Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 434
Encontrada(s) 5 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Total absorption γ-ray spectroscopy of the β-delayed neutron emitters 137 I and 95 Rb

  • Guadilla, Victor
  • Fraile Prieto, Luis Mario
  • Vedia Fernández, María Victoria
  • Martínez, Trinitario
The decays of the beta-delayed neutron emitters( 137)I and Rb-95 have been studied with the total absorption gamma-ray spectroscopy technique. The purity of the beams provided by the JYFLTRAP Penning trap at the ion guide isotope separator on-line facility in Jyvaskyla allowed us to carry out a campaign of isotopically pure measurements with the decay total absorption gamma-ray spectrometer, a segmented detector composed of 18 NaI(T1) modules. The contamination coming from the interaction of neutrons with the spectrometer has been carefully studied, and we have tested the use of time differences between prompt gamma rays and delayed neutron interactions to eliminate this source of contamination. Due to the sensitivity of our spectrometer, we have found a significant amount of beta intensity to states above the neutron separation energy that deexcite by gamma rays, comparable to the neutron emission probability. The competition between gamma deexcitation and neutron emission has been compared with Hauser-Feshbach calculations, and it can be understood as a nuclear structure effect. In addition, we have studied the impact of the beta-intensity distributions determined in this work on reactor decay heat and reactor antineutrino spectrum summation calculations. The robustness of our results is demonstrated by a thorough study of uncertainties and with the reproduction of the spectra of the individual modules and the module-multiplicity gated spectra. This work represents the state-of-the-art of our analysis methodology for segmented total absorption spectrometers.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ultrafast Charge and Exciton Diffusion in Monolayer Films of 9-Armchair Graphene Nanoribbons

  • Varghese, Sebin|||0000-0001-7204-7121
  • Wang, Hai I.|||0000-0003-0940-3984
  • Wuttke, Michael
  • Zhou, Yazhou
  • Müllen, Klaus|||0000-0001-6630-8786
  • Narita, Akimitsu|||0000-0002-3625-522X
  • Cummings, Aron|||0000-0003-2307-497X
  • Tielrooij, Klaas-Jan|||0000-0002-0055-6231
  • Mehew, Jake Dudley|||0000-0002-8859-9374
Determining the electronic transport properties of graphene nanoribbons is crucial for assessing their suitability for applications. So far, this has been highly challenging both through experimental and theoretical approaches. This is particularly the case for graphene nanoribbons that are prepared by chemical vapor deposition, which is a scalable and industry-compatible bottom-up growth method that results in closely packed arrays of ribbons with relatively short lengths of a few tens of nanometers. In this study, the experimental technique of spatiotemporal microscopy is applied to study monolayer films of 9-armchair graphene nanoribbons prepared using this growth method, and combined with linear-scaling quantum transport calculations of arrays of thousands of nanoribbons. Both approaches directly resolve electronic spreading in space and time through diffusion and give an initial diffusivity approaching 200 cm2 s-1 during the first picosecond after photoexcitation. This corresponds to a mobility up to 550 cm2 V-1 s-1. The quasi-free carriers then form excitons, which spread with a diffusivity of tens of cm2 s-1. The results indicate that this relatively large charge carrier mobility is the result of electronic transport not being hindered by defects nor inter-ribbon hopping. This confirms their suitability for applications that require efficient electronic transport.
Repositorio Digital de la UPF
Publicación Artículo científico (JournalArticle)

Bayesian M-Ary hypothesis testing: the meta-converse and Verdú-Han bounds are tight

  • Vazquez-Vilar, Gonzalo
  • Tauste Campo, Adrià, 1982-
  • Guillén i Fábregas, A. (Albert)
  • Martínez, Alfonso, 1973-
Two alternative exact characterizations of the minimum error probability of Bayesian M-ary hypothesis testing are derived. The first expression corresponds to the error probability of an induced binary hypothesis test and implies the tightness of the meta-converse bound by Polyanskiy et al.; the second expression is a function of an information-spectrum measure and implies the tightness of a generalized Verdú-Han lower bound. The formulas characterize the minimum error probability of several problems in information theory and help to identify the steps where existing converse bounds are loose., This work was supported in part by the European Research Council under Grant 259663, in part by the Spanish Ministry of Economy and Competitiveness under Grant FPDI-2013-18602, Grant RYC-2011-08150, and Grant TEC2012-38800-C03-03, and in part by the European Union’s 7th Framework Programme under Grant 303633 and Grant 329837.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

QUADRIVEN: A Framework for Qualitative Taxi Demand Prediction Based on Time-Variant Online Social Network Data Analysis

  • Terroso-Saenz, Fernando
  • Muñoz-Ortega, Andrés
  • Cecilia-Canales, José María|||0000-0001-5648-214X
[EN] Road traffic pollution is one of the key factors affecting urban air quality. There is a consensus in the community that the efficient use of public transport is the most effective solution. In that sense, much effort has been made in the data mining discipline to come up with solutions able to anticipate taxi demands in a city. This helps to optimize the trips made by such an important urban means of transport. However, most of the existing solutions in the literature define the taxi demand prediction as a regression problem based on historical taxi records. This causes serious limitations with respect to the required data to operate and the interpretability of the prediction outcome. In this paper, we introduce QUADRIVEN (QUalitative tAxi Demand pRediction based on tIme-Variant onlinE social Network data analysis), a novel approach to deal with the taxi demand prediction problem based on human-generated data widely available on online social networks. The result of the prediction is defined on the basis of categorical labels that allow obtaining a semantically-enriched output. Finally, this proposal was tested with different models in a large urban area, showing quite promising results with an F1 score above 0.8., This work was partially supported by the Fundacion Seneca del Centro de Coordinacion de la Investigacion de la Region de Murcia under Projects 20813/PI/18 and 20530/PDC/18 and by the Spanish Ministry of Science, Innovation and Universities under Grants TIN2016-78799-P (AEI/FEDER, UE) and RTC-2017-6389-5.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Functionalization of polyethylene with hydrolytically-stable ester groups

  • Hervàs-Arnandis, Susi
  • Oliver-Meseguer, Judit|||0000-0003-1555-3583
  • Leyva Perez, Antonio|||0000-0003-1063-5811
  • Palomar-De Lucas, Brenda
  • Bilanin-Artigado, Cristina
  • Mingueza-Verdejo, Paloma
  • Viciano, Mónica
[EN] Low-density (LD) and high-density polyethylene (HDPE), recycled or not, incorporates up to 7 wt% of ester groups after reacting either with ethyl diazoacetate (EDA) under catalytic and solvent free-reaction conditions, or with maleic anhydride (MA) and acrylates (AC) under catalytic radical conditions. The resulting upcycled polyethylene esters are hydrolytically stable at extreme pH (0-14) and can be further transformed into carboxylic acids, carboxylates, other esters and amides., Financial support by the projects PID2020-115100GB-I00 and TED2021-130465B-I00 (funded by Spanish MCIINN, MCIN/AEI/10.13039/501100011033MICIIN) is acknowledged. The work has also been funded by Generalitat Valenciana, Grupos Emergentes (GV/2021/138). AIMPLAS author thanks Instituto Valenciano de Competitividad Empresarial (IVACE) the founding from the project IMAMCA/2023/4. AIMPLAS and ITQ authors thank Agencia Valenciana d'Innovacio (AVI) and the European Union the founding of the project INNEST/2022/18. J. O.-M. acknowledges the Juan de la Cierva program for the concession of a contract (IJC2018-036514-I). S. H.-A, and C. B. and P. M.-V. thank ITQ, UPV-CSIC for the concession of a contract (FPI-2022-S2-42040 and PAID 01-20, respectively).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the local convergence study for an efficient k-step iterative method

  • Amat, Sergio
  • Argyros, Ioannis K.
  • Busquier Saez, Sonia
  • Hernández-Verón, Miguel Angel
  • Martínez Molada, Eulalia|||0000-0003-2869-4334
[EN] This paper is devoted to a family of Newton-like methods with frozen derivatives used to approximate a locally unique solution of an equation. The methods have high order of convergence but only using first order derivatives. Moreover only one LU decomposition is required in each iteration. In particular, the methods are real alternatives to the classical Newton method. We present a local convergence analysis based on hypotheses only on the first derivative. These types of local results were usually proved based on hypotheses on the derivative of order higher than two although only the first derivative appears in these types of methods (Bermficlez et al., 2012; Petkovic et al., 2013; Traub, 1964). We apply these methods to an equation related to the nonlinear complementarity problem. Finally, we find the most efficient method in the family for this problem and we perform a theoretical and a numerical study for it. (C) 2018 Elsevier B.V. All rights reserved., Research was supported in part by Programa de Apoyo a Ia investigacion de Ia fundacion Seneca-Agencia de Ciencia y Tecnologia de la Region de Murcia 19374/PI/14, by the project of Generalitat Valenciana Prometeo/2016/089 and the projects MTM2015-64382-P (MINECO/FEDER), MTM2014-52016-C2-1-P and MTM2014-52016-C2-2-P of the Spanish Ministry of Science and Innovation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Centrifugal compressor influence on condensation due to Long Route-Exhaust Gas Recirculation mixing

  • Galindo, José|||0000-0001-6068-182X
  • Navarro, Roberto|||0000-0003-2587-4954
  • Tarí, Daniel
  • García -Olivas, Guillermo
[EN] State of the art techniques for reducing pollutant emission in internal combustion engines often require local flow assessment, specially in the air management field. This work addresses the interaction between a turbo- charger compressor and the 3-way long-route EGR joint, where exhaust gases of the combustion are mixed with fresh air. A validated methodology for compressor simulation is combined with a validated condensation model for this work. Numerical simulations of two different working points with three flap positions are conducted. The influence of these operating conditions on the flow field is evaluated. Particularly, there is a connection between the mixing of both steams and the generation of water condensates, responsible for the erosion of the impeller and the loss of compressor efficiency. Moreover, neglecting the impact of the compressor presence on the condensation production is shown to be of low magnitude, so that simulations without the compressor are regarded as accurate, thus reducing the computational effort by two orders of magnitude., Daniel Taxi is partially supported through contract FPI-S2-2015-1095 of Programa de Apoyo para la Investigacion y Desarrollo (PAID) of Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Demonstration of neutrinoless double beta decay searches in gaseous xenon with NEXT

  • Novella, P.
  • Sorel, M.
  • Usón, A.
  • Adams, C.
  • Almazán, H.
  • Aparicio, B.
  • Aranburu, A. I.
  • Arazi, L.
  • Arnquist, I.J.
  • Auria-Luna, F
  • Ayet, S.
  • C.D.R. Azevedo
  • Bailey, K.
  • Rodriguez-Samaniego, Javier
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] The NEXT experiment aims at the sensitive search of the neutrinoless double beta decay in Xe-136, using high-pressure gas electroluminescent time projection chambers. The NEXT-White detector is the first radiopure demonstrator of this technology, operated in the Laboratorio Subterr & aacute;neo de Canfranc. Achieving an energy resolution of 1% FWHM at 2.6 MeV and further background rejection by means of the topology of the reconstructed tracks, NEXT-White has been exploited beyond its original goals in order to perform a neu-trinoless double beta decay search. The analysis considers the combination of 271.6 days of Xe-136-enriched data and 208.9 days of 136Xe-depleted data. A detailed background mod-eling and measurement has been developed, ensuring the time stability of the radiogenic and cosmogenic contributions across both data samples. Limits to the neutrinoless mode are obtained in two alternative analyses: a background-model-dependent approach and a novel direct background-subtraction technique, offering results with small dependence on the background model assumptions. With a fiducial mass of only 3.50 +/- 0.01 kg of Xe-136-enriched xenon, 90% C.L. lower limits to the neutrinoless double beta decay are found in the T-1/2(0 nu) > 5.5x10(23) -1.3x10(24) yr range, depending on the method. The presented techniques stand as a pro of-of-concept for the searches to be implemented with larger NEXT detectors., The NEXT Collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under Grant Agreement No. 951281-BOLD; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under Grant Agreement No. 957202-HIDDEN; the MCIN/AEI of Spain and ERDF A way of making Europe under grants PID2021-125475NB and the Severo Ochoa Program grant CEX2018-000867-S; the Generalitat Valenciana of Spain under grants PROMETEO/2021/087 and CIDEGENT/2019/049; the Department of Education of the Basque Government of Spain under the predoctoral training program non-doctoral research personnel; the Spanish la Caixa Foundation (ID 100010434) under fellowship code LCF/BQ/PI22/11910019; the Portuguese FCT under project UID/FIS/04559/2020 to fund the activities of LIBPhys-UC; the Israel Science Foundation (ISF) under grant 1223/21; the Pazy Foundation (Israel) under grants 310/22, 315/19 and 465; the US Department of Energy under contracts number DE-AC02-06CH11357 (Argonne National Laboratory), DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M), DE-SC0019054 (Texas Arlington) and DE-SC0019223 (Texas Arlington); the US National Science Foundation under award number NSF CHE 2004111; the Robert A Welch Foundation under award number Y-2031-20200401. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development and Validation of a Submodel for Thermal Exchanges in the Hydraulic Circuits of a Global Engine Model

  • Broatch, A.|||0000-0001-9991-1039
  • Olmeda, P.|||0000-0002-3161-0165
  • Martín, Jaime|||0000-0002-0496-3176
  • Salvador-Iborra, Josep
[EN] To face the current challenges of the automotive industry, there is a need for computational models capable to simulate the engine behavior under low-temperature and low-pressure conditions. Internal combustion engines are complex and have interconnected systems where many processes take place and influence each other. Thus, a global approach to engine simulation is suitable to study the entire engine performance. The circuits that distribute the hydraulic fluids -liquid fuels, coolants and lubricants- are critical subsystems of the engine. This work presents a 0D model which was developed and set up to make possible the simulation of hydraulic circuits in a global engine model. The model is capable of simulating flow and pressure distributions as well as heat transfer processes in a circuit. After its development, the thermo-hydraulic model was implemented in a physical based engine model called Virtual Engine Model (VEMOD), which takes into account all the relevant relations among subsystems. In the present paper, the thermo-hydraulic model is described and then it is used to simulate oil and coolant circuits of a diesel engine. The objective of the work is to validate the model under steady-state and transient operation, with focus on the thermal evolution of oil and coolant. For validation under steady-state conditions, 22 operating points were measured and simulated, some of them in cold environment. In general, good agreement was obtained between simulation and experiments. Next, the WLTP driving cycle was simulated starting from warmed-up conditions and from ambient temperature. Results were compared with the experiment, showing that modeled trends were close to those experimentally measured. Thermal evolutions of oil and coolant were predicted with mean errors between 0.7 °C and 2.1 °C. In particular, the warm-up phase was satisfactorily modeled., This research has been partially funded by the European Union’s Horizon 2020 Framework Programme for research, technological development and demonstration under grant agreement 723976 (“DiePeR”) and by the Spanish government under the grant agreement TRA2017-89894-R. Josep SalvadorIborra was supported by Universitat Politècnica de València through the contract FPI-S2-2016-1357 of the program PAID01-16. The authors wish to thank Renault SAS, especially P. Mallet and E. Gaïffas, for supporting this research. Jaime Monfort San Segundo is acknowledged for his helpful collaboration in the code implementation
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental study of the influence of the fuel and boundary conditions over the soot formation in multi-hole diesel injectors using high-speed color diffused back-illumination technique

  • Payri, Raul|||0000-0001-7428-5510
  • Gimeno, Jaime|||0000-0003-3317-9994
  • Cardona-Vargas, Santiago
  • Ayyapureddi, Sridhar
[EN] Two prototypes multi-hole diesel injector from a high-pressure common rail system were used to operated with diesel and n-Heptane fuels in a high-pressure and high-temperature test rig able to reach 1100 K and 15 MPa under different oxygen concentrations with the goal to study the influence of the boundary conditions on the combustion process evaluating parameters as ignition delay, lift-off length and soot formation. A novel optical set-up was implemented to visualize the soot cloud evolution in the fuel jet between 30 and 85 nun from the nozzle exit using the high-speed color diffused back-illumination technique, it was used as a result of the insertion of a high-pressure window in the injector holder opposite to the frontal window of the vessel allowing an optical arrangement in line-of-sight. The experiments performed in this work used a LED with a wavelength of 460 nm to provide information about physical of the soot properties, the results of varying the operational conditions show the reduction of soot formation with an increase in injection pressure, a reduction in ambient temperature, a reduction in oxygen concentration or a reduction in ambient density. Furthermore, fuel effect on soot formation also has been studied showing a big difference between both fuels, diesel is known to be more prone to produce soot than n-Heptane reducing the ability of the technique implemented, especially in conditions with high temperature and high density., This research has been funded by Jaguar Land Rover. The author Santiago Cardona thanks the Universitat Politecnica de Valencia for his predoctoral contract (FPI-2016-S1), which is included within the framework of Programa de Apoyo para la InvestigaciOn y Desarrollo (PAID -01-2016). We would like to thank Omar Huerta for his collaboration during the measurement campaign and laboratory work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluating surface interactions in supported imidazolium ionic liquid phases by using ultrasensitive DNP NMR and DFT studies

  • Chen, Hsueh-Ying
  • de Araujo, Bruno B.
  • Goncalves, Paulo F. B.
  • dos Santos, Francisco P.
  • Kempf, James G.
  • Dupont, Jairton
  • Chacón-Rosales, Gustavo Javier|||0000-0001-5280-608X
[EN] The intimate interaction between imidazolium-based ionic liquid (IL) salts, whether grafted or coated on silica, has been explored using low-temperature dynamic nuclear polarization (DNP) NMR and density functional theory (DFT) calculations. NMR experiments revealed interactions between resolved carbon sites on the IL and various silicon sites in the underlying surface. Such experiments are challenged by mere natural-abundance levels of C-13 (1.1%) and 29Si (4.7%) and the desire for specificity to only surface regions of the porous sample. DNP enhancements of >= 100 & times; provided excellent signal-to-noise ratios (SNRs) such that 2D NMR heteronuclear correlation (HETCOR) spectra of surface-associated molecules via both H-1-C-13 and H-1-Si-29 spectroscopy were obtained in <3 hours with SNRs of similar to 10-140 among various sites, as well as more structurally definitive direct C-13-Si-29 HETCOR with SNRs of similar to 5-10 in <3 days. These results would be impossible to obtain without noted DNP gains. These results reveal the interaction between IL and silica, whereas the NMR and DFT combination further explores the orientation of the IL with respect to the surface, altogether showing that grafting is necessary for a well-defined relationship with the silica surface. The overall results can provide guidance on structure-function relationships for applications of this class of materials in heterogeneous catalysis and beyond., CAPES (001), FAPERGS (22/2551-0000386-9), FAPESP (2020/10246-0); FGCSIC ComFuturo/Horizon 2020 program (Marie Sk & lstrok;odowska-Curie grant agreement No. 10103426); MICINN-FEDERAEI 10.13039/501100011033 (PID2021-124695OB-C21/C22 and PDC2022-133313-C21/C22), MICINN-European Union Next Generation EU-PRTR (TED2021-129626B-C21/C22) and Fundacion SENECA CARM(21884/PI/22) are gratefully acknowledged. H.Y.C. and J.G.K. also acknowledge valuable discussions with Dr Shane Pawsey of Bruker Biospin on double-CP methods.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient Integral Equation Analysis of Arbitrarily Shaped Rectangular Waveguide Discontinuities Including Conducting Objects

  • Huescar de la Cruz, Antonio Manuel
  • Oliva Aparicio, Antonio
  • Quesada Pereira, Fernando D.
  • Alvarez Melcon, Alejandro
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] In this contribution, an Integral Equation (IE) formulation is proposed for the analysis of microwave circuits, based on the junction of two different rectangular waveguides coupled by an arbitrarily shaped zero thickness discontinuity. These rectangular waveguides could include an unlimited number of conducting elements with arbitrary shapes inside them. To solve the IE, the problem is split into two equivalent subproblems, each of which is related to a rectangular waveguide. Subsequently, an equivalent surface magnetic current density (M-ap(->)) defined at the discontinuity is used to connect the equivalent problems of each rectangular waveguide. In order to reduce the number of unknowns, the Lorenz gauge Green's functions of rectangular waveguides and their spatial derivatives are used to model the boundary conditions. In addition, the Ewald method has been employed to significantly speed up the evaluation of these rectangular waveguide Green's functions. Therefore, the use of this surface magnetic current density can reduce in some configurations the number of unknowns compared to an alternative Electric Field Integral Equation (EFIE). In addition, it allows a simpler analysis of some kind of discontinuities with respect to an EFIE method. Finally, the proposed technique has been validated by comparison with the results provided by commercial full-wave software tools such as Ansys HFSS and CST Studio Suite, showing good agreement and a better numerical efficiency., This work was supported in part by the Spanish Ministerio de Ciencia, Innovacion y Universidades and the Agencia Estatal de Investigacion, European Union Next Generation Funds through Research Projects under Grant PID2022-136590OB-C42: "Design and Development of New High-Performance Components for High-Frequency Communication Systems (NEWCOSYS)" and Grant PID2022-136590OB-C41: "Advancing on Waveguide Technologies for Near-Future Satellite Communication Equipment (ADWASAT)"; in part by the Antennas and Circuits for Efficient Wireless Sensor Networks Using Low-orbit Satellites (ARIELS), under Grant TED2021-129196B-C42; in part by the Technological Demonstrator of New Radio Links between Small Satellites and Earth Stations for Advanced Digital Applications (CHILD-SAT) under Grant TED2021-129196B-C41; and in part by the Fundacion Seneca, Agencia de Ciencia y Tecnologia de la Region de Murcia, Spain, through "Componentes radiantes y de filtrado de microondas para satelites emergentes" under Project 22076/PI/22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Interactive Videos in IPTV using Hypervideo Links

  • Jimenez, Jose M.|||0000-0002-3688-7235
  • Lloret, Jaime|||0000-0002-0862-0533
  • Sendra, Sandra|||0000-0001-9556-9088
  • Abdullah, Miran Taha
[EN] One of the main advantages of Internet Protocol Television (IPTV) is the capability of full duplex communication between the Television (TV) provider and the clients which permits the interactivity of both. From this interactivity, TV providers can obtain extra information from clients. Moreover, clients can even take profit from this type of communication that allows them surfing between videos. However, this feature cannot be used in Digital Terrestrial Television (DTT). This paper shows the design and development of an interactive video for IPTV services that contains hypervideo links with additional information and content that is very useful for viewers. Furthermore, we detail the protocol used to maintain the service between the TV provider and the clients to maintain the service. Finally, the system is tested in a real scenario and the resulting measurements are provided in order to evaluate the network performance needed to offer an adequate service to each client because according to results shows, the use of hypervideo links does not imply an important increase in the ratio of packets per second., This work has been partially supported by the Postdoctoral Scholarship Contratos Postdoctorales UPV 2014 (PAID-10-14) of the Universitat Politècnica de València , by the Programa para la Formación de Personal Investigador (FPI-2015-S2-884) of the Universitat Politècnica de València .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An all-in-one point-of-care testing device for multiplexed detection of respiratory infections

  • Teixeira, William|||0000-0002-6729-9508
  • Pallás-Tamarit, Yeray|||0000-0002-1167-5631
  • Juste-Dolz, Augusto Miguel|||0000-0003-4889-6419
  • Carrascosa Rubio, Javier|||0009-0003-4615-5278
  • Maquieira, Angel|||0000-0003-4641-4957
  • Morais, Sergi|||0000-0002-3722-2358
  • Sena-Torralba, Amadeo
  • Gozalbo-Rovira, Roberto
  • Rodríguez-Díaz, Jesús
  • Navarro, David
  • Giménez-Romero, David
[EN] The impact of the COVID-19 pandemic has reinforced the need for rapid, cost-effective, and reliable point-of-care testing (POCT) devices for massive population screening. The co-circulation of SARS-CoV-2 with several seasonal respiratory viruses highlights the need for multiplexed biosensing approaches. Herein, we present a fast and robust all-in-one POCT device for parallel viral antigen and serological analysis. The biosensing approach consists of a functionalized polycarbonate disc-shaped surface with microfluidic structures, where specific bioreagents are immobilized in microarray format, and a portable optoelectronic analyzer. The biosensor quantifies the concentration of viral antigens and specific immunoglobulins G and M for SARS-CoV-2, influenza A/B, adenovirus, and respiratory syncytial virus, using 30¿¿L of a sample. The semi-automated analysis of 6 samples is performed in 30¿min. Validation studies performed with 135 serum samples and 147 nasopharyngeal specimens reveal high diagnostic sensitivity (98¿100%) and specificity (84¿98%), achieving an excellent agreement (¿¿=¿0.937) with commercial immunoassays, which complies with the World Health Organization criteria for POC COVID-19 diagnostic tests. The versatility of the POCT device paves the way for the detection of other pathogens and analytes in the incoming post-pandemic world, integrating specific bioreagents against different variants of concerns and interests., W. T and A. J-D acknowledge the financial support for the Ph.D. studies (PAID-19-01-06 and FPI-UPV 2017 grants, respectively). S.M awards grant PID2019-110713RB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe." A.M awards grant DOGV no. 8815, May 19, 2020, pp. 16712-16726. The research was also supported by the Generalitat Valenciana (PROMETEO/2020/094, Proyecto "88/2021"). The authors gratefully acknowledge the outstanding contribution of Alicia Parra, Violeta Espada, Roberto Renuncio, and Jose A. Marzal for collecting the nasopharyngeal swab samples from the Health Centre of the Universitat Politecnica de Valencia. We also gratefully thank Dr. L. Mira and G. Rios for carefully reading this manuscript and the four anonymous reviewers for their insightful comments and suggestions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An Efficient Canonical Narrowing Implementation with Irreducibility and SMT Constraints for Generic Symbolic Protocol Analysis

  • López-Rueda, Raúl|||0000-0002-2550-8041
  • Escobar Román, Santiago|||0000-0002-3550-4781
  • Sapiña-Sanchis, Julia|||0000-0003-2994-6986
[EN] Narrowing and unification are very useful tools for symbolic analysis of rewrite theories, and thus for any model that can be specified in that way. A very clear example of their application is the field of formal cryptographic protocol analysis, which is why narrowing and unification are used in tools such as Maude-NPA, Tamarin and Akiss. In this work we present the implementation of a canonical narrowing algorithm, which improves the standard narrowing algorithm, extended to be able to process rewrite theories with conditional rules. The conditions of the rules will contain SMT constraints, which will be carried throughout the execution of the algorithm to determine if the solutions have associated satisfiable or unsatisfiable constraints, and in the latter case, discard them., This work has been partially supported by the EC H2020-EU grant agreement No. 952215 (TAILOR) , by the grant PID2021-122830OB-C42 funded by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe, by the grant CIPROM/2022/6 funded by Generalitat Valenciana, and by the grant PCI2020-120708-2 funded by MICIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. Raul Lopez has been supported by the grant FPI-2022- S2-49802 funded by Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimisation of a laser-driven X-ray source operating in air

  • Reija-Vecino, Alicia
  • Coathup, Andrew
  • Alejo, Aarón
  • Bembibre, Adrián
  • Contreras-Martínez, Ramiro
  • Peñas, Juan
  • Ruiz, Camilo
  • Benlliure, Jose
  • Seimetz, Michael
[EN] X-ray sources with high photon fluxes and small source sizes have been widely pursued in the last decades. With synchrotron and XFEL facilities being complex, scarce and not easily accessible, laser-driven x-ray sources have emerged as a promising option because of their compactness, high photon yield and micrometric source size. In this work, we present the optimisation of an x-ray source driven by means of 0.8 mJ, 35 fs laser pulses focused on a solid Cu target in air. A detailed characterisation of the main x-ray beam parameters is included. A Cu K alpha flux of 2.3<middle dot>10(9) photons/s has been measured in 2 pi sr. Despite the simplicity of our setup, this flux is competitive with respect to that achieved with vacuum-based sources. A clear non-isotropic distribution of the x-ray continuum has been recorded, differing from the isotropic emission reported in dedicated studies. The beam is emitted within a cone with a semiangle of approximate to 14 degrees, directed primarily along the target normal. Given the achieved flux, this source stands as a competitive alternative to more complex laser-driven x-ray sources operating in vacuum or in a He environment. (c) 2025 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement, Funding. 'la Caixa' Foundation (LCF/BQ/PI20/11760027) ; Xunta de Galicia (ED431F2023/21, CIGUS Network of Research Centres) ; Agencia Estatal de Investigacion (PID2023-152894OA-I00, RYC2021-032654I, CEX2023-001318-M) ; Generalitat Valenciana (CIAICO/2022/008) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Circumpapillary OCT-Focused Hybrid Learning for Glaucoma Grading Using Tailored Prototypical Neural Networks

  • García-Pardo, José Gabriel
  • Verdú-Monedero, Rafael
  • Morales-Sanchez, Juan
  • del Amor, Rocío
  • Colomer, Adrián|||0000-0002-7616-6029
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
[EN] Glaucoma is one of the leading causes of blindness worldwide and Optical Coherence Tomography (OCT) is the quintessential imaging technique for its detection. Unlike most of the state-of-the-art studies focused on glaucoma detection, in this paper, we propose, for the first time, a novel framework for glaucoma grading using raw circumpapillary B-scans. In particular, we set out a new OCT-based hybrid network which combines hand-driven and deep learning algorithms. An OCT-specific descriptor is proposed to extract hand-crafted features related to the retinal nerve fibre layer (RNFL). In parallel, an innovative CNN is developed using skip-connections to include tailored residual and attention modules to refine the automatic features of the latent space. The proposed architecture is used as a backbone to conduct a novel few-shot learning based on static and dynamic prototypical networks. The k-shot paradigm is redefined giving rise to a supervised end-to-end system which provides substantial improvements discriminating between healthy, early and advanced glaucoma samples. The training and evaluation processes of the dynamic prototypical network are addressed from two fused databases acquired via Heidelberg Spectralis system. Validation and testing results reach a categorical accuracy of 0.9459 and 0.8788 for glaucoma grading, respectively. Besides, the high performance reported by the proposed model for glaucoma detection deserves a special mention. The findings from the class activation maps are directly in line with the clinicians' opinion since the heatmaps pointed out the RNFL as the most relevant structure for glaucoma diagnosis., This work has been partially funded by the following projects: [H2020-ICT-2016-2017, 732613] , DPI2016-77869-C2-1-R, PROM-ETEO/2019/109, AES2017-PI17/00771, AES2017-PI17/00821 and 20901/PI/18. The work of Gabriel Garcia has been supported by the Spanish State Research Agency PTA2017-14610-I
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A particle swarm optimization algorithm with novelty search for combustion systems with ultra-low emissions and minimum fuel consumption

  • Martínez-Rodríguez, David|||0000-0002-2093-7840
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Bracho Leon, Gabriela|||0000-0002-9198-7044
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
  • Fernandes, Cássio
  • Lucchini, Tommaso
  • Della Torre, Augusto
  • Hidalgo, J. Ignacio
[EN] The particle swarm optimization algorithm is primarily inspired by the natural behaviour of swarms and achieves important results in different applications. However, it is not exempt from stagnation in local optima and has a tendency to prematurely converge to them. Novelty Search is a concept that appeared recently in different fields of computational intelligence. It aims at exploring non-visited areas of the search space through solutions that bring novelty to already discovered solutions. The novelty of this work can be divided into two steps: on one side, this article proposes a variant of the particle swarm optimization algorithm which uses Novelty Search concepts to improve the algorithm¿s performance. Our proposal is first checked and compared using the CEC 2005 benchmark suite and then, we apply it to solve a real-world optimization problem: the design of a combustion system targeting the reduction of pollutant emissions and fuel consumption. The combustion chamber design phase usually is a complex and time-consuming process even with advanced supercomputers, since it depends on several input variables which are highly non-linear and with crossed interaction. Then, the second contribution of this work is to develop a methodology that couples a computational fluid dynamics (CFD) simulation tool with the new optimization algorithm for minimizing the specific fuel consumption of a compression-ignited engine, while constraining the NOx and soot emissions. A 3D-CFD model of the combustion system was built to predict and analyse the performance of the combustion system and hence, select the parameters with a higher impact on the system. The method reduces the computational time and includes tools for the automatic preparation of the input parameters and geometry of the system. The input parameters correspond to geometrical variables that control the bowl shape, the number of holes in the injector, the injection pressure, the swirl number and the exhaust gas recirculation rate. Results show how the simulation tool and the new PSO with Novelty Search algorithm allow us to obtain a new combustion system that minimizes the fuel consumption by 3%, simultaneously reducing NOx and soot emissions., This work has been partially supported by This work has been supported by the grant PID2020-1152 70GB I00 funded by MCIN/AEI/10.13039/501100011033; European Union FEDER funds; Spanish Ministerio de Economía y Competitividad through Grants PID2021-125549OB-I00 and PDC2022-133429-I00. The author C. S. Fernandes thanks the Universitat Politecnica de Valencia for his predoctoral contract (FPI-2019-S2- 20-555), which is included within the framework of Programa de Apoyo para la Investigacion y Desarrollo (PAID).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Coincidence summing correction factors for 238U and 232Th decay series using the Monte Carlo method

  • Ordóñez-Ródenas, José|||0000-0001-8150-4873
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • Martorell Alsina, Sebastián Salvador|||0000-0003-1706-4740
  • Ortiz Moragón, Josefina
[EN] Environmental samples analyzed in gamma spectrometry laboratories usually contain natural radionuclides such as 238U and 232Th. Using gamma spectrometry techniques is possible to estimate the activity of these radionuclides by measuring the gamma emissions of radionuclides belonging to their decay chain. Nonetheless, some of these radionuclides emit photons in cascade presenting Coincidence Summing (CS), which if not corrected, may affect the final activity quantification. The aim of this work is to apply the Monte Carlo method to calculate the True Summing Correction Factors (TSCFs) for 238U and 232Th decay series for different sample configurations (geometry and matrix) using the GEANT4 toolkit. In order to validate the results provided by GEANT4 using the RDM, the software TRUECOINC has been applied to calculate also the TSCFs. In addition, the influence of the geometry/matrix on the TSCFs is analyzed., The authors gratefully acknowledge financial support from the Catedra CSN-UPV Vicente Serradell, Spain as well as the Laboratorio de Radiactividad Ambiental (Universitat Politecnica de Valencia), Spain for the dedicated funding and resources to this research work under Grant no. FPI-2015-S2-1576
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of the injector design on the combustion noise of gasoline partially premixed combustion in a 2-stroke engine

  • Broatch, A.|||0000-0001-9991-1039
  • Margot , Xandra|||0000-0002-2639-0444
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
[EN] In this paper, a numerical Computational Fluid Dynamics (CFD) study is carried out with the purpose of understanding how the injector design may impact on the in-cylinder processes, which cause noise emission. This study is based on a combination of the gasoline partially premixed combustion concept with a new high speed direct injection 2-stroke engine, which emerges as a promising solution able to comply with nitrous oxides and particulate matter emissions standards, while ensuring combustion control and stability. The original engine configuration is varied by modifying the included spray angle and the number of injector nozzles in order to evaluate other design solutions for mitigating combustion noise. Results show that the maximum pressure time-derivative achieved during the combustion is the most influential parameter on the acoustic response of the in-cylinder noise source. However, they also evidence that for some operation conditions the resonance phenomena can enhance their contribution, thus playing a relevant role in the engine noise level. Further analysis allowed to identify three combustion related parameters, which characterise this phenomenon and allow identifying key paths to minimize its levels. (C) 2017 Elsevier Ltd. All rights reserved., The equipment used in this work has been partially supported by FEDER project funds "Dotacion de infraestructuras cientifico tecnicas para el Centro Integral de Mejora Energetica y Medioambiental de Sistemas de Transporte (CiMeT), (FEDER-ICTS-2012-06)" from the operational program of unique scientific and technical infrastructure of the Spanish Ministerio de Economia y Competitividad. J. Gomez-Soriano is partially supported by an FPI contract (FPI-S2-2016-1353) of the "Programa de Apoyo para la Investigacion y Desarrollo (PAID-01-16)" of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Smart-Distributed Pareto Front Using ev-MOGA Evolutionary Algorithm

  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
  • Blasco, Xavier|||0000-0002-9737-2833
  • Sanchís Saez, Javier|||0000-0001-9697-2696
  • Reynoso Meza, Gilberto
[EN] Obtaining multi-objective optimization solutions with a small number of points smartly distributed along the Pareto front is a challenge. Optimization methods, such as the nor- malized normal constraint (NNC), propose the use of a filter to achieve a smart Pareto front distribution. The NCC optimization method presents several disadvantages related with the procedure itself, initial condition dependency, and computational burden. In this article, the epsilon-variable multi-objective genetic algorithm (ev-MOGA) is pre- sented. This algorithm characterizes the Pareto front in a smart way and removes the disadvantages of the NNC method. Finally, examples of a three-bar truss design and controller tuning optimizations are presented for comparison purposes., This work was partially supported by the FPI-2010/19 grant and the PAID-06-11 project from the Universitat Politècnica de València, projects TIN2011-28082 and ENE2011-25900 (Spanish Ministry of Economy and Competitiveness) and the GV/2012/073 (Generalitat Valenciana).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Study of the Transient Response of Duct Junctions: Measurements and Gas-Dynamic Modeling with a Staggered Mesh Finite Volume Approach

  • Torregrosa, A. J.|||0000-0003-0933-1626
  • Broatch, A.|||0000-0001-9991-1039
  • García-Cuevas González, Luis Miguel|||0000-0001-9340-0617
  • Hernández-Marco, Manuel
[EN] Duct junctions play a major role in the operation and design of most piping systems. The objective of this paper is to establish the potential of a staggered mesh finite volume model as a way to improve the description of the effect of simple duct junctions on an otherwise one-dimensional flow system, such as the intake or exhaust of an internal combustion engine. Specific experiments have been performed in which different junctions have been characterized as a multi-port, and that have provided precise and reliable results on the propagation of pressure pulses across junctions. The results obtained have been compared to simulations performed with a staggered mesh finite volume method with different flux limiters and different meshes and, as a reference, have also been compared with the results of a more conventional pressure loss- based model. The results indicate that the staggered mesh finite volume model provides a closer description of wave dynamics, even if further work is needed to establish the optimal calculation settings., Manuel Hernandez is partially supported through contract FPI-S2-2015-1064 of Programa de Apoyo para la Investigacin y Desarrollo (PAID) of Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Re-engineering the ant colony optimization for CMP architectures

  • Cecilia-Canales, José María|||0000-0001-5648-214X
  • GARCÍA CARRASCO, JOSE MANUEL
[EN] The ant colony optimization (ACO) is inspired by the behavior of real ants, and as a bioinspired method, its underlying computation is massively parallel by definition. This paper shows re-engineering strategies to migrate the ACO algorithm applied to the Traveling Salesman Problem to modern Intel-based multi- and many-core architectures in a step-by-step methodology. The paper provides detailed guidelines on how to optimize the algorithm for the intra-node (thread and vector) parallelization, showing the performance scalability along with the number of cores on different Intel architectures, reporting up to 5.5x speedup factor between the Intel Xeon Phi Knights Landing and Intel Xeon v2. Moreover, parallel efficiency is provided for all targeted architectures, finding that core load imbalance, memory bandwidth limitations, and NUMA effects on data placement are some of the key factors limiting performance. Finally, a distributed implementation is also presented, reaching up to 2.96x speedup factor when running the code on 3 nodes over the single-node counterpart version. In the latter case, the parallel efficiency is affected by the synchronization frequency, which also affects the quality of the solution found by the distributed implementation., This work was partially supported by the Fundación Séneca, Agencia de Ciencia y Tecnología de la Región de Murcia under Project 20813/PI/18, and by Spanish Ministry of Science, Innovation and Universities as well as European Commission FEDER funds under Grants TIN2015-66972-C5-3-R, RTI2018-098156-B-C53, TIN2016-78799-P (AEI/FEDER, UE), and RTC-2017-6389-5. We acknowledge the excellent work done by Victor Montesinos while he was doing a research internship supported by the University of Murcia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multiobjective Identification of a Feedback Synthetic Gene Circuit

  • Boada-Acosta, Yadira Fernanda|||0000-0001-5677-2702
  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Picó, Jesús|||0000-0003-4144-3521
[EN] Kinetic (i.e., dynamic) semimechanistic models based on the first principles are particularly important in systems and synthetic biology since they can explain and predict the functional behavior that emerges from the time-varying concentrations in cellular components. However, gene circuit models are nonlinear higher order ones and have a large number of parameters. In addition, experimental measurements are often scarce, and enough signal excitability for identification cannot always be achieved. These characteristics render the identification problem ill-posed, so most gene circuit models present incomplete parameter identifiability. Thus, parameter identification of typical biological models still appears as an open problem, where ensemble modeling approaches and multiobjective optimization arise as natural options. We address the problem of identifying the stochastic model of a closed-loop synthetic genetic circuit designed to minimize the gene expression noise. The model results from the feedback interaction between two subsystems. Besides incomplete parameter identifiability, the closed-loop dynamics cannot be directly identified due to the lack of enough input signal excitability. We apply a two-stage approach. First, the open-loop averaged time-course experimental data are used to identify a reduced-order stochastic model of the system direct chain. Then, closed-loop steady-state stochastic distributions are used to identify the remaining parameters in the feedback configuration. In both cases, multiobjective optimization is used to address the parameter identifiability, providing sets of parameters valid for different state-space regions. The methodology gives good identification results, provides clear guidelines on the effect of the parameters under different scenarios, and it is particularly useful for easily combining time-course population averaged and steady-state single-cell distribution experimental data., This work was supported by the European Union and Spanish Government, MINECO/AEI/FEDER under Grant DPI2017-82896-C2-1-R. The work of Y. Boada was supported by the Universitat Politecnica de Valencia under Grant FPI/2013-3242.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental study of the droplet characteristics of a SCR injector spray through optical techniques

  • Bracho Leon, Gabriela|||0000-0002-9198-7044
  • Postrioti, L.
  • Moreno-Gasparotto, Armando Enrique
  • Brizi, G.
[EN] The requirement of high-fidelity experimental data of microscopic properties of sprays motivates the continuous development of optical tools, since they are determinant in the understanding of atomization and evaporation process in a variety of multiphase flows.This work compares two optical techniques and an interferometry method for the measurement of the droplet size and velocity of a spray produced by a commercial Selective Catalytic Reduction (SCR) dosing unit also known as Urea Water Solution (UWS) injector. The adequate dosing and mixing of the injected fluid is fundamental for the proper functioning of the (SCR) system, therefore studying the spray characteristics with proper techniques is important to comprehend the phenomena occurring during the injection process. The SCR system is employed in the elimination of nitrous oxides present in exhaust gases of an engine. The objective is to compare the techniques in order to obtain accurate and reliable data that can be used to validate Computational Fluid Dynamics (CFD) models and improve current exhaust geometries and mixers. The studied techniques are Phase Doppler Anemometry (PDA), High Resolution Laser Backlight Imaging (HRLBI) and High Speed Microscopic Imaging (HSMI). The PDA determines the properties of the spray, obtaining the diameter and velocity of droplets in the axis parallel to the axis of the injector. With the HRLBI frames of 2040 x 2040 pixels were captured at different instants of the injection event, achieving a spatial resolution of 7 um/pixel, allowing the visualization of the smallest droplets present in the spray. With the HSMI videos of the spray using a fast camera and a microscopic lens were recorded at 150.000 fps to measure the diameter and the velocity of the droplets in 2 directions. The measurements were carried out using water as the injected fluid at 3 different injection pressures and the results are compared to determine the limits and advantages of each technique. The droplet diameter obtained by the PDA tests is similar to the observed results in the HRLBI, whereas the HSMI missed the smaller droplets. On the other hand the droplet velocity is in good concordance in the axis parallel to the axis of the injector, proving the HSMI a suitable technique to quantify the velocity of the droplets., The equipment used for the experiments was financially supported by MEMORIA IDIFEDER/2018/037 "Diagnostico optico a alta velocidad para el estudio de procesos termo-fluidodinamicos en sistemas de inyeccion" from Generalitat Valenciana. The Dipartimento di Ingegneria -University of Perugia is also acknowledged for the support to experimental activities with Ricerca di Base -2019 Program. The author A. Moreno thanks the Universitat Politecnica de Valencia for his predoctoral contract (FPI-2018-S2-13), which is included within the framework of Programa de Apoyo para la Investigacion y Desarrollo (PAID). The Authors would like to thank Jose Enrique del Rey and Omar Huerta for their support in the experimental measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multi-objective optimization of a bottoming Organic Rankine Cycle (ORC) of gasoline engine using swash-plate expander

  • Galindo, José|||0000-0001-6068-182X
  • Climent, H.|||0000-0002-2407-5651
  • Dolz, Vicente|||0000-0003-1511-6957
  • Royo-Pascual, Lucía
This paper presents a mathematical model of a bottoming Organic Rankine Cycle coupled to a 2 l turbocharged gasoline engine to optimize the cycle from a thermo-economic and sizing point of view. These criteria were optimized with different cycle values. Therefore, a methodology to optimize the ORC coupled to Waste Heat Recovery systems in vehicle applications is presented using a multiobjective optimization algorithm. Multi-objective optimization results show that the optimum solution depend on the importance of each objective to the final solution. Considering thermo-economic criteria as the main objective, greater sizes will be required. Considering sizing criteria as the main objective, higher thermo-economic parameters will be obtained. Therefore, in order to select a single-solution from the Pareto frontier, a multiple attribute decision-making method (TOPSIS) was implemented in order to take into account the preferences of the Decision Maker. Considering the weight factors 0.5 for Specific Investment Cost (SIC), 0.3 for the area of the heat exchangers (Atot) and 0.2 for Volume Coefficient (VC) and the boundaries of this particular application, the result is optimized with values of 0.48 m2 (Atot), 2515 /kW (SIC) and 2.62 MJ/m3 (VC). Moreover, the profitability of the project by means of the Net Present Value and the Payback has been estimated., This work is part of a research project called "Evaluation of bottoming cycles in IC engines to recover waste heat energies" funded by a National Project of the Spanish Government with reference TRA2013-46408-R. Authors want to acknowledge the "Apoyo para la investigacion y Desarrollo (PAID)" grant for doctoral studies (FPI S2 2015 1067). Authors acknowledge to ModeFRONTIER (ESTECO) because its support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrochemical properties of PSFC-BCYb composites as cathodes for proton conducting solid oxide fuel cells

  • Vert Belenguer, Vicente Bernardo
  • Solis Díaz, Cecilia
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] The electrochemical properties of mixed conducing ceramic¿ceramic composites for proton conducting fuel cells have been investigated. Different ratios of Pr0.58Sr0.4Fe0.8Co0.2O3¿¿¿BaCe0.9Yb0.1O3¿¿ composites have been tested as cathodes in symmetrical cells based on BaCe0.9Y0.1O3¿¿ dense electrolytes. Impedance measurements have been carried out in the temperature range of 600¿800¿°C under wet (2.5%) air. Different dilutions on both oxygen partial pressure and water content have been performed as a function of the temperature in order to characterise the processes (surface reaction and charge transport) occurring at the composite electrode under oxidising conditions. The variation of the impedance spectra after replacing protonated water by heavy water has been studied in order to understand the role of the proton transport in the overall composite cathode operation. Additional four-point DC-conductivity measurements have been done under different atmospheres comprising different oxygen partial pressures and H2O/D2O saturation for composites and single materials., Funding from Universitat Politècnica de València (grant FPI-UPV-2007-06), the Spanish Ministry for Science and Innovation (Project ENE-2008-06302) and European Union (FP7 Project EFFIPRO – grant Agreement 227560) are kindly acknowledged. Authors are indebted to S. Jiménez for sample preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

METADOCK 2: a high-throughput parallel metaheuristic scheme for molecular docking

  • Imbernón, Baldomero
  • Serrano, Antonio
  • Bueno-Crespo, Andrés
  • Abellán, José L.
  • Pérez-Sánchez, Horacio
  • Cecilia-Canales, José María|||0000-0001-5648-214X
[EN] Motivation Molecular docking methods are extensively used to predict the interaction between protein-ligand systems in terms of structure and binding affinity, through the optimization of a physics-based scoring function. However, the computational requirements of these simulations grow exponentially with: (i) the global optimization procedure, (ii) the number and degrees of freedom of molecular conformations generated and (iii) the mathematical complexity of the scoring function. Results In this work, we introduce a novel molecular docking method named METADOCK 2, which incorporates several novel features, such as (i) a ligand-dependent blind docking approach that exhaustively scans the whole protein surface to detect novel allosteric sites, (ii) an optimization method to enable the use of a wide branch of metaheuristics and (iii) a heterogeneous implementation based on multicore CPUs and multiple graphics processing units. Two representative scoring functions implemented in METADOCK 2 are extensively evaluated in terms of computational performance and accuracy using several benchmarks (such as the well-known DUD) against AutoDock 4.2 and AutoDock Vina. Results place METADOCK 2 as an efficient and accurate docking methodology able to deal with complex systems where computational demands are staggering and which outperforms both AutoDock Vina and AutoDock 4., This work was partially supported by the Fundación Séneca del Centro de Coordinación de la Investigación de la Región de Murcia [Projects 20813/PI/ 18, 20988/PI/18, 20524/PDC/18] and by the Spanish Ministry of Science, Innovation and Universities [TIN2016-78799-P (AEI/FEDER, UE), CTQ2017-87974-R]. The authors thankfully acknowledge the computer resources at CTE-POWER and the technical support provided by Barcelona Supercomputing Center - Centro Nacional de Supercomputación [RES-BCV2018-3-0008].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Rate of injection measurements of a direct-acting piezoelectric injector for different operating temperatures

  • Payri, Raul|||0000-0001-7428-5510
  • Gimeno, Jaime|||0000-0003-3317-9994
  • Mata, Carmen
  • Viera-Sotillo, Alberto Antonio
[EN] As the regulations for pollutant emissions in diesel engines are increasingly restrictive, the introduction of the piezoelectric direct-acting injectors seeks to improve the overall efficiency of the injection system, and consequently reduce combustion contaminants. In such systems, the needle lift is governed by the charge, or voltage, applied to the piezo stack, allowing for a more precise control over the fuel injection process. Although it is known that the performance of the piezoelectric crystals depends on its temperature of operation, the effect this has on the rate of injection is still unclear. In this research, a particular setup was used to measure the rate of injection of a direct-acting injector for different operating temperatures. It was mounted into an injection discharge rate curve indicator with a particular holder that has a cooling sleeve connected to a circuit running ethylene glycol, which is driven by a thermoregulator unit. A parametric sweep of different piezo stack control voltages for three rail pressures and operating temperatures was carried out. On the results, when needle lift does not influence internal flow development, the rate of injection was controlled by the injection pressure, with minimal impact from the working temperature, resembling results from conventional hydraulic injectors. At partial needle lift, two operating regions were observed, delimited by a particular voltage level. Above it, the needle throttling was able to control mass fuel flow accurately. But below it, the stabilized rate of injection values decreased drastically. The rate of this decline was dependent only on the injection pressure. The threshold level, named critical voltage, increased linearly with increasing injection pressure and working temperature. Also, to maintain a constant fuel mass flow for decreasing operating temperature, the voltage level of the control signal had to be reduced. These results highlight the importance of monitoring and controlling the operating conditions of the direct-acting injectors, as their performance and efficiency are both influenced by the working temperature of the piezo stack., This research has been partially funded by FEDER and Spanish Ministerio de Economía y Competitividad through project TRA2015-67679-c2-1-R. Additionally, financial support to Dr. Carmen Mata was provided by Ayudas para estancias en otras universidades y centros de investigación 2017 of Universidad de Castilla la Mancha. Likewise, Alberto Viera is supported through the FPI contract 2016-S2-1361 of Programa de Apoyo para la Investigación y Desarrollo (PAID) of Universitat Poltècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental Study of Two Air Management Strategies for Emissions Control in Heavy Duty Engines at Medium to High Loads

  • Bermúdez, Vicente|||0000-0002-2781-5598
  • Molina, Santiago|||0000-0001-7879-2421
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Estepa-Ruiz, Daniel
[EN] Different air management strategies, Miller timing and internal EGR (iEGR), have been studied on internal combustion engines with the objective of decreasing NOx emissions. This paper explores heavy duty diesel engine performance by the application of both strategies separately through two different camshaft configurations, mounted and tested in the same engine. On one side, in the case of Miller timing, the early intake valve closing is explored, and on other side, for iEGR, the study is carried out opening the exhaust valve during the intake process. The engine emission and performance study is achieved through the application of a methodology which begins with the selection of the operating points focusing on medium to high loads. It continues with the exploration of different camshaft profiles by mean of a 1D model. Through the 1D model, two camshaft profiles are selected and tested in the test cell, determining the intake valve closing conditions followed by the identification of the thermodynamic behavior during the compression stroke before the injection. Later on, the combustion and emissions formation analysis is performed to conclude with the fuel consumption study for each implemented strategy taking into consideration the important influence of each camshaft profile in the pumping loop. A short discussion on the transient performance effect of each air management strategy completes the scope of the study., Daniel Estepa is partially supported through contract FPI-S2-2015-1091 of Programa de Apoyo para la Investigacion y Desarrollo (PAID) of Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Completeness in the Mackey topology by norming subspaces

  • Guirao Sánchez, Antonio José|||0000-0002-1031-3954
  • Martínez-Cervantes, G.
  • Rodríguez Ruiz, José
[EN] We study the class of Banach spaces X such that the locally convex space (X, mu(X,Y)) is complete for every norming and norm-closed subspace Y subset of X*, where mu(X, Y) denotes the Mackey topology on X associated to the dual pair < X, Y >. Such Banach spaces are called fully Mackey complete. We show that fully Mackey completeness is implied by Efremov's property (epsilon) and, on the other hand, it prevents the existence of subspaces isomorphic to l(1)(omega(1)). This extends previous results by Guirao et al. (2017) [9] and Bonet and Cascales (2010) [3]. Further examples of Banach spaces which are not fully Mackey complete are exhibited, like C[0, omega(1)] and the long James space J(omega(1)). Finally, by assuming the Continuum Hypothesis, we construct a Banach space with w*-sequential dual unit ball which is not fully Mackey complete. A key role in our discussion is played by the (at least formally) smaller class of Banach spaces X such that (Y, w*) has the Mazur property for every norming and norm-closed subspace Y subset of X*. (C) 2019 Elsevier Inc. All rights reserved., The authors wish to thank A. Aviles for valuable discussions on the topic of this paper. They are also grateful to the referee for his/her comments and suggestions. A.J. Guirao was supported by projects MTM2017-83262-C2-1-P (AEI/FEDER, UE) and 19368/PI/14 (Fundacion Seneca). G. Martinez-Cervantes and J. Rodriguez were supported by projects MTM2014-54182-P and MTM2017-86182-P (AEI/FEDER, UE) and 19275/PI/14 (Fundacion Seneca).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multiplication operators in Kothe-Bochner spaces

  • Calabuig, J. M.|||0000-0001-8398-8664
  • Sánchez Pérez, Enrique Alfonso|||0000-0001-8854-3154
  • Rodriguez, J.
Let X be a Banach space and E an order continuous Banach function space over a finite measure mu. We prove that an operator T in the Kothe-Bochner space E(X) is a multiplication operator (by a function in L(infinity)(mu)) if and only if the equality T(g < f, x*> x) = g < T(f), x*> x holds for every g is an element of L(infinity)(mu), f is an element of E(X), x is an element of X and x* is an element of X*. (C) 2010 Elsevier Inc., J.M. Calabuig was supported by MEC and FEDER (project MTM2008-04594) and Generalitat Valenciana (project GV/2009/102). J. Rodriguez was supported by MEC and FEDER (project MTM2008-05396) and Fundacion Seneca (project 08848/PI/08). E.A. Sanchez-Perez was supported by MEC and FEDER (project MTM2009-14483-C02-02). The authors were also supported by Universidad Politecnica de Valencia (project PAID-06-08-3093).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis and Raman Detection of 5-Amino-2-mercaptobenzimidazole Self-Assembled Monolayers in Nanoparticle-on-a-Mirror Plasmonic Cavity Driven by Dielectric Waveguides

  • Redolat-Querol, Javier Abilio
  • Camarena, Maria
  • Vázquez-Lozano, Juan Enrique
  • Miele, Ermanno
  • Baumberg, Jeremy J.
  • Griol Barres, Amadeu
  • Sinusia-Lozano, Miguel|||0000-0002-1744-4148
  • Gómez-Gómez, María Isabel|||0000-0001-7548-209X
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Pinilla-Cienfuegos, Elena|||0000-0002-3734-0821
[EN] Functionalization of metallic surfaces by molecular monolayers is a key process in fields such as nanophotonics or biotechnology. To strongly enhance light¿matter interaction in such monolayers, nanoparticle-on-a-mirror (NPoM) cavities can be formed by placing metal nanoparticles on such chemically functionalized metallic monolayers. In this work, we present a novel functionalization process of gold surfaces using 5-amino-2- mercaptobenzimidazole (5-A-2MBI) molecules, which can be used for upconversion from THz to visible frequencies. The synthesized surfaces and NPoM cavities are characterized by Raman spectroscopy, atomic force microscopy (AFM), and advancing¿receding contact angle measurements. Moreover, we show that NPoM cavities can be efficiently integrated on a silicon-based photonic chip performing pump injection and Raman-signal extraction via silicon nitride waveguides. Our results open the way for the use of 5-A-2MBI monolayers in different applications, showing that NPoM cavities can be effectively integrated with photonic waveguides, enabling on-chip enhanced Raman spectroscopy or detection of infrared and THz radiation., We acknowledge funding from the European Commission (THOR project, Grant Agreement No. 829067, and NextGenerationEU /PRTR and ERDF A way of making Europe ), Generalitat Valenciana under grant CIPROM/2022/14, and the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) under project grant PID2021-124618NB-C21. E.P.-C gratefully acknowledges funding from Generalitat Valenciana (Grant No. SEJIGENT/2021/039), AGENCIA ESTATAL DE INVESTIGACIO&#769;N of Ministerio de Ciencia e Innovacion (PID2021-128442NA-I00) and to the European Regional Development Fund (ERDF) (IDIFEDER/2020/041, IDIFEDER/2021/061). J.E.V.-L. acknowledges support from Juan de la Cierva&#8722;Formación fellowship FJC2021-047776-I. M.S.L. acknowledges support from the Generalitat Valenciana (Project: CIAPOS/2021/293) and AGENCIA ESTATAL DE INVESTIGACIO&#769;N of Ministerio de Ciencia e Innovacion (PID2020-118855RB-I00). J.R. acknowledges funding from Universitat Politecnica &#768; de Valencia &#768; (Grant No. FPI 20-10253).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Diseño del software de control de un UUV para monitorización oceanográfica usando un modelo de componentes y framework con despliegue flexible, Design of the control software of a UUV for oceanographic monitoring using a component model and framework with flexible deployment.

  • Ortiz, Francisco
  • Guerrero, Antonio
  • Sánchez Ledesma, Francisco
  • García Córdova, Francisco
  • Alonso, Diego
  • Gilabert, Javier
[EN] Unmanned Underwater Vehicles (UUVs) explore different habitats with a view to protecting and managing them. They are developed to overcome scientific challenges and the engineering problems caused by the unstructured and hazardous underwater environment in which they operate. Their development bears the same difficulties as the rest of service robots (hardware heterogeneity, sensor uncertainty, software complexity, etc.) as well as other particular from the domain, like the underwater environment, energy constraints, and autonomy. This article describes the AEGIR UUV, used as a test bed for implementation of control strategies and oceanographic mission in the Mar Menor area in Spain, which is one of the largest coastal lagoons in Europe. It also describes the development of a tool chain that follows a model-driven approach, which has been used in the design of the vehicle control software as well as a component-based framework that provides the runtime support of the application and enables its flexible deployment in nodes, processes and threads and pre-verification of concurrent behavior., [ES] Los vehículos submarinos no tripulados (Unmanned Underwater Vehicles, UUVs) se diseñan para misiones de monitorización, inspección e intervención. En estudios oceanográficos y de monitorización ambiental son cada vez más demandados por las innumerables ventajas que presentan con respecto a las tecnologías tradicionales. Estos vehículos son desarrollados para superar los retos científicos y los problemas de ingeniería que aparecen en el entorno no estructurado y hostil del fondo marino en el que operan. Su desarrollo no solo conlleva las mismas dificultades que el resto de los robots de servicio (heterogeneidad en el hardware, incertidumbre de los sistemas de medida, complejidad del software, etc.), sino que además se les unen las propias del dominio de aplicación, la robótica submarina: condiciones de iluminación, incertidumbre en cuanto a posición y velocidad, restricciones energéticas, etc. Este artículo describe el UUV AEGIR, un vehículo utilizado como banco de pruebas para la implementación de estrategias de control y misiones oceanográficas. También describe el desarrollo de una cadena de herramientas que sigue un enfoque dirigido por modelos, utilizada en el diseño del software de control del vehículo, así como un framework basado en componentes que proporciona el soporte de ejecución de la aplicación y permite su despliegue flexible en nodos, procesos e hilos y pre-verificación del comportamiento concurrente. Su diseño ha permitido desarrollar, comprobar y añadir los componentes que proporcionan el comportamiento necesario para que el UUV AEGIR pudiera completar con éxito distintos tipos de misiones oceanográficas., Este trabajo ha sido parcialmente financiado por el proyecto financiado por la CICYT del Gobierno Español DIVISAMOS (ref. DPI2009-14744-C03-02) y ViSelTR (ref. TIN2012-39279), así como por el proyecto financiado por la Fundación Séneca de la Región de Murcia MISSION-SICUVA (ref. 15374/PI/10) y el proyecto “Coastal Monitoring System for the Mar Menor Coastal Lagoon (PEPLAN 463.02-08 CLUSTER de la Región de Murcia. Francisco Sánchez Ledesma agradece la financiación recibida por parte del programa de becas FPU del MEC (beca AP2009-5083). Por último, los autores quieren agradecer también a la Armada Española la cesión del vehículo UUV y su posterior ayuda en su reconstrucción.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A remark on totally smooth renormings

  • Cobollo, Ch.
  • Guirao Sánchez, Antonio José|||0000-0002-1031-3954
  • Montesinos Santalucia, Vicente
[EN] E. Oja, T. Viil, andD. Werner showed, in Totally smooth renormings, Archiv der Mathematik, 112, 3, (2019), 269-281, that a weakly compactly generated Banach space ( X, center dot) with the property that every linear functional on X has a unique Hahn-Banach extension to the bidual X ** (the so-called Phelps' property U in X **, also known as the Hahn-Banach smoothness property) can be renormed to have the stronger property that for every subspace Y of X, every linear functional on Y has a unique Hahn-Banach extension to X ** (the so-called total smoothness property of the space). We mention here that this result holds in full generality -without any restriction on the space- and in a stronger form, thanks to a result ofM. Raja, On dual locally uniformly rotund norms, Israel Journal of Mathematics 129 (2002), 77-91., Supported by AEI/FEDER (project MTM2017-83262-C2-2-P of Ministerio de Economia y Competitividad), by Fundacion Seneca, Region de Murcia (Grant 19368/PI/14), and Universitat Politecnica de Valencia (A. J. Guirao). Supported by AEI/FEDER (project MTM2017-83262-C2-1-P of Ministerio de Economia y Competitividad) and Universitat Politecnica de Valencia (V. Montesinos). We thank the referees for their work, that neatly improved the original version of this note to its final form.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Measuring turbocharger compressor inlet backflow through particle image velocimetry

  • Torregrosa, A. J.|||0000-0003-0933-1626
  • Broatch, A.|||0000-0001-9991-1039
  • Pastor, José V.|||0000-0003-4113-4681
  • García-Tíscar, Jorge|||0000-0003-4934-4587
  • Sharma, Raj K.
  • Cheung, R.
[EN] An experimental measurement campaign is presented where particle image velocimetry (PIV) was used in an effort to characterize the velocity field in a turbocharger compressor when unstable operating conditions lead to flow reversing from the diffuser into the inlet pipe. Previous studies have successfully used this and similar techniques, but the most relevant results have been obtained in an open compressor where the backflow can diffuse into the ambient. In this work a glass pipe long enough to confine the full extent of the backflow has been used. Advantage was taken from the fact that this backflow is at higher temperature due to the compression process, enabling a preliminary work where a thermocouple array was used to estimate its maximum length across the compressor map. Using these results as a reference both axial and transversal velocity fields were measured. Issues associated with each one are described, along with relevant results that show how the technique correctly identifies the reversed flow, a conclusion that is supported by the comparison of the velocity average and standard deviation profiles with those of measured temperature., This work has been partially supported by Jaguar Land Rover Limited, Abbey Road, Whitley, Coventry CV3 4LF, UK. The equipment used in this work has been partially supported by the Spanish Ministerio de Economia y Competitividad through grant no DPI2015-70464-R and by FEDER - EU project funds "Dotaciem de infraestructuras cientifico tecnicas para el Centro Integral de Mejora Energetica y Medioambiental de Sistemas de Transporte (CiMeT), (FEDER-ICTS-2012-06)" framed in the operational program of unique scientific and technical infrastructure of the Spanish Ministerio de Economia y Competitividad. J. Garcia-Tiscar was partially supported through contract FPI-S22015-1530 of the Programa de Apoyo para la Investigacion y Desarrollo (PAID) of Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of Altitude and Ambient Temperature Effects on the Reactivity of Oxidation Catalysts in the Presence of H2

  • Serrano, J.R.|||0000-0003-0692-3917
  • Piqueras, P.|||0000-0002-3767-0839
  • Sanchis, Enrique José|||0000-0002-6856-8992
  • Conde-Cortabitarte, Carla|||0009-0007-8337-3935
[EN] Worldwide emission standards are now required to cover engine operation under extreme ambient conditions, which affect the raw emissions and the efficiency of the exhaust aftertreatment systems. These regulations also target new combustion technologies for decarbonization, such as neat hydrogen (H-2) combustion or dual-fuel strategies, which involve a challenge to the analysis of exhaust aftertreatment system requirements and performance. This work addresses the impact of high altitude and low ambient temperature conditions on the reactivity of an oxidation catalyst in the presence of H-2. A reaction mechanism is proposed to cover the main conversion paths of CO, HC, and H-2, including the formation and consumption of high-energy surface reaction intermediates. The mechanism has been implemented into a faster-than-real-time reduced-order model for multi-layer washcoat honeycomb catalytic converters. The model was utilized to investigate the effect of H-2 concentration on the reactivity of CO and HC within the catalyst under various operating and ambient conditions. By applying the model and examining the selectivity towards different reaction pathways in the presence of H-2, insights into surface intermediates and reactivity across different cross-sections of the monolith were obtained. This analysis discusses the underlying causes of reactivity changes promoted by H-2 and its relative importance as a function of driving boundary conditions., This research has been supported by Grant PID2020-114289RB-I00 funded by the Spanish Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033). Additionally, C. Conde thanks PhD funding from Universitat Politécnica de Valéncia through grant FPI-2022-S2-49099, which is supported by project CIPROM/2021/061 funded by Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efecto de la estratificación del agua en la estimación de la evaporación en embalses de riego

  • Molina, José Miguel
  • Gallego, Belén
  • Martínez, Victoriano
[ES] En este artículo se han empleado varios modelos (multicapa y monocapa) para estudiar las diferencias que presentan en la estimación de la temperatura y la evaporación del agua de un embalse de riego y analizar la influencia de la estratificación térmica sobre la evaporación. Los resultados obtenidos con el modelo multicapa DYRESM han mostrado una estratificación significativa durante los meses de primavera, que posteriormente disminuye durante el verano para desaparecer el resto del año. Para evaluar su influencia en el proceso de evaporación, se ha comparado con un modelo monocapa (monocapa 1), cuyos resultados han puesto de manifiesto que es posible despreciar la pequeña estratificación térmica y emplear modelos monocapa que consideren un comportamiento isotermo del embalse. Dado que las fórmulas que emplean ambos modelos para estimar la evaporación y la temperatura del agua no consideran la superficie del embalse, se ha utilizado un segundo modelo monocapa (monocapa 2), desarrollado en la Universidad Politécnica de Cartagena (España), que sí tiene en cuenta la superficie del cuerpo de agua al calcular los intercambios de calor latente y sensible con la atmósfera. Los resultados han mostrado una disminución significativa de la evaporación con el monocapa 2 (170 mm•año-1) y, consecuentemente, también se ha observado un aumento de la temperatura del agua. La importancia de las diferencias obtenidas entre los modelos monocapa hace aconsejable monitorizar un embalse para contrastar los modelos., Los autores agradecen a la Fundación Séneca (Murcia, España) la financiación de este trabajo de investigación mediante el proyecto 02978/PI/05, titulado “Desarrollo y evaluación experimental de un modelo de evaporación de agua en lámina libre. Aplicación a la mejora del aprovechamiento del agua mediante el estudio de la eficiencia de técnicas reductoras de la evaporación en embalses de riego”.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An Adaptive Frequency Strategy for Variable Speed Wind Turbines: Application to HighWind Integration Into Power Systems

  • Fernández-Guillamón, Ana
  • Villena-Lapaz, Jorge
  • Vigueras-Rodríguez, Antonio
  • Molina-García, Ángel
  • García-Sánchez, Tania María|||0000-0001-5762-5325
[EN] This paper presents a new frequency controller for variable speed wind turbines connected to the grid under power imbalance conditions. It is based on the fast power reserve emulation technique, having two different operation modes: overproduction and recovery mode. In the first mode, the active power provided by wind turbines is set over the mechanical power, reducing their rotational speed. This overproduction power is estimated according to the frequency excursion. In the second mode, the active power is established under the mechanical power to recover the initial rotational speed through a smooth trajectory. The power system considered for simulation purposes includes thermal, hydro-power and wind-power plants. The controller proposed has been evaluated under different mix-generation scenarios implemented in Matlab/Simulink. Extensive results and comparison to previous proposals are also included in the paper., This work was supported by Fundación Séneca Agencia de Ciencia y Tecnología de la Región de Murcia (ref. 19379/PI/14) and Ministerio de Educación, Cultura y Deporte of Spain (ref. FPU16/04282).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Stability preserving maps for finite-time convergence: super-twisting sliding-mode algorithm

  • Picó, Jesús|||0000-0003-4144-3521
  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Picó Marco, Enrique
  • De Battista, Hernán
The super-twisting algorithm (STA) has become the prototype of second-order sliding mode algorithm. It achieves finite time convergence by means of a continuous action, without using information about derivatives of the sliding constraint. Thus, chattering associated to traditional sliding-mode observers and controllers is reduced. The stability and finite-time convergence analysis have been jointly addressed from different points of view, most of them based on the use of scaling symmetries (homogeneity), or non-smooth Lyapunov functions. Departing from these approaches, in this contribution we decouple the stability analysis problem from that of finite-time convergence. A nonlinear change of coordinates and a time-scaling are used. In the new coordinates and time¿space, the transformed system is stabilized using any appropriate standard design method. Conditions under which the combination of the nonlinear coordinates transformation and the time-scaling is a stability preserving map are given. Provided convergence in the transformed space is faster thanO(1/¿ )¿where ¿ is the transformed time¿ convergence of the original system takes place in finite-time. The method is illustrated by designing a generalized super-twisting observer able to cope with a broad class of perturbations., This work was supported by the National University of La Plata (Project 11-1127), ANPCyT (PICT2007-005359), and CONICET (PIP112-200801-01052) of Argentina; and grants FPI-UPV/2009-21, and Cicyt-FEDER DPI2011-28112-004-01 from Spain. The material in this paper was not presented at any conference. This paper was recommended for publication in revised form by Associate Editor Zhihua Qu under the direction of Editor Andrew R. Teel.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Demonstration of background rejection using deep convolutional neural networks in the NEXT experiment

  • Kekic, M.
  • Adams, C.
  • Woodruff, K.
  • Renner, J.
  • Church, E.
  • Del Tutto, M.
  • Hernando Morata, J. A.
  • Gomez-Cadenas, J. J.
  • Arazi, L.
  • Arnquist, I.J.
  • Azevedo, C. D. R.
  • Bailey, K.
  • Benlloch-Rodriguez, J. M.
  • Rodriguez-Samaniego, Javier
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] Convolutional neural networks (CNNs) are widely used state-of-the-art computer vision tools that are becoming increasingly popular in high-energy physics. In this paper, we attempt to understand the potential of CNNs for event classification in the NEXT experiment, which will search for neutrinoless double-beta decay in Xe-136. To do so, we demonstrate the usage of CNNs for the identification of electron-positron pair production events, which exhibit a topology similar to that of a neutrinoless double-beta decay event. These events were produced in the NEXT-White high-pressure xenon TPC using 2.6 MeV gamma rays from a Th-228 calibration source. We train a network on Monte Carlo-simulated events and show that, by applying on-the-fly data augmentation, the network can be made robust against differences between simulation and data. The use of CNNs offers significant improvement in signal efficiency and background rejection when compared to previous non-CNN-based analyses, This study used computing resources from Artemisa, co-funded by the European Union through the 2014-2020 FEDER Operative Programme of the Comunitat Valenciana, project DIFEDER/2018/048. This research used resources of the Argonne Leadership Computing Facility, which is a DOE Office of Science User Facility supported under Contract DE-AC02-06CH11357. The NEXT collaboration acknowledges support from the following agencies and institutions: Xunta de Galicia (Centro singularde investigacion de Galicia accreditation 2019-2022), by European Union ERDF, and by the "Maria de Maeztu" Units of Excellence program MDM-2016-0692 and the Spanish Research State Agency"; the European Research Council (ERC) under the Advanced Grant 339787-NEXT; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under the Grant Agreements No. 674896, 690575 and 740055; the Ministerio de Economia y Competitividad and the Ministerio de Ciencia, Innovacion y Universidades of Spain under grants FIS2014-53371-C04, RTI2018-095979, the Severo Ochoa Program grants SEV-20140398 and CEX2018-000867-S; the GVA of Spain under grants PROMETEO/2016/120 and SEJI/2017/011; the Portuguese FCT under project PTDC/FIS-NUC/2525/2014 and under projects UID/FIS/04559/2020 to fund the activities of LIBPhys-UC; the U.S. Department of Energy under contracts number DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M) and DE-SC0019223/DE SC0019054 (University of Texas at Arlington); and the University of Texas at Arlington. DGD acknowledges Ramon y Cajal program (Spain) under contract number RYC-2015 18820. JMA acknowledges support from Fundacion Bancaria "la Caixa" (ID 100010434), grant code LCF/BQ/PI19/11690012. We also warmly acknowledge the Laboratori Nazionali del Gran Sasso (LNGS) and the Dark Side collaboration for their help with TPB coating of various parts of the NEXT-White TPC. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An Efficient Technique to Assess the Convergence of the Multimode Equivalent Network for Waveguide Devices

  • Gomez Molina, Celia
  • Quesada Pereira, Fernando
  • Alvarez Melcon, Alejandro
  • Guglielmi, Marco
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] Numerical methods are widely used to analyze and design microwave components for communication applications.In the implementation of any numerical technique, however, there are always a set of parameters that must be properly adjusted in order to obtain, at the same time, computational efficiency and numerical accuracy of the results. In this context, therefore, we focus in this paper on the multimode equivalent network formulation for waveguide devices, and we propose a more intuitive and efficient strategy for choosing these parameters. Following our approach, setting only one global numerical variable is sufficient to adjust automatically the specific convergence parameters of each discontinuity to give a specific level of numerical accuracy of the results. As a consequence, the computational efficiency is significantly increased. In addition, the user experience is significantly improved since our approach eliminates all lengthy convergence tests previously needed to assure good numerical accuracy. In addition to theory, we discuss in this paper a number of numerical results that clearly demonstrate how the new strategy is very effective, thereby fully validating the theoretical formulation., This work was supported in part by the Spanish Government through the Ministerio de Educacion, Cultura y Deporte under Grant FPU15/02883, in part by the Ministerio de Economia y Competitividad through the sub-projects 4 and 1 of the coordinated project under Grant TEC2016-75934-C4-R, and in part by the Fundacion Seneca de la Region de Murcia under Grant 19494/PI/14 and Grant 20147/EE/17.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving the performance of the passive pre-chamber ignition concept for spark-ignition engines fueled with natural gas

  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
  • Martínez-Hernándiz, Pablo José
  • Libert, C.
  • Rampanarivo, F.
[EN] Passive pre-chamber ignition concept has been proven to be an excellent strategy to increase the ignition energy and enhance the combustion velocity even when spark-ignition engines are operating in diluted conditions. Other benefits of this system are the increased combustion stability and combustion efficiency, reducing hydrocarbons and carbon monoxide emissions. However, these advantages are limited at some operation conditions such as low engine load or diluted conditions since both the energy available in the pre-chamber and the scavenge of combustion products are compromised. In this framework, numerical studies using two different computational tools, based on one-dimensional modeling, are utilized to gain knowledge about the governing parameters and to improve the design of a pre-chamber when the engine operates at these restrictive conditions. In particular, the impact of the pre-chamber volume, the total cross sectional area of the holes and tangential angle of the nozzles have been numerically evaluated. Different pre-chamber designs were proposed and experimentally tested in a single-cylinder, high compression ratio turbocharged spark-ignition engine fueled with compressed natural gas and operating on Miller cycle. Results give valuable insight into the key aspects of the internal geometry and some relevant design paths to follow for a suitable pre-chamber definition., The work has been partially supported by the Spanish Ministerio de Economia y Competitividad through Grant No. TRA2017-89139-C2-1-R. P.J. Martinez-Hernandiz is partially supported by an FPI contract (FPI-S2-19-21993) of the "Programa de Apoyo para la Investigacion y Desarrollo (PAID-05-19)" of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Combustion Modeling Approach for the Optimization of a Temperature Controlled Reactivity Compression Ignition Engine Fueled with Iso-Octane

  • Pelosin, Mattia
  • Spohr-Fernandes, Cássio
  • Lucchini, Tommaso
  • Marmorini, Luca
  • Zhou, Qiyan
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Bracho Leon, Gabriela|||0000-0002-9198-7044
[EN] In this study, an innovative Low Temperature Combustion (LTC) system named Temperature Controlled Reactivity Compression Ignition (TCRCI) is presented, and a numerical optimization of the hardware and the operating parameters is proposed. The studied combustion system aims to reduce the complexity of the Reaction Controlled Compression Ignition engine (RCCI), replacing the direct injection of high reactivity fuel with a heated injection of low reactivity fuel. The combustion system at the actual state of development is presented, and its characteristics are discussed. Hence, it is clear that the performances are highly limited by the actual diesel-derived hardware, and a dedicated model must be designed to progress in the development of this technology. A Computational Fluid Dynamics (CFD) model suitable for the simulation of this type of combustion is proposed, and it is validated with the available experimental operating conditions. The Particle Swarm Optimization (PSO) algorithm was integrated with the Computational Fluid Dynamic (CFD) software to optimize the engine combustion system by means of computational simulation. The operating condition considered has a relatively high load with a fixed fuel mass and compression ratio. The parameters to optimize are the piston bowl geometry, injection parameters and the boosting pressure. The achieved system configuration is characterized by a wider piston bowl and injection angle, and it is able to increase the net efficiency of 3% and to significantly reduce CO emissions from 0.407 to 0.136 mg., This research has been supported by Grant UPV-SOLGEN-79674 funded by Universitat Politecnica de Valencia. This research has been supported by Grant CIPROM/2021/061 funded by Generalitat Valenciana. The author C. S. Fernandes thanks the Universitat Politècnica de València for his predoctoral contract (FPI-2019-S2-20-555), which is included within the framework of Programa de Apoyo para la Investigación y Desarrollo (PAID).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Accurate Transfer of Individual Nanoparticles onto Single Photonic Nanostructures

  • Redolat-Querol, Javier Abilio
  • Camarena-Pérez, María
  • Xomalis, Angelos
  • Baumberg, Jeremy J.
  • Griol Barres, Amadeu
  • Kovylina-Zabyako, Miroslavna
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Pinilla-Cienfuegos, Elena|||0000-0002-3734-0821
[EN] Controlled integration of metallic nanoparticles (NPs) onto photonic nanostructures enables the realization of complex devices for extreme light confinement and enhanced light- matter interaction. For instance, such NPs could be massively integrated on metal plates to build nanoparticle-on-mirror (NPoM) nanocavities or photonic integrated waveguides (WGs) to build WG-driven nanoantennas. However, metallic NPs are usually deposited via drop-casting, which prevents their accurate positioning. Here, we present a methodology for precise transfer and positioning of individual NPs onto different photonic nanostructures. Our method is based on soft lithography printing that employs elastomeric stamp-assisted transfer of individual NPs onto a single nanostructure. It can also parallel imprint many individual NPs with high throughput and accuracy in a single step. Raman spectroscopy confirms enhanced light-matter interactions in the resulting NPoM-based nanophotonic devices. Our method mixes top-down and bottom-up nanofabrication techniques and shows the potential of building complex photonic nanodevices for multiple applications ranging from enhanced sensing and spectroscopy to signal processing., We acknowledge support from the European Research Council (ERC) under Horizon 2020 research and innovation programme THOR H2020-EU-8290 (Grant Agreement No. 829067) and PICOFORCE (Grant Agreement No. 883703) . This work was also supported by funding from Generalitat Valenciana (Grants No. PROMETEO/2019/123, BEST/2020/178 and IDIFEDER/2021/061) and the Spanish Ministry of Science and Innovation (ICTS-2017-28-UPV-9 and PGC2018-094490-BC22) . E.P.-C. gratefully acknowledges funding from Generalitat Valenciana (Grant No. SEJIGENT/2021/039). A. X . acknowledges support from the Empa internal funding scheme (IRC 2021). J.R. acknowledges funding from Universitat Politecnica de Valencia (Grant No. FPI 20-10253).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ion transport on phased radiofrequency carpets in xenon gas

  • Dey, E.
  • Jones, B. J. P.
  • Mei, Y.
  • Brodeur, M.
  • Chirayath, V. A.
  • Coward, N.
  • Foss, F. W.
  • Navarro, K. E.
  • Parmaksiz, I.
  • Adams, C.
  • Almazán, H.
  • Aparicio, B.
  • Aranburu, A. I.
  • Arazi, L.
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • García-Barrena, Jara
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] We present the design and performance of a four-phased radiofrequency (RF) carpet system for ion transport between 200–600 mbar, significantly higher than previously demonstrated RF carpet applications. The RF carpet, designed with a 160 μm pitch, is applied to the lateral collection of ions in xenon at pressures up to 600 mbar. We demonstrate transport efficiency of caesium ions across varying pressures, and compare with microscopic simulations made in the SIMION package. The novel use of an N-phased RF carpet can achieve ion levitation and controlled lateral motion in a denser environment than is typical for RF ion transport in gases. This feature makes such carpets strong candidates for ion transport to single ion sensors envisaged for future neutrinoless double-beta decay experiments in xenon gas., The work in this paper was funded by the US Department of Energy under DE-SC0019054 and DE-SC0019223 to the University of Texas at Arlington. The NEXT Collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under Grant Agreement No. 951281-BOLD; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under Grant Agreement No. 957202-HIDDEN; the MCIN/AEI of Spain and ERDF A way of making Europe under grants PID2021-125475NB and RTI2018-095979, and the Severo Ochoa and Maria de Maeztu Program grants CEX2023-001292-S, CEX2023-001318-M and CEX2018-000867-S; the Generalitat Valenciana of Spain under grants PROMETEO/2021/087 and CISEJI/2023/27; the Department of Education of the Basque Government of Spain under the predoctoral training program non-doctoral research personnel; the Spanish la Caixa Foundation (ID 100010434) under fellowship code LCF/BQ/PI22/11910019; the Portuguese FCT under project UID/FIS/04559/2020 to fund the activities of LIBPhys-UC; the Israel Science Foundation (ISF) under grant 1223/21; the Pazy Foundation (Israel) under grants 310/22, 315/19 and 465; the US Department of Energy under contracts number DE-AC02-06CH11357 (Argonne National Laboratory), DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M), DE-SC0019054 (Texas Arlington) and DE-SC0019223 (Texas Arlington); the US National Science Foundation under award number NSF CHE 2004111; the Robert A Welch Foundation under award number Y-2031-20200401; Deutsche Forschungsgemeinschaft (DFG, German Research Foundation)-AY 155/2-1; MB acknowledge support from the National Science Foundation under grant number PHY-2310059. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental methodology for turbocompressor in-duct noise evaluation based on beamforming wave decomposition

  • Torregrosa, A. J.|||0000-0003-0933-1626
  • Broatch, A.|||0000-0001-9991-1039
  • Margot , Xandra|||0000-0002-2639-0444
  • García-Tíscar, Jorge|||0000-0003-4934-4587
An experimental methodology is proposed to assess the noise emission of centrifugal turbocompressors like those of automotive turbochargers. A step-by-step procedure is detailed, starting from the theoretical considerations of sound measurement in flow ducts and examining specific experimental setup guidelines and signal processing routines. Special care is taken regarding some limiting factors that adversely affect the measuring of sound intensity in ducts, namely calibration, sensor placement and frequency ranges and restrictions. In order to provide illustrative examples of the proposed techniques and results, the methodology has been applied to the acoustic evaluation of a small automotive turbocharger in a flow bench. Samples of raw pressure spectra, decomposed pressure waves, calibration results, accurate surge characterization and final compressor noise maps and estimated spectrograms are provided. The analysis of selected frequency bands successfully shows how different, known noise phenomena of particular interest such as mid-frequency "whoosh noise" and low-frequency surge onset are correlated with operating conditions of the turbocharger. Comparison against external inlet orifice intensity measurements shows good correlation and improvement with respect to alternative wave decomposition techniques., The equipment used in this work has been partially supported by the Spanish Ministerio de Economia y Competitividad through grant no. TRA2012-36954 and by FEDER project funds "Dotacion de infraestructuras cientifico-tecnicas para el Centro Integral de Mejora Energetica y Medioambiental de Sistemas de Transporte (CiMeT), (FEDER-ICTS-2012-06)" framed in the operational program of unique scientific and technical infrastructure of the Spanish Ministerio de Economia y Competitividad. J. Garcia-Tiscar is partially supported through contract FPI-S2-2015-1530 of the Programa de Apoyo para la Investigacion y Desarrollo (PAID) of Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Additive-Free Commercial Alumina Catalyzes the Halogen Exchange Reaction of Long Alkyl Halides in Batch and in Flow Processes

  • Mingueza-Verdejo, Paloma
  • Hervàs-Arnandis, Susi
  • Oliver-Meseguer, Judit|||0000-0003-1555-3583
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] The synthesis of alkyl halides can be performed by simply halide exchange reactions between two different alkyl halides, catalyzed by aluminosilicates. Here, we show that commercially available alumina shows a superior catalytic activity for the halogen exchange reaction between long alkyl halides (more than 6 carbons), including fluorides, in either batch or flow modes. The catalytic activity of the solid alumina is modulated by alkaline countercations on the surface, and sodium-supported alumina shows the optimal performance for the iodo-bromo and iodo-fluoro exchange under inflow reaction conditions, after >24 h reaction time, without any external additive., P. M.-V. and S. H.-A. thank ITQ, UPV-CSIC for the concession of a contract (PAID 01-20 and FPI-2022-S2-42040, respectively). J. O.-M. thanks the MICINN for the concession of a Ramon y Cajal contract (RYC2022-036154-I).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Determination of photostability, biocompatibility and efficiency as photo-Fenton auxiliaries of three different types of soluble bio-based substances (SBO)

  • Gomis, Juan
  • Gonçalves, Mayara G.
  • Sabater Marco, Consuelo
  • Prevot, Alessandra Bianco
  • Vercher Aznar, Rosa|||0000-0003-3711-8064
  • Castillo López, María-Ángeles|||0000-0002-8534-8940
  • Amat Payá, Ana María|||0000-0003-4218-2685
  • Arqués Sanz, Antonio|||0000-0001-8692-6979
[EN] The aim of this work is to determine the photostability biocompatibility and efficiency of water soluble bio-based substances (SBO) in photo-oxidative processes for wastewater treatment. Three batches of SBO, isolated from different sources, have been investigated. Differences in the functional groups present in these substances can explain major trends in their physical/chemical properties. Bioassays have proven those materials to be non-toxic but to show poor biodegradability. Their ability to enhance a photo-Fenton process at milder pH (5.2) has been investigated using a mixture of emerging compounds in wastewaters. All the tested SBO were able to remove all pollutants in less than one hour irradiation, and the best results were obtained with those substances showing higher hydrophilic/hydrophobic ratio. Moreover, although SBOs themselves undergo a slight oxidation, no relevant negative effect has been observed for their use in wastewater treatment., The authors want to thank the financial support of the European Union (PIRSES-GA-2010-269128, EnvironBOS) and Spanish Ministerio de Educacion y Ciencia (CTQ2012-38754-C03-02). Juan Gomis would like to thank UPV for his FPI grant (2010-07).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Estudio comparativo de algoritmos de auto-ajuste de controladores PID. Resultados del Benchmark 2010-2011 del Grupo de Ingeniería de Control de CEA, Comparative Study of Auto-tuning Algorithms for PID Controllers. Results of the 2010-2011 Match of the Control Engineering Group of CEA

  • Romero Pérez, J.A.
  • Arrieta, O.
  • Padula, F.
  • Reynoso Meza, Gilberto
  • Balaguer, P.
  • Garcia-Nieto, Sergio|||0000-0002-2722-742X
[EN] In this paper three PID auto-tuning algorithms which are mainly focused on the disturbance rejection problem are compared. The algorithms differ in both the experiments carried out to obtain information of the process dynamic and the methods for calculating the controller parameters. The algorithms were presented in the 2010-2011 Match of the Control Engineering Group of CEA. The comparison is based on an evaluation methodology that takes into account the experimental phase as well as the closed loop performance during the control phase., [ES] En este artículo se comparan tres métodos de auto-ajuste de controladores PID que consideran diferentes tipos de experimentos para obtener información de la dinámica del proceso y distintos métodos de cálculo de los parámetros del controlador para minimizar el efecto de las perturbaciones. Los métodos fueron presentados en el concurso anual organizado por el grupo de Ingeniería de Control de CEA-IFAC del curso 2010-2011. Para la comparación se aplica la metodología de evaluación de algoritmos de autoajuste que tiene en cuenta tanto la fase de experimento como las prestaciones que se consiguen en la fase de control., Este trabajo ha sido parcialmente financiado por el Gobierno Español mediante los proyectos con referencia DPI2008-02133 y DPI2010-15230, la Fundación Caixa Castellón-Bancaixa y la Universitat Jaume I a través de proyecto con referencia P1-1A2010-16, la Universidad Politécnica de Valencia mediante el programa de becas FPI-2010/19. Además, es muy apreciado el apoyo de la Universidad de Costa Rica, el MICIT, y el CONICIT del Gobierno de la República de Costa Rica.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Corrosion resistance of ultra-high performance fibre- reinforced concrete

  • Valcuende Payá, Manuel Octavio|||0000-0002-9967-1554
  • Lliso-Ferrando, Josep Ramon|||0000-0002-2457-9024
  • Ramón Zamora, José Enrique
  • Soto Camino, Juan
[EN] The corrosion resistance of ultra-high performance concrete (UH) made with different fibre contents and under distinct curing conditions was studied. No signs of carbonation were observed after 1 year of accelerated carbonation testing (3% CO2). The fibreless UHs¿ electrical resistivity was above 5000 ¿·m, although these values were 2-fold higher than a UH with 1% fibres and approximately 5-fold higher than a UH with 2% fibres. Concrete resistance to chloride penetration was also extremely high (the diffusion coefficient equalled 1.3·10¿13 m2/s) and curing temperatures of 60 °C or 90 °C improved even more these properties, while lack of curing made them slightly worse. Given these excellent properties, the corrosion rate in specimens submerged in chloride solution for 1 year was negligible (iCORR from 0.007 to 0.025 µA/cm2). These values remained stable with time, unlike the 50 MPa concrete at 2 months when iCORR starting to increase and was 12-fold higher after 1 year. The time estimated for corrosion onset in UH is on average about 150-fold higher than that of 50 MPa., Authors thank to the Spanish Government the financial support of project BIA2016-78460-C3-3-R and to the European Union¿s Horizon 2020 the financial support of ReSHEALience project (Grant Agreement No. 760824). Furthermore, authors would like to express their gratitude for the support of the Universitat Politecnica de Valencia. Funding for open access charge: CRUE-Universitat Politecnica de Valencia. The predoctoral scholarship granted to Josep Ramon Lliso Ferrando within the program "Formacion de Personal Investigador" from the Universitat Politecnica de Valencia (FPI-UPV-2018) is also gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluación de medidas de seguridad en el suministro de agua de riego. El caso de la comunidad de regantes Genil-Cabra, Assessment of irrigation water security measures: The case of the Genil-Cabra Irrigation Community

  • Alcon, Francisco
  • Martínez-Garcia, Víctor
  • García-Vila, Margarita
  • Martínez-Paz, José Miguel
  • Fereres, Elías
  • López-Becerra, Erasmo Isidro
[ES] El éxito de la adopción de medidas encaminadas a mejorar la garantía del suministro de agua de riego, tanto desde el punto de vista de la oferta como de la demanda, depende de su aceptación por los regantes, siendo la evaluación previa a su implementación de gran utilidad para la toma de decisiones. En este contexto, el objetivo de este trabajo es valorar los efectos de una de las medidas más utilizadas en la gestión de la oferta como es el aumento de la capacidad de almacenamiento y regulación, sobre el beneficio de los regantes. También se identifican aquellas características de los agricultores y las explotaciones que influyen en la heterogeneidad de las preferencias, y su efecto sobre la evolución temporal de la valoración. Para ello se ha utilizado la metodología de valoración contingente en la comunidad de regantes del Genil-Cabra (Córdoba, España) Los resultados indican que los agricultores están dispuestos a pagar en media 23 €/ha y año para asegurar el suministro de agua, cifra que no cubriría los costes de la medida (38 €/ha y año). La renta anual neta y la superficie de cada tipo de cultivo, condicionada a la posibilidad de ser cultivado en secano, influyen sobre la preferencia individual de los regantes. Estos resultados, junto con la distribución espacial de las valoraciones individuales realizadas, ayudarán a los encargados de la gestión de la comunidad de regantes y el organismo de cuenca a tomar decisiones informadas sobre la adopción de medidas que permitan asegurar el suministro en el agua de riego., [EN] Adoption success of measures aimed at improving irrigation water supply reliability, both from the supply and demand side, depends on their acceptance by irrigators, being the evaluation prior to their implementation very useful for decision-making. In this context, this work aims to assess the effects of one of the most widely used measures in supply management, such as the increase in storage and regulation capacity, on the irrigators' profits. It also aims to identify the farmers and farms characteristics that influence the heterogeneity of preferences, and their effect on the temporal evolution of valuation. For these purposes, the contingent valuation methodology has been used in the Genil-Cabra irrigation community (Cordoba, Spain). Results show that farmers are willing to pay on average 23 (sic)/ha year to secure water supply, which would not cover the costs of the measure for increasing storage (38 (sic)/ha year). The net annual income and the area of each type of crop, conditional on the possibility of being grown rainfed, influenced the individual preference of irrigators. These results, together with the spatial distribution of the individual assessments made, should help the irrigation community management and the Water Authority to make informed decisions on measures to secure irrigation water supply., Este trabajo ha sido realizado bajo el Proyecto SIRRIMED (FP7-FOOD-CT-2009-245159), financiado por la Comisión Europea, y el Proyecto 20912/PI/18 de la Fundación SénecaAgencia de Ciencia y Tecnología de la Región de Murcia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Intercomparison of full energy peak efficiency curves for an HPGe detector using MCNP6 and GEANT4

  • Ordóñez-Ródenas, José|||0000-0001-8150-4873
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • Sáez-Muñoz, Marina|||0000-0003-0180-7167
  • Martorell Alsina, Sebastián Salvador|||0000-0003-1706-4740
  • Ortiz Moragón, Josefina
[EN] This work is focused on studying the capabilities of different Monte Carlo tools to complement the Full Energy Peak Efficiency (FEPE) calibration procedures of the Environmental Radioactivity Laboratory of the Universitat Politècnica de València, UPV. In this frame, detailed models of a High Purity Germanium detector have been implemented using MCNP6 and GEANT4. Accordingly, an inter-comparison with experimental values ensures the model validation and improves the analysis of the physics phenomena involved. The validation of the models is determined by a quantitative comparison between the simulated and the measured efficiencies over the energy range under study (59.54¿1836.01 keV). The results show discrepancies between both Monte Carlo tools for 139Ce, 88Y and 60Co as GEANT4 is able to simulate the coincidence summing effect of these radionuclides., The authors gratefully acknowledge the Catedra CSN-UPV Vicente Serradell, Spain as well as the Laboratorio de Radiactividad Ambiental (Universitat Politecnica de Valencia), Spain for the dedicated funding and resources to this research work under Grant no. FPI-2015-S2-1576.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

First results of the NEXT-100 detector using 83mKr decays

  • Martinez-Lema, G.
  • Herves Carrete, C.
  • Torelli, S.
  • Cid Laso, M.
  • Vazquez Cabaleiro, P.
  • Palmeiro, B.
  • Hernando Morata, J. A.
  • Gomez-Cadenas, J. J.
  • Adams, C.
  • Almazan, H.
  • Aranburu, A. I.
  • Arazi, L.
  • Arnquist, I. J.
  • Auria-Luna, F.
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • García-Barrena, Jara
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • MARTÍNEZ PÉREZ, ALBERTO
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] The NEXT Collaboration is investigating the double beta decay of ¹³¿Xe using high-pressure gaseous electroluminescent time projection chambers, which provide excellent energy resolution together with a robust topological signature. Operating at the Laboratorio Subterráneo de Canfranc (LSC) and building on the success of the NEXT-White detector, the NEXT-100 apparatus began commissioning in May 2024 and started operation with xenon at a pressure of 4 bar in October 2024. We report here the first results obtained with NEXT-100 using low-energy calibration data from ¿³¿Kr decays, which allow the detector response to be mapped throughout the active volume and its stability to be monitored over time. After homogenizing the light response, we achieve an energy resolution of 4.37% FWHM at 41.5 keV for ¿³¿Kr point-like energy deposits contained within a radius of 425 mm. In a fiducial region representing the operating conditions of NEXT-100 at 10 bar, we obtain an improved energy resolution of 4.16% FWHM. These results are in good agreement with those obtained in NEXT-White, and an E¿¹¿² extrapolation to Q<sub>ßß</sub> yields an energy resolution close to 0.5% FWHM, well below the 1% FWHM design target., The NEXT Collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under Grant Agreements No. 951281-BOLD and 101039048-GanESS; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under Grant Agreement No. 860881-HIDDeN; the MCIN/AEI of Spain and ERDF A way of making Europe under grants PID2021-125475NB and RTI2018-095979, and the Severo Ochoa and Maria de Maeztu Program grants CEX2023-001292-S, CEX2023-001318-M and CEX2018-000867-S; the Generalitat Valenciana of Spain under grants PROMETEO/2021/087, ASFAE/2022/028, ASFAE/2022/029, CISEJI/2023/27 and CIDEXG/2023/16; the Department of Education of the Basque Government of Spain under the predoctoral training program non-doctoral research personnel; the Spanish la Caixa Foundation (ID 100010434) under fellowship code LCF/BQ/PI22/11910019; the Portuguese FCT under project UID/FIS/04559/2020 to fund the activities of LIBPhys-UC; the Israel Science Foundation (ISF) under grant 1223/21; the Pazy Foundation (Israel) under grants 310/22, 315/19 and 465; the US Department of Energy under contract numbers DE-AC02-06CH11357 (Argonne National Laboratory), DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M), DE-SC0019054 (Texas Arlington) and DE-SC0019223 (Texas Arlington); the US National Science Foundation under award number NSF CHE 2004111; the Robert A. Welch Foundation under award number Y-2031-20200401. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of material structure on air-borne ultrasonic application in drying

  • Ozuna López, César
  • Gomez Alvarez-Arenas, Tomas
  • Riera, Enrique
  • Carcel, J. A.|||0000-0002-3796-6146
  • Garcia-Perez, J.V.|||0000-0002-9993-4246
[EN] This work aims to contribute to the understanding of how the properties of the material being dried affect air-borne ultrasonic application. To this end, the experimental drying kinetics (40 C and 1 m/s) of cassava (Manihot esculenta) and apple (Malus domestica var. Granny Smith) were carried out applying different ultrasonic powers (0, 6, 12, 19, 25 and 31 kW/m3). Furthermore, the power ultrasound-assisted drying kinetics of different fruits and vegetables (potato, eggplant, carrot, orange and lemon peel) already reported in previous studies were also analyzed. The structural, textural and acoustic properties of all these products were assessed, and the drying kinetics modeled by means of the diffusion theory. A significant linear correlation (r > 0.95) was established between the identified effective diffusivity (DW) and the applied ultrasonic power for the different products. The slope of this relationship (SDUP) was used as an index of the effectiveness of the ultrasonic application; thus the higher the SDUP, the more effective the ultrasound application. SDUP was well correlated (rP0.95) with the porosity and hardness. In addition, SDUP was largely affected by the acoustic impedance of the material being dried, showing a similar pattern with the impedance than the transmission coefficient of the acoustic energy on the interface. Thus, soft and open-porous product structures exhibited a better transmission of acoustic energy and were more prone to the mechanical effects of ultrasound. However, materials with a hard and closed-compact structure were less affected by acoustic energy due to the fact that the significant impedance differences between the product and the air cause high energy losses on the interface, The authors acknowledge the financial support of the Spanish Ministerio de Economia y Competitividad (Ref. DPI2012-37466-C03-03, DPI2012-37466-C03-03 and DPI2011-22438) and the assistance with the microstructural analysis provided by Dra. Ana Puig from Departamento de Tecnologia de Alimentos of Universitat Politecnica de Valencia (UPV). The author Cesar Ozuna thanks UPV for an FPI Grant (Ref. 2009-02).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analyzing the Performance of Software Defined Networks vs Real Networks

  • Jimenez, Jose M.|||0000-0002-3688-7235
  • Romero Martínez, José Oscar|||0000-0003-4081-9005
  • Lloret, Jaime|||0000-0002-0862-0533
  • Rego Máñez, Albert
[EN] Emulators and simulators provide an easy way to reduce hardware needs in experiments. Because of that, network researchers use applications that allow them to emulate or simulate networks, like Mininet in Software Defined Networks. It is desired to obtain very close results between the ones given in a virtual network and the ones obtained when the real network hardware is implemented in order to avoid using too much hardware in complex experiments without gathering unreal results. In this paper, we compare the experimental results obtained when a virtual network is generated by using Mininet versus a real implemented network. We have compared them varying the Maximum Transmission Unit (MTU) on Internet Protocol version 4 (IPv4) packets. Ethernet, Fiber Distributed Data Interface (FDDI), and Wireless Local Area Network 802.11 (WLAN 802.11) MTUs have been used in our experimental tests. We have worked with different link capabilities and generated traffic with different bandwidth., This work has been supported by the “Ministerio de Economía y Competitividad”, through the “Convocatoria 2014. Proyectos I+D - Programa Estatal de Investigación Científica y Técnica de Excelencia” in the “Subprograma Estatal de Generación de Conocimiento”, Project TIN2014- 57991-C3-1-P and the “Programa para la Formación de Personal Investigador – (FPI-2015-S2-884)” by the “Universitat Politècnica de València”.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

ECN Spray G External Spray Visualization and Spray Collapse Description through Penetration and Morphology Analysis

  • Payri, Raul|||0000-0001-7428-5510
  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Marti-Aldaravi, Pedro|||0000-0003-4650-4004
  • Vaquerizo, Daniel
[EN] Inside a DISI engine, a wide range of pressure and temperature conditions are possible, and with the current evolution of the systems, many of the conditions are subject to be encountered at the moment of injection. Given the great differences between Diesel injectors and GDi fuel injectors, the effects of such conditions on the development of the fuel injected can cause phenomena like flash boiling and spray collapse that fundamentally change the behavior of sprays. In this work, the Spray G injector developed by Delphi for the Engine Combustion Network (ECN) group has been tested in a High Pressure High Temperature Constant Pressure Flow Rig (HPHT - CPFR) in a wide range of experimental conditions capturing the liquid and vapor phases of the spray by means of DBI and Schlieren imaging. The work presents the results obtained by spray visualization through comparisons of parametric variations with special focus on the collapse of the spray that occurs under high ambient temperature and density conditions. Spray collapse has been described by showing the direct increase that can cause in spray penetration and the great closing effect that can produce to the aperture of the spray (spray angle). Several contour comparisons using the raw images and the detected contours have been discussed in order to support and further explain the observed trends. (C) 2016 Elsevier Ltd. All rights reserved., This work was sponsored by "Ministerio de Economia y Competitividad" in the frame of the project "Estudio de la interaccion chorro-pared en condiciones realistas de motor (SPRAY WALL)" reference TRA2015-67679-C2-1-R. Daniel Vaquerizo is partially supported through contract FPI-S2-2015-1069 of "Programa de Apoyo para la Investigacion y Desarrollo (PAID)" of Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ozonation of hospital raw wastewaters for cytostatic compounds removal. Kinetic modelling and economic assessment of the process

  • Ferre Aracil, Jesús
  • Valcárcel, Yolanda
  • Negreira, N.
  • López de Alda, Miren
  • Barceló, D.
  • Cardona, S. C.
  • Navarro-Laboulais, J.|||0000-0001-6347-5407
[EN] The kinetics of the ozone consumption for the pretreatment of hospital wastewater has been analysed in order to determine the reaction rate coefficients between the ozone and the readily oxidisabled organic matter and cytostatic compounds. The wastewater from a medium size hospital was treated with ozone and peroxone methodologies, varying the ozone concentration, the reaction time and the hydrogen peroxide doses. The analysis shows that there are four cytostatic compounds, i.e. irinotecan, ifosfamide, cyclophosphamide and capecitabine, detected in the wastewaters and they are completely removed with reasonably short times after the ozone treatment. Considering the reactor geometry, the gas hydrodynamics, the mass transfer of ozone from gas to liquid and the reaction of all oxidisable compounds of the wastewater it is possible to determine the chemical ozone demand, COzD, of the sample as 256 mg O-3 L-1 and the kinetic rate coefficient with the dissolved organic matter as 8.4 M (1) s(-1). The kinetic rate coefficient between the ozone and the cyclophosphamide is in the order of 34.7M(-1) s(-1) and higher for the other cytostatics. The direct economic cost of the treatment was evaluated considering this reaction kinetics and it is below 0.3 (sic)/m(3) under given circumstances. (C) 2016 Elsevier B.V. All rights reserved., J. Ferre-Aracil acknowledges the support of the doctoral fellowship from the Universitat Politecnica de Valencia (UPV-PAID-FPI-2010-04). Y. Valcarcel acknowledges the financial support provided by the Spanish Ministry for Economy and Competitiveness, through the Carlos III Health Institute with the program "Projects on Health Research 2011-2012 FIS (PI11/00180)". N. Negreira, M. Lopez de Alda and D. Barcelo acknowledge the financial support by the EU through the EU FP7 projects CytoThreat (265264) and SOLUTIONS (603437), by the Spanish Ministry of Economy and Competitiveness through the project SCARCE (Consolider-Ingenio 2010 CSD2009-00065), and by the Generalitat de Catalunya (Consolidated Research Groups "2014 SGR 418 - Water and Soil Quality Unit" and 2014 SGR 291 - ICRA). Merck is acknowledged for the gift of LC columns.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Maximizing resource usage in multifold molecular dynamics with rCUDA

  • Prades, Javier|||0000-0003-3349-2200
  • Silla, Federico|||0000-0002-6435-1200
  • Imbernon, Baldomero
  • Reaño González, Carlos
  • Peña-García, Jorge
  • Cerón-Carrasco, Jose Pedro
  • Pérez-Sánchez, Horacio
[EN] The full-understanding of the dynamics of molecular systems at the atomic scale is of great relevance in the fields of chemistry, physics, materials science, and drug discovery just to name a few. Molecular dynamics (MD) is a widely used computer tool for simulating the dynamical behavior of molecules. However, the computational horsepower required by MD simulations is too high to obtain conclusive results in real-world scenarios. This is mainly motivated by two factors: (1) the long execution time required by each MD simulation (usually in the nanoseconds and microseconds scale, and beyond) and (2) the large number of simulations required in drug discovery to study the interactions between a large library of compounds and a given protein target. To deal with the former, graphics processing units (GPUs) have come up into the scene. The latter has been traditionally approached by launching large amounts of simulations in computing clusters that may contain several GPUs on each node. However, GPUs are targeted as a single node that only runs one MD instance at a time, which translates into low GPU occupancy ratios and therefore low throughput. In this work, we propose a strategy to increase the overall throughput of MD simulations by increasing the GPU occupancy through virtualized GPUs. We use the remote CUDA (rCUDA) middleware as a tool to decouple GPUs from CPUs, and thus enabling multi-tenancy of the virtual GPUs. As a working test in the drug discovery field, we studied the binding process of a novel flavonol to DNA with the GROningen MAchine for Chemical Simulations (GROMACS) MD package. Our results show that the use of rCUDA provides with a 1.21x speed-up factor compared to the CUDA counterpart version while requiring a similar power budget., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This work was jointly supported by the Fundación Séneca (Agencia Regional de Ciencia y Tecnología, Región de Murcia) under grants (20524/PDC/18, 20813/PI/ 18, and 20988/PI/18) and by the Spanish MEC and Eur-opean Commission FEDER under grants TIN2015-66972-C5-3-R, TIN2016-78799-P, and CTQ2017-87974-R (AEI/FEDER, UE). Researchers from the Universitat Politècnica de València are supported by the Generalitat Valenciana under grant PROMETEO/2017/077.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modeling and Experimental Validation of a Volumetric Expander Suitable for Waste Heat Recovery from an Automotive Internal Combustion Engine Using an Organic Rankine Cycle with Ethanol

  • Galindo, José|||0000-0001-6068-182X
  • Dolz, Vicente|||0000-0003-1511-6957
  • Royo-Pascual, Lucía
  • Haller, R.
  • Melis, J.
Waste heat recovery (WHR) in exhaust gas flow of automotive engines has proved to be a useful path to increase the overall efficiency of internal combustion engines (ICE). Recovery potentials of up to 7% are shown in several works in the literature. However, most of them are theoretical estimations. Some present results from prototypes fed by steady flows generated in an auxiliary gas tank and not with actual engine exhaust gases. This paper deals with the modeling and experimental validation of an organic Rankine cycle (ORC) with a swash-plate expander integrated in a 2 L turbocharged petrol engine using ethanol as working fluid. A global simulation model of the ORC was developed with a maximum difference of 5%, validated with experimental results. Considering the swash-plate as the main limiting factor, an additional specific submodel was implemented to model the physical phenomena in this element. This model allows simulating the fluid dynamic behavior of the swash-plate expander using a 0D model (Amesim). Differences up to 10.5% between tests and model results were found., This work is part of a research project called "Evaluation of bottoming cycles in ICEs to recover waste heat energies" funded by a National Project of the Spanish Government with reference TRA2013-46408-R. The authors thank also to Raul Lujan and Rafael Carrascosa for their contribution in the testing process. Authors want to acknowledge the "Apoyo para la investigacion y Desarrollo (PAID)" grant for doctoral studies (FPI S2 2015 1067).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An assessment of the dual-mode reactivity controlled compression ignition/conventional diesel combustion capabilities in a EURO VI medium-duty diesel engine fueled with an intermediate ethanol-gasoline blend and biodiesel

  • Benajes, Jesús|||0000-0002-1653-9188
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • García Martínez, Antonio
  • Balloul, Iyad
  • Pradel, Gerard
This work investigates the capabilities of the dual-mode reactivity controlled compression ignition/conventional diesel combustion engine operation to cover the full operating range of a EURO VI medium-duty diesel engine with compression ratio of 17.5:1. This concept is based on covering all the engine map switching between the reactivity controlled compression ignition and the conventional diesel, combustion operating modes. Specifically, the benefits of reactivity controlled compression ignition combustion are exploited whenever possible according to certain restrictions, while the conventional diesel combustion operation is used to cover the zones of the engine map in which the reactivity controlled compression ignition operation is limited. The experiments were conducted using a single-cylinder research diesel engine derived from the multi-cylinder production engine. In addition, considering the mandatory presence of biofuels in the future context of road transport and the ability of ethanol to be blended with gasoline, the low reactivity fuel used in the study is a blend of 20% ethanol by volume with 80% of 95 octane number gasoline. Moreover, a diesel containing 7% of biodiesel has been used as high reactivity fuel. Firstly, a reactivity controlled compression ignition mapping is performed to check the operational limits of the concept in this engine platform. Later, based on the results, the potential of the dual-mode concept is discussed. Results suggest that, under the constraints imposed, reactivity controlled compression ignition combustion can be utilized between 25% and 35% load. In this region of the map, reactivity controlled compression ignition can provide up to 2% increased gross indicated efficiency than conventional diesel combustion, but led to lower efficiency at low engine speeds. In addition, it was demonstrated that the regeneration periods of the diesel particulate filter during dual-mode operation can be reduced more than twice, which entails a great reduction of the diesel fuel amount injected in the exhaust line., The authors acknowledge VOLVO Group Trucks Technology for supporting this research. The author J. Monsalve-Serrano thanks the Universitat Politecnica de Valencia for his predoctoral contract (FPI-S2-2015-1531), which is included within the framework of Programa de Apoyo para la Investigacitin y Desarrollo (PAID). Additionally, the authors also wish to thank Gabriel Alcantarilla from CMT - Motores Termicos for his technical work in adapting the test cell.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Subnanokelvin thermometry of an interacting d-dimensional homogeneous Bose gas

  • Miskeen Khan, Muhammad
  • Mehboudi, Mohammad
  • Terças, Hugo
  • Lewenstein, Maciej
  • Garcia March, Miguel Angel|||0000-0001-7092-838X
[EN] We propose experimentally feasible means for nondestructive thermometry of homogeneous Bose-Einstein condensates in different spatial dimensions (d is an element of {1 , 2, 3}). Our impurity-based protocol suggests that the fundamental error bound on thermometry at the subnanokelvin domain depends highly on the dimension, in that the higher the dimension the better the precision. Furthermore, suboptimal thermometry of the condensates by using measurements that are experimentally feasible is explored. We specifically focus on measuring position and momentum of the impurity that belong to the family of Gaussian measurements. We show that, generally, experimentally feasible measurements are far from optimal, except in one dimension, where position measurements are indeed optimal. This makes realistic experiments perform very well at few nanokelvin temperatures for all dimensions, and at subnanokelvin temperatures in the one-dimensional scenario. These results take a significant step towards experimental realization of probe-based quantum thermometry of Bose-Einstein condensates, as it deals with them in one, two, and three dimensions and uses feasible measurements applicable in current experimental setups., M.M.K. acknowledges support from Fundacao para a Ciencia e a Tecnologia (FCT-Portugal) through Grant No. PD/BD/114335/2016. H.T. acknowledges Fundacao para a Ciencia e a Tecnologia (FCT Portugal) through Con-tract No CEECIND/00401/2018, and the financial support through the Quantum Flagship Grant PhoQus (Grant No. 820392) of the European Union. M.A.G.M. acknowledges funding from the Spanish Ministry of Education and Vocational Training (MEFP) through the Beatriz Galindo program 2018 (BEAGAL18/00203) . ICFO group acknowl-edges support from: ERC AdG NOQIA; Agencia Estatal de Investigacion (R&D project CEX2019-000910-S, funded by MCIN/AEI/10.13039/501100011033, Plan Na-tional FIDEUA PID2019-106901GB-I00, FPI, QUANTERA MAQS PCI2019-111828-2, Proyectos de I+D+I ?Retos Co-laboraci?n? QUSPIN RTC2019-007196-7) ; Fundacio Cellex; Fundacio Mir-Puig; Generalitat de Catalunya through the European Social Fund FEDER and CERCA program (AGAUR Grant No. 2017 SGR 134, QuantumCAT \ U16-011424, co-funded by ERDF Operational Program of Catalonia 2014-2020) ; EU Horizon 2020 FET-OPEN OPTOlogic (Grant No 899794) ; National Science Centre, Poland (Symfonia Grant No. 2016/20/W/ST4/00314) ; European Union?s Horizon 2020 research and innova-tion programme under the Marie-Sk?odowska-Curie Grant Agreement No. 101029393 (STREDCH) and No. 847648 (?La Caixa? Junior Leaders fellowships ID100010434: LCF/BQ/PI19/11690013, LCF/BQ/PI20/11760031, LCF/BQ/PR20/11770012, LCF/BQ/PR21/11840013) . M.M. acknowl-edges financial support from the Swiss National Science Foundation (NCCR SwissMAP) . M.M.K. acknowledges Rey group at JILA for the hospitality and for providing the work-ing conditions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Antioxidant edible films based on chitosan and starch containing polyphenols from thyme extracts

  • Talón Argente, Emmanuelle
  • Trifkovic, Kata T.
  • Nedovic, Viktor A.
  • Bugarski, Branko M.
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
  • González Martínez, María Consuelo|||0000-0001-9993-8303
[EN] The aim of this study was to analyse the antioxidant activity of different polymeric matrices based on chitosan and starch, incorporating a thyme extract (TE) rich in polyphenols. TE provided the films with remarkable antioxidant activity. When mixed with chitosan, the polyphenols interacted with the polymer chains, acting as crosslinkers and enhancing the tensile behaviour of films. The opposite effect was observed when incorporated into the starch matrix. All the films became darker, more reddish and less transparent when TE was incorporated. These colour changes were more marked in starch matrices, which suggests that TE compounds were poorly encapsulated. The use of chitosan-based matrices carrying TE polyphenols is recommended as a means of obtaining antioxidant films, on the basis of their tensile response and greater antioxidant activity, which could be associated with the development of polyphenol-chitosan interactions, contributing to a better protection of the functionality of polyphenols during film formation and conditioning., The authors acknowledge the financial support provided by the Spanish Ministerio de Ciencia e Innovación (Project AGL2010-20694). Author E. Talon thanks Universitat Politecnica Valencia (UPV) for a FPI Grant (99/2011). The authors also thanks Oscar Gil and Amparo Ribes from Institute of Materials Technology (UPV) for the support and assistance in the use of the infrared spectrometer.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of a Variable Valve Actuation Control to Improve Diesel Oxidation Catalyst Efficiency and Emissions in a Light Duty Diesel Engine

  • Serrano, J.R.|||0000-0003-0692-3917
  • Arnau Martínez, Francisco José|||0000-0003-2902-0630
  • Martín, Jaime|||0000-0002-0496-3176
  • Auñón-García, Ángel
[EN] Growing interest has arisen to adopt Variable Valve Timing (VVT) technology for automotive engines due to the need to fulfill the pollutant emission regulations. Several VVT strategies, such as the exhaust re-opening and the late exhaust closing, can be used to achieve an increment in the after-treatment upstream temperature by increasing the residual gas amount. In this study, a one-dimensional gas dynamics engine model has been used to simulate several VVT strategies and develop a control system to actuate over the valves timing in order to increase diesel oxidation catalyst efficiency and reduce the exhaust pollutant emissions. A transient operating conditions comparison, taking the Worldwide Harmonized Light-Duty Vehicles Test Cycle (WLTC) as a reference, has been done by analyzing fuel economy, HC and CO pollutant emissions levels. The results conclude that the combination of an early exhaust and a late intake valve events leads to a 20% reduction in CO emissions with a fuel penalty of 6% over the low speed stage of the WLTC, during the warm-up of the oxidation catalyst. The same set-up is able to reduce HC emissions down to 16% and NO(x)emission by 13%., This research has been partially funded by the Spanish government under the grant agreement TRA2017-89894-R ("Mecoem"). Angel Aunon was supported through the "Apoyo para la investigacion y Desarrollo (PAID)" grant for doctoral studies (FPI S2 2018 1048) by Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of Combined Demand-Response and Wind Power Plant Participation in Frequency Control for Multi-Area Power Systems

  • Muñoz-Benavente, Irene
  • Hansen, Anca D.
  • Gómez-Lázaro, Emilio
  • Fernández-Guillamón, Ana
  • Molina-García, Ángel
  • García-Sánchez, Tania María|||0000-0001-5762-5325
[EN] An alternative approach for combined frequency control in multi-area power systems with significant wind power plant integration is described and discussed in detail. Demand response is considered as a decentralized and distributed resource by incorporating innovative frequency-sensitive load controllers into certain thermostatically controlled loads. Wind power plants comprising variable speed wind turbines include an auxiliary frequency control loop contributing to increase total system inertia in a combined manner, which further improves the system frequency performance. Results for interconnected power systems show how the proposed control strategy substantially improves frequency stability and decreases peak frequency excursion (nadir) values. The total need for frequency regulation reserves is reduced as well. Moreover, the requirements to exchange power in multi-area scenarios are significantly decreased. Extensive simulations under power imbalance conditions for interconnected power systems are also presented in the paper., This work was partially supported by by the Regional Seneca Foundation of Spain through the research projects 08747/PI/08 and 19379/PI/14. This work was also supported by project AIM, Ref. TEC2016-76465-C2-1-R (AEI/FEDER, UE). This work was financially supported by the Regional Seneca Foundation of Spain through the research projects 08747/PI/08 and 19379/PI/14.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of spray/wall impingement using an ECN single-hole injector and a controlled-temperature wall under realistic engine conditions

  • Peraza, Jesús E
  • Payri, Raul|||0000-0001-7428-5510
  • Gimeno, Jaime|||0000-0003-3317-9994
  • Carvallo-García, César Leonardo|||0000-0003-2297-2225
[EN] Spray¿wall interactions (SWI) directly affect fuel¿air mixture and emissions formation. Therefore, they are considered among the most critical physical processes in engine research nowadays. However, the physics of the wall film formation, propagation, and breakup is not fully understood yet. This work aims to use a thermoregulated steel wall to study the spray¿wall interaction phenomenon and its influence on the macroscopic spray behavior. A single-hole injector known as ``Spray D¿¿ in the Engine Combustion Network was used. n-Dodecane was employed as fuel and the wall has been positioned in four different configurations, varying angle and distance respect to the injector tip. For this work, not only diesel combustion is reproduced in the test rig due to ambient gas engine-like thermodynamic conditions, but wall temperature has been controlled to emulate characteristic values that could be found in the piston of an internal combustion engine. This implies that the spray¿wall heat transfer is simulated and its effects on ignition and spray development can be analyzed. Heat flux was measured by employing high-speed thermocouples fitted in the wall and by the use of an one-dimensional transient wall heat model. Three high speed cameras were simultaneously used to observe the SWI, one for the Schlieren optical technique which allows to study the vapor phase of the spray and to determine the ignition delay, another one to observe the natural luminosity of the flame, and finally, an intensified camera was used to determine the lift-off length by observing the chemiluminescence of the OH*. An interesting finding obtained in this work was a boundary layer formation due to the thermal diffusion that contributes to cool down the spray and to delay the high-temperature chemical reactions. Results show a substantial increment of the heat flux and the wall temperature variation with both ambient temperature and density by increasing the flame temperature and gas entrainment. The exposure to the cold wall affects the ignition delay variation with the injection pressure and the wall distance. It was found that the wall temperature (in the range of tested conditions) did not affect the lift-off length location, Authors would like to acknowledge Caterpillar Inc. for its support and interest in this work. The author C. Carvallo thanks the Universitat Politecnica de Valencia for his predoctoral contract (FPI-2019-S1) which is included within the framework of Programa de Apoyo para la Investigacion.. Desarrollo (PAID-01-19). Finally, the collaboration of Omar Huerta Cornejo and Sergi Soro in the laboratory work and the setup of the hardware is greatly thanked.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An Intelligent System for Video Surveillance in IoT Environments

  • REGO MAÑEZ, ALBERT
  • Canovas Solbes, Alejandro|||0000-0002-0422-0161
  • Jimenez, Jose M.|||0000-0002-3688-7235
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] Multimedia traffic has drastically grown in the last few years. In addition, some of the last paradigms proposed, like the Internet of Things (IoT), adds new types of traffic and applications. Software-defined networks (SDNs) improve the capability of network management. Combined with SDN, artificial intelligence (AI) can provide solutions to network problems based on classification and estimation techniques. In this paper, we propose an artificial intelligence system for detecting and correcting errors in multimedia transmission in a surveillance IoT environment connected through a SDN. The architecture, algorithm, and messages of the SDN are detailed. The AI system design is described, and the test-bed and the data set are explained. The AI module consists of two different parts. The first one is a classifying part, which detects the type of traffic that is sent through the network. The second part is an estimator that informs the SDN controller on which kind of action should be executed to guarantee the quality of service and quality of experience. Results show that with the actions performed by the network, like jitter can be reduced up to 70% of average and losses can be reduced from 9.07% to nearly 1.16%. Moreover, the presented AI module is able to detect critical traffic with 77% accuracy, This work was supported in part by the Ministerio de Educacion, Cultura y Deporte, through the Ayudas para contratos predoctorales de Formacion del Profesorado Universitario FPU (Convocatoria 2015) under Grant FPU15/06837, in part by the Programa para la Formacion de Personal Investigador de la Universitat Politecnica de Valencia 2014, Subprograma 2, (Codigo del contrato: 884), and in part by the Ministerio de Economia y Competitividad in the Programa Estatal de Fomento de la Investigacion Cientifica y Tecnica de Excelencia, Subprograma Estatal de Generacion de Conocimiento within the project under Grant TIN2014-57991-C3-1-P and Grant TIN2017-84802-C2-1-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Monte Carlo model of a BEGe detector to support gamma-spectrometry in an emergency response

  • Ordóñez-Ródenas, José|||0000-0001-8150-4873
  • Martorell Alsina, Sebastián Salvador|||0000-0003-1706-4740
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • Ortiz Moragón, Josefina
[EN] One of the problems of measuring high radioactivity in an emergency scenario is the fact that the detector can become saturated or reach a measuring dead time too high to give reliable results, which means repeating the measurement in different conditions with the associated delay in obtaining the results and the laboratory workers' risk of exposure. The counting rate can be controlled by varying the sample-to-detector distance as well as by using different source volumes. A Monte Carlo model of a BEGe detector was developed to analyse the system efficiency response for several measuring configurations (distances and volumes) using the MCNP6 code. The total efficiency curves were obtained for an energy range between 59.5 keV and 1836 keV. The simulations provided an estimation of the admissible gamma-rate for different source volumes (in water matrix) and sample-to-detector distances to avoid detector saturation in given measurement conditions. The results were a compromise between geometry, distance and measuring time for certain emergency situations. Three case studies are provided to show the approach's effectiveness., The authors gratefully acknowledge the Catedra CSN-UPV Vicente Serradell, Spain as well as the Laboratorio de Radiactividad Ambiental (Universitat Politecnica de Valencia), Spain, for the dedicated funding and resources for this research work under Grant No. FPI-2015-S2-1576. The authors are also grateful to the Valencian Agency for Security and Emergency and the Generalitat Valenciana for their support in the "Convenio de colaboracion entre la Agencia Valenciana de Seguridad y Respuesta a las Emergencias y la Universitat Politecnica de Valencia para el Desarrollo del Plan de Vigilancia Radiologica en Emergencias" under Grant No. S7042000, 2018.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dynamic Reconfiguration of a RGBD Sensor Based on QoS and QoC Requirements in Distributed Systems

  • Munera Sánchez, Eduardo
  • Poza-Lujan, Jose-Luis|||0000-0003-2450-9920
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Simó Ten, José Enrique|||0000-0003-4677-7627
  • Blanes Noguera, Francisco|||0000-0002-9234-5377
The inclusion of embedded sensors into a networked system provides useful information for many applications. A Distributed Control System (DCS) is one of the clearest examples where processing and communications are constrained by the client s requirements and the capacity of the system. An embedded sensor with advanced processing and communications capabilities supplies high level information, abstracting from the data acquisition process and objects recognition mechanisms. The implementation of an embedded sensor/actuator as a Smart Resource permits clients to access sensor information through distributed network services. Smart resources can offer sensor services as well as computing, communications and peripheral access by implementing a self-aware based adaptation mechanism which adapts the execution profile to the context. On the other hand, information integrity must be ensured when computing processes are dynamically adapted. Therefore, the processing must be adapted to perform tasks in a certain lapse of time but always ensuring a minimum process quality. In the same way, communications must try to reduce the data traffic without excluding relevant information. The main objective of the paper is to present a dynamic configuration mechanism to adapt the sensor processing and communication to the client s requirements in the DCS. This paper describes an implementation of a smart resource based on a Red, Green, Blue, and Depth (RGBD) sensor in order to test the dynamic configuration mechanism presented., This work has been supported by the Spanish Science and Innovation Ministry MICINN under the CICYT project M2C2: "Codiseno de sistemas de control con criticidad mixta basado en misiones" TIN2014-56158-C4-4-P and the Programme for Research and Development PAID of the Polytechnic University of Valencia: UPV-PAID-FPI-2013. The responsibility for the content remains with the authors.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Potential of exhaust heat recovery for intake charge heating in a Diesel engine transient operation at cold conditions

  • Luján, José M.|||0000-0001-6133-8943
  • Climent, H.|||0000-0002-2407-5651
  • Dolz, Vicente|||0000-0003-1511-6957
  • Moratal Martínez, Ausiás Alberto
  • Borges Alejo, José
  • Soukeur, Zoulikha
In this paper, an experimental facility is implemented with the aim of improving the performance of internal combustion engines working at low ambient temperatures. Pollutant emissions and fuel consumption are one of the major issues that automotive engineers have to face. Cold engine start and warming up analysis have become important topics for researches. In this work, an exhaust heat recovery system for a diesel engine has been proposed as a solution to cold operation negative effects. The energy obtained from the exhaust gases was used to increase the intake air temperature. The experiments were carried out in transient load conditions at three different levels of ambient temperature (up to -7ºC). Exhaust heat recovery was combined with different strategies of exhaust gas recirculation. Intake air heating results with the heat recovery system show a reduction of 65% in unburned hydrocarbons, 40% in carbon monoxide and 10% in fuel use compared to standard air-air intercooler., This research has been partially financed by the Ministerio de Economia y Competitividad of Spain, through project IPT-370000-2010-022 'Investigacion y desarrollo de tecnologias de EGR adaptadas a las nuevas arquitecturas y requerimientos de refrigeracion en motores diesel sobrealimentados para automocion (HIREFIRE)'. The authors gratefully appreciate this support. Authors want to acknowledge the "Apoyo para la investigacion y Desarrollo (PAID)" grant for doctoral studies (FPI S2 2015 1062).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of liquid and vapor phase behavior on Diesel sprays for heavy duty engine nozzles

  • Payri, Raul|||0000-0001-7428-5510
  • Gimeno, Jaime|||0000-0003-3317-9994
  • Bracho Leon, Gabriela|||0000-0002-9198-7044
  • Vaquerizo, Daniel
A lot of effort has been put in the past years into the understanding of the delivery and development of diesel sprays in engine-like conditions as it has been proved to be a very important step for the design of better and cleaner commercial engines. Due to the bigger share of passenger cars engines over heavy duty engines, the research has been mainly focused on the investigation using small nozzles. This paper studies two nozzles with diameters representative of those that can be encountered in heavy duty engines, with the objective of corroborating the conclusions gathered for small nozzles representative of passenger car engines. The experimental data have been acquired by state-of-the-art techniques and equipment, and serves two purposes: further the understanding of the physics involved in the injection event and spray evaporation; and provide a dataset to CFD models that can accurately predict the behavior of the injection event. The tests were performed in a constant pressure flow vessel that allows to simulate engine-like conditions (1000 K and 15 Mpa) with continuous flow. The injection system tested is a novel, common-rail, solenoid-actuated injector for heavy duty applications which operates up to 220 Mpa. All experiments were performed in non-reacting conditions. The extended test matrix allowed to determine the influence of several parameters such as rail pressure, gas temperature, gas density, and nozzle geometry on the air-fuel mixing and evaporation process, by analyzing the spray penetration and spreading angle. Mie scattering and double-pass Schlieren optical configurations have been used to measure global liquid and vapor penetration, respectively. The data proves that spray penetration at low temperature can be up to 15% faster than spray penetration at high temperature conditions at the same density for the nozzles experi-mented, which limits the usability of low temperature experiments to infer the behavior of the injector at high temperature conditions. The data also shows that the nozzle with the biggest diameter provided the highest value of stabilized liquid length as expected. Also, when vapor phase is reached, the temperature has negligible effect on the global diesel spray morphology, and no influence on the tip penetration or on the spreading angle., This work was sponsored by "Ministerio de Economia y Competitividad" in the frame of the project "Estudio de la interaction chorro-pared en condiciones realistas de motor (SPRAY WALL)" reference TRA2015-67679-c2-1-R. Daniel Vaquerizo is partially supported through contract FPI-S2-2015-1069 of Programa de Apoyo para la Investigacion y Desarrollo (PAID) of Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Devaney chaos and distributional chaos in the solution of certain partial differential equations

  • Barrachina Civera, Xavier
  • Conejero, J. Alberto|||0000-0003-3681-7533
The notion of distributional chaos has been recently added to the study of the linear dynamics of operators and C0-semigroups of operators. We will study this notion of chaos for some examples of C0-semigroups that are already known to be Devaney chaotic. © 2012 Xavier Barrachina and J. Alberto Conejero., This work is supported in part by MEC and FEDER, Project MTM2010-14909, by Generalitat Valenciana, Project GV/2010/091, and by Universitat Politecnica de Valencia, Project PAID-06-09-2932. X. Barrachina also wants to acknowledge the support of the Grant FPI-UPV 2009-04 from Programa de Ayudas de Investigacion y Desarrollo de la Universitat Politecnica de Valencia. The authors also thank the referees for helpful comments that improved the presentation of the paper.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Morphology, anatomy and germination response of heteromorphic achenes of Anthemis chrysantha J. Gay (Asteraceae), a critically endangered species

  • Aguado, Mayra
  • Martinez-Sanchez, Juan J.
  • Reig Armiñana, José
  • García Breijo, Francisco José
  • Franco, Jose A.
  • Vicente, Maria J.
[EN] This study demonstrates that Anthemis chrysantha, a 'Critically Endangered' annual plant, produces two morphs of achenes: white and dark achenes, which differ in size, mass, anatomy and germination behaviour. Fresh white achenes germinated at all temperatures assayed from 10 to 25 degrees C in both continuous darkness and 12-h photoperiod, ranging between 24% at 25 degrees C in darkness and 89% at 12/20 degrees C in light, whereas fresh dark achenes did not germinate under any temperature or light conditions. To identify differences in dormancy type between the two morphs, germination of dry-stored achenes, and achenes stratified at 5 or 25 degrees C for 2 months were tested in both darkness and light at 5, 15 and 12/20 degrees C for dry-stored and warm-stratified (25 degrees C) achenes; and at 15, 25 and 12/20 degrees C for cold-stratified (5 degrees C) achenes. Of the white achenes, 90% germinated during the cold stratification period. In general, dry storage and warm stratification did not increase germination compared to fresh achenes. However, dark achenes did not germinate under any conditions. Dark achene dormancy was only broken by mechanical scarification or by excising the embryo (germination reached 71%). An anatomical study showed that the mesocarp of dark achenes had no intercellular spaces and was much thicker and stronger than that of white achenes, making the entry of water difficult, and also preventing germination by mechanical restriction. This study demonstrated that dormancy in the dark achenes is likely caused by the thickness of their pericarp, physically impeding germination and hampering imbibition of water., This work was financed by the Consejeria de Agricultura y Agua de la Comunidad Autonoma de la Region de Murcia and the Fundacion Seneca de la Region de Murcia (Project 1186/PI/09).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Magnetic-Assisted Control of Eggs and Embryos via Zona Pellucida-Linked Nanoparticles

  • García-Vazquez, Francisco Alberto
  • Garrapa, Gabriela
  • Luongo, Chiara
  • Hamze, Julieta Gabriela
  • Caballero, María
  • Molina-Cuberos, Gregorio J.
  • Jiménez-Movilla, María
  • Marco-Jiménez, Francisco|||0000-0002-5226-4118
  • Vicente Antón, José Salvador|||0000-0003-0481-3802
[EN] Eggs and embryo manipulation is an important biotechnological challenge to enable positioning, entrapment, and selection of reproductive cells to advance into a new era of nature-like assisted reproductive technologies. Oviductin (OVGP1) is an abundant protein in the oviduct that binds reversibly to thezona pellucida, an extracellular matrix that surrounds eggs and embryos. Here, the study reports a new method coupling OVGP1 to magnetic nanoparticles (NP) forming a complex (NPOv). NPOv specifically surrounds eggs and embryos in a reversible manner. Eggs/embryos bound to NPOv can be moved or retained when subjected to a magnetic force, and interestingly only mature-competent eggs are attracted. This procedure is compatible with normal development following gametes function, in vitro fertilization, embryo development and resulting in the birth of healthy offspring. The results provide in vitro proof-of-concept that eggs and embryos can be precisely guided in the absence of physical contact by the use of magnets., The authors appreciate the critical reading of the manuscript by Dr. Pablo Bermejo and Dr. Jurrien Dean. Funding was provided by Fundacion Seneca-Agencia de Ciencia y Tecnologia de la Region de Murcia "Ayudas a la realizacion de proyectos para el desarrollo de investigacion cientifica y tecnica por grupos competitivos (20887/PI/18, M.J.M; 22001/PI/22, F.A.G.V.)" and "Fundacion Seneca-Prueba de concepto" (21637/PDC/21, F.A.G.V. and M.J.M.) Spain, also by projects PID 2020-114109GB-I00/AEI/10.13039/501100011033 (M.J.M) and PID2019-106380RB-I00/AEI/10.13039/501100011033 (F.A.G.V.) funded by Ministry of Science, Innovation and Universities, and Ministry of Science and Innovation, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Particulates Size Distribution of Reactivity Controlled Compression Ignition (RCCI) on a Medium-Duty Engine Fueled with Diesel and Gasoline at Different Engine Speeds

  • Benajes, Jesús|||0000-0002-1653-9188
  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Boronat-Colomer, Vicente
[EN] This work investigates the particulates size distribution of reactivity controlled compression ignition combustion, a dual-fuel concept which combines the port fuel injection of low-reactive/gasoline-like fuels with direct injection of highly reactive/diesel-like fuels. The particulates size distributions from 5-250 nm were measured using a scanning mobility particle sizer at six engine speeds, from 950 to 2200 rpm, and 25% engine load. The same procedure was followed for conventional diesel combustion. The study was performed in a single-cylinder engine derived from a stock medium-duty multi-cylinder diesel engine of 15.3:1 compression ratio. The combustion strategy proposed during the tests campaign was limited to accomplish both mechanical and emissions constraints. The results confirms that reactivity controlled compression ignition promotes ultra-low levels of nitrogen oxides and smoke emissions in the points tested. However, in spite of having similar or lower smoke emissions, the number of particles in some conditions is higher for the reactivity controlled compression ignition than for conventional diesel combustion. Nucleation mode dominates the particle formation for the reactivity controlled compression ignition mode, while accumulation mode dominates the particle formation for conventional diesel combustion. Thus, it is confirmed that the smoke measurement in filter smoke number units cannot be used to correlate the total particle mass for the reactivity controlled compression ignition mode, as typically done for conventional diesel combustion., This investigation has been funded by VOLVO Group Trucks Technology. The authors also acknowledge the Spanish economy and competitiveness ministry for partially supporting this research (HiReCo TRA2014-58870-R). The predoctoral contract of the author V. Boronat (FPI-S2-2017-2882) is granted by the Programa de Apoyo para la Investigacion y Desarrollo (PAID) of the Universitat Politecnica de Valencia. The author J. Monsalve-Serrano acknowledges the financial support from the Universitat Politecnica de Valencia under the grant "Ayudas Para la Contratacion de Doctores para el Acceso al Sistema Espanol de Ciencia, Tecnologia e Innovacion".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modal decomposition of the unsteady flow field in compression-ignited combustion chambers

  • Torregrosa, A. J.|||0000-0003-0933-1626
  • Broatch, A.|||0000-0001-9991-1039
  • García-Tíscar, Jorge|||0000-0003-4934-4587
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
[EN] In this paper, the unsteady behaviour of a compression-ignited (CI) engine combustion chamber is studied by analysing the results of a Computational Fluid Dynamics (CFD) model through the application of different flow decomposition techniques, aiming to resolve the underlying modal structure of the process. Experimental validation for the combustion simulation is provided, and a methodology for extracting coherent pressure information is proposed in order to provide a suitable input for different analysis methods. These range from straightforward Fourier transform techniques to more sophisticated modal decomposition approaches. In particular Proper Orthogonal Decomposition (POD) is shown to provide valuable insight into the time-spatial structure of the combustion flow field, allowing the establishment of correlations between pressure modes and physical parameters of the combustion, such as the injection timing or the chamber geometry. Dynamic Mode Decomposition (DMD) on the other hand is proven to successfully highlight the link between the frequency of the unsteady energy components and their spatial distribution within the chamber. Advantage is then taken of the modal characterization of the unsteady behaviour in the chamber to showcase how physical parameters such as the spray angle can be modified to optimize the acoustic signature of the combustion process, helping CI internal combustion engines reduce their acoustic environmental impact (C) 2017 The Combustion Institute. Published by Elsevier Inc. All rights reserved., The equipment used in this work has been partially supported by FEDER project funds "Dotacidn de infraestructuras cientifico tecnicas para el Centro Integral de Mejora Energetica y Medioambiental de Sistemas de Transporte (CiMeT)" [grant number FEDER-ICTS-2012-06], framed in the operational program of unique scientific and technical infrastructure of the Spanish Government.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fast 3-D heat transfer model for computing internal temperatures in the bearing housing of automotive turbochargers

  • Gil, A.|||0000-0001-7192-6992
  • Tiseira, Andrés-Omar|||0000-0001-9472-2386
  • García-Cuevas González, Luis Miguel|||0000-0001-9340-0617
  • Rodriguez-Usaquen, Yuly Tatiana
  • Mijotte, G.
[EN] Each of the elements that make up the turbocharger has been gradually improved. In order to ensure that the system does not experience any mechanical failures or loss of efficiency, it is important to study which engine operating conditions could produce the highest failing rate. Common failing conditions in turbochargers are mostly achieve due to oil contamination and high temperatures in the bearing system. Thermal management becomes increasingly important for the required engine performance. Therefore, it has become necessary to have accurate temperature and heat transfer models. Most thermal design and analysis codes need data for validation; often the data available falls outside the range of conditions the engine experiences in reality leading to the need to interpolate and extrapolate disproportionately. This paper presents a fast 3D heat transfer model for computing internal temperatures in the central housing for non-water cooled turbochargers and its direct validation with experimental data at different engine operating conditions of speed and load. The presented model allows a detailed study of the temperature rise of the central housing, lubrication channels, and maximum level of temperature at different points of the bearing system of an automotive turbocharger. It will let to evaluate thermal damage done to the system itself and influences on the working fluid temperatures, which leads oil coke formation that can affect the performance of the engine. Thermal heat transfer properties obtained from this model can be used for to feed and improve a radial lumped model of heat transfer that predicts only local internal temperatures[1]. Model validation is illustrated and finally the main results are discussed., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: Authors want to acknowledge the Apoyo para la investigación y Desarrollo (PAID) grant for doctoral studies (FPI-2016-S2-1354).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Parameter Identification in Synthetic Biological Circuits Using Multi-Objective Optimization

  • Boada-Acosta, Yadira Fernanda|||0000-0001-5677-2702
  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Picó, Jesús|||0000-0003-4144-3521
  • Reynoso Meza, Gilberto
[EN] Synthetic biology exploits the of mathematical modeling of synthetic circuits both to predict the behavior of the designed synthetic devices, and to help on the selection of their biological coin portents. The increasing complexity of the circuits being designed requires performing approximations and model reductions to get handy models. Parameter estimation in these models remains a challenging problem that has usually been addressed by optimizing the weighted combination of different prediction errors to obtain a single solution. The single-objective approach is inadequate to incorporate different kinds of experiments, and to identify parameters for an ensemble of biological circuit models. We present a methodology based on multi-objective optimization to perform parameter estimation that can fully harness to ensembles of local models for biological circuits. The methodology uses a global multi-objective evolutionary algorithm and a multi-criteria decision making strategy to select the most suitable solutions. Our approach finds an approximation to the Pareto optimal set of model parameters that correspond to each experimental scenario. Then, the Pareto set was clustered according to the experimental scenarios. This, in turn, allows to analyze the sensitivity of model parameters for different scenarios. Finally, we show the methodology applicability through the case study of a genetic incoherent feed-forward circuit, under different concentrations of the inducer input signal. (C) 2016 IFAC (International Federation Of Automatic Control) Hosting by Elsevier Ltd. All rights reserved., This work is partially supported by Spanish government and European Union (FEDER-CICYT DPI2011-28112-C04-01, and DPI2014-55276-C5-1). Y.B. thanks grant FP/2013-3242 of Universitat Politecnica de Valencia and Becas Iberoamerica of Santander Group, Spain 2015. G.R.M. thanks the partial support provided by the postdoctoral fellowship BJT-304804/2014-2 from the National Council of Scientific and Technologic Development of Brazil. A.V. thanks the Max Planck Society, the CSBD and the MPI-CBG. We are grateful to Dr. C,Bauerl and Dr, D. Provencio at the SB2CLab for their help in plasmid construction and getting experimental data. Also to Dr. V. Monedero at IATACSIC for allowing us to use the POLARstar plate reader at his lab,
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Controller tuning by means of evolutionary multiobjective optimization: current trends and applications

  • Reynoso Meza, Gilberto
  • Blasco, Xavier|||0000-0002-9737-2833
  • Sanchís Saez, Javier|||0000-0001-9697-2696
  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
Control engineering problems are generally multi-objective problems; meaning that there are several specifications and requirements that must be fulfilled. A traditional approach for calculating a solution with the desired trade-off is to define an optimisation statement. Multi-objective optimisation techniques deal with this problem from a particular perspective and search for a set of potentially preferable solutions; the designer may then analyse the trade-offs among them, and select the best solution according to his/her preferences. In this paper, this design procedure based on evolutionary multiobjective optimisation (EMO) is presented and significant applications on controller tuning are discussed. Throughout this paper it is noticeable that EMO research has been developing towards different optimisation statements, but these statements are not commonly used in controller tuning. Gaps between EMO research and EMO applications on controller tuning are therefore detected and suggested as potential trends for research., The first author is grateful for the hospitality and availability of the UTC at the University of Sheffield during his academic research stay at 2011; especially to Dr. P.J. Fleming for his valuable comments and insights in the development of this paper. This work was partially supported by Grant FPI-2010/19 and project PAID-2011/2732 from the Universitat Politecnica de Valencia and projects TIN2011-28082 and ENE2011-25900 from the Spanish Ministry of Economy and Competitiveness.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A study on tip penetration velocity and radial expansion of reacting diesel sprays with different fuels

  • Desantes J.M.|||0000-0002-4124-9393
  • García-Oliver, José M|||0000-0002-2676-9681
  • Xuan, Tiemin
  • Vera-Tudela-Fajardo, Walter Martin
[EN] The reacting diesel spray structure was investigated using n-dodecane, n-heptane and one binary blend of Primary Reference Fuels (80% n-heptane and 20% iso-octane in mass) based on the existing database from previous experimental results from Schlieren imaging technique in a constant pressure combustion chamber. The spray tip velocity was derived from the derivative of tip penetration versus time. The operating conditions and the injector used (single axially-oriented hole, 89 mm-diameter) were chosen following the guidelines of the Engine Combustion Network. A 1D spray model was also applied here to support the analysis of experimental results. Parametric variations of injection pressure, ambient temperature and oxygen concentration have been performed for each fuel. Analysis of radial expansion and reacting tip velocity was performed in terms of an average spray radial increase (DR) and a constant (k) defining the tip penetration velocity. k values of reacting cases are always bigger than those from inert ones for both experimental and theoretical results. Based upon this parameter, quasi-steady tip penetration under the investigated conditions seems not to be affected by ambient temperature, oxygen content or fuel cetane number. Three cases with different fuels and similar ignition delay and lift-off length were further analyzed, which shows that the reactivity of the mixture has an effect on the transition timing from inert to reacting states, as well as on the initial penetration stages, but not on the quasi-steady phase. Apart from the similar tip velocity during quasi-steady phase, the full transient evolution of the tip is highly similar. The fact that this full overlap does not occur for other operating conditions indicates that early penetration stages are highly affected by the transient chemistry development, which largely depends on fuel cetane number., This study was partially funded by the Spanish Ministry of Economy and Competitiveness in the frame of the COMEFF (TRA2014-59483-R) project. Funding for Tiemin Xuan's PhD studies was granted by Universitat Politecnica de Valencia through the Programa de Apoyo para la Investigacion y Desarrollo (PAID) (Grant reference FPI-2015-S2-1068).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Human Mobility Prediction with Region-based Flows and Water Consumption

  • Terroso-Sáenz, Fernando
  • Muñoz, Andrés
  • Fernández-Pedauyé, Julio José
  • Cecilia-Canales, José María|||0000-0001-5648-214X
[EN] We are witnessing an increasing need to accurately measure people's mobility as it has become an instrumental factor for the development of innovative services in multiple domains. In this context, several ICT solutions have relied on location-based technologies such as GPS, WiFi or Bluetooth to track individual's movements. However, these technologies are limited by the privacy restrictions of data providers. In this paper we propose a methodology to robustly predict citizens' mobility patterns based on heterogeneous data from different sources. Particularly, our methodology focuses on a human mobility predictor based on a low-resolution mobility dataset and the use of water consumption data as a facilitator of this prediction task. As a result, this work explores whether the water consumption within a geographical region can reveal human activity patterns relevant from the point of view of the mobility mining discipline. This approach has been tested in a residential area near Madrid (Spain) obtaining quite promising results., This work was supported in part by the Spanish Ministry of Science and Innovation, through the Ramon y Cajal Program under Grant RYC2018-025580-I, Grant RTI2018-096384-B-I00, and Grant RTC-2017-6389-5; in part by the Fundacion Seneca del Centro de Coordinacion de la Investigacion de la Region de Murcia under Project 20813/PI/18, and in part by the "Conselleria de Educacion, Investigacion, Cultura y Deporte, Direccio General de Ciencia i Investigacio, Proyectos AICO/2020," Spain, under Grant AICO/2020/302.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Differentiability of L-p of a vector measure and applications to the Bishop-Phelps-Bollobas property

  • Agud Albesa, Lucia|||0000-0002-1222-7988
  • Calabuig, J. M.|||0000-0001-8398-8664
  • Sánchez Pérez, Enrique Alfonso|||0000-0001-8854-3154
  • Lajara, Sebastian
[EN] We study the properties of Gâteaux, Fréchet, uniformly Fréchet and uniformly Gâteaux smoothness of the space Lp(m) of scalar p-integrable functions with respect to a positive vector measure m with values in a Banach lattice. Applications in the setting of the Bishop-Phelps-Bollobás property (both for operators and bilinear forms) are also given., Research supported by Ministerio de Economia y Competitividad and FEDER under projects MTM2012-36740-c02-02 (L. Agud and E.A. Sanchez-Perez), MTM201453009-P (J.M. Calabuig) and MTM2014-54182-P (S. Lajara). S. Lajara was also supported by project 19275/PI/14 funded by Fundacion Seneca-Agencia de Ciencia y Tecnologia de la Region de Murcia within the framework of PCTIRM 2011-2014.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of chronic exercise on myocardial electrophysiological heterogeneity and stability. Role of intrinsic cholinergic neurons: A study in the isolated rabbit heart

  • Such-Miquel, Luis
  • Brines-Ferrando, L.
  • Alberola, Antonio
  • Zarzoso Muñoz, Manuel
  • Chorro Gasco, Francisco J.
  • Guerrero-Martínez, Juan F.
  • Parra-Giraldo, G.
  • Gallego, N.
  • Soler, C.
  • Canto Serrano, Irene Del
  • Such Belenguer, Luis
  • Guill Ibáñez, Antonio|||0000-0001-8546-264X
[EN] A study has been made of the effect of chronic exercise on myocardial electrophysiological heterogeneity and stability, as well as of the role of cholinergic neurons in these changes. Determinations in hearts from untrained and trained rabbits on a treadmill were performed. The hearts were isolated and perfused. A pacing electrode and a recording multielectrode were located in the left ventricle. The parameters determined during induced VF, before and after atropine (1 mu M), were: fibrillatory cycle length (VV), ventricular functional refractory period (FRPVF), normalized energy (NE) of the fibrillatory signal and its coefficient of variation (CV), and electrical ventricular activation complexity, as an approach to myocardial heterogeneity and stability. The VV interval was longer in the trained group than in the control group both prior to atropine (78 +/- 10 vs. 68 +/- 10 ms) and after atropine (76 +/- 8 vs. 67 +/- 10 ms). Likewise, FRPVF was longer in the trained group than in the control group both prior to and after atropine (53 +/- 8 vs. 42 +/- 7 ms and 50 +/- 6 vs. 40 +/- 6 ms, respectively), and atropine did not modify FRPVF. The CV of FRPVF was lower in the trained group than in the control group prior to atropine (12.5 +/- 1.5% vs. 15.1 +/- 3.8%) and, decreased after atropine (15.1 +/- 3.8% vs. 12.2 +/- 2.4%) in the control group. The trained group showed higher NE values before (0.40 +/- 0.04 vs. 0.36 +/- 0.05) and after atropine (0.37 +/- 0.04 vs. 0.34 +/- 0.06; p = 0.08). Training decreased the CV of NE both before (23.3 +/- 2% vs. 25.2 +/- 4%; p = 0.08) and after parasympathetic blockade (22.6 +/- 1% vs. 26.1 +/- 5%). Cholinergic blockade did not modify these parameters within the control and trained groups. Activation complexity was lower in the trained than in the control animals before atropine (34 +/- 8 vs. 41 +/- 5), and increased after atropine in the control group (41 +/- 5 vs. 48 +/- 9, respectively). Thus, training decreases the intrinsic heterogeneity of the myocardium, increases electrophysiological stability, and prevents some modifications due to muscarinic block., This research was supported by the Spanish Ministry of Education and Science, (DEP2007-73234-C03-01 to AMA), http://www.mecd.gob.es/portada-mecd/; and the Generalitat Valenciana (PROMETEO 2010/093 to FJC, and FPI/2008/003 to MZ), http://www.gva.es/va/inicio/presentacion; jsessionid=ydprbDQZTsCTz85W1
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

WATERSensing: A Smart Warning System for Natural Disasters in Spain

  • Cecilia-Canales, José María|||0000-0001-5648-214X
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Periñán-Pascual, Carlos|||0000-0002-6483-4712
  • Arcas-Túnez, Francisco
  • Muñoz-Ortega, Andrés
[EN] Floods are expected to increase in the coming years due to global warming. The early identification of water-based disasters can be lifesaving, and the challenge is to identify appropriate and timely warning measures. Social-media tools such as Twitter provide citizens with a real-time communication channel for reporting problems related to our environment, which allows humans to act as social sensors. In this article, we show the main results and lessons learned from the research project WATERoT, funded by the Spanish government. In this project, we designed a social sensing application (called WATERSensing) for the prevention and evaluation of water-related disasters with the participation of individuals through social networks. This tool crawls microtexts from different social networks such as Twitter, RSS feeds, or Telegram, which are analyzed with natural language processing techniques. A case study of Storm Gloria, a Mediterranean storm that heavily affected eastern Spain in January 2020, is presented to evidence that the system can correlate data from social media with actual events. We demonstrate that the analysis of different sources of information opens up new opportunities in the development of warning systems for the prevention, early identification, and management of natural disasters., This work was supported in part by the Spanish Ministry of Science and Innovation under Grant RYC2018-025580-I, Grant RTI2018-096384-B-I00, Grant RTC-2017-6389-5, and Grant RTC2019007159-5; in part by the Fundacion Seneca del Centro de Coordinacion de la Investigacion de la Region de Murcia under Project 20813/PI/18; and in part by the European Union's Horizon 2020 Research and Innovation Programme under Grant 101017861.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thorough Characterization of ETHQB3.5, a QTL Involved in Melon Fruit Climacteric Behavior and Aroma Volatile Composition

  • Dos-Santos, Noelia
  • Bueso, María C.
  • Diaz, Aurora
  • Moreno, Eduard
  • Garcia-Mas, Jordi
  • Fernández-Trujillo, Juan Pablo
  • Monforte Gilabert, Antonio José|||0000-0003-3461-3094
[EN] The effect of the QTL involved in climacteric ripening ETHQB3.5 on the fruit VOC composition was studied using a set of Near-Isogenic Lines (NILs) containing overlapping introgressions from the Korean accession PI 16375 on the chromosome 3 in the climacteric 'Piel de Sapo' (PS) genetic background. ETHQB3.5 was mapped in an interval of 1.24 Mb that contained a NAC transcription factor. NIL fruits also showed differences in VOC composition belonging to acetate esters, non-acetate esters, and sulfur-derived families. Cosegregation of VOC composition (23 out of 48 total QTLs were mapped) and climacteric ripening was observed, suggesting a pleiotropic effect of ETHQB3.5. On the other hand, other VOCs (mainly alkanes, aldehydes, and ketones) showed a pattern of variation independent of ETHQB3.5 effects, indicating the presence of other genes controlling non-climacteric ripening VOCs. Network correlation analysis and hierarchical clustering found groups of highly correlated compounds and confirmed the involvement of the climacteric differences in compound classes and VOC differences. The modification of melon VOCs may be achieved with or without interfering with its physiological behavior, but it is likely that high relative concentrations of some type of ethylene-dependent esters could be achieved in climacteric cultivars., This research was supported by the Ministry of Innovation and Science (at present, Ministry of Economy and Competitiveness) and Regional Development of European Union FEDER funds (AGL2010-20858, AGL2012-40130-C02-02, AGL2003-09175-C02-01, and AGL2003-09175-C02- 02), Fundación Séneca de la Región de Murcia (projects 11784/PI/09, 05676/PI/07 and 00620/PI/04), and Consejería de Educación de la Región de Murcia (BIO-AGR06/02-0011). N. Dos-Santos was supported by an FPU-MEC AP2006-01565 fellowship (Ministry of Education, Spain). A. Díaz was supported by a JAE-Doc contract from CSIC.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mobile crowdsensing approaches to address the COVID-19 pandemic in Spain

  • Cecilia-Canales, José María|||0000-0001-5648-214X
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Mobile crowdsensing (MCS) is a technique where people with computing and sensing devices such as smartphones collectively share data that are of potential interest to the rest of society. MCS includes two different trends (i) mobile sensing, which shares raw data generated from the sensors that are embedded in mobile devices, and (ii) social sensing, which uses the information shared by people in online social networks (OSNs). In this study, the authors present the timeline evolution of the COVID¿19 pandemic in Spain, and summarise the MCS research efforts that are being undertaken by the Spanish community to address COVID¿19 outbreak. Indeed, the COVID¿19 pandemic is putting today's society at risk; lockdown and social distancing measures proposed by governments are dramatically affecting economies. In this regard, MCS tools can become a powerful solution to provide smart quarantine strategies in periods of a steep decrease of infections, or new outbreaks., This work was partially supported by the Fundación Séneca del Centro de Coordinación de la Investigación de la Región de Murcia under Project 20813/PI/18, and by the Spanish Ministry of Science, Innovation and Universities under grants RTI2018-096384-B-I00 and RTC-2017-6389-5.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of Clustering Algorithms on GPU-Based Edge Computing Platforms

  • Cecilia-Canales, José María|||0000-0001-5648-214X
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Morales-García, Juan
  • Llanes, Antonio
  • Imbernón, Baldomero
[EN] Internet of Things (IoT) is becoming a new socioeconomic revolution in which data and immediacy are the main ingredients. IoT generates large datasets on a daily basis but it is currently considered as "dark data", i.e., data generated but never analyzed. The efficient analysis of this data is mandatory to create intelligent applications for the next generation of IoT applications that benefits society. Artificial Intelligence (AI) techniques are very well suited to identifying hidden patterns and correlations in this data deluge. In particular, clustering algorithms are of the utmost importance for performing exploratory data analysis to identify a set (a.k.a., cluster) of similar objects. Clustering algorithms are computationally heavy workloads and require to be executed on high-performance computing clusters, especially to deal with large datasets. This execution on HPC infrastructures is an energy hungry procedure with additional issues, such as high-latency communications or privacy. Edge computing is a paradigm to enable light-weight computations at the edge of the network that has been proposed recently to solve these issues. In this paper, we provide an in-depth analysis of emergent edge computing architectures that include low-power Graphics Processing Units (GPUs) to speed-up these workloads. Our analysis includes performance and power consumption figures of the latest Nvidia's AGX Xavier to compare the energy-performance ratio of these low-cost platforms with a high-performance cloud-based counterpart version. Three different clustering algorithms (i.e., k-means, Fuzzy Minimals (FM), and Fuzzy C-Means (FCM)) are designed to be optimally executed on edge and cloud platforms, showing a speed-up factor of up to 11x for the GPU code compared to sequential counterpart versions in the edge platforms and energy savings of up to 150% between the edge computing and HPC platforms., This work has been partially supported by the Spanish Ministry of Science and Innovation, under the Ramon y Cajal Program (Grant No. RYC2018-025580-I) and under grants RTI2018-096384-B-I00, RTC-2017-6389-5 and RTC2019-007159-5 and by the Fundacion Seneca del Centro de Coordinacion de la Investigacion de la Region de Murcia under Project 20813/PI/18.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A high-performance IoT solution to reduce frost damages in stone fruits

  • Guillén-Navarro, Miguel A.
  • Martínez-España, Raquel
  • López, Belén
  • Cecilia-Canales, José María|||0000-0001-5648-214X
[EN] Agriculture is one of the key sectors where technology is opening new opportunities to break up the market. The Internet of Things (IoT) could reduce the production costs and increase the product quality by providing intelligence services via IoT analytics. However, the hard weather conditions and the lack of connectivity in this field limit the successful deployment of such services as they require both, ie, fully connected infrastructures and highly computational resources. Edge computing has emerged as a solution to bring computing power in close proximity to the sensors, providing energy savings, highly responsive web services, and the ability to mask transient cloud outages. In this paper, we propose an IoT monitoring system to activate anti-frost techniques to avoid crop loss, by defining two intelligent services to detect outliers caused by the sensor errors. The former is a nearest neighbor technique and the latter is the k-means algorithm, which provides better quality results but it increases the computational cost. Cloud versus edge computing approaches are analyzed by targeting two different low-power GPUs. Our experimental results show that cloud-based approaches provides highest performance in general but edge computing is a compelling alternative to mask transient cloud outages and provide highly responsive data analytic services in technologically hostile environments., This work was partially supported by the Fundación Séneca del Centro de Coordinación de la Investigación de la Región de Murcia under Project 20813/PI/18, and by Spanish Ministry of Science, Innovation and Universities under grants TIN2016-78799-P (AEI/FEDER, UE) and RTC-2017-6389-5. Finally, we thank the farmers for the availability of their resources to be able to asses and improve the IoT monitoring system proposed.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Metal Node Control of Bronsted Acidity in Heterobimetallic Titanium-Organic Frameworks

  • Rubio-Gaspar, Ana
  • Tatay, Sergio
  • Cirujano, Francisco G.
  • Fernández-Conde, Carmen
  • Padial, Natalia M.
  • Martí-Gastaldo, Carlos
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
[EN] Compared to indirect framework modification, synthetic control of cluster composition can be used to gain direct access to catalytic activities exclusive of specific metal combinations. We demonstrate this concept by testing the aminolysis of epoxides with a family of isostructural mesoporous frameworks featuring five combinations of homometallic and heterobimetallic metal-oxo trimers (Fe3, Ti3, TiFe2, TiCo2, and TiNi2). Only TiFe2 nodes display activities comparable to benchmark catalysts based on grafting of strong acids, which here originate from the combination of Lewis Ti4+ and Bronsted Fe3+-OH acid sites. The applicability of MUV-101(Fe) to the synthesis of beta-amino alcohols is demonstrated with a scope that also includes the gram scale synthesis of propranolol, a natural beta-blocker listed as an essential medicine by the World Health Organization, with excellent yield and selectivity., This work was supported by the EU (ERC Stg Chem-fs-MOF 714122), the Generalitat Valenciana (PROMETEU/2021/054, SEJIGENT/2021/059 and IDIFEDER/2021/075) and the Spanish government (CEX2019-000919-M , PID2020-118117RB-I00, and EUR2021-121999). S.N. is gratef u l to grant PID2021-123856OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", by the "European Union". A.R.-G. tha n k s the Generalitat Valenciana for a PhD fellowship (ACIF/2020/090). N.M.P. and F.G.C. thank La Caixa Foundation for Postdoctoral Junior Leader-Retaining Fellowships (ID 100010434 and 100010434, and fellowship codes LCF/BQ/PR20/11770014 and LCF/BQ/PI19/11690011).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Some remarks on Phelps property U of a Banach space into C(K) spaces

  • Cobollo-Gómez, Christian|||0000-0002-5901-5798
  • Guirao Sánchez, Antonio José|||0000-0002-1031-3954
  • Montesinos Santalucia, Vicente
[EN] A subspace X of a Banach space Y has Property U whenever every continuous linear functional on X has a unique norm-preserving (i.e., Hahn-Banach) extension to Y (Phelps in Trans Am Math Soc 95:238-255, 1960). Throughout this document, we introduce and develop a systematic study of the existence of U-embeddings between Banach spaces X and Y, that is, isometric embeddings of X into Y whose ranges have property U. In particular, we focus on the case Y = C(K), where K is a compact Hausdorff topological space. We provide results for X a reflexive or another C(K) space., The authors were partially supported by the Universitat Politecnica de Valencia (Spain) and by Grant PID2021-122126NB-C33 funded by national MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe". Ch. Cobollo was also supported by Generalitat Valenciana (Project PROMETEU/2021/070 and CIACIF/2021/378) and by MCIN/AEI/ 10.13039/ 501100011033 (Project PID2019-105011GB). A. J. Guirao was also supported by Fundacion Seneca, Region de Murcia (Grant 19368/PI/14). V. Montesinos was also supported by AEI/FEDER (Project MTM2017-83262-C2-1-P of Ministerio de Economia y Competitividad). We thank two anonymous referees for their valuable suggestions to improve the content and structure of the present paper. In particular, Remark 4.10 and Proposition 6.31 were suggested by one of them.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A new trifocal corneal inlay for presbyopia

  • Furlan, Walter D.
  • Montagud-Martínez, Diego
  • Garcia-Delpech, Salvador
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] Corneal inlays (CIs) are the most recent surgical procedure for the treatment of presbyopia in patients who want complete independence from the use of glasses or contact lenses. Although refractive surgery in presbyopic patients is mostly performed in combination with cataract surgery, when the implantation of an intraocular lens is not necessary, the option of CIs has the advantage of being minimally invasive. Current designs of CIs are, either: small aperture devices, or refractive devices, however, both methods do not have good performance simultaneously at intermediate and near distances in eyes that are unable to accommodate. In the present study, we propose the first design of a trifocal CI, allowing good vision, at the same time, at far, intermediate and near vision in presbyopic eyes. We first demonstrate the good performance of the new inlay in comparison with a commercially available CI by using optical design software. We next confirm experimentally the image forming capabilities of our proposal employing an adaptive optics based optical simulator. This new design also has a number of parameters that can be varied to make personalized trifocal CI, opening up a new avenue for the treatment of presbyopia., This work was supported by Ministerio de Ciencia e Innovacion, Spain (Grant PID2019-107391RB-I00) and by Generalitat Valenciana, Spain, (Grant PROMETEO/2019/048). D. Montagud-Martinez and V. Ferrando acknowledge the financial support from the Universitat Politecnica de Valencia, Spain (fellowships FPI-2016 and PAID-10-18, respectively)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A zonal approach for estimating pressure ratio at compressor extreme off-design conditions

  • Galindo, José|||0000-0001-6068-182X
  • Navarro, Roberto|||0000-0003-2587-4954
  • García-Cuevas González, Luis Miguel|||0000-0001-9340-0617
  • Tarí, Daniel
  • Tartoussi, H.
  • Guilain, S.
[EN] Zero-dimensional/one-dimensional computational fluid dynamics codes are used to simulate the performance of complete internal combustion engines. In such codes, the operation of a turbocharger compressor is usually addressed employing its performance map. However, simulation of engine transients may drive the compressor to work at operating conditions outside the region provided by the manufacturer map. Therefore, a method is required to extrapolate the performance map to extended off-design conditions. This work examines several extrapolating methods at the different off-design regions, namely, low-pressure ratio zone, low-speed zone and high-speed zone. The accuracy of the methods is assessed with the aid of compressor extreme off-design measurements. In this way, the best method is selected for each region and the manufacturer map is used in design conditions, resulting in a zonal extrapolating approach aiming to preserve accuracy. The transitions between extrapolated zones are corrected, avoiding discontinuities and instabilities., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: Daniel Tari is partially supported through contract FPI-S2-2015-1095 of Programa de Apoyo para la Investigacion y Desarrollo (PAID) of Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Generación Automática de Software para Sistemas de Tiempo Real: Un Enfoque basado en Componentes, Modelos y Frameworks, Automatic Code Generation for Real–Time Systems: a Development Approach based on Components, Models, and Frameworks

  • Alonso, Diego
  • Pastor, Juan Ángel
  • Sánchez, Pedro
  • Álvarez, Bárbara
  • Vicente Chicote, Cristina
[EN] Real-Time Systems have some characteristics that make them particularly sensitive to architectural decisions. The use of Frameworks and Components has proven effective in improving productivity and software quality, especially when combined with Software Product Line approaches. However, the results in terms of software reuse and standardization make the lack of portability of both the design and componentbased implementations clear. This article, based on the Model- Driven Software Development paradigm, presents an approach that separates the component-based description of real-time applications from their possible implementations on different platforms. This separation is supported by the automatic integration of the code obtained from the input models into object-oriented frameworks. The article also details the architectural decisions taken in the implementation of one of such frameworks, which is used as a case study to illustrate the proposed approach. Finally, a comparison with other alternative approaches is made in terms of development cost., [ES] Los Sistemas de Tiempo-Real poseen características que los hacen particularmente sensibles a las decisiones arquitectónicas que se adopten. El uso de Frameworks y Componentes ha demostrado ser eficaz en la mejora de la productividad y calidad del software, sobre todo si se combina con enfoques de Líneas de Productos. Sin embargo, los resultados en cuanto a reutilización y estandarización dejan patente la ausencia de portabilidad tanto de los diseños como las implementaciones basadas en componentes. Este artículo, fundamentado en el Desarrollo de Software Dirigido por Modelos, presenta un enfoque que separa la descripción de aplicaciones de tiempo–real basadas en componentes de sus posibles implementaciones para distintas plataformas. Esta separación viene soportada por la integración automática del código obtenido a partir de los modelos de entrada en frameworks implementados usando tecnología orientada a objetos. Asimismo, se detallan las decisiones arquitectónicas adoptadas en la implementación de uno de estos frameworks, que se utilizará como caso de estudio para ilustrar los beneficios derivados del enfoque propuesto. Por último, se realiza una comparativa en términos de coste de desarrollo con otros enfoques alternativos., Este trabajo ha sido parcialmente financiado por los proyectos EXPLORE (CICYT ref. TIN2009-08572) y MISSION-SICUVA (Fundación Séneca ref. 15374/PI/10).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Empirical Installation of Linear Algebra Shared-Memory Subroutines for Auto-Tuning

  • Cámara, Jesús
  • Cuenca, Javier
  • Giménez, Domingo
  • García, Luis Pedro
  • Vidal Maciá, Antonio Manuel
The introduction of auto-tuning techniques in linear algebra shared-memory routines is analyzed. Information obtained in the installation of the routines is used at running time to take some decisions to reduce the total execution time. The study is carried out with routines at different levels (matrix multiplication, LU and Cholesky factorizations and linear systems symmetric or general routines) and with calls to routines in the LAPACK and PLASMA libraries with multithread implementations. Medium NUMA and large cc-NUMA systems are used in the experiments. This variety of routines, libraries and systems allows us to obtain general conclusions about the methodology to use for linear algebra shared-memory routines auto-tuning. Satisfactory execution times are obtained with the proposed methodology., Partially supported by Fundacion Seneca, Consejeria de Educacion de la Region de Murcia, 08763/PI/08, PROMETEO/2009/013 from Generalitat Valenciana, the Spanish Ministry of Education and Science through TIN2012-38341-C04-03, and the High-Performance Computing Network on Parallel Heterogeneus Architectures (CAPAP-H). The authors gratefully acknowledge the computer resources and assistance provided by the Supercomputing Centre of the Scientific Park Foundation of Murcia and by the Centre de Supercomputacio de Catalunya.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Volumetric efficiency modelling of internal combustion engines based on a novel adaptive learning algorithm of artificial neural networks

  • Luján, José M.|||0000-0001-6133-8943
  • Climent, H.|||0000-0002-2407-5651
  • García-Cuevas González, Luis Miguel|||0000-0001-9340-0617
  • Moratal-Martínez, Ausias Alberto
[EN] Air mass flow determination is one of the main variables on the control of internal combustion engines. Effectiveness of intake air systems is evaluated through the volumetric efficiency coefficient. Intake air systems characterization by means of physical models needs either significant amount of input data or notable calculation times. Because of these drawbacks, empirical approaches are often used by means of black-box models based on Artificial Neural Networks. As alternative to the standard gradient descendent method an adaptive learning algorithm is developed based on the increase of hidden layer weight update speed. The results presented in this paper show that the proposed adaptive learning method performs with higher learning speed, reduced computational resources and lower network complexities. A parametric study of several Multiple Layer Perceptron (MLP) networks is carried out with the variation of the number of epochs, number of hidden neurons, momentum coefficient and learning algorithm. The training and validation data are obtained from steady state tests carried out in an automotive turbocharged diesel engine. (C) 2017 Elsevier Ltd. All rights reserved., Authors want to acknowledge the "Apoyo para la investigacion y Desarrollo (PAID)", grant for doctoral studies (FPI S1 2015 2512), of Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Interpolation subspaces of L^1 of a vector measure and norminequalities for the integration operator

  • Calabuig, J. M.|||0000-0001-8398-8664
  • Sánchez Pérez, Enrique Alfonso|||0000-0001-8854-3154
  • Rodríguez Ruiz, José
[EN] Let m be a Banach space valued measure. We study some domination properties of the integration operator that are equivalent to the existence of Banach ideals of L1(m) that are interpolation spaces. These domination properties are closely connected with some interpolated versions of summing operators, like (p, è)-absolutely continuous operators., J.M. Calabuig was supported by Ministerio de Ciencia e Innovacion (project MTM2008-04594) and Generalitat Valenciana (project GV/2009/102). J. Rodriguez was supported by Ministerio de Ciencia e Innovacion (project MTM2008-05396) and Fundacion Seneca (project 08848/PI/08). E.A. Sanchez-Perez was supported by Ministerio de Ciencia e Innovacion (project MTM2009-14483-C02-02). The authors were also supported by Universidad Politecnica de Valencia (project PAID-06-08-3093).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of the number of injections on piston heat rejection under low temperature combustion conditions in an optical compression-ignition engine

  • Tanov, Slavey
  • Salvador-Iborra, Josep
  • Andersson, Öivind
  • Olmeda, P.|||0000-0002-3161-0165
  • García Martínez, Antonio|||0000-0001-5783-4936
[EN] New combustion concepts are being investigated to develop cleaner engines. One of the most promising is partially premixed combustion. The mechanisms of this combustion mode and its impact on performance and emissions have been studied in the previous years. Nevertheless, little research has been done from the point of view of heat transfer. In particular, the influence of the injection strategy on heat transfer is of great interest in partially premixed combustion. This work presents a method to calculate convective heat transfer to the piston. The method uses a combination of gas velocity models and experimental velocity data measured with the PIV technique. This method was applied to achieve the goal of studying the effect of the number of injections on heat rejection. First, the influence of the injection strategy on gas motion was examined. To do that, an analysis of the velocity components relevant to gas-surface convection was conducted, as well as of the resulting heat transfer coefficient. Next, heat flux results were discussed. The single injection strategy showed the highest heat transfer, followed by triple injection and double injection. Important instantaneous variations of heat flux were observed at different locations of the piston bowl. All findings were associated with concurring conditions of high gas velocity, density and temperature., The authors gratefully acknowledge the Swedish Energy Agency Sweden and the Competence Center for Combustion Processes KCFP. The authors also would like to acknowledge that part of the work has been partially funded by the Spanish government under the grant José Castillejo (JC2015/0036). Research leading to this work has also received funding from Universitat Politècnica de València Spain through the contract FPI-S2-2016 1357 of Programa de Apoyo para la Investigación y Desarrollo (PAID-01 16) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tuning Ternary Alloyed Nanoparticle Composition and Morphology by Exsolution in Double Perovskite Electrodes for CO2 Electrolysis

  • López-García, Andrés
  • Almar-Liante, Laura|||0000-0001-5103-3812
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Carrillo-Del Teso, Alfonso Juan
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Hungría, Ana B.
[EN] The intermittent nature of renewable energy resources makes imperative the development of efficient energy storage technologies. Solid oxide electrolysis cells (SOECs) are a promising alternative to energy conversion devices. SOECs can play an important role in the control of greenhouse gases by improving processes such as CO2 electrolysis. In order to enhance SOEC performance, exsolution of metal nanoparticles is emerging for the catalytic surface functionalization of electrodes, preventing sintering issues related to classical impregnation methods and enabling tailoring specific catalytic functions. In this work, a medium-entropy, double perovskite system SrxFeCo0.2Ni0.2Mn0.1Mo0.5O6-delta (x = 2.0, 1.9, and 1.8) was studied. We provide evidence of Fe-Co-Ni ternary alloyed exsolved nanoparticles, revealing that the alloy composition can be tuned by adjusting the reducing conditions. Exsolution temperature is critical for Fe content in nanoparticles, increasing as temperature increases, but Ni and Co are not significantly affected. Temperature adjustments allowed control over nanoparticle size and population, shrinking and growing, respectively, as temperature decreases. In contrast to what is usually described, A-site deficiency resulted in a decrease in nanoparticle exsolution because of NiO phase formation in x = 1.9 and 1.8, so that the x = 2.0 compound outperformed both non-stoichiometric materials, showing significantly larger populations. The three compounds exhibit important conductivity under both oxidizing and reducing atmospheres, which makes them promising electrodes. The Sr2FeCo0.2Ni0.2Mn0.1Mo0.5O6-delta material was integrated as a cathode in an asymmetrical electrolyte-supported cell, and its electrochemical performance under CO2 electrolysis conditions was studied. Our results showed a boost in electrocatalytic activity upon exsolution at 600 degrees C when compared to the fuel electrode without exsolved nanoparticles or exsolved at 800 degrees C, where the appearance of the secondary Ruddlesden-Popper phase was observed. Overall, here, we proved the possibility of obtaining ternary alloy exsolved nanoparticles and tuning their composition to enhance the performance of SOEC devices, paving the path for optimized metal-alloyed exsolved nanoparticle design, which might extend its applicability to other electrocatalytic processes in energy conversion and storage., The project that gave rise to these results received the support of a fellowship from Spanish Government (RTI2018-102161 grant) and "la Caixa" Foundation (ID 100010434 and grant LCF/BQ/PI20/11760015). Authors acknowledge the use of instrumentation and the technical advice provided by the National Facility ELECMI ICTS, node "Division de Microscopia Electronica"at Universidad de Cadiz. We thank the support of the Electronic Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A new tool to test the IP network performance

  • Barambones, Carlos
  • García-García, Laura
  • Jimenez, Jose M.|||0000-0002-3688-7235
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] One of the main necessities in IP networks is the lack of tools to test the performance of the network when it is already implemented. Network management tools are generally used when it is required to test what happens in the network after a failure and when the administrators need to measure the amount of time it takes to recover from unexpected events. But, this solution does not allow testing the traffic that is being distributed inside of the network or to measure the exact time the network takes to recover from a failure. In this paper, we present a new tool to carry out network performance tests when it is already implemented. The displayed parameters are jitter, delay, received messages, lost messages, % of lost messages, and bandwidth. In order to test its effectiveness, we conduct a series of measurements on a real network., This work has been supported by the “Ministerio de Economía y Competitividad”, through the “Convocatoria 2014. Proyectos I+D - Programa Estatal de Investigación Científica y Técnica de Excelencia” in the “Subprograma Estatal de Generación de Conocimiento”, project TIN2014-57991-C3-1-P and the “programa para la Formación de Personal Investigador – (FPI-2015-S2-884)” by the “Universitat Politècnica de València”.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Gamma-flatness and Bishop-Phelps-Bollobas type theorems for operators

  • Cascales Salinas, Bernardo
  • Kadets, Vladimir
  • Soloviova, Mariia
  • Guirao Sánchez, Antonio José|||0000-0002-1031-3954
[EN] The Bishop-Phelps-Bollobas property deals with simultaneous approximation of an operator T and a vector x at which T nearly attains its norm by an operator T-o and a vector x(o), respectively, such that T-o attains its norm at x(o). In this note we extend the already known results about the Bishop-Phelps Bollobas property for Asplund operators to a wider class of Banach spaces and to a wider class of operators. Instead of proving a BPB-type theorem for each space separately we isolate two main notions: Gamma-flat operators and Banach spaces with ACK(rho) structure. In particular, we prove a general BPB-type theorem for Gamma-flat operators acting to a space with ACK(rho) structure and show that uniform algebras and spaces with the property beta have ACK(rho) structure. We also study the stability of the ACK(rho) structure under some natural Banach space theory operations. As a consequence, we discover many new examples of spaces Y such that the Bishop-Phelps-Bollobas property for Asplund operators is valid for all pairs of the form (X, Y)., The research of the first, second and third authors was partially supported by MINECO grant MTM2014-57838-C2-1-P and Fundacion Seneca, Region de Murcia grant 19368/PI/14. The research of the third author is done in frames of Ukrainian Ministry of Science and Education Research Program 0115U000481. The research of the fourth author has been partially performed during her stay in University of Murcia in frames of Erasmus+ program. We thank the referee for his/her suggestions that helped to improve the original manuscript.