Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 49
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tailoring the structure and photocatalytic properties of [1] benzothieno [3,2-b] [1] benzothiophene (BTBT)-based porous organic polymers

  • Borrallo-Aniceto, M. Carmen
  • Gonzalez-Aguilera, Laura
  • Ferrer, Maria Luisa
  • Iglesias, Marta
  • Maya, Eva M.
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] The organic semiconductor [1]benzothieno[3,2-b][1]benzothiophene (BTBT) has been incorporated into porous organic polymers to create heterogeneous photocatalysts with tunable structural and electronic properties. In this study, four BTBT-based polymeric networks, BTBT-HCP, BTBT-CTF, BTBT-CMP, and BTBT-PAF were synthesized using different strategies, including Friedel-Crafts reactions and palladium-catalyzed cross-coupling methods. The resulting materials exhibited distinct thermal and optical properties, with the latter showing a strong correlation with their catalytic performance. All four photocatalysts were evaluated in the photooxidation of aromatic alcohols. Among them, BTBT-CTF, which has direct bonds between the BTBT and triazine units, demonstrated the highest efficiency and was further employed in a one-pot, two-step reaction for the photo-oxidative synthesis of benzimidazoles. This process combined the initial photooxidation of aromatic alcohols with a subsequent condensation with o-phenylenediamine without isolating the intermediate aldehyde. These results highlight the potential of BTBT-based materials for sustainable photooxidations and light-driven heterocyclic synthesis., This research was funded by MICIU/AEI/10.13039/501100011033 and FEDER, UE through PID2023-146114NB-C22, PID2023-146114NB-C21, PID2024-155161OB-I00 projects. Authors acknowledge the Severo Ochoa Centers of Excellence program through Grant CEX2024-001445-S.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

CO2 conversion to cyclic carbamates through alternative coupling routes catalyzed by hypercrosslinked polymer-supported NHC-Cu complexes

  • Fuerte-Diez, Beatriz
  • Iglesias, Marta
  • Maya, Eva M.
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] The catalytic conversion of CO2 into value-added chemicals is an important strategy for CO2 utilization. Herein, hypercrosslinked polymer-supported N-heterocyclic carbene-copper complexes (HCP-NHC-Cu) are synthesized in a single step from imidazolium-based hypercrosslinked polymers and evaluated as heterogeneous catalysts for the conversion of CO2 to cyclic carbamates. Owing to their robustness and insolubility, these materials operate as efficient heterogeneous catalysts in complementary coupling pathways, in three-component coupling reactions involving CO2, propargylic alcohols, and primary amines, as well as the coupling reaction of CO2 with propargylic amines, affording cyclic carbamates in quantitative yields and high selectivity. Cyclic carbamates are obtained in quantitative yields and high selectivity under moderate conditions (CO2 pressure of 5 bar, temperatures of 60-120 degrees C, and reaction times of 4-16 h). The excellent performance of the novel catalysts is attributed to a cooperative effect arising from CO2-philic NHC ligands working in concert with catalytically active Cu(I) sites., This research was supported by the project CATCO2NVERS funded by the European Union Horizon 2020 research and innovation program under grant agreement No 101000580 and MICIU/AEI/10.13039/501100011033 FEDER, UE through PID2023-146114NB-C22, PID2023-146114NB-C21. Authors acknowledge the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of functionalization on axially substituted 2,7-pyrene covalent triazine frameworks for dual sensing applications

  • Borrallo-Aniceto, M. Carmen
  • Fuerte-Diez, Beatriz
  • Valverde-Gonzalez, Antonio
  • Gonzalez-Aguilera, Laura
  • Ferrer, M. Luisa
  • Lillo, M. Pilar
  • Maya, Eva M.
  • Iglesias, Marta
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] To advance the critical goal of selective pollutant detection for environmental remediation, we have developed two classes of covalent triazine frameworks (CTFs). The first incorporates a 2,7-pyrene moiety, resulting in a donor-acceptor CTF, while the second type has a donor-(it-spacer)-acceptor configuration through the integration of pyrene-aryl or pyrene-fluoroaryl-1,3,5-triazine units (2,7-arylPyr-CTFs). Additionally, a partially fluorinated CTF (CTFmix) was synthesized by co-polymerizing fluorinated and non-fluorinated dinitrile monomers. All CTFs were obtained via acid-catalyzed cyclotrimerization and thoroughly characterized using different spectroscopic and analytical techniques. Giving the high chemical stability, enhanced light-harvesting ability, and efficient charge separation and transfer properties of pyrene-based-CTFs, we have investigated the influence of functional groups, particularly fluorine, on their environmental analyte sensing. Our results show that these Pyrene-CTFs are effective fluorescent probes for the selective detection of picric acid (PA) and the pesticide dicloran (DCNA). Among then, the mixed fluorinated CTF, exhibited the highest sensitivity, achieving detection limits in the ppm range. Furthermore, this material showed high selectivity towards metal ions such as Au3+ or Fe3+, with fluorescence recovery observed up to six cycles upon the addition of ascorbic acid., The authors acknowledge funding from the Spanish government through grants PID2023-146114NB-C22, PID2023-146114NB-C21, PID2021-123287OB-I00 and PID2021-123648OB-100 (all funded by MICIU/AEI/10.13039/501100011033, and from EU FEDER) , and the Severo Ochoa Centres of Excellence program (Grant CEX2024-001445-S) . M.P.L. acknowledges A. Guirao for TCSPC instrumental support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Covalent organic frameworks as nanocarriers of tailored BODIPY for phototheragnostic applications

  • Jimenez-Duro, Miguel
  • Soler-Beatty, Jennifer
  • Martinez-Fernandez, Marcos
  • Avellanal-Zaballa, Edurne
  • Martinez, Jose I.
  • Ortiz, Maria J.
  • Duran-Sampedro, Gonzalo
  • Banuelos, Jorge
  • Segura, Jose L.
  • Soriano-Teruel, Paula
  • García-Fernández, Alba|||0000-0002-8416-1674
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
[EN] Grafting fluorophores and photosensitizers onto nanocarriers is recognized as an effective strategy for fluorescent bioimaging and photodynamic therapy. This approach enhances targeted drug delivery to tumor sites, while improving the biocompatibility and stability of poorly water-soluble bioprobes, thereby reducing side effects. Among the available organic dyes and nanoparticles, BODIPY and COF stand out as a compatible pair for this purpose. To leverage the COF-BODIPY scaffold as a photoactive platform for biomedical applications, we have optimized their integration. To this aim, first, BODIPY units were functionalized to enable strong binding to specific sites of the COF via click chemistry, positioning the BODIPY within the pores of the COF. Following this approach, BODIPY derivatives photoactive across different spectral regions (from the green to the red window) were straightforwardly grafted onto the COF. The structural and photophysical properties of these nanomaterials were thoroughly characterized. Notably, the COF bearing styrylated and iodinated BODIPY was especially appealing due to its dual photonic performance, enabling both singlet oxygen generation and red fluorescence under long-wavelength excitation. Upon its cellular uptake by human melanoma cells, this dyed nanoparticle selectively stained lysosomes, and at the same time triggered a cytotoxic response to induce cell death under illumination with red light, thus being a suitable candidate for theragnostic purposes., This research was supported by projects: TED2021-129886B-C43 granted by MCIN/AEI/10.13039/501100011033 and the European Union NextGeneration EU/PRTR; PID2021-128141OB-C22 and PID2021-126304OB-C41 funded by MCIN/AEI/10.13039/501100011033/and by European Regional Development Fund - A way of doing Europe; PID2022-138908NB-C33 and PID2024-157648-NB-C22 granted by MICIU/AEI/10.13039/501100011033 and FEDER, UE. This study was also supported by Generalitat Valenciana (CIPROM/2021/007) and Gobierno Vasco (IT1639-22). The work was supported by CIBER -Consorcio Centro de Investigacion Biomedica en Red- (CB06/01/2012), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovacion. J. L. S. acknowledges the MICIIN for the REDES project "RED2022-134503-T". P. M. S-T. is grateful to the Generalitat Valenciana for a postdoctoral Investigo contract (INVEST/2023/443). J. I. M. acknowledges funding from Spanish MCIN (Grants PID2023-149077OB-C31, TED2021-12941A-I00 and PLEC2021-007906 funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR"), and Comunidad de Madrid (Grant TEC-2024/TEC-459). The Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

One-step decomposition pathway for solution-derived metal oxide layers driven by hydroxyl radical atmospheres

  • Rivas, Y. A.
  • Echaniz-Cintora, M.
  • Barreto, A.
  • Molina-Calzada, J. A.
  • Serrano, M. C.
  • Jimenez, R.
  • Bretos, I.
  • Calzada, M. L.
  • Vidal Moya, José Alejandro
[EN] Solution deposition of high-performance oxide films has attracted intense research interest driven by the need for sustainable synthesis strategies that simplify key processes such as ligand removal, oxidation of organic residues, and the formation of amorphous and crystalline oxide phases. These approaches aim not only to reduce the carbon footprint but also to lower the thermal budget required for oxide film formation, thereby enabling direct, large-area deposition on low-cost, temperature-sensitive substrates required for emerging applications in thin-film electronics. In this work, we elucidate the chemical mechanism underlying the crystallization of solution-processed metal oxide films under highly reactive hydroxyl ((OH)-O-center dot) radical atmospheres. These radicals promote a simple, rapid, one-step decomposition of solution-derived films, directly yielding crystalline oxide films with substantially reduced energy input compared with conventional solution-deposition processes. Because this mechanism is independent of solution chemistry and oxide formulation, the platform is broadly applicable to diverse solution chemistries, crystalline oxides, and substrates. As a representative demonstration, BiFeO3 perovskite films are fabricated on flexible polyimide substrates, producing biocompatible, multifunctional flexible films., This work was supported by the Spanish projects PID2022-136790OB-I00, PID2021, CNS2022-135743 and TED2021-130871BC21 funded by MCIN/AEI/10.13039/501100011033 and the European Union through the "NextGeneration EU"/PRTR initiative. The Severo Ochoa Centres of Excellence program is acknowledged through Grant CEX2024-001445-S. A. B acknowledges financial support of the CAM PhD grant from the Comunidad de Madrid (PIPF-2024ECO-33982). The authors acknowledge Teresa Blasco Ibanez for contributing to the interpretation and discussion of the Electron Paramagnetic Resonance (EPR) results of the samples obtained at the Instituto de Tecnologia Quimica (UPV-CSIC), Universitat Politecnica de Valencia - Consejo Superior de Investigaciones Cientificas. The Advanced Light Microscopy Service at the Centro Nacional de Biotecnologia (CNB-CSIC) is acknowledged for assistance with confocal microscopy studies. The Scanning Electron Microscopy Service at the Instituto de Micro y Nanotecnologia (IMN-CSIC) is acknowledged for support with SEM studies. The MiNa Laboratory at IMN acknowledges its funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794), and EU (FEDER, FSE)".
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Plasmonic nanoparticles boost low-current perovskite LEDs governed by photon recycling effects

  • Bueno, Jaime
  • Jiménez-Solano, Alberto
  • Anaya, Miguel
  • Carretero-Palacios, Sol
Perovskite light-emitting diodes (PeLEDs) have emerged as a promising technology for next-generation display and lighting applications, thanks to their remarkable colour purity, tunability, and ease of fabrication. In this work, we explore the incorporation of plasmonic spherical nanoparticles (NPs) directly embedded into the green-emitting CsPbBr3 perovskite layer in a PeLED as a strategy to enhance both its optical and electrical properties. We find that plasmonic effects directly boost spontaneous emission while also influencing charge carrier recombination dynamics. We present a rigorous theoretical electro-optical analysis to systematically investigate the impact of NP metal, size, and concentration on device performance, with particular emphasis on the role of photon recycling (PR). Our results demonstrate that embedding carefully designed silver (Ag) NPs, selected through rigorous theoretical modelling, into PeLEDs leads to enhanced device performance across a wide range of operating currents. Notably, we observe a 4-fold improvement in external quantum efficiency (EQE) at injection currents as low as 0.02 mA cm-2, and a 2-fold enhancement at 0.2 mA cm-2, attributed to increased radiative recombination. Furthermore, results suggest improved efficiency retention at higher injection levels, pointing to reduced current roll-off limitations and extended high-brightness operation. Additionally, PR plays a crucial role in mitigating optical losses and improving outcoupling efficiency, especially in plasmonic-enhanced systems, where scattering effects increase the prevalence of trapping states. These findings open up exciting possibilities for devices requiring energy-efficient, compact, and high-performance light sources, such as portable electronics and low-power displays., M. A. acknowledges financial support from the MICIU/AEI/ 10.13039/501100011033 and the European Union NextGenerationEU/PRTR through a Ram´on y Cajal Fellowship (RYC2021-034941-I). M. A. also acknowledges the BBVA Foundation for their support through a Leonardo Fellowship. A. J.-S. gratefully acknowledges Spanish Ministry of Universities for funding through a Beatriz Galindo Fellowship (BG20/00015). S. C y J. B acknowledge the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S. J. B also acknowledges Comunidad de Madrid for funding through the PIPF- 2023/ECO-30481 fellowship. We also acknowledge grants TED2021-131001A-I00 and CNS2022-135967 funded by MICIU/ AEI/10.13039/501100011033 and by the European Union “NextGenerationEU”/PRTR. We also acknowledge grant PID2022-142525OA-I00 funded by MICIU/AEI/10.13039/ 501100011033 and by FEDER, EU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Accurate and Fast Thermal Sensing via Phase-Responsive Nanothermometers and Neural Networks

  • París Ogáyar, Marina
  • Ming, Liyan
  • Zhang, Fengchan
  • Ximendes, Erving
  • Marin, Riccardo
  • Lifante-Pedrola, Ginés
  • Serrano Rubio, Aída
  • Espinosa, Ana
  • Haro-González, Patricia
  • Hernando, Jordi
  • Ruiz Molina, Daniel
  • Otaegui, Jaume R.
  • Roscini, Claudio
  • Jaque, Daniel
Accurate, rapid, and remote temperature sensing at the nanoscale is essential for applications ranging from monitoring cellular thermodynamics to thermal management of microelectronic devices. Luminescent nanothermometers are promising candidates; however, their deployment is hindered by limited thermal sensitivity and cross-sensitivity to environmental factors that mimic temperature-induced luminescence changes. We introduce fluorescent chromatic nanoswitchers (CNSs), comprising silica nanocapsules incorporating a fluorescent dye within a thermoresponsive matrix. The matrix undergoes a solid-to-liquid phase transition, yielding an exceptional fluorescence lifetime sensitivity of 19% °C-1 at 37 °C. Crucially, the lifetime-based thermal readout provided by CNSs is resistant to environmental interference, ensuring reliable, reproducible temperature measurements. To enhance CNS performance, we integrate artificial neural networks (ANNs) for advanced lifetime signal processing, enabling faster and robust thermal readouts. Proof-of-concept experiments show that the synergy between high-sensitivity lifetime-based nanothermometers and ANN-driven analysis paves the way for next-generation thermal sensing technologies, offering improved responsiveness, real-time capabilities, and enhanced accuracy., M.P.O. acknowledges the financial support from MICINN for an FPU (FPU20/03166). L.M. acknowledges a scholarship from the China Scholarship Council (202108350018). F.Z. acknowledges a scholarship from the China Scholarship Council (202108440235). E.X. thanks the Community of Madrid for Project SI4/PJI/2024-00130 through a direct grant with Universidad Autónoma de Madrid and also acknowledges support from Grant RYC2023-044309-I, funded by MICIU/AEI (10.13039/501100011033) and the FSE. This work was supported by Grant PID2024-161565OB-C21 funded by MICIU/AEI/10.13039/501100011033/FEDER, UE, and CNS2022-135495 and PID2023-151078OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. ICN2 is supported by the Severo Ochoa Centres of Excellence program, Grant CEX2021-001214-S, funded by MICIU/AEI/10.13039.501100011033. R.M. is grateful to the Spanish Ministerio de Ciencia, Innovación y Universidades for support to research through a Ramón y Cajal Fellowship (RYC2021-032913-I) and Project PID2022- 14210NA-I00 (NAMASTEPS) funded by MICIU/AEI/10.13039/5011000 11033 and by FEDER, EU. The ICMM-CSIC acknowledges support from the Severo Ochoa Centres of Excellence Program, Grant CEX2024-001445-S funded by MICIU/AEI/10.13039/501100011033. The UAB thanks the support from MICIU/AEI/10.13039.501100011033 (PID2022-141293OB-I00) and Generalitat de Catalunya (2021 SGR 00064 project). J.R.O. thanks the Generalitat de Catalunya (AGAUR) for his predoctoral FI fellowship. A.S. acknowledges financial support from Grant RYC2021-031236-I funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” and Project PID2021-124585NB-C33 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. A.E. acknowledges financial support from Project PID2024-161273OB-C21 funded by MCIN/AEI/10.13039/501100011033 and CNS2023-144689 funded by MCIN/AEI/10.13039/501100011033 and the “European Union NextGenerationEU/PRTR., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2024-001445-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of functionalization on axially substituted 2,7-pyrene covalent triazine frameworks for dual sensing applications

  • Borrallo-Aniceto, M. Carmen
  • Fuerte-Díez, Beatriz
  • Valverde-González, Antonio
  • González-Aguilera, Laura
  • Ferrer, M. Luisa
  • Lillo, M. Pilar
  • Díaz Morales, Urbano
  • Maya, Eva M.
  • Iglesias, Marta
13 pages, 11 figures, To advance the critical goal of selective pollutant detection for environmental remediation, we have developed two classes of covalent triazine frameworks (CTFs). The first incorporates a 2,7-pyrene moiety, resulting in a donor-acceptor CTF, while the second type has a donor-(π-spacer)-acceptor configuration through the integration of pyrene-aryl or pyrene-fluoroaryl-1,3,5-triazine units (2,7-arylPyr-CTFs). Additionally, a partially fluorinated CTF (CTFmix) was synthesized by co-polymerizing fluorinated and non-fluorinated dinitrile monomers. All CTFs were obtained via acid-catalyzed cyclotrimerization and thoroughly characterized using different spectroscopic and analytical techniques. Giving the high chemical stability, enhanced light-harvesting ability, and efficient charge separation and transfer properties of pyrene-based-CTFs, we have investigated the influence of functional groups, particularly fluorine, on their environmental analyte sensing. Our results show that these Pyrene-CTFs are effective fluorescent probes for the selective detection of picric acid (PA) and the pesticide dicloran (DCNA). Among then, the mixed fluorinated CTF, exhibited the highest sensitivity, achieving detection limits in the ppm range. Furthermore, this material showed high selectivity towards metal ions such as Au<sup>3+</sup> or Fe<sup>3+</sup>, with fluorescence recovery observed up to six cycles upon the addition of ascorbic acid., The authors acknowledge funding from the Spanish government through grants PID2023-146114NB-C22, PID2023-146114NB-C21, PID2021-123287OB-I00 and PID2021-123648OB-100 (all funded by MICIU/AEI /10.13039/501100011033, and from EU FEDER), and the Severo Ochoa Centres of Excellence program (Grant CEX2024-001445- S). M.P.L. acknowledges A. Guirao for TCSPC instrumental support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic hyperthermia in focus: emerging non-cancer applications of magnetic nanoparticles

  • Gavilán, Helena
  • Gallo-Cordova, Álvaro
  • Rábade-Chediak, Maura
  • Páez-Rodríguez, Amira
  • Morales, María Del Puerto
  • Gutiérrez, Lucía
This article is part of the themed collection: Recent Review Articles., Magnetic hyperthermia (MH), which leverages the ability of magnetic nanoparticles (MNPs), located in the tumor, to generate heat upon exposure to an alternating magnetic field (AMF), has long been synonymous with cancer therapy. However, recent advancements highlight emerging applications of MH beyond oncology, including neuromodulation, tissue engineering, biosensing, catalysis, and environmental remediation. All these applications intelligently harness the same principle to achieve a wide range of new functionalities in MNPs besides local heating, including drug release, eradication of pathogens, manipulation of cell membranes, mechanical responses for novel non-invasive therapies, boosting chemical reactions, intensifying processes and degrading or desorbing pollutants like CO<inf>2</inf>, just to name a few. This review provides a comprehensive overview of the latest breakthroughs in non-cancer applications of MH. While some fields, ranging from infection control and organ cryopreservation to nanorobotics in biomedicine, require non-toxic biocompatible and biodegradable MNPs (iron oxides) and AMFs restricted to radiofrequencies in the range of 100–300 kHz and an appropriate field intensity (few tens of kA m−1) to avoid tissue damage, some other areas, like sustainable catalysis, sensing, etc., open up the possibility of using diverse chemical elements besides iron (e.g., cobalt, nickel, carbon) mainly in the form of alloys, and AMFs of higher frequencies (well above 300 kHz) and amplitudes (well above 10–20 kA m−1). Indeed, engineering of MNPs with suitable catalytically active elements (gold, nickel, ruthenium, palladium, etc.), support materials (silica, aluminium/magnesium oxide, etc.) or surface coating with appropriate (bio)molecules (enzymes, RNA/DNA fragments, etc.) is crucial for each application, as well as considering the effect of local temperature (for instance, achieving the Curie temperature, T<inf>c</inf>, of the nanomaterial, provoking the de-swelling of polymers, activating/deactivating enzymes or boosting the efficiency of a catalytic process). Furthermore, this work discusses the current limitations and future directions required to expand the reach of MH. Finally, this review serves as a critical resource for researchers seeking to harness MH beyond cancer treatment and integrate it into novel scientific and technological frontiers. This journal is © 2025 The Royal Society of Chemistry, The authors would like to acknowledge funding from the “Plan de Recuperación, Transformación y Resiliencia” financed by the European Union–NextGenerationEU under H2umidity-Plus project; the Spanish Ministry of Science and Innovation through Project TED2021-130191B-C43, a Ramón y Cajal Research Fellowship (RYC2021-032448-I), and Project PID2023-150760NA-100; Project CNS2023-144321 funded by MICIU/AEI/10.13039/501100011033 and NextGenerationEU/PRTR; Fondo Social del Gobierno de Aragón (grupo DGA E15-23R); and the Severo Ochoa Centres of Excellence program through Grants CEX2023-001286-S and CEX2024-001445-S funded by MICIU/AEI/10.13039/501100011033. This publication is based upon work from COST Action CA23132 “MagneticParticle Imaging for next-generation theranostics and medical research” (NexMPI), supported by COST (European Cooperation in Science and Technology); and within the framework of the Una Europa Seed Funding Project DREAM-Nano (SF2405). A. P.-R. acknowledges funding from Beca Santander-Universidad de Zaragoza. Finally, the authors would like to thank the referees for their meticulous review, which contributed to improving this work., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2024-001445-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Room-Temperature Surface Exciton Polaritons in Colloidal J-Aggregate Flakes

  • Estévez-Varela, Carla
  • Gama, José N.
  • Castillo, Miguel
  • Miranda, Adelaide
  • De Beule, Pieter A.A.
  • Pérez-Juste, Jorge
  • López-García, Martín
  • Pastoriza-Santos, Isabel
  • Núñez-Sánchez, Sara
9 pages, 4 figures, J-aggregates are promising organic materials for nanophotonic applications due to their excitonic properties and ability to support surface exciton polaritons at room temperature, providing a robust platform for nanoscale light manipulation. Colloidal J-aggregate nanoparticles have demonstrated unique benefits such as easy integration into devices and combination with other materials, and enhanced surface-to-volume ratios. Herein, the one-step synthesis of colloidal J-aggregate flakes is reported in water based on electrostatic interaction of cyanine molecules (TDBC) and oppositely charged polyelectrolytes (polydiallyldimethylammonium chloride, PDDA). These flakes exhibit colloidal stability maintaining the J-aggregate conformation even in solvents that favoured their monomeric state. The characterization of the colloidal J-aggregate flakes reveals no significant monomer contribution and, more importantly, their capability to support surface exciton polaritons at room temperature (for first time). This is further confirmed at single-particle level by observing an angular-independent Reststrahlen band near the excitonic resonance. In addition, the colloidal flakes exhibit a strong scattering component that broadens the extinction band and redshifts the photoluminescence, indicating that the colloidal architecture influences the optical response. These findings introduce a versatile colloidal system, extendable to other cyanine dyes, for constructing excitonic nanostructures tailored for advanced photonic applications., This work was supported by Grant TED2021-130522B-I00 funded byMCIN/AEI /10.13039/501100011033 and NextGenerationEU/ PRTR –BDNS 598843 – CATARSIS and the European Union under Grant Agreement #101129661-ADAPTATION. M.L.-G. thanks to the Grant CNS2023-145364 funded by MICIU/AEI/10.13039/501100011033 and by “EuropeanUnion NextGenerationEU/PRTR”. C.E.-V. acknowledges an FPI Fellowshipfrom MCIN/AEI/10.13039/501100011033 (Grant No. PRE2020-096163).S.N.-S. acknowledges the Severo Ochoa Centres of Excellence programthrough Grant CEX2024-001445-S. Funding for open access was providedby Universidade de Vigo/CISUG., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polarization-Resolved Speckle Technique for Rapid Non-Destructive Characterization of Macroporous Silica Thin Films

  • Lozano, Yaiza
  • Levy, David
  • Salazar Bloise, Félix
This article belongs to the Special Issue Advances in Optical Sensing, Instrumentation and Systems: 2nd Edition., Macroporous silica thin films were synthesized via the sol–gel method to elucidate the relationship between pore structure and the degree of polarization of light (DoP). The films were characterized by scanning electron microscopy (SEM) to determine their mean pore size and surface porosity, while polarization-resolved speckle imaging was employed to evaluate the degree of polarization and its distribution on the Poincaré sphere. The results show that surface porosity is a key structural parameter governing the DoP, with increasing values leading to enhanced scattering and a progressive isotropization of the polarization-state distributions. Poincaré sphere mapping further reveals distinct scattering regimes and polarization-conversion pathways, providing insights that are not accessible with conventional optical measurements. Overall, these findings show that speckle imaging is a rapid, cost-effective, and non-destructive approach to probing structural and optical anisotropies in porous materials, with direct relevance to systems where pore accessibility dictates performance, including liquid-crystal devices, photochromic coatings, and other nanostructured photonic platforms., This work was partially supported by the Universidad Politécnica de Madrid (UPM) under project RP24 06480 143., We thank the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S, funded by MICIU/AEI/10.13039/50110001103. MICIU (Ministerio de Ciencia, Innovación y Universidades) Project PIE-CSIC 202060E257, and the Universidad Politécnica de Madrid (UPM) for the support in the research carried out. We are also indebted to the reviewers of this article for their corrections and constructive criticism., With funding form the Spanish government through the "Severa Ochoa Centre of Excellence" accreditation (CEX2024-001445-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fluxoid solitons in superconducting tapered tubes and bottlenecks

  • Kokkeler, Tim
  • Uldemolins, Mateo
  • Lobo, Francisco
  • Bergeret, F. Sebastian
  • Prada, Elsa
  • San-José, Pablo
A thin-walled tubular superconductor develops a quantized fluxoid in the presence of an axial magnetic field. The fluxoid corresponds to the number of phase windings of the superconducting order parameter and is topological in nature. When the tube has a radius variation along the axial direction, forming a bottleneck structure between sections with different radius, a fluxoid mismatch can appear depending on the applied magnetic field. The bottleneck then becomes a topological boundary and is host to topologically protected solutions for the order parameter, dubbed fluxoid solitons, that are free to move around bottlenecks with cylindrical symmetry. Fluxoid solitons are a new type of vortex with nonquantized flux, loosely related to Pearl vortices in thin superconducting films, and fluxons in Corbino Josephson junctions. We characterize their properties as a function of system parameters using the self-consistent quasiclassical theory of diffusive superconductors. We consider both short bottleneck structures and long tapered tubes, where multiple trapped fluxoid solitons adopt elaborate arrangements dictated by their mutual repulsion., This research was supported by Grants No. PID2021-122769NB-I00, No. PID2021-125343NB-I00, No. PID2024-161665NB-I00, No. PID2023-148225NB-C31, and No. TED2021-130292B-C42 funded by MICIU/AEI/10.13039/501100011033, “ERDF A way of making Europe,” and “ESF+.” P. S.-J., E. P., and F. L. acknowledge the Severo Ochoa Centres of Excellence program through Grant No. CEX2024-001445-S, and the CSIC’s Quantum Technologies Platform (QTEP). T. K. acknowledges support from the Research Council of Finland through DYNCOR, Project No. 354735, and through the Finnish Quantum Flagship, Project No. 359240. M. U. acknowledges funding by the European Union NextGenerationEU/PRTR-C17.I1 and the Department of Education of the Basque Government (IKUR Strategy). F. S. B. acknowledges financial support from the European Union’s Horizon Europe research and innovation program under Grant Agreement No. 101130224 (JOSEPHINE)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2024-001445-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Excess Properties of Aqueous Dilutions of Ammonium- and Phosphonium-Based Deep Eutectic Solvents

  • Zhou, Xusheng
  • Zhang, Wenjia
  • Cerro Carracedo, Manuel
  • Jiménez-Riobóo, Rafael J.
  • Ferrer, M. Luisa
  • Gutiérrez, María C.
  • Monte, Francisco del
Published as part of Journal of Chemical & Engineering Data special issue “Deep Eutectic Solvents─New Data for Properties and Applications”., This work focused first on the measurement at 25 °C and ambient pressure of the thermal conductivities (k), thermal diffusivities (α), and heat capacities (Cp) of aqueous dilutions of two deep eutectic solvents (DESs). The first one composed of choline chloride (ChCl) and urea (U) in a 1:2 molar ratio (ChCl:2U), and the second one composed of methyltriphenylphosphoniumbromide (M3PhPBr) and glycerol (Gly) in a 1:3 molar ratio (M3PhPBr:3Gly). Then, we compared the deviation from ideality of the thermal conductivity (Δk) with those experienced by other excess properties, including excess molar volume (VE), excess viscosity (ln ηE), and excess adiabatic compressibility (ΔβS). The aim was finding some correlation among them in the sign of the deviation and/or the specific DES content at which the maximum deviation from ideality is reached. Moreover, we have compared the hypersonic velocities (νH) obtained from Brillouin spectroscopy with regular ultrasonic velocities (νU) to identify the DES content for which, in terms of relaxation, the mixture moves from a purely dissipative fluid to an “elastic medium”. Finally, we also investigated whether 1H NMR spectroscopy could also be used to identify the DES content for which the deviation of ideality was the maximum., This work was supported by MCIN/AEI/10.13039/501100011033 (PID2021-123648OB-I00, PID2024-161273OB-C21, and PID2024-155161OB-I00) and by “ERDF A way of making Europe” (PID2021-123648OB-I00). The authors also acknowledge the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S, funded by MICIU/AEI/10.13039/501100011033. X.Z. and W.Z. acknowledge the China Scholarship Council for a Ph.D. research fellowship (CSC No. 202306030065 and 202208420019, respectively). M.L.F. also thanks the University of Galway for her appointment as Adjunct Lecturer. The Servicio Interdepartamental de Investigación (SIdI) of the Universidad Autónoma de Madrid, the Thermal Analysis Unit of the Instituto de Ciencia de Materiales (ICMM), and the Scientific and Technical Service of the Instituto de Cerámica y Vidrio (ICV) are acknowledged for helpful assistance with NMR, FTIR, heat capacity, and thermal conductivity measurements., The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.jced.6c00067. Values of the density, viscosity, ultrasonic and hypersonic velocity, adiabatic compressibility, 1H NMR chemical shifts, and 1H NMR spectra (PDF), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Building an affordable self-driving lab: Practical machine learning experiments for physics education using Internet-of-Things

  • Liu, Y.
  • Lei, Q.
  • He, X.
  • Xue, Y.
  • He, K.
  • Yang, H.
  • Wang, Y.
  • Zhang, X.
  • Yang, L.
  • Zhou, Y.
  • Hu, R.
  • Xie, Yong
Note: This paper is part of the Special Topic on Machine Learning for Self-Driving Laboratories, Machine learning (ML) is transforming modern physics research, but practical, hands-on experience with ML techniques remains limited due to cost and complexity barriers. To address this gap, we introduce an affordable, autonomous, Internet-of-Things (IoT)-enabled experimental platform designed specifically for applied physics education. Utilizing an Arduino microcontroller, a customizable multi-wavelength light emitting diode array, and photosensors, our setup generates diverse, real-time optical datasets ideal for training and evaluating foundational ML algorithms, including traversal methods, Bayesian inference, and deep learning. The platform facilitates a closed-loop, self-driving experimental workflow, encompassing automated data collection, preprocessing, model training, and validation. Through systematic performance comparisons, we demonstrate the superior ability of deep learning to capture complex nonlinear relationships compared to traversal and Bayesian methods. At ∼$60, this open-source IoT platform provides an accessible, practical pathway for students to master advanced ML concepts, promoting deeper conceptual insights and essential technical skills required for the next generation of physicists and engineers. © 2025 Author(s)., This study received funding from the National Natural Science Foundation of China (NSFC) (Grant Nos. 62011530438 and 61704129). This study was partially supported by the Fundamental Research Funds for the Central Universities (Grant No. QTZX23026), the fund of the State Key Laboratory of Solidification Processing in Northwestern Polytechnical University (Grant No. SKLSP201612), and the Open Fund of the State Key Laboratory of Infrared Physics (Grant No. SITP-NLIST-ZD-2024- 01). Y.X. acknowledges the European Research Council through the ERC-2024-PoC StEnSo (Grant Agreement No. 101185235) and the ERC-2024-SyG SKIN2DTRONICS (Grant Agreement No. 101167218). We would also like to acknowledge the Severo Ochoa Centers of Excellence program through Grant No. CEX2024-001445- S. This work was also supported by the 2024 Textbook Development Grant of Xidian University (Project No. AJA2412). The authors also acknowledge Dr. Eduardo R. Hernandez (ICMM, CSIC) and Dr. Andres Castellanos-Gomez (ICMM, CSIC) for the careful reading of the paper., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strain control of the electronic structure in WS2homobilayers with 0° and 60° stacking angles

  • Jadriško, V.
  • Landa-Garcia, I.
  • Novko, D.
  • Radatović, B.
  • Lei, Q.
  • Vujičić, N.
  • Gadermaier, C.
  • Castellanos-Gómez, Andrés
  • Xie, Yong
Two-dimensional transition metal dichalcogenides combine attractive semiconductor properties with exceptionally strong light–matter interaction. Their mechanical robustness allows the modulation of their optical and electronic functionalities via strain. Bilayers introduce the stacking angle as an additional parameter, whose role in the strain response is still elusive. Here, we combine differential reflectance spectroscopy and density functional theory calculations to explore the strain response of WS2 homobilayers with 0° and 60° stacking angles. The change of the excitonic resonance energies and linewidths depends on the stacking angle, highlighting the scope for the manipulation of the electronic structure of two-dimensional semiconductors via the synergistic harnessing of the strain and angle control parameters. This journal is © The Royal Society of Chemistry, 2026, This work received funding from the European Union's Horizon 2020 research and innovation program under grant agreement 956813 (2Exciting). D. N. and N. V. acknowledge support by the Centre of Excellence for Advanced Materials and Sensing Devices (Grant No. KK.01.1.1.01.0001) and Centre for Advanced Laser Techniques (Grant No. KK.01.1.1.05.0001) co-financed by the Croatian Government and the European Union through the European Regional Development Fund – Competitiveness and Cohesion Operational Program. A.C-G. acknowledges support from Grants PDC2023-145920-I00 and PID2023-151946OB-I00, funded by MICIU/AEI/10.13039/501100011033 and, respectively, by the European Union NextGenerationEU/PRTR (PDC2023-145920-I00) and by ERDF/EU (PID2023-151946OB-I00). A.C-G. also acknowledges funding from the European Research Council (ERC) through the ERC-PoC 2024 StEnSo project (grant agreement 101185235). ICMM-CSIC authors acknowledges support from the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S, funded by MICIU/AEI/10.13039/501100011033. This work was supported by the Open Fund of State Key Laboratory of Infrared Physics (Grant No. SITP-NLIST-ZD-2024-01). I. L.-G., V. J. and C. G. acknowledge support by the PRIN 2020 project Conquest funded by the Italian Ministry of University and Research (Prot. 2020JZ5N9M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strain Engineering of Correlated Charge-Ordered Phases in 1T-TaS2

  • Luque-Merino, Rafael
  • Carrascoso Plana, Félix
  • Henríquez-Guerra, E.
  • Calvo, M.R.
  • Frisenda, R.
  • Castellanos-Gómez, Andrés
Strain engineering is a powerful strategy for controlling the structural and electronic properties of two-dimensional materials, particularly in systems hosting charge density wave (CDW) order. In this work, we apply uniaxial tensile and compressive strain to thin 1T-TaS2flakes using a flexible, device-compatible platform and systematically investigate the strain-dependent behavior of the nearly commensurate (NC) to incommensurate (IC) CDW phase transition. This transition is driven by Joule heating at room temperature. Electrical transport measurements reveal that both the switching threshold voltage and the resistance of the NC-CDW phase exhibit clear, reversible strain dependence. Furthermore, we identify a quadratic dependence between the strain-induced resistance change and the threshold voltage, confirming that piezoresistive modulation governs the strain tunability of the phase transition. We demonstrate a room-temperature, electrical readout strain and displacement sensor with a threshold-like response in a programmable window. These results highlight the potential of 1T-TaS2for on-chip sensing of strain and displacement. © 2025 The Authors. Published by American Chemical Society, A.C.-G. acknowledges funding by the Ministry of Science and Innovation (Spain) through Projects PDC2023-145920-I00 and PID2023-151946OB-I00 and the European Research Council through the ERC-2024-PoC StEnSo (Grant Agreement 101185235) and the ERC-2024-SyG SKIN2DTRONICS. R.L.M. and A.C.-G. acknowledge the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S. M.R.C. acknowledges funding from PID2023-146354NB-C44 (funded by MICIU/AEI/10.13039/501100011033) and from EU FEDER. M.R.C. and E.H.-G. acknowledge CNS2023-145151 (funded by MICIU/AEI/10.13039/501100011033 and EU NextGenerationEU/PRTR). R.F. acknowledges funding from Ministero dell’Università e della Ricerca (MUR) through the PRIN Grant 2D-PentaSensing (P2022HT3FF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rough Fabry–Perot cavity: a vastly multi-scale numerical problem

  • Slipchenko, Tetiana
  • Abad-Arredondo, J.
  • Consoli, A.
  • García Vidal, F.J.
  • Fernández-Domínguez, A.I.
  • García Fernández, Pedro David
  • López, Cefe
A commercial Fabry–Perot laser diode is characterized by highly disproportionate dimensions, which poses a significant numerical challenge, even for state-of-the-art tools. This challenge is exacerbated when one of the cavity mirrors is roughened, as is the case when fabricating random laser diodes. Such a system involves length scales from several hundred micrometres (length) to a few nanometres (roughness) all of which are relevant when studying optical properties in the visible. While involving an extreme range of dimensions, these cavities cannot be treated through statistical approaches such as those used with self-similar fractal structures known to show well-studied properties. Here we deploy numerical methods to compute cavity modes and show how random corrugations of the Fabry–Perot cavity wall affect statistical proper-ties of their spectral features. Our study constitutes a necessary first step in developing technologically essential devices for photonic computation and efficient speckle-free illumination. © 2025 the author(s), published by De Gruyter, Berlin/Boston., This work has received funding from MICIU Grants Ref. PID2021-124814NB-C21, PID2021-126964OB-I00, PID2021-127968NB-I00, and PDC2022-133418-I00. TS, AC, PDG, and CL acknowledge support from the Spanish MICIU Severo Ochoa program for Centres of Excellence through grant CEX2024-001445-S. JBA, FJGV and AIFD acknowledge funding from the María de Maeztu program for Units of Excellence in R&D through grant CEX2023-001316-M., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fast prototyping of memristors for ReRAMs and neuromorphic computing

  • Marraccini, G.
  • Strangio, S.
  • Dimaggio, E.
  • Sargeni, R.
  • Pieri, F.
  • Sozen, Yigit
  • Castellanos-Gómez, Andrés
  • Fiori, G.
The growing demand for energy-efficient computing in artificial intelligence requires novel memory technologies capable of storing and processing information. Memristors stand out in thanks to their ability to store information, mimic synaptic behavior and support in-memory computing architectures while requiring minimal active areas and energy consumptions. Here is presented a scalable and cost-effective approach to fabricate Ag/MoS2/Au memristors as resistive switching memory devices by combining roll-to-roll mechanical exfoliation of two-dimensional materials with inkjet printing. These devices exhibit reliable non-volatile switching behavior attributed to the formation and dissolution of metallic conductive filaments within the MoS2 layer, with high resistance ratios and robust retention times. A fully-connected neural networks is simulated using quantized weights mapped onto a virtual memristor crossbar array demonstrating that classification tasks can be performed with high accuracy even with limited bit-width precision, highlighting the potential of these devices for energy-efficient, high-throughput AI hardware. This journal is © The Royal Society of Chemistry, 2026, Authors gratefully acknowledge financial support from the ERC SKIN2DTRONICS (Contract Number 101167218) and the ENERGIZE (Contract Number 101194458) projects. Authors gratefully acknowledge also the Italian Ministry of Education and Research (MIUR) in the framework of the FoReLab project (Departments of Excellence) and the Piano Nazionale di Ricerca e Resilienza - PNRR (CN00000013). This work was also funded by the Ministry of Science and Innovation (Spain) through the projects (PDC2023-145920-I00 and PID2023-151946OB-I00) and the Severo Ochoa Centres of Excellence Program through Grant CEX2024-001445-S and the European Research Council through the ERC-2024-PoC StEnSo (grant agreement 101185235). The graphical abstract and Fig. 1, 2, and 4 were created, in part, with Blender via Blender Foundation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advanced mullite ceramics from cost-effective kaolin

  • Gallego, Antolino
  • Tarancón, Sandra
  • Pastor, J. Y.
  • López-Esteban, Sonia
  • Menéndez, José Luis
  • Torrecillas, Ramón
  • Bartolomé, Jose F.
  • Moya, J. S.
  • Fernández, Agustín F.
This study presents a wet processing route for the production of dense mullite ceramics intended for advanced, high-value-added applications, using kaolin -a low-cost raw material-. An aqueous suspension milling system that combined both dispersion and attrition milling enabled the production of homogeneous mixtures of kaolin and alumina at the individual particle level. This processing route demonstrated good reproducibility under the processing conditions investigated in this study. The resulting dense mullite compacts achieved relative densities in the range of 94–96%, depending on the drying route. A mechanical study was conducted at 25 °C, 800 °C, and 1100 °C, which showed flexural strengths at room temperature of 205–238 MPa and values increasing to approximately 300 MPa at 1100 °C, thus remaining competitive with the values reported for commercial high-purity synthetic mullite powders. Furthermore, the permittivity and loss tangent values were similar to those obtained for pure mullite (εr = 8.4, tan δ = 4×10−4, respectively). These results open up the possibility of using these materials as electrical components. Therefore, the proposed low-cost processing route reveals a wide range of applications for mullite compacts in many processes that require operation in an oxidizing atmosphere in the range of 25 °C to 1100 °C., Authors acknowledge the financial support received from Principado de Asturias (SEKUENS-FICYT) through project IDE/2024/000637. Likewise, acknowledgement for the financial support from the Spanish Ministry of Science and Innovation (MICINN) and the Spanish State Research Agency (AEI), through Grant CEX2024-001445-S under the Severo Ochoa Centres of Excellence Programme., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2024-001445-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comprehensive characterization of high-quality hexagonal boron nitride ultra-thin films grown by scalable ion beam assisted deposition

  • Azpeitia, Jon
  • Gago, Raul
  • Esteban, David
  • Santoro, Gonzalo
  • García-Hernández, Mar
  • Jiménez, Ignacio
9 pages, 4 figures, Hexagonal boron nitride (h-BN) is a key material for 2D heterostructures and electronic devices. It has been widely employed as encapsulant, dielectric barrier and, mainly, as a substrate for graphene since it significantly enhances its electronic properties and in particular the mobility of the charge carriers. However, these advances are to a great extent restricted to laboratory-scale experiments due to the limited scalability of current h-BN growth methods. In this work, we present an in-depth study of h-BN thin films grown by ion beam assisted deposition (IBAD), a versatile and scalable technique that enables the synthesis of high-quality ultra-flat layers with tunable thickness on metallic, semiconducting, or insulating substrates. Comprehensive structural, optical, and morphological characterization of the h-BN films was performed using complementary spectroscopic and advanced microscopy techniques. Our results reveal the growth of highly in-plane textured nanocrystalline h-BN layers exhibiting very low defect density and ultraflat surfaces with a wide bandgap around 5.35 eV. These findings make IBAD a promising method for the scalable growth of highly performing h-BN thin films for integration as substrates in graphene-based devices., The authors Acknowledge the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S, the financial support from PID2023-149077OB-C31 funded by MCIN/AEI/10.13039/50110001103, and from TEC-2024/TEC-459 funded by Comunidad Autónoma de Madrid., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A self-assembled two-dimensional hypersonic phononic insulator

  • Moronta, Pedro
  • Sathyan, Sandeep
  • Cardozo de Oliveira, Edson R.
  • Jiménez-Riobóo, Rafael J.
  • Lanzillotti-Kimura, Norberto Daniel
  • García Fernández, Pedro David
  • López, Cefe
The coupling between the electromagnetic field and the motional degrees of freedom of a nanoscale object offers an interesting control-knob for light–matter interaction. However, this interaction is rather weak so, in general, a precise control over the mechanical vibrations of the object becomes desirable for enhancing and fine-tuning this coupling. Phonon insulation is a base-line to achieve nanoscale vibration control by inducing constructive and destructive phonon interference, which opens phononic band gaps at various frequencies. Phonon insulators are essential for managing and directing mechanical vibrations in advanced mechanical systems, such as resonators and acousto-optic modulators. Conventional fabrication methods, such as electron-beam lithography, are highly robust and efficient but also very demanding and limited in accessibility due to their cost and technical requirements. Self-assembly offers an alternative route for fabricating mechanical structures from diverse materials, allowing for innovative designs with improved functionalities. By using natural self-organizing processes, production is simplified and accelerated, with components assembling automatically in a low-cost, scalable manner. Here, we present a simple self-assembled device that functions as a phonon insulator in the GHz frequency range and can be easily integrated onto silicon. This integration opens the door to a wide range of applications, including optical communication, quantum computing, and ultra-sensitive sensors, where efficient control over mechanical vibrations is vital., This work has received funding from Grant Ref. PID2021-124814NB-C21 and PID2021-127033OB-C21 funded by MCIN/AEI/10.13039/501100011033 and the European Union and Ministerio de Asuntos Económicos y Transformación Digital, Gobierno de España (CSIC13-4E-1794) and Dirección General de Universidades e Investigación (S2018/NMT-4291). SS, ECDO, and NDLK acknowledge funding by the European Research Council Consolidator Grant No. 101045089 (T-Recs). PM, RJJ, PDG, and CL acknowledge support from the Spanish MICIU Severo Ochoa program for Centres of Excellence through Grant CEX2024-001445-S. PM acknowledges FPI grant PRE2019-091452. We acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE)., With funding form the Spanish government through the "Severa Ochoa Centre of Excellence" accreditation (CEX2024-001445-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effects of Elevated Temperatures and Catalyst Layer Morphology on the Carbon Balance during Electrochemical CO Reduction

  • Rossen, A.
  • Daems, N.
  • Choukroun, D.
  • Tajuelo-Castilla, G.
  • Santoro, Gonzalo
  • Martín-Gago, José A.
  • Breugelmans, T.
9 pages, 5 figures, 1 table, The electrochemical reduction of carbon monoxide (CORR) offers a promising opportunity to convert renewable electricity into value-added C2+ chemicals, such as ethylene, ethanol, and acetate. While scaled electrolyzer systems are expected to operate at elevated temperatures, the impact of temperature on crossover during CORR remains underexplored. In this study, we systematically evaluate the influence of temperature (25–85 °C) on the CORR using various copper-based catalyst layers, cell configurations (flow-by and anion exchange zero-gap membrane cell), and processing conditions (anolyte concentration, current density, and temperature). At low current density (−50 mA cm–2), product selectivity is found to be insensitive to temperature across the full investigated range. In addition, elevated temperatures significantly suppress the crossover of liquid products to the anolyte, thus, improving the net carbon efficiency. At higher current densities, conventional sputtered Cu electrodes suffer from severe flooding and CO starvation, limiting performance and selectivity. To address this, spray-coated Cu/PTFE electrodes are introduced, combining porosity and hydrophobicity to stabilize performance. These electrodes enable study of the CORR at current densities and temperatures of up to 400 mA cm–2 and 85 °C, respectively. Overall, the study shows that the temperature primarily affects product transport rather than reaction pathways. Understanding thermal effects is critical for guiding the design of CORR systems capable of efficient, stable operation under thermally and industrially realistic conditions., D.C. and N.D. acknowledge financial support from NFFA-NEP European Union’s Horizon 2020 research and innovation program under grant agreement No. 101007417, proposal ID 472. A.R. was financially supported through a PhD fellowship for strategic basic research (grant Nos. 1S37222N and 1S37224N). This work was cofunded by the Flanders Industry Innovation Moonshot program for the action CLUE HBC.2021.0586 and the FWO (SBO grant number S005226N eSAF project). J.Á .M.-G., G.S., and G.T.-C. acknowledge funding through the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S and the national plan PID2023-149077OB-C31.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Amphotericin B intercalated in layered clays as effective antifungal systems against eumycetoma causative agents

  • Misol, Alexander
  • Sáez, Esther
  • Colom, María Francisca
  • Darder, Margarita
  • Aranda, Pilar
Eumycetoma and other subcutaneous mycosis are severe chronic infections with a high incidence in tropical and subtropical regions, whose current treatment has a low curation rate. In the search for more effective and affordable therapies, hybrid materials based on amphotericin B (AmB), an antifungal drug with a broad spectrum of action, appear promising for localized treatment at the site of infection. In this context, the immobilization of AmB in suitable nanocarriers would be helpful to minimize its adverse side effects and ensure a controlled release over time. For this purpose, montmorillonite (MMT), showing cation exchange capacity, and layered double hydroxides (LDH), with anion exchange capacity, are explored as possible supports, taking advantage of the amphoteric character of AmB. X-ray diffraction (XRD) confirms the intercalation of AmB in both the MMT-based and LDH-based hybrids. The protective effect of the inorganic layers on the encapsulated AmB avoiding its oxidation and agglomeration is also proven. A release study from the different supports is carried out in simulated wound fluid (SWF) and in Sabouraud Dextrose Broth (SDB) growth medium, showing a sustained release for at least 60 days. Furthermore, in vitro tests were carried out against two causative agents of eumycetoma, Aspergillus flavus and Subramaniula thielavioides species. These results confirmed the capacity of the two layered hybrids to inhibit the growth of both fungal strains, with the LDH-based hybrid showing a stronger growth inhibition effect on A. flavus., The authors acknowledge the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S and the Agencia Estatal de Investigación, MCIN/AEI/10.13039/501100011033 (Spain, projects PID2019-105479RB-I00 and PID2022-137889OB-I00) and “ERDF A way of making Europe” (EU, project PID2022-137889OB-I00), as well as partial financial support by a grant for research projects linked to international development cooperation UMH-GVA (Spain), reference SOLCIF 2022/0005 (COD. 11-134-4-2023-0133)., With funding form the Spanish government through the "Severa Ochoa Centre of Excellence" accreditation (CEX2024-001445-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Application of the Pontryagin maximum principle to the robust time-optimal control of two-level quantum systems

  • Fresse-Colson, O.
  • Guérin, S.
  • Chen, Xi
  • Sugny, D.
We study the time-optimal robust control of a two-level quantum system subjected to field inhomogeneities. We apply the Pontryagin maximum principle and we introduce a reduced space onto which the optimal dynamics is projected down. This reduction leads to a complete analytical derivation of the optimal solution in terms of elliptic functions and elliptic integrals. Necessary optimality conditions are then obtained for the original system. These conditions are verified numerically and lead to the optimal control protocol. Various examples, ranging from state-to-state transfer to the generation of a NOT gate, illustrate this study. The connection with other geometric optimization approaches that have been used to solve this problem is also discussed. Finally, we show how this method can be combined with numerical optimization algorithms to design robust control for higher-dimensional quantum systems, as illustrated by a Bose-Einstein condensate in an optical lattice., This research has been supported by the ANR Project “QuCoBEC” No. ANR-22-CE47-0008-02 and by the ANRDFG “CoRoMo” Projects No. 505622963/KO 2301/15-1 and No. ANR-22-CE92-0077-01. We also acknowledge the support of the CNRS projects QUSPIDE and CONV, and by the EUR EIPHI project “SQC.” X.C. acknowledges the project grant PID2021-126273NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” and “ERDF Invest in your Future”, the Spanish Ministry of Economic Affairs and Digital Transformation through the QUANTUM ENIA project call-Quantum Spain project, and the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S., With funding form the Spanish government through the "Severa Ochoa Centre of Excellence" accreditation (CEX2024-001445-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Characterizing local Majorana properties using Andreev states

  • Alvarado, Miguel
  • Yeyati, Alfredo Levy
  • Aguado, Ramón
  • Seoane Souto, Rubén
We propose using Andreev bound states (ABS) as spectroscopic probes to characterize Majorana zero modes (MZMs) in quantum dot-based minimal Kitaev chains. Specifically, we show that tunneling conductance measurements with a superconducting probe hosting an ABS reveal four subgap peaks whose voltage positions and relative heights enable extraction of the MZM energy splitting and Bogoliubov-de Gennes coherence factors. This provides direct access to zero-splitting regimes and to the local Majorana polarization—a measure of the Majorana character. The method is compatible with existing experimental architectures and remains robust in extended chains., Work supported by the Horizon Europe Framework Program of the European Commission through the European Innovation Council Pathfinder Grant No. 101115315 (QuKiT), the Spanish Comunidad de Madrid (CM) “Talento Program” (Project No. 2022-T1/IND-24070), the Spanish Ministry of Science, Innovation, and Universities through Grants No. CEX2024-001445-S (Severo Ochoa Centres of Excellence program), No. PID2022-140552NA-I00, No. PID2021-125343NB-I00, and No. TED2021-130292B-C43, funded by MCIN/AEI/10.13039/501100011033, “ERDF A way of making Europe” and European Union Next Generation EU/PRTR. Support from the CSIC Interdisciplinary Thematic Platform ( PTI+) on Quantum Technologies ( PTI −QTEP+) is also acknowledged., With funding form the Spanish government through the "Severa Ochoa Centre of Excellence" accreditation (CEX2024-001445-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Demonstration of hardware efficient photonic variational quantum algorithm

  • Agresti, Iris
  • Paul, K.
  • Schiansky, Peter
  • Steiner, Simon
  • Yin, Zhenghao
  • Pentangelo, Ciro
  • Piacentini, Simone
  • Crespi, Andrea
  • Ban, Yue
  • Ceccarelli, Francesco
  • Osellame, Roberto
  • Chen, Xi
  • Walther, Philip
Quantum computing has changed the paradigm of computer science, where quantum technologies have promised to outperform classical ones. Such an advantage was only demonstrated for tasks with no application or out of reach for the state-of-the-art quantum technologies. In this context, a promising strategy to find practical use of quantum computers exploits hybrid models, where a quantum device estimates a hard-to-compute quantity, while a classical optimizer trains the parameters. In this work, we demonstrate that single photons and linear optical networks are sufficient for implementing variational quantum algorithms, when the problem specification (ansatz) is tailored to this specific platform. We show this by a proof-of-principle demonstration to tackle an instance of a factorization task, whose solution is encoded in the ground state of a suitable Hamiltonian. This work, which combines Variational Quantum Algorithms with hardware efficient ansätze for linear optics, showcases a promising pathway toward practical applications for photonic quantum platforms., This research was cofunded by the European Union (HORIZON Europe Research and Innovation Programme, EPIQUE, No. 101135288). This project has received funding from the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No. 899368 (EPIQUS), under the Marie Skłodowska-Curie Grant Agreement No. 956071 (AppQInfo), and under Grant Agreement No. 101017733 (QuantERA II). This research was funded in whole or in part by the Austrian Science Fund (FWF) [10.55776/ESP205 (PREQUrSOR), 10.55776/I6002 and 10.55776/F71 (BeyondC)]. The financial support by the Austrian Federal Ministry of Labour and Economy, the National Foundation for Research, Technology and Development, and the Christian Doppler Research Association is gratefully acknowledged. Y.B. acknowledges the Ayudas para contratos Ramón y Cajal (RYC2023-042699-I). X.C. and Y.B. acknowledge the Severo Ochoa Centres of Excellence program through Grant No. CEX2024-001445-S. K.P. and X.C. also appreciate the funding from the Basque Government through Grant No. IT1470-22, the project Grant No. PID2021-126273NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” and “ERDF Invest in your Future,” and the Spanish Ministry of Economic Affairs and Digital Transformation through the QUANTUM ENIA project call-Quantum Spain project., With funding form the Spanish government through the "Severa Ochoa Centre of Excellence" accreditation (CEX2024-001445-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Different configurations of carbon electrochemical sensors based on diamond nanoparticles for the simultaneous detection of phenolic compounds

  • Blanco, Elías
  • Vázquez, Luis
  • Pozo, María del
  • Da Silva, Maria Pilar
  • Quintana, Carmen
  • Casero, Elena
  • Petit-Domínguez, María Dolores
In this work, we report the development of two different configurations of electrochemical carbon-based sensors for the simultaneous determination of phenolic compounds, namely hydroquinone, catechol, and resorcinol, which are harmful to human health and commonly found in the environment as a result of industrial discharges. In a first approach, we used diamond nanoparticles (DNPs) to modify the surface of a glassy carbon electrode to take advantage of their catalytic properties together with their electrical conductivity, high surface area and chemical stability. In a second approach, we extrapolated the developed electrochemical sensor to a low-cost device based on a carbon paper electrode modified with diamond nanoparticles. The aim of assaying this second configuration is to test whether it is possible to carry out the simultaneous determination of these phenols employing this flexible and low-cost substrate. Both configurations were morphologically characterized by scanning electron microscopy and atomic force microscopy. We have evaluated by cyclic voltammetry the responses of the glassy carbon and carbon paper electrodes in their bare or diamond nanoparticles-modified forms. The presence of diamond nanoparticles improves the sensitivity and peak separation, enabling the resolution of the three peaks. The overlapping of DNP surface unsaturated bond orbitals, which leads to the formation of discrete electronic states within the diamond's band gap, explains the conductivity and electrocatalytic properties of this nanomaterial. Its presence on the electrode also increases the surface area available for detection. Using the differential pulse voltammetry technique, we have obtained detection and quantification limits in the range of 1.8–8.5 μM and 6.0–28 μM, respectively, with wide linear concentration ranges. Furthermore, reproducibility (expressed as RSD) was between 4.8 % and 7.0 % and accuracy values, in terms of relative error, were below 8.0 %. Furthermore, the DNP-modified carbon paper sensor exhibits higher sensitivity than the glassy carbon-based sensor. To assess the electrochemical sensor applicability, a real river water sample was analysed, yielding recovery percentages between 90 % and 110 %., The authors acknowledge financial support from the projects PID2023-149077OB-C31, PID2023-149077OB-C32 and the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S funded by MCIN/AEI/10.13039/501100011033., With funding form the Spanish government through the "Severa Ochoa Centre of Excellence" accreditation (CEX2024-001445-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Digitized counterdiabatic quantum optimization for bin packing problem

  • Xu, Ruoqian
  • Romero, Sebastián V.
  • Tang, Jialiang
  • Ban, Yue
  • Chen, Xi
The bin packing problem (BPP), a classical NP-hard combinatorial optimization challenge, has emerged as a promising application for quantum computing. In this work, we tackle the one-dimensional BPP (1dBPP) using a digitized counterdiabatic quantum approximate optimization algorithm (DC-QAOA) that incorporates counterdiabatic (CD) driving to achieve a 40% higher feasibility ratio than standard QAOA, while reducing quantum resource requirements. We investigate three ansatz schemes -DC-QAOA, CD-inspired ansatz, and CD-mixer ansatz - each integrating CD terms with distinct combinations of cost and mixer Hamiltonians, resulting in different DC-QAOA variants. Numerical simulations demonstrate that these DC-QAOA variants maintain solution accuracy with less than 5% variance across varying iteration numbers, circuit depths, and Hamiltonian step sizes. Moreover, they require approximately 7 to 8 times fewer measurements to achieve comparable precision under the same parameter variations. Experimental validation on a 10-item 1dBPP instance using IBM quantum computers shows the CD-mixer ansatz achieves five times more feasibility solutions and greater robustness against NISQ noise. Collectively, these results establish DC-QAOA as a resource-efficient framework for combinatorial optimization on near-term quantum devices., This work is partially supported by the Project Grant No. PID2021-126273NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” and “ERDF Invest in your Future”, the Basque Government through Grant No. IT1470- 22, the Spanish Ministry of Economic Affairs and Digital Transformation through the QUANTUM ENIA project call-Quantum Spain project, and CPS-MindSpore funding. Y.B. and X.C. acknowledge the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S. R.Q.X. and J.L.T. appreciate the support from China Scholarship Council (CSC) under Grant Nos: 202206890001 and 202306890004. Y.B. acknowledges ayudas Ramón y Cajal (RYC2023-042699-I)., With funding form the Spanish government through the "Severa Ochoa Centre of Excellence" accreditation (CEX2024-001445-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fluxoid valve effect in full-shell nanowire Josephson junctions

  • Paya, Carlos
  • Matute-Cañadas, F. J.
  • Levy Yeyati, A.
  • Aguado, Ramón
  • San-José, Pablo
  • Prada, Elsa
We introduce a new type of supercurrent valve based on full-shell nanowires. These hybrid wires consist of a semiconductor core fully wrapped in a thin superconductor shell and subjected to an axial magnetic field. Due to the tubular shape of the shell, the superconductor phase acquires an integer number n of 2π twists or fluxoids that increases in steps with applied flux. By connecting two such hybrid wires, forming a Josephson junction (JJ), a flux-modulated supercurrent develops. If the two superconducting sections of the JJ have different radii R1 and R2, they can develop equal or different fluxoid numbers n1, n2 depending on the field. If n1 = n2, the supercurrent is blocked, while it remains finite for n1 = n2. This gives rise to a fluxoid valve effect controlled by the applied magnetic field or a gate voltage at the junction. We define a fluxoid-valve quality factor that is perfect for cylindrically symmetric systems and decreases as this symmetry is reduced. We further discuss the role of Majorana zero modes at the junction when the full shell nanowires are in the topological superconducting regime., This research was supported by Grants No. MDM-2014-0377, No. FPU20/01871, No. PID2021-122769NB-I00, No. PID2021- 125343NB-I00, No. TED2021-130292B-C41, No. PRE2022- 101362, No. PID2023-150224NB-I00, and No. CEX2024- 001445-S, funded by MICIU/AEI/10.13039/501100011033, “ERDF A way of making Europe” and “ESF+”., With funding form the Spanish government through the "Severa Ochoa Centre of Excellence" accreditation (CEX2024-001445-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Local control of perpendicular magnetic anisotropy of Pd/Co multilayers via ion bombardment

  • Sebastiani-Tofano, Eugenia
  • Parente, Ana
  • Alcázar Ruano, Pedro L.
  • Abuín, Manuel
  • González-García, Álvaro
  • López-Sánchez, Jesús
  • Rubio-Zuazo, J.
  • Manso Silvan, M.
  • Mascaraque, Arantzazu
  • González Barrio, Miguel Ángel
  • Menghini, Mariela
  • Schuller, Ivan K.
  • Basaran, Ali C.
  • González, Elvira M.
  • Rodríguez de la Fuente, Óscar
  • Muñoz-Noval, A.
In this work, we have controlled locally the magnetic anisotropy of PdCo multilayers using ion beam modification. First, we have used techniques with different probing depths to confirm that cobalt is partially oxidized in the Pd/Co multilayers exhibiting PMA fabricated by sputtering, presumably due to the diffusion of atmospheric oxygen migrated through the Pd capping layer. Then, low energy ion bombardment has been employed to induce a structural disorder in the upper layers of the multilayer, gradually reducing the PMA at local scale with increasing ion doses. Medium ion doses lead to a marked decline in PMA, resulting in equivalent magnetic anisotropy directions and the loss of characteristic labyrinthine magnetic domain morphology. High ion doses completely suppress PMA, yielding a typical in-plane shape anisotropy. By combining controlled PMA reduction via lithographic techniques, we create elongated structures displaying distinct magnetic responses; bombarded regions exhibit reduced PMA, whereas adjacent regions maintain their PMA. Notably, regions with reduced PMA do not disrupt the distribution of perpendicular magnetic domains in neighboring PMA regions, even at widths as narrow as 500 nm, demonstrating the robustness of the PMA domain structure., The authors acknowledge financial support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación, Spain, through projects PID2021–122980OB-C51, PID2021-122980OB-C52, PID2021-126323OA-I00 and CNS2023-144128; from Ministerio de Universidades (Salvador de Madariaga program) through research stay PRX21/00740. Authors also acknowledge funds from European Commission through MAGNAMED 734801 project (H2020-MSCA-RISE-2016), as well as from 2018-T1/IND-10360 Talento Program and project TEC-2024/TEC-380 “Mag4TIC” from Comunidad de Madrid. The authors are also grateful to the SpLine staff for their valuable help during experiment No. 25-02-1002 and for the financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades and Consejo Superior de Investigaciones Científicas under Grant Nos. 2010 6O E 013, 2021 60 E 030 and CEX2024-001445-S. J. Romero from the C.A.I de Técnicas Físicas-UCM is acknowledged for the SQUID measurements. J.L.-S. acknowledges the financial support from grant PID2023-151036OA-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF, EU, and from grant RYC2022-035912-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF + ). M.M.S. acknowledges projects PID2020-112770RB-C22 and PID2023-151371OB-C22, funded by MCIN/AEI/10.13039/501100011033 and FEDER, EU. A.G-G. thanks Universidad Complutense de Madrid and Banco Santander (CT82/20-CT83/20) for financial support. M.M. acknowledges support from the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2020-001039-S). Work at UCSD was supported by the U.S. Department of Energy’s Office of Basic Energy Science under Grant DE-FG02-87ER45332., With funding form the Spanish government through the "Severa Ochoa Centre of Excellence" accreditation (CEX2024-001445-S; CEX2020-001039-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low-temperature, high-throughput spatial atomic layer deposition of NiOx nanocrystalline thin films from [Ni(ipki)2]

  • Porcar, Samuel
  • Schmickler, Marcel
  • Okcu, Hayri
  • Obenlüneschloß, Jorit
  • D'Ercole, Stefano
  • Cervera Gabalda, Laura
  • Galarreta-Rodriguez, Itziar
  • Rubio-Zuazo, Juan
  • González Cuadra, Jaime
  • Lahlahi, Abderahim
  • Fraga, Diego
  • Sanchez-Velasquez, Camilo
  • Bellet, Daniel
  • Fix, Thomas
  • Carda, Juan B.
  • Devi, Anjana
  • Muñoz-Rojas, David
Spatial atomic layer deposition (SALD) is a recent ALD variant enabling much faster deposition rates, even at atmospheric pressure, making it ideal for scalable, low-cost devices. NiOx, a transparent p-type oxide, is widely used in emerging technologies like perovskite solar cells. However, no suitable SALD process for NiO thin films has been reported so far. In this work, we present the deposition of nanocrystalline NiOx thin films via SALD using a recent Ni precursor not yet explored for the ALD of NiO, namely, bis(4-(isopropylamino)pent-3en-2-onato)nickel(II) or [Ni(ipki)2]. O2 has been used as coreactant, with higher deposition rates being achieved if H2O is added to the O2 flow. A narrow ALD window has been obtained between 230 °C and 250 °C, where a GPC of 0.023 nm is observed. This corresponds to a deposition rate of 1.4 nm/min, which is 2 to 10 times faster than the rates reported for conventional ALD of NiO thin films. Remarkably, the growth onset of NiOx starts around only 170 °C. The transmittance of the films reaches nearly 97 % in the visible for 55 nm thick films. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) studies revealed a high homogeneity of the films. X-ray diffraction (XRD), Raman spectroscopy and X-ray absorption spectroscopy (XAS) studies confirm the presence of a cubic NiOx crystalline phase. Finally, NiOx films have been deposited on Ag nanowire networks, demonstrating the possibility of depositing homogeneous and conformal coatings with this new process., The authors would like to express their gratitude for the financial support provided by several research initiatives: the FOTOCER project (PID2020–116149GB-I00), funded by MCIN/AEI/10.13039/501100011033; the CLUSCERM project (TED2021–130963B-C22), supported by MCIN/AEI/10.13039/501100011033 and the European Union’s NextGenerationEU/PRTR initiative; and the CLUSKER project (INNEST/2024/420), funded by the Valencian Institute of Business Competitiveness (IVACE). Additional support was received from the, jointly funded by ANR (project number 21-CE08–0047) and DFG (project number 490773082). The work has also benefited from funding under the Investissement d’Avenir (PIA) program – LabEx MINOS. Furthermore, the authors acknowledge support through the postdoctoral fellowship CIAPOS/2023/425 and the predoctoral fellowship CIACIF/2022/277, both co-financed by the Valencian regional government and the European Social Fund. Authors also want to thank the “Cátedra de Innovación Cerámica 'Ciutat de Vila-real' de l’Universitat Jaume I” for the financial support. We also acknowledge the Spanish Ministerio de Ciencia, Innovación y Universidades and Consejo Superior de Investigaciones Científicas for financial support and for provision of synchrotron radiation facilities through the projects 2010 6 0E 013, 2021 60 E 030 and CEX2024-001445-S., With funding form the Spanish government through the "Severa Ochoa Centre of Excellence" accreditation (CEX2024-001445-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Measuring coherence factors of states in superconductors through local current

  • Dourado, Rodrigo A.
  • Danon, J.
  • Leijnse, M.
  • Seoane Souto, Rubén
The coherence factors of quasiparticles in a superconductor determine their properties, including transport as well as their susceptibility to electric fields. In this work, we propose a way to infer the local coherence factors using local transport to normal leads. Our method is based on measuring the local current through a lead as the coupling to a second one is varied; the shape of the current is determined by the ratio between the local coherence factors, becoming independent of the coupling to the second lead in the presence of local electron-hole symmetry, i.e., coherence factors |u|=|v|. We apply our method to minimal Kitaev chains: arrays of quantum dots coupled via narrow superconducting segments. These chains feature Majorana-like quasiparticles (zero-energy states with |u|=|v|) at discrete points in parameter space. We demonstrate that the local current allows us to estimate the local Majorana polarization (MP)—a measurement of the local Majorana properties of the state. We derive an analytical expression for the MP in terms of local currents and benchmark it against numerical calculations for two- and three-sites chains that include a finite Zeeman field and electron-electron interactions. These results provide a way to quantitatively assess the quality of Majorana states in short Kitaev chains., R.A.D. acknowledges financial support from the Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq), Brazil (Grant No. 141461/2021-7) and Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES), Brazil (Grant No. 88887.111639/2025-00). M.L. acknowledges funding from the European Research Council (ERC) under the European Unions Horizon 2020 research and innovation programme under Grant Agreement No. 856526, the Swedish Research Council under Grant Agreement No. 2020-03412, and NanoLund. R.S.S. acknowledges funding from the Horizon Europe Framework Program of the European Commission through the European Innovation Council Pathfinder Grant No. 101115315 (QuKiT), the Spanish Comunidad de Madrid (CM) "Talento Program" (Project No. 2022-T1/IND-24070), and Grants No. PID2022-140552NA-I00 and No. CEX2024-001445-S funded by MICIU/AEI/10.13039/501100011033., With funding form the Spanish government through the "Severa Ochoa Centre of Excellence" accreditation (CEX2024-001445-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dual-functional Triphenyltriindole “knitting polymers” for Efficient Iodine Capture and Zn-I2 Batteries.

  • Méndez-Gil, Nayara
  • García-Balaguer, Paula
  • Martínez, Lidia
  • Huttel, Yves
  • Uddin, M. Afsar
  • Ferrer, M. Luisa
  • Gómez-Lor, Berta
This work introduces a class of nitrogen-rich porous polymers synthesized via “knitting polymerization” using a redoxactive triphenyltriindole monomer. Two synthetic routes-thermal Friedel−Crafts reaction (TRIPh-d) and solvent-free mechanochemical activation (TRIPh-m) yield polymers with similar chemical structures but markedly different surface areas. Despite this, both materials exhibit exceptional iodine uptake from hexane solution (up to 1.87 g g−1), placing them among the highestperforming amorphous microporous organic polymers reported to date. The superior adsorption is attributed to the reversible oxidation of triindole units, forming radical cations that enhance iodine capture through electrostatic interactions. Comparative analysis with a truxene-based analog (TX-m) confirms the critical role of nitrogen-rich scaffolds over surface area alone. Beyond iodine sequestration, TRIPh-d also demonstrates outstanding performance as a cathode material in zinc−iodine batteries (ZIBs), delivering a specific capacity of 228 mA h g−1 at 1 A g−1, 99% Coulombic efficiency, and 72% capacity retention over 10,000 cycles. This dual functionality combining environmental remediation with energy storage-along with the sustainability of the synthesis, positions these redox-active knitting polymers as promising candidates for future applications., This work was supported by PID2023-150022NB-I00, PID2021-126524NB-100, PID2024-155161OB-I00, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” and TED2021-130372B–C42 funded by MCIN/AEI/10.13039/501100011033 and by “European Union Next Generation EU/PRTR”. MAU thanks to Spanish Ministry of Science, Innovation and Universities for RAMÓN Y CAJAL 2021 fellowship (Project RYC2021-034211-I) and CSIC for ATRACCIÓN DE TALENTO RAMÓN Y CAJAL 2021 (Project 20236AT033) P. G.-B. acknowledges the grant PRE2022-101750 funded by MCIN/AEI/10.13039/501100011033 and FSE+. F. Agulló is gratefully acknowledged for performing Raman spectrscopy. Authors acknowledge the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interfacial adsorption and aggregation of 4H-pyranylidene dyes on TiO2: experimental–computational structure–function study for indoor dye-sensitized solar cells

  • Royo, Raquel
  • Andreu, Raquel
  • Mendieta-Moreno, Jesús I.
  • Martínez, José I.
  • Franco, Santiago
A series of D-π-A organic dyes incorporating a 4H-pyranylidene donor, a thiophene π–spacer, and a cyanoacrylic acid anchoring group were developed to investigate substituent-controlled interfacial organization on TiO2 photoanodes. The influence of bulky triisopropylsilyl (TIPS) and hydroxymethyl groups on adsorption strength, aggregation behavior, and charge-transfer dynamics was analyzed through combined experimental characterization and multiscale modeling. Periodic DFT calculations on anatase (101) and (0 0 1) surfaces reveal stronger adsorption and enhanced surface packing for hydroxymethyl derivatives, together with facet-dependent variations in adsorption energetics and surface relaxation, while molecular dynamics simulations correlate aggregate compactness with device performance. In dye-sensitized solar cells, TIPS-substituted dyes exhibit higher open-circuit voltages due to reduced recombination, whereas hydroxymethyl analogues provide higher photocurrents. Power conversion efficiencies reach 7.4% under AM 1.5G illumination and up to 14.9% under indoor lighting, with devices retaining their efficiency for over 1000 h of operation, demonstrating excellent long-term stability. A clear relationship between interfacial aggregation, recombination resistance, and photovoltaic response is established, highlighting the role of adsorption geometry and collective organization in governing interfacial charge-transfer processes. These results establish substituent engineering on the π-spacer as an effective strategy to control interfacial organization and stability in next-generation DSSCs for both outdoor and indoor applications., The work at the University of Zaragoza was financially supported by Gobierno de Aragón (E47_23R), the University of Zaragoza (UZ2023-CIE01) and The Severo Ochoa Centres of Excellence program through Grant CEX2023-001286-S funded by MICIU/AEI /10.13039/501100011033. R. Royo acknowledges for the financial support of Gobierno de Aragón: Fellowship program 2018–2022 period co-financed with the Operational Program FSE Aragón 2014-2022. J. I. Martínez acknowledges funding by MICIU (Grants PID2023-149077OB-C31, TED2021-12941A-I00 and PLEC2021-007906 funded by MCIN/AEI/10.13039/501100011033 and by the ’European Union NextGenerationEU/PRTR’), CAM (Grant SYNMOLMAT-CM: TEC-2024/TEC-459) and “The Severo Ochoa Centres of Excellence” program through Grant CEX2024-001445-S. Both research groups acknowledge the MICINN (RED2022-134503-T). J. I. Mendieta-Moreno acknowledges funding by the European Union (HORIZON-MSCA-2021-PF-101065707)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2024-001445-S),, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

SLPcalculator: a web-based tool to estimate nanoparticle heating with peak analysis and F-test

  • López-Vázquez, Iago
  • Fernández-Afonso, Yilian
  • Santana-Otero, Antonio
  • Ruta, Sergiu
  • Amigo, Alfredo
  • Morales, María Del Puerto
  • Chantrell, Roy W.
  • Gutiérrez, Lucía
  • Serantes, David
Accurately determining the Specific Loss Power (SLP) remains a major challenge in magnetic hyperthermia and photothermal heating. In this work, we examine the practical implementation of the Peak Analysis Method (PAM), an alternative to Newton's-law-based approaches. Our focus is on how the number of data points affects the identification of the linear regime around the peak of the ΔT(t) curve, as this method relies on calculating and comparing the slopes of the heating and cooling branches around the maximum. Using an F-test-based statistical criterion, we objectively determine the valid linear range and compare the resulting SLP values with those obtained from the Initial Slope Method (ISM), one of the most common Newton-law-based approaches, which also relies on linear range fit. Our results reveal that the correct determination of the linear range leads to significantly different SLP values compared to those obtained using arbitrary time windows, underlining the necessity of employing statistical criteria for a robust and reproducible analysis. Finally, we introduce an open-access website (SLPcalculator.com) that integrates PAM with the F-test, providing a systematic and user-friendly tool for reliable SLP estimation without the need for manual fitting procedures., The authors would like to acknowledge financial support from the Severo Ochoa Program for Centers of Excellence funded by grants CEX2023-001286-S and CEX2024-001445-S. Projects CNS2023-144321, CNS2024-154574, and TED2021-130191B-C43, funded by MCIU/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR. Xunta de Galicia is acknowledged for projects ED431F 2022/005 and ED431B 2023/055. Fondo Social del Gobierno de Aragon (grupo DGA E15-23R) is also acknowledged. D.S. also acknowledges the Ramón y Cajal subprogram (RYC2020-029822-I/AEI/10.13039/501100011033)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2024-001445-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The coupling of ferroelectric polarization and oxygen vacancy migration enables electrically controlled thermal memories

  • Barneo, David
  • Royo, Mikel
  • Ramos, Rafael
  • Carrete, Jesús
  • Romero-Bernad, Hugo
  • Jiménez, Ricardo
  • Leborán, Victor
  • Magén, César
  • Varela Dominguez, Noa
  • Algueró, Miguel
  • Rurali, Riccardo
  • Pardo, José A.
  • Rivadulla, Francisco
  • Langenberg, Eric
Here we investigate epitaxial Hf0.5Zr0.5O2 ferroelectric thin films as potential candidates to be used as non-volatile electric-field-modulated thermal memories. The electric-field dependence of the thermal conductivity of metal/Hf0.5Zr0.5O2/Y2O3:ZrO2 devices is found to be hysteretic—resembling a polarization vs. electric field hysteresis loop—, reaching a maximum (minimum) at large applied positive (negative) electric fields from the top metallic electrode. This dynamic thermal response is compatible with the effects of the coupling between the ferroelectric polarization and oxygen ion migration in the Hf0.5Zr0.5O2 layer, in which the oxygen vacancies are the main phonon scattering centers and the polarization acts as an electrically active ion migration barrier that creates the hysteresis. This new mechanism enables two non-volatile states: high (ON) and low (OFF) thermal conductivity states when the electric field is removed, with an ON/OFF ratio of 1.6, which can be switched with applied voltages lower than -5 and +5 V, respectively. Both the ON and OFF states exhibit high stability over time, though the switching speed is limited by ion mobility in the Y2O3:ZrO2 electrode., This work has received financial support from the Ministerio de Ciencia, Innovación y Universidades–Spain (MCIN/AEI/ 10.13039/501100011033), projects PID2021-128281NA-I00, PDC2023-145934-I00, PID2024-162811NB-I00, PID2022-136790OB-I00, PID2022-138883NB-I00, TED2021-130930B-I00, PID2023-147211OB-C22 and the Severo Ochoa Centers of Excellence Program under grant CEX2023-001263-S, CEX2024-001445-S, and CEX2023-001286-S. D.B., N.V.-D., and H.R.-B. acknowledge financial support from Ministerio de Ciencia, Innovación y Univiersidades (Spain) through the FPI fellowship (PRE2022-105700, PRE2020-096467, and PREP2023-002157, respectively). E.L. acknowledges the Serra Húnter Plan from the Generalitat de Catalunya. We thank the Centro de Supercomputación de Galicia (CESGA) for the use of their computational resources. N.V.-D., R.R., V.L., and F. R. acknowledge the financial support from Xunta de Galicia Centro de investigación do Sistema universitario de Galicia accreditation 2023–2027, ED431G 2023/03) and the European Union (European Regional Development Fund -ERDF). F.R. receives financial support from the Oportunius Program, Xunta de Galicia. H.R.-B., C.M., and J.A.P. acknowledge financial support from Gobierno de Aragón projects E13_23R and E28_23R, including FEDER funding. R.R. acknowledges support from the Grants RYC 2019-026915-I and CNS2024-154679 funded by the MCIN/AEI/10.13039/501100011033 and by the ESF investing in your future and the European Union NextGenerationEU/PRTR. The authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas (LMA)” at Universidad de Zaragoza. F.R. and N.V. received financial support from “Catedra Televes en Diseño Microelectronico” (TSI-069100-2023-0010) by PERTE Chip, Secretaria de Estado de Telecomunicaciones e Infraestructuras Digitales, Ministerio para la Transformacion Digital y de la Funcion Publica, and it has been cofunded by the European Union-NextGenerationEU., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001263-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2024-001445-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Power-tuned structural and optical properties of bimetallic AgAu nanoparticles produced by gas aggregation sources

  • Aznar, Yaiza
  • Álvarez-García, Covadonga
  • Mayoral, Álvaro
  • Zhao, Junlei
  • Cánovas, Elvira
  • Andrés, Alicia de
  • Martínez Orellana, Lidia
  • Huttel, Yves
Data will be available upon reasonable request., The outstanding properties of bimetallic nanoparticles have made them the subject of extensive research, with ongoing efforts to refine their fabrication to better control their final properties. Silver-gold nanoparticles are one of the most representative binary systems owing to their wide range of applications. Herein, we present the fabrication of bimetallic silver-gold nanoparticles using a solvent-free, gas-phase synthesis method. With this method, the nanoparticle growth can be controlled precisely. We present the evolution of the size, composition and chemical structure of silver-gold nanoparticles as a function of the power used during fabrication, ranging from 4 nm to 10 nm. Nanoparticles display two main structures: core@shell (Au@Ag) and quasi-Janus, with both elements not fully segregated, and a thin Ag shell surrounding the nanoparticles. The nanoparticle size and population of each structure are power-dependent. The formation of these structures is discussed in terms of molecular dynamics simulations. Optical measurements revealed that the nanoparticles presented a clear plasmon resonance peak around 420 nm originating from the silver surface and a less sharp plasmon around 520 nm from the sum of gold plus the interaction of silver-containing nanoparticles. The oxidation of silver upon air exposure proceeds very slowly, preserving the nanoparticles’ properties over time., L.M. & Y.H. acknowledge the project PID2021-126524NB-100 and AM acknowledges CNS2023-144346 funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by “ERDF A way of making Europe”. Y.A., A.M., A. d A., L.M. and Y.H. acknowledge the Severo Ochoa Centres of Excellence program through Grants CEX2024-001445-S and CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2024-001445-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self-preservation ice layer mechanisms in mixed CO2–CH4 gas hydrate systems: Implications for icy planetary environments

  • Esteso, V.
  • Inácio, L.
  • Corkery, R. W.
  • Panja, S. K.S.
  • Carretero-Palacios, Sol
  • Boström, M.
Aims. Gas hydrates can develop self-preserving ice layers when pre-existing hydrate phases are exposed to near-freezing conditions outside their thermodynamic stability field. We investigated the energetic feasibility and equilibrium thickness of such coatings on mixed CO2–CH4 hydrates under conditions approaching hydrate quadruple-point regimes and assessed their implications for the buoyancy of micron-scale clusters in icy ocean environments. Methods. We modelled multi-layer hydrate–ice–water systems using Casimir–Lifshitz theory combined with experimental and ab initio dielectric data. Casimir–Lifshitz interaction energies were calculated for hydrate cores with gas-depleted surface regions, and equilibrium ice-layer thicknesses were obtained through Gibbs free-energy minimisation. Cage occupancy was treated parametrically to explore near-surface non-equilibrium states rather than thermodynamic stability domains. Results. The model predicts energetically favoured self-preserving ice layers for CH4-rich compositions or reduced gas occupancy. These coatings can significantly modify effective density and enable flotation of micron-scale hydrate clusters even at relatively high CO2 fractions, depending on cluster size, composition, and ice-layer thickness. Conclusions. Self-preserving ice layers sustained by dispersion forces may influence buoyancy and volatile redistribution under near-freezing metastable conditions relevant to some icy ocean environments. The results provide a physically constrained framework for equilibrium ice-layer formation. However, kinetic stability and long-term survival were beyond the scope of this study., LI, SKP, and MB’s research contributions are part of the project No. 2022/47/P/ST3/01236 co-funded by the National Science Centre and the European Union’s Horizon 2020 research and innovation programme under the Maria Skłodowska-Curie grant agreement No. 945339. Institutional and infrastructural support for the ENSEMBLE3 Centre of Excellence was provided through the ENSEMBLE3 project (MAB/2020/14) delivered within the Foundation for Polish Science International Research Agenda Programme and co-financed by the European Regional Development Fund and the Horizon 2020 Teaming for Excellence initiative (Grant Agreement No. 857543), as well as the Ministry of Education and Science initiative “Support for Centres of Excellence in Poland under Horizon 2020” (MEiN/2023/DIR/3797). S.C.P. acknowledges the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S, and grant CNS2022-135967 funded by MICIU/AEI /10.13039/501100011033 and by the European Union NextGenerationEU/ PRTR. V.E. acknowledges JDC2022-048530-I funded by MICIU/AEI /10.13039/501100011033 and by the European Union NextGenerationEU/PRTR, the Ministerio de Universidades of Spain, and the University of Seville under the Grant Margarita Salas and postdoctoral Grant Junta de Andalucía no. USE- 26180-Y. RWC acknowledges the kind hospitality at Ensemble3-Centre of Excellence during early parts of the work with this manuscript. We thank Subhojit Pal for fruitful discussions and some input at an early stage of this manuscript., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Controlled synthesis of MOF-derived Ce–Ln mixed oxides: influence of lanthanide doping and supported Ni on CO₂ conversion through the reverse water gas shift reaction

  • Martínez-Gómez, Carlos
  • Vasile, Raluca Loredana
  • Bachiller-Baeza, Belén
  • Serrano-Lotina, Ana M.
  • Gándara, Felipe
  • Álvarez-Galván, Consuelo
The reverse water-gas shift (RWGS) reaction (CO2 + H2 ⇆ CO + H2O) is a key process for CO2 valorization, providing a sustainable route to generate CO as an intermediate for methanol and Fischer-Tropsch syntheses. In this work, mixed ceria–lanthanide oxides derived from Ce–Ln RPF-4 metal–organic frameworks (Ln = La, Nd, Pr) were prepared and evaluated as RWGS catalysts. The parent MOFs were synthesized solvothermally and calcined in air to yield solid solutions Ce1-xLnxO2-x/2 with controlled compositions and high structural homogeneity. The influence of the dopant nature (Ln) and proportion was systematically studied, as well as the effect of incorporating Ni(10 mol%) by impregnation. Characterization by PXRD, Raman spectroscopy, TPR, XPS, and TEM confirmed that La3+, Pr3+, and Nd3+ ions substitute Ce4+ in the fluorite lattice, generating oxygen vacancies that enhance reducibility and oxygen mobility. The Ce–La 8:2 composition showed the most favorable balance between defect density and lattice stability, achieving the highest CO₂ conversion and CO selectivity. Ni addition markedly increased activity due to the bifunctional synergy between metallic Ni sites for H₂ activation and the doped ceria support for CO₂ adsorption and reduction. The best catalyst, Ni(10 mol%)/Ce–La 8:2, reached a CO formation rate of 2.2 mol h􀀀 1 gcat 􀀀 1 with 98% CO selectivity at 700 ◦C under high space velocity (300 L/h gcat􀀀 1), 90 h, time-on-stream. These results demonstrate that MOF-derived Ce–Ln oxides constitute a versatile platform for designing efficient and compositionally tunable catalysts for CO₂ conversion via the RWGS reaction., This work was supported by grant PID2021-12277OB-100, PID2024-162143NB-I00, PID2024-161847OB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”. The authors acknowledge the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S. The authors thank Adrián Gómez Herrero (CNME – National Center for Electron Microscopy, UCM, Madrid (Spain)) for scanning transmission electron microscopy analyses., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Recent Synthesis Routes to Previously Inaccessible Zeolite Porosity: From Ultrasmall Pore to Ultraporous Materials

  • Shin, Jiho
  • Yu, Huajian
  • Jo, Donghui
  • Gao, Zihao Rei
  • Villaescusa, Luis A
  • Hong, Suk Bong
  • Camblor, Miguel Ángel
Published as part of ACS Applied Materials & Interfaces special issue “Harnessing the Power of Porosity: Future Trends and Applications”., The diverse porosity and properties of zeolites, together with their stability, drive applications from catalysis to adsorption. Conventional hydrothermal synthesis has yielded a large number of zeolite framework types, the vast majority of which are synthetic. However, this approach still has limitations, as exemplified by the large disparity between known and hypothetical but feasible framework types. This Perspective highlights recent unconventional synthesis routes that expand the range of attainable structures and porosities: ultrasmall open pores by zeolite reconstruction; unfeasible zeolites with tunable pores by assembly disassembly organization-reassembly; the embedded isoreticular RHO zeolite family synthesized using mixed inorganic cations; shape selective small and medium pore zeolites synthesized via an excess fluoride approach; and phosphonium-enabled ultraporous zeolites (<13.2 tetrahedral atoms/1000 Å3). Their associated applications include selective dehydration, CO2 capture, catalysis, and decontamination. Although challenges such as scalability, organic structure-directing agent cost and emissions persist, these unconventional chemistries offer important opportunities for further evolution of zeolite structures for environmental, energy and health-related applications., We acknowledge financial support from the Spanish Ministry of Science Innovation (PID2022-137889OB-I00, PID2021-128141OB-C22 and PID2024-162542OB-I00 MCIN/AEI/10.13039/501100011033), the Consejería de Educación, Ciencia y Universidades, Comunidad de Madrid (SYG-2024-ECO-737, HALZEOCAT-CM), EcoPro HN, Shanxi Research Institute of Huairou Laboratory, and from the Korea Research Institute of Chemical Technology (KK2611-10 and KK2611-20). We also acknowledge the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445 S., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anisotropy of the photonic Urbach tail

  • Menéndez, Marcos
  • Mai, Lan Hoang
  • Tasnim Arony, Nazifa
  • Carfagno, Henry
  • McCabe, Lauren N.
  • Zide, Joshua M. O.
  • López, Cefe
  • Doty, Matthew F.
  • García Fernández, Pedro David
Disorder in photonic lattices creates localized states inside the photonic band gap. The energy distribution of these states is often described as a Lifshitz tail, even though it is inconsistent with Lifshitz statistics near the band edge. Here, we show that in photonic-crystal waveguides with intentionally engineered anisotropic disorder, the band-edge tail accessible experimentally follows an Urbach law, with cumulative statistics 𝐹⁡(Δ)=exp⁡[−(Δ/𝛼)𝛽], where Δ is the spectral detuning from the band edge, and an exponent 𝛽≈1 independent of disorder strength and orientation. In contrast to Lifshitz behavior, the density of states is maximal at the band edge and decays into the gap. Crucially, we find that the Urbach energy 𝛼 is anisotropic, with a pronounced directional splitting and qualitatively different scaling for disorder parallel and perpendicular to the waveguide axis. These conclusions are supported by quantitative agreement between optical measurements of GaAs photonic-crystal waveguides and full-vector simulations. The anisotropic Urbach energy emerges as a sensitive probe of the coupling between structural disorder and the guided Bloch mode, and a practical metric to characterize structural disorder in photonic devices., This work was supported by the Spanish Ministry of Science, Innovation and Universities via the national project PID2024-158832NB-C21 (PSYNC), by the HORIZON-EIC-2022 Pathfinder project NEUROPIC (Grant No. 101098961), and by the Spanish MICIU Severo Ochoa program for Centres of Excellence through Grant No. CEX2024-001445-S. This work was supported by the U.S. National Science Foundation through the University of Delaware Materials Research Science and Engineering Center (Grant No. DMR-2011824) and the EPSCoR RII Track-2 FEC program (Award No. 2217786)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2024-001445-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic and plasmonic Au-Fe nanocolumnar thin films with tailored anisotropy

  • Garrido-Segovia, María
  • González Sagardoy, María Ujué
  • Magro, Raúl
  • Navarro, Elena
  • Espinosa, Ana
  • García-Martín, José Miguel
This work demonstrates the potential of two magnetic and plasmonic systems combining nanocolumnar gold (Au) and iron (Fe) in nanocolumnar bilayered thin films, fabricated using the glancing angle deposition (GLAD) by the sputtering technique. This approach successfully merges the unique properties of both nanostructured materials, offering a synergistic combination of optical and magnetic functionalities. The article details their morphological, structural, optical and magnetic characteristics, demonstrating how a surface plasmon resonance emerges under specific conditions. This feature enables the application of these systems in plasmonic applications. Furthermore, the magnetic characterization provides evidence for the existence of a perpendicular anisotropy contribution at the Fe/Au interface, thereby allowing for enhanced magnetic tunability and a broader range of magnetic applications. Lastly, the potential of the systems for in vitro biological applications will be investigated by studying the viability and adherence of tumor cells., The Ministerio de Universidades has supported this work through a Formación de Profesorado Universitario (FPU21/00272) grant (M. G.-S.). The authors also acknowledge funding from different projects. J.M.G.-M. thanks grant PID2021-126524NB-100 funded by MCIN/AEI/10.13039/501100011033 and by ‘‘ERDF A way of making Europe’’. E. N. thanks PID2021- 123112OB-C21 funded by MICIIN and PID2024-156318OB-I00 funded by MICIU and TED2021-129688B-C21 funded by AEI. A. E. thanks PID2021-127033OB-C21 and PID2024-161273OB-C21 funded by MCIN/AEI/10.13039/501100011033 and CNS2023-144689 granted by the MCIN/AEI/10.13039/501100011033 and the “European Union NextGenerationEU”/PRTR, Comunidad de Madrid (ASAP-CM S2022/BMD-7434, LUNABRAINsingle bondCM TEC-2024/TEC) and CSIC (PIE-20226AT024 and Ayudas Incorporación de Científicos Titulares OEP (ref. 2024ICT15)). This work was supported by the Severo Ochoa Program for Centers of Excellence in R&D (CEX2024-001445-S), granted to the Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC). This study was carried out within the framework of the TRANSCAN-3 ERA-NET project TRANSCAN2024-2930-142_XPANTHER, with funding provided by the Asociación Española Contra el Cáncer (AECC) and the Instituto de Salud Carlos III (ISCIII). Finally, we express our gratitude to the Conexión Nanomedicina network from CSIC. All authors acknowledge the service from the MiNa Laboratory at IMN, and funding from EU (FEDER, FSE), MCIN/AEI/10.13039/501100011033 and Next Generation EU/PRTR (EQC2021-006944-P). Moreover, they also thank Raquel Álvaro for her help in the EDS measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biotite as a natural layered dielectric for two-dimensional transistors and memristors

  • Pucher, Thomas
  • Hernández-Ruiz, Julia
  • Munuera, C.
  • Castellanos-Gómez, Andrés
The integration of natural layered minerals into van der Waals heterostructures offers a scalable and earth-abundant route to high-performance 2D electronics. Here, we explore biotite, an ion-rich member of the mica family, as a multifunctional building block in ultrathin device architectures. Mechanically exfoliated biotite flakes are incorporated as gate dielectrics in monolayer MoS2 field-effect transistors, yielding low transfer hysteresis (20 mV) and field-effect mobilities around 10 cm2 V−1 s−1 in all-van der Waals configurations with graphite contacts. The same platform supports high-performance photodetection, with responsivities up to 392 AW−1 and rise times of ~20 ms. Biotite is also implemented as an active switching material in metal-insulator-metal memristors, where silver filament formation drives reproducible bipolar resistive switching across more than 104 cycles with memory windows of 102–104 Ω. By inverting the electrode bias configuration, the same device transitions from non-volatile to volatile threshold switching, which is especially relevant for neuromorphic device applications. Switching voltages scale with flake thickness, reaching below 0.5 V for 6 nm devices. Together, these findings reveal biotite as a promising natural layered 2D dielectric, unlocking new device functionalities in 2D transistors and memristors., The authors would like to thank Beatriz H. Juárez for her help with the UV–Vis absorption measurements and Ismael Ballesteros Jiménez and Nuria Jiménez-Arévalo for their help with SEM-EDX acquisition. We acknowledge support from Grant PID2023-151946OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU. We also acknowledge funding from the European Research Council (ERC) through the ERC-2024-PoC StEnSo project (Grant Agreement 101185235) and the ERC-2024-SyG SKIN2DTRONICS project (Grant Agreement 101167218). ICMM-CSIC authors also acknowledge support from the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S, funded by MICIU/AEI/10.13039/501100011033. J. Hernandez-Ruiz acknowledges funding from the Spanish Ministry of Science and Innovation through the PRE2002-105538 grant., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2024-001445-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Phonon-Dominated In-Plane Thermal Conductivity of Single-Flake Metallic Ti3C2Tx MXene

  • Hemert, Max van
  • Ramsden, Hugh
  • Ippolito, Stefano
  • Varghese, Sebin
  • Liu, Bohai
  • Tornero Gasca, Elvira
  • Muñoz Rojo, Miguel
  • Wang, Hai I.
  • Gogotsi, Yury
  • Tielrooij, Klaas-Jan
MXenes are a promising class of 2D materials, with prospects in applications such as electromagnetic interference shielding, energy storage, catalysis, and thermal management. Despite the importance of understanding their thermal transport properties, it is not clear whether electrons or phonons dominate heat transport, and the experimentally obtained in-plane thermal conductivities vary substantially. Here, we address this by studying in-plane heat transport in single Ti3C2Tx MXene flakes using spatiotemporal microscopy, directly visualizing heat transport in space and time. We obtain a thermal diffusivity of 0.05 cm2 s-1, corresponding to an in-plane thermal conductivity of 13-16 W m-1 K-1. Using an upper limit for the electronic conductivity based on terahertz measurements, we find that electrons carry at most half of the heat. This shows that─despite their metallic nature─phonons play an important role in the heat transport of Ti3C2Tx MXene, providing an unconventional combination of heat and charge transport properties., The authors thank Changhoon Park for discussions. The ICN2 is supported by the Severo Ochoa Centres of Excellence program, Grant CEX2021-001214-S, funded by MCIU/AEI/10.13039.501100011033. K.-J.T. acknowledges funding from the European Union’s Horizon 2020 research and innovation program under Grant Agreement No. 101125457 (ERC CoG “EQUATE”) and Spanish MCIN/AEI project (PID2022-142730NB-I00 “HYDROPTO”). M.M.R. acknowledges the European Union ERC CoG THERMO2DEAL 101123381, the national project MXENE2DEVICES (PID2023-149764OA-I00), and the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S. S.I. and Y.G. acknowledge the Army Research Laboratory for supporting this work under Cooperative Agreements no. W911NF-19-2-0119 and W911NF-24-2-0100., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2024-001445-S), Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Magnetic hyperthermia in focus: emerging non-cancer applications of magnetic nanoparticles

  • Gavilán, Helena
  • Gallo-Cordova, Alvaro
  • Rábade-Chediak, Maura
  • Páez-Rodríguez, Amira
  • Morales, María del Puerto
  • Gutiérrez, Lucía
Magnetic hyperthermia (MH), which leverages the ability of magnetic nanoparticles (MNPs), located in the tumor, to generate heat upon exposure to an alternating magnetic field (AMF), has long been synonymous with cancer therapy. However, recent advancements highlight emerging applications of MH beyond oncology, including neuromodulation, tissue engineering, biosensing, catalysis, and environmental remediation. All these applications intelligently harness the same principle to achieve a wide range of new functionalities in MNPs besides local heating, including drug release, eradication of pathogens, manipulation of cell membranes, mechanical responses for novel non-invasive therapies, boosting chemical reactions, intensifying processes and degrading or desorbing pollutants like CO2, just to name a few. This review provides a comprehensive overview of the latest breakthroughs in non-cancer applications of MH. While some fields, ranging from infection control and organ cryopreservation to nanorobotics in biomedicine, require non-toxic biocompatible and biodegradable MNPs (iron oxides) and AMFs restricted to radiofrequencies in the range of 100–300 kHz and an appropriate field intensity (few tens of kA m−1) to avoid tissue damage, some other areas, like sustainable catalysis, sensing, etc., open up the possibility of using diverse chemical elements besides iron (e.g., cobalt, nickel, carbon) mainly in the form of alloys, and AMFs of higher frequencies (well above 300 kHz) and amplitudes (well above 10–20 kA m−1). Indeed, engineering of MNPs with suitable catalytically active elements (gold, nickel, ruthenium, palladium, etc.), support materials (silica, aluminium/magnesium oxide, etc.) or surface coating with appropriate (bio) molecules (enzymes, RNA/DNA fragments, etc.) is crucial for each application, as well as considering the effect of local temperature (for instance, achieving the Curie temperature, Tc, of the nanomaterial, provoking the de-swelling of polymers, activating/deactivating enzymes or boosting the efficiency of a catalytic process). Furthermore, this work discusses the current limitations and future directions required to expand the reach of MH. Finally, this review serves as a critical resource for researchers seeking to harness MH beyond cancer treatment and integrate it into novel scientific and technological frontiers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

SLPcalculator: a web-based tool to estimate nanoparticle heating with peak analysis and F-test

  • López-Vázquez, Iago
  • Fernández-Afonso, Yilian
  • Santana-Otero, Antonio
  • Ruta, Sergiu
  • Amigo, Alfredo
  • Morales, M. Puerto
  • Chantrell, Roy W.
  • Gutiérrez, Lucía
  • Serantes, David
Accurately determining the Specific Loss Power (SLP) remains a major challenge in magnetic hyperthermia and photothermal heating. In this work, we examine the practical implementation of the Peak Analysis Method (PAM), an alternative to Newton's-law-based approaches. Our focus is on how the number of data points affects the identification of the linear regime around the peak of the ΔT(t) curve, as this method relies on calculating and comparing the slopes of the heating and cooling branches around the maximum. Using an F-test-based statistical criterion, we objectively determine the valid linear range and compare the resulting SLP values with those obtained from the Initial Slope Method (ISM), one of the most common Newton-law-based approaches, which also relies on linear range fit. Our results reveal that the correct determination of the linear range leads to significantly different SLP values compared to those obtained using arbitrary time windows, underlining the necessity of employing statistical criteria for a robust and reproducible analysis. Finally, we introduce an open-access website (SLPcalculator.com) that integrates PAM with the F-test, providing a systematic and user-friendly tool for reliable SLP estimation without the need for manual fitting procedures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Interfacial adsorption and aggregation of 4H-pyranylidene dyes on TiO2: experimental–computational structure–function study for indoor dye-sensitized solar cells

  • Royo, Raquel
  • Andreu, Raquel
  • Mendieta-Moreno, Jesús I.
  • Martínez, José I.
  • Franco, Santiago
A series of D-π-A organic dyes incorporating a 4H-pyranylidene donor, a thiophene π–spacer, and a cyanoacrylic acid anchoring group were developed to investigate substituent-controlled interfacial organization on TiO2 photoanodes. The influence of bulky triisopropylsilyl (TIPS) and hydroxymethyl groups on adsorption strength, aggregation behavior, and charge-transfer dynamics was analyzed through combined experimental characterization and multiscale modeling. Periodic DFT calculations on anatase (101) and (0 0 1) surfaces reveal stronger adsorption and enhanced surface packing for hydroxymethyl derivatives, together with facet-dependent variations in adsorption energetics and surface relaxation, while molecular dynamics simulations correlate aggregate compactness with device performance. In dye-sensitized solar cells, TIPS-substituted dyes exhibit higher open-circuit voltages due to reduced recombination, whereas hydroxymethyl analogues provide higher photocurrents. Power conversion efficiencies reach 7.4% under AM 1.5G illumination and up to 14.9% under indoor lighting, with devices retaining their efficiency for over 1000 h of operation, demonstrating excellent long-term stability. A clear relationship between interfacial aggregation, recombination resistance, and photovoltaic response is established, highlighting the role of adsorption geometry and collective organization in governing interfacial charge-transfer processes. These results establish substituent engineering on the π-spacer as an effective strategy to control interfacial organization and stability in next-generation DSSCs for both outdoor and indoor applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Magnetic capture and process-oriented upcycling of PET nanoplastics enabled by mesocrystalline iron oxide nanoflowers

  • Herrera-Aquino, Rafael
  • Rivera, Fernanda Lyzeth
  • Díaz-Ufano, Carlos
  • Gutiérrez, Lucía
  • Veintemillas-Verdaguer, Sabino
  • Morales, María del Puerto
  • Gallo-Cordova, Alvaro
Nanoplastics are widely recognized as persistent environmental pollutants that require removal from aquatic systems. Here, we propose an alternative strategy based on the functional valorization of polyethylene terephthalate (PET) nanoplastics through their integration into magnetic hybrid materials. Mesocrystalline iron oxide nanoflowers (NF) were synthesized via a rapid microwave-assisted polyol route, producing multicore magnetic architectures capable of efficiently capturing dispersed PET nanoplastics. The NFs exhibit a capture capacity of up to 10,000 mg of NanoPET per gram of magnetic collector, enabling rapid magnetic harvesting of nanoplastics from aqueous media. Instead of treating the collected plastic as waste, the captured NanoPET is incorporated into PET/NF hybrid materials, where the nanoplastics become a structural and functional component of the system. FTIR analysis reveals the interfacial interactions responsible for NanoPET/NF formation, confirming the adhesion of the nanoflowers to the PET surface. The resulting NanoPET/NF combine magnetic recoverability (vs= 1.35 × 10−4 m/s with ∇H = 24 T/m) with adsorption and catalytic functionalities, exhibiting adsorption capacities of 25 mg/g for methylene blue and achieving a 11% higher degradation than at 25 °C under alternating magnetic field activation (200 kHz, 24 kA/m), through localized magnetic heating without bulk heating of the medium. The sample retained both their magnetic recoverability and catalytic activity over multiple reuse cycles. This work provides a pathway to valorize plastic nanowaste into recoverable systems for magnetically-assisted advanced water treatment.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Automated atomic site determination by four-dimensional scanning transmission electron microscopy data analytics

  • Fernández Cañizares, Francisco
  • Rodríguez Vázquez, Javier
  • Veloso Ferreira, Rafael
  • Tenreiro Villar, Isabel
  • Rivera Calzada, Alberto Carlos
  • Fernando Saavedra, Amalia
  • Sánchez García, Miguel A.
  • Xie, Yong
  • Castellanos Gómez, Andrés
  • Varela Del Arco, María
  • Sánchez Santolino, Gabriel
Automated atomic column detection and identification constitutes an active open front in advanced scanning transmission electron microscopy techniques. In this work we use clustering algorithms in combination with dimensionality reduction techniques to identify specific columns in a series of very different cutting-edge materials, ranging from ultrathin 2D materials to bulk semiconductors or complex oxides, which include different types of columns (heavy and light), and thus pose a challenge towards automated detection. By implementing a three-stage cascaded clustering pipeline, we are able to automatically identify all atomic column sites of our test materials and resolve them from the background interatomic space. This approach could enable new data-driven in-depth analysis of materials, allowing the automatic detection of chemical and structural characteristics of materials.