Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 160
Encontrada(s) 2 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

General scales unlock AI evaluation with explanatory and predictive power

  • Zhou, Lexin
  • Pacchiardi, Lorenzo
  • Collins, Katherine M.
  • Zhang, Seraphina
  • Zhao, Qinlin
  • Huang, Yitian
  • Sun, Luning
  • Prunty, Jonathan E.
  • Li, Zongqian
  • Sanchez-Garcia, Pablo
  • Casares, Pablo A. M.
  • Zu, Jiyun
  • Martínez-Plumed, Fernando|||0000-0003-2902-6477
  • Moros-Daval, Yael
  • Jiang-Chen, Ke-Xin
  • Burden, John
  • Mehrbakhsh, Behzad|||0000-0001-9017-989X
  • Stillwell, David
  • Cebrian, Manuel
  • Wang, Jindong
  • Henderson, Peter
  • Wu, Sherry Tongshuang
  • Kyllonen, Patrick C.
  • Cheke, Lucy
  • Xie, Xing
  • Hernández-Orallo, José|||0000-0001-9746-7632
[EN] Ensuring safe and effective use of artificial intelligence (AI) requires understanding and anticipating its performance on new tasks, from advanced scientific challenges to transformed workplace activities1, 2-3. So far, benchmarking has guided progress in AI but has offered limited explanatory and predictive power for general-purpose AI systems4, 5, 6, 7-8, attributed to limited transferability across specific tasks9, 10-11. Here we introduce general scales for AI evaluation that elicit demand profiles explaining what capabilities common AI benchmarks truly measure, extract ability profiles quantifying the general strengths and limits of AI systems and robustly predict AI performance for new task instances. Our fully automated methodology builds on 18 rubrics, capturing a broad range of cognitive and intellectual demands, which place different task instances on the same general scales, illustrated on 15 large language models (LLMs) and 63 tasks. Both the demand and the ability profiles on these scales bring new insights such as construct validity through benchmark sensitivity and specificity and explain conflicting claims about whether AI has reasoning capabilities. Ultimately, high predictive power at the instance level becomes possible using the general scales, providing superior estimates over strong black-box baseline predictors, especially in out-of-distribution settings (new tasks and benchmarks). The scales, rubrics, battery, techniques and results presented here constitute a solid foundation for a science of AI evaluation, underpinning the reliable deployment of AI in the years ahead., We thank the POLARIS Lab and the Computational Cognitive Science Lab at Princeton University, the European AI Office, the UK AISI, the Future of Life Institute, the OECD Future of Skills team, S. Chang, M. Zilka, J. Lian, R. Burnell, W. Schellaert, A. Gomez, M. Tesic, C. Li and P. Romero for their valuable help and feedback at certain stages of the project. We thank OpenAI for granting us research access to several LLMs to conduct the experiments in this paper and DeepSeek and Meta for giving us access to the weights of their models. We acknowledge support from the following institutions: Microsoft Accelerate Foundation Models Research (AFMR) grant programme, Long-Term Future Scholarship financed by Coefficient Giving (formerly Open Philanthropy) and the Spanish Government's Knowledge Generation Projects (PID2023-150271NB-C21). This work was also supported by CIPROM/2022/6 (FASSLOW), IDIFEDER/2021/05 (CLUSTERIA), CIACIF/2023/276, financed by Generalitat Valenciana, the EC H2020-EU grant agreement no. 952215 (TAILOR), Spanish grants PID2021-122830OB-C42 (SFERA), PID2023-150271NB-C21 and PID2024-162030OB-100 (ROBIN) financed by MCIN/AEI/10.13039/501100011033 and 'ERDF A way of making Europe', Catedra ENIA-UPV in Sustainable AI Development, TSI-100930-2023-9, INCIBE's Chair financed by the EU's NextGenerationEU, EUR2024-153548 (PREDAIT) 'Towards Predictable AI' from 'Spanish Europe Excelencia' 2024, Spanish National Research Council (CSIC) Special Intramural Projects programme and the Cambridge Trust. M.C. declares support from Google.org through the Silicon Valley Community Foundation by means of a grant to Fundacion General CSIC. The research of J.H.-O. is supported by OpenAI's grant to the 'AI Progress through the Lens of Predictable AI Ecosystems' programme, which is based at the Leverhulme Centre for the Future of Intelligence at the University of Cambridge.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical simulation of liquid sheet formation and primary atomization in a simplex pressure-swirl atomizer through a VOF-LES approach

  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Carreres, Marcos|||0000-0001-6430-6613
  • Muñoz-Agulló, Alicia|||0009-0008-0707-499X
  • Demoulin, François-Xavier
[EN] Numerical simulations of the atomization issued by pressure-swirl injectors can help improve their design to reduce CO2 and NOx power plant emissions. In particular, two-phase flow simulations allow the characterization of the resulting spray through characteristic droplet sizes and velocities. This computational work focuses on the liquid atomization of n-heptane in the simplex pressure-swirl atomizer of the CORIA Rouen Spray Burner (CRSB). The present work proposes the simultaneous numerical resolution of the internal flow and atomization development through a Volume of Fluid-Large Eddy Simulation (VOF-LES) approach using a hexahedral mesh and Adaptive Mesh Refinement (AMR). A nonreactive condition has been tested with the interIsoFoam solver of the OpenFOAM open-source toolbox. First, the achieved results are analyzed in terms of qualitative properties, such as spray development and vortex visualization. Then, the internal flow is studied from both the air core radius and the film thickness evolution along the axial length. Finally, droplet statistics are obtained through a droplet detection algorithm based on a volume fraction threshold. For validation purposes, the numerical results are compared with available Phase Doppler Anemometry (PDA) experimental data for this operating condition of the CRSB academic burner. The investigation demonstrates the capability of the proposed numerical methodology to predict the physics under the primary atomization process, allowing us to describe the air core formation and to capture the instabilities that trigger the jet breakup, leading to the spray evolution., This work is part of the R+D+I project "Modelado de combustible sostenible de aviacion para bajas emisiones. Atomizacion (SAFLOW-BREAK)", reference TED2021131618A-C22, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU/PRTR". The authors thankfully acknowledge the computer resources at MareNostrum4 Supercomputer and technical support provided by the BSC (RES IM-2022-3-0011 and IM-2023-1-0004) in the frame of the Spanish Supercomputing Network. On the other hand, the support given to Ms. Alicia Munoz by the Generalitat Valenciana within the program "Subvenciones para contratacion de personal investigador predoctoral (CIACIF/2022/067)" is gratefully acknowledged. The authors would also like to thank Dr. Diego Ferrando for his help and support with the case setup and the fruitful discussions on the results.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Integrated computational modeling of large format additive manufacturing: Developing a digital twin for material extrusion with carbon fiber-reinforced acrylonitrile butadiene styrene

  • Castelló-Pedrero, Pablo|||0000-0002-6927-6430
  • García-Gascón, César|||0009-0007-6772-0474
  • Javier Bas-Bolufer
  • García Manrique, Juan Antonio|||0000-0001-9507-0746
[EN] Material extrusion (MEX) continues to be a pivotal additive manufacturing (AM) process, involving the selective heating and layer-by-layer deposition of material. However, conventional finite-element models (finite-element analysis) face limitations in accurately simulating the MEX process, highlighting the need for experimental validation. This paper highlights an advanced material modeling technology that streamlines the development of composite parts using large format AM (LFAM). It specifically focuses on a thermoplastic acrylonitrile butadiene styrene (ABS) matrix composite material enriched with 20% short carbon fibers. The study employs integrated computational materials engineering, integrating (i) the manufacturing process, (ii) the material¿s microstructure, (iii) homogenization techniques, and (iv) the performance of the final part. The development of a digital twin for pellet extrusion is proposed, emphasizing the importance of micro-structure characterization to account for warpage and residual stresses that lead to part distortion. The demonstrator manufactured for this study is a wind turbine mold of a blade section. Experimental tests revealed an elastic modulus of 5.5¿GPa and a hardening modulus of 2.4¿GPa for the composite. The numerical microscopic model showed a 16% error in the elastic modulus compared to experimental results. The study concludes that the homogenization techniques are effective in predicting the elastic properties but lack accuracy in the plastic region. The application of the model to the LFAM process of pellet extrusion is demonstrated, with simulation results showing a maximum deformation close to the center of the wind turbine blade mold., This work was supported by Generalitat Valencia (GVA) and the Spanish Ministry of Science and Innovation (INVEST/2022/131, CIACIF/2021/286, IDIFEDER/2021/040, TED2021-130879B-C21 and PID2019-108807RB-I00).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Deep Learning-Based Fiber Orientation Analysis for Discontinuous Composites: Application to Material Extrusion Additive Manufacturing

  • García-Gascón, César|||0009-0007-6772-0474
  • Javier Bas-Bolufer
  • Castelló-Pedrero, Pablo|||0000-0002-6927-6430
  • Chinesta, Francisco
[EN] This paper presents a novel deep learning-based (DL) approach to characterize short-fiber orientation in material extrusion large format additive manufacturing (LFAM). The method focuses on Acrylonitrile Butadiene Styrene (ABS) reinforced with short glass fibers 20%, a material widely used due to its enhanced mechanical performance. Traditional fiber orientation analysis, which relies on microscopy and manual image processing, is often costly and time-consuming. To address this, we developed Python algorithms to generate synthetic SEM-like images to train a Convolutional Neural Network (CNN). The proposed CNN accurately predicts the fiber orientation tensors directly from micrographs, with consistent results with conventional methods. The combination of synthetic data generation and deep learning provides a scalable and rapid alternative for fiber orientation analysis. This approach improves the analysis of fiber orientation in discontinuous composite materials and has the potential to be applied to additive manufacturing and other forming processes. This study demonstrates that combining deep learning with synthetic data generation provides an effective, scalable solution for fiber orientation analysis in LFAM, confirming that CNN-based methods can greatly improve material characterization. More accurate performance prediction and quality control could be achieved in fiber-reinforced additive manufacturing., This research received partial funding from the Government of Spain under Project No. PID2023-151110OB-I00 and Generalitat Valenciana under CIPROM/2022/3 and CIACIF/2021/286. This research project is part of the program DesCartes and is supported by the National Research Foundation, Prime Minister's Office, Singapore under its Campus for Research Excellence and Technological Enterprise (CREATE) program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of Li1.3Al0.3Ti1.7(PO4)3 content and particle size on the electrochemical properties and stability of polymer-based solid electrolytes for lithium batteries

  • Simon, Sonia
  • Ferrer-Nicomedes, Sergio
  • Garcia-Belmonte, Germa
  • Barba-Juan, Antonio
  • Vicente-Agut, Nuria
  • Mormeneo-Segarra, Andrés|||0000-0002-8827-3649
[EN] This work addresses the current limitations of standard composite solid electrolyte membranes through a systematic optimization of the LATP Li1.3Al0.3Ti1.7(PO4)3 wt fraction and rigorous particle size control via selective milling. By precisely integrating these calibrated ceramic particles within a ternary PVDF-HFP/PEO matrix, the resulting configuration establishes a highly balanced framework for advanced lithium-ion battery applications. The optimal composition, designated CSE2H (26 wt% LATP with particle size d50 approximate to 0.875 mu m), exhibits exceptional electrical properties: minimum activation energy (0.138 eV), maximum ionic conductivity (1.12 & sdot;10- 4 S cm- 1 at 30 degrees C and 6.33 & sdot;10- 4 S cm- 1 at 70 degrees C), and stable electrochemical operation within the voltage range 2.5-4.2 V vs. Li+/Li, LFP-cell operating conditions. Electrochemical impedance spectroscopy reveals low interfacial resistance, while chronoamperometry measurements yield a lithium-ion transference number of 0.48, indicating efficient ion transport. Galvanostatic cycling experiments confirm high coulombic efficiency (98%) and good capacity retention: initial capacity of 147 mAh g- 1 LFP at 0.5C stabilizing at 77.58 mAh g- 1 LFP after 200 cycles, with specific discharge capacity of 127.2 mAh g- 1 LFP at 2C. Concurrently, these integrated results establish that this 26 wt% LATP baseline configuration successfully balances interfacial compatibility with competitive electrochemical properties, presenting a highly viable pathway for targeted solidstate battery development., A. B.-J. and G. G.-B. have received funding from Generalitat Valenciana under the Pla Complementari "Programa de Materials Avancats", 2022 (grant number MFA/2022/030) and CIPROM/2024/91. A. B.-J. and N. V.-A. acknowledge the financial support received from projects PID2020-112659RB-I00 and PID2024-158590OB-I00, funded by MICIU/AEI/10.13039/501100011033. N. V.-A. acknowledges support from Universitat Jaume I under project UJI/2023/016. S. F.-N. thank Generalitat Valenciana for the FPI Fellowship Program (grant numbers CIACIF/2021/050). A. M.-S. acknowledge the financial support received from projects PAID-06-25 and PAID-10-24, funded by Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Octahedrality and Gâteaux smoothness

  • Cobollo-Gómez, Christian|||0000-0002-5901-5798
  • Hájek, P.
[EN] We prove that every Banach space admitting a Gâteaux smooth norm and containing a complemented copy of I1 has an equivalent renorming which is simultaneously Gâteaux smooth and octahedral. This is a partial solution to an open problem from the early nineties. (c) 2024 The Author(s). Published by Elsevier Inc. This is an open access article under the CC BY-NC license (http://creativecommons .org /licenses /by -nc /4 .0/)., The present work was done while the first author was on a PhD stay at the Department of Mathematics of the Faculty of Electrical Engineering at the Czech Technical University in Prague, and he is grateful for all the support and kindness received there. The authors thank the anonymous referee for his/her helpful comments that improved the quality of the manuscript. The first author was supported by Generalitat Valenciana (through Project PROMETEU/2021/070 and the predoctoral fellowship CIACIF/2021/378) and by MICIU/AEI/10.13039/501100011033 and by ERDF/EU (through Projects PID2019-105011GB-I00, PID2021-122126NB-C33 and PID2022-139449NB-I00). The second author was supported by GA23-04776S and SGS24/052/OHK3/1T/13 of CTU in Prague.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Diseño y Exploración de Aceleradores Hardware en la Plataforma SELENE

  • Andreu-Cerezo, Pablo|||0000-0003-2070-9271
  • López Rodríguez, Pedro Juan|||0000-0003-4544-955X
  • Flich Cardo, José
  • Hernández Luz, Carles|||0000-0003-1192-6223
  • Picornell, Tomás
  • Kostalampros, Vatistas
  • Moreto, Miquel
[ES] El diseño de aceleradores hardware esta adquiriendo una gran importancia debido al aumento de aplicaciones que usan redes neuronales y la aproximacion al l¿mite de la ley de Moore. En este contexto, la exploracion de las opciones de diseño de estos aceleradores y su impacto en el rendimiento necesita de plataformas donde integrar dichos aceleradores de manera agil. Con esa finalidad este trabajo presenta la plataforma de SELENE, una plataforma abierta donde es sencillo integrar aceleradores diseñados en Xilinx HLS o con interfaz estandar AXI para su testeo en FPGA., El presente trabajo ha sido parcialmente financiado mediante el proyecto IPMAN (Tecnicas Innovadoras para Infraestructuras, Aplicaciones y Servicios en Centros de Datos y Sistemas Altamente Distribuidos) con referencia PID2021-123627OB-C51 y por la Generalitat Valenciana mediante el proyecto Subvenciones para la contratacion de personal investigador predoctoral con codigo CIACIF/2021/412.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Standardized Framework for Cleaning Non-Normal Yield Data from Wheat and Barley Crops, and Validation Using Machine Learning Models for Satellite Imagery

  • Arizo-García, Patricia|||0000-0002-6725-9098
  • Castiñeira-Ibáñez, Sergio|||0000-0001-6414-3906
  • Cruzado-Campos, Enric
  • Ricarte Benedito, Beatriz|||0000-0001-8094-1908
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • San Bautista Primo, Alberto|||0000-0003-4846-6611
[EN] Modern combine harvesters can collect real-time geolocated yield data, but it is subject to errors. Various protocols have been proposed to clean this data, each with varying levels of complexity. This data is valuable for precision agriculture to implement site-specific management and to train models to predict yield using remote sensing data. Machine learning and deep learning techniques have shown their potential for precision agriculture, and their performance shows no significant differences between models trained with data cleaned using a computationally demanding protocol or a simpler one, such as parametric filtering. However, parametric filtering approaches primarily rely on statistics that are highly sensitive to data distribution and do not effectively filter inliers. The objective of this study is to develop a data-cleansing method that leverages robust statistical measures, specifically the median and interquartile range, to effectively identify and filter outliers and inliers while retaining valid observations in datasets collected from combine harvesters, thereby minimizing the influence of non-normal data distributions. Different levels of data cleaning were applied to a total of 7399 ha of wheat and barley crops, and the quality of each cleaning level was compared. The selected protocol improved the spatial structure of the data, deleting up to 42% and 33% of the data at the polygon level, for wheat and barley, respectively. It increased the mean and median, and decreased the standard deviation and coefficient of variation of the data. Between 78.7% and 82.9% of the fields showed a normal distribution after applying the selected method, and machine learning performance improved compared with the raw data. Compared with previous data cleaning studies, the present work proposes an automatic, low-computational, parametric filtering method that uses robust statistics for non-normal distributions. In addition, its scalability has been demonstrated by applying the method to a large dataset, improving data quality and the performance of yield-prediction ML models in all cases., This research was funded by the PREDIC-PRO, project SCPP2100C008733XV0, of the State Research Agency of the Ministry of Science, Innovation and Universities, and the ACIF Generalitat Valenciana, European Union (European Social Fund: Investing in Your Future), grant number CIACIF/2022/255.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

SYNPA: SMT Performance Analysis and Allocation of Threads to Cores in ARM Processors

  • Navarro-Edo, Marta|||0000-0002-4334-460X
  • Feliu-Pérez, Josué|||0000-0003-3017-4266
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[EN] Simultaneous multithreading processors improve throughput over single-threaded processors thanks to sharing internal core resources among instructions from distinct threads. However, resource sharing introduces inter-thread interference within the core, which has a negative impact on individual application performance and can significantly increase the turnaround time of multi-program workloads. The severity of the interference effects depends on the competing co-runners sharing the core. Thus, it can be mitigated by applying a thread-to-core allocation policy that smartly selects applications to be run in the same core to minimize their interference. This paper presents SYNPA, a simple approach that dynamically allocates threads to cores in an SMT processor based on their run-time dynamic behavior. The approach uses a regression model to select synergistic pairs to mitigate intracore interference. The main novelty of SYNPA is that it uses just three variables collected from the performance counters available in current ARM processors at the dispatch stage. Experimental results show that SYNPA outperforms the default Linux scheduler by around 36%, on average, in terms of turnaround time in 8-application workloads combining frontendbound and backend-bound benchmarks. Index Terms¿Simultaneous Multithreading, Scheduling, HighPerformance Computing, HPC applications, Thread-to-Core allocation, synergistic applications, intra-core interference., This work has been supported by the Spanish Ministerio de Ciencia e Innovacion and European ERDF under grant PID2021-123627OB-C51, TED2021-130233B-C32 and Generalitat Valenciana under grant AICO/2021/266. Marta Navarro is supported by Subvenciones para la contratacion de personal investigador predoctoral by CIACIF/2021/413 . Josue Feliu is supported by the RYC2021-030862-I contract, funded by the MCIN/AEI /10.13039/501100011033 and the European Union NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Integrative time-scale and multi-omics analysis of host responses to viroid infection

  • Marquez Molins, Joan
  • Villalba-Bermell, Pascual
  • Corell, Julia
  • Gomez, Gustavo
  • Pallás Benet, Vicente|||0000-0003-4954-989X
[EN] Viroids are circular RNAs of minimal complexity compelled to subvert plant-regulatory networks to accomplish their infectious process. Studies focused on the response to viroid-infection have mostly addressed specific regulatory levels and considered specifics infection-times. Thus, much remains to be done to understand the temporal evolution and complex nature of viroid-host interactions. Here we present an integrative analysis of the temporal evolution of the genome-wide alterations in cucumber plants infected with hop stunt viroid (HSVd) by integrating differential host transcriptome, sRNAnome and methylome. Our results support that HSVd promotes the redesign of the cucumber regulatory-pathways predominantly affecting specific regulatory layers at different infection-phases. The initial response was characterised by a reconfiguration of the host-transcriptome by differential exon-usage, followed by a progressive transcriptional downregulation modulated by epigenetic changes. Regarding endogenous small RNAs, the alterations were limited and mainly occurred at the late stage. Significant host-alterations were predominantly related to the downregulation of transcripts involved in plant-defence mechanisms, the restriction of pathogen-movement and the systemic spreading of defence signals. We expect that these data constituting the first comprehensive temporal-map of the plant-regulatory alterations associated with HSVd infection could contribute to elucidate the molecular basis of the yet poorly known host-response to viroid-induced pathogenesis., The authors thank Dr. Beatriz Navarro for critically reading this manuscript. This work was supported by the Agencia Estatal de Investigacion (AEI) (co-supported by FEDER) Grants PID2019-104126RB-I00 (GG) and PID2020-115571RB-I00 (VP). J.M.M. and J.C.S. was/is recipient of a pre-doctoral contract ACIF-2017-114 and CIACIF-2021-279 from the Generalitat Valenciana. The funders had no role in the experiment design, data analysis, decision to publish, or preparation of the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Incorporation of Fully Bio-Based Butylene Succinate Oligomers into Poly(butylene succinate) by Melt Mixing

  • Olivas-Alonso, Carmen
  • Chiralt, Amparo|||0000-0003-1134-8144
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] In this study, fully bio-based oligomers of butylene succinate (OBS) with different molecular weights (low: L-OBS, medium: M-OBS and high: H-OBS) were incorporated into poly(butylene succinate) (PBS) by melt mixing at varying loadings of 5¿15 wt%. Then, PBS/OBS films were obtained by thermo-compression and characterized to assess their suitability for sustainable food packaging. Thus, OBS were homogeneously incorporated into PBS matrix and modulated the thermal, mechanical, and barrier properties of the PBS. L-OBS (Mn = 1150 g·mol¿1) plasticized the amorphous PBS, depending on its concentration, more effectively than M-OBS (Mn: 8700 g·mol¿1) and H-OBS (Mn: 18,650 g·mol¿1), as deduced from the thermo-mechanical analysis. In every case, OBS enhanced crystallinity, mainly L-OBS, which reduced the film strength and increased water vapor permeability, depending on its concentration. In contrast, H-OBS improved mechanical strength, stiffness, and barrier performance. In all cases, X-ray diffraction confirmed the preservation of the PBS¿s monoclinic crystalline structure but slightly shifted the diffraction angle depending on the ratio of the end-chain groups in the blend, thus reflecting the contribution of OBS in the crystalline lattice. Finally, oligomer incorporation resulted in an overall migration increase in different food simulants, impairing their application in packaging., This research was funded by the Spanish Ministry of Science and Innovation (MICI), Grant No. PID2024-162110OB-I00, and Generalitat Valenciana (GVA), Grant Nos. AGROALNEXT/2022/026, INNVA1/2024/106, and CIPROM/2021/071. Carmen Olivas-Alonso also acknowledges the financial support received during her PhD scholarship (No. CIACIF/2021/422).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A New Association Approach for Multi-Sensor Air Traffic Surveillance Data Based on Deep Neural Networks

  • Vico-Navarro, Joaquin|||0000-0001-8608-0280
  • Balbastre Tejedor, Juan Vicente|||0000-0003-4434-8095
  • Vila Carbó, Juan Antonio|||0000-0001-8330-8286
[EN] Air Traffic Services play a crucial role in the safety, security, and efficiency of air transportation. The International Civil Aviation Organization (ICAO) performance-based surveillance concept requires monitoring the actual performance of the surveillance systems underpinning these services. This assessment is usually based on the analysis of data gathered during the normal operation of the surveillance systems, also known as opportunity traffic. Processing opportunity traffic requires data association to identify and assign the sensor detections to a flight. Current techniques for association require expert knowledge of the flight dynamics of the target aircraft and have issues with high-manoeuvrability targets like military aircraft and Unmanned Aircraft (UA). This paper addresses the data association problem through the use of the Multi-Sensor Intelligent Data Association (M-SIOTA) algorithm based on Deep Neural Networks (DNNs). This is an innovative perspective on the data association of multi-sensor surveillance through the lens of machine learning. This approach enables data processing without assuming any dynamics model, so it is applicable to any aircraft class or airspace structure. The proposed algorithm is trained and validated using several surveillance datasets corresponding to various phases of flight and surveillance sensor mixes. Results show improvements in association performance in the different scenarios., This research was conducted with funding from Generalitat Valenciana under an ACIF grant (CIACIF/2021/489), from Vicerrectorado de Investigación at Universitat Politècnica de València (UPV) under a project grant for NEWTECOM (PAID-11-22) and within the framework of the SATERA project, which has received funding from the SESAR 3 Joint Undertaking (JU) under grant agreement Nº 101164313. The JU is supported by the European Union s Horizon Europe research and innovation programme, as well as by the SESAR 3 JU members other than the Union. Funding for open access charge: Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Empleo de Filtralite para eliminar Ni en aguas de escorrentía urbana: una modelación numérica para la gestión sostenible del agua en las ciudades, Use of Filtralite to remove nickel in urban runoff water: A numerical modelling for sustainable water management in cities

  • Mederos, Marlon
  • Pla, Concepción
  • Valdes-Abellan, Javier
  • Benavente, David
[EN] This study focuses on the management of urban drainage systems designed to reduce stormwater pollution. It emphasizes the removal of nickel (Ni), found in urban runoff water, due to its toxicity and potential accumulation in living organisms. Laboratory column tests are proposed using Filtralite as the filtration material. The HP1 module is utilized to calibrate a model that analyzes the transport and elimination of this heavy metal. It was observed that the interaction between the material and the contaminated solution increases the pH, leading to the precipitation of nickel hydroxide in the initial nodes of the column. The results indicate that the concentration of the contaminant in the solution is directly dependent on the pH. Under acidic conditions, Ni remains in solution, but beginning at a pH of 7.5, its elimination starts, and it completely precipitates for pH values above 11., [ES] Este estudio se centra en la gestión de sistemas de drenaje urbano capaces de reducir la contaminación de las aguas pluviales. Se enfoca en la eliminación de níquel (Ni), presente en las aguas de escorrentía urbana, debido a su toxicidad y posible acumulación en los organismos vivos. Se plantean ensayos en columnas de laboratorio utilizando Filtralite como material filtrante. Se emplea el módulo HP1 para calibrar un modelo que analiza el transporte y eliminación de este metal pesado. Se observa que la interacción entre el material y la disolución contaminada aumenta el pH, lo que provoca la precipitación de hidróxido de Ni en los primeros nodos de la columna. Los resultados indican que la concentración del contaminante en la disolución depende directamente del pH. En condiciones ácidas, el Ni permanece en la disolución, pero a partir de un pH de 7.5, comienza su eliminación, hasta desaparecer para valores superiores a 11., Este trabajo fue financiado por la Conselleria de Educación, Cultura, Universidades y Empleo (proyecto GV/2020/059) y la beca de investigación predoctoral (CIACIF/2021/469) concedida a M.M.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving harvester yield maps postprocessing leveraging remote sensing data in rice crop

  • Fita-Silvestre, David
  • Franch-Gras, Belen
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • Castiñeira-Ibáñez, Sergio|||0000-0001-6414-3906
  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
  • San Bautista Primo, Alberto|||0000-0003-4846-6611
[EN] Precision Agriculture relies significantly on yield data obtained from combine harvesters, which constitutes a pivotal tool for optimizing crop productivity. Despite its potential, challenges in data accuracy persist, necessitating the development of novel automated postprocessing protocols for yield data refinement. In this paper, different automatic postprocessing protocols were evaluated using remote sensing data, specifically Sentinel-2 satellite imagery. Various automatic postprocessing protocols were applied to a dataset spanning 946 hectares over a four-year period. Commercial sensors on combine harvesters acquired the yield data. The analysis included global (field-level) adjustments and local adjustments at a finer scale (40 × 40 m² level), employing interval mean ± n·(standard deviation) calculations. Three n values (1, 1.5, and 2.5) were tested, resulting in thirteen distinct postprocessing variations. Finally, a mean filter was also applied. The results demonstrated that the yield correlation with satellite data increased with the reduction of yield variability at the pixel level (10 m). The best results were obtained using n = 1 with a 3 × 3 mean filter, where Sentinel-2 pixels remained unaffected, and the average Root Mean Square Error (RMSE) during validation was 0.572 t·ha¿¹. In addition, the geostatistical parameters (coefficient of variation, semivariance, and range within a 10 m pixel) reached optimal values. Finally, the postprocessing uncertainty was determined to be 0.200 t·ha¿1. These results validate the efficacy of a novel postprocessing protocol for refining yield data in rice crops. The integration of pixel-level data from combine harvesters with Sentinel-2 imagery emerges as a promising approach for optimizing crop management, offering valuable insights for the advancement of Precision Agriculture., This research was funded by PREDIC-PRO Project SCPP2100C008733XVD funded by the State Research Agency of theMinistry of Science, Innovation and Universities, and Conselleria de Cultura, Educación y Ciencia, Generalitat Valenciana (CIACIF/2021/143), European Union European Social Fund Investing in Your Future.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Real-world accelerated stress test protocols for high-temperature proton-exchange membrane fuel cell based on heavy-duty vehicle operation

  • Tritscher, Florian
  • Bodner, Merit
  • Hacker, Viktor
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • López-Juárez, Marcos|||0000-0001-9886-4728
  • Àlex|||0009-0002-3150-8280
[EN] High temperature proton exchange membrane fuel cells (HT-PEMFCs) are a carbon-neutral technology that can help overcome common low-temperature PEMFC issues such as high requirements for purity of the fuel or limited heat rejection at lower temperatures and enable a green transition in powering heavy-duty vehicles (HDVs). However, the higher operating temperature of up to 200 °C poses an additional challenge to the development of suitable and durable materials. The development of accelerated stress tests (ASTs) that can mimic real life applications is crucial to enable a time efficient investigation of new materials and to establish comparable material assessment standards across different laboratories. Here we present an AST that enables the investigation of new HT-PEMFC materials in HDV application related conditions and can be readily adapted to investigate individual cells in a stack. The proposed AST is based on realistic performance of HDFCVs across drive cycle data of the Trans-European Transport Network (TEN-T) and was generated with a real driving simulation-based approach using a multi-layered modeling framework integrating a heavy-duty vehicle with HT-PEMFC technology. In addition, we introduce a highly accelerated stress test (HAST) based on the same simulations with additional stressors to amplify degradation. We provide detailed information regarding the generation of the AST and the HAST as well as experimental data of both protocols being performed for 100 h at 180 °C with state-of-the-art HT-PEMFC materials to validate the testing procedure., This work was supported by the Horizon Europe program of the European Union under project MEAsureD (grant agreement No. 101101420). The authors wish to express their gratitude to Kurt Mayer, Clemens GroB; and Bernhard Marius for their support in setting up the test station and implementation of the control software. The study was also co-funded by the Conselleria de Educacion, ¿ Cultura, Universidades y Empleo (CIACIF/2023/358), through the Programa Operativo del Fondo Social Europeo Plus 2021 2027 (FSE+) of the Comunitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Continuous lipreading based on acoustic temporal alignments

  • Gimeno-Gómez, David|||0000-0002-7375-9515
  • Martínez-Hinarejos, Carlos-D.|||0000-0002-6139-2891
[EN] Visual speech recognition (VSR) is a challenging task that has received increasing interest during the last few decades. Current state of the art employs powerful end-to-end architectures based on deep learning which depend on large amounts of data and high computational resources for their estimation. We address the task of VSR for data scarcity scenarios with limited computational resources by using traditional approaches based on hidden Markov models. We present a novel learning strategy that employs information obtained from previous acoustic temporal alignments to improve the visual system performance. Furthermore, we studied multiple visual speech representations and how image resolution or frame rate affect its performance. All these experiments were conducted on the limited data VLRF corpus, a database which offers an audio-visual support to address continuous speech recognition in Spanish. The results show that our approach significantly outperforms the best results achieved on the task to date., This work was partially supported by Grant CIACIF/2021/295 funded by Generalitat Valenciana and by Grant PID2021-124719OB-I00 under project LLEER (PID2021-124719OB-100) funded by MCIN/AEI/10.13039/501100011033/ and by ERDF, EU A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimizing series hybrid truck performance with synthetic Fuels: From engine testing to vehicle simulation

  • Martínez-Boggio, Santiago Daniel
  • Iñiguez-Barrios, Erasmo Antonio|||0009-0001-9930-7488
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • García Martínez, Antonio|||0000-0001-5783-4936
[EN] Decarbonizing heavy-duty transport requires balancing environmental impact, performance, and feasibility. This study investigates combining a synthetic oxygenated fuel blend (85% diesel, 15% OMEx) with a series hybrid powertrain to cut tailpipe and life-cycle CO2 emissions. Engine tests on a single-cylinder platform explored drop-in, iso-load, and optimized calibrations. The optimized strategy exploited OMEx's oxygen content, reducing soot by over 50% and NOx significantly, while maintaining competitive fuel efficiency. These results were integrated into a vehicle simulation of a medium-duty hybrid truck under regulatory drive cycles. Optimization of battery size and energy management showed that mid-sized packs (similar to 45 kWh) maximize tank-to-wheel CO2 reductions without excessive mass. Life cycle analysis indicated 15-30% CO2 savings for series hybrid, with optimized control outperforming simpler strategies. Compared with diesel, battery-electric trucks halved life-cycle CO2 but required large 300 kWh batteries, increasing weight and limiting range (250 km vs. 700 km). Although Battery Electric Vehicles offer the lowest tailpipe emissions, their mass and infrastructure demands limit short-term applicability. Conversely, hybrids using diesel/OMEx retain conventional range while delivering meaningful CO2 cuts. This integration offers a pragmatic, near-term pathway to decarbonize medium-duty transport until large-scale electrification becomes viable., The author Erasmo Íñiguez acknowledges the financial support from the Conselleria d'Innovació , Universitats, Ciència i Societat Digital de la Generalitat Valenciana under the grant "Subvenciones para la contratación de personal investigador predoctoral (ACIF) " (CIACIF/2022/100) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

48-Hour and 24-Hour Time-lapse Single-nucleus Transcriptomics Reveal Cell-type specific Circadian Rhythms in Arabidopsis

  • Qin, Yuwei
  • Liu, Zhijian
  • Gao, Shiqi
  • Martínez-Vasallo, Carlos
  • Long, Yanping
  • Zhu, Xinlong
  • Liu, Bin
  • Gao, Ya
  • Xu, Xiaodong
  • Xie, Qiguang
  • Zhai, Jixian
  • Nohales, Maria A.
[EN] Functional circadian clock is critical to the adaptation and survival of organisms. In land plants, the comprehensive profiling of circadian gene expression at the single-cell level is largely unknown partly due to the challenges in obtaining precisely-timed single cells embedded within cell walls. To bridge this gap, we employ time-lapse single-nucleus RNA sequencing (snRNA-seq) on Arabidopsis seedlings collected over a 48-hour window at 4-hour intervals, as well as over a 24-hour day at 2-hour intervals, yielding a total of over 77,142 and 130,000 nuclei. Here, we find that four cell clusters in the shoot share a coherent rhythm, while around 3000 genes display cell-type specific rhythmic expression. Our analysis indicates that genes encoding circadian regulators oscillate in multiple cell types, and the majority of them are well-documented core clock genes, suggesting the snRNA-seq circadian data could be used to identify more clock components oscillating in a cell-autonomous way. We identify ABF1 as a circadian regulator, whose overexpression and shortens the circadian period. Our data provides a comprehensive resource for plant circadian rhythmicity at the single-cell level (hosted at https://zhailab.bio.sustech.edu.cn/sc_circadian)., The group of J.Z. is supported by the Biological Breeding-National Science and Technology Major Project (2023ZD04073), National Natural Science Foundation of China (32325031, 32470601), the Program for Guangdong Introducing Innovative and Entrepreneurial Teams (2016ZT06S172); Y.L. is supported by the National Natural Science Foundation of China (32300479), Natural Science Foundation of the Higher Education Institutions of Guangdong Province, China (2022KTSCX115) and Natural Science Foundation of Guangdong Province of China (2023A1515011997); and the National Natural Science Foundation of China to Q.X. (32170259, 31670285) and X.X. (U1904202, 32170275); Central Plains Science and Technology Innovation Leadership Talent Program to X.X. (234200510023); Z.L. is supported by the Fundamental Research Fund for Central Universities (2412023YQ005); M.A.N. is supported by MCIN/AEI/10.13039/501100011033 PID2020-119491GA-I00 (grant PID2020-119491GA-I00) and Generalitat Valenciana (grant CIDEGENT/2020/037). C.M.-V. is the recipient of a predoctoral fellowship from Generalitat Valenciana (CIACIF/2021/329). This work was supported by the Shenzhen Science and Technology Program (Grant No. ZDSYS20230626091659010).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Thread-to-Core Allocation in ARM Processors Buildings Synergistic Pairs

  • Navarro-Edo, Marta|||0000-0002-4334-460X
  • Feliu-Pérez, Josué|||0000-0003-3017-4266
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[EN] Simultaneous multithreading (SMT) processors can present significant throughput improvements over singlethreaded (ST) processors thanks to sharing internal core resources among instructions executing from multiple threads. However, resource sharing introduces inter-thread interference within the core, which negatively impacts individual application performance and can significantly increase the turnaround time of multi-program workloads. The severity of the intra-core interference on performance depends on the applications corunning in the same core. A thread scheduler can help reduce this effect by smartly selecting the pairs of applications that should run on each SMT core. This paper presents SYNPA, a simple approach that dynamically allocates threads to SMT cores based on their run-time dynamic behavior. SYNPA uses a regression model to select synergistic pairs to mitigate intra-core interference. Results show that SYNPA outperforms the default Linux scheduler by around 35%, on average, in terms of turnaround time when running 8- application workloads combining frontend-bound and backendbound applications., This work has been supported by the Spanish Ministerio de Ciencia e Innovacion and European ERDF under grant PID2021-123627OB-C51, TED2021-130233B-C32, and Generalitat Valenciana under grant AICO/2021/266. Marta Navarro is supported by Subvenciones para la contratacion de personal investigador predoctoral by CIACIF/2021/413 . Josue Feliu is supported by the RYC2021-030862-I contract, funded by the MCIN/AEI /10.13039/501100011033 and the European Union NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient CO2 and H2O Co-Electrolysis in a BaZr0.44Ce0.36Y0.2O3o-Based Proton Ceramic Electrochemical Reactor with BaGd0.8La0.2Co2O6-o Steam Electrodes

  • Barrio-Querol, Elena
  • Leonard, Kwati
  • Matsumoto, Hiroshige
  • Quina-García, Imanol
  • Fabuel Robledo, Maria
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Almar-Liante, Laura|||0000-0001-5103-3812
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
[EN] Despite the increasing use of electrification and efforts to decarbonize processes, hydrocarbons remain indispensable for heavy transport and chemistry sectors. Electrochemical devices powered by renewable energy offer a promising strategy to convert CO2 into sustainable molecules that can be used as fuels and chemical feedstocks. In this study, we investigate the electrochemical performance of BaGd0.8La0.2Co2O6-delta as a steam or oxygen electrode in a proton ceramic electrolysis cell. Two composite materials were evaluated as electrode candidates, consisting of BaGd0.8La0.2Co2O6-delta (BGLC) combined with either BaZr0.4Ce0.4Y0.1Yb0.1O3-delta (BZCYYb4411) or BaZr0.5Ce0.3Y0.2O3-delta (BZCY532). The electrodes were characterized using electrochemical impedance spectroscopy (EIS) on symmetrical cells under various oxidizing conditions and temperatures. Based on this analysis, the BGLC-BZCYYb4411 electrode was selected as the steam electrode in a full PCER configuration, composed of Ni-SrZr0.5Ce0.4Y0.1O2.95 (SZCY541) as the fuel/CO2 electrode and BaZr0.44Ce0.36Y0.2O3-delta as the electrolyte. The cell was evaluated for co-electrolysis of H2O and CO2. The results illustrate the potential of the BGLC-based electrodes and BZCY-based electrolytes for efficient CO2 upgrading and steam electrolysis in a single-step process., This study has received European Union Horizon 2020 Research and Innovation funding under Grant 838077 (Project eCOCO2). Financial support from the Spanish Government (Grant CEX2021-001230-S funded by MCIN/AEI/10.13039/501100011033, TED2021-132590B-C21, PRE2019-088857) and the Generalitat Valenciana (Grant CIACIF/2021/199) is also acknowledged. The authors acknowledge the support of the Servicio de Microscopia Electronica of the Universitat Politecnica de Valencia (UPV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental evaluation of the optimal turbocharger system for a multi-cylinder dual-fuel engine towards the operation in transient conditions

  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Marco-Gimeno, Javier|||0000-0002-4815-3714
  • Iñiguez-Barrios, Erasmo Antonio|||0009-0001-9930-7488
[EN] Alternative low-temperature combustion, particularly through dual-mode-dual-fuel (DMDF) concepts, offers promising emission reductions for medium and heavy-duty vehicles, which face challenges in electrification due to payload demands. This technology has shown potential in achieving ultra-low NOx and soot emissions without costly after-treatment systems. However, literature gaps exist in achieving necessary EGR dilution ratios and boost pressures at low speeds with standard turbochargers. This study experimentally evaluates the optimal turbocharger selection for a 7.7 L dual-fuel engine under the DMDF concept. A detailed calibration methodology was used to adjust a new turbocharger to comply with EURO VI emissions standards. Experimental results validated the numerical findings of a previous numerical selection of the prototype turbocharger system, showing improved fuel consumption and air management at low speeds with the new configuration. However, the smaller turbocharger faced limitations impacting emissions at high loads, though the benefits remained significant. Further experimental work explored transient responses under two homologation cycles up to 50 % capacity. These tests demonstrated the new turbocharger's enhanced response, especially when transitioning between loads, indicating improved air intake management. While there were improvements in CO and HC conversion efficiencies, meeting EURO VI standards under dynamic conditions remained challenging, highlighting the need for continued optimization in handling transient responses in dual-fuel engines., The authors thank ARAMCO Overseas Company for supporting this research. The author Erasmo Iniguez acknowledges the financial support from the Conselleria d'Innovacio, Universitats, Ciencia i Societat Digital de la Generalitat Valenciana under the grant "Subvenciones para la contratacion de personal investigador predoctoral (ACIF)" (CIACIF/2022/100)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multiscale numerical modeling of large-format additive manufacturing processes using carbon fiber reinforced polymer for digital twin applications

  • Castelló-Pedrero, Pablo|||0000-0002-6927-6430
  • García-Gascón, César|||0009-0007-6772-0474
  • García Manrique, Juan Antonio|||0000-0001-9507-0746
[EN] Large Format Additive Manufacturing (LFAM) has gained prominence in the aerospace and automotive industries, where topology optimization has become crucial. LFAMfacilitates the layer-by-layer production of sizeable industrial components in carbon fiber (CF) reinforced polymers, however 3D printing at large scales results in warpage generation. Printed components are deformed as residual stresses generated due to thermal gradients between adjacent layers. This paper tackles the problem at two different scales: the micro and macroscale. Initially, the microstructure characterization of the thermoplastic ABS matrix composite material enriched with 20% short CF is used in the development of numerical models to understand the mechanical behavior of the studied material. Numerical modeling is performed simultaneously by means of Mean-Field (MF) homogenization methods and Finite Element Analysis (FEA). Outcomes validated with corrected experimental mechanical testing results show a discrepancy in the elastic modulus of 7.8% with respect to FE multi-layer analysis. Micro-level results are coupled with the a macroscopic approach to reproduce the LFAM process, demonstrating the feasibility of the tool in the development of a Digital Twin (DT)., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work was supported by Generalitat Valencia (GVA) and Spanish Ministry of Science and Innovation. INVEST/2022/131, CIACIF/2021/286, TED2021-130879B-C21 and CIPROM/2022/3.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Micro-Mel and Mini-Mel short life cycle dwarf lines with Solanum anguivi introgressions as the first model varieties for eggplant research and breeding, with potential ornamental applications

  • Martínez-López, Marina|||0000-0003-3678-0400
  • Baraja-Fonseca, Virginia|||0000-0001-9072-4771
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • Vilanova Navarro, Santiago|||0000-0003-4939-9713
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Gramazio, Pietro|||0000-0003-2226-7999
  • García-Fortea, Edgar
[EN] Eggplant (Solanum melongena) research has been hindered by the lack of suitable model plants. The development of Micro-Mel and Mini-Mel, two short-cycle dwarf model lines with introgressions from the wild relative Solanum anguivi, represents a breakthrough in eggplant research. Both lines were characterized using 30 phenotypic descriptors and compared to their parental lines and Micro-Tom. Micro-Mel has determinate growth, early flowering (41.0 days post-transplantation), and physiological fruit maturity at 103.7 days. Mini-Mel is around 3 cm taller, with indeterminate growth, later flowering (57.2 days) and fruit maturity (114.7 days), with a more conventional architecture. Both are significantly shorter than other dwarf eggplants (30 cm at 50 days), reaching only 6.83 cm and 7.93 cm at 60 days. Micro-Mel and Mini-Mel complete three and two and a half full seed-to-seed cycles per year, respectively. Their compact size makes them ideal for space-limited environments, controlled growth chambers, speed breeding, and urban or ornamental horticulture. Whole-genome sequencing (23X coverage) identified 179,653 SNPs between the parental lines, revealing heterozygosity rates of 0.00098% (Micro-Mel) and 0.00123% (Mini-Mel). Micro-Mel and Mini-Mel have 8.50% and 10.79% of their genomes introgressed from S. anguivi, respectively, including 18 shared introgressions. Notably, three orthologues of dwarfism-related genes in tomato (SlDREB1, SlER, and SlSERK1) were identified within these introgressions. The compact, short-cycle nature of Micro-Mel and Mini-Mel accelerates breeding and supports research in genetics, physiology, and cultivar development, while their miniature stature and abundant flowering and fruiting confer them clear ornamental potential., This work was funded from grants PID2021-128148OB-I00 and PID2024-160953OB-I00, funded by MCIN/AEI/10.13039/501100011033/and ERDF/EU, and from grant PDC2022-133513-I00, funded by MICIU/AEI/10.13039/501100011033 and by the EuropeanUnion NextGeneration EU/PRTR. Funding was also received from grant CIPROM/2021/020 funded by Conselleria d'Educacio, Universitats i Ocupacio of the Generalitat Valenciana. MM-L has received a predoctoral grant [FPU21/02288] funded by the Spanish Ministerio de Ciencia, Innovacion y Universidades. VB-F has received a predoctoral grant [CIACIF/2023/238] founded by Conselleria d'Educacio, Cultura, Universitats i Ocupacio (Generalitat Valenciana) . PG has received a postdoctoral grant [RYC2021-031999-I] funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR. Funding for open access charge: Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving Radiology Report Generation Quality and Diversity through Reinforcement Learning and Text Augmentation

  • Parres-Montoya, Daniel
  • Albiol Colomer, Alberto|||0000-0002-1970-3289
  • Paredes Palacios, Roberto
[EN] Deep learning is revolutionizing radiology report generation (RRG) with the adoption of vision encoder--decoder (VED) frameworks, which transform radiographs into detailed medical reports. Traditional methods, however, often generate reports of limited diversity and struggle with generalization. Our research introduces reinforcement learning and text augmentation to tackle these issues, significantly improving report quality and variability. By employing RadGraph as a reward metric and innovating in text augmentation, we surpass existing benchmarks like BLEU4, ROUGE-L, F1CheXbert, and RadGraph, setting new standards for report accuracy and diversity on MIMIC-CXR and Open-i datasets. Our VED model achieves F1-scores of 66.2 for CheXbert and 37.8 for RadGraph on the MIMIC-CXR dataset, and 54.7 and 45.6, respectively, on Open-i. These outcomes represent a significant breakthrough in the RRG field. The findings and implementation of the proposed approach, aimed at enhancing diagnostic precision and radiological interpretations in clinical settings, are publicly available on GitHub to encourage further advancements in the field., Work was partially supported by the Generalitat Valenciana under the predoctoral grant CIACIF/2022/289, with the support of valgrAI-Valencian Graduate School and Research Network of Artificial Intelligence and the Generalitat Valenciana, and cofunded by the European Union.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

SMT Efficiency in Supervised ML Methods: a Throughput and Interference Analysis

  • Pons-Escat, Lucía|||0000-0002-4582-7744
  • Navarro-Edo, Marta|||0000-0002-4334-460X
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Pons Terol, Julio|||0000-0002-5654-6753
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[EN] The microarchitecture of general-purpose processors is continuously evolving to adapt to the new computation and memory demands of incoming workloads. In this regard, new circuitry is added to execute specific instructions like vector multiplication or string operations. These enhancements and the support of multiple threads per core make simultaneous multithreading (SMT) processors dominate the market for data center processors. Regarding emerging workloads, machine learning is taking an important role in many research domains like biomedicine, economics, and social sciences. This paper analyzes the efficiency of machine learning workloads running in SMT mode (two threads per core) versus running them in ST mode (single-threaded) with twice the number of cores. Experimental results in an Intel Xeon Skylake-X processor show an SMT efficiency falling between 80% and 100% across the studied workloads. These results prove two main findings: i) last-generation SMT processors are excellent candidates to execute ML workloads as they achieve a high SMT efficiency, and ii) if the performance of two major resources (i.e., FP double operator and core's caches) was boosted, all the workloads would achieve an almost perfect SMT efficiency. Moreover, results show that there is still room to support more threads without adding extra hardware. The discussed findings are aimed at providing insights to design future processors for ML workloads., This work has been supported by the Spanish Ministerio de Ciencia e Innovación and European ERDF under grants PID2021 123627OB-C51 and TED2021 130233B-C32. Marta Navarro is supported by Subvenciones para la contratación de personal investigador predoctoral by CIACIF/2021/413.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Remote Sensor Images and Vegetation Indices to Optimize Rice Yield Analysis for Specific Growth Stages Within Extensive Data

  • Fita-Silvestre, David
  • Franch-Gras, Belen
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • Uris Martínez, Antonio|||0000-0002-2005-2305
  • Castiñeira-Ibáñez, Sergio|||0000-0001-6414-3906
  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
  • San Bautista Primo, Alberto|||0000-0003-4846-6611
[EN] The crop yield in commercial fields is a very important parameter for farmers. The use of Precision Agriculture tools has been shown to improve rice crop yields. One of these tools is remote sensing on satellite platforms. Sentinel-2 provides free data on reflectance at different wavelengths. Focusing on commercial farms, correlations between the yield and satellite reflectance were studied over several years and locations for `JSendra¿ rice crops. Four years of yield maps for 706 ha composed the database. Mid tillering-MT, panicle initiation-PI and grain filling-GF reflectance values and Vegetation Indices (VIs) were used. At MT, correlations with the yield were variable (0.23¿0.70). At PI, correlations with the yield increased in NIR (0.39¿0.85), but the other regions and VIs experienced a decrease. Visible bands and B05 Red Edge were significantly correlated with each other; similarly, B08 NIR was highly correlated with B06, B07, and B8A; SWIR bands were correlated with each other but not with the yield. At GF, the previous pattern was similar. Substantial limitations in estimating yield variability directly from reflectance or VIs were discussed. Two periods were established. The first is designing strategies to increase NIR and decrease red reflectance from MT to PI. The second is avoiding the relationship between crop greenness and NIR from PI to harvest. NIR was a better variable than VIs, but the single use of this band is challenging. Future recommendations focus on the visible¿NIR collinearities to interpret differences between years or locations., This research has been funded by the PREDIC-PRO project SCPP2100C008733XV0 (CPP2021-008733) of the State Research Agency of the Ministry of Science, Innovation and Universities, and ACIF Generalitat Valenciana, European Union (European Social Fund. Investing in Your Future) (CIACIF/2021/143).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of the environmental impact of HCNG light-duty vehicles in the 2020-2050 transition towards the hydrogen economy

  • Molina, Santiago|||0000-0001-7879-2421
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
  • López-Juárez, Marcos|||0000-0001-9886-4728
  • Olcina-Girona, Miguel
[EN] As the world intensifies its efforts to reduce the adverse effects of global warming, the shift towards a fully developed hydrogen-based economy is emerging as a core strategy. This transition involves the strategic blending of hydrogen with conventional fossil fuels such as natural gas (HCNG), allowing for adaptation to hydrogen availability. Nevertheless, the environmental impact of HCNG vehicles in realistic scenarios with variable hydrogen content remains unexplored. This study focuses on evaluating the global warming impact of the transition of light-duty passenger cars from CNG to H2 vehicles using HCNG blends from 2020 to 2050 and different realistic scenarios. The results in the present study were obtained through a combination of an experimental testing campaign that allowed obtaining how the performance and emissions of HCNG vehicles change with the H2 content and a life cycle assessment methodology. Based on the findings, the scenario in which hydrogen was mostly produced from SMR-dominant, was found to have the potential to reach and outperform the zero-emission concept due to the utilization of biogas. From the results of this study, the recommended H2 content in HCNG blends that offers low environmental impact while avoiding the overdemand of hydrogen in the short term for the 2020-2030 decade is 25% H2 content, increasing to 50% by 2030, and to 75%-100% during the 2040-2050 decade, thus reaching the transition towards pure-H2 technology that minimizes environmental impact., This research has been partially funded by FEDER and the Spanish Government through project RTI2018-102025-B-I00 (CLEAN-FUEL) . M. Olcina-Girona is partly supported by the grant CIACIF/2021/437 of the "Subvenciones para la contratacion de personal investigador pre-doctoral (ACIF) "of the Conselleria d'Innovacio, Universitats, Ciencia i Societat Digital de la Generalitat Valenciana, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Advanced exergy analysis of a Reverse Brayton cycle using air as working fluid for cryogenic purposes

  • Serrano, J.R.|||0000-0003-0692-3917
  • Dolz, Vicente|||0000-0003-1511-6957
  • Gómez-Vilanova, Alejandro|||0000-0002-6627-7075
  • López-Carrillo, Juan Antonio|||0000-0003-0613-6470
[EN] The global push to reduce greenhouse gas emissions has led to the ban of high global warming potential (GWP) refrigerants in the refrigeration sector, prompting the adoption of low-GWP alternatives. However, as regulations are expected to tighten, technologies like the Reverse Brayton cycles (RBC) are emerging. RBCs can operate with safe fluids and can reach very low temperatures through compressions, regeneration, and expansion, requiring only electricity. This research presents results from an RBC equipped with a radial turbine using natural air (R-729), a hazard-free fluid with zero ozone depletion potential (ODP) and emission potential. The cycle utilizes automotive components, offering a cost-effective, high-tech solution. The study evaluates the cycle COP at a design point and performs an exergetic analysis at 173K. Using a thermal and fluid dynamic model of the cycle, the critical components of the cycle influencing the COP are identified, and potential improvements are explored., The authors want to acknowledge the institution "Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital de la Generalitat Valenciana" and its grant program "Subvenciones para la contratacion de personal investigador de caracter predoctoral" for doctoral studies (CIACIF/2021/404) funded by The European Union; also the institution "Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia" for the funding provided by the research project (PAID-11-22) ". This work has been partially supported by Grant PID2021-123351OB-I00 funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by "ERDF A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of Additive Manufacturing Techniques to Increase Drone Radar Detection Range

  • Maya, Christian
  • Vico-Navarro, Joaquin|||0000-0001-8608-0280
  • Balbastre Tejedor, Juan Vicente|||0000-0003-4434-8095
[EN] The deployment of drones in civil airspaces has increased rapidly in recent years. However, their small radar cross-section hinders detectability by existing surveillance systems. This paper evaluates the feasibility of using additive manufacturing techniques with materials with enhanced electromagnetic properties to increase RADAR drone detectability. The examined methods include the production of propellers and landing gear with additive techniques and metal-doped plastics. Field experiments were performed measuring the radar detection range of an off-the-shelf drone with a 24 GHz RADAR module, and findings indicate that the use of specialized materials for drone manufacturing greatly improves drone detectability, increasing the detection range by a factor of 3.9 without changes to the drone design or inclusion of external electromagnetic reflectors., This research was conducted with funding from the Generalitat Valenciana under an ACIF grant (CIACIF/2021/489) and within the framework of the SPIRIT-UCS project, which has received funding from the and the FSE+ under the reference PID2022-141829OB-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical selection of the optimal turbocharger system for a multi-cylinder dual-fuel engine

  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Marco-Gimeno, Javier|||0000-0002-4815-3714
  • Fogué-Robles, Álvaro
[EN] Alternative low-temperature combustion strategies, such as dual-mode dual-fuel (DMDF) concepts, have emerged as promising solutions for reducing fuel consumption and emissions in medium and heavy-duty vehicles. These vehicles face significant challenges in electrification due to their high payload demands, making combustion-based technologies crucial for decarbonization efforts. The DMDF technology has demonstrated the potential to achieve ultra-low NOx and soot emissions, offering a significant advantage by reducing or eliminating the need for costly after-treatment systems. Moreover, this approach opens up opportunities for integrating alternative fuels, providing a viable pathway toward carbon neutrality in the transportation sector. Despite its advantages, there are still technical challenges, particularly in achieving the necessary exhaust gas recirculation ratios and boost pressures at low engine speeds with conventional turbocharger systems. Highly premixed combustion concepts like the RCCI approach used at partial loads in the DMDF engine require high EGR ratios while maintaining lean combustion, resulting in high boost demand and low exhaust energy, resulting in conditions difficult to match with a turbocharger optimized for conventional diesel applications. These limitations can hinder the full realization of DMDF technology's potential in real-world applications. This study addresses these challenges by evaluating the optimal turbocharger configuration for a 7.7 L dual-fuel engine operating under the DMDF concept. A series of turbocharger configurations were numerically analyzed using a calibrated GT-Power engine model to satisfy the air requirements of the dual-fuel system. A performance-based merit function identified a smaller compressor and turbine configuration as the optimal solution. Numerical results show potential improvements of compressor and turbine efficiencies of up to 5 % on each of the components, resulting in a reduction of up to 0.2 bar in pumping losses throughout most of the engine map and a significant increase in the VGT margin for optimization., The authors thank ARAMCO Overseas Company for supporting this research. The author Erasmo Iniguez acknowledges the financial support from the Conselleria d'Innovacio, Universitats, Ciencia i Societat Digital de la Generalitat Valenciana under the grant "Subvenciones para la contratacion de personal investigador predoctoral (ACIF)" (CIACIF/2022/100).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Spectral Phenological Typologies for Improving Cross-Dataset in Mediterranean Winter Cereals

  • Arizo-García, Patricia|||0000-0002-6725-9098
  • Castiñeira-Ibáñez, Sergio|||0000-0001-6414-3906
  • Ricarte Benedito, Beatriz|||0000-0001-8094-1908
  • San Bautista Primo, Alberto|||0000-0003-4846-6611
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
[EN] Accurate monitoring of crop phenology is essential for precision agriculture and yield forecasting. However, satellite-derived time series often suffer from inherent noise, such as residual atmospheric effects and mixed pixels, as well as a frequent lack of ground-truth data in agriculture. In response, this study proposes an algorithm to define the type of spectral signatures for the principal phenological stages of crops, using them as the foundation for training supervised machine learning classification models. The algorithm was developed using Fuzzy C-Means (FCM) clustering to identify the spectral signature reference groups in winter wheat across the Burgos region (Spain) during the 2020 and 2021 growing seasons. To enhance cluster independence and biological coherence, a multi-step filtering process was implemented, including spectral purity (membership degree, SAM, and SAMder) and temporal coherence filters. The filtered and labeled dataset (80% original Burgos dataset) was used to train supervised classification models (KNN and XGBoost). The models¿ reliability was verified through three wheat tests (remaining 20%), labeled using other clustering techniques, and an independent barley dataset from diverse geographic locations (Valladolid and Soria). The filtering process significantly improved cluster stability by removing outliers and transition spectral signatures. The supervised models demonstrated exceptional performance; the KNN model slightly outperformed XGB, achieving a mean Accuracy of 0.977, a Kappa of 0.967, and an F1-score of 0.977 in the wheat external test. Furthermore, the model showed, when applied to barley, that its phenological spectral signatures are equivalent in shape to those of wheat, with an Accuracy of 0.965 and an F1-score of 0.974. In addition, it was verified that the type spectral signatures remain the same regardless of the location. This study presents a robust classification tool capable of labeling four key phenological stages (tillering, stem elongation, ripening, and senescence) without ground truth. By effectively removing inherent satellite noise, the proposed methodology produces organized, cleaned datasets. This structured foundation is critical for future research integrating spectral signatures with harvester data to develop high-precision yield prediction models., This research was funded by the PREDIC-PRO project SCPP2100C008733XV0 of the State Research Agency of the Ministry of Science, Innovation and Universities, and the ACIF Generalitat Valenciana, European Union (European Social Fund. Investing in Your Future) grant number CIACIF/2022/255.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancing UAS Integration in Controlled Traffic Regions Through Reinforcement Learning

  • Vico-Navarro, Joaquin|||0000-0001-8608-0280
  • Vila Carbó, Juan Antonio|||0000-0001-8330-8286
[EN] Controlled Traffic Regions (CTRs) around major airports pose an important challenge to Unmanned Aerial System (UAS) traffic management. Current regulations highly restrict UAS missions in these areas by confining them to segregated areas. This paper makes a proposal to allow more ambitious UAS missions inside CTRs, such as paths across the CTR or between heliports inside the CTR, based on self-separation. This proposal faces two important problems: on the one hand, the adaptive response to the dynamic airspace reconfiguration of a CTR without necessarily terminating the flight, and on the other, a self-managed conflict resolution that allows maintaining traffic separations without the intervention of air traffic controllers. This paper proposes a solution named Reinforcement Learning Multi-Agent Separation Management (RL-MASM). It employs a multi-agent reinforcement learning system with a fully decentralized decision-making scheme, although it uses a common information source of the environment. The proposed system is evaluated against classical control algorithms for obstacle avoidance to determine the potential benefits of AI-based methods. Results show that AI-based methods can benefit from knowing the intent of a UAS. This leads to increased performance in intrusions into no-fly zones or collisions, and also solves some challenging scenarios for classical control algorithms. From the aeronautical point of view, the proposed solution also introduces important advantages in terms of efficiency, scalability, and decentralization., This research was conducted with funding from Generalitat Valenciana under an ACIF grant (CIACIF/2021/489). Funding for open access charge: Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Boosting pro-vitamin A content and bioaccessibility in leaves by combining engineered biosynthesis and storage pathways with high-light treatments

  • Morelli, Luca
  • Reig-Lopez, Diego
  • Di, Xueni
  • Llorente, Briardo
  • Pérez-Colao, Pablo
  • RODRIGUEZ-CONCEPCION, Manuel|||0000-0002-1280-2305
[EN] Biofortification of green leafy vegetables with pro-vitamin A carotenoids, such as beta-carotene, has remained challenging to date. Here, we combined two strategies to achieve this goal. One of them involves producing beta-carotene in the cytosol of leaf cells to avoid the negative impacts on photosynthesis derived from changing the balance of carotenoids and chlorophylls in chloroplasts. The second approach involves the conversion of chloroplasts into non-photosynthetic, carotenoid-overaccumulating chromoplasts in leaves agroinfiltrated or infected with constructs encoding the bacterial phytoene synthase crtB, leaving other non-engineered leaves of the plant to sustain normal growth. A combination of these two strategies, referred to as strategy C (for cytosolic production) and strategy P (for plastid conversion mediated by crtB), resulted in a 5-fold increase in the amount of beta-carotene in Nicotiana benthamiana leaves. Following several attempts to further improve beta-carotene leaf contents by metabolic engineering, hormone treatments and genetic screenings, it was found that promoting the proliferation of plastoglobules with increased light-intensity treatments not only improved beta-carotene accumulation but it also resulted in a much higher bioaccessibility. The combination of strategies C and P together with a more intense light treatment increased the levels of accessible beta-carotene 30-fold compared to controls. We further demonstrated that stimulating plastoglobule proliferation with strategy P, but also with a higher-light treatment alone, also improved beta-carotene contents and bioaccessibility in edible lettuce (Lactuca sativa) leaves.; Biofortification of leaves and other green tissues with pro-vitamin A carotenoids such as beta-carotene still remains challenging mostly due to the negative impact that altering carotenoid contents may have in photosynthesis. Here, we combined extraplastidial production and artificial chromoplast differentiation together with chemical (hormones) and physical (high-light) treatments to boost the beta-carotene contents of leaves while improving bioaccessibility, using Nicotiana benthamiana as the test system and lettuce (Lactuca sativa) as the crop model. image, We thank Trine B. Andersen and Jose A. Daros for materials, Jose Luis Micol for the ron1-2 mutant, Felix Kessler for the vte1 mutant, Alberto Coronado-Martin for help with protoplast isolation, and M. Rosa Rodriguez, Jose Perez-Beser and the staff at the IBMCP Metabolomics Platform for technical support. We also thank the Microscopy Section at the University of Valencia SCSIE and Maria T. Minguez for her specialized support with electron microscopy. This work was funded by grants from Spanish MCIN/AEI/10.13039/501100011033 and European NextGeneration EU/PRTR and PRIMA programs to MR-C (PID2020-115810GB-I00 and UToPIQ-PCI2021-121941). MR-C is also supported by Generalitat Valenciana (PROMETEU/2021/056 and AGROALNEXT/2022/067) and the MCIN/AEI-funded Spanish Carotenoid Network, CaRed (RED2022-134577-T). BL acknowledges the support of the Gordon and Betty Moore Foundation (GBMF9319, grant DOI: ), the ARC Centre of Excellence for Synthetic Biology, Twist Bioscience, and the Allen Foundation. LM and PP-C received predoctoral fellowships from La Caixa Foundation (INPhINIT program LCF/BQ/IN18/11660004) and Generalitat Valenciana (CIACIF/2021/278), respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cyclosporin A-loaded dissolving microneedles for dermatitis therapy: Development, characterisation and efficacy in a delayed-type hypersensitivity in vivo model

  • Martínez-Navarrete, Miquel
  • Guillot, Antonio Jose
  • Lobita, Maria C.
  • Recio, Maria Carmen
  • Giner, Rosa
  • Aparicio-Blanco, Juan
  • Montesinos-Mezquita, María Carmen
  • Santos, Helder A.
  • Melero, Ana
[EN] Several drugs can be used for treating inflammatory skin pathologies like dermatitis and psoriasis. However, for the management of chronic and long-term cases, topical administration is preferred over oral delivery since it prevents certain issues due to systemic side effects from occurring. Cyclosporin A (CsA) has been used for this purpose; however, its high molecular weight (1202 Da) restricts the diffusion through the skin structure. Here, we developed a nano-in-micro device combining lipid vesicles (LVs) and dissolving microneedle array patches (DMAPs) for targeted skin delivery. CsA-LVs allowed the effective incorporation of CsA in the hydrophilic DMAP matrix despite the hydrophobicity of the drug. Polymeric matrix composed of poly (vinyl alcohol) (5% w/v), poly (vinyl pyrrolidine) (15% w/v) and CsA-LV dispersion (10% v/v) led to the formation of CsA-LVs@DMAPs with adequate mechanical properties to penetrate the stratum corneum barrier. The safety and biocompatibility were ensured in an in vitro viability test using HaCaT keratinocytes and L929 fibroblast cell lines. Ex vivo permeability studies in a Franz-diffusion cell setup showed effective drug retention in the skin structure. Finally, CsA-LVs@DMAPs were challenged in an in vivo murine model of delayed-type hypersensitivity to corroborate their potential to ameliorate skin inflammatory conditions. Different findings like photon emission reduction in bioluminescence study, normalisation of histological damage and decrease of inflammatory cytokines point out the effectivity of CsA-LVs@DMAPs to treat these conditions. Overall, our study demonstrates that CsA-LVs@DMAPs can downregulate the skin inflammatory environment which paves the way for their clinical translation and their use as an alternative to corticosteroid-based therapies., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This publication is part of the grants PID2020-114530GA-I00 (to A.M.) and PID2021-124890OB-I00 (to M.C.M.) funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", by the "European Union". H.A.S. acknowledges financial support from the UMCG Research Funds and the Academy of Finland (grant no. 331151). M.M-N acknowledges the financial support from ACIF grant funded by Generalitat Valenciana; Conselleria d'Innovacio, Universitats, Ciencia i Societat Digital (ref: CIACIF/2022/341). A.J.G. acknowledges the financial support from "Margarita Salas" grant (ref: MS21-126) funded by the Spanish Ministry of Universities and European Union (Next generation-EU).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effects of phage-based treatments against an OXA-48-producing Klebsiella pneumoniae isolate in simulated human gut microbiomes

  • Ferriol-González, Celia
  • Hernanz-Grimalt, Ana
  • Valdivia, Carlos
  • García-Cobos, Silvia
  • Domingo-Calap, Pilar
  • Heredia Gutiérrez, Ana Belén|||0000-0001-6629-9779
  • García Hernández, Jorge|||0000-0003-1258-6128
  • Andrés Grau, Ana María|||0000-0002-6132-3167
[EN] Background: Carbapenem-resistant K. pneumoniae (CRKP) is one of the most prevalent antimicrobial-resistant pathogens, primarily causing nosocomial infections. These bacteria often colonize the gut microbiota, and their carriage is an important risk factor for later infection. Phages are an emerging alternative against antimicrobial-resistant bacteria causing infections, but their effect on the microbiota is still poorly understood. Results: Here, we simulated the colonization of the gut microbiota of three healthy adults by an OXA-48-producing CRKP isolate in a dynamic in vitro colonic simulator (SHIME (R)) and evaluated the effect of phage treatments in reducing CRKP load. Phage growth dynamics in the system seemed to be dependent on phage host range, rather than the donor's microbiota composition. Additionally, phage treatment significantly reduced K. pneumoniae load and bla(OXA-48) copy number, highlighting its potential for controlling the CRKP population. Importantly, phage treatment did not affect the microbiota diversity of any of the three donors, suggesting it has a minimal impact on the microbiome. Conclusions: Our results support the potential of phage-based strategies for the biocontrol of CRKP in the gut microbiota, reducing the abundance of this pathogen in its main reservoirs and preventing nosocomial CRKP infections., This research was funded by project PID2023-150309OB-I00 (Ministerio de Ciencia, Innovacion y Universidades) awarded to P.D.-C. C.F.-G., A.H.-G., and C.V. were funded by PhD fellowships Atraccio de Talent UV-INV_PREDOC-1913324 (Universitat de Valencia), Proyectos de I + D + i Retos Investigacion PREP2023-001677 (Ministerio de Ciencia, Innovacion y Universidades), and CIACIF/2023/126 (Generalitat Valenciana), respectively. P.D.-C. was financially supported by a Ramon y Cajal contract RYC2019-028015-I funded by MCIN/AEI/https://doi.org/10.13039/501100011033, ESF Invest in your future. Written informed consent was obtained from three donors who were rigorously informed about the aims and procedures of this study and consented to participate.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Synthesis of anodized WO3 nanocatalysts using Melia azedarach leaves extract for energetic applications [Dataset]

  • Fernández Domene, Ramón Manuel
  • Solsona Espriu, Benjamin Eduardo
  • Erans Moreno, María
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Sánchez Tovar, Rita
This study reports the bio-mediated synthesis of tungsten trioxide nanostructures from aqueous extracts of Melia azedarach (L.) dry leaves. The synthesis was carried out by electrochemical anodization of tungsten foils in the presence of different volume percentages of leaves extracts. These nanostructures were afterwards characterized by X-Ray Diffraction (XRD), impedance measurements and linear sweep voltammetry in the presence of simulated solar light. Finally, these nanoelectrodes were used as (photo)electrocatalysts in the photoelectrochemical water splitting process to obtain green hydrogen and as anodes in Li-ion rechargeable batteries. Description of methods used for collection/generation of data: - Synthesis of WO3 nanostructures: The leaves of M. azedarach were randomly sampled from several mature trees from the surroundings of the Burjassot Campus of the University of Valencia (Spain). Fresh leaves were rinsed with tap and distilled water and subsequently air-dried indoors for 1 week, at room temperature. The extracts were obtained from dried leaves, by mixing 15 g of material with 150 mL of distilled water at 60 ºC. The infusion was maintained at that temperature for 20 min. After that, the solution, once cooled, was filtered through filter paper and used to prepare the different reaction media. Nanostructures of WO3 were synthesized by subjecting tungsten foils (1,3 cm2 of exposed area) to an anodization process with a cell potential of 20 V, for 4 h. A platinum foil served as the cathode within the cell. The anodization process employed an aqueous electrolyte composed of 1.5 M methanesulfonic acid (MSA) with varying proportions of M. azedarach leaves extract (from 0% to 10%, in volume), at a temperature of 50◦C. Anodization was performed under controlled hydrodynamic conditions, by means of a Rotating Disk Electrode (RDE) set a constant rotation speed of 750 rpm. Following anodization, a thermal treatment (annealing) was carried out in a tubular oven at 600◦C for 4 h in an air atmosphere to obtain crystalline WO3 nanostructures. - Morphological and structural characterization: X-Ray diffraction analyses (XRD) were performed to investigate the crystallinity of the WO3 samples. A D8AVANCE diffractometer (Bruker) equipped with a monochromatic Cu Kα1 source was used. -(Photo)electrochemical characterization: impedance measurements and photocurrent density vs potential curves: Electrochemical characterization of the WO3 nanostructures was conducted through impedance measurements, performing Electrochemical Impedance Spectroscopy (EIS) and Mott-Schottky (MS) analyses. All electrochemical tests were carried out using a three-electrode cell with the nanostructures acting as working electrodes, a silver/silver chloride (3 M KCl) electrode was the reference electrode and a platinum tip served as counterelectrode. Measurements were performed with a PalmSens4 potentiostat and 0.1 M H2SO4 was used as electrolyte. The sample area exposed to that electrolyte was 0.5 cm2. For EIS, a constant potential of 1 V was selected with an amplitude of 10 mV, scanning the frequency from 100 kHz to 10 mHz. For MS analysis, a constant frequency of 5 kHz was used, while the potential was scanned from 1 V to 0.2 V at a rate of 50 mV/s. For the photoelectrochemical characterization of the WO3 nanostructures, the same experimental set-up was used, with the addition of a solar simulator with AM 1.5 conditions (100 mW/cm2). Linear voltammetries to obtain photocurrent density – potential curves were conducted from 0.2 V to 1.05 V, by applying dark-light pulses (16 s in the dark followed by 4 s with illumination) while the potential was scanned. - Evaluation of WO3 nanostructures as Li-ion battery anodes: WO3 nanostructures were evaluated as anodes (negative electrodes) for Li-ion batteries. For that purpose, Swagelok-type cells were used, with WO3 nanostructures acting as working electrodes and a metallic lithium foil acting as both the counter and the reference electrodes. Batteries were assembled inside an Ar-filled glove box, using 1 M LiPF6 in ethylene carbonate/dimethyl carbonate/diethyl carbonate 1:1:1 (v/ v/v) as electrolyte (Sigma-Aldrich) and a Whatman glass microfiber separator. After sealing the cells, they were cycled outside the glove box at room temperature, using a Biologic BCS-815 cyclic station. Galvanostatic charge/discharge curves were recorded at different cycling rates (from C/10–1 C, and returning to C/10) within a potential window between 1 V and 3.5 V vs Li/Li+.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development and Characterization of Ductile Polylactic Acid Blends with Plasticized Zein for Injection Molding Applications

  • Lázaro-Hernández, C.|||0009-0002-8250-9363
  • Mario Nicolás
  • Vicente-Vinas, Maria del Puig|||0009-0005-0024-1503
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
[EN] This study explores the development of polylactic acid (PLA) blends incorporating plasticized zein, a corn-derived protein, and dipropylene glycol (DPG) as a biobased plasticizer to enhance compatibility and processability. Blends were produced via twin-screw extrusion and injection molding, with plasticized zein content ranging from 10 to 50 wt%. Mechanical testing showed a significant increase in ductility, with elongation at break rising from 6.3% (neat PLA) to 56.3% (50 wt% zein), accompanied by reduced tensile strength (58.4 MPa to 22.7 MPa) and impact resistance (42.2 kJ/m2 to 11.5 kJ/m2), due to phase separation and limited compatibility. Shore D hardness slightly declined (from 82.9 to 77.4). Thermal analysis revealed the Tg decreasing from 59.5 °C to 39.9 °C as zein content increased. Thermogravimetric analysis showed reduced thermal stability with zein addition, dropping the initial degradation temperature from 360.0 °C to 188.2 °C. Morphological analysis indicated greater heterogeneity at higher zein levels due to partial miscibility. Colorimetric data showed visible changes, and FTIR spectra confirmed physical interactions and partial miscibility between PLA and zein., This research is a part of the grant PID2023-152869OB-C22, and the grant TED2021-131762 A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. The authors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. C. Lazaro-Hdez thanks Generalitat Valenciana - GVA for funding a predoc position through the CIACIF program co-funded by ESF Investing in your future, grant number CIACIF/2023/244. M. Miranda-Pinzon thanks Vice-rectorate for Research of the Universitat Politècnica de València (UPV) for funding a predoctoral contract in the PAID-01-24 program. J. IvorraMartinez thanks Generalitat Valenciana - GVA for funding a postdoc position through the CIAPOS program co-funded by ESF Investing in your future, grant number CIAPOS/2023/362. Microscopy services at UPV are also acknowledged for their help in collecting and analyzing FESEM images. Funding for open access charge: CRUE-Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Selective lignin conversion via flow photocatalysis for vanillin and bioplasticizers production

  • Marset, Xavier
  • Montilla-Verdú, Salvador
  • Pastor, Francisco J.
  • Rico, Elio
  • Bertella, Stefania
  • Ortuño, Manuel A.
  • Aschauer, Ulrich
  • Guijarro, Néstor
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Mario Nicolás
  • Lázaro-Hernández, C.|||0009-0002-8250-9363
  • Balart, Rafael|||0000-0001-5670-7126
[EN] Lignin valorization remains a roadblock in the development of green biorefineries. Currently, depolymerization strategies predominantly depend on energy- and resource-intensive thermochemical methods, while potential applications of the resulting bio-based products are often overlooked. Here, we show a scalable photocatalytic flow reactor for lignin deconstruction that operates at ambient conditions, along with a downstream process that yields commercially viable products at gram scale. An anthraquinone-based photocatalytic platform, when packed in a flow bed reactor, is demonstrated to selectively and nearly quantitatively cleave lignin¿s ß-O-4 moieties, achieving a benchmark yield of 7.1¿wt% for vanillin. The utilization of residual oligomers as plasticizers for biobased polylactic acid resulted in improved mechanical properties and shape memory effects, while maintaining its suitability for conventional 3D printing. This aldehyde-oriented platform represents a key advancement that complements existing ketone-oriented photocatalytic approaches targeting valuable chemicals from lignin conversion, and it ultimately contributes to the holistic utilization of lignin., This research is a part of the grant PID2023-152869OB-C22, and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. The authors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. J. G.-C. wants to thank FPU20/01732 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. M.M.-P. thanks Vice-rectorate for Research of the Universitat Politècnica de València (UPV) for funding a predoctoral contract in the PAID-01-24 program. M.A.O. thanks the Ramon y Cajal Program (RYC2022-035453-I) funded by MICIU/AEI/10.13039/501100011033 and FSE + . C.L.-H. wants to thank CIACIF/2023/244 grant funded by Generalitat Valenciana GVA. U.A thanks the supercomputer resources provided by the Vienna Scientific Cluster (VSC). N.G. thanks the Ramon y Cajal Program (RYC2018-023888-I) funded by MCIN/AEI/ 10.13039/501100011033. The authors also thank the support of the Generalitat Valenciana/FEDER (Spain) through the project IDIFEDER/2020/002. This research is also part of the project PID2021-128805NA-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. This project has received funding from the European Research Council (ERC) under the European Union s Horizon 2020 research and innovation programme (grant agreement no. 948829).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Plasma fibroblast activation protein is decreased in acute heart failure despite cardiac tissue upregulation

  • Delgado-Arija, Marta
  • Genovés, Patricia
  • Pérez-Carrillo, Lorena
  • González-Torrent, Irene
  • Giménez-Escamilla, Isaac
  • Martínez-Dolz, Luis
  • Portolés, Manuel
  • Tarazón, Estefanía
  • Roselló-Lletí, Esther
[EN] Background Cardiac fibroblast activation protein (FAP) has an emerging role in heart failure (HF). A paradoxical reduction in its levels in pathological conditions associated with acute processes has been observed. We aimed to identify FAP cardiac tissue expression and its relationship with the main cardiac fibrosis-related signaling pathways, and to compare plasma FAP levels in acute and chronic HF patients. Methods Transcriptomic changes were assessed via mRNA/ncRNA-seq in left ventricle tissue from HF patients (n¿=¿57) and controls (n¿=¿10). Western blotting and immunohistochemistry were used to explore FAP protein levels and localization in cardiac tissue. ELISA was performed to examine plasma FAP levels in acute HF (n¿=¿48), chronic HF (n¿=¿15) and control samples (n¿=¿7). Results FAP overexpression in cardiac tissue is related to the expression of molecules directly involved in cardiac fibrosis, such as POSTN, THBS4, MFAP5, COL1A2 and COL3A1 (P¿<¿0.001), and is directly and inversely related to pro- and antifibrotic microRNAs, respectively. The observed FAP overexpression is not reflected in plasma. Circulating FAP levels were lower in acute HF patients than in controls (P¿<¿0.05), while chronic HF patients did not show significant changes. The clinical variables analyzed, such as functional class or etiology, do not affect plasma FAP concentrations. Conclusions We determined that in HF cardiac tissue, FAP is related to the main cardiac fibrosis signaling pathways as well as to pro- and antifibrotic microRNAs. Additionally, an acute phase of HF decreases plasma FAP levels despite the upregulation observed in cardiac tissue and regardless of other clinical conditions., This work was supported by the National Institute of Health Fondo de Investigaciones Sanitarias del Instituto de Salud Carlos III [Projects: PI20/01469 and PI20/00071 co-funded by European Union; Miguel Servet contracts: CP18/00145 co-funded by European Union, European Social Fund (ESF) The ESF invests in your future and CP21/00041 co-funded by European Union; contract FI21/00186 and FI21/00034]; Consorcio Centro de Investi&#8209; gación Biomédica en Red [CIBERCV, under Grant CB16/11/00261]; Ministry of Universities and the European Recovery, Transformation and Resilience Plan (PRTR, Next Generation EU) [ Ayuda Margarita Salas para la formación de jóvenes doctores : contract: MS21-162]; Ministry of Science and Innovation (MCIN, 10.13039/501100011033) and State Investigation Agency (AEI) [Project CNS2022-135769] co-funded by European Union Next Generation EU and PRTR; Conselleria de educación, universidades y empleo [Project CIA&#8209; ICO/2022/246, contract CIACIF/2022/429].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Toward AI-Assisted Greener Chiral HPLC: Predicting Efficient Enantioseparation-Mobile Phase (EES-MP) Profiles for MP Selection-A Lux Cellulose-1 Case Study

  • Pardo-Cortina, Carlos
  • Escuder-Gilabert, Laura
  • Medina-Hernandez, Maria Jose
  • Sagrado Vives, Salvador
  • Martin-Biosca, Yolanda
[EN] Chiral HPLC method development still relies heavily on trial-and-error screening. We introduce the Efficient Enantioseparation (EES) parameter-a single metric integrating resolution (Rs) and retention (k)-to move from point predictions to full mobile-phase (MP) profile modeling. Using EES as the response, we trained multiple artificial neural networks (ANNs) on 62 variables (molecular descriptors) and 76 objects (structurally diverse neutral and basic compounds chromatographed on a Lux Cellulose-1 column under aqueous-acetonitrile conditions at nine MP compositions). ANNs were optimized with a chaotic competitive-learning optimizer (CCLNNA), then ranked/selected and combined into a consensus model to enhance robustness and limit overfitting. The ANN-consensus model accurately reproduces full EES-MP profiles (R-2 > 0.9) with lower error dispersion, enabling prospective feasibility checks and single-shot selection of high-EES mobile-phase compositions. External tests on fluoxetine and lormetazepam confirmed prospective utility by anticipating separability at one or more MPs (nominating the MP with maximal EES) or nonseparability across the explored MP range. To our knowledge, this work provides the first proof-of-concept for in silico prediction of full EES-MP profiles in chiral HPLC, enabling intelligent MP selection. Rather than a definitive model, this work evaluates the potential of the strategy: consensus stabilizes learning with limited data and offers greener, actionable guidance that can reduce experiments, reagent consumption, and development time. The framework is extensible to broader chemotypes and stationary and mobile phases; larger data sets could further generalize EES-profile prediction and support intelligent MP selection in sustainable chiral HPLC., The authors acknowledge the Spanish Ministerio de Ciencia, Innovacion y Universidades and the European Regional Development Fund (ERDF) for the financial support (Project PID2023-152340NB-I00, MCIU/AEI/10.13039/501100011033/FEDER, UE). Carlos Pardo-Cortina is grateful to Generalitat Valenciana and European Social Fund Plus for the financial support provided through his predoctoral research contract (CIACIF/2024/356).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nanoparticles of non-porphyrinic covalent organic frameworks as contrast agents for photoacoustic imaging

  • Pi-Martín, Irene
  • VIDAURRE-AGUT, CARLA
  • Rivero-Buceta, Eva María
  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • García-Garrigos, Juan José
  • Jimenez, Noe|||0000-0002-6539-670X
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • BOTELLA ASUNCION, PABLO|||0000-0003-2141-3069
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
[EN] Photoacoustic imaging (PAI) is an emerging biomedical modality offering non-invasive, high-resolution imaging with molecular contrast. Its effectiveness for molecular imaging is improved by using external contrast agents such as dyes and nanostructures, which enable targeted imaging, deeper tissue penetration, and enhanced diagnostic accuracy. However, the clinical translation of these agents has been hindered by limitations in biocompatibility, biodegradability, and functionalization versatility. In this study, two porphyrin-free nanoscale covalent organic frameworks (nCOFs), TAPB-PDA and LZU1, were evaluated as novel exogenous contrast agents for PAI. Their photoacoustic responses were systematically measured and compared with traditional contrast agents, such as gold nanoparticles (AuNPs) and ATTO532-labelled mesoporous silica nanoparticles. Experiments at 532 nm across a range of concentrations demonstrated strong photoacoustic signals from TAPB-PDA and LZU-1, with enhanced response at higher concentrations. Besides, both nCOFs also provided detectable signals at the NIR window at the lowest concentration, indicating a broad working range. A nonlinear model of the volume-integrated photoacoustic pressure is also provided. Furthermore, in vitro cytotoxicity assays indicated excellent nCOF biocompatibility, even at higher concentrations. Photostability tests under prolonged pulsed laser irradiation revealed that both nCOFs exhibit good resistance to photobleaching and partial signal recovery under intermittent excitation. Collectively, these findings highlight the potential of TAPB-PDA and LZU-1 nCOFs as biocompatible, biodegradable, and functionally versatile contrast agents for advanced photoacoustic imaging., This work has been supported by the Agencia Estatal de Investigación (AEI, projects PID2019111436RBC22 and PID2022142952OB-100), Generalitat Valenciana through the programs Equipamiento e Infraestructuras FEDER 2021-22 IDIFEDER/2021/004, and Programa de Garantía Juvenil I+D EDGJID/2021/189, and NextGenerationEU Recovery and Resilience Facility (RRF) through the PTI+ Global Health Platform of Spanish National Research Council (grant SGL2103023). N. Jiménez is grateful for financial support from the Spanish Ministry of Science, Innovation and Universities (MICIU) through grants Juan de la Cierva Incorporación , IJC2018- 037897-I, and Ramón y Cajal RYC2021-034920-I. A. Cebrecos is grateful for financial support from Universitat Politècnica de València through programs PAID-10-19, PAID-PD-22. Irene Pi is grateful for financial support from program CIACIF/2021/403 of Generalitat Valenciana. In addition, financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Personalized Multimodal AI and AR System for Remote Cognitive Assistance in Aging-in-Place

  • Ferri-Molla, Isabel|||0009-0008-3608-9891
  • Linares-Pellicer, Jordi|||0000-0002-3315-1716
  • Aliaga-Torro, Carlos|||0009-0001-0426-886X
  • Izquierdo-Domenech, Juan|||0000-0003-0076-7001
[EN] The progressive aging of the global population increases the prevalence of mild cognitive impairment (MCI), challenging healthcare systems to support functional independence in daily activities at home. This work presents a privacy-preserving assistive system that integrates multimodal AI with lightweight augmented reality to deliver personalized, step-by-step guidance for instrumental activities of daily living. The architecture orchestrates speech recognition, Retrieval-Augmented Generation, and computer vision through Large Language Models and Vision¿Language Models to provide contextualized assistance. A key contribution is an adaptive closed-loop interaction mechanism that estimates task progress from visual feedback, verifies step completion through VLM-based action recognition, and dynamically adjusts guidance pacing. To increase data protection, raw audio¿visual streams are processed locally at the edge for transcription and verification, while only textual metadata are transmitted to the cloud for high-level reasoning and speech synthesis. A feasibility study with older adults aged 59 to 87 years performing tasks in unfamiliar environments demonstrated that the experimental group required significantly fewer assistance requests than controls, 2.50 vs. 4.43 with p <.001 and |g|=2.14, and reported high satisfaction of 4.48 out of 5. These results provide preliminary evidence of the system¿s feasibility as a framework for cognitive assistance and its potential integration into personalized home healthcare workflows., This work was supported in part by the Generalitat Valenciana under Grant CIACIF/2022/098, Grant CI-PROM/2021/077, and Grant FPU24/02705.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Catalytic activation of N2O on promoted NiO based materials: Valorization by oxidative dehydrogenation of ethane

  • Sánchez-García, G.
  • Pérez-Calvo, A.
  • Sánchez-Tovar, R.
  • Dejoz, A.M.
  • Solsona, B.
  • Moreno-Torralbo, Beatriz Maria
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] N2O-assisted Oxidative Dehydrogenation (ODH) of ethane is an interesting way of simultaneously obtaining a highly valuable raw material (ethylene) and the functionalization of a greenhouse gas (N2O). Unfortunately, over most of the catalytic systems, this reaction presents two main drawbacks: i) high yields to ethylene have hardly been reported; and ii) the catalytic activity highly decreases when replacing molecular oxygen by N2O. In the present article, it will be shown that with promoted NiO catalysts, and using N2O, high activity, comparable with that of conventional O2-assisted ODH of ethane, is achieved. Furthermore, the use of the appropriate dopant, such as niobium, allows high ethylene yields (40 %), with a selectivity to ethylene of 72 % at 55 % ethane conversion. Overall, the catalytic results obtained indicate that the presence/absence and the nature of the promoter determines the catalytic performance of NiO based catalysts and the selectivity to ethylene can be explained on the basis of the electrochemical properties of the catalysts, correlating with parameters such as the density of acceptor defects (cationic vacancies) and the charge-transfer resistance at the interfacial active sites of the catalysts. Interestingly, the most selective catalyst (i.e., Nb-doped NiO) is highly robust as it presents stable catalytic performance after 24 h online and Ni2+ species are not reduced to Ni0 even working at high temperatures in N2O-free conditions., The funding received for this study from the Spanish Ministry of Science and Innovation, projects PID2021-126235OB-C31 and PID2021-126235OB-C33 (funded by MCIN/AEI/10.13039/501100011033 and FEDER funds) and projects TED2021-130756B-C31 and TED2021-129555B-I00 (funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union NextGenerationEU/PRTR) , is acknowledged. BMT, PC, and JMLN also thank CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033. G. Sanchez-Garcia is also grateful to the Generalitat Valenciana (CIACIF/2021/010) and A. Perez-Calvo to Ministerio de Ciencia, Innovacion y Universidades (FPU23/02557) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of deposition time per layer in large format additive manufacturing with glass fiber reinforced ABS

  • Castelló-Pedrero, Pablo|||0000-0002-6927-6430
  • García-Gascón, César|||0009-0007-6772-0474
  • Javier Bas-Bolufer
  • García Manrique, Juan Antonio|||0000-0001-9507-0746
  • Alabort-Martínez, Carles
[EN] This paper presents a parametric study of layer adhesion in Large Format Additive Manufacturing (LFAM) applications using glass fiber (GF) reinforced acrylonitrile butadiene styrene (ABS). The study focuses on the deposition time per layer (tL) and includes an innovative approach to monitor temperature variation throughout the printing process using an infrared camera. The paper provides a detailed account of the sample fabrication process and experimental tensile tests. Specifically, this study shows how lower times per layer yield better mechanical properties as material is deposited over hotter layers, resulting in smaller thermal gradients, hence better layer adhesion and reduced warpage., This work was supported by Generalitat Valencia (GVA) and Spanish Ministry of Science and Innovation. INVEST/2022/131, CIA-CIF/2021/286, TED2021-130879B-C21 and CIPROM/2022/3
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effects of Thermal Annealing on the Structure Properties Relationship of Plasticized Polylactic Acid with Citrates

  • Lázaro-Hernández, C.|||0009-0002-8250-9363
  • Mario Nicolás
  • Balart, Rafael|||0000-0001-5670-7126
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
[EN] This study investigates the effect of annealing on neat polylactic acid (PLA) and PLA plasticized with 20 wt% triethyl citrate (TEC) and acetyl tributyl citrate (ATBC), processed by twin-screw extrusion followed by injection molding. Two annealing treatments were applied at a lower temperature (T1-located at 10% above the onset of cold crystallization) and a higher temperature (T2- located at 10% below the endset of cold crystallization). The employed temperatures were provided by a calorimetric pre-study to assess the crystallization behavior. Mechanical characterization showed that annealing increased stiffness and brittleness, as indicated by a reduction in elongation at break from 276.7% (T0-without annealing treatment) to 53.7% (T2) for plasticized PLA with 20 wt% TEC, and an increase in tensile strength from 17.3 MPa (T0) to 25.1 MPa (T2). Charpy impact testing revealed higher energy absorption in T1, while surface hardness improved after annealing, with Shore D values for PLA increasing from 78.2 (T0) to 82.0 (T1). Thermal analysis demonstrated that annealing suppressed cold crystallization and substantially increased crystallinity, in PLA plasticized with 20 wt% ATBC rising from 34.1% (T0) to 65.3% (T2), without significantly affecting thermal stability. Plasticization reduced the glass transition temperature, although annealing partially restored rigidity. X-ray diffraction confirmed the higher crystalline order, and colorimetric evaluation showed perceptible changes in brightness and tone. Scanning electron microscopy revealed rougher fracture surfaces in annealed samples, which suggests a possible relationship with greater degree of crystallinity. Gel permeation chromatography indicated slight molecular weight degradation in neat PLA, whereas plasticized formulations remained stable., This research is a part of the grant PID2023-152869OBC22, and the grant TED2021-131762 A-I00, funded by MCIN/AEI/ https://doi.org/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. The authors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. C. Lazaro-Hdez thanks Generalitat Valenciana - GVA for funding a predoc position through the CIACIF program co-funded by ESF Investing in your future, grant number CIACIF/2023/244. M. Miranda-Pinzon thanks Vice-rectorate for Research of the Universitat Politècnica de València (UPV) for funding a predoctoral contract in the PAID-01-24 program. J. Ivorra-Martinez thanks Generalitat Valenciana - GVA for funding a postdoc position through the CIAPOS program co-funded by ESF Investing in your future, grant number CIAPOS/2023/362. Funding for open access charge: Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Compatibility Study of Polyamide (PA6) with Lubricant Bases for Electric Vehicle Applications

  • Tormos, B.|||0000-0002-8852-3783
  • Bermúdez, Vicente|||0000-0002-2781-5598
  • Balaguer-Reyes, Adbeel Elienai
  • Giménez Torres, Enrique|||0000-0002-6330-0209
[EN] This study explored the crucial relationship between base fluids and polyamide, a prevalent polymer in electric vehicle (EV) components, with the aim of enhancing the longevity and performance of EVs in the context of thermal management by immersion cooling. Focusing on polyalphaolefin and polyol ester as base fluids, an immersion test was conducted to assess their interaction with polyamide 6 using adapted ASTM standards. The results revealed the significant influences of both fluids on the physical properties and chemical structure of polyamide. Polyol ester demonstrated a lesser impact on the chemical and mechanical properties of polyamide 6., This research was partly supported by the project CIAICO/2021/013 AICO 2022 funded by GVA, Generalitat Valenciana. Adbeel Balaguer is supported through the program Subvenciones para la contratación de personal investigador predoctoral of the Generalitat Valenciana and the European Social Fund Plus [grant number CIACIF/2021/241].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Use of Sentinel-2 Images to Elaborate a VRT Sensor-Based and Map-Based Nitrogen Fertilization in Wheat and Barley Crops

  • Arizo-García, Patricia|||0000-0002-6725-9098
  • Castiñeira-Ibáñez, Sergio|||0000-0001-6414-3906
  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • San Bautista Primo, Alberto|||0000-0003-4846-6611
  • Franch-Gras, Belen
[EN] Precision agriculture can determine the amount of nitrogen (N) required in each area to optimize yield and nitrogen use efficiency (NUE). The use of variable rate technology (VRT) for planning N fertilization has often relied on techniques that are unfeasible for farmers with limited resources. This study aims to present a variable fertilization plan for wheat and barley, along with a protocol to determine the optimal timing for the second nitrogen (N) application, thereby minimizing the need for in situ crop monitoring. Two approaches are studied: a more straightforward sensor-based method and a map-based method. The sensor-based approach involved modeling the maximum NDVI based on the observed value at the time of application and the required N level, achieving an R2 of 0.55 ± 0.06 and 0.72 ± 0.04, an MAE of 0.025 ± 0.002 and 0.039 ± 0.002, and an RMSE of 0.049 ± 0.007 and 0.055 ± 0.004 for wheat and barley, respectively. The map-based approach relied on training models to estimate the nitrogen dose to be applied based on the target yield and reflectance data from Sentinel-2 at the time of application. Using random forest algorithms, an R2 of 0.97 ± 0.01 and 0.96 ± 0.02, an MAE of 3.33 ± 0.20 kg N ha¿1 and 2.01 ± 0.13 kg N ha¿1, and an RMSE of 4.79 ± 0.31 kg N ha¿1 and 3.27 ± 0.58 kg N ha¿1 for wheat and barley, respectively., This research was funded by the PREDIC-PRO project SCPP2100C008733XV0 of the State Research Agency of the Ministry of Science, Innovation and Universities, and the ACIF Generalitat Valenciana, European Union (European Social Fund. Investing in Your Future) grant number CIACIF/2022/255.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessing the Compatibility of PAO and POE with Fluoroelastomer (FKM) for Potential EVs Application

  • Tormos, B.|||0000-0002-8852-3783
  • Balaguer-Reyes, Adbeel Elienai
  • Giménez Torres, Enrique|||0000-0002-6330-0209
  • Liñeira-Del Río, José Manuel
[EN] The accelerated growth of electric vehicle (EV) powertrains has prompted the development of specialized fluids that meet stringent thermal and electrical requirements for immersion cooling systems, including interactions with non-metallic components like fluoroelastomer (FKM). This research investigates the interactions between fluoroelastomer (FKM) and two potential base fluids¿polyalphaolefin (PAO4) and a polyol ester (POE)¿to assess their suitability for immersion cooling applications. Immersion tests, following an adapted ASTM D7216 standard, evidenced changes in FKM¿s mass, Shore A hardness, and tensile strength. Furthermore, the physical, electrical, and thermal properties of the tested fluids were analyzed before and after immersion to determine whether contact with the FKM elastomer compromised their performance. The findings of this study reveal that the fluid exerts a greater influence on the elastomer than vice versa. This study bridges a knowledge gap in regards to EV fluid development and material science, contributing to the development of durable and efficient thermal management solutions., This research was partially supported by the project CIAICO/2021/013 AICO 2022, funded by GVA, Generalitat Valenciana. Adbeel Balaguer is supported through the program Subvenciones para la Contratación de Personal Investigador Predoctoral of the Generalitat Valenciana and the European Social Fund Plus [grant number CIACIF/2021/241].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microwave-Driven Densification of NASICON-type LATP: A Fast Route Toward Efficient Solid-State Electrolytes

  • Mormeneo-Segarra, Andrés|||0000-0002-8827-3649
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Ferrer-Nicomedes, Sergio
  • Vicente-Agut, Nuria
[EN] The transition from flammable liquid electrolytes to safer solid-state electrolytes is essential for next-generation batteries. Li1.3Al0.3Ti1.7(PO4)3 (LATP) is a promising NASICON-type electrolyte, but its application is hindered by energy-intensive high-temperature sintering. This work demonstrates microwave sintering as a rapid and efficient route to fabricate dense, highly conductive LATP. Green bodies with a relative density of 71% were obtained by combined uniaxial and isostatic pressing, followed by microwave sintering between 800 and 1100 ºC for only 10 minutes. Optimal densification (91.4%) was achieved at 1000 ºC, while higher temperatures led to abnormal grain growth and rutile-TiO2 formation. Electrochemical impedance spectroscopy revealed a strong reduction in grain-boundary resistance above 950 ºC. LATP sintered at 1000 ºC exhibited an ionic conductivity of 5·10-4 S cm-1 and an activation energy of 0.20 eV. Symmetric Li|LATP|Li cells showed stable cycling over 500 h with low overpotentials, confirming excellent transport and mechanical integrity., This publication is part of the grants PID2021-128548OB-C21 & C22 and CNS2023-144190 funded by MICIU/AEI/10.13039/501100011033, "ERDF/EU" and the "European Union NextGenerationEU/PRTR". A.M.-S. acknowledges the funding from the Aid for Early Research Projects (PAID-06-25) and the postdoctoral fellowship (PAID-10-24) programs from the Vice-Rectorate for Research of Universitat Politecnica de Valencia. S.F.-N thanks Generalitat Valenciana through FPI Fellowship Program (CIACIF/2021/050) . N. V.-A. acknowledges support for the research from Universitat Jaume I under the project number UJI/2023/016. Authors thank Felipe L. Penaranda-Foix from ITACA facilities for performing the dielectric measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Contribución al diseño de patrones de carga de un núcleo PWR asistido por Inteligencia Artificial

  • Pallarés-Font de Mora, Pablo|||0000-0002-0120-3251
  • Quintana-Ortí, Enrique S.|||0000-0002-5454-165X
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Barrachina, Teresa|||0000-0001-8794-4204
  • García-Sanjuán, Jose
  • Jorge López, Javier
[ES] El diseño del núcleo es el estudio a priori del comportamiento del núcleo de un reactor a lo largo de un ciclo entre dos recargas de combustible. Se trata de un cálculo termohidráulico y neutrónico en estado estacionario cuasi-estático, cuyo objetivo es obtener los valores de las variables de control (p. ej., concentración de boro, posición de barras de control, potencia, nivel de quemado, duración del ciclo) para operar el reactor en estado estacionario (keff=1) a lo largo de un ciclo de una planta. Para llevar a cabo este estudio, el ciclo se divide entre un cierto número de periodos de tiempo definidos por el aumento del quemado del combustible durante cada etapa. El grado de quemado de combustible es una medida de la cantidad de energía que ya se ha extraído de la fuente primaria de combustible nuclear y se expresa como la energía liberada por masa inicial de combustible en GWd/tHM (en GigaWatts-día/ tonelada métrica de metal pesado). Una parte importante de este tipo de estudios es la gestión de los archivos que contienen el histórico de simulación. De hecho, para determinar las secciones transversales en una determinada etapa del ciclo, es necesario conocer las condiciones de estado del reactor durante todas las etapas anteriores (historial)., Los autores desean agradecer al Consejo de Seguridad Nuclear (CSN) su apoyo financiero a través del proyecto de I+D+i CLPD-IA. Diseño Optimizado del Patrón de Carga del Núcleo de Reactores LWR Asistido por Inteligencia Artificial (SUB-36/2021), 2022-2024. Pablo Pallarés también contó con una beca predoctoral de la Generalitat Valenciana (CIACIF/2021/217).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo de revisión (ReviewArticle)

Sintering science meets sustainability: a review of cold sintering process in solid-state electrolytes

  • Mormeneo-Segarra, Andrés|||0000-0002-8827-3649
  • Ferrer-Nicomedes, Sergio
  • Vicente-Agut, Nuria
  • Barba Juan, Antonio
[EN] The global push for deep decarbonization by 2050 has accelerated energy storage development to address power intermittency. This review covers ceramic- and polymer-in-ceramic solid-state electrolytes obtained via the cold sintering process, which enables higher energy density and safety by replacing liquid electrolytes and supporting lithium-metal anodes. Cold sintering, at temperatures below 300 ¿C, provides fast densification with low environmental impact compared to traditional high-temperature sintering. It affects microstructure, phase stability, and ionic transport. Important applications include lithium and sodium solid electrolytes with notable density and conductivity. Challenges remain in material optimization, scaling, and integrating multifunctional designs for sustainable, high-performance batteries., A.B.-J. acknowledge the financial support from Generalitat Valenciana under Pla Complementari Programa de Materials Avanc¿ats , 2022 [grant number MFA/2022/030], and A.B.-J. also acknowledges Ministerio de Ciencia e Innovacion; (Spain) [grant number MCIN/AEI/10.13039/501100011033]. Am-S. and S.F.-N. thank Generalitat Valenciana through FPI Fellowship Program [grant numbers ACIF/2021/294 and CIACIF/2021/050]. N.V.-A. thanks the financial support from UJI [grant UJI-2023-16].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A literature review of existing state-of-the-art approaches for the dynamic scheduling and rescheduling problem

  • Fiesco-Muñoz, Juan Pablo|||0009-0008-3369-4607
  • Esteso, Ana|||0000-0003-0379-8786
  • Poler, R.|||0000-0003-4475-6371
[EN] This paper reviews existing state-of-the-art articles that address the dynamic scheduling (DS) and rescheduling (RS) problem. Unlike traditional static scheduling, which assumes fixed and predictable conditions, DS must continuously adapt to operational disruptions. In actual industrial environments and smart manufacturing (SM) factories, real-time adjustments are necessary to optimize production and resource usage. This review analyzes 10 state-of-the-art, selected for their explicit focus on DS/RS, detailed methodology, and relevance to SM and sustainability. The results highlight the existence of different terminologies for the DS problem and the absence of a standardized framework to classify all its characteristics. It was also found that the state of the art does not provide detailed and clear analyses of the integration of SM technologies into real-world manufacturing challenges. The approaches to sustainability aspects in the reviews analyzed focus on different aspects, such as energy efficiency, resource use and alignment with the SDGs, highlighting the need for a more holistic approach. The paper proposes future research directions, including updated reviews that integrate SM technologies, sustainability, and a standardized framework, encompassing real-time data, robust and agile tools, artificial intelligence and internet of things., This research has been partially funded by Horizon Europe Ref. 101057294 AI-Driven Industrial Equipment Product Life Cycle Boosting Agility, Sustainability, and Resilience (AIDEAS) ; and the Conselleria de Educación, Investigación, Cultura y Deporte - Generalitat Valenciana for hiring predoctoral research staff with Grant (CIACIF/2023/245).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High-Resolution Wheat and Barley Yield Forecasting Using Multi-Temporal Satellite Time Series and Machine Learning

  • Arizo-García, Patricia|||0000-0002-6725-9098
  • Castiñeira-Ibáñez, Sergio|||0000-0001-6414-3906
  • Cruzado-Campos, Enric
  • San Bautista Primo, Alberto|||0000-0003-4846-6611
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
[EN] High-resolution yield forecasting is essential for advancing precision agriculture and improving the sustainability of wheat and barley production. While most previous studies focus on field-scale predictions, pixel-level approaches are needed to capture intra-field variability and support site-specific management. This paper evaluates the performance of machine learning models for 10 m resolution yield prediction using multi-temporal Sentinel-2 surface reflectance data across seven major cereal-producing regions in Spain. Yield monitor data from winter wheat and barley fields collected over five growing seasons (2020¿2024) were combined with spectral bands and vegetation indices. Random Forest (RF) and XGBoost (XGB) models were trained at five phenological stages expressed as days before harvest (DBH) and validated using both internal (2020¿2023) and independent external (2024) datasets. Model accuracy increased as harvest approached. In external validation, RF achieved the best performance for wheat (R2 = 0.77; RMSE ¿ 697 kg · ha¿1), while XGB performed best for barley (R2 = 0.86; RMSE ¿ 744 kg · ha¿1). Visible, red-edge, and SWIR bands were the most informative predictors, especially during grain filling and senescence. Results demonstrate the potential of multi-temporal Sentinel-2 data and machine learning for accurate, transferable, pixel-level yield forecasting in Mediterranean cereal systems., This research was funded by the PREDIC-PRO project SCPP2100C008733XV0 of the State Research Agency of the Ministry of Science, Innovation and Universities, and the ACIF Generalitat Valenciana, European Union (European Social Fund. Investing in Your Future) grant number CIACIF/2022/255.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental Evaluation of All-Optical Up- and Down-Conversion of 3GPP 5G NR Signals Using an Optomechanical Crystal Cavity Frequency Comb

  • Fito-Estevan, Vicente
  • Ortiz-Fernández, Raúl|||0000-0002-4998-0201
  • Maria Morant|||0000-0001-5565-7788
  • Mercadé, Laura|||0000-0002-4994-7727
  • Roberto Llorente|||0000-0003-4799-2564
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Optomechanical crystal cavities (OMCCs) allow the interaction between localized optical and mechanical modes through the radiation-pressure force. Driving such cavities with blue-detuned lasers relative to the optical resonance can induce a phonon lasing regime where the OMCC supports self-sustained mechanical oscillations. This dynamic state results in a narrow and stable microwave tone that modulates the laser at integer multiples of the mechanical resonance frequency, creating an optomechanical (OM) frequency comb suitable for microwave photonics applications. OMCCs enable compact, low-cost power-efficient all-photonic processing of multiple microwave signals, crucial for current and future beyond-5G systems, whilst being compatible with silicon integrated photonic circuits. This work reports the demonstration of all-optical up- and down-conversion of 3GPP 5G new-radio (NR) signals from the low- to mid- and extended-mid bands using the first and second harmonics of the frequency comb generated in a silicon OMCC. The OM comb generates up to 6 harmonics in the K-band, which is suitable for microwave photonic applications. The experimental demonstration also evaluates the impact of the phase-noise and the signal-to-noise ratio (SNR) in the frequency-converted 5G NR signals when the first and second OMCC harmonics are employed for frequency conversion., The work of Vicente Fito and Raul Ortiz were supported under Grant PAID-01-20 UPV and Grant GVACIACIF/2021/006. This work was supported in part by Generalitat Valenciana CIAICO/2021/201 TERAFLEX Project under Grant IDIFEDER/2021/061, in part by Spanish Ministry of Science and Innovation ALLEGRO under Grant PID2021-124618NB-C21, in part by SLOMO under Grant PDC2022-133267-C21, in part by MUSICIAN (CHISTERA IV Cofund 2021), and in part by the European Commission through MAGNIFIC under Grant HORIZON-CL4-2022-RESILIENCE-01-10 101091968.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A framework for adapting conversational intelligent tutoring systems to enable collaborative learning

  • Arnau-González, Pablo|||0000-0001-9048-4659
  • Solera-Monforte, Sergi
  • Wu, Yuyan
  • Arevalillo-Herráez, Miguel
[EN] Despite the general consensus on the advantages of collaborative learning, most of the research in Intelligent Tutoring Systems (ITSs) only considers the case of individual learners. This is mainly due to the technical challenges in adapting individual learning systems to support collaborative learning. In this paper, we present a framework aimed at adapting individual-learner tutoring systems to enable collaboration among students, leveraging the advantages of both intelligent tutoring systems and peer collaboration, without significant changes to the original Human¿Computer Interaction model. The proposed framework is designed under the assumption that the adapted ITS is built as a web application, ensures horizontal scalability of the ITS, and relies exclusively on Open Source software and tools. Evaluation results of the framework demonstrate that while the system¿s complexity increases, there are no perceivable rises in response times or cpu usage., This research has been supported by Generalitat Valenciana, Spain through project CIGE/2023/063, grant CIAPOS/2022/163, grant ACIF/2021/439, CIACIF/2023/344, and project CIAICO/2023/065; project TED2021-129485B-C42, funded by MCIN/AEI/10.13039/ 501100011033 and the European Union NextGenerationEU /PRTR; and project PID2023-150960NB-I00, funded by the Spanish Ministry of Science, Innovation and Universities and the European Union.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

SARS-CoV-2 remodels the landscape of small non-coding RNAs with infection time and symptom severity

  • Corell-Sierra, Julia
  • Márquez-Molins, Joan
  • Marques, Maria-Carmen
  • Hernandez-Azurdia, Andrea Gabriela
  • Montagud-Martínez, Roser
  • Cebriá-Mendoza, María
  • Cuevas, José M.
  • Albert, Eliseo
  • Navarro, David
  • Rodrigo, Guillermo
  • Gomez, Gustavo
[EN] The COVID-19 pandemic caused by the coronavirus SARS-CoV-2 has significantly impacted global health, stressing the necessity of basic understanding of the host response to this viral infection. In this study, we investigated how SARS-CoV-2 remodels the landscape of small non-coding RNAs (sncRNA) from a large collection of nasopharyngeal swab samples taken at various time points from patients with distinct symptom severity. High-throughput RNA sequencing analysis revealed a global alteration of the sncRNA landscape, with abundance peaks related to species of 21-23 and 32-33 nucleotides. Host-derived sncRNAs, including microRNAs (miRNAs), transfer RNA-derived small RNAs (tsRNAs), and small nucleolar RNA-derived small RNAs (sdRNAs) exhibited significant differential expression in infected patients compared to controls. Importantly, miRNA expression was predominantly down-regulated in response to SARS-CoV-2 infection, especially in patients with severe symptoms. Furthermore, we identified specific tsRNAs derived from Glu- and Gly-tRNAs as major altered elements upon infection, with 5¿ tRNA halves being the most abundant species and suggesting their potential as biomarkers for viral presence and disease severity prediction. Additionally, down-regulation of C/D-box sdRNAs and altered expression of tinyRNAs (tyRNAs) were observed in infected patients. These findings provide valuable insights into the host sncRNA response to SARS-CoV-2 infection and may contribute to the development of further diagnostic and therapeutic strategies in the clinic., This work was supported by the Agencia Estatal de Investigación (AEI) (co-supported by FEDER - EU) (Grant PID2022-1393930B-I00 to GG), the CSIC PTI Salud Global (grant SGL2021-03-040 to G.R.) through the NextGenerationEU Fund (regulation 2020/2094) and the Regional Government of Valencia (grant GVA-COVID19/2021/036 to G.R.). J.C.S. and A.G.H.A. are recipients of a pre-doctoral contract from the Generalitat Valenciana (CIACIF-2021-279 and ACIF-2021-202). The central tRNA structure shown in Fig. 4 is adapted from the original figure The tRNA cloverleaf general by Yikrazuul under a Creative Commons license (C.C. BY 3.0).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Chemical Probe for Increasing Leaf Tocopherol Levels by Coordinated Modulation of Biosynthesis, Competition and Storage

  • Pérez-Colao, Pablo
  • Lozano-Juste, Jorge|||0000-0001-7034-566X
  • RODRIGUEZ-CONCEPCION, Manuel|||0000-0002-1280-2305
  • Glauser, Gaetan
  • Cruces, Jacobo
[EN] Plant biofortification with phytonutrients typically relies on metabolic engineering strategies known as “push” (enhancing biosynthetic flux), “block” (inhibiting competing pathways), and “pull” (promoting metabolite storage). Here, we describe a novel synthetic compound, X57, that simultaneously targets biosynthesis, competition, and storage to enhance leaf tocopherol content. Tocopherols protect plants against oxidative stress, have dietary value as vitamin E, and are widely used as antioxidants in food and cosmetic formulations. X57 exerts a primary “push” effect by inducing tocopherol biosynthesis, partly through reactivating a direct pathway that reduces geranylgeranyl diphosphate (GGPP) to phytyl diphosphate, thereby bypassing the need for chlorophyll-derived phytol. Accordingly, X57 promotes tocopherol accumulation in etiolated seedlings and restores tocopherol synthesis in mutants deficient in phytol phosphorylation. The “block” effect is mediated by downregulation of GGPP consumption for carotenoid synthesis. X57 also induces a “pull” effect via proliferation of plastoglobules (PGs), plastidial lipoprotein bodies that synthesize and store tocopherols. X57-induced PG proliferation is driven by increased tocopherol levels and upregulation of genes encoding PG structural proteins such as fibrillins. The genetic networks coordinating plastidial isoprenoid metabolism and plastid differentiation may be specific to higher plants, as X57 does not promote—and instead reduces—tocopherol accumulation in Marchantia polymorpha., We thank Felix Kessler (University of Neuchatel) for the 35S:FBN7a-YFP line, Peter Dormann and Katharina Gutbrod (University of Bonn) for providing seeds of the vte5 mutants, and Miguel Angel Blazquez and Macarena Mellado-Sanchez (IBMCP) for providing Marchantia polymorpha thalli. We are also grateful to Jose M. Perez-Beser and Esther Pau-Ramos (IBMCP) for general technical support, Maria T. Minguez (University of Valencia SCSIE Microscopy Section) for her expert support with TEM, Javier Forment (IBMCP Bioinformatics platform) for his assistance with RNA-seq and BLAST analyses, and the IBMCP Metabolomics platform staff for help with HPLC.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Unveiling Interpretability in Self-Supervised Speech Representations for Parkinson&apos, s Diagnosis

  • Gimeno-Gómez, David|||0000-0002-7375-9515
  • Martínez-Hinarejos, Carlos-D.|||0000-0002-6139-2891
  • Botelho, Catarina
  • Pompili, Anna
  • Abad, Alberto
[EN] Recent works in pathological speech analysis have increasingly relied on powerful self-supervised speech representations, leading to promising results. However, the complex, black-box nature of these embeddings and the limited research on their interpretability significantly restrict their adoption for clinical diagnosis. To address this gap, we propose a novel, interpretable framework specifically designed to support Parkinson's Disease (PD) diagnosis. Through the design of simple yet effective cross-attention mechanisms for both embedding- and temporal-level analysis, the proposed framework offers interpretability from two distinct but complementary perspectives. Experimental findings across five well-established speech benchmarks for PD detection demonstrate the framework's capability to identify meaningful speech patterns within self-supervised representations for a wide range of assessment tasks. Fine-grained temporal analyses further underscore its potential to enhance the interpretability of deep-learning pathological speech models, paving the way for the development of more transparent, trustworthy, and clinically applicable computer-assisted diagnosis systems in this domain. Moreover, in terms of classification accuracy, our method achieves results competitive with state-of-the-art approaches, while also demonstrating robustness in cross-lingual scenarios when applied to spontaneous speech production., The work of David Gimeno-Gómez and Carlos-D. Martínez-Hinarejos was supported in part by GVA under Grant CIACIF/2021/295 and Grant CIBEFP/2023/167, and in part by MCIN/AEI and ERDF, EU A way of making Europe through Project LLEER under Grant PID2021-124719OB-I00. The work of Catarina Botelho, Anna Pompili, and Albetro Abad was supported in part by Portuguese National funds through Fundação para a Ciência e a Tecnologia, with reference DOI: 10.54499/UIDB/50021/2020, and in part by Portuguese Recovery and Resilience Plan and NextGenerationEU European Union Funds under Project C644865762-00000008 (Accelerat.AI). This work was supported by CRUE-Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An open benchmark dataset for machine learning and intelligent trajectory optimization in fixed-wing unmanned aerial systems

  • García-Gascón, César|||0009-0007-6772-0474
  • Javier Bas-Bolufer
  • Castelló-Pedrero, Pablo|||0000-0002-6927-6430
  • García Manrique, Juan Antonio|||0000-0001-9507-0746
[EN] This paper presents an open-access telemetry dataset designed to support research and training in intelligent fixed-wing unmanned aerial systems. The dataset contains 240 fully annotated autonomous missions flown outdoors over repeatable, waypoint-based trajectories using two onboard architectures: a compact SpeedyBee F405 flight controller running INAV, and a Holybro Pixhawk 6X paired with a Jetson Orin NX companion computer running PX4. The missions cover key phases, including take-off, cruise, dynamic manoeuvres, and autonomous landing. Each log provides synchronised multi-sensor telemetry (IMU, GNSS, barometric altitude, actuator states, flight modes, and power metrics) at high temporal resolution, enabling realistic modelling of flight dynamics, estimator behaviour, and sensor noise. The dataset supports benchmarking for trajectory tracking under degraded GNSS, anomaly detection, wind-aware navigation, and energy-optimised mission planning. The paper documents hardware integration, communication architecture, mission procedures, and the dataset file structure, and includes representative analyses to illustrate reuse for contested, safety-critical, and complex operational environments in field. No neural network is trained or evaluated; deep learning is cited only as a motivating application domain., This research received partial funding from the Government of Spain under the project PID2023-151110OB-I00, and from the Generalitat Valenciana through projects CIPROM/2022/3, CIACIF/2021/286, and CIBEFP/2024. César García-Gascón is supported by a predoctoral contract funded under CIACIF/2021/286 and has also received a mobility grant for a research stay under reference CIBEFP/2024. Javier Bas-Bolufer is funded through the project CIPROM/2022/3. All co-authors are contributors within the framework of the national project PID2023-151110OB-I00 . Funding for open access charge: CRUE-Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Artificial Intelligence and Optimization Models for Agile and Resilient Production Planning and Control

  • Fiesco-Muñoz, Juan Pablo|||0009-0008-3369-4607
  • Esteso, Ana|||0000-0003-0379-8786
  • Poler, R.|||0000-0003-4475-6371
[EN] The increasing uncertainty in the manufacturing industry, driven by disruptive events and market fluctuations, highlights the need for more agile and resilient Production Planning and Control (PPC) strategies. This research focuses on addressing the Capacitated Lot Sizing and Scheduling (CLSS) for medium-term planning and Dynamic Scheduling (DS) for short-term decision-making by integrating Mathematical Programming, Artificial Intelligence (AI), and Smart Manufacturing (SM) technologies. A systematic review of CLSS and DS models identifies gaps in modeling uncertainty and adapting to real-time disruptions. A conceptual framework is proposed to standardize CLSS characteristics, while a matheuristic approach combines metaheuristics and mathematical programming to optimize sustainability-driven lot sizing decisions. Additionally, an AI-based tool dynamically reschedules production in response to real-time factory data. The research further develops a scalable architecture for industrial implementation, leveraging IoT and AI for enhanced decision-making. Validation is conducted through real and synthetic case studies, assessing solution quality and computational efficiency. This work aims to bridge the gap between traditional optimization techniques and smart, data-driven SM environments., This research has been partially funded by Horizon Europe Ref. 101057294 AI-Driven Industrial Equipment Product Life Cycle Boosting Agility, Sustainability, and Resilience (AIDEAS) ; and the Conselleria de Educación, Investigación, Cultura y Deporte - Generalitat Valenciana for hiring predoctoral research staff with Grant (CIACIF/2023/245).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Some remarks on Phelps property U of a Banach space into C(K) spaces

  • Cobollo-Gómez, Christian|||0000-0002-5901-5798
  • Guirao Sánchez, Antonio José|||0000-0002-1031-3954
  • Montesinos Santalucia, Vicente
[EN] A subspace X of a Banach space Y has Property U whenever every continuous linear functional on X has a unique norm-preserving (i.e., Hahn-Banach) extension to Y (Phelps in Trans Am Math Soc 95:238-255, 1960). Throughout this document, we introduce and develop a systematic study of the existence of U-embeddings between Banach spaces X and Y, that is, isometric embeddings of X into Y whose ranges have property U. In particular, we focus on the case Y = C(K), where K is a compact Hausdorff topological space. We provide results for X a reflexive or another C(K) space., The authors were partially supported by the Universitat Politecnica de Valencia (Spain) and by Grant PID2021-122126NB-C33 funded by national MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe". Ch. Cobollo was also supported by Generalitat Valenciana (Project PROMETEU/2021/070 and CIACIF/2021/378) and by MCIN/AEI/ 10.13039/ 501100011033 (Project PID2019-105011GB). A. J. Guirao was also supported by Fundacion Seneca, Region de Murcia (Grant 19368/PI/14). V. Montesinos was also supported by AEI/FEDER (Project MTM2017-83262-C2-1-P of Ministerio de Economia y Competitividad). We thank two anonymous referees for their valuable suggestions to improve the content and structure of the present paper. In particular, Remark 4.10 and Proposition 6.31 were suggested by one of them.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Vertex: A Semantic Graph-Based Indoor Navigation System with Vision-Language Landmark Verification

  • Ferri-Molla, Isabel|||0009-0008-3608-9891
  • Silvestre Cerdà, Joan Albert|||0000-0003-2291-8296
  • Bazazian, Dena
  • Varga, Marius N.
  • Linares-Pellicer, Jordi
[EN] Older adults often need guidance when visiting new buildings for the first time. However, indoor navigation remains challenging due to the lack of Global Positioning System (GPS) availability, visually repetitive corridors, and frequent location failures. This article presents a multimodal indoor navigation assistant that combines graph-based route planning with visual landmark verification to provide step-by-step guidance. The environment is modelled as a directed graph whose nodes are annotated with semantic landmarks, and the graph is constructed primarily from a video of the building, reducing the need for 3D scanners, beacons, or other specialised instruments. Routes are calculated using Dijkstra¿s shortest-path algorithm over the semantic graph. During navigation, camera frames are analysed using a restricted vision-language recognition strategy that only considers candidate landmarks from the current and next nodes, reducing false detections and improving interpretability. To increase robustness, a temporary voting mechanism was introduced to confirm node transitions, as well as a hierarchical redirection strategy with local and global recovery. The system is implemented in two modes: handheld mode with visual cues using augmented reality arrows, mini map and voice instructions, and hands-free mode with front camera using voice instructions and keywords. Evaluation involved preliminary technical testing in the United Kingdom followed by formal user validation in Spain. During these trials, participants reported high usability, strong confidence and safety, and increased perceived independence., This research was funded by Generalitat Valenciana, FPI grant CIACIF/2022/098.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bi-Functional Topospecific Nanoparticles to Promote Immune-Tumor Cell Engagement as A New Immunotherapeutic Strategy

  • Ortuño-Bernal, Alba Amparo
  • Clara-Trujillo, Sandra|||0000-0002-6455-2993
  • Hicke-García, Francisco Javier|||0000-0002-8419-0467
  • Escudero-Noguera, Andrea|||0000-0003-2670-6127
  • García-Fernández, Alba|||0000-0002-8416-1674
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Lucena-Sánchez, Elena
  • Pradana-López, Sandra
  • Jiménez-Alduán, Nelia
  • Diez-Sánchez, Paula
[EN] Cancer immunotherapy has emerged as a promising alternative approach, enabling the body's immune system to fight cancer. Cytotoxic T cells play a pivotal role in recognizing and eliminating tumor cells, and their effectiveness relies on establishing a physical interaction and efficient communication with cancer cells. However, this communication is often disrupted by immune escape mechanisms, allowing cancer progression. A versatile nanoplatform is developed to restore cellular connection using Janus mesoporous silica-Au nanoparticle (J-pHLIP-PD1), including specific binding sites on opposite faces for simultaneous binding to cancer cells and immune cells. The two differential surfaces on the nanoparticle allow orthogonal functionalization with the anti-PD-1 antibody that interacts with the PD-1 receptor in cytotoxic T cells on the gold face and the pH Low Insertion Peptide (pHLIP), which undergoes specific insertion into the tumor cell membrane on the silica face. J-pHLIP-PD1 nanoparticles effectively bind the surface of tumor cells and capture T cells, facilitating the formation of immune synapse-like structures that lead to reduced cancer cell viability in vitro, associated with immunogenic cell death signatures. The therapeutic potential of J-pHLIP-PD1 is also demonstrated in an in vivo metastatic melanoma model, where treatment with J-pHLIP-PD1 produces a significant decrease in metastatic burden and increases T cell presence. The Janus nanosystem represents an attractive platform that expands the toolbox of immune-engaging strategies, offering a flexible alternative to conventional immunotherapies that link immune and tumor cells, restoring cell-cell communication for cancer elimination., A. Ortuno-Bernal, S. Clara-Trujillo and E. Lucena-Sanchez have con-tributed equally to this work. This work was supported by the European Research Council (ERC) via Advanced Grant (101052997, EDI-SON). The authors thank the Spanish Government, project PID2021-126304OB-C41 by MCIN/ AEI /10.13039/501100011033/ and by European Regional Development Fund-A way of doing Europe. This studywas also supported by the Generalitat Valenciana (project PROMETEOCIPROM/2021/007). This study forms part of the Advanced Materials pro-gram (MFA/2022/049) and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana. This work was also supported by CIBER -Consorcio Centro deInvestigacion Biomedica en Red- (CB06/01/2012), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovacion. A.G-F. thanks the financial support from FC AECC (IDEAS246782GARC). E.L.-S is grateful for herFPU fellowship funded by MINECO (FPU18/06539). F.J.H thanks MIUfor his FPU grant (FPU20/06021). A.O.B acknowledges support from apredoctoral fellowship funded by the Generalitat Valenciana (GVA, Grant No.CIACIF/2023/320). Samples included in this study were provided bythe Biobanco La Fe (B.0000723) and they were processed following stan-dard operating procedures with the appropriate approval of the Ethics andScientific Committees. Graphical images and schemes were created withBioRender.com.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthetic GTL e-diesel as high-reactivity fuel for RCCI/MMDF heavy-duty combustion

  • Iñiguez-Barrios, Erasmo Antonio|||0009-0001-9930-7488
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • García Martínez, Antonio|||0000-0001-5783-4936
  • Martínez-Boggio, Santiago
[EN] The decarbonization of medium-and heavy-duty transport requires advanced combustion strategies capable of simultaneously reducing greenhouse gas emissions and pollutant formation while maintaining high efficiency under both steady-state and transient operation. In this context, Multi-Mode Dual-Fuel combustion has demonstrated strong potential for ultra-low NOx and soot emissions; however, the use of conventional diesel as the high-reactivity fuel limits its overall carbon reduction potential. This work experimentally evaluates the use of synthetic GTL e-diesel as high-reactivity fuel in a 7.7 L heavy-duty dual-fuel engine operating with gasoline as low-reactivity fuel under Multi-Mode Dual-Fuel combustion. The study includes a direct fuel substitution assessment, a dedicated full-map recalibration, and validation under the World Harmonized Stationary Cycle. The baseline comparison showed that GTL e-diesel advanced combustion phasing at low and medium loads, increasing brake thermal efficiency by approximately 1-2% in selected operating regions. GTL also reduced soot, CO, and HC emissions across most of the engine map, although NOx penalties appeared at low loads due to earlier combustion. A dedicated calibration based on air-path and injection optimization successfully restored EURO VI compliance over a broader operating region while preserving efficiency benefits. During World Harmonized Stationary Cycle operation, the optimized GTL configuration maintained stable combustion and reduced cycle-integrated NOx, soot, fuel consumption, CO, and HC emissions relative to diesel Multi-Mode Dual-Fuel combustion. Furthermore, Well-to-Wheel analysis showed approximately 20% lower COQ emissions compared to diesel operation, demonstrating the carbon reduction potential of GTL e-diesel in dual-fuel heavyduty engines., The author Erasmo Iñiguez acknowledges the financial support from the Conselleria d'Innovacio , Universitats, Ciencia i Societat Digital de la Generalitat Valenciana under the grant "Subvenciones para la contratacion de personal investigador predoctoral (ACIF) " (CIACIF/2022/100).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Curcumin-Loaded HA-Based Nerve Guidance Conduit with PLA Microfibers-Filled Lumen Enhances Schwann Cell Proliferation and Alignment

  • Fuster-Gómez, Sandra|||0000-0001-5788-3981
  • Martínez-Férriz, Arantxa|||0000-0001-7193-2575
  • Navarro-Páez, Francisco|||0000-0002-4383-3681
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
[EN] Peripheral nerve injuries (PNIs) represent a significant health challenge for society, as they can result in lifelong disabilities. Despite the rapid advancement of tissue engineering technology, the regeneration of peripheral nerves through nerve guidance conduits (NGCs) remains less favorable than the gold standard treatment, nerve autografts. Consequently, improving the effectiveness of NGCs is essential. The objective of this study was to develop a more effective nerve guidance conduit. To achieve this, hyaluronic acid tubular scaffolds were loaded with curcumin, which has been shown to promote peripheral nerve regeneration, and filled with polylactic acid microfibers to encourage directed growth. A physicochemical characterization of this novel NGC was performed to ensure a thorough understanding of its structural features and performance characteristics. The impact of curcumin and PLA microfibers on Schwann cells, a crucial player in nerve regeneration, was evaluated. The sustained release of curcumin from the hyaluronic hydrogel was observed to enhance the proliferation of Schwann cells, which aligned themselves in a parallel fashion with the PLA microfibers. The proliferation and alignment of these cells within the NGC provides an optimal environment for the regeneration of nerves., The authors acknowledge financing from grant PID2021-12661OB-I00 funded by MCIN/AEI/10.12039/501100011033 and by ERDF (BioNerv). FNP acknowledges the CIACIF/2021/249 scholarship from the Generalitat Valenciana (Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital) and the European Social Fund (ESF). Funding for open access charge: CRUE-Universitat Politecnica de Valencia. The authors also acknowledge the Electron Microscopy Service at the UPV, where the HR-FESEM images were obtained.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Repair index of energy-related products: Application to capsule coffee machines

  • Blanco-Espeleta, Eduardo|||0000-0001-9610-4661
  • Perez-Belis, Victoria|||0000-0002-7545-917X
  • Bovea, María D.
[EN] In recent years, the European regulatory framework related to sustainable products has evolved to promote the circular economy, with a special emphasis on repair strategies to reduce raw material consumption and e-waste generation. In this context, the present study aims to assess the repairability level of small electrical and electronic appliances, specifically focusing on capsule coffee machines, taking the EN 45554 standard (General methods for the assessment of the ability to repair, reuse, and upgrade energy-related products) as a reference. To achieve this objective, an interpretation of the standard is made with the aim of developing a repair matrix to facilitate the calculation of the repair index. The repair matrix is customised to the case study of capsule coffee machines. Following its application with four existing capsule coffee machines and having obtained their corresponding repair indexes, design requirements to improve the repairability of this product category are identified and applied in the design of a new capsule coffee machine with a higher (better) repair index. After this process, various improvement options for the repair matrix that enhance the accuracy of the EN 45554 requirements are discussed and applied, and finally compared with the Repairability assessment methodology (AsMeR)., The authors are grateful to Generalitat Valenciana (Spain) (CIACIF/2021/141) for their financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Redox-Stable Electrodes for Ethane Dehydrogenation Based on Proton Ceramic Electrochemical Reactors

  • Barrio-Querol, Elena
  • Catalán-Martínez, David
  • Leonard, Kwati
  • Almar-Liante, Laura|||0000-0001-5103-3812
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
[EN] Ethylene is one of the most widely used components in the chemical industry, but the main manufacturing route involves significant energy consumption and generates substantial CO2 emissions. Proton ceramic electrochemical reactors (PCERs) offer great potential for process intensification and could play a key role in ethane dehydrogenation (EDH) by extracting H-2 produced during the reaction. This process not only improves the reaction yield but also enables the production of a pure separated H-2 stream. However, nonoxidative EDH reaction conditions lead to coke formation, which is further increased by H-2 extraction, resulting in a decrease in system performance. Therefore, to successfully integrate PCER technology into ethylene production, it is crucial to develop stable redox electrodes that can withstand both nonoxidative H-2 extraction and coke oxidation conditions. In this work, we study different composite electrodes based on the perovskite La0.8Sr0.2Cr0.5Mn0.5O3-delta (LSCM) combined with the proton conductor BaCe0.55Zr0.3Y0.15O3-delta (BCZY(5515)). The electrochemical performance was characterized by using electrochemical impedance spectroscopy under both oxidizing and reducing conditions. The data analysis indicates that surface processes limit electrode operation. The infiltration of Pt and CeO2 nanoparticles in the electrode enhanced the electrochemical performance, improving it by a factor of 10 at 700 degrees C. The optimal electrochemical performance was observed for the LSCMF/BCZY(5515) (La0.8Sr0.2Cr0.5Mn0.25Fe0.25O3-delta/BaCe0.55Zr0.3Y0.15O3-delta) electrode infiltrated with Pt/CeO2, demonstrating promising properties as a redox-stable electrode. Finally, we evaluated the nonoxidative EDH reaction using a PCER based on a Ni-SrZr0.5Ce0.4Y0.1O2.95 (SZCY541) supported cell with a LSCMF/BCZY(5515) anode infiltrated with Pt/CeO2 and a thin BaZr0.44Ce0.36Y0.2O3-delta electrolyte., This work is part of the WINNER project that has received funding from the Fuel Cell and Hydrogen 2 Joint Undertaking under grant agreement no 101007165. This Joint Undertaking received support from the European Union's Horizon 2020 Research and Innovation programme, Hydrogen Europe and Hydrogen Europe Research. Financial support by the Spanish Ministry of Science and Innovation (PID2022-139663OB-100 and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033) and by the Generalitat Valenciana (CIACIF/2021/199 and CIPROM/2022/10 grants) is gratefully acknowledged. Also, the authors acknowledge the support of the Servicio de Microscopia Electronica of the Universitat Politecnica de Valencia (UPV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Differential intestinal microbiome response to heat stress in two rabbit maternal lines: A comparative analysis using Random Forest, BayesC, and PLS-DA

  • Biada, Iliyass|||0000-0002-4111-4552
  • Ibáñez-Escriche, Noelia|||0000-0002-6221-3576
  • Santacreu, María-Antonia|||0000-0002-6847-9551
  • Tiezzi, Francesco
  • García, María Luz
  • Argente, María José
[EN] Heat stress affects livestock productivity and health, particularly in rabbits, due to their physiological vulnerabilities. This study explores the relationship between environmental conditions, genetic lines backgrounds, and soft fecal microbiota. A 2 x 2 factorial design was used, involving 2 maternal rabbit lines: A (standard longevity line) and LP (high longevity line), exposed to heat stress and thermal comfort. Samples were analyzed with multiple models to assess the impact of heat stress on microbiota by comparing microbial diversity and evaluating the classification performance of Random Forest, Partial Least Squares Discriminant Analysis (PLS-DA), and Bayesian Regression (BayesC). Heat stress influenced microbial diversity in both lines, increasing alpha diversity and driving significant beta-diversity shifts (2.3% variance, P < 0.001). This could be due to intestinal barrier disruption, which facilitate pathogen proliferation. The high longevity line LP exhibited higher richness under thermal comfort, whereas heat stress equalized these differences between lines, possibly due to increased pathogen proliferation in the low longevity line A. These differences in response to heat stress may be influenced by the crosstalk between microbiota and host genetics, shaping distinct adaptive mechanisms in each line. Prediction accuracy and key selected variables distinguishing between lines A and LP varied across thermal conditions, with the area under the curve exceeding 0.92 under heat stress and 0.87 in thermal comfort. This reflects different microbiome regulations between the 2 lines under heat stress. Potential stress-associated taxa such as Erysipelatoclostridium and Monoglobus were more abundant in the low longevity line A. These results highlight LP's higher longevity and expected resilience, while line A's susceptibility is reflected in a higher abundance of heat stress-associated taxa in the latter. This underscores soft fecal microbiota as a potential biomarker for heat stress resilience and emphasizes the role of host-microbiota interactions in mediating genetic-environmental responses. Additionally, this study highlights the value of combining modeling approaches, which enhance accuracy and reveal key taxa driving heat stress responses. Among the models tested, PLS-DA achieved the highest accuracy, while Random Forest identified a smaller yet biologically relevant subset of taxa, providing valuable phylogenetic and taxonomic insights., Iliyass BIADA acknowledges a CIACIF/2021/005 scholarship from Generalitat Valenciana. The authors also acknowledge AGROALNEXT program and Tamara Romero Rueda and Rafael Torres Lozano for their collaboration in the collection of samples and handling of the animals. Funding for open access charge: CRUE-Universitat Politecnica de Valencia. This research is part of the AGROALNEXT program (AGROALNEXT/2022/037) and has been financed by MCIN with funds from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana. Additionally, this work was supported by COST Action CA22112, which provided funding for a Short-Term Scientific Mission (STSM) awarded to Iliyass Biada.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dual-mode phonon dynamics and lasing in optomechanical cavities

  • Ortiz-Fernández, Raúl|||0000-0002-4998-0201
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Mas-Arabi, Carlos|||0000-0001-5564-5365
  • Milián Enrique, Carles|||0000-0001-8492-366X
[EN] We use the full nonlinear bifurcation theory as a powerful methodology to thoroughly classify and predict the phonon lasing dynamics in optomechanical cavities. We exemplify its scope in the very relevant and so far vaguely explored dynamics of dual-mode phonon lasing when two independent mechanical modes are directly coupled to one optical field. We uncover a plethora of different lasing regimes in a fixed and realistic cavity geometry, including single- and dual-mode lasing, and an example of chaos. All dynamical regimes are unambiguously associated with bifurcations of different natures, which may exhibit both super- and subcritical natures characterizing the often hysteretic behavior of the systems when they are externally driven by a time-varying laser source. Our results, generalizable to any other optomechanical system, open unprecedented pathways to understand and control the formation and dynamics of optomechanical frequency combs., The authors acknowledge funding from Generalitat Valenciana (GVA, CIACIF/2021/006), HORIZON EUROPE Framework Programme (MAGNIFIC 101091968), Generalitat Valenciana (CIGE/2023/126), and Agencia Estatal de Investigación (ALLEGRO PID2021-124618NB-C21 and MUSICIAN PCI2022-135003-2, CHISTERA IV Cofund 2021). C.M.A. acknowledges funding from the Ministerio de Universidades through the Beatriz Galindo program (BG22/00025).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Right to repair in practice: Environmental and economic performance of coffee machine repairs

  • Blanco-Espeleta, Eduardo|||0000-0001-9610-4661
  • Perez-Belis, Victoria|||0000-0002-7545-917X
  • Bovea, María D.
[EN] The European Commission's recent adoption of the `Right to Repair¿ promotes product repairability to reduce waste and conserve raw materials. This European framework also requires that consumers be provided with clear and accessible information on their options to repair or replace broken appliances, emphasising the environmental and economic advantages of repair. Focusing on the product category of `capsule coffee machines¿, this research aims to provide consumers with comprehensive information to support decision-making regarding repair costs and environmental performance. The study's novel approach integrates Life Cycle Assessment (LCA) and Life Cycle Costing (LCC) methodologies, enabling a holistic evaluation of the environmental and economic impacts of repair versus replacement decisions. Additionally, it introduces repairability indices for specific components and presents the findings in a consumer-friendly format, aligned with the European `Right to Repair¿ initiative. To this end, four capsule coffee machines were selected as a case study. A diagnosis of the current repair landscape was conducted using data from the Open Repair Alliance, which provided information on priority parts, failure rates, failure ages, and repair success rates. Repairability indices for each machine and its priority components were then calculated in accordance with the EN 45554 standard. Finally, replacement and repair scenarios were analysed to assess their environmental and economic performance. The results indicated that prioritising the repair of components with high failure rates and ease of repair offers significant environmental and economic benefits. This transparent information can be provided to consumers, enabling them to decide between repairing or replacing their equipment. In theoretical terms, this framework enhances understanding of integrated sustainability assessments by combining environmental and economic analyses. In practical terms, it provides actionable insights for manufacturers and policymakers to design products for repairability. For society, it empowers consumers to make informed decisions that foster sustainable consumption and production., The authors would like to express their gratitude to the Generalitat Valenciana (Spain) for its financial support (CIACIF/2021/141).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thermo-Compressed Films of Poly(butylene succinate) Reinforced with Cellulose Fibers Obtained from Rice Straw by Green Extraction Methods

  • Olivas-Alonso, Carmen
  • Vieira-De Freitas, Pedro Augusto
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] In this study, two green extraction methods are explored to valorize rice straw into cellulose fibers (CFs), namely subcritical water extraction (SWE) and combined ultrasound-heating treatment (USHT). The resultant fibers are, thereafter, successfully pretreated with (3-glycidyloxypropyl) trimethoxysilane (GPS) and incorporated at 3% wt into poly(butylene succinate) (PBS) by melt-mixing. The green composites are shaped into films by thermo-compression and characterized in terms of their performance for food packaging applications. The chemical analysis of the fibers reveals that SWE is more effective to selectively remove hemicelluloses than USHT, whereas silanization promotes the removal of lignin in both fiber types. Fiber incorporation, more notably in the case of the silanized fibers, restricts the movement of the PBS chains, indicating good interaction with the biopolyester matrix. In particular, CFs act as antinucleating agents in PBS, delaying both glass transition and crystallization from the melt phenomena and hindering crystal formation. Furthermore, the fibers mechanically reinforce and improve the oxygen barrier of the PBS films. The highest barrier enhancement is obtained for the thermo-compressed composite film with silanized fibers obtained by SWE, yielding a decrease of nearly 20% in the permeability to oxygen versus the unfilled PBS film.; Valorization of rice straw by green extraction methods, namely subcritical water extraction and combined ultrasound-heating treatment, leads to cellulose fibers. These fibers can be silanized and thereafter incorporated into poly(butylene succinate) by melt-mixing. The resultant green composites can be shaped by thermo-compression into films with improved rigidity and enhanced oxygen barrier, being of interest in food packaging applications. image, This research was funded by the Spanish Ministry of Science and Innovation (MICI), Grant No. PID2021-128749OB-C33, and Generalitat Valenciana (GVA), Grant Nos. AGROALNEXT/2022/026 and CIPROM/2021/071. Sergio Torres-Giner also acknowledged the financial support received during his Ramon y Cajal contract (RYC2019-027784-I) and Carmen Olivas-Alonso during her PhD scholarship (No. CIACIF/2021/422).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Does Laboratory Theory Assessment Correspondence Differ Across First-Year Engineering Degree Cohorts?

  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
  • González-Pavón, César|||0000-0002-0002-4358
  • Arizo-García, Patricia|||0000-0002-6725-9098
  • Onrubia-Fontangordo, Lucas|||0000-0002-3809-8969
  • Jose Maria Bravo|||0000-0002-8337-7385
  • Castiñeira-Ibáñez, Sergio|||0000-0001-6414-3906
  • Gasque Albalate, Maria|||0000-0002-7271-9001
[EN] Laboratory practices in engineering education, and particularly first-year Physics laborato-ries, are traditionally considered a cornerstone for acquiring technical competencies. How-ever, this study examines whether the correspondence between laboratory and theoretical-exam performance is uniform across student cohorts. We present a quantitative analysis of 477 student performance observations from the Universitat Politècnica de València across three degree programs with different aggregate admission profiles: Telecommunica-tions Engineering (GITST), Agricultural Engineering (GIAMR), and Forestry Engineering (GIFMN). The methodology focuses on thematic course units designed under the estab-lished framework of constructive alignment, with GIAMR and GIFMN providing the closest within-study comparison because the same course is taught in both programs by the same teaching staff, with shared laboratory activities and procedures and jointly ad-ministered assessments. For GITST, only the laboratory and written partial-exam outcomes corresponding to the Magnetism and Induction thematic unit were analyzed, whereas GIAMR and GIFMN contributed separate assessment pairs for the two thematic units. GIAMR Partial 1 showed a positive association that reached the significance threshold under both Pearson¿s chi-squared and Fisher¿s exact tests (OR = 2.53; Pearson p = 0.039; Fisher p = 0.046). GIAMR Partial 2, the GITST pairing, and GIFMN Partial 1 showed positive but non-significant associations, whereas GIFMN Partial 2 showed a pronounced inverse descriptive pattern that did not reach the significance threshold under Fisher¿s exact test (p = 0.062). In this study, ¿curricular decoupling¿ denotes a weakening or loss of correspondence between laboratory and theoretical-exam outcomes; the observational design does not establish that aggregate entry profiles caused the observed differences., P. Arizo-García acknowledges financial support from Generalitat Valenciana, European Union (European Social Fund. Investing in Your Future) through grant CIACIF/2022/255. This work has been carried out as part of the active participation in the Educational Innovation Group Multidisciplinary Teaching Innovation Methodology (Teach-Inn) (GIE-64) of the University of Las Palmas de Gran Canaria.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of thermal effects on the optomechanical coupling rate in acousto-optic cavities

  • Ortiz-Fernández, Raúl|||0000-0002-4998-0201
  • Mercadé, Laura|||0000-0002-4994-7727
  • Grau-Martínez, Alberto|||0000-0002-2411-1317
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Navarro-Urrios, Daniel
[EN] Optomechanical (OM) cavities simultaneously localize photons and phonons, thus enhancing their mutual interaction through radiation-pressure force. This acousto-optic interaction can be quantified by means of the optical-frequency shift per mechanical displacement G . The aforesaid frequency shift can also be related to the vacuum OM coupling rate g 0 , where only photoelastic and moving-boundary effects are commonly taken into account. However, the thermo-optic and thermal-expansion effects may also play a role since the material forming the OM cavity could be heated by the presence of photons, which should naturally affect the mechanical properties of the cavity. In this work, we introduce a theoretical approach to determine how thermal effects change the canonical OM coupling rate. To test the model, a complete set of optical-thermal-mechanical simulations was performed in two OM crystal cavities fabricated from two different materials: silicon and diamond. Our results lead us to conclude that there is a non-negligible thermal correction that is always present as a negative shift to the OM coupling rate that should be considered in order to predict more accurately the strength of the OM interaction., The authors thank J. Maire, N. Capuj, C. Milian, and E. Verhagen for useful discussions. The authors acknowledge funding from Generalitat Valenciana (GVA, CIACIF/2021/006), the European Union ( NextGenerationEU /PRTR and ERDF A way of making Europe ), and the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) under project Grants No. PID2021-124618NB-C21 (ALLEGRO) and No. PCI2022-135003-2 (MUSICIAN).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Densification and performance optimization of NaSICON solid electrolytes via a low-temperature cold sintering process with sodium ionic salt doping

  • Ferrer-Nicomedes, Sergio
  • Vicente-Agut, Nuria
  • Barba-Juan, Antonio
  • Mormeneo-Segarra, Andrés|||0000-0002-8827-3649
[EN] Sodium-ion batteries (SIBs) have emerged as a sustainable alternative to lithium-ion systems, offering cost-effective and environmentally friendly energy storage solutions. Solid-state electrolytes (SSEs), particularly NaSICON-type materials such as Na3.4Zr1.9Zn0.1Si2.2P0.8O12 (NZZSP) studied here, are critical for enhancing the safety and stability of SIBs. However, conventional high-temperature sintering methods for fabricating these electrolytes are energy-intensive and environmentally impactful. In this work, we employed the Cold Sintering Process (CSP) to densify NZZSP at a low temperature of 150 °C under 720 MPa with the aid of a transient liquid phase (TLP), achieving a sustainable electrolyte production with competitive performance. The effects of milling time and two different TLP media were evaluated, with 3 M acetic acid solution (HAc) being more effective than 25 mM sodium hydroxide solution (NaOH) in preserving particle integrity and yielding higher ionic conductivity (0.50 mS cm¿1). Doping with NaPF6 and NaTFSI further enhanced performance, with 20% NaPF6-doped samples achieving the highest densification (94.3%) and conductivity (0.80 mS cm¿1). Optimized 2 hour-milled, 20% NaPF6 electrolytes demonstrated suitable cycling stability in symmetric cells (over 500 hours) and specific capacity in half cells, with Na metal and Na3V2(PO4)3 (NVP) as electrodes, of about 85 mA h gNVP ¿1 at C/2 and over 100 mA h gNVP ¿1 at C/10 after cycling at multiple rates. These results underscore the potential of the CSP as a sustainable, low-temperature alternative for fabricating high-performance solid-state electrolytes for application in all solid-state sodium batteries., This work has received funding from Generalitat Valenciana under Pla Complementari "Programa de Materials Avancats", 2022 (grant number MFA/2022/030). A. B.-J. acknowledges the financial support from Ministerio de Ciencia e Innovacion (Spain) grant number. MCIN/AEI/10.13039/501100011033. N. V.-A. acknowledges the support for the research from Universitat Jaume I under the project number UJI/2023/016. A. M.-S. and S. F.-N. thank Generalitat Valenciana for the FPI Fellowship Program (grant numbers ACIF/2021/294 and CIACIF/2021/050).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Artificial Intelligence-Driven Aircraft Systems to Emulate Autopilot and GPS Functionality in GPS-Denied Scenarios Through Deep Learning

  • García-Gascón, César|||0009-0007-6772-0474
  • Castelló-Pedrero, Pablo|||0000-0002-6927-6430
  • García Manrique, Juan Antonio|||0000-0001-9507-0746
  • Chinesta-Soria, Francisco
[EN] This paper presents a methodology for training a Deep Learning model aimedat flight management tasks in a fixed-wing unmanned aerial vehicle (UAV), specifically autopilot control and GPS prediction. In this formulation, sensor data and the most recent GPS signal are first processed by an LSTM to produce an initial coordinate prediction. This preliminary estimate is then merged with additional sensor inputs and passed to an MLP, which replaces the conventional autopilot algorithm by generating the control commands for real-time navigation. The approach is particularly valuable in scenarios where the aircraft must follow a predetermined route¿such as surveillance operations¿or maintain a remote ground link under varying GPS availability. The study focuses on Class I UAVs; however, the proposed methodology can be adapted to larger classes (II and III) by adjusting sensor configurations and network parameters. To collect training data, a small fixed-wing aircraft was instrumented to record kinematic and control inputs, which then served as inputs to the neural network. Despite the limited sensor suite and the use of an open-source flight controller (SpeedyBee), the flexibility of the proposed approach allows for easy adaptation to more complex UAVs equipped with additional sensors, potentially improving prediction accuracy. The performance of the neural network, implemented in PyTorch, was evaluated by comparing its predicted data with actual flight logs. In addition, the method has been shown to be robust to both short and prolonged GPS outages, as it relies on waypoint-based navigation along previously explored routes, ensuring reliable performance in known operational contexts., This research received partial funding from the Government of Spain under the project PID2023-151110OB-I00 and Generalitat Valenciana under CIPROM/2022/3 and CIACIF/2021/286. This research project is part of the programme DesCartes and is supported by the National Research Foundation, Prime Minister s Office, Singapore under its Campus for Research Excellence and Technological Enterprise (CREATE) programme. Funding for open access charge: Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

GIGANTEA adjusts the response to shade at dusk by directly impinging on PHYTOCHROME INTERACTING FACTOR 7 function

  • Martínez-Vasallo, Carlos
  • Cole, Benjamin
  • Pérez-Castillo, Jaime
  • Chory, Joanne
  • Kay, Steve A.
  • Ortiz-Ramirez, Clara Inés
  • Gallego Bartolomé, Javier
  • Nohales, Maria A.
[EN] For plants adapted to bright light, a decrease in the amount of light received can be detrimental to their growth and survival. Consequently, in response to shade from surrounding vegetation, they initiate a suite of molecular and morphological changes known as the shade avoidance response through which stems and petioles elongate in search for light. Under sunlight-night cycles, the plant's responsiveness to shade varies across the day, being maximal at dusk time. While a role for the circadian clock in this regulation has long been proposed, mechanistic understanding of how it is achieved is incomplete. Here, we show that the clock component GIGANTEA (GI) directly interacts with the key player in the response to shade. GI represses PIF7 transcriptional activity and the expression of its target genes in response to shade, thereby fine- tuning the magnitude of the response to limiting light conditions. We find that under light/dark cycles, this dusk. Importantly, we also show that this circuit primarily operates in epidermal cells, highlighting the relevance of tissue- specific clock- output connections for the regulation of plant development in resonance with the environment., We thank M.A. Blazquez for critical reading of the manuscript. Work in the authors' laboratories has been funded by MCIN/AEI/10.13039/501100011033 (grants RYC2018- 024108- I and PID2019-108577GA- I00 to J.G.- B. and PID2020- 119491GA- I00 to M.A.N.) , Generalitat Valenciana (grant CIDEGENT/2020/037 to M.A.N.) , and the National Institute of General Medical Sciences of the NIH (under award number R37 GM067837 to S.A.K.) . J.C. is an investigator from the Howard Hughes Medical Institute. C.M.- V. and J.P.- A. are recipients of a predoctoral fellowship from Generalitat Valenciana (CIACIF/2021/329 and CIACIF/2021/29, respectively) . M.A.N. is a CIDEGENT Distinguished Researcher (CIDEGENT/2020/037) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimization methodology combining Taguchi design and response surface method to maximize a compression ignition engine efficiency fueled with oxygenated synthetic fuel

  • García Martínez, Antonio|||0000-0001-5783-4936
  • López, J. Javier|||0000-0002-9486-2511
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Iñiguez-Barrios, Erasmo Antonio|||0009-0001-9930-7488
[EN] This research examines the potential of a synthetic e-diesel and oxymethylene dimethyl ether blend in a heavyduty single-cylinder engine. The main purpose is to find the optimal engine settings that maximize engine efficiency and minimize emissions. As the first step, a methodology was developed and applied to simplify the engine's map into five characteristic points to be representative of the World Harmonized Transient Cycle, assigning weights to each load region. This simplification reported low error estimations for fuel consumption and NOx emissions over the cycle. After obtaining the five points, a drop-in analysis was assessed, where the fuel was evaluated with the same settings as diesel, revealing more advanced and shorter combustion with great reductions in soot emissions. Then, a group of three air management and three injection parameters was selected for optimization. A novel methodology combining Taguchi Design and Response Surface Methodology is developed and applied to find the best engine settings. By integrating these two methods, the research reduced the number of required experiments if only one method were used and maintained the goal of achieving higher thermal efficiencies with the new fuel blend compared to the diesel baseline. Significant statistical results were obtained in the Taguchi design, revealing the air management factors that most affected the responses; meanwhile, second-order models with high accuracy helped in finding the best injection parameters. Subsequently, the best settings were experimentally evaluated, and optimal conditions determined by the two methods were validated, confirming the effectiveness of the methodology. Optimization results revealed an improvement of around 2% higher efficiencies for the five tested points while achieving important average reductions of 28% less in NOx with additional decreases in CO, HC, and soot levels, all outperforming traditional diesel benchmarks. Finally, a well-to-wheel analysis using the simplified cycle confirmed a substantial reduction in carbon impact when replacing diesel with this alternative fuel. The successful application of this methodology to recalibrate an engine with an alternative fuel blend shows the potential of using these fuels in existing engines and offers a novel methodology that can be escalated and applied under the engine calibration context., The authors thank Repsol S.A. for supporting this research. The author Erasmo Iniguez acknowledges the financial support from the Conselleria d'Innovacio, Universitats, Ciencia i Societat Digital de la Generalitat Valenciana under the grant "Subvenciones para la contrataci on de personal investigador predoctoral (ACIF)" (CIACIF/2022/100).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Adaptive time compressed QITE (ACQ) and its geometrical interpretation

  • Acevedo, Alberto
  • Gomez-Lurbe, Rafael
  • Ion, Luca
  • Lal Bera, Mohit
  • Mehrabankar, Somayeh
  • Pandit, Tanmoy
  • Perez, Armando
  • GARCIA ALMUDEVER, CARMEN|||0000-0002-3800-2357
  • Garcia March, Miguel Angel|||0000-0001-7092-838X
  • Martínez-Sanz, Rodrigo
  • Angles-Castillo, Andreu
[EN] Imaginary time evolution (ITE) is a well-established method for ground-state preparation, a fundamental problem in many fields such as materials science, chemistry, and optimization. Quantum ITE (QITE) approximates this evolution on quantum hardware but suffers from high circuit depth and numerous measurements. In this work we introduce adaptive-time compressed QITE (ACQ), a novel algorithm that reduces resource-cost by combining adaptive time steps with circuit compression. This approach leverages geometric insights by characterizing its relationship to geodesic trajectories with a measure that distinguishes trajectories in CPN. Recalling that ITE is a gradient flow on the complex projective plane CPN, such trajectory measures allow one to measure the deviation from geodesicity of said flow. For Hamiltonians with only two distinct eigenvalues (spectral cardiality), ITE and QITE exactly trace geodesics, this fact motivates an adaptive strategy for systems whose corresponding spectral cardinality is greater than 2, where QITE unitaries are reused until an energy increase signals departure from the ITE path. This is implemented via a line search for energy minimization. Circuit compression is achieved by approximating the sequence of QITE unitaries with a single element of a one-parameter group. Numerical simulations on the transverse field Ising model and the Heisenberg model demonstrate that ACQ achieves comparable fidelity to standard QITE while significantly reducing the number of QITE optimizations and maintaining fixed circuit depth during propagation. Gate-count estimates and an analysis of the fidelity scaling with truncation parameters are provided. A gate count and performance comparison with the state of the art method double bracket QITE is also performed., This work was supported by the project PID2023-152724NA-I00, with funding from MCIU/AEI/10.13039/501100011033 and FSE+, the Severo Ochoa Grant CEX2023-001292-S, Generalitat Valenciana grant CIPROM/2022/66, the Ministry of Economic Affairs and Digital Transformation of the Spanish Government through the QUANTUM ENIA project call-QUANTUM SPAIN project, and by the European Union through the Recovery, Transformation and Resilience Plan-NextGenerationEU within the framework of the Digital Spain 2026 Agenda, and by the CSIC Interdisciplinary Thematic Platform (PTI+) on Quantum Technologies (PTI-QTEP+). This project has also received funding from Horizon Europe EU projects MSCA-SE CaLIGOLA, Project ID: 101086123, and MSCA-DN CaLiForNIA, Project ID: 101119552.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of CuOx nanostructures in novel electrolytes under hydrodynamic conditions for photoelectrochemical applications

  • Sánchez-García, G.
  • Pérez-Calvo, A.
  • Fernández Domene, Ramón Manuel
  • Sánchez Tovar, Rita
  • Solsona, B.
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
[EN] In this work, CuOx (x = 1 and 2) nanostructures have been synthesized by electrochemical anodization in ethylene glycol based electrolytes using oxalic acid or NaF (with or without NaOH) as complexing agents. The influence of hydrodynamic conditions and time during anodization of copper have also been evaluated. A comprehensive morphological, structural, electrochemical and photoelectrochemical characterization of the nanostructures has been performed. The results revealed the convenient use of oxalic acid and 250 rpm for 5 minutes during electrochemical anodization to obtain homogeneous CuOx nanostructures formed by spheres with Cu2O as a predominant phase. Using this nanostructure as a photocathode for N2O photoelectron-reduction, almost 100% of N2O removal was achieved after 1 h, showing the improvement of the photoelectrochemical approach vs. the photo or the electro performance, The authors would like to acknowledge the Ministerio de Ciencia e Innovacion-Agencia Estatal de Investigacion through the projects PID2021-126235OB-C33 and TED2021-129555B-I00. The authors also thank the Generalitat Valenciana for CIAICO/2021/094, CIGRIS/2022/198, and CIGE/2022/166 and for the financial support (CIACIF/2021/010).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of Corrosion-Inhibiting Monolayers on the Bond Strength and Durability of Reinforced Concrete Structures Under Service Conditions

  • Monzón-Bello, Pablo
  • Vengut-Tro, Roberto|||0009-0001-8125-2570
  • Valcuende Payá, Manuel Octavio|||0000-0002-9967-1554
  • Soto Camino, Juan
[EN] Corrosion protection in reinforced concrete structures exposed to aggressive environments remains a critical challenge in civil and architectural engineering. One promising approach involves the application of corrosion-inhibiting monolayers on the reinforcement, such as those formed using 4-aminobenzoic acid. Two methods have previously been employed to generate these monolayers: one relying on the adhesion of an organic compound and the other utilising an externally modified approach via electrolysis. This study assesses the influence of this treatment on the steel-concrete bond strength and durability, both critical properties for the structural performance of reinforced concrete under service conditions. For this purpose, pull-out tests were performed on specimens subjected to load-unload cycles to analyse bond behaviour and monolayer integrity. The results indicate that these treatments do not adversely affect the bond strength between reinforcement and concrete. Furthermore, the rebars treated with the inhibitor exhibit less corrosion damage than the untreated rebars. This fact is particularly significant in the rebars treated using the natural adhesion method, with the steel section loss being 32-37% lower than in the untreated rebars. These findings support the feasibility of applying this treatment without compromising structural functionality., This research was funded by the Spanish Government, grant number BIA2016-78460-C3-3-R. The Universitat Politecnica de Valencia. The pre-doctoral scholarships granted to Roberto Vengut Tro within the programmes "Formacion de Personal Investigador" from the Universitat Politecnica de Valencia (FPI-UPV-2022) and "Personal Investigador Predoctoral" from the Generalitat Valenciana (CIACIF/2022/076).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Additively Manufactured X-Band Diplexer Using Laser Beam Powder Bed Fusion Technique

  • Voronov, Aleksandr Andreyevich|||0009-0008-4508-4400
  • Bachiller Martin, Maria Carmen|||0000-0002-5518-5060
  • Boria Esbert, Vicente E.
  • Sempere, Lluc
  • Kunowsky, Mirko
[ES] Este trabajo presenta la fabricación aditiva de un diplexor en banda X compuesto por dos filtros: uno centrado en 9,5 GHz y otro en 10,5 GHz, ambos con un ancho de banda de 250 MHz, además de un divisor de potencia. El conjunto completo se implementó en tecnología de guía de onda rectangular, fabricado en un solo bloque. Se logra una buena concordancia entre los resultados simulados y medidos, con pérdidas de retorno superiores a 20 dB, pérdidas de inserción de alrededor de 0,3 dB en ambos filtros y un aislamiento de 30 dB entre ellos. Para fines de demostración, el conjunto se utilizó para la caracterización en una cámara anecoica de la directividad, ganancia y eficiencia de radiación de una antena de bocina fabricada mediante fabricación aditiva. El diplexor se implementó utilizando tecnología Powder Bed Fusion Laser Beam (PBF-L/M) sobre una aleación metálica (AlSi10Mg). La antena de bocina se fabricó mediante tecnología de fotopolimerización en cuba por exposición a luz UV con máscara (VPP-UVM), utilizando una resina fotopolímera (Gray de Applylabwork), posteriormente metalizada. La optimización mecánica para la fabricación aditiva del diseño permite el desarrollo de un dispositivo ergonómico de una sola pieza, con cavidades internas perfectamente cuadradas. Esto reduce el peso, el volumen y los residuos de fabricación, manteniendo al mismo tiempo la respuesta electromagnética del diplexor., This work was supported in part by Valencian Innovation Agency through the Research under Project INNEST/2022/124; in part by the Ministry of Education, Culture and Universities of Valencian Community through the Predoctoral Training under Grant CIACIF/2024/405; and in part by the Conselleria de Educacion, Cultura y Universidades de la Comunidad Valenciana under Grant CIPROM/2022/019.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental COP optimization procedure in an air-based reverse Brayton cycle for cryogenic applications

  • Serrano, J.R.|||0000-0003-0692-3917
  • García-Cuevas González, Luis Miguel|||0000-0001-9340-0617
  • Gómez-Vilanova, Alejandro|||0000-0002-6627-7075
  • López-Carrillo, Juan Antonio|||0000-0003-0613-6470
[EN] Sustainable and efficient refrigerants are essential due to increasing regulatory constraints on traditional highGWP refrigerants. This study investigates the potential of natural refrigerants, specifically air, in Reverse Brayton Cycles (RBC) for low-temperature applications. Unlike carbon dioxide and ammonia, which pose limitations and safety concerns below - 40 degrees C, air offers a safer and more versatile solution due to its excellent thermodynamic properties and availability. An experimental RBC was constructed using automotive components like centrifugal compressors, a radial turbine, and inter-coolers. These cost-effective and accessible components shift the refrigeration paradigm. The RBC was tested to optimize the Coefficient of Performance (COP) at - 100 degrees C C while dissipating 2 kW, a typical scenario for whole-body cryotherapy (WBC). Key control parameters included the pressure ratio of the centrifugal compressors and the position of the stator vanes in the variable geometry turbine (VGT). The optimization process resulted in a COP increase of up to 28%. Additionally, a 1D gas-dynamic model validated these results, suggesting that different component selections could enhance performance by 17 % compared to the experimental optimum point. Air-based RBC systems using automotive components can effectively achieve temperatures below - 40 degrees C, offering a viable, eco-friendly alternative to traditional refrigerants. This advancement addresses regulatory challenges and contributes to the scientific community by providing a sustainable refrigeration solution using commercially available components and demonstrating improvements through experimental data., The authors want to acknowledge the institution "Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital de la Generalitat Valenciana"and its grant program "Subvenciones para la contratacion de personal investigador de caracter predoctoral"for doctoral studies (CIACIF/2021/404) funded by The European Union; also the institution "Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia" for the funding provided by the research project (PAID-11-22) ". This research has been supported by Grant CIPROM/2021/061 funded by Generalitat Valenciana, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Exploring design strategies for patient-specific bone scaffolds to create a uniform mechanical environment in trabecular bone

  • Andrea Fresquet Monter
  • Belda Ricardo|||0000-0003-3913-5773
  • Vercher Martínez, Ana|||0000-0003-3695-6461
  • Megías-Díaz, Raquel|||0000-0002-1698-7108
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[EN] Background and Objective: Large bone defects cannot be repaired by the inherent regeneration mechanisms of bone due to their size, which makes medical intervention essential. Current therapeutic treatments have their limitations, which has led to the study and development of bone scaffolds that maintain structural integrity during bone healing. Novel designs are required to create a mechanical environment that promote osseointegration. In this work, we aim to analyse the effect of patient-specific designs on the creation of a uniform mechanical environment in bone-scaffold constructs. Methods: Novel patient-specific Triply Periodic Minimal Surface (TPMS) structures were designed according to the characterisation of the microstructure of healthy and osteoporotic human cancellous bone to mimic morphometry. In addition, the assessment of the TPMS representative volume element size was also considered for scaffold design. The interaction between bone and scaffold was analysed through finite element model simulation. In those bone-scaffold assemblies we evaluated three different design strategies: (1) matching bone microstructure; (2) similar apparent compression elastic modulus; and (3) mimicking both the morphometry and the apparent modulus of trabecular bone. Results: The stress distribution in patient-specific TPMS scaffolds is 83.86 % similar to that of the targeted bone, significantly outperforming the 54.41 % similarity of non-patient-specific solutions. Conclusions: The design of novel patient-specific scaffolds based on a microstructure similar to cancellous bone allows a uniform stress distribution. Hence, matching both the bone morphometry and apparent elastic modulus is a key issue to reducing stress shielding phenomena and inducing osseointegration., The authors acknowledge the Ministerio de Ciencia e Innovación y Universidades and the European Regional Development Fund (FEDER) for the financial support received through the projects PID2020- 118920RB-I00 and PID2023-151610OB-C22 funded by MCIN/AEI /10.13039/501100011033, the Generalitat Valenciana PROMETEO/2021/046, CIGE/2023/110 and CIACIF/2023/454, and CRUE-Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimization of the ductile properties of poly(lactic acid) (PLA) using green citrate-based plasticizers and itaconic anhydride grafted PLA (PLA-g-IA)

  • Lázaro-Hernández, C.|||0009-0002-8250-9363
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Valerga, Ana P.
[EN] This study investigates the production of poly(lactic acid) (PLA) formulations enhanced with natural plasticizers such as triethyl citrate (TEC) and trihexyl o-butyrate citrate (BTHC). Itaconic anhydride (IA) grafted with PLA (PLA-g-IA) was obtained via reactive extrusion to serve as a compatibilizer. The incorporation of plasticizers notably enhanced the ductility of PLA while simultaneously decreasing its ultimate tensile strength and elastic modulus. Among the plasticizers tested, TEC was more effective in enhancing ductility and energy absorption, as evidenced by increased impact resistance in Charpy tests. The addition of PLA-g-IA further improved the mechanical strength of the plasticized samples without sacrificing ductility. This enhancement is attributed to the higher reactivity of BTHC with itaconic anhydride (IA) groups. The addition of plasticizers lowered the glass transition temperature from 59.6 ºC to as low as 26.6 ºC, increasing chain mobility even at room temperature. Changes in chain mobility were also observed in the thermomechanical properties, resulting in a rubbery state under ambient conditions. Higher plasticizer content improved the speed of recovery immediately after activation. Morphological analyses supported these findings, confirming that combining PLA with natural plasticizers and utilizing PLA-g-IA can effectively tailor material properties. This approach offers a simplified processing method while enhancing performance., This research is a part of the grant PID2023-152869OB-C22, and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR. The authors also thank Generalitat Valenciana-GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. J. Ivorra-Martinez thanks Generalitat Valenciana-GVA for funding a postdoc position through the CIAPOS program co-funded by ESF Investing in your future, grant number CIAPOS/2023/362. Microscopy services at UPV are also acknowledged for their help in collecting and analyzing FESEM images. C. Lazaro-Hdez thanks Generalitat Valenciana-GVA for funding a predoc position through the CIACIF program co-funded by ESF Investing in your future, grant number CIACIF/2023/244.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of End-to-End Continuous Spanish Lipreading in Different Data Conditions

  • Gimeno-Gómez, David|||0000-0002-7375-9515
  • Martínez-Hinarejos, Carlos-D.|||0000-0002-6139-2891
[EN] Visual speech recognition remains an open research problem where different challenges must be considered by dispensing with the auditory sense, such as visual ambiguities, the inter-personal variability among speakers, and the complex modeling of silence. Nonetheless, recent remarkable results have been achieved in the field thanks to the availability of large-scale databases and the use of powerful attention mechanisms. Besides, multiple languages apart from English are nowadays a focus of interest. This paper presents noticeable advances in automatic continuous lipreading for Spanish. First, an end-to-end system based on the hybrid CTC/Attention architecture is presented. Experiments are conducted on two corpora of disparate nature, reaching state-of-the-art results that significantly improve the best performance obtained to date for both databases. In addition, a thorough ablation study is carried out, where it is studied how the different components that form the architecture influence the quality of speech recognition. Then, a rigorous error analysis is carried out to investigate the different factors that could affect the learning of the automatic system. Finally, a new Spanish lipreading benchmark is consolidated., This work was partially supported by Grant CIACIF/2021/295 funded by Generalitat Valenciana and by Grant PID2021-124719OB-I00 under project LLEER (PID2021-124719OB-100) funded by MCIN/AEI/10.13039/501100011033/ and by ERDF, EU A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessing the Feasibility of Removing Graffiti from Railway Vehicles Using Ultra-Freezing Air Projection

  • Vega-Bosch, Aina|||0000-0001-6977-2373
  • Santamarina-Campos, V.|||0000-0002-6151-8271
  • Bosch-Roig, Pilar|||0000-0003-2019-399X
  • López-Carrillo, Juan Antonio|||0000-0003-0613-6470
  • Dolz, Vicente|||0000-0003-1511-6957
  • Sánchez Pons, Mercedes|||0000-0003-4653-7885
[EN] Unauthorised graffiti is a challenge in urban environments, affecting railway structures, stations, tracks, and vehicles. Inefficient cleaning methods increase the costs and downtime of railcars, limiting passenger transport. In turn, they are harmful to the operator¿s health and the environment, due to the VOCs they release. This study focuses on the feasibility of dry-ice blasting, replacing carbon dioxide with ambient air as an innovative and sustainable solution to remove graffiti from rail vehicles. Experimental tests have been carried out with 13 different aerosols, controlling the temperature (<¿80 °C), pressure (up to 3 bar), projection distance (0.5 cm) and exposure times (30¿/1¿/2¿/4¿/6¿/8¿/++). The results showed that ultra-freezing with ambient air preserved the integrity of the support materials and altered the topography, colourimetry and adhesion of the aerosols tested, achieving the total removal of one of the paints. Preliminary results suggest that ultra-freezing with ambient air could be a viable and sustainable solution for graffiti removal on railway structures, transferable to other urban environments., The authors would like to acknowledge the support received for this research from the Vice-Rectorate for Research of the Polytechnic University of Valencia (PAID-11-22), grant number PID2022-139433OB-I00, as well as the collaboration with Istobal S.A., facilitated by the ISTOBAL Chair of the Polytechnic University of Valencia (UPV). In addition, the authors would like to express their gratitude to CEICE-GVA and its grant Programme for Doctoral Studies (CIACIF/2021/404), funded by the European Union.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Evaluation of Hydrogen as a Carbon-Free Fuel for Internal Combustion Engines

  • Olcina Girona, Miguel
[ES] Se ha demostrado que las actividades humanas, responsables de generar gases de efecto invernadero, han causado el rápido aumento de la temperatura global en los últimos 200 años. Actualmente, la temperatura media de la Tierra es 1,1°C más alta que en la época preindustrial, y la última década ha sido la más cálida registrada. El cambio climático no solo implica temperaturas más altas, sino que también afecta al equilibrio del planeta, provocando sequías, escasez de agua, incendios, aumento del nivel del mar, inundaciones, deshielo polar, tormentas extremas y pérdida de biodiversidad. En este contexto, la lucha contra el cambio climático exige descarbonizar las actividades humanas que generan gases de efecto invernadero, especialmente aquellas relacionadas con la quema de combustibles fósiles, como el carbón, el petróleo y el gas. Entre las fuentes mas notables de emisiones se incluyen la energía, la industria, el transporte, la agricultura, el uso de la tierra y la deforestación. En el ámbito del transporte por carretera, han surgido distintas alternativas con el objetivo de reducir la dependencia de los combustibles convencionales como la gasolina o el diésel. Entre estas opciones destaca el uso del hidrógeno, un vector energético sin carbono en su composición química que ha despertado gran interés en aplicaciones tanto de transporte como en procesos industriales. El objetivo principal de esta tesis es analizar la aplicación del hidrógeno a motores de combustión interna alternativos. Concretamente, esta investigación tiene como propósito estudiar la transición a una economía del hidrógeno estudiando los efectos sobre la planta propulsiva, y los efectos en las emisiones globales, así como el estudio sobre los distintos sistemas de inyección de hidrógeno y en el efecto sobre el proceso de mezcla del combustible y aire. El primer paso en el estudio de la transición hacia el hidrógeno consistió en caracterizar el proceso en distintas etapas temporales, cada una con una disponibilidad específica de hidrógeno verde. Este enfoque resulta crucial para garantizar que el uso del hidrógeno contribuya efectivamente a reducir las emisiones de gases de efecto invernadero, evitando escenarios en los que las emisiones sean equivalentes o incluso superiores a las generadas por los combustibles fósiles. Cada etapa fue representada mediante mezclas específicas de combustibles fósiles e hidrógeno, simulando una transición gradual con limitaciones realistas y considerando la necesidad de desarrollar la infraestructura de producción y distribución de hidrógeno a nivel territorial. La investigación incluyó ensayos experimentales con mezclas de gas natural comprimido (CNG) e hidrógeno, además de simulaciones para evaluar los impactos de esta transición. Por último, se analizaron distintas configuraciones de inyección de hidrógeno, evaluando su influencia en el proceso de combustión y en la eficiencia de la mezcla aire-combustible. Los resultados ofrecen una perspectiva completa sobre la aplicación del hidrógeno en motores de combustión interna alternativos, proporcionando información clave para una transición energética eficiente y sostenible., [CA] S'ha demostrat que les activitats humanes, responsables de generar gasos d'efecte hivernacle, han causat l'augment ràpid de la temperatura global en els darrers 200 anys. Actualment, la temperatura mitjana de la Terra és 1,1°C més alta que en l'època preindustrial, i la darrera dècada ha estat la més càlida registrada. El canvi climàtic no només implica temperatures més altes, sinó que també afecta l'equilibri del planeta, provocant sequeres, escassetat d'aigua, incendis, augment del nivell del mar, inundacions, desglaç polar, tempestes extremes i pèrdua de biodiversitat. En aquest context, la lluita contra el canvi climàtic exigeix descarbonitzar les activitats humanes que generen gasos d'efecte hivernacle, especialment aquelles relacionades amb la crema de combustibles fòssils, com el carbó, el petroli i el gas. Entre les fonts més destacades d'emissions s'inclouen l'energia, la indústria, el transport, l'agricultura, l'ús de la terra i la desforestació. En l'àmbit del transport per carretera, han sorgit diferents alternatives amb l'objectiu de reduir la dependència dels combustibles convencionals com la gasolina o el dièsel. Entre aquestes opcions destaca l'ús de l'hidrogen, un vector energètic sense carboni en la seva composició química que ha despertat un gran interès tant en aplicacions de transport com en processos industrials. L'objectiu principal d'aquesta tesi és analitzar l'aplicació de l'hidrogen en motors de combustió interna alternatius. Concretament, aquesta investigació té com a propòsit estudiar la transició cap a una economia de l'hidrogen, analitzant els efectes sobre la planta propulsora i les emissions globals, així com els diferents sistemes d'injecció d'hidrogen i el seu impacte en el procés de barreja entre combustible i aire. El primer pas en l'estudi de la transició cap a l'hidrogen va consistir a caracteritzar el procés en diferents etapes temporals, cadascuna amb una disponibilitat específica d'hidrogen verd. Aquest enfocament resulta crucial per garantir que l'ús de l'hidrogen contribueixi efectivament a reduir les emissions de gasos d'efecte hivernacle, evitant escenaris en què les emissions siguin equivalents o fins i tot superiors a les generades pels combustibles fòssils. Cada etapa es va representar mitjançant barreges específiques de combustibles fòssils i hidrogen, simulant una transició gradual amb limitacions realistes i considerant la necessitat de desenvolupar la infraestructura de producció i distribució d'hidrogen a nivell territorial. La investigació va incloure assajos experimentals amb barreges de gas natural comprimit (CNG) i hidrogen, a més de simulacions per avaluar els impactes d'aquesta transició. Finalment, es van analitzar diferents configuracions d'injecció d'hidrogen, avaluant la seva influència en el procés de combustió i en l'eficiència de la barreja aire-combustible. Els resultats ofereixen una perspectiva completa sobre l'aplicació de l'hidrogen en motors de combustió interna alternatius, proporcionant informació clau per a una transició energètica eficient i sostenible., [EN] It has been demonstrated that human activities, particularly those responsible for generating greenhouse gases, have caused a rapid increase in global temperatures over the past 200 years. Currently, the Earth's average temperature is 1.1°C higher than during the pre-industrial era, and the last decade has been the warmest on record. Climate change not only results in higher temperatures but also disrupts the planet's balance, leading to droughts, water scarcity, wildfires, rising sea levels, flooding, polar ice melting, extreme storms, and biodiversity loss. In this context, addressing climate change requires the decarbonization of human activities that emit greenhouse gases, particularly those involving the combustion of fossil fuels such as coal, oil, and gas. Key contributors to these emissions include energy production, industrial processes, transportation, agriculture, land use, and deforestation. Within road transportation, various alternatives have emerged to reduce dependency on conventional fossil fuels such as gasoline and diesel. Among these options, hydrogen has gained prominence as a carbon-free energy carrier, attracting significant interest for its applications in transportation and industrial processes. The main goal of this thesis is to study the application of hydrogen in alternative internal combustion engines. Specifically, this research aims to explore the transition to a hydrogen economy by analyzing its effects on propulsion systems and global emissions, as well as investigating different hydrogen injection systems and their impact on the fuel-air mixing process. The first step in studying the transition to hydrogen involved characterizing the process across various time stages, each defined by the specific availability of green hydrogen. This step was crucial, as the primary goal of implementing hydrogen is to reduce greenhouse gas emissions while avoiding scenarios in which emissions are comparable to or exceed those of fossil fuels. Each stage was characterized by different blends of fossil fuels and hydrogen, simulating a realistic transition based on available infrastructure. The research included experimental tests with compressed natural gas (CNG) and hydrogen mixtures, as well as simulations to evaluate the impacts of this transition. Finally, different hydrogen injection configurations were analyzed to assess their influence on combustion dynamics and the efficiency of the fuel-air mixing process. The results provide a comprehensive perspective on the integration of hydrogen into internal combustion engine technologies, offering critical insights to facilitate an efficient and sustainable energy transition., The respondent wishes to acknowledge the financial support received through contract CIACIF/2021/437 of the Subvenciones para la contratación de personal investigador predoctoral (ACIF) of Conselleria d’Innovació, Universitats, Ciència i Societat Digital de la Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

CuOx nanostrutures synthesized under hydrodynamic conditions photoelectrochemical applications [Dataset]

  • Sánchez García, Germán
  • Pérez Calvo, Alberto
  • Fernández Domene, Ramón Manuel
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Sánchez Tovar, Rita
  • Solsona Espriu, Benjamin Eduardo
CuOx (x = 1 and 2) nanostructures have been synthesized by electrochemical anodization in ethylene glycol based electrolytes using oxalic acid or NaF (with or without NaOH) as complexing agents. The influence of hydrodynamic conditions and time during anodization of copper have also been evaluated. An electrochemical and photoelectrochemical characterization of the nanostructures has been performed.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

TinyATD: Compressing Auxiliary Tag Directories using tag hashing and set-sampling

  • Andreu-Cerezo, Pablo|||0000-0003-2070-9271
  • López Rodríguez, Pedro Juan|||0000-0003-4544-955X
  • Hernández Luz, Carles|||0000-0003-1192-6223
[EN] Auxiliary Tag Directories (ATD) are hardware structures widely analyzed in academia to estimate the interference that a task experiences when sharing a cache in a multithreaded system. ATDs are used for execution time inflation calculations, reducing power consumption in multiprocessor systems, improving cache replacement, and improving cache prefetching accuracy. However, the commercial adoption of ATD-based approaches seems to be limited due to the area overheads that they impose. We propose TinyATD, a mechanism that aims to improve state-of-the-art ATD area reduction by combining ATD set sampling and tag hashing area reduction techniques to build smaller and more precise ATDs. TinyATD achieves a 41% area reduction for the same error or a 23% error reduction for the same area over the baseline set-sampling when sampling 32 out of 2048 sets. Furthermore, TinyATD offers the stated reduction over a wide array of commonly used LLC replacement policies., The work of Pablo Andreu was supported in part by "GVA" via "Subvenciones para la contratacion de personal investigador predoctoral" under Grant CIACIF/2021/412. The work of Carles Hernandez was partially supported in part by Spanish Ministry of Science, Innovation and Universities under "Ramon y Cajal" under Grant RYC2020-030685-I. This work is partially supported via the ISOLDE European project, with grant number 101112274.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On Disjoint Dynamical Properties and Lipschitz-Free Spaces

  • Cobollo-Gómez, Christian|||0000-0002-5901-5798
  • Peris Manguillot, Alfredo|||0000-0003-1683-2373
[EN] The notion of disjoint A-transitivity for a Furstenberg family A is introduced with the aim of generalizing properties derived from disjoint hypercyclic operators. We begin a systematic study by showing some of the basic properties, including necessary conditions to inherit the property on the whole space from an invariant linearly dense set containing the origin. As a consequence, we continue the study of the link between non-linear and linear dynamics through Lipschitz-free spaces by presenting some necessary conditions to obtain disjoint A-transitivity for families of Lipschitz-free operators on F(M) expressed in terms of conditions in the underlying metric space M., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. The authors were supported by Generalitat Valenciana, under project PROMETEU/2021/070, and by MICIU/AEI/ 10.13039/ 501100011033/FEDER, UE, through Projects PID2019-105011GB-I00 and PID2022-139449NB-I00. The first author was also supported by Generalitat Valenciana, through the predoctoral fellowship CIACIF/2021/378, and by MICIU/AEI/10.13039/501100011033/FEDER, UE, through Project PID2021- 122126NB-C33. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Heating-time independent Densification of LATP via Cold Sintering Process

  • Mormeneo-Segarra, Andrés|||0000-0002-8827-3649
  • Hérisson de Beauvoir, Thomas
  • Ferrer-Nicomedes, Sergio
  • Vicente-Agut, Nuria
  • Estournès, Claude
  • Barba Juan, Antonio
[EN] The Cold Sintering Process has been used to sinter Li1.3Al0.3Ti1.7(PO4)3 powder (LATP) initially mixed with 15 wt.% of a solution of acetic acid 3 m as Transient Liquid Phase (TLP). The effect of variables such as green density, heating rate, sintering temperature, dwell time and the operating pressure on the densification of LATP via CSP has been thoroughly analysed. The operating pressure shows no effect on the green density above 450 MPa. The heating rates, thus the heating time, do not modify the densification behavior of LATP Solid-State Electrolytes (SSEs) but a decomposition reaction takes place at temperatures above 180 ºC. This reaction depends on the TLP amount still present in the pores, and at higher pressures (P>450 MPa) this decomposition effect on densification is reduced as the pore volume becomes smaller. For the first time in the CSP, a linear dependence of relative density on temperature is demonstrated., This work has received funding from Generalitat Valenciana under Pla Complementari Programa de Materials Avançats , 2022 (grant number MFA/2022/030). A.B.-J. acknowledges the financial support from Ministerio de Ciencia e Innovacion (Spain) grant number. MCIN/ AEI/10.13039/501100011033. N.V.-A. acknowledges the support for the research from Universitat Jaume I under the project number UJI/ 2023/016. A.M.-S. and S.F.-N. thank Generalitat Valenciana through FPI Fellowship Program (grant numbers ACIF/2021/294 and CIACIF/2021/ 050). A.M.-S. thanks Generalitat Valenciana through its Internship Fellowship Program for PhD students (grant number CIBEPF/2023/137).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Understanding Mechanisms of Plastid Differentiation for Biofortification of Leaves

  • Pérez-Colao, Pablo
[ES] Los isoprenoides plastídicos son una familia diversa de compuestos, muchos de los cuales desempeñan funciones clave en la fotosíntesis y la fotoprotección. Entre ellos, los carotenoides y los tocoferoles son potentes antioxidantes que también tienen relevancia nutricional como provitamina A y vitamina E, respectivamente. Las estrategias de biofortificación se han centrado tradicionalmente en mejorar la biosíntesis de estos compuestos, pero promover el desarrollo de estructuras de almacenamiento aparece como una alternativa prometedora para aumentar el contenido y la estabilidad de los isoprenoides plastídicos de interés. Aunque los mecanismos moleculares que regulan la biogénesis del cloroplasto son relativamente bien conocidos, aquellos que controlan la transformación de cloroplastos en cromoplastos u otros plastos almacenadores de metabolitos han sido mucho menos explorados. Esta tesis tiene como objetivo explorar nuevas estrategias de biofortificación basadas en crear nuevos lugares de almacenamiento de carotenoides y tocoferoles en las células vegetales, y aprender de ello en términos de los mecanismos moleculares que sustentan las transiciones plastídicas. Para abordar este objetivo, se indujo artificialmente la sobreproducción de carotenoides en distintas localizaciones celulares con el fin de determinar si la formación de estructuras de almacenamiento es un proceso programado o una respuesta emergente a la presión metabólica. Los resultados indican que la acumulación excesiva de carotenoides, incluso fuera de los plastos, supera los límites de solubilidad y desencadena una reorganización espontánea de la arquitectura celular, con la formación de nuevas membranas y compartimentos lipídicos. Estos hallazgos sugieren que los plastos almacenadores no responden necesariamente a un programa de desarrollo rígido, sino que pueden surgir como consecuencia fisicoquímica del exceso metabólico. En una segunda aproximación, se empleó un enfoque de biología química para inducir plastos almacenadores a partir de cloroplastos mediante el uso de la pequeña molécula X57. Este compuesto incrementa el contenido de tocoferoles combinando efectos de inducción biosintética, redistribución de precursores y aumento de la capacidad de almacenamiento a través de la proliferación de plastoglóbulos. El tratamiento con X57 provoca la conversión reversible de cloroplastos en plastos ricos en tocoferoles, lo que permitió analizar de forma controlada los procesos de desdiferenciación y rediferenciación plastídica. Finalmente, se demostró que X57 actúa inhibiendo la fosfatasa SAL1, lo que conduce a la acumulación de la señal retrógrada PAP y a la represión de factores clave de la identidad del cloroplasto, como GLK1, junto con una reducción en los niveles de citocininas. Esta modulación regulatoria debilita la identidad fotosintética del plasto y lo predispone a reorganizarse hacia funciones de almacenamiento en respuesta a la acumulación de metabolitos. En conjunto, los resultados muestran que la diferenciación plastídica emerge de la interacción entre presión metabólica y control regulatorio, revelando una plasticidad estructural y funcional mayor de la previamente asumida., [EN] Plastidial isoprenoids are a diverse family of compounds, many of which play key roles in photosynthesis and photoprotection. Among them, carotenoids and tocopherols are potent antioxidants with nutritional relevance as provitamin A and vitamin E, respectively. Biofortification strategies have traditionally focused on enhancing the biosynthesis of these compounds, but promoting the development of storage structures emerges as a promising alternative to increase the content and stability of plastidial isoprenoids of interest. While the molecular mechanisms regulating chloroplast biogenesis are relatively well understood, those controlling the transformation of chloroplasts into chromoplasts or other metabolite-storing plastids remain poorly explored. This thesis aims to explore new biofortification strategies based on creating novel storage sites for carotenoids and tocopherols in plant cells, and to gain insight into the molecular mechanisms underlying plastid transitions. To address this goal, carotenoid overproduction was artificially induced in different cellular compartments to assess whether storage structure formation is developmentally programmed or an emergent response to metabolic pressure. The results indicate that excessive carotenoid accumulation, even outside plastids, exceeds solubility limits and triggers a spontaneous reorganization of cellular architecture, leading to the formation of new membranes and lipid-rich compartments. These findings suggest that storage plastids can arise as a physicochemical consequence of metabolic overflow. In a second approach, a chemical biology strategy was employed to induce isoprenoid-storing plastids from chloroplasts using the small molecule X57. This compound increases tocopherol content by combining biosynthetic induction, precursor redistribution, and enhanced storage capacity through plastoglobule proliferation. This conversion process is reversible and enabled a controlled analysis of plastid dedifferentiation and redifferentiation. Finally, X57 was shown to inhibit the phosphatase SAL1, resulting in the accumulation of the retrograde signal PAP, repression of key chloroplast identity factors such as GLK1, and reduced cytokinin levels. This regulatory modulation weakens chloroplast identity and promotes plastid reorganization toward storage functions in response to metabolite accumulation. Overall, these results demonstrate that plastid differentiation emerges from the integration of metabolic pressure and regulatory permissiveness., [CA] Els isoprenoides plastídics són una família diversa de compostos, molts dels quals exerceixen funcions clau en la fotosíntesi i la fotoprotecció. Entre ells, els carotenoides i els tocoferols són potents antioxidants que també tenen rellevància nutricional com a provitamina A i vitamina E, respectivament. Les estratègies de biofortificació s'han centrat tradicionalment en millorar la biosíntesi d'aquests compostos, però promoure el desenvolupament d'estructures d'emmagatzematge apareix com una alternativa prometedora per augmentar el contingut i l'estabilitat dels isoprenoides plastídics d'interés. Tot i que els mecanismes moleculars que regulen la biogènesi del cloroplast són relativament ben coneguts, aquells que controlen la transformació de cloroplasts en cromoplasts o altres plastidis emmagatzemadors de metabòlits han estat molt menys explorats. Aquesta tesi té com a objectiu explorar noves estratègies de biofortificació basades en la creació de nous llocs d'emmagatzematge de carotenoides i tocoferols en les cèl·lules vegetals, així com aprofundir en els mecanismes moleculars que sustenten les transicions plastídiques. Per a abordar aquest objectiu, es va induir la sobreproducció artificial de carotenoides en diferents localitzacions cel·lulars per tal de determinar si la formació d'estructures d'emmagatzematge és un procés programat o una resposta emergent a la pressió metabòlica. Els resultats indiquen que una acumulació excessiva de carotenoides, fins i tot fora dels plastidis, supera els límits de solubilitat i provoca una reorganització espontània de l'arquitectura cel·lular, amb la formació de noves membranes i compartiments lipídics. Aquests resultats suggereixen que els plastidis emmagatzemadors poden sorgir com una conseqüència fisicoquímica de l'excés metabòlic. En una segona aproximació, es va utilitzar un enfocament de biologia química per induir plastidis emmagatzemadors a partir de cloroplasts mitjançant la molècula X57. Aquest compost incrementa el contingut de tocoferols combinant l'activació biosintètica, la redistribució de precursors i l'augment de la capacitat d'emmagatzematge mitjançant la proliferació de plastoglòbuls. El procés és reversible i va permetre analitzar de manera controlada la desdiferenciació i rediferenciació plastídica. Finalment, es va demostrar que X57 inhibeix la fosfatasa SAL1, provocant l'acumulació del senyal retrògrad PAP, la repressió de factors clau de la identitat del cloroplast, com GLK1, i una reducció dels nivells de citocinines. Aquesta modulació afavoreix una reorganització del plastidi cap a funcions d'emmagatzematge com a resposta a l'acumulació de metabòlits. En conjunt, els resultats mostren que la diferenciació plastídica emergeix de la integració entre pressió metabòlica i control regulador., We thank Trine B. Andersen and Jose A. Daros for materials, Jose Luis Micol for the ron1-2 mutant, Felix Kessler for the vte1 mutant, Alberto Coronado-Martın for help with protoplast isolation, and M. Rosa Rodriguez, Jose Perez-Beser and the staff at the IBMCP Metabolomics Platform for technical support. We also thank the Microscopy Section at the University of Valencia SCSIE and Maria T. Mınguez for her specialized support with electron microscopy. This work was funded by grants from Spanish MCIN/AEI/10.13039/501100011033 and European NextGeneration EU/PRTR and PRIMA programs to MR-C (PID2020-115810GB-I00 and UToPIQ-PCI2021-121941). MR-C is also supported by Generalitat Valenciana (PROMETEU/2021/056 and AGROALNEXT/2022/067) and the MCIN/AEI-funded Spanish Carotenoid Network, CaRed (RED2022-134577-T). BL acknowledges the support of the Gordon and Betty Moore Foundation (GBMF9319, grant DOI: https://doi. org/10.37807/GBMF9319), the ARC Centre of Excellence for Synthetic Biology, Twist Bioscience, and the Allen Foundation. LM and PP-C received predoctoral fellowships from La Caixa Foundation (INPhINIT program LCF/BQ/IN18/11660004) and Generalitat Valenciana (CIACIF/2021/278), respectively This work was supported by Spanish MCIN/AEI/10.13039/ 501100011033 and European NextGeneration EU/PRTR and PRIMA programs (PID2023-149584NB-I00 and UToPIQPCI2021-121941) and by grants from Generalitat Valenciana (PROMETEU/2021/056 and AGROALNEXT/2022/067) to MR-C. Our group is part of the Spanish Carotenoid Network, CaRed, funded by the MCIN/AEI (RED2022–134577-T). PP-C received a predoctoral fellowship from Generalitat Valenciana (CIACIF/2021/278). This work was funded by grants from the Spanish Agencia Estatal de Investigación (AEI, MICIU/AEI/10.13039/501100011033). Generalitat Valenciana, 'ERDF A way of making Europe' and 'European Union NextGeneration EU/PRTR' to MR-C (PID2020-115810GB-100, RED2022-134577-T, PID2023-149584NB-100 and AGROALNEXT/2022/067). JL-L (CISEJI/2022/26, CNS2023-145540, PID2021-128826OA-100 and RYC2020-029097-I) and GalChimia (RTC-2017-6019-2). PP-C received apredoctoral fellowship from the Generalitat Valenciana (CIACIF/2021/278).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ethylene brassylate as a biobased plasticizer for poly(lactic acid): Evaluation of mechanical, thermal, and biodegradation properties

  • Escriva-Faus, M.
  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
  • Mario Nicolás
  • Lázaro-Hernández, C.|||0009-0002-8250-9363
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
[EN] Poly(lactic acid) (PLA) is a bio-based polymer with high potential; however, its inherent brittleness restricts its practical applications. This work evaluates ethylene brassylate (EB), a macrocyclic diester of natural origin, as a plasticizer for PLA at 5¿20 wt%. Thermal analysis confirmed a plasticizing effect, with the glass transition temperature decreasing from 59.9 °C in neat PLA to 38.0 °C in PLA-20 EB. Mechanical tests showed that 20 wt% EB increased elongation at break from 10 % (neat PLA) to over 460 % and improved impact resistance by ~70 %. Furthermore, moisture resistance was preserved, and microscopy confirmed good miscibility with no phase separation. Under composting, degradation occurs more rapidly in proportion to EB content, reaching ~90 % mass loss after four weeks. Migration tests revealed values below 40 mg kg¿1 for PLA-EB < 10 wt% EB, whereas PLA-15 EB reached the regulatory limit. EB is therefore an efficient bio-based plasticizer for PLA, offering enhanced ductility, toughness, and biodegradation, with promising applications in sustainable packaging, especially for refrigerated and cold-chain storage., This research is a part of the grant PID2023-152869OB-C22, and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/ 501100011033 and by the European Union NextGenerationEU /PRTR. The authors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. Microscopy services at UPV are also acknowledged for their help in collecting and analyzing FESEM images. D.L. thanks Generalitat Valenciana - GVA for funding a postdoc position through the CIAPOS program cofunded by ESF Investing in your future, grant number CIAPOS/2022/140. C. Lazaro-Hdez thanks Generalitat Valenciana - GVA for funding a predoc position through the CIACIF program co-funded by ESF Investing in your future, grant number CIACIF/2023/244. M. Miranda-Pinzon thanks the Vice-rectorate for Research of the Universitat Politecnica de Valencia (UPV) for funding a predoctoral contract in the PAID-01-24 program. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparing Speaker Adaptation Methods for Visual Speech Recognition for Continuous Spanish

  • Gimeno-Gómez, David|||0000-0002-7375-9515
  • Martínez-Hinarejos, Carlos-D.|||0000-0002-6139-2891
[EN] Visual speech recognition (VSR) is a challenging task that aims to interpret speech based solely on lip movements. However, although remarkable results have recently been reached in the field, this task remains an open research problem due to different challenges, such as visual ambiguities, the intra-personal variability among speakers, and the complex modeling of silence. Nonetheless, these challenges can be alleviated when the task is approached from a speaker-dependent perspective. Our work focuses on the adaptation of end-to-end VSR systems to a specific speaker. Hence, we propose two different adaptation methods based on the conventional fine-tuning technique or the so-called Adapters. We conduct a comparative study in terms of performance while considering different deployment aspects such as training time and storage cost. Results on the Spanish LIP-RTVE database show that both methods are able to obtain recognition rates comparable to the state of the art, even when only a limited amount of training data is available. Although it incurs a deterioration in performance, the Adapters-based method presents a more scalable and efficient solution, significantly reducing the training time and storage cost by up to 80%., This work was partially supported by the Grant CIACIF/2021/295 funded by Generalitat Valenciana and by the Grant PID2021-124719OB-I00 under the LLEER (PID2021-124719OB-100) project funded by MCIN/AEI/10.13039/501100011033/ and by ERDF EU, A way of making Europe .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis and Characterization of Fully Bio-Based Butylene Succinate Oligomers with Varying Molecular Weights for Sustainable Food Packaging Applications

  • Olivas-Alonso, Carmen
  • Flores-Fernández, Yaiza
  • Chiralt, Amparo|||0000-0003-1134-8144
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Martinez de Ilarduya, Antxon
[EN] The development of bio-based and biodegradable materials is critical for reducing environmental impact and addressing global challenges associated with the extensive use of plastics in packaging applications. In this study, linear oligomers of butylene succinate (OBS) with three different molecular weights were synthesized using succinic acid (SA) and 1,4-butanediol (BDO), both monomers derived from biomass. The synthesized fully bio-based OBS samples were characterized in terms of their molecular structure, degree of polymerization, crystallinity, and thermal properties, showcasing their potential as additives for biopolymers in food packaging. Oligomers with weight-average molecular weight (Mw) values of 2050 g<middle dot>mol-1 (OBS-L), 16,150 g<middle dot>mol-1 (OBS-M), and 33,147 g<middle dot>mol-1 (OBS-H), and & ETH; values in the 1.7-1.8 range were successfully synthesized. The results showed that the thermal degradation stability of OBS slightly increased, while the crystallinity decreased with increasing molecular weight. Furthermore, the analysis of the evolution of the lattice parameters suggested that oligomers with shorter chains favored crystal organization, resulting in a crystal unit cell with denser packing., This research was funded by the Spanish Ministry of Science and Innovation (MICI), Grant No. PID2021-128749OB-C33, and Generalitat Valenciana (GVA), Grant Nos. AGROALNEXT/2022/026 and CIPROM/2021/071. Sergio Torres-Giner also acknowledges the financial support received during his Ramon y Cajal contract (RYC2019-027784-I) and Carmen Olivas-Alonso during her PhD scholarship (No. CIACIF/2021/422).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tuning polylactic acid performance using green citrate plasticizers of varying chain lengths

  • Lázaro-Hernández, C.|||0009-0002-8250-9363
  • Fenollar, Octavio|||0000-0003-4323-7414
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Stefani, Pablo M.
[EN] The addition of these plasticizers increases the chain mobility of PLA, enhancing its deformability while reducing both tensile strength and elastic modulus. Mechanical testing identified TEC at 20 wt% as the most effective formulation, achieving an elongation of 307 % and a reduction in tensile strength from 70.6 MPa (PLA) to 25.2 MPa. Formulations containing 10 wt% exhibited anti-plasticization effects, with a slight reduction in elongation from 3.4 % to 3.2 %. Thermal and thermomechanical analyses corroborated the plasticizing effect, demonstrating a decrease in glass transition temperature from 59.6 °C to 19.3 °C, which indicates sufficient chain mobility to attain a rubber-like state at room temperature. Enhanced mobility also promoted crystallization by modifying nucleation behavior, altering crystal growth dimensionality, and reducing the activation energy required. Shape memory characterization revealed a rapid initial recovery in plasticized samples; however, total recovery diminished at higher plasticizer contents near 20 %, while lower concentrations exhibited recovery rates close to 90 %. Due to their low molecular weight of the plasticizers, migration is anticipated, resulting in measurable weight loss when exposed to food simulants. This migration phenomenon is associated with an increase in free volume, which also contributes to the improved ductile properties observed in plasticized PLA., This research is a part of the grant PID2023-152869OB-C22, and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. The authors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. C. Lazaro-Hdez thanks Generalitat Valenciana - GVA for funding a predoc position through the CIACIF program co-funded by ESF Investing in your future, grant number CIACIF/2023/244. J. Ivorra-Martinez thanks Generalitat Valenciana - GVA for funding a postdoc position through the CIAPOS program co-funded by ESF Investing in your future, grant number CIAPOS/2023/362. Microscopy services at UPV are also acknowledged for their help in collecting and analyzing FESEM images. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Towards Robust Industrial Control Interpretation Through Comparative Analysis of Vision-Language Models

  • Izquierdo-Domenech, Juan|||0000-0003-0076-7001
  • Linares-Pellicer, Jordi|||0000-0002-3315-1716
  • Aliaga-Torro, Carlos|||0009-0001-0426-886X
  • Ferri-Molla, Isabel|||0009-0008-3608-9891
[EN] Industrial environments frequently rely on analog control instruments due to their reliability and robustness; however, automating the interpretation of these controls remains challenging due to variability in design, lighting conditions, and scale precision requirements. This research investigates the effectiveness of Vision¿Language Models (VLMs) for automated interpretation of industrial controls through analysis of three distinct approaches: general-purpose VLMs, fine-tuned specialized models, and lightweight models optimized for edge computing. Each approach was evaluated using two prompting strategies, Holistic-Thought Protocol (HTP) and sequential Chain-of-Thought (CoT), across a representative dataset of continuous and discrete industrial controls. The results demonstrate that the fine-tuned Generative Pre-trained Transformer 4 omni (GPT-4o) significantly outperformed other approaches, achieving low Mean Absolute Error (MAE) for continuous controls and the highest accuracy and Matthews Correlation Coefficient (MCC) for discrete controls. Fine-tuned models demonstrated less sensitivity to prompt variations, enhancing their reliability. In contrast, although general-purpose VLMs showed acceptable zero-shot performance, edge-optimized models exhibited severe limitations. This work highlights the capability of fine-tuned VLMs for practical deployment in industrial scenarios, balancing precision, computational efficiency, and data annotation requirements., Work was partially supported by Generalitat Valenciana CI-PROM/2021/077 and FPI grant CIACIF/2022/098
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pd2L4 Metal-Organic Cages with Perfluoroalkyl Edges: Ligand Design and Synthesis

  • Fiorini, Guillermo Luciano|||0000-0003-0992-9812
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Martí-Centelles, Vicente|||0000-0002-9142-9392
  • Pairault, Noel
  • Vicent, Cristian
  • McClenaghan, Nathan
[EN] Molecular cages are versatile supramolecular architectures with applications in guest encapsulation, catalysis, and sensing. This study reports the first Pd2L4 cage where vertices are bridged by-(CF2)n-chains. Cage synthesis is achieved by the self-assembly of a ligand comprising a perfluorinated alkyl chain grafted with terminal pyridines and Pd(II). While the synthesis with a ligand comprising alpha,omega-monosubstituted pyridines partially produces the desired cage, the further design of two ligands with methoxy groups at the meta or para positions relative to the N-atom greatly enhances the coordination strength between the metal centre and the pyridine group. The para-substituted ligand quantitatively yields the most stable Pd2L4 cage. These findings highlight the influence of electronic effects on coordination-driven self-assembly and provide a pathway for designing robust and functional metal-organic cages containing perfluorinated edges. Additionally, we performed host-guest experiments that show a good affinity with environmentally concerning contaminant perfluorooctanoic acid. In summary, we developed Pd2L4 metal-organic cages with perfluoroalkyl edges that show good stability and promising host-guest properties., V.M.-C. acknowledges the financial support from projects ESGENT/2024/001 and CIDEGENT/2020/031 both funded by the Generalitat Valenciana, Project PID2020-113256RA-I00 funded by MICIU/AEI/10.13039/501100011033, and Project CNS2023-144879 funded by MICIU/AEI/10.13039/501100011033, and the European Union NextGenerationEU/PRTR. R.M.-M. acknowledges the fi nancial support from Project PROMETEO CIPROM/2021/007 from the Generalitat Valenciana and project PID2021-126304OB-C41 funded by MICIU/AEI/10.13039/501100011033/and European Regional Development Fund (FEDER) A Way to Make Europe. This research was supported by CIBER-Consorcio Centro de Investigacion Biomedica en Red- (CB06/01/2012) , Instituto de Salud Carlos III, Ministerio de Ciencia e Innovacion. G.F. is grateful to the Generalitat Valenciana for Subvenciones para la contratacion de personal investigador de caracter predoctoral (ACIF) grant (CIACIF/2022/112) . NMR spectra were registered at the U26 facility of Infraestructuras Cientificas y Tecnicas Singulares (ICTS) "Infraestructura Integrada de Produccion y Caracterizacion de Nanomateriales, Biomateriales y Sistemas en Biomedicina (NANBIOSIS)."
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multimaterial PLA with tailored plasticization using fused deposition modeling for improved flexibility and shape memory recovery

  • Lázaro-Hernández, C.|||0009-0002-8250-9363
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Valerga Puerta, Ana Pilar
[EN] Purpose The purpose of this study is to develop and characterize high-performance, biodegradable polylactic acid (PLA)-based materials for advanced applications that demand increased flexibility and shape memory capabilities. By introducing triethyl citrate (TEC) as a plasticizer and leveraging multimaterial three-dimensional printing configurations, this research aimed to mitigate PLA¿s inherent brittleness and expand its functional range. Additionally, this work sought to optimize design parameters ¿ such as infill orientation and core-shell distribution ¿ to maximize mechanical strength, fracture toughness and shape recovery. Ultimately, this study aspired to broaden PLA¿s applicability in fields like biomedical devices, packaging and engineered components. Design/methodology/approach This study used fused deposition modeling to fabricate single-material and multimaterial (core-shell) samples using PLA blended with TEC at varying concentrations (0¿20 Wt%). Filaments were first compounded and then extruded into 1.75 mm diameter feedstocks. Mechanical properties were evaluated through tensile, flexural and impact tests, while shape memory behavior was quantified by bending-deformation and recovery experiments in heated water. Morphological analyses examined void formation and fracture surfaces via field emission scanning electron microscopy. Thermal transitions and melt flow indices were also characterized to elucidate the influence of plasticizer content. Findings The results of this study demonstrated that adding 20 Wt% TEC significantly enhanced elongation at break up to 174% compared to neat PLA with an elongation at break close to 2%. Plasticizer lowered the glass transition temperature from 62°C of neat PLA to around 30°C. Shape memory recovery rate above 80% in core-shell configurations was obtained, while neat PLA exhibited recovery rates around 60%. Multimaterial samples featuring soft cores and rigid shells exhibited balanced stiffness, superior impact energy absorption and more efficient shape recovery than homogeneous counterparts. Improved melt flow indices facilitated better layer adhesion, reducing voids and increasing overall part integrity. These findings underline the potential of combining plasticized PLA and careful material distribution in additive manufacturing applications. Originality/value This work provides a novel demonstration of how tailored plasticization and multimaterial three-dimensional printing can collectively expand the utility of PLA, bridging the gap between traditional rigidity and the demand for flexible, shape memory-enabled structures. By systematically studying both single-material and core-shell specimens, this research offers key insights into harnessing polymer chain mobility while preserving mechanical strength. In contrast to prior efforts focusing on either plasticization or complex geometries alone, this integrated approach presents a versatile design strategy that can be applied to a wide spectrum of engineering and biomedical solutions., This research is a part of the grant PID2023-152869OB-C22 and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR. The authors also thank Generalitat Valenciana-GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. GVA for funding a postdoc position through the CIAPOS program co-funded by ESF Investing in your future, grant number CIAPOS/2023/362. Microscopy services at UPV are also acknowledged for their help in collecting and analyzing field emission scanning electron microscopy images. GVA for funding a predoc position through the CIACIF program co-funded by ESF Investing in your future, grant number CIACIF/2023/244.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tailored design of Audio-Visual Speech Recognition models using Branchformers

  • Gimeno-Gómez, David|||0000-0002-7375-9515
  • Martínez-Hinarejos, Carlos-D.|||0000-0002-6139-2891
[EN] Recent advances in Audio¿Visual Speech Recognition (AVSR) have led to unprecedented achievements in the field, improving the robustness of this type of system in adverse, noisy environments. In most cases, this task has been addressed through the design of models composed of two independent encoders, each dedicated to a specific modality. However, while recent works have explored unified audio¿visual encoders, determining the optimal cross-modal architecture remains an ongoing challenge. Furthermore, such approaches often rely on models comprising vast amounts of parameters and high computational cost training processes. In this paper, we aim to bridge this research gap by introducing a novel audio¿visual framework. Our proposed method constitutes, to the best of our knowledge, the first attempt to harness the flexibility and interpretability offered by encoder architectures, such as the Branchformer, in the design of parameter-efficient AVSR systems. To be more precise, the proposed framework consists of two steps: first, estimating audio- and video-only systems, and then designing a tailored audio¿visual unified encoder based on the layer-level branch scores provided by the modality-specific models. Extensive experiments on English and Spanish AVSR benchmarks covering multiple data conditions and scenarios demonstrated the effectiveness of our proposed method. Even when trained on a moderate scale of data, our models achieve competitive word error rates (WER) of approximately 2.5% for English and surpass existing approaches for Spanish, establishing a new benchmark with an average WER of around 9.1%. These results reflect how our tailored AVSR system is able to reach state-of-the-art recognition rates while significantly reducing the model complexity w.r.t. the prevalent approach in the field., This work was partially supported by Generalitat Valenciana, Spain through Grant CIACIF/2021/295 and Conselleria de Educacion, Universidades y Empleo under project LightVED, funded by the PROMETEO 2024 program (CIPROM/2023/17) . It was also supported by Grant PID2021-124719OB-I00 under project LLEER, funded by MCIN/AEI and ERDF, EU "A way of making Europe".