  • Royo Calvo, Santiago
  • Gotor Candel, Raul Jesús
  • Costero Nieto, Ana María
  • Parra Álvarez, Margarita
  • Gil Grau, Salvador
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Sancenón Galarza, Félix|||0000-0002-5205-7135
Two new aryl carbinols (1 and 3) have been synthesised and characterised and their ability as OFF-ON probes for the chromogenic detection of the nerve agent simulant in acetonitrile has been tested. In addition compound 2 has been also studied. The carbinols suffered a phosphorylation reaction followed by an elimination process giving rise to the corresponding carbocations. This transformation of the carbinol into the carbocation is responsible for a significant color change. © The Royal Society of Chemistry and the Centre National de la Recherche Scientifique 2012., Financial support from the Spanish Government (project MAT2009-14564-C04-01) and the Generalitat Valencia (project PROMETEO/2009/016) is gratefully acknowledged. R. G. is grateful to the Spanish Ministry of Education and S. R. to Generalitat Valencia for their grants.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Light-assistance in nitrogen fixation to ammonia by highly dispersed Cs-promoted Ru clusters supported on ZrO2

  • Yong, Peng
  • Shi, Run
  • Antonio Franconetti
  • Melillo, Arianna
  • Forneli Rubio, Mª Amparo
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Light-assisted N-2 fixation to NH3 under mild conditions is attracting massive attention to circumvent energy crisis and global warming. Herein, highly dispersed Cs-decorated Ru sub-nanometric clusters supported on ZrO2 NPs have been prepared by means of MOF-templated transformation method. The obtained catalyst exhibited N-2 hydrogenation activity of 1.6 mmolNH3 g(cat)(-1) h (-1) in the dark (350.C, 0.1 MPa). Remarkably this value increased by over 300 %, reaching 5.1 mmolNH3 g(cat)(-1) h (-1) (204 mmolNH3 g(Ru)(-1) h (-1)) under 1 Sun power illumination (1080 W/ m2) The influence of the incident light wavelength has been evaluated, revealing 81 % and 213 % enhancement in the NIR and visible region, respectively. DFT calculations were carried out to understand the static adsorption states of Ru sub-nanoclusters. Mechanistic studies have confirmed the co-existence of a photothermal and a nonthermal-hot electron mechanism. XPS, PXRD and FTIR analysis have determined that the Cs species block surface Zr4+ acidity, increasing the basicity of the ZrO2 support. Moreover, partially reduced Cs delta+ (0 <delta < 1) species surrounding the Ru active sites are donating electron density to the adjacent Ru sites, favoring N-2 adsorption and subsequent activation. Finally, this photocatalyst has shown an extended stability for 100 h irradiation under continuous flow., Financial support by the Spanish Ministry of Science and Innovation (PDI2021-126071-OB-C21 financed support by MCIN/AEI/10.13039/ 501100011033 and by FEDER "Una manera de hacer Europa"), and Severo Ochoa (CEX2021-1230-S financed support by MCIN/AEI/ 10.13039/501100011033) is gratefully acknowledged. Generalitat Valenciana (Prometeu 2021-038 and MFA-2022-023 financed by European Union-Next Generation EU, through the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital) and European Union Horizon 2020 Research and Innovation Programme (Flow-PhotoChem Grant Agreement 862453) are also gratefully acknowledged. J.A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/ PRTR).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A novel role for protein kinase Gcn2 in yeast tolerance to intracellular acid stress

  • Hueso Lorente, Guillem
  • Aparicio Sanchis, Rafael
  • Montesinos De Lago, Consuelo
  • Lorenz, Silvia
  • Murguía, Jose R.|||0000-0001-9364-4603
  • Serrano Salom, Ramón
Intracellular pH conditions many cellular systems, but its mechanisms of regulation and perception are mostly unknown. We have identified two yeast genes important for tolerance to intracellular acidification caused by weak permeable acids. One corresponded to LEU2 and functions by removing the dependency of the leu2 mutant host strain on uptake of extracellular leucine. Leucine transport is inhibited by intracellular acidification, and either leucine oversupplementation or overexpression of the transporter gene BAP2 improved acid growth. Another acid-tolerance gene is GCN2, encoding a protein kinase activated by uncharged tRNAs during amino acid starvation. Gcn2 phosphorylates eIF2¿ (eukaryotic initiation factor 2¿) (Sui2) at Ser51 and this inhibits general translation, but activates that of Gcn4, a transcription factor for amino acid biosynthetic genes. Intracellular acidification activates Gcn2 probably by inhibition of aminoacyl-tRNA synthetases because we observed accumulation of uncharged tRNAleu without leucine depletion. Gcn2 is required for leucine transport and a gcn2-null mutant is sensitive to acid stress if auxotrophic for leucine. Gcn4 is required for neither leucine transport nor acid tolerance, but a S51A sui2 mutant is acid-sensitive. This suggests that Gcn2, by phosphorylating eIF2¿, may activate translation of an unknown regulator of amino acid transporters different from Gcn4., This work was funded by grants from the Spanish Ministerio de Ciencia e Innovacion (Madrid) [grant number BFU2008-00604] and the Generalitat Valenciana (Valencia) [grant number Prometeo/2010/038].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Highly sensitive homogeneous-heterogeneous nanogold-based microimmunoassays for multi-residue screening of pesticides in drinking water

  • Dobosz, P.
  • Puchades, Rosa|||0000-0002-9329-1593
  • Morais, Sergi|||0000-0002-3722-2358
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] A homogeneous-heterogeneous immunoassay based on the use of antibody modified gold nanoparticles, 5 and 50 nm in diameter, is developed with and without signal amplification. The assays involve the capture of the target analytes in the homogeneous phase and subsequent detection of the immunoreaction product, following a heterogeneous scheme performed on a regular DVD. The analytical approach was evaluated developing multiplexed competitive immunoassays for the determination of residues of the pesticides chlorpyrifos and azoxystrobin as model targets. The results revealed that homogeneous immunocapture strategy improves considerably the assay performance, giving better assay sensitivity when compared to the standard heterogeneous immunoassay format. Under the best conditions, the least detectable level for chlorpyrifos and azoxystrobin were 0.1 ¿g/L. The immunoassays were also highly selective, showing little or no cross-reactivity with other structurally similar compounds. The immunocapture approach was assessed by the analysis of water. The analytical sensitivity was compared with that of reference chromatographic methods, and recovery results agreed. The good recoveries obtained (mean values ranging between 80% and 125%) make this strategy a suitable screening biosensing methodology for either environmental monitoring or laboratory quantification of pesticide residues without sample treatment in a maximum time of 65 min at lower cost., S.M awards grants PID2019-110713RB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by ERDF A way of making Europe. PROMETEO/2020/094, Proyecto 88/2021 Nominativa Accion 2021-12. Dr. A. Abad-Fuentes kindly provided the anti-azoxystrobin antibody and the corresponding coating conjuagte.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

WDM optical access network for full-duplex and reconfigurable capacity assignement based on Polmux technique

  • Mora Almerich, José|||0000-0002-2877-4118
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
  • Capmany Francoy, José|||0000-0002-6460-4167
  • Grassi Marangione, Fulvio
[EN] We present a novel bidirectional WDM-based optical access network featuring reconfigurable capacity assignment. The architecture relies on the PolMUX technique allowing a compact, flexible, and bandwidth-efficient router in addition to source-free ONUs and color-less ONUs for cost/complexity minimization. Moreover, the centralized architecture contemplates remote management and control of polarization. High-quality transmission of digital signals is demonstrated through different routing scenarios where all channels are dynamically assigned in both downlink and uplink directions., This work was supported by the national project TEC2011-26642 funded by the Ministerio de Economía y Competitividad. Also, The authors wish to acknowledge the financial support given by the Generalitat Valenciana under the Research Excellency Award Program GVA PROMETEO 2013/012 Next Generation Microwave Photonic technologies.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

p-divisibility of conjugacy class sizes and normal p-complements

  • Beltrán, Antonio
  • Shao, Changguo
  • Felipe Román, María Josefa|||0000-0002-6699-3135
. Let N be a normal subgroup of a group G and let p be a prime. We prove that if the p-part of jx Gj is a constant for every prime-power order element x 2 N n Z.N /, then N is solvable and has normal p-complement., This research is supported by the Valencian Government, Proyecto PROMETEO/2011/30, and by the Spanish Government, Proyecto MTM2010-19938-C03-02. The third author is supported by the research Project NNSF of China (Grant No. 11201401 and No. 11301218) and University of Jinan Research Funds for Doctors (XBS1335 and XBS1336).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Iterative methods with memory for solving systems of nonlinear equations using a second order approximation

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Maimó, Javier G.
  • Vassileva, María P.
[EN] Iterative methods for solving nonlinear equations are said to have memory when the calculation of the next iterate requires the use of more than one previous iteration. Methods with memory usually have a very stable behavior in the sense of the wideness of the set of convergent initial estimations. With the right choice of parameters, iterative methods without memory can increase their order of convergence significantly, becoming schemes with memory. In this work, starting from a simple method without memory, we increase its order of convergence without adding new functional evaluations by approximating the accelerating parameter with Newton interpolation polynomials of degree one and two. Using this technique in the multidimensional case, we extend the proposed method to systems of nonlinear equations. Numerical tests are presented to verify the theoretical results and a study of the dynamics of the method is applied to different problems to show its stability., This research was supported by PGC2018-095896-B-C22 (MCIU/AEI/FEDER, UE), Generalitat Valenciana PROMETEO/2016/089, and FONDOCYT 2016-2017-212 Republica Dominicana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

DNA -based hydrogels for high-performance optical biosensing application

  • Zezza, Paola
  • Lucío, María Isabel|||0000-0001-7404-352X
  • Maquieira, Angel|||0000-0003-4641-4957
  • Bañuls Polo, María-José|||0000-0002-2422-7731
[EN] Analyte-sensitive DNA-based hydrogels find multiple applications in the field of biosensors due to their adaptable nature. Here, the design of DNA-based hydrogel and its application as sensing platform for the detection of a specific target sequence are presented. DNA-functionalized hydrogel structures were formed via a free radical co-polymerization process. A simple one-step probe immobilization procedure is reported: DNA probe molecules are added to the photoactive polymer mixture, dispensed onto a solid support, or a mold, and covalently attached while the hydrogel is formed through UV light exposure. Such hydrogels can be synthesized with desired recognition ability through the selection of a certain nucleotide sequence. Here we show the application of DNA -based hydrogel to detect the target with high performance in fluorescence microarray format and, additionally, to fabricate holographic surface relief gratings for label-free sensing assays., This work was financially supported by the E.U. FEDER, the Spanish Ministry of Economy and Competitiveness MINECO (ADBIHOLPID2019-110713RB-I00) and Generalitat Valenciana (PROMETEO/2020/094). M. I. Lucio acknowledges MINECO for her Juan de la Cierva Formacion and Incorporacion grants (FJCI-2016-29593, IJC 2018035355-I). Also, P. Zezza acknowledges Generalitat Valenciana for her Grisolia fellowship grant. The authors acknowledge the assistance and advice of the Electron Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Self-optimizing metal-free porous reactors with dynamic active sites unlock record oxygen reduction activity

  • Zhang, Lei
  • Xu, Qiaoling
  • Chen, Mengshan
  • Zhang, Yongcai
  • Zhou, Yingtang
  • Hu, Guangzhi
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Efficient metal-free catalysts are crucial for advancing aluminum-air batteries (AABs), yet their development has been hindered by poor electronic structure optimization and sluggish mass transport. In this study, we developed a hierarchically porous N/S co-doped carbon nanoreactor via an etching-doping pyrolysis strategy, achieving an ultrahigh surface area of 2630 m2 g-1 and a well-organized pore network. The resulting catalyst demonstrated outstanding oxygen reduction reaction (ORR) activity, with half-wave potentials of 0.952 V (vs. RHE; RHE stands for reversible hydrogen electrode) in alkaline and 0.754 V (vs. RHE) in acidic media. When assembled into AABs, it delivered a peak power density of 265 mW cm-2 and an energy density of 4152 Wh kg-1, along with excellent cycling stability. Finite element simulations showed that the hierarchical porosity promoted oxygen diffusion and enhanced reaction kinetics. Furthermore, in situ characterization and theoretical calculations revealed that S-C-N configurations dynamically transformed into Opre-S-C-N groups under working conditions, which modulated the electronic structure of adjacent carbon sites, facilitated *O-to-*OH conversion, and reduced energy barriers. This study provided a dynamic site-regulation strategy for improving ORR kinetics in metal-free catalysts and offered a new pathway for designing high-performance energy materials operating under realistic conditions., This work was financially supported by the Outstanding Youth Scientific Research Project for Colleges and Universities of Anhui Province of China (2022AH020054), the Open Research Fund Program of Anhui Province Key Laboratory of Specialty Polymers (Anhui University of Science & Technology, AHKLSP23-06), and the Xinjiang Key Laboratory of Novel Functional Materials Chemistry Open Science Project (XJLNFMC-202406). Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union Next Generation EU PRTR-C17.I1) is also gratefully acknowledged. The authors would like to thank the Analytical and Testing Center (Anhui University of Science & Technology) for the XRD, XPS, and TEM analysis. The authors thank Mr Fu from SCI-GO (https://www.sci-go.com) for performing the BET analysis. The authors extend their gratitude to Ms Hao (from Scientific Compass https://www.shiyanjia.com) for providing invaluable assistance with the SEM analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Targeted Cargo Delivery in Senescent Cells Using Capped Mesoporous Silica Nanoparticles

  • Agostini, Alessandro
  • Mondragón Martínez, Laura
  • Soto Camino, Juan
  • Costero, Ana
  • Manguan-García, Cristina
  • Perona, Rosario
  • Moreno Torres, Marta
  • Aparicio Sanchis, Rafael
  • Bernardos Bau, Andrea|||0000-0002-3842-5771
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Marcos Martínez, María Dolores|||0000-0001-7079-8589
  • Sancenón Galarza, Félix|||0000-0002-5205-7135
  • Murguía, Jose R.|||0000-0001-9364-4603
We thank the Spanish Government (projects MAT2009-14564-C04 and FIS PI11-0949) the Generalitat Valencia (project PROMETEO/2009/016), and the Universidad Politecnica de Valencia (UPV PAID-05-09) for support. We thank Fundacion Ramon Areces for support. C. M.-G. is supported by CIBERER. L. M. thanks the Generalitat Valenciana for her VALI + D postdoctoral contract.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High performance lattice reduction on heterogeneous computing platform

  • Jozsa, Csaba M
  • Domene Oltra, Fernando
  • Vidal Maciá, Antonio Manuel
  • Piñero, Gema|||0000-0002-8719-8106
  • Gonzalez, Alberto|||0000-0002-6984-3212
The lattice reduction (LR) technique has become very important in many engineering fields. However, its high complexity makes difficult its use in real-time applications, especially in applications that deal with large matrices. As a solution, the modified block LLL (MB-LLL) algorithm was introduced, where several levels of parallelism were exploited: (a) fine-grained parallelism was achieved through the cost-reduced all-swap LLL (CR-AS-LLL) algorithm introduced together with the MB-LLL by Jzsa et al. (Proceedings of the tenth international symposium on wireless communication systems, 2013) and (b) coarse-grained parallelism was achieved by applying the block-reduction concept presented by Wetzel (Algorithmic number theory. Springer, New York, pp 323-337, 1998). In this paper, we present the cost-reduced MB-LLL (CR-MB-LLL) algorithm, which allows to significantly reduce the computational complexity of the MB-LLL by allowing the relaxation of the first LLL condition while executing the LR of submatrices, resulting in the delay of the Gram-Schmidt coefficients update and by using less costly procedures during the boundary checks. The effects of complexity reduction and implementation details are analyzed and discussed for several architectures. A mapping of the CR-MB-LLL on a heterogeneous platform is proposed and it is compared with implementations running on a dynamic parallelism enabled GPU and a multi-core CPU. The mapping on the architecture proposed allows a dynamic scheduling of kernels where the overhead introduced is hidden by the use of several CUDA streams. Results show that the execution time of the CR-MB-LLL algorithm on the heterogeneous platform outperforms the multi-core CPU and it is more efficient than the CR-AS-LLL algorithm in case of large matrices., Financial support for this study was provided by grants TAMOP-4.2.1./B-11/2/KMR-2011-0002, TAMOP-4.2.2/B-10/1-2010-0014 from the Pazmany Peter Catholic University, European Union ERDF, Spanish Government through TEC2012-38142-C04-01 project and Generalitat Valenciana through PROMETEO/2009/013 project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Symbolic Analysis of Maude Theories with Narval

  • Alpuente Frasnedo, María|||0000-0002-9268-1178
  • Escobar Román, Santiago|||0000-0002-3550-4781
  • Sapiña-Sanchis, Julia|||0000-0003-2994-6986
  • Ballis, Demis
[EN] Concurrent functional languages that are endowed with symbolic reasoning capabilities such as Maude offer a high-level, elegant, and efficient approach to programming and analyzing complex, highly nondeterministic software systems. Maude's symbolic capabilities are based on equational unification and narrowing in rewrite theories, and provide Maude with advanced logic programming capabilities such as unification modulo user-definable equational theories and symbolic reachability analysis in rewrite theories. Intricate computing problems may be effectively and naturally solved in Maude thanks to the synergy of these recently developed symbolic capabilities and classical Maude features, such as: (i) rich type structures with sorts (types), subsorts, and overloading; (ii) equational rewriting modulo various combinations of axioms such as associativity, commutativity, and identity; and (iii) classical reachability analysis in rewrite theories. However, the combination of all of these features may hinder the understanding of Maude symbolic computations for non-experienced developers. The purpose of this article is to describe how programming and analysis of Maude rewrite theories can be made easier by providing a sophisticated graphical tool called Narval that supports the fine-grained inspection of Maude symbolic computations., This work has been partially supported by the EU (FEDER) and the Spanish MCIU under grant RTI2018-094403-B-C32, by the Spanish Generalitat Valenciana under grants PROMETEO/2019/098 and APOSTD/2019/127, and by the US Air Force Office of Scientific Research under award number FA9550-17-1-0286.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Kinetic and Compositional Study of Phenolic Extraction from Olive Leaves (var.Serrana) by Using Power Ultrasound

  • Ahmad-Qasem Mateo, Margarita Hussam
  • Canovas, Jaime
  • Barrajon-Catalan, Enrique
  • Micol, Vicente
  • Carcel, J. A.|||0000-0002-3796-6146
  • Garcia-Perez, J.V.|||0000-0002-9993-4246
[EN] Power ultrasound is being used as a novel technique for process intensification. In this study, the feasibility of using power ultrasound to improve the phenolic extraction from olive leaves was approached taking both compositional and kinetic issues into account and also determining the influence of the main process parameters (the electric power supplied, emitter surface and temperature). For this purpose, the extraction kinetics were monitored by measuring the total phenolic content and antioxidant capacity and mathematically described by Naik's model, and HPLC DAD/MS MS was used to identify and quantify the main polyphenols. The electric power supplied and the emitter surface greatly affected the effective ultrasonic power applied to the medium, and hence the extraction rate. However, the influence of temperature on ultrasound assisted extraction was not clear. Compared with conventional extraction, ultrasound assisted extraction reduced the extraction time from 24 h to 15 min and did not modify the extract composition. Industrial relevance: Olive crop produces a significant quantity of byproducts (leaves, branches, solid and liquid wastes), coming from the tree pruning, fruit harvest and oil production, which are rich in phenolic compounds with bioactive properties. The extraction of the bioactive compounds could be an interesting option with which to increase the value of these byproducts, as it requires efficient extraction techniques in order to reduce processing costs and improve productivity. In this sense, ultrasound assisted extraction is considered a novel technique used as ameans of intensifying a slow process, such as the leaching of polyphenols fromvegetablematrices. In order to further address the industrial applications of ultrasound assisted extraction, a kinetic study should be carried out determining both the effective energy introduced into the medium, as well as its influence on the extract quality., The authors thank the Generalitat Valenciana (PROMETEO/2010/062 and PROMETEO/2012/007) for its financial support. M. H. Ahmad Qasem was the recipient of a fellowship from Ministerio de Educacion, Cultura y Deporte of Spain (Programa de Formacion de Profesorado Universitario del Programa Nacional de Formacion de Recursos Humanos de Investigacion).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dyes decolorization using silver nanoparticles supported on nanometric diamond as highly efficient photocatalyst under natural Sunlight irradiation

  • Manickam-Periyaraman, Premkumar
  • Espinosa, Sergio Manuel
  • Espinosa-López, Juan Carlos
  • Subramanian, Sivanesan
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Herein we report that silver nanoparticles supported on commercial diamond nanoparticles functionalized with hydroxyl groups (D3) is a cost-effective heterogeneous catalyst for the decolorization of different synthetic dyes (Methylene Blue, Orange II, Acid Red 1 or Rhodamine B) using H2O2 as oxidant under natural Sunlight irradiation. Importantly, the photocatalytic activity of Ag/D3 is higher than that of analogous catalysts based on Ag NPs supported on graphite or activated carbon and similar to that of costly Au/D3 catalyst or the benchmark Ag/TiO2 material. Ag/D3 stability was established by performing consecutive reuses, without observing either decrease of the catalytic activity or metal leaching, while particle size increase occurs in a low extent. Productivity tests allow determining a minimum TON for dyes and H2O2 of about 500 and 6000, respectively. © 2016 Elsevier B.V. All rights reserved. All rights reserved., Financial support by the Spanish Ministry of Economy and Competitiveness (Severo Ochoa, CTQ2012-32315 and CTQ2014-53292-R) is gratefully acknowledged. Generalidad Valenciana is also thanked for funding (Prometeo 2012/013). European Commission has been gratefully acknowledged for granting Erasmus Mundus Action-2 (SVAAGATA) fellowship to the first author for carrying out this work in Department of Chemistry, Universitat Politecnica de Valencia, Valencia, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ovarian transcriptomic analysis reveals differential expression genes associated with cell death process after selection for ovulation rate in rabbits

  • Serna-García, Marta
  • Serna, Eva
  • Peiró Barber, Rosa Mª|||0000-0002-3009-2343
  • Santacreu, María-Antonia|||0000-0002-6847-9551
[EN] Transcriptomic analysis showed nineteen potential biomarkers in ovarian tissue from females belonged to a rabbit line selected for ovulation rate for 10 generations and the control line. These females differed not only in ovulation rate but also in prenatal survival since similar litter size were observed. Litter size is an essential trait in rabbit meat production but with low heritability. A selection experiment for ovulation rate has been performed for 10 generations to improve litter size in rabbits. The selected line increased two ova more than the control line but nevertheless a negative correlation was observed with prenatal survival. A transcriptomic study was performed, using microarrays, in ovarian tissue from females belonging to the selected line and the control line. Our results showed 1357 differential expressed genes and nineteen potential biomarkers associated with prenatal mortality, which could explain differences between litter size in rabbits. Cell death was the most relevant process., This research was supported by MEC (AGL2014-55921-C2-1-P) and Generalitat Valenciana (Prometeo 2009/125).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Barium ion sensing with IPG K+ molecular probes

  • Miller, R. L.
  • Byrnes, N.
  • Cameron, C. G.
  • Carlson, A. J.
  • Dey, E.
  • Madigan, R.
  • Medina, J.
  • Melancon, S.
  • Navarro, K. E.
  • Foss, F. W.
  • Jones, B. J. P.
  • Adams, C.
  • Almazan, H.
  • Aranburu, A. I.
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • García-Barrena, Jara
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
[EN] Fluorophores covalently bound to azacrown ether ionophores can be assembled into sensitive turn-on chemosensors. The size specificity and electron-rich nature of the ionophore's binding domain contribute to both selectivity and strong turn-on fluorescence sensing by various mechanisms when properly constructed. Aza-18-crown-6 ethers are quite selective for binding to K+ and Ba2+, yet the more electron-withdrawing dicationic nature of barium imposes a larger electronic effect on turn-on fluorescent sensors. Barium chemosensors can be important for measuring soluble Ba2+ in drinking water and have gained recent attention for their potential to enhance the detection of rare events in xenon decay. Here we quantify the capability of three chemosensors, marketed for biologically useful K+ sensing, as effective probes for Ba2+ ions. We present measurements from bulk spectrofluorometry to characterize the system in aqueous solutions and demonstrate the usefulness of these species for low-background single-ion fluorescence microscopy, revealing new candidates for Ba2+ sensing., Our program of single metal ion sensing is a part of a collaborative project to employ SMFI chemosensors functional at the solid-gas interface as R&D toward barium tagging for the NEXT experiment. We thank ION Biosciences for supplying the IPG dyes used in these experiments and also for technical support on their best use. We acknowledge support from the US National Science Foundation under award number NSF CHE 2004111 and the Robert A Welch Foundation under award number Y-2031-20200401 (University of Texas Arlington) and the US Department of Energy under awards DE-SC0019054 and DE-SC0019223. The NEXT Collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under Grant Agreement No. 951281-BOLD; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under Grant Agreement No. 957202-HIDDEN; the MCIN/AEI of Spain and ERDF A way of making Europe under grants RTI2018-095979 and PID2021-125475NB, the Severo Ochoa Program grant CEX2018-000867-S and the Ramon y Cajal program grant RYC-2015-18820; the Generalitat Valenciana of Spain under grants PROMETEO/2021/087 and CIDEGENT/2019/049; the Department of Education of the Basque Government of Spain under the predoctoral training program non-doctoral research personnel; the Portuguese FCT under project UID/FIS/04559/2020 to fund the activities of LIBPhys-UC; the Pazy Foundation (Israel) under grants 877040 and 877041; the US Department of Energy under contracts number DE-AC02-06CH11357 (Argonne National Laboratory) and DE-AC02-07CH11359 (Fermi National Accelerator Laboratory). Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Interrogation of a Sensor Array of Identical Weak FBGs using Dispersive Incoherent OFDR

  • Clement, Juan
  • Torregrosa, German
  • Hervás-Peralta, Javier
  • Fernandez-Pousa, Carlos R.
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] Incoherent Optical Fourier-Domain Reflectometry incorporating a dispersive delay line is used for the interrogation of an array of three identical fiber Bragg gratings with a Bragg wavelength of 1552.81 nm, reflectivity of 19.3 dB and 10-cm separation. The dispersive delay line induces different delays in the wavelengths reflected by each grating, thus being sensitive to Bragg wavelength shifts. Compared with conventional incoherent Optical Fourier-Domain Reflectometry, dispersive effects decrease the spatial resolution, which in our experiments reached a value of 1.2 cm in fiber at a measurement bandwidth of 10 GHz. As a quasi-distributed temperature sensor, the array shows an accuracy of ±0.5ºC for temperatures up to 100ºC, and an estimated total measurement range of 540ºC. Tradeoffs between bandwidth, scan time, dispersion-dependent spatial resolution, and accuracy, are also analyzed., This work was supported in part by the Generalitat Valenciana, Valencia, within the Research Excellency Award through the GVA PROMETEO Program under Grant 2013/012 and in part by the Ministerio de Economia y Competitividad under Project TEC201-60378-C2-1-R. The work of J. Hervas was supported by the Ministerio de Educacion, Cultura y Deporte through the Formacion Profesorado Scholarship (FPU13/04675).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Oligonucleotide-capped nanoporous anodic alumina biosensor as diagnostic tool for rapid and accurate detection of Candida auris in clinical samples

  • Pla, Luis
  • Santiago-Felipe, Sara
  • Tormo-Mas, María Ángeles
  • Ruiz-Gaitán, Alba
  • Peman, Javier
  • Valentín, Eulogio
  • Sancenón Galarza, Félix|||0000-0002-5205-7135
  • Aznar, Elena|||0000-0003-0361-3876
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
[EN] Candida auris has arisen as an important multidrug-resistant fungus because of several nosocomial outbreaks and elevated rates of mortality. Accurate and rapid diagnosis of C. auris is highly desired; nevertheless, current methods often present severe limitations and produce misidentification. Herein a sensitive, selective, and time-competitive biosensor based on oligonucleotide-gated nanomaterials for effective detection of C. auris is presented. In the proposed design, a nanoporous anodic alumina scaffold is filled with the fluorescent indicator rhodamine B and the pores blocked with different oligonucleotides capable of specifically recognize C. auris genomic DNA. Gate opening modulation and cargo delivery is controlled by successful DNA recognition. C. auris is detected at a concentration as low as 6 CFU/mL allowing obtaining a diagnostic result in clinical samples in one hour with no prior DNA extraction or amplification steps., The authors want to thank the Spanish Government (project RTI2018-100910-B-C41 (MCIU/AEI/FEDER, UE)), the Generalitat Valenciana (project PROMETEO/2018/024), Universitat Politecnica de Valencia-Instituto de Investigacion Sanitaria La Fe (AURISGATE project) and Centro de Investigacion Biomedica en Red en Bioingenieria, Biomateriales y Nanomedicina (NANOPATH AND CANDI-EYE projects) for support. L.P thanks MINECO for his predoctoral fellowship. S.S. thanks the Instituto de Salud Carlos III and the European Social Fund for the financial support "Sara Borrell" (CD16/000237).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of relative humidity and low temperature hydrothermal degradation on fretting wear of Y-TZP dental ceramics

  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Gil, Lorena
  • Presenda, Alvaro
  • Vleugels, Jozef
  • Moreno, Rodrigo
[EN] Dental pieces are subjected to constant friction due to grinding during mastication and mouth disorders such as bruxism. Therefore, wear resistance of Y-TZP materials used for dental prostheses must be investigated. In this work, the influence of humidity and low temperature hydrothermal degradation (LTD) in 3Y-TZP ceramics subjected to fretting has been evaluated. A 100% r.h. reduces the effects of wear due to the lubricative effect of water, compared to those at ambient r.h. COF, wear volume and damage are considerably lowered at a r.h. of 100%. Exposure to degradation conditions for 25 h increased the vulnerability to wear damage of LAVA grade Y-TZP sintered at 1400 degrees C since the critical grain size of 300 nm was exceeded., This work has been supported by the Spanish Ministry of Economy and Competitiveness MINECO by MAT2015-67586-C3-R project and RyC contract (RYC-2016-20915), and the Generalitat Valenciana by PROMETEO/2016/040 project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Switchable Spin-Crossover Hofmann-Type 3D Coordination Polymers Based on Tri- and Tetratopic Ligands

  • Valverde-Muñoz, F. J.
  • Ferrer, S.
  • Bartual-Murgui, C.
  • Real, J. A.
  • Muñoz Roca, María Del Carmen|||0000-0003-2630-3897
[EN] Fe-II spin-crossover (SCO) coordination polymers of the Hofmann type have become an archetypal class of responsive materials. Almost invariably, the construction of their architectures has been based on the use of monotopic and linear ditopic pyridine like ligands. In the search for new Hofmann-type architectures with SCO properties, here we analyze the possibilities of bridging ligands with higher connectivity degree. More precisely, the synthesis and structure of {Fe-II(L-N3)[M-I(CN)(2)](2)}center dot(Guest) (Guest = nitro-benzene, benzonitrile, o-dichlorobenzene; M-I = Ag, Au) and {Fe-II(L-N4)[Ag-2(CN)(3)][Ag(CN)(2)]}center dot H2O are described, where L-N3 and L-N4 are the tritopic and tetratopic ligands 1,3,5-tris(pyridin-4-ylethynyl)benzene and 1,2,4,5-tetrakis(pyridin-4-ylethynyl)benzene. This new series of Hofmann clathrates displays thermo- and photoinduced SCO behaviors., We thank the Spanish Ministerio de Economia y Competitividad (MINECO) and FEDER funds (CTQ2013-46275-P and CTQ2016-78341-P and Unidad de Excelencia Maria de Maeztu MDM-2015-0538), and Generalitat Valenciana (PROMETEO/2016/147). FJ.V.-M. thanks MINECO for a predoctoral FPI grant. We also thank Dr. Carlos Marti for helping us with ToposPro software.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Convergent optical fronthaul link for wireless access over different spectral bands

  • Botella-Campos, Marta|||0000-0002-1317-286X
  • Romero-Huedo, Jaime
  • Mora Almerich, José|||0000-0002-2877-4118
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] We demonstrate a convergent optical fronthaul link for enabling heterogeneous wireless access technologies in 6G future networks deployment based on a directly modulated laser and an external Mach¿Zehnder modulator biased at null point for optical frequency multiplying. Simultaneous transmission of two M-QAM data signals over baseband and millimeter wave (mmW) frequency band, i.e. 42 GHz, is demonstrated over a 10 km fiber link, showing the suitability for visible light communications and mmW radio access, respectively, to the final user. System intermodulation in mmW band is identified under high received optical power levels and overcome by inserting a dispersion compensation module., The research has been supported by the national project MCIN/AEI/ and ERDF A way of making Europe (PID2021-126514OB-I00 OPTIMISE), and the regional project PROMETEO/2021/015 Disruptive Photonics Technologies for 2030 funded by Generalitat Valenciana, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Strategical and tactical supply chain optimisation for smart production planning and control 4.0

  • Cañas-Sánchez, Hector Enrique
  • Campuzano-Bolarín, Francisco
  • Mula, Josefa|||0000-0002-8447-3387
[EN] Industry 4.0 (I4.0) technologies generate new opportunities for developing smart models, algorithms and tools to support supply chain (SC) production planning and control (PPC), or smart PPC (SPPC 4.0). Paired with opportunities, challenges arise in integrating sustainability and resilience in SC network design (SCND) according under I4.0. The main novelty of this paper is to propose two multi-objective models that integrate strategical and tactical PPC decisions into a sustainable-resilient SC under I4.0 towards SPPC 4.0. Sustainability is incorporated in terms of reducing costs and CO2 emissions, and a job creation factor. Resilience is incorporated in terms of contracting support suppliers. To solve the multi-objective models, the augmented epsilon constraint method (AUGMECON) was used. This algorithm minimises a target objective function while it treats the others as constraints. Our experiments indicate that AUGMECON is sensitive to the choice of epsilon values. Furthermore, a synthetic data generation tool called SR1-SR2_SynthDataGenerator was developed. This tool generates input datasets to validate and evaluate our models against benchmarks. A stochastic model (SR2) is also proposed that, with small datasets, takes 8.39 seconds to solve. The proposed models can be useful for industries that seek sustainable and resilient SCs to adapt to changing environments., The research that has led to the present results has received funding from: the MCIN/AEI/10.13039/501100011033 and by European Union Next GenerationEU/PRTR with grant agreement PDC2022-133957-I00); and the Regional Department of Innovation, Universities, Science and Digital Society of the Generalitat Valenciana entitled 'Industrial Production and Logistics Optimization in Industry 4.0' (i4OPT) (Ref. PROMETEO/2021/065); and from the European Union Horizon Europe program under grant agreements No. 101070076 'Optimizing Production and Logistic Resources in the Time-critical Bio Production Industries in Europe' (CLARUS) and No. 101057294 'AI Driven Industrial Equipment Product Life Cycle Boosting Agility, Sustainability and Resilience' (AIDEAS).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Lithium salt additives and the influence of their counterion on the performances of light-emitting electrochemical cells

  • Bandiello, Enrico|||0000-0003-0956-3195
  • Sessolo, M.
  • Bolink, H. J.
[EN] In this work we study the effect of the addition of lithium salts to light-emitting electrochemical cells (LECs), and in particular the effect of the lithium counterion. We found that the chosen lithium salts can substantially improve the device turn-on time as well as the overall lifetime, with respect to reference LECs using the pure emitter. A correlation between the lithium counterion and the corresponding device performance is established, and efficient LECs with lifetimes approaching 2000 hours are presented., We acknowledge financial support from the European Union H2020 project INFORM (grant 675867), the Spanish Ministry of Economy and Competitiveness (MINECO) via the Unidad de Excelencia Maria de Maeztu MDM-2015-0538, MAT2014-55200 and PCIN-2015-255 and the Generalitat Valenciana (Prometeo/2012/053). M. S. and E. B. thank the MINECO for their post-doctoral (JdC) and pre-doctoral grants, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient recovery-based error estimation for the smoothed finite element method for smooth and singular linear elasticity

  • González Estrada, Octavio Andrés
  • Natarajan, S.
  • J.J. Ródenas
  • Nguyen-Xuan, H.
  • Bordas, S.P.A.
[EN] An error control technique aimed to assess the quality of smoothed finite element approximations is presented in this paper. Finite element techniques based on strain smoothing appeared in 2007 were shown to provide significant advantages compared to conventional finite element approximations. In particular, a widely cited strength of such methods is improved accuracy for the same computational cost. Yet, few attempts have been made to directly assess the quality of the results obtained during the simulation by evaluating an estimate of the discretization error. Here we propose a recovery type error estimator based on an enhanced recovery technique. The salient features of the recovery are: enforcement of local equilibrium and, for singular problems a ¿smooth + singular¿ decomposition of the recovered stress. We evaluate the proposed estimator on a number of test cases from linear elastic structural mechanics and obtain efficient error estimations whose effectivities, both at local and global levels, are improved compared to recovery procedures not implementing these features., Stephane Bordas would like to thank the partial financial support of the Royal Academy of Engineering and of the Leverhulme Trust for his Senior Research Fellowship Towards the next generation surgical simulators as well as the financial support for Octavio A. Gonzalez-Estrada and Stephane Bordas from the UK Engineering Physical Science Research Council (EPSRC) under grant EP/G042705/1 Increased Reliability for Industrially Relevant Automatic Crack Growth Simulation with the eXtended Finite Element Method. Stephane Bordas also thanks partial financial support of the European Research Council Starting Independent Research Grant (ERC Stg grant agreement No. 279578) and the FP7 Initial Training Network Funding under grant number 289361 "Integrating Numerical Simulation and Geometric Design Technology, INSIST". This work has been carried out within the framework of the research project DPI2010-20542 of the Ministerio de Ciencia e Innovacion (Spain). The financial support from Universitat Politecnica de Valencia, PROMETEO/2012/023 and Generalitat Valenciana are also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A convex combination approach for mean-based variants of Newton&apos, s method

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Franceschi, Jonathan
  • Zagati, Anna C.
[EN] Several authors have designed variants of Newton¿s method for solving nonlinear equations by using different means. This technique involves a symmetry in the corresponding fixed-point operator. In this paper, some known results about mean-based variants of Newton¿s method (MBN) are re-analyzed from the point of view of convex combinations. A new test is developed to study the order of convergence of general MBN. Furthermore, a generalization of the Lehmer mean is proposed and discussed. Numerical tests are provided to support the theoretical results obtained and to compare the different methods employed. Some dynamical planes of the analyzed methods on several equations are presented, revealing the great difference between the MBN when it comes to determining the set of starting points that ensure convergence and observing their symmetry in the complex plane., This research was partially funded by Spanish Ministerio de Ciencia, Innovacion y Universidades PGC2018-095896-B-C22 and by Generalitat Valenciana PROMETEO/2016/089 (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Molecular characterization of a new trichovirus from peach in Mexico

  • De la Torre-Almaráz, Rodolfo
  • Pallás Benet, Vicente|||0000-0003-4954-989X
  • Sánchez-Navarro, Jesús-Ángel|||0000-0002-3320-2827
[EN] The complete genome sequence of a trichovirus was obtained from peach samples collected from Mexico and found to be 7985 nucleotides long, excluding the poly(A) tail. Phylogenetic analysis using the complete nucleotide sequence revealed that the virus is a member of the genus Trichovirus and is closely related to peach mosaic virus (PcMV) and cherry mottle leaf virus (CMLV). The highest nucleotide sequence identity was 70% to both PcMV and CMLV, indicating that this virus, which we have tentatively named "peach virus M" (PeVM) should be considered a member of a new trichovirus species. We determined, for the first time, the initiation sites of the subgenomic RNAs (sgRNA) of a trichovirus. The sgRNAs for the movement and coat proteins started with the sequence 'GAA', while the smallest one, coding for the nucleotide-binding protein, started with the nucleotides 'GU'. In all cases, the sgRNAs leader ranged between 113 and 121 nt in length., This work was supported by Grant BIO2017-88321-R from the Spanish Direccion General de Investigacion Cientifica y Tecnica (DGICYT) and the Prometeo Program GV2015/010 from the Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Comparación de los umbrales de fractura biomecánica de los tejidos de la cabeza humana mediante un modelo de elementos finitos

  • Lozano-Mínguez, Estívaliz|||0000-0003-4576-826X
  • Rupérez Moreno, María José|||0000-0001-8457-7963
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
  • Palomar-Toledano, Marta
[ES] Anualmente se producen un gran número de muertes y discapacidades permanentes a consecuencia de traumatismos craneoencefálicos. Al no poderse realizar ensayos in vivo para conocer los mecanismos de desarrollo de estas lesiones, las simulaciones numéricas son una herramienta clave en el estudio de éstas. La precisión de los modelos numéricos depende en gran medida de la correcta definición de las ecuaciones constitutivas y de los modelos de daño. Sin embargo, en la literatura se encuentra gran dispersión en los modelos empleados, así como en los valores de las propiedades biomecánicas. Por tanto, el objetivo principal de esta investigación era realizar una revisión y comparación de los modelos y las propiedades empleadas en la literatura, mediante un nuevo modelo de elementos finitos (EF) calibrado con ensayos experimentales de cadáveres, para discernir aquellos que proporcionan una respuesta más cercana a los resultados empíricos. Los valores umbral del cráneo y del cuero cabelludo que conducen a la fractura han sido estudiados y seleccionados. Se ha observado que el hueso compacto es crítico en la fractura del cráneo pero que no es el único parámetro que influye en ésta., Los autores agradecen el apoyo financiero recibido del Ministerio de Economía y Competitividad y los Fondos FEDER a través del proyecto RTC-2015-3887-8. También se reconoce el apoyo de la Generalitat Valenciana a través del programa PROMETEO 2016/007
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

MOF-Triggered Synthesis of Subnanometer Ag02 Clusters and Fe3+ Single Atoms: Heterogenization Led to Efficient and Synergetic One- Pot Catalytic Reactions

  • Tiburcio, Estefanía
  • Zheng, Yongkun
  • Bilanin-Artigado, Cristina
  • Hernández-Garrido, Juan Carlos
  • Martín-García, Nuria
  • Ferrando-Soria, Jesus
  • Armentano, Donatella
  • Pardo, Emilio
  • Vidal Moya, José Alejandro
  • Oliver-Meseguer, Judit|||0000-0003-1555-3583
  • Mon-Conejero, Marta|||0000-0002-1983-1096
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] The combination of well-defined Fe3+ isolated single-metal atoms and Ag2 subnanometer metal clusters within the channels of a metal¿organic framework (MOF) is reported and characterized by single-crystal X-ray diffraction for the first time. The resulting hybrid material, with the formula [Ag02(Ag0)1.34FeIII0.66]@NaI2{NiII4[CuII2(Me3mpba)2]3}·63H2O (Fe3+Ag02@MOF), is capable of catalyzing the unprecedented direct conversion of styrene to phenylacetylene in one pot. In particular, Fe3+Ag02@MOF¿which can easily be obtained in a gram scale¿exhibits superior catalytic activity for the TEMPO-free oxidative cross-coupling of styrenes with phenyl sulfone to give vinyl sulfones in yields up to >99%, which are ultimately transformed, in situ, to the corresponding phenylacetylene product. The results presented here constitute a paradigmatic example of how the synthesis of different metal species in well-defined solid catalysts, combined with speciation of the true metal catalyst of an organic reaction in solution, allows the design of a new challenging reaction., This work was supported by the MICINN (Spain) (Projects PID2019-104778GB-I00, PID2020-115100GB-I00, and Ex-cellence Unit "Maria de Maeztu" CEX2019-000919-M) . This work was been funded by Generalitat Valenciana, Prometeo Grupos de Investigacion de Excelencia (PROMETEU/2021/054) and GV/emergentes (GV/2021/138) . D. A . also acknowl-edges the financial support of the European Union-NextGenerationEU under the National Recovery and Resil-ience Pla n (NRRP) of Ministero dell'Universita ` e della Ricerca (MUR) (Project code PE0000021, "Network 4 Energy Sustainable Transition-NEST) . Thanks are also extended to the 2019 Post-doctoral Junior Leader-Retaining Fellowship, la Caixa Foundation (ID100010434 and fellowship code LCF/BQ/PR19/11700011) , the "Generalitat Valenciana" (SEJI/2020/034) , and the "Ramon y Cajal" program (RYC2019-027940-I) (J.F.-S.) . E.P. acknowledges the financial support from the European Research Council under the European Union's Horizon 2020 research and innovation programme/ERC Grant Agreement No 814804, MOF-reactors. M.M., N.M., and J.O.-M. acknowledge MICIIN from a contract under the Juan de la Cierva program (FJC2019-040523-I, FJC2018-035455-I, and IJC2018-036514-I, respectively) . E.T. thanks the MICINN for a PhD FPI grant. Y.Z. tha n k s the China Scholarship Council (CSC No: 202009350009) for a Ph.D. fellowship. C.B. thanks ITQ for a contract. We acknowledge ALBA Synchrotron for allocating beamtime and CLAESS beamline staff, especially Dr. Carlo Marini , for their technical support during our experiment. This study forms part of the Advanced Materials programme (MFA/2022/048) and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of Erythemal UVB Dose Received Inside a Car in Valencia, Spain

  • Gonzalo Gurrea-Ysasi|||0000-0001-5658-1201
  • Blanca-Giménez, Vicente|||0000-0003-3738-6085
  • Moreno, J.C.|||0000-0002-7696-9745
  • Serrano, María-Antonia|||0000-0002-1508-6893
[EN] Continuous exposures to ultraviolet radiation can lead to harmful effects on human skin. Professional drivers may spend more than 8 h per day inside a vehicle. This study describes an analysis of the UVER (erythemal ultraviolet radiation) received by a driver and passenger inside a vehicle. A three-door Peugeot 206 was used for the study. VioSpor Blue Line dosimeters (with a response profile close to that of human skin) were used to measure the erythematic dose of UV radiation (able to produce erythema on human skin). Four dosimeters were placed in the driver¿s position and another four in the passenger¿s position. Daily irradiance was analyzed for a day in April using PMA radiometers. The measurements were obtained on relatively clear days from February to December 2009 between 9:30 A.M. and 3 P.M. Additionally, a prediction was made of the time required to produce an erythema on the driver¿s skin. UVER exposure, in some of the driver¿s positions, exceeds the Exposure Limits given by the International Commission on Non-Ionizing Radiation Protection (ICNIRP). Skin protection measures should be taken into account by professional drivers to prevent the harmful effects of UVER radiation., This work was carried out with financing from the Ministry of Economy and Competitiveness, Project CGL2010-15931/CLI, from the Generalitat Valenciana within the PROMETEO/2010/064 Project, and the Spanish Ministry of Science and Innovation, in the CGL200761813 Project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Using a Hybrid Recommending System for Learning Videos in Flipped Classrooms and MOOCs

  • Jordán, Jaume|||0000-0003-0400-9136
  • Valero Cubas, Soledad|||0000-0003-4565-326X
  • Turró Ribalta, Carlos|||0000-0002-3840-9405
  • Botti V.|||0000-0002-6507-2756
[EN] New challenges in education require new ways of education. Higher education has adapted to these new challenges by means of offering new types of training like massive online open courses and by updating their teaching methodology using novel approaches as flipped classrooms. These types of training have enabled universities to better adapt to the challenges posed by the pandemic. In addition, high quality learning objects are necessary for these new forms of education to be successful, with learning videos being the most common learning objects to provide theoretical concepts. This paper describes a new approach of a previously presented hybrid learning recommender system based on content-based techniques, which was capable of recommend useful videos to learners and lecturers from a learning video repository. In this new approach, the content-based techniques are also combined with a collaborative filtering module, which increases the probability of recommending relevant videos. This hybrid technique has been successfully applied to a real scenario in the central video repository of the Universitat Politècnica de València., This research was partially supported by MINECO/FEDER RTI2018-095390-B-C31 and TIN2017-89156-R projects of the Spanish government, and PROMETEO/2018/002 project of Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Solving the time capacitated arc routing problem under fuzzy and stochastic travel and service times

  • Martín, Xabier A.
  • Panadero, Javier
  • Peidro Payá, David|||0000-0001-8678-6881
  • Pérez Bernabeu, Elena|||0000-0002-9221-7623
  • Juan, Angel A.|||0000-0003-1392-1776
[EN] Stochastic, as well as fuzzy uncertainty, can be found in most real-world systems. Considering both types of uncertainties simultaneously makes optimization problems incredibly challenging. In this paper we propose a fuzzy simheuristic to solve the Time Capacitated Arc Routing Problem (TCARP) when the nature of the travel time can either be deterministic, stochastic or fuzzy. The main goal is to find a solution (vehicle routes) that minimizes the total time spent in servicing the required arcs. However, due to uncertainty, other characteristics of the solution are also considered. In particular, we illustrate how reliability concepts can enrich the probabilistic information given to decision-makers. In order to solve the aforementioned optimization problem, we extend the concept of simheuristic framework so it can also include fuzzy elements. Hence, both stochastic and fuzzy uncertainty are simultaneously incorporated into the CARP. In order to test our approach, classical CARP instances have been adapted and extended so that customers' demands become either stochastic or fuzzy. The experimental results show the effectiveness of the proposed approach when compared with more traditional ones. In particular, our fuzzy simheuristic is capable of generating new best-known solutions for the stochastic versions of some instances belonging to the tegl, tcarp, val, and rural benchmarks., Spanish Ministry of Science, Grant/Award Number: PID2019-111100RB-C21/AEI/10.13039/501100011033; Barcelona Council and the "la Caixa" Foundation under the framework of the Barcelona Science Plan 2020-2023, Grant/Award Number: 21S09355-001; Generalitat Valenciana,Grant/Award Number: PROMETEO/2021/065
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Self-similar focusing with generalized devil&apos, s lenses

  • Casanova, Cristina
  • Furlan, Walter D.
  • Remón Martín, Laura
  • Calatayud Calatayud, Arnau
  • Mendoza-Yero, Omel
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] We introduce the generalized devil's lenses (GDLs) as a new family of diffractive kinoform lenses whose structure is based on the generalized Cantor set. The focusing properties of different members of this family are analyzed. It is shown that under plane wave illumination the GDLs give a single main focus surrounded by many subsidiary foci. It is shown that the total number of subsidiary foci is higher than the number of foci corresponding to conventional devil's lenses; however, the self-similar behavior of the axial irradiance is preserved to some extent. (C) 2011 Optical Society of America, We acknowledge the financial support from the Ministerio de Ciencia e Innovacion, Spain, grants DPI2008-02953, TRA2009-0215, and FIS2010-15746. We also acknowledge the support from Generalitat Valenciana (PROMETEO2009-077 and ACOMP/2010/052), and from Universidad Politecnica de Valencia, Spain (PAID-05-09 and PAID-06-08). L. Remon acknowledges a fellowship of "Fundacion Cajamurcia," Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Passive-aggressive for on-line learning in statistical machine translation

  • Martínez Gómez, Pascual
  • Sanchis Trilles, Germán
  • Casacuberta Nolla, Francisco|||0000-0002-8497-5598
New variations on the application of the passive-aggressive algorithm to statistical machine translation are developed and compared to previously existing approaches. In online adaptation, the system needs to adapt to real-world changing scenarios, where training and tuning only take place when the system is set-up for the first time. Post-edit information, as described by a given quality measure, is used as valuable feedback within the passive-aggressive framework, adapting the statistical models on-line. First, by modifying the translation model parameters, and alternatively, by adapting the scaling factors present in stateof- the-art SMT systems. Experimental results show improvements in translation quality by allowing the system to learn on a sentence-by-sentence basis., This paper is based upon work supported by the EC (FEDER/FSE) and the Spanish MICINN under projects MIPRCV “Consolider Ingenio 2010” (CSD2007-00018) and iTrans2 (TIN2009-14511). Also supported by the Spanish MITyC under the erudito.com (TSI-020110-2009-439) project, by the Generalitat Valenciana under grant Prometeo/2009/014 and scholarship GV/2010/067 and by the UPV under grant 20091027.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Event Detection System in the NEXT-White Detector

  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Simón Estévez, Ander
  • Monrabal Capilla, Francesc
  • Rodriguez-Samaniego, Javier
  • Querol-Segura, Marc
[EN] This article describes the event detection system of the NEXT-White detector, a 5 kg high pressure xenon TPC with electroluminescent amplification, located in the Laboratorio Subterráneo de Canfranc (LSC), Spain. The detector is based on a plane of photomultipliers (PMTs) for energy measurements and a silicon photomultiplier (SiPM) tracking plane for offline topological event filtering. The event detection system, based on the SRS-ATCA data acquisition system developed in the framework of the CERN RD51 collaboration, has been designed to detect multiple events based on online PMT signal energy measurements and a coincidence-detection algorithm. Implemented on FPGA, the system has been successfully running and evolving during NEXT-White operation. The event detection system brings some relevant and new functionalities in the field. A distributed double event processor has been implemented to detect simultaneously two different types of events thus allowing simultaneous calibration and physics runs. This special feature provides constant monitoring of the detector conditions, being especially relevant to the lifetime and geometrical map computations which are needed to correct high-energy physics events. Other features, like primary scintillation event rejection, or a double buffer associated with the type of event being searched, help reduce the unnecessary data throughput thus minimizing dead time and improving trigger efficiency., The NEXT collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under the Advanced Grant 339787-NEXT, the Ministerio de Economia y Competitividad and the Ministerio de Ciencia, Innovacion y Universidades of Spain under grants FIS2014-53371-C04, RTI2018-095979, the Severo Ochoa Program SEV-2014-0398 and the Maria de Maetzu Program MDM-2016-0692; the GVA of Spain under grants PROMETEO/2016/120 and SEJI/2017/011; the Portuguese FCT under project PTDC/FISNUC/2525/2014, under project UID/FIS/04559/2013 to fund the activities of LIBPhys, and under grants PD/BD/105921/2014, SFRH/BPD/109180/2015 and SFRH/BPD/76842/2011; the U.S. Department of Energy under contracts number DE-AC02-06CH11357 (Argonne National Laboratory), DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M) and DE-SC0019223/DE-SC0019054 (University of Texas at Arlington); and the University of Texas at Arlington. DGD acknowledges Ramon y Cajal program (Spain) under contract number RYC2015-18820. We also warmly acknowledge the Laboratori Nazionali del Gran Sasso (LNGS) and the Dark Side collaboration for their help with TPB coating of various parts of the NEXT-White TPC. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving the management efficiency of GPU workloads in data centers through GPU virtualization

  • Iserte, Sergio
  • Reaño González, Carlos
  • Prades, Javier|||0000-0003-3349-2200
  • Silla, Federico|||0000-0002-6435-1200
[EN] Graphics processing units (GPUs) are currently used in data centers to reduce the execution time of compute-intensive applications. However, the use of GPUs presents several side effects, such as increased acquisition costs and larger space requirements. Furthermore, GPUs require a nonnegligible amount of energy even while idle. Additionally, GPU utilization is usually low for most applications. In a similar way to the use of virtual machines, using virtual GPUs may address the concerns associated with the use of these devices. In this regard, the remote GPU virtualization mechanism could be leveraged to share the GPUs present in the computing facility among the nodes of the cluster. This would increase overall GPU utilization, thus reducing the negative impact of the increased costs mentioned before. Reducing the amount of GPUs installed in the cluster could also be possible. However, in the same way as job schedulers map GPU resources to applications, virtual GPUs should also be scheduled before job execution. Nevertheless, current job schedulers are not able to deal with virtual GPUs. In this paper, we analyze the performance attained by a cluster using the remote Compute Unified Device Architecture middleware and a modified version of the Slurm scheduler, which is now able to assign remote GPUs to jobs. Results show that cluster throughput, measured as jobs completed per time unit, is doubled at the same time that the total energy consumption is reduced up to 40%. GPU utilization is also increased., Generalitat Valenciana, Grant/Award Number: PROMETEO/2017/077; MINECO and FEDER, Grant/Award Number: TIN2014-53495-R, TIN2015-65316-P and TIN2017-82972-R
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dynamic Reactive Assignment of Tasks in Real-Time Automated Guided Vehicle Environments with Potential Interruptions

  • Martín, Xabier A.
  • Hatami, Sara
  • Calvet, Laura
  • Peyman, Mohammad
  • Juan, Angel A.|||0000-0003-1392-1776
[EN] An efficient management of production plants has to consider several external and internal factors, such as potential interruptions of the ongoing processes. Automated guided vehicles (AGVs) are becoming a widespread technology that offers many advantages. These AGVs can perform complex tasks in an autonomous way. However, an inefficient schedule of the tasks assigned to an AGV can suffer from unwanted interruptions and idle times, which in turn will affect the total time required by the AGV to complete its assigned tasks. In order to avoid these issues, this paper proposes a heuristic-based approach that: (i) makes use of a delay matrix to estimate circuit delays for different daily times; (ii) employs these estimates to define an initial itinerary of tasks for an AGV; and (iii) dynamically adjusts the initial agenda as new information on actual delays is obtained by the system. The objective is to minimize the total time required for the AGV to complete all the assigned tasks, taking into account situations that generate unexpected disruptions along the circuits that the AGV follows. In order to test and validate the proposed approach, a series of computational experiments utilizing real-life data are carried out. These experiments allow us to measure the improvement gap with respect to the former policy used by the system managers., This work has been partially supported by the Spanish Ministry of Industry, Commerce and Tourism (AEI-010500-2021b-54), the EU Comission (HORIZON-CL4-2021-TWIN-TRANSITION-01-07, 101057294 AIDEAS), and the Generalitat Valenciana (PROMETEO/2021/065).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Phase stability and electronic structure of iridium metal at the megabar range

  • Monteseguro, V.
  • Cuartero, V.
  • Cova, F.
  • Abrikosov, I.A.
  • Olovsson, W.
  • Popescu, Catalin
  • Pascarelli, S.
  • Garbarino, G.
  • Jonsson, H.J.M.
  • Irifune, T.
  • ERRANDONEA, DANIEL
  • Sans-Tresserras, Juan Ángel|||0000-0001-9047-3992
[EN] The 5d transition metals have attracted specific interest for high-pressure studies due to their extraordinary stability and intriguing electronic properties. In particular, iridium metal has been proposed to exhibit a recently discovered pressure-induced electronic transition, the so-called core-level crossing transition at the lowest pressure among all the 5d transition metals. Here, we report an experimental structural characterization of iridium by x-ray probes sensitive to both long- and short-range order in matter. Synchrotron-based powder x-ray diffraction results highlight a large stability range (up to 1.4 Mbar) of the low-pressure phase. The compressibility behaviour was characterized by an accurate determination of the pressure-volume equation of state, with a bulk modulus of 339(3) GPa and its derivative of 5.3(1). X-ray absorption spectroscopy, which probes the local structure and the empty density of electronic states above the Fermi level, was also utilized. The remarkable agreement observed between experimental and calculated spectra validates the reliability of theoretical predictions of the pressure dependence of the electronic structure of iridium in the studied interval of compressions., The authors thank the financial support of the Spanish Ministry of Science, Innovation and Universities, the Spanish Research Agency (AEI), the European Fund for Regional Development (FEDER) under Grant No. MAT2016-75586-C4-1/2-P and the Generalitat Valenciana under Grant Prometeo/2018/123 (EFIMAT). V. M. acknowledges the Juan de la Cierva fellowship (FJCI-2016-27921) and J.A.S. acknowledges the Ramón y Cajal fellowship program (RYC-2015-17482) and Spanish Mineco Project FIS2017-83295-P. We acknowledge the European Synchrotron Radiation Facility for provision of official research beamtimes, the Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linköping University (Faculty Grant SFO-Mat-LiU No 2009 00971), Knut and Alice Wallenbergs Foundation Project Strong Field Physics and New States of Matter CoTXS (2014 2019). The interpretation of theoretical results was supported by the Ministry of Science and High Education of the Russian Federation in the framework of Increase Competitiveness Program of NUST MISIS (No. K2-2019-001) implemented by a governmental decree dated 16 March 2013, No 211.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Controlling Selectivity at the First Hydrogenation Level: Synthesis of 3-Hydroxyisoindolines by Heterogeneously Silver-Catalyzed Monohydrogenation of Phthalimides

  • Lluna-Galán, Carles
  • Adam, Rosa
  • Cabrero Antonino, Jose Ramón|||0000-0001-9628-9803
[EN] The development of robust nanocatalysts able to mediate important organic transformations with high levels of selectivity constitutes a hot topic in fine-chemistry and catalysis fields. In this context, the rational design of heterogeneous catalysts featuring suitable active sites for obtaining 3-hydroxyisoindolinones by the direct monohydrogenation of highly accessible phthalimides is an attractive approach. This work presents the design and successful catalytic application of a robust and recyclable [Ag/Al2O3] nanomaterial capable to promote the synthesis of a wide range of 3-hydroxylactams through the catalytic monohydrogenation of phthalimides with total atom-economy. It is important to remark that this transformation proceeds with full chemoselectivity, exhibiting complete tolerance to the presence of (hetero)aromatic rings and being able to stop the hydrogenation at the first intermediate level. A deep effort concerning material catalyst optimization and characterization study are performed, determining that the optimal [Ag/Al2O3] is composed of silver nanoparticles with an overall size of 2.3 nm homogeneously distributed across the alumina matrix. The characterization together with the performance of kinetic/mechanistic investigations allows to propose an intimate contact between accessible Ag0 sites and Lewis acidic centers is crucial for the catalyst system to perform the hydrogenative process with complete efficiency., This work was supported by the Generalitat Valenciana through SEJI (Subvencions Excelencia Juniors Investigadors, grants SEJI/2019/006 and SEJI/2020/013) and PROMETEO/2021/077 programs and the RETOS I+D+I program from MICINN (PID2019-109656RA-I0/AEI/10.13039/501100011033). The work was also supported by the Spanish Government via the CNS2024-154828 grant funded by MICIU/AEI/10.13039/501100011033 and CNS2023-144172 grant funded by MICIU/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR. Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is also gratefully acknowledged. J.R.C.-A. and R.A. thank MICINN (Spanish Government) for two Ramon y Cajal contracts (ref. RYC-2017-22717 and RYC2020-029493-I).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tetrathiafulvalene-Capped Hybrid Materials for the Optical Detection of Explosives

  • Salinas Soler, Yolanda
  • Jeppesen, Jan Oskar
  • Petersen, Lars H.
  • Soto Camino, Juan
  • Guillem, Carmen
  • Amoros del Toro, Pedro
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Sancenón Galarza, Félix|||0000-0002-5205-7135
  • Marcos Martínez, María Dolores|||0000-0001-7079-8589
[EN] Mesoporous silica microparticles capped with TTF moieties and containing a ruthenium dye in the pores were used for the turn-on optical detection of the nitroaromatic explosives Tetryl and TNT via a selective pore uncapping and release of the entrapped dye., Financial support from the Spanish Government (project MAT2012-38429-C04-01) and the Generalitat Valencia (project PROMETEO/2009/016) is gratefully acknowledged. Y.S. is grateful to the Spanish Ministry of Science and Innovation for her grant. J.O.J. gratefully acknowledge financial support provided by the Villum Foundation and the Danish Natural Science Research Council (#11-106744).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Topology and Excited State Multiplicity as Controlling Factors in the Carbazole-Photosensitized CPD Formation and Repair

  • Rodríguez Muñiz, Gemma María|||0000-0001-8989-2401
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Gómez-Mendoza, Miguel
  • Miró, Paula
  • García-Orduña, Pilar
  • Miranda Alonso, Miguel Ángel
[EN] Photosensitized thymine<>thymine (Thy<>Thy) formation and repair can be mediated by carbazole (Cbz). The former occurs from the Cbz triplet excited state via energy transfer, while the latter takes place from the singlet excited state via electron transfer. Here, fundamental insight is provided into the role of the topology and excited state multiplicity, as factors governing the balance between both processes. This has been achieved upon designing and synthesizing different isomers of trifunctional systems containing one Cbz and two Thy units covalently linked to the rigid skeleton of the natural deoxycholic acid. The results shown here prove that the Cbz photosensitized dimerization is not counterbalanced by repair when the latter, instead of operating through-space, has to proceed through-bond., Financial support from the Spanish Government (grant SEV- 2016-0683) , Generalitat Valenciana (PROMETEO/2017/075 and PROMETEO/2021/077) , and Technical University of Valencia (Predoctoral FPI fellowship for P.M.) is gratefully acknowledged. G.S. thanks CTI-CSIC for the use of computa- tional facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Real-time optimization of the key filtration parameters in an AnMBR: Urban wastewater mono-digestion vs. co-digestion with domestic food waste

  • Robles Martínez, Ángel
  • Capson-Tojo, G.
  • Ruano García, María Victoria
  • Seco Torrecillas, Aurora
  • FERRER, J.
[EN] This study describes a model-based method for real-time optimization of the key filtration parameters in a submerged anaerobic membrane bioreactor (AnMBR) treating urban wastewater (UWW) and UWW mixed with domestic food waste (FW). The method consists of an initial screening to find out adequate filtration conditions and a real-time optimizer applied to a periodically calibrated filtration model for minimizing the operating costs. The initial screening consists of two statistical analyses: (1) Morris screening method to identify the key filtration parameters; (2) Monte Carlo method to establish suitable initial control inputs values. The operating filtration cost after implementing the control methodology was (sic)0.047 per m(3) (59.6% corresponding to energy costs) when treating UWW and 0.067 per m(3) when adding FW due to higher fouling rates. However, FW increased the biogas productivities, reducing the total costs to (sic)0.035 per m(3). Average downtimes for reversible fouling removal of 0.4% and 1.6% were obtained, respectively. The results confirm the capability of the proposed control system for optimizing the AnMBR performance when treating both substrates. (C) 2018 Elsevier Ltd. All rights reserved., This research work was possible thanks to financial support from Generalitat Valenciana (project PROMETEO/2012/029) which is gratefully acknowledged. Besides, support from FCC Aqualia participation in INNPRONTA 2011 IISIS IPT-20111023 project (partially funded by The Centre for Industrial Technological Development (CDTI) and from the Spanish Ministry of Economy and Competitiveness) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the choice of the best members of the Kim family and the improvement of its convergence

  • Chicharro, Francisco I.|||0000-0001-9116-2870
  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Garrido-Saez, Neus|||0000-0002-7903-8591
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
Generalitat Valenciana, Grant/Award Number: PROMETEO/2016/089; Ministerio de Ciencia e Innovacion, Grant/Award Number: PGC2018-095896-B-C22
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

MIL-101(Cr)-NO2 as efficient catalyst for the aerobic oxidation of thiophenols and the oxidative desulfurization of dibenzothiophenes

  • Vallés-García, Cristina
  • Santiago-Portillo, Andrea
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] A series of MIL-101(Cr)-X functionalized with electron withdrawing (NO2, SO3H or Cl) or electron donor (NH2 or CH3) groups has been tested for the solvent-free oxidative coupling of thiophenol to disulfides. No byproducts were observed. A relationship between the catalytic activity of these MOFs with the substituent meta Hammet constant on the terephthalate ligand and with their redox potential was found, MIL-101(Cr)-NO2 being the most active catalyst. NO2-substituted MIL-101 is also more efficient than the parent MIL-101(Cr) to promote the aerobic desulfurization of dibenzothiophenes in n-dodecane or commercial Diesel as solvent. No byproduct formation was observed. Mechanistic studies reveal that MIL-101(Cr)-NO2 is acting as heterogeneous catalyst in thiophenol oxidation and as radical initiator for the aerobic desulfurization. For both reactions, the catalyst can be reused without deactivation, maintaining its crystallinity and with negligible metal leaching., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa and RTI2018-098237-CO21) and Generalitat Valenciana (Prometeo 2017/083) is gratefully acknowledged. S.N. thanks financial support by the Fundacion Ramon Areces (XVIII Concurso Nacional para la Adjudicacion de Ayudas a la Investigacion en Ciencias de la Vida y de la Materia, 2016), Ministerio de Ciencia, Innovacion y Universidades CTQ-2018 RTI2018-099482-A-I00 project and Generalitat Valenciana grupos de investigacion consolidables 2019 (AICO2019/214 project).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

An SMT-Based Concolic Testing Tool for Logic Programs

  • Fortz, Sophie
  • Mesnard, Fred
  • Payet, Etienne
  • Perrouin, Gilles
  • Vanhoof, Wim
  • Vidal, Germán|||0000-0002-1857-6951
[EN] Concolic testing combines symbolic and concrete execution to generate test cases that achieve a good program coverage. Its benefits have been demonstrated for more than 15 years in the case of imperative programs. In this work, we present a concolic-based test generation tool for logic programs which exploits SMT-solving for constraint resolution, Third author is a research associate at FNRS that also supports this work (O05518FRG03). The last author is partially supported by the EU (FEDER) and the Spanish MCI/AEI under grants TIN2016-76843-C4-1-R/PID2019-104735RB-C41 and by the Generalitat Valenciana under grant Prometeo/2019/098 (DeepTrust)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A SiGe Slot Approach for Enhancing Strain Induced Pockels Effect in the Mid-IR Range

  • Olivares-Sánchez-Mellado, Irene
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] Strained silicon was proposed more than a decade ago promising to revolutionize the silicon photonics field by allowing efficient modulation in this platform. Despite all the efforts, still rather low chi(2) values have been measured in strained silicon devices. In addition, the way of applying strain has not barely changed since the concept was proposed, usually consisting on a silicon waveguide covered by a stressor material such as silicon nitride. In this letter, a SiGe slot approach is explored as a different route to enhance the strain induced Pockels effect in the mid-IR range. Such approach would allow effective index change values which are near to 10(-4) and improve the values expected for the most common silicon - silicon nitride structure by more than three orders of magnitude., This work was supported in part by the Ministerio de Ciencia e Innovacion under Grant TEC2016-76849 and Grant PID2019-111460GB-I00 and in part by the Generalitat Valenciana under Grant PROMETEO/2019/123.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The evolutionary genetics of emerging plant RNA viruses

  • Elena Fito, Santiago Fco
  • Bedhomme, Stephanie
  • Carrasco, Purificación
  • Cuevas, Jose M.
  • De la Iglesia Jordán, Francisca
  • Lafforgue, Guillaume
  • Lalic, Jasna
  • Prosper Pontones, Angels
  • Tromas, Nicolas
  • Zwart, Mark Peter
[EN] Over the years, agriculture across the world has been compromised by a succession of devastating epidemics caused by new viruses that spilled over from reservoir species or by new variants of classic viruses that acquired new virulence factors or changed their epidemiological patterns. Viral emergence is usually associated with ecological change or with agronomical practices bringing together reservoirs and crop species. The complete picture is, however, much more complex, and results from an evolutionary process in which the main players are ecological factors, viruses' genetic plasticity, and host factors required for virus replication, all mixed with a good measure of stochasticity. The present review puts emergence of plant RNA viruses into the framework of evolutionary genetics, stressing that viral emergence begins with a stochastic process that involves the transmission of a preexisting viral strain into a new host species, followed by adaptation to the new host., This work has been supported by grants BFU2009-06993 (Ministerio de Ciencia e Innovacion, Madrid, Spain), RGP2008/12 (Human Frontiers Science Organization), ACOMP2010-089 and PROMETEO2010-019 (Generalitat Valenciana).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A fast algorithm to solve systems of nonlinear equations

  • Amiri, Abdolreza
  • Darvishi, M.T.
  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
[EN] A new HSS-based algorithm for solving systems of nonlinear equations is presented and its semilocal convergence is proved. Spectral properties of the new method are investigated. Performance profile for the new scheme is computed and compared with HSS algorithm. Besides, by a numerical example in which a two-dimensional nonlinear convection diffusion equation is solved, we compare the new method and the Newton-HSS method. Numerical results show that the new scheme solves the problem faster than the NewtonHSS scheme in terms of CPU -time and number of iterations. Moreover, the application of the new method is found to be fast, reliable, flexible, accurate, and has small CPU time., This research was partially supported by Ministerio de Economia y Competitividad, Spain under grants MTM2014-52016-C2-2-P and Generalitat Valenciana, Spain PROMETEO/2016/089.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Traceability Link Recovery between Requirements and Models using an Evolutionary Algorithm Guided by a Learning to Rank Algorithm: Train control and management case

  • Marcén, Ana C.
  • Lapeña, Raúl
  • Pastor López, Oscar|||0000-0002-1320-8471
  • Cetina Englada, Carlos
[EN] Traceability Link Recovery (TLR) has been a topic of interest for many years within the software engineering community. In recent years, TLR has been attracting more attention, becoming the subject of both fundamental and applied research. However, there still exists a large gap between the actual needs of industry on one hand and the solutions published through academic research on the other. In this work, we propose a novel approach, named Evolutionary Learning to Rank for Traceability Link Recovery (TLR-ELtoR). TLR-ELtoR recovers traceability links between a requirement and a model through the combination of evolutionary computation and machine learning techniques, generating as a result a ranking of model fragments that can realize the requirement. TLR-ELtoR was evaluated in a real-world case study in the railway domain, comparing its outcomes with five TLR approaches (Information Retrieval, Linguistic Rule-based, Feedforward Neural Network, Recurrent Neural Network, and Learning to Rank). The results show that TLR-ELtoR achieved the best results for most performance indicators, providing a mean precision value of 59.91%, a recall value of 78.95%, a combined F-measure of 62.50%, and a MCC value of 0.64. The statistical analysis of the results assesses the magnitude of the improvement, and the discussion presents why TLR-ELtoR achieves better results than the baselines., This work has been developed with the financial support of the Spanish State Research Agency and the Generalitat Valenciana under the projects DataME TIN2016-80811-P, ALPS RT12018-096411-B-100, ACIF/2018/171 and PROMETEO/2018/176, and co-financed with ERDF.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Estudio, informe, memoria (Report)

Una Encuesta acerca de la Definición de Conceptos de Ciberseguridad, A Survey on the Definition of Cybersecurity Concepts

  • Serrano Gil, Lenin Javier
  • Franco Martins Souza, Beatriz
  • Reyes Román, José Fabián
  • Panach Navarrete, José Ignacio
  • Pastor López, Oscar|||0000-0002-1320-8471
Hoy en día brindar una gestión eficaz y eficiente de la “Ciberseguridad” es una actividad fundamental. En este contexto, la identificación de activos y la consideración de sus características de seguridad pueden reducir las amenazas del negocio. Por esta razón, las asociaciones de estándares como el International Organization for Standardization and International Electrotechnical Commission (ISO/IEC), la industria representada en el Object Management Group (OMG), entre otras, incluida la academia, desarrollan activamente enfoques/t´ecnicas, herramientas y mecanismos para brindar soluciones eficientes. Así, es como se exploran los Grafos de Conocimiento (Knowledge Graphs – KG) apoyados en Inteligencia Artificial (AI) para realizar análisis de seguridad en modelos organizacionales. Sin embargo, el uso de estos artefactos añade nuevos desafíos, destacando la complejidad en la interpretación, el arbitraje, el intercambio de términos y definiciones en la especificación del modelo. Además, la gestión de grafos es una tarea de orden superior, ya que se generan a partir de diversas fuentes y de una gran cantidad de información. De acuerdo con lo anterior hemos iniciado un estudio piloto que descubre en primera instancia el estado del arte en “Ontologías de Ciberseguridad”. Con el fin de proponer una base ontológica de referencia que contribuya en la generación y evite malas interpretaciones durante el desarrollo de grafos de conocimiento. En este documento, se presenta la segunda iteración del estudio con el objetivo específico de expandir nuestro enfoque en la terminología y definición de conceptos de Ciberseguridad a través de un experimento., Este trabajo ha sido desarrollado bajo el marco de los proyectos”Digital Knowledge Graph – Adaptable Analytics API” y ”PROMETEO/2018/176”con el apoyo financiero de Accenture LTD y la Generalitat Valenciana co-financiadacon ERDF.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient NiFe-Layered Double Hydroxide Electrocatalyst Synthesized via a Solvent-Free Mechanochemical Method for Oxygen Evolution Reaction

  • Molina-Muriel, Manuel
  • Campagna Zignani, Sabrina
  • Ribera, Antonio
  • Aricò, Antonino Salvatore
  • Goberna-Ferrón, Sara|||0000-0002-3306-3791
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] The growing concern over climate change and the reliance on fossil fuels has spurred interest in alternative energy processes, particularly electrochemical water splitting to produce hydrogen (H2). This study focuses on developing cost-effective and efficient oxygen evolution reaction (OER) electrocatalysts. We report a novel solvent-free mechanochemical method for synthesizing NiFe-layered double hydroxide (LDH), which demonstrates promising electrocatalytic properties for the OER. The mechanochemical synthesis, requiring only 1 h of solid reagent grinding, produces NiFe-LDH with structural features comparable to those obtained via traditional aqueous phase methods. The electrocatalyst was evaluated in a single cell with a membrane-electrode assembly configuration under alkaline conditions, exhibiting an overpotential of 221 mV at a current density of 10 mA<middle dot>cm-2 and a Tafel slope of 103.1 mV<middle dot>dec-1, indicating excellent OER kinetics and low energy barriers. Additionally, the catalyst demonstrated robust durability, maintaining a potential of around 1.55 V during a 35 h test at high current densities of 0.1 A<middle dot>cm-2 and even 1.75 V at 1 A<middle dot>cm-2. This work highlights the potential of NiFe-LDH synthesized by an energy-efficient, environmentally green, and scalable process for large industrial water-splitting applications, contributing to the advancement of sustainable hydrogen production technologies., The authors acknowledge the financial support provided by the EU H2020 GREEN DEAL "ECO2FUEL" project "Large-scale low-temperature electrochemical CO2 conversion to sustainable liquid fuels" Grant Agreement number: 101037389. Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S, PID2021-0126071-OB-CO21, and PID2021-125907NB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER) and Generalitat Valenciana (Prometeo 2021-038, CIPROM-2022-60, and Advanced Materials Program MFA-2022-023 and MFA-2022-057 with funding from European Union Next Generation EU PRTR-C17.I1) are gratefully acknowledged. M.M. thanks the Universitat Politecnica de Valencia for a postgraduate scholarship. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Patterned Biolayers of Protein Antigens for Label-Free Biosensing in Cow Milk Allergy

  • Juste-Dolz, Augusto Miguel|||0000-0003-4889-6419
  • Puchades, Rosa|||0000-0002-9329-1593
  • Avella-Oliver, Miquel|||0000-0002-7293-6989
  • Maquieira, Angel|||0000-0003-4641-4957
  • Fernández-Sánchez, María Estrella
[EN] This paper focuses on creating one-dimensional diffractive grooved structures of antigen proteins on glass substrates for the label-free detection of antibodies to dairy allergens. In particular, the fabrication of protein structures is carried out by combining microcontact printing with physisorption, imines coupling, and thiol-ene click chemistry. The work first sets up these patterning methods and discusses and compares the main aspects involved in them (structure, biolayer thickness, functionality, stability). Homogeneous periodic submicron structures of proteins are created and characterized by diffractive measurements, AFM, FESEM, and fluorescence scanning. Then, this patterning method is applied to proteins involved in cow milk allergy, and the resulting structures are implemented as optical transducers to sense specific immunoglobulins G. In particular, gratings of bovine serum albumin, casein, and ß-lactoglobulin are created and assessed, reaching limits of detection in the range of 30¿45 ng·mL¿1 of unlabeled antibodies by diffractive biosensing., Grant PID2019-110713RB-I00 funded by MCIN/AEI/10.13039/501100011033 and cofunded by "ERDF A way of making Europe", Generalitat Valenciana (PROMETEO/2020/094), and Universitat Politecnica de Valencia (PAID-06-22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Demonstration of neutrinoless double beta decay searches in gaseous xenon with NEXT

  • Novella, P.
  • Sorel, M.
  • Usón, A.
  • Adams, C.
  • Almazán, H.
  • Aparicio, B.
  • Aranburu, A. I.
  • Arazi, L.
  • Arnquist, I.J.
  • Auria-Luna, F
  • Ayet, S.
  • C.D.R. Azevedo
  • Bailey, K.
  • Rodriguez-Samaniego, Javier
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] The NEXT experiment aims at the sensitive search of the neutrinoless double beta decay in Xe-136, using high-pressure gas electroluminescent time projection chambers. The NEXT-White detector is the first radiopure demonstrator of this technology, operated in the Laboratorio Subterr & aacute;neo de Canfranc. Achieving an energy resolution of 1% FWHM at 2.6 MeV and further background rejection by means of the topology of the reconstructed tracks, NEXT-White has been exploited beyond its original goals in order to perform a neu-trinoless double beta decay search. The analysis considers the combination of 271.6 days of Xe-136-enriched data and 208.9 days of 136Xe-depleted data. A detailed background mod-eling and measurement has been developed, ensuring the time stability of the radiogenic and cosmogenic contributions across both data samples. Limits to the neutrinoless mode are obtained in two alternative analyses: a background-model-dependent approach and a novel direct background-subtraction technique, offering results with small dependence on the background model assumptions. With a fiducial mass of only 3.50 +/- 0.01 kg of Xe-136-enriched xenon, 90% C.L. lower limits to the neutrinoless double beta decay are found in the T-1/2(0 nu) > 5.5x10(23) -1.3x10(24) yr range, depending on the method. The presented techniques stand as a pro of-of-concept for the searches to be implemented with larger NEXT detectors., The NEXT Collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under Grant Agreement No. 951281-BOLD; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under Grant Agreement No. 957202-HIDDEN; the MCIN/AEI of Spain and ERDF A way of making Europe under grants PID2021-125475NB and the Severo Ochoa Program grant CEX2018-000867-S; the Generalitat Valenciana of Spain under grants PROMETEO/2021/087 and CIDEGENT/2019/049; the Department of Education of the Basque Government of Spain under the predoctoral training program non-doctoral research personnel; the Spanish la Caixa Foundation (ID 100010434) under fellowship code LCF/BQ/PI22/11910019; the Portuguese FCT under project UID/FIS/04559/2020 to fund the activities of LIBPhys-UC; the Israel Science Foundation (ISF) under grant 1223/21; the Pazy Foundation (Israel) under grants 310/22, 315/19 and 465; the US Department of Energy under contracts number DE-AC02-06CH11357 (Argonne National Laboratory), DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M), DE-SC0019054 (Texas Arlington) and DE-SC0019223 (Texas Arlington); the US National Science Foundation under award number NSF CHE 2004111; the Robert A Welch Foundation under award number Y-2031-20200401. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrocatalytic oxidation of ascorbic acid on mesostructured SiO2-conducting polymer composites

  • Rivero, Omar
  • Huerta, Francisco
  • Montilla, Francisco
  • Sanchis, C.
  • Morallón, Emilia
The conducting self-doping copolymer poly(aniline-co-ABA) preserves its redox activity at pH values as high as 7. This observation was the starting point to synthesize an organic inorganic hybrid composite able to electrochemically oxidize ascorbic acid molecules at that pH. The inorganic part of the catalytic element was an ordered mesoporous electrodeposit of SiO2, which has been used as the template for the electrochemical insertion of the self-doping copolymer. The oxidation of ascorbate ions at a fixed potential on this composite was studied by means of the kinetic model proposed by Bartlett and Wallace (2001). It was observed that the effective kinetic constant K-ME increased significantly but, simultaneously, k'(ME) remained almost constant when the composite was employed as the electrocatalytic substrate. These results were interpreted in the light of two combinations of kinetic constants, which strongly suggested that the increase in K-ME should be ascribed to the improvement in electronic conductivity of the copolymer induced by the highly ordered silica template. (C) 2015 Elsevier Ltd. All rights reserved., Financial support from the Spanish Ministerio de Economia y Competitividad and FEDER funds (MAT2013-42007-P), from the Generalitat Valenciana (PROMETE02013/038) and from the Fundacion Ramon Areces is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

La dependencia energética en España por sectores y su impacto económico

  • Galdón-Ruiz, Jose Antonio
  • Marí, B.|||0000-0003-0001-419X
  • Guaita-Pradas, Inmaculada|||0000-0003-4116-2375
[ES] Este artículo describe la situación histórica de España frente a la dependencia energética y la evolución en los últimos años. Se analiza la dependencia energética en función de los diferentes sectores, en concreto el sector industrial, el transporte y el de usos diversos donde estarán incluidos la Agricultura, Pesca, Comercio, Servicios y Administraciones Públicas, el Residencial y otros. A partir del análisis del mix de consumo energético de cada uno de los tres sectores objeto del estudio, se realizarán una serie de propuestas para reducir la dependencia energética en los mismos, comprobando los importantes beneficios económicos directos que tendrán para la economía española. Este estudio permite concluirde que con una correcta planificación a medio y largo plazo, se pueden poner en marcha medidas encaminadas a la reducción de la dependencia energética y que a su vez sean menos contaminantes, sin que ello tenga un coste adicional en nuestra economía. En este estudio solo se han considerado los beneficios directos por el ahorro de los intereses para financiar las importaciones de energía que se evitan, sin tener en cuenta el ahorro en los bonos de emisión de CO2, los beneficios medioambientales, o la generación inducida de empleo y riqueza que se desprenderían de la puesta en marcha de las acciones propuestas y de una mayor utilización de fuentes de energía propias., Este trabajo ha sido parcialmente financiado por la Generalitat valenciana en el marco del proyecto Prometeus 2014/044.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Stability of 3D-porous Ni/Cu cathodes under real alkaline electrolyzer operating conditions and its effect on catalytic activity

  • Valero Vidal, Carlos
  • Igual Muñoz, Anna Neus
  • Herraiz Cardona, Isaac|||0000-0001-5829-6594
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
Despite the development and synthesis of new electrode materials for hydrogen generation in alkaline water electrolyzers has been a research topic widely exploited in the last years, stability tests on the obtained cathodes have been restricted to long-term potentiostatic/galvanostatic experiments which do not fulfil the real operating conditions that take place in those devices. In this work, two different Service Life Tests have been designed and implemented, aiming at including particular conditions (i.e. inverse polarity and short-circuit) in the durability and catalytic activity of cathode characterization. For this purpose, Ni/Cu bilayered porous electrodes were prepared using different Ni electrodeposition times (15, 30 and 45 min) following a double template electrochemical method. It has been confirmed that the electrode with the lowest Ni content can be considered as a promising electrocatalyst for hydrogen production under industrial conditions because of its optimal activity and stability after the two sets of testing conditions. In particular, electrochemical studies demonstrated that an inversion in polarity can positively affect the electrode performance, as a consequence of the synergetic interaction between CuO/Cu(OH)(2) and beta-Ni(OH)(2) species formed at potentials below the oxygen evolution domain., The authors gratefully acknowledge financial support given by the Generalitat Valenciana (PROMETEO/2010/023) and Spanish Government (Ministerio de Ciencia e Innovation) for the postgraduate grants AP2007-01243 (Carlos Valero-Vidal) and AP2007-03737 (Isaac Herraiz-Cardona).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enzyme-responsive intracellular controlled release using nanometric silica mesoporous supports capped with &quot, saccharides&quot

  • Bernardos Bau, Andrea|||0000-0002-3842-5771
  • Aznar, Elena|||0000-0003-0361-3876
  • Marcos Martínez, María Dolores|||0000-0001-7079-8589
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Sancenón Galarza, Félix|||0000-0002-5205-7135
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
  • Mondragón Martínez, Laura
  • Soto Camino, Juan
  • Pérez Payá, Enrique
  • Guillem, Carmen
  • Amorós, Pedro
The synthesis of new capped silica mesoporous nanoparticles for on-command delivery applications is described. The gate-like functional hybrid systems consisted of nanoscopic MCM-41-based materials functionalized on the pore outlets with different “saccharide” derivatives and a dye contained in the mesopores. A series of hydrolyzed starch products as saccharides were selected. The mesoporous silica nanoparticles S1, S2, and S3 containing the grafted starch derivatives Glucidex 47, Gludicex 39, and Glucidex 29 were synthesized. Additionally, for comparative purposes solid S4 containing lactose was prepared. Delivery studies in pure water in the presence of pancreatin or -D-galactosidase were carried out for S1S3 and S4, respectively. S1, S2, and especially S3 showed very low release in the absence of enzyme, but displayed cargo delivery in the presence of the corresponding enzyme. Moreover, nanoparticles of S1 were used to study the controlled release of the dye in intracellular media. Cell viability assays using HeLa and LLC-PK1 cells indicated that S1 nanoparticles were devoid of unspecific cell toxicity. The endocytosis process for S1 nanoparticle internalization in HeLa cells was confirmed, and the anchored starch was degraded by the lysosomal enzymes. Furthermore, a new mesoporous silica nanoparticle functionalized with Glucidex 47 and loaded with a cytotoxic, S1-DOX, was developed. The cell viability with S1-DOX decreased due to the internalization of the nanoparticle, enzyme-dependent opening of the saccharide molecular gate and the consequent release of the cytotoxic agent. As far as the authors know, this is the first example of enzyme-induced in-cell delivery using capped silica mesoporous nanoparticles., The authors wish to express their gratitude to the Spanish Government (Projects MAT2009 14564 C04 01 MAT2009 14564 C04 04 and BIO2007 60066) and the Generalitat Valencia (Projects PROMETEO/2009/016 and PROMETEO/2010/005) for support A B is grateful to the Universidad Politecnica de Valencia for an FPI grant E A thanks the MICINN for a FPU contract We thank Roquette for the Glucidex samples We would like to thank the CIPF confocal microscopy service for technical support
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Neville elimination on multi- and many-core systems: OpenMP, MPI and CUDA

  • Alonso, P.
  • Cortina, R.
  • Ranilla, J.
  • Martínez Zaldívar, Francisco José|||0000-0002-7845-6273
[EN] This paper describes several parallel algorithmic variations of the Neville elimination. This elimination solves a system of linear equations making zeros in a matrix column by adding to each row an adequate multiple of the preceding one. The parallel algorithms are run and compared on different multi- and many-core platforms using parallel programming techniques as MPI, OpenMP and CUDA. © 2009 Springer Science+Business Media, LLC., This work has been supported by project TIN2007-61273 and FEDER, and by INCO2 (Excellence Group founded by PROMETEO 2009/013, High Performance Computing on Current Architectures in Multiple Signal Processing Problems, Generalitat Valenciana).